Search Results

Search found 20140 results on 806 pages for 'output formatting'.

Page 626/806 | < Previous Page | 622 623 624 625 626 627 628 629 630 631 632 633  | Next Page >

• Wordpress on Apache is redirecting all https to http

  - by Krist van Besien

  I have a problem with a wordpress site on a server I admin. I don't know anything about wordpress however. My problem is that we want the site to be accessed over https, bot somehow all requests to https:// URLs are answered by the server with a 302, redirecting to http. The wordpress site itself is configured to use https, and we see that in the pages that are generated the links are all https links. In the apache config there are no rewrite rules and no redirects. However, any request to a https:// URL is answered with a redirect to the equivalent http URL. And I really would like to know where these redirects are coming from, what is generating these redirects. I've increased the loglevel on the webserver to DEBUG, but did not get any info there. I tried to enable debug logging in wordpress per the recipy I found here: http://codex.wordpress.org/Debugging_in_WordPress But did not get a debug.log file in the directory where one should appear. I'm really at a loss here, and need to fix this urgently. Any hints as where to start looking? Apache is 2.2.14 on Ubuntu. There are several other virtual hosts on this server, using php and https without any problem... Edit: I created a small info.php script and dropped that in the webservers' root. Calling this yields the output of the script, no redirect is generated. This suggest that it's not the webserver, but wordpress that is doing it. A second thing I noticed is that the redirect comes with several cookies, one of which has "httponly" set. Could that be it?

  Read the article

• Sound doesn't work anymore after replacing RAM

  - by thejh

  Hello, today, I replaced one old RAM module with two newer, bigger ones, but now, the sound doesn't seem to work anymore. Already ran alsaconf and it didn't help. Output of lspci for the audio device: 00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1) Subsystem: Giga-byte Technology Device a002 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at f5100000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel The audio device is onboard and has six configurable outputs, two or so are also capable of being an input (if I remember it correctly), but I don't know how to control it under linux. Does somebody know how/whether replacing the RAM could be related to my problem and/or how to fix it?

  Read the article

• PC doesn't POST with a certain model of PSU

  - by Core Xii

  I have this PC with an Asus P5N32-E SLI motherboard and an Intel Q6600 CPU. I got a new RX-5300 PSU, but it didn't work. The motherboard power LED is on fine When I switch power on, the PC powers up briefly (0.5-1 sec) then shuts down From there on out when I switch power on, it stays on, all fans and components seem to be receiving power, but the motherboard won't POST. No video output, no PC speaker beeps, nothing If I turn the hard switch on the PSU off and then back on again, go to step 2; The PC turns on and then off immediately again, and on subsequent power-ups it stays on but won't POST I disconnected every component but the motherboard, CPU and PSU. Still nothing. I tried three other models of PSU on this PC, both of higher (600) and lower (<300) wattage than the 530 on the RX-5300 and they all work fine. At this point I was convinced the PSU was faulty so I returned it. When the replacement arrived, it behaved exactly the same. So two different units of RX-5300 both with the same symptoms, neither working with this motherboard + CPU. Yet, three other models of PSU work perfectly fine. The PC store couldn't reproduce my problem with the returned PSU. I tried resetting the CMOS with the jumper. I tried with both the 4 and 4+4 (with and without the extra +4 connected) CPU connectors (curiously the RX-5300 comes equipped with both). Could it be a statistical probability that I get two units of the same model of PSU that are faulty in the exact same manner? Could the RX-5300 model itself be somehow incompatible with this motherboard? I was under the impression that PSUs were pretty much universal so long as you have the wattage. Could the motherboard be broken in some such a way as to work with certain PSUs but not others? What's going on here?

  Read the article

• Is there any way to shut up my ATI HD 5770?

  - by slpsys

  So to preface, I basically built Jeff's machine; I already had some of the components, including (scarily enough) the exact same case1. I've been buying bits and pieces over the past few months, which coincided perfectly with his recent post about three monitors, though not being a gamer outright, I opted for the second-from-the-bottom option. After finally plopping all the pieces lovingly into the case this evening, I turn it on...and it sounds like four professional grade hair-driers. Some quick regression analysis determined that with the video card out, the running machine sounded no louder than our house's vents. Basically, my last desktop build included a $45-at-the-time graphics card, and it's been Macbook Pros and workstations since then, so I have zero idea whether I'll just be able to tune the fan speed later on. Will I be able to get this thing to quiet down every time I'm not playing Modern Warfare 2 at maximum framerate, or should I just send this thing back now, and get the quietest card in my pricerange? 1 One thing of note is that I do not have noise-absorbing foam in the case, as is pictured in the article. I'm only mentioning that because I suspect it could drop the overall output a few decibels, but obviously not that many.

  Read the article

• PHP Not Automatically Updating With ?reload=1

  - by user32007

  A friend built a ranking system on his site and I am trying to host in on mine via wordpress and godaddy. It updates for him but when I load it to my site, it works for 6 hours, but as soon as the reload is supposed to occur, it errors and I get a 500 timeout error. His page is at: jeremynoeljohnson .com/yakezieclub My page is currently at http://sweatingthebigstuff.com/yakezieclub but when you ?reload=1 it will give the error. Any idea why this might be happening? Any settings that I might need to change? Here is the top of the index.php file. I'm not sure which part of any of it is messing up. I literally uploaded the same code as him. Here's the reload part: $cachefile = "rankings.html"; $daycachefile = "rankings_history.xml"; $cachetime = (60 * 60) * 6; // every 6 hours, the cache refreshes $daycachetime = (60 * 60) * 24; // every 24 hours, the history will be written to - or whenever the page is requested after 24 hours has passed $writenewdata = false; if (!empty($_GET['reload'])) { if ($_GET['reload']== 1) { $cachetime = 1; } } if (!empty($_GET['reloadhistory'])) { if ($_GET['reloadhistory'] == 1) { $daycachetime = 1; $cachetime = 1; } } if (file_exists($daycachefile) && (time() - $daycachetime < filemtime($daycachefile))) { // Do nothing } else { $writenewdata = true; $cachetime = 1; } // Serve from the cache if it is younger than $cachetime if (file_exists($cachefile) && (time() - $cachetime < filemtime($cachefile))) { include($cachefile); echo ""; exit; } ob_start(); // start the output buffer ?

  Read the article

• Strange issue in header location redirect

  - by hd01

  I have three websites hosted (example1.com, example2.com, example3.com) on a server. There is a page (test.php) on example1.com with just code below inside it: <?php header('Location:http://example2.com/a.php'); ?> When I browse test.php it goes to http://example1.com/a.php . it doesn't understand it is another domain url, it tried to find the page on itself. but when I put http://google.com instead of example2.com/a.php it works correct. I really get confused. What is the problem ? Should I set some configuration on the server? ( I am administrator of the hosting server ). Ps. The server is behind a pound server. Here's the Firebug Net output for example1.com/test.php Response Headers: HTTP/1.1 302 Found Date: Tue, 09 Oct 2012 09:03:34 GMT Server: Apache/2.2.16 (Debian) Location: http://example1.com/a.php Vary: Accept-Encoding Content-Encoding: gzip Content-Length: 21 Keep-Alive: timeout=15, max=100 Connection: Keep-Alive Content-Type: text/html; charset=utf-8 Request Headers: Accept text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Encoding gzip, deflate Accept-Language en-us,en;q=0.5 Connection keep-alive Cookie mycookie Host example1.com User-Agent Mozilla/5.0 (X11; Linux i686; rv:14.0) Gecko/20100101 Firefox/14.0.1

  Read the article

• connections in FIN_WAIT and CLOSE_WAIT state

  - by Raj

  I would like to elaborate the setup so You guys can understand the question and answer more accurately. I have HAProxy as load-balancer, 4 webservers (apache 2.2.3) and one database server (MySQL 5). I am monitoring these servers by nagios. I have disabled the keepalive on apache as we have only 8GB of memory. Now what happens whenever I receive alerts for high memory and cpu utilization, I have observed that the connections from apache to database server hang in established mode (keepalive with timeout value of 7200) and at other side means connections between haproxy and apache shows status as FIN_WAIT on haproxy server and CLOSE_WAIT at apache side. I also see the huge memory swapping and apache taking the most of the memory. I did strace on apache process and did not find any information. strace gets attached to apache process but did not produce any output. The processlist on Mysql server show s those processes in sleep mode. The application on webserver is Magento a php application. if you need further information please let me know. Thanks.

  Read the article

• Enabling http access on port 80 for centos 6.3 from console

  - by Hugo

  Have a centos 6.3 box running on Parallels and I'm trying to open port 80 to be accesible from outside tried the gui solution from this post and it works, but I need to get it done from a script. Tried to do this: sudo /sbin/iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT sudo /sbin/iptables-save sudo /sbin/service iptables restart This creates exactly the same iptables entries as the GUI tool except it does not work: $ telnet xx.xxx.xx.xx 80 Trying xx.xxx.xx.xx... telnet: connect to address xx.xxx.xx.xx: Connection refused telnet: Unable to connect to remote host UPDATE: $ netstat -ntlp (No info could be read for "-p": geteuid()=500 but you should be root.) Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:37439 0.0.0.0:* LISTEN - tcp 0 0 :::111 :::* LISTEN - tcp 0 0 :::22 :::* LISTEN - tcp 0 0 ::1:631 :::* LISTEN - tcp 0 0 :::60472 :::* LISTEN - $ sudo cat /etc/sysconfig/iptables # Generated by iptables-save v1.4.7 on Wed Dec 12 18:04:25 2012 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [5:640] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT # Completed on Wed Dec 12 18:04:25 2012

  Read the article

• Vim autocommand on BufDelete prevents opening help window

  - by Kyle Strand

  I have the autocommand described here in my .vimrc: http://superuser.com/a/669463/199803 EDIT: Copied into body of question for convenience: function CountListedBuffers() let cnt = 0 for nr in range(1,bufnr("$")) if buflisted(nr) && ! empty(bufname(nr)) let cnt += 1 endif endfor return cnt endfunction function QuitIfLastBuffer() if CountListedBuffers() == 1 :q endif endfunction autocmd BufDelete * :call QuitIfLastBuffer() Bizarrely, though, it seems that if I have exactly one listed buffer, and I try to use the :help command, the help window fails to open (or perhaps opens and is immediately closed). If I comment out that autocommand line in my .vimrc, this behavior no longer occurs. Why is this happening, and how can I fix it? Why would :h even trigger the BufDelete event? EDIT: setting verbosity to level 12, I can see that the BufDelete event is indeed occurring. Here's the portion of the output that looks relevant to me: Executing BufAdd Auto commands for "*" autocommand call <SID>BMAdd() calling function <SNR>6_BMAdd calling function <SNR>6_BMAdd..<SNR>6_BMFilename calling function <SNR>6_BMAdd..<SNR>6_BMFilename..<SNR>6_BMMunge calling function <SNR>6_BMAdd..<SNR>6_BMFilename..<SNR>6_BMMunge..<SNR>6_BMTruncName function <SNR>6_BMAdd..<SNR>6_BMFilename..<SNR>6_BMMunge..<SNR>6_BMTruncName returning '/usr/local/share/vim/vim74/doc' continuing in function <SNR>6_BMAdd..<SNR>6_BMFilename..<SNR>6_BMMunge function <SNR>6_BMAdd..<SNR>6_BMFilename..<SNR>6_BMMunge returning 'help\.txt\ (4)\^I/usr/local/share/vim/vim74/doc' continuing in function <SNR>6_BMAdd..<SNR>6_BMFilename calling function <SNR>6_BMAdd..<SNR>6_BMFilename..<SNR>6_BMHash function <SNR>6_BMAdd..<SNR>6_BMFilename..<SNR>6_BMHash returning #340582286 continuing in function <SNR>6_BMAdd..<SNR>6_BMFilename function <SNR>6_BMAdd..<SNR>6_BMFilename returning #0 continuing in function <SNR>6_BMAdd function <SNR>6_BMAdd returning #0 continuing in BufAdd Auto commands for "*" Executing BufDelete Auto commands for "*" autocommand :call QuitIfLastBuffer()

  Read the article

• What Logs / Process Stats to monitor on a Ubuntu FTP server?

  - by Adam Salkin

  I am administering a server with Ubuntu Server which is running pureFTP. So far all is well, but I would like to know what I should be monitoring so that I can spot any potential stability and security issues. I'm not looking for sophisticated software, more an idea of what logs and process statistics are most useful for checking on the health of the system. I'm thinking that I can look at various parameters output from the "ps" command and compare to see if I have things like memory leaks. But I would like to know what experienced admins do. Also, how do I do a disk check so that when I reboot, I don't get a message saying something like "disk not checked for x days, forcing check" which delays the reboot? I assume there is command that I can run as a cron job late at night. How often should it be run? What things should I be looking at to spot intrusion attempts? The only shell access is SSH on a non-standard port through UFW firewall, and I regularly do a grep on auth.log for "Fail" or "Invalid". Is there anything else I should look at? I was logging the firewall (UFW) but I have very few open ports (FTP and SSH on a non standard port) so looking at lists of IP's that have been blocked did not seem useful. Many thanks

  Read the article

• How to execute a command whenever a file changes?

  - by Denilson Sá

  I want a quick and simple way to execute a command whenever a file changes. I want something very simple, something I will leave running on a terminal and close it whenever I'm finished working with that file. Currently, I'm using this: while read; do ./myfile.py ; done And then I need to go to that terminal and press Enter, whenever I save that file on my editor. What I want is something like this: while sleep_until_file_has_changed myfile.py ; do ./myfile.py ; done Or any other solution as easy as that. BTW: I'm using Vim, and I know I can add an autocommand to run something on BufWrite, but this is not the kind of solution I want now. Update: I want something simple, discardable if possible. What's more, I want something to run in a terminal because I want to see the program output (I want to see error messages). About the answers: Thanks for all your answers! All of them are very good, and each one takes a very different approach from the others. Since I need to accept only one, I'm accepting the one that I've actually used (it was simple, quick and easy-to-remember), even though I know it is not the most elegant.

  Read the article

• Using screen to monitor non-interactive scripts (or some other solution)

  - by Michael

  I have some autonomous scripts that run commands on remote machines over ssh. These scripts rely on getting stdout, stderr, and the return code of each command run. I want to be able to monitor the progress of the scripts on each target machine so that I can see if something has hung and possibly intervene if necessary. My initial idea was to have the scripts run commands in a screen session, so that the person monitoring could simply attach to the session with screen -x. However, it was hard to do that from a script since screen is an interactive program. I can send a command to the screen session with screen -S session -X stuff "command^M", but then I don't get the output and return code that I need back. My second idea was to put script /path/to/log in ~/.bash_profile and log the entire session to a file. Then the monitoring person could simply tail the log file. However, this doesn't provide the interactivity that I was looking for. Any ideas on how to solve this problem?

  Read the article

• Is there an Installer Analyser tool that can list what Registry Keys will be created?

  - by EvoGamer

  I can think of 3 ways to achieve my goal: Create a clean VPC, install a given piece of software, and compare the before and after states. Somehow reverse-engineer the installer. Somehow redirect the output of the installer in question so that all registry calls and copy/move file commands are recorded, but not executed. The first option can be done manually, or potentially automated, but I feel it's rather OTT for my needs. The second could cause all sorts of licencing issues, not to mention it may not always return a correct result. Also, without delving into hex editing, I can't think of a way that it would be possible to do manually (some installers - eg Anti-Virus software - may react unfavourably on automated attempts to investigate the installer). The third option shows the most promise, although if the first could be stripped down into a lightweight throwaway environment, it would work pretty much the same way. However, I'm not sure how to do it. So my question is: What tools are available (if any) and/or how could I find out this information manually? I'm not looking to reverse-engineer anything (if I can help it), but I just want to know exactly what changes are being made to my PC by a given piece of software.

  Read the article

• Assembling Software RAID in Live CD for data recovery

  - by Maletor

  I need help recovering some data that's on my RAID which is on a LVM on my server running Ubuntu. What happened was I deleted the logical volume that controlled my swap space which was on a partition on drives sda2, sdb2, sdc2, and sdd2 in RAID1. This foobared my whole system for one reason or another. Booting leave me with grub rescue and an error saying that it is an unknown filesystem. When I boot to a live cd I can see my RAID arrays and I can even start them up. However, it doesn't appear to mount them anywhere so I can't see the data. I am in the live cd now and I have done sudo apt-get install mdadm lvm2 so it should be mounting them correctly. I just can't see why it wouldn't. Please any help is appreciated here. Here is some output. By the way, there are 3 RAIDs, 1) /boot 100mb RAID1, 2) swap 10gb RAID1, 3) root 990GB RAID5 ubuntu@ubuntu:~$ df -h Filesystem Size Used Avail Use% Mounted on aufs 124M 101M 18M 86% / none 2.0G 324K 2.0G 1% /dev /dev/sde1 2.0G 826M 1.2G 42% /cdrom /dev/loop0 667M 667M 0 100% /rofs none 2.0G 164K 2.0G 1% /dev/shm tmpfs 2.0G 28K 2.0G 1% /tmp none 2.0G 92K 2.0G 1% /var/run none 2.0G 0 2.0G 0% /var/lock none 2.0G 0 2.0G 0% /lib/init/rw /dev/md1 91M 73M 15M 84% /media/5ac3dbf1-a6c5-409c-96ae-edc6e27992c7 ubuntu@ubuntu:~$ cat /etc/fstab aufs / aufs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0 /dev/sda2 swap swap defaults 0 0 /dev/sdb2 swap swap defaults 0 0 /dev/sdc2 swap swap defaults 0 0 /dev/sdd2 swap swap defaults 0 0

  Read the article

• File descriptor linked to socket or pipe in proc

  - by primero

  i have a question regarding the file descriptors and their linkage in the proc file system. I've observed that if i list the file descriptors of a certain process from proc ls -la /proc/1234/fd i get the following output: lr-x------ 1 root root 64 Sep 13 07:12 0 -> /dev/null l-wx------ 1 root root 64 Sep 13 07:12 1 -> /dev/null l-wx------ 1 root root 64 Sep 13 07:12 2 -> /dev/null lr-x------ 1 root root 64 Sep 13 07:12 3 -> pipe:[2744159739] l-wx------ 1 root root 64 Sep 13 07:12 4 -> pipe:[2744159739] lrwx------ 1 root root 64 Sep 13 07:12 5 -> socket:[2744160313] lrwx------ 1 root root 64 Sep 13 07:12 6 -> /var/lib/log/some.log I get the meaning of a file descriptor and i understand from my example the file descriptors 0 1 2 and 6, they are tied to physical resources on my computer, and also i guess 5 is connected to some resource on the network(because of the socket), but what i don't understand is the meaning of the numbers in the brackets. Do the point to some property of the resource? Also why are some of the links broken? And lastly as long as I asked a question already :) what is pipe?

  Read the article

• What is the fall off of subsecond throughput on Ethernet Network Interfaces

  - by Kyle Brandt

  On a network interface, speeds are given in term of data over time, in particular, they are bits per second. However, in the uber-fast world of computing -- a second is kind of a really long time. So for example, given a linear falloff. A 1 GBit per second interface would do 500MBit per half second, 250Mbit per quarter second etc. I imagine at certain units of time, this is no longer linear. Perhaps this is set by ethernet frequencies, system clock speeds, interrupt timers etc. I am sure this varies depending on the system -- but does anyone have more information or whitepapers on this? One of the main reasons I am curious is to understand output drops on interfaces. Even if the speed per second is much lower than the interface can handle -- perhaps there are spikes that cause drops for only small numbers of milliseconds. Perhaps various coalescing would hide this effect -- or perhaps increase it on the receiving interface? Do queues make a difference here? Example: So given if this is linear down to the MS we would have 1Mbit/MS, and if Wireshark isn't distorting what I see, should I see drops when I have a spike beyond 1Mbit?

  Read the article

• Excel: How to treat multiple lines as one while sorting?

  - by crono

  I get a XLS-File as a database report. The File is in the following format: | Customer | Name | ... | Orders 1 | 6 | ... | ... | 1234 2 | | | | 4567 3 | | | | 8910 4 | 3 | ... | ... | 3210 5 | | | | 8765 6 | 1 | ... | ... | 1000 7 | | | | 1001 I need to sort this thing on a column which is only "filled" in the first line of a "record" (here: Line 1-3, 4+5, 6+7) like "Customer" in this example. Is there a way (without falling back to VBA) to keep the lines together which form a "record" while sorting on them. I know, this is abusing Excel but I have no other choise here. The expected output after sorting on "Customer" would be: | Customer | Name | ... | Orders 1 | 1 | ... | ... | 1000 2 | | | | 1001 3 | 3 | ... | ... | 3210 4 | | | | 8765 5 | 6 | ... | ... | 1234 6 | | | | 4567 7 | | | | 8910

  Read the article

• Mysterious swap usage on EC2

  - by rusty

  We're in the middle of a project to move our infrastructure from a co-lo situation into Amazon EC2 and we've noticed some weird memory characteristics of the processes in our setup. Without going into too much detail about the specifics of our processes, we've noticed that on our EC2 instances "top" will show processes using a lot of swap space -- in fact, much greater than the amount of available swap or (if you add it all up) more than the available disk. Here's a sample top output: Mem: 7136868k total, 5272300k used, 1864568k free, 256876k buffers Swap: 1048572k total, 0k used, 1048572k free, 2526504k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ SWAP COMMAND 4121 jboss 20 0 5913m 603m 14m S 0.7 8.7 3:59.90 5.2g java 22730 root 20 0 2394m 4012 1976 S 2.0 0.1 4:20.57 2.3g PassengerHelper 20564 rails 20 0 2539m 220m 9828 S 0.3 3.2 0:23.58 2.3g java 1423 nscd 20 0 877m 1464 972 S 0.0 0.0 0:03.89 876m nscd You can see, for instance, that jboss is reportedly using 5.2 gigs of swap space which is definitely impossible since there's only 1G allocated and none is being used (probably because there's still 1.8G of RAM free). And here's the results of uname -a: Linux xxx.yyy.zzz 2.6.35.14-106.53.amzn1.x86_64 #1 SMP Fri Jan 6 16:20:10 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux We're running an AMI based off of the default Amazon Linux AMI (Amazon Linux AMI release 2011.09, so some RHEL5 and RHEL 6) with not too many customizations and definitely no kernel-level customizations. Something here tells me that on this particular kernel/distribution, the reporting of swap or maybe even total memory usage isn't what it appears to be... Any help would be appreciated!

  Read the article

• Trouble with Remote Desktop pulling through printers. Drive Redirection works, and the ports created but not the printers

  - by Windex

  I've run out of things to look into. All the support documents have been gone through and still provide no resolution. I've checked the service permissions, (sc sdshow spooler) they all match up with other systems and what is output on the support documents. I'm nearly positive that the issue can't be permissions anyway as the software requires all users to be an administrator, so all users are a local administrator. (I haven't looked into why yet but its on the list, I was just recently brought into this team and we've put procedures in place for quick recovery.) We've applied hot fixes relating to RDS and printing, though I'm not sure which ones they were. I've combed through group policy and no where is printer redirection disabled. It's setup with all default values regarding the use and redirection of printers and a quick install of W2k8 R2 shows that it works by default. This dev install was joined to the same domain, placed in the same OU, shows the same policies applied, etc, etc, etc, The server generates all the correct redirected ports but no printers are created. It will also redirect drives without issue, this would seem to rule out the usermode service that handles redirects being broken. No events are logged related to any of the events and there are no events from the TerminalServices-Printer source. There were local printers setup. I didn't think it would mattter but as I was running out of ideas I tried deleting them all with no change. The TS was configured for the software it will be running before we checked out the redirection of printers so the other team responsible to setting up new servers wants to find a fix instead of reloading a new server. I'm not sure where or what else to look for. Any ideas?

  Read the article

• Robocopy (without /l flag) running for hours making log file huge, but not actually copying anything

  - by Mickster

  Here's my command: Robocopy C: C:\C_root /FP /BYTES /TEE /S /E /COPYALL /DCOPY:T /MOVE /Z /ETA /XJ /R:2 /W:30 /XF pagefile.sys /XD /LOG:C:\robocopy.log. BTW, notice the /XD option above. After that I had a few directories that I want to omit. I showed these between angle brackets like this: (left angle bracket) a few dirs I wanted to exclude (right angle bracket). Amongst these dirs was the C_root dir itself, so that it did not get into an "infinite" recursion. (This part was stripped from the post because angle brackets apparently have a meta-meaning to superuser.com about hyperlinks.) The command window this was running in listed a few "EXTRA" files then "hung". By this, I mean no more output, no cmnd prompt, and if I tried to scroll it up, it would immediately scroll right back to the bottom. After about six hours, it finally finished, although I never got a cmnd prompt back in the window I started it in. DIR shows the log file at more than 1.3GB, but when I try to do a MORE on it, I get "Cannot access file". C:\C_root never grew larger. Does anyone have an idea what is going on here?

  Read the article

• How do I install Apache Portable Runtime?

  - by apache

  My Apache is installed by yum install apache And now I'm trying to install subversion server from source following instructions here. But when I try to configure,get an error: [root@vps303 subversion-1.6.9]# ./configure configure: Configuring Subversion 1.6.9 configure: creating config.nice checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes ... checking for APR... no configure: WARNING: APR not found The Apache Portable Runtime (APR) library cannot be found. Please install APR on this system and supply the appropriate --with-apr option to 'configure' or get it with SVN and put it in a subdirectory of this source: svn co \ http://svn.apache.org/repos/asf/apr/apr/branches/1.2.x \ apr Run that right here in the top level of the Subversion tree. Afterwards, run apr/buildconf in that subdirectory and then run configure again here. Whichever of the above you do, you probably need to do something similar for apr-util, either providing both --with-apr and --with-apr-util to 'configure', or getting both from SVN with: svn co \ http://svn.apache.org/repos/asf/apr/apr-util/branches/1.2.x \ apr-util configure: error: no suitable apr found How do I get around this problem? BTW,will both client and server software be installed by compiling from source?

  Read the article

• Using multiple USB webcams in Linux

  - by rachelderp

  Running more than one USB webcam in Debian/Linux results in the the following error: libv4l2: error turning on stream: No space left on device VIDIOC_STREAMON: No space left on device What initially seemed to be a programming issue in OpenCV turned into a quest for a mysterious hardware/software problem after the same errors were produced by running cheese and xawtv. Apparently it's caused by webcams requesting all the available bandwidth on the USB host controller. With that in mind I decided to run wireshark and capinfos to see just how much bandwidth a single camera used. 4 megabits per second at 320x240 14 megabits per second at 640x480 32 megabits per second at 1920x1080 Interesting! That might explain why two cameras at 320x240 work but any higher resolution fails. It's as if my USB controller is only operating at USB 1 speeds, yet lsusb shows both webcams belonging to a device which supposedly supports 480 megabits per second. One solution proposed forcing the webcams to calculate their bandwidth usage instead of requesting their maximum by running the following commands: sudo rmmod uvcvideo sudo modprobe uvcvideo quirks=128 Unfortunately that made no difference, so I decided to try another solution. A post on StackOverflow suggested telling my webcams to use a lower FPS or compressed video format like MJPEG, but after running v4lctl list it doesn't appear either of my webcams support changing their video mode. And that's where I'm stuck. Why would two webcams operating well below the maximum speed of USB 2 would produce this error? ps: It's not a disk space issue, df displays no change when the webcams are started. pps: If it makes a difference, here's the output of lsusb

  Read the article

• Hard Reset USB in Ubuntu 10.04

  - by Cory

  I have a USB device (a modem) that is really finicky. Sometimes it works fine, but other times it refuses to connect. The only solution I have found to fix it once it gets into a bad state is to physically unplug the device and plug it back in. However, I don't always have physical access to the machine it is plugged in on, so I'm looking for a way to do this through the command line. This post suggests running: $ sudo modprobe -w -r usb_storage; sudo modprobe usb_storage However I get an "unknown option -w" output. This slightly modified command: $ sudo modprobe -r usb_storage Fails with the message FATAL: Module usb_storage is in use. If I try to kill -9 the processes marked [usb-storage] before running they refuse to die (I think because they are deeply tied to the kernel). Anyone know of a way to do this? NOTE: I cross-posted this on serverfault as I didn't know which was more appropriate. I will delete and/or link whichever one is answered first.

  Read the article

• Printer deployment via Group Policy not working on a single system

  - by Aron Rotteveel

  One of my coworkers just got a new laptop running Windows 7 Pro x64. We use a GPO to deploy the printers to every system, but for some reason it is not working on this system. I have been breaking my head over this for the past 3 hours now without any result. The strange thing is that gpresult /H seems to indicate that the GPO did run. The hardware: Laptop: Windows 7 Professional x64 Print server: Windows Server 2008 x64 R1 HP Color LaserJet 2605dn HP LaserJet P2015 Driver packages on server: HP universal printer driver PCL5, both X86 as X64 Oddities and other info: GPO working flawlessly on every other system, including my own Windows 7 Ultimate X64 laptop gpresult /H shows the GPO being ran Windows Firewall completely disabled on the new laptop Below is the output for gpresult /H (in Dutch sadly, but I think you'll recognize it): Beleidsregels Windows-instellingen Printerverbindingen Pad Dominerend groepsbeleidsobject \\Server2008\HP Color LaserJet 2605dn Printers \\Server2008\HP LaserJet P2015 Printers Beheersjablonen Beleidsdefinities (ADMX-bestanden) opgehaald van de lokale computer. Configuratiescherm/Printers Beleid Instelling Dominerend groepsbeleidsobject Beperkingen van point-and-print Uitgeschakeld Printers Like I said, I have been trying to figure this out for the past few hours or so without any result, so you are my last hope. Any help is appreciated.

  Read the article

• Laptop keyboard stopped functioning properly

  - by galdikas

  Basically today out of blue my laptop keyboard started acting up. For example I press "s" but I see "`s" on the screen. Some keys don't work at all. And the weird thing is it keeps changing, in a sense that for example in the morning I press "s" and I get "`s", then few hours later "s" works correctly.. but pressing some other key output multiple characters. Then sometimes it spontaneously will start outputting some character onto any input field that is available as soon as I click on it to gain focus. And it will just keep on going and going, as if I keep a button pressed (which I don't). At first I thought this was a virus, but I have a dual boot of Windows 7 and Ubuntu, and I get same problem on both. I even tried to boo live CD, and still had same problem. Anyone had this kind of problem? It's a Toshiba Satellite c660-258. It is around year old, but quite well kept. Never spilled anything on it, or dropped it. And my wireless USB keyboard works perfectly on it (appart from the spontaneous character inputs, which I can stop by hitting NUM LOCK key)

  Read the article

< Previous Page | 622 623 624 625 626 627 628 629 630 631 632 633  | Next Page >