Search Results

Search found 35354 results on 1415 pages for 'joe even'.

Page 626/1415 | < Previous Page | 622 623 624 625 626 627 628 629 630 631 632 633  | Next Page >

• Are some DSL modems cheaper to operate than others? (power usage question)

  - by SetJmp

  I recently have started using a Motorola 2210 in conjunction with AT&T's DSL service in the Silicon Valley area. That gadget runs hot to the touch! Which means... I assume it is gobbling lots of electricity even when I am not using it. Has anyone studied this subject in a rigorous way? Which leads to the question... if the 2210 is very energy inefficient are some DSL modem models cheaper to operate than others? -SetJmp

  Read the article

• cant make outbound calls - asterisk

  - by deanvz

  I have a basic Atcom IP01 with the following config Registered Voip (SIP) Trunk Registered Voip Phone - ext Dial Plan Outbound Call rule I made use of this manual that the manufacturer supplies: http://www.atcom.cn/cn/download/pbx/ip01/ATCOM%20IP01-User%20Manual-V1.0-EN.pdf Whenever I try and make a call, it seems that the outbound call rule that i defined does not get regarded as the default rule even though the dial plan lists this as the only outbound call rule. When dialling I see in the log file the following [Jan 1 09:10:07] NOTICE[176]: chan_sip.c:14377 handle_request_invite: Call from '6001' to extension '00765243679' rejected because extension not found. The 00765243679 is a cellular number. Am I missing a configuration in order to make outbound calls? Land line, other Voip numbers and cellular calls have been tried

  Read the article

• My fingers are cold when using my computer - solutions?

  - by Kjensen

  I am a programmer and sit at a computer ten hours a day - and even though the rest of me is nice and warm, my fingers are as cold as ice. Are there any gadgets or tricks to keep your fingers warm while typing/mousing? Gloves do not seem like a good solution, since it hinders the movement of the fingers. I have sometimes put my extra laptop next to the mouse pad so that it vents hot air on the mouse - and that works. However it is not very practical, plus it only works for one hand (and not very well).

  Read the article

• Is there a terminal that features sliding like guake and screen spliting like terminator on Linux?

  - by e-satis

  Sliding means I got the terminal always in background and I can call it with a shortcut, and it will slide down from the top of the screen like in Quake (which why the most known terminal implementing it is called guake). Splitting terminal means I can seen in one terminal tab several shells, like with screen or tmux. But I can also take the focus on each part of the terminal by clicking on it, not just with a 4 keys keyboard shortcut. Which terminator let me do. Is there a terminal that features both on Linux ? Even something I can pay for.

  Read the article

• configuring nginx as reverse proxy

  - by user55714

  This isn't directly passenger related..but I am hoping some of you might have tried this for sure so why not ask. I am using passenger with nginx to serve my rails app on a virtual slice host. I am considering putting a reverse proxy for serving static content as well as handling etagged actions. 1 - Can I use my existing nginx installation and just change it to a reverse proxy? Do I even need a web server? What would a typical architecture look like in this case? nginx rev-proxy - nginx web server - passenger? or nginx rev-proxy - passenger? 2 - Is nginx the best choice in this case? 3 - Can my reverse proxy reside on the same slice? Thanks

  Read the article

• Windows Proxy Server advice

  - by Scott

  I have a webserver that currently has about 10 IP addresses. I have various clients that require a proxy server to route their internal traffic through. The load is not that great, so I'd like to have this ONE server act as a proxy server for 10 different clients, each client having their own unique IP on the server. The hardware is already setup, but I'm wondering what software solutions you guys recommend? I've looked at WinGate, Squid-Proxy, etc...but am pretty green with this. Maybe there's even a way to have Windows do this natively? I'm running Windows Server 2008, 32 bit.

  Read the article

• How do I extract files from one tarball to another tarball in one step?

  - by Martin

  I have some fairly large tarball archives, from which I need to extract some files. I will later repack those files to transfer them to another server. Currently that is a two (multi) step process for me: mkdir ttmp tar -vxzf large.tgz -C ttmp/ --strip-components=<INT> <folder-to-be-extracted> or alternatively with wildcards mkdir ttmp tar -vxzf large.tgz -C ttmp/ --strip-components=<INT> \ --wildcards --no-anchored '*pattern*' Then I go ahead and recompress the created folder tar -vczf small.tgz ttmp/* rm -rf ttmp How can I combine these two commands into one? Like this tar -x large.tgz > tar -c small.tgz Just to show, what I already tried: Whenever I search the terms "extract" I will end up here or here or even here. When I use the term "split" I will end up here and that is definitely not what I intend to do. When I use "repack" I end up in strange places.

  Read the article

• Is Windows 8 Pro usable without activation?

  - by DzinX

  There seems to be little information about the way activation system works in Windows 8, especially for consumer versions of Windows (Core/Pro, not Enterprise). I already know that Microsoft now requires you to enter a key before even starting the installation process, and that it tries to connect to the Internet and activate this key as soon as possible. Sometimes, though, you don't have Internet connection when installing Windows 8. What then? Can you install Windows? Can you use it? What are the limitations? For how long can you keep your copy of Windows usable without activation?

  Read the article

• How full is too full for mechanical hard drives?

  - by Sunny Molini

  I have heard many claim that it doesn't matter how full a drive is until it starts cutting into temp and virtual memory space. This doesn't make sense to me, given the nature of how the data is transacted on a hard drive. The inside of the platter presents less data per revolution than the outside of the drive does, by significant factors. The inside 40% of the radius of full size hard drive is used for the spindle, so only the outside 60% is used for data storage, but that still means that the inside track of a hard drive presents data 60% slower than the outside track. By my calculation, a Hard drive that is only 10% full should perform about 2.25 times faster than a hard drive that is 90% full, assuming that the flow is constrained by other factors. Am I wildly off base here? For all the drives I know, even the top speeds of the first 1% of the drive would be well within the bandwidth provided by a SATA 2 connection.

  Read the article

• Windows 7 upgrade advisor issue

  - by Groo

  I am preparing to migrate a pretty old XP machine to Windows 7. I ran the Windows 7 Upgrade Advisor and got a couple of smaller issues (low 512Mb RAM complaints and similar stuff). Apart from that, everything else was shown as compatible, including my old ATI Radeon 9550/X1050 card: ATI Radeon 9550/X1550 Series: This device is compatible with Windows 7. The thing that concerns me is that people around the web seem to be unable to actually find a Windows 7 driver for this card. Even the ATI web page states that this is a legacy device: If the user chooses to, they can install the ATI Catalyst Windows Vista graphics driver under Windows 7. [...] Using the ATI Catalyst Windows Vista driver under Windows 7 is not officially supported by AMD [...] Should I trust the Advisor and continue with the update? Does this mean Microsoft will provide at least a generic driver which will allow hardware acceleration with this card?

  Read the article

• Rolling desktop recorder?

  - by lance

  I want a piece of software that will constantly record what I'm doing on my desktop, discarding footage that's over [30] seconds old. Its recording would be a rolling one. The idea is that I can somehow hit a button and see "what just happened". I don't want to have to babysit it. That is, I don't want a piece of software designed for screencasting (which I'm not trying to do). My bias against that is based on my (maybe incorrect?) assumption that I'd regularly have to start/stop the recording throughout the day. The idea is that this piece of software would consume fewer resources (than a screencast recorder) on my box, as it's only keeping a very limited amount of footage in memory (and low quality would even be acceptable), because it's discarding frames fairly quickly after they're captured. Where can I find a piece of software with features like this?

  Read the article

• Intel hybrid graphics stuck in power save mode

  - by OZZIE

  I have an Asus UL30V with Intel hybrid graphics. When I bought it it used to switch to turn of the better graphics card to save power and run on a more power effecient one. When I connected the laptop to a power source again I could go to the intel graphics icon on the task bar and click on "switch to enhanced performance mode" or something similar. But like 2-3 months ago it suddenly vanished. I cannot switch modes anymore, it's gotten stuck in power save mode. I can change the windows power setting but that doesn't enable the better graphics card :( What should I do? I've tried restarting the computer and that does not work. I really hope I don't have to reinstall the drivers! It seems like other people have had the same issue: http://en.community.dell.com/support-forums/laptop/f/3518/p/19422695/19994601.aspx , he hasn't even got the same computer as me. I have windows 7 Home Premium x64 Any ideas?

  Read the article

• How to diagnose a Windows XP hard crash

  - by Jon

  I have a 64-bit Windows XP machine which has hard crashed several times today. The symptoms are that the screen just goes blank, then the reboot cycle starts. There is no blue screen and even though it is switched on, no crash dump file is created. On all occasions it has happened during a period of high CPU/memory activity. I have run a full Dell diagnostics with no failures. Any ideas how to track this down further? Thanks.

  Read the article

• How do I run vino-server without a monitor attached in Ubuntu 10.04

  - by Ole

  I just upgraded to Ubuntu 10.04 yesterday on a headless home server. I use the server for a variety of purposes, and what I don't know how to do via SSH I've alway been able to do through VNC. However, since the upgrade vino-server will no longer run if there isn't a monitor attached. Before it used to start up without a problem. Even by attempting to run the server via SSH gives me a "could not load display" error. Summary: I need to get vino-server running at boot time on a server with Ubuntu 10.04, without a monitor attached.

  Read the article

• Any way to stop VMWare workstation from dropping SSH connections?

  - by oljones

  I have VMWare workstation 8 with a few Linux guests. I have had problems maintaining an active SSH connection to my VMs when they are in bridged mode. I first read that the onboard realtek network cards were not well supported so I bought a Intel Pro/1000 GT card. This supposedly had support. But this made no difference. Connections via SSH are active for about the first 3 minutes then hang and die. I have changed the TCP Checksum offload on the Intel and Realtek NICs, but this only works some of the time and even then not for very long. The best I could do was about 20 minutes before the connection was dropped. Any ideas?

  Read the article

• CentOS, CUPS - printer managment

  - by HTF

  I'm using CentOS 6.3, and trying to get a printer PIXMA iP4950 to work. The printer is attached via USB. I've downloaded and installed the drivers from the Cannon website, and have the printer installed in CUPS. However, when I print anything (even the test page), the job is completed successfully (according to CUPS-log), but the printer does not print a thing. I don't know how to debug this. Have tried to change logging to debug, but I don't see any errors in the error_log and the access_log says: Returning IPP successful-ok for Get-Jobs (ipp://localhost:631/printers/Canon_iP4900_series) from localhost Please note that I was able to print on another CentOS machine however with GNOME Desktop.

  Read the article

• How to issue machine certificates to Android devices trying to connect to L2TP VPN (L2TP/IPsec with Certificate)?

  - by John Hendrix

  I are trying to find a way to connect Android devices to our VPN box running Windows Sever 2008. We manage to configure a couple Android devices to connect via PPTP. However, I would like to be able to connect using L2TP/IPSec with certificates instead. I've managed to export and apply the Enterprise CA's certificate on the Android phone, but are totally lost on how to issue a machine certificate to the Android phone. Is it even possible? If so, what are steps I should take to issue the machine certificate and enable the Android phone to connect via L2TP/IPsec with certificates? Thank you for your help!

  Read the article

• Findstr not finding file when searching by extension

  - by feiht thief

  I am experiencing some odd behaviour when using findstr to search a collection of .php files. Depending on how I specify the file list, the file is not being found, even though it contains the string in question. These two files contain the string "personemail": Content.php and People.php A) Works as expected (finds personemail in Content.php and People.php) findstr /i /s /c:"personemail" * B) Fails (finds only in Content.php) - expected to find in Content.php and People.php findstr /i /s /c:"personemail" *.php C) Works as expected (finds in People.php): findstr /i /s /c:"personemail" p*.php What is going on?

  Read the article

• Can't ssh from Ubuntu to RHEL or CentOS

  - by Alex N

  I am trying to setup publickey based authenitcation for 2 different boxes. One RHEL another on e is CentOS. I am having same issue with both where ssh fails and falls back to password based authentication. Error that seems to be causing this is quite obscure: debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_1000' not found Both boxes are completely unrelated. I have my public key in .ssh/authorized_keys file on both boxes, all permissions are checked and good(700 for .ssh and 600 for internals) I have bunch of other servers that are running on various flavors(Gentoo, Fedora, FreeBSD etc.) and publickey ssh works just fine, but CentOS and RHEL giving me this for some reason :( Anyone experienced this before? I am not even sure how to further analyze this issue :(

  Read the article

• VGA resolution with Sony Bravia TV

  - by prestomation

  I just bought Sony Bravia KDL40S5100 tv. The VGA input is acting weird. I have a Gateway desktop with Windows 7 and Intel 945 graphics. I also have a laptop running Ubuntu 9.04. The TV will not display the gateway when the resolution is over 1360x768, I have to wait for it to time out and bring me back. The Intel driver even urges me to switch to the "recommended" 1920x1080. I just installed Win7 using this tv as the monitor. When the orginial welcome screen started after setup, it started me at 1080. I had to start in safemode to set a res that would work! When I plug my laptop into the TV, 1920x1080 works just fine. Any ideas? This laptop also has Win7, which I am going to try, but I haven't gotten a chance yet.

  Read the article

• Can a custom DPI setting be applied to Remote Desktop sessions?

  - by sejong

  Can a custom DPI setting be applied to Remote Desktop sessions? When you try to change the DPI from a Remote Desktop session, you get a message that display settings can't be changed from a remote session. That made me think that changing DPI from a console setting would work. It did, sort of. If I connected via Remote Desktop to an existing console session with a custom DPI setting, that setting would be applied to the Remote Desktop session. However, if I logged off that session, the custom DPI would not be applied to subsequent Remote Desktop sessions even though it was maintained for subsequent console sessions. It looks like the registry value HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics\AppliedDPI (and perhaps other values) is overwritten at logon, but I haven't been able figure out how to prevent it.

  Read the article

• Windows 8 will only recognize the Blu-Ray drive, if the Windows 8 disc is present at boot time

  - by aceinthehole

  If I have the install disc in the Blu-Ray ROM drive at boot time and subsequently remove the disc and replace it with Blu-Ray media, everything functions as I’d expect. However, if I have no media present, or another disc in the drive at boot time, then Windows 8 does not seem to recognize that the Blu-Ray player is even present in the computer. It is not present in My Computer, the Device Manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expected, but what is it about having the Windows 8 install disc in the drive or not that would cause this kind of behavior?

  Read the article

• Windows 8.1 & manual removal of "Sentinel Runtime Drivers"

  - by uos??

  I'm trying to install Windows 8.1 (basic upgrade from Windows 8). It is complaining of Sentinel Runtime Drivers incompatibility. I've looked for it in my Programs & Features list, but it's not there by that name nor SafeNet (as related by google search) nor do I see any obvious candidates for it having been bundled with another listed application. I tried the "Sentinel Runtime Driver Cleanup" program from the SafeNet website. It ran but was ineffective, even after a reboot. Do you recognize this "Sentinel Runtime Drivers"? I ran MalwareBytes too, just in case, but it found nothing.

  Read the article

• Shrinking physical volumes in LVM on a Linux Guest in ESXi 5.0

  - by Stew

  The problem: Linux guest (OpenSuse 12.1), with multiple virtual disks attached. 3 disks are in a logical volume, two of which are exactly 2TB. None of the disks are independent, and due to the backup software we use, cannot be independent. When the two 2TB virtual disks are "dependent", the snapshot fails stating that the file is too large for the datastore. When I put those two disks in independent mode, snapshots work fine (the other disk is 1.8TB). I have therefore concluded that even shrinking the two physical disks by 100GB should solve the problem, however I am having trouble conceptualizing how to go about getting those disks smaller without breaking the LVM entirely. The actual LV has 1.3TB free, so there is plenty of space to shrink with. What I need to accomplish: Deallocate 100GB from the two, 2TB virtual disks within the linux guest. Shrink the two virtual disks by 100GB within vsphere (not as complicated). Are there any vsphere/LVM gurus that can give me a clue?

  Read the article

• To Run Linux (Ubuntu) on Windows 7, is using Virtual PC one of the best ways?

  - by Jian Lin

  I need to try Linux (Ubuntu) and feel hesitant to install Ubuntu on top of a Win 7 machine to dual boot (might need to use Win7 and Ubuntu at the same time). Is creating a Virtual PC on Win7, and then installing the latest Ubuntu on that Virtual PC one of the better option? So I think I can create a Virtual PC with an empty virtual hard disk (vhd), say, for 30GB, and then put in the Ubuntu DVD-R or CD-R to install Ubuntu onto that empty hard disk. Update: for some reason, the first time Ubuntu 10.04 installation CD-R boots up, it asked for the Language, and "Install Ubuntu" and then the screen has vertical green bars and then the VPC just closed. The 2nd or 3rd time it booted up, there is no asking of Language or "Install Ubuntu" and just shut down the VPC, sometimes with vertical green bars. I even created another new hard drive and same thing happened. And created VPC 02, and same thing happened. Created VPC 03 with a fixed hard drive size of 60GB and same thing happened.

  Read the article

< Previous Page | 622 623 624 625 626 627 628 629 630 631 632 633  | Next Page >