Search Results

Search found 1608 results on 65 pages for 'distro recommendation'.

Page 63/65 | < Previous Page | 59 60 61 62 63 64 65  | Next Page >

  • Agile Awakenings and the Rules of Agile

    - by Robert May
    For those that care, you can read my history of management and technology to understand why I think I’m qualified to talk about this at all.  It’s boring, so feel free to skip it. Awakenings I first started to play around with the idea of “agile” in 2004 or 2005.  I found a book on the Rational Unified Process that I thought was good, and attempted to implement parts of it.  I thought I was agile, but really, it wasn’t.   I still didn’t understand the concept of a team.  I still wanted to tell the team what to do and how to get it done.  I still thought I was smarter than the team. After that job, I started work on another project and began helping that team.  The first few months were really rough.  We were implementing Scrum, which was relatively new to everyone on the team, and, quite frankly, I was doing a poor job of it.  I was trying to micro-manage every aspect of the teams work, and we were all miserable. The moment of change came when the senior architect bailed on the project.  His comment to me was: “This isn’t Agile.  Where are the stand-ups?  Where are the stories?”  He was dead on, and I finally woke up.  I finally realized that I was the problem!  I wasn’t trusting the team.  I wasn’t helping the team.  I was being a manager. Like many (most?), I was claiming to be Agile and use Scrum, but I wasn’t in fact following the rules Scrum.  Since then, I’ve done a lot of studying, hands on practice, coaching of many different teams, and other learning around Scrum, and I have discovered that Scrum has some rules that must be followed for success, even though the process is about continuous improvement. I’ve been practicing Scrum right for about 4 years now and have helped multiple teams implement it successfully, so what you’re about to get is based on experience, rather than just theory. The Rules of Scrum In my experience, what I’ve found is that most companies that claim to be doing Scrum or Agile are actually NOT doing either.  This stems largely because they think that they can “adopt the rules of Agile that fit their organization.”  Sadly, many of them think that this means they can adopt iterations (sprints) and not much else.  Either that, or they think they can do whatever they want, or were doing before, and call it Scrum.  This is simply not true. Here are some rules that must be followed for you to really be doing Scrum.  I’ll go into detail on each one of these posts in future blog posts and update links here.  My intent is that this will help other teams implementing scrum to see more success. Agile does not allow you to do whatever you want A Product Owner is required A ScrumMaster is required The team must function as a Team, and QA must be part of the team Support from upper management is required A prioritized product backlog is required A prioritized sprint backlog is required Release planning is required Complete spring planning is required Showcases are required Velocity must be measured Retrospectives are required Daily stand-ups are required Visibility is absolutely required For now, I think that’s enough, although I reserve the right to add more.  If you’re breaking any of these rules, you’re probably not doing Scrum.  There are exceptions to these rules, but until you have practiced Scrum for a while, you don’t know what those exceptions are. Breaking the Rules Many teams break these rules because they are the ones that expose the most pain.  Scrum is not Advil.  It’s not intended to mask the pain, its intended to cure it.  Let me explain that analogy a bit more.  Recently, my 7 year old son broke his arm, quite severely (see the X-Ray to the right).  That caused him a great deal of pain.  We went first to one doctor, and after viewing the X-Ray, they determined that there was no way that they’d cast the arm at their location.  It was simply too bad of a break for them to deal with.  They did, however, give him some Advil for the pain and put a splint on his arm to stabilize the broken bones.  Within minutes, he was feeling much better.  Had we been stupid, we could have gone home and he’d have been just as happy as ever . . . until the pain medication wore off or one of his siblings touched the splint.  Then, all of that pain would come right back to the top.  Sure, he could make it go away by just taking more Advil and moving the splint out of the way, but that wasn’t going to fix the problem permanently. We ended up in an emergency room with a doctor who could fix his arm.  However, we were warned that the fix was going to be VERY painful, and it was.  Even with heavy sedation (Propofol), my son was in enough pain that he squirmed and wiggled trying to get his arm away from the doctor.  He had to endure this pain in order to have a functional arm. But the setting wasn’t the end.  He had to have several casts, had to have it re-broken once, since the first setting didn’t take and finally was given a clean bill of health. Agile implementation is much like this story.  Agile was developed as a result of people recognizing that the development methodologies that were currently in place simply were ineffective.  However, the fix to the broken development that’s been festering for many years is not painless.  Many people start Agile thinking that things will be wonderful.  They won’t!  Agile is about visibility, and often, it brings great pain to surface.  It causes all of the missed deadlines, the cowboy coders, the coasters, the micro-managers, the lazy, and all of the other problems that are really part of your development process now to become painfully visible to EVERYONE.  Many people don’t like this exposure.  Agile will make the pain better, but not if you remove the cast (the rules above) prematurely and start breaking the rules that expose the most pain.  The healing will take time and is not instant (like Advil).  Figuring out what the true source of pain and fixing it is very valuable to you, your team, and your company.  Remember as you’re doing this that Agile isn’t the source of the pain, it’s really just exposing it.  Find the source. My recommendation is that ALL of these rules are followed for a minimum of six months, and preferably for an entire year, before you decide to break any of these rules.  Get a few good releases under your belt.  Figure out what your velocity is and start firing as a team.  Chances are, after you see agile really in action, you won’t want to break the rules because you’ll see their value. More Reading Jean Tabaka recently published a list of 78 Things I Have Learned in 6 Years of Agile Coaching.  Highly recommended. Technorati Tags: Agile,Scrum,Rules

    Read the article

  • Learning AngularJS by Example – The Customer Manager Application

    - by dwahlin
    I’m always tinkering around with different ideas and toward the beginning of 2013 decided to build a sample application using AngularJS that I call Customer Manager. It’s not exactly the most creative name or concept, but I wanted to build something that highlighted a lot of the different features offered by AngularJS and how they could be used together to build a full-featured app. One of the goals of the application was to ensure that it was approachable by people new to Angular since I’ve never found overly complex applications great for learning new concepts. The application initially started out small and was used in my AngularJS in 60-ish Minutes video on YouTube but has gradually had more and more features added to it and will continue to be enhanced over time. It’ll be used in a new “end-to-end” training course my company is working on for AngularjS as well as in some video courses that will be coming out. Here’s a quick look at what the application home page looks like: In this post I’m going to provide an overview about how the application is organized, back-end options that are available, and some of the features it demonstrates. I’ve already written about some of the features so if you’re interested check out the following posts: Building an AngularJS Modal Service Building a Custom AngularJS Unique Value Directive Using an AngularJS Factory to Interact with a RESTful Service Application Structure The structure of the application is shown to the right. The  homepage is index.html and is located at the root of the application folder. It defines where application views will be loaded using the ng-view directive and includes script references to AngularJS, AngularJS routing and animation scripts, plus a few others located in the Scripts folder and to custom application scripts located in the app folder. The app folder contains all of the key scripts used in the application. There are several techniques that can be used for organizing script files but after experimenting with several of them I decided that I prefer things in folders such as controllers, views, services, etc. Doing that helps me find things a lot faster and allows me to categorize files (such as controllers) by functionality. My recommendation is to go with whatever works best for you. Anyone who says, “You’re doing it wrong!” should be ignored. Contrary to what some people think, there is no “one right way” to organize scripts and other files. As long as the scripts make it down to the client properly (you’ll likely minify and concatenate them anyway to reduce bandwidth and minimize HTTP calls), the way you organize them is completely up to you. Here’s what I ended up doing for this application: Animation code for some custom animations is located in the animations folder. In addition to AngularJS animations (which are defined using CSS in Content/animations.css), it also animates the initial customer data load using a 3rd party script called GreenSock. Controllers are located in the controllers folder. Some of the controllers are placed in subfolders based upon the their functionality while others are placed at the root of the controllers folder since they’re more generic:   The directives folder contains the custom directives created for the application. The filters folder contains the custom filters created for the application that filter city/state and product information. The partials folder contains partial views. This includes things like modal dialogs used in the application. The services folder contains AngularJS factories and services used for various purposes in the application. Most of the scripts in this folder provide data functionality. The views folder contains the different views used in the application. Like the controllers folder, the views are organized into subfolders based on their functionality:   Back-End Services The Customer Manager application (grab it from Github) provides two different options on the back-end including ASP.NET Web API and Node.js. The ASP.NET Web API back-end uses Entity Framework for data access and stores data in SQL Server (LocalDb). The other option on the back-end is Node.js, Express, and MongoDB.   Using the ASP.NET Web API Back-End To run the application using ASP.NET Web API/SQL Server back-end open the .sln file at the root of the project in Visual Studio 2012 or higher (the free Express 2013 for Web version is fine). Press F5 and a browser will automatically launch and display the application. Using the Node.js Back-End To run the application using the Node.js/MongoDB back-end follow these steps: In the CustomerManager directory execute 'npm install' to install Express, MongoDB and Mongoose (package.json). Load sample data into MongoDB by performing the following steps: Execute 'mongod' to start the MongoDB daemon Navigate to the CustomerManager directory (the one that has initMongoCustData.js in it) then execute 'mongo' to start the MongoDB shell Enter the following in the mongo shell to load the seed files that handle seeding the database with initial data: use custmgr load("initMongoCustData.js") load("initMongoSettingsData.js") load("initMongoStateData.js") Start the Node/Express server by navigating to the CustomerManager/server directory and executing 'node app.js' View the application at http://localhost:3000 in your browser. Key Features The Customer Manager application certainly doesn’t cover every feature provided by AngularJS (as mentioned the intent was to keep it as simple as possible) but does provide insight into several key areas: Using factories and services as re-useable data services (see the app/services folder) Creating custom directives (see the app/directives folder) Custom paging (see app/views/customers/customers.html and app/controllers/customers/customersController.js) Custom filters (see app/filters) Showing custom modal dialogs with a re-useable service (see app/services/modalService.js) Making Ajax calls using a factory (see app/services/customersService.js) Using Breeze to retrieve and work with data (see app/services/customersBreezeService.js). Switch the application to use the Breeze factory by opening app/services.config.js and changing the useBreeze property to true. Intercepting HTTP requests to display a custom overlay during Ajax calls (see app/directives/wcOverlay.js) Custom animations using the GreenSock library (see app/animations/listAnimations.js) Creating custom AngularJS animations using CSS (see Content/animations.css) JavaScript patterns for defining controllers, services/factories, directives, filters, and more (see any JavaScript file in the app folder) Card View and List View display of data (see app/views/customers/customers.html and app/controllers/customers/customersController.js) Using AngularJS validation functionality (see app/views/customerEdit.html, app/controllers/customerEditController.js, and app/directives/wcUnique.js) More… Conclusion I’ll be enhancing the application even more over time and welcome contributions as well. Tony Quinn contributed the initial Node.js/MongoDB code which is very cool to have as a back-end option. Access the standard application here and a version that has custom routing in it here. Additional information about the custom routing can be found in this post.

    Read the article

  • Flashing your Windows Phone Dummies

    - by Martin Hinshelwood
    The rate at which vendors release new updates for the HD2 is ridiculously slow. You have to wait for Microsoft to release the new OS, then you wait for HTC to build it into a ROM, and then you have to wait up to 6 months for your operator to badly customise it for their network. Once Windows Phone 7 is released this problem should go away as Microsoft is likely to be able to update the phone over the air, but what do we do until then? I want Windows Mobile 6.5.5 now!   I’m an early adopter. If there is a new version of something then that’s the version I want. As long as you accept that you are using something on a “let the early adopter beware” and accept that there may be bugs, sometimes serious crippling bugs the go for it. Note that I won't be responsible if you end up bricking your phone, unlocking or flashing your radio or ROM can be risky. If you follow the instructions then you should be fine, I've flashed my phones (SPV, M300, M1000, M2000, M3100, TyTN, TyTN 2, HD2) hundreds of times without any problems! I have been using Windows Mobile 6.5.5 before it was called 6.5.5 and for long enough that I don’t even remember when I first started using it. I was using it on my HTC TyTN 2 before I got an HD2 a couple of months before Christmas, and the first custom ROM’s for the HD2 were a couple of months after that. I always update to the latest ROM that I like, and occasionally I go back to the stock ROM’s to have a look see, but I am always disappointed. Terms: Soft Reset: Same as pulling out the battery, but is like a reboot for your phone Hard Reset: Reinstalls the Operating system from the Image that is stored on it ROM: This is Image that is loaded onto your phone and it is used to reinstall your phone whenever you do a “hard reset”. Stock ROM: A ROM from the original vendor… So HTC Cook a ROM: Referring to Cooking a ROM is the process a ROM developer goes through to take all of the parts (OS, Drivers and Applications) that make up a running phone and compiling them into a ROM. ROM Kitchen: A place where you get an SDK and all the component parts of the phone: OD, Drivers and Application. There are usually lots of Tools for making it easier to compile and build the image. Flashing: The process of updating one of the layers of your phone with a new layer Bricked: This is what happens when flashing goes wrong. Your phone is now good for only one thing… stopping paper blowing away in a windy place. You can “cook” you own ROM using one of the many good “ROM Kitchens” or you can use a ROM built and tested by someone else. I have cooked my own ROM before, and while the tutorials are good, it is a lot of hassle. You can only Flash new ROM’s that are specifically for your phone only so find a ROM for your phone and XDA Developers is the best place to look. It has a forum based structure and you can find your phone quite easily. XDA Developer Forum Installing a new ROM does have its risks. In the past there have been stories about phones being “bricked” but I have not heard of a bricked phone for quite some years. if you follow the instructions carefully you should not have any problems. note: Most of the tools are written by people for whom English is not their first language to you will need concentrate hard to understand some of the instructions. Have you ever read a manual that was just literally translated from another language? Enough said… There are a number of layers on your phone that you will need to know about: SPL: This is the lowest level, like a BIOS on a PC and is the Operating Systems gateway to the hardware Radio: I think of this as the hardware drivers, and you will need a different Radio for CDMA than GSM networks ROM: This is like your Windows CD, but it is stored internally to the Phone. Flashing your phone consists of replacing one Image with another and then wiping your phone and automatically reinstall from the Image. Sometimes when you download an Image wither it is for a Radio or for ROM you only get a file called *.nbh. What do you do with this? Well you need an RUU application to push that Image to your phone. The RUU’s are different per phone, but there is a CustomRUU for the HD2 that will update your phone with any *.nbh placed in the same directory. Download and Instructions for CustomRUU #1 Flash HardSPL An SPL is kind of like a BIOS, and the default one has checks to make sure that you are only installing a signed ROM. This would prevent you from installing one that comes from any other source but the vendor. NOTE: Installing a HARD SPL invalidates your warranty so remember to Flash your phone with a “stock” vendor ROM before trying to send your phone in for repairs. Is the warranty reinstated when you go back to a stock ROM? I don’t know… Updating your SPL to a HardSPL effectively unlocks your phone so you can install anything you like. I would recommend the HardSPL2. Download and Instructions for HardSPL2 #2 Task29 One of the problems that has been seen on the HD2 when flashing new ROM’s is that things are left over from the old ROM. For a while the recommendation was to Flash a stock ROM first, but some clever cookies have come up with “Task29” which formats your phone first. After running this your phone will be blank and will only boot to the white HTC logo and no further. You should follow the instructions and reboot (remove battery) and hold down the “volume down” button while turning you HD2 on to enter the bootloader. From here you can run CustomRUU once the USB message appears. Download and Instructions for Task29 #2 Flash Radio You may need to play around with this one, there is no good and bad version and the latest is not always the best. You know that annoying thing when you hit “end call” on your phone and nothing happens? Well that's down to the Radio. Get this version right for you and you may even be able to make calls. From a Windows Mobile as well Download There are no instructions here, but they are the same as th ROM, but you use this *.nbh file. #3 Flash ROM If you have gotten this far then you are probably a pro by now Just download the latest ROM below and Flash to your phone. I have been really impressed by the Artemis line of ROM’s but it is no way the only choice. I like this one as the developer builds them as close to the stock ROM as possible while updating to the latest of everything. Download and Instructions for  Artemis HD2 vXX Conclusion While updating your ROM is not for the faint hearted it provides more options than the Stock ROM’s and quicker feature updates than waiting… Technorati Tags: WM6

    Read the article

  • Video on Architecture and Code Quality using Visual Studio 2012&ndash;interview with Marcel de Vries and Terje Sandstrom by Adam Cogan

    - by terje
    Find the video HERE. Adam Cogan did a great Web TV interview with Marcel de Vries and myself on the topics of architecture and code quality.  It was real fun participating in this session.  Although we know each other from the MVP ALM community,  Marcel, Adam and I haven’t worked together before. It was very interesting to see how we agreed on so many terms, and how alike we where thinking.  The basics of ensuring you have a good architecture and how you could document it is one thing.  Also, the same agreement on the importance of having a high quality code base, and how we used the Visual Studio 2012 tools, and some others (NDepend for example)  to measure and ensure that the code quality was where it should be.  As the tools, methods and thinking popped up during the interview it was a lot of “Hey !  I do that too!”.  The tools are not only for “after the fact” work, but we use them during the coding.  That way the tools becomes an integrated part of our coding work, and helps us to find issues we may have overlooked.  The video has a bunch of call outs, pinpointing important things to remember. These are also listed on the corresponding web page. I haven’t seen that touch before, but really liked this way of doing it – it makes it much easier to spot the highlights.  Titus Maclaren and Raj Dhatt from SSW have done a terrific job producing this video.  And thanks to Lei Xu for doing the camera and recording job.  Thanks guys ! Also, if you are at TechEd Amsterdam 2012, go and listen to Adam Cogan in his session on “A modern architecture review: Using the new code review tools” Friday 29th, 10.15-11.30 and Marcel de Vries session on “Intellitrace, what is it and how can I use it to my benefit” Wednesday 27th, 5-6.15 The highlights points out some important practices.  I’ll elaborate on a few of them here: Add instructions on how to compile the solution.  You do this by adding a text file with instructions to the solution, and keep it under source control.  These instructions should contain what is needed on top of a standard install of Visual Studio.  I do a lot of code reviews, and more often that not, I am not even able to compile the program, because they have used some tool or library that needs to be installed.  The same applies to any new developer who enters into the team, so do this to increase your productivity when the team changes, or a team member switches computer. Don’t forget to document what you have to configure on the computer, the IIS being a common one. The more automatic you can do this, the better.  Use NuGet to get down libraries. When the text document gets more than say, half a page, with a bunch of different things to do, convert it into a powershell script instead.  The metrics warning levels.  These are very conservatively set by Microsoft.  You rarely see anything but green, and besides, you should have color scales for each of the metrics.  I have a blog post describing a more appropriate set of levels, based on both research work and industry “best practices”.  The essential limits are: Cyclomatic complexity and coupling:  Higher numbers are worse On method levels: Green :  From 0 to 10 Yellow:  From 10 to 20  (some say 15).   Acceptable, but have a look to see if there is something unneeded here. Red: From 20 to 40:   Action required, get these down. Bleeding Red: Above 40   This is the real red alert.  Immediate action!  (My invention, as people have asked what do I do when I have cyclomatic complexity of 150.  The only answer I could think of was: RUN! ) Maintainability index:  Lower numbers are worse, scale from 0 to 100. On method levels: Green:  60 to 100 Yellow:  40 – 60.    You will always have methods here too, accept the higher ones, take a look at those who are down to the lower limit.  Check up against the other metrics.) Red:  20 – 40:  Action required, fix these. Bleeding red:  Below 20.  Immediate action required. When doing metrics analysis, you should leave the generated code out.  You do this by adding attributes, unfortunately Microsoft has “forgotten” to add these to all their stuff, so you might have to add them to some of the code.  It most cases it can be done so that it is not overwritten by a new round of code generation.  Take a look a my blog post here for details on how to do that. Class level metrics might also be useful, at least for coupling and maintenance.  But it is much more difficult to set any fixed limits on those.  Any metric aggregations on higher level tend to be pretty useless, as the number of methods vary pretty much, and there are little science on what number of methods can be regarded as good or bad.  NDepend have a recommendation, but they say it may vary too.  And in these days of data binding, the number might be pretty high, as properties counts as methods.  However, if you take the worst case situations, classes with more than 20 methods are suspicious, and coupling and cyclomatic complexity go red above 20, so any classes with more than 20x20 = 400 for these measures should be checked over. In the video we mention the SOLID principles, coined by “Uncle Bob” (Richard Martin). One of them, the Dependency Inversion principle we discuss in the video.  It is important to note that this principle is NOT on whether you should use a Dependency Inversion Container or not, it is about how you design the interfaces and interactions between your classes.  The Dependency Inversion Container is just one technique which is based on this principle, but which main purpose is to isolate things you would like to change at runtime, for example if you implement a plug in architecture.  Overuse of a Dependency Inversion Container is however, NOT a good thing.  It should be used for a purpose and not as a general DI solution.  The general DI solution and thinking however is useful far beyond the DIC.   You should always “program to an abstraction”, and not to the concreteness.  We also talk a bit about the GRASP patterns, a term coined by Craig Larman in his book Applying UML and design patterns. GRASP patterns stand for General Responsibility Assignment Software Patterns and describe fundamental principles of object design and responsibility assignment.  What I find great with these patterns is that they is another way to focus on the responsibility of a class.  One of the things I most often found that is broken in software designs, is that the class lack responsibility, and as a result there are a lot of classes mucking around in the internals of the other classes.  We also discuss the term “Code Smells”.  This term was invented by Kent Beck and Martin Fowler when they worked with Fowler’s “Refactoring” book. A code smell is a set of “bad” coding practices, which are the drivers behind a corresponding set of refactorings.  Here is a good list of the smells, and their corresponding refactor patterns. See also this.

    Read the article

  • European Interoperability Framework - a new beginning?

    - by trond-arne.undheim
    The most controversial document in the history of the European Commission's IT policy is out. EIF is here, wrapped in the Communication "Towards interoperability for European public services", and including the new feature European Interoperability Strategy (EIS), arguably a higher strategic take on the same topic. Leaving EIS aside for a moment, the EIF controversy has been around IPR, defining open standards and about the proper terminology around standardization deliverables. Today, as the document finally emerges, what is the verdict? First of all, to be fair to those among you who do not spend your lives in the intricate labyrinths of Commission IT policy documents on interoperability, let's define what we are talking about. According to the Communication: "An interoperability framework is an agreed approach to interoperability for organisations that want to collaborate to provide joint delivery of public services. Within its scope of applicability, it specifies common elements such as vocabulary, concepts, principles, policies, guidelines, recommendations, standards, specifications and practices." The Good - EIF reconfirms that "The Digital Agenda can only take off if interoperability based on standards and open platforms is ensured" and also confirms that "The positive effect of open specifications is also demonstrated by the Internet ecosystem." - EIF takes a productive and pragmatic stance on openness: "In the context of the EIF, openness is the willingness of persons, organisations or other members of a community of interest to share knowledge and stimulate debate within that community, the ultimate goal being to advance knowledge and the use of this knowledge to solve problems" (p.11). "If the openness principle is applied in full: - All stakeholders have the same possibility of contributing to the development of the specification and public review is part of the decision-making process; - The specification is available for everybody to study; - Intellectual property rights related to the specification are licensed on FRAND terms or on a royalty-free basis in a way that allows implementation in both proprietary and open source software" (p. 26). - EIF is a formal Commission document. The former EIF 1.0 was a semi-formal deliverable from the PEGSCO, a working group of Member State representatives. - EIF tackles interoperability head-on and takes a clear stance: "Recommendation 22. When establishing European public services, public administrations should prefer open specifications, taking due account of the coverage of functional needs, maturity and market support." - The Commission will continue to support the National Interoperability Framework Observatory (NIFO), reconfirming the importance of coordinating such approaches across borders. - The Commission will align its internal interoperability strategy with the EIS through the eCommission initiative. - One cannot stress the importance of using open standards enough, whether in the context of open source or non-open source software. The EIF seems to have picked up on this fact: What does the EIF says about the relation between open specifications and open source software? The EIF introduces, as one of the characteristics of an open specification, the requirement that IPRs related to the specification have to be licensed on FRAND terms or on a royalty-free basis in a way that allows implementation in both proprietary and open source software. In this way, companies working under various business models can compete on an equal footing when providing solutions to public administrations while administrations that implement the standard in their own software (software that they own) can share such software with others under an open source licence if they so decide. - EIF is now among the center pieces of the Digital Agenda (even though this demands extensive inter-agency coordination in the Commission): "The EIS and the EIF will be maintained under the ISA Programme and kept in line with the results of other relevant Digital Agenda actions on interoperability and standards such as the ones on the reform of rules on implementation of ICT standards in Europe to allow use of certain ICT fora and consortia standards, on issuing guidelines on essential intellectual property rights and licensing conditions in standard-setting, including for ex-ante disclosure, and on providing guidance on the link between ICT standardisation and public procurement to help public authorities to use standards to promote efficiency and reduce lock-in.(Communication, p.7)" All in all, quite a few good things have happened to the document in the two years it has been on the shelf or was being re-written, depending on your perspective, in any case, awaiting the storms to calm. The Bad - While a certain pragmatism is required, and governments cannot migrate to full openness overnight, EIF gives a bit too much room for governments not to apply the openness principle in full. Plenty of reasons are given, which should maybe have been put as challenges to be overcome: "However, public administrations may decide to use less open specifications, if open specifications do not exist or do not meet functional interoperability needs. In all cases, specifications should be mature and sufficiently supported by the market, except if used in the context of creating innovative solutions". - EIF does not use the internationally established terminology: open standards. Rather, the EIF introduces the notion of "formalised specification". How do "formalised specifications" relate to "standards"? According to the FAQ provided: The word "standard" has a specific meaning in Europe as defined by Directive 98/34/EC. Only technical specifications approved by a recognised standardisation body can be called a standard. Many ICT systems rely on the use of specifications developed by other organisations such as a forum or consortium. The EIF introduces the notion of "formalised specification", which is either a standard pursuant to Directive 98/34/EC or a specification established by ICT fora and consortia. The term "open specification" used in the EIF, on the one hand, avoids terminological confusion with the Directive and, on the other, states the main features that comply with the basic principle of openness laid down in the EIF for European Public Services. Well, this may be somewhat true, but in reality, Europe is 30 year behind in terminology. Unless the European Standardization Reform gets completed in the next few months, most Member States will likely conclude that they will go on referencing and using standards beyond those created by the three European endorsed monopolists of standardization, CEN, CENELEC and ETSI. Who can afford to begin following the strict Brussels rules for what they can call open standards when, in reality, standards stemming from global standardization organizations, so-called fora/consortia, dominate in the IT industry. What exactly is EIF saying? Does it encourage Member States to go on using non-ESO standards as long as they call it something else? I guess I am all for it, although it is a bit cumbersome, no? Why was there so much interest around the EIF? The FAQ attempts to explain: Some Member States have begun to adopt policies to achieve interoperability for their public services. These actions have had a significant impact on the ecosystem built around the provision of such services, e.g. providers of ICT goods and services, standardisation bodies, industry fora and consortia, etc... The Commission identified a clear need for action at European level to ensure that actions by individual Member States would not create new electronic barriers that would hinder the development of interoperable European public services. As a result, all stakeholders involved in the delivery of electronic public services in Europe have expressed their opinions on how to increase interoperability for public services provided by the different public administrations in Europe. Well, it does not take two years to read 50 consultation documents, and the EU Standardization Reform is not yet completed, so, more pragmatically, you finally had to release the document. Ok, let's leave some of that aside because the document is out and some people are happy (and others definitely not). The Verdict Considering the controversy, the delays, the lobbying, and the interests at stake both in the EU, in Member States and among vendors large and small, this document is pretty impressive. As with a good wine that has not yet come to full maturity, let's say that it seems to be coming in in the 85-88/100 range, but only a more fine-grained analysis, enjoyment in good company, and ultimately, implementation, will tell. The European Commission has today adopted a significant interoperability initiative to encourage public administrations across the EU to maximise the social and economic potential of information and communication technologies. Today, we should rally around this achievement. Tomorrow, let's sit down and figure out what it means for the future.

    Read the article

  • Of C# Iterators and Performance

    - by James Michael Hare
    Some of you reading this will be wondering, "what is an iterator" and think I'm locked in the world of C++.  Nope, I'm talking C# iterators.  No, not enumerators, iterators.   So, for those of you who do not know what iterators are in C#, I will explain it in summary, and for those of you who know what iterators are but are curious of the performance impacts, I will explore that as well.   Iterators have been around for a bit now, and there are still a bunch of people who don't know what they are or what they do.  I don't know how many times at work I've had a code review on my code and have someone ask me, "what's that yield word do?"   Basically, this post came to me as I was writing some extension methods to extend IEnumerable<T> -- I'll post some of the fun ones in a later post.  Since I was filtering the resulting list down, I was using the standard C# iterator concept; but that got me wondering: what are the performance implications of using an iterator versus returning a new enumeration?   So, to begin, let's look at a couple of methods.  This is a new (albeit contrived) method called Every(...).  The goal of this method is to access and enumeration and return every nth item in the enumeration (including the first).  So Every(2) would return items 0, 2, 4, 6, etc.   Now, if you wanted to write this in the traditional way, you may come up with something like this:       public static IEnumerable<T> Every<T>(this IEnumerable<T> list, int interval)     {         List<T> newList = new List<T>();         int count = 0;           foreach (var i in list)         {             if ((count++ % interval) == 0)             {                 newList.Add(i);             }         }           return newList;     }     So basically this method takes any IEnumerable<T> and returns a new IEnumerable<T> that contains every nth item.  Pretty straight forward.   The problem?  Well, Every<T>(...) will construct a list containing every nth item whether or not you care.  What happens if you were searching this result for a certain item and find that item after five tries?  You would have generated the rest of the list for nothing.   Enter iterators.  This C# construct uses the yield keyword to effectively defer evaluation of the next item until it is asked for.  This can be very handy if the evaluation itself is expensive or if there's a fair chance you'll never want to fully evaluate a list.   We see this all the time in Linq, where many expressions are chained together to do complex processing on a list.  This would be very expensive if each of these expressions evaluated their entire possible result set on call.    Let's look at the same example function, this time using an iterator:       public static IEnumerable<T> Every<T>(this IEnumerable<T> list, int interval)     {         int count = 0;         foreach (var i in list)         {             if ((count++ % interval) == 0)             {                 yield return i;             }         }     }   Notice it does not create a new return value explicitly, the only evidence of a return is the "yield return" statement.  What this means is that when an item is requested from the enumeration, it will enter this method and evaluate until it either hits a yield return (in which case that item is returned) or until it exits the method or hits a yield break (in which case the iteration ends.   Behind the scenes, this is all done with a class that the CLR creates behind the scenes that keeps track of the state of the iteration, so that every time the next item is asked for, it finds that item and then updates the current position so it knows where to start at next time.   It doesn't seem like a big deal, does it?  But keep in mind the key point here: it only returns items as they are requested. Thus if there's a good chance you will only process a portion of the return list and/or if the evaluation of each item is expensive, an iterator may be of benefit.   This is especially true if you intend your methods to be chainable similar to the way Linq methods can be chained.    For example, perhaps you have a List<int> and you want to take every tenth one until you find one greater than 10.  We could write that as:       List<int> someList = new List<int>();         // fill list here         someList.Every(10).TakeWhile(i => i <= 10);     Now is the difference more apparent?  If we use the first form of Every that makes a copy of the list.  It's going to copy the entire list whether we will need those items or not, that can be costly!    With the iterator version, however, it will only take items from the list until it finds one that is > 10, at which point no further items in the list are evaluated.   So, sounds neat eh?  But what's the cost is what you're probably wondering.  So I ran some tests using the two forms of Every above on lists varying from 5 to 500,000 integers and tried various things.    Now, iteration isn't free.  If you are more likely than not to iterate the entire collection every time, iterator has some very slight overhead:   Copy vs Iterator on 100% of Collection (10,000 iterations) Collection Size Num Iterated Type Total ms 5 5 Copy 5 5 5 Iterator 5 50 50 Copy 28 50 50 Iterator 27 500 500 Copy 227 500 500 Iterator 247 5000 5000 Copy 2266 5000 5000 Iterator 2444 50,000 50,000 Copy 24,443 50,000 50,000 Iterator 24,719 500,000 500,000 Copy 250,024 500,000 500,000 Iterator 251,521   Notice that when iterating over the entire produced list, the times for the iterator are a little better for smaller lists, then getting just a slight bit worse for larger lists.  In reality, given the number of items and iterations, the result is near negligible, but just to show that iterators come at a price.  However, it should also be noted that the form of Every that returns a copy will have a left-over collection to garbage collect.   However, if we only partially evaluate less and less through the list, the savings start to show and make it well worth the overhead.  Let's look at what happens if you stop looking after 80% of the list:   Copy vs Iterator on 80% of Collection (10,000 iterations) Collection Size Num Iterated Type Total ms 5 4 Copy 5 5 4 Iterator 5 50 40 Copy 27 50 40 Iterator 23 500 400 Copy 215 500 400 Iterator 200 5000 4000 Copy 2099 5000 4000 Iterator 1962 50,000 40,000 Copy 22,385 50,000 40,000 Iterator 19,599 500,000 400,000 Copy 236,427 500,000 400,000 Iterator 196,010       Notice that the iterator form is now operating quite a bit faster.  But the savings really add up if you stop on average at 50% (which most searches would typically do):     Copy vs Iterator on 50% of Collection (10,000 iterations) Collection Size Num Iterated Type Total ms 5 2 Copy 5 5 2 Iterator 4 50 25 Copy 25 50 25 Iterator 16 500 250 Copy 188 500 250 Iterator 126 5000 2500 Copy 1854 5000 2500 Iterator 1226 50,000 25,000 Copy 19,839 50,000 25,000 Iterator 12,233 500,000 250,000 Copy 208,667 500,000 250,000 Iterator 122,336   Now we see that if we only expect to go on average 50% into the results, we tend to shave off around 40% of the time.  And this is only for one level deep.  If we are using this in a chain of query expressions it only adds to the savings.   So my recommendation?  If you have a resonable expectation that someone may only want to partially consume your enumerable result, I would always tend to favor an iterator.  The cost if they iterate the whole thing does not add much at all -- and if they consume only partially, you reap some really good performance gains.   Next time I'll discuss some of my favorite extensions I've created to make development life a little easier and maintainability a little better.

    Read the article

  • How to check if a Webcam is broken?

    - by user84812
    I just bought an Acer Aspire 3830TG, it comes with an integrated 1.3M HD Webcam. Before buying it i tried with a bootable Lubuntu usb stick, everything worked well except for the webcam, which i thought I had to tweak. The thing is that it seems the camera should work with no problems in ubuntu. The driver is detected, I try dmesg | grep uvcvideo and the output is [ 12.226174] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (058f:b002) [ 12.245553] usbcore: registered new interface driver uvcvideo I've also tried using different software (guvcview is black when camera output is MJPG and turns to funny colors when YU12 or YV12, cheese is always black, camorama is always with funny colors...). I should have checked that it was working properly with the default os (windows) but now it's too late for that. I even booted with a official Ubuntu Quantal distro from the usb pen, and the results are the same. so, my question is: is there any way to check that the camera is righmt or broken? So, if it's broken, at least i can go to the shop, show them that it's really broken and get an external webcam for free, or st like that. cheers. UPDATE 1 Thanks, jrp. I run sudo lsinput, and the output info about my video is the following: /dev/input/event6 bustype : BUS_USB vendor : 0x58f product : 0xb002 version : 2 name : "1.3M HD WebCam" phys : "usb-0000:00:1a.0-1.3/button" bits ev : EV_SYN EV_KEY /dev/input/event7 bustype : BUS_HOST vendor : 0x0 product : 0x6 version : 0 name : "Video Bus" phys : "LNXVIDEO/video/input0" bits ev : EV_SYN EV_KEY With this info, i'm not pretty sure about running the luvcview command. If I run luvcview -d /dev/video0 -L, the output is the following: SDL information: Video driver: x11 A window manager is available Device information: Device path: /dev/video0 { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/7, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/7, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/7, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/7, 1/5, { pixelformat = 'MJPG', description = 'MJPEG' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, { pixelformat = 'RGB3', description = 'RGB3' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, { pixelformat = 'BGR3', description = 'BGR3' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, { pixelformat = 'YU12', description = 'YU12' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, { pixelformat = 'YV12', description = 'YV12' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 720 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 1280, height = 800 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 960 } Time interval between frame: 1/15, 1/10, 1/5, { discrete: width = 1280, height = 1024 } Time interval between frame: 1/15, 1/10, 1/5, if i run luvcview by itself, the image is funny (blue and red colors, mainly, with myself in negative state). tx

    Read the article

  • Windows Azure Virtual Machine Readiness and Capacity Assessment for SQL Server

    - by SQLOS Team
    Windows Azure Virtual Machine Readiness and Capacity Assessment for Windows Server Machine Running SQL Server With the release of MAP Toolkit 8.0 Beta, we have added a new scenario to assess your Windows Azure Virtual Machine Readiness. The MAP 8.0 Beta performs a comprehensive assessment of Windows Servers running SQL Server to determine you level of readiness to migrate an on-premise physical or virtual machine to Windows Azure Virtual Machines. The MAP Toolkit then offers suggested changes to prepare the machines for migration, such as upgrading the operating system or SQL Server. MAP Toolkit 8.0 Beta is available for download here Your participation and feedback is very important to make the MAP Toolkit work better for you. We encourage you to participate in the beta program and provide your feedback at [email protected] or through one of our surveys. Now, let’s walk through the MAP Toolkit task for completing the Windows Azure Virtual Machine assessment and capacity planning. The tasks include the following: Perform an inventory View the Windows Azure VM Readiness results and report Collect performance data for determine VM sizing View the Windows Azure Capacity results and report Perform an inventory: 1. To perform an inventory against a single machine or across a complete environment, choose Perform an Inventory to launch the Inventory and Assessment Wizard as shown below: 2. After the Inventory and Assessment Wizard launches, select either the Windows computers or SQL Server scenario to inventory Windows machines. HINT: If you don’t care about completely inventorying a machine, just select the SQL Server scenario. Click Next to Continue. 3. On the Discovery Methods page, select how you want to discover computers and then click Next to continue. Description of Discovery Methods: Use Active Directory Domain Services -- This method allows you to query a domain controller via the Lightweight Directory Access Protocol (LDAP) and select computers in all or specific domains, containers, or OUs. Use this method if all computers and devices are in AD DS. Windows networking protocols --  This method uses the WIN32 LAN Manager application programming interfaces to query the Computer Browser service for computers in workgroups and Windows NT 4.0–based domains. If the computers on the network are not joined to an Active Directory domain, use only the Windows networking protocols option to find computers. System Center Configuration Manager (SCCM) -- This method enables you to inventory computers managed by System Center Configuration Manager (SCCM). You need to provide credentials to the System Center Configuration Manager server in order to inventory the managed computers. When you select this option, the MAP Toolkit will query SCCM for a list of computers and then MAP will connect to these computers. Scan an IP address range -- This method allows you to specify the starting address and ending address of an IP address range. The wizard will then scan all IP addresses in the range and inventory only those computers. Note: This option can perform poorly, if many IP addresses aren’t being used within the range. Manually enter computer names and credentials -- Use this method if you want to inventory a small number of specific computers. Import computer names from a files -- Using this method, you can create a text file with a list of computer names that will be inventoried. 4. On the All Computers Credentials page, enter the accounts that have administrator rights to connect to the discovered machines. This does not need to a domain account, but needs to be a local administrator. I have entered my domain account that is an administrator on my local machine. Click Next after one or more accounts have been added. NOTE: The MAP Toolkit primarily uses Windows Management Instrumentation (WMI) to collect hardware, device, and software information from the remote computers. In order for the MAP Toolkit to successfully connect and inventory computers in your environment, you have to configure your machines to inventory through WMI and also allow your firewall to enable remote access through WMI. The MAP Toolkit also requires remote registry access for certain assessments. In addition to enabling WMI, you need accounts with administrative privileges to access desktops and servers in your environment. 5. On the Credentials Order page, select the order in which want the MAP Toolkit to connect to the machine and SQL Server. Generally just accept the defaults and click Next. 6. On the Enter Computers Manually page, click Create to pull up at dialog to enter one or more computer names. 7. On the Summary page confirm your settings and then click Finish. After clicking Finish the inventory process will start, as shown below: Windows Azure Readiness results and report After the inventory progress has completed, you can review the results under the Database scenario. On the tile, you will see the number of Windows Server machine with SQL Server that were analyzed, the number of machines that are ready to move without changes and the number of machines that require further changes. If you click this Azure VM Readiness tile, you will see additional details and can generate the Windows Azure VM Readiness Report. After the report is generated, select View | Saved Reports and Proposals to view the location of the report. Open up WindowsAzureVMReadiness* report in Excel. On the Windows tab, you can see the results of the assessment. This report has a column for the Operating System and SQL Server assessment and provides a recommendation on how to resolve, if there a component is not supported. Collect Performance Data Launch the Performance Wizard to collect performance information for the Windows Server machines that you would like the MAP Toolkit to suggest a Windows Azure VM size for. Windows Azure Capacity results and report After the performance metrics are collected, the Azure VM Capacity title will display the number of Virtual Machine sizes that are suggested for the Windows Server and Linux machines that were analyzed. You can then click on the Azure VM Capacity tile to see the capacity details and generate the Windows Azure VM Capacity Report. Within this report, you can view the performance data that was collected and the Virtual Machine sizes.   MAP Toolkit 8.0 Beta is available for download here Your participation and feedback is very important to make the MAP Toolkit work better for you. We encourage you to participate in the beta program and provide your feedback at [email protected] or through one of our surveys. Useful References: Windows Azure Homepage How to guides for Windows Azure Virtual Machines Provisioning a SQL Server Virtual Machine on Windows Azure Windows Azure Pricing     Peter Saddow Senior Program Manager – MAP Toolkit Team

    Read the article

  • WebSocket Applications using Java: JSR 356 Early Draft Now Available (TOTD #183)

    - by arungupta
    WebSocket provide a full-duplex and bi-directional communication protocol over a single TCP connection. JSR 356 is defining a standard API for creating WebSocket applications in the Java EE 7 Platform. This Tip Of The Day (TOTD) will provide an introduction to WebSocket and how the JSR is evolving to support the programming model. First, a little primer on WebSocket! WebSocket is a combination of IETF RFC 6455 Protocol and W3C JavaScript API (still a Candidate Recommendation). The protocol defines an opening handshake and data transfer. The API enables Web pages to use the WebSocket protocol for two-way communication with the remote host. Unlike HTTP, there is no need to create a new TCP connection and send a chock-full of headers for every message exchange between client and server. The WebSocket protocol defines basic message framing, layered over TCP. Once the initial handshake happens using HTTP Upgrade, the client and server can send messages to each other, independent from the other. There are no pre-defined message exchange patterns of request/response or one-way between client and and server. These need to be explicitly defined over the basic protocol. The communication between client and server is pretty symmetric but there are two differences: A client initiates a connection to a server that is listening for a WebSocket request. A client connects to one server using a URI. A server may listen to requests from multiple clients on the same URI. Other than these two difference, the client and server behave symmetrically after the opening handshake. In that sense, they are considered as "peers". After a successful handshake, clients and servers transfer data back and forth in conceptual units referred as "messages". On the wire, a message is composed of one or more frames. Application frames carry payload intended for the application and can be text or binary data. Control frames carry data intended for protocol-level signaling. Now lets talk about the JSR! The Java API for WebSocket is worked upon as JSR 356 in the Java Community Process. This will define a standard API for building WebSocket applications. This JSR will provide support for: Creating WebSocket Java components to handle bi-directional WebSocket conversations Initiating and intercepting WebSocket events Creation and consumption of WebSocket text and binary messages The ability to define WebSocket protocols and content models for an application Configuration and management of WebSocket sessions, like timeouts, retries, cookies, connection pooling Specification of how WebSocket application will work within the Java EE security model Tyrus is the Reference Implementation for JSR 356 and is already integrated in GlassFish 4.0 Promoted Builds. And finally some code! The API allows to create WebSocket endpoints using annotations and interface. This TOTD will show a simple sample using annotations. A subsequent blog will show more advanced samples. A POJO can be converted to a WebSocket endpoint by specifying @WebSocketEndpoint and @WebSocketMessage. @WebSocketEndpoint(path="/hello")public class HelloBean {     @WebSocketMessage    public String sayHello(String name) {         return "Hello " + name + "!";     }} @WebSocketEndpoint marks this class as a WebSocket endpoint listening at URI defined by the path attribute. The @WebSocketMessage identifies the method that will receive the incoming WebSocket message. This first method parameter is injected with payload of the incoming message. In this case it is assumed that the payload is text-based. It can also be of the type byte[] in case the payload is binary. A custom object may be specified if decoders attribute is specified in the @WebSocketEndpoint. This attribute will provide a list of classes that define how a custom object can be decoded. This method can also take an optional Session parameter. This is injected by the runtime and capture a conversation between two endpoints. The return type of the method can be String, byte[] or a custom object. The encoders attribute on @WebSocketEndpoint need to define how a custom object can be encoded. The client side is an index.jsp with embedded JavaScript. The JSP body looks like: <div style="text-align: center;"> <form action="">     <input onclick="say_hello()" value="Say Hello" type="button">         <input id="nameField" name="name" value="WebSocket" type="text"><br>    </form> </div> <div id="output"></div> The code is relatively straight forward. It has an HTML form with a button that invokes say_hello() method and a text field named nameField. A div placeholder is available for displaying the output. Now, lets take a look at some JavaScript code: <script language="javascript" type="text/javascript"> var wsUri = "ws://localhost:8080/HelloWebSocket/hello";     var websocket = new WebSocket(wsUri);     websocket.onopen = function(evt) { onOpen(evt) };     websocket.onmessage = function(evt) { onMessage(evt) };     websocket.onerror = function(evt) { onError(evt) };     function init() {         output = document.getElementById("output");     }     function say_hello() {      websocket.send(nameField.value);         writeToScreen("SENT: " + nameField.value);     } This application is deployed as "HelloWebSocket.war" (download here) on GlassFish 4.0 promoted build 57. So the WebSocket endpoint is listening at "ws://localhost:8080/HelloWebSocket/hello". A new WebSocket connection is initiated by specifying the URI to connect to. The JavaScript API defines callback methods that are invoked when the connection is opened (onOpen), closed (onClose), error received (onError), or a message from the endpoint is received (onMessage). The client API has several send methods that transmit data over the connection. This particular script sends text data in the say_hello method using nameField's value from the HTML shown earlier. Each click on the button sends the textbox content to the endpoint over a WebSocket connection and receives a response based upon implementation in the sayHello method shown above. How to test this out ? Download the entire source project here or just the WAR file. Download GlassFish4.0 build 57 or later and unzip. Start GlassFish as "asadmin start-domain". Deploy the WAR file as "asadmin deploy HelloWebSocket.war". Access the application at http://localhost:8080/HelloWebSocket/index.jsp. After clicking on "Say Hello" button, the output would look like: Here are some references for you: WebSocket - Protocol and JavaScript API JSR 356: Java API for WebSocket - Specification (Early Draft) and Implementation (already integrated in GlassFish 4 promoted builds) Subsequent blogs will discuss the following topics (not necessary in that order) ... Binary data as payload Custom payloads using encoder/decoder Error handling Interface-driven WebSocket endpoint Java client API Client and Server configuration Security Subprotocols Extensions Other topics from the API Capturing WebSocket on-the-wire messages

    Read the article

  • Dell Studio 1737 Overheating

    - by Sean
    I am using a Dell Studio 1737 laptop. I have been running Linux and have ran Windows recently for a very long time. I upgraded to the 10.10 distribution and since that distro, it seems that for some reason all Linuxes want to push my laptop to extremes. I have recently upgraded to Ubuntu 12.04 since I heart that it contains kernel fixes for overheating issues. 12.04 will actually eventually cool the system, but that is after the fans run to the point it sounds like a jet aircraft taking off and the laptop makes my hands sweat. In trying to combat the heat problems I have done the following: I installed the propriatery driver for my ATI Mobility HD 3600. I have tried both the one in the Additional Drivers and also tried ATI's latest greatest version. If I don't install this my laptop will overheat and shut off in minutes. Both seem to perform similarly, but the heat problem remains. I have tried limiting the CPU by installing the CPUFreq Indicator. This does help keep the machine from shutting off, but the heat is still uncomfortable to be around the machine. I usually run in power saver mode or run the cpu at 1.6 GHZ just to error on safety. I ran sensors-detect and here are the results: sean@sean-Studio-1737:~$ sudo sensors-detect # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: Dell Inc. Studio 1737 (laptop) # Board: Dell Inc. 0F237N This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Module cpuid loaded successfully. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... Yes Found `ITE IT8512E/F/G Super IO' (but not activated) Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel ICH9 Module i2c-i801 loaded successfully. Module i2c-dev loaded successfully. Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO)y Successful! Monitoring programs won't work until the needed modules are loaded. You may want to run 'service module-init-tools start' to load them. Unloading i2c-dev... OK Unloading i2c-i801... OK Unloading cpuid... OK sean@sean-Studio-1737:~$ sudo service module-init-tools start module-init-tools stop/waiting I also tried installing i8k but that didn't work since it didn't seem to be able to communicate with the hardware (probably for different kind of device). Also I ran acpi -V and here are the results: Battery 0: Full, 100% Battery 0: design capacity 613 mAh, last full capacity 260 mAh = 42% Adapter 0: on-line Thermal 0: ok, 49.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 1: ok, 48.0 degrees C Thermal 1: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 2: ok, 51.0 degrees C Thermal 2: trip point 0 switches to mode critical at temperature 100.0 degrees C Cooling 0: LCD 0 of 15 Cooling 1: Processor 0 of 10 Cooling 2: Processor 0 of 10 I have hit a wall and don't know what to do now. Any advice is appreciated.

    Read the article

  • RIF PRD: Presentation syntax issues

    - by Charles Young
    Over Christmas I got to play a bit with the W3C RIF PRD and came across a few issues which I thought I would record for posterity. Specifically, I was working on a grammar for the presentation syntax using a GLR grammar parser tool (I was using the current CTP of ‘M’ (MGrammer) and Intellipad – I do so hope the MS guys don’t kill off M and Intellipad now they have dropped the other parts of SQL Server Modelling). I realise that the presentation syntax is non-normative and that any issues with it do not therefore compromise the standard. However, presentation syntax is useful in its own right, and it would be great to iron out any issues in a future revision of the standard. The main issues are actually not to do with the grammar at all, but rather with the ‘running example’ in the RIF PRD recommendation. I started with the code provided in Example 9.1. There are several discrepancies when compared with the EBNF rules documented in the standard. Broadly the problems can be categorised as follows: ·      Parenthesis mismatch – the wrong number of parentheses are used in various places. For example, in GoldRule, the RHS of the rule (the ‘Then’) is nested in the LHS (‘the If’). In NewCustomerAndWidgetRule, the RHS is orphaned from the LHS. Together with additional incorrect parenthesis, this leads to orphanage of UnknownStatusRule from the entire Document. ·      Invalid use of parenthesis in ‘Forall’ constructs. Parenthesis should not be used to enclose formulae. Removal of the invalid parenthesis gave me a feeling of inconsistency when comparing formulae in Forall to formulae in If. The use of parenthesis is not actually inconsistent in these two context, but in an If construct it ‘feels’ as if you are enclosing formulae in parenthesis in a LISP-like fashion. In reality, the parenthesis is simply being used to group subordinate syntax elements. The fact that an If construct can contain only a single formula as an immediate child adds to this feeling of inconsistency. ·      Invalid representation of compact URIs (CURIEs) in the context of Frame productions. In several places the URIs are not qualified with a namespace prefix (‘ex1:’). This conflicts with the definition of CURIEs in the RIF Datatypes and Built-Ins 1.0 document. Here are the productions: CURIE          ::= PNAME_LN                  | PNAME_NS PNAME_LN       ::= PNAME_NS PN_LOCAL PNAME_NS       ::= PN_PREFIX? ':' PN_LOCAL       ::= ( PN_CHARS_U | [0-9] ) ((PN_CHARS|'.')* PN_CHARS)? PN_CHARS       ::= PN_CHARS_U                  | '-' | [0-9] | #x00B7                  | [#x0300-#x036F] | [#x203F-#x2040] PN_CHARS_U     ::= PN_CHARS_BASE                  | '_' PN_CHARS_BASE ::= [A-Z] | [a-z] | [#x00C0-#x00D6] | [#x00D8-#x00F6]                  | [#x00F8-#x02FF] | [#x0370-#x037D] | [#x037F-#x1FFF]                  | [#x200C-#x200D] | [#x2070-#x218F] | [#x2C00-#x2FEF]                  | [#x3001-#xD7FF] | [#xF900-#xFDCF] | [#xFDF0-#xFFFD]                  | [#x10000-#xEFFFF] PN_PREFIX      ::= PN_CHARS_BASE ((PN_CHARS|'.')* PN_CHARS)? The more I look at CURIEs, the more my head hurts! The RIF specification allows prefixes and colons without local names, which surprised me. However, the CURIE Syntax 1.0 working group note specifically states that this form is supported…and then promptly provides a syntactic definition that seems to preclude it! However, on (much) deeper inspection, it appears that ‘ex1:’ (for example) is allowed, but would really represent a ‘fragment’ of the ‘reference’, rather than a prefix! Ouch! This is so completely ambiguous that it surely calls into question the whole CURIE specification.   In any case, RIF does not allow local names without a prefix. ·      Missing ‘External’ specifiers for built-in functions and predicates.  The EBNF specification enforces this for terms within frames, but does not appear to enforce (what I believe is) the correct use of External on built-in predicates. In any case, the running example only specifies ‘External’ once on the predicate in UnknownStatusRule. External() is required in several other places. ·      The List used on the LHS of UnknownStatusRule is comma-delimited. This is not supported by the EBNF definition. Similarly, the argument list of pred:list-contains is illegally comma-delimited. ·      Unnecessary use of conjunction around a single formula in DiscountRule. This is strictly legal in the EBNF, but redundant.   All the above issues concern the presentation syntax used in the running example. There are a few minor issues with the grammar itself. Note that Michael Kiefer stated in his paper “Rule Interchange Format: The Framework” that: “The presentation syntax of RIF … is an abstract syntax and, as such, it omits certain details that might be important for unambiguous parsing.” ·      The grammar cannot differentiate unambiguously between strategies and priorities on groups. A processor is forced to resolve this by detecting the use of IRIs and integers. This could easily be fixed in the grammar.   ·      The grammar cannot unambiguously parse the ‘->’ operator in frames. Specifically, ‘-’ characters are allowed in PN_LOCAL names and hence a parser cannot determine if ‘status->’ is (‘status’ ‘->’) or (‘status-’ ‘>’).   One way to fix this is to amend the PN_LOCAL production as follows: PN_LOCAL ::= ( PN_CHARS_U | [0-9] ) ((PN_CHARS|'.')* ((PN_CHARS)-('-')))? However, unilaterally changing the definition of this production, which is defined in the SPARQL Query Language for RDF specification, makes me uncomfortable. ·      I assume that the presentation syntax is case-sensitive. I couldn’t find this stated anywhere in the documentation, but function/predicate names do appear to be documented as being case-sensitive. ·      The EBNF does not specify whitespace handling. A couple of productions (RULE and ACTION_BLOCK) are crafted to enforce the use of whitespace. This is not necessary. It seems inconsistent with the rest of the specification and can cause parsing issues. In addition, the Const production exhibits whitespaces issues. The intention may have been to disallow the use of whitespace around ‘^^’, but any direct implementation of the EBNF will probably allow whitespace between ‘^^’ and the SYMSPACE. Of course, I am being a little nit-picking about all this. On the whole, the EBNF translated very smoothly and directly to ‘M’ (MGrammar) and proved to be fairly complete. I have encountered far worse issues when translating other EBNF specifications into usable grammars.   I can’t imagine there would be any difficulty in implementing the same grammar in Antlr, COCO/R, gppg, XText, Bison, etc. A general observation, which repeats a point made above, is that the use of parenthesis in the presentation syntax can feel inconsistent and un-intuitive.   It isn’t actually inconsistent, but I think the presentation syntax could be improved by adopting braces, rather than parenthesis, to delimit subordinate syntax elements in a similar way to so many programming languages. The familiarity of braces would communicate the structure of the syntax more clearly to people like me.  If braces were adopted, parentheses could be retained around ‘var (frame | ‘new()’) constructs in action blocks. This use of parenthesis feels very LISP-like, and I think that this is my issue. It’s as if the presentation syntax represents the deformed love-child of LISP and C. In some places (specifically, action blocks), parenthesis is used in a LISP-like fashion. In other places it is used like braces in C. I find this quite confusing. Here is a corrected version of the running example (Example 9.1) in compliant presentation syntax: Document(    Prefix( ex1 <http://example.com/2009/prd2> )    (* ex1:CheckoutRuleset *)  Group rif:forwardChaining (     (* ex1:GoldRule *)    Group 10 (      Forall ?customer such that And(?customer # ex1:Customer                                     ?customer[ex1:status->"Silver"])        (Forall ?shoppingCart such that ?customer[ex1:shoppingCart->?shoppingCart]           (If Exists ?value (And(?shoppingCart[ex1:value->?value]                                  External(pred:numeric-greater-than-or-equal(?value 2000))))            Then Do(Modify(?customer[ex1:status->"Gold"])))))      (* ex1:DiscountRule *)    Group (      Forall ?customer such that ?customer # ex1:Customer        (If Or( ?customer[ex1:status->"Silver"]                ?customer[ex1:status->"Gold"])         Then Do ((?s ?customer[ex1:shoppingCart-> ?s])                  (?v ?s[ex1:value->?v])                  Modify(?s [ex1:value->External(func:numeric-multiply (?v 0.95))]))))      (* ex1:NewCustomerAndWidgetRule *)    Group (      Forall ?customer such that And(?customer # ex1:Customer                                     ?customer[ex1:status->"New"] )        (If Exists ?shoppingCart ?item                   (And(?customer[ex1:shoppingCart->?shoppingCart]                        ?shoppingCart[ex1:containsItem->?item]                        ?item # ex1:Widget ) )         Then Do( (?s ?customer[ex1:shoppingCart->?s])                  (?val ?s[ex1:value->?val])                  (?voucher ?customer[ex1:voucher->?voucher])                  Retract(?customer[ex1:voucher->?voucher])                  Retract(?voucher)                  Modify(?s[ex1:value->External(func:numeric-multiply(?val 0.90))]))))      (* ex1:UnknownStatusRule *)    Group (      Forall ?customer such that ?customer # ex1:Customer        (If Not(Exists ?status                       (And(?customer[ex1:status->?status]                            External(pred:list-contains(List("New" "Bronze" "Silver" "Gold") ?status)) )))         Then Do( Execute(act:print(External(func:concat("New customer: " ?customer))))                  Assert(?customer[ex1:status->"New"]))))  ) )   I hope that helps someone out there :-)

    Read the article

  • Windows Azure Virtual Machine Readiness and Capacity Assessment for SQL Server

    - by SQLOS Team
    Windows Azure Virtual Machine Readiness and Capacity Assessment for Windows Server Machine Running SQL Server With the release of MAP Toolkit 8.0 Beta, we have added a new scenario to assess your Windows Azure Virtual Machine Readiness. The MAP 8.0 Beta performs a comprehensive assessment of Windows Servers running SQL Server to determine you level of readiness to migrate an on-premise physical or virtual machine to Windows Azure Virtual Machines. The MAP Toolkit then offers suggested changes to prepare the machines for migration, such as upgrading the operating system or SQL Server. MAP Toolkit 8.0 Beta is available for download here Your participation and feedback is very important to make the MAP Toolkit work better for you. We encourage you to participate in the beta program and provide your feedback at [email protected] or through one of our surveys. Now, let’s walk through the MAP Toolkit task for completing the Windows Azure Virtual Machine assessment and capacity planning. The tasks include the following: Perform an inventory View the Windows Azure VM Readiness results and report Collect performance data for determine VM sizing View the Windows Azure Capacity results and report Perform an inventory: 1. To perform an inventory against a single machine or across a complete environment, choose Perform an Inventory to launch the Inventory and Assessment Wizard as shown below: 2. After the Inventory and Assessment Wizard launches, select either the Windows computers or SQL Server scenario to inventory Windows machines. HINT: If you don’t care about completely inventorying a machine, just select the SQL Server scenario. Click Next to Continue. 3. On the Discovery Methods page, select how you want to discover computers and then click Next to continue. Description of Discovery Methods: Use Active Directory Domain Services -- This method allows you to query a domain controller via the Lightweight Directory Access Protocol (LDAP) and select computers in all or specific domains, containers, or OUs. Use this method if all computers and devices are in AD DS. Windows networking protocols --  This method uses the WIN32 LAN Manager application programming interfaces to query the Computer Browser service for computers in workgroups and Windows NT 4.0–based domains. If the computers on the network are not joined to an Active Directory domain, use only the Windows networking protocols option to find computers. System Center Configuration Manager (SCCM) -- This method enables you to inventory computers managed by System Center Configuration Manager (SCCM). You need to provide credentials to the System Center Configuration Manager server in order to inventory the managed computers. When you select this option, the MAP Toolkit will query SCCM for a list of computers and then MAP will connect to these computers. Scan an IP address range -- This method allows you to specify the starting address and ending address of an IP address range. The wizard will then scan all IP addresses in the range and inventory only those computers. Note: This option can perform poorly, if many IP addresses aren’t being used within the range. Manually enter computer names and credentials -- Use this method if you want to inventory a small number of specific computers. Import computer names from a files -- Using this method, you can create a text file with a list of computer names that will be inventoried. 4. On the All Computers Credentials page, enter the accounts that have administrator rights to connect to the discovered machines. This does not need to a domain account, but needs to be a local administrator. I have entered my domain account that is an administrator on my local machine. Click Next after one or more accounts have been added. NOTE: The MAP Toolkit primarily uses Windows Management Instrumentation (WMI) to collect hardware, device, and software information from the remote computers. In order for the MAP Toolkit to successfully connect and inventory computers in your environment, you have to configure your machines to inventory through WMI and also allow your firewall to enable remote access through WMI. The MAP Toolkit also requires remote registry access for certain assessments. In addition to enabling WMI, you need accounts with administrative privileges to access desktops and servers in your environment. 5. On the Credentials Order page, select the order in which want the MAP Toolkit to connect to the machine and SQL Server. Generally just accept the defaults and click Next. 6. On the Enter Computers Manually page, click Create to pull up at dialog to enter one or more computer names. 7. On the Summary page confirm your settings and then click Finish. After clicking Finish the inventory process will start, as shown below: Windows Azure Readiness results and report After the inventory progress has completed, you can review the results under the Database scenario. On the tile, you will see the number of Windows Server machine with SQL Server that were analyzed, the number of machines that are ready to move without changes and the number of machines that require further changes. If you click this Azure VM Readiness tile, you will see additional details and can generate the Windows Azure VM Readiness Report. After the report is generated, select View | Saved Reports and Proposals to view the location of the report. Open up WindowsAzureVMReadiness* report in Excel. On the Windows tab, you can see the results of the assessment. This report has a column for the Operating System and SQL Server assessment and provides a recommendation on how to resolve, if there a component is not supported. Collect Performance Data Launch the Performance Wizard to collect performance information for the Windows Server machines that you would like the MAP Toolkit to suggest a Windows Azure VM size for. Windows Azure Capacity results and report After the performance metrics are collected, the Azure VM Capacity title will display the number of Virtual Machine sizes that are suggested for the Windows Server and Linux machines that were analyzed. You can then click on the Azure VM Capacity tile to see the capacity details and generate the Windows Azure VM Capacity Report. Within this report, you can view the performance data that was collected and the Virtual Machine sizes.   MAP Toolkit 8.0 Beta is available for download here Your participation and feedback is very important to make the MAP Toolkit work better for you. We encourage you to participate in the beta program and provide your feedback at [email protected] or through one of our surveys. Useful References: Windows Azure Homepage How to guides for Windows Azure Virtual Machines Provisioning a SQL Server Virtual Machine on Windows Azure Windows Azure Pricing     Peter Saddow Senior Program Manager – MAP Toolkit Team

    Read the article

  • First PC Build (Part 1)

    - by Anthony Trudeau
    Originally posted on: http://geekswithblogs.net/tonyt/archive/2014/08/05/157959.aspxA couple of months ago I made the decision to build myself a new computer. The intended use is gaming and for using the last real version of Photoshop. I was motivated by the poor state of console gaming and a simple desire to do something I haven’t done before – build a PC from the ground up. I’ve been using PCs for more than two decades. I’ve replaced a component hear and there, but for the last 10 years or so I’ve only used laptops. Therefore, this article will be written from the perspective of someone familiar with PCs, but completely new at building. I’m not an expert and this is not a definitive guide for building a PC, but I do hope that it encourages you to try it yourself. Component List Research There was a lot of research necessary, because building a PC is completely new to me, and I haven’t kept up with what’s out there. The first thing you want to do is nail down what your goals are. Your goals are going to be driven by what you want to do with your computer and personal choice. Don’t neglect the second one, because if you’re doing this for fun you want to get what you want. In my case, I focused on three things: performance, longevity, and aesthetics. The performance aspect is important for gaming and Photoshop. This will drive what components you get. For example, heavy gaming use is going to drive your choice of graphics card. Longevity is relevant to me, because I don’t want to be changing things out anytime soon for the next hot game. The consequence of performance and longevity is cost. Finally, aesthetics was my next consideration. I could have just built a box, but it wouldn’t have been nearly as fun for me. Aesthetics might not be important to you. They are for me. I also like gadgets and that played into at least one purchase for this build. I used PC Part Picker to put together my component list. I found it invaluable during the process and I’d recommend it to everyone. One caveat is that I wouldn’t trust the compatibility aspects. It does a pretty good job of not steering you wrong, but do your own research. The rest of it isn’t really sexy. I started out with what appealed to me and then I made changes and additions as I dived deep into researching each component and interaction I could find. The resources I used are innumerable. I used reviews, product descriptions, forum posts (praises and problems), et al. to assist me. I also asked friends into gaming what they thought about my component list. And when I got near the end I posted my list to the Reddit /r/buildapc forum. I cannot stress the value of extra sets of eyeballs and first hand experiences. Some of the resources I used: PC Part Picker Tom’s Hardware bit-tech Reddit Purchase PC Part Picker favors certain vendors. You should look at others too. In my case I found their favorites to be the best. My priorities were out-the-door price and shipping time. I knew that once I started getting parts I’d want to start building. Luckily, I timed it well and everything arrived within the span of a few days. Here are my opinions on the vendors I ended up using in alphabetical order. Amazon.com is a good, reliable choice. They have excellent customer service in my experience, and I knew I wouldn’t have trouble with them. However, shipping time is often a problem when you use their free shipping unless you order expensive items (I’ve found items over $100 ship quickly). Ultimately though, price wasn’t always the best and their collection of sales tax in my state turned me off them. I did purchase my case from them. I ordered the mouse as well, but I cancelled after it was stuck four days in a “shipping soon” state. I purchased the mouse locally. Best Buy is not my favorite place to do business. There’s a lot of history with poor, uninterested sales representatives and they used to have a lot of bad anti-consumer policies. That’s a lot better now, but the bad taste is still in my mouth. I ended up purchasing the accessories from them including mouse (locally) and headphones. NCIX is a company that I’ve never heard of before. It popped up as a recommendation for my CPU cooler on PC Part Picker. I didn’t do a lot of research on the company, because their policy on you buying insurance for your orders turned me off. That policy makes it clear to me that the company finds me responsible for the shipment once it leaves their dock. That’s not right, and may run afoul of state laws. Regardless they shipped my CPU cooler quickly and I didn’t have a problem. NewEgg.com is a well known company. I had never done business with them, but I’m glad I did. They shipped quickly and provided good visibility over everything. The prices were also the best in most cases. My main complaint is that they have a lot of exchange only return policies on components. To their credit those policies are listed in the cart underneath each item. The visibility tells me that they’re not playing any shenanigans and made me comfortable dealing with that risk. The vast majority of what I ordered came from them. Coming Next In the next part I’ll tackle my build experience.

    Read the article

  • How to deal with transport level security policy with OSB

    - by Jian Liang
    Recently, we received a use case for Oracle Service Bus (OSB) 11gPS4 to consume a Web Service which is secured by HTTP transport level security policy. The WSDL of the remote web service looks like following where the part marked in red shows the security policy: <?xml version='1.0' encoding='UTF-8'?> <definitions xmlns:wssutil="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="https://httpsbasicauth" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://schemas.xmlsoap.org/wsdl/" targetNamespace="https://httpsbasicauth" name="HttpsBasicAuthService"> <wsp:UsingPolicy wssutil:Required="true"/> <wsp:Policy wssutil:Id="WSHttpBinding_IPartyServicePortType_policy"> <wsp:ExactlyOne> <wsp:All> <ns1:TransportBinding xmlns:ns1="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy"> <wsp:Policy> <ns1:TransportToken> <wsp:Policy> <ns1:HttpsToken RequireClientCertificate="false"/> </wsp:Policy> </ns1:TransportToken> <ns1:AlgorithmSuite> <wsp:Policy> <ns1:Basic256/> </wsp:Policy> </ns1:AlgorithmSuite> <ns1:Layout> <wsp:Policy> <ns1:Strict/> </wsp:Policy> </ns1:Layout> </wsp:Policy> </ns1:TransportBinding> <ns2:UsingAddressing xmlns:ns2="http://www.w3.org/2006/05/addressing/wsdl"/> </wsp:All> </wsp:ExactlyOne> </wsp:Policy> <types> <xsd:schema> <xsd:import namespace="https://proxyhttpsbasicauth" schemaLocation="http://localhost:7001/WS/HttpsBasicAuthService?xsd=1"/> </xsd:schema> <xsd:schema> <xsd:import namespace="https://httpsbasicauth" schemaLocation="http://localhost:7001/WS/HttpsBasicAuthService?xsd=2"/> </xsd:schema> </types> <message name="echoString"> <part name="parameters" element="tns:echoString"/> </message> <message name="echoStringResponse"> <part name="parameters" element="tns:echoStringResponse"/> </message> <portType name="HttpsBasicAuth"> <operation name="echoString"> <input message="tns:echoString"/> <output message="tns:echoStringResponse"/> </operation> </portType> <binding name="HttpsBasicAuthSoapPortBinding" type="tns:HttpsBasicAuth"> <wsp:PolicyReference URI="#WSHttpBinding_IPartyServicePortType_policy"/> <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/> <operation name="echoString"> <soap:operation soapAction=""/> <input> <soap:body use="literal"/> </input> <output> <soap:body use="literal"/> </output> </operation> </binding> <service name="HttpsBasicAuthService"> <port name="HttpsBasicAuthSoapPort" binding="tns:HttpsBasicAuthSoapPortBinding"> <soap:address location="https://localhost:7002/WS/HttpsBasicAuthService"/> </port> </service> </definitions> The security assertion in the WSDL (marked in red) indicates that this is the HTTP transport level security policy which requires one way SSL with default authentication (aka. basic authenticate with username/password). Normally, there are two ways to handle web service security policy with OSB 11g: Use WebLogic 9.x policy Use OWSM Since OSB doesn’t support WebLogic 9.x WSSP transport level assertion (except for WS transport), when we tried to create the business service based on the imported WSDL, OSB complained with the following message: [OSB Kernel:398133]The service is based on WSDL with Web Services Security Policies that are not natively supported by Oracle Service Bus. Please select OWSM Policies - From OWSM Policy Store option and attach equivalent OWSM security policy. For the Business Service, either you can add the necessary client policies manually by clicking Add button or you can let Oracle Service Bus automatically pick and add compatible client policies by clicking Add Compatible button. Unfortunately, when tried with OWSM, we couldn’t find http_token_policy from OWSM since OSB PS4 doesn’t support OWSM http_token_policy. It seems that we ran into an unsupported situation that no appropriate policy can be used from both WebLogic and OWSM. As this security policy requires one way SSL with basic authentication at the transport level, a possible workaround is to meet the remote service's requirement at transport level without using web service policy. We can simply use OSB to establish SSL connection and provide username/password for authentication at the transport level to the remote web service. In this case, the business service within OSB will be transparent to the web service policy. However, we still need to deal with OSB console’s complaint related to unsupported security policy because the failure of WSDL validation prohibits OSB console to move forward. With the help from OSB Product Management team, we finally came up with the following solutions: Solution 1: OSB PS5 The good news is that the http_token_policy is made available in OSB PS5. With OSB PS5, you can simply add OWSM oracle/wss_http_token_over_ssl_client_policy to the business service. The simplest solution is to upgrade to OSB PS5 where the OWSM solution is provided out of the box. But if you are not in a position where upgrading is an immediate option, you might want to consider other two workaround solutions described below. Solution 2: Modifying WSDL This solution addresses OSB console’s complaint by removing the security policy from the imported WSDL within OSB. Without the security policy, OSB console allows the business service to be created based on modified WSDL.  Please bear in mind, modifying WSDL is done only for the OSB side via OSB console, no change is required on the remote Web Service. The main steps of this solution: Connect to OSB console import the remote WSDL into OSB remove security assertion (the red marked part) from the imported WSDL create a service account. In our sample, we simply take the user weblogic create the business service and check "Basic" for Authentication and select the created service account make sure that OSB consumes the web service via https. This solution requires modifying WSDL. It is suitable for any OSB version (10g or OSB 11g version) prior to PS5 without OWSM. However, modifying WSDL by hand is troublesome as it requires the user to remember that the original WSDL was edited.  It forces you to make the same edit each time you want to re-import the service WSDL when changes occur at the service level. This also prevents you from using UDDI to import WSDL.  Solution 3: Using original WSDL This solution keeps the WSDL intact and ignores the embedded policy by using OWSM. By design, OWSM doesn’t like WSDL with embedded security assertion. Since OWSM doesn’t provide the feature to explicitly ignore the embedded policy from a remote WSDL, in this solution, we use OWSM in a tricky way to ignore the embedded policy. Connect to OSB console import the remote WSDL into OSB create a service account create the business service in which check "Basic" for Authentication and select the created service account as the imported WSDL is intact, the OSB Kernel:398133 error is expected ignore this error message for the moment and navigate to the Policies Page of business service Select “From OWSM Policy Store” and click “Add” button, the list of policies will pop-up Here is the tricky part: select an arbitrary policy, and click “Cancel” Update and save By clicking “Cancel’ button, we didn’t add any OWSM policy to business service, but the embedded policy is ignored. Yes, this is tricky. According to Oracle OSB Product Manager, the future release of OWSM will add a button “None” which allows to ignore the embedded policy explicitly. This solution keeps the imported WSDL intact which is the big advantage over the solution 2. It is suitable for OSB 11g (version prior to PS5) domain with OWSM configured. This blog addressed the unsupported transport level web service security policy with OSB PS4. To summarize, if you are using OSB PS5 or in a position to upgrade to PS5, the recommendation is to use OWSM OOTB transport level security policy directly. With the release prior to 11g PS5, you can consider the solution 2 or 3 depending on if OWSM is configured.

    Read the article

  • Internationalize WebCenter Portal - Content Presenter

    - by Stefan Krantz
    Lately we have been involved in engagements where internationalization has been holding the project back from success. In this post we are going to explain how to get Content Presenter and its editorials to comply with the current selected locale for the WebCenter Portal session. As you probably know by now WebCenter Portal leverages the Localization support from Java Server Faces (JSF), in this post we will assume that the localization is controlled and enforced by switching the current browsers locale between English and Spanish. There is two main scenarios in internationalization of a content enabled pages, since Content Presenter offers both presentation of information as well as contribution of information, in this post we will look at how to enable seamless integration of correct localized version of the back end content file and how to enable the editor/author to edit the correct localized version of the file based on the current browser locale. Solution Scenario 1 - Localization aware content presentation Due to the amount of steps required to implement the enclosed solution proposal I have decided to share the solution with you in group components for each facet of the solution. If you want to get more details on each step, you can review the enclosed components. This post will guide you through the steps of enabling each component and what it enables/changes in each section of the system. Enable Content Presenter Customization By leveraging a predictable naming convention of the data files used to hold the content for the Content Presenter instance we can easily develop a component that will dynamically switch the name out before presenting the information. The naming convention we have leverage is the industry best practice by having a shared identifier as prefix (ContentABC) and a language enabled suffix (_EN) (_ES). So the assumption is that each file pair in above example should look like following:- English version - (ContentABC_EN)- Spanish version - (ContentABC_ES) Based on above theory we can now easily regardless of the primary version assigned to the content presenter instance switch the language out by using the localization support from JSF. Below java bean (oracle.webcenter.doclib.internal.view.presenter.NLSHelperBean) is enclosed in the customization project available for download at the bottom of the post: 1: public static final String CP_D_DOCNAME_FORMAT = "%s_%s"; 2: public static final int CP_UNIQUE_ID_INDEX = 0; 3: private ContentPresenter presenter = null; 4:   5:   6: public NLSHelperBean() { 7: super(); 8: } 9:   10: /** 11: * This method updates the configuration for the pageFlowScope to have the correct datafile 12: * for the current Locale 13: */ 14: public void initLocaleForDataFile() { 15: String dataFile = null; 16: // Checking that state of presenter is present, also make sure the item is eligible for localization by locating the "_" in the name 17: if(presenter.getConfiguration().getDatasource() != null && 18: presenter.getConfiguration().getDatasource().isNodeDatasource() && 19: presenter.getConfiguration().getDatasource().getNodeIdDatasource() != null && 20: !presenter.getConfiguration().getDatasource().getNodeIdDatasource().equals("") && 21: presenter.getConfiguration().getDatasource().getNodeIdDatasource().indexOf("_") > 0) { 22: dataFile = presenter.getConfiguration().getDatasource().getNodeIdDatasource(); 23: FacesContext fc = FacesContext.getCurrentInstance(); 24: //Leveraging the current faces contenxt to get current localization language 25: String currentLocale = fc.getViewRoot().getLocale().getLanguage().toUpperCase(); 26: String newDataFile = dataFile; 27: String [] uniqueIdArr = dataFile.split("_"); 28: if(uniqueIdArr.length > 0) { 29: newDataFile = String.format(CP_D_DOCNAME_FORMAT, uniqueIdArr[CP_UNIQUE_ID_INDEX], currentLocale); 30: } 31: //Replacing the current Node datasource with localized datafile. 32: presenter.getConfiguration().getDatasource().setNodeIdDatasource(newDataFile); 33: } 34: } With this bean code available to our WebCenter Portal implementation we can start the next step, by overriding the standard behavior in content presenter by applying a MDS Taskflow customization to the content presenter taskflow, following taskflow customization has been applied to the customization project attached to this post:- Library: WebCenter Document Library Service View- Path: oracle.webcenter.doclib.view.jsf.taskflows.presenter- File: contentPresenter.xml Changes made in above customization view:1. A new method invocation activity has been added (initLocaleForDataFile)2. The method invocation invokes the new NLSHelperBean3. The default activity is moved to the new Method invocation (initLocaleForDataFile)4. The outcome from the method invocation goes to determine-navigation (original default activity) The above changes concludes the presentation modification to support a compatible localization scenario for a content driven page. In addition this customization do not limit or disables the out of the box capabilities of WebCenter Portal. Steps to enable above customization Start JDeveloper and open your WebCenter Portal Application Select "Open Project" and include the extracted project you downloaded (CPNLSCustomizations.zip) Make sure the build out put from CPNLSCustomizations project is a dependency to your Portal project Deploy your Portal Application to your WC_CustomPortal managed server Make sure your naming convention of the two data files follow above recommendation Example result of the solution: Solution Scenario 2 - Localization aware content creation and authoring As you could see from Solution Scenario 1 we require the naming convention to be strictly followed, this means in the hands of a user with limited technology knowledge this can be one of the failing links in this solutions. Therefore I strongly recommend that you also follow this part since this will eliminate this risk and also increase the editors/authors usability with a magnitude. The current WebCenter Portal Architecture leverages WebCenter Content today to maintain, publish and manage content, therefore we need to make few efforts in making sure this part of the architecture is on board with our new naming practice and also simplifies the creation of content for our end users. As you probably remember the naming convention required a prefix to be common so I propose we enable a new component that help you auto name the content items dDocName (this means that the readable title can still be in a human readable format). The new component (WCP-LocalizationSupport.zip) built for this scenario will enable a couple of things: 1. A new service where a sequential number can be generate on request - service name: GET_WCP_LOCALE_CONTENTID 2. The content presenter is leveraging a specific function when launching the content creation wizard from within Content Presenter. Assumption is that users will create the content by clicking "Create Web Content" button. When clicking the button the wizard opened is actually running in side of WebCenter Content server, file executed (contentwizard.hcsp). This file uses JSON commands that will generate operations in the content server, I have extend this file to create two identical data files instead of one.- First it creates the English version by leveraging the new Service and a Global Rule to set the dDocName on the original check in screen, this global rule is available in a configuration package attached to this blog (NLSContentProfileRule.zip)- Secondly we run a set of JSON javascripts to create the Spanish version with the same details except for the name where we replace the suffix with (_ES)- Then content creation wizard ends with its out of the box behavior and assigns the Content Presenter instance the English versionSee Javascript markup below - this can be changed in the (WCP-LocalizationSupport.zip/component/WCP-LocalizationSupport/publish/webcenter) 1: //---------------------------------------A-TEAM--------------------------------------- 2: WCM.ContentWizard.CheckinContentPage.OnCheckinComplete = function(returnParams) 3: { 4: var callback = WCM.ContentWizard.CheckinContentPage.checkinCompleteCallback; 5: WCM.ContentWizard.ChooseContentPage.OnSelectionComplete(returnParams, callback); 6: // Load latest DOC_INFO_SIMPLE 7: var cgiPath = DOCLIB.config.httpCgiPath; 8: var jsonBinder = new WCM.Idc.JSONBinder(); 9: jsonBinder.SetLocalDataValue('IdcService', 'DOC_INFO_SIMPLE'); 10: jsonBinder.SetLocalDataValue('dID', returnParams.dID); 11: jsonBinder.Send(cgiPath, $CB(this, function(http) { 12: var ret = http.GetResponseText(); 13: var binder = new WCM.Idc.JSONBinder(ret); 14: var dDocName = binder.GetResultSetValue('DOC_INFO', 'dDocName', 0); 15: if(dDocName.indexOf("_") > 0){ 16: var ssBinder = new WCM.Idc.JSONBinder(); 17: ssBinder.SetLocalDataValue('IdcService', 'SS_CHECKIN_NEW'); 18: //Additional Localization dDocName generated 19: ssBinder.SetLocalDataValue('dDocName', getLocalizedDocName(dDocName, "es")); 20: ssBinder.SetLocalDataValue('primaryFile', 'default.xml'); 21: ssBinder.SetLocalDataValue('ssDefaultDocumentToken', 'SSContributorDataFile'); 22:   23: for(var n = 0 ; n < binder.GetResultSetFields('DOC_INFO').length ; n++) { 24: var field = binder.GetResultSetFields('DOC_INFO')[n]; 25: if(field != 'dID' && 26: field != 'dDocName' && 27: field != 'dID' && 28: field != 'dReleaseState' && 29: field != 'dRevClassID' && 30: field != 'dRevisionID' && 31: field != 'dRevLabel') { 32: ssBinder.SetLocalDataValue(field, binder.GetResultSetValue('DOC_INFO', field, 0)); 33: } 34: } 35: ssBinder.Send(cgiPath, $CB(this, function(http) {})); 36: } 37: })); 38: } 39:   40: //Support function to create localized dDocNames 41: function getLocalizedDocName(dDocName, lang) { 42: var result = dDocName.replace("_EN", ("_" + lang)); 43: return result; 44: } 45: //---------------------------------------A-TEAM--------------------------------------- 3. By applying the enclosed NLSContentProfileRule.zip, the check in screen for DataFile creation will have auto naming enabled with localization suffix (default is English)You can change the default language by updating the GlobalNlsRule and assign preferred prefix.See Rule markup for dDocName field below: <$executeService("GET_WCP_LOCALE_CONTENTID")$><$dprDefaultValue=WCP_LOCALE.LocaleContentId & "_EN"$> Steps to enable above extensions and configurations Install WebCenter Component (WCP-LocalizationSupport.zip), via the AdminServer in WebCenter Content Administration menus Enable the component and restart the content server Apply the configuration bundle to enable the new Global Rule (GlobalNlsRule), via the WebCenter Content Administration/Config Migration Admin New Content Creation Experience Result Content EditingContent editing will by default be enabled for authoring in the current select locale since the content file is selected by (Solution Scenario 1), this means that a user can switch his browser locale and then get the editing experience adaptable to the current selected locale. NotesA-Team are planning to post a solution on how to inline switch the locale of the WebCenter Portal Session, so the Content Presenter, Navigation Model and other Face related features are localized accordingly. Content Presenter examples used in this post is an extension to following post:https://blogs.oracle.com/ATEAM_WEBCENTER/entry/enable_content_editing_of_iterative Downloads CPNLSCustomizations.zip - WebCenter Portal, Content Presenter Customization https://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/CPNLSCustomizations.zip WCP-LocalizationSupport.zip - WebCenter Content, Extension Component to enable localization creation of files with compliant auto naminghttps://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/WCP-LocalizationSupport.zip NLSContentProfileRule.zip - WebCenter Content, Configuration Update Bundle to enable Global rule for new check in naming of data fileshttps://blogs.oracle.com/ATEAM_WEBCENTER/resource/stefan.krantz/NLSContentProfileRule.zip

    Read the article

  • Day 2 - Game Design Documentation

    - by dapostolov
    So yesterday I didn't cut any code for my game but I was able to do a tiny bit of research on the XNA Game Development Technology and the communities out there and do you know what? I feel I'm a bit closer to my goal. The bad news is today I didn't cut code either. However, not all is lost because I wanted to get my ideas on paper and today I just did that.  Today, I began to jot down notes about the game and how I felt the visual elements would interact with each other. Unlike my workplace, my personal level of documentation is nothing more than a task list or a mind map of my ideas; it helps me streamline my solutions quiet effectively and circumvent the long process of articulating each thought to the n-th degree. I truly dislike documentation (because I have an extremely hard time articulating my thought and solutions); however, because I tend to do a really good job with documentation I tend to get stuck writing the buggers. But as a generalist remark: 'No Developer likes documentation.' For now let's stick with my basic notes and call this post a living document. Here are my notes, fresh, from after watching the new first episode of Merlin second season! Actually, a quick recommendation to anyone who is reading this (if anyone is): I truly recommend you envelope yourself in the medium or task you're trying to tackle. Be one with moment and feel it! For instance: Are you writing a fantasy script / game? What would the music of the genre sound like? For me the Conan the Barbarian soundtrack by Basil Poledouris is frackin awesome. There are many other good CD's out there, which I listen to (some who even use medival instruments, but Conan I keep returning to. It's a creative trigger for me. Ask yourself what would the imagery look like? Time to surf google for artist renditions of fantasy! What would the game feel like? Start playing some of your favorite games that inspire you, be wary though, have some self control and don't let it absorb your time. Anyhow, onto the documentation... Screens, Scenes, and Sprites. Oh My! (groan...) The first thing that came to mind were the screens, I thought the following would suffice: Menu Screen Character Customisation Screen Loading Screen? Battle Ground The Menu Screen Ok. So, the thought here is when the game loads a huge title is displayed: Wizard Wars. The player is prompted with 3 menu items: 1 Player Game, 2 Player Game, and Exit. Since I'm targetting the PC platform, as a non-networked game to start, I picture myself running my mouse over each menu option and the visual element of the menu item changes, along with a sound to indicate that I am over a curent menu item. And as I move my mouse away, it changes back, and possibly an exit mouse sound. Maybe on the screen somewhere is a brazier alit with a magical tome open right beside it, OR, maybe the tome is the menu! I hear the menu music as mellow, not obtrusive or piercing. On a menu item select, a confirmation sound bellows to indicate the players selection. The Esc key will always return me to the previous screens or desktop. The menu screen must feel...dark, like a really important ritual is about to happen and thus the music should build up. 1 Player Game - > Customize Character(s) 2 Player Game - > Customize Character(s) Exit - > Back to Windows Notes: So the first thing I pick up here are a couple things: First and foremost, my artistic abilities suck crap, so I may have to hire an artist (now that i've said that, lets get techy) graphical objects will be positioned within a scene on each screen / window. Menu items will be represented grapically, possibly animated, and have sound / animation effects triggered by user input or a time line. I have an animated scene involving a brazier or fire on a stick IF I was to move this game to the xbox, I'd have to track which menu item is currently selected (unless I do a mouse pointer type thing.) WindowObject has a scene A Scene has many GameObjects GameObject has a position graphic or animation MenuObject is a GameObject which has a mouse in, mouse out, and click event which either does something graphically (animation), does something with sound, or moves to another screen.  Character Customisation Screen With either the 1 or 2 player option selected, both selections will come to this screen; a wizard requires a name, powers, and vestements of course! Player one will configure his character first and then player two. I considered a split screen for PC but to have two people fighting over a keyboard would probably suck. For XBox, a split screen could work; maybe when I get into the networking portion (phase 2 blog?) of this game I will remove the 2 player option for PC and provide only multiplayer and I will leave 2 player for xbox...hmm... Anyhow...I picture the creation process as follows: Name: (textbox / keyboard entry) - for xbox, this would have to be different. Robe Color: (color box, or something) Stats: Speed, Oomph, and Health. (as sliders) 1 as minimum and 10 as maximum. Ok, Back, and Cancel buttons / options. Each stat has a benefit which are listed below. The idea is the player decides if he wants his wizard to run fast, be a tank and ... hit with a purse.Regardless, the player will have a pool of 12 points to use. Ideally, A balanced wizard will have 5 in each attribute. Spells? The only spell of choice is a ball of fire which comes without question. The music and screen should still feel like a ritual. The Character Speed Basically, how fast your character moves and casts. Oomph (Best Monster Truck Voice): PURE POWAH!!! The damage output of your fireball. Health How much damage you can take. Notes: I realise the game dynamics may sound uninteresting at the moment; but I think after a couple releases, we could have some other grand ideas such as: saved profiles, gold to upgrade arsenal of spells, talents, etc...but for now...a vanilla fireball thrower mage will suffice for this experiment. OK. So... a MenuObject  may need to be loosely coupled to allow future items such as networking? may be a button? a CharacterObject has a name speed oomph health and a funky robe color. cap on the three stats (1-10) an arsenal of 1 spell (possibly could expand this) The Loading Screen As is. The Battleground Screen For now, I'm keeping the screen as max resolution for the PC. The screen isn't going to move or even be a split screen. I'm not aiming high here because I want to see what level of change is involved when new features / concepts are added to game content. I'm interested to find out if we could apply techniques such as MVC or MVVM to this type of development or is it too tightly coupled? This reminds me when when my best friend and I were brainstorming our game idea (this is going back a while...1994, 6?) and he cringed at the thought of bringing business technology into games, especially when I suggested a database to store character information and COM / DCOM as the medium, but it seems I wasn't far off (reflecting); just like his implementation of a xml "config file" for dynamic direct-x menus back before .net in 1999...anyhow...i digress... The Battle One screen, two characters lobing balls of fire at each other...It doesn't get better than that. Every so often a scroll appears...and the fireballs bounce off walls, or the wizard has rapid fire, or even scrolls of healing! The scroll options are endless. Two bars at the top, each the color of the wizard (with their name beside the bar) indicate how much health they have. Possibly the appearance of the scrolls means the battle is taking too long? I'm thinking 1 player controls: up, down, left, right and space to fire the button. Or even possibly, mouse click and shift - mouse button to fire a spell in the direction they are facing. Two player controls: a, s, d, f and space AND arrows (up, down, left, right) and Del key or Crtl. The game ends when a player has 0 health and a dialog box appears asking for a rematch / reconfigure / exit. Health goes down when a fireball (friendly or not), connects with a wizard. When a wizard connects with a scroll, a countdown clock / icon appears near the health bar and the wizard begins to glow. For the most part, a wizard can have only scroll 1 effect on him at a time. Notes: Ok, there's alot to cover here. a CharacterObject is a GameObject it travels at a set velocity it travels in a direction it has sounds (walking, running, casting, impact, dying, laughing, whistling, other?) it has animations (walking, running, casting, impact, dying, laughing, idle, other?) it has a lifespan (determined by health) it is alive or dead it has a position a ScrollObject is a GameObject it carries a transferance of points "damage" (or healing, bad scroll effect?) (determinde by caster) it carries a transferance of "other" it is stationary it has a sound on impact it has a stationary animation it has an impact animation / or transfers an impact animation it has a fade animation? it has a lifespan (determined by game) it is alive or dead it has a position a WallObject is a GameObject it has a sound on fireball impact? it is a still image / stationary it has an impact animation / or transfers an impact animation it is dead it has a position A FireBall is a GameObject it carries a transferance of poinst "damage" (or healing, bad scroll effect?) (determinde by caster) it travels at a set velocity it travels in a direction it has a sound it has a travel animation it has an impact animation / or transfers an impact animation it has a fade animation? it has a lifespan (determined by caster) it is alive or dead it has a position As I look at this, I can see some common attributes in each object that I can carry up to the GameObject. I think I'm going to end the documentation here, it's taken me a bit of time to type this all out, tomorrow. I'll load up my IDE and my paint studio to get some good old fashioned cowboy hacking going!   D.

    Read the article

  • Creating HTML5 Offline Web Applications with ASP.NET

    - by Stephen Walther
    The goal of this blog entry is to describe how you can create HTML5 Offline Web Applications when building ASP.NET web applications. I describe the method that I used to create an offline Web application when building the JavaScript Reference application. You can read about the HTML5 Offline Web Application standard by visiting the following links: Offline Web Applications Firefox Offline Web Applications Safari Offline Web Applications Currently, the HTML5 Offline Web Applications feature works with all modern browsers with one important exception. You can use Offline Web Applications with Firefox, Chrome, and Safari (including iPhone Safari). Unfortunately, however, Internet Explorer does not support Offline Web Applications (not even IE 9). Why Build an HTML5 Offline Web Application? The official reason to build an Offline Web Application is so that you do not need to be connected to the Internet to use it. For example, you can use the JavaScript Reference Application when flying in an airplane, riding a subway, or hiding in a cave in Borneo. The JavaScript Reference Application works great on my iPhone even when I am completely disconnected from any network. The following screenshot shows the JavaScript Reference Application running on my iPhone when airplane mode is enabled (notice the little orange airplane):   Admittedly, it is becoming increasingly difficult to find locations where you can’t get Internet access. A second, and possibly better, reason to create Offline Web Applications is speed. An Offline Web Application must be downloaded only once. After it gets downloaded, all of the files required by your Web application (HTML, CSS, JavaScript, Image) are stored persistently on your computer. Think of Offline Web Applications as providing you with a super browser cache. Normally, when you cache files in a browser, the files are cached on a file-by-file basis. For each HTML, CSS, image, or JavaScript file, you specify how long the file should remain in the cache by setting cache headers. Unlike the normal browser caching mechanism, the HTML5 Offline Web Application cache is used to specify a caching policy for an entire set of files. You use a manifest file to list the files that you want to cache and these files are cached until the manifest is changed. Another advantage of using the HTML5 offline cache is that the HTML5 standard supports several JavaScript events and methods related to the offline cache. For example, you can be notified in your JavaScript code whenever the offline application has been updated. You can use JavaScript methods, such as the ApplicationCache.update() method, to update the cache programmatically. Creating the Manifest File The HTML5 Offline Cache uses a manifest file to determine the files that get cached. Here’s what the manifest file looks like for the JavaScript Reference application: CACHE MANIFEST # v30 Default.aspx # Standard Script Libraries Scripts/jquery-1.4.4.min.js Scripts/jquery-ui-1.8.7.custom.min.js Scripts/jquery.tmpl.min.js Scripts/json2.js # App Scripts App_Scripts/combine.js App_Scripts/combine.debug.js # Content (CSS & images) Content/default.css Content/logo.png Content/ui-lightness/jquery-ui-1.8.7.custom.css Content/ui-lightness/images/ui-bg_glass_65_ffffff_1x400.png Content/ui-lightness/images/ui-bg_glass_100_f6f6f6_1x400.png Content/ui-lightness/images/ui-bg_highlight-soft_100_eeeeee_1x100.png Content/ui-lightness/images/ui-icons_222222_256x240.png Content/ui-lightness/images/ui-bg_glass_100_fdf5ce_1x400.png Content/ui-lightness/images/ui-bg_diagonals-thick_20_666666_40x40.png Content/ui-lightness/images/ui-bg_gloss-wave_35_f6a828_500x100.png Content/ui-lightness/images/ui-icons_ffffff_256x240.png Content/ui-lightness/images/ui-icons_ef8c08_256x240.png Content/browsers/c8.png Content/browsers/es3.png Content/browsers/es5.png Content/browsers/ff3_6.png Content/browsers/ie8.png Content/browsers/ie9.png Content/browsers/sf5.png NETWORK: Services/EntryService.svc http://superexpert.com/resources/JavaScriptReference/ A Cache Manifest file always starts with the line of text Cache Manifest. In the manifest above, all of the CSS, image, and JavaScript files required by the JavaScript Reference application are listed. For example, the Default.aspx ASP.NET page, jQuery library, JQuery UI library, and several images are listed. Notice that you can add comments to a manifest by starting a line with the hash character (#). I use comments in the manifest above to group JavaScript and image files. Finally, notice that there is a NETWORK: section of the manifest. You list any file that you do not want to cache (any file that requires network access) in this section. In the manifest above, the NETWORK: section includes the URL for a WCF Service named EntryService.svc. This service is called to get the JavaScript entries displayed by the JavaScript Reference. There are two important things that you need to be aware of when using a manifest file. First, all relative URLs listed in a manifest are resolved relative to the manifest file. The URLs listed in the manifest above are all resolved relative to the root of the application because the manifest file is located in the application root. Second, whenever you make a change to the manifest file, browsers will download all of the files contained in the manifest (all of them). For example, if you add a new file to the manifest then any browser that supports the Offline Cache standard will detect the change in the manifest and download all of the files listed in the manifest automatically. If you make changes to files in the manifest (for example, modify a JavaScript file) then you need to make a change in the manifest file in order for the new version of the file to be downloaded. The standard way of updating a manifest file is to include a comment with a version number. The manifest above includes a # v30 comment. If you make a change to a file then you need to modify the comment to be # v31 in order for the new file to be downloaded. When Are Updated Files Downloaded? When you make changes to a manifest, the changes are not reflected the very next time you open the offline application in your web browser. Your web browser will download the updated files in the background. This can be very confusing when you are working with JavaScript files. If you make a change to a JavaScript file, and you have cached the application offline, then the changes to the JavaScript file won’t appear when you reload the application. The HTML5 standard includes new JavaScript events and methods that you can use to track changes and make changes to the Application Cache. You can use the ApplicationCache.update() method to initiate an update to the application cache and you can use the ApplicationCache.swapCache() method to switch to the latest version of a cached application. My heartfelt recommendation is that you do not enable your application for offline storage until after you finish writing your application code. Otherwise, debugging the application can become a very confusing experience. Offline Web Applications versus Local Storage Be careful to not confuse the HTML5 Offline Web Application feature and HTML5 Local Storage (aka DOM storage) feature. The JavaScript Reference Application uses both features. HTML5 Local Storage enables you to store key/value pairs persistently. Think of Local Storage as a super cookie. I describe how the JavaScript Reference Application uses Local Storage to store the database of JavaScript entries in a separate blog entry. Offline Web Applications enable you to store static files persistently. Think of Offline Web Applications as a super cache. Creating a Manifest File in an ASP.NET Application A manifest file must be served with the MIME type text/cache-manifest. In order to serve the JavaScript Reference manifest with the proper MIME type, I added two files to the JavaScript Reference Application project: Manifest.txt – This text file contains the actual manifest file. Manifest.ashx – This generic handler sends the Manifest.txt file with the MIME type text/cache-manifest. Here’s the code for the generic handler: using System.Web; namespace JavaScriptReference { public class Manifest : IHttpHandler { public void ProcessRequest(HttpContext context) { context.Response.ContentType = "text/cache-manifest"; context.Response.WriteFile(context.Server.MapPath("Manifest.txt")); } public bool IsReusable { get { return false; } } } } The Default.aspx file contains a reference to the manifest. The opening HTML tag in the Default.aspx file looks like this: <html manifest="Manifest.ashx"> Notice that the HTML tag contains a manifest attribute that points to the Manifest.ashx generic handler. Internet Explorer simply ignores this attribute. Every other modern browser will download the manifest when the Default.aspx page is requested. Seeing the Offline Web Application in Action The experience of using an HTML5 Web Application is different with different browsers. When you first open the JavaScript Reference application with Firefox, you get the following warning: Notice that you are provided with the choice of whether you want to use the application offline or not. Browsers other than Firefox, such as Chrome and Safari, do not provide you with this choice. Chrome and Safari will create an offline cache automatically. If you click the Allow button then Firefox will download all of the files listed in the manifest. You can view the files contained in the Firefox offline application cache by typing about:cache in the Firefox address bar: You can view the actual items being cached by clicking the List Cache Entries link: The Offline Web Application experience is different in the case of Google Chrome. You can view the entries in the offline cache by opening the Developer Tools (hit Shift+CTRL+I), selecting the Storage tab, and selecting Application Cache: Notice that you view the status of the Application Cache. In the screen shot above, the status is UNCACHED which means that the files listed in the manifest have not been downloaded and cached yet. The different possible values for the status are included in the HTML5 Offline Web Application standard: UNCACHED – The Application Cache has not been initialized. IDLE – The Application Cache is not currently being updated. CHECKING – The Application Cache is being fetched and checked for updates. DOWNLOADING – The files in the Application Cache are being updated. UPDATEREADY – There is a new version of the Application. OBSOLETE – The contents of the Application Cache are obsolete. Summary In this blog entry, I provided a description of how you can use the HTML5 Offline Web Application feature in the context of an ASP.NET application. I described how this feature is used with the JavaScript Reference Application to store the entire application on a user’s computer. By taking advantage of this new feature of the HTML5 standard, you can improve the performance of your ASP.NET web applications by requiring users of your web application to download your application once and only once. Furthermore, you can enable users to take advantage of your applications anywhere -- regardless of whether or not they are connected to the Internet.

    Read the article

  • Metro: Query Selectors

    - by Stephen.Walther
    The goal of this blog entry is to explain how to perform queries using selectors when using the WinJS library. In particular, you learn how to use the WinJS.Utilities.query() method and the QueryCollection class to retrieve and modify the elements of an HTML document. Introduction to Selectors When you are building a Web application, you need some way of easily retrieving elements from an HTML document. For example, you might want to retrieve all of the input elements which have a certain class. Or, you might want to retrieve the one and only element with an id of favoriteColor. The standard way of retrieving elements from an HTML document is by using a selector. Anyone who has ever created a Cascading Style Sheet has already used selectors. You use selectors in Cascading Style Sheets to apply formatting rules to elements in a document. For example, the following Cascading Style Sheet rule changes the background color of every INPUT element with a class of .required in a document to the color red: input.red { background-color: red } The “input.red” part is the selector which matches all INPUT elements with a class of red. The W3C standard for selectors (technically, their recommendation) is entitled “Selectors Level 3” and the standard is located here: http://www.w3.org/TR/css3-selectors/ Selectors are not only useful for adding formatting to the elements of a document. Selectors are also useful when you need to apply behavior to the elements of a document. For example, you might want to select a particular BUTTON element with a selector and add a click handler to the element so that something happens whenever you click the button. Selectors are not specific to Cascading Style Sheets. You can use selectors in your JavaScript code to retrieve elements from an HTML document. jQuery is famous for its support for selectors. Using jQuery, you can use a selector to retrieve matching elements from a document and modify the elements. The WinJS library enables you to perform the same types of queries as jQuery using the W3C selector syntax. Performing Queries with the WinJS.Utilities.query() Method When using the WinJS library, you perform a query using a selector by using the WinJS.Utilities.query() method.  The following HTML document contains a BUTTON and a DIV element: <!DOCTYPE html> <html> <head> <meta charset="utf-8"> <title>Application1</title> <!-- WinJS references --> <link href="//Microsoft.WinJS.0.6/css/ui-dark.css" rel="stylesheet"> <script src="//Microsoft.WinJS.0.6/js/base.js"></script> <script src="//Microsoft.WinJS.0.6/js/ui.js"></script> <!-- Application1 references --> <link href="/css/default.css" rel="stylesheet"> <script src="/js/default.js"></script> </head> <body> <button>Click Me!</button> <div style="display:none"> <h1>Secret Message</h1> </div> </body> </html> The document contains a reference to the following JavaScript file named \js\default.js: (function () { "use strict"; var app = WinJS.Application; app.onactivated = function (eventObject) { if (eventObject.detail.kind === Windows.ApplicationModel.Activation.ActivationKind.launch) { WinJS.Utilities.query("button").listen("click", function () { WinJS.Utilities.query("div").clearStyle("display"); }); } }; app.start(); })(); The default.js script uses the WinJS.Utilities.query() method to retrieve all of the BUTTON elements in the page. The listen() method is used to wire an event handler to the BUTTON click event. When you click the BUTTON, the secret message contained in the hidden DIV element is displayed. The clearStyle() method is used to remove the display:none style attribute from the DIV element. Under the covers, the WinJS.Utilities.query() method uses the standard querySelectorAll() method. This means that you can use any selector which is compatible with the querySelectorAll() method when using the WinJS.Utilities.query() method. The querySelectorAll() method is defined in the W3C Selectors API Level 1 standard located here: http://www.w3.org/TR/selectors-api/ Unlike the querySelectorAll() method, the WinJS.Utilities.query() method returns a QueryCollection. We talk about the methods of the QueryCollection class below. Retrieving a Single Element with the WinJS.Utilities.id() Method If you want to retrieve a single element from a document, instead of matching a set of elements, then you can use the WinJS.Utilities.id() method. For example, the following line of code changes the background color of an element to the color red: WinJS.Utilities.id("message").setStyle("background-color", "red"); The statement above matches the one and only element with an Id of message. For example, the statement matches the following DIV element: <div id="message">Hello!</div> Notice that you do not use a hash when matching a single element with the WinJS.Utilities.id() method. You would need to use a hash when using the WinJS.Utilities.query() method to do the same thing like this: WinJS.Utilities.query("#message").setStyle("background-color", "red"); Under the covers, the WinJS.Utilities.id() method calls the standard document.getElementById() method. The WinJS.Utilities.id() method returns the result as a QueryCollection. If no element matches the identifier passed to WinJS.Utilities.id() then you do not get an error. Instead, you get a QueryCollection with no elements (length=0). Using the WinJS.Utilities.children() method The WinJS.Utilities.children() method enables you to retrieve a QueryCollection which contains all of the children of a DOM element. For example, imagine that you have a DIV element which contains children DIV elements like this: <div id="discussContainer"> <div>Message 1</div> <div>Message 2</div> <div>Message 3</div> </div> You can use the following code to add borders around all of the child DIV element and not the container DIV element: var discussContainer = WinJS.Utilities.id("discussContainer").get(0); WinJS.Utilities.children(discussContainer).setStyle("border", "2px dashed red");   It is important to understand that the WinJS.Utilities.children() method only works with a DOM element and not a QueryCollection. Notice that the get() method is used to retrieve the DOM element which represents the discussContainer. Working with the QueryCollection Class Both the WinJS.Utilities.query() method and the WinJS.Utilities.id() method return an instance of the QueryCollection class. The QueryCollection class derives from the base JavaScript Array class and adds several useful methods for working with HTML elements: addClass(name) – Adds a class to every element in the QueryCollection. clearStyle(name) – Removes a style from every element in the QueryCollection. conrols(ctor, options) – Enables you to create controls. get(index) – Retrieves the element from the QueryCollection at the specified index. getAttribute(name) – Retrieves the value of an attribute for the first element in the QueryCollection. hasClass(name) – Returns true if the first element in the QueryCollection has a certain class. include(items) – Includes a collection of items in the QueryCollection. listen(eventType, listener, capture) – Adds an event listener to every element in the QueryCollection. query(query) – Performs an additional query on the QueryCollection and returns a new QueryCollection. removeClass(name) – Removes a class from the every element in the QueryCollection. removeEventListener(eventType, listener, capture) – Removes an event listener from every element in the QueryCollection. setAttribute(name, value) – Adds an attribute to every element in the QueryCollection. setStyle(name, value) – Adds a style attribute to every element in the QueryCollection. template(templateElement, data, renderDonePromiseContract) – Renders a template using the supplied data.  toggleClass(name) – Toggles the specified class for every element in the QueryCollection. Because the QueryCollection class derives from the base Array class, it also contains all of the standard Array methods like forEach() and slice(). Summary In this blog post, I’ve described how you can perform queries using selectors within a Windows Metro Style application written with JavaScript. You learned how to return an instance of the QueryCollection class by using the WinJS.Utilities.query(), WinJS.Utilities.id(), and WinJS.Utilities.children() methods. You also learned about the methods of the QueryCollection class.

    Read the article

  • Integrating NetBeans for Raspberry Pi Java Development

    - by speakjava
    Raspberry Pi IDE Java Development The Raspberry Pi is an incredible device for building embedded Java applications but, despite being able to run an IDE on the Pi it really pushes things to the limit.  It's much better to use a PC or laptop to develop the code and then deploy and test on the Pi.  What I thought I'd do in this blog entry was to run through the steps necessary to set up NetBeans on a PC for Java code development, with automatic deployment to the Raspberry Pi as part of the build process. I will assume that your starting point is a Raspberry Pi with an SD card that has one of the latest Raspbian images on it.  This is good because this now includes the JDK 7 as part of the distro, so no need to download and install a separate JDK.  I will also assume that you have installed the JDK and NetBeans on your PC.  These can be downloaded here. There are numerous approaches you can take to this including mounting the file system from the Raspberry Pi remotely on your development machine.  I tried this and I found that NetBeans got rather upset if the file system disappeared either through network interruption or the Raspberry Pi being turned off.  The following method uses copying over SSH, which will fail more gracefully if the Pi is not responding. Step 1: Enable SSH on the Raspberry Pi To run the Java applications you create you will need to start Java on the Raspberry Pi with the appropriate class name, classpath and parameters.  For non-JavaFX applications you can either do this from the Raspberry Pi desktop or, if you do not have a monitor connected through a remote command line.  To execute the remote command line you need to enable SSH (a secure shell login over the network) and connect using an application like PuTTY. You can enable SSH when you first boot the Raspberry Pi, as the raspi-config program runs automatically.  You can also run it at any time afterwards by running the command: sudo raspi-config This will bring up a menu of options.  Select '8 Advanced Options' and on the next screen select 'A$ SSH'.  Select 'Enable' and the task is complete. Step 2: Configure Raspberry Pi Networking By default, the Raspbian distribution configures the ethernet connection to use DHCP rather than a static IP address.  You can continue to use DHCP if you want, but to avoid having to potentially change settings whenever you reboot the Pi using a static IP address is simpler. To configure this on the Pi you need to edit the /etc/network/interfaces file.  You will need to do this as root using the sudo command, so something like sudo vi /etc/network/interfaces.  In this file you will see this line: iface eth0 inet dhcp This needs to be changed to the following: iface eth0 inet static     address 10.0.0.2     gateway 10.0.0.254     netmask 255.255.255.0 You will need to change the values in red to an appropriate IP address and to match the address of your gateway. Step 3: Create a Public-Private Key Pair On Your Development Machine How you do this will depend on which Operating system you are using: Mac OSX or Linux Run the command: ssh-keygen -t rsa Press ENTER/RETURN to accept the default destination for saving the key.  We do not need a passphrase so simply press ENTER/RETURN for an empty one and once more to confirm. The key will be created in the file .ssh/id_rsa.pub in your home directory.  Display the contents of this file using the cat command: cat ~/.ssh/id_rsa.pub Open a window, SSH to the Raspberry Pi and login.  Change directory to .ssh and edit the authorized_keys file (don't worry if the file does not exist).  Copy and paste the contents of the id_rsa.pub file to the authorized_keys file and save it. Windows Since Windows is not a UNIX derivative operating system it does not include the necessary key generating software by default.  To generate the key I used puttygen.exe which is available from the same site that provides the PuTTY application, here. Download this and run it on your Windows machine.  Follow the instructions to generate a key.  I remove the key comment, but you can leave that if you want. Click "Save private key", confirm that you don't want to use a passphrase and select a filename and location for the key. Copy the public key from the part of the window marked, "Public key for pasting into OpenSSH authorized_keys file".  Use PuTTY to connect to the Raspberry Pi and login.  Change directory to .ssh and edit the authorized_keys file (don't worry if this does not exist).  Paste the key information at the end of this file and save it. Logout and then start PuTTY again.  This time we need to create a saved session using the private key.  Type in the IP address of the Raspberry Pi in the "Hostname (or IP address)" field and expand "SSH" under the "Connection" category.  Select "Auth" (see the screen shot below). Click the "Browse" button under "Private key file for authentication" and select the file you saved from puttygen. Go back to the "Session" category and enter a short name in the saved sessions field, as shown below.  Click "Save" to save the session. Step 4: Test The Configuration You should now have the ability to use scp (Mac/Linux) or pscp.exe (Windows) to copy files from your development machine to the Raspberry Pi without needing to authenticate by typing in a password (so we can automate the process in NetBeans).  It's a good idea to test this using something like: scp /tmp/foo [email protected]:/tmp on Linux or Mac or pscp.exe foo pi@raspi:/tmp on Windows (Note that we use the saved configuration name instead of the IP address or hostname so the public key is picked up). pscp.exe is another tool available from the creators of PuTTY. Step 5: Configure the NetBeans Build Script Start NetBeans and create a new project (or open an existing one that you want to deploy automatically to the Raspberry Pi). Select the Files tab in the explorer window and expand your project.  You will see a build.xml file.  Double click this to edit it. This file will mostly be comments.  At the end (but within the </project> tag) add the XML for <target name="-post-jar">, shown below Here's the code again in case you want to use cut-and-paste: <target name="-post-jar">   <echo level="info" message="Copying dist directory to remote Pi"/>   <exec executable="scp" dir="${basedir}">     <arg line="-r"/>     <arg value="dist"/>     <arg value="[email protected]:NetBeans/CopyTest"/>   </exec>  </target> For Windows it will be slightly different: <target name="-post-jar">   <echo level="info" message="Copying dist directory to remote Pi"/>   <exec executable="C:\pi\putty\pscp.exe" dir="${basedir}">     <arg line="-r"/>     <arg value="dist"/>     <arg value="pi@raspi:NetBeans/CopyTest"/>   </exec> </target> You will also need to ensure that pscp.exe is in your PATH (or specify a fully qualified pathname). From now on when you clean and build the project the dist directory will automatically be copied to the Raspberry Pi ready for testing.

    Read the article

  • Active directory authentication for Ubuntu Linux login and cifs mounting home directories...

    - by Jamie
    I've configured my Ubuntu 10.04 Server LTS Beta 2 residing on a windows network to authenticate logins using active directory, then mount a windows share to serve as there home directory. Here is what I did starting from the initial installation of Ubuntu. Download and install Ubuntu Server 10.04 LTS Beta 2 Get updates # sudo apt-get update && sudo apt-get upgrade Install an SSH server (sshd) # sudo apt-get install openssh-server Some would argue that you should "lock sshd down" by disabling root logins. I figure if your smart enough to hack an ssh session for a root password, you're probably not going to be thwarted by the addition of PermitRootLogin no in the /etc/ssh/sshd_config file. If your paranoid or not simply not convinced then edit the file or give the following a spin: # (grep PermitRootLogin /etc/ssh/sshd_conifg && sudo sed -ri 's/PermitRootLogin ).+/\1no/' /etc/ssh/sshd_conifg) || echo "PermitRootLogin not found. Add it manually." Install required packages # sudo apt-get install winbind samba smbfs smbclient ntp krb5-user Do some basic networking housecleaning in preparation for the specific package configurations to come. Determine your windows domain name, DNS server name, and IP address for the active directory server (for samba). For conveniance I set environment variables for the windows domain and DNS server. For me it was (my AD IP address was 192.168.20.11): # WINDOMAIN=mydomain.local && WINDNS=srv1.$WINDOMAIN If you want to figure out what your domain and DNS server is (I was contractor and didn't know the network) check out this helpful reference. The authentication and file sharing processes for the Windows and Linux boxes need to have their clocks agree. Do this with an NTP service, and on the server version of Ubuntu the NTP service comes installed and preconfigured. The network I was joining had the DNS server serving up the NTP service too. # sudo sed -ri "s/^(server[ \t]).+/\1$WINDNS/" /etc/ntp.conf Restart the NTP daemon # sudo /etc/init.d/ntp restart We need to christen the Linux box on the new network, this is done by editing the host file (replace the DNS of with the FQDN of the windows DNS): # sudo sed -ri "s/^(127\.0\.0\.1[ \t]).*/\1$(hostname).$WINDOMAIN localhost $(hostname)/" /etc/hosts Kerberos configuration. The instructions that follow here aren't to be taken literally: the values for MYDOMAIN.LOCAL and srv1.mydomain.local need to be replaced with what's appropriate for your network when you edit the files. Edit the (previously installed above) /etc/krb5.conf file. Find the [libdefaults] section and change (or add) the key value pair (and it is in UPPERCASE WHERE IT NEEDS TO BE): [libdefaults] default_realm = MYDOMAIN.LOCAL Add the following to the [realms] section of the file: MYDOMAIN.LOCAL = { kdc = srv1.mydomain.local admin_server = srv1.mydomain.local default_domain = MYDOMAIN.LOCAL } Add the following to the [domain_realm] section of the file: .mydomain.local = MYDOMAIN.LOCAL mydomain.local = MYDOMAIN.LOCAL Conmfigure samba. When it's all said done, I don't know where SAMBA fits in ... I used cifs to mount the windows shares ... regardless, my system works and this is how I did it. Replace /etc/samba/smb.conf (remember I was working from a clean distro of Ubuntu, so I wasn't worried about breaking anything): [global] security = ads realm = MYDOMAIN.LOCAL password server = 192.168.20.11 workgroup = MYDOMAIN idmap uid = 10000-20000 idmap gid = 10000-20000 winbind enum users = yes winbind enum groups = yes template homedir = /home/%D/%U template shell = /bin/bash client use spnego = yes client ntlmv2 auth = yes encrypt passwords = yes winbind use default domain = yes restrict anonymous = 2 Start and stop various services. # sudo /etc/init.d/winbind stop # sudo service smbd restart # sudo /etc/init.d/winbind start Setup the authentication. Edit the /etc/nsswitch.conf. Here are the contents of mine: passwd: compat winbind group: compat winbind shadow: compat winbind hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files Start and stop various services. # sudo /etc/init.d/winbind stop # sudo service smbd restart # sudo /etc/init.d/winbind start At this point I could login, home directories didn't exist, but I could login. Later I'll come back and add how I got the cifs automounting to work. Numerous resources were considered so I could figure this out. Here is a short list (a number of these links point to mine own questions on the topic): Samba Kerberos Active Directory WinBind Mounting Linux user home directories on CIFS server Authenticating OpenBSD against Active Directory How to use Active Directory to authenticate linux users Mounting windows shares with Active Directory permissions Using Active Directory authentication with Samba on Ubuntu 9.10 server 64bit How practical is to authenticate a Linux server against AD? Auto-mounting a windows share on Linux AD login

    Read the article

  • Secondary DHCP server won't start on Centos 6.2

    - by Slowjoe
    I'm trying to create a backup DHCP server. Server times are in sync. Primary server starts fine. Secondary server won't start. Error from /var/log/messages is: Sep 15 14:47:45 stream dhcpd: Copyright 2004-2010 Internet Systems Consortium. Sep 15 14:47:45 stream dhcpd: All rights reserved. Sep 15 14:47:45 stream dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 25: invalid statement in peer declaration Sep 15 14:47:45 stream dhcpd: #011max-response-default Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 41: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 49: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: WARNING: Host declarations are global. They are not limited to the scope you declared them in. Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 70: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 78: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: Configuration file errors encountered -- exiting Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: This version of ISC DHCP is based on the release available Sep 15 14:47:45 stream dhcpd: on ftp.isc.org. Features have been added and other changes Sep 15 14:47:45 stream dhcpd: have been made to the base software release in order to make Sep 15 14:47:45 stream dhcpd: it work better with this distribution. Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: Please report for this software via the CentOS Bugs Database: Sep 15 14:47:45 stream dhcpd: http://bugs.centos.org/ Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: exiting. Config file contents: # DHCP Server Configuration file. # see /usr/share/doc/dhcp*/dhcpd.conf.sample # see 'man 5 dhcpd.conf' # option domain-name "eng.foo.com"; option domain-name-servers ns0.eng.foo.com, ns1.eng.foo.com; option ntp-servers ntp.eng.foo.com; #option time-servers ntp.eng.foo.com; default-lease-time 3600; max-lease-time 7200; authoritative; log-facility local7; failover peer "dhcp-failover" { secondary; address 10.0.1.70; port 647; peer address 10.0.1.11; peer port 647; max-response-default 30; max-unacked-updates 10; load balance max seconds 3; } # # Management subnet # subnet 10.0.0.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; option broadcast-address 10.0.0.255; option routers 10.0.0.1; option domain-search "eng.foo.com", "foo.com"; # Unknown clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 300; range 10.0.0.240 10.0.0.249; allow unknown-clients; } # Known clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 28800; range 10.0.0.150 10.0.0.199; deny unknown-clients; } include "/etc/dhcp/dhcpd.conf-engmgmt"; } # # Data subnet # subnet 10.0.1.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; option broadcast-address 10.0.1.255; option routers 10.0.1.1; option domain-search "eng.foo.com", "foo.com"; # Unknown clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 300; range 10.0.1.240 10.0.1.249; allow unknown-clients; } # Known clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 28800; range 10.0.1.150 10.0.1.199; deny unknown-clients; } # For centos network installs if substring (option vendor-class-identifier, 0, 8) = "anaconda" { filename "/autohome/distro/ks/"; next-server eng-data.eng.foo.com; } # For PXE network installs if substring (option vendor-class-identifier, 0, 9) = "PXEClient" { filename "pxelinux.0"; next-server eng-data.eng.foo.com; } # For KVM PXE network installs if substring (option vendor-class-identifier, 0, 9) = "Etherboot" { filename "pxelinux.0"; next-server eng-data.eng.foo.com; } include "/etc/dhcp/dhcpd.conf-engdata"; }

    Read the article

  • Clusterware 11gR2 &ndash; Setting up an Active/Passive failover configuration

    - by Gilles Haro
    Oracle is providing a large range of interesting solutions to ensure High Availability of the database. Dataguard, RAC or even both configurations (as recommended by Oracle for a Maximum Available Architecture - MAA) are the most frequently found and used solutions. But, when it comes to protecting a system with an Active/Passive architecture with failover capabilities, people often thinks to other expensive third party cluster systems. Oracle Clusterware technology, which comes along at no extra-cost with Oracle Database or Oracle Unbreakable Linux, is - in the knowing of most people - often linked to Oracle RAC and therefore, is seldom used to implement failover solutions. Oracle Clusterware 11gR2  (a part of Oracle 11gR2 Grid Infrastructure)  provides a comprehensive framework to setup automatic failover configurations. It is actually possible to make "failover-able'", and then to protect, almost any kind of application (from the simple xclock to the most complex Application Server). Quoting Oracle: “Oracle Clusterware is a portable cluster software that allows clustering of single servers so that they cooperate as a single system. Oracle Clusterware also provides the required infrastructure for Oracle Real Application Clusters (RAC). In addition Oracle Clusterware enables the protection of any Oracle application or any other kind of application within a cluster.” In the next couple of lines, I will try to present the different steps to achieve this goal : Have a fully operational 11gR2 database protected by automatic failover capabilities. I assume you are fluent in installing Oracle Database 11gR2, Oracle Grid Infrastructure 11gR2 on a Linux system and that ASM is not a problem for you (as I am using it as a shared storage). If not, please have a look at Oracle Documentation. As often, I made my tests using an Oracle VirtualBox environment. The scripts are tested and functional on my system. Unfortunately, there can always be a typo or a mistake. This blog entry does not replace a course around the Clusterware Framework. I just hope it will let you see how powerful it is and that it will give you the whilst to go further with it...  Note : This entry has been revised (rev.2) following comments from Philip Newlan. Prerequisite 2 Linux boxes (OELCluster01 and OELCluster02) at the same OS level. I used OEL 5 Update 5 with an Enterprise Kernel. Shared Storage (SAN). On my VirtualBox system, I used Openfiler to simulate the SAN Oracle 11gR2 Database (11.2.0.1) Oracle 11gR2 Grid Infrastructure (11.2.0.1)   Step 1 - Install the software Using asmlib, create 3 ASM disks (ASM_CRS, ASM_DTA and ASM_FRA) Install Grid Infrastructure for a cluster (OELCluster01 and OELCluster02 are the 2 nodes of the cluster) Use ASM_CRS to store Voting Disk and OCR. Use SCAN. Install Oracle Database Standalone binaries on both nodes. Use asmca to check/mount the disk groups on 2 nodes Use dbca to create and configure a database on the primary node Let's name it DB11G. Copy the pfile, password file to the second node. Create adump directoty on the second node.   Step 2 - Setup the resource to be protected After its creation with dbca, the database is automatically protected by the Oracle Restart technology available with Grid Infrastructure. Consequently, it restarts automatically (if possible) after a crash (ex: kill -9 smon). A database resource has been created for that in the Cluster Registry. We can observe this with the command : crsctl status resource that shows and ora.dba11g.db entry. Let's save the definition of this resource, for future use : mkdir -p /crs/11.2.0/HA_scripts chown oracle:oinstall /crs/11.2.0/HA_scripts crsctl status resource ora.db11g.db -p > /crs/11.2.0/HA_scripts/myResource.txt Although very interesting, Oracle Restart is not cluster aware and cannot restart the database on any other node of the cluster. So, let's remove it from the OCR definitions, we don't need it ! srvctl stop database -d DB11G srvctl remove database -d DB11G Instead of it, we need to create a new resource of a more general type : cluster_resource. Here are the steps to achieve this : Create an action script :  /crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh #!/bin/bash export ORACLE_HOME=/oracle/product/11.2.0/dbhome_1 export ORACLE_SID=DB11G case $1 in 'start')   $ORACLE_HOME/bin/sqlplus /nolog <<EOF   connect / as sysdba   startup EOF   RET=0   ;; 'stop')   $ORACLE_HOME/bin/sqlplus /nolog <<EOF   connect / as sysdba   shutdown immediate EOF   RET=0   ;; 'clean')   $ORACLE_HOME/bin/sqlplus /nolog <<EOF   connect / as sysdba   shutdown abort    ##for i in `ps -ef | grep -i $ORACLE_SID | awk '{print $2}' ` ;do kill -9 $i; done EOF   RET=0   ;; 'check')    ok=`ps -ef | grep smon | grep $ORACLE_SID | wc -l`    if [ $ok = 0 ]; then      RET=1    else      RET=0    fi    ;; '*')      RET=0   ;; esac if [ $RET -eq 0 ]; then    exit 0 else    exit 1 fi   This script must provide, at least, methods to start, stop, clean and check the database. It is self-explaining and contains nothing special. Just be aware that it must be runnable (+x), it runs as Oracle user (because of the ACL property - see later) and needs to know about the environment. Also make sure it exists on every node of the cluster. Moreover, as of 11.2, the clean method is mandatory. It must provide the “last gasp clean up”, for example, a shutdown abort or a kill –9 of all the remaining processes. chmod +x /crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh scp  /crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh   oracle@OELCluster02:/crs/11.2.0/HA_scripts Create a new resource file, based on the information we got from previous  myResource.txt . Name it myNewResource.txt. myResource.txt  is shown below. As we can see, it defines an ora.database.type resource, named ora.db11g.db. A lot of properties are related to this type of resource and do not need to be used for a cluster_resource. NAME=ora.db11g.db TYPE=ora.database.type ACL=owner:oracle:rwx,pgrp:oinstall:rwx,other::r-- ACTION_FAILURE_TEMPLATE= ACTION_SCRIPT= ACTIVE_PLACEMENT=1 AGENT_FILENAME=%CRS_HOME%/bin/oraagent%CRS_EXE_SUFFIX% AUTO_START=restore CARDINALITY=1 CHECK_INTERVAL=1 CHECK_TIMEOUT=600 CLUSTER_DATABASE=false DB_UNIQUE_NAME=DB11G DEFAULT_TEMPLATE=PROPERTY(RESOURCE_CLASS=database) PROPERTY(DB_UNIQUE_NAME= CONCAT(PARSE(%NAME%, ., 2), %USR_ORA_DOMAIN%, .)) ELEMENT(INSTANCE_NAME= %GEN_USR_ORA_INST_NAME%) DEGREE=1 DESCRIPTION=Oracle Database resource ENABLED=1 FAILOVER_DELAY=0 FAILURE_INTERVAL=60 FAILURE_THRESHOLD=1 GEN_AUDIT_FILE_DEST=/oracle/admin/DB11G/adump GEN_USR_ORA_INST_NAME= GEN_USR_ORA_INST_NAME@SERVERNAME(oelcluster01)=DB11G HOSTING_MEMBERS= INSTANCE_FAILOVER=0 LOAD=1 LOGGING_LEVEL=1 MANAGEMENT_POLICY=AUTOMATIC NLS_LANG= NOT_RESTARTING_TEMPLATE= OFFLINE_CHECK_INTERVAL=0 ORACLE_HOME=/oracle/product/11.2.0/dbhome_1 PLACEMENT=restricted PROFILE_CHANGE_TEMPLATE= RESTART_ATTEMPTS=2 ROLE=PRIMARY SCRIPT_TIMEOUT=60 SERVER_POOLS=ora.DB11G SPFILE=+DTA/DB11G/spfileDB11G.ora START_DEPENDENCIES=hard(ora.DTA.dg,ora.FRA.dg) weak(type:ora.listener.type,uniform:ora.ons,uniform:ora.eons) pullup(ora.DTA.dg,ora.FRA.dg) START_TIMEOUT=600 STATE_CHANGE_TEMPLATE= STOP_DEPENDENCIES=hard(intermediate:ora.asm,shutdown:ora.DTA.dg,shutdown:ora.FRA.dg) STOP_TIMEOUT=600 UPTIME_THRESHOLD=1h USR_ORA_DB_NAME=DB11G USR_ORA_DOMAIN=haroland USR_ORA_ENV= USR_ORA_FLAGS= USR_ORA_INST_NAME=DB11G USR_ORA_OPEN_MODE=open USR_ORA_OPI=false USR_ORA_STOP_MODE=immediate VERSION=11.2.0.1.0 I removed database type related entries from myResource.txt and modified some other to produce the following myNewResource.txt. Notice the NAME property that should not have the ora. prefix Notice the TYPE property that is not ora.database.type but cluster_resource. Notice the definition of ACTION_SCRIPT. Notice the HOSTING_MEMBERS that enumerates the members of the cluster (as returned by the olsnodes command). NAME=DB11G.db TYPE=cluster_resource DESCRIPTION=Oracle Database resource ACL=owner:oracle:rwx,pgrp:oinstall:rwx,other::r-- ACTION_SCRIPT=/crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh PLACEMENT=restricted ACTIVE_PLACEMENT=0 AUTO_START=restore CARDINALITY=1 CHECK_INTERVAL=10 DEGREE=1 ENABLED=1 HOSTING_MEMBERS=oelcluster01 oelcluster02 LOGGING_LEVEL=1 RESTART_ATTEMPTS=1 START_DEPENDENCIES=hard(ora.DTA.dg,ora.FRA.dg) weak(type:ora.listener.type,uniform:ora.ons,uniform:ora.eons) pullup(ora.DTA.dg,ora.FRA.dg) START_TIMEOUT=600 STOP_DEPENDENCIES=hard(intermediate:ora.asm,shutdown:ora.DTA.dg,shutdown:ora.FRA.dg) STOP_TIMEOUT=600 UPTIME_THRESHOLD=1h Register the resource. Take care of the resource type. It needs to be a cluster_resource and not a ora.database.type resource (Oracle recommendation) .   crsctl add resource DB11G.db  -type cluster_resource -file /crs/11.2.0/HA_scripts/myNewResource.txt Step 3 - Start the resource crsctl start resource DB11G.db This command launches the ACTION_SCRIPT with a start and a check parameter on the primary node of the cluster. Step 4 - Test this We will test the setup using 2 methods. crsctl relocate resource DB11G.db This command calls the ACTION_SCRIPT  (on the two nodes)  to stop the database on the active node and start it on the other node. Once done, we can revert back to the original node, but, this time we can use a more "MS$ like" method :Turn off the server on which the database is running. After short delay, you should observe that the database is relocated on node 1. Conclusion Once the software installed and the standalone database created (which is a rather common and usual task), the steps to reach the objective are quite easy : Create an executable action script on every node of the cluster. Create a resource file. Create/Register the resource with OCR using the resource file. Start the resource. This solution is a very interesting alternative to licensable third party solutions. References Clusterware 11gR2 documentation Oracle Clusterware Resource Reference Clusterware for Unbreakable Linux Using Oracle Clusterware to Protect A Single Instance Oracle Database 11gR1 (to have an idea of complexity) Oracle Clusterware on OTN   Gilles Haro Technical Expert - Core Technology, Oracle Consulting   

    Read the article

  • CodePlex Daily Summary for Saturday, November 09, 2013

    CodePlex Daily Summary for Saturday, November 09, 2013Popular ReleasesCoolpy: CoolpyI: Coolpy???,????rom??????window phone????????????。???????????Praxis2: Especificaciones de Casos de Uso Iteracción 1: Especificaciones de Casos de Uso Iteracción 1 Responsables Anderson CU Buscar Obra CU Registrar Obra CU Registrar Alquiler Juan Victor CU Buscar Cliente CU Registrar Cliente CU Registrar EntregaMedia Companion: Media Companion MC3.586b: Tv - Multi-episodes restored to MCThere's been a plenty of bug fixes occuring lately, with IMDB changing their info, and some great feed-back by users. But Thanks to Billyad2000, Multi-episodes, are now displaying correctly in Media Companion, complete with all functionality. This was a hard effort, with more than a few dev's in the past having looked at this code to get it working. But, like a light-bulb going off, Billy's managed to massage the code, and restore this much missed function...Dynamics AX 2012 R2 Kitting: AX 2012 R2 CU7 release of Kitting: Here is the AX 2012 R2 CU7 release of kitting. Released both as a XPO and a model.PantheR's GraphX for .NET: GraphX for .NET RELEASE v1.0.1: PLEASE RATE THIS RELEASE IF YOU LIKED IT! THANKS! :) RELEASE 1.0.1 + Changed ExportToImage() parameters: added useZoomControlSurface param that enables zoom control parent visual space to be used for export instead whole GraphArea panel. Using this technique it is possible to export graphs with negative vertices coordinates. + Added common interface IZoomControl for all included Zoom controls + Added new method GraphArea.GenerateGraph() that accepts only optional parameters and will use in...ConEmu - Windows console with tabs: ConEmu 131107 [Alpha]: ConEmu - developer build x86 and x64 versions. Written in C++, no additional packages required. Run "ConEmu.exe" or "ConEmu64.exe". Some useful information you may found: http://superuser.com/questions/tagged/conemu http://code.google.com/p/conemu-maximus5/wiki/ConEmuFAQ http://code.google.com/p/conemu-maximus5/wiki/TableOfContents If you want to use ConEmu in portable mode, just create empty "ConEmu.xml" file near to "ConEmu.exe"Team Foundation Server Upgrade Guide: v3 - TFS 2013 Upgrade Guide: Welcome to the Team Foundation Server Upgrade Guide Quality-Bar Details Documentation has been reviewed by Visual Studio ALM Rangers Documentation has not been through an independent technical review Known issues NoneUpgrading SharePoint section is not included yet. Independent technical review is pending.VidCoder: 1.5.12 Beta: Added an option to preserve Created and Last Modified times when converting files. In Options -> Advanced. Added an option to mark an automatically selected subtitle track as "Default". Updated HandBrake core to SVN 5878. Fixed auto passthrough not applying just after switching to it. Fixed bug where preset/profile/tune could disappear when reverting a preset.Toolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2013.9.25): XrmToolbox improvement Correct changing connection from the status dropdown Tools improvement Updated tool Audit Center (v1.2013.9.10) -> Publish entities Iconator (v1.2013.9.27) -> Optimized asynchronous loading of images and entities MetadataDocumentGenerator (v1.2013.11.6) -> Correct system entities reading with incorrect attribute type Script Manager (v1.2013.9.27) -> Retrieve only custom events SiteMapEditor (v1.2013.11.7) -> Reset of CRM 2013 SiteMap ViewLayoutReplicator (v1.201...Microsoft SQL Server Product Samples: Database: SQL Server 2014 CTP2 In-Memory OLTP Sample, based: This sample showcases the new In-Memory OLTP feature, which is part of SQL Server 2014 CTP2. It shows the new memory-optimized tables and natively-compiled stored procedures, and can be used to show the performance benefit of in-memory OLTP. Installation instructions for the sample are included in the file ‘awinmemsample.doc’, which is part of the download. You can ask a question about this sample at the SQL Server Samples Forum Composite C1 CMS - Open Source on .NET: Composite C1 4.1: Composite C1 4.1 (4.1.5058.34326) Write a review for this release - help us improve, recommend us. Getting started If you are new to Composite C1 and want to install it: http://docs.composite.net/Getting-started What's new in Composite C1 4.1 The following are highlights of major changes since Composite C1 4.0: General user features: Drag-and-drop images and files like PDF and Word directly from own your desktop and folders into page content Allow you to install Composite Form Builder ...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.9.0: Implemented Recent Scripts list Added checking for plugin updates from AboutBox Multiple formatting improvements/fixes Implemented selection of the CLR version when preparing distribution package Added project panel button for showing plugin shortcuts list Added 'What's New?' panel Fixed auto-formatting scrolling artifact Implemented navigation to "logical" file (vs. auto-generated) file from output panel To avoid the DLLs getting locked by OS use MSI file for the installation.Home Access Plus+: v9.7: Updated: JSON.net Fixed: Issue with the Windows 8 App Added: Windows 8.1 App Added: Win: Self Signed HAP+ Install Support Added: Win: Delete File Support Added: Timeout for the Logon Tracker Removed: Error Dialogs on the User Card Fixed: Green line showing over the booking form Note: a web.config file update is requiredWPF Extended DataGrid: WPF Extended DataGrid 2.0.0.10 binaries: Now row summaries are updated whenever autofilter value sis modified.xUnit.net - Unit testing framework for C# and .NET (a successor to NUnit): xUnit.net Visual Studio Runner: A placeholder for downloading Visual Studio runner VSIX files, in case the Gallery is down (or you want to downgrade to older versions).VeraCrypt: VeraCrypt version 1.0c: Changes between 1.0b and 1.0c (11 November 2013) : Set correctly the minimum required version in volumes header (this value must always follow the program version after any major changes). This also solves also the hidden volume issueCaptcha MVC: Captcha MVC 2.5: v 2.5: Added support for MVC 5. The DefaultCaptchaManager is no longer throws an error if the captcha values was entered incorrectly. Minor changes. v 2.4.1: Fixed issues with deleting incorrect values of the captcha token in the SessionStorageProvider. This could lead to a situation when the captcha was not working with the SessionStorageProvider. Minor changes. v 2.4: Changed the IIntelligencePolicy interface, added ICaptchaManager as parameter for all methods. Improved font size ...Duplica: duplica 0.2.498: this is first stable releaseDNN Blog: 06.00.01: 06.00.01 ReleaseThis is the first bugfix release of the new v6 blog module. These are the changes: Added some robustness in v5-v6 scripts to cater for some rare upgrade scenarios Changed the name of the module definition to avoid clash with Evoq Social Addition of sitemap providerVG-Ripper & PG-Ripper: VG-Ripper 2.9.50: changes NEW: Added Support for "ImageHostHQ.com" links NEW: Added Support for "ImgMoney.net" links NEW: Added Support for "ImgSavy.com" links NEW: Added Support for "PixTreat.com" links Bug fixesNew ProjectsAppBootloader: ???CS????????????? Let your C\S program more flexible for automatic updatesArduino Visual Studio: Purpose of this project is to demonstrate using Visual Studio 2012 with Atmel chip on a Arduino UNO board.ASP.NET Identity: ASP.NET Identity is the new membership system for building ASP.NET web applications. ASP.NET Identity allows you to add login features to your application and mAsset Maintenance Management Console: A.M.M.C is an attempt at creating an extremely versatile interface tool to maintain assets.AX 2012 R2 SYNC: SYNC for AX 2012 introduces a centralized company concept which holds and manages the enterprise-wide master data for synchronizing across multiple companies.BYOND - Build Your OwN Device (audio synths, effects, DSP, sequencer, VST): Byond is an environment for audio and midi programming in C#. It's available as VST plugin or standalone application.CoveSmushbox: A simple .NET library and a Windows CLI to the SMUSH Box.FORMULA 2.0: Formula specifications are highly declarative logic programs that can express rich synthesis and verification problems.Grostbite Engine: Free 3D game engine.hMailServer from RoundCube: A RoundCube plugin for interacting with hMailServer 5.4B1950. The plugin allows to configure vacation configuration of hMailServer from RoundCube.KDG's IP Reporter: Baisc reporter for local and private IP addresses.LADNS Service Watcher: LADNS Service WatcherLampguiden: LampguidenMedia Recommender Service: We are 6 software engineer students developing a media recommendation service as part of our 3rd semester project. photograp: SPA Photo gallery. Work in progress... Power Buddy: The Windows power tray icon only displays two power plans. If this has bothered you since 2009, Power Buddy is for you. Power Buddy displays all of them.Programming Demos: This project contains demonstration code that may be helpful to people learning VisualBasic .NET.Prototype : Traveling Alone Website: A website aiming to become an online community for solo travelers.ShowDBPool: ShowDBPoolThali: Thali is about making it falling off a log easy for users to run their own services on their own devices by building a peer to peer web.TiendaWebCursoAccentureNet: aWpf PdfReader: This is a pdf reader, development based WPF and MuPDF,You can use the keyboard to operate it.This is pdf reader can save the user's open records.

    Read the article

  • Adopting Technologies for the Sake of Technologies

    - by shiju
    Unlike other engineering industries, the software engineering industry is really lacking maturity. The lack of maturity can see in different aspects of entire software development life cycle. I think other engineering industries are well organised and structured with common, proven engineering practices. The software engineering industry is greatly a diverse industry with different operating systems, and variety of development platforms, programming languages, frameworks and tools. Now these days, people are going behind the hypes and intellectual thoughts without understanding their core business problems and adopting technologies and practices for the sake of technologies and practices and simply becoming a “poster child” of technologies and practices. Understanding the core business problem and providing best, solid solution with a platform neutral approach, will give you more business values and ROI, instead of blindly adopting technologies and tailor-made your applications for the sake of technologies and practices. People have been simply migrating their solutions in favour of new technologies and different versions of frameworks without any business need. The “Pepsi Challenge” in the Software Development  Pepsi Challenge marketing campaign of the 1980s was a popular and very interesting marketing promotion in which people taste one cup of Pepsi and another cup with Coca Cola. In the taste test, more than 50% of people were preferred Pepsi  over Coca Cola. The success story behind the Pepsi was more sweetness contains in the Pepsi cola. They have simply added more sugar and more people preferred more sweet flavour. You can’t simply identify the better one after sipping one cup of cola based on the sweetness which contains. These things have been happening in the software industry for choosing development frameworks and technologies. People have been simply choosing frameworks based on the initial sugary feeling without understanding its core strengths and weakness. The sugary framework might be more harmful when you develop real-world systems. There is not any silver bullet for solving all kind of problems and frameworks and tools do have strengths and weakness. So it would be better to understand their strength and weakness. And please keep in mind that you have to develop real apps to understand the real capabilities and weakness of a framework. Evaluating a technology based on few blog posts will harm your projects and these bloggers might be lacking real-world experience with the framework. The Problem with Align a Development Practice with Tools Recently I have observed a discussion in a group where one guy asked suggestions for practicing Continuous Delivery (CD) as part of the agile based application engineering. Then the discussion quickly went to using and choosing a Continuous Integration (CI) tool and different people suggested different Continuous Integration (CI) tools for simply practicing Continuous Delivery. If you have worked with core agile engineering practices, you could clearly know that the real essence of agile is neither choosing a tool nor choosing a process. By simply choosing CI tool from a particular vendor will not ensure that you are delivering an evolving software based on customer feedback. You have to understand the real essence of a engineering practice and choose a right tool for practicing it instead of simply focus on a particular tool for a practicing an development practice. If you want to adopt a practice, you need a solid understanding on it with its real essence where tools are just helping us for better automation. Adopting New Technologies for the Sake of Technologies The another problem is that developers have been a tendency to adopt new technologies and simply migrating their existing apps to new technologies. It is okay if your existing system is having problem  with a technology stack or or maintainability challenge with existing solution, and moving to new technology for solving the current problems. We have been adopting new technologies for solving new challenges like solving the scalability challenges when the application or user bases is growing unpredictably. Please keep in mind that all new technologies will become old after working with it for few years. The below Facebook status update of Janakiraman, expresses the attitude of a typical customer. For an example, Node.js is becoming a hottest buzzword in the software industry and many developers are trying to adopt Node.js for their apps. The important thing is that Node.js is a minimalist framework that does some great things for some problems, but it’s not a silver bullet. I have been also working with Node.js which is good for some problems, but really bad for choosing it for all kind of problems. By adopting new technologies for new projects is good if we could get real business values from it because newer framework would solve some existing well known problems and provide better solutions where it can incorporate good solutions for the latest challenges . But adopting a new technology for the sake of new technology is really bad idea. Another example is JavaScript is getting lot of attention so that lot of developers are developing heavy JavaScript centric web apps. First, they will adopt a client-side JavaScript MV* framework from AngularJS, Ember, Backbone etc, and develop a Single Page App(SPA) where they are repeating the mistakes we did in the past with server-side. The mistakes we did in the server-side is transforming to client-side. The problem is that people are just adopting new technologies, but not improving their solutions. I predict that many Single Page App will suck in the future. We need a hybrid approach where we should be able to leverage both server-side and client-side for developing next-generation web apps. The another problem is that if you like a particular framework, use it for all kind of apps. In the past, I know some Silverlight passionate guys were tried to use that framework for all kind of apps including larger line of business apps. And these days developers are migrating their existing Silverlight apps in favour of HTML5 buzzword. So the real question is, what is the business values we are getting from these apps when we are developing it for the sake of a particular technology instead of business need. The another problem is that our solutions consultants are trying to provide unnecessary solutions for the sake of a particular technology or for a hype. For an example, Big Data solutions are great for solving the problem of three Vs : volume, velocity and variety. But trying to put this for every application will make problems. Let’s say, there is a small web site running with limited budget and saying that we need a recommendation engine for the web site with a Hadoop based solution with a 16 node cluster, would be really horrible. If we really need a Hadoop based solution, got for it, but trying to put this for all application would be a big disaster. It would be great if could understand the core business problems first, and later choose a right framework for providing solutions for the actual business problem, instead of trying to provide so many solutions. The Problem with Tied Up to a Platform Vendor Some organizations and teams are tied up with a particular platform vendor where they don’t want to use any product other than their preferred or existing platform vendor. They will accept any product provided by the vendor regardless of its capability. This will lets you some benefits regards with integration and collaboration of different products provided by the same vendor, but it will loose your opportunity to provide better solution for your business problems. For a real world sample scenario, lot of companies have been using SAP for their ERP solutions. When they are thinking about mobility or thinking about developing hybrid mobile apps, they can easily find out a framework from SAP. SAP provides a framework for HTML 5 based UI development named SAPUI5. If you are simply adopting that framework only based for the preference of existing platform vendor, you might be loose different opportunities for providing better solution. Initially you might enjoy the sugary feeling provided by the platform vendor, but you have to think about developing apps which should be capable for solving future challenges. I am not saying that any framework is not good and I believe that all frameworks are good over another one for solving at least one problem. My point is that we should not tied up with any specific platform vendor unless your organization is having resource availability problems. Being Polyglot for Providing Right Solutions The modern software engineering industry is greatly diverse with different tools and platforms. Lot of open source frameworks and new programming languages have been releasing to the developer community, where choosing the right platform without any biased opinion, is really a difficult task. But it would really great if we could develop an attitude with platform neutral mindset and being a polyglot developer for providing better solutions based on the actual business problems. IMHO, we should learn a new programming language and a new framework every year. This will improve the quality of our developer capabilities and also improve the quality of our primary programming language skills. Being polyglot for individual developers and organizational teams will give you greater opportunity to your developer experience and also for your applications. Organizations can analyse their business problem without tied with any technology and later they can provide solutions by choosing different platform and tools. Summary    In this blog post, what I was trying to say that we should not tied up or biased with any development platform, technology, vendor or programming language and we should not adopt technologies and practices for the sake of technologies. If we are adopting a technology or a practice for the sake of it, we are simply becoming a “poster child” of the technology and practice. We should not become a poster child of other people’s intellectual thoughts and theories, instead of it we should become solutions developers and solutions consultants where we should be able to provide better solutions for the business problems. Being a polyglot developer is a good idea for improving your developer skills which lets you provide better solutions for the business problems. The most important thing is that we should become platform neutral developers where our passion should be for providing brilliant solutions. It would be great if we could provide minimalist, pragmatic business solutions. You can follow me on Twitter @shijucv

    Read the article

  • Taking web sites offline for demonstration

    While working in software development in general, and in web development for a couple of customers it is quite common that it is necessary to provide a test bed where the client is able to get an image, or better said, a feeling for the visions and ideas you are talking about. Usually here at IOS Indian Ocean Software Ltd. we set up a demo web site on one of our staging servers, and provide credentials to the customer to access and review our progress and work ad hoc. This gives us the highest flexibility on both sides, as the test bed is simply online and available 24/7. We can update the structure, the UI and data at any time, and the client is able to view it as it suits best for her/him. Limited or lack of online connectivity But what is going to happen when your client is not capable to be online - no matter for what reasons; here are some more obvious ones: No internet connection (permanently or temporarily) Expensive connection, ie. mobile data package, stay at a hotel, etc. Presentation devices at an exhibition, ie. using tablets or iPads Being abroad for a certain time, and only occasionally online No network coverage, especially on mobile Bad infrastructure, like ie. in Third World countries Providing a catalogue on CD or USB pen drive Anyway, it doesn't matter really. We should be able to provide a solution for the circumstances of our customers. Presentation during an exhibition Recently, we had the following request from a customer: Is it possible to let us have a desktop version of ResortWork.co.uk that we can use for demo purposes at the forthcoming Ski Shows? It would allow us to let stand visitors browse the sites on an iPad to view jobs and training directory course listings. Yes, sure we can do that. Eventually, you might think why don't they simply use 3G enabled iPads for that purpose? As stated above, there might be several reasons for that - low coverage, expensive data packages, etc. Anyway, it is not a question on how to circumvent the request but to deliver a solution to that. Possible solutions... or not? We already did offline websites earlier, and even established complete mirrors of one or two web sites on our systems. There are actually several possibilities to handle this kind of request, and it mainly depends on the system or device where the offline site should be available on. Here, it is clearly expressed that we have to address this on an Apple iPad, well actually, I think that they'd like to use multiple devices during their exhibitions. Following is an overview of possible solutions depending on the technology or device in use, and how it can be done: Replication of source files and database The above mentioned web site is running on ASP.NET, IIS and SQL Server. In case that a laptop or slate runs a Windows OS, the easiest way would be to take a snapshot of the source files and database, and transfer them as local installation to those Windows machines. This approach would be fully operational on the local machine. Saving pages for offline usage This is actually a quite tedious job but still practicable for small web sites Tool based approach to 'harvest' the web site There quite some tools in the wild that could handle this job, namely wget, httrack, web copier, etc. Screenshots bundled as PDF document Not really... ;-) Creating screencast or video Simply navigate through your website and record your desktop session. Actually, we are using this kind of approach to track down difficult problems in order to see and understand exactly what the user was doing to cause an error. Of course, this list isn't complete and I'd love to get more of your ideas in the comments section below the article. Preparations for offline browsing The original website is dynamically and data-driven by ASP.NET, and looks like this: As we have to put the result onto iPads we are going to choose the tool-based approach to 'download' the whole web site for offline usage. Again, depending on the complexity of your web site you might have to check which of the applications produces the best results for you. My usual choice is to use wget but in this case, we run into problems related to the rewriting of hyperlinks. As a consequence of that we opted for using HTTrack. HTTrack comes in different flavours, like console application but also as either GUI (WinHTTrack on Windows) or Web client (WebHTTrack on Linux/Unix/BSD). Here's a brief description taken from the original website about HTTrack: HTTrack is a free (GPL, libre/free software) and easy-to-use offline browser utility. It allows you to download a World Wide Web site from the Internet to a local directory, building recursively all directories, getting HTML, images, and other files from the server to your computer. HTTrack arranges the original site's relative link-structure. Simply open a page of the "mirrored" website in your browser, and you can browse the site from link to link, as if you were viewing it online. And there is an extensive documentation for all options and switches online. General recommendation is to go through the HTTrack Users Guide By Fred Cohen. It covers all the initial steps you need to get up and running. Be aware that it will take quite some time to get all the necessary resources down to your machine. Actually, for our customer we run the tool directly on their web server to avoid unnecessary traffic and bandwidth. After a couple of runs and some additional fine-tuning - explicit inclusion or exclusion of various external linked web sites - we finally had a more or less complete offline version available. A very handsome feature of HTTrack is the error/warning log after completing the download. It contains some detailed information about errors that appeared on the pages and the links within the pages that have been processed. Error: "Bad Request" (400) at link www.resortwork.co.uk/job-details_Ski_hire:tech_or_mgr_or_driver_37854.aspx (from www.resortwork.co.uk/Jobs_A_to_Z.aspx)Error: "Not Found" (404) at link www.247recruit.net/images/applynow.png (from www.247recruit.net/css/global.css)Error: "Not Found" (404) at link www.247recruit.net/activate.html (from www.247recruit.net/247recruit_tefl_jobs_network.html) In our situation, we took the records of HTTP 400/404 errors and passed them to the web development department. Improvements are to be expected soon. ;-) Quality assurance on the full-featured desktop Unfortunately, the generated output of HTTrack was still incomplete but luckily there were only images missing. Being directly on the web server we simply copied the missing images from the original source folder into our offline version. After that, we created an archive and transferred the file securely to our local workspace for further review and checks. From that point on, it wasn't necessary to get any more files from the original web server, and we could focus ourselves completely on the process of browsing and navigating through the offline version to isolate visual differences and functional problems. As said, the original web site runs on ASP.NET Web Forms and uses Postback calls for interaction like search, pagination and partly for navigation. This is the main field of improving the offline experience. Of course, same as for standard web development it is advised to test with various browsers, and strangely we discovered that the offline version looked pretty good on Firefox, Chrome and Safari, but not in Internet Explorer. A quick look at the HTML source shed some light on this, and there are conditional CSS inclusions based on the user agent. HTTrack is not acting as Internet Explorer and so we didn't have the necessary overrides for this browser. Not problematic after all in our case, but you might have to pay attention to this and get the IE-specific files explicitly. And while having a view at the source code, we also found out that HTTrack actually modifies the generated HTML output. In several occasions we discovered that <div> elements were converted into <table> constructs for no obvious reason; even nested structures. Search 'e'nd destroy - sed (or Notepad++) to the rescue During our intensive root cause analysis for a couple of HTML/CSS problems that needed some extra attention it is very helpful to be familiar with any editor that allows search and replace over multiple files like, ie. sed - stream editor for filtering and transforming text on Linux or my personal favourite Notepad++ on Windows. This allowed us to quickly fix a lot of anchors with onclick attributes and Javascript code that was addressed to ASP.NET files instead of their generated HTML counterparts, like so: grep -lr -e '.aspx' * | xargs sed -e 's/.aspx/.html?/g' The additional question mark after the HTML extension helps to separate the query string from the actual target and solved all our missing hyperlinks very fast. The same can be done in Notepad++ on Windows, too. Just use the 'Replace in files' feature and you are settled. Especially, in combination with Regular Expressions (regex). Landscape of browsers Okay, after several runs of HTML/CSS code analysis, searching and replacing some strings in a pool of more than 4.000 files, we finally had a very good match of an offline browsing experience in Firefox and Chrome on Linux. Next, we transferred that modified set of files to a Windows 8 machine for review on Firefox, Chrome and Internet Explorer 7 to 10, and a Mac mini running Mac OS X 10.7 to check the output on Safari and again on Chrome. Besides IE, for reasons already mentioned above, the results were identical. And last but not least it was about to check web site on tablets. Please continue to read on the following articles: Taking web sites offline for demonstration on Galaxy Tablet Taking web sites offline for demonstration on iPad

    Read the article

< Previous Page | 59 60 61 62 63 64 65  | Next Page >