Search Results

Search found 19377 results on 776 pages for 'el key'.

Page 624/776 | < Previous Page | 620 621 622 623 624 625 626 627 628 629 630 631  | Next Page >

• Windows PE network setup

  - by microchasm

  I'm walking through the following step-by-step guide for deploying Windows 7 via AIK: http://technet.microsoft.com/en-us/library/dd349348%28WS.10%29.aspx On step 4 (Capturing the Installation onto a Network Share), I run into a bit of a snag: attempting to connect to a network drive repeatedly fails. I'm using/deploying Dell Optiplex 380 64 bit machines, and the network cards seem to be really wonky. On the machine that I'm using to run AIK etc, the network driver wasn't found automatically. I had to manually go in and install the driver (which was found on the OEM installation media). I've since copied this to the USB key that I'm using for the Autounattend.xml so its handy. I think that because of this, the PE environment doesn't or can't instantiate the network device. Is there a way to install/configure the network device through the command prompt in PE? If not, I read about adding in the answer file path(s) to drivers, but if I did it this way, would I have to start the process all over again (i.e. create new Autounattend.xml with the PnPcustomizations path included, re-run the installation on the reference machine, install all the applications, re-make the PE iso, reboot into new PE iso)? Any shortcuts, direction, or advice would be appreciated. Thanks!

  Read the article

• Change authentication wifi WPA to WEP on Windows 8

  - by Kites

  I use netsh wlan set hostednetwork mode=allow ssid=Kites key=phambaoViet netsh wlan start hostednetwork To share WiFi from LAN network on laptop (Windows 8) to my other device. When I show information netsh wlan show hostednetwork the supported authentication is WPA. My device support authentication WEP only. How can I change the authentication to WEP? Infomation: Interface name: Wi-Fi Driver : Qualcomm Atheros AR9002WB-1NG Wireless Network A dapter Vendor : Qualcomm Atheros Communications Inc. Provider : Microsoft Date : 03/07/2012 Version : 3.0.0.130 INF file : C:\Windows\INF\netathrx.inf Files : 2 total C:\Windows\system32\DRIVERS\athrx.sys C:\Windows\system32\drivers\vwifibus.sys Type : Native Wi-Fi Driver Radio types supported : 802.11b 802.11g 802.11n FIPS 140-2 mode supported : Yes 802.11w Management Frame Protection supported : Yes Hosted network supported : Yes Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Open WEP-104bit Open WEP WPA-Enterprise TKIP WPA-Personal TKIP WPA2-Enterprise TKIP WPA2-Personal TKIP Vendor defined TKIP WPA2-Enterprise Vendor defined Vendor defined Vendor defined WPA-Enterprise CCMP WPA-Personal CCMP WPA2-Enterprise CCMP Vendor defined CCMP WPA2-Enterprise Vendor defined Vendor defined Vendor defined WPA2-Personal CCMP Vendor defined Vendor defined Authentication and cipher supported in ad-hoc mode: Open None Open WEP-40bit Open WEP-104bit Open WEP WPA2-Personal CCMP Vendor defined Vendor defined

  Read the article

• Make isolinux 4.0.3 chainload itself

  - by chainloader

  I have a bootable iso which boots into isolinux 4.0.3 and I want to make it chainload itself (my actual goal is to chainload isolinux.bin v4.0.1-debian, which should start up the Ubuntu10.10 Live CD, but for now I just want to make it chainload itself). I can't get isolinux to chainload any isolinux.bin, no matter what version. It either freezes or shows a "checksum error" message. I'm using VMWare to test the iso. Things I have tried: .com32 /boot/isolinux/chain.c32 /boot/isolinux/isolinux-debug.bin (chainload self) this shows Loading the boot file... Booting... ISOLINUX 4.03 2010-10-22 Copyright (C) 1994-2010 H. Peter Anvin et al isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK, drive = 9F isolinux: Main image LBA = 53F00100 ...and the machine freezes. Then I've tried this (chainload GRUB4DOS 0.4.5b) chainloader /boot/isolinux/isolinux-debug.bin Result: Error 13: Invalid or unsupported executable format Next try: (chainload GRUB4DOS 0.4.5b) chainloader --force /boot/isolinux/isolinux-debug.bin boot Result: ISOLINUX 4.03 2010-10-22 Copyright (C) 1994-2010 H. Peter Anvin et al isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK, drive = 9F isolinux: No boot info table, assuming single session disk... isolinux: Spec packet missing LBA information, trying to wing it... isolinux: Main image LBA = 00000686 isolinux: Image checksum error, sorry... Boot failed: press a key to retry... I have tried other things, but all of them failed miserably. Any suggestions?

  Read the article

• Windows XP over two monitors, but one of them switches off at boot... how to fix? How to switch bac

  - by jae

  When booting into XP (x64, Athlon II X2 245, 4GB RAM), my main monitor (got two 19" TFTs hooked up, two gfx cards, a 4650 (1GB, the primary monitor's on this) and a 4350 (512MB)) switches off. Logging in blind (cursor down key, typing password) gets me one screen, the secondary. Booted correctly until about two days ago. No clue what's the cause, last change was (if I don't overlook something) installing the ATI 9-12 hotfix. And booting into Windows 7, after returning from 7, it was like this. For some weird reason, I cannot start Catalyst Control Center (I right-click desktop, choose the CCC entry, the pointer changes to hourglass for a half-second... and nothing. Likewise with "Properties"... I think, as all windows open on the primary (off) screen, and no entry appears in the task bar for Properties) Completely stumped. Windows 7, same setup, works w/o a hitch. The primary monitor appears to run in some unknown, but pretty low, resolution, as the mouse pointer only moves onto it at about half-height. But, w/o CCC or display properties, I cannot check. And, obviously, not change anything. Hope this was not too long-winded. And I'm sure I still forgot essential stuff. :P

  Read the article

• Measure Total Bandwidth for Billing

  - by TonyZ

  I am setting up a new network which customers will host their applications on. It needs to be able to scale out to a few hundred servers and each server will have several VMs on it. Right now in my test environment, after the telco router, we are using a Linux router/firewall which is then connected to a Layer 2 switch. Could be a layer 3 in the future. I need to track total bandwidth per VM for each machine, and I need to do it in a way that it is not part of the VM. Each VM will have a private class ip address which is Natted by the gateway, or we may eventually run more than firewall/reverse proxy off a layer 3 switch. So my thinking is that I can do it off of a promiscuous port on the switches, or at the gateway firewall. I would like to have an out of the box solution, preferably open source. Does anyone have suggestions on the easiest way to set this up, and the easiest tool to use. I have looked at the web sites for Nagios, Zenoss, Zabbix, ntops on the firewall, etc. It is hard to ascertain just from the web sites if they do exactly this or not. Obviously, performance is also somewhat key here. Anything running on the gateway should not drag it down doing traffic accounting. Thanks for any thoughts. Tony Zakula

  Read the article

• Redmine plug-in fails at rake db:migrate_plugins

  - by Drew

  Hey, First post, so hope I'm in the right place. While trying to install the Redmine plug-in 'Wiki Extensions', I keep getting stuck when I try to run the "rake db:migrate_plugins RAILS_ENV=production" command. I am moving server and I'm in bit over my head. Haven't found anything on Google that has helped me much, though I might have missed something. I have pasted in the output with --trace: (in /srv/www/vastpark.org/redmine) ** Invoke db:migrate_plugins (first_time) ** Invoke environment (first_time) ** Execute environment ** Execute db:migrate_plugins Migrating engines... Migrating acts_as_activity_provider... Migrating acts_as_attachable... Migrating acts_as_customizable... Migrating acts_as_event... Migrating acts_as_list... Migrating acts_as_searchable... Migrating acts_as_tree... Migrating acts_as_versioned... Migrating acts_as_watchable... Migrating awesome_nested_set... Migrating classic_pagination... Migrating coderay-0.9.2... Migrating gravatar... Migrating open_id_authentication... Migrating prepend_engine_views... Migrating redmine_wiki_extensions... == CreateWikiExtensionsComments: migrating =================================== -- create_table(:wiki_extensions_comments) rake aborted! An error has occurred, all later migrations canceled: Mysql::Error: Table 'wiki_extensions_comments' already exists: CREATE TABLE 'wiki_extensions_comments' ('id' int(11) DEFAULT NULL auto_increment PRIMARY KEY, 'wiki_page_id' int(11), 'key_word' varchar(255), 'user_id' int(11), 'comment' text, 'created_at' datetime, 'updated_at' datetime) ENGINE=InnoDB

  Read the article

• Mac creating files w/ wrong perms on samba share

  - by geoffjentry

  In my group, which is very heterogeneous in terms of machines, we use a samba share to collaborate on files and such. In all but one case, it works as expected (or at least close enough). The one exception is my boss' laptop, a snow leopard macbook air. On his desktop (also snow leopard), if he creates a file it ends up serverside with perms of 774, but when he creates it with the Air, the perms are 644. The key problem is the lack of group write permission on the laptop created files. What's really confusing is that everything that I've looked at on the two machines are identical - same version of OS X, same version of samba (3.0.25b-apple), same settings for the same software, etc. I can't imagine why one machine would be different than the other, but it is. To try to be complete w/ the description, here is the relevant portion of my smb.conf file: comment = my Share path = /path/to/share public = no writeable = yes printable = no force group = myshare directory mask = 0770 create mask = 0770 force create mode = 0770 force directory mode = 0770 EDIT: I looked at three more Macs and all of them worked as expected which leaves this one laptop the true oddball. This wasn't as good as a test as the others though, as they were all leopard.

  Read the article

• Postfix (delivery temporarily suspended: conversation with mydomain.net [private/lmtp] timed out while receiving the initial server greeting)

  - by Paul

  I'm running Debian 7.1, Postfix version 2.9.6, Dovecot Version 2.1.7 To set it up I followed mostly this (without the spamass-clamav-greylist bit) I have also got setup smart host relaying via gmail postconf -n reveals: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all inet_protocols = ipv4 mailbox_size_limit = 0 milter_default_action = accept mydestination = MyDomain, localhost.net, localhost myhostname = MyDomain.net mynetworks = 127.0.0.0/8 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relay_domains = mysql:/etc/postfix/mysql_relay_domains.cf relayhost = [smtp.gmail.com]:587 smtp_connect_timeout = 120s smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/relay_passwd smtp_sasl_security_options = noanonymous smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_hostname, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unauth_destination, reject_unauth_pipelining, reject_invalid_hostname smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes virtual_alias_maps = mysql:/etc/postfix/mysql_virtual_alias_maps.cf virtual_gid_maps = static:3000 virtual_mailbox_base = /home/vmail virtual_mailbox_domains = mysql:/etc/postfix/mysql_virtual_mailbox_domains.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql_virtual_mailbox_maps.cf virtual_transport = lmtp:unix:private/lmtp virtual_uid_maps = static:3000 I am able to send emails to the outside world but all emails sent to me are getting stuck. mailq is showing numerous lines: A69C2414C4 2621 Fri Dec 27 14:57:03 [email protected] (conversation with MyDomain.net[private/lmtp] timed out while receiving the initial server greeting) [email protected] AB78B414BE 3796 Fri Dec 27 14:56:50 [email protected] (delivery temporarily suspended: conversation with MyDomain.net[private/lmtp] timed out while receiving the initial server greeting) [email protected] /var/log/mail.log is showing: Dec 28 09:50:09 hostname postfix/lmtp[10828]: E947C414CD: to=, relay=localhost[private/lmtp], delay=64012, delays=63712/0.25/300/0, dsn=4.4.2, status=deferred (conversation with localhost[private/lmtp] timed out while receiving the initial server greeting) Any help would be greatly appreciated. Thank you

  Read the article

• System freezes during boot process

  - by slugster

  Hi everyone, i have a machine running Win7 Ultimate. It was running fine, then it just froze - all the stuff i was doing was still on the screen, but mouse and keyboard input was ignored, any animation that was happening on the screen stopped, the machine literally just froze. So i rebooted (power off button), from then on the machine will reboot, but it ultimately freezes again. The instance when this happens will vary - i have made it as far as the Windows login screen, but mostly it will do the POST, then give me the option to press F1 to continue or Del to enter BIOS settings (but of course pressing a key has no effect - it's frozen!). I have disconnected everything not necessary for the boot process, the only peripheral that remains attached is the keyboard. (even the network cable is disconnected). Prior to this the machine was operating fine. The install of Win7 is only 2 days old, and it was a fresh reinstall (i.e. not an upgrade or repair). Can anyone give me an indication of what may be wrong here? I'm not sure if this question should be here or on SuperUser, please migrate it if i have chosen the wrong board.

  Read the article

• Debian DNSSEC - howto secure a domain?

  - by Daniel Marschall

  I have a beginner question about DNSSEC. I have much experience with TLS and cryptography-stuff and would like to try out this new technology. I have googled very much about this but I haven't found useful information for me. I think one confusion in information gathering is that "Debian howto DNSSEC setup" can mean "How to USE DNSSEC for resolving" OR "How to secure your domain with DNSSEC". I am searching the second. I am running a Debian Squeeze server with root privileges which has a domain name ending with ".de" (which is already signed by the root zone). The network interface at this server uses the gateway IP (DNS resolver?) of the datacentre the server is running on. My domain is hosted at freedns.afraid.org , where I can add DNS RRs for my domain. They are currently NOT capable of adding DNSSEC RRs, but I am bugging them to support this soon. ;-) My simple question is: How do I setup DNSSEC on Debian? Resp. who have I ask to? As far as I understand, all I have to do is to run dnssec-keygen on my Debian server and then add the key to my DNS-provider as DNSSEC RR. (And change it every 30 days?) I have looked at this http://www.isc.org/files/DNSSEC_in_6_minutes.pdf but it looks like you have to be the owner of a ZONE, so I don't think this applies to me. Who needs to sign my domain? My DNS-provider or my zone (DeNIC) or can I do it myself? Any help is very appreciated!

  Read the article

• Getting some French-Canadian keyboard strokes to work on English keyboard

  - by Gradient

  I'm trying to use some of the French-Canadian keyboard stokes I'm used to on an English keyboard. I would like to change the behaviour of some keys. I was able to implement these changes in Vim, but I would like them to be applied system-wide (for Windows and Ubuntu). Here's what I want to implement : If I press [a, the character printed is â. When I press [r, something that's supposed to stay normal, the characters printed are [r. If I hold [ for 3 seconds, [ is printed. I want this delay to be applied to all my modified keys. I want to map < to ' and the characters 'e to è. The complex problem here is that I only want the ' beside the ; key to produce the è character, NOT when I press the < (remapped to ') then e. I'll show you a .vimrc file that implements this, now I want this behavior system-wide: set timeout timeoutlen=3000 ttimeoutlen=100 inoremap [a â inoremap [A Â inoremap [e ê inoremap [E Ê inoremap [i î inoremap [I Î inoremap [o ô inoremap [O Ô inoremap [u û inoremap [U Û inoremap 'a à inoremap 'A À inoremap 'e è inoremap 'E È inoremap 'u ù inoremap 'U Ù inoremap }e ë inoremap }E Ë inoremap }i ï inoremap }I Ï inoremap }u ü inoremap }U Ü inoremap ]c ç inoremap ]C Ç inoremap / é inoremap < '

  Read the article

• Cisco ASA dropping IPsec VPN between istself and CentOS server

  - by sebelk

  Currently we're trying to set up an IPsec VPN between a Cisco ASA Version 8.0(4) and a CentOS Linux server. The tunnel comes up successfully, but for some reason that we can't figure out, the firewall is dropping packets from the VPN. The IPsec settings in the ASA sre as follows: crypto ipsec transform-set up-transform-set esp-3des esp-md5-hmac crypto ipsec transform-set up-transform-set2 esp-3des esp-sha-hmac crypto ipsec transform-set up-transform-set3 esp-aes esp-md5-hmac crypto ipsec transform-set up-transform-set4 esp-aes esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto map linuxserver 10 match address filtro-encrypt-linuxserver crypto map linuxserver 10 set peer linuxserver crypto map linuxserver 10 set transform-set up-transform-set2 up-transform-set3 up-transform-set4 crypto map linuxserver 10 set security-association lifetime seconds 28800 crypto map linuxserver 10 set security-association lifetime kilobytes 4608000 crypto map linuxserver interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption aes hash sha group 2 lifetime 28800 crypto isakmp policy 2 authentication pre-share encryption aes-256 hash sha group 2 lifetime 86400 crypto isakmp policy 3 authentication pre-share encryption aes-256 hash md5 group 2 lifetime 86400 crypto isakmp policy 4 authentication pre-share encryption aes-192 hash sha group 2 lifetime 86400 crypto isakmp policy 5 authentication pre-share encryption aes-192 hash md5 group 2 group-policy linuxserverip internal group-policy linuxserverip attributes vpn-filter value filtro-linuxserverip tunnel-group linuxserverip type ipsec-l2l tunnel-group linuxserverip general-attributes default-group-policy linuxserverip tunnel-group linuxserverip ipsec-attributes pre-shared-key * Does anyone know where the problem is and how to fix it?

  Read the article

• Textmate add multiline text at end of line

  - by Yuval

  In Textmate, I am able to add text to several lines at once by clicking and holding the Option key and dragging with the mouse. say I have the following lines: foo 1: foo 2: foo 3: I can easily click and hold option and then drag down with the lines to select the text at the end of each line, and then type "bar" once and it will be added to all lines, as such: foo 1: bar foo 2: bar foo 3: bar Fantastic. The problem I run into, is when my lines aren't the same length, as such foo 19: foo 37842342346: foo 503: Now if I want to add text to the end of each line, I have to either do it manually, or choose enough space so that the longest line is not overwritten, as such: foo 19: bar foo 37842342346: bar foo 503: bar This results in a lot of unwanted whitespace in lines that don't need it. Granted, I could easily run a regular expression search to replace all multiple occurrences of a space with a single one, but I was wondering if there's a way to select all ending of lines at once without having to do that. Any idea? Thanks!

  Read the article

• /dev/input/uinput Device appears to be 'broken'

  - by Adam Luchjenbroers

  I'm trying to setup Pystromo so that I can remap the keys on my Belkin N52TE gamepad. Pystromo basically captures the key strokes and then outputs the remapped keystrokes to the uinput device. However, at the moment it simply swallows the input and outputs absolutely nothing. I've tracked the issue to something being wrong with my uinput device, with the smoking gun being: # ls -l /dev/input/uinput crw-rw---- 1 root plugdev 10, 223 Dec 31 2009 /dev/input/uinput # cat /dev/input/uinput cat: /dev/input/uinput: No such device The uinput module is loaded, and can be clearly seen via lsmod. Anyone seen this before, or can think of something worth attempting? Current Setup Gentoo Linux Kernel 2.6.32 (Gentoo Sources 2.6.32-r1) HP DV7 Laptop Output dmesg dmesg | grep uinput does nothing, and no new lines appear if I run modprobe -r uinput && modprobe uinput. Yet the uinput module can clearly be seen when running lsmod: # lsmod | grep uinput uinput 6200 0 lsusb # lsusb Bus 005 Device 003: ID 050d:0200 Belkin Components Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 1532:0101 Razer USA, Ltd Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 5986:0143 Acer, Inc Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module] Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub lsusb -v PasteBin Update Hmm, updating evdev and hal seems to have partially fixed it. /dev/input/uinput still can't be accessed but Pystromo is now remapping keys successfully. I'm a little bit mystified about what's going on here, but it seems that my understanding of how all this works is flawed. Since I've posted a bounty, I'll leave this here for someone to post an explanation for how user-space input devices work under the hood.

  Read the article

• System freezes during boot process

  - by slugster

  Hi everyone, i have a machine running Win7 Ultimate. It was running fine, then it just froze - all the stuff i was doing was still on the screen, but mouse and keyboard input was ignored, any animation that was happening on the screen stopped, the machine literally just froze. So i rebooted (power off button), from then on the machine will reboot, but it ultimately freezes again. The instance when this happens will vary - i have made it as far as the Windows login screen, but mostly it will do the POST, then give me the option to press F1 to continue or Del to enter BIOS settings (but of course pressing a key has no effect - it's frozen!). I have disconnected everything not necessary for the boot process, the only peripheral that remains attached is the keyboard. (even the network cable is disconnected). Prior to this the machine was operating fine. The install of Win7 is only 2 days old, and it was a fresh reinstall (i.e. not an upgrade or repair). Can anyone give me an indication of what may be wrong here? I'm not sure if this question should be here or on SuperUser, please migrate it if i have chosen the wrong board.

  Read the article

• Automate creation of Windows startup script?

  - by Niten

  Is there a good way to automate installing local startup (rather than login) scripts in Windows XP and Windows 7, via the command line, WMI, or otherwise (even COM or Win32 if it comes to that)? I need to setup a local startup script on a large number of computers, and unfortunately, Active Directory is absolutely not an option. I would like to write a script or small program that I can run on each computer to perform the startup script installation in order to save myself a lot of error-prone point-and-click manual labor. I see that when one uses gpedit.msc to create a local startup script, information about the script gets stored in the registry here: HKLM\Software\Policies\Microsoft\Windows\System\Scripts\Startup However, if you create such a script and then delete its registry key, the script will remain listed in the local Group Policy editor; as is so often the case in Windows, apparently there is more going on there than meets the eye. This leads me to question whether it's safe to manually add subkeys for new startup scripts here (I wouldn't want my script to be overwritten by later changes made using the local Group Policy editor, for instance)... Another option that's occurred to me is to create an item in the Task Scheduler configured to run at system startup. However, my concerns there are twofold: Can this be automated any more easily? For instance, the at command doesn't appear to let you schedule a task for system startup, and WMI's Win32_ScheduledJob interface looks unreliable (it fails to show any of my currently scheduled tasks, for one thing). Would I be able to prevent users from logging in until the scheduled startup task is completed, as can be done with "normal" Windows startup scripts? Thanks in advance for any suggestions, I've been banging my head against this one for a bit...

  Read the article

• Sending emails with Thunderbird + Postfix + Zarafa does not work

  - by Sven Jung

  I installed zarafa on my vserver and use as MTA postfix. The webaccess works fine, I can revceive and send emails, also receiving mails with thunderbird (IMAP ssl/tls) works. But there is a problem, sending emails with thunderbird. I established an account in thunderbird with imap ssl/tls connection which works finde, and a starttls smtp connection on port 25 for the outgoing mail server. If I try to send an email with thunderbird I get an error: 5.7.1 Relay access denied this is my mail.log Sep 7 16:10:07 postfix/smtpd[6153]: connect from p4FE06C0A.dip.t-dialin.net[79.224.110.10] Sep 7 16:10:08 postfix/smtpd[6153]: NOQUEUE: reject: RCPT from p4FE06C0A.dip.t-dialin.net[79.224.110.10]: 554 5.7.1 <[email protected]>: Relay access denie$ Sep 7 16:10:10 postfix/smtpd[6153]: disconnect from p4FE06C0A.dip.t-dialin.net[79.224.110.10] and this my /etc/postfix/main.conf # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache virtual_mailbox_domains = firstdomain.de, seconddomain.de virtual_mailbox_maps = hash:/etc/postfix/virtual virtual_alias_maps = hash:/etc/postfix/virtual virtual_transport = lmtp:127.0.0.1:2003 myhostname = mail.firstdomain.de alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = ipv4 I don't know what to do, because actually sending mails to internal and external addresses works with the webaccess. Perhaps somebody can help me?

  Read the article

• MOSS2007 tries to use ActiveDirectory when I have configured an alternative membership provider

  - by glenatron

  I've got a MOSS site that I am trying to configure using Forms authentication and absolutely any kind of membership provider whatsoever. Thus far ActiveDirectory has proved obstructively difficult so I've just whipped up a simple stub membership provider and put it in the GAC. It's a very basic and simple provider but it works fine with an ASP.Net site, I just can't make it work with Sharepoint. On Sharepoint I get the following error when I look for StubProvider:Bob ( or anything else for that matter) from the "Policy For Web Application" people picker: Error in searching user 'StubProvider:bob' : System.ComponentModel.Win32Exception: Unable to contact the global catalog server at Microsoft.SharePoint.Utilities.SPActiveDirectoryDomain.GetDirectorySearcher() at Microsoft.SharePoint.WebControls.PeopleEditor.SearchFromGC(SPActiveDirectoryDomain domain, String strFilter, String[] rgstrProp, Int32 nTimeout, Int32 nSizeLimit, SPUserCollection spUsers, ArrayList& rgResults) at Microsoft.SharePoint.Utilities.SPUserUtility.SearchAgainstAD(String input, SPActiveDirectoryDomain domainController, SPPrincipalType scopes, SPUserCollection usersContainer, Int32 maxCount, String customQuery, TimeSpan searchTimeout, Boolean& reachMaxCount) at Microsoft.SharePoint.Utilities.SPActiveDirectoryPrincipalResolver.SearchPrincipals(String input, SPPrincipalType scopes, SPPrincipalSource sources, SPUserCollection usersContainer, Int32 maxCount, Boolean& reachMaxCount) at Microsoft.SharePoint.Utilities.SPUtility.SearchPrincipalFromResolvers(List`1 resolvers, String input, SPPrincipalType scopes, SPPrincipalSource sources, SPUserCollection usersContainer, Int32 maxCount, Boolean& reachMaxCount, Dictionary`2 usersDict). The Provider is named as Authentication Provider for the Site Collection in question. As far as I can tell this is because Sharepoint is still trying to access ActiveDirectory rather than talking to the provider I'm asking it to use. My Sharepoint Central Administration section includes this: <membership> <providers> <add name="StubProvider" type="StubMembershipProvider.Provider, StubMembershipProvider, Version=1.0.0.0, Culture=neutral, PublicKeyToken=5bd7e2498c3e1a03" /> </providers> </membership> And also: <PeoplePickerWildcards> <clear /> <add key="StubProvider" value="%" /> </PeoplePickerWildcards> Is there a clear reason why this would not be accessible from the PeoplePicker or why it is still trying to use ActiveDirectory? I've made sure I reset IIS and even restarted the server to see if either of those helped but they made no difference.

  Read the article

• SSO "Portal"

  - by Clinton Blackmore

  Pursuant to my question on alleviating the password explosion, I've contacted some of the services to whom we are paying money to access their websites to ask if we could authenticate our own users, and some of them said yes and send me specs on how to do so. (One of the sites called such a system a page a "portal"; I've never heard the term used in quite that way.) It is simple enough that I am tempted to roll my own. The largest complication is that one site wants us to store a key for every user in our database (and I think the LDAP database makes sense) after their initial login. So, non-trivial, but doable. The nature of these sorts of tasks, I expect, is that if they start out small and simple, they don't end that way. There must be some software that addresses this that is readily extended, surely. In my searching, I've come across: SimpleSAMLphp JOSSO RubyCAS-Server Shibboleth Pubcookie OpenID [Wow, gee. I'd missed some of those in my previous searches! The wikipedia page on Central Authentication Services is useful, and the section on Alternatives to OpenID makes it look like there is a lot of choice.] Can anyone recommend any of these, or suggest ones to avoid? Internally, we are authenticating using Apple's Open Directory [ == OpenLDAP + Kerberos + Password Server (which, I believe, == SAML) ]. As far as extending/tweaking/advanced configuration of a system, I am able to program in Python, C++, can do some basic PHP, and may be able to remember some Java. Looks like I need to pick up Ruby at some point. Addendum: I would also like users to be able to change their passwords over the web (and for certain users to change passwords of other users).

  Read the article

• Why do my Xcode default font starts to look ugly after some time, until I restart?

  - by mystify

  I plugged in an external monitor. All resolutions match perfectly. MacBookPro LCD is closed. After restarting Xcode editor fonts look very bad. Only in Xcode. When I restart the mac and DON'T use an external monitor, fonts look all right again. When I attach the monitor and close the LCD of the MacBookPro, fonts look nice. Then I close Xcode and reopen it: Fonts suck. Only way to get fonts look good is to disconnect external monitor and reboot, then reconnect external monitor, close LCD, wait, hit any key and let the external monitor be the only one. Fonts look nice - until I restart Xcode. I think it happens any time Xcode is launched with external monitor attached and ugly fonts survive until reboot. Unplugging external monitor and restarting Xcode doesn't help. It seems like Xcode isn't antialiasing them properly after something happens. Is there a fix for this problem? EDIT: After trying a few more times, it seems it is possible to get fonts to look nice by disconnecting external monitor and reopening xcode. Here are some little snapshots: GOOD FONT: UGLY FONT: You can see how dirty the ugly font looks. It's very hard to read and hurts in the eyes. Believe me. It sucks. Sometimes the little "i" are almost invisible. I make use of the very eye-friendly Dusk style of Xcode (go to preferences and choose that, if you haven't already. A real pleasure for your eyes)

  Read the article

• Eee PC Seashell series netbook screen is cut off at bottom no matter the resolution

  - by Yzmir Ramirez

  I have an Eee PC 1015PE Seashell netbook running Windows 7 Home Premium with an Intel Graphics Media Accelerator 3150 (8.14.10.2230) with a "Generic Non-PnP Monitor" detected. I tried: Changing the resolution (Control Panel = Appearance and Personalization = Display = Screen Resolution) to 1024x768 Updating the video driver (to 8.14.10.2230) Uninstalling the driver and rebooting Pressing the Windows Key + "-" (magnifier) Pressing Ctrl + Mouse Scroll only resizes the desktop items Pressing Fn + F4 shows 1024x600 (which I think is what I should be using, but nothing happens) EDIT: Changed from Landscape to Portrait and it works Attached an External Monitor and when I extend or set as desktop it works only on the External Monitor (shows up as "Generic PnP Monitor in Device Manager) Basically the bottom inch of my desktop is off-screen hiding my start bar, but my wigets are in their proper position (the start bar is not hidden). Pressing Ctrl + Esc shows the start menu but its cut-off. I'm pretty sure I should be using 1024x600 resolution, any advice? What's odd is that this only started happening recently. EDIT2: Here are some screenshots showing the problem: Resized Window to fit: Opened Start Menu - notice it cut off: Maximized window and then scrolled down - notice no Start Menu: I downgraded my graphic driver I downloaded from the Intel Download Center for the Graphic Media Accelerator 3150 (now: 8.14.10.1972) and now my "Generic non-PnP Montior" detects as "Digital Flat Panel (1024x768 60Hz)".

  Read the article

• Why do messenger keeps coming up when I adjust screen brightness?

  - by Asaf R

  My Dell Studio XPS 13 has a brightness up & down buttons (Fn + up arrow / down arrow), as do most laptops have. It's running Windows 7 64bit and I've installed Windows Live Messenger (build 14 and something) on it. When I hit Fn + down arrow, to reduce screen brightness, the Messenger window pops up. That's true whether it has been running in background (system tray / minimized) before or not. Note, to make messenger hide itself to the system tray, I've set it to Vista Compatibility mode. I don't think that has anything to do with it though, since if I shut compatibility mode off, the problem persists. There's a thread on the matter here, but with no solution. Thanks, Asaf SOLUTION: Stop Intellitype when using internal keyboard. See detailed howto here. EDIT: Some new findings on the matter - If I exit messenger entirely and restart (or simply stop) the service "Windows Live ID Sign-in Assistant" the problem is solved until I run messenger again. It persists even after entirely closing messenger, until I restart the said service. EDIT2: The above service "Windows Live ID Sign-in Assistant" actual name is wlidsvc. There's no shortcut defined for messenger, nor is there any other hot key in its preferences. EDIT3: I'm not sure if it's relates, but some of the Fn keys are not working - Fn + F1 doesn't put the machine to sleep, Fn + F3 doesn't show battery status. EDIT4: Problem probably relates to conflict with IntelliType Pro. See my answer below. Said conflict also causes Undo command when disabling Wireless (Wireless touch button), and other side effects for various keys.

  Read the article

• Network to network VPN Centos 5

  - by Atul Kulkarni

  I am trying to follow "http://www.centos.org/docs/5/html/Deployment_Guide-en-US/ch-vpn.html#s1-ipsec-net2net" I have come up with the following On local router machine: in my ifcfg-ipsec0: ONBOOT=yes IKE_METHOD=PSK DSTGW=10.5.27.1 SRCGW=10.6.159.1 DSTNET=10.5.27.0/25 SRCNET=10.6.159.0/24 DST=205.X.X.X TYPE=IPSEC I have /etc/sysconfig/network-scripts/keys-ipsec0 file in place. On Remote Machine in the cloud if have /etc/sysconfig/network-scripts/ifcfg-ipsec1: TYPE=IPSEC ONBOOT=yes IKE_METHOD=PSK SRCGW=10.5.27.1 DSTGW=10.6.159.1 SRCNET=10.5.27.124/25 DSTNET=10.6.159.0/24 DST=38.x.x.x with its respective /etc/sysconfig/network-scripts/key-ipsec1 file. The DST in both cases are NAT'd external IPs. Is that a problem? I have made changes for port forwarding as well. When I try to bring the interfaces up it gives me output "RTNETLINK answers: Invalid argument". I am confused now and don't know what more to do? Any place I can digup what parameters were wrong? I really appreciate any help I can get. Thanks and Regards, Atul.

  Read the article

• Scroll wheel causes browsers + Windows explorer to go back

  - by KaptajnKold

  I use Windows 7 on a VirtualBox VM on a Mac. Lately, when I'm using any browser (IE9, Chrome or FireFox or even Windows Explorer), use of the scroll wheel followed by any movement of the mouse cursor causes the browser to go back. Very annoying. This happens when I use the scroll wheel on a USB connected mouse (brand/model unknown, since I don't have it in front of me as I write this) or when I use two-finger scrolling on the trackpad when no mouse is connected. When I connect from my VM to a remote Windows box (Windows Server 2008), I experience the same problem. I have tried rebooting the VM to no avail. I am not sure when the problem started exactly. It may or may not have been after I connected the USB mouse for the first time, but trying to unplug it and then rebooting didn't help. I have tried to google for a solution, but all I've found are people who accidentally pressed the shift key while scrolling, which will cause the browser to go backward or forward in the browser history. This however is not the problem I'm having. To be clear, in my case the browser only goes back when I move the mouse after I've used the scroll wheel. I'm at my wits end :(

  Read the article

• Cannot establish XMPP server-to-server connection to gmail

  - by v_2e

  My jabber-server fails to connect to gmail.com giving the error: outgoing s2s stream myserver.com.ua-bot.talk.google.com closed: undefined-condition (myserver.com.ua is a Google Apps Domain with Talk service enabled.) I am using the Prosody XMPP server. It works just fine with other jabber-servers I tested so far (e.g. jabber.ru). However, when some of my clients tries to add a gmail contact to his contact-list, the subscription request lasts forever, and the Prosody gives the following sequence of messages in its log: Oct 21 22:57:16 s2sout95897f8 info Beginning new connection attempt to gmail.com ([173.194.70.125]:5269) Oct 21 22:57:16 s2sout95897f8 info sent dialback key on outgoing s2s stream Oct 21 22:57:16 s2sout95897f8 info Session closed by remote with error: undefined-condition (myserver.com.ua is a Google Apps Domain with Talk service enabled.) Oct 21 22:57:16 s2sout95897f8 info outgoing s2s stream myserver.com.ua->gmail.com closed: undefined-condition (myserver.com.ua is a Google Apps Domain with Talk service enabled.) Oct 21 22:57:16 s2sout95897f8 info sending error replies for 2 queued stanzas because of failed outgoing connection to gmail.com Here for the domain name of my server I use myserver.com.ua I found a similar problem described in this thread, but there is no detailed description of the solution there. As for the Google services, I did have a google account where I added the domain name under question to the Webmasters tools page. However, I deleted my account long ago, so now it is unclear, how any of the Google services can relate to my domain name. So my question is: What is the real cause of this problem (my jabber-server configuration or imaginary Google account or something else) and how can I make my Prosody server connect to gmail.com jabber service?

  Read the article

< Previous Page | 620 621 622 623 624 625 626 627 628 629 630 631  | Next Page >