Search Results

Search found 20869 results on 835 pages for 'things i hate'.

Page 620/835 | < Previous Page | 616 617 618 619 620 621 622 623 624 625 626 627  | Next Page >

• Good Hosting Providers With Zend Framework Support [closed]

  - by manyxcxi

  I currently use ixwebhosting for my hosting services. They're cheap and work (most of the time). The databases are horribly slow, the servers are horribly slow, and their support (though usually prompt) is tough to deal with. That being said, they're cheap, I've got like 20 domains hosted in my account, none of them are high volume, and they work JUST good enough- until today. This isn't meant to be a condemnation of ixwh though. Their prices are very low for what they do offer and most things work just fine, most of the time. I need to be able to host web apps written with Zend Framework in a fairly easy fashion. The server performance can't be worse than what I've already had (a pretty low hurdle to clear), and I don't want to spend $30/mo. These are not money making websites- they're projects. My requirements are PHP 5.3, ZF support, MySQL databases, multiple domains- not much. Who should I look at, and who should I look out for?

  Read the article

• Windows 7 explorer crashing trying to read external hard disk

  - by Mario De Schaepmeester

  I have a 1TB Western Digital hard drive which is almost full and last time I tried to plug it into my laptop, I got a Windows dialog saying "this hard drive needs to be formatted". I did not panic because I have experienced things like this before and I know it's often solved by simply re-inserting the drive. Now however, whenever I plug it in and try to browse it in explorer by going to "computer", the explorer process crashes after a while. I simply close explorer since it takes ages trying to read the disk and nothing happens. After searching on the internet, the best thing to do would be a chkdsk. I tried it via properties in explorer (which also took a good 5 minutes to open up), locks up as well, after waiting a couple of minutes it says there's no access to the disk so a chkdsk is not possible... I want to make clear that I always use safe removal before pulling out the USB cable. Last time however, safe removal just would not work and when trying to shut down Windows, the logoff screen just would not disappear (I've waited at least 10 minutes or so) and I powered off the PC by force. This may be the cause of the problems but the disk was still recognised immediately after that. I really don't want to format this thing because it contains C: clones of 3 computers and a lot of other stuff that I don't want to re-copy. What would be the best course of action? Update I got chkdsk working via the command line. I used the /F and /R options. I already got a bunch of lines saying "file record segment X is unreadable" or whatever it is in English, my OS is Dutch. It looks bad... Will chdsk repair these errors?

  Read the article

• Youtube has no voice but the music continues just fine?

  - by Prix

  PC CONFIG: gigabyte EP45C UD3R with the realtek HD onboard 4gb dual channel Qcore 2.83ghz When i watch to videos on youtube now the voice some times is in static and some times so low that you can hear it while the sound continues just fine... For example if can hear to things like guitar or a train etc but the voice of whoever is speaking is gone or very low or pure static when watching the videos. I know some videos have a really great quality and some are HD 1080p so this was something not expected to happen. I can aswell play videos on my WMP11 just fine i have ccc-p installed also tried k-lite, both on the latest stable avaiable. I havent tried anything else related to flash but something is either wrong with my drivers or youtube. I have installed the latest drivers to make sure they are up-to-date but this didnt help either. What i have tried so far: removed the audio drivers and re-installed remove any codec pack i had and re-installed k-lite, test, didnt worked remove any codec pack i had and re-installed cccp, test, didnt worked checked the control panel sound configurations, tried chaging to phone stereo, to 5.1 which is what my headphone is. checked the realtek manager, tried changing the sound channels from 2CH to 6CH to reflect my headphone, didnt work. rebooted after every change of the above tries. tried chrome, firefox and internet explorer with the same results didnt w

  Read the article

• Access 2010 datasheet view only/relationships unavailable

  - by Luis

  I'm relatively new to MS Access in general and just started working with Access 2010. I've created a new web database with a few tables that I need to relate. First problem: For the life of me, I can't view anything in any view other than datasheet view; everywhere I would expect to be able to change the view, only datasheet view is available. Second problem: I can't change the primary key(s). Presumably I would be able to do this if I could get out of datasheet view and into design view. Third problem: The 'Relationships' button is greyed out. I know these appear to be really simple things but I've been looking for much more time than I'd like to admit trying to figure out how to get unstuck. Update: It would appear that this is happening because it is a 'web database' as I've been able to do all of the above in a new regular database. With this in mind let me ask a different question: Am I able to add relationships and change primary keys in a web database? If so how? More generally, what is the point of a web database?

  Read the article

• cheap gigabit switch for small business

  - by neoice

  my friend's business is currently borrowing my Adtran 1224R and is very happy with it. it's configured with a few VLANs to segment customers, internal traffic and public wifi. port 1 is a "trunk" port to the router, a chunky Linux box with iptables+NAT. they push a lot of traffic over the LAN (data backups) and really need gigabit. besides, I'd like my Adtran back :P my goal is to find a cheap(ish) switch that can function as a drop-in replacement. it looks like VLAN trunking is actually part of the 802.1q spec, so anything with VLAN support should cover the current trunk-to-router setup. it's nice to have both a web interface and SSH, but I can configure it either way if needed. things like the Netgear GS724T have caught my eye, but it seems like none of the hardware in the $300-500 range have really solid reviews. I'm concerned that "cheaper" hardware might not work for a network full of power users. does anyone have a recommendation for the Netgear GS724T or a switch that will meet my needs?

  Read the article

• openvpn in a bridge?

  - by sebelk

  I have a somewhat tricky proble to solve. We have a wireless link between 2 building. One of them has an mikrotik and below there are some vlans. Some machines of one vlan need to use openvpn to connect to a remote private lan. I put a TP-Link WR1043ND (which those machines connect to) with openwrt with ebtables just in case I need it. I've configured openwrt in such a way that all ports belongs to the same vlan. My idea was to make things as transparent as I can. It has a bridge as follows: usr/sbin/brctl-full show br-lan bridge name bridge id STP enabled interfaces br-lan 8000.f8d111565716 no eth0.1 eth0.2 Also I've added an ebtables rule: ebtables -t broute -A BROUTING -p ipv4 -j DROP So "bridge" has only one IP address. I've installed openvpn and I'm trying to bring up the tunnel but I can't still get working. Sure, someone can says why don't you use the vpn on the mikrotik, there are some reasons, the first one is I have little experience with mikrotik and I'd want to have the vpn at hand :) The problem is that openvpn is not working, because it is complaining that I have only one Ip Address on the server side. So I set up and alias interface with another IP address but is not working either: : Rejected connection attempt from IP-Client-Side:37801 due to --remote setting Is there a way to make it work?

  Read the article

• My laptop screen keeps dimming

  - by Rowland

  I have a Cryo laptop with Windows 7 installed, bought in December 2011. Sometimes the screen seems to persistently dim and/or brighten up, even as I am doing things. In fact the brightness is varying even as I type this. The battery is always fully charged and connected to the mains. I have checked many times the battery/power-saving settings always leaving the settings the same way; full brightness and never dimming when on the mains. Yet when the screen starts playing up I can end up with the screen dimming and brightening almost continuously. I once went to the "adjust screen brightness" window when the screen had dimmed. I found the brightness slider on 100% (as I expected) but, as I dragged it to the left, to dim the screen, it first brightened and then started dimming, i.e. the screen setting said 100% brightness but it was only at, maybe 80%. I have checked with Cryo and they just say check the power settings. I know what these are and how to work them and always set them to never dim/full brightness, yet still my laptop starts this dimming every so often.

  Read the article

• Lenovo System Update Breaks Windows Live

  - by wolfvilleian

  Hey everyone, I've been racking my brain (and fingers from typing) trying to solve this issue to no avail. I have a Lenovo computer and I install their system update tool to install all my missing drivers. However after this tool is installed Windows Live 2011 breaks, it will no longer sign in giving error number 8e5e0247 all the solutions online haven't helped. It appears that a language setting somewhere gets set to en_ms, and I'm en_ca. My computer is running Windows 7 x64. When i try to sign onto messenger it gives an error that (with some research) means your locale or language is not supported, I've searched my computer for any reference to en_ms but find none. Also a few other things seem to have broken, When a UAC box comes up it is no longer able to identify the publisher of anything, and also the indexing service does not work (I'm not sure if the indexing issue is related, but the UAC issue happened right after installation), I had this issue before but I don't remember how I fixed it, I believe it had something to do with environmental variables. When it goes to sign in it gets as far as the "Loading contacts" then stops and goes back to the sign in screen. Has anyone seen this before? Thanks

  Read the article

• if I define `my_domain`, postfix does not expand mail aliases

  - by Norky

  I have postfix v2.6.6 running on CentOS 6.3, hostname priest.ocsl.local (private, internal domain) with a number of aliases supportpeople: [email protected], [email protected], [email protected] requests: "|/opt/rt4/bin/rt-mailgate --queue 'general' --action correspond --url http://localhost/", supportpeople help: "|/opt/rt4/bin/rt-mailgate --queue 'help' --action correspond --url http://localhost/", supportpeople If I leave postfix with its default configuration, then the aliases are resolved correctly/as I expect, so that incoming mail to, say, [email protected] will be piped through the rt-mailgate mailgate command and also be delivered (via the mail server for ocsl.co.uk (a publicly resolvable domain)) to [email protected], user2, etc. The problem comes when I define mydomain = ocsl.co.uk in /etc/postfix/main.cf (with the intention that outgoing mail come from, for example, [email protected]). When I do this, postfix continues to run the piped command correctly, however it no longer expands the nested aliases as I expect: instead of trying to deliver to [email protected], user2 etc, it tries to send to [email protected], which does not exist on the upstream mail server and generates NDRs. postconf -n for the non-working configuration follows (the working configuration differs only by the "mydomain" line. alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 html_directory = no inet_interfaces = all inet_protocols = all mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost mydomain = ocsl.co.uk newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop unknown_local_recipient_reject_code = 550 We did have things working as we expected/wanted previously on an older system running Sendmail.

  Read the article

• running a laptop continuously

  - by intuited

  I have an experienced laptop — a Dell Latitude D400, with a Pentium M CPU — that I'd like to run as an always-on server. This model was launched in 2004; I got mine second-hand in about 2007. I've heard that continuous operation is generally not a good idea with consumer hardware, but am lacking in specific knowledge about related problems, and have little idea of how much such usage patterns would reduce the lifespan of the machine. I'm mostly concerned with the unit's core components; parts such as the hard drive which are readily replaceable are, well, readily replaceable. What sorts of things can I do to increase the lifespan of this machine under such circumstances? For example, I'm guessing that it would be wise to limit the CPU frequency or take other steps to keep the internal temperature low. However, I'm not sure where the point of diminishing returns would lie with such an approach — 50°C? 40°C? Would it be useful to suspend the machine periodically, for perhaps an hour each day, or a few hours each week?

  Read the article

• RSS "Newspaper" / Google Reader replacement

  - by Sean D

  With the impending demise of Google Reader I've been looking at ways to replace it. I've decided that what might be cool is to get an email every morning, with all the updates from the last twenty-four hours, maybe in the style of a newspaper. That's not a very original idea, since sites like http://fivefilters.org/pdf-newspaper/ and http://feedjournal.com/ already do this, but they both have various drawbacks. In particular both require a single feed, will just take the last n items, and clicking around on their website. The Pro option for feedjournal seems almost like it would do the job, but the project seems to be dead, and there's no way to buy it. Before I hack together something crazy I'd like to know if there's a better solution to my problem. In short: I want to replace Google Reader with a daily pdf email, how should I do this? edit: I didn't award the bounty because nobody solved the problem (not that I'm assuming it has a solution). Answers like "well for the way I do things this wouldn't work" aren't actually helpful, even if they are well-meaning.

  Read the article

• Samba access works with IP address only

  - by Sebastian Rittau

  I added a Debian etch host (hostname: webserver, IP address: 192.168.101.2) running Samba to a Windows network with a Windows 2003 PDC (IP address 192.168.101.3). The Samba server exports a public guest share, called "Intranet". The server shows up fine in the network, but trying to click on it produces an error dialog, stating I don't have the necessary permissions. So does entering \webserver manually and using \webserver\internet states that the path does not exist. Interestingly, accessing the share by IP address (\192.168.101.2 or \192.168.101.2\intranet) works fine. DNS is configured correctly, and "smbclient //webserver/intranet" on another Linux client works fine. One complicating issue is that the webserver is only a VMware virtual machine running on PDC server. Here is our smb.conf: [global] workgroup = Foobar server string = Webserver wins support = yes ; commenting out these wins server = 192.168.101.3 ; two lines has no effect dns proxy = no guest account = nobody [... snipped some unrelated bits, like logging ...] security = share [... snipped some password-related things ...] domain master = no [intranet] comment = Intranet path = /srv/webserver/contents browseable = yes guest ok = yes guest only = yes read only = yes create mask = 0775 directory mask = 0775

  Read the article

• Fake demostration software for command line

  - by Joe

  I'm looking for some software that would be useful for giving demonstrations. I regularly have to show the effects of scrips ect to classes while talking about their effects, and equaly regularly I have finger trouble and have to rewrite various commands - wasting class time and general energy. I'd like to be able to record a sequence of commands in advance, and then play them back at the speed of my choosing. So I might have a file that containes the commands: echo "hello world!" ls ls -l ls -l | sort I'd like to be able to play these commands back by typing similar ones in. So I'd have a blinking command prompt and if I typed 'echo "hxxx' the command prompt would read home$echo "hell and if I typed any other letters the terminal would fill up with the remainder of the command until I press enter, when it executes the command. The point is that even if I screw up the command when typing it, the command that I'd prepared in advance would be executed. My question is - does similar software exist for giving demonstrations? or even, is this an easy thing to script up...? EDIT - two quick things first of all I'm on osx - but it would be nice to get a general solution for other people who arrive here from google. and second a lot of the comments/answers are concentrating on, in effect, making it fast and easy to enter long commands by means of hotkeys and the like. Actually I'd like it to at least look like I'm typing live - that's why I put in the bit about the one-to-one keymapping, but I don't think I explained that quite as well as I could have...

  Read the article

• How should I configure backup of my server?

  - by ed209

  I have just rented a dedicated server. If it helps this is the config I have: CPU1 Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (Cores 8) RAM 15975 MB Disk /dev/sda doesn't contain a valid partition table (=> /dev/sda doesn't) Disk /dev/sdc doesn't contain a valid partition table (=> /dev/sdc doesn't) Disk /dev/sdb doesn't contain a valid partition table (=> /dev/sdb doesn't) Disk /dev/sda: 120.0 GB (=> 114 GIB) Disk /dev/sdc: 3000.6 GB (=> 2861 GIB) Disk /dev/sdb: 3000.6 GB (=> 2861 GIB) /dev/sda is a 120GB SSD. This is where I have Ubuntu/lamp installed. It's the drive that will run my site. With the account I got two other drives of 3000GB each which I really don't need but they came with the account. I figured I could use these to back up my main 120gb drive. So a couple of things I wondered were: Should I use these for backups? How should I back up. The data I want to back up is a user uploads directory full of images and the database. Everything else is either in a code repo or backed up some other way. For example, it would be nice to know there is a disk image of the 120gb drive somewhere that I can copy over should there be any problems but equally I don't mind doing a fresh install of all the software and copying over just the images and database dump. Thanks for your advice! (also, happy to not use the two other drives and backup elsewhere if it's more sensible)

  Read the article

• Virtual Host Configuration and mod_rewrite - Removing PHP Extension and Adding Forward Slash

  - by nicorellius

  On my production server, things are fine: PHP extension removal and trailing slash rules are in place in my .htaccess file. But locally, this isn't working (well, partially, anyway). I'm running Apache2 with a virtual host for the site in question. I decided to not use the .htaccess file in this case and just add the rules to the httpd-vhosts.conf file instead, which, I've heard, if possible on your server, is a better way to go. The virtual host is working and the URL I use for my site is like this: devserver:9090 Here is my httpd-vhosts.conf file: NameVirtualHost *:9090 # for stuff other than this site <VirtualHost *:9090> ServerAdmin admin@localhost DocumentRoot "/opt/lampstack/apache2/htdocs" ServerName localhost </VirtualHost> # for site in question <VirtualHost *:9090> ServerAdmin admin@localhost DocumentRoot "/opt/lampstack/apache2/htdocs/devserver" ServerName devserver <Directory "/opt/lampstack/apache2/htdocs/devserver"> Options Indexes FollowSymLinks Includes AllowOverride None Order allow,deny Allow from all </Directory> <IfModule rewrite_module> RewriteEngine ON # remove PHP extension and add trailing slash # note - this doesn't work for directories, and throws 404 # TODO - fix so directories use index.php RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{THE_REQUEST} ^GET\ /[^?\s]+\.php RewriteRule (.*)\.php$ /$1/ [R=302,L] RewriteCond %{REQUEST_FILENAME} !-d RewriteRule (.*)/$ /$1.php [L] RewriteCond %{REQUEST_FILENAME}.php -f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule .*[^/]$ /$0/ [R=302,L] </IfModule> # error docs ErrorDocument 404 /errors/404.php </VirtualHost> The problem I'm facing is that when I go to directories on the site, I get a 404 error. So for example, this: devserver:9090/page.php goes to devserver:9090/page/ but going to a directory (that has an index.php): devserver:9090/dir/ throws 404 error page. If I type in devserver:9090/dir/index.php I get devserver:9090/dir/index/ and the contents I want appear... Can anyone help me with my rewrite rules?

  Read the article

• Performance-optimizing Oracle 10g on a server that is also a Tomcat JSP app server?

  - by PKHunter

  I have inherited a simple RedHat 5 - 64bit platform. It has SCSI disks on RAID1, with 16GB of RAM. Double Core CPU. Oracle 10g, Release 2. This would be a decent platform for running the DB only, perhaps, but the same server in an "A-A mode" clustering (very simple) also runs Tomcat and there are several Java servlets running on this. Sadly there is no caching platform etc. We only use an external CDN for some html caching. I am personally more familiar with web environments on the LAMPP platform (apache, php, mysql, postgresql). PROBLEM: Because the server has both Tomcat JSP/Java and Oracle 10g running on the same server, with no caching, I have some issues of the server going down. Often, sadly. QUESTION: What are my options in terms of improving performance of all these different apps? Connection Pooling? Example, in Postgresql world we have PgBouncer, which really helps things. Does Oracle have something similar? Or is there a famous Java-based external pooler that people use in production environments? (I'm not familiar with Java) Any "SQL cache" as in the MySQL and Postgresql world? Any other kind of application cache, as "APC" or "eAccelarator" in the PHP world? The "OSCache" stuff from the Java world (JSP thingie I found on Google: http://onjava.com/pub/a/onjava/2005/01/05/jspcache.html?page=2) ... What else? Sorry if this is a noob question. I have googled and googled, but problem is I don't know what to google for, other than the broad general concepts above. So if not full answers, I would even appreciate basic pointers and I am happy to JFGI myself. Thanks!

  Read the article

• What is the correct approach i should use for an application that requires amazon S3 uploads and SimpleDB data management?

  - by Luis Oscar

  I am developing an application for iOS and that is going smoothly, the problem is that I am very new at server sided things. I am totally confused about how to correctly use Amazon Web Services for this purpose. What I want to do is very simple. I want my application to be able to query a servlet hosted in EC2 to be able to retrieve pictures and data based on some criteria from S3 and SImpleDB respectively. Also the application should be able to upload pictures into a S3 bucket and register the information in the SImpleDB. My main concerns are security and costs, So far i was using Amazon Token Vending Machine but I haven't been successful when trying to customize it, and while researching I discovered that on the long run it is very expensive. The ultimate goal is to handle a "social" picture service for my iOS application. Being able to register new users, authenticate these users. See what permissions they have to which pictures from the bucked. And all this without having to worry about Third party people from accessing the private pictures of my users. Sorry for this question but I am really clueless about how to handle this... I have tried reading many articles but all these server stuff looks very scary.

  Read the article

• How to change the MAC address in Win 8 to spoof a Roku Player through a WiFi splash page?

  - by luser droog

  My Linux laptop died yesterday and now I can't watch TV. Let me explain. I use a Roku Player to stream Netflix shows to my television; and a year or two ago, the Internet Service provided in my apartment complex added a Splash Page to get through the router and onto the net. After not too many days, I remembered that internet devices identify themselves with a MAC address. So I delved into the manpage of ifconfig and discovered that I could persuade my laptop to pretend to be the Roku Player, connect, click through the Splash Page, disconnect and change it back. This would allow the Roku to connect for about 24 hours, when I would have to do it again. But the laptop died yesterday during my smoke break. So during lunch, I ran to OfficeMax and got a new one. But I don't know where to begin looking for where to change the MAC address (assuming it's possible). I know I can try dual-boot, or a keychain OS, or possibly other things to resurrect my old method. But, is it possible to get Windows do it?

  Read the article

• 3-4 old computers = general purpose cluster?

  - by TheLQ

  I have 3 old computers lying around right now running a P2 at 800 MHz(?), Intel Mobile 1.6 GHz, AMD Athlon XP 2000+ at 1.66 GHz, and (might not use this) P4 at 2.7 GHz, all with 512 MB Ram, and am considering clustering them together for fun/knowledge. They would be running an undecided version of linux, preferably ubuntu based. The issue is what I want to use it for: general computing and occasional video encoding. By general computing I mean day to day tasks. However I'm not sure if every program started by a single X session is going to exist on the same machine, defeating the purpose of such a system. Will programs be split up or exist on one machine? Second, assuming this is running 100baseT ethernet (not sure if the PCI slot itself could handle Gigabit), would the speed of having a program exist over the network be an issue? It seems that the constant asking of various things in RAM would be quite slow. And before you say "buy another computer!", that's not the point of this question. I'm asking would it be usable, not necessarily practical. And yes I know, this is going to be extreamly power consuming.

  Read the article

• Siege - running a stress test benchmark

  - by morgoth84

  I need to do a benchmark test of a HTTPS server using Siege, to see how it behaves under massive load. I'm initiating tests from another machine which is quite powerful and it is connected to the same physical switch the server is connected on. But when I initiate a test, I can't get it to make more than 170 requests per second. With this load the server's CPU usage is at 15-20% and the average response time for a request is approx. 0.03 seconds. Load of the client machine is approx. at 10%. So, I gradually increase the number of users in Siege (the number of worker threads) and request rate linearly increases up to 170 reqs/sec, but it never gets over it. No matter how many more worker threads I start, the load on the server is never more than 20% (and the client's load also doesn't increase any more). How can I overcome this? I've googled a bit and found out that after a request is completed, a socket associated with one ephermal port remains in WAIT_TIME state for some time during which it can't be reused. I tried to overcome this by doing these things: sysctl -w net.ipv4.ip_local_port_range="1024 65535" echo 1 > /proc/sys/net/ipv4/tcp_tw_recycle Oh, and the client machine is a Linux (RedHat, I think, but I'm not sure). Any help would be appreciated.

  Read the article

• Router as primary DNS server, Server as alternate? (or vice versa)

  - by Jakobud

  We have a very small business network, with a typical cable modem hooked into a DD-WRT router. We also run a basic CentOS server that does a variety of things, including acting as the primary DNS server for the office. The reason we need an internal DNS server is because we do a lot of internal web development and use the DNS server to add/remove various local network URLs for internal website testing (like www.testsite.com.local). It's very important for us to be able to add/remove URL aliases easily to the DNS. The problem with this setup is that if we ever need to restart the CentOS server or take it offline for upgrades or whatever, then internet access for all computers on the network is lost. That's because each computer relies on that DNS server to access the Internet I guess? The router is online all the time and very very rarely has to be restarted. It would be nice if we could setup my router to be the primary DNS server but still be running DNS on my server. So we could still add my local testing website URLs to the DNS server in CentOS, but be able to also take down the CentOS server without loosing Internet access on the network. How would this be setup? Would I simply need to add both router + server IP addresses to each computer's IP settings? Is the router primary DNS and server secondary DNS server? Or vice versa? Or can one of the two serve as a fallback for the other? What (if anything) needs to be configured on both the router and server in order for them to recognize that the other DNS server exists on the network? Does anyone have any newb-friendly resources for setting up something like this?

  Read the article

• Multiple SSL certificates on Apache using multiple public IPs - not working

  - by St. Even

  I need configure multiple SSL certificates on a single Apache server. I already know that I need multiple external IP addresses as I cannot use SNI (only running Apache 2.2.3 on this server). I assumed that I had everything configured correctly, unfortunately things are not working as they should (or maybe I should say, as I expected them to work)... In my httpd.conf I have: NameVirtualHost *:80 NameVirtualHost *:443 Lets say my public IP is 12.0.0.1 and my private IP is 192.168.0.1. When I use the public IP in my vhost my default website is being shown instead the one defined in my vhost, e.g.: <VirtualHost 12.0.0.1:443> ServerAdmin [email protected] ServerName blablabla.site.com DocumentRoot /data/sites/blablabla.site.com ErrorLog /data/sites/blablabla.site.com-error.log #CustomLog /data/sites/blablabla.site.com-access.log common SSLEngine On SSLCertificateFile /etc/httpd/conf/ssl/blablabla.site.com.crt SSLCertificateKeyFile /etc/httpd/conf/ssl/blablabla.site.com.key SSLCertificateChainFile /etc/httpd/conf/ssl/blablabla.site.com.ca-bundle <Location /> SSLRequireSSL On SSLVerifyDepth 1 SSLOptions +StdEnvVars +StrictRequire </Location> </VirtualHost> When I use the private IP in my vhost everything works as it should (the website defined in my vhost is being shown), e.g.: <VirtualHost 192.168.0.1:443> ...same as above... </VirtualHost> My server is listening on all interfaces: [root@grbictwebp02 httpd]# netstat -tulpn | grep :443 tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 5585/httpd What am I doing wrong? If I cannot get this to work I cannot continue to add the second SSL certificate on the other public IP... If more information is required just let me know!

  Read the article

• Need to set up a proxy on Linksys E3200 to filter home internet

  - by Justin Amberson

  the fact that I have a Linksys E3200 may not be important. I can configure the router through the web interface, but I don't know the things I will be toggling are called. I already do simple port forwarding to access applications on my Mac remotely. So router admin is not something I technically need explained. I'm looking to running a proxy on my home computer, that filters all HTTP traffic that goes through my router. So if my daughter is on her iPad and accesses Safari, my Mac will be the judge of the validity of the request. I need something like NetNanny I guess, but local. Actually, anything that can just filter all port 80 traffic that runs locally, but maybe validates with a password? I truly truly hope this question falls within the bounds of Serverfault. I'm not a total internet newb but I'm at a loss for what to Google. If possible answer this question: Is there a webapp that can listen on port 80, and validate requests to port 80 with a password? If so, can I forward all traffic on port 80 to my Mac, to be re-routed to the user? Is this the same as a VPN? Thank you for your help. Justin

  Read the article

• Trouble with Remote Desktop pulling through printers. Drive Redirection works, and the ports created but not the printers

  - by Windex

  I've run out of things to look into. All the support documents have been gone through and still provide no resolution. I've checked the service permissions, (sc sdshow spooler) they all match up with other systems and what is output on the support documents. I'm nearly positive that the issue can't be permissions anyway as the software requires all users to be an administrator, so all users are a local administrator. (I haven't looked into why yet but its on the list, I was just recently brought into this team and we've put procedures in place for quick recovery.) We've applied hot fixes relating to RDS and printing, though I'm not sure which ones they were. I've combed through group policy and no where is printer redirection disabled. It's setup with all default values regarding the use and redirection of printers and a quick install of W2k8 R2 shows that it works by default. This dev install was joined to the same domain, placed in the same OU, shows the same policies applied, etc, etc, etc, The server generates all the correct redirected ports but no printers are created. It will also redirect drives without issue, this would seem to rule out the usermode service that handles redirects being broken. No events are logged related to any of the events and there are no events from the TerminalServices-Printer source. There were local printers setup. I didn't think it would mattter but as I was running out of ideas I tried deleting them all with no change. The TS was configured for the software it will be running before we checked out the redirection of printers so the other team responsible to setting up new servers wants to find a fix instead of reloading a new server. I'm not sure where or what else to look for. Any ideas?

  Read the article

• Problem with Amiga 1200 accelerator board

  - by cc0

  I just recently walked past a dump, where in the corner of my eye I spotted something that looked like a huge keyboard. I went to take a closer look, and found out that it was an Amiga 1200 with a 030 accellerator board and scala dongle. Jackpot! So anyway; I dried it, cleaned it, it works, but the floppy was not powering on and same with the harddrive. I am using an old Amiga 1200 PSU that was making some strange high pitch noise when I tried to boot the amiga with the harddrive installed in it. I removed the harddrive and it booted fine with the PSU not emitting any detectable noise. However, when I have the 030 installed it sometimes reboots and shows a red "Software Error" screen. I tried removing the memory on the board, same effect. Sometimes it does not boot at all, just gives a black screen. Someone suggested the card had problems with 3.1 roms, but this amiga has only 3.0 roms installed. Does anyone have any apparent theories as to why it seems unstable? I don't have any other Amiga parts to cross-swap with to test a lot of things, so I'd really appreciate some sound input here so I'd know what to look for in order to try fix it. And merry Christmas everyone :]

  Read the article

< Previous Page | 616 617 618 619 620 621 622 623 624 625 626 627  | Next Page >