Search Results

Search found 59442 results on 2378 pages for 'windows photo gallery'.

Page 63/2378 | < Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >

• Windows server 2008R2 routing with single NIC

  - by Fabian

  I'm trying to duplicate a Linux server configuration to a windows server 2008R2 box. Basicaly this linux server acts as a router, but it is doing its job with only 1 interface (1 NIC). Here is the network configuration in place (I cannot change it) : INTERNET <== Router (local ip = 194.168.0.3) <== linux Server (ip : 194.168.0.2). The router is configured with a DMZ to 194.168.0.2, and only allow this IP to connect to internet (Cannot change this router configuration). The linux server is configured with a default gateway to 194.168.0.3, with the option : "Act as router". All other computer on the lan have this configuration (given by DHCP) : IP range : 194.168.0.X MASK : 255.255.255.0 Default gateway : 194.168.0.2 And everything is working perfectly. I'm trying to reproduce this way of routing with only one NIC from a windows server 2008R2, but it seems that you cannnot do it with only one NIC (all exemples I see are refering to 2 NIC with 2 different network). Does someone have an idea how to achieved this in Windows server 2008R2 ? Tx you for your help ! Fabian.

  Read the article

• Microsoft Windows DHCP: Steering IPv4 clients into specific scopes based on MAC

  - by Easter Sunshine

  We have visitors on our campus who bring their own laptops and devices and use our wireless and wired networks. When we receive a copyright infringement notice (typically BitTorrenting), we are required to quarantine that MAC address so that it no longer has Internet access. No matter what website it tries to visit, it is sent to a web page explaining to the user that the device has been quarantined. We have thus far implemented this in ISC DHCP on Linux. We have multiple VLANs with one or more public-IP subnets and one RFC1918 quarantine subnet each. All clients are leased IPs in the public-IP subnet(s) unless you're in a list of known bad MACs. Then, you are sent to the quarantine subnet so that your traffic is unroutable on the Internet (you are isolated by subnet only, not by VLAN). We would like to move to Windows DHCP in light of the IPAM role but I cannot figure out how to replicate this in Windows DHCP 2012 (Assign DHCP IPs for specific MAC prefixes on Windows Server 2008 R2 suggests it was not possible in 2008 R2), even while using policies. So here's what I'd like: The administrator/help desk provides and maintains a list of MAC addresses that are to be quarantined. The DHCP server places those MACs into the quarantine subnet on the respective VLAN, no matter which VLAN the client is in. I don't think reservations would work: We currently have about 300 registered bad MACs and about 12 VLANs. I don't want to make 300 x 12 reservations nor have to add 12 reservations per new MAC address. Not to mention all of the quarantine subnets are /24s. We do not have NPS/NAC. You do not have to register your MAC address get network access. We use Cisco routers/switches. Thanks.

  Read the article

• Vanishing Windows Desktop Shortcut Keys

  - by Henry Keiter

  The Situation Like you, I have many applications that I like to open. I've set up keyboard shortcuts for the most common, by placing a link on the desktop and setting its Shortcut Key property: This is all fine and dandy, most of the time. When I want to bring up the GIMP, I press Ctrl+Alt+G and the GIMP launches. Lovely. The Problem Sometimes--perhaps once a month per desktop shortcut--the shortcut key assignment simply vanishes. I press Ctrl+Alt+G and nothing happens, so I go check the shortcut and see that lo and behold: nothing is there. This happens regularly to all my shortcuts (not all at once). It doesn't matter what keys I assign, and there doesn't seem to be any correlation with particular applications being open or anything of that sort. This has happened on every Windows XP machine I've ever used with any regularity. Obviously what makes this issue particularly obnoxious is that it's not easily reproducible. I have searched long and hard for a solution for (or at least acknowledgement of) this problem, to no avail, so hopefully you guys know something that I don't. I did find this question, where the answers are all basically "use a third-party app", but as far as I could tell that was a slightly different issue, related to Explorer being busy. If the solution for this turns out to be the same, fine, but I'd prefer a native fix if at all possible. Note: I've tagged this with Windows in general because I seem to remember it happening on Windows 7 as well as XP, but I rarely notice it because I use the start-menu search in preference to desktop shortcuts.

  Read the article

• Can Vista Windows Explorer be repaired/fixed?

  - by gurun8

  I'm running Windows Vista Home Premium on a Sony Vaio laptop. I think somehow my Windows Explorer has become corrupted. I don't recall any certain inciting incident like installing an unreputable 3rd party app or hardware failure but just recently my system won't wake after it's been left idle longer that 20 minutes and goes to sleep. I've also had problems launch certain apps, like Adobe InDesign CS3, that just basically freeze the system but leave mouse movements functioning for a short time before freezing the entire system which requires a hard reboot to resolve the freeze. The system seems to run normally when used but I fear there's a looming possibility that this is a house of cards and will all come crashing down soon. My question is this, can Windows Explorer be repaired/fixed? Before reformatting the system and starting over, which is most likely what I'm going to be forced to do, I'd like explore (no pun intended) my options in fixing the problem with a patch or reinstall or something of that nature. Reformatting my system will eat up a day or two of my time and I just don't have the time to spare right now.

  Read the article

• Windows Server 2008 R2 - Cannot Change DNS Domain Context on Some Machines

  - by Richie086

  So I have a small Windows Server 2008 R2 network consisting of a domain controller, a file server, sql server, etc. All machines are joined to a windows domain (CPUSHIELD.COM) and show up in Active Directory Users and Computers under the Computers OU. Each computer has a DNS record as well that was populated when I joined each computer to the domain. However, when I go to my SQL server VM (which is joined to CPUSHIELD.COM) and try to add domain users or groups to the local users or groups on my file server (which is a physical machine) or my sql server (which is a virtual machine), for some reason I cannot change the context to the CPUSHIELD.COM domain.. For example: Here is the really strange thing, I have two other servers on my network that do show CPUSHIELD.COM in the From This Location field (as I would expect with any machine joined to a domain) and I am able to search the local machine and/or domain for users/groups to add. I have done hundreds of Windows Server 2008 installs and this is the first time I have run into this issue. Any ideas? Let me know if you need more info

  Read the article

• Allow incoming connections on Windows Server 2008 R2

  - by Richard-MX

  Good day people. First, im new to Windows Server. I've always used Linux/Apache combo, but, my client has and AWS EC2 Windows Server 2008 R2 instance and he wants everything in there. Im working with IIS and PHP enabled as Fast-CGI and everything is working, but, i cant see the websites stored in it from internet. The public DNS that AWS gave us for that instance is: http://ec2-XX-XXX-XXX-121.us-west-2.compute.amazonaws.com/ But, if i copy paste that address, i get nothing, no IIS logo or something like that. My common sense tells me that maybe the firewall could be blocking the access. Can anyone help me and tell where to enable some rules to get this thing working? I don't wanna start enabling rules at random and make the system insecure. If you need any additional info, you can ask me and i will provide it. Thanks in advance. UPDATE: Amazon EC2 display this: Public DNS: ec2-XX-XXX-XXX-121.us-west-2.compute.amazonaws.com Private DNS: ip-XX-XXX-XX-252.us-west-2.compute.internal Private IPs: XX.XXX.XX.25 In my test microinstance, i just to use the Public DNS address (the one that starts with "ec2") and it works like a charm (of course, the micro instance have its own Public DNS im not assuming same address for both instances...) However, for the large instance, i tried to do the same. Set up everything as in the micro instance but if i use the Public DNS, it doesnt load anything. Im suspicious about the Windows Firewall, but, the HTTP related stuff is enabled. What should i do to get access to the large instance? I don't want to set up the domain yet, i want access from an amazon url. 2ND EDIT: all fixed. Charles pointed that maybe Security Groups was not properly set up for the instance. He was right. Just added HTTP service to the rules and all works good.

  Read the article

• Windows server 2008R2 routing with single NIC

  - by Fabian

  I'm trying to duplicate a Linux server configuration to a windows server 2008R2 box. Basicaly this linux server acts as a router, but it is doing its job with only 1 interface (1 NIC). Here is the network configuration in place (I cannot change it) : INTERNET <== Router (local ip = 194.168.0.3) <== linux Server (ip : 194.168.0.2). The router is configured with a DMZ to 194.168.0.2, and only allow this IP to connect to internet (Cannot change this router configuration). The linux server is configured with a default gateway to 194.168.0.3, with the option : "Act as router". All other computer on the lan have this configuration (given by DHCP) : IP range : 194.168.0.X MASK : 255.255.255.0 Default gateway : 194.168.0.2 And everything is working perfectly. I'm trying to reproduce this way of routing with only one NIC from a windows server 2008R2, but it seems that you cannnot do it with only one NIC (all exemples I see are refering to 2 NIC with 2 different network). Does someone have an idea how to achieved this in Windows server 2008R2 ? Tx you for your help ! Fabian.

  Read the article

• Windows 7 XP Mode-Program not ending properly

  - by iceman33

  We currently have recently have implemented a few new machines to our network with Windows 7 Enterprise 64-bit installed on them. We have a program that is incompatible with Windows 7 right now and we have it installed on the Windows XP Mode that we have setup on there. There is a shortcut that is on the desktop to have it work with integration services and that part is working successfully. Occasionally, this program will stop working over the server on which it connects to has to get rebooted and the program has to get closed out. However, that process that is in the task manager doesn't seem to close out properly. So in order to correctly get the program shut down, we have to make the users log back into xp mode and do a Ctrl+Alt+Delete to kill the process or have to go back into the machine to perform a restart. I was wondering if anyone has come across a way within XP Mode yet that when the virtual machine goes into hibernation mode that it would shut down all processes or if when restarting the virtual machine your normal machine that it would shut everything down in the virtual XP mode as well and not just keep that program running? Any help would be greatly appreciated.

  Read the article

• knife on Windows inconsistently reads ~\.ssh\knife.rb on Management Workstation

  - by gWaldo

  I am implementing a new instance of (Open-source v10.12) Chef in an existing environment. Currently the environment is mostly Windows, but more Linux is being introduced. I have used Chef in a previous gig, however that was a *nix-only environment. Because this is a primarily-Windows environment, my main workstation is Windows 7 (x64), and I use Powershell as my main terminal. I created a ~\.chef directory, populated with a knife.rb and my client.pem file. When I run knife client list from ~, I get the expected results. I keep my work in Dropbox just in case my laptop should fail or be stolen. When I run knife client list from the repo directory (C:\Users\waldo\Dropbox_company\projects\chef`), I get ERROR: Your private key could not be loaded from C:/home/waldo/.chef/waldog.pem Check your configuration file and ensure that your private key is readable (Note that the path is incorrect) This is the progression as I walk up the tree towards my ~ running knife client list: C:\Users\waldo\Dropbox\_company\projects\ => Above error C:\Users\waldo\Dropbox\_company\ => Above error C:\Users\waldo\Dropbox\ => It works! (Expected results) C:\Users\waldo\ => Expected results C:\Users\waldo\Documents\ => Expected Results C:\Users\waldo\Documents\GitHub => Expected Results C:\Users\waldo\Documents\GitHub\aProject\ => Expected Results What. The. Eff! Now, I know that I can add -c path\to\knife.rb, but that's a HUGE PITA. Question is: Why is knife inconsistently reading my ~\.chef\knife.rb, and how can I get around that without incurring carpal tunnel?

  Read the article

• Cannot set video resolution above 640x480 after installing Windows XP SP2

  - by waanders

  I've installed Windows XP SP2 on a computer (there was not SP at all). Now the display settings are set back to 640x480 and 4 bits colors. And I can't change it, it's the only option in Settings tab of the Display dialog of Windows. The screen look awful now, how can I solve this problem? UPDATE: Seems to be a problem with the video driver (thanks @Karan and @Hennes). I did run Speccy (PC-Wizard freezes the computer) and this is a part of the log file: Summary Operating System Microsoft Windows XP Professional 32-bit SP3 CPU Intel Celeron Willamette 0.18um Technology RAM 512 MB DDR @ 133MHz (2.5-3-3-6) Motherboard COMPAQ 0838h (FC-478) Graphics Standard Monitor (640x480@1Hz) Hard Drives 19.0GB Maxtor 2B020H1 (PATA) Optical Drives No optical disk drives detected Audio No audio card detected ... Graphics Monitor Name Standard Monitor on Current Resolution 640x480 pixels Work Resolution 640x450 pixels State enabled, primary Monitor Width 640 Monitor Height 480 Monitor BPP 4 bits per pixel Monitor Frequency 1 Hz Device \\.\DISPLAY1 OpenGL Version 1.1.0 Vendor Microsoft Corporation Renderer GDI Generic GLU Version 1.2.2.0 Microsoft Corporation Values GL_MAX_LIGHTS 8 GL_MAX_TEXTURE_SIZE 1024 GL_MAX_TEXTURE_STACK_DEPTH 10 GL Extensions GL_WIN_swap_hint GL_EXT_bgra GL_EXT_paletted_texture GL_EXT_bgra

  Read the article

• Windows 7 Explorer keeps crashing

  - by Daniel Liang

  I currently have an issue with Windows Explorer. It keeps crashing when I browse through a network drive. This is happening on several computers. I have already obtained a crash dump file but it doesn't state much: Microsoft (R) Windows Debugger Version 6.12.0002.633 X86 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:\LocalDumps\explorer.exe.3964.dmp] User Mini Dump File with Full Memory: Only application data is available Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols Executable search path is: Windows 7 Version 7601 (Service Pack 1) MP (2 procs) Free x86 compatible Product: WinNt, suite: SingleUserTS Machine Name: Debug session time: Mon Oct 21 11:21:30.000 2013 (UTC - 4:00) System Uptime: 0 days 0:06:20.449 Process Uptime: 0 days 0:05:54.000 ................................................................ ................................................................ .... Loading unloaded module list ............. This dump file has an exception of interest stored in it. The stored exception information can be accessed via .ecxr. (f7c.fe4): Access violation - code c0000005 (first/second chance not available) eax=00000000 ebx=07a3f080 ecx=00000400 edx=00000000 esi=00000002 edi=00000000 eip=76e170f4 esp=07a3f030 ebp=07a3f0cc iopl=0 nv up ei pl zr na pe nc cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246 ntdll!KiFastSystemCallRet: 76e170f4 c3 ret I've already tried removing certain context menu items. I disabled all unnecessary start-up items. Ran memtest86 and it looks fine on that end. It also happens when I browse through my local disk. Can anyone take a look into this? Thanks!

  Read the article

• Docking Station Sound Doesn't Work on Dell D830 with Windows 7

  - by cisellis

  I have a Dell Latitude D830 laptop that is running Windows 7 Enterprise x64. I connect to a docking station during the day with multiple monitors, a keyboard and a mouse. Everything runs with no problems including most of the docking station ports (usb, monitors, etc.) However, the sound port from the docking station does not work since the upgrade to Windows-7. Even with the laptop plugged in, the sound always comes out of the laptop, not the headphones plugged into the docking station. Here's what I've tried: I've seen other issues like via Google this that seem to be mostly unanswered. I found one or two that referenced using the Vista x64 drivers, especially the Nvidia drivers. I do not have an Nvidia chipset but I've reinstalled the sound drivers and that has not helped. I don't have a support contract and considering the cost is usually high to call Dell, that's not an option. Dell's forums are pretty much a wasteland and I've found no help there. Since this is a docking station I thought I might need to try the SATA or Intel chipset drivers from the dell site instead, however I'm not really sure and I need to work on this laptop in the meantime. I can't really afford the downtime to experiment with random drivers all day in case they turn out to be incompatible (Dell still hasn't added Windows 7 to their support site as far as I can tell). Does anyone have any other ideas? Has anyone had this issue and solved it? If so, how? Thanks in advance for your help.

  Read the article

• Losing Windows Authentication intermittently

  - by Mark Robinson

  I'm running a website on IIS6 / Server 2003 which uses Integrated Windows Authentication on a local intranet. I can browse to the site but get intermittent "Object null" errors when calling the following C# code which is called on every request: .... GetUserIdFromPrincipal(User) .... public static string GetUserIdFromPrincipal(IPrincipal principal) { return principal.Identity is WindowsIdentity ? (principal.Identity as WindowsIdentity).User.Value : principal.Identity.Name; } (Apologies for the code sample but was torn between SF and SO but think this is more to do with server config). So as the error is intermittent clearly Windows Auth is working on some level but after navigating around the site for several clicks I get the null reference error meaning IPrincipal is null (I thought this should never be null in ASP.NET). The error only happens on this newly built VM. The code is fine on other machines. Does IIS request the Windows Auth details on each request? What would cause such an intermittent problem? Any help or suggestions would be much appreciated.

  Read the article

• Windows Update and lsass.exe

  - by David

  I have a brand new installation of Windows XP (SP1 or older). I installed Norton AntiVirus, Firefox, Putty, and Cygwin. No other software is present. Windows Update finds the following 64 updates: KB905760, KB978262, Internet Explorer 8, KB71961, KB954155, KB968816, KB923561, KB950762, KB949402, KB950974, KB951376, KB951748, KB952004, KB952954, KB955069, KB956572, KB956802, KB956803, KB956844, KB958470, KB958869, KB959426, KB960803, KB960859, KB961501, KB969059, KB970238, KB970238, KB971032, KB971468, KB971657, KB972270, KB973507, KB973815, KB973904, KB974112, KB974318, KB974392, KB975025, KB975560, KB975561, KB975713, .......) When these updates are applied, the system reboots to a black screen with two error messages. The first error message says: lsass.exe - Application Error The application failed to initialize properly (0xc00000142). Click on OK to terminate the application. The second error message says: services.exe - Application Error The application failed to initialize properly (0xc00000142). Click on OK to terminate the application. I then proceed to boot into Safe Mode, use System Restore, and everything works fine again until the 64 updates re-appear in Windows Update. I can see two options: disable Auto-Updates or install each of the 64 updates one at a time until finding the troublesome update. Does anyone have any better ideas?

  Read the article

• HP Laserjet 1320 drivers for Windows 7

  - by RedGrittyBrick

  Background I replaced som XP computers with Win 7 computers. We have a HP Laserjet 1320dn printer attached to the LAN. The XP computers could print to it from Word in duplex mode without any issues. Problem The Win 7 computers downloaded a full set of drivers including a "HP Laserjet 1320 PCL5" driver. However using this, Word's page footers cause extra pages to be printed with just a letter or so at a time from the footer. Some other apps have similar issues. I also have an ancient Laserjet 1200 attached to the LAN via a Jetdirect box and that works just fine. So I don't think the problem is with Word (the computers came with Word 2010 starter). What I tried I wrangled the control-panel new printer dialogue into using a "HP Laserjet 2100 PS" driver for the HP Laserjet 1320dn. Now my Word documents print as they should. However I don't have a duplex option on the print dialogue. I'd really like to be able to use duplex printing. Question Windows used to have a Universal Postscript driver that read a Postscript Printer Definition (PPD) file to make the printer's features available (tray choice, duplex etc). I can't see any way to do this in Windows 7. Is there a way? Is there any other way I can get Windows 7 Home Premium 64-bit to print properly to a HP Laserjet 1320dn and have access to all it's major features? Addendum: My page in Word looks like this: +--------------------+ | aa bb cc | | | | lorem ipsum dolor | | | ... | | | pp qq rr | +--------------------+ The headers and footers were inserted using Insert - header - blank (3 column). When printed I get 1 page with aa, bb, cc, pp in correct position (no other text) 1 blank page 1 page with qq in correct position (no other text) 1 blank page 1 page with rr in correct position (no other text) 1 blank page 1 page with lorem ipsum dolor in correct position (no headers or footers) If I use a Laserjet 2100 driver I get 1 correct page.

  Read the article

• Unable to connect to second name of Windows 2008 Server R2 machine from XP

  - by Tumba

  I used the command netdom computername /add:newname.domainname.com to add a second name to a server running Windows 2008 Server R2. After restarting the server, I had DNS "A" entries for both names. In addition, the second name was added to HKLM\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters\OptionalNames, which I believe should have taken care of any NetBIOS resolution. From my Windows 7 workstation, I can ping both names and running net view on both names reveals the same list of resources. From Windows XP, I can ping both names, but net view only works on the first name. Running net view on the second name returns: System error 52 has occurred. You were not connected because a duplicate name exists on the network. Go to System in Control Panel to change the computer name and try again. What do I need to do to make the second name usable from XP clients? Update: I was able to resolve the problem by adding the REG_DWORD key DisableStrictNameChecking = 1 to HKLM\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters, then restarting the Server service. However, I do not understand why this was necessary.

  Read the article

• Using rsync to migrate files between windows servers: problems with Excel spreadsheets

  - by HorusKol

  We've been migrating about 220 GB of data from a Windows 2003 Server to a Windows 2008 Server, and because of the time it would take to copy that data and the necessity of keeping it available for users, I came up with the idea of using rsync on an Ubuntu server to broker the migration. (I might have gone for a proper Windows solution - but the applications I found were a bit pricey for a one-shot like this - and permissions are not a problem). All well and good - and today I'm making the last sync and confirming that the new server is up-to-date using diff, but I"ve noticed an odd thing with Excel spreadsheets (.xls). Every instance of an Excel spreadsheet that has already been copied in a previous in a previous synchronisation is being marked as "already up-to-date" by rsync. However, when I then run a diff, I'm told that the files differ. I'm manually copying them, as there are but a handful, but I was wondering what might be causing this. No other filetype in the entire 220 GB tree has had any problem like this - just the Excel/xls files. It'd be great if someone could come up with an explanation.

  Read the article

• Could I use Windows 7 instead of Windows SBS 2008 for this server?

  - by Ecyrb

  First off, I'm not a sys admin. I'm just a software developer trying to help out my parents' small business. Right now they have one server, a domain controller with a P4 processor running SBS 2003. They also have this machine hosting QuickBooks, MySQL for the old version of an app, and SQL Server 2008 Express for the new version of the app (which will replace the old eventually). They've been complaining about the workstations being slow so I figured it might help if they bought a new server and moved QuickBooks, MySQL, and SQL Server to the new server, leaving the old server as just a DC. In trying to pick an operating system for their new server, I was thinking about Windows SBS 2008 Standard with enough licenses for seven machines. But that's a lot more money than they're going to want to spend. So then I wondered if there's any real advantage to having a server OS as opposed to just throwing Windows 7 on the new server. It's a lot cheaper and I can't think of any SBS features that it would need if it's just hosting QuickBooks, MySQL, and SQL Server. Would it be okay to use Windows 7 for a server like this? Are there any advantages to using SBS 2008 that I would be missing out on? Any additional tips are much appreciated!

  Read the article

• Connection failed between Windows Servers

  - by Kerby82

  I'm setting up an infrastructure based on Windows Server 2012. The firewall is turned off and I can't access the Domain controller to check for the group policy. I'm experiencing some connection problem between servers. All the servers are running a site on the TCP Port 80 and I check with netstat that the web server is binding on every Ip of the servers. If i try to telnet from the server itself on the port 80 it works (using DNS name) if I try same telnet from another machine I get connection failed. The DNS works, the ping is successfull, the servers are on the same subnet, the firewall is turned off (even though windows advanced firewall says that some settings can be managed by the System Administrator, i guess group policy). I don't know how to troubleshoot further. Do you have any idea? Is that possible that the FW looks turned off but there are some group policy blocking the connections? (I also check group policy-Administrative Template-Network Connections- Windows FW everything is not configured) I need some hint on how to keep troubleshooting such a problem.

  Read the article

• XP VM not detecting USB keyboard or mouse from Windows 7 host

  - by Ian Kemp

  I've been using a Windows XP Pro VM (32-bit, SP3) for months on my work PC (Windows 7 64-bit) with no problems, with a PS/2 keyboard and a standard optical USB mouse. Today I copied this VM onto my home PC, which is also Windows 7 64-bit but with a G15 USB keyboard and MX518 USB mouse. For some reason the VM does not accept input from the keyboard or mouse, which makes it almost impossible to use. (Unity works but is not an option). Both my home and work PC are running VMware player 3.1.0. My keyboard and mouse show up as USB devices in the bottom-right of the VMware Player window, and if I click them I have the standard option to "Connect (Disconnect from host)". I have selected this option for the keyboard, and then the VM happily accepts keyboard input, but of course my host PC no longer does. It seems like VMware is seeing my keyboard and mouse as USB devices and not input devices. I've tried sending the keyboard input to the guest and reinstalling VMware Tools, but that achieved nothing. I'm certain it's a problem with the VM, and not the XP install, as I also can't use F12 to enter the VMware BIOS when the VM is powering up.

  Read the article

• Docking Station Sound Doesn't Work on Dell D830 with Windows 7

  - by cisellis

  EDIT: I can only mark one answer as the correct one but the actual solution was a combination of two comments (updating the BIOS to A15 AND installing the Sigmatel audio drivers). I have a Dell Latitude D830 laptop that is running Windows 7 Enterprise x64. I connect to a docking station during the day with multiple monitors, a keyboard and a mouse. Everything runs with no problems including most of the docking station ports (usb, monitors, etc.) However, the sound port from the docking station does not work since the upgrade to Windows-7. Even with the laptop plugged in, the sound always comes out of the laptop, not the headphones plugged into the docking station. Here's what I've tried: I've seen other issues like via Google this that seem to be mostly unanswered. I found one or two that referenced using the Vista x64 drivers, especially the Nvidia drivers. I do not have an Nvidia chipset but I've reinstalled the sound drivers and that has not helped. I don't have a support contract and considering the cost is usually high to call Dell, that's not an option. Dell's forums are pretty much a wasteland and I've found no help there. Since this is a docking station I thought I might need to try the SATA or Intel chipset drivers from the dell site instead, however I'm not really sure and I need to work on this laptop in the meantime. I can't really afford the downtime to experiment with random drivers all day in case they turn out to be incompatible (Dell still hasn't added Windows 7 to their support site as far as I can tell). Does anyone have any other ideas? Has anyone had this issue and solved it? If so, how? Thanks in advance for your help.

  Read the article

• Desktop appliciations are unable to launch my browser in Windows 8

  - by Chevex

  I have a fresh copy of Windows 8 Pro installed from MSDN. I have Google Chrome installed (stable channel) and it is set as my default browser. I even went into Control Panel Default Programs to ensure that Chrome had all its defaults. When other desktop applications try to launch my browser they always fail. For example, while trying to install the Android SDK for Windows the installer accurately detected that I did not have the JDK installed. It provides a friendly button to visit java.oracle.com. When pressing this button, nothing happens at all. You can see that here: http://youtu.be/XXL8GhuWWg0 If it were only that application that was having issues I wouldn't think anything of it but I have been encountering similar issues all over the place. Probably the most irritating one is when visual studio has updates; clicking the update button does nothing. http://www.youtube.com/watch?v=zwd1mn3TId0 You can see in that screencast that Visual Studio is not able to launch the browser no matter what I click. The update button doesn't do anything and neither do the two links in the update's description. Any suggestions? I'm assuming it's a Windows issue since it is happening in multiple applications. UPDATE: Setting IE as the default browser fixes the issue. So it has something to do with it not being able to launch Chrome programmatically. Is it even possible to workaround this bug or do I have to suffer with IE as default for now?

  Read the article

• Grayed-Out Sleep and Hibernate Options on Windows 7 After Updating Graphics Driver

  - by Maxim Zaslavsky

  I have a Gateway M275 Tablet PC, on which I've installed Windows 7 Ultimate. The laptop is quite old, so there aren't any Win7 drivers for it, not to mention any Vista drivers. Win7 has been working for some time, but I noticed that my video output wasn't working. I went into Device Manager and found that I didn't have a driver for my video card: it just recognized it as the standard one. I searched online and found an XP driver for it, released by Gateway. Device Manager accepted this driver and prompted me to reboot. After that, I noticed that my Sleep and Hibernate options in the Shut Down menu have been grayed-out. I looked online and found that many people are attributing this to display drivers, as such an old driver would surely not be compatible with the standby procedures Windows 7 uses. To make it clear: I was able to Sleep and Hibernate before updating the drivers; now, I can't. Running powercfg /a gives me, "An internal system component has disabled this standby state," for each available standby mode. Is there some way that the driver can be modified to support hibernation? The new driver fixed my video output problem, but I guess hibernation is more important for me. If not, what steps should I take to remove the driver and just leave the standard Windows one, which previously supported hibernation and sleep on this computer? Thanks in advance.

  Read the article

• Windows 7 SSH file server

  - by Siriss

  Hello all- I have looked at the other posts, but have not quite found an answer I have a question about windows file sharing over SSH. I have copssh installed and it is working for Remote desktop connections. I have port 22 forwarded on my router etc. I connect from a Mac or Putty with this address: ssh -l copsshusername 3391:localhost:3389 [external ip] That works fine. I would like to configure Windows 7 to allow my ssh account that I use to login, access to certain shared folders. I have documents and videos and things that I would like to be able to download externally. I have done this before on Linux and a long time ago on XP, but I cannot figure out what I am missing on Windows 7. There is a designated SSH user that copssh uses to run the service and that I use to to login as. I have googled and googled and have not found a solution that does everything I need that is why I am turning here for ideas. I hope I am explaining this correctly. Thank you very much for your help!

  Read the article

• Windows Explorer Keeps On Crashing

  - by Josefvz

  Hey Folks. I'm lost... I'm using Windows 7 Ultimate 64bit. My Pc is up to date(windows updates) and I've used Winutilities to scan my registry. My explorer.exe keeps on crashing. Just randomly it seems. I don't even need to be doing anything particular. I do have experience with pc in general as I'm a software developer. I know you will require additional info, but i don't know what, so just leave a comment and I'll update. Additional info I think i should also mention that explorer is the only app that crashes on my pc. The crash report i got now: Description: A problem caused this program to stop interacting with Windows. Problem signature: Problem Event Name: AppHangB1 Application Name: explorer.exe Application Version: 6.1.7600.16450 Application Timestamp: 4aebab8d Hang Signature: 0a1b Hang Type: 16897 OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 7177 Additional Hang Signature 1: 0a1bdae38ae7300761c516c4416d992c Additional Hang Signature 2: 1c51 Additional Hang Signature 3: 1c518a49cc7d37652d26c521e96f66c2 Additional Hang Signature 4: 521e Additional Hang Signature 5: 521e607ec26a72aab4ae5a7126916ef3 Additional Hang Signature 6: e5e3 Additional Hang Signature 7: e5e3ca31dad607fa7b858ff5ea5c0fa9

  Read the article

< Previous Page | 59 60 61 62 63 64 65 66 67 68 69 70  | Next Page >