Search Results

Search found 13082 results on 524 pages for 'recovery mode'.

Page 63/524 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >

  • no administrator password for Windows 7

    - by huskergirl78
    I'm a secretary and my boss set up my new Windows 7 OptiPlex 7010 (Dell) computer for me while I was on vacation (he does not remember setting any "administrator" password). We are a small office so there is no system password set, either. I've used it for 6 months, all the while I couldn't access network drives, etc., without an administrator password. It was annoying, but I could still get my work done. Finally, on a slow day I took it upon myself to "fix" the problem, and in all my infinite wisdom, I managed to change my user account from administrator to standard user, so now I really can't do anything. I can't download or install any programs, move or rename files, etc. I tried the Dell suggested solution, but the BIOS tells me there is no password set, so it has to be a Windows 7 problem. All the solutions I have come across require an administrator password to let me do them. What can I do to find out the admin password so I can use my own darn computer!? Is there a default admin password?

    Read the article

  • Console session stuck ESXi unsuported mode

    - by Datapimp23
    Hi guys, I was editing the /etc/inetd.conf file in VI to enable SSH and when I believed to have saved it. I entered cat and pressed enter accidently. Now I seem to be stuck in a black screen where I can enter characters but can't exit from it. How would I go on my way to get back to the normal console without rebooting the ESXi. Thanks

    Read the article

  • Recover data from Dynamic Disk (MBR) bigger than 2TB

    - by Helder
    Here is the situation: Promise Array FastTrak TX4310 with 3 disks (750 GB each) in RAID5. This comes to around 1500 GB of data. Last week I had the idea of expanding the RAID with an additional 750 GB disk. This would bring the volume to around 2250 GB. I plugged the disk and used the Webpam software to do the RAID expansion. However, I didn't count with the MBR 2TB limit, as I didn't remembered that the disk was using MBR instead of GPT and I didn't check it prior to the expansion. After a couple of days of expansion, today when I got home, the disk in Windows disk manager showed the message "Invalid disk" and when I try to activate it, it says "The operation is not allowed on the Invalid pack". From what I figured, the logical volume on the RAID expanded, and passed that info to the Windows layer and I ended up with an "larger than 2TB" MBR disk. I'm hopping that somehow I can still recover some data from this, and I was wondering if I can "rewrite" the MBR structure back to the 1500 GB partition size, so I can access the partition in Windows. Right now I'm doing an "Analyse" with TestDisk, as I hope the program will pickup the old 1500 structure and allow me to somehow revert back to it. I think that even though the Logical Drive in the RAID is bigger than the 2TB, I can somehow correct the MBR to show the 1500 GB partition again. I had a similar problem once, and I was able to recover the data using a similar method. What do you guys think? Is it a dead end? Am I totally screwed because there is the extra RAID layer that I'm not counting? Or is there other way to move with this? Thanks all!

    Read the article

  • wusa in server 2008 R2

    - by Jack
    I need to use wusa to uninstall a particular update that is causing a reboot loop. I can access winre and dism, but wusa gives command not found. Does wusa not come with r2, or is it not available in the built-in WinRE or what?

    Read the article

  • General High-Level Assessment

    - by tcarper
    Guys and Gals, I've been tasked with a doozy of an assignment. The objective is something akin to "laying of hands" on several database servers which work in concert to provide data to various Web, Client-Server and Tablet-Sync'd distributed Client-Server programs. More specifically, I've been asked to come up with a "Maintenance Plan" which includes recommendations for future work to improve these machines' performance/reliability/security/etc. Might there be some good articles on teh interwebs ya'll could point me towards which would give me some good basis to start? Articles describing "These are the top 4 overarching categories and this is how you should proceed when drilling down on each of them" sort-of-thing would be fabulous. The Databases are all SQL 2005, however the compatibility level is 80 and they were originally created with ERwin based on SQL 6.5. The OSs are all Windows Server 2003. Thanks all! Tim

    Read the article

  • XP can't read data from transferred HD

    - by Alexander Miller
    Computer A, running XP, died. XP was installed on a fresh HD in computer B. Slaved data-backup HD from A was installed as slave on B. B will not read it; shows only 2 folders, Recycler and System Volume Info. All of these are older machines with IDE drives. What's going on & how can I read/transfer the data from the transferred drive? This was only a trial run. Actually I will need to transfer the master HD from A - which has XP on it - and read from its data partition because (blush) the backup drive was not up to date.

    Read the article

  • My WD passport detected but not shown on my computer

    - by Rakesh Patel
    1TB WD harddisk is detected in laptop but drives not visible on my computer. Under disk managment drives shown without letters. Right clicking on these drives give 2 options: Delete volume Help. The same harddisk was running well on the same laptop a day before. It is also showing full size of hard drives, Healthy (Primary Partition) etc. (this happened after harddisk usage by guest). Harddisk is new only (about 5 month usage) Please suggest: Is there hardware related problem inside harddisk, if so is it repairable? Is there any option to recover data?

    Read the article

  • should i and how do i backup my database for a webapp that is hosted on amazon ec2 server?

    - by user8184
    I set up an amazon ec2 instance using ubuntu server edition. I install LAMP stack on it. I did up a php web app running on mysql. I have not officially launched, but I need to know this before launching. Should I backup my database data? If so, how should I do it as cost effective as possible? Previously for another web app, i wrote a perl or bash script (cannot remember) that will be executed by cron on a daily basis. The script will then backup the database into a single .sql file and send as email attachment to my gmail account. That web app was on shared hosting hence, I was quite sure i needed to do backup of my database. My files are on git repo so I am not worried about that. Please advise. I am totally unfamiliar with AWS. Only know as much as setting up an account. That is all. Thank you.

    Read the article

  • Haproxy Slow Reload in DB Mode

    - by com
    Recently I started using great tool for load balancing - Haproxy. There is only one disturbing thing that I cannot figure out how to deal with it. We use haproxy for load balancing mysql traffic. When there is a lot of traffic and many connection it takes ages for haproxy to reload (~ 30 min), with less traffic it doest reload within 1 min. I do reload with: service haproxy reload Of course if I need to do an urgent change in configuration I expect haproxy to do reload very fast. Killing haproxy instances waiting for disconnection causes to disconnection of msyql connections. It looks like that I made mistake in settings of haproxy or in settings of application. If you know how to solve this please help me. Thanks!

    Read the article

  • In vim, prevent caret moving back when I leave edit mode?

    - by romkyns
    In vim, if I enter and leave edit mode without doing anything, the caret ends up one character to the left. And if I enter and leave append mode, the caret moves forwards and then backwards. Any way to configure vim to leave the caret alone in these cases? Ideally I just want to always enter append mode, but without moving the caret when I enter or exit the mode. (Currently I usually use insert mode because it doesn't mess up my caret position upon entry. That is, except when I need to append to the end of the line, in which case I swear at vim for behaving in such an archaic fashion, press Esc and enter append mode.)

    Read the article

  • How do I make a partition usable in windows 7 after power loss?

    - by user1306322
    A few days ago I was installing some software and power went down. When I rebooted, the partition to which the software was installed was not accessible. Disk manager shows that it's there, but doesn't show type, if it's healthy and gives me an error when trying to read its properties. The problem seems to be common after power loss, people recommend solving it by assigning a letter to the partition via DiskPart utility, but partition isn't listed in my case. I can access that partition with bootable OSs (like bootable Ubuntu or winXP) and all the files are there, but another installation of Windows 7 gives me the same results as the original. I could just copy all data to another disk if there was enough space, but unfortunately the size of partition I'm having problems with is 1.1TB. How do I regain access to the partition in my original Windows 7 installation without losing any data?

    Read the article

  • ext4: error loading journal

    - by cloudyOutside
    I have an external hard drive with two partitions: A small FAT32 which is mostly empty and works fine and a large ext4 with tons of data, most of which isn't backed up. The ext4 is visible, but can't be mounted. I get an "error loading journal" error. The drive is a Western Digital Caviar Blue 500GB. Roughly 30GB of that is FAT32 and the rest is the ext4. The light on the enclosure turns red when reading from the bad partition. It was made by Cavalry. There wasn't any warning, but coincidentally, I've been thinking lately that I should get two large capacity drives for real backups. Is there anything that can be done? I'm not even sure I have enough storage to backup everything even if it is redeemable.

    Read the article

  • Any way to recover ext4 filesystems from a deleted LVM logical volume?

    - by Vegar Nilsen
    The other day I had a proper brain fart moment while expanding a disk on a Linux guest under Vmware. I stretched the Vmware disk file to the desired size and then I did what I usually do on Linux guests without LVM: I deleted the LVM partition and recreated it, starting in the same spot as the old one, but extended to the new size of the disk. (Which will be followed by fsck and resize2fs.) And then I realized that LVM doesn't behave the same way as ext2/3/4 on raw partitions... After restoring the Linux guest from the most recent backup (taken only five hours earlier, luckily) I'm now curious on how I could have recovered from the following scenario. It's after all virtually guaranteed that I'll be a dumb ass in the future as well. Virtual Linux guest with one disk, partitioned into one /boot (primary) partition (/dev/sda1) of 256MB, and the rest in a logical, extended partition (/dev/sda5). /dev/sda5 is then setup as a physical volume with pvcreate, and one volume group (vgroup00) created on top of it with the usual vgcreate command. vgroup00 is then split into two logical volumes root and swap, which are used for / and swap, logically. / is an ext4 file system. Since I had backups of the broken guest I was able to recreate the volume group with vgcfgrestore from the backup LVM setup found under /etc/lvm/backup, with the same UUID for the physical volume and all that. After running this I had two logical volumes with the same size as earlier, with 4GB free space where I had stretched the disk. However, when I tried to run "fsck /dev/mapper/vgroup00-root" it complained about a broken superblock. I tried to locate backup superblocks by running "mke2fs -n /dev/mapper/vgroup00-root" but none of those worked either. Then I tried to run TestDisk but when I asked it to find superblocks it only gave an error about not being able to open the file system due to a broken file system. So, with the default allocation policy for LVM2 in Ubuntu Server 10.04 64-bit, is it possible that the logical volumes are allocated from the end of the volume group? That would definitely explain why the restored logical volumes didn't contain the expected data. Could I have recovered by recreating /dev/sda5 with exactly the same size and disk position as earlier? Are there any other tools I could have used to find and recover the file system? (And clearly, the question is not whether or not I should have done this in a different way from the start, I know that. This is a question about what to do when shit has already hit the fan.)

    Read the article

  • How can I recover my ext4 ubuntu partition from my windows parition?

    - by officespace
    I dual boot windows and ubuntu 10.04. I accidentally did an rm -r * in my home directory and deleted a bunch of files and folders that I need to recover. How can I recover these files from my windows xp partition? If there's isn't a way to do this from windows, what's the best way to do it in ubuntu? I'd prefer a graphical interface if that's possible. I appreciate the help.

    Read the article

  • Mounting LVM2 volume with XFS filesystem

    - by Chris
    Unfortunately I'm not able to access the data on my NAS anymore. I can't figure out why this is the case as I haven't changed anything. So I plugged one of the harddisks in my computer to access the data. What I did: kpartx -a /dev/sdc Now I should be able to access /dev/mapper/vg001-lv001 When trying to mount it I get: sudo mount -t xfs /dev/mapper/vg001-lv001 /home/user/mnt mount: /dev/mapper/vg001-lv001: can't read superblock Now I did a parted -l which gave me Modell: Linux device-mapper (linear) (dm) Festplatte /dev/mapper/vg001-lv001: 498GB Sektorgröße (logisch/physisch): 512B/512B Partitionstabelle: loop Number Begin End Size Filesystem Flags 1 0,00B 498GB 498GB xfs Does anybody have a solution how to recover the data?

    Read the article

  • Rsync and Lazy mode ?

    - by fabien-barbier
    Since transferring or copying a file that is being used sometimes causes corruption of the transferred file, can we define a time interval in which Rsync checks each file in a given directory to see if there is a change within that time interval ? Files that are not changed during that interval will be transferred, while those that have changes will not. Can I do that with rsync ? Or another tool ? Is there a script to add this functionality to Rsync ? Thanks

    Read the article

  • Mac OS X - Could not start Terminal.app - shell has illegal value

    - by chemm
    I can not run the Terminal.app after rolling back my system from time machine. Mac OS X Version 10.6.2 It displays the following error. "Your are not authorized to run this application" "The administrator has set your shell to an illegal value" After that I have deleted the file ~/Library/Preferences/com.apple.Terminal.plist But the same message is displayed. I have repaired all system rights with the DiskUtility but that did not help.

    Read the article

  • How can I read a reel-to-reel tape from the 1970s?

    - by Joe Wreschnig
    A close friend of my mother worked at DEC in the 1970s and 1980s. She recently passed away, and in sorting through her estate, my mother discovered some reel-to-reel magnetic tape. We are curious about what might be on it. I haven't yet seen a picture of it, but Wikipedia tells me this is most likely DECtape. Is there any chance the data on it is still good? It was not preserved with great care, but as far as we know it has also never been particularly abused. Just left in a box and moved a few times. If the data is still valid, do we need to dig up a PDP or VAX or read it, or is there a more modern option?

    Read the article

  • vSphere Promiscuous mode only receiving packets one way from network switch

    - by steve.lippert
    We have two network switches, a POE switch (SwitchA) to power our phones / users computers and a non-POE switch (SwitchB for the rest network.) Each switch is setup to do port mirroring to support our VoIP recording system. SwitchA does port mirroring on specific ports if we need to record a user. SwitchB mirrors one port to monitor our work at home users (Internet comes in from managed router, to switch, back out to our firewall.) These two port mirroring setups feed into one vmware vSphere 4.1 server, it has four total physical cards. The other two NICs feed into an unmanaged switch for connecting to the rest of the network. Once into the vSphere server all network ports go into a vSwitch, and then one of the servers (Windows 2008 R2) sniffs them out and does its thing. Everything is working fine and dandy from SwitchB. But on SwitchA we only receive one side of the VoIP packets (going out to the phone, nothing coming in from the phone). Troubleshooting steps I have taken so far: I hooked up my laptop to the monitor port on SwitchB and I see both sides of the packets. I swapped which network interface is plugged into the monitor port on SwitchA. Because everything feeds into one vSwitch / vNetwork and both sides of the conversation arrive just fine from SwitchB I believe everything is configured correctly on the vSphere server/guest. What could be causing one way packets to arrive on my guest machine from only one interface, but not the other? Could a bad cable be causing the problems from SwitchB?

    Read the article

  • How do I recover jegs with zero bytes?

    - by Jill
    I downloaded some wedding photos into my external drive about a month ago. A total of 3 cards were downloaded into 3 different files. The first file lists all of the photos, about 600 images, but they have zero bytes. The other 2 files are fine. I can't recover the compact flash card because I have used it too many times since then. Is there any way to recover the images on my drive?

    Read the article

  • Updating windows xp hard drive controller from ubuntu live disk

    - by Joel
    The problem: When booting, I get a blue screen shortly after the Windows XP logo splash screen. The error code is 7b, and the second hex number is 0xC0000034. Based on this link (item 7) it appears the driver should be updated. Oddly, I made no changes to the drivers recently. I suspect it was something in a windows update or the newest upgrade of my antivirus (eset). But I digress. The BSOD makes me unable to boot into Windows at all, so I can't update the driver from there. I've run various bios-level diagnostics (including full surface scan) and the hd looks good. I'm also able to boot to an old ubuntu disk and read files from the hd. The question: Based on the above, it appears that I need to update the Windows hard drive controller from the ubuntu live disk. How do I do that?

    Read the article

  • Looking for fault-tolerant, multi-CD/DVD burning software

    - by MichaelKay
    A few years back, I saw an open-source application that created fault-tolerant, multi-CD backup sets. The thought was that if a few sectors went bad on one CD, the data could be reconstructed from others similar to a RAID 5 hard-drive setup. I did some searching and I could not find the application again. Does anyone know of a application that works in this manner. It needs to work with both CDs & DVDs. Linux or Windows will be OK.

    Read the article

  • Error when mount the database in exchange 2010 SP1

    - by user64060
    Hi, My company have two exchange 2010 SP1 servers with DAG configuration with OS widows server 2008 R2 in testing entironment. Today i want to test my backup possibility, so i restore the backup data to another location not original location. I dismount the database and then delete the all files under the database location. last I copy back the files from back up location to database location. When i want to mount the database. It will come out the below error! -------------------------------------------------------- Microsoft Exchange Error -------------------------------------------------------- Failed to mount database 'mail2'. mail2FailedError: Couldn't mount the database that you specified. Specified database: mail2; Error code: An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=1011) [Database: mail2, Server: mail2.e0594.cn]. An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=1011) [Database: mail2, Server: mail2.e0594.cn] An Active Manager operation failed. Error: Operation failed with message: MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=1011) [Server: mail2.e0594.cn] MapiExceptionCallFailed: Unable to mount database. (hr=0x80004005, ec=1011) Any suggestion? Thanks!

    Read the article

  • Likelihood of a hard drive PCB replacement working?

    - by Grant Limberg
    I have a 1.5TB Seagate 7200.11 that died. The platter still spins up initially when attached to a machine, but then the drive clicks and spins down. Then the cycle repeats. I've found a few sites that sell replacement PCBs, however I don't know if the PCB is the issue, or something else. Given the symptoms above, is it at all likely that a PCB replacement would help? If not, I won't waste my money on the PCB replacement. Note: I put the drive in an external ESATA controller and tried hooking it up to a Linux box here at work and got some error messages in the logs. I can post them if anyone thinks it will help in determining whether a PCB swap would fix the problem I'm running into.

    Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >