Search Results

Search found 24969 results on 999 pages for 'oracle forms upgrade 11g'.

Page 633/999 | < Previous Page | 629 630 631 632 633 634 635 636 637 638 639 640  | Next Page >

• How to backup BOINC

  - by Stephen Judge

  I have BOINC Manager installed from the PPA, version 6.10.17, and I am about to upgrade my Ununtu install with a clean install. I would like to know how I can backup my work done on BOINC so I don't loose what I have already done and have to start from scratch again. For example I am running the Climate Prediction project and it runs for a year or so, I'm at 30% work done so I want to backup that 30% work done. Also as an addition to this, can someone advise me the best way to upgrade BOINC when new versions are released on their website but are not available on the PPA yet. I know you can install BOINC anywhere, but I want to install it to the same place the PPA install does so all my settings and work done is recognised. Thanks in advance.

  Read the article

• Error 255 samba share simple file share Ubuntu 14.04

  - by Rose Offthorns

  I have been using simple file share on Ubuntu 12.04 for several years not a problem now I have up graded to 14.04 all the problems error 255, tried all sights to fix the problem nothing works even went back to 12.04 still the same problem error 255 'net usershare' returned error 255: net usershare add: cannot convert name "Everyone" to a SID. The connection was refused. Maybe smbd is not running. There appears to be a bug with the new upgrade or has there been a new upgrade. Thanks for any help would be appreciated.

  Read the article

• Ghost team foundation build controllers

  - by Martin Hinshelwood

  Quite often after an upgrade there are things left over. Most of the time they are easy to delete, but sometimes it takes a little effort. Even rarer are those times when something just will not go away no matter how much you try. We have had a ghost team build controller hanging around for a while now, and it had defeated my best efforts to get rid of it. The build controller was from our old TFS server from before our TFS 2010 beta 2 upgrade and was really starting to annoy me. Every time I try to delete it I get the message: Controller cannot be deleted because there are build in progress -Manage Build Controller dialog   Figure: Deleting a ghost controller does not always work. I ended up checking all of our 172 Team Projects for the build that was queued, but did not find anything. Jim Lamb pointed me to the “tbl_BuildQueue” table in the team Project Collection database and sure enough there was the nasty little beggar. Figure: The ghost build was easily spotted Adam Cogan asked me: “Why did you suspect this one?” Well, there are a number of things that led me to suspect it: QueueId is very low: Look at the other items, they are in the thousands not single digits ControllerId: I know there is only one legitimate controller, and I am assuming that 6 relates to “zzUnicorn” DefinitionId: This is a very low number and I looked it up in “tbl_BuildDefinition” and it did not exist QueueTime: As we did not upgrade to TFS 2010 until late 2009 a date of 2008 for a queued build is very suspect Status: A status of 2 means that it is still queued This build must have been queued long ago when we were using TFS 2008, probably a beta, and it never got cleaned up. As controllers are new in TFS 2010 it would have created the “zzUnicorn” controller to handle any build servers that already exist. I had previously deleted the Agent, but leaving the controller just looks untidy. Now that the ghost build has been identified there are two options: Delete the row I would not recommend ever deleting anything from the database to achieve something in TFS. It is really not supported. Set the Status to cancelled (Recommended) This is the best option as TFS will then clean it up itself So I set the Status of this build to 2 (cancelled) and sure enough it disappeared after a couple of minutes and I was then able to then delete the “zzUnicorn” controller. Figure: Almost completely clean Now all I have to do is get rid of that untidy “zzBunyip” agent, but that will require rewriting one of our build scripts which will have to wait for now.   Technorati Tags: ALM,TFBS,TFS 2010

  Read the article

• 'Important security update' for Firefox and flash plugin, but the update cannot be selected

  - by geoffrey

  [This question has been updated as I now have the same problem with Firefox in addition to flash plugin] The update manager (on Ubuntu 12.04, 64bit) shows an 'important security update' for flashplugin-installer:i386, firefox, and firefox-globalmenu. The update is unticked, and cannot be selected, and therefore cannot be updated (I can update other packages without problems). Actually the flashplugin-installer package does not appear to be installed on my computer (judging from the Software Centre). I can't remember how I installed flash, probably directly from the Adobe website. The updater asks me if I want to do a partial upgrade. When running sudo apt-get update && sudo apt-get upgrade from terminal, I get the following: The following packages have been kept back: firefox firefox-globalmenu flashplugin-installer:i386

  Read the article

• How to restore your production database without needing additional storage

  - by David Atkinson

  Production databases can get very large. This in itself is to be expected, but when a copy of the database is needed the database must be restored, requiring additional and costly storage.  For example, if you want to give each developer a full copy of your production server, you'll need n times the storage cost for your n-developer team. The same is true for any test databases that are created during the course of your project lifecycle. If you've read my previous blog posts, you'll be aware that I've been focusing on the database continuous integration theme. In my CI setup I create a "production"-equivalent database directly from its source control representation, and use this to test my upgrade scripts. Despite this being a perfectly valid and practical thing to do as part of a CI setup, it's not the exact equivalent to running the upgrade script on a copy of the actual production database. So why shouldn't I instead simply restore the most recent production backup as part of my CI process? There are two reasons why this would be impractical. 1. My CI environment isn't an exact copy of my production environment. Indeed, this would be the case in a perfect world, and it is strongly recommended as a good practice if you follow Jez Humble and David Farley's "Continuous Delivery" teachings, but in practical terms this might not always be possible, especially where storage is concerned. It may just not be possible to restore a huge production database on the environment you've been allotted. 2. It's not just about the storage requirements, it's also the time it takes to do the restore. The whole point of continuous integration is that you are alerted as early as possible whether the build (yes, the database upgrade script counts!) is broken. If I have to run an hour-long restore each time I commit a change to source control I'm just not going to get the feedback quickly enough to react. So what's the solution? Red Gate has a technology, SQL Virtual Restore, that is able to restore a database without using up additional storage. Although this sounds too good to be true, the explanation is quite simple (although I'm sure the technical implementation details under the hood are quite complex!) Instead of restoring the backup in the conventional sense, SQL Virtual Restore will effectively mount the backup using its HyperBac technology. It creates a data and log file, .vmdf, and .vldf, that becomes the delta between the .bak file and the virtual database. This means that both read and write operations are permitted on a virtual database as from SQL Server's point of view it is no different from a conventional database. Instead of doubling the storage requirements upon a restore, there is no 'duplicate' storage requirements, other than the trivially small virtual log and data files (see illustration below). The benefit is magnified the more databases you mount to the same backup file. This technique could be used to provide a large development team a full development instance of a large production database. It is also incredibly easy to set up. Once SQL Virtual Restore is installed, you simply run a conventional RESTORE command to create the virtual database. This is what I have running as part of a nightly "release test" process triggered by my CI tool. RESTORE DATABASE WidgetProduction_virtual FROM DISK=N'C:\WidgetWF\ProdBackup\WidgetProduction.bak' WITH MOVE N'WidgetProduction' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_WidgetProduction_Virtual.vmdf', MOVE N'WidgetProduction_log' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_log_WidgetProduction_Virtual.vldf', NORECOVERY, STATS=1, REPLACE GO RESTORE DATABASE mydatabase WITH RECOVERY   Note the only change from what you would do normally is the naming of the .vmdf and .vldf files. SQL Virtual Restore intercepts this by monitoring the extension and applies its magic, ensuring the 'virtual' restore happens rather than the conventional storage-heavy restore. My automated release test then applies the upgrade scripts to the virtual production database and runs some validation tests, giving me confidence that were I to run this on production for real, all would go smoothly. For illustration, here is my 8Gb production database: And its corresponding backup file: Here are the .vldf and .vmdf files, which represent the only additional used storage for the new database following the virtual restore.   The beauty of this product is its simplicity. Once it is installed, the interaction with the backup and virtual database is exactly the same as before, as the clever stuff is being done at a lower level. SQL Virtual Restore can be downloaded as a fully functional 14-day trial. Technorati Tags: SQL Server

  Read the article

• Book Review (Book 10) - The Information: A History, a Theory, a Flood

  - by BuckWoody

  This is a continuation of the books I challenged myself to read to help my career - one a month, for year. You can read my first book review here, and the entire list is here. The book I chose for March 2012 was: The Information: A History, a Theory, a Flood by James Gleick. I was traveling at the end of last month so I’m a bit late posting this review here. Why I chose this book: My personal belief about computing is this: All computing technology is simply re-arranging data. We take data in, we manipulate it, and we send it back out. That’s computing. I had heard from some folks about this book and it’s treatment of data. I heard that it dealt with the basics of data - and the semantics of data, information and so on. It also deals with the earliest forms of history of information, which fascinates me. It’s similar I was told, to GEB which a favorite book of mine as well, so that was a bonus. Some folks I talked to liked it, some didn’t - so I thought I would check it out. What I learned: I liked the book. It was longer than I thought - took quite a while to read, even though I tend to read quickly. This is the kind of book you take your time with. It does in fact deal with the earliest forms of human interaction and the basics of data. I learned, for instance, that the genesis of the binary communication system is based in the invention of telegraph (far-writing) codes, and that the earliest forms of communication were expensive. In fact, many ciphers were invented not to hide military secrets, but to compress information. A sort of early “lol-speak” to keep the cost of transmitting data low! I think the comparison with GEB is a bit over-reaching. GEB is far more specific, fanciful and so on. In fact, this book felt more like something fro Richard Dawkins, and tended to wander around the subject quite a bit. I imagine the author doing his research and writing each chapter as a book that followed on from the last one. This is what possibly bothered those who tended not to like it, I think. Towards the middle of the book, I think the author tended to be a bit too fragmented even for me. He began to delve into memes, biology and more - I think he might have been better off breaking that off into another work. The existentialism just seemed jarring. All in all, I liked the book. I recommend it to any technical professional, specifically ones involved with data technology in specific. And isn’t that all of us? :)

  Read the article

• Adding nodes to MAAS server

  - by Yasith Tharindu

  I was able to install MAAS server using ubuntu 12.04. Then boot up nodes from he PXE. Then installed maas-precise-x86-64-commissioning through pxe. Now the installation is done. but im unable to commission with the MAAS server. It does not show it as a node and neither im unable to add it manually and end up with following error. Also what is the default username password for maas-precise-x86-64-commissioning. Im unable to login. This error when adding node manually. ERROR 2012-11-20 08:32:54,500 maas.maasserver ################################ Exception: timed out ################################ ERROR 2012-11-20 08:32:54,501 maas.maasserver Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/django/core/handlers/base.py", line 111, in get_response response = callback(request, *callback_args, **callback_kwargs) File "/usr/lib/python2.7/dist-packages/django/views/decorators/vary.py", line 22, in inner_func response = func(*args, **kwargs) File "/usr/lib/python2.7/dist-packages/piston/resource.py", line 166, in call result = self.error_handler(e, request, meth, em_format) File "/usr/lib/python2.7/dist-packages/piston/resource.py", line 164, in call result = meth(request, *args, **kwargs) File "/usr/lib/python2.7/dist-packages/maasserver/api.py", line 251, in dispatcher self, request, request.method, *args, **kwargs) File "/usr/lib/python2.7/dist-packages/maasserver/api.py", line 193, in perform_api_operation return method(handler, request, *args, **kwargs) File "/usr/lib/python2.7/dist-packages/maasserver/api.py", line 493, in new node = create_node(request) File "/usr/lib/python2.7/dist-packages/maasserver/api.py", line 418, in create_node return form.save() File "/usr/lib/python2.7/dist-packages/maasserver/forms.py", line 234, in save node = super(NodeWithMACAddressesForm, self).save() File "/usr/lib/python2.7/dist-packages/django/forms/models.py", line 363, in save fail_message, commit, construct=False) File "/usr/lib/python2.7/dist-packages/django/forms/models.py", line 85, in save_instance instance.save() File "/usr/lib/python2.7/dist-packages/maasserver/models.py", line 114, in save return super(CommonInfo, self).save(*args, **kwargs) File "/usr/lib/python2.7/dist-packages/django/db/models/base.py", line 460, in save self.save_base(using=using, force_insert=force_insert, force_update=force_update) File "/usr/lib/python2.7/dist-packages/django/db/models/base.py", line 570, in save_base created=(not record_exists), raw=raw, using=using) File "/usr/lib/python2.7/dist-packages/django/dispatch/dispatcher.py", line 172, in send response = receiver(signal=self, sender=sender, **named) File "/usr/lib/python2.7/dist-packages/maasserver/provisioning.py", line 485, in provision_post_save_Node profile, power_type, preseed_data) File "/usr/lib/python2.7/dist-packages/maasserver/provisioning.py", line 245, in call result = self.method(*args) 259,1 93% result = self.method(*args) File "/usr/lib/python2.7/xmlrpclib.py", line 1224, in call return self._send(self._name, args) File "/usr/lib/python2.7/xmlrpclib.py", line 1578, in _request verbose=self._verbose File "/usr/lib/python2.7/xmlrpclib.py", line 1264, in request return self.single_request(host, handler, request_body, verbose) File "/usr/lib/python2.7/xmlrpclib.py", line 1294, in single_request response = h.getresponse(buffering=True) File "/usr/lib/python2.7/httplib.py", line 1030, in getresponse response.begin() File "/usr/lib/python2.7/httplib.py", line 407, in begin version, status, reason = self._read_status() File "/usr/lib/python2.7/httplib.py", line 365, in _read_status line = self.fp.readline() File "/usr/lib/python2.7/socket.py", line 447, in readline data = self._sock.recv(self._rbufsize) timeout: timed out

  Read the article

• Adding attachments to HumanTasks *beforehand*

  - by ccasares

  For an demo I'm preparing along with a partner, we need to add some attachments to a HumanTask beforehand, that is, the attachment must be associated already to the Task by the time the user opens its Form. How to achieve this?, indeed it's quite simple and just a matter of some mappings to the Task's input execData structure. Oracle BPM supports "default" attachments (which use BPM tables) or UCM-based ones. The way to insert attachments for both methods is pretty similar. With default attachments When using default attachments, first we need to have the attachment payload as part of the BPM process, that is, must be contained in a variable. Normally the attachment content is binary, so we'll need first to convert it to a base64-string (not covered on this blog entry). What we need to do is just to map the following execData parameters as part of the input of the HumanTask: execData.attachment[n].content            <-- the base64 payload data execData.attachment[n].mimeType           <-- depends on your attachment                                               (e.g.: "application/pdf") execData.attachment[n].name               <-- attachment name (just the name you want to                                               use. No need to be the original filename) execData.attachment[n].attachmentScope    <-- BPM or TASK (depending on your needs) execData.attachment[n].storageType        <-- TASK execData.attachment[n].doesBelongToParent <-- false (not sure if this one is really                                               needed, but it definitely doesn't hurt) execData.attachment[n].updatedBy          <-- username who is attaching it execData.attachment[n].updatedDate        <-- dateTime of when this attachment is                                               attached  Bear in mind that the attachment structure is a repetitive one. So if you need to add more than one attachment, you'll need to use XSLT mapping. If not, the Assign mapper automatically adds [1] for the iteration.  With UCM-based attachments With UCM-based attachments, the procedure is basically the same. We'll need to map some extra fields and not to map others. The tricky part with UCM-based attachments is what we need to know beforehand about the attachment itself. Of course, we don't need to have the payload, but a couple of information from the attachment that must be checked in already in UCM. First, let's see the mappings: execData.attachment[n].mimeType           <-- Document's dFormat attribute (1) execData.attachment[n].name               <-- attachment name (just the name you want to                                               use. No need to be the original filename) execData.attachment[n].attachmentScope    <-- BPM or TASK (depending on your needs) execData.attachment[n].storageType        <-- UCM execData.attachment[n].doesBelongToParent <-- false (not sure if this one is really                                               needed, but it definitely doesn't hurt) execData.attachment[n].updatedBy          <-- username who is attaching it execData.attachment[n].updatedDate        <-- dateTime of when this attachment is                                               attached  execData.attachment[n].uri                <-- "ecm://<dID>" where dID is document's dID                                      attribute (2) execData.attachment[n].ucmDocType         <-- Document's dDocType attribute (3) execData.attachment[n].securityGroup      <-- Document's dSecurityGroup attribute (4) execData.attachment[n].revision           <-- Document's dRevisionID attribute (5) execData.attachment[n].ucmMetadataItem[1].name  <-- "DocUrl" execData.attachment[n].ucmMetadataItem[1].type  <-- STRING execData.attachment[n].ucmMetadataItem[1].value <-- Document's url attribute (6)  Where to get those (n) fields? In my case I get those from a Search call to UCM (not covered on this blog entry) As I mentioned above, we must know which UCM document we're going to attach. We may know its ID, its name... whatever we need to uniquely identify it calling the IDC Search method. This method returns ALL the info we need to attach the different fields labeled with a number above.  The only tricky one is (6). UCM Search service returns the url attribute as a context-root without hostname:port. E.g.: /cs/groups/public/documents/document/dgvs/mdaw/~edisp/ccasareswcptel000239.pdf However we do need to include the full qualified URL when mapping (6). Where to get the http://<hostname>:<port> value? Honestly, I have no clue. What I use to do is to use a BPM property that can always be modified at runtime if needed. There are some other fields that might be needed in the execData.attachment structure, like account (if UCM's is using Accounts). But for demos I've never needed to use them, so I'm not sure whether it's necessary or not. Feel free to add some comments to this entry if you know it ;-)  That's all folks. Should you need help with the UCM Search service, let me know and I can write a quick entry on that topic.

  Read the article

• Cooperator Framework

  - by csharp-source.net

  Cooperator Framework is a base class library for high performance Object Relational Mapping (ORM), and a code generation tool that aids agile application development for Microsoft .Net Framework 2.0/3.0. The main features are: * Use business entities. * Full typed Model (Data Layer and Entities) * Maintain persistence across the layers by passing specific types( .net 2.0/3.0 generics) * Business objects can bind to controls in Windows Forms and Web Forms taking advantage of data binding of Visual Studio 2005. * Supports any Primary Key defined on tables, with no need to modify it or to create a unique field. * Uses stored procedures for data access. * Supports concurrency. * Generates code both for stored procedures and projects in C# or Visual Basic. * Maintains the model in a repository, which can be modified in any stage of the development cycle, regenerating the model on demand.

  Read the article

• MIX 2010 Covert Operations Day 1

  - by GeekAgilistMercenary

  Portland Departure - Farewell Stumptown Off I go on a plane from Portland, Oregon to Las Vegas, Nevada for the MIX 2010 Conference.  Before I even boarded the plane I met Paul Gomes a Senior Software Engineer and Andrew Saylor the Director of Business Development.  Both of these SoftSource Employees were en route to MIX themselves.  Being stoked to already be bumping into some top tier people, I bid them adieu and headed for my seat on the plane. I boarded, and had before the boarding opted for an upgrade.  I have to advise that if you get a chance on Alaska to upgrade at the last minute, take it.  It is usually only about $50 bucks or so and the additional space makes working on the ole' laptop actually possible (even on my monstrous 17" laptop).  So take it from me, click that upgrade button and fork over that $50 bucks for anything over an hour flight, the comfort and ability to work is usually worth it! Las Vegas Arrival - Welcome to Sin City Got into Las Vegas and swung out of the airport.  I then, with my comrade Beth attempted to get Internet Access for the next 3 hours.  Las Vegas, is not the most friendly Internet Access town.  I will just say it, I am not sure why any Internet related company (ala Microsoft) would hold a conference here.  There are more than a dozen other cities that would be better. But I digress, I did manage to get Internet Access after checking into the Circus Circus.  Don't ask why I ended up staying here, if you run into me in person, ask then because there is a whole story to it. At this point I started checking out each session further on the MIX10 Site.  There are a number I deemed necessary to check out.  However, you'll have to read my pending entries to see which session I jumped into. With this juncture in time reached, I got a ton of work to wrap up, some code to write and some sleep to get.  Until tomorrow, adieu. For more of my writing, thoughts, and other topics check out my other blog, where the original entry is posted.

  Read the article

• Remote install of Ubuntu Server

  - by David Walker

  Hi all, I have a machine located 500 miles away that's running Ubuntu 8.04. I figure it's just about time that I upgrade to the latest LTS. However, there's a software raid (md_raid) in there, and I'm afraid that just a dist-upgrade when I switch over the sources.list will end with catastrophic failure. Like a panic on boot that the raid'd disk can't be read, or something else. First, hoping that's not the case, however, if it ends up happening I'm wondering if there's a means of having someone drop in a Ubuntu 10.04 server install disk, and flip on ssh, and some means for me to hop on and re-run the installer remotely. Is this feasible? If so, what would one need to do aside run apt-get install ssh on the target machine? I do have friends who can be in front of the target machine to initiate the process, just not execute it out.

  Read the article

• Does Azure only support ASP.NET MVC applications and if so how should I adapt my design?

  - by RPK

  I am writing a small ASP.NET Web Application. My worries are that I want to keep the architecture same giving me the option to install it on an Intranet or on a Cloud Platform. I am not using MVC but lately learned that Azure only supports ASP.NET MVC applications. I want to know whether ASP.NET Web Forms application work on Azure/AppHarbor or not. Do I need to convert this application to MVC if Web Forms is not supported? Will the same application run on Intranet as well?

  Read the article

• How should I report this problem?

  - by Sinan Aykut

  I use Ubuntu 11.04 Alpha in daily use and yesterday I've made an upgrade (apt-get dist-upgrade) after restart, I could not access to the desktop. Just the wallpaper and cursor... I've tried to open it in safe mode, but no luck. Before sending a bug report for this problem, Id like to know some things: 1) Which logs I should consider before sending a bug report? I think this issue is related to updated X.org or Unity desktop files 2) Is there any CLI way to turn my Unity desktop back to the classic one? Thanks.

  Read the article

• APT wedged by kernel version mismatch

  - by Leopd

  Apt is seemingly unable to do anything useful for me, repeatedly giving messages of this form: dpkg: dependency problems prevent configuration of linux-server: linux-server depends on linux-image-server (= 3.2.0.37.44); however: Version of linux-image-server on system is 3.2.0.37.45. linux-server depends on linux-headers-server (= 3.2.0.37.44); however: Version of linux-headers-server on system is 3.2.0.37.45. dpkg: error processing linux-server (--configure): dependency problems - leaving unconfigured This is basically the same problem as I cannot install any package (linux-image-server, linux-server dependencies errors) which got closed Duplicate to an answer that is totally useless for this situation. None of the advice in that very generic answer about dependencies helps. Explicitly: sudo apt-get clean sudo apt-get autoclean sudo apt-get update all have no not effect. While sudo apt-get -f install sudo dpkg --configure -a sudo apt-get -u dist-upgrade sudo apt-get -o Debug::pkgProblemResolver=yes dist-upgrade all give some form of the error message above.

  Read the article

• Script to only execute during first install of a package

  - by Jeroen

  I recently started packaging up some of my software and publishing it on Launchpad. The installation and removal works fine, but upgrading the package form one version to the next version is problematic. The problem is that there are some scripts that only need to run during the first installation of the package. These scripts populate the DB, create a user, etc. They are currently called in the package.postinst configure) section. However this results in them being called during an upgrade as well as shown in the diagram. Is there a way to include a maintainer script in a .deb package that only executes during the first installation of the package and not during an upgrade? Or what would be an elegant way to include some initial setup scripts in a .deb package?

  Read the article

• Concerns on first ASP.NET cloud application

  - by RPK

  I am writing a small ASP.NET Web Application. My worries are that I want to keep the architecture same giving me the option to install it on an Intranet or on a Cloud Platform. I am not using MVC but lately learned that Azure only supports ASP.NET MVC applications. I want to know whether ASP.NET Web Forms application work on Azure/AppHarbor or not. Do I need to convert this application to MVC if Web Forms is not supported? Will the same application run on Intranet as well?

  Read the article

• Why should we use low level languages if a high level one like python can do almost everything? [closed]

  - by killown

  I know python is not suitable for things like microcontrolers, make drivers etc, but besides that, you can do everything using python, companys get stuck with speed optimizations for real hard time system but does forget other factors which one you can just upgrade your hardware for speed proposes in order to get your python program fit in it, if you think how much cust can the company have to maintain a system written in C, the comparison is like that: for example: 10 programmers to mantain a system written in c and just one programmer to mantain a system written in python, with python you can buy some better hardware to fit your python program, I think that low level languages tend to get more cost, since programmers aren't so cheaply than a hardware upgrade, then, this is my point, why should a system be written in c instead of python?

  Read the article

• Basic Form Properties and Modality in VB.NET

  Creating your First VB.NET Form 1. Launch Microsoft Visual Basic 2008 Express Edition. If you do not have this program, then you cannot create VB.NET forms. You can read an introductory tutorial on how to install Visual Basic on your computer: http://www.aspfree.com/c/a/VB.NET/Visual-Basic-for-Beginners/ 2. Go to File - gt; New Project. 3. Since you will be creating a form, select Windows Forms Application. 4. Select a name for your form project, e.g. MyFirstForm. 5. Hit OK to get started. 6. You will then see an empty form -- just like an empty canvas when you paint. It looks like th...

  Read the article

• Is ASP.NET MVC completely (and exclusively) based on conventions?

  - by Mike Valeriano

  --TL;DR Is there a "Hello World!" ASP.NET MVC tutorial out there that doesn't rely on conventions and "stock" projects? Is it even possible to take advantage of the technology without reusing the default file structure, and start from a single "hello_world.asp" file or something (like in PHP)? Am I completely mistaken and I should be looking somewhere else, maybe this? I'm interested in the MVC framework, not Web Forms --Background I've played a bit with PHP in the past, just for fun, and now I'm back to it since web development became relevant for me once again. I'm no professional, but I try to gain as much knowledge and control over the technology I'm working with as possible. I'm using Visual Studio 2012 for C# - my "desktop" language of choice - and since I got the Professional Edition from Dreamspark, the Web Development Tools are available, including ASP.NET MVC 4. I won't touch Web Forms, but the MVC Framework got my attention because the MVC pattern is something I can really relate to, since it provides the control I want but... not quite. Learning PHP was easy - and right form the start I could just create a "hello_world.php" file and just do something like this for immediate results: <!-- file: hello_world.php --> <?php> echo "Hello World!"; <?> But I couldn't find a single ASP.NET (MVC) tutorial out there (I'll be sure to buy one of the upcoming MVC 4 books, only a month away or so) that would start like that. They all start with a sample project, building up knowledge from the basics and heavily using conventions as they go along. Which is fine, I suppose, but it's now the best way for me to learn things. Even the "Empty" project template for a new ASP.NET MVC 4 Application in VS2012 is not empty at all: several files and folders are created for you - much like a new C# desktop application project, but with C# I can in fact start from scratch, creating the project structure myself. It is not the case with PHP: I can choose from a plethora of different MVC frameworks I can just create my own framework I can just skip frameworks altogether, and toss random PHP along with my HTML on a single file and make it work I understand the framework needs to establish some rules, but what if I just want to create a single page website with some C# logic behind it? Do I really need to create a whole bloat of files and folders for the sake of convention? Also, please understand that I haven't gotten far on any of those tutorials mainly because of this reason, but, if that's the only way to do it, I'll go for it using one of the books I've mentioned before. This is my first contact with ASP.NET but from the few comparisons I've read, I believe I should stay the hell away from Web Forms. Thank you. (Please forgive the broken English - it is not my primary language.)

  Read the article

• New Software on Ubuntu Hardy Heron(8.04)

  - by tuxi

  I am using ubuntu 8.04 because of my hardware restrictions. I followed the steps to install latest firefox as i can use but i get firefox 3.6 could not found response: For Ubuntu 8.04 (Hardy) Users deb http://ppa.launchpad.net/ubuntu-mozilla-daily/ppa/ubuntu hardy main deb-src http://ppa.launchpad.net/ubuntu-mozilla-daily/ppa/ubuntu hardy main Save and exit the file Now you need to add PPA GPG key sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 247510BE Update the source list sudo apt-get update Install Firefox 3.6 sudo apt-get install firefox-3.6 If you already have a version of Firefox 3.5 installed from a repo then upgrade using the following command sudo apt-get upgrade

  Read the article

• Zmanda's Data Backup: Enterprise Quality, SMB Prices

  With an upgrade to its flagship Amanda Enterprise Edition data backup and disaster recovery software, Zmanda brings enterprise-grade capabilities to SMB.

  Read the article

• Package information was last updated 59 days ago even though Ubuntu is up to date

  - by Luuz

  I'm using ubuntu 11.10 and in the update manager I have a message that says package information last updated 59 days ago press the check button to check for software updates I do that, but i'm up to date. I checked other threads with this same problem, and saw i should do sudo apt-get update in a terminal to see which repository is not up to date and when I did, I got this message: Failed to fetch http://extras.ubuntu.com/ubuntu/dists/oneiric/Release Then I checked for this repository in software sources but couldn't find this specific one. In my /etc/apt/sources.list.d I have only one line: deb http://archive.canonical.com/ubuntu oneiric partner #Added by software-center So now I don't know what to do more. Should I upgrade to 12.04 and will it solve my problem? I wouldn't want to upgrade if there is a problem in the last version but I don't know much about Ubuntu so, can anyone help me please? Thank you!!

  Read the article

• Is there a simpler way to create a borderless window with XNA 4.0?

  - by Cypher

  When looking into making my XNA game's window border-less, I found no properties or methods under Game.Window that would provide this, but I did find a window handle to the form. I was able to accomplish what I wanted by doing this: IntPtr hWnd = this.Window.Handle; var control = System.Windows.Forms.Control.FromHandle( hWnd ); var form = control.FindForm(); form.FormBorderStyle = System.Windows.Forms.FormBorderStyle.None; I don't know why but this feels like a dirty hack. Is there a built-in way to do this in XNA that I'm missing?

  Read the article

• Sorting and Filtering By Model-Based LOV Display Value

  - by Steven Davelaar

  If you use a model-based LOV and you use display type "choice", then ADF nicely displays the display value, even if the table is read-only. In the screen shot below, you see the RegionName attribute displayed instead of the RegionId. This is accomplished by the model-based LOV, I did not modify the Countries view object to include a join with Regions.  Also note the sort icon, the table is sorted by RegionId. This sorting typically results in a bug reported by your test team. Europe really shouldn't come before America when sorting ascending, right? To fix this, we could of course change the Countries view object query and add a join with the Regions table to include the RegionName attribute. If the table is updateable, we still need the choice list, so we need to move the model-based LOV from the RegionId attribute to the RegionName attribute and hide the RegionId attribute in the table. But that is a lot of work for such a simple requirement, in particular if we have lots of model-based choice lists in our view object. Fortunately, there is an easier way to do this, with some generic code in your view object base class that fixes this at once for all model-based choice lists that we have defined in our application. The trick is to override the method getSortCriteria() in the base view object class. By default, this method returns null because the sorting is done in the database through a SQL Order By clause. However, if the getSortCriteria method does return a sort criteria the framework will perform in memory sorting which is what we need to achieve sorting by region name. So, inside this method we need to evaluate the Order By clause, and if the order by column matches an attribute that has a model-based LOV choicelist defined with a display attribute that is different from the value attribute, we need to return a sort criterria. Here is the complete code of this method: public SortCriteria[] getSortCriteria() {   String orderBy = getOrderByClause();          if (orderBy!=null )   {     boolean descending = false;     if (orderBy.endsWith(" DESC"))      {       descending = true;       orderBy = orderBy.substring(0,orderBy.length()-5);     }     // extract column name, is part after the dot     int dotpos = orderBy.lastIndexOf(".");     String columnName = orderBy.substring(dotpos+1);     // loop over attributes and find matching attribute     AttributeDef orderByAttrDef = null;     for (AttributeDef attrDef : getAttributeDefs())     {       if (columnName.equals(attrDef.getColumnName()))       {         orderByAttrDef = attrDef;         break;       }     }     if (orderByAttrDef!=null && "choice".equals(orderByAttrDef.getProperty("CONTROLTYPE"))          && orderByAttrDef.getListBindingDef()!=null)     {       String orderbyAttr = orderByAttrDef.getName();       String[] displayAttrs = orderByAttrDef.getListBindingDef().getListDisplayAttrNames();       String[] listAttrs = orderByAttrDef.getListBindingDef().getListAttrNames();       // if first list display attributes is not the same as first list attribute, than the value       // displayed is different from the value copied back to the order by attribute, in which case we need to       // use our custom comparator       if (displayAttrs!=null && listAttrs!=null && displayAttrs.length>0 && !displayAttrs[0].equals(listAttrs[0]))       {                  SortCriteriaImpl sc1 = new SortCriteriaImpl(orderbyAttr, descending);         SortCriteria[] sc = new SortCriteriaImpl[]{sc1};         return sc;                           }     }     }   return super.getSortCriteria(); } If this method returns a sort criteria, then the framework will call the sort method on the view object. The sort method uses a Comparator object to determine the sequence in which the rows should be returned. This comparator is retrieved by calling the getRowComparator method on the view object. So, to ensure sorting by our display value, we need to override this method to return our custom comparator: public Comparator getRowComparator() {   return new LovDisplayAttributeRowComparator(getSortCriteria()); } The custom comparator class extends the default RowComparator class and overrides the method compareRows and looks up the choice display value to compare the two rows. The complete code of this class is included in the sample application.  With this code in place, clicking on the Region sort icon nicely sorts the countries by RegionName, as you can see below. When using the Query-By-Example table filter at the top of the table, you typically want to use the same choice list to filter the rows. One way to do that is documented in ADF code corner sample 16 - How To Customize the ADF Faces Table Filter.The solution in this sample is perfectly fine to use. This sample requires you to define a separate iterator binding and associated tree binding to populate the choice list in the table filter area using the af:iterator tag. You might be able to reuse the same LOV view object instance in this iterator binding that is used as view accessor for the model-bassed LOV. However, I have seen quite a few customers who have a generic LOV view object (mapped to one "refcodes" table) with the bind variable values set in the LOV view accessor. In such a scenario, some duplicate work is needed to get a dedicated view object instance with the correct bind variables that can be used in the iterator binding. Looking for ways to maximize reuse, wouldn't it be nice if we could just reuse our model-based LOV to populate this filter choice list? Well we can. Here are the basic steps: 1. Create an attribute list binding in the page definition that we can use to retrieve the list of SelectItems needed to populate the choice list <list StaticList="false" Uses="LOV_RegionId"               IterBinding="CountriesView1Iterator" id="RegionId"/>  We need this "current row" list binding because the implicit list binding used by the item in the table is not accessible outside a table row, we cannot use the expression #{row.bindings.RegionId} in the table filter facet. 2. Create a Map-style managed bean with the get method retrieving the list binding as key, and returning the list of SelectItems. To return this list, we take the list of selectItems contained by the list binding and replace the index number that is normally used as key value with the actual attribute value that is set by the choice list. Here is the code of the get method:  public Object get(Object key) {   if (key instanceof FacesCtrlListBinding)   {     // we need to cast to internal class FacesCtrlListBinding rather than JUCtrlListBinding to     // be able to call getItems method. To prevent this import, we could evaluate an EL expression     // to get the list of items     FacesCtrlListBinding lb = (FacesCtrlListBinding) key;     if (cachedFilterLists.containsKey(lb.getName()))     {       return cachedFilterLists.get(lb.getName());     }     List<SelectItem> items = (List<SelectItem>)lb.getItems();     if (items==null || items.size()==0)     {       return items;     }     List<SelectItem> newItems = new ArrayList<SelectItem>();     JUCtrlValueDef def = ((JUCtrlValueDef)lb.getDef());     String valueAttr = def.getFirstAttrName();     // the items list has an index number as value, we need to replace this with the actual     // value of the attribute that is copied back by the choice list     for (int i = 0; i < items.size(); i++)     {       SelectItem si = (SelectItem) items.get(i);       Object value = lb.getValueFromList(i);       if (value instanceof Row)       {         Row row = (Row) value;         si.setValue(row.getAttribute(valueAttr));                 }       else       {         // this is the "empty" row, set value to empty string so all rows will be returned         // as user no longer wants to filter on this attribute         si.setValue("");       }       newItems.add(si);     }     cachedFilterLists.put(lb.getName(), newItems);     return newItems;   }   return null; } Note that we added caching to speed up performance, and to handle the situation where table filters or search criteria are set such that no rows are retrieved in the table. When there are no rows, there is no current row and the getItems method on the list binding will return no items.  An alternative approach to create the list of SelectItems would be to retrieve the iterator binding from the list binding and loop over the rows in the iterator binding rowset. Then we wouldn't need the import of the ADF internal oracle.adfinternal.view.faces.model.binding.FacesCtrlListBinding class, but then we need to figure out the display attributes from the list binding definition, and possible separate them with a dash if multiple display attributes are defined in the LOV. Doable but less reuse and more work. 3. Inside the filter facet for the column create an af:selectOneChoice with the value property of the f:selectItems tag referencing the get method of the managed bean:  <f:facet name="filter">   <af:selectOneChoice id="soc0" autoSubmit="true"                       value="#{vs.filterCriteria.RegionId}">     <!-- attention: the RegionId list binding must be created manually in the page definition! -->                       <f:selectItems id="si0"                    value="#{viewScope.TableFilterChoiceList[bindings.RegionId]}"/>   </af:selectOneChoice> </f:facet> Note that the managed bean is defined in viewScope for the caching to take effect. Here is a screen shot of the tabe filter in action: You can download the sample application here. 

  Read the article

• Databinding a ListView with Mono for Android

  - by Wallym

  The world lives on data. Data is all around us and in many forms: salespeople need to know what customers have spent; twitter users want to know what their friends are saying. How do we as developers present data to a user? In Android, we use the ListView in its various forms. In this article, we'll look at using a ListView, how we can work with it, then discuss what we need to do to overcome some of the challenges in a mobile environment.Article url: http://visualstudiomagazine.com/articles/2012/09/14/databind-a-listview.aspx

  Read the article

< Previous Page | 629 630 631 632 633 634 635 636 637 638 639 640  | Next Page >