Search Results

Search found 1998 results on 80 pages for 'reply'.

Page 63/80 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >

  • A more elegant way of embedding a SOAP security header in Silverlight 4

    - by Your DisplayName here!
    The current situation with Silverlight is, that there is no support for the WCF federation binding. This means that all security token related interactions have to be done manually. Requesting the token from an STS is not really the bad part, sending it along with outgoing SOAP messages is what’s a little annoying. So far you had to wrap all calls on the channel in an OperationContextScope wrapping an IContextChannel. This “programming model” was a little disruptive (in addition to all the async stuff that you are forced to do). It seems that starting with SL4 there is more support for traditional WCF extensibility points – especially IEndpointBehavior, IClientMessageInspector. I never read somewhere that these are new features in SL4 – but I am pretty sure they did not exist in SL3. With the above mentioned interfaces at my disposal, I thought I have another go at embedding a security header – and yeah – I managed to make the code much prettier (and much less bizarre). Here’s the code for the behavior/inspector: public class IssuedTokenHeaderInspector : IClientMessageInspector {     RequestSecurityTokenResponse _rstr;       public IssuedTokenHeaderInspector(RequestSecurityTokenResponse rstr)     {         _rstr = rstr;     }       public void AfterReceiveReply(ref Message reply, object correlationState)     { }       public object BeforeSendRequest(ref Message request, IClientChannel channel)     {         request.Headers.Add(new IssuedTokenHeader(_rstr));                  return null;     } }   public class IssuedTokenHeaderBehavior : IEndpointBehavior {     RequestSecurityTokenResponse _rstr;       public IssuedTokenHeaderBehavior(RequestSecurityTokenResponse rstr)     {         if (rstr == null)         {             throw new ArgumentNullException();         }           _rstr = rstr;     }       public void ApplyClientBehavior(       ServiceEndpoint endpoint, ClientRuntime clientRuntime)     {         clientRuntime.MessageInspectors.Add(new IssuedTokenHeaderInspector(_rstr));     }       // rest omitted } This allows to set up a proxy with an issued token header and you don’t have to worry anymore with embedding the header manually with every call: var client = GetWSTrustClient();   var rst = new RequestSecurityToken(WSTrust13Constants.KeyTypes.Symmetric) {     AppliesTo = new EndpointAddress("https://rp/") };   client.IssueCompleted += (s, args) => {     _proxy = new StarterServiceContractClient();     _proxy.Endpoint.Behaviors.Add(new IssuedTokenHeaderBehavior(args.Result));   };   client.IssueAsync(rst); Since SL4 also support the IExtension<T> interface, you can also combine this with Nicholas Allen’s AutoHeaderExtension.

    Read the article

  • Color Picking Troubles - LWJGL/OpenGL

    - by Tom Johnson
    I'm attempting to check which object the user is hovering over. While everything seems to be just how I'd think it should be, I'm not able to get the correct color due to the second time I draw (without picking colors). Here is my rendering code: public void render() { glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glLoadIdentity(); camera.applyTranslations(); scene.pick(); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glLoadIdentity(); camera.applyTranslations(); scene.render(); } And here is what gets called on each block/tile on "scene.pick()": public void pick() { glColor3ub((byte) pickingColor.x, (byte) pickingColor.y, (byte) pickingColor.z); draw(); glReadBuffer(GL_FRONT); ByteBuffer buffer = BufferUtils.createByteBuffer(4); glReadPixels(Mouse.getX(), Mouse.getY(), 1, 1, GL_RGBA, GL_UNSIGNED_BYTE, buffer); int r = buffer.get(0) & 0xFF; int g = buffer.get(1) & 0xFF; int b = buffer.get(2) & 0xFF; if(r == pickingColor.x && g == pickingColor.y && b == pickingColor.z) { hovered = true; } else { hovered = false; } } I believe the problem is that in the method of each tile/block called by scene.pick(), it is reading the color from the regular drawing state, after that method is called somehow. I believe this because when I remove the "glReadBuffer(GL_FRONT)" line from the pick method, it seems to almost fix it, but then it will also select blocks behind the one you are hovering as it is not only looking at the front. If you have any ideas of what to do, please be sure to reply!/ EDIT: Adding scene.render(), tile.render(), and tile.draw() scene.render: public void render() { for(int x = 0; x < tiles.length; x++) { for(int z = 0; z < tiles.length; z++) { tiles[x][z].render(); } } } tile.render: public void render() { glColor3f(color.x, color.y, color.z); draw(); if(hovered) { glColor3f(1, 1, 1); glPolygonMode(GL_FRONT_AND_BACK, GL_LINE); draw(); glPolygonMode(GL_FRONT_AND_BACK, GL_FILL); } } tile.draw: public void draw() { float x = position.x, y = position.y, z = position.z; //Top glBegin(GL_QUADS); glVertex3f(x, y + size, z); glVertex3f(x + size, y + size, z); glVertex3f(x + size, y + size, z + size); glVertex3f(x, y + size, z + size); glEnd(); //Left glBegin(GL_QUADS); glVertex3f(x, y, z); glVertex3f(x + size, y, z); glVertex3f(x + size, y + size, z); glVertex3f(x, y + size, z); glEnd(); //Right glBegin(GL_QUADS); glVertex3f(x + size, y, z); glVertex3f(x + size, y + size, z); glVertex3f(x + size, y + size, z + size); glVertex3f(x + size, y, z + size); glEnd(); } (The game is like an isometric game. That's why I only draw 3 faces.)

    Read the article

  • Ubuntu 12.04 LXC nat prerouting not working

    - by petermolnar
    I have a running Debian Wheezy setup I copied exactly to an Ubuntu 12.04 ( elementary OS, used as desktop as well ) While the Debian setup runs flawlessly, the Ubuntu version dies on the prerouting to containers ( or so it seems ) In short: lxc works containers work and run connecting to container from host OK ( including mixed ports & services ) connecting to outside world from container is fine What does not work is connecting from another box to the host on a port that should be NATed to a container. The setups: /etc/rc.local CMD_BRCTL=/sbin/brctl CMD_IFCONFIG=/sbin/ifconfig CMD_IPTABLES=/sbin/iptables CMD_ROUTE=/sbin/route NETWORK_BRIDGE_DEVICE_NAT=lxc-bridge HOST_NETDEVICE=eth0 PRIVATE_GW_NAT=192.168.42.1 PRIVATE_NETMASK=255.255.255.0 PUBLIC_IP=192.168.13.100 ${CMD_BRCTL} addbr ${NETWORK_BRIDGE_DEVICE_NAT} ${CMD_BRCTL} setfd ${NETWORK_BRIDGE_DEVICE_NAT} 0 ${CMD_IFCONFIG} ${NETWORK_BRIDGE_DEVICE_NAT} ${PRIVATE_GW_NAT} netmask ${PRIVATE_NETMASK} promisc up Therefore lxc network is 192.168.42.0/24 and the host eth0 ip is 192.168.13.100; setup via network manager as static address. iptables: *mangle :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT *filter :FORWARD ACCEPT [0:0] :INPUT DROP [0:0] :OUTPUT ACCEPT [0:0] # Accept traffic from internal interfaces -A INPUT -i lo -j ACCEPT # accept traffic from lxc network -A INPUT -d 192.168.42.1 -s 192.168.42.0/24 -j ACCEPT # Accept internal traffic Make sure NEW incoming tcp connections are SYN # packets; otherwise we need to drop them: -A INPUT -p tcp ! --syn -m state --state NEW -j DROP # Packets with incoming fragments drop them. This attack result into Linux server panic such data loss. -A INPUT -f -j DROP # Incoming malformed XMAS packets drop them: -A INPUT -p tcp --tcp-flags ALL ALL -j DROP # Incoming malformed NULL packets: -A INPUT -p tcp --tcp-flags ALL NONE -j DROP # Accept traffic with the ACK flag set -A INPUT -p tcp -m tcp --tcp-flags ACK ACK -j ACCEPT # Allow incoming data that is part of a connection we established -A INPUT -m state --state ESTABLISHED -j ACCEPT # Allow data that is related to existing connections -A INPUT -m state --state RELATED -j ACCEPT # Accept responses to DNS queries -A INPUT -p udp -m udp --dport 1024:65535 --sport 53 -j ACCEPT # Accept responses to our pings -A INPUT -p icmp -m icmp --icmp-type echo-reply -j ACCEPT # Accept notifications of unreachable hosts -A INPUT -p icmp -m icmp --icmp-type destination-unreachable -j ACCEPT # Accept notifications to reduce sending speed -A INPUT -p icmp -m icmp --icmp-type source-quench -j ACCEPT # Accept notifications of lost packets -A INPUT -p icmp -m icmp --icmp-type time-exceeded -j ACCEPT # Accept notifications of protocol problems -A INPUT -p icmp -m icmp --icmp-type parameter-problem -j ACCEPT # Respond to pings, but limit -A INPUT -m icmp -p icmp --icmp-type echo-request -m state --state NEW -m limit --limit 6/s -j ACCEPT # Allow connections to SSH server -A INPUT -p tcp -m tcp --dport 22 -m state --state NEW -m limit --limit 12/s -j ACCEPT COMMIT *nat :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A PREROUTING -d 192.168.13.100 -p tcp -m tcp --dport 2221 -m state --state NEW -m limit --limit 12/s -j DNAT --to-destination 192.168.42.11:22 -A PREROUTING -d 192.168.13.100 -p tcp -m tcp --dport 80 -m state --state NEW -m limit --limit 512/s -j DNAT --to-destination 192.168.42.11:80 -A PREROUTING -d 192.168.13.100 -p tcp -m tcp --dport 443 -m state --state NEW -m limit --limit 512/s -j DNAT --to-destination 192.168.42.11:443 -A POSTROUTING -d 192.168.42.0/24 -o eth0 -j SNAT --to-source 192.168.13.100 -A POSTROUTING -o eth0 -j MASQUERADE COMMIT sysctl: net.ipv4.conf.all.forwarding = 1 net.ipv4.conf.all.mc_forwarding = 0 net.ipv4.conf.default.forwarding = 1 net.ipv4.conf.default.mc_forwarding = 0 net.ipv4.ip_forward = 1 I've set up full iptables log on the container; none of the packets addressed to 192.168.13.100, port 80 is reaching the container. I've even tried different kernels ( server kernel, raring lts kernel, etc ), modprobe everything iptables & nat related, nothing. Any ideas?

    Read the article

  • How to deal with overly aggressive "Link Take Down Demands"?

    - by Eoin
    I've been receiving a large number of emails recently requesting I clean from link spam from my forum. Initially the emails were very polite and professional, and I was happy to remove the links. Recently the email have gotten very abrasive, here is a particularly rude example: From: [email protected] To: [email protected] Hi, This is the second time we are reaching out to you regarding your link to our site hxxp://www.company-two.com from hxxp://www.my-forum.com/some-topic-id. We really do need to remove this link. We have to report to Google any link we were unable to remove, and I wouldn't want to have to include your site in the list. Could you please remove our link from this page and any other page on your site? Thank You, Name Changed Behind the superficial pleasantries I feel there is some very real maliciousness. Note the email address, DMCA Violations, I don't see how the DMCA is involved here, except as a word which tends to strike fear in many people. Also relating to the email address, it doesn't match the company being linked to at all. How am I to trust they are truely operating on behalf of company-two when they don't even use one of it's email addresses. My email is hidden by privacypost. While a service with legitimate uses, I feel it's highly unprofessional for communications between to companies. The claim "This is the second time..." Every email I've received has started like this, but a check of my spam filters has never revealed a 1st mail. Initially I gave them the benefit of the doubt, by now though it's clear this is a cheap ploy to start me off on the defensive. And finally worst of all- the threats of reporting me to Google if I don't do everything they ask. I sent a polite reply asking for more information. I have no idea if the email address was even valid but I never received any response. Much later I got this followup mail From: [email protected] To: [email protected] Hi, This is the final time we are reaching out to you regarding your link to our site hxxp://www.company-two.com from hxxp://www.my-forum.com/some-topic-id. We will soon be reporting to Google any link we were unable to remove, and currently your site will have to be on the list. Could you please remove our link from this page and any other page on your site? I appreciate your urgent attention to this matter. Thank You, Name Changed This time the from address was more personal, though still not obviously connected to the spammed company. Lets be honest, I don't for one second believe that the companies were the victim of a 3rd party spammer as they claim. The links in questions were generated well over a year ago, and I firmly believe the companies were directly responsible for the spam links in question, a type of spam that has plagued my forum. Now they have the audacity to demand I spend my time cleaning up their mess, using threats to ensure they get their way. Have recent changes in Googles algorithms meant all the cash they spent spamming the web has now turned into a liability? If so I can see why these companies are all of a sudden running scared. Frankly, cleaning up my forum is a good things, but the threats they are using sickens me. So my question here is specifically about the threats: Are they vaild, and would such reports to Google destroy my page rankings? Is there a way I can report this abusive behaviour to Google?

    Read the article

  • Framework for Everything - Where to begin? [Longer post]

    - by SquaredSoft
    Back story of this question, feel free to skip down for the specific question Hello, I've been very interested in the idea of abstract programming the last few years. I've made about 30 attempts at creating a piece of software that is capable of almost anything you throw at it. I've undertook some attempts at this that have taken upwards of a year, while getting close, never releasing it beyond my compiler. This has been something I've always tried wrapping my head around, and something is always missing. With the title, I'm sure you're assuming, "Yes of course you noob! You can't account for everything!" To which I have to reply, "Why not?" To give you some background into what I'm talking about, this all started with doing maybe a shade of gray hat SEO software. I found myself constantly having to create similar, but slightly different sets of code. I've gone through as many iterations of way to communicate on http as the universe has particles. "How many times am I going to have to write this multi-threaded class?" is something I found myself asking a lot. Sure, I could create a class library, and just work with that, but I always felt I could optimize what I had, which often was a large undertaking and typically involved frequent use of the CRTL+A keyboard shortcut, mixed with the delete button. It dawned on me that it was time to invest in a plugin system. This would allow me to simply add snippets of code. as time went on, and I could subversion stuff out, and distribute small chunks of code, rather than something that encompasses only a specific function or design. This comes with its own complexity, of course, and by the time I had finished the software scope for this addition, it hit me that I would want to add to everything in the software, not just a new http method, or automation code for a specific website. Great, we're getting more abstract. However, the software that I have in my mind comes down to a quite a few questions regarding its execution. I have to have some parameters to what I am going to do. After writing what the perfect software would do in my mind, I came up with this as a list of requirements: Should be able to use networking A "Macro" or "Expression system" which would allow people to do something like : =First(=ParseToList(=GetUrl("http://www.google.com?q=helloworld!"), Template.Google)) Multithreaded Able to add UI elements through some type of XML -- People can make their own addons etc. Can use third party API through the plugins, such as Microsoft CRM, Exchange, etc. This would allow the software to essentially be used for everything. Really, any task you wish to automate, in a simple way. Making the UI was as also extremely hard. How do you do all of this? Its very difficult. So my question: With so many attempts at this, I'm out of ideas how to successfully complete this. I have a very specific idea in my mind, but I keep failing to execute it. I'm a self taught programmer. I've been doing it for years, and work professionally in it, but I've never encountered something that would be as complex and in-depth as a system which essentially does everything. Where would you start? What are the best practices for design? How can I avoid constantly having to go back and optimize my software. What can I do to generalize this and draw everything out to completion. These are things I struggle with. P.s., I'm using c# as my main language. I feel like in this example, I might be hitting the outer limit of the language, although, I don't know if that is the case, or if I'm just a bad programmer. Thanks for your time.

    Read the article

  • When will EBS 12.2 be released?

    - by Steven Chan (Oracle Development)
    The most frequently asked question at OpenWorld this year was, "When will EBS 12.2 be released?" Sadly, Oracle's communication policies prohibit us from speculating about release dates for unreleased software. We are not permitted to give estimates, rough timelines, guesses, or anything else that remotely resembles specific guidance on release dates. You can monitor My Oracle Support and this blog for updates on EBS 12.2.  I'll post them here as soon as they're available.  I'm embedding an old favourite from 2007 in its entirety here, since it applies equally to new releases as well as certifications. "Loose Lips Sink Ships" (March 20, 2007)If I were to sort emails in my inbox into groups, the biggest -- by far -- would be the one for emails that start with, "When will _____ be certified with the E-Business Suite?"  I answer these dutifully but know that my replies can sometimes be maddening, for two reasons:  technical uncertainty, and Oracle's rules for such communications. On the Spiral Model of CertificationsTechnology stack certifications tend to be highly iterative in nature.  As a result, statements about certification dates tend to be accurate only when made in hindsight.  Laypeople are horrified to hear this, but it's the ugly truth.  Uncertainty is simply inherent to the process.  I've become inured to it over the years, but it might come as a surprise to you that it can take many cycles to get fully-released software to work together.  Take this scenario: We test a particular combination of Component A and B. If we encounter a problem, say, with Component A, we log a bug. We receive a new version of Component A. The process iterates again. The reality is this: until a certification is completed and released, there's no accurate way of telling how many iterations are yet to come.  This is true regardless of the number of iterations that have already been completed.  Our Lips Are SealedGenerally, people understand that things are subject to change, so the second reason I can't say anything specific is actually much more important than the first.  "Loose lips might sink ships" was coined in World War II in an effort to remind people that careless talk can have serious consequences.  Curiously, this applies to Oracle's communications about upcoming features, configurations, and releases, too.  As a publicly traded company, we have very strict policies that prohibit us from linking specific releases to specific dates.  If you've ever listened to an earnings call with analysts, you'll often hear them asking, "Can you add a little more color to that statement?"  For certifications, color is usually the only thing that I have.  Sometimes I can provide a bit more information about the technical nature of the certification in question, such as expected footprints or version levels.  I can occasionally share technical issues that we've found, too, to convey the degree of risk or complexity involved in the certification.  Aside from that, there's little additional information about specific dates, date ranges, or even speculation about dates that I can provide... that is, without having one of those uncomfortable conversations with Oracle Legal.  So, as much as it pains me to do so, when it comes to dates, I'm always forced to conclude with a generic reply that blandly states one of the following: We're working on that certification right now That certification is in the pipeline but hasn't been started yet We don't have plans for that certification Don't Shoot the MessengerThankfully, I've developed a thick skin over the years -- which is a good thing, considering the colorful and energetic responses I've received over the years after answering these questions.  However, on behalf of my Oracle colleagues who are faced with these questions every day in the field, I urge you to remember that they're required to follow these same corporate rules about date disclosures.  It never hurts to ask, but don't be too disappointed if we can't provide you with a detailed answer.  The Go-Go's had it right, after all.  Related Articles Webcast Replay Available: Technical Preview of EBS 12.2 Online Patching

    Read the article

  • Criminals and Other Illegal Characters

    - by Most Valuable Yak (Rob Volk)
    SQLTeam's favorite Slovenian blogger Mladen (b | t) had an interesting question on Twitter: http://www.twitter.com/MladenPrajdic/status/347057950470307841 I liked Kendal Van Dyke's (b | t) reply: http://twitter.com/SQLDBA/status/347058908801667072 And he was right!  This is one of those pretty-useless-but-sounds-interesting propositions that I've based all my presentations on, and most of my blog posts. If you read all the replies you'll see a lot of good suggestions.  I particularly like Aaron Bertrand's (b | t) idea of going into the Unicode character set, since there are over 65,000 characters available.  But how to find an illegal character?  Detective work? I'm working on the premise that if SQL Server will reject it as a name it would throw an error.  So all we have to do is generate all Unicode characters, rename a database with that character, and catch any errors. It turns out that dynamic SQL can lend a hand here: IF DB_ID(N'a') IS NULL CREATE DATABASE [a]; DECLARE @c INT=1, @sql NVARCHAR(MAX)=N'', @err NVARCHAR(MAX)=N''; WHILE @c<65536 BEGIN BEGIN TRY SET @sql=N'alter database ' + QUOTENAME(CASE WHEN @c=1 THEN N'a' ELSE NCHAR(@c-1) END) + N' modify name=' + QUOTENAME(NCHAR(@c)); RAISERROR(N'*** Trying %d',10,1,@c) WITH NOWAIT; EXEC(@sql); SET @c+=1; END TRY BEGIN CATCH SET @err=ERROR_MESSAGE(); RAISERROR(N'Ooops - %d - %s',10,1,@c,@err) WITH NOWAIT; BREAK; END CATCH END SET @sql=N'alter database ' + QUOTENAME(NCHAR(@c-1)) + N' modify name=[a]'; EXEC(@sql); The script creates a dummy database "a" if it doesn't already exist, and only tests single characters as a database name.  If you have databases with single character names then you shouldn't run this on that server. It takes a few minutes to run, but if you do you'll see that no errors are thrown for any of the characters.  It seems that SQL Server will accept any character, no matter where they're from.  (Well, there's one, but I won't tell you which. Actually there's 2, but one of them requires some deep existential thinking.) The output is also interesting, as quite a few codes do some weird things there.  I'm pretty sure it's due to the font used in SSMS for the messages output window, not all characters are available.  If you run it using the SQLCMD utility, and use the -o switch to output to a file, and -u for Unicode output, you can open the file in Notepad or another text editor and see the whole thing. I'm not sure what character I'd recommend to answer Mladen's question.  I think the standard tab (ASCII 9) is fine.  There's also several specific separator characters in the original ASCII character set (decimal 28-31). But of all the choices available in Unicode whitespace, I think my favorite would be the Mongolian Vowel Separator.  Or maybe the zero-width space. (that'll be fun to print!)  And since this is Mladen we're talking about, here's a good selection of "intriguing" characters he could use.

    Read the article

  • No access to Samba shares

    - by koanhead
    I have three shared folders in my local home directory- that is to say, on my Ubuntu desktop's /home/me/. All were set up using "Sharing Options" in Nautilus' right-click menu. The standard "Music" and "Videos" folders are configured identically: the "Guest Access" box is checked, but the "Allow others to create and delete" is not. The third folder, called "shared", is configured to not allow Guest access but to allow others to modify files. I have not altered /etc/samba/smb.conf by hand, I have only used Sharing Options to create and modify these so-called "shares". My roommates have two Windows 7 computers and one Ubuntu Netbook Remix netbook. I have the aforementioned desktop machine and laptop running 10.04. None of these machines can access any of the shares. Attempts to access the Guest shares result in the message \\machine\directory is not accessible. The network name could not be found. This is the error message generated by a VM running Windows 2000. The other Windows machines generate a similar error. The Ubuntu laptop gives the error Unable to mount location: Failed to mount Windows share. Hurrah, once again, for informative error messages. That really helps a lot. When attempting to browse the folder called "shared" from the laptop, I'm confronted with a password dialog. This behavior is the same will all machines I've tried in the situation. On entering my username and password for the account to which the shares belong, the password dialog briefly disappears and is replaced with an identical dialog. No error message, useful or not, appears. When attempting to browse this folder with the VM, the outcome is the same except that the password dialog helpfully states "incorrect username or password". My assumption is that the username and password in question is that of the user which owns the shares. I have tried all other username and password combinations available in this context and the outcome is the same. I would like to be able to share files. Sharing them with Windows machines is a nice feature, or would be if it was available. Really I consider sharing files between two machines with the same version of the same operating system kind of a minimum condition for network usability. Samba last functioned reliably for me more than ten years ago. I have attempted to use it on and off since then with only intermittent success. Oh, and "Personal File Sharing" from the Preferences menu does not result in an entry in Places → Network → my-server. In fact, the old entry "MY-SERVER" goes away and is replaced by "koanhead's public files on my-server", which when I attempt to open it from the laptop gives a "DBus.Error.NoReply: Message did not receive a reply." I know I come here and gripe about Ubuntu a lot, but on the other hand I spend literally hours every day trying to fix things in Ubuntu. It's a good system which aspires to greatness, which is why things like this either Need to work; or Be adequately documented. Ideally both would be the case. Anyway, rant over. Hopefully someone will have some insight on this issue. Thanks all who bother to read this wall o'text for your time.

    Read the article

  • No access to Samba shares

    - by koanhead
    I have three shared folders in my local home directory- that is to say, on my Ubuntu desktop's /home/me/. All were set up using "Sharing Options" in Nautilus' right-click menu. The standard "Music" and "Videos" folders are configured identically: the "Guest Access" box is checked, but the "Allow others to create and delete" is not. The third folder, called "shared", is configured to not allow Guest access but to allow others to modify files. I have not altered /etc/samba/smb.conf by hand, I have only used Sharing Options to create and modify these so-called "shares". My roommates have two Windows 7 computers and one Ubuntu Netbook Remix netbook. I have the aforementioned desktop machine and laptop running 10.04. None of these machines can access any of the shares. Attempts to access the Guest shares result in the message \\machine\directory is not accessible. The network name could not be found. This is the error message generated by a VM running Windows 2000. The other Windows machines generate a similar error. The Ubuntu laptop gives the error Unable to mount location: Failed to mount Windows share. Hurrah, once again, for informative error messages. That really helps a lot. When attempting to browse the folder called "shared" from the laptop, I'm confronted with a password dialog. This behavior is the same will all machines I've tried in the situation. On entering my username and password for the account to which the shares belong, the password dialog briefly disappears and is replaced with an identical dialog. No error message, useful or not, appears. When attempting to browse this folder with the VM, the outcome is the same except that the password dialog helpfully states "incorrect username or password". My assumption is that the username and password in question is that of the user which owns the shares. I have tried all other username and password combinations available in this context and the outcome is the same. I would like to be able to share files. Sharing them with Windows machines is a nice feature, or would be if it was available. Really I consider sharing files between two machines with the same version of the same operating system kind of a minimum condition for network usability. Samba last functioned reliably for me more than ten years ago. I have attempted to use it on and off since then with only intermittent success. Oh, and "Personal File Sharing" from the Preferences menu does not result in an entry in Places → Network → my-server. In fact, the old entry "MY-SERVER" goes away and is replaced by "koanhead's public files on my-server", which when I attempt to open it from the laptop gives a "DBus.Error.NoReply: Message did not receive a reply." I know I come here and gripe about Ubuntu a lot, but on the other hand I spend literally hours every day trying to fix things in Ubuntu. It's a good system which aspires to greatness, which is why things like this either Need to work; or Be adequately documented. Ideally both would be the case. Anyway, rant over. Hopefully someone will have some insight on this issue. Thanks all who bother to read this wall o'text for your time.

    Read the article

  • Java and AppStore receipt verification

    - by user1672461
    I am trying to verify a payment receipt on server side. I am getting a {"status":21002, "exception":"java.lang.IllegalArgumentException"} in return Here is the code: private final static String _sandboxUriStr = "https://sandbox.itunes.apple.com/verifyReceipt"; public static void processPayment(final String receipt) throws SystemException { final BASE64Encoder encoder = new BASE64Encoder(); final String receiptData = encoder.encode(receipt.getBytes()); final String jsonData = "{\"receipt-data\" : \"" + receiptData + "\"}"; System.out.println(receipt); System.out.println(jsonData); try { final URL url = new URL(_productionUriStr); final HttpURLConnection conn = (HttpsURLConnection) url.openConnection(); conn.setRequestMethod("POST"); conn.setDoOutput(true); final OutputStreamWriter wr = new OutputStreamWriter(conn.getOutputStream()); wr.write(jsonData); wr.flush(); // Get the response final BufferedReader rd = new BufferedReader(new InputStreamReader(conn.getInputStream())); String line; while ((line = rd.readLine()) != null) { System.out.println(line); } wr.close(); rd.close(); } catch (IOException e) { throw new SystemException("Error when trying to send request to '%s', %s", _sandboxUriStr, e.getMessage()); } } My receipt looks like this: {\n\t"signature" = "[exactly_1320_characters]";\n\t"purchase-info" = "[exactly_868_characters]";\n\t"environment" = "Sandbox";\n\t"pod" = "100";\n\t"signing-status" = "0";\n} Receipt data with a BASE64 encoded receipt looks like this: Blockquote {"receipt-data" : "[Block_of_chars_76x40+44=3084_chars_total]"} Does someone have an Idea, or sample code how can I get from receipt string to reply JSON, mentioned here: [http://developer.apple.com/library/ios/#documentation/NetworkingInternet/Conceptual/StoreKitGuide/VerifyingStoreReceipts/VerifyingStoreReceipts.html#//apple_ref/doc/uid/TP40008267-CH104-SW1]? Thank you

    Read the article

  • unable to get "ItemValue" of selected item using f:selectitems tag in ace:autocompleteEntry

    - by user1641976
    i want to get the Value of selectItem (ItemValue which is an Integer and the Item Label is String) in my backing bean using autocompleteentry tag of icefaces 3.1.0 but i get error: here is the code: <tr> <td>Current City</td> <td> <ace:autoCompleteEntry value="#{service.cityId}" styleClass="select-field" rows="10" width="400" filterMatchMode="" > <f:selectItems value="#{service.cities}" ></f:selectItems> </ace:autoCompleteEntry> </td> </tr> Bean is : public class Service{ private Integer cityId; public Integer getCityId() { return cityId; } public void setCityId(Integer cityId) { this.cityId= cityId; } private <SelectItem> cities; public List<SelectItem> getCities() { return cities=Dao.getCityList(); } public void setCities(List<SelectItem> cities) { this.cities= cities; } } the cities has itemvalue as a number and itemLabel as String stored in it. I do get autocomplete fine and shows list of matches if i store value in some String property of backing bean but if storing in integer property of bean, gives this error as soon i write something in autocomplete. INFO: WARNING: FacesMessage(s) have been enqueued, but may not have been displayed. sourceId=frmmaster:j_idt205:txtcity[severity=(ERROR 2), summary=(frmmaster:j_idt205:txtcity: 'a' must be a number consisting of one or more digits.), detail=(frmmaster:j_idt205:txtcity: 'a' must be a number between -2147483648 and 2147483647 Example: 9346)] Kindly reply any person i need to solve this issue as soon as possible.

    Read the article

  • How does Silverlight Image Clipping work?

    - by TreeUK
    I've got a very large image which I'd like to use for sprite techniques (à la css image sprites). I've got the code below: <Image x:Name="testImage" Width="24" Height="12" Source="../Resources/Images/sprites.png"> <Image.Clip> <RectangleGeometry Rect="258,10632,24,12" /> </Image.Clip> </Image> This clips the source image to 24x12 at the relative position of 258, 10632 in the source image. The problem is that I want the cropped image to show at 0,0 in the testImage whereas it shows it at 258, 10632. It's using the geometry as a cutting guide but also as a layout guide. Anyone have any idea how this should be done? if at all. Conclusion: There seems to be no good way of doing this at present, Graeme's solution seems to be the closest to achieving this with Silverlight 2.0. That said, if anyone knows of a better way of doing this, please reply with an answer.

    Read the article

  • WCF Ria Services Error : Load operation failed for query 'GetTranslationProgress'

    - by Manoj
    Hello, I am using WCF Ria Services beta in my silverlight application. I have a long running task on the server which keeps writing its status to a database table. I have a "GetTranslationProgress" Ria Service Query method which queries the state to get the status. This query method is called continuously at a regular interval of 5 seconds until a status = Finished or Error is retrieved. In some cases if the task on the server is running for a long duration 2-3 minutes then I receives this error:- Load operation failed for query 'GetTranslationProgress'. The server did not provide a meaningful reply; this might be caused by a contract mismatch, a premature session shutdown or an internal server error. at System.Windows.Ria.OperationBase.Complete(Exception error) at System.Windows.Ria.LoadOperation.Complete(Exception error) at System.Windows.Ria.DomainContext.CompleteLoad(IAsyncResult asyncResult) at System.Windows.Ria.DomainContext.<c_DisplayClass17.b_13(Object ) The error occurs intermittently and I have no idea what could be causing this error. I have checked most of the forums and sites but I have not been able to find out any solution to this issue. Please help.

    Read the article

  • NSFileManager works fine on simulator but not on device

    - by Jenicek
    Hi, I have problem creating directories and files with NSFileManager on the iPhone device. My code, shown below, works fine on the simulator, but not on the device, could you please help me? Gimme some directions where the problem may be, thanks for every reply.. I'm first creating directories this way: NSFileManager *fileMgr = [NSFileManager defaultManager]; NSArray *arPaths = NSSearchPathForDirectoriesInDomains(NSDownloadsDirectory, NSUserDomainMask, YES); NSString *appPath = [[NSString alloc] init]; appPath = [arPaths objectAtIndex:0]; strDownloadsDir = [[NSString alloc] init]; strDownloadsDir = [[appPath stringByAppendingPathComponent:@"/Other"] copy]; if(![fileMgr fileExistsAtPath:strDownloadsDir]) [fileMgr createDirectoryAtPath:strDownloadsDir attributes:nil]; and then I'm trying to create new file in this directory this way: NSString *filePath = [strDownloadsDir stringByAppendingPathComponent:strDlFileName]; //Test whether this file exists, if not, create it NSLog(@"%@", filePath); if(![fileMgr fileExistsAtPath:filePath]) { if([fileMgr createFileAtPath:filePath contents:nil attributes:nil]) NSLog(@"Creating new file at path %@", filePath); else NSLog(@"Failed to create new file."); } It seems that there's something wrong with whole NSFileManager, because when I'm using fileExistAtPath with a path given by this NSArray *arPaths = NSSearchPathForDirectoriesInDomains(NSDownloadsDirectory, NSUserDomainMask, YES); NSString *appPath = [[NSString alloc] init]; appPath = [arPaths objectAtIndex:0]; it is not working too, I tried to change directory to NSDocumentsDirectory but it did not help

    Read the article

  • WCF Security in a Windows Service

    - by Alphonso
    I have a WCF service which can run as Console App and a Windows Service. I have recently copied the console app up to a W2K3 server with the following security settings: <wsHttpBinding> <binding name="ServiceBinding_Security" transactionFlow="true" > <security mode="TransportWithMessageCredential" > <message clientCredentialType="UserName" /> </security> </binding> </wsHttpBinding> <serviceCredentials> <userNameAuthentication userNamePasswordValidationMode="Custom" customUserNamePasswordValidatorType="Common.CustomUserNameValidator, Common" /> </serviceCredentials> Security works fine with no problems. I have exactly the same code, but running in a windows service and I get the following error when I try to call any of the methods from a client: System.ServiceModel.Security.MessageSecurityException was unhandled Message="An unsecured or incorrectly secured fault was received from the other party. See the inner FaultException for the fault code and detail." Source="mscorlib" StackTrace: Server stack trace: at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.ProcessReply(Message reply, SecurityProtocolCorrelationState correlationState, TimeSpan timeout) ...... (lots of stacktrace info - not very useful) InnerException: System.ServiceModel.FaultException Message="An error occurred when verifying security for the message." The exception tells me nothing. I'm assuming that it has something to do with acces to system resources from the Windows Service. I've tried running it under the same account as the console app, but no luck. Does anyone have any ideas?

    Read the article

  • Update the Progress bar using winforms c#

    - by karthik
    There is a functionality in my module, where the user can scan the number of serial ports in the system and when the user clicks "Auto scan" button, the code will have to go through each serial port and send a test message and wait for the reply. I am using Progress bar control to show process of autoscan. For which i need to pass the value to "x" and "Y" in my code to update the bar. How can i pass the value since my code is already in a foreach loop for getting the serialports. Y = should pass the value of total number of serial ports X = should iterate through each port and pass the value Hope i am clear with req. private void backgroundWorker1_DoWork(object sender, DoWorkEventArgs e) { string strAckData = ""; foreach (SerialPort sp in comPortsList) { sp.Open(); string sendData = "Auto scan"; sp.Write(sendData); strAckData += "Connection live on port " + sp.ReadExisting() + "\n"; sp.Close(); double dIndex = (double)x; **//How to pass the value here ?** double dTotal = (double)y; **//How to pass the value here ?** double dProgressPercentage = (dIndex / dTotal); int iProgressPercentage = (int)(dProgressPercentage * 100); // update the progress bar backgroundWorker1.ReportProgress(iProgressPercentage); } richTextBox1.Invoke(new MethodInvoker(delegate { richTextBox1.Text = strAckData; })); } private void backgroundWorker1_ProgressChanged(object sender, ProgressChangedEventArgs e) { ProgressBar.Value = e.ProgressPercentage; } private void backgroundWorker1_RunWorkerCompleted(object sender, RunWorkerCompletedEventArgs e) { StatusLabel.Text = "Auto Scan completed"; }

    Read the article

  • Client-Server Networking Between PHP Client and Java Server

    - by Muhammad Yasir
    Hi there, I have a university project which is already 99% completed. It consists of two parts-website (PHP) and desktop (Java). People have their accounts on the website and they wish to query different information regarding their accounts. They send an SMS which is received by desktop application which queries database of website (MySQL) and sends the reply accordingly. This part is working superbly. The problem is that some times website wishes to instruct the desktop application to send a specific SMS to a particular number. Apparently there seems no way other than putting all the load to the DB server... This is how I made it work. Website puts SMS jobs in a specific table. Java application polls this table again and again and if it finds a job, it executes it. Even this part is working correctly but unfortunately it is not acceptable by my university to poll the DB like this. :( The other approach I could think of is to use client-server one. I tried making Java server and its PHP client. So that whenever an SMS is to be sent, the website opens a socket connection to desktop application and sends two strings (cell # and SMS message). Unfortunately I am unable to do this. I was successfully to make a Java server which works fine when connected by a Java client, similarly my PHP client connects correctly to a PHP server, but when I try to cross them, they start hating each other... PHP shows no error but Java gives StreamCorruptedException when it tries to read header of input stream. Could someone please tell what I can try to make PHP client and Java server work together? Or if the said purpose can be achieved by another means, how? Regards, Yasir

    Read the article

  • DEVX Web chart control

    - by Minal
    i am using DEVX Webchart control.. Bind x-Axis values: <dxchartsui:WebChartControl ID="ChartOPCGraph" runat="server" Height="400px" Width="700px" ClientInstanceName="ChartOPCGraph" DiagramTypeName="XYDiagram"> <Diagram> <axisy> <gridlines visible="False"></gridlines> </axisy> </Diagram> <Titles> <cc1:ChartTitle Dock="Bottom" Font="Tahoma, 8pt" Text="Days" TextColor="Gray" Alignment="Center"> </cc1:ChartTitle> <cc1:ChartTitle Dock="Left" Font="Tahoma, 8pt" Text="% Payment made" TextColor="Gray" Alignment="Center"></cc1:ChartTitle> </Titles> </dxchartsui:WebChartControl> values are being populated from database. On x-axis only two number comes from database so i need to bind only these two values and rest of them must not be visible. For example i get 9 number from database and it binds 8.6,8.7,8.8,8.9,9,9.2,...... Need a quick reply..

    Read the article

  • Parse MIME messages

    - by Abhimanyu
    Hi, For my new project which has email module.i need to show all the email information on web.when i m making a call to server i m getting the base64 encoded mime data. after applying base64 decoding technique i m getting the mime data as follows: /*****************Mime data start *******************************/ From [email protected] Tue Jun 23 12:01:02 2009 Date: Tue, 23 Jun 2009 12:01:02 +0530 From: Prashant R Naik <[email protected]> To: [email protected] Subject: This is a test mail Message-ID: <[email protected]> Reply-To: Prashant R Naik <[email protected]> MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="ReaqsoxgOBHFXBhH" Content-Disposition: inline User-Agent: Mutt/1.5.18 (2008-05-17) Status: RO Content-Length: 1912 Lines: 52 --ReaqsoxgOBHFXBhH Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Test mail. Initiated by prashant Regards, -- Prashant R Naik Principal Technologist | Symbian & Web2.0 Geodesic Limited | www.geodesic.com Tel: +91-80-66551000 --ReaqsoxgOBHFXBhH Content-Type: image/gif Content-Disposition: attachment; filename="trash.gif" Content-Transfer-Encoding: base64 R0lGODlhEAAQANUoADJ8wTqU2DmR1TqV2DN9wTSBxTWFyTaGyTJ9wTWGyTaKzjmS1TOAxTuV 2DaFyTN8wDiN0jiO0jSAxTeKzjqS1DN8wTqR1TWFyjB4vTOBxTmO0TmS1DaKzTeJzTqV1zSA xDJ8wDqS1TeKzTF4vDF4vTiO0f///zuX2gAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACH5BAEAACgALAAA AAAQABAAAAaDQNRpSCwWhcakcsk8mZ5Qpik5pUKvT2W1uDVWp+BiYNAImAZmz/lcDoQEFoFp QTFtTPKFQLCAREolJiURJhCCJhqAJRMiIhwmjSYdJgqUjQoODgkJJgecBp0mBgYXBx8ZBQxY UAUSDAUACLEPDwgEAAAEIBUEtygkIyMkwMMYw8EjKEEAOw== --ReaqsoxgOBHFXBhH Content-Type: image/jpeg Content-Disposition: attachment; filename="bx.jpg" Content-Transfer-Encoding: base64 /9j/4AAQSkZJRgABAQEASABIAAD/2wBDAAEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEB AQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQH/2wBDAQEBAQEBAQEBAQEBAQEB AQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQEBAQH/wAAR CAAUAAoDAREAAhEBAxEB/8QAFQABAQAAAAAAAAAAAAAAAAAAAAn/xAAYEAEAAwEAAAAAAAAA AAAAAAAAGWen5//EABQBAQAAAAAAAAAAAAAAAAAAAAD/xAAUEQEAAAAAAAAAAAAAAAAAAAAA /9oADAMBAAIRAxEAPwCb4AJHym0Vp3PQJTaK07noJHgA/9k= --ReaqsoxgOBHFXBhH Content-Type: image/png Content-Disposition: attachment; filename="day_bg.png" Content-Transfer-Encoding: base64 iVBORw0KGgoAAAANSUhEUgAAAGQAAAApCAYAAADDJIzmAAAABmJLR0QA/wD/AP+gvaeTAAAA CXBIWXMAAAsTAAALEwEAmpwYAAAAB3RJTUUH2AwCCS0kTriU2QAAAB10RVh0Q29tbWVudABD cmVhdGVkIHdpdGggVGhlIEdJTVDvZCVuAAAAXElEQVR42u3bQQEAMAgDMZiqiZtP5AwbfeQk NO/WvPtLMR0TABEQIAICRECACAgQAREQIAICRECACAgQAREQIAICRECACAgQAREQIAICRECA CAgQARGQ7NpPPasFT+0FZPjBRwYAAAAASUVORK5CYII= --ReaqsoxgOBHFXBhH-- /*****************Mime data end *******************************/ now the problem is i have to parse this data and use it in my application.since this data is not a xml so it difficult to parse it (because parsing with some tag is easy).so any one who knows how to parse mime data help be.i m using erlang to parse this data. Thank you in advance

    Read the article

  • Problem in Autoresizing subviews in iPhone programmatically

    - by Cathy
    Hi, I have created a UIViewController and a UIView with two UIButtons in it. self.view = [[UIView alloc]initWithFrame:CGRectMake( 0,0,320,480)]; self.view.autoresizesSubviews = YES; self.view.backgroundColor = [UIColor redColor]; UIView *view; view = [[UIVew alloc]initWithFrame:CGRectMake(0,0,320,480)]; view.autoresizingMask = UIViewAutoresizingFlexibleWidth | UIViewAutoresizingFlexibleHeight; UIButton *button1; button.frame = CGRectMake(100,130,120,50); [button addTarget:self action:@selector(buttonAction:) forControlEvents:UIControlEventTouchUpInside]; [view addSubview:button]; [controller addSubview:view]; -(void)buttonAction:(id)sender { //I have created another view for a purpose [view removeFromSuperview]; UIView *view_obj; **view_obj.backgroundColor = [UIColor greenColor];** view_obj.autoresizingMask = UIViewAutoresizingFlexibleWidth | UIViewAutoresizingFlexibleWidth; [self.view addSubview:view_obj]; } Problem: When I change the orientation into landscape the view which has the button is resized but when i click on the button the view with the blueColor is displayed without autoresized. Where i can see half as root view in redColor and half as the subview in greenColor.I have also overrided the ShouldAutoRotate method and done this project programmatically. Please do reply me.

    Read the article

  • Handling mach exceptions in 64bit OS X application

    - by Brad S
    I have been able to register my own mach port to capture mach exceptions in my applications and it works beautifully when I target 32 bit. However when I target 64 bit, my exception handler catch_exception_raise() gets called but the array of exception codes that is passed to the handler are 32 bits wide. This is expected in a 32 bit build but not in 64 bit. In the case where I catch EXC_BAD_ACCESS the first code is the error number and the second code should be the address of the fault. Since the second code is 32 bits wide the high 32 bits of the 64 bit fault address is truncated. I found a flag in <mach/exception_types.h> I can pass in task_set_exception_ports() called MACH_EXCEPTION_CODES which from looking at the Darwin sources appears to control the size of the codes passed to the handler. It looks like it is meant to be ored with the behavior passed in to task_set_exception_ports(). However when I do this and trigger an exception, my mach port gets notified, I call exc_server() but my handler never gets called, and when the reply message is sent back to the kernel I get the default exception behavior. I am targeting the 10.6 SDK. I really wish apple would document this stuff better. Any one have any ideas?

    Read the article

  • ws-xmlrpc claims error on part of service but other clients work fine

    - by mludd
    I've been trying to connect to an rTorrent instance using ws-xmlrpc and it just isn't going too well. Now, the URL I'm using is the same that I've been using when making sure that rTorrent's XMLRPC support is fine (which it appears to be since both a native OS X application and a small python script I threw together appear to be able to talk to it just fine without any errors). However, when I try using ws-xmlrpc to connect I get org.apache.xmlrpc.XmlRpcException: Failed to create input stream: Unexpected end of file from serverat the top of my stack trace followed by a bunch of steps down to: java.net.SocketException: Unexpected end of file from server at sun.net.www.http.HttpClient.parseHTTPHeader(HttpClient.java:769) ... So basically, it seems that ws-xmlrpc is convinced that the reply from rTorrent is malformed somehow but other libraries apparently have no problem with it. The code I use to call rTorrent is: private Object callRTorrent(String command, Object[] params) { Object result = null; try { // xmlrpcclient is an XmlRpcClient object and is instantied in // the class constructor result = xmlrpcclient.execute(command, params); } catch(XmlRpcException xre) { System.out.println("Unable to execute method "+command); xre.printStackTrace(); } return result; } With command set to system.listMethodsand params set to an empty Object[]. From reading documentation and googling my conclusion is that I'm not doing anything obviously wrong and this problem doesn't appear to be common, so does anyone have a clue what's going on here?

    Read the article

  • Why I am getting a Heap Corruption Error?

    - by vaidya.atul
    I am new to C++. I am getting HEAP CORRUPTION ERROR. Any help will be highly appreciated. Below is my code class CEntity { //some member variables CEntity(string section1,string section2); CEntity(); virtual ~CEntity(); //pure virtual function .. virtual CEntity* create()const =0; }; I derive CLine from CEntity as below class CLine:public CEntity { // Again some variables ... // Constructor and destructor CLine(string section1,string section2); CLine(); ~CLine(); CLine* Create() const; } // CLine Implementation CLine::CLine(string section1,string section2):CEntity(section1,section2){}; CLine::CLine(); CLine* CLine::create()const{return new CLine();} I have another class CReader which uses CLine object and populates it in a multimap as below class CReader { public: CReader(); ~CReader(); multimap<int,CEntity*>m_data_vs_entity; }; //CReader Implementation CReader::CReader() { m_data_vs_entity.clear(); }; CReader::~CReader() { multimap<int,CEntity*>::iterator iter; for(iter = m_data_vs_entity.begin();iter!=m_data_vs_entity.end();iter++) { CEntity* current_entity = iter->second; if(current_entity) delete current_entity; } m_data_vs_entity.clear(); } I am reading the data from a file and then populating the CLine Class.The map gets populated in a function of CReader class. Since CEntity has a virtual destructor, I hope the piece of code in CReader's destructor should work. In fact, it does work for small files but I get HEAP CORRUPTION ERROR while working with bigger files. If there is something fundamentally wrong, then, please help me find it, as I have been scratching my head for quit some time now. Thanks in advance and awaiting reply, Regards, Atul

    Read the article

  • Programatically send SMS to email using Verizon Motorola Droid on Android

    - by Dave
    Hi, I was wondering if anyone knew the proper way to send an SMS message to an e-mail address using Verizon's CDMA Motorola Droid phone. The internal messaging application appears to automagically do this. While 3rd party applications like SMSPopup don't seem to be able to properly reply to e-mail addresses unless you compose the message inside the messaging application. When the internal messaging application sends a SMS message there's a corresponding 'RIL_REQUEST_CDMA_SEND_SMS' entry in the logcat (adb logcat -b radio). When you send a SMS to an e-mail address it prints the same thing, so behind the scenes it looks as though it is sending an sms. The interesting thing is that if you look at the content provider sent box the messages are addressed to various 1270XX-XXX-XXXX numbers. On other services you can send e-mail addresses by sending a SMS to a predefined short sms number. And then formatting your SMS as emailaddress subject message i.e. http://en.wikipedia.org/wiki/SMS_gateway#Carrier-Provided_SMS_to_E-Mail_Gateways For example, using T-mobile's number (500) you can send a SMS to an e-mail using the following: SmsManager smsMgr = SmsManager.getDefault(); smsMgr.sendTextMessage("500", null, "[email protected] message sent to an e-mail address from a SMS", null, null); Does anyone know if It is possible to programatically send SMS to email messages from a CDMA Android phone? Does Verizon actually send your replies as SMS messages or are they actually sent as MMS or normal http email messages? Any ideas about how to intercept what the raw message being sent to see what's going on? It might be possible that Verizon somehow generates a fake number temporarily tied to an e-mail address (since repeated messages are not sent to the same number). But, that seems pretty heavy handed. Thanks!

    Read the article

  • how to use gettimeofday() or something equivalent with Visual Studio C++ 2008?

    - by make
    Hi, Could someone please help me to use gettimeofday() function with Visual Studio C++ 2008 on Windows XP? here is a code that I found somewhere on the net: #include < time.h > #include <windows.h> #if defined(_MSC_VER) || defined(_MSC_EXTENSIONS) #define DELTA_EPOCH_IN_MICROSECS 11644473600000000Ui64 #else #define DELTA_EPOCH_IN_MICROSECS 11644473600000000ULL #endif struct timezone { int tz_minuteswest; /* minutes W of Greenwich */ int tz_dsttime; /* type of dst correction */ }; int gettimeofday(struct timeval *tv, struct timezone *tz) { FILETIME ft; unsigned __int64 tmpres = 0; static int tzflag; if (NULL != tv) { GetSystemTimeAsFileTime(&ft); tmpres |= ft.dwHighDateTime; tmpres <<= 32; tmpres |= ft.dwLowDateTime; /*converting file time to unix epoch*/ tmpres -= DELTA_EPOCH_IN_MICROSECS; tmpres /= 10; /*convert into microseconds*/ tv->tv_sec = (long)(tmpres / 1000000UL); tv->tv_usec = (long)(tmpres % 1000000UL); } if (NULL != tz) { if (!tzflag) { _tzset(); tzflag++; } tz->tz_minuteswest = _timezone / 60; tz->tz_dsttime = _daylight; } return 0; } ... // call gettimeofday() gettimeofday(&tv, &tz); tm = localtime(&tv.tv_sec); Last yesr when I tested this code VC++6, it works fine. But now when I use VC++ 2008, I am getting error of exception handling. So is there any idea on how to use gettimeofday or something equivalent? Thanks for your reply and any help would be very appreciated:

    Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >