Search Results

Search found 30117 results on 1205 pages for 'thread specific storage'.

Page 63/1205 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >

• Understanding Linux SCSI queue depths

  - by Troels Arvin

  I'm experimenting with the effects of different SCSI queue depth values on a Dell server running CentOS Linux 5.4 (x86_64). The server has two QLogic QLE2560 FC HBAs connected via multipathing to a storage system. The storage system has allocated two LUNs to the server, each connected through four paths in an active-active-active-active round-robin configuration. All in all, the two LUNs exist as eight /dev/sdX devices, represented by two devices in /dev/mpath. I currently adjust the queue depth values in /etc/modprobe.conf and check the result (after rebooting) by looking in the seventh column of /proc/scsi/sg/devices. Two questions related to that: Is there a way to adjust queue depths without rebooting or unloading the qla2xxx kernel module? E.g., can I echo a new queue depth value into some /proc or /sys-like file to update the queue depth? If I set the queue depth to 128, is that 128 in total for all devices handled by the qla2xxx module?, or 128 for each HBA? (256 in total), or 128 for each of the eight /dev/sdX devices (1024 in toal)?, or 128 for each of the two /dev/mpath/... devices (256 in total)? This is important for me to know so that my server doesn't flood the storage system, affecting other servers connected to it.

  Read the article

• INFORMIX - listener thread err 25582

  - by Samuel Lao

  I´ve been digging different forums in the last 7 days looking for a possible solution.... Our database is based on informix running in a Linux server (LINUX SUSE 11). Suddenly, last saturday informix began to show an error message: listener-thread err=-25582 oserr=0, network connection is broken End users started to call reporting about slow network performance to this server, moments where the database application lost connection with server...so we proceeded doing a ping to the db server, getting good responses (1ms) without losing packets. I tried typing telnet (ipserver) 1526 which is informix's port for the application, it works. We had to disconnect the server and enable a backup db server which is located on another branch. It has been working in a regular way because the backup server hasn´t good specs (it is an old dell server model). So, I scanned the main server looking for viruses using Trend Micro Server Protect, it didn´t find anything (0 viruses and spywares). I revised the switches and routers, but I haven´t find anything strange... What else could be ? Thanks in advanced for your time and help with this issue.....I would really appreciate any advice...

  Read the article

• Probability of Blade Chassis Failure

  - by ChrisZZ

  In my organisation we are thinking about buying blade servers - instead of rack servers. Of course technology vendors also make them sound very nice. A concern, that I read very often in different forums, is, that there is a theoretical possibility of the server chassis going down - which would in consequence take all the blades down. That is due to shared infrastructure. My reaction on this probability would be to have redundancy and by two chassis instead of one (very costly of course). Some people (including e.g. HP Vendors) try to convince us, that the chassis is very very unlikely to fail, due to many redundancies (redundant power supply, etc.). Another concern on my side is, that if something goes down, spare parts might be required - which is difficult in our location (Ethiopia). So I would ask to experienced administrators, that have managed blade server: What is your experience? Do they go down as a whole - and what is the sensible shared infrastructure, that might fail? That question could be extended to shared storage. Again I would say, that we need two storage units instead of only one - and again the vendors say, that this things are so rock solid, that no failure is expected. Well - I can hardly believe, that such a critical infrastructure can be very reliable without redundancy - but maybe you can tell me, whether you have successfull blade-based projects, that work without redundancy in its core parts (chassis, storage...) At the moment, we look at HP - as IBM looks much to expensive... thanks a lot best regards Christian

  Read the article

• Linux - real-world hardware RAID controller tuning (scsi and cciss)

  - by ewwhite

  Most of the Linux systems I manage feature hardware RAID controllers (mostly HP Smart Array). They're all running RHEL or CentOS. I'm looking for real-world tunables to help optimize performance for setups that incorporate hardware RAID controllers with SAS disks (Smart Array, Perc, LSI, etc.) and battery-backed or flash-backed cache. Assume RAID 1+0 and multiple spindles (4+ disks). I spend a considerable amount of time tuning Linux network settings for low-latency and financial trading applications. But many of those options are well-documented (changing send/receive buffers, modifying TCP window settings, etc.). What are engineers doing on the storage side? Historically, I've made changes to the I/O scheduling elevator, recently opting for the deadline and noop schedulers to improve performance within my applications. As RHEL versions have progressed, I've also noticed that the compiled-in defaults for SCSI and CCISS block devices have changed as well. This has had an impact on the recommended storage subsystem settings over time. However, it's been awhile since I've seen any clear recommendations. And I know that the OS defaults aren't optimal. For example, it seems that the default read-ahead buffer of 128kb is extremely small for a deployment on server-class hardware. The following articles explore the performance impact of changing read-ahead cache and nr_requests values on the block queues. http://zackreed.me/articles/54-hp-smart-array-p410-controller-tuning http://www.overclock.net/t/515068/tuning-a-hp-smart-array-p400-with-linux-why-tuning-really-matters http://yoshinorimatsunobu.blogspot.com/2009/04/linux-io-scheduler-queue-size-and.html For example, these are suggested changes for an HP Smart Array RAID controller: echo "noop" > /sys/block/cciss\!c0d0/queue/scheduler blockdev --setra 65536 /dev/cciss/c0d0 echo 512 > /sys/block/cciss\!c0d0/queue/nr_requests echo 2048 > /sys/block/cciss\!c0d0/queue/read_ahead_kb What else can be reliably tuned to improve storage performance? I'm specifically looking for sysctl and sysfs options in production scenarios.

  Read the article

• Windows 2003 Storage Server Hanging on Large File Transfers

  - by user25272

  In one of our offices we have a Dell PowerVault 745N NAS device which acts as the main file server. Its running 32bit Windows 2003 Storage Server SP2 with 3GB RAM. The server holds around 60 users HOME folders, which are mapped via AD. The office clients are a mix of XP SP3, Vista and Windows 7. Occasionally the server will completely hang when transferring large files. When the hang happens the console becomes unresponsive with only the mouse active and blank wallpaper. Sometimes stopping the copy frees the server, sometimes not. The hanging can last around 20 minutes. During this time other servers also become unresponsive with blank wallpaper at the console. If you do manage to get onto another server the taskbar and run commands are unresponsive. This also transcends to the client computers sometimes with explorer crashing. I'm guessing this is due to the HOME folder mapping. Eventually the NAS server with free up and everything will be back to normal. The server is configured as follows: PERC 4/DC DATA 2 - 12 SCSI HDD - RAID5 SHADOWCOPY 2 SCSI HDD - RAID1 CERC SATA DATA 11 4 SATA HDD - RAID5 OS 4 SATA HDD - RAID5 All the drivers and firmware is up to date. I've been through all the diagnostics with Dell and the hardware has come up clean including full HDD tests on the arrays. The server has NOD32 installed as the AV, but the hanging happens when it is uninstalled. There are no errors in the event log when this happens and we don't have any errors logged on any of our ProCurve switches. DNS is fine on the domain and AD from what I can tell is running happily. There are no DFS or NFS shares setup either. All the shares are standard Windows. I've unchecked the allow the computer to turn off this device to save power box under Power Management on the NIC. "Set Link Speed and Duplex to Auto-negotiate 1000 " Increased Receive Descriptors buffer from 256 to 352 (reserves more CPU resource for handling data) I've run network traces using network monitor and have found the following: 417 8.078125 {SMB:192, NbtSS:25, TCP:24, IPv4:23} 192.168.2.244 192.168.5.35 SMB SMB:R; Nt Create Andx - NT Status: System - Error, Code = (52) STATUS_OBJECT_NAME_NOT_FOUND I've tried different cabling; NICs and switch ports all with the same result. Transferring files from other servers on the domain is fine. All I haven't done is run CHKDSK on the drives to look for any file system errors. On the Vista clients I have also run netsh interface tcp set global autotuning=disabled with no result. Could it be that the server has a faulty drive or that the I/O is too much for it to handle? Any ideas why would the hang cause issues with the other servers on the LAN? Many Thanks.

  Read the article

• Dell VRTX - slow cluster shared storage

  - by NorbyTheGeek

  I have a brand new Dell VRTX box set up as a Failover Cluster running HA Hyper-V virtual machines. This is my first time setting up clustering, and my first time with one of these boxes, so I'm sure I've missed something. The virtual machines are experiencing high disk latency and bad performance when accessing their VHD(x) files located on a Cluster Shared Volume. The VRTX has 10 x 900 GB 10K SAS drives in RAID 6 configuration, and the VRTX has the redundant Shared PERC 8 controllers. Both blades have full access to the virtual disks. There are two M520 blades installed, each with 128 GB RAM. MPIO is configured for the PERC 8 controllers. Operating system on the blades is Server 2012 (NOT R2). The RAID 6 array is split into a small (8 GB) volume for cluster quorum witness and a large (6.5 TB) volume for a Cluster Shared Volume (mounted on the nodes as C:\ClusterStorage\Volume1) An example of slow disk access: logging into a Server 2012 VM and having Server Manager come up automatically. Disk access goes to 100%, with write speeds at 20 MB or so, read speeds of 500 KB or so, and Average Response Time of over 1000 ms, sometimes spiking at 4000-5000 ms or so. It's the latency that really worries me. Is there something specific I should look at in my configuration? It doesn't seem to matter whether I use VHD or VHDX, dynamic or static.

  Read the article

• windows: force user to use specific network adapter

  - by Chad

  I'm looking for a configuration/hack to force a particular application or all traffic from a particular user to use a specific NIC. I have an legacy client/server app that has a "security feature" that limits connections based on IP address. I'm trying to find a way to migrate this app to a terminal server environment. The simple solution is for the development team to update the code in the application, however in this case that's not an option. I was thinking I might be able to install VMware NIC's installed for each user on the terminal server and do some type of scripting to force that user account to use a specific NIC. Anybody have any ideas on this? EDIT 1: I think I have a hack to work around my specific problem, however I'd love to hear of a more elegant solution. I got lucky in that the software reads the server IP address out of a config file. So I'm going to have to make a config file for each user and make a customer programs files for each user. Then add a VMware NIC for each user and make each server IP address reside on a different subnet. That will force the traffic for a particular user to a particular IP address, however its really messy and all the VM NIC's will slow down the terminal server. I'll setup a proof of concept Monday and let the group know how it affects performance.

  Read the article

• Hard Disk based storage library

  - by Ryan M.

  We have a Tandberg T24 tape device to handle all of our long term backups right now. We decided that we're not backing up nearly everything that we would like to and that we still have a lot of vulnerabilities. To get to where we want to be, we're going to have to back up a lot more servers than we're currently doing. All of our internal servers have some sort of directly attached drive (I.e. LaCie Raid box or a simple portable hard drive) doing backups, but what we want to do is get those backups off-site. The current tape drive is directly attached via SCSI to a Windows Server 2008 File Server. So to back up anything to tape, it has to be funneled through the File Server. With the current increase that we have planned, I don't think that funneling everything through the File Server is the right course of action and I'm thinking that maybe a second backup device would be more appropriate. I would like your input on a couple of ideas. 1) Doing HDD instead of tape. Tape is hard to deal with. We have a regular rotation cycle, so they don't need years and years of shelf life, so I'm wondering if something HDD-based would be better. 2) Something accessible over the network. Instead of having the device directly attached to one specific machine, have it available to all the servers over the network. Our File Server is a 12-disk raid 6 set up.. I was thinking something like that, but with no raid involved, all disks are stand alone so they can be used/installed/removed on an individual basis. Does any such thing exist? Thanks for your ideas. I'm really interested to hear about some of the solutions you guys are using..

  Read the article

• JDBC connection for a background thread being closed accessing in Websphere

  - by ferrari fan

  Hi, I have an application running in Websphere Portal Server inside of Websphere Application Server 6.0 (WAS). In this application for one particular functionality that takes a long time to complete, I am firing a new thread that performs this action. This new thread opens a new Session from Hibernate and starts performing DB transactions with it. Sometimes (haven't been able to see a pattern), the transactions inside the thread work fine and the process completes successfully. Other times however I get the errors below: org.hibernate.exception.GenericJDBCException: could not load an entity: [OBJECT NAME#218294] ... Caused by: com.ibm.websphere.ce.cm.ObjectClosedException: DSRA9110E: Connection is closed. Method cleanup failed while trying to execute method cleanup on ManagedConnection WSRdbManagedConnectionImpl@642aa0d8 from resource jdbc/MyJDBCDataSource. Caught exception: com.ibm.ws.exception.WsException: DSRA0080E: An exception was received by the Data Store Adapter. See original exception message: Cannot call 'cleanup' on a ManagedConnection while it is still in a transaction.. How can I stop this from happening? Why does it seem that WAS wants to kill my connections even though they're not done. Is there a way I can stop WAS from attempting to close this particular connection? Thanks

  Read the article

• remove an ASIHTTPRequest thread when it is done

  - by user262325

  Hello everyone I have a project in which it runs 5 download threads - (void)fetchThisURLFiveTimes:(NSURL *)url { [myProgressIndicator setProgress:0]; NSLog(@"Value: %f", [myProgressIndicator progress]); [myQueue cancelAllOperations]; [myQueue setDownloadProgressDelegate:myProgressIndicator]; [myQueue setDelegate:self]; [myQueue setRequestDidFinishSelector:@selector(queueComplete:)]; int i; for (i=0; i<5; i++) { ASIHTTPRequest *request = [ASIHTTPRequest requestWithURL:url]; [request setDidFinishSelector:@selector(requestDone:)]; [request setDelegate:self]; [myQueue addOperation:request]; } [myQueue go]; } - (void)requestWentDone:(ASIHTTPRequest *)request { //.. } - (void)queueComplete:(ASINetworkQueue *)queue { NSLog(@"Value: %f", [myProgressIndicator progress]); } I hope to remove a thread when it is done. I do not know where I need to place my codes: requestWentDone:(ASIHTTPRequest *)request or queueComplete:(ASINetworkQueue *)queue I noticed there is no tag property for request, so I added it to ASIHTTPRequest to help me recognize which thread prompts the function reuqestWentDone, I can get the tag of different request, but I do not know how to remove the ASIHTTPRequest thread from myQueue. Welcome any comment Thanks interdev

  Read the article

• Race condition during thread start?

  - by user296353

  Hi, I'm running the following code to start my threads, but they don't start as intended. For some reason, some of the threads start with the same objects (and some don't even start). If I try to debug, they start just fine (extra delay added by me clicking F10 to step through the code). These are the functions in my forms app: private void startWorkerThreads() { int numThreads = config.getAllItems().Count; int i = 0; foreach (ConfigurationItem tmpItem in config.getAllItems()) { i++; var t = new Thread(() => WorkerThread(tmpItem, i)); t.Start(); //return t; } } private void WorkerThread(ConfigurationItem cfgItem, int mul) { for (int i = 0; i < 100; i++) { Thread.Sleep(10*mul); } this.Invoke((ThreadStart)delegate() { this.textBox1.Text += "Thread " + cfgItem.name + " Complete!\r\n"; this.textBox1.SelectionStart = textBox1.Text.Length; this.textBox1.ScrollToCaret(); }); } Anyone able to help me out? Cheers!

  Read the article

• reactor not working when reactor.run is not called in the main thread and installSignalHandlers=Fals

  - by Kalmi

  I'm trying to answer the following question out of personal interest: What is the fastest way to send 100,000 HTTP requests in Python? And this is what I have came up so far, but I'm experiencing something very stange. When installSignalHandlers is True, it just hangs. I can see that the DelayedCall instances are in reactor._newTimedCalls, but processResponse never gets called. When installSignalHandlers is False, it throws an error and works. from twisted.internet import reactor from twisted.web.client import Agent from threading import Semaphore, Thread import time concurrent = 100 s = Semaphore(concurrent) reactor.suggestThreadPoolSize(concurrent) t=Thread( target=reactor.run, kwargs={'installSignalHandlers':True}) t.daemon=True t.start() agent = Agent(reactor) def processResponse(response,url): print response.code, url s.release() def processError(response,url): print "error", url s.release() def addTask(url): req = agent.request('HEAD', url) req.addCallback(processResponse, url) req.addErrback(processError, url) for url in open('urllist.txt'): addTask(url.strip()) s.acquire() while s._Semaphore__value!=concurrent: time.sleep(0.1) reactor.stop() And here is the error that it throws when installSignalHandlers is True: (Note: This is the expected behaviour! The question is why it doesn't work when installSignalHandlers is False.) Traceback (most recent call last): File "/usr/lib/python2.6/dist-packages/twisted/internet/base.py", line 396, in fireEvent DeferredList(beforeResults).addCallback(self._continueFiring) File "/usr/lib/python2.6/dist-packages/twisted/internet/defer.py", line 224, in addCallback callbackKeywords=kw) File "/usr/lib/python2.6/dist-packages/twisted/internet/defer.py", line 213, in addCallbacks self._runCallbacks() File "/usr/lib/python2.6/dist-packages/twisted/internet/defer.py", line 371, in _runCallbacks self.result = callback(self.result, *args, **kw) --- <exception caught here> --- File "/usr/lib/python2.6/dist-packages/twisted/internet/base.py", line 409, in _continueFiring callable(*args, **kwargs) File "/usr/lib/python2.6/dist-packages/twisted/internet/base.py", line 1165, in _reallyStartRunning self._handleSignals() File "/usr/lib/python2.6/dist-packages/twisted/internet/base.py", line 1105, in _handleSignals signal.signal(signal.SIGINT, self.sigInt) exceptions.ValueError: signal only works in main thread What am I doing wrong and what is the right way? I'm new to twisted.

  Read the article

• UpdateAllViews() from within a worker thread?

  - by Harvey

  I have a worker thread in a class that is owned by a ChildView. (I intend to move this to the Doc eventually.) When the worker thread completes a task I want all the views to be updated. How can I make a call to tell the Doc to issue an UpdateAllViews()? Or is there a better approach? Thank you. Added by OP: I am looking for a simple solution. The App is running on a single user, single CPU computer and does not need network (or Internet) access. There is nothing to cause a deadlock. I think I would like to have the worker thread post (or send) a message to cause the views to update. Everything I read about threading seems way more complicated than what I need - and, yes, I understand that all those precautions are necessary for applications that are running in multiprocessor, multiuser, client-server systems, etc. But none of those apply in my situation. I am just stuck at getting the right combination of getting the window handle, posting the message and responding to the message in the right functions and classes to compile and function at all.

  Read the article

• python thread prob after build

  - by Apache

  hi expert, i'm having task to scan wifi at specific interval and send it to the server, i've it in python and its works fine when i run manually, then build it to package and when run there is no progress at all, i already ask this question before at http://stackoverflow.com/questions/2735410/python-scritp-problem-once-build-and-package-it, then, i re-modify my code as below, then i found that thread is not functioning once i build, #!/usr/bin/env python import subprocess,threading,... configFile = open('/opt/Jemapoh_Wifi/config.txt', 'r') url = configFile.readline().strip() intervalTime = configFile.readline().strip() status = configFile.readline().strip() print "url "+url print "intervalTime "+intervalTime print "Status "+status.strip() def getMacAddress(): proc = subprocess.Popen('ifconfig -a wlan0 | grep HWaddr | sed \'/^.*HWaddr */!d; s///;q\'', shell=True, stdout=subprocess.PIPE, ) macAddress = proc.communicate()[0].strip() return macAddress def getTimestamp(): from time import strftime timeStamp = strftime("%Y-%m-%d %H:%M:%S") return timeStamp def scanWifi(): try: print "Scanning..." proc = subprocess.Popen('iwlist scan 2>/dev/null', shell=True, stdout=subprocess.PIPE, ) stdout_str = proc.communicate()[0] stdout_list=stdout_str.split('\n') essid=[] rssi=[] preQuality=[] for line in stdout_list: line=line.strip() match=re.search('ESSID:"(\S+)"',line) if match: essid.append(match.group(1)) match=re.search('Quality=(\S+)',line) if match: preQuality.append(match.group(1)) for qualityConversion in preQuality: qualityConversion = qualityConversion.split()[0].split('/') temp = str(int(round(float(qualityConversion[0]) / float(qualityConversion[1]) * 100))).rjust(2) rssi.append(temp) dataToPost = '{"userId":"' + getMacAddress() + '","timestamp":"' + getTimestamp() + '","wifi":[' for no in range(len(essid)): dataToPost += '{"ssid":"' + essid[no] + '","rssi":"' + rssi[no] + '"}' if no+1 == len(essid): pass else: dataToPost += ',' dataToPost += ']}' query_args = {"data":dataToPost} request = urllib2.Request(url) request.add_data(urllib.urlencode(query_args)) request.add_header('Content-Type', 'application/x-www-form-urlencoded') print "Waiting for server response..." print urllib2.urlopen(request).read() print "Data Sent @ " + getTimestamp() print "------------------------------------------------------" t = threading.Timer(int(intervalTime), scanWifi).start() except Exception, e: print e t = threading.Timer(int(intervalTime), scanWifi) t.start() once build, its not reaching the thread, do can anyone help, why the thread is not working after build thanks

  Read the article

• InfoPath FormControl on STA worker thread

  - by Rob Ford

  I have a .NET class that exposes two public methods: one to create an InfoPath form and another to Export to one of the supported formats. I’m using the Microsoft FormControl to do this. It’s hosted by a Form that does not get displayed. I get called by a Winforms app, but on an MTA worker thread instead of the UI thread. So I create an STA thread and execute on that, which works exactly once and then results in this exception: System.InvalidOperationException was unhandled Message="Unable to get the window handle for the 'FormControl' control. Windowless ActiveX controls are not supported." Source="System.Windows.Forms" StackTrace: at System.Windows.Forms.AxHost.EnsureWindowPresent() at System.Windows.Forms.AxHost.InPlaceActivate() at System.Windows.Forms.AxHost.TransitionUpTo(Int32 state) at System.Windows.Forms.AxHost.CreateHandle() at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible) at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible) at System.Windows.Forms.AxHost.EndInit() at InfoPathCreateStaThreadTest.FormControlHost.InitializeComponent() in C:\Windows\Temp\InfoPathCreateStaThreadTest\InfoPathCreateStaThreadTest\FormControlHost.Designer.cs:line 65 After some experimenting, I started to suspect this is a message pumping problem. I then came across this, which makes me more strongly suspect so: http://blogs.msdn.com/cbrumme/archive/2004/02/02/66219.aspx I tried various methods of pumping messages with no luck. I should mention that the alternative of automating the InfoPath app is not viable unless I can figure out how to hide the app. Any help would be much appreciated.

  Read the article

• Performance Difference between HttpContext user and Thread user

  - by atrueresistance

  I am wondering what the difference between HttpContext.Current.User.Identity.Name.ToString.ToLower and Thread.CurrentPrincipal.Identity.Name.ToString.ToLower. Both methods grab the username in my asp.net 3.5 web service. I decided to figure out if there was any difference in performance using a little program. Running from full Stop to Start Debugging in every run. Dim st As DateTime = DateAndTime.Now Try 'user = HttpContext.Current.User.Identity.Name.ToString.ToLower user = Thread.CurrentPrincipal.Identity.Name.ToString.ToLower Dim dif As TimeSpan = Now.Subtract(st) Dim break As String = "nothing" Catch ex As Exception user = "Undefined" End Try I set a breakpoint on break to read the value of dif. The results were the same for both methods. dif.Milliseconds 0 Integer dif.Ticks 0 Long Using a longer duration, loop 5,000 times results in these figures. Thread Method run 1 dif.Milliseconds 125 Integer dif.Ticks 1250000 Long run 2 dif.Milliseconds 0 Integer dif.Ticks 0 Long run 3 dif.Milliseconds 0 Integer dif.Ticks 0 Long HttpContext Method run 1 dif.Milliseconds 15 Integer dif.Ticks 156250 Long run 2 dif.Milliseconds 156 Integer dif.Ticks 1562500 Long run 3 dif.Milliseconds 0 Integer dif.Ticks 0 Long So I guess what is more prefered, or more compliant with webservice standards? If there is some type of a performance advantage, I can't really tell. Which one scales to larger environments easier?

  Read the article

• Set HttpContext.Current.User from Thread.CurrentPrincipal

  - by Argons

  I have a security manager in my application that works for both windows and web, the process is simple, just takes the user and pwd and authenticates them against a database then sets the Thread.CurrentPrincipal with a custom principal. For windows applications this works fine, but I have problems with web applications. After the process of authentication, when I'm trying to set the Current.User to the custom principal from Thread.CurrentPrincipal this last one contains a GenericPrincipal. Am I doing something wrong? This is my code: Login.aspx protected void btnAuthenticate_Click(object sender, EventArgs e) { Authenticate("user","pwd"); FormsAuthenticationTicket authenticationTicket = new FormsAuthenticationTicket(1, "user", DateTime.Now, DateTime.Now.AddMinutes(30), false, ""); string ticket = FormsAuthentication.Encrypt(authenticationTicket); HttpCookie authenticationCookie = new HttpCookie(FormsAuthentication.FormsCookieName, ticket); Response.Cookies.Add(authenticationCookie); Response.Redirect(FormsAuthentication.GetRedirectUrl("user", false)); } Global.asax (This is where the problem appears) protected void Application_AuthenticateRequest(object sender, EventArgs e) { HttpCookie authCookie = Context.Request.Cookies[FormsAuthentication.FormsCookieName]; if (authCookie == null) return; if (HttpContext.Current.User != null && HttpContext.Current.User.Identity.IsAuthenticated && HttpContext.Current.User.Identity is FormsIdentity) { HttpContext.Current.User = System.Threading.Thread.CurrentPrincipal; //Here the value is GenericPrincipal } Thanks in advance for any help. }

  Read the article

• problem in working with thread

  - by Xaver

  Ihave the tree view in which i have file system of logical disk. When user select some files and folders and press button programm evaluate the size of selected files and folders. this function may takes a long time. i decide do thread which will run this function. This function works with array of TreeNode. but then i want to now was it node expaned or not compiler say: "attempt to access control "treeview1" not from the thread, in which it was created." Why it appeared? Next code is show how i create array of Nodes which i send to new thread: void frmMain::FillSelected(TreeNode^ a, array<TreeNode^>^ *Paths) { if (a->Parent == nullptr) { for(int j = 0;j < a->Nodes->Count;j++) { if ((a->Nodes[j]->ImageIndex == 1)&&(a->Nodes[j]->Checked==true)) { (*Paths)->Resize((*Paths), (*Paths)->Length + 1); (*Paths)[(*Paths)->Length-1] = a->Nodes[j]; } } } for(int i = 0;i < a->Nodes->Count;i++) { if (a->Parent == nullptr) { FillSelected(a->Nodes[i], Paths); } else { if(a->Nodes[i]->Checked == true) { (*Paths)->Resize((*Paths), (*Paths)->Length + 1); (*Paths)[(*Paths)->Length-1] = a->Nodes[i]; } if ((a->Nodes[i]->Nodes->Count > 0)&&(a->Nodes[i]->Nodes[0]->FullPath != (a->Nodes[i]->FullPath + "\\"))) { FillSelected(a->Nodes[i], Paths); } } } return; }

  Read the article

• [Cocoa] Placing an NSTimer in a separate thread

  - by ndg

  I'm trying to setup an NSTimer in a separate thread so that it continues to fire when users interact with the UI of my application. This seems to work, but Leaks reports a number of issues - and I believe I've narrowed it down to my timer code. Currently what's happening is that updateTimer tries to access an NSArrayController (timersController) which is bound to an NSTableView in my applications interface. From there, I grab the first selected row and alter its timeSpent column. From reading around, I believe what I should be trying to do is execute the updateTimer function on the main thread, rather than in my timers secondary thread. I'm posting here in the hopes that someone with more experience can tell me if that's the only thing I'm doing wrong. Having read Apple's documentation on Threading, I've found it an overwhelmingly large subject area. NSThread *timerThread = [[[NSThread alloc] initWithTarget:self selector:@selector(startTimerThread) object:nil] autorelease]; [timerThread start]; -(void)startTimerThread { NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; NSRunLoop *runLoop = [NSRunLoop currentRunLoop]; activeTimer = [[NSTimer scheduledTimerWithTimeInterval:1.0 target:self selector:@selector(updateTimer:) userInfo:nil repeats:YES] retain]; [runLoop run]; [pool release]; } -(void)updateTimer:(NSTimer *)timer { NSArray *selectedTimers = [timersController selectedObjects]; id selectedTimer = [selectedTimers objectAtIndex:0]; NSNumber *currentTimeSpent = [selectedTimer timeSpent]; [selectedTimer setValue:[NSNumber numberWithInt:[currentTimeSpent intValue]+1] forKey:@"timeSpent"]; } -(void)stopTimer { [activeTimer invalidate]; [activeTimer release]; }

  Read the article

• Creating WPF components in background thread

  - by mizipzor

  Im working on a reporting system, a series of DocumentPage are to be created through a DocumentPaginator. These documents include a number of WPF components that are to be instantiated so the paginator includes the correct things when later sent to the XpsDocumentWriter (which in turn is sent to the actual printer). My problem now is that the DocumentPage instances take quite a while to create (enough for Windows to mark the application as frozen) so I tried to create them in a background thread, which is problematic since WPF expects the attributes on them to be set from the GUI thread. I would also like to have a progress bar showing up, indicating how many pages have been created so far. Thus, it looks like Im trying to get two things to happen in parallell on the GUI. The problem is hard to explain and Im really not sure how to tackle it. In short: Create a series of DocumentPage's. These include WPF components These are to be created on a background thread, or use some other trick so the application isnt frozen. After each page is created, a WPF ProgressBar should be updated. If there is no decent way to do this, alternate solutions and approaches are more than welcome.

  Read the article

• Performing selectors on main thread with NSInvocation

  - by kpower

  I want to perform animation on main thread (cause UIKit objects are not thread-safe), but prepare it in some separate thread. I have (baAnimation - is CABasicAnimation allocated & inited before): SEL animationSelector = @selector(addAnimation:forKey:); NSString *keyString = @"someViewAnimation"; NSInvocation *inv = [NSInvocation invocationWithMethodSignature:[workView.layer methodSignatureForSelector:animationSelector]]; [inv setTarget:workView.layer]; [inv setSelector:animationSelector]; [inv setArgument:baAnimation atIndex:2]; [inv setArgument:keyString atIndex:3]; [inv performSelectorOnMainThread:@selector(invoke) withObject:nil waitUntilDone:NO]; I get: *** +[NSCFString length]: unrecognized selector sent to class 0x1fb36a0 Calls: > #0 0x020984e6 in objc_exception_throw > #1 0x01f7e8fb in +[NSObject doesNotRecognizeSelector:] > #2 0x01f15676 in ___forwarding___ > #3 0x01ef16c2 in __forwarding_prep_0___ > #4 0x01bb3c21 in -[CALayer addAnimation:forKey:] > #5 0x01ef172d in __invoking___ > #6 0x01ef1618 in -[NSInvocation invoke] But [workView.layer addAnimation:baAnimation forKey:@"someViewAnimation"]; works fine. What am I doing wrong?

  Read the article

• Spawning a thread in python

  - by morpheous

  I have a series of 'tasks' that I would like to run in separate threads. The tasks are to be performed by separate modules. Each containing the business logic for processing their tasks. Given a tuple of tasks, I would like to be able to spawn a new thread for each module as follows. from foobar import alice, bob charles data = getWorkData() # these are enums (which I just found Python doesn't support natively) :( tasks = (alice, bob, charles) for task in tasks # Ok, just found out Python doesn't have a switch - @#$%! # yet another thing I'll need help with then ... switch case alice: #spawn thread here - how ? alice.spawnWorker(data) No prizes for guessing I am still thinking in C++. How can I write this in a Pythonic way using Pythonic 'enums' and 'switch'es, and be able to run a module in a new thread. Obviously, the modules will all have a class that is derived from a ABC (abstract base class) called Plugin. The spawnWorker() method will be declared on the Plugin interface and defined in the classes implemented in the various modules. Maybe, there is a better (i.e. Pythonic) way of doing all this?. I'd be interested in knowing

  Read the article

• Thread loses Message after wait() and notify()

  - by fugu2.0

  Hey Guys! I have a problem handling messages in a Thread. My run-method looks like this public void run() { Looper.prepareLooper(); parserHandler = new Handler { public void handleMessage(Message msg) { Log.i("","id from message: "+msg.getData.getString("id")); // handle message this.wait(); } } } I have several Activities sending messages to this thread, like this: Message parserMessage = new Message(); Bundle data = new Bundle(); data.putString("id", realId); data.putString("callingClass", "CategoryList"); parserMessage.setData(data); parserMessage.what = PARSE_CATEGORIES_OR_PRODUCTS; parserHandler = parser.getParserHandler(); synchronized (parserHandler) { parserHandler.notify(); Log.i("","message ID: " + parserMessage.getData().getString("id")); } parserHandler.sendMessage(parserMessage); The problem is that the run-method logs "id from message: null" though "message ID" has a value in the Log-statement. Why does the message "lose" it's data when being send to the thread? Has it something to do with the notify? Thanks for your help

  Read the article

• Thread Locking CollectionViewSource

  - by Robert

  I added an event handler to my code and it broke all access to the CollectionViewSources in the SystemHTA class saying "The calling thread cannot access this object because a different thread owns it". My class was working when "this.systemHTA = new SystemHTA();" was placed outside of the DeviceManager_StateChanged() function. public partial class MainWindow : Window { private DeviceManager DeviceManager = DeviceManager.Instance; public SystemHTA systemHTA; public MainWindow() { InitializeComponent(); } private void Window_Loaded(object sender, RoutedEventArgs e) { DeviceManager.StateChanged += new EventHandler<DeviceManagerStateChangedEventArgs>(DeviceManager_StateChanged); DeviceManager.Initialize(); } void DeviceManager_StateChanged(object sender, DeviceManagerStateChangedEventArgs e) { if (e.State == DeviceManagerState.Operational) { this.systemHTA = new SystemHTA(); } } private void button1_Click(object sender, RoutedEventArgs e) { this.systemHTA.GetViewSourceTest(); } } public class SystemHTA { private CollectionViewSource _deviceTestSource; public SystemHTA() { _deviceTestSource = new CollectionViewSource(); _deviceTestSource.Source = CreateLoadData<HWController>.ControllerCollection; } public void GetViewSourceTest() { ListCollectionView view = (ListCollectionView)_deviceTestSource.View; //This creates an error saying a thread already owns _deviceTestSource } }

  Read the article

• creating QT gui using a thread in c++?

  - by rashid

  I am trying to create this QT gui using a thread but no luck. Below is my code. Problem is gui never shows up. /*INCLUDES HERE... .... */ using namespace std; struct mainStruct { int s_argc;<br> char ** s_argv; }; typedef struct mainStruct mas; void *guifunc(void * arg); int main(int argc, char * argv[]) { mas m;<br> m.s_argc = argc;<br> m.s_argv = argv;<br> pthread_t threadGUI; //start a new thread for gui int result = pthread_create(&threadGUI, NULL, guifunc, (void *) &m); if (result) {<br> printf("Error creating gui thread"); exit(0); } return 0; } void *guifunc(void * arg) { mas m = *(mas *)arg; QApplication app(m.s_argc,m.s_argv); //object instantiation<br> guiClass *gui = new guiClass(); //show gui<br> gui->show(); app.exec(); <br> }

  Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >