Search Results

Search found 6033 results on 242 pages for 'partition magic'.

Page 63/242 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >

  • Shrinking windows and recovery partitions on the samsung new series 9

    - by bobbaluba
    I just bought a samsung NP900X3C, and as I was going to install linux, I noticed the windows partitions and recovery partitions occupied a major portion of the disk. The disk is a 128 GB SSD, and I want to keep the windows partition in order to play some games once in a while, but the windows disk is already 45GB full (with no installed programs) and the recovery partition is 20GB. That leaves under 60 GB for linux, which is not optimal, since that is what I'm going to be using most of the time, and there would be no room for games on the windows partition. There are also two small partitions that I don't know what are doing, one 100mb at the start of the disk that I'm guessing is some kind of boot partition, and one 5GB, that is described as an OS/2 hidden C: drive What I'm wondering is: can i delete the recovery partition? What about the mystical 5gb partition? Here is what fdisk reports: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 128.0 GB, 128035676160 bytes 255 heads, 63 sectors/track, 15566 cylinders, total 250069680 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x83953ffc Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 198273023 99033088 7 HPFS/NTFS/exFAT /dev/sda3 198273024 207276031 4501504 84 OS/2 hidden C: drive /dev/sda4 207276032 250068991 21396480 27 Hidden NTFS WinRE

    Read the article

  • Dual booting Windows 7 & 8.1, using the Windows 8 Startup Options Menu, when Windows 8.1 is already installed and you want to add Windows 7

    - by Josh
    There are many excellent guides out there that explain how to dual-boot Windows 7 & 8. However, they are written for people starting with a Windows 7 installation and add a Windows 8 installation to separate partition. From what I'm reading, following this procedure will result in Windows 8 installing and configuring the Startup Options Menu with an option to boot Windows 7 & 8. However, in my situation I have a Windows 8.1 machine that I want to install Windows 7 on, and enable dual-boot, where I can use the Startup Options Menu to select the OS to boot. I haven't been able to determine how to do this. From everything I've been able to find, it looks like if I install Windows 7, it is going to take over the boot loader process, and I won't have access to the Windows 8 "Startup Options Menu." This answer suggests I boot to VHD, but notes a drawback: You can't do this if the C:\drive is encrypted using ANY encryption shceme. Be that BitLocker or 3rd party. The location of the .VHD file you are booting to must reside on an unencrypted volume. Well, that's a bummer, because that's exactly what I wanted to do--I wanted my Windows 7 partition to be encrypted, and my Windows 8 partition to also be encrypted. The idea being that when OS was booted, it was completely locked out from accessing data on the other OS's partition. At this point, I'm thinking my only option is to install Windows 7, and then re-install Windows 8, which will give me the dual-boot option... am I right? Or is there a way to make this work. I'm thinking that I would need to figure out a process like this: Configure the Windows Startup Options Menu with a "blank" entry for Windows 7, pointing to an empty partition Insert the Windows 7 installation media, install Windows 7, and somehow restrict it to that partition (i.e., prevent it from "taking over" from the Startup Options Menu" Is this possible, and if so, how can I accomplish this? My concern is that if I simply install Windows 7 to a separate partition, Windows 7 will take over the entire boot process and I won't be able to get to my Windows 8 installation any more.

    Read the article

  • Preinstalled Windows 8 and Linux UEFI dual boot on a laptop

    - by itchy355
    I am trying to set up Windows 8 and Arch Linux on a new Sony Vaio E14 with preinstalled windows 8. So far: installed W8 to my new SSD (switched for the original HDD) using Recovery Media shrunk the W8 partition, deleted recovery partition, disabled swap confirmed W8 booting just fine On to Arch: disabled Secure Boot in bios confirmed W8 booting just fine Booted Arch off the CD and installed everything to 4th and 5th partition set up rEFInd for EFIstub kernel bootloader After that it got worse. I was unable to boot anything else than Windows 8 (although I was glad that they at least kept working just fine). Tried: creating EFI\refind\ and putting the .efi there (as per Arch manual overwriting EFI\boot\bootx64.efi overwriting EFI\Microsoft\Boot\bootmgr.efi overwriting EFI\Microsoft\Boot\bootmgfw.efi --- YAY rEFInd shown up! So far, so good. I've kept the whole W8 Boot\ directory in EFI\windows8 and set up a boot menuentry for it; and it booted just fine. But, upon restart, everything was wrong -- 'Operating system not found' instead of any bootloader (refind or w8). Booted back into Arch using the live CD to find out that the EFI partition had erroneous FAT table. fsck.vfat fixed it, and I've found that EFI\Microsoft\Boot was back to it's original state (all refind files deleted and replaced with W8 bootloaders). I've overwritten them again and got back to rEFInd showing up correctly and Arch being perfectly bootable. After that I've tried only renaming EFI\Microsoft\Boot\bootmgfw.efi to bootmgfw.001.efi (then copying refind's .efi to bootmgfw.efi and keeping EVERY OTHER file as it was), but with exactly the same result. Tried marking the GPT EFI partition as read-only, same result. Now I'm kinda out of luck. Arch boots fine, so does W8 but it destroys the EFI partition in the process. Thanks for any ideas, Googling brought me this far and I can't find any better. PS -- windows 8 MAYBE destroys the partition upon shutdown -- when I order a shutdown in W8, it takes unusually long (about half a minute instead of ~5 seconds). So in theory I could solve this by hard-resetting the laptop instead of a normal shutdown, but that's just not nice.

    Read the article

  • Windows 7 The boot selection failed because a required device is inaccessible 0xc000000f

    - by piratejackus
    I have a problem with my Windows 7, hardware : Acer 3820TG Operating Systems : Windows 7 and Ubuntu 10.04 dual Case: When I try to boot my windows 7 I see an error: "Window failed to start. A recent hardware or software change might be the cause. To fix the problem: 1.Insert.... 2. .... ... status : 0xc000000f info : The boot selection failed because a required device is inaccessible .... " I can't exactly remember what were my last actions on Windows. I already searched this error and applied the proposed solutions, I created a repair USB (because I don't have a CD-ROM nor a Windows 7 CD) such as; -repair operating system :it says it cannot repair it -checking disk (chkdsk D: /f /r) : it checks the disk without a problem or error and it takes pretty long (more than a hour). But when I restart, still the same error. -I didn't create a restore point so I pass this option -I don't have a system image -I tried to run windows recovery (I have a recovery partition) but there are just two options: 1- Format the operating system but retain user data (copies the files under users to c\backup folder, but when I searched deeper I found that there are some people who already tried this option and couldn't find their user files under backup directory). Plus, I have unfortunately just one partition D (it is a fault I know) because I use always Ubuntu. So this is not applicable in my situation 2- Format entire system (Windows). I keep my valuable data in windows but not in user folder. I was reaching them from Windows. -I tried to repair windows boot by: bootrec /fixMBR bootrec /fixBoot bootrec /rebuildBCD I lost all grub menu, and reinstalled it. - ubuntuforums.org/showthread.php?t=1014708&page=29 nothing changed, same error. I created a thread in microsoft forums - http://social.answers.microsoft.com/Forums/en-US/w7install/thread/69517faf-850a-45fd- 8195-6d4ed831f805 but I couldn't find a solution. Before I run chkdsk from usb repair disk I couldn't able to mount Windows (NTFS) partition from Ubuntu, I was getting "couldn't mount file system, error code 2". I tried to fix ntfs partition from ubuntu and got "segmentation fault". I also created a thread on ubuntuforums for this mount problem: - http://ubuntuforums.org/showthread.php?t=1606427 So, after chkdsk, I could enable to mount windows partition but all I see in this partition is chkdsk logs, no any other data. Now, I don't think I lost my data because I don't get any filesystem errors, just the boot section, but this log files under windows partition makes me afraid. I see that Microsoft developers don't have a solution yet for this error. If you need any information to get more idea I can give, maybe I miss some points or it could be complicated. Thanks in advance.

    Read the article

  • WIndows 7 cannot boot - bootrec reports FS not found or corrupt

    - by purecharger
    For 3 days now I've been unable to boot into my Windows 7 partition, and all my research has been to no avail. I'm hoping someone here has more ideas on how to fix this. When I boot up now, I get the black screen with BCD error that says theres no valid file system or it may be corrupt (pardon my lack of detail, no copy/paste is available then). When I boot with the Windows 7 disc and go into repair tools, no operating system is found, and attempting to automatically repair the problem fails with Unknown Operating System (Unknown Disk) or something similar. When I drop into the command prompt, I am able to see and navigate my C:\ drive without issue. I attempt to use bootrec: C:\> bootrec /ScanOS Finds C:\Windows as a system partition. C:\> bootrec /RebuildBCD Fails with volume does not contain a recognized file system. please make sure that all required file system drivers are loaded and that the volume is not corrupted. So then I attempt to fix the bootsector: C:\> bootsect /nt60 C: /force Which completes successfully (sorry, no output..) Upon rebooting, I have the same problem. I've also tried all of the above after making my Windows partition active: C:\> diskpart DISKPART> select disk 1 DISKPART> select partition 1 DISKPART> active DISKPART> exit Then bootrec as above, both with and without a reboot after the DISKPART commands. Then I've also tried rebuilding the BCD store by hand: set systemdrive=C: set tempbcd=C:\boot\bcd.temp set tempfile=C:\boot\temp.txt bcdedit -createstore %tempbcd% bcdedit.exe -store %tempbcd% -create {bootmgr} -d "Windows Boot Manager" bcdedit -store %tempbcd% -create -d "Windows Vista" -application osloader>%tempfile% set /p winvistaguid= <%tempfile% set winvistaguid=%winvistaguid:~10,38% bcdedit -store %tempbcd% -set %winvistaguid% osdevice partition=%systemdrive% bcdedit -store %tempbcd% -set %winvistaguid% device partition=%systemdrive% bcdedit -store %tempbcd% -set %winvistaguid% path \Windows\system32\winload.exe bcdedit -store %tempbcd% -set %winvistaguid% systemroot \Windows bcdedit -import %tempbcd% However on the import, I get my familiar friendly message: volume does not contain a recognized file system. please make sure that all required file system drivers are loaded and that the volume is not corrupted I'm at my wits end here, and I cannot understand why Windows refuses to see this as a valid install. When I list the disk/partition in DISKPART, it shows up as NTFS and "Healthy", and I can navigate the directory structure from DOS with no problems. I really, really do not want to reformat and reinstall. I know this problem can be solved!

    Read the article

  • WIndows 7 cannot boot - bootrec reports FS not found or corrupt

    - by purecharger
    For 3 days now I've been unable to boot into my Windows 7 partition, and all my research has been to no avail. I'm hoping someone here has more ideas on how to fix this. When I boot up now, I get the black screen with BCD error that says theres no valid file system or it may be corrupt (pardon my lack of detail, no copy/paste is available then). When I boot with the Windows 7 disc and go into repair tools, no operating system is found, and attempting to automatically repair the problem fails with Unknown Operating System (Unknown Disk) or something similar. When I drop into the command prompt, I am able to see and navigate my C:\ drive without issue. I attempt to use bootrec: C:\> bootrec /ScanOS Finds C:\Windows as a system partition. C:\> bootrec /RebuildBCD Fails with volume does not contain a recognized file system. please make sure that all required file system drivers are loaded and that the volume is not corrupted. So then I attempt to fix the bootsector: C:\> bootsect /nt60 C: /force Which completes successfully (sorry, no output..) Upon rebooting, I have the same problem. I've also tried all of the above after making my Windows partition active: C:\> diskpart DISKPART> select disk 1 DISKPART> select partition 1 DISKPART> active DISKPART> exit Then bootrec as above, both with and without a reboot after the DISKPART commands. Then I've also tried rebuilding the BCD store by hand: set systemdrive=C: set tempbcd=C:\boot\bcd.temp set tempfile=C:\boot\temp.txt bcdedit -createstore %tempbcd% bcdedit.exe -store %tempbcd% -create {bootmgr} -d "Windows Boot Manager" bcdedit -store %tempbcd% -create -d "Windows Vista" -application osloader>%tempfile% set /p winvistaguid= <%tempfile% set winvistaguid=%winvistaguid:~10,38% bcdedit -store %tempbcd% -set %winvistaguid% osdevice partition=%systemdrive% bcdedit -store %tempbcd% -set %winvistaguid% device partition=%systemdrive% bcdedit -store %tempbcd% -set %winvistaguid% path \Windows\system32\winload.exe bcdedit -store %tempbcd% -set %winvistaguid% systemroot \Windows bcdedit -import %tempbcd% However on the import, I get my familiar friendly message: volume does not contain a recognized file system. please make sure that all required file system drivers are loaded and that the volume is not corrupted I'm at my wits end here, and I cannot understand why Windows refuses to see this as a valid install. When I list the disk/partition in DISKPART, it shows up as NTFS and "Healthy", and I can navigate the directory structure from DOS with no problems. I really, really do not want to reformat and reinstall. I know this problem can be solved!

    Read the article

  • Duplicate DNS Zones (Error 4515 in Event Log )

    - by Campo
    I am getting these two error in the DNS Event log (errors at end of question). I have confirmed I do have duplicate zones. I am wondering which ones to delete. The DomainDNSZone contains all of our DNS records but it does not have the _msdcs zone.... that is in the ForestDNSZone with the duplicates that are not in use. here is a picture of that 3 Questions. I understand the advantages of having DNS in the ForestDNSZone. so... Why is DNS using the DomainDNSZone and is that acceptable considering _msdcs... is in the ForestDNSZone? If so, should I just delete the DC=1.168.192.in-addr.arpa and DC=supernova.local from the ForestDNSZone? Or should I try to get those to be the ones in use? What are those steps? I understand how to delete. That is simple but if i must move zones some info would be appreaciated there. Just to confirm. from my understanding. I can delete the two duplicates in the ForestDNSZone and leave the _msdcs.supernova.local as thats required there. This will resolve the erros I see. Just fyi when I look in those folders from the ForestDNSZone they have just 2 and 1 entries respectively. So obviously not in use compared to the others. I am pretty sure I understand the steps to complete this. But if you would like to provide that info, bonus points! Event Type: Warning Event Source: DNS Event Category: None Event ID: 4515 Date: 1/4/2011 Time: 2:14:18 PM User: N/A Computer: STANLEY Description: The zone 1.168.192.in-addr.arpa was previously loaded from the directory partition DomainDnsZones.supernova.local but another copy of the zone has been found in directory partition ForestDnsZones.supernova.local. The DNS Server will ignore this new copy of the zone. Please resolve this conflict as soon as possible. If an administrator has moved this zone from one directory partition to another this may be a harmless transient condition. In this case, no action is necessary. The deletion of the original copy of the zone should soon replicate to this server. If there are two copies of this zone in two different directory partitions but this is not a transient caused by a zone move operation then one of these copies should be deleted as soon as possible to resolve this conflict. To change the replication scope of an application directory partition containing DNS zones and for more details on storing DNS zones in the application directory partitions, please see Help and Support. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 89 25 00 00 %.. AND Event Type: Warning Event Source: DNS Event Category: None Event ID: 4515 Date: 1/4/2011 Time: 2:14:18 PM User: N/A Computer: STANLEY Description: The zone supernova.local was previously loaded from the directory partition DomainDnsZones.supernova.local but another copy of the zone has been found in directory partition ForestDnsZones.supernova.local. The DNS Server will ignore this new copy of the zone. Please resolve this conflict as soon as possible. If an administrator has moved this zone from one directory partition to another this may be a harmless transient condition. In this case, no action is necessary. The deletion of the original copy of the zone should soon replicate to this server. If there are two copies of this zone in two different directory partitions but this is not a transient caused by a zone move operation then one of these copies should be deleted as soon as possible to resolve this conflict. To change the replication scope of an application directory partition containing DNS zones and for more details on storing DNS zones in the application directory partitions, please see Help and Support. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 89 25 00 00 %..

    Read the article

  • Making libmagic/file detect .docx files

    - by Jonatan Littke
    As seen elsewhere, docx, xlsx and pttx are ZIPs. When uploading them to my web application, file (via libmagic andpython-magic) detects them as being ZIP. I store the contents of the file as a blob in the database, but naturally I don't want to trust the user with what kind of file type this is. So I would like to trust file for and automatically generate a filename during download. I know one can modify /etc/magic but the format (magic(5)) is way too complicated for me. I found a bug report on the issue at Debian bugs but since it's from 2008 it doesn't seem to be fixed any time soon. I guess my only other alternative is to indeed trust the user (but still store the contents as a blob) and only check the file extension based on the file name. This way I can disallow some extensions and allow others. And when the user re-downloads his file, he can have it in whatever way he uploaded it. But this solution is insecure if the file is shared with others, since you can simply rename the file to allow uploading it. Any ideas? Lastly, I found a list of magic numbers for docx etc, but I'm unable to convert these into the magic(5) format.

    Read the article

  • e2fsck / resize2fs problems

    - by BlakBat
    I've got 6 drives (each 1.5T, all same model and firmware revision) that are part of a RAID5 array. The RAID5 makes a LVM volume group and a logical group. The latter contains only one ext3 partition. I've recently ran: e2fsck -f /dev/vg03/lv01 && resize2fs -M /dev/vg03/lv01 which exited without an error. Now when I try to mount /dev/vg03/lv01 I get: EXT3-fs error (device dm-0): ext3_check_descriptors: Block bitmap for group 30533 not in group (block 1000532368)! EXT3-fs: group descriptors corrupted! How do I get out of this predicament? This is all the info I can currently give you: fdisk -l /dev/sd[cdefgh] shows (correctly) that they are "Linux raid autodetect" but fdisk now shows: fdisk -l /dev/md0 Disk /dev/md0: 7501.5 GB, 7501495664640 bytes ... Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table (instead of a LVM type partition) fdisk -l /dev/vg03/lv01 Disk /dev/vg03/lv01: 7501.5 GB, 7501491732480 bytes ... Disk identifier: 0x00000000 Disk /dev/vg03/lv01 doesn't contain a valid partition table (instead of a ext3 type partition) I've tried: e2fsck -fy /dev/vg03/lv01 e2fsck 1.41.12 (17-May-2010) e2fsck: Group descriptors look bad... trying backup blocks... Block bitmap for group 30533 is not in group. (block 1000532368) Relocate? yes Inode bitmap for group 30533 is not in group. (block 1000532369) Relocate? yes Pass 1: Checking inodes, blocks, and sizes Relocating group 30533's block bitmap to 1000524246... Error allocating 1 contiguous block(s) in block group 30533 for inode bitmap: Could not allocate block in ext2 filesystem e2fsck: aborted Extra information I can give you: cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active (auto-read-only) raid5 sdg1[0] sdh1[5] sdf1[4] sde1[3] sdc1[2] sdd1[1] 7325679360 blocks level 5, 128k chunk, algorithm 2 [6/6] [UUUUUU] bitmap: 1/175 pages [4KB], 4096KB chunk unused devices: Lastly, all smartctl tests (short and extendend) showed no errors on any of the disks. Should I try to resize2fs to grow /dev/vg03/lv01 and redo a e2fsck ? Should I cfdisk /dev/md0 and /dev/vg03/lv01 back to their real types? Thanks in advance for all and any help. 2011-09-20 UPDATE I issued the following commands and was able to remount the partition, but by viewing the size (df) of before and after, it seems that 1Tb of data have gone missing. By checking the MD5SUMS (from an old backup) of some files with the "same" files from the remounted partition, some errors have been detected. Commands issued to remount the partition were: dumpe2fs /dev/vg03/lv01 Block count: 1000491435<br /> Block size: 4096<br /> tune2fs -O ^has_journal /dev/vg03/lv01 resize2fs -p /dev/vg03/lv01 dumpe2fs /dev/vg03/lv01 Block count: 1831418880<br /> Block size: 4096<br /> mount -o ro,noatime /dev/vg03/lv01 /mnt/raid OK... but files have been damaged / gone missing.

    Read the article

  • Why is there no facility to overload static properties in PHP?

    - by Jon
    Intro PHP allows you to overload method calls and property accesses by declaring magic methods in classes. This enables code such as: class Foo { public function __get($name) { return 42; } } $foo = new Foo; echo $foo->missingProperty; // prints "42" Apart from overloading instance properties and methods, since PHP 5.3.0 we can also overload static methods calls by overriding the magic method __callStatic. Something missing What is conspicuously missing from the available functionality is the ability to overload static properties, for example: echo Foo::$missingProperty; // fatal error: access to undeclared static property This limitation is clearly documented: Property overloading only works in object context. These magic methods will not be triggered in static context. Therefore these methods should not be declared static. As of PHP 5.3.0, a warning is issued if one of the magic overloading methods is declared static. But why? My questions are: Is there a technical reason that this functionality is not currently supported? Or perhaps a (shudder) political reason? Have there been any aborted attempts to add this functionality in the past? Most importantly, the question is not "how can I have dynamic static properties in userland PHP?". That said, if you know of an especially cute implementation based on __callStatic that you want to share then by all means do so.

    Read the article

  • 12.04 upgrade broke grub? (not wubi related)

    - by kaare
    I just updated from 11.10 to 12.04, with no major problems (it took a while to get past a request to restart ssh, mysql and some other services, but I did no fiddling by myself, everything was done by the installer). However, after restarting, grub can't do anything. Picking the new linux installation (first entry), I just get error: no such partition error: no such partition error: no such partition and picking the recovery-version just gives 5 lines instead of 3. I have windows 7 installed on a different drive, and can run it by booting from that drive instead. Picking it from the grub menu gives the same error as above (can't remember how many lines, though). I'll be honest and say that I don't remember if win 7 could be booted from grub before the update, though. In short, nothing on the grub menu works. any solutions? The grub menu changed appearance - before it was on a purple background, small letters, now it's white-on-black, big letters, looking very basic. The original installation was from a usb-drive, and I hadn't heard about wubi until I started googling this problem, so I doubt there's any connection. I really hope there are some grub-savvy people out there :) EDIT: ok. so, I made a bootable usb, and am running from that right now. when I ran the bootinfoscript, it warned me that "gawk" could not be found, using "busybox awk" instead. This may lead to unreliable results. just so you know. The contents of RESULTS.txt are: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Windows is installed in the MBR of /dev/sda. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos3)/boot/grub on this drive. => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc. sda1: __________________________________________ File system: vfat Boot sector type: Dell Utility: FAT16 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /DELLBIO.BIN /DELLRMK.BIN /COMMAND.COM sda2: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda3: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda4: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: vfat Boot sector type: Windows 7: FAT32 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows XP Boot files: /boot.ini /bootmgr /ntldr /NTDETECT.COM sdb1: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sdb2: __________________________________________ File system: swap Boot sector type: - Boot sector info: sdb3: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sdb3 and looks at sector 375893584 of the same hard drive for core.img. core.img is at this location and looks for (,msdos3)/boot/grub on this drive. Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb4: __________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sdc1: __________________________________________ File system: ntfs Boot sector type: SYSLINUX 4.06 4.06-pre1 Boot sector info: Syslinux looks at sector 4649656 of /dev/sdc1 for its second stage. SYSLINUX is installed in the directory. The integrity check of the ADV area failed. No errors found in the Boot Parameter Block. Operating System: Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg /ldlinux.sys ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 63 240,974 240,912 de Dell Utility /dev/sda2 241,664 21,213,183 20,971,520 7 NTFS / exFAT / HPFS /dev/sda3 * 21,213,184 483,151,863 461,938,680 7 NTFS / exFAT / HPFS /dev/sda4 483,151,872 488,394,751 5,242,880 f W95 Extended (LBA) /dev/sda5 483,153,920 488,394,751 5,240,832 dd Dell Media Direct Drive: sdb _______________________________________ Disk /dev/sdb: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 63 345,886,749 345,886,687 7 NTFS / exFAT / HPFS /dev/sdb2 345,888,768 361,510,911 15,622,144 82 Linux swap / Solaris /dev/sdb3 * 361,510,912 390,807,786 29,296,875 83 Linux /dev/sdb4 390,809,600 488,394,751 97,585,152 83 Linux Drive: sdc _______________________________________ Disk /dev/sdc: 8015 MB, 8015282176 bytes 255 heads, 63 sectors/track, 974 cylinders, total 15654848 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdc1 * 2,048 15,652,863 15,650,816 7 NTFS / exFAT / HPFS "blkid" output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 07D8-0411 vfat DellUtility /dev/sda2 E2765BBC765B9061 ntfs RECOVERY /dev/sda3 98DC5E54DC5E2D2E ntfs OS /dev/sda5 7061-9DF5 vfat MEDIADIRECT /dev/sdb1 01CBBB4C3374C3B0 ntfs Data1 /dev/sdb2 1ca45f3f-f888-43d1-8137-02699597189a swap /dev/sdb3 6bc1b599-ad4b-403c-a155-a5bc81211f5e ext4 /dev/sdb4 58e2b257-8608-4b11-b20b-dc162bb80b62 ext4 /dev/sdc1 0C02B64402B63316 ntfs PENDRIVE ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sdb4 /media/58e2b257-8608-4b11-b20b-dc162bb80b62 ext4 (rw,nosuid,nodev,uhelper=udisks) /dev/sdc1 /cdrom fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096) ================================ sda5/boot.ini: ================================ [boot loader] timeout=0 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Embedded" /fastdetect /KERNEL=NTOSBOOT.EXE /maxmem=1024 =========================== sdb3/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="$1" if [ "$1" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux /boot/vmlinuz-3.2.0-24-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, with Linux 3.2.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e echo 'Loading Linux 3.2.0-24-generic ...' linux /boot/vmlinuz-3.2.0-24-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-24-generic } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 3.0.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux /boot/vmlinuz-3.0.0-19-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro quiet splash $vt_handoff initrd /boot/initrd.img-3.0.0-19-generic } menuentry 'Ubuntu, with Linux 3.0.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e echo 'Loading Linux 3.0.0-19-generic ...' linux /boot/vmlinuz-3.0.0-19-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-19-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda3)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos3)' search --no-floppy --fs-uuid --set=root 98DC5E54DC5E2D2E chainloader +1 } menuentry "Microsoft Windows XP Embedded (on /dev/sda5)" --class windows --class os { insmod part_msdos insmod fat set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root 7061-9DF5 drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sdb3/etc/fstab: ================================ # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sdb3 during installation UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e / ext4 errors=remount-ro 0 1 # /home was on /dev/sdb4 during installation UUID=58e2b257-8608-4b11-b20b-dc162bb80b62 /home ext4 defaults,user_xattr 0 2 # swap was on /dev/sdb2 during installation UUID=1ca45f3f-f888-43d1-8137-02699597189a none swap sw 0 0 =================== sdb3: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.0.0-19-generic 2 = boot/initrd.img-3.2.0-24-generic 2 = boot/vmlinuz-3.0.0-19-generic 2 = boot/vmlinuz-3.2.0-24-generic 1 = vmlinuz 1 = vmlinuz.old 2 =========================== sdc1/boot/grub/grub.cfg: =========================== if loadfont /boot/grub/font.pf2 ; then set gfxmode=auto insmod efi_gop insmod efi_uga insmod gfxterm terminal_output gfxterm fi set menu_color_normal=white/black set menu_color_highlight=black/light-gray menuentry "Try Ubuntu without installing" { set gfxpayload=keep linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash -- initrd /casper/initrd.lz } menuentry "Install Ubuntu" { set gfxpayload=keep linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash -- initrd /casper/initrd.lz } menuentry "Check disc for defects" { set gfxpayload=keep linux /casper/vmlinuz boot=casper integrity-check quiet splash -- initrd /casper/initrd.lz } ========================= sdc1/syslinux/syslinux.cfg: ========================== # D-I config version 2.0 include menu.cfg default vesamenu.c32 prompt 0 timeout 50 # If you would like to use the new menu and be presented with the option to install or run from USB at startup, remove # from the following line. This line was commented out (by request of many) to allow the old menu to be presented and to enable booting straight into the Live Environment! # ui gfxboot bootlogo =================== sdc1: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) ?? = ?? boot/grub/grub.cfg 0 ================= sdc1: Location of files loaded by Syslinux: ================== GiB - GB File Fragment(s) ?? = ?? ldlinux.sys 1 ?? = ?? syslinux/chain.c32 1 ?? = ?? syslinux/gfxboot.c32 1 ?? = ?? syslinux/syslinux.cfg 0 ?? = ?? syslinux/vesamenu.c32 1 ============== sdc1: Version of COM32(R) files used by Syslinux: =============== syslinux/chain.c32 : COM32R module (v4.xx) syslinux/gfxboot.c32 : COM32R module (v4.xx) syslinux/vesamenu.c32 : COM32R module (v4.xx) =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in ./bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected

    Read the article

  • When I shutdown the computer, it restarts

    - by Prabu
    I am unable to shutdown. Whenever I try to shutdown, it reboots. I am running Ubuntu 12.10. I have run the boot-repair and this is the result: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info November 20th 2012] ============================= Boot Info Summary: =============================== => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 1 for (,msdos1)/boot/grub. sda1: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.10 Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/i386-pc/core.img sda2: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 2,048 1,936,809,983 1,936,807,936 83 Linux /dev/sda2 1,936,812,030 1,953,523,711 16,711,682 5 Extended /dev/sda5 1,936,812,032 1,953,523,711 16,711,680 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 229a5484-7659-4ce1-98ce-2f05f61a1ffa ext4 /dev/sda5 6c6dca25-ab67-4de4-8602-26fdb6154781 swap /dev/sr0 iso9660 Ubuntu 12.10 amd64 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda1/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=auto load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=10 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff initrd /boot/initrd.img-3.5.0-19-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { menuentry 'Ubuntu, with Linux 3.5.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-19-generic-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-19-generic ...' linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-19-generic } menuentry 'Ubuntu, with Linux 3.5.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-19-generic-recovery-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-19-generic ...' linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-19-generic } menuentry 'Ubuntu, with Linux 3.5.0-17-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-17-generic-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-17-generic ...' linux /boot/vmlinuz-3.5.0-17-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-17-generic } menuentry 'Ubuntu, with Linux 3.5.0-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-17-generic-recovery-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-17-generic ...' linux /boot/vmlinuz-3.5.0-17-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-17-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda1/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda1 during installation UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=6c6dca25-ab67-4de4-8602-26fdb6154781 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda1: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 200.155235291 = 214.915047424 boot/grub/grub.cfg 1 40.280788422 = 43.251167232 boot/initrd.img-3.5.0-17-generic 1 2.468288422 = 2.650304512 boot/initrd.img-3.5.0-19-generic 1 200.149234772 = 214.908604416 boot/vmlinuz-3.5.0-17-generic 1 1.990135193 = 2.136891392 boot/vmlinuz-3.5.0-19-generic 1 2.468288422 = 2.650304512 initrd.img 1 1.990135193 = 2.136891392 vmlinuz 1 1.990135193 = 2.136891392 vmlinuz.old 1 =============================== StdErr Messages: =============================== cat: write error: Broken pipe File descriptor 8 (/proc/6297/mounts) leaked on lvscan invocation. Parent PID 13390: bash No volume groups found ADDITIONAL INFORMATION : =================== log of boot-repair 2012-12-17__01h53 =================== boot-repair version : 3.197~ppa1~quantal boot-sav version : 3.197~ppa1~quantal glade2script version : 3.2.2~ppa45~quantal boot-sav-extra version : 3.197~ppa1~quantal boot-repair is executed in live-session (Ubuntu 12.10, quantal, Ubuntu, x86_64) CPU op-mode(s): 32-bit, 64-bit file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity =================== os-prober: /dev/sda1:Ubuntu 12.10 (12.10):Ubuntu:linux =================== blkid: /dev/loop0: TYPE="squashfs" /dev/sr0: LABEL="Ubuntu 12.10 amd64" TYPE="iso9660" /dev/sda1: UUID="229a5484-7659-4ce1-98ce-2f05f61a1ffa" TYPE="ext4" /dev/sda5: UUID="6c6dca25-ab67-4de4-8602-26fdb6154781" TYPE="swap" 1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS. Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== sda1/etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi=force" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" =================== sda1/etc/grub.d/ : drwxr-xr-x 2 root root 4096 Oct 17 14:59 grub.d total 72 -rwxr-xr-x 1 root root 7541 Oct 14 17:36 00_header -rwxr-xr-x 1 root root 5488 Oct 4 09:30 05_debian_theme -rwxr-xr-x 1 root root 10891 Oct 14 17:36 10_linux -rwxr-xr-x 1 root root 10258 Oct 14 17:36 20_linux_xen -rwxr-xr-x 1 root root 1688 Oct 11 14:10 20_memtest86+ -rwxr-xr-x 1 root root 10976 Oct 14 17:36 30_os-prober -rwxr-xr-x 1 root root 1426 Oct 14 17:36 30_uefi-firmware -rwxr-xr-x 1 root root 214 Oct 14 17:36 40_custom -rwxr-xr-x 1 root root 216 Oct 14 17:36 41_custom -rw-r--r-- 1 root root 483 Oct 14 17:36 README =================== UEFI/Legacy mode: This live-session is not in EFI-mode. SecureBoot maybe enabled. =================== PARTITIONS & DISKS: sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes =================== parted -l: Model: ATA ST1000DM003-1CH1 (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 992GB 992GB primary ext4 boot 2 992GB 1000GB 8556MB extended 5 992GB 1000GB 8556MB logical linux-swap(v1) Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: Can't have a partition outside the disk! =================== parted -lm: BYT; /dev/sda:1000GB:scsi:512:4096:msdos:ATA ST1000DM003-1CH1; 1:1049kB:992GB:992GB:ext4::boot; 2:992GB:1000GB:8556MB:::; 5:992GB:1000GB:8556MB:linux-swap(v1)::; Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: Can't have a partition outside the disk! =================== mount: /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) gvfsd-fuse on /run/user/ubuntu/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu) /dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): alarm ashmem autofs binder block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hidraw1 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usb vga_arbiter vhost-net zero ls /dev/mapper: control =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on /cow overlayfs 3.9G 100M 3.8G 3% / udev devtmpfs 3.9G 12K 3.9G 1% /dev tmpfs tmpfs 1.6G 864K 1.6G 1% /run /dev/sr0 iso9660 763M 763M 0 100% /cdrom /dev/loop0 squashfs 717M 717M 0 100% /rofs tmpfs tmpfs 3.9G 32K 3.9G 1% /tmp none tmpfs 5.0M 4.0K 5.0M 1% /run/lock none tmpfs 3.9G 176K 3.9G 1% /run/shm none tmpfs 100M 52K 100M 1% /run/user /dev/sda1 ext4 910G 26G 838G 3% /mnt/boot-sav/sda1 =================== fdisk -l: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000da1e9 Device Boot Start End Blocks Id System /dev/sda1 * 2048 1936809983 968403968 83 Linux /dev/sda2 1936812030 1953523711 8355841 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 1936812032 1953523711 8355840 82 Linux swap / Solaris Partition outside the disk detected. =================== Recommended repair Recommended-Repair This setting will reinstall the grub2 of sda1 into the MBR of sda. Additional repair will be performed: unhide-bootmenu-10s Unhide GRUB boot menu in sda1/etc/default/grub grub-install (GRUB) 2.00-7ubuntu11,grub-install (GRUB) 2. Reinstall the GRUB of sda1 into the MBR of sda Installation finished. No error reported. grub-install /dev/sda: exit code of grub-install /dev/sda:0 chroot /mnt/boot-sav/sda1 update-grub Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.5.0-19-generic Found initrd image: /boot/initrd.img-3.5.0-19-generic Found linux image: /boot/vmlinuz-3.5.0-17-generic Found initrd image: /boot/initrd.img-3.5.0-17-generic Found memtest86+ image: /boot/memtest86+.bin Unhide GRUB boot menu in sda1/boot/grub/grub.cfg Boot successfully repaired. You can now reboot your computer.

    Read the article

  • Build and migrated to software raid (mdadm) on GPT disk, now can't assemble array

    - by John H
    mdadm, gpt issues, unrecognized partitions. Simplified question: How do I get mdadm to recognize GPT partitions? I have been attempting to convert/copy my Ubuntu 11.10 OS from a single drive to software raid 1. I have done similar in the past, but in this case, I was adding in a drive that has been configured for GPT and I tried to work with that without fully looking into the implications. Currently, I have a non-booting mdadm RAID 1 array of /dev/md127 (the OS assigned that and it keeps picking up). I am booting off of live USB keys, currently System Rescue CD from sysresccd. While gdisk and parted can see all the partitions, most of the OS utilities do not, including mdadm. My main goal is just to make the raid array accessible so I can get pull the data and start fresh (without using GPT). /dev/md127 /dev/sda /dev/sda1 <- GPT type partition /dev/sda1 <- exists within the GPT part, member of md127 /dev/sda2 <- exists within the GPT part, empty /dev/sdb /dev/sdb1 <- GPT type partition /dev/sdb1 <- exists within the GPT part, member of md127 History: POINT A: The original OS was install on sda (actually /dev/sda6). I used a the Ubuntu live usb to add sdb. I got warning from fdisk about GPT so I used gdisk to create a raid partition (sdb1) and mdadm to create a raid1 mirror with a missing drive. I had many issues getting this working (including being unable to get grub to install) but I eventually got it to boot using grub on sda and /dev/md127 off of sdb. So at point A, I had copied my OS from sda6 to md127 on sdb. I then booted into a rescue mode and attempted to get a bootloader onto sdb, which failed. I then discovered my mistake: I had installed the raid onto sdb instead of sdb1, essentially overwriting the sdb1 partition. POINT B: I now had two copies of my data- one on md127/sdb, and one on sda. I destroyed data on sda and created a new GPT table on sda. I then created sda1 for the raid array, and sda2 for a scratch partition. I added sda1 into the raid array and let it rebuild. md127 now covered /dev/sdb and /dev/sda1 as fully active and synced. POINT C: I rebooted onto linux rescue again and was still able to access the raid array. I then removed /dev/sdb from the array and created /dev/sdb1 for the raid. I added sdb1 to the array and let it sync. I was able to mount and access /dev/md127 without issues. Once it completed, both /dev/sda1 and /dev/sdb1 were GPT partitions and actively syncing. POINT D (current): I rebooted again to test if the array would boot and grub failed to load. I booted off of my live thumb drive and found that I can no longer assemble the raid array. mdadm doesn't see the required partitions. -- root@freshdesk /root % uname -a Linux freshdesk 3.0.24-std251-amd64 #2 SMP Sat Mar 17 12:08:55 UTC 2012 x86_64 AMD Athlon(tm) II X4 645 Processor AuthenticAMD GNU/Linux === /proc/partitions and parted look good: root@freshdesk /root % cat /proc/partitions major minor #blocks name 7 0 301788 loop0 8 0 976762584 sda 8 1 732579840 sda1 8 2 244181703 sda2 8 16 732574584 sdb 8 17 732573543 sdb1 8 32 7876607 sdc 8 33 7873349 sdc1 (parted) print all Model: ATA ST31000528AS (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 750GB 750GB ext4 2 750GB 1000GB 250GB Linux/Windows data Model: ATA SAMSUNG HD753LJ (scsi) Disk /dev/sdb: 750GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 750GB 750GB ext4 Linux RAID raid Model: SanDisk SanDisk Cruzer (scsi) Disk /dev/sdc: 8066MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 31.7kB 8062MB 8062MB primary fat32 boot, lba === # no sda2, and I double the sdb1 is the one shown in parted root@freshdesk /root % blkid /dev/loop0: TYPE="squashfs" /dev/sda1: UUID="75dd6c2d-f0a8-4302-9da4-792cc7d72355" TYPE="ext4" /dev/sdc1: LABEL="PENDRIVE" UUID="1102-3720" TYPE="vfat" /dev/sdb1: UUID="2dd89f15-65bb-ff88-e368-bf24bd0fce41" TYPE="linux_raid_member" root@freshdesk /root % mdadm -E /dev/sda1 mdadm: No md superblock detected on /dev/sda1. # this is probably a result of me attempting to force the array up, putting superblocks on the GPT partition root@freshdesk /root % mdadm -E /dev/sdb1 /dev/sdb1: Magic : a92b4efc Version : 0.90.00 UUID : 2dd89f15:65bbff88:e368bf24:bd0fce41 Creation Time : Fri Mar 30 19:25:30 2012 Raid Level : raid1 Used Dev Size : 732568320 (698.63 GiB 750.15 GB) Array Size : 732568320 (698.63 GiB 750.15 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 127 Update Time : Sat Mar 31 12:39:38 2012 State : clean Active Devices : 1 Working Devices : 2 Failed Devices : 1 Spare Devices : 1 Checksum : a7d038b3 - correct Events : 20195 Number Major Minor RaidDevice State this 2 8 17 2 spare /dev/sdb1 0 0 8 1 0 active sync /dev/sda1 1 1 0 0 1 faulty removed 2 2 8 17 2 spare /dev/sdb1 === root@freshdesk /root % mdadm -A /dev/md127 /dev/sda1 /dev/sdb1 mdadm: no recogniseable superblock on /dev/sda1 mdadm: /dev/sda1 has no superblock - assembly aborted root@freshdesk /root % mdadm -A /dev/md127 /dev/sdb1 mdadm: cannot open device /dev/sdb1: Device or resource busy mdadm: /dev/sdb1 has no superblock - assembly aborted

    Read the article

  • GPT partition !! HELP!!

    - by fixxxer
    Hi, I have a GPT partitioned portable HDD which is not being detected by Windows XP and a non working CD Drive.Can I download and use Ubuntu to boot from and access the data? Or is there some other way?

    Read the article

  • What is the best way to partition large tables in SQL Server?

    - by RyanFetz
    In a recent project the "lead" developer designed a database schema where "larger" tables would be split across two seperate databases with a view on the main database which unioned the two seperate database-tables together. The main database is what the application was driven off of so these tables looked and felt like ordinary tables (except some quirkly things around updating). This seemed like a HUGE performance problem. We do see problems with performance around these tables but nothing to make him change his mind about his design. Just wondering what is the best way to do this, or if it is even worth doing?

    Read the article

  • Azure - Part 4 - Table Storage Service in Windows Azure

    - by Shaun
    In Windows Azure platform there are 3 storage we can use to save our data on the cloud. They are the Table, Blob and Queue. Before the Chinese New Year Microsoft announced that Azure SDK 1.1 had been released and it supports a new type of storage – Drive, which allows us to operate NTFS files on the cloud. I will cover it in the coming few posts but now I would like to talk a bit about the Table Storage.   Concept of Table Storage Service The most common development scenario is to retrieve, create, update and remove data from the data storage. In the normal way we communicate with database. When we attempt to move our application over to the cloud the most common requirement should be have a storage service. Windows Azure provides a in-build service that allow us to storage the structured data, which is called Windows Azure Table Storage Service. The data stored in the table service are like the collection of entities. And the entities are similar to rows or records in the tradtional database. An entity should had a partition key, a row key, a timestamp and set of properties. You can treat the partition key as a group name, the row key as a primary key and the timestamp as the identifer for solving the concurrency problem. Different with a table in a database, the table service does not enforce the schema for tables, which means you can have 2 entities in the same table with different property sets. The partition key is being used for the load balance of the Azure OS and the group entity transaction. As you know in the cloud you will never know which machine is hosting your application and your data. It could be moving based on the transaction weight and the number of the requests. If the Azure OS found that there are many requests connect to your Book entities with the partition key equals “Novel” it will move them to another idle machine to increase the performance. So when choosing the partition key for your entities you need to make sure they indecate the category or gourp information so that the Azure OS can perform the load balance as you wish.   Consuming the Table Although the table service looks like a database, you cannot access it through the way you are using now, neither ADO.NET nor ODBC. The table service exposed itself by ADO.NET Data Service protocol, which allows you can consume it through the RESTful style by Http requests. The Azure SDK provides a sets of classes for us to connect it. There are 2 classes we might need: TableServiceContext and TableServiceEntity. The TableServiceContext inherited from the DataServiceContext, which represents the runtime context of the ADO.NET data service. It provides 4 methods mainly used by us: CreateQuery: It will create a IQueryable instance from a given type of entity. AddObject: Add the specified entity into Table Service. UpdateObject: Update an existing entity in the Table Service. DeleteObject: Delete an entity from the Table Service. Beofre you operate the table service you need to provide the valid account information. It’s something like the connect string of the database but with your account name and the account key when you created the storage service on the Windows Azure Development Portal. After getting the CloudStorageAccount you can create the CloudTableClient instance which provides a set of methods for using the table service. A very useful method would be CreateTableIfNotExist. It will create the table container for you if it’s not exsited. And then you can operate the eneities to that table through the methods I mentioned above. Let me explain a bit more through an exmaple. We always like code rather than sentence.   Straightforward Accessing to the Table Here I would like to build a WCF service on the Windows Azure platform, and for now just one requirement: it would allow the client to create an account entity on the table service. The WCF service would have a method named Register and accept an instance of the account which the client wants to create. After perform some validation it will add the entity into the table service. So the first thing I should do is to create a Cloud Application on my VIstial Studio 2010 RC. (The Azure SDK 1.1 only supports VS2008 and VS2010 RC.) The solution should be like this below. Then I added a configuration items for the storage account through the Settings section under the cloud project. (Double click the Services file under Roles folder and navigate to the Setting section.) This setting will be used when to retrieve my storage account information. Since for now I just in the development phase I will select “UseDevelopmentStorage=true”. And then I navigated to the WebRole.cs file under my WCF project. If you have read my previous posts you would know that this file defines the process when the application start, and terminate on the cloud. What I need to do is to when the application start, set the configuration publisher to load my config file with the config name I specified. So the code would be like below. I removed the original service and contract created by the VS template and add my IAccountService contract and its implementation class - AccountService. And I add the service method Register with the parameters: email, password and it will return a boolean value to indicates the result which is very simple. At this moment if I press F5 the application will be established on my local development fabric and I can see my service runs well through the browser. Let’s implement the service method Rigister, add a new entity to the table service. As I said before the entities you want to store in the table service must have 3 properties: partition key, row key and timespan. You can create a class with these 3 properties. The Azure SDK provides us a base class for that named TableServiceEntity in Microsoft.WindowsAzure.StorageClient namespace. So what we need to do is more simply, create a class named Account and let it derived from the TableServiceEntity. And I need to add my own properties: Email, Password, DateCreated and DateDeleted. The DateDeleted is a nullable date time value to indecate whether this entity had been deleted and when. Do you notice that I missed something here? Yes it’s the partition key and row key I didn’t assigned. The TableServiceEntity base class defined 2 constructors one was a parameter-less constructor which will be used to fill values into the properties from the table service when retrieving data. The other was one with 2 parameters: partition key and row key. As I said below the partition key may affect the load balance and the row key must be unique so here I would like to use the email as the parition key and the email plus a Guid as the row key. OK now we finished the entity class we need to store onto the table service. The next step is to create a data access class for us to add it. Azure SDK gives us a base class for it named TableServiceContext as I mentioned below. So let’s create a class for operate the Account entities. The TableServiceContext need the storage account information for its constructor. It’s the combination of the storage service URI that we will create on Windows Azure platform, and the relevant account name and key. The TableServiceContext will use this information to find the related address and verify the account to operate the storage entities. Hence in my AccountDataContext class I need to override this constructor and pass the storage account into it. All entities will be saved in the table storage with one or many tables which we call them “table containers”. Before we operate an entity we need to make sure that the table container had been created on the storage. There’s a method we can use for that: CloudTableClient.CreateTableIfNotExist. So in the constructor I will perform it firstly to make sure all method will be invoked after the table had been created. Notice that I passed the storage account enpoint URI and the credentials to specify where my storage is located and who am I. Another advise is that, make your entity class name as the same as the table name when create the table. It will increase the performance when you operate it over the cloud especially querying. Since the Register WCF method will add a new account into the table service, here I will create a relevant method to add the account entity. Before implement, I should add a reference - System.Data.Services.Client to the project. This reference provides some common method within the ADO.NET Data Service which can be used in the Windows Azure Table Service. I will use its AddObject method to create my account entity. Since the table service are not fully implemented the ADO.NET Data Service, there are some methods in the System.Data.Services.Client that TableServiceContext doesn’t support, such as AddLinks, etc. Then I implemented the serivce method to add the account entity through the AccountDataContext. You can see in the service implmentation I load the storage account information through my configuration file and created the account table entity from the parameters. Then I created the AccountDataContext. If it’s my first time to invoke this method the constructor of the AccountDataContext will create a table container for me. Then I use Add method to add the account entity into the table. Next, let’s create a farely simple client application to test this service. I created a windows console application and added a service reference to my WCF service. The metadata information of the WCF service cannot be retrieved if it’s deployed on the Windows Azure even though the <serviceMetadata httpGetEnabled="true"/> had been set. If we need to get its metadata we can deploy it on the local development service and then changed the endpoint to the address which is on the cloud. In the client side app.config file I specified the endpoint to the local development fabric address. And the just implement the client to let me input an email and a password then invoke the WCF service to add my acocunt. Let’s run my application and see the result. Of course it should return TRUE to me. And in the local SQL Express I can see the data had been saved in the table.   Summary In this post I explained more about the Windows Azure Table Storage Service. I also created a small application for demostration of how to connect and consume it through the ADO.NET Data Service Managed Library provided within the Azure SDK. I only show how to create an eneity in the storage service. In the next post I would like to explain about how to query the entities with conditions thruogh LINQ. I also would like to refactor my AccountDataContext class to make it dyamic for any kinds of entities.   Hope this helps, Shaun   All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

    Read the article

  • Dual Boot issues with Windows 7 and Ubuntu

    - by Michael
    I'm finding myself in a rather unique situation. I've read through just about every resource I can find about this and while things have helped me understand some background, I haven't yet been able to find a solution. So I'm asking here. I originally had just a Windows 7 64-bit OS installation on my desktop. Learning that I couldn't do anything with Apache, PHP and MySql from within a 64-bit system, I did some research and found out that I could use Ubuntu. I've installed the latest version: 11.04. I created a CD to install Ubuntu from and the install went just fine. I installed it side-by-side with Windows 7. I can boot into Ubuntu just fine through the dual-boot option. When I reboot to load Windows though, the Grub2 list shows Windows 7 (loader) and when I select this option the Windows System Recovery loads instead of the actual OS. I haven't made it past there because I didn't know what to do. I just shut the computer down and rebooted into Ubuntu. I've been working for the last hour and a half to try to figure out how to boot into the Windows 7 OS and I haven't got a clue. While I'm somewhat proficient with Windows 7, I'm totally new to Ubuntu, so if you do know what needs to happen, please keep it simple enough that I'll be able to understand. Thanks for all your help in advance. Here's the results after using the Boot Info Script: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #5 for cbh. => Windows is installed in the MBR of /dev/sdb => Grub 2 is installed in the MBR of /dev/mapper/pdc_bdadcfbdif and looks on the same drive in partition #5 for cbh. sda1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy sda2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy sda3: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy sdb1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: /bootmgr /Boot/BCD sdb2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb3: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: /bootmgr /boot/BCD sdb4: _________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sdb5: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 11.04 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb6: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: pdc_bdadcfbdif1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: /bootmgr /Boot/BCD pdc_bdadcfbdif2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe pdc_bdadcfbdif3: _________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy mount: unknown filesystem type '' =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sda1 * 2,048 206,847 204,800 7 HPFS/NTFS /dev/sda2 206,911 1,440,372,735 1,440,165,825 7 HPFS/NTFS /dev/sda3 1,440,372,736 1,464,856,575 24,483,840 7 HPFS/NTFS Drive: sdb ___________________ _____________________________________________________ Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdb1 * 2,048 206,847 204,800 7 HPFS/NTFS /dev/sdb2 206,911 1,342,554,688 1,342,347,778 7 HPFS/NTFS /dev/sdb3 1,930,344,448 1,953,521,663 23,177,216 7 HPFS/NTFS /dev/sdb4 1,342,556,158 1,930,344,447 587,788,290 5 Extended /dev/sdb5 1,342,556,160 1,896,806,399 554,250,240 83 Linux /dev/sdb6 1,896,808,448 1,930,344,447 33,536,000 82 Linux swap / Solaris Drive: pdc_bdadcfbdif ___________________ _____________________________________________________ Disk /dev/mapper/pdc_bdadcfbdif: 750.0 GB, 749999947776 bytes 255 heads, 63 sectors/track, 91182 cylinders, total 1464843648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/mapper/pdc_bdadcfbdif1 * 2,048 206,847 204,800 7 HPFS/NTFS /dev/mapper/pdc_bdadcfbdif2 206,911 1,440,372,735 1,440,165,825 7 HPFS/NTFS /dev/mapper/pdc_bdadcfbdif3 1,440,372,736 1,464,856,575 24,483,840 7 HPFS/NTFS /dev/mapper/pdc_bdadcfbdif3 ends after the last sector of /dev/mapper/pdc_bdadcfbdif blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/mapper/pdc_bdadcfbdif1 888E54CC8E54B482 ntfs SYSTEM /dev/mapper/pdc_bdadcfbdif2 C2766BF6766BEA1D ntfs OS /dev/mapper/pdc_bdadcfbdif: PTTYPE="dos" /dev/sda1 888E54CC8E54B482 ntfs SYSTEM /dev/sda2 C2766BF6766BEA1D ntfs OS /dev/sda3 BE6CA31D6CA2CF87 ntfs HP_RECOVERY /dev/sda promise_fasttrack_raid_member /dev/sdb1 20B65685B6565B7C ntfs SYSTEM /dev/sdb2 B4467A314679F508 ntfs HP /dev/sdb3 6E10B7A410B77227 ntfs FACTORY_IMAGE /dev/sdb4: PTTYPE="dos" /dev/sdb5 266f9801-cf4f-4acc-affa-2092be035f0c ext4 /dev/sdb6 1df35749-a887-45ff-a3de-edd52239847d swap /dev/sdb: PTTYPE="dos" error: /dev/mapper/pdc_bdadcfbdif3: No such file or directory error: /dev/sdc: No medium found error: /dev/sdd: No medium found error: /dev/sde: No medium found error: /dev/sdf: No medium found error: /dev/sdg: No medium found ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sdb5 / ext4 (rw,errors=remount-ro,commit=0) =========================== sdb5/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 2.6.38-8-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c linux /boot/vmlinuz-2.6.38-8-generic-pae root=UUID=266f9801-cf4f-4acc- affa-2092be035f0c ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.38-8-generic-pae } menuentry 'Ubuntu, with Linux 2.6.38-8-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c echo 'Loading Linux 2.6.38-8-generic-pae ...' linux /boot/vmlinuz-2.6.38-8-generic-pae root=UUID=266f9801-cf4f-4acc-affa-2092be035f0c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.38-8-generic-pae } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sdb1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(/dev/sdb,msdos1)' search --no-floppy --fs-uuid --set=root 20B65685B6565B7C chainloader +1 } menuentry "Windows Recovery Environment (loader) (on /dev/sdb3)" --class windows --class os { insmod part_msdos insmod ntfs set root='(/dev/sdb,msdos3)' search --no-floppy --fs-uuid --set=root 6E10B7A410B77227 drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sdb5/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sdb5 during installation UUID=266f9801-cf4f-4acc-affa-2092be035f0c / ext4 errors=remount-ro 0 1 # swap was on /dev/sdb6 during installation UUID=1df35749-a887-45ff-a3de-edd52239847d none swap sw 0 0 =================== sdb5: Location of files loaded by Grub: =================== 900.1GB: boot/grub/core.img 825.0GB: boot/grub/grub.cfg 688.7GB: boot/initrd.img-2.6.38-8-generic-pae 688.0GB: boot/vmlinuz-2.6.38-8-generic-pae 688.7GB: initrd.img 688.0GB: vmlinuz =========================== Unknown MBRs/Boot Sectors/etc ======================= Unknown BootLoader on pdc_bdadcfbdif3 =======Devices which don't seem to have a corresponding hard drive============== sdc sdd sde sdf sdg =============================== StdErr Messages: =============================== ERROR: dos: partition address past end of RAID device hexdump: /dev/mapper/pdc_bdadcfbdif3: No such file or directory hexdump: /dev/mapper/pdc_bdadcfbdif3: No such file or directory ERROR: dos: partition address past end of RAID device

    Read the article

  • SQL SERVER – Solution to Puzzle – Simulate LEAD() and LAG() without Using SQL Server 2012 Analytic Function

    - by pinaldave
    Earlier I wrote a series on SQL Server Analytic Functions of SQL Server 2012. During the series to keep the learning maximum and having fun, we had few puzzles. One of the puzzle was simulating LEAD() and LAG() without using SQL Server 2012 Analytic Function. Please read the puzzle here first before reading the solution : Write T-SQL Self Join Without Using LEAD and LAG. When I was originally wrote the puzzle I had done small blunder and the question was a bit confusing which I corrected later on but wrote a follow up blog post on over here where I describe the give-away. Quick Recap: Generate following results without using SQL Server 2012 analytic functions. I had received so many valid answers. Some answers were similar to other and some were very innovative. Some answers were very adaptive and some did not work when I changed where condition. After selecting all the valid answer, I put them in table and ran RANDOM function on the same and selected winners. Here are the valid answers. No Joins and No Analytic Functions Excellent Solution by Geri Reshef – Winner of SQL Server Interview Questions and Answers (India | USA) WITH T1 AS (SELECT Row_Number() OVER(ORDER BY SalesOrderDetailID) N, s.SalesOrderID, s.SalesOrderDetailID, s.OrderQty FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663)) SELECT SalesOrderID,SalesOrderDetailID,OrderQty, CASE WHEN N%2=1 THEN MAX(CASE WHEN N%2=0 THEN SalesOrderDetailID END) OVER (Partition BY (N+1)/2) ELSE MAX(CASE WHEN N%2=1 THEN SalesOrderDetailID END) OVER (Partition BY N/2) END LeadVal, CASE WHEN N%2=1 THEN MAX(CASE WHEN N%2=0 THEN SalesOrderDetailID END) OVER (Partition BY N/2) ELSE MAX(CASE WHEN N%2=1 THEN SalesOrderDetailID END) OVER (Partition BY (N+1)/2) END LagVal FROM T1 ORDER BY SalesOrderID, SalesOrderDetailID, OrderQty; GO No Analytic Function and Early Bird Excellent Solution by DHall – Winner of Pluralsight 30 days Subscription -- a query to emulate LEAD() and LAG() ;WITH s AS ( SELECT 1 AS ldOffset, -- equiv to 2nd param of LEAD 1 AS lgOffset, -- equiv to 2nd param of LAG NULL AS ldDefVal, -- equiv to 3rd param of LEAD NULL AS lgDefVal, -- equiv to 3rd param of LAG ROW_NUMBER() OVER (ORDER BY SalesOrderDetailID) AS row, SalesOrderID, SalesOrderDetailID, OrderQty FROM Sales.SalesOrderDetail WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ) SELECT s.SalesOrderID, s.SalesOrderDetailID, s.OrderQty, ISNULL( sLd.SalesOrderDetailID, s.ldDefVal) AS LeadValue, ISNULL( sLg.SalesOrderDetailID, s.lgDefVal) AS LagValue FROM s LEFT OUTER JOIN s AS sLd ON s.row = sLd.row - s.ldOffset LEFT OUTER JOIN s AS sLg ON s.row = sLg.row + s.lgOffset ORDER BY s.SalesOrderID, s.SalesOrderDetailID, s.OrderQty No Analytic Function and Partition By Excellent Solution by DHall – Winner of Pluralsight 30 days Subscription /* a query to emulate LEAD() and LAG() */ ;WITH s AS ( SELECT 1 AS LeadOffset, /* equiv to 2nd param of LEAD */ 1 AS LagOffset, /* equiv to 2nd param of LAG */ NULL AS LeadDefVal, /* equiv to 3rd param of LEAD */ NULL AS LagDefVal, /* equiv to 3rd param of LAG */ /* Try changing the values of the 4 integer values above to see their effect on the results */ /* The values given above of 0, 0, null and null behave the same as the default 2nd and 3rd parameters to LEAD() and LAG() */ ROW_NUMBER() OVER (ORDER BY SalesOrderDetailID) AS row, SalesOrderID, SalesOrderDetailID, OrderQty FROM Sales.SalesOrderDetail WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ) SELECT s.SalesOrderID, s.SalesOrderDetailID, s.OrderQty, ISNULL( sLead.SalesOrderDetailID, s.LeadDefVal) AS LeadValue, ISNULL( sLag.SalesOrderDetailID, s.LagDefVal) AS LagValue FROM s LEFT OUTER JOIN s AS sLead ON s.row = sLead.row - s.LeadOffset /* Try commenting out this next line when LeadOffset != 0 */ AND s.SalesOrderID = sLead.SalesOrderID /* The additional join criteria on SalesOrderID above is equivalent to PARTITION BY SalesOrderID in the OVER clause of the LEAD() function */ LEFT OUTER JOIN s AS sLag ON s.row = sLag.row + s.LagOffset /* Try commenting out this next line when LagOffset != 0 */ AND s.SalesOrderID = sLag.SalesOrderID /* The additional join criteria on SalesOrderID above is equivalent to PARTITION BY SalesOrderID in the OVER clause of the LAG() function */ ORDER BY s.SalesOrderID, s.SalesOrderDetailID, s.OrderQty No Analytic Function and CTE Usage Excellent Solution by Pravin Patel - Winner of SQL Server Interview Questions and Answers (India | USA) --CTE based solution ; WITH cteMain AS ( SELECT SalesOrderID, SalesOrderDetailID, OrderQty, ROW_NUMBER() OVER (ORDER BY SalesOrderDetailID) AS sn FROM Sales.SalesOrderDetail WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ) SELECT m.SalesOrderID, m.SalesOrderDetailID, m.OrderQty, sLead.SalesOrderDetailID AS leadvalue, sLeg.SalesOrderDetailID AS leagvalue FROM cteMain AS m LEFT OUTER JOIN cteMain AS sLead ON sLead.sn = m.sn+1 LEFT OUTER JOIN cteMain AS sLeg ON sLeg.sn = m.sn-1 ORDER BY m.SalesOrderID, m.SalesOrderDetailID, m.OrderQty No Analytic Function and Co-Related Subquery Usage Excellent Solution by Pravin Patel – Winner of SQL Server Interview Questions and Answers (India | USA) -- Co-Related subquery SELECT m.SalesOrderID, m.SalesOrderDetailID, m.OrderQty, ( SELECT MIN(SalesOrderDetailID) FROM Sales.SalesOrderDetail AS l WHERE l.SalesOrderID IN (43670, 43669, 43667, 43663) AND l.SalesOrderID >= m.SalesOrderID AND l.SalesOrderDetailID > m.SalesOrderDetailID ) AS lead, ( SELECT MAX(SalesOrderDetailID) FROM Sales.SalesOrderDetail AS l WHERE l.SalesOrderID IN (43670, 43669, 43667, 43663) AND l.SalesOrderID <= m.SalesOrderID AND l.SalesOrderDetailID < m.SalesOrderDetailID ) AS leag FROM Sales.SalesOrderDetail AS m WHERE m.SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY m.SalesOrderID, m.SalesOrderDetailID, m.OrderQty This was one of the most interesting Puzzle on this blog. Giveaway Winners will get following giveaways. Geri Reshef and Pravin Patel SQL Server Interview Questions and Answers (India | USA) DHall Pluralsight 30 days Subscription Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, Readers Contribution, Readers Question, SQL, SQL Authority, SQL Function, SQL Puzzle, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Installing Ubuntu 12.04.1 x64 with Fake RAID 1 [SOLVED]

    - by Arkadius
    I had: Software: Dual boot with Windows XP Ubuntu 10.04 LTS x32 Hardware Fake RAID 1 (mirroring) with 2x1 TB: Partition 1 - Windows Partition 2 - SWAP Partition 3 - / (root) Partition 4 - Extended Partition 5 - /home Partition 6 - /data arek@domek:/var/log/installer$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de1b9 Device Boot Start End Blocks Id System /dev/sda1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sda2 524297340 528506369 2104515 82 Linux swap / Solaris /dev/sda3 528506370 570468149 20980890 83 Linux /dev/sda4 570468150 1953118439 691325145 5 Extended /dev/sda5 570468213 675340469 52436128+ 83 Linux /dev/sda6 675340533 1953118439 638888953+ 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de1b9 Device Boot Start End Blocks Id System /dev/sdb1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sdb2 524297340 528506369 2104515 82 Linux swap / Solaris /dev/sdb3 528506370 570468149 20980890 83 Linux /dev/sdb4 570468150 1953118439 691325145 5 Extended /dev/sdb5 570468213 675340469 52436128+ 83 Linux /dev/sdb6 675340533 1953118439 638888953+ 83 Linux arek@domek:/var/log/installer$ ls -l /dev/mapper/ total 0 crw------- 1 root root 10, 236 Oct 7 20:17 control lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha -> ../dm-0 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha1 -> ../dm-1 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha2 -> ../dm-2 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha3 -> ../dm-3 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha4 -> ../dm-4 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha5 -> ../dm-5 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha6 -> ../dm-6 I wanted to upgrade from 10.04 x32 to 12.04 x64 using FRESH installation. So, run installation of Ubuntu 12.04.1 x64 LTS using alternate CD. During the installation I selected manual partitioning and to: - Use and Format / (root) - Use and Format SWAP - Use and Keep data on /home - Use and Keep data on /data After I clicked "Continue" I get error creating and formatting SWAP partition. I go to terminal with Alt + F2 (?) and hit enter. I discovered that there was visible RAID as only disk with NO partitions. Something like this: arek@domek:/var/log/installer$ ls -l /dev/mapper/ lrwxrwxrwx 1 root root 7 Oct 7 20:17 /dev/mapper/pdc_jhjbcaha -> ../dm-0 arek@domek:/var/log/installer$ ls -l /dev/dm* brw-rw---- 1 root disk 252, 0 Oct 7 20:17 /dev/dm-0 So I switched to log console Alt+F3 (?) and saw errors like below: Oct 7 14:02:45 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Oct 7 14:02:45 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Oct 7 14:02:45 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing Oct 7 14:02:45 anna-install: Installing dmraid-udeb Oct 7 14:02:45 anna[12599]: DEBUG: retrieving dmraid-udeb 1.0.0.rc16-4.1ubuntu8 Oct 7 14:02:49 anna[12599]: DEBUG: retrieving libdmraid1.0.0.rc16-udeb 1.0.0.rc16-4.1ubuntu8 Oct 7 14:02:49 anna[12599]: DEBUG: retrieving kpartx-udeb 0.4.9-3ubuntu5 Oct 7 14:02:49 disk-detect: Serial ATA RAID disk(s) detected. Oct 7 14:02:55 disk-detect: Enabling dmraid support. Oct 7 14:02:55 disk-detect: RAID set "pdc_jhjbcaha" was activated Oct 7 14:02:55 HERE --> dmraid-activate: ERROR: Cannot retrieve RAID set information for pdc_jhjbcaha Oct 7 14:02:56 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Oct 7 14:02:56 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Oct 7 14:02:56 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing Oct 7 14:02:57 main-menu[428]: DEBUG: resolver (libnewt0.52): package doesn't exist (ignored) Oct 7 14:02:57 main-menu[428]: DEBUG: resolver (ext2-modules): package doesn't exist (ignored) Oct 7 14:02:57 main-menu[428]: INFO: Menu item 'partman-base' selected Oct 7 14:02:57 kernel: [ 316.512999] NTFS driver 2.1.30 [Flags: R/O MODULE]. Oct 7 14:02:57 kernel: [ 316.523221] Btrfs loaded Oct 7 14:02:57 kernel: [ 316.534781] JFS: nTxBlock = 8192, nTxLock = 65536 Oct 7 14:02:57 kernel: [ 316.554749] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled Oct 7 14:02:57 kernel: [ 316.555336] SGI XFS Quota Management subsystem Oct 7 14:02:58 md-devices: mdadm: No arrays found in config file or automatically Oct 7 14:02:58 partman: No matching physical volumes found Oct 7 14:02:58 partman: No volume groups found Oct 7 14:02:58 partman: Reading all physical volumes. This may take a while... Oct 7 14:02:58 partman-lvm: No volume groups found Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:06:11 HERE --> partman: mkswap: can't open '/dev/mapper/pdc_jhjbcaha2': No such file or directory Oct 7 14:07:28 init: starting pid 401, tty '/dev/tty2': '-/bin/sh' Oct 7 14:15:00 net/hw-detect.hotplug: Detected hotpluggable network interface eth0 Oct 7 14:15:00 net/hw-detect.hotplug: Detected hotpluggable network interface lo As You can see there are 2 errors Oct 7 14:02:55 dmraid-activate: ERROR: Cannot retrieve RAID set information for pdc_jhjbcaha and Oct 7 14:06:11 partman: mkswap: can't open '/dev/mapper/pdc_jhjbcaha2': No such file or directory I looked in the internet and try to run command "dmraid -ay" and get something like that: dmraid -ay /dev/mapper/pdc_jhjbcaha -> Already activated /dev/mapper/pdc_jhjbcaha1 -> Successfully activated /dev/mapper/pdc_jhjbcaha2 -> Successfully activated /dev/mapper/pdc_jhjbcaha3 -> Successfully activated /dev/mapper/pdc_jhjbcaha4 -> Successfully activated /dev/mapper/pdc_jhjbcaha5 -> Successfully activated /dev/mapper/pdc_jhjbcaha6 -> Successfully activated Then I returned to installer with Alt+F1 (?) and click "Return" to return to partitioning menu. I did NOT change anything just selected again "Continue" and everything goes smoothly. I hope this will help someone. arkadius

    Read the article

  • Will SQL Server Partitioning increase performance without changing filegroups

    - by Tom
    Scenario I have a 10 million row table. I partition it into 10 partitions, which results in 1 million rows per partition but I do not do anything else (like move the partitions to different file groups or spindles) Will I see a performance increase? Is this in effect like creating 10 smaller tables? If I have queries that perform key lookups or scans, will the performance increase as if they were operating against a much smaller table? I'm trying to understand how partitioning is different from just having a well indexed table, and where it can be used to improve performance. Would a better scenario be to move the old data (using partition switching) out of the primary table to a read only archive table? Is having a table with a 1 million row partition and a 9 million row partition analagous (performance wise) to moving the 9 million rows to another table and leaving only 1 million rows in the original table?

    Read the article

  • Database(Partitions) related query.... Please suggest..........

    - by AGeek
    The Query is as follows:- We have an oracle schema, with tables partitioned. -- Need to make one of the partition offline. (How to achieve this,, or have thought of assigning each partition, a different tablespace, and then making that tablespace offline) any other way out possible so as to avoid making so many tablespaces???? -- Then, copy the data files/ logs related to that partition to the temporary storage..... how to achieve this thing... any docs related to the same.... -- Then We make this partition / related tablespace online... -- Then we create a second schema with the same tables as above..... -- Copy the partition data from temporary storage to this table. (How this can be achieved,,, any specific doc??? -- Then verifying to the data is accessible in all respects..... If possible, let's discuss to find out the solution........ Thanks....

    Read the article

  • A way to use Python which I don't know

    - by Konie
    In this quicksort function: def qsort2(list): if list == []: return [] else: pivot = list[0] # can't understand the following line lesser, equal, greater = partition(list[1:], [], [pivot], []) return qsort2(lesser) + equal + qsort2(greater) def partition(list, l, e, g): if list == []: return (l, e, g) else: head = list[0] if head < e[0]: return partition(list[1:], l + [head], e, g) elif head > e[0]: return partition(list[1:], l, e, g + [head]) else: return partition(list[1:], l, e + [head], g) I don't understand the sentence below the comment. Can someone tell me what is the meaning of this sentence here?

    Read the article

  • How to fade away the icon in the dock when close the program in Mac OSX

    - by Magic
    I'm using Mac OSX Mountain Lion. But some program in the dock confusing me. When I close some program(upper left close button). The icon in the dock fade away. That mean the process close. But some program doesn't fade away(mean the process still alive), And I don't select the "Show in Dock" option. Like Microsoft Office(Word, Excel). It's too annoying. What I want is when I click the upper left close button. The icon will fade away and the program close?

    Read the article

  • How to send massive mail in Window [closed]

    - by Magic
    I'm looking for a solution that can send massive mail in Windows. I'm not spaming. My company want to send mail to our user. I don't want to use third party smtp server(like google mail). Because it'll ask captcha when sending several mail continuously. Please suggest me some solution. EDIT: I only want to send mail in Windows. Massive only means several hundreds mail per days. I just want to send our product information to our user.

    Read the article

  • SQL SERVER – OVER clause with FIRST _VALUE and LAST_VALUE – Analytic Functions Introduced in SQL Server 2012 – ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING

    - by pinaldave
    Yesterday I had discussed two analytical functions FIRST_VALUE and LAST_VALUE. After reading the blog post I received very interesting question. “Don’t you think there is bug in your first example where FIRST_VALUE is remain same but the LAST_VALUE is changing every line. I think the LAST_VALUE should be the highest value in the windows or set of result.” I find this question very interesting because this is very commonly made mistake. No there is no bug in the code. I think what we need is a bit more explanation. Let me attempt that first. Before you do that I suggest you read yesterday’s blog post as this question is related to that blog post. Now let’s have fun following query: USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (ORDER BY SalesOrderDetailID) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (ORDER BY SalesOrderDetailID) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO The above query will give us the following result: As per the reader’s question the value of the LAST_VALUE function should be always 114 and not increasing as the rows are increased. Let me re-write the above code once again with bit extra T-SQL Syntax. Please pay special attention to the ROW clause which I have added in the above syntax. USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO Now once again check the result of the above query. The result of both the query is same because in OVER clause the default ROWS selection is always UNBOUNDED PRECEDING AND CURRENT ROW. If you want the maximum value of the windows with OVER clause you need to change the syntax to UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING for ROW clause. Now run following query and pay special attention to ROW clause again. USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO Here is the resultset of the above query which is what questioner was asking. So in simple word, there is no bug but there is additional syntax needed to add to get your desired answer. The same logic also applies to PARTITION BY clause when used. Here is quick example of how we can further partition the query by SalesOrderDetailID with this new functions. USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO Above query will give us windowed resultset on SalesOrderDetailsID as well give us FIRST and LAST value for the windowed resultset. There are lots to discuss for this two functions and we have just explored tip of the iceberg. In future post I will discover it further deep. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Function, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >