Search Results

Search found 14544 results on 582 pages for 'ssh config'.

Page 62/582 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

  • how to debug when xinetd says : got signal 17 (child exited)

    - by Faizan Shaik
    I am trying to start services vsftpd and sshd using xinetd. my config files are as follows. /etc/xinetd.conf defaults { instances = 60 log_type = FILE /var/log/xinetdlog log_on_success = HOST PID log_on_failure = HOST cps = 25 30 only_from = localhost } includedir /etc/xinetd.d /etc/xinetd.d/ftp service ftp { disable = no server = /usr/sbin/vsftpd server_args = -l user = root socket_type = stream protocol = tcp wait = no instances = 4 flags = REUSE nice = 10 log_on_success += DURATION HOST USERID only_from = 127.0.0.1 10.0.0.0/24 } /etc/xinetd.d/ssh service ssh { disable = no log_on_failure += USERID server = /usr/sbin/sshd user = root socket_type = stream protocol = tcp wait = no instances = 20 flags = REUSE only_from = 127.0.0.1 10.0.0.0/24 } Even though i've included only_from attribute, vsftp server as well as ssh server are refusing connection from localhost. while vsftp and ssh servers are working fine individually when i check with "service vsftpd start" and "service ssh start". when i did debug using "xinetd -d" throug terminal i got the output as 13/10/20@00:06:08: DEBUG: 3592 {cnf_start_services} Started service: ftp 13/10/20@00:06:08: DEBUG: 3592 {cnf_start_services} Started service: ssh 13/10/20@00:06:08: DEBUG: 3592 {cnf_start_services} mask_max = 8, services_started = 2 13/10/20@00:06:08: NOTICE: 3592 {main} xinetd Version 2.3.14 started with libwrap loadavg options compiled in. 13/10/20@00:06:08: NOTICE: 3592 {main} Started working: 2 available services 13/10/20@00:06:08: DEBUG: 3592 {main_loop} active_services = 2 13/10/20@00:06:16: DEBUG: 3592 {main_loop} select returned 1 13/10/20@00:06:16: DEBUG: 3592 {server_start} Starting service ftp 13/10/20@00:06:16: DEBUG: 3592 {main_loop} active_services = 2 13/10/20@00:06:16: DEBUG: 3607 {exec_server} duping 9 13/10/20@00:06:16: DEBUG: 3592 {main_loop} active_services = 2 13/10/20@00:06:16: DEBUG: 3592 {main_loop} select returned 1 13/10/20@00:06:16: DEBUG: 3592 {check_pipe} Got signal 17 (Child exited) 13/10/20@00:06:16: DEBUG: 3592 {child_exit} waitpid returned = 3607 13/10/20@00:06:16: DEBUG: 3592 {server_end} ftp server 3607 exited 13/10/20@00:06:16: DEBUG: 3592 {svc_postmortem} Checking log size of ftp service 13/10/20@00:06:16: INFO: 3592 {conn_free} freeing connection 13/10/20@00:06:16: DEBUG: 3592 {child_exit} waitpid returned = -1 both services are getting started but neither of them is working. after banging for 3-4 hours i still don't have any clue about this error. Any help would be appreciated. thanks!

    Read the article

  • Port 22 is not responding

    - by Emanuele Feliziani
    I'm trying to make the jump to VPS from shared hosting for better performances and greater flexibility, but am stuck with the fact that I can't access the machine via ssh. First of all, the machine is a CentOS 6.3 cPanel x64 with WHM 11.38.0. Sshd is running (it appears in the current running processes). Making a port scan I see that port 22 is not responding. Port 21 is, but I am not able to access the machine via ftp (I think it's a security measure, but I don't know where to disable/enable it). So, I'm stuck in WHM and have no way to access the configuration of the machine, neither via ssh nor with ftp/sftp. When trying to connect with ssh via Terminal I only get this: ssh: connect to host xx.xx.xxx.xxx port 22: Operation timed out I also tried to access with the hostname instead of the IP address and it's the same. There seem to be no firewall in WHM and I have whitelisted my home IP address to access ssh, though there were no restrictions in the first place. I have been wandering through all the settings and options in WHM for several hours now, but can't seem to find anything. Does anybody have a clue as to where I should start investigating? Update: Thanks everyone. It was in fact a matter of firewall. There was a firewall not controlled by the WHM software. I managed to crack into the console from the vps control panel (a terrible, terrible java app that barely took my keyboard input) and disabled the firewall altogether running service iptables stop so that I was able to access the console via ssh with the terminal. Now I will have to set up the firewall again because the command I ran looks like having completely wiped the iptables. Can you recommend any newby-friendly resource where I can learn how to go about this and what should I block? Or should I just go with something like this: http://configserver.com/cp/csf.html ? Thanks again to everyone who helped me out.

    Read the article

  • Access NFS share from cygwin?

    - by Jason Voegele
    We have a Windows 2003 Server on which we have installed Microsoft's Services for UNIX, and we have mounted a few NFS shares that contain shared resources that we need to access from this box. When I log in to this server with remote desktop, I am able to browse the contents of the NFS shares and everything works fine. However, one use case that we have is that we need to access this server using SSH, and still be able to access the NFS shares. We are running the Cygwin SSH daemon to provide SSH access to the server, but for some reason when we log in to the Windows 2003 server using SSH we can no longer access the NFS shares. To demonstrate, here is the output of the 'mount' command, first from a Cygwin shell when logged in with remote desktop: $ mount C:/cygwin/bin on /usr/bin type ntfs (binary,auto) C:/cygwin/lib on /usr/lib type ntfs (binary,auto) C:/cygwin on / type ntfs (binary,auto) C: on /cygdrive/c type ntfs (binary,posix=0,user,noumount,auto) O: on /cygdrive/o type nfs (binary,posix=0,user,noumount,auto) P: on /cygdrive/p type nfs (binary,posix=0,user,noumount,auto) Z: on /cygdrive/z type nfs (binary,posix=0,user,noumount,auto) And now, the same 'mount' command when logged in with SSH: $ mount C:/cygwin/bin on /usr/bin type ntfs (binary,auto) C:/cygwin/lib on /usr/lib type ntfs (binary,auto) C:/cygwin on / type ntfs (binary,auto) C: on /cygdrive/c type ntfs (binary,posix=0,user,noumount,auto) Notice the missing O: P: and Z: NFS shares in the latter. Can anyone tell me why I am unable to see these NFS shares when logged in with SSH? Thanks!

    Read the article

  • How to configure a Web.Config file to allow custom 404 handling while still displaying on-page 500 error detail?

    - by Mark
    To customize 404 handling and based on the hosting company's suggestion, we are currently using the following web.config setup. However, we quickly realized that with this configuration, any page error (500 error) are also getting redirected to this custom error page. How can I modify this config file so we can continue to handle 404 with custom file while still able to view on-page error? <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.webServer> <httpErrors errorMode="DetailedLocalOnly" defaultPath="/Custom404.html" defaultResponseMode="ExecuteURL"> <remove statusCode="404" subStatusCode="-1" /> <error statusCode="404" prefixLanguageFilePath="" path="/Custom404.html" responseMode="ExecuteURL" /> </httpErrors> </system.webServer> <system.web> <customErrors mode="On"> <error statusCode="404" redirect="/Custom404.html" /> </customErrors> </system.web> </configuration>

    Read the article

  • defunct dbus-daemon zombie freezes login for 30 seconds

    - by oldenburgb
    I'm running Ubuntu 12.04.2 LTS (Precise Pangolin) and noticed a 30 second delay whenever i log into my server via ssh or perform any kind of login via sudo on that machine. I can provoke immediate execution by killing the defunct dbus-daemon showing up during the delay: output of ps fax |grep dbus 19222 ? Ss 0:00 dbus-daemon --system --fork --activation=upstart 19752 ? Z 0:00 \_ [dbus-daemon] <defunct> taping into the dbus using dbus-monitor --system i'm getting: signal sender=org.freedesktop.DBus -> dest=(null destination) serial=7 path=/org/freedesktop/DBus; interface=org.freedesktop.DBus; member=NameOwnerChanged string ":1.4" string "" string ":1.4" each login. Stopping the dbus service eliminates this problem but probably causes many other... I'm not running xorg on the machine but the packages are present for X11 forwarding capabilities. I've ruled out the common motd script delay and ssh "UseDNS no" fixes one finds when looking up login delay issues. Many thanks in advance for any help with this, it's been driving me crazy ;-)

    Read the article

  • Using NX with no PasswordAuthentication SSH setup

    - by benmccann
    I'm trying to setup passwordless SSH access. My username is bmccann, so in /etc/ssh/sshd_config I added: PermitRootLogin no PasswordAuthentication no AllowUsers bmccann nx I ran ssh-keygen on the client and put ~/.ssh/id_rsa.pub from the client into ~/.ssh/authorized_keys on the server. I can now login with no password using the ssh command. However, I can no longer access the machine via NX as long as /etc/ssh/sshd_config has "PasswordAuthentication no". Server error logs: $ grep NX /var/log/messages Feb 11 01:25:51 bmccann-htpc NXSERVER-3.4.0-12[23552]: ERROR: Failed authentication. NXSsh exit status is:255 'NXNssUserManager::auth' Feb 11 01:25:51 bmccann-htpc NXSERVER-3.4.0-12[23552]: Failed SSHd authentication for user 'bmccann', to '127.0.0.1', port '22': 'NX> 204 Authentication failed.\n ' 'NXNssUserManager::auth' Feb 11 01:25:51 bmccann-htpc NXSERVER-3.4.0-12[23552]: ERROR: Error while trying to authenticate user:bmccann. NXNssUserManager::auth returned 255 'NXShell::handler_login' Feb 11 01:25:51 bmccann-htpc NXSERVER-3.4.0-12[23552]: ERROR: failed 'sshd authentication' for user 'bmccann' from '108.29.137.64'. NXShell::handler_login NXShell 373 What do I need to do to restore my NX access? Is there something I need to setup in the NX client so that it no longer asks me for a password?

    Read the article

  • Can only ssh when not using wifi

    - by AChrapko
    So I have 3 machines, a windows 7 desktop that is always wired to my router, osX laptop, and raspberry pi running debian linux. My router is a Linksys e1000 wireless N. My goal is to be able to ssh the raspi from any machine, while it is connected via wifi. My problem is that when trying to ssh from either the win7 or osX to the Pi it either times out, or gives an error: "ssh: connect to host 192.168.1.### port 22: No route to host" The only times that I have managed to connect to the pi from any machine were when it connected to the router via an Ethernet cable. Currently with win7 desktop wired, macbook wireless, and pi wireless tests give the following: win7 ping macbook: Destination host unreachable. macbook ping win7: Request timeout. win7 ping pi: Destination host unreachable. macbook ping pi: Request timeout. blah blah blah Plugging the macbook into the router with an Ethernet cable all communication between win7 and macbook works. Pings, ssh, ftp, smb ect... No changes to the pi, still no connections possible to or from any of the other 2 machines. Note All machines, are able to connect to the internet and ssh to the same machine on a completely different network, wired or over wifi. Plugging the Pi in with Ethernet (and macbook still wired) I can ssh to the pi from both win7 and macbook. I can ssh from the pi to macbook. All machines still able to connect the the off network machine. Also another little side note- I was playing warcraft 3 with my roommates the other day, and the only time they were able to see my LAN game was when they were plugged into the router with an Ethernet cable. Once or twice one of the laptops was able to connect over wifi, but not without another computer connecting first via Ethernet. So basically does anyone have any info as to why my router seems to completely ignore local wireless traffic?

    Read the article

  • Authenticate to VM using vagrant up

    - by utrecht
    Authentication failure during Vagrant Up, while vagrant ssh and ssh vagrant@localhost -p2222 works I would like to execute a shell script using Vagrant at boot. Vagrant is unable to Authenticate, while the VM has been started using vagrant up: c:\temp\helloworld>vagrant up Bringing machine 'default' up with 'virtualbox' provider... ==> default: Importing base box 'helloworld'... ==> default: Matching MAC address for NAT networking... ==> default: Setting the name of the VM: helloworld_default_1398419922203_60603 ==> default: Clearing any previously set network interfaces... ==> default: Preparing network interfaces based on configuration... default: Adapter 1: nat ==> default: Forwarding ports... default: 22 => 2222 (adapter 1) ==> default: Booting VM... ==> default: Waiting for machine to boot. This may take a few minutes... default: SSH address: 127.0.0.1:2222 default: SSH username: vagrant default: SSH auth method: private key default: Error: Connection timeout. Retrying... default: Error: Authentication failure. Retrying... default: Error: Authentication failure. Retrying... default: Error: Authentication failure. Retrying... default: Error: Authentication failure. Retrying... ... After executing CTRL + C it is possible to authenticate to the VM using vagrant ssh and ssh vagrant@localhost -p2222 Vagrant file I use the default Vagrantfile and I only changed the hostname: # -*- mode: ruby -*- # vi: set ft=ruby : # Vagrantfile API/syntax version. Don't touch unless you know what you're doing! VAGRANTFILE_API_VERSION = "2" Vagrant.configure(VAGRANTFILE_API_VERSION) do |config| # All Vagrant configuration is done here. The most common configuration # options are documented and commented below. For a complete reference, # please see the online documentation at vagrantup.com. # Every Vagrant virtual environment requires a box to build off of. config.vm.box = "helloworld" ... Vagrant version c:\temp\helloworld>vagrant --version Vagrant 1.5.1 Question How to authenticate to VM using vagrant up?

    Read the article

  • Add user in CentOS 5

    - by Ron
    I created a new user in my CentOS web server with useradd. Added a password with passwd. But I can't log in with the user via SSH. I keep getting 'access denied'. I checked to make sure that the password was assigned and that the account is active. /var/log/secure shows the following error: Aug 13 03:41:40 server1 su: pam_unix(su:auth): authentication failure; logname= uid=500 euid=0 tty=pts/0 ruser=rwade rhost= user=root Please help, Thanks Thanks for the responses so far: I should add that it is a VPS on a remote computer, fresh out of the box. I can log in as the root user quite fine. I can also su to the new user, but I cannot log in as the new user. Here is my sshd_config file: # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. #Port 22 #Protocol 2,1 Protocol 2 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 768 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH SyslogFacility AUTHPRIV #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 #RSAAuthentication yes #PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no PasswordAuthentication yes # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes ChallengeResponseAuthentication no # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no GSSAPIAuthentication yes #GSSAPICleanupCredentials yes GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication mechanism. # Depending on your PAM configuration, this may bypass the setting of # PasswordAuthentication, PermitEmptyPasswords, and # "PermitRootLogin without-password". If you just want the PAM account and # session checks to run without PAM authentication, then enable this but set # ChallengeResponseAuthentication=no #UsePAM no UsePAM yes # Accept locale-related environment variables AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no X11Forwarding yes #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes #UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #ShowPatchLevel no #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner /some/path # override default of no subsystems Subsystem sftp /usr/libexec/openssh/sftp-server

    Read the article

  • Add user in CentOS 5

    - by Ron
    I created a new user in my CentOS web server with useradd. Added a password with passwd. But I can't log in with the user via SSH. I keep getting 'access denied'. I checked to make sure that the password was assigned and that the account is active. /var/log/secure shows the following error: Aug 13 03:41:40 server1 su: pam_unix(su:auth): authentication failure; logname= uid=500 euid=0 tty=pts/0 ruser=rwade rhost= user=root Please help, Thanks Thanks for the responses so far: I should add that it is a VPS on a remote computer, fresh out of the box. I can log in as the root user quite fine. I can also su to the new user, but I cannot log in as the new user. Here is my sshd_config file: # $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. #Port 22 #Protocol 2,1 Protocol 2 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 768 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH SyslogFacility AUTHPRIV #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes #StrictModes yes #MaxAuthTries 6 #RSAAuthentication yes #PubkeyAuthentication yes #AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no PasswordAuthentication yes # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes ChallengeResponseAuthentication no # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no GSSAPIAuthentication yes #GSSAPICleanupCredentials yes GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication mechanism. # Depending on your PAM configuration, this may bypass the setting of # PasswordAuthentication, PermitEmptyPasswords, and # "PermitRootLogin without-password". If you just want the PAM account and # session checks to run without PAM authentication, then enable this but set # ChallengeResponseAuthentication=no #UsePAM no UsePAM yes # Accept locale-related environment variables AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no X11Forwarding yes #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes #UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #ShowPatchLevel no #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner /some/path # override default of no subsystems Subsystem sftp /usr/libexec/openssh/sftp-server

    Read the article

  • Trying to access App.config file for mail settings but fails to work.

    - by mw
    Hello we have a Business Logic Layer which has an Email Services Class. In this class we have a method which will create an email(This part works and compiles fine). However when we try to access the app config file in order to test the method we get an error saying - Can't retrieve the app config mail settings and says all values are null when they are not. Here is the app config section for our code: <mailSettings> <smtp deliveryMethod="Network" from="[email protected]"> <network host="localhost" port="25" defaultCredentials="true"/> </smtp> </mailSettings> Here is there code we use to connect to the app.config: private System.Net.Configuration.MailSettingsSectionGroup mailSettings; SmtpClient client = new SmtpClient(mailSettings.Smtp.Network.Host, mailSettings.Smtp.Network.Port); What are we doing wrong here?

    Read the article

  • Apache2 config variable is not defined

    - by Kurt Bourbaki
    I installed apache2 on ubuntu 13.10. If I try to restart it using sudo /etc/init.d/apache2 restart I get this message: AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1. Set the 'ServerName' directive globally to suppress this message So I read that I should edit my httpd.conf file. But, since I can't find it in /etc/apache2/ folder, I tried to locate it using this command: /usr/sbin/apache2 -V But the output I get is this: [Fri Nov 29 17:35:43.942472 2013] [core:warn] [pid 14655] AH00111: Config variable ${APACHE_LOCK_DIR} is not defined [Fri Nov 29 17:35:43.942560 2013] [core:warn] [pid 14655] AH00111: Config variable ${APACHE_PID_FILE} is not defined [Fri Nov 29 17:35:43.942602 2013] [core:warn] [pid 14655] AH00111: Config variable ${APACHE_RUN_USER} is not defined [Fri Nov 29 17:35:43.942613 2013] [core:warn] [pid 14655] AH00111: Config variable ${APACHE_RUN_GROUP} is not defined [Fri Nov 29 17:35:43.942627 2013] [core:warn] [pid 14655] AH00111: Config variable ${APACHE_LOG_DIR} is not defined [Fri Nov 29 17:35:43.947913 2013] [core:warn] [pid 14655] AH00111: Config variable ${APACHE_LOG_DIR} is not defined [Fri Nov 29 17:35:43.948051 2013] [core:warn] [pid 14655] AH00111: Config variable ${APACHE_LOG_DIR} is not defined [Fri Nov 29 17:35:43.948075 2013] [core:warn] [pid 14655] AH00111: Config variable ${APACHE_LOG_DIR} is not defined AH00526: Syntax error on line 74 of /etc/apache2/apache2.conf: Invalid Mutex directory in argument file:${APACHE_LOCK_DIR} Line 74 of /etc/apache2/apache2.conf is this: Mutex file:${APACHE_LOCK_DIR} default I gave a look at my /etc/apache2/envvar file, but I don't know what to do with it. What should I do?

    Read the article

  • How do I implement page authorizaton in ASP.NET using a SQL store instead of web.config?

    - by drachenstern
    For instance, the way we're doing it now is like thus: (in the web.config) <location path="somePath"> <system.web> <authorization> <allow roles="approvedRoles"/> <deny users="*"/> </authorization> </system.web> </location> And what I would like to do instead is to store this information in SQL somewhere so that we can manipulate the information more easily. But we want to keep the same functionality that having the information in web.config provides, just like we can use a SqlRoleProvider instead of hardcoding roles in the app. So in other words, if a user currently tries to goto "somePath" and they're not a member of "approvedRoles" then they get redirected back to default.aspx, and if they are a member of "approvedRoles" then they get the page. I want to do the same thing, but without using web.config as the authorization mechanism. So what I'm NOT asking is how do I go about defining roles, or how do I handle logging in to the database, but specifically how do I store the above information in SQL instead of web.config. Actually, I'll take "anywhere but web.config" for now. Any ideas? Is this possible using a "Provider" class? I'm just looking for pointers on what to inherit and maybe some technet documentation. In this regard my googlefoo is lacking since I don't really know where to point. Am I really only looking for AzMan? Is this location-authorization-via-SQL already defined in the default aspnetdb somewhere and I'm missing it? For that matter, has this question already been asked on SO and I've missed it? What would you google?

    Read the article

  • php error: unexpected T_OBJECT_OPERATOR.... trying to install magento using ssh commands to dreamhos

    - by Jane
    I am trying to install magento (e-commerce platform) I am following a tutorial that tells me to run this command using ssh: ./pear mage-setup but i'm getting this error: Parse error: syntax error, unexpected T_OBJECT_OPERATOR in /home/domainname.com/downloader/pearlib/php/System.php on line 400 Line 400 is commented in the code snippit from the system.php file: /* Magento fix for set tmp dir in config.ini */ if (class_exists('Maged_Controller',false)) { /*line 400 */ $magedConfig = Maged_Controller::model('Config',true)->load();** if ($magedConfig->get('use_custom_permissions_mode') == '1' && $mode = $magedConfig->get('mkdir_mode')) { $result = System::mkDir(array('-m' . $mode, $tmpdir)); } else { $result = System::mkDir(array('-p', $tmpdir)); } if (!$result) { return false; } } Can anyone help my demystify this error?

    Read the article

  • How do I set a single virtual directory of my web app to not inherit web.config?

    - by Ryan
    I have a virtual directory setup in one of my web apps that needs to not inherit the web.config of the main app so it can run on it's own. I am wondering how I can do this because right now when I hit it (mainwebapp.domain.com/virdir) it throws an error saying it can't find some dependencies that are listed in the main apps web.config (shows main app web.config in the error message), this virdir contains it's own little app that needs to just run standalone.

    Read the article

  • Clean install of IIS 6 on Windows Server 2003 ignoring 'web.config'?

    - by Vario
    Hi, Any help with this would be really appreciated! As the title suggests, I'm running a brand new install of Windows Server 2003 and IIS 6 and I'm basically attempting to mirror a live web server onto a new internal development server, which runs the same setup. It's an ASP.NET site that relies heavily on URL rewriting (using Intelligencia). ASP.NET is set to run on v2.0.50727 on both servers. I've tried intentionally introduce syntax errors into the web.config and it just appears to be ignoring them completely, so given IIS 6 doesn't read the web.config, the rest of the site doesn't work at all (I get a 404 error, as a 'Default.aspx' doesn't exist since the web.config handles the default page rewriting). Having looked at the Application Mapping, '.config' files are set to use the default 'c:\windows\microsoft.net\framework\v2.0.50727\aspnet_isapi.dll' which exists. Is there anything else I may be missing? Thanks in advance.

    Read the article

  • How do I get the F1-F12 keys to switch screens in gnu screen in cygwin when connecting via SSH?

    - by Mikey
    I'm connecting to a desktop running cygwin via SSH from the terminal app in Mac OS X. I have already started screen on the cygwin side and can connect to it over the SSH session. Furthermore, I have the following in the .screenrc file: bindkey -k k1 select 1 # F1 = screen 1 bindkey -k k2 select 2 # F2 = screen 2 bindkey -k k3 select 3 # F3 = screen 3 bindkey -k k4 select 4 # F4 = screen 4 bindkey -k k5 select 5 # F5 = screen 5 bindkey -k k6 select 6 # F6 = screen 6 bindkey -k k7 select 7 # F7 = screen 7 bindkey -k k8 select 8 # F8 = screen 8 bindkey -k k9 select 9 # F9 = screen 9 bindkey -k F1 prev # F11 = prev bindkey -k F2 next # F12 = next However, when I start multiple windows in screen and attempt to switch between them via the function keys, all I get is a beep. I have tried various settings for $TERM (e.g. ansi, cygwin, xterm-color, vt100) and they don't really seem to affect anything. I have verified that the terminal app is in fact sending the escape sequence for the function key that I'm expecting and that my bash shell (running inside screen) is receiving it. For example, for F1, it sends the following (hexdump is a perl script I wrote that takes STDIN in binmode and outputs it as a hexadecimal/ascii dump): % hexdump [press F1 and then hit ^D to terminate input] 00000000: 1b4f50 .OP If things were working correctly, I don't think bash should receive the escape sequence because screen should have caught it and turned it into a command. How do I get the function keys to work?

    Read the article

  • File Transfer with a double SSH login.

    - by Harpal
    I'm have trouble transfering files again from my work PC, which is a linux machine to my home windows PC. My work has changed it so I now need to SSH twice before I can access my PC. So I need to: ssh [email protected] password: xxxxx I then need to do it again. ssh computer_name password: xxxxx I've tried accessing directly via my computers IP but to of no avail. Is there a way I can use pscp or file zilla to ssh twice so I can transfer files?

    Read the article

  • Codeigniter return config file as array with autoload enabled

    - by Fverswijver
    So I'm using CodeIgniter to build a website and I've made it so that all my specific settings are stored in a config file that's automatically loaded. I've also built a page that loads the settings file, makes a nice little table and allows me to edit everything from that page, afterwards it saves the entire page again (I know I could've done the same with a database but I want to try it this way). My problem is that I can't seem to use this bit when autoloading of my config file is enabled, but when I disable autoloading I can't seem to manually load it, it never finds my variables. So what I'm doing here is just taking all values from the config file and putting them in a single array so I can pass this array onto my settings administration page (edit/show all settings). $this->config->load('site_settings', TRUE); $data['settings'] = $this->config->item('site_settings'); ... $this->load->view('template', $data); config/site_settings.php <?php if ( ! defined('BASEPATH')) exit('No direct script access allowed'); $config['header_img'] = './img/header/'; $config['copyright_text'] = 'Copyright Instituto Kabu'; $config['copyright_font'] = './system/fonts/motoroil.ttf'; $config['copyright_font_color'] = 'ffffff'; $config['copyright_font_size'] = '32';

    Read the article

  • Prompt not working when logged in as specific user

    - by Clay
    Hello I am running ubuntu 11.10 and access it via ssh with putty. My problem is that when I log in I get the prompt [email protected]:~$ and my arrow keys do what the y are supposed to. When I try to login in as another user account I made all I get is this as the prompt it never says the directory or anyting $ Also when ever I try to use the left, right, up or down arrow I get a character like this ^[[A Is this a bug in putty or did I just not set the account up right?

    Read the article

  • Is syncing private keys a good idea?

    - by Jacob Johan Edwards
    Ubuntu One's Security FAQ indicates that Canonical encrypts connections and restricts access to user data. This all well and fine, and I do trust SSL for online banking and other things more valuable than my private keys. That said, I am quite anxious about putting my ~/.ssh/id_dsa up in the cloud. Obviously, no system is totally secure. Could some knowledgeable party, then, pragmatically quantify the risks?

    Read the article

  • How do I change my username?

    - by Takkat
    Some time ago when I installed Ubuntu I chose a rather stupid username for my account that I do not want to use anymore. How do I change this (including the name of my home directory) without loosing settings for applications? How do I keep permissions and my keys for various authentification (e.g. email, SSH, GPG and more)? What settings could possibly get lost if I changed my username? Both, command-line and graphical solutions are appreciated.

    Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >