Search Results

Search found 1687 results on 68 pages for 'portable harddrive'.

Page 63/68 | < Previous Page | 59 60 61 62 63 64 65 66 67 68  | Next Page >

• External usb 3.0 hard drive is not recognised when plugged into usb 3 port (ubuntu natty 64 bit).

  - by kimangroo

  I have an Iomega Prestige Portable External Hard Drive 1TB USB 3.0. It works fine on windows 7 as a usb 3.0 drive. It isn't detected on ubuntu natty 64bit, 2.6.38-8-generic. fdisk -l cannot see it at all: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1bed746b Device Boot Start End Blocks Id System /dev/sda1 1 1689 13560832 27 Unknown /dev/sda2 * 1689 1702 102400 7 HPFS/NTFS /dev/sda3 1702 19978 146805760 7 HPFS/NTFS /dev/sda4 19978 60802 327914497 5 Extended /dev/sda5 25555 60802 283120640 7 HPFS/NTFS /dev/sda6 19978 23909 31571968 83 Linux /dev/sda7 23909 25555 13218816 82 Linux swap / Solaris Partition table entries are not in disk order lsusb can see it: Bus 003 Device 003: ID 059b:0070 Iomega Corp. Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 004: ID 05fe:0011 Chic Technology Corp. Browser Mouse Bus 002 Device 003: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 0489:e00f Foxconn / Hon Hai Bus 001 Device 004: ID 0c45:64b5 Microdia Bus 001 Device 003: ID 08ff:168f AuthenTec, Inc. Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub And dmesg | grep -i xhci (I may have unplugged the drive and plugged it back in again after booting): [ 1.659060] pci 0000:04:00.0: xHCI HW did not halt within 2000 usec status = 0x0 [ 11.484971] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 11.484997] xhci_hcd 0000:04:00.0: setting latency timer to 64 [ 11.485002] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 11.485064] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 [ 11.636149] xhci_hcd 0000:04:00.0: irq 18, io mem 0xc5400000 [ 11.636241] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X [ 11.636246] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X [ 11.636251] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X [ 11.636256] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X [ 11.636261] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X [ 11.639654] xHCI xhci_add_endpoint called for root hub [ 11.639655] xHCI xhci_check_bandwidth called for root hub [ 11.956366] usb 3-1: new SuperSpeed USB device using xhci_hcd and address 2 [ 12.001073] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.007059] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.012932] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.018922] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.049139] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.056754] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.131607] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst [ 12.179717] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 12.686876] xhci_hcd 0000:04:00.0: WARN: babble error on endpoint [ 12.687058] xhci_hcd 0000:04:00.0: WARN Set TR Deq Ptr cmd invalid because of stream ID configuration [ 12.687152] xhci_hcd 0000:04:00.0: ERROR Transfer event for disabled endpoint or incorrect stream ring [ 43.330737] usb 3-1: reset SuperSpeed USB device using xhci_hcd and address 2 [ 43.422579] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 43.422658] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014669af00 [ 43.422665] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014669af40 [ 43.422671] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014669af80 [ 43.422677] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88014669afc0 [ 43.531159] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst [ 125.160248] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst [ 903.766466] usb 3-1: new SuperSpeed USB device using xhci_hcd and address 3 [ 903.807789] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.813530] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.819400] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.825104] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.855067] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.862314] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 903.862597] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst [ 903.913211] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 904.424416] xhci_hcd 0000:04:00.0: WARN: babble error on endpoint [ 904.424599] xhci_hcd 0000:04:00.0: WARN Set TR Deq Ptr cmd invalid because of stream ID configuration [ 904.424700] xhci_hcd 0000:04:00.0: ERROR Transfer event for disabled endpoint or incorrect stream ring [ 935.139021] usb 3-1: reset SuperSpeed USB device using xhci_hcd and address 3 [ 935.226075] xhci_hcd 0000:04:00.0: WARN: short transfer on control ep [ 935.226140] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880148186b00 [ 935.226148] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880148186b40 [ 935.226153] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880148186b80 [ 935.226159] xhci_hcd 0000:04:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880148186bc0 [ 935.343339] xhci_hcd 0000:04:00.0: WARN no SS endpoint bMaxBurst I thought it might be that the firmware wasn't compatible with linux or something, but when booting a live image of partedmagic, (2.6.38.4-pmagic), the drive was detected fine, I could mount it and got usb 3.0 speeds (at least they double the speeds I got from plugging same drive in usb 2 ports). dmesg in partedmagic did say something about no SuperSpeed endpoint which was an error I saw in a previous dmesg of ubuntu: Jun 27 15:49:02 (none) user.info kernel: [ 2.978743] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Jun 27 15:49:02 (none) user.debug kernel: [ 2.978771] xhci_hcd 0000:04:00.0: setting latency timer to 64 Jun 27 15:49:02 (none) user.info kernel: [ 2.978781] xhci_hcd 0000:04:00.0: xHCI Host Controller Jun 27 15:49:02 (none) user.info kernel: [ 2.978856] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3 Jun 27 15:49:02 (none) user.info kernel: [ 3.089458] xhci_hcd 0000:04:00.0: irq 18, io mem 0xc5400000 Jun 27 15:49:02 (none) user.debug kernel: [ 3.089541] xhci_hcd 0000:04:00.0: irq 42 for MSI/MSI-X Jun 27 15:49:02 (none) user.debug kernel: [ 3.089544] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X Jun 27 15:49:02 (none) user.debug kernel: [ 3.089546] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X Jun 27 15:49:02 (none) user.debug kernel: [ 3.089548] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X Jun 27 15:49:02 (none) user.debug kernel: [ 3.089550] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X Jun 27 15:49:02 (none) user.warn kernel: [ 3.092857] usb usb3: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values Jun 27 15:49:02 (none) user.info kernel: [ 3.092864] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003 Jun 27 15:49:02 (none) user.info kernel: [ 3.092866] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jun 27 15:49:02 (none) user.info kernel: [ 3.092867] usb usb3: Product: xHCI Host Controller Jun 27 15:49:02 (none) user.info kernel: [ 3.092869] usb usb3: Manufacturer: Linux 2.6.38.4-pmagic xhci_hcd Jun 27 15:49:02 (none) user.info kernel: [ 3.092870] usb usb3: SerialNumber: 0000:04:00.0 Jun 27 15:49:02 (none) user.debug kernel: [ 3.092961] xHCI xhci_add_endpoint called for root hub Jun 27 15:49:02 (none) user.debug kernel: [ 3.092963] xHCI xhci_check_bandwidth called for root hub Well I have no idea what's going wrong, and I haven't had much luck from google and the forums so far. A number of unanswered threads with people with similar error messages and problems only. Hopefully someone here can help or point me in the right direction?!

  Read the article

• Clustering for Mere Mortals (Pt 3)

  - by Geoff N. Hiten

  The Controller Now we get to the meat of the matter.  You want a virtual cluster, the first thing you have to do is create your own portable domain.  Start with a plain vanilla install of Windows 2003 R2 Standard on a semi-default VM. (1 GB RAM, 2 cores, 2 NICs, 128GB dynamically expanding VHD file).  I chose this because it had the smallest disk and memory footprint of any current supported Microsoft Server product.  I created the VM with a single dynamically expanding VHD, one fixed 16 GB VHD, and two NICs.  One NIC is connected to the outside world and the other one is part of an internal-only network.  The first NIC is set up as a DHCP client.  We will get to the other one later. I actually tried this with Windows 2008 R2, but it failed miserably.  Not sure whether it was 2008 R2 or the fact I tried to use cloned VMs in the cluster.  Clustering is one place where NewSID would really come in handy.  Too bad Microsoft bought and buried it. Load and Patch the OS (hence the need for the outside connection).This is a good time to go get dinner.  Maybe a movie too.  There are close to a hundred patches that need to be downloaded and applied.  Avoiding that mess was why I put so much time into trying to get the 2008 R2 version working.  Maybe next time.  Don’t forget to add the extensions for VMLite (or whatever virtualization product you prefer). Set a fixed IP address on the internal-only NIC.  Do not give it a gateway.  Put the same IP address for the NIC and for the DNS Server.  This IP should be in a range that is never available on your public network.  You will need all the addresses in the range available.  See the previous post for the exact settings I used. I chose 10.97.230.1 as the server.  The rest of the 10.97.230 range is what I will use later.  For the curious, those numbers are based on elements of my home address.  Not truly random, but good enough for this project. Do not bridge the network connections.  I never allowed the cluster nodes direct access to any public network. Format the fixed VHD and leave it alone for now. Promote the VM to a Domain Controller.  If you have never done this, don’t worry.  The only meaningful decision is what to call the new domain.  I prefer a bogus name that does not correspond to a real Top-Level Domain (TLD).  .com, .biz., .net, .org  are all TLDs that we know and love.  I chose .test as the TLD since it is descriptive AND it does not exist in the real world.  The domain is called MicroAD.  This gives me MicroAD.Test as my domain. During the promotion process, you will be prompted to install DNS as part of the Domain creation process.  You want to accept this option.  The installer will automatically assign this DNS server as the authoritative owner of the MicroAD.test DNS domain (not to be confused with the MicroAD.test Active Directory domain.) For the rest of the DCPROMO process, just accept the defaults. Now let’s make our IP address management easy.  Add the DHCP Role to the server.  Add the server (10.97.230.1 in this case) as the default gateway to assign to DHCP clients.  Here is where you have to be VERY careful and bind it ONLY to the Internal NIC.  Trust me, your network admin will NOT like an extra DHCP server “helping” out on her network.  Go ahead and create a range of 10-20 IP Addresses in your scope.  You might find other uses for a pocket domain controller <cough> Mirroring </cough> than just for building a cluster.  And Clustering in SQL 2008 and Windows 2008 R2 fully supports DHCP addresses. Now we have three of the five key roles ready.  Two more to go. Next comes file sharing.  Since your cluster node VMs will not have access to any outside, you have to have some way to get files into these VMs.  I simply go to the root of C: and create a “Shared” folder.  I then share it out and grant full control to “Everyone” to both the share and to the underlying NTFS folder.   This will be immensely useful for Service Packs, demo databases, and any other software that isn’t packaged as an ISO that we can mount to the VM. Finally we need to create a block-level multi-connect storage device.  The kind folks at Starwinds Software (http://www.starwindsoftware.com/) graciously gave me a non-expiring demo license for expressly this purpose.  Their iSCSI SAN software lets you create an iSCSI target from nearly any storage medium.  Refreshingly, their product does exactly what they say it does.  Thanks. Remember that 16 GB VHD file?  That is where we are going to carve into our LUNs.  I created an iSCSI folder off the root, just so I can keep everything organized.  I then carved 5 ea. 2 GB iSCSI targets from that folder.  I chose a fixed VHD for performance.  I tried this earlier with a dynamically expanding VHD, but too many layers of abstraction and sparseness combined to make it unusable even for a demo.  Stick with a fixed VHD so there is a one-to-one mapping between abstract and physical storage.  If you read the previous post, you know what I named these iSCSI LUNs and why.  Yes, I do have some left over space.  Always leave yourself room for future growth or options. This gets us up to where we can actually build the nodes and install SQL.  As with most clusters, the real work happens long before the individual nodes get installed and configured.  At least it does if you want the cluster to be a true high-availability platform.

  Read the article

• Clustering for Mere Mortals (Pt3)

  - by Geoff N. Hiten

  The Controller Now we get to the meat of the matter.  You want a virtual cluster, the first thing you have to do is create your own portable domain.  IStart with a plain vanilla install of Windows 2003 R2 Standard on a semi-default VM. (1 GB RAM, 2 cores, 2 NICs, 128GB dynamically expanding VHD file).  I chose this because it had the smallest disk and memory footprint of any current supported Microsoft Server product.  I created the VM with a single dynamically expanding VHD, one fixed 16 GB VHD, and two NICs.  One NIC is connected to the outside world and the other one is part of an internal-only network.  The first NIC is set up as a DHCP client.  We will get to the other one later. I actually tried this with Windows 2008 R2, but it failed miserably.  Not sure whether it was 2008 R2 or the fact I tried to use cloned VMs in the cluster.  Clustering is one place where NewSID would really come in handy.  Too bad Microsoft bought and buried it. Load and Patch the OS (hence the need for the outside connection).This is a good time to go get dinner.  Maybe a movie too.  There are close to a hundred patches that need to be downloaded and applied.  Avoiding that mess was why I put so much time into trying to get the 2008 R2 version working.  Maybe next time.  Don’t forget to add the extensions for VMLite (or whatever virtualization product you prefer). Set a fixed IP address on the internal-only NIC.  Do not give it a gateway.  Put the same IP address for the NIC and for the DNS Server.  This IP should be in a range that is never available on your public network.  You will need all the addresses in the range available.  See the previous post for the exact settings I used. I chose 10.97.230.1 as the server.  The rest of the 10.97.230 range is what I will use later.  For the curious, those numbers are based on elements of my home address.  Not truly random, but good enough for this project. Do not bridge the network connections.  I never allowed the cluster nodes direct access to any public network. Format the fixed VHD and leave it alone for now. Promote the VM to a Domain Controller.  If you have never done this, don’t worry.  The only meaningful decision is what to call the new domain.  I prefer a bogus name that does not correspond to a real Top-Level Domain (TLD).  .com, .biz., .net, .org  are all TLDs that we know and love.  I chose .test as the TLD since it is descriptive AND it does not exist in the real world.  The domain is called MicroAD.  This gives me MicroAD.Test as my domain. During the promotion process, you will be prompted to install DNS as part of the Domain creation process.  You want to accept this option.  The installer will automatically assign this DNS server as the authoritative owner of the MicroAD.test DNS domain (not to be confused with the MicroAD.test Active Directory domain.) For the rest of the DCPROMO process, just accept the defaults. Now let’s make our IP address management easy.  Add the DHCP Role to the server.  Add the server (10.97.230.1 in this case) as the default gateway to assign to DHCP clients.  Here is where you have to be VERY careful and bind it ONLY to the Internal NIC.  Trust me, your network admin will NOT like an extra DHCP server “helping” out on her network.  Go ahead and create a range of 10-20 IP Addresses in your scope.  You might find other uses for a pocket domain controller <cough> Mirroring </cough> than just for building a cluster.  And Clustering in SQL 2008 and Windows 2008 R2 fully supports DHCP addresses. Now we have three of the five key roles ready.  Two more to go. Next comes file sharing.  Since your cluster node VMs will not have access to any outside, you have to have some way to get files into these VMs.  I simply go to the root of C: and create a “Shared” folder.  I then share it out and grant full control to “Everyone” to both the share and to the underlying NTFS folder.   This will be immensely useful for Service Packs, demo databases, and any other software that isn’t packaged as an ISO that we can mount to the VM. Finally we need to create a block-level multi-connect storage device.  The kind folks at Starwinds Software (http://www.starwindsoftware.com/) graciously gave me a non-expiring demo license for expressly this purpose.  Their iSCSI SAN software lets you create an iSCSI target from nearly any storage medium.  Refreshingly, their product does exactly what they say it does.  Thanks. Remember that 16 GB VHD file?  That is where we are going to carve into our LUNs.  I created an iSCSI folder off the root, just so I can keep everything organized.  I then carved 5 ea. 2 GB iSCSI targets from that folder.  I chose a fixed VHD for performance.  I tried this earlier with a dynamically expanding VHD, but too many layers of abstraction and sparseness combined to make it unusable even for a demo.  Stick with a fixed VHD so there is a one-to-one mapping between abstract and physical storage.  If you read the previous post, you know what I named these iSCSI LUNs and why.  Yes, I do have some left over space.  Always leave yourself room for future growth or options. This gets us up to where we can actually build the nodes and install SQL.  As with most clusters, the real work happens long before the individual nodes get installed and configured.  At least it does if you want the cluster to be a true high-availability platform.

  Read the article

• Anatomy of a .NET Assembly - PE Headers

  - by Simon Cooper

  Today, I'll be starting a look at what exactly is inside a .NET assembly - how the metadata and IL is stored, how Windows knows how to load it, and what all those bytes are actually doing. First of all, we need to understand the PE file format. PE files .NET assemblies are built on top of the PE (Portable Executable) file format that is used for all Windows executables and dlls, which itself is built on top of the MSDOS executable file format. The reason for this is that when .NET 1 was released, it wasn't a built-in part of the operating system like it is nowadays. Prior to Windows XP, .NET executables had to load like any other executable, had to execute native code to start the CLR to read & execute the rest of the file. However, starting with Windows XP, the operating system loader knows natively how to deal with .NET assemblies, rendering most of this legacy code & structure unnecessary. It still is part of the spec, and so is part of every .NET assembly. The result of this is that there are a lot of structure values in the assembly that simply aren't meaningful in a .NET assembly, as they refer to features that aren't needed. These are either set to zero or to certain pre-defined values, specified in the CLR spec. There are also several fields that specify the size of other datastructures in the file, which I will generally be glossing over in this initial post. Structure of a PE file Most of a PE file is split up into separate sections; each section stores different types of data. For instance, the .text section stores all the executable code; .rsrc stores unmanaged resources, .debug contains debugging information, and so on. Each section has a section header associated with it; this specifies whether the section is executable, read-only or read/write, whether it can be cached... When an exe or dll is loaded, each section can be mapped into a different location in memory as the OS loader sees fit. In order to reliably address a particular location within a file, most file offsets are specified using a Relative Virtual Address (RVA). This specifies the offset from the start of each section, rather than the offset within the executable file on disk, so the various sections can be moved around in memory without breaking anything. The mapping from RVA to file offset is done using the section headers, which specify the range of RVAs which are valid within that section. For example, if the .rsrc section header specifies that the base RVA is 0x4000, and the section starts at file offset 0xa00, then an RVA of 0x401d (offset 0x1d within the .rsrc section) corresponds to a file offset of 0xa1d. Because each section has its own base RVA, each valid RVA has a one-to-one mapping with a particular file offset. PE headers As I said above, most of the header information isn't relevant to .NET assemblies. To help show what's going on, I've created a diagram identifying all the various parts of the first 512 bytes of a .NET executable assembly. I've highlighted the relevant bytes that I will refer to in this post: Bear in mind that all numbers are stored in the assembly in little-endian format; the hex number 0x0123 will appear as 23 01 in the diagram. The first 64 bytes of every file is the DOS header. This starts with the magic number 'MZ' (0x4D, 0x5A in hex), identifying this file as an executable file of some sort (an .exe or .dll). Most of the rest of this header is zeroed out. The important part of this header is at offset 0x3C - this contains the file offset of the PE signature (0x80). Between the DOS header & PE signature is the DOS stub - this is a stub program that simply prints out 'This program cannot be run in DOS mode.\r\n' to the console. I will be having a closer look at this stub later on. The PE signature starts at offset 0x80, with the magic number 'PE\0\0' (0x50, 0x45, 0x00, 0x00), identifying this file as a PE executable, followed by the PE file header (also known as the COFF header). The relevant field in this header is in the last two bytes, and it specifies whether the file is an executable or a dll; bit 0x2000 is set for a dll. Next up is the PE standard fields, which start with a magic number of 0x010b for x86 and AnyCPU assemblies, and 0x20b for x64 assemblies. Most of the rest of the fields are to do with the CLR loader stub, which I will be covering in a later post. After the PE standard fields comes the NT-specific fields; again, most of these are not relevant for .NET assemblies. The one that is is the highlighted Subsystem field, and specifies if this is a GUI or console app - 0x20 for a GUI app, 0x30 for a console app. Data directories & section headers After the PE and COFF headers come the data directories; each directory specifies the RVA (first 4 bytes) and size (next 4 bytes) of various important parts of the executable. The only relevant ones are the 2nd (Import table), 13th (Import Address table), and 15th (CLI header). The Import and Import Address table are only used by the startup stub, so we will look at those later on. The 15th points to the CLI header, where the CLR-specific metadata begins. After the data directories comes the section headers; one for each section in the file. Each header starts with the section's ASCII name, null-padded to 8 bytes. Again, most of each header is irrelevant, but I've highlighted the base RVA and file offset in each header. In the diagram, you can see the following sections: .text: base RVA 0x2000, file offset 0x200 .rsrc: base RVA 0x4000, file offset 0xa00 .reloc: base RVA 0x6000, file offset 0x1000 The .text section contains all the CLR metadata and code, and so is by far the largest in .NET assemblies. The .rsrc section contains the data you see in the Details page in the right-click file properties page, but is otherwise unused. The .reloc section contains address relocations, which we will look at when we study the CLR startup stub. What about the CLR? As you can see, most of the first 512 bytes of an assembly are largely irrelevant to the CLR, and only a few bytes specify needed things like the bitness (AnyCPU/x86 or x64), whether this is an exe or dll, and the type of app this is. There are some bytes that I haven't covered that affect the layout of the file (eg. the file alignment, which determines where in a file each section can start). These values are pretty much constant in most .NET assemblies, and don't affect the CLR data directly. Conclusion To summarize, the important data in the first 512 bytes of a file is: DOS header. This contains a pointer to the PE signature. DOS stub, which we'll be looking at in a later post. PE signature PE file header (aka COFF header). This specifies whether the file is an exe or a dll. PE standard fields. This specifies whether the file is AnyCPU/32bit or 64bit. PE NT-specific fields. This specifies what type of app this is, if it is an app. Data directories. The 15th entry (at offset 0x168) contains the RVA and size of the CLI header inside the .text section. Section headers. These are used to map between RVA and file offset. The important one is .text, which is where all the CLR data is stored. In my next post, we'll start looking at the metadata used by the CLR directly, which is all inside the .text section.

  Read the article

• CodePlex Daily Summary for Tuesday, November 29, 2011

  CodePlex Daily Summary for Tuesday, November 29, 2011Popular ReleasesMFCMAPI: November 2011 Release: Build: 15.0.0.1029 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeWCF Community Site: WCF Web API Preview 6: Welcome to the sixth preview release of WCF Web API on Codeplex! Install WCF Web API Preview 6 using NuGet New Features/EnhancementsURL form encoding - Http request bodies sent as application/x-www-form-urlencoded can now deserialize into objects and participate in content negotiation. Custom OData entity keys - The ODataFormatter now supports custom conventions for determining which properties identify an entity key. [ServiceContract] is no longer required on the Web API class definiti...Devpad: 4.11: Whats new for Devpad 4.11: New Import Archive Improved Save Dialog Improved Replace Dialog Improved Go To Dialog Minor Bug Fix's, improvements and speed upsSubExtractor: Release 1021: Feature: Allow OcrMap.bin file to be placed in same directory as EXE Feature: Choose Subtitle dialog directory remembered while app is up Feature: Allow Save As when creating Subtitle files (initial directory is remembered) Feature: Allow resizing of all main window dialogs Fix: Issue Id #682 (Dynamically generating the expected baseline and top offsets for characters. This fixes the problem of manually entered characters not in character selector incorrectly being put on a different line or...Home Access Plus+: v7.7: v7.7.1128.2200Added: ShowTo Option on Resources Added: Basic Authentication Logon Method Added: Button on the Live Tracker page to clear logons in the database but not do a remote logoff Updated: jquery from v1.6.2 to v1.7.1 Fixed: Another attempt at fixing the SIMS import in the booking system Fixed: JSON Issues with the Setup Added: More DEBUG Events to the Event Log (note DEBUG not RELEASE) Added: Support for Week A Week B instead of Week 1 and Week 2 Updated: The My Files ...Diagnostics Tool for Microsoft Dynamics CRM 2011: CrmDiagTool2011 (5.1.27.82): NEW FEATURE: DevErrors flag is now accessible for remote server (need to be local admin to access web.config file through administrative share)CommonLibrary.NET: CommonLibrary.NET 0.9.8 - Alpha: A collection of very reusable code and components in C# 4.0 ranging from ActiveRecord, Csv, Command Line Parsing, Configuration, Holiday Calendars, Logging, Authentication, and much more. Samples in <root>\src\Lib\CommonLibrary.NET\Samples CommonLibrary.NET 0.9.8 AlphaNew Dynamic Scripting Language : workitem : 7493 Fixes 1622 6803Widget Suite for DotNetNuke: 01.04.00: The following features/enhancements are associated with this release: Bug: Removed the empty box/white space created by some widgets New Widget: FlexSlider New Widget: Google+ Button New Widget: Klout Badge Sample Widget Script FileFxCop Integrator for Visual Studio 2010: FxCop Integrator 2.0.0 RC: Replaced the MSBuild Tasks installer to fix the bug of the targets file. FxCop Integrator is not affected by this bug. (Nov 28 2011) New FeatureSupported calculating code metrics with Code Metrics PowerTool. (Work Item #6568: 6568). Provided MSBuild tasks. #7454: 7454 Supported to filter out auto-generated code from code analysis result. #7485: 7485 Supported exporting report of code analysis result. Supported multi-project analysis. Supported file level analysis. Added the featu...Terminals: Version 2 - Beta 4 Release: Beta 4 Refresh Build Dont forget to backup your config files BEFORE upgrading! As usual, please take time to use and abuse this release. We left logging in place, and this is a debug build so be sure to submit your logs on each bug reported, and please do report all bugs! Updated the About form to include the date and time of the build. Useful for CI builds to ensure we have the correct version "Favourites" and "History" save their expanded states after app restarts Code cleanup, secu...MiniTwitter: 1.76: MiniTwitter 1.76 ???? ?? ?????????? User Streams ???????????? User Streams ???????????、??????????????? REST ?????????? ?????????????????????????????? ??????????????????????????????Media Companion: MC 3.424b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Movie Show Resolutions... Resolved issue when reverting multiselection of movies to "-none-" Added movie rename support for subtitle files '.srt' & '.sub' Finalised code for '-1' fix - radiobutton to choose either filename or title Fixed issue with Movie Batch Wizard Fanart - ...Advanced Windows Phone Enginering Tool: WPE Downloads: This version of WPE gives you basic updating, restoring, and, erasing for your Windows Phone device.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.37: Fix for issue #16936 - CSS strings containing ASP.NET replacement blocks that contain the same delimiter character(s) as the CSS string cause the CSS parser to barf. Need to use the -aspnet:1 flag to treat the ASP.NET blocks as single entities. Added support for CSS3 @keyframes syntax. Added NuGet package support to the DLL project. Expand the -line switch to also optionally specify the multiline/single line mode, and the spaces-per-tab for multiline mode. Tweak the -pretty switch to be more ...Anno 2070 Assistant: Beta v1.0 (STABLE): Anno 2070 Assistant Beta v1.0 Released! Features Included: Complete Building Layouts for Ecos, Tycoons & Techs Complete Production Chains for Ecos, Tycoons & Techs Completed Credits Screen Known Issues: Not all production chains and building layouts may be on the lists because they have not yet been discovered. However, data is still 99.9% complete. Currently the Supply & Demand, including Calculator screen are disabled until version 1.1.Oil Prices: Oil Prices V1.1: Oil Prices V1.1 Fix Bangchak price listTAXILISM: TAXILISM V1.0: TAXILISMExamine: v1.4 - Beta: A fairly mega release which borrows some behaviors from the currently under development v2.0 version, this means there are some breaking changes which are listed below, though I don't think these breaking changes will affect many. FeaturesUpgraded DLLs to .Net 4.0 runtime Azure support No more file queue, all asynchronous operations are handled by .Net 4.0's async Task scheduling system, this not only increases performance but better handles async operations. Running in async mode will...Minemapper: Minemapper v0.1.7: Including updated Minecraft Biome Extractor and mcmap to support the new Minecraft 1.0.0 release (new block types, etc).Visual Leak Detector for Visual C++ 2008/2010: v2.2.1: Enhancements: * strdup and _wcsdup functions support added. * Preliminary support for VS 11 added. Bugs Fixed: * Low performance after upgrading from VLD v2.1. * Memory leaks with static linking fixed (disabled calloc support). * Runtime error R6002 fixed because of wrong memory dump format. * version.h fixed in installer. * Some PVS studio warning fixed.New Projects.NET WindowsCe MVP Framework: .NET WindowsCe MVP Framework for .NET Compact Framework 2 or higherAndaman Alumini: AluminiSite for andaman studentsAudio Macro Recorder Plugin for Notepad++: kkkkCassandra .Net Provider: Cassandra .Net Provider is a project created to help .Net developers to start to work with Apache Cassandra. Under Cassandra .Net Provider project developers will find a client fully configurable, working with polled connection, where CQL commands can be executed.Code samples for deepcode.co.uk: Code samples to support articles posted on www.deepcode.co.ukContador de Caracteres: Contador de caracteres para Windows Phone 7Data Ductus Utilities: Simple utilities that other may find useful like mongo DataContract mapping etc.dIRC: dIRC is a cutting-edge .Net IRC client library written in C#.Distributed Blackboard: Distributed virtual drawing canvasFileSplit: FileSplit lets you split large files into smaller files for easier sharing and backup. After splitting the files, FileSplit also creates a .bat (batch) file that when clicked, automatically joins the split files into the original file. This is especially useful for those recipients who are not computer saavy.FlagSync: FlagSync is a synchronization and backup tool, which allows you to synchronize or backup your files with local folders (or an extern harddrive or flashdrive) and FTP-Servers, as well as synchronize your non-iPod MP3-Player with iTunes.Fodda: A small utility for downloading pictures and movies from Canon cameras to your computer. The transferred pictures and movies are placed in a directory structure based on the date of creation. E.g. My Pictures\2011\11\27_11_2011. It will probably work equally well with Cameras from other manufacturers.Google Authenticator TOTP C#: An implementation of Google's Authenticator in C# and WPF. It's a Time-based One-time Password (TOTP) described in RFC 6238. You could use it to implement two-factor authentication in your own .Net application.gppfree: gpp freeiOSApps: A collection of iOS appsLineSeriesDemo: LineSeriesDemolospacos23: klk NHash: This is a simple project that integrates with Explorer and Computes MD5 and SHA1.OpenGL Engine: Projekt pisany na projekt zespolowy.PolarConverter: Adjust the measured distance of HRM files created by Polar Heart Rate monitorsRASSUS - Sustav za dijeljenje fotografija: Sustav za dijeljenje fotografija - projekt studenata na fakultetu elektrotehnike i racunarstva.Space Monopoly: Space monopoly is the freeware game of buying and selling shares.StarCraft 2 ladder tiles for Windows Phone 7: StarCraft 2 ladder tiles for Windows Phone 7Validador de CPF/CNPJ: Validador Lógico de CPF ou CNPJ para Windows Phonever2web: Ver2web is an online Club management software developed for the course Webprogramming at Technikum Wien. It is programmed in C# using ASP.net MVC 3, Entity Framework 4.x and Unity 2.2. WPF Wizard Control: WPF user control (not a custom control) for generically hosting multiple-step wizards. Uses MVVM, you create the model and view for each step and optionally configure steps that guide the wizard along a different workflow.yankee-private-project: ??????????，????！

  Read the article

• Partner Blog Series: PwC Perspectives - "Is It Time for an Upgrade?"

  - by Tanu Sood

  Is your organization debating their next step with regard to Identity Management? While all the stakeholders are well aware that the one-size-fits-all doesn’t apply to identity management, just as true is the fact that no two identity management implementations are alike. Oracle’s recent release of Identity Governance Suite 11g Release 2 has innovative features such as a customizable user interface, shopping cart style request catalog and more. However, only a close look at the use cases can help you determine if and when an upgrade to the latest R2 release makes sense for your organization. This post will describe a few of the situations that PwC has helped our clients work through. “Should I be considering an upgrade?” If your organization has an existing identity management implementation, the questions below are a good start to assessing your current solution to see if you need to begin planning for an upgrade: Does the current solution scale and meet your projected identity management needs? Does the current solution have a customer-friendly user interface? Are you completely meeting your compliance objectives? Are you still using spreadsheets? Does the current solution have the features you need? Is your total cost of ownership in line with well-performing similar sized companies in your industry? Can your organization support your existing Identity solution? Is your current product based solution well positioned to support your organization's tactical and strategic direction? Existing Oracle IDM Customers: Several existing Oracle clients are looking to move to R2 in 2013. If your organization is on Sun Identity Manager (SIM) or Oracle Identity Manager (OIM) and if your current assessment suggests that you need to upgrade, you should strongly consider OIM 11gR2. Oracle provides upgrade paths to Oracle Identity Manager 11gR2 from SIM 7.x / 8.x as well as Oracle Identity Manager 10g / 11gR1. The following are some of the considerations for migration: Check the end of product support (for Sun or legacy OIM) schedule There are several new features available in R2 (including common Helpdesk scenarios, profiling of disconnected applications, increased scalability, custom connectors, browser-based UI configurations, portability of configurations during future upgrades, etc) Cost of ownership (for SIM customers)\ Customizations that need to be maintained during the upgrade Time/Cost to migrate now vs. waiting for next version If you are already on an older version of Oracle Identity Manager and actively maintaining your support contract with Oracle, you might be eligible for a free upgrade to OIM 11gR2. Check with your Oracle sales rep for more details. Existing IDM infrastructure in place: In the past year and half, we have seen a surge in IDM upgrades from non-Oracle infrastructure to Oracle. If your organization is looking to improve the end-user experience related to identity management functions, the shopping cart style access request model and browser based personalization features may come in handy. Additionally, organizations that have a large number of applications that include ecommerce, LDAP stores, databases, UNIX systems, mainframes as well as a high frequency of user identity changes and access requests will value the high scalability of the OIM reconciliation and provisioning engine. Furthermore, we have seen our clients like OIM's out of the box (OOB) support for multiple authoritative sources. For organizations looking to integrate applications that do not have an exposed API, the Generic Technology Connector framework supported by OIM will be helpful in quickly generating custom connector using OOB wizard. Similarly, organizations in need of not only flexible on-boarding of disconnected applications but also strict access management to these applications using approval flows will find the flexible disconnected application profiling feature an extremely useful tool that provides a high degree of time savings. Organizations looking to develop custom connectors for home grown or industry specific applications will likewise find that the Identity Connector Framework support in OIM allows them to build and test a custom connector independently before integrating it with OIM. Lastly, most of our clients considering an upgrade to OIM 11gR2 have also expressed interest in the browser based configuration feature that allows an administrator to quickly customize the user interface without adding any custom code. Better yet, code customizations, if any, made to the product are portable across the future upgrades which, is viewed as a big time and money saver by most of our clients. Below are some upgrade methodologies we adopt based on client priorities and the scale of implementation. For illustration purposes, we have assumed that the client is currently on Oracle Waveset (formerly Sun Identity Manager).   Integrated Deployment: The integrated deployment is typically where a client wants to split the implementation to where their current IDM is continuing to handle the front end workflows and OIM takes over the back office operations incrementally. Once all the back office operations are moved completely to OIM, the front end workflows are migrated to OIM. Parallel Deployment: This deployment is typically done where there can be a distinct line drawn between which functionality the platforms are supporting. For example the current IDM implementation is handling the password reset functionality while OIM takes over the access provisioning and RBAC functions. Cutover Deployment: A cutover deployment is typically recommended where a client has smaller less complex implementations and it makes sense to leverage the migration tools to move them over immediately. What does this mean for YOU? There are many variables to consider when making upgrade decisions. For most customers, there is no ‘easy’ button. Organizations looking to upgrade or considering a new vendor should start by doing a mapping of their requirements with product features. The recommended approach is to take stock of both the short term and long term objectives, understand product features, future roadmap, maturity and level of commitment from the R&D and build the implementation plan accordingly. As we said, in the beginning, there is no one-size-fits-all with Identity Management. So, arm yourself with the knowledge, engage in industry discussions, bring in business stakeholders and start building your implementation roadmap. In the next post we will discuss the best practices on R2 implementations. We will be covering the Do's and Don't's and share our thoughts on making implementations successful. Meet the Writers: Dharma Padala is a Director in the Advisory Security practice within PwC.  He has been implementing medium to large scale Identity Management solutions across multiple industries including utility, health care, entertainment, retail and financial sectors.   Dharma has 14 years of experience in delivering IT solutions out of which he has been implementing Identity Management solutions for the past 8 years. Scott MacDonald is a Director in the Advisory Security practice within PwC.  He has consulted for several clients across multiple industries including financial services, health care, automotive and retail.   Scott has 10 years of experience in delivering Identity Management solutions. John Misczak is a member of the Advisory Security practice within PwC.  He has experience implementing multiple Identity and Access Management solutions, specializing in Oracle Identity Manager and Business Process Engineering Language (BPEL). Praveen Krishna is a Manager in the Advisory Security practice within PwC.  Over the last decade Praveen has helped clients plan, architect and implement Oracle identity solutions across diverse industries.  His experience includes delivering security across diverse topics like network, infrastructure, application and data where he brings a holistic point of view to problem solving. Jenny (Xiao) Zhang is a member of the Advisory Security practice within PwC.  She has consulted across multiple industries including financial services, entertainment and retail. Jenny has three years of experience in delivering IT solutions out of which she has been implementing Identity Management solutions for the past one and a half years.

  Read the article

• CodePlex Daily Summary for Wednesday, March 14, 2012

  CodePlex Daily Summary for Wednesday, March 14, 2012Popular ReleasesAcDown????? - Anime&Comic Downloader: AcDown????? v3.9.2: ?? ●AcDown??????????、??、??????，????1M，????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。??????AcPlay?????，??????、????????????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)，?????"?????????"??? ??????????????，??????????： ??"AcDo...C.B.R. : Comic Book Reader: CBR 0.6: 20 Issue trackers are closed and a lot of bugs too Localize view is now MVVM and delete is working. Added the unused flag (take care that it goes to true only when displaying screen elements) Backstage - new input/output format choice control for the conversion Backstage - Add display, behaviour and register file type options in the extended options dialog Explorer list view has been transformed to a custom control. New group header, colunms order and size are saved Single insta...Windows Azure Toolkit for Windows 8: Windows Azure Toolkit for Windows 8 Consumer Prv: Windows Azure Toolkit for Windows 8 Consumer Preview - Preview Release v 1.2.0 Please download this for Windows Azure Toolkit for Windows 8 functionality on Windows 8 Consumer Preview. The core features of the toolkit include: Automated Install – Scripted install of all dependencies including Visual Studio 2010 Express and the Windows Azure SDK on Windows 8 Consumer Preview. Project Templates – Windows 8 Metro Style app project templates in Dev 11 in both XAML/C# and HTML5/JS with a suppor...CODE Framework: 4.0.20312.0: This version includes significant improvements in the WPF system (and the WPF MVVM/MVC system). This includes new styles for Metro controls and layouts. Improved color handling. It also includes an improved theme/style swapping engine down to active (open) views. There also are various other enhancements and small fixes throughout the entire framework.Visual Studio ALM Quick Reference Guidance: v3 - For Visual Studio 11: RELEASE README Welcome to the BETA release of the Quick Reference Guide preview As this is a BETA release and the quality bar for the final Release has not been achieved, we value your candid feedback and recommend that you do not use or deploy these BETA artifacts in a production environment. Quality-Bar Details Documentation has been reviewed by Visual Studio ALM Rangers Documentation has not been through an independent technical review Documentation ...AvalonDock: AvalonDock 2.0.0345: Welcome to early alpha release of AvalonDock 2.0 I've completely rewritten AvalonDock in order to take full advantage of the MVVM pattern. New version also boost a lot of new features: 1) Deep separation between model and layout. 2) Full WPF binding support thanks to unified logical tree between main docking manager, auto-hide windows and floating windows. 3) Support for Aero semi-maximized windows feature. 4) Support for multiple panes in the same floating windows. For a short list of new f...Google Books Downloader for Windows: Google Books Downloader-1.9.0.0.: Google Books DownloaderWindows Azure PowerShell Cmdlets: Windows Azure PowerShell Cmdlets 2.2.2: Changes Added Start Menu Item for Easy Startup Added Link to Getting Started Document Added Ability to Persist Subscription Data to Disk Fixed Get-Deployment to not throw on empty slot Simplified numerous default values for cmdlets Breaking Changes: -SubscriptionName is now mandatory in Set-Subscription. -DefaultStorageAccountName and -DefaultStorageAccountKey parameters were removed from Set-Subscription. Instead, when adding multiple accounts to a subscription, each one needs to be added ...IronPython: 2.7.2.1: On behalf of the IronPython team, I'm happy to announce the final release IronPython 2.7.2. This release includes everything from IronPython 54498 and 62475 as well. Like all IronPython 2.7-series releases, .NET 4 is required to install it. Installing this release will replace any existing IronPython 2.7-series installation. Unlike previous releases, the assemblies for all supported platforms are included in the installer as well as the zip package, in the "Platforms" directory. IronPython 2...Kooboo CMS: Kooboo CMS 3.2.0.0: Breaking changes: When upgrade from previous versions, MUST reset the all the content type templates, otherwise the content manager might get a compile error. New features Integrate with Windows azure. See: http://wiki.kooboo.com/?wiki=Kooboo CMS on Azure Complete solution to deploy on load balance servers. See: http://wiki.kooboo.com/?wiki=Kooboo CMS load balance Update Jquery and Jquery ui to the lastest version(Jquery 1.71, Jquery UI 1.8.16). Tree style text content editing. See:h...Home Access Plus+: v7.10: Don't forget to add your location to the list: http://www.nbdev.co.uk/projects/hap/locations.aspx Changes: Added: CompressJS controls to the Help Desk & Booking System (reduces page size) Fixed: Debug/Release mode detection in CompressJS control Added: Older Browsers will use an iframe and the old uploadh.aspx page (works better than the current implementation on older browsers) Added: Permalinks for my files, you can give out links that redirect to the correct location when you log i...SubExtractor: Release 1026: Fix: multi-colored bluray subs will no longer result in black blob for OCR Fix: dvds with no language specified will not cause exception in name creation of subtitle files Fix: Root directory Dvds will use volume label as their directory nameExtensions for Reactive Extensions (Rxx): Rxx 1.3: Please read the latest release notes for details about what's new. Related Work Items Content SummaryRxx provides the following features. See the Documentation for details. Many IObservable<T> extension methods and IEnumerable<T> extension methods. Many wrappers that convert asynchronous Framework Class Library APIs into observables. Many useful types such as ListSubject<T>, DictionarySubject<T>, CommandSubject, ViewModel, ObservableDynamicObject, Either<TLeft, TRight>, Maybe<T>, Scala...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.47: Properly output escaped characters in CSS identifiers throw an EOF error when parsing a CSS selector that doesn't end in a declaration block chased down a stack-overflow issue with really large JS sources. Needed to flatten out the AST tree for adjacent expression statements that the application merges into a single expression statement, or that already contain large, comma-separated expressions in the original source. fix issue #17569: tie together the -debug switch with the DEBUG defi...Player Framework by Microsoft: Player Framework for Windows 8 Metro (Preview): Player Framework for HTML/JavaScript and XAML/C# Metro Style Applications. Additional DownloadsIIS Smooth Streaming Client SDK for Windows 8WPF Application Framework (WAF): WAF for .NET 4.5 (Experimental): Version: 2.5.0.440 (Experimental): This is an experimental release! It can be used to investigate the new .NET Framework 4.5 features. The ideas shown in this release might come in a future release (after 2.5) of the WPF Application Framework (WAF). More information can be found in this dicussion post. Requirements .NET Framework 4.5 (The package contains a solution file for Visual Studio 11) The unit test projects require Visual Studio 11 Professional Changelog All: Upgrade all proje...SSH.NET Library: 2012.3.9: There are still few outstanding issues I wanted to include in this release but since its been a while and there are few new features already I decided to create a new release now. New Features Add SOCKS4, SOCKS5 and HTTP Proxy support when connecting to remote server. For silverlight only IP address can be used for server address when using proxy. Add dynamic port forwarding support using ForwardedPortDynamic class. Add new ShellStream class to work with SSH Shell. Add supports for mu...Test Case Import Utilities for Visual Studio 2010 and Visual Studio 11 Beta: V1.2 RTM: This release (V1.2 RTM) includes: Support for connecting to Hosted Team Foundation Server Preview. Support for connecting to Team Foundation Server 11 Beta. Fix to issue with read-only attribute being set for LinksMapping-ReportFile which may have led to problems when saving the report file. Fix to issue with “related links” not being set properly in certain conditions. Fix to ensure that tool works fine when the Excel file contained rich text data. Note: Data is still imported in pl...DotNetNuke® Community Edition CMS: 06.01.04: Major Highlights Fixed issue with loading the splash page skin in the login, privacy and terms of use pages Fixed issue when searching for words with special characters in them Fixed redirection issue when the user does not have permissions to access a resource Fixed issue when clearing the cache using the ClearHostCache() function Fixed issue when displaying the site structure in the link to page feature Fixed issue when inline editing the title of modules Fixed issue with ...Mayhem: Mayhem Developer Preview: This is the developer preview of Mayhem. Enjoy! If you are looking for the Phone applications, please visit this discussionNew ProjectsAD Test Tool: After trying to figure out replication and other user-based issues with a local domain system we built this simple tool to test what the directory was currently reflecting for each user who accessed the tool.BuildUp: MSBuild scripts for use with CI servers.CDRtoSQL: CDRtoSQLCloudStorage4Net: A set of C# wrapper used to access cloud storage services. Such aliyun, grandcloud, baiduyun etc. The project is created to generalize the interfaces of difference storeage platform. We expect programmers could use all these cloud storage in a uniform way. D.E.M.O.N MySQL Tweaker: D.E.M.O.N Studio MySQL Tweaker, a fast and easy-to-use Mysql tools. Add this to your project, install , start, and stop mysql service with a little coding work. Love MySQL , Love MySQL TweakerEarth2012: Earth2012 shows the possible 31 events of 2012 according to the research at www.heliwave.com. For each event, the Earth map shows the danger latitude and all danger and semi-danger cities around it. The user can adjust the starting date of the events once we see a 4-day event.fjyc documents: this is a documentation share for fjyc projectFolderDrive: FolderDrive is a small tool that turns your folders into drives. Imagine having your Dropbox folder behaving as the (almost real) harddrive. It's another handy solution in the ongoing quest for quick access to your favorite folders. The project is developed in C# using WPF - you'll need .NET framework 4 to use it.GralicNew: dHarness: Harness is Web Browser Automation Framework. implemented as COM (Common Object Library) Harness will automate the testing of Web applications by automatic operation the Internet Explorer. you can easily use from your favorite development language.IIS2SQL: Powershell script for IIS7.5 that will send IIS logs to an MSSQL database. Separate table is used to keep track of when the last update occurred so only new events are inserted. Writes to the Application log status messages.Inside Sales Api Client: InsideSales.com api client. Current valid operations are Login and AddLead only. Developed in C#, .NET Framework 4.jqGrid Helper Library: This library is intended for use with the jqGrid jQuery plugin. It provides classes for handling grid settings, building filter and order by expressions, and will build a JQGrid object and then serialize it to either JSON or XML. longSudoku: A simple sudoku game! Use WinForm development! Imitate Metro UI!MantisWare Proxy Switcher: This is a small application that runs in your task bar and gives you the capability to add a proxy list and switch between them quickly, either by selecting the appropriate proxy or using the shortcut keys. It's developed in C#.net, MSSQL Compact.Map Wisata: Map , Dotspatial , Ribbon, Visual Basic.Netmapabc?? API WP SDK: mapabc?? API WP SDKNetWinsock: Provides a simple, event-driven Windows Forms Component capable of serving as a TCP client or server. Utilizes an asynchronous/multithreaded pattern and raises data reception and error events on the UI thread for easy processing. Reminiscent of the VB6 Winsock control.Orchard Zencoder: Orchard module that enables usage of zencoder for encoding media files. http://zencoder.comPleXKeys Predictive Typing: PleXKeys is a predictive typing app for Microsoft Windows. It allows you to type faster and more accurately. With adaptive typing and instant spelling suggestions. Oh and Macros too! Automatic Word Prediction As you type, PleXKeys will predict the next word you are going to type. Then, by simply pressing the ENTER key, PleXKeys will insert the word for you, saving wasted keystrokes. After you have used PleXKeys enough for it to adapt to your typing style, typing entire sentences can b...Samples for my book "Getting Started with the Internet of Things": All examples for my book "Getting Started with the Internet of Things", the Gsiot.PachubeClient library, and the Gsiot.Server library are included in this project.SharePoint Hive - Projects & Articles: TBDSharePoint webparts for the community (Enterprise ready and free): SharePoint webparts for the community (Enterprise ready and free)SimpleCritters: An experiment with neural networks. This project is chiefly academic in nature. This project is concerned with evolving simple critter behavior using simulated neurons.Snip-A-Dillie-O Web: My venture into MVC3 / EF Code First / SQL CE. Snip-A-Dillie-O is just one piece of the bigger picture as a simple code snippet management toolTestMum: C#, Asp.net test projectVisDiskUse: Visualize how much disk space is being used by folders in your hard drive.Windows Phone App Accelerators (WPAA): Windows Phone App Accelerator aims to make creating a Windows Phone application even easier by creating a Visual Studio Template (or Templates) that do the bulk of the common work for you. This is NOT an app factory.

  Read the article

• CodePlex Daily Summary for Tuesday, July 02, 2013

  CodePlex Daily Summary for Tuesday, July 02, 2013Popular ReleasesMastersign.Expressions: Mastersign.Expressions v0.4.2: added support for if(<cond>, <true-part>, <false-part>) fixed multithreading issue with rand() improved demo applicationNB_Store - Free DotNetNuke Ecommerce Catalog Module: NB_Store v2.3.6 Rel0: v2.3.6 Is now DNN6 and DNN7 compatible Important : During update this install with overwrite the menu.xml setting, if you have changed this then make a backup before you upgrade and reapply your changes after the upgrade. Please view the following documentation if you are installing and configuring this module for the first time System Requirements Skill requirements Downloads and documents Step by step guide to a working store Please ask all questions in the Discussions tab. Document.Editor: 2013.26: What's new for Document.Editor 2013.26: New Insert Chart Improved User Interface Minor Bug Fix's, improvements and speed upsWsus Package Publisher: Release V1.2.1307.01: Fix an issue in the UI, approvals are not shown correctly in the 'Report' tabDirectX Tool Kit: July 2013: July 1, 2013 VS 2013 Preview projects added and updates for DirectXMath 3.05 vectorcall Added use of sRGB WIC metadata for JPEG, PNG, and TIFF SaveToWIC functions updated with new optional setCustomProps parameter and error check with optional targetFormatCore Server 2012 Powershell Script Hyper-v Manager: new_root.zip: Verison 1.0JSON Toolkit: JSON Toolkit 4.1.736: Improved strinfigy performance New serializing feature New anonymous type support in constructorsDotNetNuke® IFrame: IFrame 04.05.00: New DNN6/7 Manifest file and Azure Compatibility.VidCoder: 1.5.2 Beta: Fixed crash on presets with an invalid bitrate.Gardens Point LEX: Gardens Point LEX version 1.2.1: The main distribution is a zip file. This contains the binary executable, documentation, source code and the examples. ChangesVersion 1.2.1 has new facilities for defining and manipulating character classes. These changes make the construction of large Unicode character classes more convenient. The runtime code for performing automaton backup has been re-implemented, and is now faster for scanners that need backup. Source CodeThe distribution contains a complete VS2010 project for the appli...ZXMAK2: Version 2.7.5.7: - fix TZX emulation (Bruce Lee, Zynaps) - fix ATM 16 colors for border - add memory module PROFI 512K; add PROFI V03 rom image; fix PROFI 3.XX configTwitter image Downloader: Twitter Image Downloader 2 with Installer: Application file with Install shield and Dot Net 4.0 redistributableUltimate Music Tagger: Ultimate Music Tagger 1.0.0.0: First release of Ultimate Music TaggerBlackJumboDog: Ver5.9.2: 2013.06.28 Ver5.9.2 (1) ??????????(????SMTP?????)?????????? (2) HTTPS???????????Outlook 2013 Add-In: Configuration Form: This new version includes the following changes: - Refactored code a bit. - Removing configuration from main form to gain more space to display items. - Moved configuration to separate form. You can click the little "gear" icon to access the configuration form (still very simple). - Added option to show past day appointments from the selected day (previous in time, that is). - Added some tooltips. You will have to uninstall the previous version (add/remove programs) if you had installed it ...Terminals: Version 3.0 - Release: Changes since version 2.0:Choose 100% portable or installed version Removed connection warning when running RDP 8 (Windows 8) client Fixed Active directory search Extended Active directory search by LDAP filters Fixed single instance mode when running on Windows Terminal server Merged usage of Tags and Groups Added columns sorting option in tables No UAC prompts on Windows 7 Completely new file persistence data layer New MS SQL persistence layer (Store data in SQL database)...NuGet: NuGet 2.6: Released June 26, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.6Python Tools for Visual Studio: 2.0 Beta: We’re pleased to announce the release of Python Tools for Visual Studio 2.0 Beta. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, and cross platform debugging support. For a quick overview of the general IDE experience, please watch this video: http://www.youtube.com/watch?v=TuewiStN...Player Framework by Microsoft: Player Framework for Windows 8 and WP8 (v1.3 beta): Preview: New MPEG DASH adaptive streaming plugin for Windows Azure Media Services Preview: New Ultraviolet CFF plugin. Preview: New WP7 version with WP8 compatibility. (source code only) Source code is now available via CodePlex Git Misc bug fixes and improvements: WP8 only: Added optional fullscreen and mute buttons to default xaml JS only: protecting currentTime from returning infinity. Some videos would cause currentTime to be infinity which could cause errors in plugins expectin...AssaultCube Reloaded: 2.5.8: SERVER OWNERS: note that the default maprot has changed once again. Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we continue to try to package for those OSes. Or better yet, try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compi...New ProjectsALM Rangers DevOps Tooling and Guidance: Practical tooling and guidance that will enable teams to realize a faster deployment based on continuous feedback.Core Server 2012 Powershell Script Hyper-v Manager: Free core Server 2012 powershell scripts and batch files that replace the non-existent hyper-v manager, vmconnect and mstsc.Enhanced Deployment Service (EDS): EDS is a web service based utility designed to extend the deployment capabilities of administrators with the Microsoft Deployment Toolkit.ExtendedDialogBox: Libreria DialogBoxJazdy: This project is here only because we wanted to take advantage of a public git server.Mon Examen: This web interface is meant to make examinationsneet: summaryOrchard Multi-Choice Voting: A multiple choice voting Orchard module.Particle Swarm Optimization Solving Quadratic Assignment Problem: This project is submitted for the solving of QAP using PSO algorithms with addition of some modification Porjects: 23123123PPL Power Pack: PPL Power PackProperty Builder: Visual Studio tool for speeding up process of coding class properties getters and setters.RedRuler for Redline: I tried some on-screen rulers, none of them help me measure the UI element quickly based on the Redline. So I decided to created this handy RedRuler tool. Royale Living: Mahindra Royale Community PortalSearch and booking Hotel or Tours: Ð? án nghiên c?u c?a sinh viên tdt theo mô hình mvc 4SystemBuilder.Show: This tool is a helper after you create your project in visual studio to create the respective objects and interface. TalentDesk: new ptojectTcmplex: The Training Center teaches many different kind of course such as English, French, Computer hardware and computer softwareTFS Reporting Guide: Provides guidance and samples to enable TFS users to generate reports based on WIT data.Umbraco AdaptiveImages: Adaptive Images Package for UmbracoVirtualNet - A ILcode interpreter/emulator written in C++/Assembly: VirtualNet is a interpreter/emulator for running .net code in native without having to install the .Net FrameWorkVisual Blocks: Visual Blocks ????IDE ????? ??????? ????? ????/?? Visual Studio and Cloud Based Mobile Device Testing: Practical guidance enabling field to remove blockers to adoption and to use and extend the Perfecto Mobile Cloud Device testing within the context of VS.Windows 8 Time Picker for Windows Phone: A Windows Phone implementation of the Time Picker control found in the Windows 8.1 Alarms app.???? - SmallBasic?: ?????????

  Read the article

• CodePlex Daily Summary for Monday, June 02, 2014

  CodePlex Daily Summary for Monday, June 02, 2014Popular ReleasesPortable Class Library for SQLite: Portable Class Library for SQLite - 3.8.4.4: This pull request from mattleibow addresses an issue with custom function creation (define functions in C# code and invoke them from SQLite as id they where regular SQL functions). Impact: Xamarin iOSTweetinvi a friendly Twitter C# API: Tweetinvi 0.9.3.x: Timelines- Added all the parameters available from the Timeline Endpoints in Tweetinvi. - This is available for HomeTimeline, UserTimeline, MentionsTimeline // Simple query var tweets = Timeline.GetHomeTimeline(); // Create a parameter for queries with specific parameters var timelineParameter = Timeline.GenerateHomeTimelineRequestParameter(); timelineParameter.ExcludeReplies = true; timelineParameter.TrimUser = true; var tweets = Timeline.GetHomeTimeline(timelineParameter); Tweets- Add mis...Sandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...Tooltip Web Preview: ToolTip Web Preview: Version 1.0Database Helper: Release 1.0.0.0: First Release of Database HelperCoMaSy: CoMaSy1.0.2: !Contact Management SystemImage View Slider: Image View Slider: This is a .NET component. We create this using VB.NET. Here you can use an Image Viewer with several properties to your application form. We wish somebody to improve freely. Try this out! Author : Steven Renaldo Antony Yustinus Arjuna Purnama Putra Andre Wijaya P Martin Lidau PBK GENAP 2014 - TI UKDWAspose for Apache POI: Missing Features of Apache POI WP - v 1.1: Release contain the Missing Features in Apache POI WP SDK in Comparison with Aspose.Words for dealing with Microsoft Word. What's New ?Following Examples: Insert Picture in Word Document Insert Comments Set Page Borders Mail Merge from XML Data Source Moving the Cursor Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.SEToolbox: 01.032.014 Release 1: Added fix when loading game Textures for icons causing 'Unable to read beyond the end of the stream'. Added new Resource Report, that displays all in game resources in a concise report. Added in temp directory cleaner, to keep excess files from building up. Fixed use of colors on the windows, to work better with desktop schemes. Adding base support for multilingual resources. This will allow loading of the Space Engineers resources to show localized names, and display localized date a...ClosedXML - The easy way to OpenXML: ClosedXML 0.71.2: More memory and performance improvements. Fixed an issue with pivot table field order.Vi-AIO SearchBar: Vi – AIO Search Bar: Version 1.0Top Verses ( Ayat Emas ): Binary Top Verses: This one is the bin folder of the component. the .dll component is inside.Traditional Calendar Component: Traditional Calender Converter: Duta Wacana Christian University This file containing Traditional Calendar Component and Demo Aplication that using Traditional Calendar Component. This component made with .NET Framework 4 and the programming language is C# .SQLSetupHelper: 1.0.0.0: First Stable Version of SQL SetupComposite Iconote: Composite Iconote: This is a composite has been made by Microsoft Visual Studio 2013. Requirement: To develop this composite or use this component in your application, your computer must have .NET framework 4.5 or newer.Magick.NET: Magick.NET 6.8.9.101: Magick.NET linked with ImageMagick 6.8.9.1. Breaking changes: - Int/short Set methods of WritablePixelCollection are now unsigned. - The Q16 build no longer uses HDRI, switch to the new Q16-HDRI build if you need HDRI.fnr.exe - Find And Replace Tool: 1.7: Bug fixes Refactored logic for encoding text values to command line to handle common edge cases where find/replace operation works in GUI but not in command line Fix for bug where selection in Encoding drop down was different when generating command line in some cases. It was reported in: https://findandreplace.codeplex.com/workitem/34 Fix for "Backslash inserted before dot in replacement text" reported here: https://findandreplace.codeplex.com/discussions/541024 Fix for finding replacing...VG-Ripper & PG-Ripper: VG-Ripper 2.9.59: changes NEW: Added Support for 'GokoImage.com' links NEW: Added Support for 'ViperII.com' links NEW: Added Support for 'PixxxView.com' links NEW: Added Support for 'ImgRex.com' links NEW: Added Support for 'PixLiv.com' links NEW: Added Support for 'imgsee.me' links NEW: Added Support for 'ImgS.it' linksToolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2014.5.28): XrmToolbox improvement XrmToolBox updates (v1.2014.5.28)Fix connecting to a connection with custom authentication without saved password Tools improvement New tool!Solution Components Mover (v1.2014.5.22) Transfer solution components from one solution to another one Import/Export NN relationships (v1.2014.3.7) Allows you to import and export many to many relationships Tools updatesAttribute Bulk Updater (v1.2014.5.28) Audit Center (v1.2014.5.28) View Layout Replicator (v1.2014.5.28) Scrip...Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.10: Fix for Issue #20875 - echo switch doesn't work for CSS CSS should honor the SASS source-file comments JS should allow multi-line comment directivesNew Projects[ISEN] Rendu de projet Naughty3Dogs - Pong3D: Pong3D est un jeu qui reprend le principe classique du Pong en le portant dans un environnement 3D à l'aide du langage c# et du moteur Unity3DBootstrap for MVC: Bootstrap for MVC.F. A. Q. - Najczesciej zadawane pytania: FAQForuMvc: Technifutur short projecthomework456: no.iStoody: Studies organize solution, available through app for Windows and Windows Phone.liaoliao: ???????????Price Tracker: Allows a user to track prices based on parsed emailsRoslynEval: RoslynRx Hub: Rx Hub provides server side computation which initiate by subscriber requestSharepoint Online AppCache Reset: We are an IT resource company providing Virtual IT services and custom and opensource programs for everyday needs. UnitConversionLib : Smart Unit Conversion Library in C#: Conversion of units, arithmetic operation and parsing quantities with their units on run time. Smart unit converter and conversion lib for physical quantities,

  Read the article

• CodePlex Daily Summary for Monday, July 15, 2013

  CodePlex Daily Summary for Monday, July 15, 2013Popular ReleasesMVC Forum: MVC Forum v1.0: Finally version 1.0 is here! We have been fixing a few bugs, and making sure the release is as stable as possible. We have also changed the way configuration of the application works, mostly how to add your own code or replace some of the standard code with your own. If you download and use our software, please give us some sort of feedback, good or bad!SharePoint 2013 TypeScript Definitions: Release 1.1: TypeScript 0.9 support SharePoint TypeScript Definitions are now compliant with the new version of TypeScript TypeScript generics are now used for defining collection classes (derivatives of SP.ClientCollection object) Improved coverage Added mQuery definitions (m$) Added SPClientAutoFill definitions SP.Utilities namespace is now fully covered SP.UI modal dialog definitions improved CSR definitions improved, added some missing methods and context properties, mostly related to list ...GoAgent GUI: GoAgent GUI ??? 1.0.0: ????GoAgent GUI????，???????????.Net Framework 4.0 ???????: Windows 8 x64 Windows 8 x86 Windows 7 x64 Windows 7 x86 ???????： Windows 8.1 Preview (x86/x64) ???????： Windows XP ????： ????????GoAgent????，????????，?????????????，???????????????????，??????????，????。PiGraph: PiGraph 2.0.8.13: C?p nh?t:Các l?i dã s?a: S?a l?i không nh?p du?c s? âm. L?i tabindex trong giao di?n Thêm hàm Các l?i chua kh?c ph?c: L?i ghi chú nh?p nháy màu. L?i khung ghi chú vu?t ra kh?i biên khi luu file. Luu ý:N?u không kh?i d?ng duoc chuong trình, b?n nên c?p nh?t driver card d? h?a phiên b?n m?i nh?t: AMD Graphics Drivers NVIDIA Driver Xem yêu c?u h? th?ngD3D9Client: D3D9Client R12 for Orbiter Beta: D3D9Client release for orbiter BetaVidCoder: 1.4.23: New in 1.4.23 Added French translation. Fixed non-x264 video encoders not sticking in video tab. New in 1.4 Updated HandBrake core to 0.9.9 Blu-ray subtitle (PGS) support Additional framerates: 30, 50, 59.94, 60 Additional sample rates: 8, 11.025, 12 and 16 kHz Additional higher bitrates for audio Same as Source Constant Framerate 24-bit FLAC encoding Added Windows Phone 8 and Apple TV 3 presets Introduced process isolation for encodes. Now if HandBrake crashes, VidCoder will ...Project Server 2013 Event Handler Admin Tool: PSI Event Admin Tool: Download & exract the File. Use LoggerAdmin to upload the event handlers in project server 2013. PSIEventLogger\LoggerAdmin\bin\DebugGherkin editor: Gherkin Editor Beta 2: Fix issue #7 and add some refactoring and code cleanupNew-NuGetPackage PowerShell Script: New-NuGetPackage.ps1 PowerShell Script v1.2: Show nuget gallery to push to when prompting user if they want to push their package.Site Templates By Steve: SharePoint 2010 CORE Site Theme By Steve WSP: Great Site Theme to start with from Steve. See project home page for install instructions. This is a nice centered, mega-menu, fixed width masterpage with styles. Remember to update the mega menu lists.SharePoint Solution Installer: SharePoint Solution Installer V1.2.8: setup2013.exe now supports CompatibilityLevel to target specific hive Use setup.exe for SP2007 & SP2010. Use setup2013.exe for SP2013.TBox - tool to make developer's life easier.: TBox 1.021: 1)Add console unit tests runner, to run unit tests in parallel from console. Also this new sub tool can save valid xml nunit report. It can help you in continuous integration. 2)Fix build scripts.LifeInSharepoint Modern UI Update: Version 2: Some minor improvements, including Audience Targeting support for quick launch links. Also removing all NextDocs references.Virtual Photonics: VTS MATLAB Package 1.0.13 Beta: This is the beta release of the MATLAB package with examples of using the VTS libraries within MATLAB. Changes for this release: Added two new examples to vts_solver_demo.m that: 1) generates and plots R(lambda) at a given rho, and chromophore concentrations assuming a power law for scattering, and 2) solves inverse problem for R(lambda) at given rho. This example solves for concentrations of HbO2, Hb and H20 given simulated measurements created using Nurbs scaled Monte Carlo and inverted u...Advanced Resource Tab for Blend: Advanced Resource Tab: This is the first alpha release of the advanced resource tab for Blend for Visual Studio 2012.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.96: Fix for issue #19957: EXE should output the name of the file(s) being minified. Discussion #449181: throw a Sev-2 warning when trailing commas are detected on an Array literal. Perfectly legal to do so, but the behavior ends up working differently on different browsers, so throw a cross-browser warning. Add a few more known global names for improved ES6 compatibility update Nuget package to version 2.5 and automatically add the AjaxMin.targets to your project when you update the package...Outlook 2013 Add-In: Categories and Colors: This new version has a major change in the drawing of the list items: - Using owner drawn code to format the appointments using GDI (some flickering may occur, but it looks a little bit better IMHO, with separate sections). - Added category color support (if more than one category, only one color will be shown). Here, the colors Outlook uses are slightly different than the ones available in System.Drawing, so I did a first approach matching. ;-) - Added appointment status support (to show fr...Columbus Remote Desktop: 2.0 Sapphire: Added configuration settings Added update notifications Added ability to disable GPU acceleration Fixed connection bugsLINQ to Twitter: LINQ to Twitter v2.1.07: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.DotNetNuke® Community Edition CMS: 06.02.08: Major Highlights Fixed issue where the application throws an Unhandled Error and an HTTP Response Code of 200 when the connection to the database is lost. Security FixesNone Updated Modules/Providers ModulesNone ProvidersNoneNew Projects[.Net Intl] harroc_c;mallar_a;olouso_f: The goal of this project is to create a web crawler and a web front who allows you to search in your index. You will create a mini (or large!) search engine basButterfly Storage: Butterfly Storage is a data access technology based on object-oriented database model for Windows Store applications.KaveCompany: KaveCompleave that girl alone: a team project!MyClrProfiler: This project helps you learn about and develop your own CLR profiler.NETDeob: Deobfuscate obfuscated .NET files easilyProgram stomatologie: SummarySimple Graph Library: Simple portable class library for graphs data structures. .NET, Silverlight 4/5, Windows Phone, Windows RT, Xbox 360T6502 Emulator: T6502 is a 6502 emulator written in TypeScript using AngularJS. The goal is well-organized, readable code over performance.WP8 File Access Webserver: C# HTTP server and web application on Windows Phone 8. Implements file access, browsing and downloading.wpadk: wpadk????wp7?????? ?????????，?????、SDK、wpadk?????????????。??????????????????。??????????????????，????wpadk?????????????????????????????????????。xlmUnit: xlmUnit, Unit Testing

  Read the article

• CodePlex Daily Summary for Monday, May 26, 2014

  CodePlex Daily Summary for Monday, May 26, 2014Popular ReleasesClosedXML - The easy way to OpenXML: ClosedXML 0.71.1: More performance improvements. It's faster and consumes less memory.Role Based Views in Microsoft Dynamics CRM 2011: Role Based Views in CRM 2011 and 2013 - 1.1.0.0: Issues fixed in this build: 1. Works for CRM 2013 2. Lookup view not getting blockedSimCityPak: SimCityPak 0.3.1.0: Main New Features: Fixed Importing of Instance Names (get rid of the Dutch translations) Added advanced editor for Decal Dictionaries Added possibility to import .PNG to generate new decals Added advanced editor for Path display entriesSimple Connect To Db: SimpleConnectToDb_v1: SimpleConnectToDb_v1CRM 2011 / CRM 2013 Form Helper: v2014.05.25: v2014.05.25 Added PhoneFormat & PhoneFormatAreaCode v2014.05.24 Initial ReleaseCreate Word documents without MS Word: Release 3.0: Add support for Sections, Sections Headers and Footers and right to left languages.Corporate News App for SharePoint 2013: CorporateNewsApp v1.6.2.0: Important note This version contains a major bug fix about the generic error "Request failed. Unexpected response data from server null" This error occurs on SharePoint Online only, following an update of the Javascript API after May 2014. If you have installed this application manually in your applications company catalog, you can download the CorporateNewsApp.app file in the zip archive and update it manually. If you have installed this application directly from the SharePoint Store, it ...DevOS: DevOS: Plugin-system added Including:DevOS.exe DevOS API.dll Files must be in the some folderTiny Deduplicator: Tiny Deduplicator 1.0.1.0: Increased version number to 1.0.1.0 Moved all options to a separate 'Options' dialog window. Allows the user to specify a selection strategy which will help when dealing with large numbers of duplicate files. Available options are "None," "Keep First," and "Keep Last"C64 Studio: 3.5: Add: BASIC renumber function Add: !PET pseudo op Add: elseif for !if, } else { pseudo op Add: !TRACE pseudo op Add: Watches are saved/restored with a solution Add: Ctrl-A works now in export assembly controls Add: Preliminary graphic import dialog (not fully functional yet) Add: range and block selection in sprite/charset editor (Shift-Click = range, Alt-Click = block) Fix: Expression evaluator could miscalculate when both division and multiplication were in an expression without parenthesisSEToolbox: SEToolbox 01.031.009 Release 1: Added mirroring of ConveyorTubeCurved. Updated Ship cube rotation to rotate ship back to original location (cubes are reoriented but ship appears no different to outsider), and to rotate Grouped items. Repair now fixes the loss of Grouped controls due to changes in Space Engineers 01.030. Added export asteroids. Rejoin ships will merge grouping and conveyor systems (even though broken ships currently only maintain the Grouping on one part of the ship). Installation of this version wi...Player Framework by Microsoft: Player Framework for Windows and WP v2.0: Support for new Universal and Windows Phone 8.1 projects for both Xaml and JavaScript projects. See a detailed list of improvements, breaking changes and a general overview of version 2 ADDITIONAL DOWNLOADSSmooth Streaming Client SDK for Windows 8 Applications Smooth Streaming Client SDK for Windows 8.1 Applications Smooth Streaming Client SDK for Windows Phone 8.1 Applications Microsoft PlayReady Client SDK for Windows 8 Applications Microsoft PlayReady Client SDK for Windows 8.1 Applicat...TerraMap (Terraria World Map Viewer): TerraMap 1.0.6: Added support for the new Terraria v1.2.4 update. New items, walls, and tiles Added the ability to select multiple highlighted block types. Added a dynamic, interactive highlight opacity slider, making it easier to find highlighted tiles with dark colors (and fixed blurriness from 1.0.5 alpha). Added ability to find Enchanted Swords (in the stone) and Water Bolt books Fixed Issue 35206: Hightlight/Find doesn't work for Demon Altars Fixed finding Demon Hearts/Shadow Orbs Fixed inst...DotNet.Highcharts: DotNet.Highcharts 4.0 with Examples: DotNet.Highcharts 4.0 Tested and adapted to the latest version of Highcharts 4.0.1 Added new chart type: Heatmap Added new type PointPlacement which represents enumeration or number for the padding of the X axis. Changed target framework from .NET Framework 4 to .NET Framework 4.5. Closed issues: 974: Add 'overflow' property to PlotOptionsColumnDataLabels class 997: Split container from JS 1006: Series/Categories with numeric names don't render DotNet.Highcharts.Samples Updated s...ConEmu - Windows console with tabs: ConEmu 140523 [Alpha]: ConEmu - developer build x86 and x64 versions. Written in C++, no additional packages required. Run "ConEmu.exe" or "ConEmu64.exe". Some useful information you may found: http://superuser.com/questions/tagged/conemu http://code.google.com/p/conemu-maximus5/wiki/ConEmuFAQ http://code.google.com/p/conemu-maximus5/wiki/TableOfContents If you want to use ConEmu in portable mode, just create empty "ConEmu.xml" file near to "ConEmu.exe" Aspose for Apache POI: Missing Features of Apache POI SL - v 1.1: Release contain the Missing Features in Apache POI SL SDK in Comparison with Aspose.Slides for dealing with Microsoft Power Point. What's New ?Following Examples: Managing Slide Transitions Manage Smart Art Adding Media Player Adding Audio Frame to Slide Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.1.3: Added CompressLogs option to the config file. Each Install / Uninstall creates a timestamped zip file with all MSI and PSAppDeployToolkit logs contained within Added variable expansion to all paths in the configuration file Added documentation for each of the Toolkit internal variables that can be used Changed Install-MSUpdates to continue if any errors are encountered when installing updates Implement /Force parameter on Update-GroupPolicy (ensure that any logoff message is ignored) ...WordMat: WordMat v. 1.07: A quick fix because scientific notation was broken in v. 1.06 read more at http://wordmat.blogspot.com????: 《????》: 《????》（c???）??“????”???????，???????????????C?????????。???????,???????????????????????. ??????????????????????????????????；????????????????????????????。Mini SQL Query: Mini SQL Query (1.0.72.457): Apologies for the previous update! FK issue fixed and also a template data cache issue.New ProjectsASP.Net MCV4 Simplified Code Samples: This project intended to simplify the same. In this project each task is implemented with minimum lines of code to reduces complicity.Calvin: net???CodeLatino by Latinosoft: A Modified version for codeShow -- Probably taking more than a month.freeasyBackup: A free and easy to use Backup Tool for everyone. Without any cloud restrictions. freeasyExplorer: A free and easy to use File Explorer for everyone.openPDFspeedreader: #spritz #pdfreader #speedreader PDF Editor to Edit PDF Files in your ASP.NET Applications: This sample application allows the users to edit PDF files online using Aspose.Pdf for .NET.SharePoint World Cup 2013: world cup 2014SSAS Long Running Query Performance Helper: This utility helps investigate long running multidimensional or mining queries in discovery, de-parameterization and re-parameterization back to source format.

  Read the article

• CodePlex Daily Summary for Monday, August 11, 2014

  CodePlex Daily Summary for Monday, August 11, 2014Popular ReleasesSpace Engineers Server Manager: SESM V1.15: V1.15 - Updated Quartz library - Correct a bug in the new mod managment - Added a warning if you have backup enabled on a server but no static map configuredAspose for Apache POI: Missing Features of Apache POI SS - v 1.2: Release contain the Missing Features in Apache POI SS SDK in comparison with Aspose.Cells What's New ? Following Examples: Create Pivot Charts Detect Merged Cells Sort Data Printing Workbooks Feedback and Suggestions Many more examples are available at Aspose Docs. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.AngularGo (SPA Project Template): AngularGo.VS2013.vsix: First ReleaseTouchmote: Touchmote 1.0 beta 13: Changes Less GPU usage Works together with other Xbox 360 controls Bug fixesPublic Key Infrastructure PowerShell module: PowerShell PKI Module v3.0: Important: I would like to hear more about what you are thinking about the project? I appreciate that you like it (2000 downloads over past 6 months), but may be you have to say something? What do you dislike in the module? Maybe you would love to see some new functionality? Tell, what you think! Installation guide:Use default installation path to install this module for current user only. To install this module for all users — enable "Install for all users" check-box in installation UI ...Modern UI for WPF: Modern UI 1.0.6: The ModernUI assembly including a demo app demonstrating the various features of Modern UI for WPF. BREAKING CHANGE LinkGroup.GroupName renamed to GroupKey NEW FEATURES Improved rendering on high DPI screens, including support for per-monitor DPI awareness available in Windows 8.1 (see also Per-monitor DPI awareness) New ModernProgressRing control with 8 builtin styles New LinkCommands.NavigateLink routed command New Visual Studio project templates 'Modern UI WPF App' and 'Modern UI W...ClosedXML - The easy way to OpenXML: ClosedXML 0.74.0: Multiple thread safe improvements including AdjustToContents XLHelper XLColor_Static IntergerExtensions.ToStringLookup Exception now thrown when saving a workbook with no sheets, instead of creating a corrupt workbook Fix for hyperlinks with non-ASCII Characters Added basic workbook protection Fix for error thrown, when a spreadsheet contained comments and images Fix to Trim function Fix Invalid operation Exception thrown when the formula functions MAX, MIN, and AVG referenc...SEToolbox: SEToolbox 01.042.019 Release 1: Added RadioAntenna broadcast name to ship name detail. Added two additional columns for Asteroid material generation for Asteroid Fields. Added Mass and Block number columns to main display. Added Ellipsis to some columns on main display to reduce name confusion. Added correct SE version number in file when saving. Re-added in reattaching Motor when drag/dropping or importing ships (KeenSH have added RotorEntityId back in after removing it months ago). Added option to export and r...jQuery List DragSort: jQuery List DragSort 0.5.2: Fixed scrollContainer removing deprecated use of $.browser so should now work with latest version of jQuery. Added the ability to return false in dragEnd to revert sort order Project changes Added nuget package for dragsort https://www.nuget.org/packages/dragsort Converted repository from SVN to MercurialBraintree Client Library: Braintree 2.32.0: Allow credit card verification options to be passed outside of the nonce for PaymentMethod.create Allow billingaddress parameters and billingaddress_id to be passed outside of the nonce for PaymentMethod.create Add Subscriptions to paypal accounts Add PaymentMethod.update Add failonduplicatepaymentmethod option to PaymentMethod.create Add support for dispute webhooksThe Mario Kart 8 App: V1.0.2.1: First Codeplex release. WINDOWS INSTALLER ONLYAspose Java for Docx4j: Aspose.Words vs Docx4j - v 1.0: Release contain the Code Comparison for Features in Docx4j SDK and Aspose.Words What's New ?Following Examples: Accessing Document Properties Add Bookmarks Convert to Formats Delete Bookmarks Working with Comments Feedback and Suggestions Many more examples are available at Aspose Docs. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.File System Security PowerShell Module: NTFSSecurity 2.4.1: Add-Access and Remove-Access now take multiple accoutsYourSqlDba: YourSqlDba 5.2.1.: This version improves alert message that comes a while after you install the script. First it says to get it from YourSqlDba.CodePlex.com If you don't want to update now, just-rerun the script from your installed version. To get actual version running just execute install.PrintVersionInfo. . You can go to source code / history and click on change set 72957 to see changes in the script.Manipulator: Manipulator: manipulatorXNB filetype plugin for Paint.NET: Paint.NET XNB plugin v0.4.0.0: CHANGELOG Reverted old incomplete changes. Updated library for compatibility with Paint .NET 4. Updated project to NET 4.5. Updated version to 0.4.0.0. INSTALLATION INSTRUCTIONS Extract the ZIP file to your Paint.NET\FileTypes folder.EdiFabric: Release 4.1: Changed MessageContextWix# (WixSharp) - managed interface for WiX: Release 1.0.0.0: Release 1.0.0.0 Custom UI Custom MSI Dialog Custom CLR Dialog External UIMath.NET Numerics: Math.NET Numerics v3.2.0: Linear Algebra: Vector.Map2 (map2 in F#), storage-optimized Linear Algebra: fix RemoveColumn/Row early index bound check (was not strict enough) Statistics: Entropy ~Jeff Mastry Interpolation: use Array.BinarySearch instead of local implementation ~Candy Chiu Resources: fix a corrupted exception message string Portable Build: support .Net 4.0 as well by using profile 328 instead of 344. .Net 3.5: F# extensions now support .Net 3.5 as well .Net 3.5: NuGet package now contains pro...babelua: 1.6.5.1: V1.6.5.1 - 2014.8.7New feature: Formatting code; Stability improvement: fix a bug that pop up error "System.Net.WebResponse EndGetResponse";New ProjectsDouDou: a little project.Dynamic MVC: Dynamically generate views from your model objects for a data centric MVC application.EasyDb - Simple Data Access: EasyDb is a simple library for data access that allows you to write less code.ExpressToAbroad: just go!!!!!Full Silverlight Web Video/Voice Conferencing: The Goal of this project is to provide complete Open Source (Voice/Video Chatting Client/Server) Modules Using SilverlightGaia: Gaia is an app for Windows plataform, Gaia is like Siri and Google Now or Betty but Gaia use only text commands.pxctest: pxctestSTACS: Career Management System for MIT by Team "STACS"StrongWorld: StrongWorld.WebSuiteXevas Tools: Xevas is a professional coders group of 'Nimbuzz'. We make all tools for worldwide users of nimbuzz at free of cost.????????: ????????????????: ???????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ????????????????: ????????????????: ???????????????: ???????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ???????????????: ???????????????: ??????????????: ??????????????: ??????????????: ????????????????: ????????????????: ???????????????: ???????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ???????????????: ???????????????: ??????????????: ??????????????: ??????????????: ???????????????: ???????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ???????????????: ???????????????: ??????????????: ??????????????: ??????????????: ???????????????: ????????????????: ???????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ???????????????: ???????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ???????????????: ???????????????: ??????????????: ??????????????: ??????????????: ??????????????: ????????????????: ????????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ??????????????: ???????????????: ???????????????: ??????????????: ??????????????: ??????????????: ????????????????: ?????????

  Read the article

• Server Cabinet/Room Cooling

  - by user37226

  Hello all. I currently have two desktops and three servers in my office sitting on the floor (I know this is bad). With that many servers the ambient temperature in the room goes up quickly. I am located in Dallas, TX so during the winter, if the heat is kept low, it is not a problem, but during the summer it easily jumps the room +10 degrees. I have decided and found a free 42U server cabinet that a hosting company was throwing away to house all of these systems in. One server is in a rack mount case while the other four servers are housed in mid-tower cases. I have purchased shelves for each computer and plan to lay the towers side ways on these shelves (as replacing the cases costs a heck of a lot of money). I like the idea of housing all of these systems in the cabinet because it will save a lot of room and clean up all of the cabling currently laying all over the office floor. When putting this setup together over the next couple of weeks, I want to address issues with dust and cooling. The server cabinet has a fan on top, front plexiglass door and a rear metal door with vent wholes on the bottom. First the cooling issues. I know I am going to want to have cool air enter the bottom of the cabinet and exit the top. I do not want the room heating up though as this will make my work area hot and then make the servers warmer as the air eventually reenters the cabinet. I had an idea to fix this problem, but am unsure if it will work. I was thinking of taking flexible piping and adapting it to the back fans of the computer having the other end of the pipe at the top close to the cabinet's top mounted fan. I was then thinking of creating a duct around the top fan into the attic. Now I am very concerned that the attic will cause issues with this type of setup because during July/August time frame, the attic is easily 120 degrees F. I could also use the flexible pipe to take it to an attic exhaust vent if it would be better to vent it into the 100 degree air outside (at least there may be wind. The other option would be to buy a small portable air conditioner. This may be a possibility, but do I want to spend the extra money on power? I bet this increases the noise. Plus they are around $250 on Amazon. What would you all recommend? Depending on the solution I end up running with above, I would also like to limit the dust that gets into the cabinet. If I were to cut a whole and mount a second cabinet fan on the bottom of the rear door, could I possibly mount a standard home air filter on the other side of that whole? Thanks in advance for your recommendations. I look forward to reading your interesting ideas.

  Read the article

• Server Cabinet/Room Cooling

  - by user37226

  Hello all. I currently have two desktops and three servers in my office sitting on the floor (I know this is bad). With that many servers the ambient temperature in the room goes up quickly. I am located in Dallas, TX so during the winter, if the heat is kept low, it is not a problem, but during the summer it easily jumps the room +10 degrees. I have decided and found a free 42U server cabinet that a hosting company was throwing away to house all of these systems in. One server is in a rack mount case while the other four servers are housed in mid-tower cases. I have purchased shelves for each computer and plan to lay the towers side ways on these shelves (as replacing the cases costs a heck of a lot of money). I like the idea of housing all of these systems in the cabinet because it will save a lot of room and clean up all of the cabling currently laying all over the office floor. When putting this setup together over the next couple of weeks, I want to address issues with dust and cooling. The server cabinet has a fan on top, front plexiglass door and a rear metal door with vent wholes on the bottom. First the cooling issues. I know I am going to want to have cool air enter the bottom of the cabinet and exit the top. I do not want the room heating up though as this will make my work area hot and then make the servers warmer as the air eventually reenters the cabinet. I had an idea to fix this problem, but am unsure if it will work. I was thinking of taking flexible piping and adapting it to the back fans of the computer having the other end of the pipe at the top close to the cabinet's top mounted fan. I was then thinking of creating a duct around the top fan into the attic. Now I am very concerned that the attic will cause issues with this type of setup because during July/August time frame, the attic is easily 120 degrees F. I could also use the flexible pipe to take it to an attic exhaust vent if it would be better to vent it into the 100 degree air outside (at least there may be wind. The other option would be to buy a small portable air conditioner. This may be a possibility, but do I want to spend the extra money on power? I bet this increases the noise. Plus they are around $250 on Amazon. What would you all recommend? Depending on the solution I end up running with above, I would also like to limit the dust that gets into the cabinet. If I were to cut a whole and mount a second cabinet fan on the bottom of the rear door, could I possibly mount a standard home air filter on the other side of that whole? Thanks in advance for your recommendations. I look forward to reading your interesting ideas.

  Read the article

• CodePlex Daily Summary for Sunday, September 29, 2013

  CodePlex Daily Summary for Sunday, September 29, 2013Popular ReleasesAudioWordsDownloader: AudioWordsDownloader 1.1 build 88: New features -------- list of words (mp3 files) is available upon typing when a download path is defined list of download paths is added paths history settings added Bug fixed ----- case mismatch in word search field fixed path not exist bug fixed when history has been used path, when filled from dialog, not stored refresh autocomplete list after path change word sought is deleted when path is changed at the end sought word list is deleted word list not refreshed download end...Activity Viewer 2012: Activity Viewer 2012 V 5.0.0.3: Planning to add new features: 1. Import/Export rules 2. Tabular mode multi servers connections.Tweetinvi a friendly Twitter C# API: Alpha 0.8.3.0: Version 0.8.3.0 emphasis on the FIlteredStream and ease how to manage Exceptions that can occur due to the network or any other issue you might encounter. Will be available through nuget the 29/09/2013. FilteredStream Features provided by the Twitter Stream API - Ability to track specific keywords - Ability to track specific users - Ability to track specific locations Additional features - Detect the reasons the tweet has been retrieved from the Filtered API. You have access to both the ma...AcDown?????: AcDown????? v4.5: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ??v4.5 ???? AcPlay????????v3.5 ????????，???????????30% ?? ???????GoodManga.net???? ?? ?????????? ?? ??Acfun?????????? ??Bilibili??????????? ?????????flvcd???????? ??SfAcg????????????? ???????????? ???????????????? ????32...OfflineBrowser: Release v1.2: This release includes some multi-threading support, a better progress bar, more JavaScript fixes, and a help system. This release is also portable (can run with no issues from a flash drive).CtrlAltStudio Viewer: CtrlAltStudio Viewer 1.0.0.34288 Release: This release of the CtrlAltStudio Viewer includes the following significant features: Stereoscopic 3D display support. Based on Firestorm viewer 4.4.2 codebase. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-0-0-34288-release Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http://ctrlaltstudio.com/viewer/privacy Disclaimer: This software is not provided or supported by Linden Lab, the makers of ...CrmSvcUtil Generate Attribute Constants: Generate Attribute Constants (1.0.5018.28159): Built against version 5.0.15 of the CRM SDK Fixed issue where constant for primary key attribute was being duplicated in all entity classes Added ability to override base class for entity classesC# Intellisense for Notepad++: Release v1.0.6.0: Added support for classless scripts To avoid the DLLs getting locked by OS use MSI file for the installation.CS-Script for Notepad++: Release v1.0.6.0: Added support for classless scripts To avoid the DLLs getting locked by OS use MSI file for the installation.SimpleExcelReportMaker: Serm 0.02: SourceCode and SampleMagick.NET: Magick.NET 6.8.7.001: Magick.NET linked with ImageMagick 6.8.7.0. Breaking changes: - ToBitmap method of MagickImage returns a png instead of a bmp. - Changed the value for full transparency from 255(Q8)/65535(Q16) to 0. - MagickColor now uses floats instead of Byte/UInt16.Media Companion: Media Companion MC3.578b: With the feedback received over the renaming of Movie Folders, and files, there has been some refinement done. As well as I would like to introduce Blu-Ray movie folder support, for Pre-Frodo and Frodo onwards versions of XBMC. To start with, Context menu option for renaming movies, now has three sub options: Movie & Folder, Movie only & Folder only. The option Manual Movie Rename needs to be selected from Movie Preferences, but the autoscrape boxes do not need to be selected. Blu Ray Fo...WDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: WDTVHubGen v2.1.3.api release: This is for the brave at heart, this is the maint release to update to the new movie api. please send feedback on fix requests.FFXIV Crafting Simulator: Crafting Simulator 2.3: - Major refactoring of the code behind. - Added a current durability and a current CP textbox.DNN CMS Platform: 07.01.02: Major HighlightsAdded the ability to manage the Vanity URL prefix Added the ability to filter members in the member directory by role Fixed issue where the user could inadvertently click the login button multiple times Fixed issues where core classes could not be used in out of process cache provider Fixed issue where profile visibility submenu was not displayed correctly Fixed issue where the member directory was broken when Convert URL to lowercase setting was enabled Fixed issu...Rawr: Rawr 5.4.1: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Sample MVC4 EF Codefirst Architecture: RazMVCWebApp ver 1.1: Signal R sample is added.CODE Framework: 4.0.30923.0: See change notes in the documentation section for details on what's new. Note: If you download the class reference help file with, you have to right-click the file, pick "Properties", and then unblock the file, as many browsers flag the file as blocked during download (for security reasons) and thus hides all content.JayData -The unified data access library for JavaScript: JayData 1.3.2 - Indian Summer Edition: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like WebAPI, OData, MongoDB, WebSQL, SQLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with KendoUI, Angular.js, Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video KendoUI examples: JayData example site Examples for map integration JayData example site What's new in JayData 1.3.2 - Indian Summer Edition For detai...ZXing.Net: ZXing.Net 0.12.0.0: sync with rev. 2892 of the java version new PDF417 decoder improved Aztec decoder global speed improvements direct Kinect support for ColorImageFrame better Structured Append support many other small bug fixes and improvementsNew ProjectsCACHEDB: CLIENT-DATABASE || CLIENT_CACHEDB-DATABASEClassic WiX Burn Theme: A WiX Burn theme inspired by the classic WiX wizard user interface.CryptStr.Fody: A post-build weaver that encrypts literal strings in your .NET assemblies without breaking ClickOnce.Easy Code: A setting framework.EduSoft: This is a school eg.GameStuff: GameStuff is a library of Physics and Geometrics concepts for video game. Nekora Test Project: Nekora test projectPopCorn Console Game: Simple console gameRadioController: This project started from people installing Tablets in Mustangs. You would typically loose most control of the radio. This projects brings that back!Random searcher i pochodne: Wyszukiwarka plików multimedialnych i czego dusza zapragnie.SporkRandom: A .NET (C#, Visual Basic) interface for the true random number generator service of random.org

  Read the article

• CodePlex Daily Summary for Friday, September 28, 2012

  CodePlex Daily Summary for Friday, September 28, 2012Popular ReleasesWPUtils: WPUtils 1.2: Just fixed an issue related to isolated storage path for ChoosePhotoBehavior. Specifically CreateDirectory method only accepts relative path, but was given a "/photos/" path which would result in exception. Please make sure you have this fix if you are using ChoosePhotoBehavior! NOTE: Windows Phone SDK 7.1 or higher is required.TFS Timesheets: TFS Timesheets 2.0: New features: Visual Studio 2012 support Bug fixes: Scaling mode inherited rather than font scalingCRM 2011 Visual Ribbon Editor: Visual Ribbon Editor 1.1 Beta: Visual Ribbon Editor 1.1 Beta What's New: Fixed scrolling issue in UnHide dialog Added support for connecting via ADFS / IFD Added support for more than one action for a button Added support for empty StringParameter for Javascript functions Fixed bug in rule CrmClientTypeRule when selecting Outlook option Extended Prefix field in New Button dialogFree Aspx Image Gallery: Free Aspx Image Gallery Release V1: This is first basic release of my free aspx image gallery project. It is free to use and modify by the user without any need of providing any credit to me.Simple Microsoft Excel Document Converter (Convert To XLS, XLSX, PDF, XPS): ExcelDocConverter 0.1 Beta: Initial Release Microsoft Excel Documents Converter. Microsoft Excel 1997-2003 (XLS) Microsoft Excel 2007/2010 (XLSX) Portable Document Format (PDF) Microsoft XPS Document (XPS) Difference between NET2.0 and NET3.5 This program uses .NET Framework runtime library to run. Basically, they are no differences. Only the runtime library version is different. For older computers, i.e. Windows XP, might not have .NET Framework 3.5 installed, then use NET2.0 in stead. But, some Windows XP SP2 mig...Office File Properties: Office File Properties 3.3.1: Bug fix. Convert file extension to lowercase before checking.LoBDb.NET: LoBDb.NET 1.0.9: Centido.Core library: 1) SQL Server script bug fix: an error when changing the MaxLength property of an indexed string column or when changing the Precision-Scale properties of a decimal column. LobDb.NET Manager: 1) Changing the Precision, Scale, Default Value, Minimum and Maximum properties of a decimal column now enables the Save button. 2) The MaxLength property of a string column and the Precision+Scale values of a decimal column are now displayed in the column list. 3) Changing the Min...Chaos games: Chaos games: Small app for generating fractals using chaos gamesVisual Studio Icon Patcher: Version 1.5.2: This version contains no new images from v1.5.1 Contains the following improvements: Better support for detecting the installed languages The extract & inject commands won’t run if Visual Studio is running You may now run in extract or inject mode The p/invoke code was cleaned up based on Code Analysis recommendations When a p/invoke method fails the Win32 error message is now displayed Error messages use red text Status messages use green textMCEBuddy 2.x: MCEBuddy 2.2.16: Changelog for 2.2.16 (32bit and 64bit) Now a standalone remote client also available to control the Engine remotely. 1. Added support for remote connections for status and configuration. MCEBuddy now uses port 23332. The remote server name, remote server port and local server port can be updated from the MCEBuddy.conf file BUT the Service or GUI needs to be restarted (i.e. reboot or restart service or restart program) for it to take effect. Refer to documentation for more details http://mce...ZXing.Net: ZXing.Net 0.9.0.0: On the way to a release 1.0 the API should be stable now with this version. sync with rev. 2393 of the java version improved api better Unity support Windows RT binaries Windows CE binaries new Windows Service demo new WPF demo WindowsCE Hotfix: Fixes an error with ISO8859-1 encoding and scannning of QR-Codes. The hotfix is only needed for the WindowsCE platform.SSIS GoogleAnalyticsSource: Version 1.1 Alpha 2: The component uses now the Google API V2.4 including the management API.MVC Bootstrap: MVC Boostrap 0.5.1: A small demo site, based on the default ASP.NET MVC 3 project template, showing off some of the features of MVC Bootstrap. This release uses Entity Framework 5 for data access and Ninject 3 for dependency injection. If you download and use this project, please give some feedback, good or bad!menu4web: menu4web 1.0 - free javascript menu for web sites: menu4web 1.0 has been tested with all major browsers: Firefox, Chrome, IE, Opera and Safari. Minified m4w.js library is less than 9K. Includes 21 menu examples of different styles. Can be freely distributed under The MIT License (MIT).Rawr: Rawr 5.0.0: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Coevery - Free CRM: Coevery 1.0.0.26: The zh-CN issue has been solved. We also add a project management module.VidCoder: 1.4.1 Beta: Updated to HandBrake 4971. This should fix some issues with stuck PGS subtitles. Fixed build break which prevented pre-compiled XML serializers from showing up. Fixed problem where a preset would get errantly marked as modified when re-opening the encode settings window or importing a new preset.JSLint for Visual Studio 2010: 1.4.0: VS2012 support is alphaBlackJumboDog: Ver5.7.2: 2012.09.23 Ver5.7.2 (1)InetTest?? (2)HTTP?????????????????100???????????Player Framework by Microsoft: Player Framework for Windows 8 (Preview 6): IMPORTANT: List of breaking changes from preview 5 Added separate samples download with .vsix dependencies instead of source dependencies Support for FreeWheel SmartXML ad responses Support for Smooth Streaming SDK DownloaderPlugins Support for VMAP and TTML polling for live scenarios Support for custom smooth streaming byte stream and scheme handlers Support for new play time and position tracking plugin Added IsLiveChanged event Added AdaptivePlugin.MaxBitrate property Add...New ProjectsChaos games: Small app to generating fractals using chaos gamesDocument Digitalization System: This system will allow the users with on one or more PCs to digitalize pdf files and store it or export it to other file formats.ExternalTokenAnalysisOffline: SPUser?UserToken????????????????。FinalProjectSeniorProject: ***Unfinished*** Senior project build GL Ponpes Selamat Kendal: Aplikasi Akuntansi Sekolah Pondok Pesantren Modern Selamat KendalHealth Care Manager: One of keynote planned for the Brazzaville Microsoft event coming soon.Orchard Commerce History with PayPal: Project expands on Nwazet.Commerce module (and is required for this module to work). Adds a purchase history, product role associations, and PayPal.PDF.NET: PWMIS ?????? Ver 4.5 ???? SMS Egypt: This project is intended to make it easy for people to send SMS to their customers using SMS gateways inside and outside Egypt. Strong Caml: Use the familiar CAML syntax, but now do it in strongly-typed, dynamic code. Just follow Visual Studio's IntelliSense, and your CAML query can't go wrong!TrainingFrameWork: TrainingFrameWork

  Read the article

• Effectiveness and Efficiency

  - by Daniel Moth

  In the professional environment, i.e. at work, I am always seeking personal growth and to be challenged. The result is that my assignments, my work list, my tasks, my goals, my commitments, my [insert whatever word resonates with you] keep growing (in scope and desired impact). Which in turn means I have to keep finding new ways to deliver more value, while not falling into the trap of working more hours. To do that I continuously evaluate both my effectiveness and my efficiency. EFFECTIVENESS The first thing I check is my effectiveness: Am I doing the right things? Am I focusing too much on unimportant things? Am I spending more time doing stuff that is important to my team/org/division/business/company, or am I spending it on stuff that is important to me and that I enjoy doing? Am I valuing activities that maybe I have outgrown and should be delegated to others who are at a stage I have surpassed (in Microsoft speak: is the work I am doing level appropriate or am I still operating at the previous level)? Notice how the answers to those questions change over time and due to certain events, so I have to remind myself to revisit them frequently. Events that force me to re-examine them are: change of role, change of team/org/etc, change of direction of team/org/etc, re-org, new hires on the team that take on some of the work I did, personal promotion, change of manager... and if none of those events has occurred since the last annual review, I ask myself those at each annual review anyway. If you think you are not being effective at work, make a list of the stuff that you do and start tracking where your time goes. In parallel, have a discussion with your manager about where they think your time should go. Ultimately your time is finite and hence it is your most precious investment, don't waste it. If your management doesn't value as highly what you spend your time on, then either convince your management, or stop spending your time on it, or find different management: Lead, Follow, or get out of the way! That's my view on effectiveness. You have to fix that before moving to being efficient, or you may end up being very efficient at stuff that nobody wants you to be doing in the first place. For example, you may be spending your time writing blog posts and becoming better and faster at it all the time. If your manager thinks that is not even part of your job description, you are wasting your time to satisfy your inner desires. Nobody can help you with your effectiveness other than your management chain and your management peers - they are the judges of it. EFFICIENCY The second thing I check is my efficiency: Am I doing things right? For me, doing things right means that I deliver the same quality of work faster [than what I used to, and than my peers, and than expected of me]. The result is that I can achieve more [than what I used to, and than my peers, and than expected of me]. Notice how the efficiency goal is a more portable one. If, by whatever criteria, you think you are the best at [insert your own skill here], this can change at two events: because you have new colleagues (who are potentially better than your older ones), and it can change with a change of manager (who has potentially higher expectations). That's about it. Once you are efficient at something, you carry that with you... All you need to really be doing here is, when taking on new kinds of work that you haven't done before, try a few approaches and devise a system so that you can become efficient at this new activity too... Just keep "collecting" stuff that you are efficient at. If you think you are not being efficient at something, break it down: What are the steps you take to complete that task? How long do you spend on each step? Talk to others about what steps they take, to see if you can optimize some steps away or trade them for better steps, or just learn how to complete a step faster. Have a system for every task you take so that you can have repeatable success. That's my view on efficiency. You have to fix it so that you can free up time to do more. When you plan a route from A to B - all else being equal - you try to get there as fast as possible so why would you not want to do that with your everyday work? For example, imagine you are inefficient at processing email: You spend more time than necessary dealing with email, and you still end up with dropped email threads and with slower response times than others. How can you improve? Talk to someone that you think is good at this, understand their system (e.g. here is my email processing system) and come up with one that works for you. Parting Thoughts Are you considered, by your colleagues and manager, an effective and efficient person at your workplace? If you are, what would you change if you were asked by your management to do the job of two people? Seriously, think about that! Your immediate reaction may be "that is not possible", but it actually is. You just have to re-assess what things that were previously important will now stop being important, by discussing them with your management and reaching agreement on relative priorities. For example, stuff that was previously on your plate may now have to be delegated or dropped. Where you thought you were efficient, maybe now you have to find an even faster path to completion, perhaps keeping in mind that Perfect is the Enemy of “Good Enough”. My personal experience (from both observing others and from my own reflection) is that when folks are struggling to keep up at work it is because of two reasons: They are investing energy in stuff that they enjoy doing which the business regards as having a lower priority than a lot of other things on their plate. They are completing tasks to a level of higher quality than what is required (due to personal pride) missing the big picture which almost always mandates completing three tasks at good enough quality than knocking only one of them out of the park while the other two come in late or not at all. There is a lot of content on the web, so I strongly encourage you to use your favorite search engine to read other views on effectiveness and efficiency (Bing, Google). Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• What seems to be plaguing my hard drives?

  - by Craig

  In a little bit of a tech nightmare here. I know oodles about software, not so much more than the above average user about hardware. I recently had to toss an old desktop of mine. It was gradually getting slower and slower, and after shutting the desktop down for long periods of time, it would choke up upon startup. Sometimes it'd give a disk read error, sometimes say no OS was found, etc. Restarting it about 5-15 times would eventually boot properly. Weird. I also noticed that startup programs were going missing, Dropbox was reindexing my entire folder, and Backblaze was backing up less than the number of files that it should. This lead me to believe it was probably a hard drive issue. I began to wonder why I'd have hard drive issues, and came to closure when I assumed it was because of recent power surges and outages. I'm sure that does a number on the drive. I bought a new desktop recently. It's not a beast or anything, but it's enough for what I do. It's an eMachines (I know, I know) Ultra-Slim (http://www.amazon.com/eMachines-Ultra-Slim-ER1401-57-Desktop-PC/dp/B00475OG9U). This is ideal for me because it's small and portable. It comes with an AC adapter and battery, like a laptop. Just to be safe, I bought an uninterruptable power supply on top of that. It's basically protected completely from any outages that might scramble the drive. I set this up a few days ago and for the past few days I've been perfecting settings, downloading the usual applications, etc. Two days ago, I noticed Dropbox was reindexing my entire Dropbox folder. I installed both Dropbox and Backblaze on this system, but it is very much more lightweight than the other. Only about 15 third-party applications installed. I thought that maybe Dropbox and Backblaze were stressing my system, so I turned off Backblaze. Still, Dropbox runs and comes across this infinite reindex issue. I noticed that upon a reboot recently, two applications did not start on startup either. Also, much like my old desktop, every 3rd or 4th reboot, I'll be forced into a chkdsk. This makes me incredibly nervous. What could possibly be going wrong with my old, years-old desktop that is immediately causing the same issues to my new one? I've considered all of the basics. I'm in a very air conditioned room. I take run routine virus scans. I'd like to think I take care of my systems very well. What is this issue that is haunting me? There's always the possibility that this new desktop has a junk hard drive, but it just seems way too coincidental.

  Read the article

• What's new in EJB 3.2 ? - Java EE 7 chugging along!

  - by arungupta

  EJB 3.1 added a whole ton of features for simplicity and ease-of-use such as @Singleton, @Asynchronous, @Schedule, Portable JNDI name, EJBContainer.createEJBContainer, EJB 3.1 Lite, and many others. As part of Java EE 7, EJB 3.2 (JSR 345) is making progress and this blog will provide highlights from the work done so far. This release has been particularly kept small but include several minor improvements and tweaks for usability. More features in EJB.Lite Asynchronous session bean Non-persistent EJB Timer service This also means these features can be used in embeddable EJB container and there by improving testability of your application. Pruning - The following features were made Proposed Optional in Java EE 6 and are now made optional. EJB 2.1 and earlier Entity Bean Component Contract for CMP and BMP Client View of an EJB 2.1 and earlier Entity Bean EJB QL: Query Language for CMP Query Methods JAX-RPC-based Web Service Endpoints and Client View The optional features are moved to a separate document and as a result EJB specification is now split into Core and Optional documents. This allows the specification to be more readable and better organized. Updates and Improvements Transactional lifecycle callbacks in Stateful Session Beans, only for CMT. In EJB 3.1, the transaction context for lifecyle callback methods (@PostConstruct, @PreDestroy, @PostActivate, @PrePassivate) are defined as shown. @PostConstruct @PreDestroy @PrePassivate @PostActivate Stateless Unspecified Unspecified N/A N/A Stateful Unspecified Unspecified Unspecified Unspecified Singleton Bean's transaction management type Bean's transaction management type N/A N/A In EJB 3.2, stateful session bean lifecycle callback methods can opt-in to be transactional. These methods are then executed in a transaction context as shown. @PostConstruct @PreDestroy @PrePassivate @PostActivate Stateless Unspecified Unspecified N/A N/A Stateful Bean's transaction management type Bean's transaction management type Bean's transaction management type Bean's transaction management type Singleton Bean's transaction management type Bean's transaction management type N/A N/A For example, the following stateful session bean require a new transaction to be started for @PostConstruct and @PreDestroy lifecycle callback methods. @Statefulpublic class HelloBean {   @PersistenceContext(type=PersistenceContextType.EXTENDED)   private EntityManager em;    @TransactionAttribute(TransactionAttributeType.REQUIRES_NEW)   @PostConstruct   public void init() {        myEntity = em.find(...);   }   @TransactionAttribute(TransactionAttributeType.REQUIRES_NEW)    @PostConstruct    public void destroy() {        em.flush();    }} Notice, by default the lifecycle callback methods are not transactional for backwards compatibility. They need to be explicitly opt-in to be made transactional. Opt-out of passivation for stateful session bean - If your stateful session bean needs to stick around or it has non-serializable field then the bean can be opt-out of passivation as shown. @Stateful(passivationCapable=false)public class HelloBean {    private NonSerializableType ref = ... . . .} Simplified the rules to define all local/remote views of the bean. For example, if the bean is defined as: @Statelesspublic class Bean implements Foo, Bar {    . . .} where Foo and Bar have no annotations of their own, then Foo and Bar are exposed as local views of the bean. The bean may be explicitly marked @Local as @Local@Statelesspublic class Bean implements Foo, Bar {    . . .} then this is the same behavior as explained above, i.e. Foo and Bar are local views. If the bean is marked @Remote as: @Remote@Statelesspublic class Bean implements Foo, Bar {    . . .} then Foo and Bar are remote views. If an interface is marked @Local or @Remote then each interface need to be explicitly marked explicitly to be exposed as a view. For example: @Remotepublic interface Foo { . . . }@Statelesspublic class Bean implements Foo, Bar {    . . .} only exposes one remote interface Foo. Section 4.9.7 from the specification provide more details about this feature. TimerService.getAllTimers is a newly added convenience API that returns all timers in the same bean. This is only for displaying the list of timers as the timer can only be canceled by its owner. Removed restriction to obtain the current class loader, and allow to use java.io package. This is handy if you want to do file access within your beans. JMS 2.0 alignment - A standard list of activation-config properties is now defined destinationLookup connectionFactoryLookup clientId subscriptionName shareSubscriptions Tons of other clarifications through out the spec. Appendix A provide a comprehensive list of changes since EJB 3.1. ThreadContext in Singleton is guaranteed to be thread-safe. Embeddable container implement Autocloseable. A complete replay of Enterprise JavaBeans Today and Tomorrow from JavaOne 2012 can be seen here (click on CON4654_mp4_4654_001 in Media). The specification is still evolving so the actual property or method names or their actual behavior may be different from the currently proposed ones. Are there any improvements that you'd like to see in EJB 3.2 ? The EJB 3.2 Expert Group would love to hear your feedback. An Early Draft of the specification is available. The latest version of the specification can always be downloaded from here. Java EE 7 Specification Status EJB Specification Project JIRA of EJB Specification JSR Expert Group Discussion Archive These features will start showing up in GlassFish 4 Promoted Builds soon.

  Read the article

• Three ways to upload/post/convert iMovie to YouTube

  - by user44251

  For Mac users, iMovie is probably a convenient tool for making, editing their own home movies so as to upload to YouTube for sharing with more people. However, uploading iMovie files to YouTube can't be always a smooth run, I did notice many people complaining about it. This article is delivered for guiding those who are haunted by the nightmare by providing three common ways to upload iMovie files to YouTube. YouTube and iMovie YouTube is the most popular video sharing website for users to upload, share and view videos. It empowers anyone with an Internet connection the ability to upload video clips and share them with friends, family and the world. Users are invited to leave comments, pick favourites, send messages to each other and watch videos sorted into subjects and channels. YouTube accepts videos uploaded in most container formats, including WMV (Windows Media Video), 3GP (Cell Phones), AVI (Windows), MOV (Mac), MP4 (iPod/PSP), FLV (Adobe Flash), MKV (H.264). These include video codecs such as MP4, MPEG and WMV. iMovie is a common video editing software application comes with every Mac for users to edit their own home movies. It imports video footage to the Mac using either the Firewire interface on most MiniDV format digital video cameras, the USB port, or by importing the files from a hard drive where users can edit the video clips, add titles, and add music. Since 1999, eight versions of iMovie have been released by Apple, each with its own functions and characteristic, and each of them deal with videos in a way more or less different. But the most common formats handled with iMovie if specialty discarded as far as to my research are MOV, DV, HDV, MPEG-4. Three ways for successful upload iMovie files to YouTube Solution one and solution two suitable for those who are 100 certainty with their iMovie files which are fully compatible with YouTube. For smooth uploading, you are required to get a YouTube account first. Solution 1: Directly upload iMovie to YouTube Step 1: Launch iMovie, select the project you want to upload in YouTube. Step 2: Go to the file menu, click Share, select Export Movie Step 3: Specify the output file name and directory and then type the video type and video size. Solution 2: Post iMovie to YouTube straightly Step 1: Launch iMovie, choose the project you want to post in YouTube Step 2: From the Share menu, choose YouTube Step 3: In the pop-up YouTube windows, specify the name of your YouTube account, the password, choose the Category and fill in the description and tags of the project. Tick Make this movie more private on the bottom of the window, if possible, to limit those who can view the project. Click Next, and then click Publish. iMovie will automatically export and upload the movie to YouTube. Step 4: Click Tell a Friend to email friends and your family about your film. You are also allowed to copy the URL from Tell a Friend window and paste it into an email you created in your favourite email application if you like. Anyone you send to email to will be able to follow the URL directly to your movie. Note: Videos uploaded to YouTube are limited to ten minutes in length and a file size of 2GB. Solution 3: Upload to iMovie after conversion If neither of the above mentioned method works, there is still a third way to turn to. Sometimes, your iMovie files may not be recognized by YouTube due to the versions of iMovie (settings and functions may varies among versions), video itself (video format difference because of file extension, resolution, video size and length), compatibility (videos that are completely incompatible with YouTube). In this circumstance, the best and reliable method is to convert your iMovie files to YouTube accepted files, iMovie to YouTube converter will be inevitably the ideal choice. iMovie to YouTube converter is an elaborately designed tool for convert iMovie files to YouTube workable WMV, 3GP, AVI, MOV, MP4, FLV, MKV for smooth uploading with hard-to-believe conversion speed and second to none output quality. It can also convert between almost all popular popular file formats like AVI, WMV, MPG, MOV, VOB, DV, MP4, FLV, 3GP, RM, ASF, SWF, MP3, AAC, AC3, AIFF, AMR, WAV, WMA etc so as to put on various portable devices, import to video editing software or play on vast amount video players. iMovie to YouTube converter can also served as an excellent video editing tool to meet your specific program requirements. For example, you can cut your video files to a certain length, or split your video files to smaller ones and select the proper resolution suitable for demands of YouTube by Clip or Settings separately. Crop allows you to cut off unwanted black edges from your videos. Besides, you can also have a good command of the whole process or snapshot your favourite pictures from the preview window. More can be expected if you have a try.

  Read the article

• Three ways to upload/post/convert iMovie to YouTube [closed]

  - by alexyu2010

  For Mac users, iMovie is probably a convenient tool for making, editing their own home movies so as to upload to YouTube for sharing with more people. However, uploading iMovie files to YouTube can't be always a smooth run, I did notice many people complaining about it. This article is delivered for guiding those who are haunted by the nightmare by providing three common ways to upload iMovie files to YouTube. YouTube and iMovie YouTube is the most popular video sharing website for users to upload, share and view videos. It empowers anyone with an Internet connection the ability to upload video clips and share them with friends, family and the world. Users are invited to leave comments, pick favourites, send messages to each other and watch videos sorted into subjects and channels. YouTube accepts videos uploaded in most container formats, including WMV (Windows Media Video), 3GP (Cell Phones), AVI (Windows), MOV (Mac), MP4 (iPod/PSP), FLV (Adobe Flash), MKV (H.264). These include video codecs such as MP4, MPEG and WMV. iMovie is a common video editing software application comes with every Mac for users to edit their own home movies. It imports video footage to the Mac using either the Firewire interface on most MiniDV format digital video cameras, the USB port, or by importing the files from a hard drive where users can edit the video clips, add titles, and add music. Since 1999, eight versions of iMovie have been released by Apple, each with its own functions and characteristic, and each of them deal with videos in a way more or less different. But the most common formats handled with iMovie if specialty discarded as far as to my research are MOV, DV, HDV, MPEG-4. Three ways for successful upload iMovie files to YouTube Solution one and solution two suitable for those who are 100 certainty with their iMovie files which are fully compatible with YouTube. For smooth uploading, you are required to get a YouTube account first. Solution 1: Directly upload iMovie to YouTube Step 1: Launch iMovie, select the project you want to upload in YouTube. Step 2: Go to the file menu, click Share, select Export Movie Step 3: Specify the output file name and directory and then type the video type and video size. Solution 2: Post iMovie to YouTube straightly Step 1: Launch iMovie, choose the project you want to post in YouTube Step 2: From the Share menu, choose YouTube Step 3: In the pop-up YouTube windows, specify the name of your YouTube account, the password, choose the Category and fill in the description and tags of the project. Tick Make this movie more private on the bottom of the window, if possible, to limit those who can view the project. Click Next, and then click Publish. iMovie will automatically export and upload the movie to YouTube. Step 4: Click Tell a Friend to email friends and your family about your film. You are also allowed to copy the URL from Tell a Friend window and paste it into an email you created in your favourite email application if you like. Anyone you send to email to will be able to follow the URL directly to your movie. Note: Videos uploaded to YouTube are limited to ten minutes in length and a file size of 2GB. Solution 3: Upload to iMovie after conversion If neither of the above mentioned method works, there is still a third way to turn to. Sometimes, your iMovie files may not be recognized by YouTube due to the versions of iMovie (settings and functions may varies among versions), video itself (video format difference because of file extension, resolution, video size and length), compatibility (videos that are completely incompatible with YouTube). In this circumstance, the best and reliable method is to convert your iMovie files to YouTube accepted files, iMovie to YouTube converter will be inevitably the ideal choice. iMovie to YouTube converter is an elaborately designed tool for convert iMovie files to YouTube workable WMV, 3GP, AVI, MOV, MP4, FLV, MKV for smooth uploading with hard-to-believe conversion speed and second to none output quality. It can also convert between almost all popular popular file formats like AVI, WMV, MPG, MOV, VOB, DV, MP4, FLV, 3GP, RM, ASF, SWF, MP3, AAC, AC3, AIFF, AMR, WAV, WMA etc so as to put on various portable devices, import to video editing software or play on vast amount video players. iMovie to YouTube converter can also served as an excellent video editing tool to meet your specific program requirements. For example, you can cut your video files to a certain length, or split your video files to smaller ones and select the proper resolution suitable for demands of YouTube by Clip or Settings separately. Crop allows you to cut off unwanted black edges from your videos. Besides, you can also have a good command of the whole process or snapshot your favourite pictures from the preview window. More can be expected if you have a try.

  Read the article

• How to share internet over VPN and inside a virtual machine (Windows)?

  - by mountrix

  ` My final goal is to have a virtual machine at work in which anything that happen inside (tcp, udp, ping, ...) will use the Internet connection of a computer at home. So, if inside this VM should I open an Internet browser to a site such as "show my IP", my home IP should be printed. I am also looking for a way to debug/develop a software inside this VM, but I would like to tunnel only the connections of this software, not the full graphical interface, this is why a Remote Desktop solution won't fit me. The connection between the both computer should be secured somehow, like in a SSH tunnel. This ultimately should allow me to have a portable VM in which I can connect to whatever networks I have access at home, in a secure way. This is my configuration: At work, I have a LAN-connected desktop computer, with Windows 7 Professional Edition as a host [computer W] On this same computer, I have a Virtual Box machine running Windows XP [computer V] At home, I have a laptop computer, running Windows 7 Home Edition [computer H] This laptop is connected to a Livebox 2 broadband modem by Wifi. What I am trying to do is to sit at work in front of the virtual machine [V], and connect to a webpage as if the request was issued from the laptop [H] at home, and the data should be securely tunneled between the both. But if I am using internet directly inside [W], it should use the normal LAN interface at work. To achieve my goal, I first try using VPN, than SSH tunneling, without success. I first tried to install Teamviewer between [W] and [H]. This is working fine, I can send files, share desktop, etc. Teamviewer has a VPN mode that creates a new VPN network interface with its own IP, both on computer [W] and [H]. This allowed me to connect [H] as a network computer inside [W] and I was able to share files, but not to share Internet. At this point, I tried to use from [W] the Internet as if I was at home. I setup a route (using route add from command line in [W]) in order to instruct each packet going to a given website to pass by the new VPN interface on [W], with the hope it will be forwarded to [H], but the webpage was simply inaccessible. I then tried to setup a Windows VPN connection between [W] and [H], using the Windows 7 VPN feature. [H] was the server and [W] the client. But it failed: I got the "Unable to join a remote PC while trying to VPN" 720 Error when I was setting up the client on [W]. I think the problem is the Livebox 2 that could blocks the packets. But I am not sure of this: 1) with Teamviewer it works fine, 2) Livebox 2 has a configuration page for port mapping that gives the proper configuration to map VPN ports as an example so I guess that it should allow it, 3) I opened the ports 1723 (TCP) and 500 (UDP) according to some forums. Virtual box has a network configuration parameter in which I can use the VPN network interface created by Teamviewer as a bridged connection. This is suppose to work in the sense that all packets issued by the virtual machine [V] is supposed to go directly to [H]. But I had no internet connection inside [V]. Using the NAT mode, [V] has internet. For me this is the feature that I look for: filtering all connections from the virtual box application to the VPN network interface, and the remaining should use the normal LAN interface. Apart from the build-in feature of VBox, I even do not know if it is possible to route the packet from a given application to a given interface. Finally I tried also SSH tunneling, but this is not the solution I looked for. Using an external SSH server (Linux), I was able to create a localhost connection on [W] (or [V]), using something like 'ssh -N -D server[H]' in order to allow a web browser located in [W] to connect to any website using the SOCKS 5 proxy created locally (SOCKS is a build-in feature of SSH). But repeating the same operation on windows, using a windows SSH server inside [W] (I tried freeSSHd), it failed: SFTP worked, but not the SOCKS tunneling, it was like the browser in [H] did not find internet. Finally only Teamviewer looked able to create a VPN between [W] and [H], but I am not able to use it, as I want, I mean using the Internet connection of [H] sitting in front of [W]. I also tried to bridge the VPN interface and the wifi interface inside [H], but it blocked my laptop, and I tried also the Internet Connection Sharing, trying to share on [H] the wifi connection over the VPN interface. This fails also, but it seems because Teamviewer actually use the wifi interface to be able to provide the VPN link, so I guess I am creating a recursive loop. I do not know what to try next... Thank you for any advice!!

  Read the article

• FFMPEG Segfault Solutions

  - by Brentley_11

  I'm trying to convert a bunch of movies into h.264 mp4's using FFMPEG. These movies are sourced from various portable camcorders such as the Flip Mino HD and the Kodak ZI8. One issue I'm having with video from the ZI8 is it seems to be causing FFMPEG to segfault. Here is my command: ffmpeg -i 'XmasSailor720p60fps.MOV' -threads 2 -acodec libfaac -ab 96kb -vcodec libx264 -vpre hq -b 500kb -s 484x272 XmasSailor.mp4 Here is the output: FFmpeg version SVN-r20668, Copyright (c) 2000-2009 Fabrice Bellard, et al. built on Dec 2 2009 18:37:34 with gcc 4.2.4 (Ubuntu 4.2.4-1ubuntu4) configuration: --enable-libfaac --enable-libfaad --enable-libmp3lame --enable-libx264 --enable-gpl --enable-nonfree --enable-postproc --enable-pthreads --enable-shared libavutil 50. 5. 1 / 50. 5. 1 libavcodec 52.42. 0 / 52.42. 0 libavformat 52.39. 2 / 52.39. 2 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0. 7. 2 / 0. 7. 2 libpostproc 51. 2. 0 / 51. 2. 0 Seems stream 0 codec frame rate differs from container frame rate: 59.94 (60000/1001) -> 29.97 (30000/1001) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'XmasSailor720p60fps.MOV': Duration: 00:00:05.37, start: 0.000000, bitrate: 12021 kb/s Stream #0.0(eng): Video: h264, yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 11994 kb/s, 29.97 tbr, 90k tbn, 59.94 tbc Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 128 kb/s Metadata major_brand : qt minor_version : 0 compatible_brands: qt comment : KODAK Zi8 Pocket Video Camera comment-eng : KODAK Zi8 Pocket Video Camera [libx264 @ 0x99e1020]using SAR=1/1 [libx264 @ 0x99e1020]using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.1 Cache64 [libx264 @ 0x99e1020]profile High, level 2.1 Output #0, mp4, to 'XmasSailor.mp4': Stream #0.0(eng): Video: libx264, yuv420p, 484x272 [PAR 1:1 DAR 121:68], q=10-51, 500 kb/s, 30k tbn, 29.97 tbc Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 96 kb/s Metadata comment : Encoded with the Statusfirm Video Transcoder Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding [h264 @ 0x99de950]B picture before any references, skipping [h264 @ 0x99de950]decode_slice_header error [h264 @ 0x99de950]no frame! Error while decoding stream #0.0 [h264 @ 0x99de950]B picture before any references, skipping [h264 @ 0x99de950]decode_slice_header error [h264 @ 0x99de950]no frame! Error while decoding stream #0.0 frame= 20 fps= 0 q=13797729.0 size= 0kB time=0.66 bitrate= 0.6kbits/s frame= 39 fps= 37 q=13797729.0 size= 0kB time=1.30 bitrate= 0.3kbits/s frame= 48 fps= 30 q=33.0 size= 11kB time=0.10 bitrate= 903.0kbits/s frame= 58 fps= 27 q=31.0 size= 22kB time=0.43 bitrate= 421.0kbits/s frame= 67 fps= 25 q=29.0 size= 41kB time=0.73 bitrate= 462.6kbits/s frame= 75 fps= 23 q=29.0 size= 59kB time=1.00 bitrate= 486.7kbits/s frame= 83 fps= 22 q=29.0 size= 81kB time=1.27 bitrate= 521.9kbits/s frame= 90 fps= 21 q=29.0 size= 97kB time=1.50 bitrate= 530.1kbits/s frame= 98 fps= 20 q=29.0 size= 114kB time=1.77 bitrate= 526.9kbits/s frame= 106 fps= 20 q=29.0 size= 134kB time=2.04 bitrate= 537.7kbits/s frame= 114 fps= 19 q=29.0 size= 150kB time=2.30 bitrate= 533.7kbits/s frame= 122 fps= 19 q=29.0 size= 172kB time=2.57 bitrate= 547.8kbits/s frame= 130 fps= 19 q=29.0 size= 193kB time=2.84 bitrate= 557.5kbits/s frame= 136 fps= 18 q=29.0 size= 211kB time=3.04 bitrate= 570.0kbits/s frame= 144 fps= 18 q=29.0 size= 242kB time=3.30 bitrate= 599.5kbits/s frame= 152 fps= 17 q=30.0 size= 261kB time=3.57 bitrate= 598.6kbits/s frame= 157 fps= 15 q=-1.0 Lsize= 368kB time=5.21 bitrate= 579.3kbits/s video:302kB audio:61kB global headers:0kB muxing overhead 1.416371% [libx264 @ 0x99e1020]frame I:1 Avg QP:27.22 size: 8720 [libx264 @ 0x99e1020]frame P:48 Avg QP:25.15 size: 3759 [libx264 @ 0x99e1020]frame B:108 Avg QP:30.10 size: 1105 [libx264 @ 0x99e1020]consecutive B-frames: 0.6% 11.5% 28.8% 59.0% [libx264 @ 0x99e1020]mb I I16..4: 28.5% 47.6% 23.9% [libx264 @ 0x99e1020]mb P I16..4: 0.8% 1.3% 0.5% P16..4: 50.6% 17.7% 13.1% 0.0% 0.0% skip:15.9% [libx264 @ 0x99e1020]mb B I16..4: 0.2% 0.3% 0.1% B16..8: 44.0% 1.2% 2.6% direct: 5.1% skip:46.5% L0:45.5% L1:51.0% BI: 3.5% [libx264 @ 0x99e1020]final ratefactor: 23.51 [libx264 @ 0x99e1020]8x8 transform intra:49.9% inter:67.9% [libx264 @ 0x99e1020]direct mvs spatial:98.1% temporal:1.9% [libx264 @ 0x99e1020]coded y,uvDC,uvAC intra: 54.7% 76.1% 41.4% inter: 17.1% 24.4% 7.8% [libx264 @ 0x99e1020]i16 v,h,dc,p: 18% 52% 5% 25% [libx264 @ 0x99e1020]i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 12% 22% 9% 7% 10% 10% 9% 8% 13% [libx264 @ 0x99e1020]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 13% 18% 8% 8% 10% 13% 10% 9% 12% [libx264 @ 0x99e1020]Weighted P-Frames: Y:10.4% [libx264 @ 0x99e1020]ref P L0: 60.2% 15.3% 11.0% 7.6% 5.2% 0.7% [libx264 @ 0x99e1020]ref B L0: 72.6% 15.6% 11.8% [libx264 @ 0x99e1020]kb/s:471.17 Segmentation fault I'm wondering if anyone else has ran into similar issues. I wasn't able to find anything helpful via Google. Another question I have is if anyone knows of a company that offers paid support for FFMPEG. Thank you for your time.

  Read the article

• FFMPEG Segfault Solutions

  - by Brentley_11

  I'm trying to convert a bunch of movies into h.264 mp4's using FFMPEG. These movies are sourced from various portable camcorders such as the Flip Mino HD and the Kodak ZI8. One issue I'm having with video from the ZI8 is it seems to be causing FFMPEG to segfault. Here is my command: ffmpeg -i 'XmasSailor720p60fps.MOV' -threads 2 -acodec libfaac -ab 96kb -vcodec libx264 -vpre hq -b 500kb -s 484x272 XmasSailor.mp4 Here is the output: FFmpeg version SVN-r20668, Copyright (c) 2000-2009 Fabrice Bellard, et al. built on Dec 2 2009 18:37:34 with gcc 4.2.4 (Ubuntu 4.2.4-1ubuntu4) configuration: --enable-libfaac --enable-libfaad --enable-libmp3lame --enable-libx264 --enable-gpl --enable-nonfree --enable-postproc --enable-pthreads --enable-shared libavutil 50. 5. 1 / 50. 5. 1 libavcodec 52.42. 0 / 52.42. 0 libavformat 52.39. 2 / 52.39. 2 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0. 7. 2 / 0. 7. 2 libpostproc 51. 2. 0 / 51. 2. 0 Seems stream 0 codec frame rate differs from container frame rate: 59.94 (60000/1001) -> 29.97 (30000/1001) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'XmasSailor720p60fps.MOV': Duration: 00:00:05.37, start: 0.000000, bitrate: 12021 kb/s Stream #0.0(eng): Video: h264, yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 11994 kb/s, 29.97 tbr, 90k tbn, 59.94 tbc Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 128 kb/s Metadata major_brand : qt minor_version : 0 compatible_brands: qt comment : KODAK Zi8 Pocket Video Camera comment-eng : KODAK Zi8 Pocket Video Camera [libx264 @ 0x99e1020]using SAR=1/1 [libx264 @ 0x99e1020]using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.1 Cache64 [libx264 @ 0x99e1020]profile High, level 2.1 Output #0, mp4, to 'XmasSailor.mp4': Stream #0.0(eng): Video: libx264, yuv420p, 484x272 [PAR 1:1 DAR 121:68], q=10-51, 500 kb/s, 30k tbn, 29.97 tbc Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 96 kb/s Metadata comment : Encoded with the Statusfirm Video Transcoder Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding [h264 @ 0x99de950]B picture before any references, skipping [h264 @ 0x99de950]decode_slice_header error [h264 @ 0x99de950]no frame! Error while decoding stream #0.0 [h264 @ 0x99de950]B picture before any references, skipping [h264 @ 0x99de950]decode_slice_header error [h264 @ 0x99de950]no frame! Error while decoding stream #0.0 frame= 20 fps= 0 q=13797729.0 size= 0kB time=0.66 bitrate= 0.6kbits/s frame= 39 fps= 37 q=13797729.0 size= 0kB time=1.30 bitrate= 0.3kbits/s frame= 48 fps= 30 q=33.0 size= 11kB time=0.10 bitrate= 903.0kbits/s frame= 58 fps= 27 q=31.0 size= 22kB time=0.43 bitrate= 421.0kbits/s frame= 67 fps= 25 q=29.0 size= 41kB time=0.73 bitrate= 462.6kbits/s frame= 75 fps= 23 q=29.0 size= 59kB time=1.00 bitrate= 486.7kbits/s frame= 83 fps= 22 q=29.0 size= 81kB time=1.27 bitrate= 521.9kbits/s frame= 90 fps= 21 q=29.0 size= 97kB time=1.50 bitrate= 530.1kbits/s frame= 98 fps= 20 q=29.0 size= 114kB time=1.77 bitrate= 526.9kbits/s frame= 106 fps= 20 q=29.0 size= 134kB time=2.04 bitrate= 537.7kbits/s frame= 114 fps= 19 q=29.0 size= 150kB time=2.30 bitrate= 533.7kbits/s frame= 122 fps= 19 q=29.0 size= 172kB time=2.57 bitrate= 547.8kbits/s frame= 130 fps= 19 q=29.0 size= 193kB time=2.84 bitrate= 557.5kbits/s frame= 136 fps= 18 q=29.0 size= 211kB time=3.04 bitrate= 570.0kbits/s frame= 144 fps= 18 q=29.0 size= 242kB time=3.30 bitrate= 599.5kbits/s frame= 152 fps= 17 q=30.0 size= 261kB time=3.57 bitrate= 598.6kbits/s frame= 157 fps= 15 q=-1.0 Lsize= 368kB time=5.21 bitrate= 579.3kbits/s video:302kB audio:61kB global headers:0kB muxing overhead 1.416371% [libx264 @ 0x99e1020]frame I:1 Avg QP:27.22 size: 8720 [libx264 @ 0x99e1020]frame P:48 Avg QP:25.15 size: 3759 [libx264 @ 0x99e1020]frame B:108 Avg QP:30.10 size: 1105 [libx264 @ 0x99e1020]consecutive B-frames: 0.6% 11.5% 28.8% 59.0% [libx264 @ 0x99e1020]mb I I16..4: 28.5% 47.6% 23.9% [libx264 @ 0x99e1020]mb P I16..4: 0.8% 1.3% 0.5% P16..4: 50.6% 17.7% 13.1% 0.0% 0.0% skip:15.9% [libx264 @ 0x99e1020]mb B I16..4: 0.2% 0.3% 0.1% B16..8: 44.0% 1.2% 2.6% direct: 5.1% skip:46.5% L0:45.5% L1:51.0% BI: 3.5% [libx264 @ 0x99e1020]final ratefactor: 23.51 [libx264 @ 0x99e1020]8x8 transform intra:49.9% inter:67.9% [libx264 @ 0x99e1020]direct mvs spatial:98.1% temporal:1.9% [libx264 @ 0x99e1020]coded y,uvDC,uvAC intra: 54.7% 76.1% 41.4% inter: 17.1% 24.4% 7.8% [libx264 @ 0x99e1020]i16 v,h,dc,p: 18% 52% 5% 25% [libx264 @ 0x99e1020]i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 12% 22% 9% 7% 10% 10% 9% 8% 13% [libx264 @ 0x99e1020]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 13% 18% 8% 8% 10% 13% 10% 9% 12% [libx264 @ 0x99e1020]Weighted P-Frames: Y:10.4% [libx264 @ 0x99e1020]ref P L0: 60.2% 15.3% 11.0% 7.6% 5.2% 0.7% [libx264 @ 0x99e1020]ref B L0: 72.6% 15.6% 11.8% [libx264 @ 0x99e1020]kb/s:471.17 Segmentation fault I'm wondering if anyone else has ran into similar issues. I wasn't able to find anything helpful via Google. Another question I have is if anyone knows of a company that offers paid support for FFMPEG. Thank you for your time.

  Read the article

• CodePlex Daily Summary for Saturday, March 06, 2010

  CodePlex Daily Summary for Saturday, March 06, 2010New ProjectsAgr.CQRS: Agr.CQRS is a C# framework for DDD applications that use the Command Query Responsibility Segregation pattern (CQRS) and Event Sourcing. BigDays 2010: Big>Days 2010BizTalk - Controlled Admin: Hi .NET folks, I am planning to start project on a Controlled BizTalk Admin tool. This tool will be useful for the organizations which have "Sh...Blacklist of Providers: Blacklist of Providers - the application for department of warehouse logistics (warehouse) at firms.Career Vector: A job board software.Chargify Demo: This is a sample website for ChargifyConceptual: Concept description and animationEric Hexter: My publicly available source code and examplesFluentNHibernate.Search: A Fluent NHibernate.Search mapping interface for NHibernate provider implementation of Lucene.NET.FreelancePlanner: FreelancePlanner is a project tracking tool for freelance translators.HTMLx - JavaScript on the Server for .NET: HTMLx is a set of libraries based on ASP.NET engine to provide JavaScript programmability on the server side. It allows Web developers to use JavaS...IronMSBuild: IronMSBuild is a custom MSBuild Task, which allows you to execute IronRuby scripts. // have to provide some examples LINQ To Blippr: LINQ to Blippr is an open source LINQ Provider for the micro-reviewing service Blippr. LINQ to Blippr makes it easier and more efficent for develo...Luk@sh's HTML Parser: library that simplifies parsing of the HTML documents, for .NETMeta Choons: Unsure as yet but will be a kind of discogs type site but different..NetWork2: NetWork2Regular Expression Chooser: Simple gui for choosing the regular expressions that have become more than simple.See.Sharper: Hopefully useful C# extensions.SharePoint 2010 Toggle User Interface: Toggle the SharePoint 2010 user interface between the new SharePoint 2010 user interface and SharePoint 2007 user interface.Silverlight DiscussionBoard for SharePoint: This is a sharepoint 3.0 webpart that uses a silverlight treeview to display metadata about sharepoint discussions anduses the html bridge to show...Simple Sales Tracking CRM API Wrapper: The Simple Sales Tracking API Wrapper, enables easy extention development and integration with the hosted service at http://www.simplesalestracking...Syntax4Word: A syntax addin for word 2007.TortoiseHg installer builder: TortoiseHg and Mercurial installer builder for Windowsunbinder: Model un binding for route value dictionariesWindows Workflow Foundation on Codeplex: This site has previews of Workflow features which are released out of band for the purposes of adoption and feedback.XNA RSM Render State Manager: Render state management idea for XNA games. Enables isolation between draw calls whilst reducing DX9 SetRenderState calls to the minimum.New ReleasesAgr.CQRS: Sourcecode package: Agr.CQRS is a C# framework for DDD applications that use the Command Query Responsibility Segregation pattern (CQRS) and Event Sourcing. This dow...Book Cataloger: Preview 0.1.6a: New Features: Export to Word 2007 Bibliography format Dictionary list editors for Binding, Condition Improvements: Stability improved Content ...Braintree Client Library: Braintree-1.1.2: Includes minor enhancements to CreditCard and ValidationErrors to support upcoming example application.CassiniDev - Cassini 3.5 Developers Edition: CassiniDev v3.5.0.5: For usage see Readme.htm in download. New in CassiniDev v3.5.0.5 Reintroduced the Lib project and signed all Implemented the CassiniSqlFixture -...Composure: Calcium-64420-VS2010rc1.NET4.SL3: This is a simple conversion of Calcium (rev 64420) built in VS2010 RC1 against .NET4 and Silverlight 3. No source files were changed and ALL test...Composure: MS AJAX Library (46266) for VS2010 RC1 .NET4: This is a quick port of Microsoft's AJAX Library (rev 46266) for Visual Studio 2010 RC1 built against .NET 4.0. Since this conversion was thrown t...Composure: MS Web Test Lightweight for VS2010 RC1 .NET4: A simple conversion of Microsoft's Web Test Lightweight for Visual Studio 2010 RC1 .NET 4.0. This is part of a larger "special request" conversion...CoNatural Components: CoNatural Components 1.5: Supporting new data types: Added support for binary data types -> binary, varbinary, etc maps to byte[] Now supporting SQL Server 2008 new types ...Extensia: Extensia 2010-03-05: Extensia is a very large list of extension methods and a few helper types. Some extension methods are not practical (e.g. slow) whilst others are....Fluent Assertions: Fluent Assertions release 1.1: In this release, we've worked hard to add some important missing features that we really needed, and also improve resiliance against illegal argume...Fluent Ribbon Control Suite: Fluent Ribbon Control Suite 1.0 RC: Fluent Ribbon Control Suite 1.0 (Release Candidate)Includes: Fluent.dll (with .pdb and .xml, debug and release version) Showcase Application Sa...FluentNHibernate.Search: 0.1 Beta: First beta versionFolderSize: FolderSize.Win32.1.0.7.0: FolderSize.Win32.1.0.6.0 A simple utility intended to be used to scan harddrives for the folders that take most place and display this to the user...Free Silverlight & WPF Chart Control - Visifire: Silverlight and WPF Step Line Chart: Hi, With this release Visifire introduces Step Line Chart. This release also contains fix for the following issues: * In WPF, if AnimatedUpd...Html to OpenXml: HtmlToOpenXml 1.0: The dll library to include in your project. The dll is signed for GAC support. Compiled with .Net 3.5, Dependencies on System.Drawing.dll and Docu...Line Counter: 1.5.1: The Line Counter is a tool to calculate lines of your code files. The tool was written in .NET 2.0. Line Counter 1.5.1 Added outline icons and lin...Lokad Cloud - .NET O/C mapper (object to cloud) for Windows Azure: Lokad.Cloud v1.0.662.1: You can get the most recent release directly from the build server at http://build.lokad.com/distrib/Lokad.Cloud/Lost in Translation: LostInTranslation v0.2: Alpha release: function complete but not UX complete.MDownloader: MDownloader-0.15.7.56349: Supported large file resumption. Fixed minor bugs.Mini C# Lab: Mini CSharp Lab Ver 1.4: The primary new feature of Ver 1.4 is batch mode! Now you can run Mini C# Lab program as a scheduled task, no UI interactivity is needed. Here ar...Mobile Store: First drop: First droppatterns & practices SharePoint Guidance: SPG2010 Drop6: SharePoint Guidance Drop Notes Microsoft patterns and practices ****************************************** ***************************************...Picasa Downloader: PicasaDownloader (41446): Changelog: Replaced some exception messages by a Summary dialog shown after downloading if there have been problems. Corrected the Portable vers...Pod Thrower: Version 1: This is the first release, I'm sure there are bugs, the tool is fully functional and I'm using it currently.PowerShell Provider BizTalk: BizTalkFactory PowerShell Provider - 1.1-snapshot: This release constitutes the latest development snapshot for the Provider. Please, leave feedback and use the Issue Tracker to help improve this pr...Resharper Settings Manager: RSM 1.2.1: This is a bug fix release. Changes Fixed plug-in crash when shared settings file was modified externally.Reusable Library Demo: Reusable Library Demo v1.0.2: A demonstration of reusable abstractions for enterprise application developerSharePoint 2010 Toggle User Interface: SharePoint Toggle User Interface: Release 1.0.0.0Starter Kit Mytrip.Mvc.Entity: Mytrip.Mvc.Entity(net3.5 MySQL) 1.0 Beta: MySQL VS 2008 EF Membership UserManager FileManager Localization Captcha ClientValidation Theme CrossBrowserTortoiseHg: TortoiseHg 1.0: http://bitbucket.org/tortoisehg/stable/wiki/ReleaseNotes Please backup your user Mercurial.ini file and then uninstall any 0.9.X release before in...Visual Studio 2010 and Team Foundation Server 2010 VM Factory: Rangers Virtualization Guidance: Rangers Virtualization Guidance Focused guidance on creating a Rangers base image manually and introduction of PowerShell scripts to automate many ...Visual Studio DSite: Advanced Email Program (Visual Basic 2008): This email program can send email to any one using your email username and email credentials. The email program can also attatch attactments to you...WPF ShaderEffect Generator: WPF ShaderEffect Generator 1.6: Several improvements and bug fixes have gone into the comment parsing code for the registers. The plug-in should now correctly pay attention to th...WSDLGenerator: WSDLGenerator 0.0.0.3: - Fixed SharePoint generated *.wsdl.aspx file - Added commandline option -wsdl which does only generate the wsdl file.Most Popular ProjectsMetaSharpRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NETLiveUpload to FacebookMicrosoft SQL Server Community & SamplesMost Active ProjectsUmbraco CMSRawrSDS: Scientific DataSet library and toolsBlogEngine.NETjQuery Library for SharePoint Web Servicespatterns & practices – Enterprise LibraryIonics Isapi Rewrite FilterFluent AssertionsComposureDiffPlex - a .NET Diff Generator

  Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68  | Next Page >