Search Results

Search found 20904 results on 837 pages for 'disk performance'.

Page 628/837 | < Previous Page | 624 625 626 627 628 629 630 631 632 633 634 635  | Next Page >

• Computer suddenly won't boot - stops at a flashing prompt

  - by Dave M G

  I have been running Ubuntu on my computer for a long time, and I have been using 11.10 since it became available in October. Suddenly, this morning, when I rebooted, the computer would not reach the log in screen. I go through the standard POST boot sequence, and I also get a splash screen for my Nvidia graphics card, so at least most of the hardware seems to be working. After that, all I get is a flashing text prompt - one blinking white underline character on a screen that is otherwise completely blank. I don't think it is even reaching GRUB. No key input is possible. I have tried various key combinations to try and initiate some kind of interface, be it command line or anything else. The only key combination that works is [CTRL]+[ALT]+[Delete] to reboot. I realize this is likely to be a hardware problem, but it could be an Ubuntu problem(?), so I'm hoping for a specific set of troubleshooting steps so I can diagnose and repair this issue. My current suspicion is that one of the drives in my 2 disk software RAID has failed (even though they should be too new for that). However, this computer is critical to my work, so I'd like to invite advice on any possibilities so as to waste as little time as possible in fixing this machine.

  Read the article

• SSD on USB 3.0 doesnt always mount

  - by juergen

  I would like to ask you for some support for this issue. The SSD I use is apparently slightly damaged. Atm it shows this popular Corsair Series 3 problem. symptom: the disk is working for some minutes and then just suddenly stops. Two months ago it worked like a charm. This was my boot device in these days. So now I still need to copy some data out of the device which leads me to my question. Usually the SSD is working again for some minutes, when i unplug and replug its power. It gets detected by the system again and I can continue my backup. The problem on Ubuntu is, that it is not recognized again after two or three replugs. I have to reboot to bring it back. To specify this situation: when i unplug and replug my USB mouse before i reboot it is not recognized as well. So something seems to be wrong with the system also. my question: how do i fix this rebooting issue? I will post all the logs you need to analyse. The problem doesnt depend on the interface. I tried USB3.0, 2.0 and Sata already. Thank you! cheers my system: Ubuntu 11.10, Gigabyte G41MT-S2P, Intel E6750 Corsair Force Series 2 - F120, Digitus USB 3.0 Adapter, USB 3.0 interface card

  Read the article

• Blogger Blog Takes Ages to Load after Custom Domain Redirection

  - by abhisek

  I recently bought a custom domain for a blogger blog (technabled.com) I have for sometime now. I followed the instructions on blogger's documentation. I added A-name records and CNAME records with my DNS provider. But, now, some strange problems are cropping up. If I connect to my broadband network and then ping technabled.com, it times out. Then, if I visit the webpage, which takes almost one and half minutes to load, and then if I ping technabled.com, it shows expected result. This is not just me. I asked some of the regular readers, who reported the same issue. As a result of this, I am losing a lot of visits. What is stranger is that the subsequent visits to the blog is faster. I have checked with a few online services to test the performance. WebPageTest seems to say the same thing: http://www.webpagetest.org/result/110117_1N_7PE/ (please see the First View / Repeat View time) Also, the pagespeed score is not that bad. So I am ruling out other possibilities. I am at a loss as to what I should do to find a solution. Help is much appreciated. :)

  Read the article

• Welcome!

  - by mannamal

  Welcome to the Oracle Big Data Connectors blog, which will focus on posts related to integrating data on a Hadoop cluster with Oracle Database. In particular the blog will focus on best practices, usage notes, and performance tips for using Oracle Loader for Hadoop and Oracle Direct Connector for HDFS, which are part of Oracle Big Data Connectors. Oracle Big Data Connectors 1.0 also includes Oracle R Connector for Hadoop and Oracle Data Integrator Application Adapters for Hadoop. Oracle Loader for Hadoop: Oracle Loader for Hadoop loads data from Hadoop to Oracle Database. It runs as a MapReduce job on Hadoop to partition, sort, and convert the data into an Oracle-ready format, offloading to Hadoop the processing that is typically done using database CPUs. The data is thenloaded to the database by the Oracle Loader for Hadoop job (online load) or written out as Oracle Data Pump files for load and access later (offline load) with Oracle Direct Connector for HDFS. Oracle Direct Connector for HDFS: Oracle Direct Connector for HDFS is a connector for high speed access of data on HDFS from Oracle Database. With this connector Oracle SQL can be used to directly query data on HDFS. The data can be Oracle Data Pump files generated by Oracle Loader for Hadoop or delimited text files. The connector can also be used to load data into the database using SQL.

  Read the article

• How can I get my monitor's maximum resolution without the proprietary AMD graphic driver installed?

  - by Venki

  I am using Ubuntu 14.04. I have an AMD Radeon 5570 HD graphic card. Actually, the default open source REDWOOD drivers aren't allowing me to choose my monitor's maximum screen resolution(which is 1366 x 768). I just have two resolutions displayed which are 1024x768 and 800x600 . If I give the command : xrandr -s 1366x768 then the output is: Size 1366x768 not found in available modes So just for the sake of getting 1366x768 resolution I am forced to install the proprietary graphic driver that AMD gives me from its site. But if I install it(which itself is quite a problem-prone process), I undergo a lot of 'inconvenience'. Sometimes after an OS update, the driver crashes unity. Then I will have to uninstall that driver from a tty and google around for a solution. Also I encounter screen tearing problems occasionally. In addition I also cant see my login screen(See this question which states this particular problem). The main problem is AMD does not update its driver as quick as Ubuntu updates its OS. This is quite irritating. So, I want the maximum resolution(and performance) that my graphics card and monitor can give me without installing the 'problematic' proprietary graphic card driver that AMD gives. Is this possible? Suggestions please. Thanks in advance. PS :- More system specs details:- Intel i3 2100 processor AMD P8H61-M PLUS2 motherboard AMD Radeon 5570 HD graphic card DELL monitor (BTW, Thank you for reading through my elaborate description!)

  Read the article

• StreamInsight V2.0 Released!

  - by Roman Schindlauer

  The StreamInsight Team is proud to announce the release of StreamInsight V2.0! This is the version that ships with SQL 2012, and as such it has been available through Connect to SQL CTP customers already since December. As part of the SQL 2012 launch activities, we are now making V2.0 available to everyone, following our tradition of providing a separate download page. StreamInsight V2.0 includes a number of stability and performance fixes over its predecessor V1.2. Moreover it introduces a dependency on the .NET Framework 4.0, as well as on SQL 2012 license keys. For these reasons, we decided to bump the major version number, even though V2.0 does not add new features or API surface. It can be regarded a stepping stone to the upcoming release 2.1 which will contain significantly new APIs (that will depend on .NET 4.0). Head over here to download StreamInsight V2.0. The updated Books Online can be found here. Update: For instructions on how to make your existing application work against the new bits without recompilation, see here. Regards, The StreamInsight Team

  Read the article

• Randomly and uniquely iterating over a range

  - by Synetech

  Say you have a range of values (or anything else) and you want to iterate over the range and stop at some indeterminate point. Because the stopping value could be anywhere in the range, iterating sequentially is no good because it causes the early values to be accessed more often than later values (which is bad for things that wear out), and also because it reduces performance since it must traverse extra values. Randomly iterating is better because it will (on average) increase the hit-rate so that fewer values have to be accessed before finding the right one, and also distribute the accesses more evenly (again, on average). The problem is that the standard method of randomly jumping around will result in values being accessed multiple times, and has no automatic way of determining when each value has been checked and thus the whole range has been exhausted. One simplified and contrived solution could be to make a list of each value, pick one at random, then remove it. Each time through the loop, you pick one fromt he set of remaining items. Unfortunately this only works for small lists. As a (forced) example, say you are creating a game where the program tries to guess what number you picked and shows how many guess it took. The range is between 0-255 and instead of asking Is it 0? Is it 1? Is it 2?…, you have it guess randomly. You could create a list of 255 numbers, pick randomly and remove it. But what if the range was between 0-232? You can’t really create a 4-billion item list. I’ve seen a couple of implementations RNGs that are supposed to provide a uniform distribution, but none that area also supposed to be unique, i.e., no repeated values. So is there a practical way to randomly, and uniquely iterate over a range?

  Read the article

• Have you Been Missing the 'About This Record' Functionality on the Customer Form...?

  - by MargaretW

  Do you have fond memories of the 'Help -> About This Record'  functionality that used to be available in the old Customer form - when it was a form, and not a java html screen?  Back in Release 11i, we had the ability to identify when the customer record had last been updated and by whom.  When some forms were replaced by Java HTML screens, you could identify some of this information via the 'About this Page' hyperlink at the bottom left hand corner of the HTML page.  You could enable this by enabling the FND: Diagnostics profile option, but many customers found this had an adverse effect on performance and additionally was not user-friendly.   Our customers tell us that this feature was widely used to identify owner/update information in many business processes, including auditing, customer entry/update, research and testing.  There have been various efforts to revert this feature by customising java pages, but this was not fully successful in some cases.  Oracle Support is happy to announce that this functionality has now been included in the Customer screens in Release 12.2 onwards.   You will be able to query the record history at customer level, at site level, at site address levels and for all tabs relating to the customer. Simply click on the 'Record History' icon, available in the Record History column on a summary screen, or via the same icon on the individual detail screen to display the following information: Last Updated Date: Last Updated By Creation Date Created By Last Update Login

  Read the article

• Oracle Solaris 11.1 available today

  - by user12611852

  Today Oracle is pleased to announce availability of Oracle Solaris 11.1. Download Solaris 11.1 Order Solaris 11.1 media kitExisting customers can quickly and simply update using the network based repository Highlights include: 8x faster database startup and shutdown and online resizing of the database SGA with a new optimized shared memory interface between the database and Oracle Solaris 11.1 Up to 20% throughput increases for Oracle Real Application Clusters by offloading lock management into the Oracle Solaris kernel Expanded support for Software Defined Networks (SDN) with Edge Virtual Bridging enhancements to maximize network resource utilization and manage bandwidth in cloud environments 4x faster Solaris Zone updates with parallel operations shorten maintenance windows New built-in memory predictor monitors application memory use and provides optimized memory page sizes and resource location to speed overall application performance. Learn more and share these valuable tools with your customers to enable them to move to Oracle Solaris 11.1 quickly. Many customers wait for the first update --now is the time to encourage them to install Oracle Solaris 11.1. Oracle Solaris 11.1 Data Sheet  What's New in Oracle Solaris 11.1 Oracle Solaris 11.1 FAQs Oracle Solaris 11 .1 Customer Presentation Oracle Solaris 11.1 is recommended for all SPARC T4 Systems and will soon be available preinstalled.

  Read the article

• Oracle Day 2012

  - by Mark Hesse

  Normal.dotm 0 0 1 133 760 Sun Microsystems 6 1 933 12.0 0 false 18 pt 18 pt 0 0 false false false /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} As a keynote speaker at this year’s Oracle Day 2012, “Your Vision, Engineered” I had the honor and pleasure of speaking to a crowd of about 150 attendees about our recently released, fourth generation Exadata X3 In-Memory Machine in a presentation entitled “Oracle Exadata X3 - Transforming Data Management”. The general theme of the thirty-minute talk was how to improve performance, lower costs, and build the foundation for your cloud service platform using Exadata. Since its introduction in 2008, I’ve watched first-hand as Exadata has evolved from a data warehouse-only system to an OLTP and DW in-memory database machine capable of storing hundreds of terabytes of compressed user data in flash and main memory.  Many of my Exadata customers are now purchasing additional systems as they continue to standardize Oracle 11g deployments on the best database platform available.

  Read the article

• Managing many draw calls for dynamic objects

  - by codetiger

  We are developing a game (cross-platform) using Irrlicht. The game has many (around 200 - 500) dynamic objects flying around during the game. Most of these objects are static mesh and build from 20 - 50 unique Meshes. We created seperate scenenodes for each object and referring its mesh instance. But the output was very much unexpected. Menu screen: (150 tris - Just to show you the full speed rendering performance of 2 test computers) a) NVidia Quadro FX 3800 with 1GB: 1600 FPS DirectX and 2600 FPS on OpenGL b) Mac Mini with Geforce 9400M 256mb: 260 FPS in OpenGL Now inside the game in a test level: (160 dynamic objects counting around 10K tris): a) NVidia Quadro FX 3800 with 1GB: 45 FPS DirectX and 50 FPS on OpenGL b) Mac Mini with Geforce 9400M 256mb: 45 FPS in OpenGL Obviously we don't have the option of mesh batch rendering as most of the objects are dynamic. And the one big static terrain is already in single mesh buffer. To add more information, we use one 2048 png for texture for most of the dynamic objects. And our collision detection hardly and other calculations hardly make any impact on FPS. So we understood its the draw calls we make that eats up all FPS. Is there a way we can optimize the rendering, or are we missing something?

  Read the article

• Package manager doesn't work anymore

  - by LukaD

  I'm using ubuntu 10.10 and recently my package manager has stopped working because of some problems with dependencies or something. I can't upgrade, install or uninstall anything at all. This is a huge problem. I couldn't find a solution to this with google so I'm asking here for help. This is what apt-get -f install outputs LANG=en_US.UTF-8 sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done The following package was automatically installed and is no longer required: firefox-4.0-core Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0B of additional disk space will be used. Setting up openjdk-6-jre-headless (6b20-1.9.5-0ubuntu1) ... update-alternatives: error: alternative path /usr/lib/jvm/java-6-openjdk/jre/bin/java doesn't exist. dpkg: error processing openjdk-6-jre-headless (--configure): subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: openjdk-6-jre-headless E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• VirtualBox 4.0.10 is now available for download

  - by user12611829

  VirtualBox 4.0.10 has been released and is now available for download. You can get binaries for Windows, OS X (Intel Mac), Linux and Solaris hosts at http://www.virtualbox.org/wiki/Downloads The full changelog can be found here. The high points for the 4.0.10 maintenance release include .... GUI: fixed disappearing settings widgets on KDE hosts (bug #6809) Storage: fixed hang under rare circumstances with flat VMDK images Storage: a saved VM could not be restored under certain circumstances after the host kernel was updated Storage: refuse to create a medium with an invalid variant Snapshots: none of the hard disk attachments must be attached to another VM in normal mode when creating a snapshot USB: fixed occasional VM hangs with SMP guests USB: proper device detection on RHEL/OEL/CentOS 5 guests ACPI: force the ACPI timer to return monotonic values for improve behavior with SMP Linux guests RDP: fixed screen corruption under rare circumstances rdesktop-vrdp: updated to version 1.7.0 OVF: under rare circumstances some data at the end of a VMDK file was not written during export Mac OS X hosts: Lion fixes Mac OS X hosts: GNOME 3 fix Linux hosts: fixed VT-x detection on Linux 3.0 hosts Linux hosts: fixed Python 2.7 bindings in the universal Linux binaries Windows hosts: fixed leak of thread and process handles Windows Additions: fixed bug when determining the extended version of the Guest Additions Solaris Additions: fixed installation to 64-bit Solaris 10u9 guests Linux Additions: RHEL6.1/OL6.1 compile fix Linux Additions: fixed a memory leak during VBoxManage guestcontrol execute Technocrati Tags: Sun Virtualization VirtualBox var sc_project=1193495; var sc_invisible=1; var sc_security="a46f6831";

  Read the article

• Bootable dvd installs ubuntu in one computer but not in other...Why? [closed]

  - by SAM

  Possible Duplicate: My computer boots to a black screen, what options do I have to fix it? I have 2 computers, Windows 7 Intel. On one computer Ubuntu boot-able DVD (AMD 64) works properly. But on other computer the same DVD boots OK but when clicked on "Install Ubuntu" a blank screen with blinking cursor(_) appears and it continues just blinking forever. What problem can be there in computer 2? Can it be DVD reader's problem? (Both computers have LG DVD RW) Can there be any problem in DVD? Computer 1 specs: Pentium D 3 GHz Windows 7 32-bit not a 64bit-capable processor still Ubuntu 64bit trial/installer runs... Computer 2 specs: Core i7 2700k Windows 7 32-bit nvidia gtx 560 graphicsCard ...BIG BOSS... still can't run the setup/trial/disk-check/memory-test ?!?!? Is it the problem of graphics card ?!? I also tried burning other dvd which has the same behavour.... AND yes the dvd name is: ubuntu-12.04.1-dvd-amd64.iso Any help is appreciated.

  Read the article

• Join me at OpenWorld 2012

  - by Michael Palmeter (Exalogic PM)

  For those of you that will be coming out to Oracle OpenWorld 2012 next ween in San Francisco, I encourage you to take a few minutes on Monday afternoon to come to my session on Oracle Exalogic. Click here for more info: CON9416 - Oracle Exalogic 2.0: Ready-to-Deploy, Mission-Critical Private Cloud My session is one of the first on Oracle Exalogic (one of the privileges of running Product Management for the product) and with that in mind it is going to be something of an introduction and overview.  The material I will present is tailored for C-level customers that are interested in the product but haven't really been exposed to it in any detail.  This is essentially the same sort of presentation I give to customers that visit Oracle HQ, and it provides context for all of the other excellent sessions that follow. During this session I will talk about: The macro-trends in the industry that are driving Exalogic strategy - IT-as-a-Service and infrastructure convergence The first two years of market success with Exalogic - who's bought it, why, and what their results have been Exalogic key features and differentiation - why it's the best possible platform for Oracle business applications and middleware How Exalogic performs, and why it is the hands-down performance champion of Enterprise cloud platforms If you haven't signed up yet, please do.  I'd love to see you there.

  Read the article

• Ubuntu 12.04 still slow at mounting internal filesystem

  - by Matthew Goson

  I'm using Toshiba laptop with this configuration: - CPU: Core i5, 2.4GHz - RAM: 4GB - Graphics card: Intel - Hard disk: 500GB SATA I installed Ubuntu 12.04 64bit and got the same issue with this guy Very slow boot due to mounting filesytem, I tried all suggestions there but the slow boot issue still here. Here's a part of my dmesg: [ 2.041015] usbhid: USB HID core driver [ 2.101378] usb 1-1.6: new full-speed USB device number 5 using ehci_hcd [ 2.137980] atl1c 0000:04:00.0: version 1.0.1.0-NAPI [ 2.779080] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 22.822597] udevd[381]: starting version 175 [ 22.837954] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.850837] lp: driver loaded but no devices found [ 23.003822] Adding 7079096k swap on /dev/sda7. Priority:-1 extents:1 across:7079096k [ 23.407915] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 23.408153] mei 0000:00:16.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 23.408160] mei 0000:00:16.0: setting latency timer to 64 [ 23.408211] mei 0000:00:16.0: irq 44 for MSI/MSI-X [ 23.433196] [drm] Initialized drm 1.1.0 20060810 Additional information: my sda1 is a primary NTFS partition, sda2 is a primary ext4 partition which I installed Ubuntu onto. Other partitions are inside an extended partition.

  Read the article

• Kubuntu apt-get -f install error

  - by ShaggyInjun

  I am seeing an error while running apt-get -f install. Can somebody help me out .. venkat@ubuntu:~/Downloads$ sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libjack-jackd2-0 Suggested packages: jackd2 The following packages will be upgraded: libjack-jackd2-0 1 upgraded, 0 newly installed, 0 to remove and 256 not upgraded. 109 not fully installed or removed. Need to get 0 B/197 kB of archives. After this operation, 3,072 B of additional disk space will be used. Do you want to continue [Y/n]? Y (Reading database ... 274641 files and directories currently installed.) Preparing to replace libjack-jackd2-0 1.9.8~dfsg.1-1ubuntu1 (using .../libjack-jackd2- 0_1.9.8~dfsg.2-1precise1_amd64.deb) ... Unpacking replacement libjack-jackd2-0 ... dpkg: error processing /var/cache/apt/archives/libjack-jackd2-0_1.9.8~dfsg.2- 1precise1_amd64.deb (--unpack): './usr/share/doc/libjack-jackd2-0/buildinfo.gz' is different from the same file on the system dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/libjack-jackd2-0_1.9.8~dfsg.2-1precise1_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Join Us!! Live Webinar: Using UPK for Testing

  - by Di Seghposs

  Create Manual Test Scripts 50% Faster with Oracle User Productivity Kit  Thursday, March 29, 2012 11:00 am – 12:00 pm ET Click here to register now for this informative webinar. Oracle UPK enhances the testing phase of the implementation lifecycle by reducing test plan creation time, improving accuracy, and providing the foundation for reusable training documentation, application simulations, and end-user performance support—all critical assets to support an enterprise application implementation. With Oracle UPK: Reduce manual test plan development time - Accelerate the testing cycle by significantly reducing the time required to create the test plan. Improve test plan accuracy - Capture test steps automatically using Oracle UPK and import those steps directly to any of these testing suites eliminating many of the errors that occur when writing manual tests. Create the foundation for reusable assets - Recorded simulations can be used for other lifecycle phases of the project, such as knowledge transfer for training and support. With its integration to Oracle Application Testing Suite, IBM Rational, and HP Quality Center, Oracle UPK allows you to deploy high-quality applications quickly and effectively by providing a consistent, repeatable process for gathering requirements, planning and scheduling tests, analyzing results, and managing  issues. Join this live webinar and learn how to decrease your time to deployment and enhance your testing plans today! 

  Read the article

• Storing editable site content?

  - by hmp

  We have a Django-based website for which we wanted to make some of the content (text, and business logic such as pricing plans) easily editable in-house, and so we decided to store it outside the codebase. Usually the reason is one of the following: It's something that non-technical people want to edit. One example is copywriting for a website - the programmers prepare a template with text that defaults to "Lorem ipsum...", and the real content is inserted later to the database. It's something that we want to be able to change quickly, without the need to deploy new code (which we currently do twice a week). An example would be features currently available to the customers at different tiers of pricing. Instead of hardcoding these, we read them from database. The described solution is flexible but there are some reasons why I don't like it. Because the content has to be read from the database, there is a performance overhead. We mitigate that by using a caching scheme, but this also adds some complexity to the system. Developers who run the code locally see the system in a significantly different state compared to how it runs on production. Automated tests also exercise the system in a different state. Situations like testing new features on a staging server also get trickier - if the staging server doesn't have a recent copy of the database, it can be unexpectedly different from production. We could mitigate that by committing the new state to the repository occasionally (e.g. by adding data migrations), but it seems like a wrong approach. Is it? Any ideas how best to solve these problems? Is there a better approach for handling the content that I'm overlooking?

  Read the article

• Ubuntu 12.04 Very slow especially with Android Studio

  - by Dew

  I have an old laptop with the following specification: Memory: 485 MiB, Processor: Genuine intel CPU T2300 @ 1.66 GHz ×2, OS Type: 32 bit, Disk: 78.1 GB, I installed on it Ubuntu 12.04 LTS and I noticed that the overall system is very slow in responding. I tried to search about that in the internet and I found some articles talking about how to make Ubuntu 12.04 LTS run fast I applied all what they said including download LXDE desktop environment and then nothing different in the system response time. Then I need to develop some android applications so, I download Android Studio (Beta) 0.8.6. The problem became worse than before whenever I tried to open the Android Studio the screen is frozen for some minutes then it took time to download the projects and initialize the work space also, when I tried to move the cursor he is move very slowly. When I tried to run my first application on the AVD it took three hours and still not run yet. I delete the Android Studio and install it again several times, I was trying to solve the problem but still nothing change. Please if you have any suggestions that may help me make my laptop and Android Studio work faster I will appreciate it for you. Thank you in advance.

  Read the article

• How will closures in Java impact the Java Community?

  - by Ryan Delucchi

  It is one of the most talked about features planned for Java: Closures. Many of us have been longing for them. Some of us (including I) have grown a bit impatient and have turned to scripting languages to fill the void. But, once closures have finally arrived to Java: how will they effect the Java Community? Will the advancement of VM-targetted scripting languages slow to a crawl, stay the same, or acclerate? Will people flock to the new closure syntax, thus turning Java code-bases all-around into more functionally structured implementations? Will we only see closures sprinkled in Java throughout? What will be the effect on tool/IDE support? How about performance? And finally, what will it mean for Java's continued adoption, as a language, compared with other languages that are rising in popularity? To provide an example of one of the latest proposed Java Closure syntax specs: public interface StringOperation { String invoke(String s); } // ... (new StringOperation() { public invoke(String s) { new StringBuilder(s).reverse().toString(); } }).invoke("abcd"); would become ... String reversed = { String s => new StringBuilder(s).reverse().toString() }.invoke("abcd"); [source: http://tronicek.blogspot.com/2007/12/closures-closure-is-form-of-anonymous_28.html]

  Read the article

• Pipe an infinite stream to internal loop?

  - by Sh3ljohn

  I've seen a lot of things about redirecting stdout to a TCP socket, but no real example of how to do it in practice, specifically when the output stream generated by the first "command" never ends. To talk about something concrete, let's take programs like servers that typically output their log endlessly to stdout (well, as long as they run). If you redirect the output to a log file on the disk, then this file is always open (therefore not readable by others?) and grows infinitely, which eventually is going to cause problems. This might be a nood question, but I don't know what it does or how to do it so. How to redirect the output of a command to the internal loop? I want to make sure that data is sent EVERY time something is written to stdout, and that the pipe won't wait for the command to end (never happens ideally!). Is that right? If 2 is true, is there a buffer system to send chunks of data once it reaches a certain size only? Could you give me concrete command line examples to do the above? Thanks in advance

  Read the article

• Using C++ but not using the language's specific features, should switch to C?

  - by Petruza

  I'm developing a NES emulator as a hobby, in my free time. I use C++ because is the language I use mostly, know mostly and like mostly. But now that I made some advance into the project I realize I'm not using almost any specific features of C++, and could have done it in plain C and getting the same result. I don't use templates, operator overloading, polymorphism, inheritance. So what would you say? should I stay in C++ or rewrite it in C? I won't do this to gain in performance, it could come as a side effect, but the idea is why should I use C++ if I don't need it? The only features of C++ I'm using is classes to encapsulate data and methods, but that can be done as well with structs and functions, I'm using new and delete, but could as well use malloc and free, and I'm using inheritance just for callbacks, which could be achieved with pointers to functions. Remember, it's a hobby project, I have no deadlines, so the overhead time and work that would require a re-write are not a problem, might be fun as well. So, the question is C or C++?

  Read the article

• Android - big game universe

  - by user1641923

  I am new to an Android development, though I have much experience with Java, C++, PHP programming and a bit experience with vector graphics too (basic 3d Studio Max, Flash, etc). I am starting to work on an Android game. It is going to be a 2D space shooter/RPG, and I am not going to use any game engines and any 3D party libs. I really want to create a very large game universe, or even pseudo-infinite (without visible borders, as if it were a 2D projection of a sphere). It should include 10-12 clusters of 7-8 planets/other space objects and random amount of single asteroids/comets, which player can interact with and also not interactive background. I am looking for a least complicated aproach to create such a universe. My current ideas are: Simply create bitmaps with space scenery background so that they can be tiled seamlessly repeated and construct my 2D universe of this tiles, then place interactive objects (planets, other spaceships) on it. Using vector graphics. I would have a solid color background, some random background objects and gradients here and there. My problems here: Lack of knowledge of how well vector graphics is integrated in Android. Performance? Memory usage? Does Android manage big bitmaps well? Do all of the bitmaps have to be in memory during all game process? I am interested in technical details regarding each of the ideas and a suggestion, which I should go with.

  Read the article

• is wisdom of what happens 'behind scenes' (in compiler, external DLLs etc.) important?

  - by I_Question_Things_Deeply

  I have been a computer-fanatic for almost a decade now. I've always loved and wondered how computers work, even from the purest, lowest hardware level to the very smallest pixel on the screen, and all the software around that. That seems to be my problem though ... as I try to write code (I'm pretty fluent at C++) I always sit there enormous amounts of time in front of a text-editor wondering how every line, statement, datum, function, etc. will correspond to every Assembly and machine instruction performed to do absolutely everything necessary for the kernel to allocate memory to run my compiled program, and all of the other hardware being used as well. For example ... I would write cout << "Before memory changed" << endl; and run the debugger to get the Assembly for this, and then try and reverse disassemble the Assembly to machine code based on my ISA, and then research every .dll, library file, linked library, linking process, linker source code of the program, the make file, the kernel I'm using's steps of processing this compilation, the hardware's part aside from the processor (e.g. video card, sound card, chipset, cache latency, byte-sized registers, calling convention use, DDR3 RAM and disk drive, filesystem functioning and so many other things). Am I going about programming wrong? I mean I feel I should know everything that goes on underneath English syntax on a computer program. But the problem is that the more I research every little thing the less I actually accomplish at all. I can never finish anything because of this mentality, yet I feel compelled to know everything... what should I do?

  Read the article

< Previous Page | 624 625 626 627 628 629 630 631 632 633 634 635  | Next Page >