inversion of control - Page 623

On configuring GC 10.2.0.5 to monitor LISTENER SCAN using UDMs ...

- by [email protected]

Hi,Looks like Grid Control 10.2.0.5 is not fully prepared for monitoringthe Grid Infrastructure (11gR2).Even I'm pretty sure the upcoming version of GC (11g) will of course support all the new features of 11gR2, some customersare asking for some "hand-made" procedures for monitoring all the new stuff.I think one of the most critical components that cant be monitored are the LISTENER SCAN, so I have developed a little script for doing sousing the GC User Defined Metrics ( at host level )I am more than happy to share with you:#!/bin/ksh ### NAME### monitor_scan.sh###### DESCRIPTION### SCAN Listener monitoring###### RETURNS###### NOTES###### MODIFIED (DD/MM/YY)### Oracle 25/03/10 - Creation###export ORACLE_HOME=/opt/oracle/soft/11.2/gridRSC_KEY=$1AWK=/sbin/awk LISTENER_DOWN_COUNT=$(${ORACLE_HOME}/bin/crsctl status resource -w 'TYPE = ora.scan_listener.type' | grep OFFLINE | wc -l)if [ ${LISTENER_DOWN_COUNT} != 0 ]; then SCAN_DOWN_LIST=$(${ORACLE_HOME}/bin/crsctl status resource -w 'TYPE = ora.scan_listener.type' | $AWK \ 'BEGIN { FS="="; state = 0; } $1~/NAME/ && $2~/'$RSC_KEY'/ {appname = $2; state=1}; state == 0 {next;} $1~/TARGET/ && state == 1 {apptarget = $2; state=2;} $1~/STATE/ && state == 2 {appstate = $2; state=3;} state == 3 {printf "%-45s %-10s %-18s\n", appname, apptarget, appstate; state=0;}' | grep OFFLINE | awk '{ print $1 }') echo em_result=ALERT echo em_message=There are LISTENER SCAN with down status: [${SCAN_DOWN_LIST}]else echo em_result=NORMAL echo em_message=All SCAN Listener are UPfiHope it helpsL

Read the article

OWB 11gR2 – Flexible and extensible

- by David Allan

The Oracle data integration extensibility capabilities are something I love, nothing more frustrating than a tool or platform that is very constraining. I think extensibility and flexibility are invaluable capabilities in the data integration arena. I liked Uli Bethke's posting on some extensibility capabilities with ODI (see Nesting ODI Substitution Method Calls here), he has some useful guidance on making customizations to existing KMs, nice to learn by example. I thought I'd illustrate the same capabilities with ODI's partner OWB for the OWB community. There is a whole new world of potential. The LKM/IKM/CKM/JKMs are the primary templates that are supported (plus the Oracle Target code template), so there is a lot of potential for customizing and extending the product in this release. Enough waffle... Diving in at the deep end from Uli's post, in OWB the table operator has a number of additional properties in OWB 11gR2 that let you annotate the column usage with ODI-like properties such as the slowly changing usage or for your own user-defined purpose as in Uli's post, below you see for the target table SALES_TARGET we can use the UD5 property which when assigned the code template (knowledge module) which has been modified with Uli's change we can do custom things such as creating indices - provides The code template used by the mapping has the additional step which is basically the code illustrated from Uli's posting just used directly, the ODI 10g substitution references also supported from within OWB's runtime. Now to see whether this does what we expect before we execute it, we can check out the generated code similar to how the traditional mapping generation and preview works, you do this by clicking on the 'Inspect Code' button on the execution units code template assignment. This then creates another tab with prefix 'Code - <mapping name>' where the generated code is put, scrolling down we find the last step with the indices being created, looks good, so we are ready to deploy and execute. After executing the mapping we can then use the 'Audit Information' panel (select the mapping in the designer tree and click on View/Audit Information), this gives us a view of the execution where we can drill into the tasks that were executed and inspect both the template and the generated code that was executed and any potential errors. Reflecting back on earlier versions of OWB, these were the kinds of features that were always highly desirable, getting under the hood of the code generation and tweaking bit and pieces - fun and powerful stuff! We can step it up a bit here and explore some further ideas. The example below is a daisy-chained set of execution units where the intermediate table is a target of one unit and the source for another. We want that table to be a global temporary table, so can tweak the templates. Back to the copy of SQL Control Append (for demo purposes) we modify the create target table step to make the table a global temporary table, with the option of on commit preserve rows. You can get a feel for some of the customizations and changes possible, providing some great flexibility and extensibility for the data integration tools.

Read the article

Ancillary Objects: Separate Debug ELF Files For Solaris

- by Ali Bahrami

We introduced a new object ELF object type in Solaris 11 Update 1 called the Ancillary Object. This posting describes them, using material originally written during their development, the PSARC arc case, and the Solaris Linker and Libraries Manual. ELF objects contain allocable sections, which are mapped into memory at runtime, and non-allocable sections, which are present in the file for use by debuggers and observability tools, but which are not mapped or used at runtime. Typically, all of these sections exist within a single object file. Ancillary objects allow them to instead go into a separate file. There are different reasons given for wanting such a feature. One can debate whether the added complexity is worth the benefit, and in most cases it is not. However, one important case stands out — customers with very large 32-bit objects who are not ready or able to make the transition to 64-bits. We have customers who build extremely large 32-bit objects. Historically, the debug sections in these objects have used the stabs format, which is limited, but relatively compact. In recent years, the industry has transitioned to the powerful but verbose DWARF standard. In some cases, the size of these debug sections is large enough to push the total object file size past the fundamental 4GB limit for 32-bit ELF object files. The best, and ultimately only, solution to overly large objects is to transition to 64-bits. However, consider environments where: Hundreds of users may be executing the code on large shared systems. (32-bits use less memory and bus bandwidth, and on sparc runs just as fast as 64-bit code otherwise). Complex finely tuned code, where the original authors may no longer be available. Critical production code, that was expensive to qualify and bring online, and which is otherwise serving its intended purpose without issue. Users in these risk adverse and/or high scale categories have good reasons to push 32-bits objects to the limit before moving on. Ancillary objects offer these users a longer runway. Design The design of ancillary objects is intended to be simple, both to help human understanding when examining elfdump output, and to lower the bar for debuggers such as dbx to support them. The primary and ancillary objects have the same set of section headers, with the same names, in the same order (i.e. each section has the same index in both files). A single added section of type SHT_SUNW_ANCILLARY is added to both objects, containing information that allows a debugger to identify and validate both files relative to each other. Given one of these files, the ancillary section allows you to identify the other. Allocable sections go in the primary object, and non-allocable ones go into the ancillary object. A small set of non-allocable objects, notably the symbol table, are copied into both objects. As noted above, most sections are only written to one of the two objects, but both objects have the same section header array. The section header in the file that does not contain the section data is tagged with the SHF_SUNW_ABSENT section header flag to indicate its placeholder status. Compiler writers and others who produce objects can set the SUNW_SHF_PRIMARY section header flag to mark non-allocable sections that should go to the primary object rather than the ancillary. If you don't request an ancillary object, the Solaris ELF format is unchanged. Users who don't use ancillary objects do not pay for the feature. This is important, because they exist to serve a small subset of our users, and must not complicate the common case. If you do request an ancillary object, the runtime behavior of the primary object will be the same as that of a normal object. There is no added runtime cost. The primary and ancillary object together represent a logical single object. This is facilitated by the use of a single set of section headers. One can easily imagine a tool that can merge a primary and ancillary object into a single file, or the reverse. (Note that although this is an interesting intellectual exercise, we don't actually supply such a tool because there's little practical benefit above and beyond using ld to create the files). Among the benefits of this approach are: There is no need for per-file symbol tables to reflect the contents of each file. The same symbol table that would be produced for a standard object can be used. The section contents are identical in either case — there is no need to alter data to accommodate multiple files. It is very easy for a debugger to adapt to these new files, and the processing involved can be encapsulated in input/output routines. Most of the existing debugger implementation applies without modification. The limit of a 4GB 32-bit output object is now raised to 4GB of code, and 4GB of debug data. There is also the future possibility (not currently supported) to support multiple ancillary objects, each of which could contain up to 4GB of additional debug data. It must be noted however that the 32-bit DWARF debug format is itself inherently 32-bit limited, as it uses 32-bit offsets between debug sections, so the ability to employ multiple ancillary object files may not turn out to be useful. Using Ancillary Objects (From the Solaris Linker and Libraries Guide) By default, objects contain both allocable and non-allocable sections. Allocable sections are the sections that contain executable code and the data needed by that code at runtime. Non-allocable sections contain supplemental information that is not required to execute an object at runtime. These sections support the operation of debuggers and other observability tools. The non-allocable sections in an object are not loaded into memory at runtime by the operating system, and so, they have no impact on memory use or other aspects of runtime performance no matter their size. For convenience, both allocable and non-allocable sections are normally maintained in the same file. However, there are situations in which it can be useful to separate these sections. To reduce the size of objects in order to improve the speed at which they can be copied across wide area networks. To support fine grained debugging of highly optimized code requires considerable debug data. In modern systems, the debugging data can easily be larger than the code it describes. The size of a 32-bit object is limited to 4 Gbytes. In very large 32-bit objects, the debug data can cause this limit to be exceeded and prevent the creation of the object. To limit the exposure of internal implementation details. Traditionally, objects have been stripped of non-allocable sections in order to address these issues. Stripping is effective, but destroys data that might be needed later. The Solaris link-editor can instead write non-allocable sections to an ancillary object. This feature is enabled with the -z ancillary command line option. $ ld ... -z ancillary[=outfile] ...By default, the ancillary file is given the same name as the primary output object, with a .anc file extension. However, a different name can be provided by providing an outfile value to the -z ancillary option. When -z ancillary is specified, the link-editor performs the following actions. All allocable sections are written to the primary object. In addition, all non-allocable sections containing one or more input sections that have the SHF_SUNW_PRIMARY section header flag set are written to the primary object. All remaining non-allocable sections are written to the ancillary object. The following non-allocable sections are written to both the primary object and ancillary object. .shstrtab The section name string table. .symtab The full non-dynamic symbol table. .symtab_shndx The symbol table extended index section associated with .symtab. .strtab The non-dynamic string table associated with .symtab. .SUNW_ancillary Contains the information required to identify the primary and ancillary objects, and to identify the object being examined. The primary object and all ancillary objects contain the same array of sections headers. Each section has the same section index in every file. Although the primary and ancillary objects all define the same section headers, the data for most sections will be written to a single file as described above. If the data for a section is not present in a given file, the SHF_SUNW_ABSENT section header flag is set, and the sh_size field is 0. This organization makes it possible to acquire a full list of section headers, a complete symbol table, and a complete list of the primary and ancillary objects from either of the primary or ancillary objects. The following example illustrates the underlying implementation of ancillary objects. An ancillary object is created by adding the -z ancillary command line option to an otherwise normal compilation. The file utility shows that the result is an executable named a.out, and an associated ancillary object named a.out.anc. $ cat hello.c #include <stdio.h> int main(int argc, char **argv) { (void) printf("hello, world\n"); return (0); } $ cc -g -zancillary hello.c $ file a.out a.out.anc a.out: ELF 32-bit LSB executable 80386 Version 1 [FPU], dynamically linked, not stripped, ancillary object a.out.anc a.out.anc: ELF 32-bit LSB ancillary 80386 Version 1, primary object a.out $ ./a.out hello worldThe resulting primary object is an ordinary executable that can be executed in the usual manner. It is no different at runtime than an executable built without the use of ancillary objects, and then stripped of non-allocable content using the strip or mcs commands. As previously described, the primary object and ancillary objects contain the same section headers. To see how this works, it is helpful to use the elfdump utility to display these section headers and compare them. The following table shows the section header information for a selection of headers from the previous link-edit example. Index Section Name Type Primary Flags Ancillary Flags Primary Size Ancillary Size 13 .text PROGBITS ALLOC EXECINSTR ALLOC EXECINSTR SUNW_ABSENT 0x131 0 20 .data PROGBITS WRITE ALLOC WRITE ALLOC SUNW_ABSENT 0x4c 0 21 .symtab SYMTAB 0 0 0x450 0x450 22 .strtab STRTAB STRINGS STRINGS 0x1ad 0x1ad 24 .debug_info PROGBITS SUNW_ABSENT 0 0 0x1a7 28 .shstrtab STRTAB STRINGS STRINGS 0x118 0x118 29 .SUNW_ancillary SUNW_ancillary 0 0 0x30 0x30 The data for most sections is only present in one of the two files, and absent from the other file. The SHF_SUNW_ABSENT section header flag is set when the data is absent. The data for allocable sections needed at runtime are found in the primary object. The data for non-allocable sections used for debugging but not needed at runtime are placed in the ancillary file. A small set of non-allocable sections are fully present in both files. These are the .SUNW_ancillary section used to relate the primary and ancillary objects together, the section name string table .shstrtab, as well as the symbol table.symtab, and its associated string table .strtab. It is possible to strip the symbol table from the primary object. A debugger that encounters an object without a symbol table can use the .SUNW_ancillary section to locate the ancillary object, and access the symbol contained within. The primary object, and all associated ancillary objects, contain a .SUNW_ancillary section that allows all the objects to be identified and related together. $ elfdump -T SUNW_ancillary a.out a.out.anc a.out: Ancillary Section: .SUNW_ancillary index tag value [0] ANC_SUNW_CHECKSUM 0x8724 [1] ANC_SUNW_MEMBER 0x1 a.out [2] ANC_SUNW_CHECKSUM 0x8724 [3] ANC_SUNW_MEMBER 0x1a3 a.out.anc [4] ANC_SUNW_CHECKSUM 0xfbe2 [5] ANC_SUNW_NULL 0 a.out.anc: Ancillary Section: .SUNW_ancillary index tag value [0] ANC_SUNW_CHECKSUM 0xfbe2 [1] ANC_SUNW_MEMBER 0x1 a.out [2] ANC_SUNW_CHECKSUM 0x8724 [3] ANC_SUNW_MEMBER 0x1a3 a.out.anc [4] ANC_SUNW_CHECKSUM 0xfbe2 [5] ANC_SUNW_NULL 0 The ancillary sections for both objects contain the same number of elements, and are identical except for the first element. Each object, starting with the primary object, is introduced with a MEMBER element that gives the file name, followed by a CHECKSUM that identifies the object. In this example, the primary object is a.out, and has a checksum of 0x8724. The ancillary object is a.out.anc, and has a checksum of 0xfbe2. The first element in a .SUNW_ancillary section, preceding the MEMBER element for the primary object, is always a CHECKSUM element, containing the checksum for the file being examined. The presence of a .SUNW_ancillary section in an object indicates that the object has associated ancillary objects. The names of the primary and all associated ancillary objects can be obtained from the ancillary section from any one of the files. It is possible to determine which file is being examined from the larger set of files by comparing the first checksum value to the checksum of each member that follows. Debugger Access and Use of Ancillary Objects Debuggers and other observability tools must merge the information found in the primary and ancillary object files in order to build a complete view of the object. This is equivalent to processing the information from a single file. This merging is simplified by the primary object and ancillary objects containing the same section headers, and a single symbol table. The following steps can be used by a debugger to assemble the information contained in these files. Starting with the primary object, or any of the ancillary objects, locate the .SUNW_ancillary section. The presence of this section identifies the object as part of an ancillary group, contains information that can be used to obtain a complete list of the files and determine which of those files is the one currently being examined. Create a section header array in memory, using the section header array from the object being examined as an initial template. Open and read each file identified by the .SUNW_ancillary section in turn. For each file, fill in the in-memory section header array with the information for each section that does not have the SHF_SUNW_ABSENT flag set. The result will be a complete in-memory copy of the section headers with pointers to the data for all sections. Once this information has been acquired, the debugger can proceed as it would in the single file case, to access and control the running program. Note - The ELF definition of ancillary objects provides for a single primary object, and an arbitrary number of ancillary objects. At this time, the Oracle Solaris link-editor only produces a single ancillary object containing all non-allocable sections. This may change in the future. Debuggers and other observability tools should be written to handle the general case of multiple ancillary objects. ELF Implementation Details (From the Solaris Linker and Libraries Guide) To implement ancillary objects, it was necessary to extend the ELF format to add a new object type (ET_SUNW_ANCILLARY), a new section type (SHT_SUNW_ANCILLARY), and 2 new section header flags (SHF_SUNW_ABSENT, SHF_SUNW_PRIMARY). In this section, I will detail these changes, in the form of diffs to the Solaris Linker and Libraries manual. Part IV ELF Application Binary Interface Chapter 13: Object File Format Object File Format Edit Note: This existing section at the beginning of the chapter describes the ELF header. There's a table of object file types, which now includes the new ET_SUNW_ANCILLARY type. e_type Identifies the object file type, as listed in the following table. NameValueMeaning ET_NONE0No file type ET_REL1Relocatable file ET_EXEC2Executable file ET_DYN3Shared object file ET_CORE4Core file ET_LOSUNW0xfefeStart operating system specific range ET_SUNW_ANCILLARY0xfefeAncillary object file ET_HISUNW0xfefdEnd operating system specific range ET_LOPROC0xff00Start processor-specific range ET_HIPROC0xffffEnd processor-specific range Sections Edit Note: This overview section defines the section header structure, and provides a high level description of known sections. It was updated to define the new SHF_SUNW_ABSENT and SHF_SUNW_PRIMARY flags and the new SHT_SUNW_ANCILLARY section. ... sh_type Categorizes the section's contents and semantics. Section types and their descriptions are listed in Table 13-5. sh_flags Sections support 1-bit flags that describe miscellaneous attributes. Flag definitions are listed in Table 13-8. ... Table 13-5 ELF Section Types, sh_type NameValue . . . SHT_LOSUNW0x6fffffee SHT_SUNW_ancillary0x6fffffee . . . ... SHT_LOSUNW - SHT_HISUNW Values in this inclusive range are reserved for Oracle Solaris OS semantics. SHT_SUNW_ANCILLARY Present when a given object is part of a group of ancillary objects. Contains information required to identify all the files that make up the group. See Ancillary Section. ... Table 13-8 ELF Section Attribute Flags NameValue . . . SHF_MASKOS0x0ff00000 SHF_SUNW_NODISCARD0x00100000 SHF_SUNW_ABSENT0x00200000 SHF_SUNW_PRIMARY0x00400000 SHF_MASKPROC0xf0000000 . . . ... SHF_SUNW_ABSENT Indicates that the data for this section is not present in this file. When ancillary objects are created, the primary object and any ancillary objects, will all have the same section header array, to facilitate merging them to form a complete view of the object, and to allow them to use the same symbol tables. Each file contains a subset of the section data. The data for allocable sections is written to the primary object while the data for non-allocable sections is written to an ancillary file. The SHF_SUNW_ABSENT flag is used to indicate that the data for the section is not present in the object being examined. When the SHF_SUNW_ABSENT flag is set, the sh_size field of the section header must be 0. An application encountering an SHF_SUNW_ABSENT section can choose to ignore the section, or to search for the section data within one of the related ancillary files. SHF_SUNW_PRIMARY The default behavior when ancillary objects are created is to write all allocable sections to the primary object and all non-allocable sections to the ancillary objects. The SHF_SUNW_PRIMARY flag overrides this behavior. Any output section containing one more input section with the SHF_SUNW_PRIMARY flag set is written to the primary object without regard for its allocable status. ... Two members in the section header, sh_link, and sh_info, hold special information, depending on section type. Table 13-9 ELF sh_link and sh_info Interpretation sh_typesh_linksh_info . . . SHT_SUNW_ANCILLARY The section header index of the associated string table. 0 . . . Special Sections Edit Note: This section describes the sections used in Solaris ELF objects, using the types defined in the previous description of section types. It was updated to define the new .SUNW_ancillary (SHT_SUNW_ANCILLARY) section. Various sections hold program and control information. Sections in the following table are used by the system and have the indicated types and attributes. Table 13-10 ELF Special Sections NameTypeAttribute . . . .SUNW_ancillarySHT_SUNW_ancillaryNone . . . ... .SUNW_ancillary Present when a given object is part of a group of ancillary objects. Contains information required to identify all the files that make up the group. See Ancillary Section for details. ... Ancillary Section Edit Note: This new section provides the format reference describing the layout of a .SUNW_ancillary section and the meaning of the various tags. Note that these sections use the same tag/value concept used for dynamic and capabilities sections, and will be familiar to anyone used to working with ELF. In addition to the primary output object, the Solaris link-editor can produce one or more ancillary objects. Ancillary objects contain non-allocable sections that would normally be written to the primary object. When ancillary objects are produced, the primary object and all of the associated ancillary objects contain a SHT_SUNW_ancillary section, containing information that identifies these related objects. Given any one object from such a group, the ancillary section provides the information needed to identify and interpret the others. This section contains an array of the following structures. See sys/elf.h. typedef struct { Elf32_Word a_tag; union { Elf32_Word a_val; Elf32_Addr a_ptr; } a_un; } Elf32_Ancillary; typedef struct { Elf64_Xword a_tag; union { Elf64_Xword a_val; Elf64_Addr a_ptr; } a_un; } Elf64_Ancillary; For each object with this type, a_tag controls the interpretation of a_un. a_val These objects represent integer values with various interpretations. a_ptr These objects represent file offsets or addresses. The following ancillary tags exist. Table 13-NEW1 ELF Ancillary Array Tags NameValuea_un ANC_SUNW_NULL0Ignored ANC_SUNW_CHECKSUM1a_val ANC_SUNW_MEMBER2a_ptr ANC_SUNW_NULL Marks the end of the ancillary section. ANC_SUNW_CHECKSUM Provides the checksum for a file in the c_val element. When ANC_SUNW_CHECKSUM precedes the first instance of ANC_SUNW_MEMBER, it provides the checksum for the object from which the ancillary section is being read. When it follows an ANC_SUNW_MEMBER tag, it provides the checksum for that member. ANC_SUNW_MEMBER Specifies an object name. The a_ptr element contains the string table offset of a null-terminated string, that provides the file name. An ancillary section must always contain an ANC_SUNW_CHECKSUM before the first instance of ANC_SUNW_MEMBER, identifying the current object. Following that, there should be an ANC_SUNW_MEMBER for each object that makes up the complete set of objects. Each ANC_SUNW_MEMBER should be followed by an ANC_SUNW_CHECKSUM for that object. A typical ancillary section will therefore be structured as: TagMeaning ANC_SUNW_CHECKSUMChecksum of this object ANC_SUNW_MEMBERName of object #1 ANC_SUNW_CHECKSUMChecksum for object #1 . . . ANC_SUNW_MEMBERName of object N ANC_SUNW_CHECKSUMChecksum for object N ANC_SUNW_NULL An object can therefore identify itself by comparing the initial ANC_SUNW_CHECKSUM to each of the ones that follow, until it finds a match. Related Other Work The GNU developers have also encountered the need/desire to support separate debug information files, and use the solution detailed at http://sourceware.org/gdb/onlinedocs/gdb/Separate-Debug-Files.html. At the current time, the separate debug file is constructed by building the standard object first, and then copying the debug data out of it in a separate post processing step, Hence, it is limited to a total of 4GB of code and debug data, just as a single object file would be. They are aware of this, and I have seen online comments indicating that they may add direct support for generating these separate files to their link-editor. It is worth noting that the GNU objcopy utility is available on Solaris, and that the Studio dbx debugger is able to use these GNU style separate debug files even on Solaris. Although this is interesting in terms giving Linux users a familiar environment on Solaris, the 4GB limit means it is not an answer to the problem of very large 32-bit objects. We have also encountered issues with objcopy not understanding Solaris-specific ELF sections, when using this approach. The GNU community also has a current effort to adapt their DWARF debug sections in order to move them to separate files before passing the relocatable objects to the linker. The details of Project Fission can be found at http://gcc.gnu.org/wiki/DebugFission. The goal of this project appears to be to reduce the amount of data seen by the link-editor. The primary effort revolves around moving DWARF data to separate .dwo files so that the link-editor never encounters them. The details of modifying the DWARF data to be usable in this form are involved — please see the above URL for details.

Read the article

Claims-based Identity Terminology

- by kaleidoscope

There are several terms commonly used to describe claims-based identity, and it is important to clearly define these terms. · Identity In terms of Access Control, the term identity will be used to refer to a set of claims made by a trusted issuer about the user. · Claim You can think of a claim as a bit of identity information, such as name, email address, age, and so on. The more claims your service receives, the more you’ll know about the user who is making the request. · Security Token The user delivers a set of claims to your service piggybacked along with his or her request. In a REST Web service, these claims are carried in the Authorization header of the HTTP(S) request. Regardless of how they arrive, claims must somehow be serialized, and this is managed by security tokens. A security token is a serialized set of claims that is signed by the issuing authority. · Issuing Authority & Identity Provider An issuing authority has two main features. The first and most obvious is that it issues security tokens. The second feature is the logic that determines which claims to issue. This is based on the user’s identity, the resource to which the request applies, and possibly other contextual data such as time of day. This type of logic is often referred to as policy[1]. There are many issuing authorities, including Windows Live ID, ADFS, PingFederate from Ping Identity (a product that exposes user identities from the Java world), Facebook Connect, and more. Their job is to validate some credential from the user and issue a token with an identifier for the user's account and possibly other identity attributes. These types of authorities are called identity providers (sometimes shortened as IdP). It’s ultimately their responsibility to answer the question, “who are you?” and ensure that the user knows his or her password, is in possession of a smart card, knows the PIN code, has a matching retinal scan, and so on. · Security Token Service (STS) A security token service (STS) is a technical term for the Web interface in an issuing authority that allows clients to request and receive a security token according to interoperable protocols that are discussed in the following section. This term comes from the WS-Trust standard, and is often used in the literature to refer to an issuing authority. STS when used from developer point of view indicates the URL to use to request a token from an issuer. For more details please refer to the link http://www.microsoft.com/windowsazure/developers/dotnetservices/ Geeta, G

Read the article

Four Emerging Payment Stories

- by David Dorf

The world of alternate payments has been moving fast of late. Innovation in this area will help both consumers and retailers, but probably hurt the banks (at least that's the plan). Here are four recent news items in this area: Dwolla, a start-up in Iowa, is trying to make credit cards obsolete. Twelve guys in Des Moines are using $1.3M they raised to allow businesses to skip the credit card networks and avoid the fees. Today they move about $1M a day across their network with an average transaction size of $500. Instead of charging merchants 2.9% plus $.30 per transaction, Dwolla charges a quarter -- yep, that coin featuring George Washington. Dwolla (Web + Dollar = Dwolla) avoids the credit networks and connects directly to bank accounts using the bank's ACH network. They are signing up banks and merchants targeting both B2B and C2B as well as P2P payments. They leverage social networks to notify people they have a money transfer, and also have a mobile app that uses GPS location. However, all is not rosy. There have been complaints about unexpected chargebacks and with debit fees being reduced by the big banks, the need is not as pronounced. The big banks are working on their own network called clearXchange that could provide stiff competition. VeriFone just bought European payment processor Point for around $1B. By itself this would not have caught my attention except for the fact that VeriFone also announced the acquisition of GlobalBay earlier this month. In addition to their core business of selling stand-beside payment terminals, with GlobalBay they get employee-operated mobile selling tools and with Point they get a very big payment processing platform. MasterCard and Intel announced a partnership around payments, starting with PayPass, MasterCard's new payment technology. Intel will lend its expertise to add additional levels of security, which seems to be the biggest barrier for consumer adoption. Everyone is scrambling to get their piece of cash transactions, which still represents 85% of all transactions. Apple was awarded another mobile payment patent further cementing the rumors that the iPhone 5 will support NFC payments. As usual, Apple is upsetting the apple cart (sorry) by moving control of key data from the carriers to Apple. With Apple's vast number of iTunes accounts, they have a ready-made customer base to use the payment infrastructure, which I bet will slowly transition people away from credit cards and toward cheaper ACH. Gary Schwartz explains the three step process Apple is taking to become a payment processor. Below is a picture I drew representing payments in the retail industry. There's certainly a lot of innovation happening.

Read the article

Limiting DOPs – Who rules over whom?

- by jean-pierre.dijcks

I've gotten a couple of questions from Dan Morgan and figured I start to answer them in this way. While Dan is running on a big system he is running with Database Resource Manager and he is trying to make sure the system doesn't go crazy (remember end user are never, ever crazy!) on very high DOPs. Q: How do I control statements with very high DOPs driven from user hints in queries? A: The best way to do this is to work with DBRM and impose limits on consumer groups. The Max DOP setting you can set in DBRM allows you to overwrite the hint. Now let's go into some more detail here. Assume my object (and for simplicity we assume there is a single object - and do remember that we always pick the highest DOP when in doubt and when conflicting DOPs are available in a query) has PARALLEL 64 as its setting. Assume that the query that selects something cool from that table lives in a consumer group with a max DOP of 32. Assume no goofy things (like running out of parallel_max_servers) are happening. A query selecting from this table will run at DOP 32 because DBRM caps the DOP. As of 11.2.0.1 we also use the DBRM cap to create the original plan (at compile time) and not just enforce the cap at runtime. Now, my user is smart and writes a query with a parallel hint requesting DOP 128. This query is still capped by DBRM and DBRM overrules the hint in the statement. The statement, despite the hint, runs at DOP 32. Note that in the hinted scenario we do compile the statement with DOP 128 (the optimizer obeys the hint). This is another reason to use table decoration rather than hints. Q: What happens if I set parallel_max_servers higher than processes (e.g. the max number of processes allowed to run on my machine)? A: Processes rules. It is important to understand that processes are fixed at startup time. If you increase parallel_max_servers above the number of processes in the processes parameter you should get a warning in the alert log stating it can not take effect. As a follow up, a hinted query requesting more parallel processes than either parallel_max_servers or processes will not be able to acquire the requested number. Parallel_max_processes will prevent this. And since parallel_max_servers should be lower than max processes you can never go over either...

Read the article

Using Rich Text Editor (WYSIWYG) in ASP.NET MVC

- by imran_ku07

Introduction: In ASP.NET MVC forum I found some question regarding a sample HTML Rich Text Box Editor(also known as wysiwyg).So i decided to create a sample ASP.NET MVC web application which will use a Rich Text Box Editor. There are are lot of Html Editors are available, but for creating a sample application, i decided to use cross-browser WYSIWYG editor from openwebware. In this article I will discuss what changes needed to work this editor with ASP.NET MVC. Also I had attached the sample application for download at http://www.speedfile.org/155076. Also note that I will only show the important features, not discuss every feature in detail. Description: So Let's start create a sample ASP.NET MVC application. You need to add the following script files, jquery-1.3.2.min.js jquery_form.js wysiwyg.js wysiwyg-settings.js wysiwyg-popup.js Just put these files inside Scripts folder. Also put wysiwyg.css in your Content Folder and add the following folders in your project addons popups Also create a empty folder Uploads to store the uploaded images. Next open wysiwyg.js and set your configuration // Images Directory this.ImagesDir = "/addons/imagelibrary/images/"; // Popups Directory this.PopupsDir = "/popups/"; // CSS Directory File this.CSSFile = "/Content/wysiwyg.css"; Next create a simple View TextEditor.aspx inside View / Home Folder and add the folllowing HTML. <%@ Page Language="C#" Inherits="System.Web.Mvc.ViewPage" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html > <head runat="server"> <title>TextEditor</title> <script src="../../Scripts/wysiwyg.js" type="text/javascript"></script> <script src="../../Scripts/wysiwyg-settings.js" type="text/javascript"></script> <script type="text/javascript"> WYSIWYG.attach('text', full); </script> </head> <body> <% using (Html.BeginForm()){ %> <textarea id="text" name="test2" style="width:850px;height:200px;"> </textarea> <input type="submit" value="submit" /> <%} %> </body> </html> Here i have just added a text area control and a submit button inside a form. Note the id of text area and WYSIWYG.attach function's first parameter is same and next to watch is the HomeController.cs using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.Mvc; using System.IO; namespace HtmlTextEditor.Controllers { [HandleError] public class HomeController : Controller { public ActionResult Index() { ViewData["Message"] = "Welcome to ASP.NET MVC!"; return View(); } public ActionResult About() { return View(); } public ActionResult TextEditor() { return View(); } [AcceptVerbs(HttpVerbs.Post)] [ValidateInput(false)] public ActionResult TextEditor(string test2) { Session["html"] = test2; return RedirectToAction("Index"); } public ActionResult UploadImage() { if (Request.Files[0].FileName != "") { Request.Files[0].SaveAs(Server.MapPath("~/Uploads/" + Path.GetFileName(Request.Files[0].FileName))); return Content(Url.Content("~/Uploads/" + Path.GetFileName(Request.Files[0].FileName))); } return Content("a"); } } } So simple code, just save the posted Html into Session. Here the parameter of TextArea action is test2 which is same as textarea control name of TextArea.aspx View. Also note ValidateInputAttribute is false, so it's up to you to defends against XSS. Also there is an Action method which simply saves the file inside Upload Folder. I am uploading the file using Jquery Form Plugin. Here is the code which is found in insert_image.html inside addons folder, function ChangeImage() { var myform=document.getElementById("formUpload"); $(myform).ajaxSubmit({success: function(responseText){ insertImage(responseText); window.close(); } }); } and here is the Index View which simply renders the html of Editor which was saved in Session <%@ Page Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage" %> <asp:Content ID="indexTitle" ContentPlaceHolderID="TitleContent" runat="server"> Home Page </asp:Content> <asp:Content ID="indexContent" ContentPlaceHolderID="MainContent" runat="server"> <h2><%= Html.Encode(ViewData["Message"]) %></h2> <p> To learn more about ASP.NET MVC visit <a href="http://asp.net/mvc" title="ASP.NET MVC Website">http://asp.net/mvc</a>. </p> <%if (Session["html"] != null){ Response.Write(Session["html"].ToString()); } %> </asp:Content> Summary: Hopefully you will enjoy this article. Just download the code and see the effect. From security point, you must handle the XSS attack your self. I had uploaded the sample application in http://www.speedfile.org/155076

Read the article

Large File Upload in SharePoint 2010

- by Sahil Malik

Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). Okay this is a big BIG B-I-G problem. And with SP2010 it’s going to be more prominent, because atleast at the server side, SharePoint can support large files much much better than SharePoint 2007 ever did. The issue with very large files being uploaded through any browser based API are - Reliably transferring gigabyte or bigger files without breakages over a protocol like HTTP, which is better suited for tiny transfers like images and text. Not killing your browser because it has to load all that in memory Not killing your web server because All that you upload through HTTP post, first gets streamed into IIS Memory, w3wp.exe memory before the ENTIRE FILE finishes uploading .. before it is stored. Which means, You cannot show an accurate and live progress bar of the upload, IIS gives you no such accurate metric of an upload. All the counters it gives you are approximate. Your w3wp.exe eats up all server memory – 4GB of it, for a 4GB upload. A thread is kept busy for the entire duration of the upload, thereby greatly limiting your web server’s capability to serve newer requests. Kills effective load balancing. Not killing your content database because, As you are uploading a very large file, that large file gets written sequentially into the DB, and therefore for a very large file very severely impacts the database performance. I had put together another video showing RBS usage in SharePoint 2010. I talked about many practical ramifications of using RBS in SharePoint in that video. Note that enabling large file support will never ever be a point and click job, simply because there are too many questions one needs to ask, and too many things one needs to plan for. However, one part that will remain common across all large file upload scenarios, in SharePoint or outside of SharePoint is to do it efficiently while not killing the web server. In this video, I describe using the Telerik Silverlight Upload control with SharePoint 2010 to enable efficient large file uploads in SharePoint. Presenting .. The video Comment on the article ....

Read the article

Silverlight Cream for April 04, 2010 -- #830

- by Dave Campbell

In this Issue: Michael Washington, Hassan, David Anson, Jeff Wilcox, UK Application Development Consulting, Davide Zordan, Victor Gaudioso, Anoop Madhusudanan, Phil Middlemiss, and Laurent Bugnion. Shoutouts: Josh Smith has a good-read post up: Design-time data is still data Shawn Hargreaves reported his MIX demo released From SilverlightCream.com: Silverlight MVVM: Enabling Design-Time Data in Expression Blend When Using Web Services Michael Washington has a tutorial up on MVVM and using a web service to get design-time data that works in Blend also... lots of information and screenshots. WP7 Transition Animation Hassan has a new WP7 tutorial up that demonstrates playing media and adding transition animation between pages. Tip: For a truly read-only custom DependencyProperty in Silverlight, use a read-only CLR property instead David Anson's latest tip is in response to comments on his previous post and details one by Dr. WPF who points out that a read-only DependencyProperty doesn't actually need to be a DependencyProperty as long as the class implements INotifyPropertyChanged. Template parts and custom controls (quick tip) Jeff Wilcox has posted a set of tips and recommendations to use when developing control development in Silverlight ... this is a post to bookmark. Flexible Data Template Support in Silverlight The UK Application Development Consulting details a 'problem' in Silverlight that doesn't exist in WPF and that is data templates that vary by type... and discusses a way around it. Multi-Touch enabling Silverlight Simon using Blend behaviors and the Surface sample for Silverlight Davide Zordan brought Multi-Touch to the Silverlight Simon game on CodePlex using Blend Behaviors. New Video Tutorial: How to Use a Behavior to Fire Methods from Objects in Styles Victor Gaudioso has a video tutorial up responding to a question from a developer. He demonstrates development of a Behavior that can be attached to objects in or out of Styles that allows you to specify what Method they need to fire. Creating a Silverlight Client for @shanselman ’s Nerd Dinner, using oData and Bing Maps Anoop Madhusudanan took Scott Hanselman's post on an OData API for StackOverflow, and has created a Silverlight client for Nerd Dinner, including BingMaps. A Chrome and Glass Theme - Part 2 Phil Middlemiss has the next part of his Chrome and Glass Theme up. In this one he creates a very nice chrome-look button with visual state changes. MVVM Light Toolkit V3 SP1 for Windows Phone 7 Laurent Bugnion has released a new version of MVVM Light for WP7. Included is an installation manual and information about what was changed. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

Java Spotlight Episode 139: Mark Heckler and José Pereda on JES based Energy Monitoring @MkHeck @JPeredaDnr

- by Roger Brinkley

Interview with Mark Heckler and José Pereda on using JavaSE Embedded with the Java Embedded Suite on a RaspberryPI along with a JavaFX client to monitor an energy production system and their JavaOne Tutorial- Java Embedded EXTREME MASHUPS: Building self-powering sensor nets for the IoT Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link: Java Spotlight Podcast in iTunes. Show Notes News Java Virtual Developer Day Session Videos Available JavaFX Maven Plugin 2.0 Released JavaFX Scene Builder 1.1 build b28 FXForm 2 release 0.2.2 OpenJDK8/Zero cross compile build for Foundation model HSAIL-based GPU offload: the Quest for Java Performance Begins Progress on Moving to Gradle Java EE 7 Launch Keynote Replay Java EE 7 Technical Breakouts Replay Java EE 7 support in NetBeans 7.3.1 Java EE 7 support in Eclipse 4.3 Java Magazine - May/June Events Jul 16-19, Uberconf, Denver, USA Jul 22-24, JavaOne Shanghai, China Jul 29-31, JVM Language Summit, Santa Clara Sep 11-12, JavaZone, Oslo, Norway Sep 19-20, Strange Loop, St. Louis Sep 22-26 JavaOne San Francisco 2013, USA Feature Interview Mark Heckler is an Oracle Corporation Java/Middleware/Core Tech Engineer with development experience in numerous environments. He has worked for and with key players in the manufacturing, emerging markets, retail, medical, telecom, and financial industries to develop and deliver critical capabilities on time and on budget. Currently, he works primarily with large government customers using Java throughout the stack and across the enterprise. He also participates in open-source development at every opportunity, being a JFXtras project committer and developer of DialogFX, MonologFX, and various other projects. When Mark isn't working with Java, he enjoys writing about his experiences at the Java Jungle website (https://blogs.oracle.com/javajungle/) and on Twitter (@MkHeck). José Pereda is a Structural Engineer working in the School of Engineers in the University of Valladolid in Spain for more than 15 years, and his passion is related to applying programming to solve real problems. Being involved with Java since 1999, José shares his time between JavaFX and the Embedded world, developing commercial applications and open source projects (https://github.com/jperedadnr), and blogging (http://jperedadnr.blogspot.com.es/) or tweeting (@JPeredaDnr) of both. What’s Cool AquaFX 0.1 - Mac OS X skin for JavaFX by Claudine Zillmann DromblerFX adds a docking framework Part 2 of Gerrit’s taming the Nashorn for writing JavaFX apps in Javascript Tool from mihosoft called JSelect for quickly switching JDKs Apache Maven Javadoc Plugin 2.9.1 Released Proposal: Java Concurrency Stress tests (jcstress) Slide-free Code-driven session at SV JUG JavaOne approvals/rejects gone out

Read the article

Need to Know

- by Tony Davis

Sometimes, I wonder whether writers of documentation, tutorials and articles stop to ask themselves one very important question: Does the reader really need to know this? I recently took on the task of writing a concise series of articles about the transaction log, what is it, how it works and why it's important. It was an enjoyable task; rather like peering inside a giant, complex clock mechanism. Initially, one sees only the basic components, which work to guarantee the integrity of database transactions, and preserve these transactions so that data can be restored to a previous point in time. On closer inspection, one notices all of small, arcane mechanisms that are necessary to make this happen; LSNs, virtual log files, log chains, database checkpoints, and so on. It was engrossing, escapist, stuff; what I'd written looked weighty and steeped in mysterious significance. Suddenly, however, I jolted myself back to reality with the awful thought "does anyone really need to know all this?" The driver of a car needs only to be dimly aware of what goes on under the hood, however exciting the mechanism is to the engineer. Similarly, while everyone who uses SQL Server ought to be aware of the transaction log, its role in guaranteeing the ACID properties, and how to control its growth, the intricate mechanisms ticking away under its clock face are a world away from the daily work of the harassed developer. The DBA needs to know more, such as the correct rituals for ensuring optimal performance and data integrity, setting the appropriate growth characteristics, backup routines, restore procedures, and so on. However, even then, the average DBA only needs to understand enough about the arcane processes to spot problems and react appropriately, or to know how to Google for the best way of dealing with it. The art of technical writing is tied up in intimate knowledge of your audience and what they need to know at any point. It means serving up just enough at each point to help the reader in a practical way, but not to overcook it, or stuff the reader with information that does them no good. When I think of the books and articles that have helped me the most, they have been full of brief, practical, and well-informed guidance, based on experience. This seems far-removed from the 900-page "beginner's guides" that one now sees everywhere. The more I write and edit, the more I become convinced that the real art of technical communication lies in knowing what to leave out. In what areas do the SQL Server technical materials suffer from "information overload"? Where else does it seem that concise, practical advice is drowned out by endless discussion of the "clock mechanisms"? Cheers, Tony.

Read the article

What's a good scheme for multi-user database synchronization?

- by Mason Wheeler

I'm working on a system to allow multiple users to collaborate on an online project. Everything is fairly straightforward, except for keeping the users in sync. Each user has their own local copy of the project database, which allows them to make changes and test things out, and then send the updates to the central server. But this runs into the classic synchronization question: how do you keep two users from editing the same thing and stomping each other's work? I've got an idea that should work, but I wonder if there's a simpler way to do it. Here's the basic concept: All project data is stored in a relational database. Each row in the database has an owner. If the current user is not the owner, he can read but not write that row. (This is enforced client-side.) The user can send a request to the server to take ownership of a row, which will be granted if the server's copy says that the current owner is NULL, or to release ownership when they're done with it. It is not possible to release ownership without committing changes to the server. It is not possible to commit changes to the server without having first downloaded all outstanding changes to the server. When any changes are made to rows you own, a trigger marks that row as Dirty. When you commit changes, the database is scanned for all Dirty rows in all tables, and the data is serialized into an update file, which is posted to the server, and all rows are marked Clean. The server applies the updates on its end, and keeps the file around. When other users download changes, the server sends them the update files that they haven't already received. So, essentially this is a reinvention of version control on a relational database. (Sort of.) As long as taking ownership and applying updates to the server are guaranteed atomic changes, and the server verifies that some smart-aleck user didn't edit their local database so they could send an update for a row they don't have ownership of, it should be guaranteed to be correct, and with no need to worry about merges and merge conflicts. (I think.) Can anyone think of any problems with this scheme, or ways to do it better? (And no, "build [insert VCS here] into your project" is not what I'm looking for. I've thought of that already. VCSs work well with text, and not so well with other file formats, such as relational databases.)

Read the article

Silverlight Cream for December 28, 2010 -- #1017

- by Dave Campbell

In this Issue: Davide Zordan, Alex Golesh, Michael S. Scherotter, Andrej Tozon, Alex Knight, Jeff Blankenburg(-2-), Jeremy Likness, and Laurent Bugnion. Above the Fold: Silverlight: "My “What’s new in Silverlight 4 demo” app" Andrej Tozon WP7: "Taking a screenshot from within a Silverlight #WP7 application" Laurent Bugnion Expression Blend: "PathListBox: getting started" Alex Knight Shoutouts: If you haven't seen this SurfCube app demo on YouTube yet... check it out now: SurfCube V1.0 Windows Phone 7 Browser Want to get a free WP7 class from Shawn Wildermuth? Check this out: Webinar: Writing your first Windows Phone 7 Application Koen Zwikstra announed the next preview of his great tool: Silverlight Spy Preview 2 From SilverlightCream.com: Using the Multi-Touch Behavior in a Windows Phone 7 Multi-Page application Davide Zordan has a post up responding to questions he receives about multi-touch on WP7 in applications spanning more than one page. Silverlight for Windows Phone 7 Quick Tip: Fix missing icons while using DatePicker/TimePicker controls Alex Golesh discusses the use of the DatePicker control from the WP7 toolkit and found an unpleasant surprise associated with the Done/Cancel icons in the ApplicationBar, and has a solution for us. Updated SMF Thumbnail Scrubbing Sample Code Michael S. Scherotter has a post up about an update he's done to Silverlight 4 of code that allows thumbnail views of a video while 'scrubbing' ... don't know what that is? read the post :) My “What’s new in Silverlight 4 demo” app Andrej Tozon admits he's a little behind with this post, but as he points out, it might be a good time to review Silverlight 4 features, on the eve of 5. PathListBox: getting started One half the Knight team -- Alex Knight this time, has the first post of a series on the PathListBox up ... some real Expression Blend goodness. What I Learned in WP7 – Issue #9 Two more from Jeff Blankenburg today, in his number 9, he starts off demonstrating passing data between pages when navigating and fnishes up with some excellent info for submitting apps to the marketplace. What I Learned in WP7 – #Issue 10 Jeff Blankenburg's number 10 elaborates on the query string data he discussed in number 9. Using Sterling in Windows Phone 7 Applications Who better than the author?? Jeremy Likness has an end-to-end WP7/Sterling app up on his blog... begin with downloading Sterling, discuss what's needed to support Tombstoning, even custom serialization. Taking a screenshot from within a Silverlight #WP7 application Laurent Bugnion has a post up describing something people have been looking for: getting a screenshot of a WP7 application's page. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

help with fixing fwts errors log

- by jasmines

Here is an extract of results.log: MTRR validation. Test 1 of 3: Validate the kernel MTRR IOMEM setup. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xc0000000 to 0xdfffffff (PCI Bus 0000:00) has incorrect attribute Write-Combining. FAILED [MEDIUM] MTRRIncorrectAttr: Test 1, Memory range 0xfee01000 to 0xffffffff (PCI Bus 0000:00) has incorrect attribute Write-Protect. ==================================================================================================== Test 1 of 1: Kernel log error check. Kernel message: [ 0.208079] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ADVICE: This is not exactly a failure mode but a warning from the kernel. The _OSI() method has implemented a match to the 'Linux' query in the DSDT and this is redundant because the ACPI driver matches onto the Windows _OSI strings by default. FAILED [HIGH] KlogACPIErrorMethodExecutionParse: Test 1, HIGH Kernel message: [ 3.512783] ACPI Error : Method parse/execution failed [\_SB_.PCI0.GFX0._DOD] (Node f7425858), AE_AML_PACKAGE_LIMIT (20110623/psparse-536) ADVICE: This is a bug picked up by the kernel, but as yet, the firmware test suite has no diagnostic advice for this particular problem. Found 1 unique errors in kernel log. ==================================================================================================== Check if system is using latest microcode. ---------------------------------------------------------------------------------------------------- Cannot read microcode file /usr/share/misc/intel-microcode.dat. Aborted test, initialisation failed. ==================================================================================================== MSR register tests. FAILED [MEDIUM] MSRCPUsInconsistent: Test 1, MSR SYSENTER_ESP (0x175) has 1 inconsistent values across 2 CPUs for (shift: 0 mask: 0xffffffffffffffff). MSR CPU 0 -> 0xf7bb9c40 vs CPU 1 -> 0xf7bc7c40 FAILED [MEDIUM] MSRCPUsInconsistent: Test 1, MSR MISC_ENABLE (0x1a0) has 1 inconsistent values across 2 CPUs for (shift: 0 mask: 0x400c51889). MSR CPU 0 -> 0x850088 vs CPU 1 -> 0x850089 ==================================================================================================== Checks firmware has set PCI Express MaxReadReq to a higher value on non-motherboard devices. ---------------------------------------------------------------------------------------------------- Test 1 of 1: Check firmware settings MaxReadReq for PCI Express devices. MaxReadReq for pci://00:00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) is low (128) [Audio device]. MaxReadReq for pci://00:02:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection is low (128) [Network controller]. FAILED [LOW] LowMaxReadReq: Test 1, 2 devices have low MaxReadReq settings. Firmware may have configured these too low. ADVICE: The MaxReadRequest size is set too low and will affect performance. It will provide excellent bus sharing at the cost of bus data transfer rates. Although not a critical issue, it may be worth considering setting the MaxReadRequest size to 256 or 512 to increase throughput on the PCI Express bus. Some drivers (for example the Brocade Fibre Channel driver) allow one to override the firmware settings. Where possible, this BIOS configuration setting is worth increasing it a little more for better performance at a small reduction of bus sharing. ==================================================================================================== PCIe ASPM check. ---------------------------------------------------------------------------------------------------- Test 1 of 2: PCIe ASPM ACPI test. PCIE ASPM is not controlled by Linux kernel. ADVICE: BIOS reports that Linux kernel should not modify ASPM settings that BIOS configured. It can be intentional because hardware vendors identified some capability bugs between the motherboard and the add-on cards. Test 2 of 2: PCIe ASPM registers test. WARNING: Test 2, RP 00h:1Ch.01h L0s not enabled. WARNING: Test 2, RP 00h:1Ch.01h L1 not enabled. WARNING: Test 2, Device 02h:00h.00h L0s not enabled. WARNING: Test 2, Device 02h:00h.00h L1 not enabled. PASSED: Test 2, PCIE aspm setting matched was matched. WARNING: Test 2, RP 00h:1Ch.05h L0s not enabled. WARNING: Test 2, RP 00h:1Ch.05h L1 not enabled. WARNING: Test 2, Device 85h:00h.00h L0s not enabled. WARNING: Test 2, Device 85h:00h.00h L1 not enabled. PASSED: Test 2, PCIE aspm setting matched was matched. ==================================================================================================== Extract and analyse Windows Management Instrumentation (WMI). Test 1 of 2: Check Windows Management Instrumentation in DSDT Found WMI Method WMAA with GUID: 5FB7F034-2C63-45E9-BE91-3D44E2C707E4, Instance 0x01 Found WMI Event, Notifier ID: 0x80, GUID: 95F24279-4D7B-4334-9387-ACCDC67EF61C, Instance 0x01 PASSED: Test 1, GUID 95F24279-4D7B-4334-9387-ACCDC67EF61C is handled by driver hp-wmi (Vendor: HP). Found WMI Event, Notifier ID: 0xa0, GUID: 2B814318-4BE8-4707-9D84-A190A859B5D0, Instance 0x01 FAILED [MEDIUM] WMIUnknownGUID: Test 1, GUID 2B814318-4BE8-4707-9D84-A190A859B5D0 is unknown to the kernel, a driver may need to be implemented for this GUID. ADVICE: A WMI driver probably needs to be written for this event. It can checked for using: wmi_has_guid("2B814318-4BE8-4707-9D84-A190A859B5D0"). One can install a notify handler using wmi_install_notify_handler("2B814318-4BE8-4707-9D84-A190A859B5D0", handler, NULL). http://lwn.net/Articles/391230 describes how to write an appropriate driver. Found WMI Object, Object ID AB, GUID: 05901221-D566-11D1-B2F0-00A0C9062910, Instance 0x01, Flags: 00 Found WMI Method WMBA with GUID: 1F4C91EB-DC5C-460B-951D-C7CB9B4B8D5E, Instance 0x01 Found WMI Object, Object ID BC, GUID: 2D114B49-2DFB-4130-B8FE-4A3C09E75133, Instance 0x7f, Flags: 00 Found WMI Object, Object ID BD, GUID: 988D08E3-68F4-4C35-AF3E-6A1B8106F83C, Instance 0x19, Flags: 00 Found WMI Object, Object ID BE, GUID: 14EA9746-CE1F-4098-A0E0-7045CB4DA745, Instance 0x01, Flags: 00 Found WMI Object, Object ID BF, GUID: 322F2028-0F84-4901-988E-015176049E2D, Instance 0x01, Flags: 00 Found WMI Object, Object ID BG, GUID: 8232DE3D-663D-4327-A8F4-E293ADB9BF05, Instance 0x01, Flags: 00 Found WMI Object, Object ID BH, GUID: 8F1F6436-9F42-42C8-BADC-0E9424F20C9A, Instance 0x00, Flags: 00 Found WMI Object, Object ID BI, GUID: 8F1F6435-9F42-42C8-BADC-0E9424F20C9A, Instance 0x00, Flags: 00 Found WMI Method WMAC with GUID: 7391A661-223A-47DB-A77A-7BE84C60822D, Instance 0x01 Found WMI Object, Object ID BJ, GUID: DF4E63B6-3BBC-4858-9737-C74F82F821F3, Instance 0x05, Flags: 00 ==================================================================================================== Disassemble DSDT to check for _OSI("Linux"). ---------------------------------------------------------------------------------------------------- Test 1 of 1: Disassemble DSDT to check for _OSI("Linux"). This is not strictly a failure mode, it just alerts one that this has been defined in the DSDT and probably should be avoided since the Linux ACPI driver matches onto the Windows _OSI strings { If (_OSI ("Linux")) { Store (0x03E8, OSYS) } If (_OSI ("Windows 2001")) { Store (0x07D1, OSYS) } If (_OSI ("Windows 2001 SP1")) { Store (0x07D1, OSYS) } If (_OSI ("Windows 2001 SP2")) { Store (0x07D2, OSYS) } If (_OSI ("Windows 2006")) { Store (0x07D6, OSYS) } If (LAnd (MPEN, LEqual (OSYS, 0x07D1))) { TRAP (0x01, 0x48) } TRAP (0x03, 0x35) } WARNING: Test 1, DSDT implements a deprecated _OSI("Linux") test. ==================================================================================================== 0 passed, 0 failed, 1 warnings, 0 aborted, 0 skipped, 0 info only. ==================================================================================================== ACPI DSDT Method Semantic Tests. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP Failed to install global event handler. Test 22 of 93: Check _PSR (Power Source). ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 22, Detected an infinite loop when evaluating method '\_SB_.AC__._PSR'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. PASSED: Test 22, \_SB_.AC__._PSR correctly acquired and released locks 16 times. Test 35 of 93: Check _TMP (Thermal Zone Current Temp). ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 35, Detected an infinite loop when evaluating method '\_TZ_.DTSZ._TMP'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. PASSED: Test 35, \_TZ_.DTSZ._TMP correctly acquired and released locks 14 times. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 35, Detected an infinite loop when evaluating method '\_TZ_.CPUZ._TMP'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. PASSED: Test 35, \_TZ_.CPUZ._TMP correctly acquired and released locks 10 times. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 35, Detected an infinite loop when evaluating method '\_TZ_.SKNZ._TMP'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. PASSED: Test 35, \_TZ_.SKNZ._TMP correctly acquired and released locks 10 times. PASSED: Test 35, _TMP correctly returned sane looking value 0x00000b4c (289.2 degrees K) PASSED: Test 35, \_TZ_.BATZ._TMP correctly acquired and released locks 9 times. PASSED: Test 35, _TMP correctly returned sane looking value 0x00000aac (273.2 degrees K) PASSED: Test 35, \_TZ_.FDTZ._TMP correctly acquired and released locks 7 times. Test 46 of 93: Check _DIS (Disable). FAILED [MEDIUM] MethodShouldReturnNothing: Test 46, \_SB_.PCI0.LPCB.SIO_.COM1._DIS returned values, but was expected to return nothing. Object returned: INTEGER: 0x00000000 ADVICE: This probably won't cause any errors, but it should be fixed as the AML code is not conforming to the expected behaviour as described in the ACPI specification. FAILED [MEDIUM] MethodShouldReturnNothing: Test 46, \_SB_.PCI0.LPCB.SIO_.LPT0._DIS returned values, but was expected to return nothing. Object returned: INTEGER: 0x00000000 ADVICE: This probably won't cause any errors, but it should be fixed as the AML code is not conforming to the expected behaviour as described in the ACPI specification. Test 61 of 93: Check _WAK (System Wake). Test _WAK(1) System Wake, State S1. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 61, Detected an infinite loop when evaluating method '\_WAK'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. Test _WAK(2) System Wake, State S2. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 61, Detected an infinite loop when evaluating method '\_WAK'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. Test _WAK(3) System Wake, State S3. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 61, Detected an infinite loop when evaluating method '\_WAK'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. Test _WAK(4) System Wake, State S4. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 61, Detected an infinite loop when evaluating method '\_WAK'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. Test _WAK(5) System Wake, State S5. ACPICA Exception AE_AML_INFINITE_LOOP during execution of method COMP WARNING: Test 61, Detected an infinite loop when evaluating method '\_WAK'. ADVICE: This may occur because we are emulating the execution in this test environment and cannot handshake with the embedded controller or jump to the BIOS via SMIs. However, the fact that AML code spins forever means that lockup conditions are not being checked for in the AML bytecode. Test 87 of 93: Check _BCL (Query List of Brightness Control Levels Supported). Package has 2 elements: 00: INTEGER: 0x00000000 01: INTEGER: 0x00000000 FAILED [MEDIUM] Method_BCLElementCount: Test 87, Method _BCL should return a package of more than 2 integers, got just 2. Test 88 of 93: Check _BCM (Set Brightness Level). ACPICA Exception AE_AML_PACKAGE_LIMIT during execution of method _BCM FAILED [CRITICAL] AEAMLPackgeLimit: Test 88, Detected error 'Package limit' when evaluating '\_SB_.PCI0.GFX0.DD02._BCM'. ==================================================================================================== ACPI table settings sanity checks. ---------------------------------------------------------------------------------------------------- Test 1 of 1: Check ACPI tables. PASSED: Test 1, Table APIC passed. Table ECDT not present to check. FAILED [MEDIUM] FADT32And64BothDefined: Test 1, FADT 32 bit FIRMWARE_CONTROL is non-zero, and X_FIRMWARE_CONTROL is also non-zero. Section 5.2.9 of the ACPI specification states that if the FIRMWARE_CONTROL is non-zero then X_FIRMWARE_CONTROL must be set to zero. ADVICE: The FADT FIRMWARE_CTRL is a 32 bit pointer that points to the physical memory address of the Firmware ACPI Control Structure (FACS). There is also an extended 64 bit version of this, the X_FIRMWARE_CTRL pointer that also can point to the FACS. Section 5.2.9 of the ACPI specification states that if the X_FIRMWARE_CTRL field contains a non zero value then the FIRMWARE_CTRL field *must* be zero. This error is also detected by the Linux kernel. If FIRMWARE_CTRL and X_FIRMWARE_CTRL are defined, then the kernel just uses the 64 bit version of the pointer. PASSED: Test 1, Table HPET passed. PASSED: Test 1, Table MCFG passed. PASSED: Test 1, Table RSDT passed. PASSED: Test 1, Table RSDP passed. Table SBST not present to check. PASSED: Test 1, Table XSDT passed. ==================================================================================================== Re-assemble DSDT and find syntax errors and warnings. ---------------------------------------------------------------------------------------------------- Test 1 of 2: Disassemble and reassemble DSDT FAILED [HIGH] AMLAssemblerError4043: Test 1, Assembler error in line 2261 Line | AML source ---------------------------------------------------------------------------------------------------- 02258| 0x00000000, // Range Minimum 02259| 0xFEDFFFFF, // Range Maximum 02260| 0x00000000, // Translation Offset 02261| 0x00000000, // Length | ^ | error 4043: Invalid combination of Length and Min/Max fixed flags 02262| ,, _Y0E, AddressRangeMemory, TypeStatic) 02263| DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, 02264| 0x00000000, // Granularity ==================================================================================================== ADVICE: (for error #4043): This occurs if the length is zero and just one of the resource MIF/MAF flags are set, or the length is non-zero and resource MIF/MAF flags are both set. These are illegal combinations and need to be fixed. See section 6.4.3.5 Address Space Resource Descriptors of version 4.0a of the ACPI specification for more details. FAILED [HIGH] AMLAssemblerError4050: Test 1, Assembler error in line 2268 Line | AML source ---------------------------------------------------------------------------------------------------- 02265| 0xFEE01000, // Range Minimum 02266| 0xFFFFFFFF, // Range Maximum 02267| 0x00000000, // Translation Offset 02268| 0x011FEFFF, // Length | ^ | error 4050: Length is not equal to fixed Min/Max window 02269| ,, , AddressRangeMemory, TypeStatic) 02270| }) 02271| Method (_CRS, 0, Serialized) ==================================================================================================== ADVICE: (for error #4050): The minimum address is greater than the maximum address. This is illegal. FAILED [HIGH] AMLAssemblerError1104: Test 1, Assembler error in line 8885 Line | AML source ---------------------------------------------------------------------------------------------------- 08882| Method (_DIS, 0, NotSerialized) 08883| { 08884| DSOD (0x02) 08885| Return (0x00) | ^ | warning level 0 1104: Reserved method should not return a value (_DIS) 08886| } 08887| 08888| Method (_SRS, 1, NotSerialized) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1104: Test 1, Assembler error in line 9195 Line | AML source ---------------------------------------------------------------------------------------------------- 09192| Method (_DIS, 0, NotSerialized) 09193| { 09194| DSOD (0x01) 09195| Return (0x00) | ^ | warning level 0 1104: Reserved method should not return a value (_DIS) 09196| } 09197| 09198| Method (_SRS, 1, NotSerialized) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1127: Test 1, Assembler error in line 9242 Line | AML source ---------------------------------------------------------------------------------------------------- 09239| CreateWordField (CRES, \_SB.PCI0.LPCB.SIO.LPT0._CRS._Y21._MAX, MAX2) 09240| CreateByteField (CRES, \_SB.PCI0.LPCB.SIO.LPT0._CRS._Y21._LEN, LEN2) 09241| CreateWordField (CRES, \_SB.PCI0.LPCB.SIO.LPT0._CRS._Y22._INT, IRQ0) 09242| CreateWordField (CRES, \_SB.PCI0.LPCB.SIO.LPT0._CRS._Y23._DMA, DMA0) | ^ | warning level 0 1127: ResourceTag smaller than Field (Tag: 8 bits, Field: 16 bits) 09243| If (RLPD) 09244| { 09245| Store (0x00, Local0) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1128: Test 1, Assembler error in line 18682 Line | AML source ---------------------------------------------------------------------------------------------------- 18679| Store (0x01, Index (DerefOf (Index (Local0, 0x02)), 0x01)) 18680| If (And (WDPE, 0x40)) 18681| { 18682| Wait (\_SB.BEVT, 0x10) | ^ | warning level 0 1128: Result is not used, possible operator timeout will be missed 18683| } 18684| 18685| Store (BRID, Index (DerefOf (Index (Local0, 0x02)), 0x02)) ==================================================================================================== ADVICE: (for warning level 0 #1128): The operation can possibly timeout, and hence the return value indicates an timeout error. However, because the return value is not checked this very probably indicates that the code is buggy. A possible scenario is that a mutex times out and the code attempts to access data in a critical region when it should not. This will lead to undefined behaviour. This should be fixed. Table DSDT (0) reassembly: Found 2 errors, 4 warnings. Test 2 of 2: Disassemble and reassemble SSDT PASSED: Test 2, SSDT (0) reassembly, Found 0 errors, 0 warnings. FAILED [HIGH] AMLAssemblerError1104: Test 2, Assembler error in line 60 Line | AML source ---------------------------------------------------------------------------------------------------- 00057| { 00058| Store (CPDC (Arg0), Local0) 00059| GCAP (Local0) 00060| Return (Local0) | ^ | warning level 0 1104: Reserved method should not return a value (_PDC) 00061| } 00062| 00063| Method (_OSC, 4, NotSerialized) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1104: Test 2, Assembler error in line 174 Line | AML source ---------------------------------------------------------------------------------------------------- 00171| { 00172| Store (\_PR.CPU0.CPDC (Arg0), Local0) 00173| GCAP (Local0) 00174| Return (Local0) | ^ | warning level 0 1104: Reserved method should not return a value (_PDC) 00175| } 00176| 00177| Method (_OSC, 4, NotSerialized) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1104: Test 2, Assembler error in line 244 Line | AML source ---------------------------------------------------------------------------------------------------- 00241| { 00242| Store (\_PR.CPU0.CPDC (Arg0), Local0) 00243| GCAP (Local0) 00244| Return (Local0) | ^ | warning level 0 1104: Reserved method should not return a value (_PDC) 00245| } 00246| 00247| Method (_OSC, 4, NotSerialized) ==================================================================================================== FAILED [HIGH] AMLAssemblerError1104: Test 2, Assembler error in line 290 Line | AML source ---------------------------------------------------------------------------------------------------- 00287| { 00288| Store (\_PR.CPU0.CPDC (Arg0), Local0) 00289| GCAP (Local0) 00290| Return (Local0) | ^ | warning level 0 1104: Reserved method should not return a value (_PDC) 00291| } 00292| 00293| Method (_OSC, 4, NotSerialized) ==================================================================================================== Table SSDT (1) reassembly: Found 0 errors, 4 warnings. PASSED: Test 2, SSDT (2) reassembly, Found 0 errors, 0 warnings. PASSED: Test 2, SSDT (3) reassembly, Found 0 errors, 0 warnings. ==================================================================================================== 3 passed, 10 failed, 0 warnings, 0 aborted, 0 skipped, 0 info only. ==================================================================================================== Critical failures: 1 method test, at 1 log line: 1449: Detected error 'Package limit' when evaluating '\_SB_.PCI0.GFX0.DD02._BCM'. High failures: 11 klog test, at 1 log line: 121: HIGH Kernel message: [ 3.512783] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DOD] (Node f7425858), AE_AML_PACKAGE_LIMIT (20110623/psparse-536) syntaxcheck test, at 1 log line: 1668: Assembler error in line 2261 syntaxcheck test, at 1 log line: 1687: Assembler error in line 2268 syntaxcheck test, at 1 log line: 1703: Assembler error in line 8885 syntaxcheck test, at 1 log line: 1716: Assembler error in line 9195 syntaxcheck test, at 1 log line: 1729: Assembler error in line 9242 syntaxcheck test, at 1 log line: 1742: Assembler error in line 18682 syntaxcheck test, at 1 log line: 1766: Assembler error in line 60 syntaxcheck test, at 1 log line: 1779: Assembler error in line 174 syntaxcheck test, at 1 log line: 1792: Assembler error in line 244 syntaxcheck test, at 1 log line: 1805: Assembler error in line 290 Medium failures: 9 mtrr test, at 1 log line: 76: Memory range 0xc0000000 to 0xdfffffff (PCI Bus 0000:00) has incorrect attribute Write-Combining. mtrr test, at 1 log line: 78: Memory range 0xfee01000 to 0xffffffff (PCI Bus 0000:00) has incorrect attribute Write-Protect. msr test, at 1 log line: 165: MSR SYSENTER_ESP (0x175) has 1 inconsistent values across 2 CPUs for (shift: 0 mask: 0xffffffffffffffff). msr test, at 1 log line: 173: MSR MISC_ENABLE (0x1a0) has 1 inconsistent values across 2 CPUs for (shift: 0 mask: 0x400c51889). wmi test, at 1 log line: 528: GUID 2B814318-4BE8-4707-9D84-A190A859B5D0 is unknown to the kernel, a driver may need to be implemented for this GUID. method test, at 1 log line: 1002: \_SB_.PCI0.LPCB.SIO_.COM1._DIS returned values, but was expected to return nothing. method test, at 1 log line: 1011: \_SB_.PCI0.LPCB.SIO_.LPT0._DIS returned values, but was expected to return nothing. method test, at 1 log line: 1443: Method _BCL should return a package of more than 2 integers, got just 2. acpitables test, at 1 log line: 1643: FADT 32 bit FIRMWARE_CONTROL is non-zero, and X_FIRMWARE_CONTROL is also non-zero. Se

Read the article

10 PowerShell One Liners

- by BizTalk Visionary

Here are a few one-liners that use NetCmdlets. Some of these I've blogged about before, some are new. Let me know if you have questions, which ones you find useful, or how you altered these to suit your own needs. Send email to a list of recipient addresses: import-csv users.csv | % { send-email -to $_.email -from [email protected] -subject "Important Email" –message "Hello World!" -server 10.0.1.1 } Show the access control list for a specific Exchange folder: get-imap -server $mymailserver -cred $mycred -folder INBOX.RESUMES –acl Add look and read permissions on an Exchange folder, for a list of accounts pulled from a CSV file: import-csv users.csv | % { set-imap -server -acluser $_.username $mymailserver -cred $mycred -folder INBOX.RESUMES –acl “lr” } Sync system time with an Internet time server: get-time -server clock.psu.edu –set To remotely sync the time on a set of computers: import-csv computers.csv | % { Invoke-Command -computerName $_.computer -cred $mycred -scriptblock { get-time -server clock.psu.edu –set } } Delete all emails from an Exchange folder that match a certain criteria. For example, delete all emails from [email protected]: get-imap -server $mailserver –cred $mycred | ? {$_.FromEmail -eq [email protected]} | %{ set-imap -server $mailserver –cred $mycred-message $_.Id -delete } Update Twitter status from PowerShell: get-http –url "http://twitter.com/statuses/update.xml" –cred $mycred -variablename status -variablevalue "Tweeting with NetCmdlets!" A test-path that works over FTP, FTPS (SSL), and SFTP (SSH) connections: get-ftp -server $remoteserver –cred $mycred -path /remote/path/to/checkfor* Don't forget the *. Also, to use SSL or SSH just add an –ssl or –ssh parameter. List disabled user accounts in Active Directory (or any other LDAP server): get-ldap -server $ad -cred $mycred -dn dc=yourdc -searchscope wholesubtree -search "(&(objectclass=user)(objectclass=person)(company=*)(userAccountControl:1.2.840.113556.1.4.803:=2))" List Active Directory groups and their members: get-ldap -server testman -cred $mycred -dn dc=NS2 -searchscope wholesubtree -search "(&(objectclass=group)(cn=*admin*))" | select ResultDN, member Display the last initialization time (e.g. last reboot time) of all discoverable SNMP agents on a network: import-csv computers.csv | % { get-snmp -agent $_.computer -oid sysUpTime.0 | %{([datetime]::Now).AddSeconds(-($_.OIDValue/100))} } Not mentioned here: data conversion (Yenc, QP, UUencoding, MD5, SHA1, base64, etc), DNS, News Groups (NNTP/UseNet), POP mail, RSS feeds, Amazon S3, Syslog, TFTP, TraceRoute, SNMP Traps, UDP, WebDAV, whois, Rexec/Rshell/Telnet, Zip files, sending IMs (Jabber/GoogleTalk/XMPP), sending text messages and pages, ping, and more. Original Source: Lance's Textbox

Read the article

Japan Welcomes Oracle Enterprise Manager 12c

- by Anand Akela

Following Oracle’s grand unveiling of Oracle Enterprise Manager 12c at Oracle OpenWorld 2011 in San Francisco, Oracle Japan just completed their launch for the product. Leng Tan, Oracle VP of Products, delivered the keynote with collaboration from a number of key partners in the region. From left to right: Leng Tan, VP of Products, Oracle; Shinyashiki-san, Assistant General Manager, NEC; Fuketa-san, General Manager, HITACHI; Fujii-san, General Manager, Fujitsu; Misawa-san, VP of Alliances, Oracle Japan NEC, Hitachi and Fujitsu have been among Oracle’s most active partners in the Japan region. They have received key awards from Oracle Japan for their efforts. NEC received the partner of the year award for 2010 and 2011. Hitachi received the partner of the year award for Oracle Enterprise Manager in 2011. Fujitsu received awards in the areas of Database and Oracle Exadata in 2011. All three partners were active participants in Oracle Enterprise Manager 12c beta program. According to Hirai-san, the technical lead at the event, there were over 200 attendees. “The event was so well-attended; there was no room to stand.” Said Hirai-san. Hirai-san demonstrating Oracle Enterprise Manager 12c at the Oracle Japan launch Here’s the highlight of the presentations made by the Oracle partners during this launch. NEC has developed an Oracle Enterprise Manager Plug-in for iStorage (NEC SAN Storage product). Additionally, NEC’s WebSAM Invariant Analyzer management tool is now capable of integrating with Oracle Enterprise Manager HITACHI demonstrated monitoring capabilities for Oracle Exadata through Oracle Enterprise Manager in their JP1 system management tool Fujitsu’s Oracle Enterprise Manager 10g adapter for their SystemWalker tool has now been enhanced to work with Oracle Enterprise Manager 12c. Following a very successful launch in Japan, Oracle’s Total Cloud Control road show and additional Oracle Enterprise Manager 12c launches continue in the EMEA and Asia Pacific regions. This week Sushil Kumar, VP of Product Strategy and Business Development is scheduled to deliver the keynotes at several cities in India. Also this week, Richard Sarwal, SVP of Products, is scheduled to deliver a keynote at the DOAG conference in Nuremburg, Germany. Richard is also delivering the Oracle Enterprise Manger 12c launch event keynote in Paris on November 18th. Check out our event schedule for Oracle Enterprise Manager 12c events across the globe! For more information, please go to Oracle Enterprise Manager web page or follow us at : Twitter Facebook YouTube Linkedin

Read the article

Getting Current with Visual Studio 2010 for Web Developers

- by plitwin

I don't know about you, but I find it kind of crazy at times figuring out if I have the latest of everything there is for the Visual Studio 2010 developer from Microsoft. (This does not include any third-party components, just recommended updates from Microsoft.) And the be honest, the msn.microsoft.com and asp.net sites are not that helpful in figuring this out.In an effort to help, I have enumerated here what the latest VS 2010 setup should include, complete with download links. When you install everything here, you will be able to develop ASP.NET 4.0 Web Forms and ASP.NET MVC 3 applications and web sites in addition to the other stuff your version of Visual Studio supports (e.g., Silverlight, WPF, etc.). These downloads will also include NuGet and the Entity Framework 4.1, so there is no need to download this software separately.Visual Studio 2010. First of all, you need to purchase and install Visual Studio 2010 itself. For the free Express version, you can download it from Visual Web Developer 2010 ExpressVisual Studio Service Pack 1 (released Spring 2011).This is a must-have download that fixes a bunch of bugs and a number of enhancements too including preliminary support for HTML5 and CSS3. See #4 below for better support of these web technologies. Download and install from VS 2010 SP1 download page. You can find details on the features of the service pack here. ASP.NET MVC3 Tools Update (released Spring 2011)If you are using ASP.NET MVC 3, then you should also download install this update for Visual Studio from ASP.NET MVC3 Tools Update download page. This update improves Visual Studio's support for MVC 3, including better scaffolding, NuGet, Entity Framework 4.1, and more. A good overview of the updates can be found in Phil Haack's blog post.Web Standards Update for Microsoft Visual Studio 2010 SP1 (released June 2011)This is an update to VS 2010 SP1 that "brings VS 2010 intellisense & validation as close to W3C specification as we could get via means of an extension". Download and install from Web Standards Update download page. A good description of the changes can be found in the Visual Web Developer Team blog post.Note: I don't control these download pages, so it is possible they will change. If so, I will do my best to update these links. This information was current as of June 24, 2011.

Read the article

Frequent Disconnects ubuntu desktop 12.10 x64 intel 82579V e1000e

- by user112055

I'm having frequent disconnects with my new install of Ubuntu 12.10. I tried updating the kernel driver to the latest intel release to no avail. My expertise is spent. It happens anywhere between 1 min and 10 min. Any ideas? syslog: Dec 1 13:51:39 andromeda kernel: [ 972.188809] audit_printk_skb: 6 callbacks suppressed Dec 1 13:51:39 andromeda kernel: [ 972.188813] type=1701 audit(1354398699.418:199): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6039 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f26777d9205 code=0x50000 Dec 1 13:51:39 andromeda kernel: [ 972.188817] type=1701 audit(1354398699.418:200): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6039 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f26777d9205 code=0x50000 Dec 1 13:51:39 andromeda kernel: [ 972.188820] type=1701 audit(1354398699.418:201): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6039 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f26777d9205 code=0x50000 Dec 1 13:51:39 andromeda kernel: [ 972.188823] type=1701 audit(1354398699.418:202): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6039 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f26777d9205 code=0x50000 Dec 1 13:51:39 andromeda kernel: [ 972.188825] type=1701 audit(1354398699.418:203): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6039 comm="chrome" reason="seccomp" sig=0 syscall=4 compat=0 ip=0x7f26777d9205 code=0x50000 Dec 1 13:51:39 andromeda kernel: [ 972.331419] type=1701 audit(1354398699.558:204): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=6039 comm="chrome" reason="seccomp" sig=0 syscall=2 compat=0 ip=0x7f26777d96b0 code=0x50000 Dec 1 13:53:12 andromeda NetworkManager[1115]: <info> (eth0): carrier now OFF (device state 100, deferring action for 4 seconds) Dec 1 13:53:12 andromeda kernel: [ 1064.894387] e1000e: e1000e: eth0 NIC Link is Down Dec 1 13:53:16 andromeda NetworkManager[1115]: <info> (eth0): device state change: activated -> unavailable (reason 'carrier-changed') [100 20 40] Dec 1 13:53:16 andromeda NetworkManager[1115]: <info> (eth0): deactivating device (reason 'carrier-changed') [40] Dec 1 13:53:16 andromeda NetworkManager[1115]: <info> (eth0): canceled DHCP transaction, DHCP client pid 5946 Dec 1 13:53:16 andromeda avahi-daemon[890]: Withdrawing address record for fe80::ea40:f2ff:fee2:4d86 on eth0. Dec 1 13:53:16 andromeda avahi-daemon[890]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::ea40:f2ff:fee2:4d86. Dec 1 13:53:16 andromeda avahi-daemon[890]: Interface eth0.IPv6 no longer relevant for mDNS. Dec 1 13:53:16 andromeda kernel: [ 1069.025288] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Dec 1 13:53:16 andromeda avahi-daemon[890]: Withdrawing address record for 192.168.11.17 on eth0. Dec 1 13:53:16 andromeda avahi-daemon[890]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.11.17. Dec 1 13:53:16 andromeda avahi-daemon[890]: Interface eth0.IPv4 no longer relevant for mDNS. Dec 1 13:53:16 andromeda NetworkManager[1115]: <warn> DNS: plugin dnsmasq update failed Dec 1 13:53:16 andromeda NetworkManager[1115]: <info> ((null)): removing resolv.conf from /sbin/resolvconf Dec 1 13:53:16 andromeda dnsmasq[1907]: setting upstream servers from DBus Dec 1 13:53:16 andromeda dbus[800]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Dec 1 13:53:16 andromeda dbus[800]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> (eth0): carrier now ON (device state 20) Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> (eth0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40] Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Auto-activating connection '82579V'. Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) starting connection '82579V' Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> (eth0): device state change: disconnected -> prepare (reason 'none') [30 40 0] Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled... Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started... Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled... Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete. Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting... Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> (eth0): device state change: prepare -> config (reason 'none') [40 50 0] Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful. Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled. Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete. Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started... Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> (eth0): device state change: config -> ip-config (reason 'none') [50 70 0] Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Beginning DHCPv4 transaction (timeout in 45 seconds) Dec 1 13:53:32 andromeda kernel: [ 1084.938042] e1000e: e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx Dec 1 13:53:32 andromeda kernel: [ 1084.938049] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO Dec 1 13:53:32 andromeda kernel: [ 1084.938815] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> dhclient started with pid 6080 Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete. Dec 1 13:53:32 andromeda dhclient: Internet Systems Consortium DHCP Client 4.2.4 Dec 1 13:53:32 andromeda dhclient: Copyright 2004-2012 Internet Systems Consortium. Dec 1 13:53:32 andromeda dhclient: All rights reserved. Dec 1 13:53:32 andromeda dhclient: For info, please visit https://www.isc.org/software/dhcp/ Dec 1 13:53:32 andromeda dhclient: Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> (eth0): DHCPv4 state changed nbi -> preinit Dec 1 13:53:32 andromeda dhclient: Listening on LPF/eth0/e8:40:f2:e2:4d:86 Dec 1 13:53:32 andromeda dhclient: Sending on LPF/eth0/e8:40:f2:e2:4d:86 Dec 1 13:53:32 andromeda dhclient: Sending on Socket/fallback Dec 1 13:53:32 andromeda dhclient: DHCPREQUEST of 192.168.11.17 on eth0 to 255.255.255.255 port 67 Dec 1 13:53:32 andromeda dhclient: DHCPACK of 192.168.11.17 from 192.168.11.1 Dec 1 13:53:32 andromeda dhclient: bound to 192.168.11.17 -- renewal in 33576 seconds. Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> (eth0): DHCPv4 state changed preinit -> reboot Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> address 192.168.11.17 Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> prefix 24 (255.255.255.0) Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> gateway 192.168.11.1 Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> hostname 'andromeda' Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> nameserver '192.168.11.1' Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> domain name 'hsd1.ca.comcast.net' Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Configure Commit) scheduled... Dec 1 13:53:32 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) started... Dec 1 13:53:32 andromeda avahi-daemon[890]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.11.17. Dec 1 13:53:32 andromeda avahi-daemon[890]: New relevant interface eth0.IPv4 for mDNS. Dec 1 13:53:32 andromeda avahi-daemon[890]: Registering new address record for 192.168.11.17 on eth0.IPv4. Dec 1 13:53:33 andromeda NetworkManager[1115]: <info> (eth0): device state change: ip-config -> activated (reason 'none') [70 100 0] Dec 1 13:53:33 andromeda NetworkManager[1115]: <info> ((null)): writing resolv.conf to /sbin/resolvconf Dec 1 13:53:33 andromeda dnsmasq[1907]: setting upstream servers from DBus Dec 1 13:53:33 andromeda dnsmasq[1907]: using nameserver 192.168.11.1#53 Dec 1 13:53:33 andromeda NetworkManager[1115]: <info> Policy set '82579V' (eth0) as default for IPv4 routing and DNS. Dec 1 13:53:33 andromeda NetworkManager[1115]: <info> Activation (eth0) successful, device activated. Dec 1 13:53:33 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) complete. Dec 1 13:53:33 andromeda dbus[800]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Dec 1 13:53:33 andromeda dbus[800]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Dec 1 13:53:33 andromeda avahi-daemon[890]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::ea40:f2ff:fee2:4d86. Dec 1 13:53:33 andromeda avahi-daemon[890]: New relevant interface eth0.IPv6 for mDNS. Dec 1 13:53:33 andromeda avahi-daemon[890]: Registering new address record for fe80::ea40:f2ff:fee2:4d86 on eth0.*. Dec 1 13:53:41 andromeda ntpdate[6154]: adjust time server 91.189.94.4 offset 0.000928 sec Dec 1 13:53:50 andromeda NetworkManager[1115]: <info> (eth0): carrier now OFF (device state 100, deferring action for 4 seconds) Dec 1 13:53:50 andromeda kernel: [ 1102.980003] e1000e: e1000e: eth0 NIC Link is Down Dec 1 13:53:54 andromeda NetworkManager[1115]: <info> (eth0): device state change: activated -> unavailable (reason 'carrier-changed') [100 20 40] Dec 1 13:53:54 andromeda NetworkManager[1115]: <info> (eth0): deactivating device (reason 'carrier-changed') [40] Dec 1 13:53:54 andromeda NetworkManager[1115]: <info> (eth0): canceled DHCP transaction, DHCP client pid 6080 Dec 1 13:53:54 andromeda avahi-daemon[890]: Withdrawing address record for fe80::ea40:f2ff:fee2:4d86 on eth0. Dec 1 13:53:54 andromeda avahi-daemon[890]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::ea40:f2ff:fee2:4d86. Dec 1 13:53:54 andromeda avahi-daemon[890]: Interface eth0.IPv6 no longer relevant for mDNS. Dec 1 13:53:54 andromeda avahi-daemon[890]: Withdrawing address record for 192.168.11.17 on eth0. Dec 1 13:53:54 andromeda avahi-daemon[890]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.11.17. Dec 1 13:53:54 andromeda kernel: [ 1107.025959] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Dec 1 13:53:54 andromeda NetworkManager[1115]: <warn> DNS: plugin dnsmasq update failed Dec 1 13:53:54 andromeda NetworkManager[1115]: <info> ((null)): removing resolv.conf from /sbin/resolvconf Dec 1 13:53:54 andromeda avahi-daemon[890]: Interface eth0.IPv4 no longer relevant for mDNS. Dec 1 13:53:54 andromeda dnsmasq[1907]: setting upstream servers from DBus Dec 1 13:53:54 andromeda dbus[800]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Dec 1 13:53:54 andromeda dbus[800]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> (eth0): carrier now ON (device state 20) Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> (eth0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40] Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Auto-activating connection '82579V'. Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) starting connection '82579V' Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> (eth0): device state change: disconnected -> prepare (reason 'none') [30 40 0] Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled... Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) started... Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) scheduled... Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 1 of 5 (Device Prepare) complete. Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) starting... Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> (eth0): device state change: prepare -> config (reason 'none') [40 50 0] Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) successful. Dec 1 13:54:10 andromeda kernel: [ 1123.167668] e1000e: e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx Dec 1 13:54:10 andromeda kernel: [ 1123.167675] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO Dec 1 13:54:10 andromeda kernel: [ 1123.168430] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled. Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 2 of 5 (Device Configure) complete. Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) started... Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> (eth0): device state change: config -> ip-config (reason 'none') [50 70 0] Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Beginning DHCPv4 transaction (timeout in 45 seconds) Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> dhclient started with pid 6212 Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 3 of 5 (IP Configure Start) complete. Dec 1 13:54:10 andromeda dhclient: Internet Systems Consortium DHCP Client 4.2.4 Dec 1 13:54:10 andromeda dhclient: Copyright 2004-2012 Internet Systems Consortium. Dec 1 13:54:10 andromeda dhclient: All rights reserved. Dec 1 13:54:10 andromeda dhclient: For info, please visit https://www.isc.org/software/dhcp/ Dec 1 13:54:10 andromeda dhclient: Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> (eth0): DHCPv4 state changed nbi -> preinit Dec 1 13:54:10 andromeda dhclient: Listening on LPF/eth0/e8:40:f2:e2:4d:86 Dec 1 13:54:10 andromeda dhclient: Sending on LPF/eth0/e8:40:f2:e2:4d:86 Dec 1 13:54:10 andromeda dhclient: Sending on Socket/fallback Dec 1 13:54:10 andromeda dhclient: DHCPREQUEST of 192.168.11.17 on eth0 to 255.255.255.255 port 67 Dec 1 13:54:10 andromeda dhclient: DHCPACK of 192.168.11.17 from 192.168.11.1 Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> (eth0): DHCPv4 state changed preinit -> reboot Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> address 192.168.11.17 Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> prefix 24 (255.255.255.0) Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> gateway 192.168.11.1 Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> hostname 'andromeda' Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> nameserver '192.168.11.1' Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> domain name 'hsd1.ca.comcast.net' Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Configure Commit) scheduled... Dec 1 13:54:10 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) started... Dec 1 13:54:10 andromeda avahi-daemon[890]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.11.17. Dec 1 13:54:10 andromeda dhclient: bound to 192.168.11.17 -- renewal in 35416 seconds. Dec 1 13:54:10 andromeda avahi-daemon[890]: New relevant interface eth0.IPv4 for mDNS. Dec 1 13:54:10 andromeda avahi-daemon[890]: Registering new address record for 192.168.11.17 on eth0.IPv4. Dec 1 13:54:11 andromeda NetworkManager[1115]: <info> (eth0): device state change: ip-config -> activated (reason 'none') [70 100 0] Dec 1 13:54:11 andromeda NetworkManager[1115]: <info> ((null)): writing resolv.conf to /sbin/resolvconf Dec 1 13:54:11 andromeda dnsmasq[1907]: setting upstream servers from DBus Dec 1 13:54:11 andromeda dnsmasq[1907]: using nameserver 192.168.11.1#53 Dec 1 13:54:11 andromeda NetworkManager[1115]: <info> Policy set '82579V' (eth0) as default for IPv4 routing and DNS. Dec 1 13:54:11 andromeda NetworkManager[1115]: <info> Activation (eth0) successful, device activated. Dec 1 13:54:11 andromeda NetworkManager[1115]: <info> Activation (eth0) Stage 5 of 5 (IPv4 Commit) complete. Dec 1 13:54:11 andromeda dbus[800]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Dec 1 13:54:11 andromeda dbus[800]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Dec 1 13:54:12 andromeda avahi-daemon[890]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::ea40:f2ff:fee2:4d86. Dec 1 13:54:12 andromeda avahi-daemon[890]: New relevant interface eth0.IPv6 for mDNS. Dec 1 13:54:12 andromeda avahi-daemon[890]: Registering new address record for fe80::ea40:f2ff:fee2:4d86 on eth0.*. Dec 1 13:54:19 andromeda ntpdate[6286]: adjust time server 91.189.94.4 offset 0.001142 sec $ lspci -v 00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 04) Subsystem: Intel Corporation Device 2031 Flags: bus master, fast devsel, latency 0, IRQ 45 Memory at f7f00000 (32-bit, non-prefetchable) [size=128K] Memory at f7f39000 (32-bit, non-prefetchable) [size=4K] I/O ports at f040 [size=32] Capabilities: [c8] Power Management version 2 Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [e0] PCI Advanced Features Kernel driver in use: e1000e Kernel modules: e1000e $ modinfo e1000e filename: /lib/modules/3.5.0-19-generic/kernel/drivers/net/e1000e/e1000e.ko version: 2.1.4-NAPI license: GPL description: Intel(R) PRO/1000 Network Driver author: Intel Corporation, <[email protected]> srcversion: 0809529BE0BBC44883956AF alias: pci:v00008086d0000153Bsv*sd*bc*sc*i* alias: pci:v00008086d0000153Asv*sd*bc*sc*i* alias: pci:v00008086d00001503sv*sd*bc*sc*i* alias: pci:v00008086d00001502sv*sd*bc*sc*i* alias: pci:v00008086d000010F0sv*sd*bc*sc*i* alias: pci:v00008086d000010EFsv*sd*bc*sc*i* alias: pci:v00008086d000010EBsv*sd*bc*sc*i* alias: pci:v00008086d000010EAsv*sd*bc*sc*i* alias: pci:v00008086d00001525sv*sd*bc*sc*i* alias: pci:v00008086d000010DFsv*sd*bc*sc*i* alias: pci:v00008086d000010DEsv*sd*bc*sc*i* alias: pci:v00008086d000010CEsv*sd*bc*sc*i* alias: pci:v00008086d000010CDsv*sd*bc*sc*i* alias: pci:v00008086d000010CCsv*sd*bc*sc*i* alias: pci:v00008086d000010CBsv*sd*bc*sc*i* alias: pci:v00008086d000010F5sv*sd*bc*sc*i* alias: pci:v00008086d000010BFsv*sd*bc*sc*i* alias: pci:v00008086d000010E5sv*sd*bc*sc*i* alias: pci:v00008086d0000294Csv*sd*bc*sc*i* alias: pci:v00008086d000010BDsv*sd*bc*sc*i* alias: pci:v00008086d000010C3sv*sd*bc*sc*i* alias: pci:v00008086d000010C2sv*sd*bc*sc*i* alias: pci:v00008086d000010C0sv*sd*bc*sc*i* alias: pci:v00008086d00001501sv*sd*bc*sc*i* alias: pci:v00008086d00001049sv*sd*bc*sc*i* alias: pci:v00008086d0000104Dsv*sd*bc*sc*i* alias: pci:v00008086d0000104Bsv*sd*bc*sc*i* alias: pci:v00008086d0000104Asv*sd*bc*sc*i* alias: pci:v00008086d000010C4sv*sd*bc*sc*i* alias: pci:v00008086d000010C5sv*sd*bc*sc*i* alias: pci:v00008086d0000104Csv*sd*bc*sc*i* alias: pci:v00008086d000010BBsv*sd*bc*sc*i* alias: pci:v00008086d00001098sv*sd*bc*sc*i* alias: pci:v00008086d000010BAsv*sd*bc*sc*i* alias: pci:v00008086d00001096sv*sd*bc*sc*i* alias: pci:v00008086d0000150Csv*sd*bc*sc*i* alias: pci:v00008086d000010F6sv*sd*bc*sc*i* alias: pci:v00008086d000010D3sv*sd*bc*sc*i* alias: pci:v00008086d0000109Asv*sd*bc*sc*i* alias: pci:v00008086d0000108Csv*sd*bc*sc*i* alias: pci:v00008086d0000108Bsv*sd*bc*sc*i* alias: pci:v00008086d0000107Fsv*sd*bc*sc*i* alias: pci:v00008086d0000107Esv*sd*bc*sc*i* alias: pci:v00008086d0000107Dsv*sd*bc*sc*i* alias: pci:v00008086d000010B9sv*sd*bc*sc*i* alias: pci:v00008086d000010D5sv*sd*bc*sc*i* alias: pci:v00008086d000010DAsv*sd*bc*sc*i* alias: pci:v00008086d000010D9sv*sd*bc*sc*i* alias: pci:v00008086d00001060sv*sd*bc*sc*i* alias: pci:v00008086d000010A5sv*sd*bc*sc*i* alias: pci:v00008086d000010BCsv*sd*bc*sc*i* alias: pci:v00008086d000010A4sv*sd*bc*sc*i* alias: pci:v00008086d0000105Fsv*sd*bc*sc*i* alias: pci:v00008086d0000105Esv*sd*bc*sc*i* depends: vermagic: 3.5.0-19-generic SMP mod_unload modversions parm: copybreak:Maximum size of packet that is copied to a new buffer on receive (uint) parm: TxIntDelay:Transmit Interrupt Delay (array of int) parm: TxAbsIntDelay:Transmit Absolute Interrupt Delay (array of int) parm: RxIntDelay:Receive Interrupt Delay (array of int) parm: RxAbsIntDelay:Receive Absolute Interrupt Delay (array of int) parm: InterruptThrottleRate:Interrupt Throttling Rate (array of int) parm: IntMode:Interrupt Mode (array of int) parm: SmartPowerDownEnable:Enable PHY smart power down (array of int) parm: KumeranLockLoss:Enable Kumeran lock loss workaround (array of int) parm: CrcStripping:Enable CRC Stripping, disable if your BMC needs the CRC (array of int) parm: EEE:Enable/disable on parts that support the feature (array of int) parm: Node:[ROUTING] Node to allocate memory on, default -1 (array of int) parm: debug:Debug level (0=none,...,16=all) (int)

Read the article

Change Tracking

- by Ricardo Peres

You may recall my last post on Change Data Control. This time I am going to talk about other option for tracking changes to tables on SQL Server: Change Tracking. The main differences between the two are: Change Tracking works with SQL Server 2008 Express Change Tracking does not require SQL Server Agent to be running Change Tracking does not keep the old values in case of an UPDATE or DELETE Change Data Capture uses an asynchronous process, so there is no overhead on each operation Change Data Capture requires more storage and processing Here's some code that illustrates it's usage: -- for demonstrative purposes, table Post of database Blog only contains two columns, PostId and Title -- enable change tracking for database Blog, for 2 days ALTER DATABASE Blog SET CHANGE_TRACKING = ON (CHANGE_RETENTION = 2 DAYS, AUTO_CLEANUP = ON); -- enable change tracking for table Post ALTER TABLE Post ENABLE CHANGE_TRACKING WITH (TRACK_COLUMNS_UPDATED = ON); -- see current records on table Post SELECT * FROM Post SELECT * FROM sys.sysobjects WHERE name = 'Post' SELECT * FROM sys.sysdatabases WHERE name = 'Blog' -- confirm that table Post and database Blog are being change tracked SELECT * FROM sys.change_tracking_tables SELECT * FROM sys.change_tracking_databases -- see current version for table Post SELECT p.PostId, p.Title, c.SYS_CHANGE_VERSION, c.SYS_CHANGE_CONTEXT FROM Post AS p CROSS APPLY CHANGETABLE(VERSION Post, (PostId), (p.PostId)) AS c; -- update post UPDATE Post SET Title = 'First Post Title Changed' WHERE Title = 'First Post Title'; -- see current version for table Post SELECT p.PostId, p.Title, c.SYS_CHANGE_VERSION, c.SYS_CHANGE_CONTEXT FROM Post AS p CROSS APPLY CHANGETABLE(VERSION Post, (PostId), (p.PostId)) AS c; -- see changes since version 0 (initial) SELECT p.Title, c.PostId, SYS_CHANGE_VERSION, SYS_CHANGE_OPERATION, SYS_CHANGE_COLUMNS, SYS_CHANGE_CONTEXT FROM CHANGETABLE(CHANGES Post, 0) AS c LEFT OUTER JOIN Post AS p ON p.PostId = c.PostId; -- is column Title of table Post changed since version 0? SELECT CHANGE_TRACKING_IS_COLUMN_IN_MASK(COLUMNPROPERTY(OBJECT_ID('Post'), 'Title', 'ColumnId'), (SELECT SYS_CHANGE_COLUMNS FROM CHANGETABLE(CHANGES Post, 0) AS c)) -- get current version SELECT CHANGE_TRACKING_CURRENT_VERSION() -- disable change tracking for table Post ALTER TABLE Post DISABLE CHANGE_TRACKING; -- disable change tracking for database Blog ALTER DATABASE Blog SET CHANGE_TRACKING = OFF; You can read about the differences between the two options here. Choose the one that best suits your needs! SyntaxHighlighter.config.clipboardSwf = 'http://alexgorbatchev.com/pub/sh/2.0.320/scripts/clipboard.swf'; SyntaxHighlighter.brushes.CSharp.aliases = ['c#', 'c-sharp', 'csharp']; SyntaxHighlighter.brushes.Xml.aliases = ['xml']; SyntaxHighlighter.all();

Read the article

Up in the Air: Team Oracle Play-by-Play

- by Aaron Lazenby

Yesterday, I had the amazing opportunity to fly along with Sean D. Tucker and Team Oracle. Leaving from the San Carols airport, we did a 30 minute flight over the Pacific just south of the coastal town of Half Moon Bay. In that half hour, I rode through a massive 4G loop, survived a crushing hammerhead, and took control of the plane to perform a basic wing over (you can learn what the heck I'm talking about by visiting this website). I have lots of great video, but it's going to take me some time to make sense of it. For now, here's my Twitter-based play-by-play of yesterday's events. Many thanks to Sean D. Tucker and the whole crew (Ben and Ian, especially) for this great opportunity to fly with Team Oracle.Live tweets from @OracleProfitI will be spending the afternoon in a stunt plane, upside down above the San Francisco bay. http://bit.ly/cwkrkIAt the San Carlos airport. More than slightly freaked out. Shaking hands diminish texting ability. Slightly reassuring. http://yfrog.com/1qt61nj There go the doors to the photo plane... #teamoracle http://yfrog.com/58ywljSean D Tucker assures me: "The sky is a great place to be." Helpful, but I'm still nervous. #teamoracle"You get a parachute. He gets a harness." How was this decision made? #teamoracleThe plane with @radu43 has returned. I'm up next...Couldn't help myself...drank a soda before flying. Mistake? We'll see... #teamoracleAdvice of the day "If you pull with two hands, you improve the chances of the chute deploying on the first try." Lovely. #teamoracleI feel so strange. But I flew a high performance airplane. And did an aerobatics move. Wild. #teamoracle"Flying ten feet off he ground, upside-down at 250 miles per hour isn't exciting to me." Sean D. Tucker #teamoracle"What is exciting to me is flying that perfect pattern, just like I imagined it in my head." Sean D. Tucker #teamoracle"You're going to sleep well tonight. You just carried four times your body weight." #teamoracle #gforce Just watched the #teamoracle plane take off for its flight home. I'm waiting for Caltrain. #undignifiedanticlimaxEnough with the #teamoracle. Check http://blogs.oracle.com/profit for the video. Coming soon!

Read the article

Silverlight Cream for April 17, 2010 -- #839

- by Dave Campbell

In this Issue: ITLackey, SilverLaw, Max Paulousky, Alex Yakhnin, Paul Sheriff, Douglas, Jeremy Likness, Tomasz Janczuk, Anoop Madhusudanan, Adam Kinney, and Ashish Shetty. Shoutout: If you haven't already seen it, CrocusGirl did a great job of summarizing Day 2 of DevConnections with her Silverlight 4 Launch Notes From SilverlightCream.com: RIA Services - IIS6 Virtual Directory Deployment ITLackey has a post up building on his previous post on Windows Authentication with RIA Services and discusses deploying to an IIS Virtual Directory. How To: Determine ChildWindow Position At Runtime - Silverlight 3 SilverLaw has a post up about determining the position of a ChildWindow at run-time, for example after the user moves it. Modularity in Silverlight Applications - An Issue With ModuleInitializeException – Part 2 Max Paulousky has part 2 of his series up on Modularity in Silverlight... he discusses using XAML as a catalog and registering modules at runtime, and compares to WPF. Creating LINQ Data Provider for WP7 (Part 1) Alex Yakhnin has a first cut at a LINQ Data Provider for WP7 ... I was expecting this to hit pretty soon, because we're all going to want it... check out the code and d/l the project. Synchronize Data between a Silverlight ListBox and a User Control Paul Sheriff demonstrates databinding in XAML between local data in a ListBox and a UserControl. The beginnings of Silverlight development with Expression Blend Douglas has a good post up on beginning your Silverlight development with Expression Blend. He covers a lot of ground in this post. Converting Silverlight 3 to Silverlight 4 Jeremy Likness has a video up demonstrating converting Silverlight 3 to Silverlight 4 with download links and also using commanding on buttons. Debugging WCF RIA Services with WCF traces Tomasz Janczuk has a post up discussing the use of WCF RIA Services traces to help diagnose and debug problems in a deployed service. Bing Maps + oData + Windows Phone 7 - Nerd Dinner Client For Windows Phone 7 Check out what Anoop Madhusudanan has provided... Nerd Dinner for WP7, including OData and BingMaps... just very cool! A few cool new features added in Expression Blend 4 RC Adam Kinney announced the availability of the new Expression Blend and highlights some of the new features... like MakeLayoutPath... FTW! Of Crashing and Sometimes Burning Ashish Shetty has a discourse posted about where the causes of errors might come from, what to expect from the platform, where to find crash dumps, and links to more reading. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight Silverlight 3 Silverlight 4 Windows Phone MIX10

Read the article

A Small Utility to Delete Files recursively by Date

- by Rick Strahl

It's funny, but for me the following seems to be a recurring theme: Every few months or years I end up with a host of files on my server that need pruning selectively and often under program control. Today I realized that my SQL Server logs on my server were really piling up and nearly ran my backup drive out of drive space. So occasionally I need to check on that server drive and clean out files. Now with a bit of work this can be done with PowerShell or even a complicated DOS batch file, but heck, to me it's always easier to just create a small Console application that handles this sort of thing with a full command line parser and a few extra options, plus in the end I end up with code that I can actually modify and add features to as is invariably the case. No more searching for a script each time :-) So for my typical copy needs the requirements are: Need to recursively delete files Need to be able to specify a filespec (ie. *.bak) Be able to specify a cut off date before which to delete files And it'd be nice to have an option to send files to the Recycle bin just in case for operator error :-)(and yes that came in handy as I blew away my entire database backup folder by accident - oops!) The end result is a small Console file copy utility that I popped up on Github: https://github.com/RickStrahl/DeleteFiles The source code is up there along with the binary file you can just run. Creating DeleteFiles It's pretty easy to create a simple utility like DeleteFiles of course, so I'm not going to spend any talking about how it works. You can check it out in the repository or download and compile it. The nice thing about using a full programming language like C over something like PowerShell or batch file is that you can make short work of the recursive tree walking that's required to make this work. There's very little code, but there's also a very small, self-contained command line parser in there that might be useful that can be plugged into any project - I've been using it quite a bit for just about any Console application I've been building. If you're like me and don't have the patience or the persistence (that funky syntax requires some 'sticking with it' that I simply can't get over) to get into Powershell coding, having an executable file that I can just copy around or keep in my Utility directory is the only way I'll ever get to reuse this functionality without going on a wild search each time :-) Anyway, hope some of you might find this useful. © Rick Strahl, West Wind Technologies, 2005-2012Posted in Windows CSharp Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

How to Customize Your How-To Geek RSS Feeds (We’re Changing Things)

- by The Geek

If you’re an RSS subscriber, you’ll soon notice that we’re making a few changes. Why? It’s time to simplify our system, while providing you a little more control over which articles you want to see. The point, of course, is that people like different things, and that’s OK. What’s not so great is getting complaints—Linux users are always whining about Windows posts, and Windows users are whining when we write Linux posts. It’s also worth pointing out that if you aren’t interested in a post—you don’t have to click on it to read it. This is probably fairly obvious to reasonable people. The New Feeds Here’s the new set of feeds you can subscribe to. We’ll probably add more fine-grained feeds in the future, as we get some more things straightened out. Everything we publish (news, how-tos, features) Just the Feature Articles (the absolute best stuff) Just News (ETC) Posts Just Windows Articles Just Linux Articles Just Apple Articles Just Desktop Fun Articles You can obviously subscribe to one or many of them if you feel like it. The Once Daily Summary Feed! If you’d rather get all your How-To Geek in a single dose each day, you can subscribe to the summary feed, which is pretty much the same as our daily email newsletter. You can subscribe to this summary feed by clicking here. Note: we’re working on a lot of backend changes to hopefully make things a little better for you, the reader. One of the things we’ve consistently had feedback on is the comment system, which we’ll tackle a little later. Also, if you suddenly saw a barrage of posts earlier… oops! Our mistake. Latest Features How-To Geek ETC Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide CyanogenMod Updates; Rolls out Android 2.3 to the Less Fortunate MyPaint is an Open-Source Graphics App for Digital Painters Can the Birds and Pigs Really Be Friends in the End? [Angry Birds Video] Add the 2D Version of the New Unity Interface to Ubuntu 10.10 and 11.04 MightyMintyBoost Is a 3-in-1 Gadget Charger Watson Ties Against Human Jeopardy Opponents

Read the article

Java Spotlight Episode 58: Peter Korn and Ofir Leitner on ME Accessibility

- by Roger Brinkley

Tweet Interview with Peter Korn and Ofir Leitner on Mobile and Embedded Accessibility. Joining us this week on the Java All Star Developer Panel are Dalibor Topic, Java Free and Open Source Software Ambassador and Alexis Moussine-Pouchkine, Java EE Developer Advocate. Right-click or Control-click to download this MP3 file. You can also subscribe to the Java Spotlight Podcast Feed to get the latest podcast automatically. If you use iTunes you can open iTunes and subscribe with this link: Java Spotlight Podcast in iTunes. Show Notes News Announcing Oracle WebLogic 12c Geronimo 3 beta - Another Apache project now compatible with Java EE 6 NetBeans 7.1 RC1 is out JavaFX links of the weeks JavaFX videos on Parleys: Nicolas Lorain's Introduction to JavaFX 2.0 from JavaOne 2011 & Richard Bair on JavaFX Architecture and Programming Model Events Dec 4, SOUJava Geek Bike Ride 2011, Sao Paulo Dec 5-7, UKOUG, Birmingham, UK Dec 6-8, Java One Brazil, Sao Paulo Dec 9 UAIJUG, Uberlandia Dec 9 CEJUG, Fortaleza/CE Dec 10 GUJAVA, Florianopolis Dec 10 ALJUG, Maceio/AL Dec 11 Javaneiros, Campo Grande/MS Dec 12 GOJAVA, Goiania/GO Dec 13 RioJUG, Rio de Janeiro Feature interview Peter Korn is Oracle's Accessibility Principal – their senior individual contributor on accessibility. He is also Technical Manager of the AEGIS project, leading an EC-funded €12.6m investment building accessibility into future mainstream ICT (FP7-ICT224348). Mr. Korn co-developed and co-implemented the Java Accessibility API, and developed the Java Access Bridge for Windows. He helped design the open source GNOME Accessibility architecture found on most modern UNIX and GNU/Linux systems, and consulted on accessibility support for OpenOffice.org, Firefox, Thunderbird, and other applications. Prior to Sun/Oracle, Peter co-developed the outSPOKEN for Windows screen reader. Mr. Korn represented Sun/Oracle on TEITAC for the Section 508/255 refresh, co-led the OASIS ODF Accessibility subcommittee, and sits on INCITS V2 where he is contributing to ISO 13066: defining AT-IT interoperability standards including specifically the Java Accessibility API. Ofir Leitner is the architect of one of LWUIT's key features - the HTMLComponent which allows rendering HTML within LWUIT applications and to embed web-flows inside apps. Ofir is also responsible for LWUIT's bidirectional and RTL support and for the accessibility work that is being done these days in LWUIT. Mail Bag What's Cool Devoxx 2011 (Alexis) Eclipsecon Europe Talk by Andrew Overholt: IcedTea & IcedTea-Web Geek bike ride & Rio 500 Twitter followers @JavaSpotlight Show Transcripts Transcript for this show is available here when available.

Read the article

Windows Azure Use Case: Infrastructure Limits

- by BuckWoody

This is one in a series of posts on when and where to use a distributed architecture design in your organization's computing needs. You can find the main post here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx Description: Physical hardware components take up room, use electricity, create heat and therefore need cooling, and require wiring and special storage units. all of these requirements cost money to rent at a data-center or to build out at a local facility. In some cases, this can be a catalyst for evaluating options to remove this infrastructure requirement entirely by moving to a distributed computing environment. Implementation: There are three main options for moving to a distributed computing environment. Infrastructure as a Service (IaaS) The first option is simply to virtualize the current hardware and move the VM’s to a provider. You can do this with Microsoft’s Hyper-V product or other software, build the systems and host them locally on fewer physical machines. This is a good option for canned-applications (where you have to type setup.exe) but not as useful for custom applications, as you still have to license and patch those servers, and there are hard limits on the VM sizes. Software as a Service (SaaS) If there is already software available that does what you need, it may make sense to simply purchase not only the software license but the use of it on the vendor’s servers. Microsoft’s Exchange Online is an example of simply using an offering from a vendor on their servers. If you do not need a great deal of customization, have no interest in owning or extending the source code, and need to implement a solution quickly, this is a good choice. Platform as a Service (PaaS) If you do need to write software for your environment, your next choice is a Platform as a Service such as Windows Azure. In this case you no longer manager physical or even virtual servers. You start at the code and data level of control and responsibility, and your focus is more on the design and maintenance of the application itself. In this case you own the source code and can extend or change it as you see fit. An interesting side-benefit to using Windows Azure as a PaaS is that the Application Fabric component allows a hybrid approach, which gives you a basis to allow on-premise applications to leverage distributed computing paradigms. No one solution fits every situation. It’s common to see organizations pick a mixture of on-premise, IaaS, SaaS and PaaS components. In fact, that’s a great advantage to this form of computing - choice. References: 5 Enterprise steps for adopting a Platform as a Service: http://blogs.msdn.com/b/davidmcg/archive/2010/12/02/5-enterprise-steps-for-adopting-a-platform-as-a-service.aspx?wa=wsignin1.0 Application Patterns for the Cloud: http://blogs.msdn.com/b/kashif/archive/2010/08/07/application-patterns-for-the-cloud.aspx

Search Results

Search found 19856 results on 795 pages for 'inversion of control'.

Page 623/795 | < Previous Page | 619 620 621 622 623 624 625 626 627 628 629 630 | Next Page >

- by [email protected]

- by David Allan

- by Ali Bahrami

- by kaleidoscope

- by David Dorf

- by jean-pierre.dijcks

- by imran_ku07

- by Sahil Malik

- by Dave Campbell

- by Roger Brinkley

- by Tony Davis

- by Mason Wheeler

- by Dave Campbell

- by jasmines

- by BizTalk Visionary

- by Anand Akela

- by plitwin

- by user112055

- by Ricardo Peres

- by Aaron Lazenby

- by Dave Campbell

- by Rick Strahl

- by The Geek

- by Roger Brinkley

- by BuckWoody

< Previous Page | 619 620 621 622 623 624 625 626 627 628 629 630 | Next Page >