Search Results

Search found 6545 results on 262 pages for 'usb hub'.

Page 63/262 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >

  • Live CD boot/installation problem, blank screen - 12.04

    - by traubi
    I'm trying to install ubuntu-12.04-desktop-amd64 from my usb stick. When booting from usb I instantly get a blank screen (with a grey box at the left bottom) I checked the live system with my laptop.works well except it also starts of with a black screen and a grey box at the bottom. I figure the Problem is my geforce gtx 570 since older versions of Ubuntu where only able to boot with xforcevesa and nomodeset. Unfortunately I can't change the boot parameters. I tried the alternate version for a text based install, but it has the same problem. If I press Esc in the alternate I get a message box with two buttons but no text. I would be happy for any advice on this matter

    Read the article

  • Choppy/unresponsive keyboard and mouse pointer until suspend

    - by Stefan Thyberg
    I had a problem where my mouse and keyboard would be choppy, the mouse pointer would work at 1-2 fps and the keyboard would keep missing letters as I was typing them. Since they were both USB I suspected there was a problem there immediately. Whenever I got this problem I would suspend the computer and start it again and the problem would be gone. The problem started appearing when I plugged the mouse and keyboard directly into the computer rather than the USB hub in the screen. I'm using a Logitech UltraX Flat and a Razer Lachesis, but I'm not sure if that matters.

    Read the article

  • Prolific PL2303 and Ubuntu 12.04 (english)

    - by eli
    I am having the same issue as posted here Prolific PL2303 and Ubuntu 12.04 (only in english). The usb to serial adapter worked fine on 11.10 but after upgrade to 12.04 it is not recognized in lusb. if i connect the device after boot and then run: dmesg | grep tty i get: [ 101.305275] usb 2-1.4.4: pl2303 converter now attached to ttyUSB3 seems like it is working fine, but a running the command few seconds later adds the line: [ 107.788672] pl2303 ttyUSB3: pl2303 converter now disconnected from ttyUSB3 after this the device is no longer detected at all. any suggestions??

    Read the article

  • Printing to a printer connected to a wireless router

    - by mspencer
    I have a Netgear WNDR4500 wireless router which allows me to print wirelessly to a printer connected to it via a USB cable. However, the software used to print to it only works for Windows and OS X. I've seen the question Printing to a printer attached to a network USB hub, and tried the instructions it gave using my router's IP address, but when I print a test page it says copying data then says printer is in use. In the printer queue window it says not connected. How can I print to the printer using Ubuntu? Thanks.

    Read the article

  • Changing internal home network ip address for connected devices

    - by oshirowanen
    I have a few computers at home. For each of the computers, I can see the internal home network ip address on any given device by typing in ifconfig in the terminal. If the device is connected to the home network via ethernet connection or via the built-in wireless connections in laptops, the internal ip address for each of the devices seems to be 192.168.0.X. However, when I connect one of the devices using an external usb modem wireless adapter, which connects to the home network through wireless, when I check the ip address via ifconfig, for some reason it gets assigned 192.168.42.X instead. Why are the ethernet and build in wireless connections getting 192.168.0.X, but the external usb wireless adapter gets 192.168.42.X? Most importantly, is it possible to force it to get an internal ip address of 192.168.0.X?

    Read the article

  • Can't boot from liveUSB when trying to install it alongside Windows 7

    - by ali
    I'm very noob at Linux and installing techniques. I want to install 12.04 from bootable usb flash alongside Windows 7 (also tried live CD but not working) but computer is not booting from USB flash or LIVE-CD and boots windows 7 (Acer Aspire 4750g) and of course I have set the BIOS priority in the right way. There is one important point to tell that I have installed Fedora 16 on my laptop successfully and now I have it on my system. When I was trying to install Fedora I got some error and searched about it and got this point that I should delete a .efi file and then installation went right. In this case , what should I do to solve the problem? (I also don't need my Fedora anymore).

    Read the article

  • How to force Empathy Internet Messaging to change default webcam?

    - by user43430
    I just recently bought a new webcam. It is USB powered. For personal reasons, I wish to not use the built in webcam that came with my netbook. I want to use this new one. I love empathy, it is a great chat client. But, I can't seem to switch my default webcam in empathy from the built in webcam, to the one I just bought. So, is there a way to force empathy to use the USB powered webcam, rather than the built in webcam?

    Read the article

  • Mount to /dev/sdb1 without password

    - by Jarmo
    I am unable to mount a USB drive (or SD card) to my system without root access. When I plug in a USB drive, it is visible in the left column of Nautilus, but when I click on it to open it, I receive the error message Unable to mount 2.1 GB Filesystem Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/sdb1 I am able to mount the drive using sudo mount -w /dev/sdb1, but this causes problems for operations such as creating startup discs, which requires unmounting and remounting the drive. I suspect this problem may be caused by the fact that when I upgraded from 11.10 to 12.04, I had an SD card plugged in. This caused the system to stall during later startups, as it could not find this drive. I remedied this by editing a line of /etc/fstab to read /dev/sdb1 /media/sdb1 vfat noauto 0 0 However, I am dual booting Ubuntu with Windows XP, and I have no problem mounting the C: drive of the Windows system without root access, so I feel that this is a problem related to the mount point rather than mounting in general.

    Read the article

  • How do I connect a Nexus 7 to transfer files?

    - by gotqn
    I want to move some files from my PC to Nexus 7. The tablet is connected to my PC's USB port and it is successfully charging. Unfortunately, the PC is not detecting the devices - what I expected is to be shown the Nexus 7 tablet as external devices (like my USB flash memory). As the tablet is connected to the my home internet network, I have checked if it will appear in the "Networks" section but it does not. I am using Ubuntu 12.4 LTS. Is there a easy way to connect the devices to my PC and move some information between them?

    Read the article

  • Choppy/unresponsive keyboard and mouse pointer until suspend

    - by Stefan Thyberg
    I had a problem where my mouse and keyboard would be choppy. The mouse pointer would work at "1-2 fps" and the keyboard would keep missing letters as i was typing them. Since both are USB-Devices, i suspected a problem there immediately, so whenever i got this problem, i would suspend the computer and start it again, for the problem to be gone. The problem started appearing when I plugged the mouse and keyboard directly into the computer rather than the USB-Hub in the screen. I'm using a Logitech UltraX Flat and a Razer Lachesis, on a Dell Latitude E6510.

    Read the article

  • GRUB- error: no such partition grub rescue and Error: No default or UI configuration directive found boot > on pendrive

    - by Ash
    I have dell inspiron, previously I installed Ubuntu 11.10 on my Windows 7 and made it dual boot. But since I want to upgrade my Ubuntu version and change the partition spacing, I deleted 11.10 partition directly and extended my hardrive space (Windows + Ubuntu) at that moment everything was fine. Then I prepared a 12.04 32bit USB and installed it . It was installed but isn't showing dual boot option like 11.10 and my machine directly boot into Windows 7. So instantly i again deleted my 12.04 partition . Now I login into Windows 7 but whenever I put USB ( with 12.04 ) to boot from it, I am facing error of "no such partition grub rescue" even though I try to put lower version(11.04) it showing another error "Error: No default or UI configuration directive found boot " I have reinstall Windows 7 and reformat all partition, still I am facing same error :(

    Read the article

  • ubuntu booting problem with 12-04

    - by Jazzy
    i installed ubuntu through USB .. instillation was proper. but when i restarted my laptop it dint boot. so planed install it again when started selected install from USB. it booted ma previous installed ubuntu.. so after wen ubuntu boots no need of that pen drive.. so in short .. eveny time i want to start my pc i need that pendrive to boot .. so please help me out this. PS : sorry for the english

    Read the article

  • Over-Current condition on port 7 or 8

    - by Dymatic
    I am having a problem with my USB ports. It shows over-current conditions on ports 7 and 8. I have heard that this is caused by a damaged USB port, and since it is detecting it on two ports it seems that I have two that are broken. I do indeed have two that do not work, so that is not the issue. What I would like to do is disable whatever program is running over-current condition checks. tty's are unusable at this point. Every few second a new over-current condition occurs. Here is the output of dmesg: http://pastebin.com/CuFKRGue Is there an easy way to disable these checks or damage the ports to a point where it will no longer check? Fixing them is not important or an option.

    Read the article

  • Ubuntu 14.04 liveusb boot screen graphic errors

    - by user568109
    I am trying to install Ubuntu 14.04 on my Lenovo Y500 laptop. It came preinstalled with Windows 8. I want to install it in a separate partition with a USB drive. I have tried both Unetbootin and universal usb installer. But for some reason the screen after booting is crappy. The screen goes blank after selecting try ubuntu or install. If I try with nomodeset option the screen only displays on a small strip on the top. Which again is split into three. Each seem to be identical. It is not decent enough to begin installation. The graphic card in my laptop is Nvidia GT650M, if it helps. Maybe the problem is related to that. Can anyone help in fixing this error when installing Ubuntu.

    Read the article

  • Does Hauppauge WinTVR 900H work with Digital TV in the UK

    - by SimplySimon
    I have been trying to sort out my Hauppauge WinTV 900H USB Tuner. Here in the UK, we do not have Analogue TV any more as we are fully converted to digital. I have had this working in Windows a while ago, but am having no joy in Ubuntu 13.04 all I get is a blue screen and no settings for the UK. Can anyone advise me how to set this up on my laptop. I have tried: Does Hauppauge WinTV HVR-900 (r2) [USB ID 2040:6502] work with ubuntu 12.04 LTS? I am using TVTime I have also read this page, which makes me think that this unit can only receive Analogue signals, which are no longer transmitted in the UK (which could be my problem!) Laptop Specifications: Intel® Core™ i3-2350M CPU @ 2.30GHz × 4 Intel® Sandybridge Mobile 6MB RAM Any advice would be greatly appreciated.

    Read the article

  • Installing along side of Windows 8

    - by Jake
    It appears as though many people are having problems installing Ubuntu along side Windows 8. My problem, however, seems to be sufficiently different to be unique among such problems. I can't get the Ubuntu 12.10 live-USB installer to run. When I boot I get the following four options: Run from this USB Install to disk Check memory (I can't remember the last one) I have tried the top two. Both result in the screen going black briefly then windows 8 booting as per usual. Does anyone know how I may manage to overcome this problem?

    Read the article

  • Where is EasUS coming from?

    - by Malcolm Lawrie
    I have downloaded the Universal USB Installer and Ubuntu 12.04 Desktop as described on your site. I installed it to a 16Gb USB stick including the format option. Now when I try to boot from the stick into Ubuntu I get a couple of lines of script then a screen with EasUS Todo Backup with Backup. Recovery, Clone and Tools options, but no sign of Ubuntu starting. Where is the start Ubuntu option please? I can find no reference to EaseUS on your help pages.

    Read the article

  • External hard-drive is "clicking" when idle [closed]

    - by mirumir
    I'm struggling with a very annoying issue: My new hard-drive (Samsung Spinpoint M8 1TB (HN-M101MBB) was build in an USB 3.0 external case (Lian Li EX-10QR) and formatted with ext4. When this hard-drive is connected to my Notebook via USB 2.0 it "klicks", the LED flashs too, every second, but only when it's idle! It stays silent, when something is copying or reading from it. But when this drive was formatted with ext3 or fat, it always remained silent. This also happens with a Western Digital WD10JPVT Scorpio Blue, but the "klicks" are even louder! System: 12.04 64-bit with Gnome-Shell. Any ideas how to approach this issue?

    Read the article

  • How do i allow non-root access to /ttyUSB0 on 12.04?

    - by yurividal
    Since i updated from 10.04 to 12.04, i am unable to acces the device connected in /ttyUSB0 if i dont have root access. To be more specific, i use a usb-to-serial com port converter to acces and configure Cisco equipment with a software called Putty. It happens that, since i upgraded to 12.04, Putty only sees the connected device when i run it as "gksudo putty". If not, it says "unable to connect to port /ttyUSB0". I have managed to change the permissions via chmod 666, and it works, but if i disconnect the usb and reconnect, it goes back to root only. How do i permanently allow non-root access? I have a clue it might be via udev rules, but i have NO IDEIA how to do it. obs. Manufacturer and drivers "PROLIFIC"

    Read the article

  • How to access the SD card through my Sony Ericsson Xperia Arc Phone?

    - by user16364
    I have a Sony Ericsson Xperia Arc phone and I cannot access its SD card through the USB cable provided. I have set the USB connection mode to MSC yet when I connect the phone to my computer I cannot see the SD card (or anything for that matter). The Disk Utility however, does see an SEMC Mass Storage device but it says that no media was detected. I have validated that the SD card works as I removed it from the camera and plugged it into a card reader and saw all the photos and files stored on it. I have validated that the phone works as I have connected it (in MSC mode) to my wife's Windows 7 computer. Can anyone please tell me how I can access the SD card on my phone.

    Read the article

  • Backup networks

    - by MegaBrutal
    My USB Wi-Fi adapter tends to overheat and when it happens, it stops working until I pull it out and plug it in again. Since I often access my machine remotely from other places, when it happens, my machine gets inaccessible for me until I get home to fix it. I'm thinking, I have another USB Wi-Fi adapter in spare. Would it be possible to plug it in that too but tell Ubuntu to only use it when the primary Wi-Fi adapter becomes off-line? (I won't use the other Wi-Fi adapter as primary because it provides significantly less quality.)

    Read the article

  • How to access the SD card through my Sony Ericsson Xperia Arc Phone?

    - by user16364
    I have a Sony Ericsson Xperia Arc phone and I cannot access its SD card through the USB cable provided. I have set the USB connection mode to MSC yet when I connect the phone to my computer I cannot see the SD card (or anything for that matter). The Disk Utility however, does see an SEMC Mass Storage device but it says that no media was detected. I have validated that the SD card works as I removed it from the camera and plugged it into a card reader and saw all the photos and files stored on it. I have validated that the phone works as I have connected it (in MSC mode) to my wife's Windows 7 computer. Can anyone please tell me how I can access the SD card on my phone.

    Read the article

  • Unable to stop TOSHIBA TransMemory

    - by user66498
    I have a USB,when I choose safety remove, occur this error message.How to solve the problem? Unable to stop TOSHIBA TransMemory Error detaching: helper exited with exit code 1: Detaching device /dev/sdb USB device: /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2) SYNCHRONIZE CACHE: synchronize cache(10): Fixed format, current; Sense key: Key=9 Additional sense: Logical unit not ready, cause not reportable Info fld=0x0 [0] FAILED: No such file or directory (Continuing despite SYNCHRONIZE CACHE failure.) STOP UNIT: start stop unit: transport: Host_status=0x07 [DID_ERROR] Driver_status=0x00 [DRIVER_OK, SUGGEST_OK] FAILED: No such file or directory

    Read the article

  • Lenovo S10 Ideapad will not boot while original hard drive is installed, neither from hard drive or

    - by aki
    Hello, first time posting here so I'll try to be very clear. I have a Lenovo S10 Ideapad netbook which fails to boot to an OS. It shows the Lenovo splash screen and can get to the BIOS but it doesn't get to GRUB (was dual booting Ubuntu 9.10 and Win 7, was working fine for months, ie this isn't a new dual boot gone bad). After the splash screen it displays a flashing cursor in the upper left corner. Power cycled to no avail. Here is what I have done trying to narrow the problem down: The machine will boot to Ubuntu using an install/live USB drive, but only if ANOTHER hard drive is installed or NO hard drive is installed. The boot order always lists USB first. Also, there is a 2 gb RAM upgrade but I think that's fine; the Ubuntu USB drive boots fine with it, and "free" sees the whole 2gb of memory. So it seems like the hard drive is bad. I was able to put the bad drive in a different laptop and mount it to recover files. I'm ready to replace the bad hard drive, but I would like to know if this situation makes any sense. If the hard drive is bad, shouldn't I still be able to boot with the Ubuntu USB drive while the bad drive is installed? I would have expected the machine to boot into Ubuntu anyway even if with a bad drive, since the boot order lists USB first. But it seems that when the bad drive is installed, the machine ignores the USB drive and hangs with the flashing cursor. Thanks for any ideas! Sorry for the long post, I just want to put all the info I have up front! Basically I'm going to buy a new drive, but I am mostly curious if this is a typical or at least not unusual situation.

    Read the article

  • What is the replacement of the floppy

    - by alexanderpas
    While CD (and to an lesser extend DVD) disks have reached the price-point of the floppy, they have one significant downside, it is WORM (Write-Once Read-Many) media, allowing it to be used only one single time, and you need to be explicit in writing the data to the actual media (you need to burn it.) While CD-RW solves the "use only once" problem, it is still EWORM (Erasable Write-Once Read-Many) media, which still means you need to be explicit in writing the data to the actual media (you still need to burn it.), and also, you still need to be very explicit in erasing it. (simple delete is not possible.) Okay, we can use a CD-RW in Packet Writing mode, however the downside to that, is that this mode is not very universal, and also, not the native mode of the media. Now, while USB-sticks and SD-cards may not have the poblems of the CD, they have a whole other kind of problem: their PRICE! USB-sticks and SD cards are generally 10 to 100 times as expensive as diskettes per piece. SD-cards, in addition have an added problem, because they need a reader to operate. While it is a very standard thing, it is not default equipment on the computer like the CD drive or USB port (or historically the diskette drive). You wouldn't give out an USB stick or SD card with a 100 kB text file, not caring weither you would get it back or not. So, to recap: CD & DVD are basically WORM media. SD cards and USB sticks are relatively expensive. SD cards also needs special readers. Diskettes have a very low data-rate Diskettes have a very low storage capacity. Now, is there a media out there that solves all these problems, or is there a way to get (very) small USB sticks or SD cards for a very low price (as they're the closest thing to diskette).

    Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >