Search Results

Search found 18096 results on 724 pages for 'let'.

Page 636/724 | < Previous Page | 632 633 634 635 636 637 638 639 640 641 642 643  | Next Page >

  • LUKS with LVM, mount is not persistent after reboot

    - by linxsaga
    I have created a Logical vol and used luks to encrypt it. But while rebooting the server. I get a error message (below), therefore I would have to enter the root pass and disable the /etc/fstab entry. So mount of the LUKS partition is not persistent during reboot using LUKS. I have this setup on RHEL6 and wondering what i could be missing. I want to the LV to get be mount on reboot. Later I would want to replace it with UUID instead of the device name. Error message on reboot: "Give root password for maintenance (or type Control-D to continue):" Here are the steps from the beginning: [root@rhel6 ~]# pvcreate /dev/sdb Physical volume "/dev/sdb" successfully created [root@rhel6 ~]# vgcreate vg01 /dev/sdb Volume group "vg01" successfully created [root@rhel6 ~]# lvcreate --size 500M -n lvol1 vg01 Logical volume "lvol1" created [root@rhel6 ~]# lvdisplay --- Logical volume --- LV Name /dev/vg01/lvol1 VG Name vg01 LV UUID nX9DDe-ctqG-XCgO-2wcx-ddy4-i91Y-rZ5u91 LV Write Access read/write LV Status available # open 0 LV Size 500.00 MiB Current LE 125 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 [root@rhel6 ~]# cryptsetup luksFormat /dev/vg01/lvol1 WARNING! ======== This will overwrite data on /dev/vg01/lvol1 irrevocably. Are you sure? (Type uppercase yes): YES Enter LUKS passphrase: Verify passphrase: [root@rhel6 ~]# mkdir /house [root@rhel6 ~]# cryptsetup luksOpen /dev/vg01/lvol1 house Enter passphrase for /dev/vg01/lvol1: [root@rhel6 ~]# mkfs.ext4 /dev/mapper/house mke2fs 1.41.12 (17-May-2010) Filesystem label= OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) Stride=0 blocks, Stripe width=0 blocks 127512 inodes, 509952 blocks 25497 blocks (5.00%) reserved for the super user First data block=1 Maximum filesystem blocks=67633152 63 block groups 8192 blocks per group, 8192 fragments per group 2024 inodes per group Superblock backups stored on blocks: 8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409 Writing inode tables: done Creating journal (8192 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 21 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. [root@rhel6 ~]# mount -t ext4 /dev/mapper/house /house PS: HERE I have successfully mounted: [root@rhel6 ~]# ls /house/ lost+found [root@rhel6 ~]# vim /etc/fstab -> as follow /dev/mapper/house /house ext4 defaults 1 2 [root@rhel6 ~]# vim /etc/crypttab -> entry as follows house /dev/vg01/lvol1 password [root@rhel6 ~]# mount -o remount /house [root@rhel6 ~]# ls /house/ lost+found [root@rhel6 ~]# umount /house/ [root@rhel6 ~]# mount -a -> SUCCESSFUL AGAIN [root@rhel6 ~]# ls /house/ lost+found Please let me know if I am missing anything here. Thanks in advance.

    Read the article

  • Why doesn't Apache start from xampp control panel after changes to vhosts config?

    - by Grafica
    I'm running xampp on my local server, and want to host multiple sites, so I changed the httpd-vhosts.conf file. Will somebody let me know if there is something wrong with my code? Apache was running while I had only one site in the config, but after I added another site, I stopped apache, and I'm not able to restart it. # # Virtual Hosts # # If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. Most configurations # use only name-based virtual hosts so the server doesn't need to worry about # IP addresses. This is indicated by the asterisks in the directives below. # # Please see the documentation at # <URL:http://httpd.apache.org/docs/2.2/vhosts/> # for further details before you try to setup virtual hosts. # # You may use the command line option '-S' to verify your virtual host # configuration. # # Use name-based virtual hosting. # ##NameVirtualHost *:80 # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for all requests that do not # match a ServerName or ServerAlias in any <VirtualHost> block. # ##<VirtualHost *:80> ##ServerAdmin [email protected] ##DocumentRoot "C:/xampp/htdocs/dummy-host.localhost" ##ServerName dummy-host.localhost ##ServerAlias www.dummy-host.localhost ##ErrorLog "logs/dummy-host.localhost-error.log" ##CustomLog "logs/dummy-host.localhost-access.log" combined ##</VirtualHost> ##<VirtualHost *:80> ##ServerAdmin [email protected] ##DocumentRoot "C:/xampp/htdocs/dummy-host2.localhost" ##ServerName dummy-host2.localhost ##ServerAlias www.dummy-host2.localhost ##ErrorLog "logs/dummy-host2.localhost-error.log" ##CustomLog "logs/dummy-host2.localhost-access.log" combined ##</VirtualHost> NameVirtualHost * <VirtualHost *> DocumentRoot "C:\xampp\htdocs" ServerName localhost </VirtualHost> <VirtualHost *> DocumentRoot "C:\xampp\htdocs" ServerName evamagnus.com <Directory "C:\xampp\htdocs\"> Order allow,deny Allow from all </Directory> </VirtualHost> <VirtualHost *> DocumentRoot "C:\xampp\htdocs2\" ServerName mygrafica.com <Directory "C:\xampp\htdocs2\"> Order allow,deny Allow from all </Directory> </VirtualHost> Here is what it says in the control panel: 2:17:37 PM [apache] Starting apache service... 2:17:38 PM [apache] Status change detected: running 2:17:39 PM [apache] Status change detected: stopped Thanks in advance.

    Read the article

  • Windows 2008 R2 CA and auto-enrollment: how to get rid of >100,000 issued certificates?

    - by HopelessN00b
    The basic problem I'm having is that I have 100,000 useless machine certificates cluttering up my CA, and I'd like to delete them, without deleting all certs, or time jumping the server ahead, and invalidating some of the useful certs on there. This came about as a result of accepting a couple defaults with our Enterprise Root CA (2008 R2) and using a GPO to auto-enroll client machines for certificates to allow 802.1x authentication to our corporate wireless network. Turns out that the default Computer (Machine) Certificate Template will happily allow machines to re-enroll instead of directing them to use the certificate they already have. This is creating a number of problems for the guy (me) who was hoping to use the Certificate Authority as more than a log of every time a workstation's been rebooted. (The scroll bar on the side is lying, if you drag it to the bottom, the screen pauses and loads the next few dozen certs.) Does anyone know how to DELETE 100,000 or so time-valid, existing certificates from a Windows Server 2008R2 CA? When I go to delete a certificate now, now, I get an error that it cannot be delete because it's still valid. So, ideally, some way to temporarily bypass that error, as Mark Henderson's provided a way to delete the certificates with a script once that hurdle is cleared. (Revoking them is not an option, as that just moves them to Revoked Certificates, which we need to be able to view, and they can't be deleted from the revoked "folder" either.) Update: I tried the site @MarkHenderson linked, which is promising, and offers much better certificate manageability, buts still doesn't quite get there. The rub in my case seems to be that the certificates are still "time-valid," (not yet expired) so the CA doesn't want to let them be deleted from existence, and this applies to revoked certs as well, so revoking them all and then deleting them won't work either. I've also found this technet blog with my Google-Fu, but unfortunately, they seemed to only have to delete a very large number of certificate requests, not actual certificates. Finally, for now, time jumping the CA forward so the certificates I want to get rid of expire, and therefore can be deleted with the tools at the site Mark linked is not a great option, as would expire a number of valid certificates we use that have to be manually issued. So it's a better option than rebuilding the CA, but not a great one.

    Read the article

  • How to reference a Domain Controller out of the Local Network?

    - by Adrian
    We have multiple servers scattered over different hosting providers. For learning, experimenting and, ultimately, production purposes, I set one of them as a Domain Controller. That went well, most of our services are now authenticating via AD, which helps us a lot. What I want to do now is to simplify the authentication for the multiple servers, by making each of them look at the Domain Controller. This way, our Devs can log into (Remote Desktop) the multiple servers with the same credentials from AD. I know I have to configure each server to look at the Domain Controller. But when I try to add the Domain Controller to the Computer, it cannot find it, although the Domain Controller address is a valid, reachable internet sub-domain (as in "ad.ourcompany.com"). This is the detailed error message: Note: This information is intended for a network administrator. If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt. The following error occurred when DNS was queried for the service location (SRV) resource record used to locate an Active Directory Domain Controller for domain ad.ourcompany.com: The error was: "DNS name does not exist." (error code 0x0000232B RCODE_NAME_ERROR) The query was for the SRV record for _ldap._tcp.dc._msdcs.ad.ourcompany.com Common causes of this error include the following: - The DNS SRV records required to locate a AD DC for the domain are not registered in DNS. These records are registered with a DNS server automatically when a AD DC is added to a domain. They are updated by the AD DC at set intervals. This computer is configured to use DNS servers with the following IP addresses: 109.188.207.9 109.188.207.10 - One or more of the following zones do not include delegation to its child zone: ad.ourcompany.com ourcompany.com com . (the root zone) For information about correcting this problem, click Help. What am I missing? I'm an experienced Dev, but a newbie Sysdamin experimenting with new stuff. Disclaimer All IP addresses and domains/subdomains were changed to preserve security. If by any chance you still can see private information, please let me know so that I can change it.

    Read the article

  • Using Amazon S3 for multiple remote data site uploads, securely

    - by Aitch
    I've been playing about with Amazon S3 a little for the first time and like what I see for various reasons relating to my potential use case. We have multiple (online) remote server boxes harvesting sensor data that is regularly uploaded every hour or so (rsync'ed) to a VPS server. The number of remote server boxes is growing regularly and forecast to keep growing (hundreds). The servers are geographically dispersed. The servers are also automatically built, therefore generic with standard tools and not bespoke per location. The data is many hundreds of files per day. I want to avoid a situation where I need to provision more VPS storage, or additional servers every time we hit the VPS capacity limit, after every N server deployments, whatever N might be. The remote servers can never be considered fully secure due to us not knowing what might happen to them when we are not looking. Our current solution is a bit naive and simply restricts inbound rsync only over ssh to known mac address directories and a known public key. There are plenty of holes to pick in this, I know. Let's say I write or use a script like s3cmd/s3sync to potentially push up the files. Would I need to manage hundreds of access keys and have each server customized to include this (do-able, but key management becomes nightmarish?) Could I restrict inbound connections somehow (eg by mac address), or just allow write-only to any client that was running the script? ( i could deal with a flood of data if someone got into a system? ) having a bucket per remote machine does not seem feasible due to bucket limits? I don't think I want to use a single common key as if one machine is breached then potentially, a malicious hack could get access to the filestore key and start deleting for ll clients, correct? I hope my inexperience has not blinded me to some other solution that might be suggested! I've read lots of examples of people using S3 for backup, but can't really find anything about this sort of data collection, unless my google terminology is wrong... I've written more than I should here, perhaps it can be summarised thus: In a perfect world I just want to have one of our techs install a new remote server into a location and it automagically starts sending files home with little or no intervention, and minimises risk? Pipedream or feasible? TIA, Aitch

    Read the article

  • Debian Lenny syslog kernel messages

    - by andre
    Hello everyone. I've recently got a disk swap on my colo'd box. I've been getting these messages from the kernel (viewed on the terminal and later on /var/log/messages Mar 22 09:04:29 seedbox kernel: [72710.442831] Pid: 6527, comm: sshd Not tainted 2.6.26-2-amd64 #1 Mar 22 09:04:29 seedbox kernel: [72710.442831] RIP: 0010:[<ffffffff802876b9>] [<ffffffff802876b9>] page_remove_rmap+0xff/0x11a Mar 22 09:04:29 seedbox kernel: [72710.442831] RSP: 0018:ffff8100b75d1da8 EFLAGS: 00010246 Mar 22 09:04:29 seedbox kernel: [72710.442831] RAX: 0000000000000000 RBX: ffffe2000185e3e8 RCX: 0000000000008e53 Mar 22 09:04:29 seedbox kernel: [72710.442831] RDX: ffff810080a4c000 RSI: 0000000000000046 RDI: 0000000000000282 Mar 22 09:04:29 seedbox kernel: [72710.442831] RBP: ffff8100379838c8 R08: 00007f6d11ba4000 R09: ffff8100b75d1800 Mar 22 09:04:29 seedbox kernel: [72710.442831] R10: 0000000000000000 R11: 0000010000000010 R12: ffff8100bb446b00 Mar 22 09:04:29 seedbox kernel: [72710.442831] R13: 00007f6d11ba4000 R14: ffffe2000185e3e8 R15: ffff810001023b80 Mar 22 09:04:29 seedbox kernel: [72710.442831] FS: 0000000000000000(0000) GS:ffffffff8053d000(0000) knlGS:0000000000000000 Mar 22 09:04:29 seedbox kernel: [72710.442831] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Mar 22 09:04:29 seedbox kernel: [72710.442831] CR2: 00007f6d1195b480 CR3: 0000000037904000 CR4: 00000000000006e0 Mar 22 09:04:29 seedbox kernel: [72710.442831] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Mar 22 09:04:29 seedbox kernel: [72710.442831] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Mar 22 09:04:29 seedbox kernel: [72710.442831] Process sshd (pid: 6527, threadinfo ffff8100b75d0000, task ffff8100bd0a0990) Mar 22 09:04:29 seedbox kernel: [72710.442831] Stack: 800000006f65b045 800000006f65b045 ffff8100bc013d20 ffffffff8027f69a Mar 22 09:04:29 seedbox kernel: [72710.442831] ffff810100000000 0000000000000000 ffff8100b75d1eb8 ffffffffffffffff Mar 22 09:04:29 seedbox kernel: [72710.442831] 0000000000000000 ffff8100379838c8 ffff8100b75d1ec0 0000000000296460 Mar 22 09:04:29 seedbox kernel: [72710.442831] Call Trace: Mar 22 09:04:29 seedbox kernel: [72710.442831] [<ffffffff8027f69a>] ? unmap_vmas+0x4c9/0x885 Mar 22 09:04:29 seedbox kernel: [72710.442831] [<ffffffff80283ac8>] ? exit_mmap+0x7c/0xf0 Mar 22 09:04:29 seedbox kernel: [72710.442831] [<ffffffff80232538>] ? mmput+0x2c/0xa2 Mar 22 09:04:29 seedbox kernel: [72710.442831] [<ffffffff802378ad>] ? do_exit+0x25a/0x6a6 Mar 22 09:04:29 seedbox kernel: [72710.442831] [<ffffffff802afa45>] ? mntput_no_expire+0x20/0x117 Mar 22 09:04:29 seedbox kernel: [72710.442831] [<ffffffff80237d66>] ? do_group_exit+0x6d/0x9d Mar 22 09:04:29 seedbox kernel: [72710.442831] [<ffffffff80237da8>] ? sys_exit_group+0x12/0x16 Mar 22 09:04:29 seedbox kernel: [72710.442831] [<ffffffff8020beda>] ? system_call_after_swapgs+0x8a/0x8f Mar 22 09:04:29 seedbox kernel: [72710.442831] Mar 22 09:04:29 seedbox kernel: [72710.442831] Mar 22 09:04:29 seedbox kernel: [72710.442831] RSP <ffff8100b75d1da8> Mar 22 09:04:29 seedbox kernel: [72710.442831] ---[ end trace e8a2f3b263482c6e ]--- I don't know what the problem is or how to debug / track it, hope you guys can help.. let me know if you need more information.

    Read the article

  • Linux Mint 14 severe overheating

    - by agvares
    I've tried switching to Mint (it was Mint 12) about 6 months ago, but failed to do it due to enormous overheating which made it virtually impossible to run any applications more complex than Gedit. Time had passed, and now I'm back again with Mint 14, but feeling way more determined. What I face are the following issues: 1) Great overheating (and by great I mean that just by doing nothing my CPU temp is floating around 70-75 C, which I find a lot) 2) Running multiple applications (let's say Chrome, Skype and Pidgin) results in critical overheating and immediate shutdown of the system 3) Due to the stuff listed above, my battery drains in about 10-15 minutes, pretty much turning my laptop into a crippled desktop machine I've got a HP-dv6 laptop (i7, 6gb RAM, dual graphics) Here's the output of lspci: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler XT [AMD Radeon HD 6700M Series] 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0d:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 13:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01) 19:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) what i've tried to do already: 1) I've edited my grub file to add some "splash" arguments there 2) Installed jupiter and powertop 3) Tried to upgrade to newer kernels (up to 3.8), btw running anything newer than 3.5 results in both resolution and wi-fi detection fail 4) Read lots of forum threads devoted to the topic So, my question is simple: What else might I do to become finally able to use Mint as my default OS without the risk of being burned alive by the CPU heat?

    Read the article

  • Issue with Netgear GS108T Managed Switch and Jumbo Frames

    - by Richie086
    I recently purchased a Netgear GS108T managed switch and I am trying to configure jumbo packets between my NAS (Thecus N4100Pro), PC and managed switch. I should mention the fact that I was able to use jumbo frames between my PC and NAS before I purchased the switch without issue. My Desktop has a wired gigabit NIC (Intel 82579V Gigabit) and has the ability to configure jumbo frames (see pic) that are either 9014 bytes or 4088 bytes. I choose 9014 bytes for the jumbo frame size My NAS supports jumbo frames as well, and is configured to use 9014 as the frame size. When I go into my Netgear managed switch and set the frame size to 9014 on the ports I am using for my PC and NAS. See image As soon as I hit apply in the web interface, I loose my connection to the SMB shares on my NAS and I can no longer connect to the web admin interface for my NAS. The really strange thing is I can ping my NAS via the ping command, but when I try to connect to the web interface on port 80 or port 443 the page never loads. I did a scan from my PC to my NAS using nmap and I can see the following ports open PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 111/tcp open rpcbind 139/tcp open netbios-ssn 443/tcp open https 445/tcp open microsoft-ds 631/tcp open ipp 2000/tcp open cisco-sccp 2049/tcp open nfs 3260/tcp open iscsi 49152/tcp open unknown MAC Address: 00:14:FD:15:00:44 (Thecus Technology) Read data files from: C:\Program Files (x86)\Nmap Nmap done: 1 IP address (1 host up) scanned in 211.97 seconds Raw packets sent: 1 (28B) | Rcvd: 1 (28B) Anyone have any idea what is going on here? Why is nmap able to detect the ports are open and listening for http, https and file sharing but I cant connect when all devices have jumbo packets enabled? Stranger still - I did a packet capture using wireshark while the nmap scan was running and filtered so I only saw converstations between my PC and my NAS. Here are the packet details from my scan Only 4 packets over 5k bytes? What is going on here? Do I not need to configure jumbo frame sizes on the switch? I have an internet connection from my pc to the switch to my router - I just cannot connect to my NAS. I just checked on my iPhone and I am able to open my NAS web admin interface without issue on my iPhone! WTF!!!!!! Let me know if you need more details..

    Read the article

  • Cant access a remote server due mistake by setting firewall rule

    - by LMIT
    I need help due a my silly mistake! So for long time i have a dedicate server hosted by register.it Usually i access remotly to this server (Windows 2008 server) by Terminal Server. Today i wanted to block one site that continually send request to my server. So i was adding a new rule in the firewall (the native firewall on windows 2008 server), as i did many time, but this time, probably i was sleeping with my brain i add a general rules that stop everything! So i cant access to the server anymore, as no any users can browse the sites, nothing is working because this rule block everything. I know that is a silly mistake, no need to tell me :) so please what i can do ? The only 1 thing that my provider let me is reboot the server by his control panel, but this not help me in any way because the firewall block me again. i have administrator username and password, so what i really can do ? there are some trick some tecnique, some expert guru that can help me in this very bad situation ? UPDATE i follow the Tony suggest and i did a NMAP to check if some ports are open but look like all closed: NMAP RESULT Starting Nmap 6.00 ( http://nmap.org ) at 2012-05-29 22:32 W. Europe Daylight Time NSE: Loaded 93 scripts for scanning. NSE: Script Pre-scanning. Initiating Parallel DNS resolution of 1 host. at 22:32 Completed Parallel DNS resolution of 1 host. at 22:33, 13.00s elapsed Initiating SYN Stealth Scan at 22:33 Scanning xxx.xxx.xxx.xxx [1000 ports] SYN Stealth Scan Timing: About 29.00% done; ETC: 22:34 (0:01:16 remaining) SYN Stealth Scan Timing: About 58.00% done; ETC: 22:34 (0:00:44 remaining) Completed SYN Stealth Scan at 22:34, 104.39s elapsed (1000 total ports) Initiating Service scan at 22:34 Initiating OS detection (try #1) against xxx.xxx.xxx.xxx Retrying OS detection (try #2) against xxx.xxx.xxx.xxx Initiating Traceroute at 22:34 Completed Traceroute at 22:35, 6.27s elapsed Initiating Parallel DNS resolution of 11 hosts. at 22:35 Completed Parallel DNS resolution of 11 hosts. at 22:35, 13.00s elapsed NSE: Script scanning xxx.xxx.xxx.xxx. Initiating NSE at 22:35 Completed NSE at 22:35, 0.00s elapsed Nmap scan report for xxx.xxx.xxx.xxx Host is up. All 1000 scanned ports on xxx.xxx.xxx.xxx are filtered Too many fingerprints match this host to give specific OS details TRACEROUTE (using proto 1/icmp) HOP RTT ADDRESS 1 ... ... ... 13 ... 30 NSE: Script Post-scanning. Read data files from: D:\Program Files\Nmap OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 145.08 seconds Raw packets sent: 2116 (96.576KB) | Rcvd: 61 (4.082KB) Question: The provider locally can access by username and password ?

    Read the article

  • Is dual-booting an OS more or less secure than running a virtual machine?

    - by Mark
    I run two operating systems on two separate disk partitions on the same physical machine (a modern MacBook Pro). In order to isolate them from each other, I've taken the following steps: Configured /etc/fstab with ro,noauto (read-only, no auto-mount) Fully encrypted each partition with a separate encryption key (committed to memory) Let's assume that a virus infects my first partition unbeknownst to me. I log out of the first partition (which encrypts the volume), and then turn off the machine to clear the RAM. I then un-encrypt and boot into the second partition. Can I be reasonably confident that the virus has not / cannot infect both partitions, or am I playing with fire here? I realize that MBPs don't ship with a TPM, so a boot-loader infection going unnoticed is still a theoretical possibility. However, this risk seems about equal to the risk of the VMWare/VirtualBox Hypervisor being exploited when running a guest OS, especially since the MBP line uses UEFI instead of BIOS. This leads to my question: is the dual-partitioning approach outlined above more or less secure than using a Virtual Machine for isolation of services? Would that change if my computer had a TPM installed? Background: Note that I am of course taking all the usual additional precautions, such as checking for OS software updates daily, not logging in as an Admin user unless absolutely necessary, running real-time antivirus programs on both partitions, running a host-based firewall, monitoring outgoing network connections, etc. My question is really a public check to see if I'm overlooking anything here and try to figure out if my dual-boot scheme actually is more secure than the Virtual Machine route. Most importantly, I'm just looking to learn more about security issues. EDIT #1: As pointed out in the comments, the scenario is a bit on the paranoid side for my particular use-case. But think about people who may be in corporate or government settings and are considering using a Virtual Machine to run services or applications that are considered "high risk". Are they better off using a VM or a dual-boot scenario as I outlined? An answer that effectively weighs any pros/cons to that trade-off is what I'm really looking for in an answer to this post. EDIT #2: This question was partially fueled by debate about whether a Virtual Machine actually protects a host OS at all. Personally, I think it does, but consider this quote from Theo de Raadt on the OpenBSD mailing list: x86 virtualization is about basically placing another nearly full kernel, full of new bugs, on top of a nasty x86 architecture which barely has correct page protection. Then running your operating system on the other side of this brand new pile of shit. You are absolutely deluded, if not stupid, if you think that a worldwide collection of software engineers who can't write operating systems or applications without security holes, can then turn around and suddenly write virtualization layers without security holes. -http://kerneltrap.org/OpenBSD/Virtualization_Security By quoting Theo's argument, I'm not endorsing it. I'm simply pointing out that there are multiple perspectives here, so I'm trying to find out more about the issue.

    Read the article

  • my multi boot can't boot to XP 'resumeobject' is missing

    - by GwenKillerby
    In my multi boot set up, booting to vista and 7 goes fine, but when I try to boot to XP, i get an error Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: 1. Insert your Windows installation disc and restart your computer. 2. Choose your language settings, and then click "Next." 3. Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance. File: \NTLDR Status: 0xc000000e Info: The selected entry could not be loaded because the application is missing or corrupt. See below. Clearly the resumeobject seems to be missing in the XP entry ("Real Mode Boot sector"), only I don't know how to restore it. Vista is on **C:**, Win7 is on **F:** (as is the bootmgr ??? ) and WinXP is on **E:** What I've tried: [1] I've used about 5 windows discs, that is the Recovery Consoles from real XP install CD's and 3 virtual Recovery Consoles. All failed. The real CD's work ONE time, but won't let me finish, I only got as far as [b]fixboot E:[/b] Then they shut the laptop down, I kid you not. On a next startup, all 5 CD's ask me for some Admin password that I've never added! [2] I have VisualBCD and EasyBCD, but the most obvious things I tried there didn't solve the problem. So know I don't exactly know what to do with them. [3] I CAN boot into XP with the FIX NTLDR workaround of http://milescomer.com/tinyempire.com/notes/ntldrismissing.htm, but it doesn't fix it permanently QUESTION: How do I fix it permanently? bcdedit /enum output: Windows Boot Manager -------------------- identifier {bootmgr} device partition=F: path \bootmgr description Windows Boot Manager locale en-US default {current} displayorder {current} {812e27a9-27b7-11e4-8fb4-dfa8174ae8dc} {812e27ac-27b7-11e4-8fb4-dfa8174ae8dc} timeout 30 resume No Windows Boot Loader ------------------- identifier {current} device partition=C: path \Windows\system32\winload.exe description Vista locale nl-NL osdevice partition=C: systemroot \Windows resumeobject {73d8b5bc-2764-11e4-b181-806e6f6e6963} Windows Boot Loader ------------------- identifier {812e27a9-27b7-11e4-8fb4-dfa8174ae8dc} device partition=F: path \Windows\system32\winload.exe description Daisy Etta locale en-US osdevice partition=F: systemroot \Windows resumeobject {b8c234a4-27b0-11e4-b8b3-806e6f6e6963} Real-mode Boot Sector --------------------- identifier {812e27ac-27b7-11e4-8fb4-dfa8174ae8dc} device partition=E: path \NTLDR description XP Thank you.

    Read the article

  • Detecting upload success/failure in a scripted command-line SFTP session?

    - by Will Martin
    I am writing a BASH shell script to upload all the files in a directory to a remote server and then delete them. It'll run every few hours via a CRON job. My complete script is below. The basic problem is that the part that's supposed to figure out whether the file uploaded successfully or not doesn't work. The SFTP command's exit status is always "0" regardless of whether the upload actually succeeded or not. How can I figure out whether a file uploaded correctly or not so that I can know whether to delete it or let it be? #!/bin/bash # First, save the folder path containing the files. FILES=/home/bob/theses/* # Initialize a blank variable to hold messages. MESSAGES="" ERRORS="" # These are for notifications of file totals. COUNT=0 ERRORCOUNT=0 # Loop through the files. for f in $FILES do # Get the base filename BASE=`basename $f` # Build the SFTP command. Note space in folder name. CMD='cd "Destination Folder"\n' CMD="${CMD}put ${f}\nquit\n" # Execute it. echo -e $CMD | sftp -oIdentityFile /home/bob/.ssh/id_rsa [email protected] # On success, make a note, then delete the local copy of the file. if [ $? == "0" ]; then MESSAGES="${MESSAGES}\tNew file: ${BASE}\n" (( COUNT=$COUNT+1 )) # Next line commented out for ease of testing #rm $f fi # On failure, add an error message. if [ $? != "0" ]; then ERRORS="${ERRORS}\tFailed to upload file ${BASE}\n" (( ERRORCOUNT=$ERRORCOUNT+1 )) fi done SUBJECT="New Theses" BODY="There were ${COUNT} files and ${ERRORCOUNT} errors in the latest batch.\n\n" if [ "$MESSAGES" != "" ]; then BODY="${BODY}New files:\n\n${MESSAGES}\n\n" fi if [ "$ERRORS" != "" ]; then BODY="${BODY}Problem files:\n\n${ERRORS}" fi # Send a notification. echo -e $BODY | mail -s $SUBJECT [email protected] Due to some operational considerations that make my head hurt, I cannot use SCP. The remote server is using WinSSHD on windows, and does not have EXEC privileges, so any SCP commands fail with the message "Exec request failed on channel 0". The uploading therefore has to be done via the interactive SFTP command.

    Read the article

  • ZFS/Btrfs/LVM2-like storage with advanced features on Linux?

    - by Easter Sunshine
    I have 3 identical internal 7200 RPM SATA hard disk drives on a Linux machine. I'm looking for a storage set-up that will give me all of this: Different data sets (filesystems or subtrees) can have different RAID levels so I can choose performance, space overhead, and risk trade-offs differently for different data sets while having a few number of physical disks (very important data can be 3xRAID1, important data can be 3xRAID5, unimportant reproducible data can be 3xRAID0). If each data set has an explicit size or size limit, then the ability to grow and shrink the size limit (offline if need be) Avoid out-of-kernel modules R/W or read-only COW snapshots. If it's a block-level snapshots, the filesystem should be synced and quiesced during a snapshot. Ability to add physical disks and then grow/redistribute RAID1, RAID5, and RAID0 volumes to take advantage of the new spindle and make sure no spindle is hotter than the rest (e.g., in NetApp, growing a RAID-DP raid group by a few disks will not balance the I/O across them without an explicit redistribution) Not required but nice-to-haves: Transparent compression, per-file or subtree. Even better if, like NetApps, analyzes the data first for compressibility and only compresses compressible data Deduplication that doesn't have huge performance penalties or require obscene amounts of memory (NetApp does scheduled deduplication on weekends, which is good) Resistance to silent data corruption like ZFS (this is not required because I have never seen ZFS report any data corruption on these specific disks) Storage tiering, either automatic (based on caching rules) or user-defined rules (yes, I have all-identical disks now but this will let me add a read/write SSD cache in the future). If it's user-defined rules, these rules should have the ability to promote to SSD on a file level and not a block level. Space-efficient packing of small files I tried ZFS on Linux but the limitations were: Upgrading is additional work because the package is in an external repository and is tied to specific kernel versions; it is not integrated with the package manager Write IOPS does not scale with number of devices in a raidz vdev. Cannot add disks to raidz vdevs Cannot have select data on RAID0 to reduce overhead and improve performance without additional physical disks or giving ZFS a single partition of the disks ext4 on LVM2 looks like an option except I can't tell whether I can shrink, extend, and redistribute onto new spindles RAID-type logical volumes (of course, I can experiment with LVM on a bunch of files). As far as I can tell, it doesn't have any of the nice-to-haves so I was wondering if there is something better out there. I did look at LVM dangers and caveats but then again, no system is perfect.

    Read the article

  • Why are emails sent from my applications being marked as spam?

    - by Brian
    Hi. I have 2 web apps running on the same server. The first is www.nimikri.com and the other is www.hourjar.com. Both apps share the same IP address (75.127.100.175). My server is through a shared hosting company. I've been testing my apps, and at first all my emails were being delivered to me just fine. Then a few days ago every email from both apps got dumped into my spam box (in gmail and google apps). So far the apps have just been sending emails to me and nobody else, so I know people aren't manually flagging them as spam. I did a reverse DNS lookup for my IP and the results I got were these: 100.127.75.in-addr.arpa NS DNS2.GNAX.NET. 100.127.75.in-addr.arpa NS DNS1.GNAX.NET. Should the reverse DNS lookup point to nimikri.com and hourjar.com, or are they set up fine the way they are? I noticed in the email header these 2 lines: Received: from nimikri.nimikri.com From: Hour Jar <[email protected]> Would the different domain names be causing gmail to think this is spam? Here is the header from one of the emails. Please let me know if any of this looks like a red flag for spam. Thanks. Delivered-To: [email protected] Received: by 10.231.157.85 with SMTP id a21cs54749ibx; Sun, 25 Apr 2010 10:03:14 -0700 (PDT) Received: by 10.151.130.18 with SMTP id h18mr3056714ybn.186.1272214992196; Sun, 25 Apr 2010 10:03:12 -0700 (PDT) Return-Path: <[email protected]> Received: from nimikri.nimikri.com ([75.127.100.175]) by mx.google.com with ESMTP id 28si4358025gxk.44.2010.04.25.10.03.11; Sun, 25 Apr 2010 10:03:11 -0700 (PDT) Received-SPF: neutral (google.com: 75.127.100.175 is neither permitted nor denied by best guess record for domain of [email protected]) client-ip=75.127.100.175; Authentication-Results: mx.google.com; spf=neutral (google.com: 75.127.100.175 is neither permitted nor denied by best guess record for domain of [email protected]) [email protected] Received: from nimikri.nimikri.com (localhost.localdomain [127.0.0.1]) by nimikri.nimikri.com (8.14.3/8.14.3) with ESMTP id o3PH3A7a029986 for <[email protected]>; Sun, 25 Apr 2010 12:03:11 -0500 Date: Sun, 25 Apr 2010 12:03:10 -0500 From: Hour Jar <[email protected]> To: [email protected] Message-ID: <[email protected]> Subject: [email protected] has invited you to New Event MIME-Version: 1.0 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit

    Read the article

  • How is incoming SMTP mail being delivered despite blocked port

    - by Josh
    I setup a MX mail server, everything works despite port 25 being blocked, I'm stumped as to why I am able to receive email with this setup, and what the consequences might be if I leave it this way. Here are the details: Connections to SMTP over port 25 and 587 both reliably connect over my local network. Connections to SMTP over port 25 are blocked from external IPs (the ISP is blocking the port). Connections to Submission SMTP over port 587 from external IPs are reliable. Emails sent from gmail, yahoo, and a few other addresses all are being delivered. I haven't found an email provider that fails to deliver mail to my MX. So, with port 25 blocked, I am assuming other MTA servers fallback to port 587, otherwise I can't imagine how the mail is received. I know port 25 shouldn't be blocked, but so far it works. Are there mail servers that this will not work with? Where can I find more about how this is working? -- edit More technical detail, to validate that I'm not missing something silly. Obviously in the transcript below I've replaced my actual domain with example.com. # DNS MX record points to the A record. $ dig example.com MX +short 1 example.com $ dig example.com A +short <Public IP address> # From a public server (not my ISP hosting the mail server) # We see port 25 is blocked, but port 587 is open $ telnet example.com 25 Trying <public ip>... telnet: Unable to connect to remote host: Connection refused # Let's try openssl $ openssl s_client -starttls smtp -crlf -connect example.com:25 connect: Connection refused connect:errno=111 # Again from a public server, we see port 587 is open $ telnet example.com 587 Trying <public ip>... Connected to example.com. Escape character is '^]'. 220 example.com ESMTP Postfix ehlo example.com 250-example.com 250-PIPELINING 250-SIZE 10485760 250-VRFY 250-ETRN 250-STARTTLS 250-ENHANCEDSTATUSCODES 250-8BITMIME 250-DSN 250-BINARYMIME 250 CHUNKING quit 221 2.0.0 Bye Connection closed by foreign host. Here is a portion from the mail log when receiving a message from gmail: postfix/postscreen[93152]: CONNECT from [209.85.128.49]:48953 to [192.168.0.10]:25 postfix/postscreen[93152]: PASS NEW [209.85.128.49]:48953 postfix/smtpd[93160]: connect from mail-qe0-f49.google.com[209.85.128.49] postfix/smtpd[93160]: 7A8C31C1AA99: client=mail-qe0-f49.google.com[209.85.128.49] The log shows that a connection was made to the local IP on port 25 (I'm not doing any port mapping, so it is port 25 on the public IP too). Seeing this leads me to hypothesize that the ISP block on port 25 only occurs when a connection is made from an IP address that is not known to be a mail server. Any other theories?

    Read the article

  • Apache2 - mod_expire and mod_rewrite not working in httpd.conf - serving content from tomcat

    - by Ankit Agrawal
    I am using apache2 server running on debian which forwards all the http request to tomcat installed on same machine. I have two files under my /etc/apache2/ folder apache2.conf and httpd.conf I modified httpd.conf file to look like following. # forward all http request on port 80 to tomcat ProxyPass / ajp://127.0.0.1:8009/ ProxyPassReverse / ajp://127.0.0.1:8009/ # gzip text content AddOutputFilterByType DEFLATE text/plain AddOutputFilterByType DEFLATE text/html AddOutputFilterByType DEFLATE text/xml AddOutputFilterByType DEFLATE text/css AddOutputFilterByType DEFLATE text/javascript AddOutputFilterByType DEFLATE application/xml AddOutputFilterByType DEFLATE application/xhtml+xml AddOutputFilterByType DEFLATE application/rss+xml AddOutputFilterByType DEFLATE application/javascript AddOutputFilterByType DEFLATE application/x-javascript DeflateCompressionLevel 9 BrowserMatch ^Mozilla/4 gzip-only-text/html BrowserMatch ^Mozilla/4\.0[678] no-gzip BrowserMatch \bMSIE !no-gzip !gzip-only-text/html # Turn on Expires and mark all static content to expire in a week # unset last modified and ETag ExpiresActive On ExpiresDefault A0 <FilesMatch "\.(jpg|jpeg|png|gif|js|css|ico)$" ExpiresDefault A604800 Header unset Last-Modified Header unset ETag FileETag None Header append Cache-Control "max-age=604800, public" </FilesMatch RewriteEngine On # rewrite all www.example.com/content/XXX-01.js and YYY-01.css files to XXX.js and YYY.css RewriteRule ^content/(js|css)/([a-z]+)-([0-9]+)\.(js|css)$ /content/$1/$2.$4 # remove all query parameters from URL after we are done with it RewriteCond %{THE_REQUEST} ^GET\ /.*\;.*\ HTTP/ RewriteCond %{QUERY_STRING} !^$ RewriteRule .* http://example.com%{REQUEST_URI}? [R=301,L] # rewrite all www.example.com to example.com RewriteCond %{HTTP_HOST} ^www\.example\.com$ [NC] RewriteRule ^(.*)$ http://example.com/$1 [R=301,L] I want to achieve following. forward all traffic to tomcat GZIP all the text content. Put 1 week expiry header to all static files and unset ETag/last modified header. rewrite all js and css file to certain format. remove all the query parameters from URL forward all www.example.com to example.com The problem is only 1 and 2 are working. I tried a lot with many combinations but the expire and rewrite rule (3-6) do not work at all. I also tried moving these rules to apache2.conf and .htaccess files but it didn't work either. It does not give any error but these rules are simple ignored. expires and rewrite modules are ENABLED. Please let me know what should I do to fix this. 1. Do I need to add something else in httpd.conf file (like Options +FollowSymLink) or something else? 2. Do I need to add something in apache2.conf file? 3. Do I need to move these rules to .htaccess file? If yes, what should I write in that file and where should I keep that file? in /etc/apache2/ folder or /var/www/ folder? 4. Any other info to make this work? Thanks, Ankit

    Read the article

  • What are some of the best wireless routers for a price-conscious home power-user?

    - by Alain
    I'm extremely dissatisfied with the 'popular' choice for routers in homes and small offices. They are expensive (upwards of 60$), lack a great deal of useful configuration options, and seem to need to be restarted quite often. (Linksys comes to mind). I've been on the market for a good router lately, and slowly collecting a set of requirements I feel good routers should meet. Maximum number of TCP/IP connections. - This isn't something I see any routers advertise, but in terms of supporting torrent applications, I've been screwed by routers that support less than 20 here. From what I understand a fairly standard number is 200, but there are not so expensive routers that support thousands. Router configuration menu - Most have standard menu's that let you set up basic things like your wireless network encryption settings, uPnP, and maybe even DMZ (demilitarized zones). An absolute requirement for me, however, are routers with good enough firmware to support: Explicit Port forwarding Assigning static local ips to specific mac addresses, or at least Port forwarding by MAC address Port, IP and MAC filtering Dynamic DNS service for home users who want to set up a server but have a dynamic IP Traffic shaping (ideally) - giving priority to packets from certain machines or over certain ports. Strong wireless signal - If getting a reliable signal requires me to be so close to the router that I can connect an Ethernet cable, it's not good enough. As many Ethernet ports as possible. - Because I want to be able to switch from console gaming to PC gaming without visiting my router. So far, the best thing I've stumbled upon (in the bargain bin at staples) was a 20$ retail plus router. It was meant to be the cheapest alternative until I could find something better to purchase online, but I was actually blown away by the firmware capabilities. It supports defining reserved bandwidth for certain network traffic, dynamic DNS, reserving local IPs for specific MAC addresses, etc. At 2 am when my roommate is killing our Internet with their torrents, I can limit their bandwidth without outright blacklisting them. I have, however, met serious limitations when it comes to network traffic between local machines. It claims a 300Mbps connection, but I have trouble streaming videos from my PC to my console or other laptops wirelessly. It has a meltdown and needs to be reset once in a while (no more than a couple times a month), and it's got a 200 connection limit. There 4 Ethernet ports in the back but I'm pretty sure the first doesn't work. So some great answers to this question would be: Any metrics you use to compare routers, and requirements you have for new candidates. The best routers you've found for supporting home servers, file management systems, high volume torrent traffic, good price/feature ratio, etc. Good configuration advice (aside from 'use Ethernet whenever possible') Thanks for your feedback and experiences!

    Read the article

  • Apache2 return 404 for proxy requests before reaching WSGI

    - by Alejandro Mezcua
    I have a Django app running under Apache2 and mod_wsgi and, unfortunately, lots of requests trying to use the server as a proxy. The server is responding OK with 404 errors but the errors are generated by the Django (WSGI) app, which causes a high CPU usage. If I turn off the app and let Apache handle the response directly (send a 404), the CPU usage drops to almost 0 (mod_proxy is not enabled). Is there a way to configure Apache to respond directly to this kind of requests with an error before the request hits the WSGI app? I have seen that maybe mod_security would be an option, but I'd like to know if I can do it without it. EDIT. I'll explain it a bit more. In the logs I have lots of connections trying to use the server as a web proxy (e.g. connections like GET http://zzz.zzz/ HTTP/1.1 where zzz.zzz is an external domain, not mine). This requests are passed on to mod_wsgi which then return a 404 (as per my Django app). If I disable the app, as mod_proxy is disabled, Apache returns the error directly. What I'd finally like to do is prevent Apache from passing the request to the WSGI for invalid domains, that is, if the request is a proxy request, directly return the error and not execute the WSGI app. EDIT2. Here is the apache2 config, using VirtualHosts files in sites-enabled (i have removed email addresses and changed IPs to xxx, change the server alias to sample.sample.xxx). What I'd like is for Apache to reject any request that doesn't go to sample.sample.xxx with and error, that is, accept only relative requests to the server or fully qualified only to the actual ServerAlias. default: <VirtualHost *:80> ServerAdmin [email protected] ServerName X.X.X.X ServerAlias X.X.X.X DocumentRoot /var/www/default <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options FollowSymLinks AllowOverride None Order allow,deny allow from all </Directory> ErrorDocument 404 "404" ErrorDocument 403 "403" ErrorDocument 500 "500" ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> actual host: <VirtualHost *:80> ErrorDocument 404 "404" ErrorDocument 403 "403" ErrorDocument 500 "500" WSGIScriptAlias / /var/www/sample.sample.xxx/django.wsgi ServerAdmin [email protected] ServerAlias sample.sample.xxx ServerName sample.sample.xxx CustomLog /var/www/sample.sample.xxx/log/sample.sample.xxx-access.log combined Alias /robots.txt /var/www/sample.sample.xxx/static/robots.txt Alias /favicon.ico /var/www/sample.sample.xxx/static/favicon.ico AliasMatch ^/([^/]*\.css) /var/www/sample.sample.xxx/static/$1 Alias /static/ /var/www/sample.sample.xxx/static/ Alias /media/ /var/www/sample.sample.xxx/media/ <Directory /var/www/sample.sample.xxx/static/> Order deny,allow Allow from all </Directory> <Directory /var/www/sample.sample.xxx/media/> Order deny,allow Allow from all </Directory> </VirtualHost>

    Read the article

  • Nagios3: Conditional operators for service checks?

    - by Dave
    I'm trying to setup Nagios to monitor my various using hostgroups to define 'machine roles', against which I run services to check the machines by role. However, I'd like to use conditional operators that would enable me to run the service check against an intersection of two host groups, rather than their unions... i.e. using &&, ||, or () operators. For example, imagine I have the following servers: www-eu: Linux WWW (Apache) server, in the EU www-us: Windows WWW (IIS) server, in the US (West coast) ftp-eu: Linux FTP server, in the EU ftp-us: Windows FTP server, in the US I would want to create the following host groups: US-Servers: www-us, ftp-us EU-Servers: www-eu, ftp-eu WWW-Servers: www-us, www-eu FTP-Servers: ftp-us, ftp-eu Now say I'm interested in checking the HTTP response time for my web servers. Then let's say this particular Nagios service is running from the US (West Coast), and that I have a command called *check_http_response_time*. This command will check the responsiveness of the HTTP server, which I can provide an argument which defines the max response time before raising critical. My command might look like: check_http_response_time $HOSTNAME$ 50 Now traditionally, I can run my checks by specifying a list of host or hostgroups. define service{ use local-service hostgroup_name WWW-Servers # Servers = www-us, www-eu servicegroups WWW Checks service_description Check HTTP Response Time check_command check_http_response_time!50 } However, with the above service definition, given my Nagios service is in US West, I could reasonably expect that my EU server will return critical. Really, I want different thresholds for each region (50 for US West, 200 for EU.) I would have to permutate my service for each host and set their custom threshold, or alternatively permutate out my service groups by role & region (i.e. WWW-Servers-EU), and run my specific thresholds against those. Though the latter is better, both are much messier than I'd like... What I would love, and what this post is asking for, is a way to use hostgroups to perform an intersection using conditional logic, rather than a simple union. It might look like: define service{ use local-service hostgroup_name WWW-Servers && US-Servers servicegroups WWW Checks service_description Check HTTP Response Time check_command check_http_response_time!50 } It then would run the check only against servers that are in both WWW-Servers and US-Servers, in my example, just www-us. The benefits of such a feature would be significant for Nagios services configured for large-scale. Is this feature available? If it isn't, will it be available in the future? Is there an alternative way to accomplish this given the most recent Nagios version? Any tips/suggestions are most appreciated! Dave

    Read the article

  • Block IP Address including ICMP using UFW

    - by dr jimbob
    I prefer ufw to iptables for configuring my software firewall. After reading about this vulnerability also on askubuntu, I decided to block the fixed IP of the control server: 212.7.208.65. I don't think I'm vulnerable to this particular worm (and understand the IP could easily change), but wanted to answer this particular comment about how you would configure a firewall to block it. I planned on using: # sudo ufw deny to 212.7.208.65 # sudo ufw deny from 212.7.208.65 However as a test that the rules were working, I tried pinging after I setup the rules and saw that my default ufw settings let ICMP through even from an IP address set to REJECT or DENY. # ping 212.7.208.65 PING 212.7.208.65 (212.7.208.65) 56(84) bytes of data. 64 bytes from 212.7.208.65: icmp_seq=1 ttl=52 time=79.6 ms ^C --- 212.7.208.65 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 79.630/79.630/79.630/0.000 ms Now, I'm worried that my ICMP settings are too generous (conceivably this or a future worm could setup an ICMP tunnel to bypass my firewall rules). I believe this is the relevant part of my iptables rules is given below (and even though grep doesn't show it; the rules are associated with the chains shown): # sudo iptables -L -n | grep -E '(INPUT|user-input|before-input|icmp |212.7.208.65)' Chain INPUT (policy DROP) ufw-before-input all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-before-input (1 references) ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 4 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 12 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 ufw-user-input all -- 0.0.0.0/0 0.0.0.0/0 Chain ufw-user-input (1 references) DROP all -- 0.0.0.0/0 212.7.208.65 DROP all -- 212.7.208.65 0.0.0.0/0 How should I go about making it so ufw blocks ICMP when I specifically attempt to block an IP address? My /etc/ufw/before.rules has in part: # ok icmp codes -A ufw-before-input -p icmp --icmp-type destination-unreachable -j ACCEPT -A ufw-before-input -p icmp --icmp-type source-quench -j ACCEPT -A ufw-before-input -p icmp --icmp-type time-exceeded -j ACCEPT -A ufw-before-input -p icmp --icmp-type parameter-problem -j ACCEPT -A ufw-before-input -p icmp --icmp-type echo-request -j ACCEPT I'm tried changing ACCEPT above to ufw-user-input: # ok icmp codes -A ufw-before-input -p icmp --icmp-type destination-unreachable -j ufw-user-input -A ufw-before-input -p icmp --icmp-type source-quench -j ufw-user-input -A ufw-before-input -p icmp --icmp-type time-exceeded -j ufw-user-input -A ufw-before-input -p icmp --icmp-type parameter-problem -j ufw-user-input -A ufw-before-input -p icmp --icmp-type echo-request -j ufw-user-input But ufw wouldn't restart after that. I'm not sure why (still troubleshooting) and also not sure if this is sensible? Will there be any negative effects (besides forcing the software firewall to force ICMP through a few more rules)?

    Read the article

  • Troubleshooting an unstable internet connection

    - by Konrad Rudolph
    My MacBook Pro running OS X (10.9, but I had the same problem before) is connected to a Belkin router via WiFi and, using Virgin Media as the ISP, to the internet. The connection is extremely unstable – on some days, I get a ping timeout every few seconds. In addition, some domains seem to suffer general connectivity issues. For instance, I often find that while the youtube.com website loads, none of the videos (which are hosted on a separate domain) do. At other times, videos load but always fail to buffer, even though the actual connection speed is ok, even though I’ve disabled dash playback. Since I’m living in a rented room and the ISP contract isn’t actually mine I’ve got only limited possibilities of addressing the problem. In particular, I have no access to the router configuration and my non tech savvy landlady, while sympathetic, is not in a great hurry to hand the problem over to the ISP’s customer support. What’s more, I seem to be the only person in the house experiencing these problems – but I can imagine that this is simply because I’m the only one who’s using the internet continuously. I’m searching for specific tests that might be able to pinpoint – and ideally solve – the problem. So far all I’ve managed to do is establish that Virgin is routing my traffic in mysterious ways. Here’s an excerpt from traceroute google.co.uk. It’s worth mentioning that the host name doesn’t seem to matter a lot, the trace route is always the same. traceroute: Warning: google.co.uk has multiple addresses; using 62.254.36.148 traceroute to google.co.uk (62.254.36.148), 64 hops max, 52 byte packets 1 (192.168.2.1) 1.112 ms 1.300 ms 2.359 ms 2 10.100.32.1 (10.100.32.1) 11.926 ms 10.217 ms 24.987 ms 3 cmbg-core-1a-ae3-610.network.virginmedia.net (80.1.202.93) 28.809 ms * 66.653 ms 4 popl-bb-1b-ae16-0.network.virginmedia.net (212.43.163.141) 13.759 ms 126.504 ms 20.472 ms 5 nrth-bb-1b-et-010-0.network.virginmedia.net (62.253.175.57) 28.357 ms 16.398 ms 42.387 ms 6 nrth-bb-1c-ae1-0.network.virginmedia.net (62.253.174.110) 27.441 ms 15.622 ms 12.044 ms 7 lutn-icdn-1-ae0-0.network.virginmedia.net (62.253.175.82) 16.678 ms 28.463 ms 28.253 ms 8 * * * 9 * * * 10 * * * ^C If I let it, this goes on until the end of time. It never seems to reach a destination. Is this normal? A friend living in the same town who is also with Virgin Media has a more conventional traceroute output: 7 hops to google.co.uk, all of which send the ICMP TIME_EXCEEDED response. The obvious fix – rebooting the router – doesn’t seem to help. As far as I can tell, the WiFi connection is stable (I can always ping the router) so the problem is further downstream. I’ve tried using an alternative DNS before (OpenDNS) but if anything, this made things worse. In fact, it made all Google services nigh unreachable.

    Read the article

  • Encrypted off-site data storage

    - by Dan
    My business has a rather unique problem. We work in China and we want to implement a file server paradigm which does not store any files locally, but rather in a server overseas. Applications would be saved onto our local machines, but data would be loaded directly into memory from the cloud, e.g. I load a docx into word at the beginning of the day, saving periodically to the cloud as I work on it, and turn off my computer at night, with nothing saved locally. Considering recent events, we worry about being raided by the Chinese authorities, and although all our data is encrypted, it would not be hard for the authorities to force us to give up the keys. So the goal is not to have anything compromising physically in China. We have about 20 computers, and we need an authenticated, encrypted connection with this overseas file server. A system with Active-Directory-like permissions would be best, so that only management can read or write to certain files, or workers can only access files that relate to their projects, and to which all access can be cut off should the need arise. The file server itself would also need to be encrypted. And for convenience, it would be nice if this system was integrated with each computer's file explorer (like skydrive or dropbox does, but, again, without saving a copy locally), rather than through a browser. I can't find any solution online. Does anyone know of a service that does this? Otherwise I'll have to do it myself (which kinda sounds fun, but I don't really have the time), and I'm not sure where to start. Amazon maybe. But the protocols that offices would use on their intranet typically aren't encrypted; we need all traffic securely tunneled out of the country. Each computer already has a VPN to a server in California, but I'm unsure whether it would be efficient to pipe file transfers through it. Let me know if anyone has any ideas. And this is my first post; feel free say whether this question is inappropriate/needs to be posted elsewhere.

    Read the article

  • Transferring a Windows 8 license and proper un- and reinstallation

    - by Kiwi
    Long story short I have two computers: a laptop and a desktop computer. Both have Windows 7 on them. I buy the Windows 8 Pro upgrade. To see if it screws up anything, I install it on my laptop as a guinea pig. I intend to use Windows 8 for my main computer, my desktop, but I want to test it on the laptop, so I know I don’t risk losing access to my desktop and the data on it. I never use my laptop, and only used it, because it already has a Windows 7 installation on it. The problem At some point, I must have entered the license key on my laptop, because when I go to the activation screen on my desktop, I get this: Uh-oh. I can’t use the key on my desktop. Now how the hell do I transfer the key from my laptop to my desktop computer? Answers and suggestions so far Let’s just say that I tried everything possible to get some answers on this matter. The best response I got from Microsoft is this: To install Windows 8 on your desktop, do the following: Uninstall Windows 8 on your laptop Afterwards, install Windows 8 on your desktop If it won’t activate, call product activation at (...) I am not a fan of that last point. The error message does allude to such a solution, however: If you’ve reinstalled Windows or made changes to your hardware recently, you may be able to use your current key. The question My main question is this: has anyone been in a similar situation, and if so, what did you do to resolve this? Failing that, what is the proper way to uninstall the Windows 8 installation on my laptop, and reinstall the Windows 8 installation on my desktop? Ad 1 I have already tried using the “reset” feature on my laptop, but that only resulted in a new Windows 8 installation that was already activated. But which is the right way to uninstall the installation in a way that allows me to use the license key on the desktop computer? Ad 2 Which is the proper way to reinstall the Windows 8 installation on my desktop computer? Why do I even have to reinstall it in the first place? I won’t get around to do this, until my USB key with 3.0 support arrives in the mail, but it is going to be a while, until I find a assuaging response to the best way to go about this anyway.

    Read the article

  • Restart mysql keeping the data

    - by sitonico
    I'm quite new using mysql, so let me know if I'm missing something. I took some holidays, and when I got back to work and I tried to log in phpmyadmin I got a ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2). I never had this problem, so I was browsing to look for a solution. I tried some things, and I'm afraid I touched too much. I couldn't solve the problem, and the I realized that I had some actualizations to be done, and I thought that they may be helpful for mysql. Then I also realized that when I was doing this actualizations first day, they stopped because I had a lack of space, so I restarted then. Then,when the system was configuring mysql, it didn't advance. I waited for a long time and then I just stopped it and restarted the computer. After it, I just tried to uninstall mysql with sudo apt-get remove mysql-server-5.1, and install it again, but it didn't work. Now I have 2 questions: What do you think it is happening? Should I remove mysql completely? What should I do? I'm afraid of losing my databases, is there anyway to recover the data? Thank you very much in advance. -----------EDIT------- These are the messages: alfonso@alfonso-laptop:/$ tail -F /var/log/syslog | grep Feb 15 15:08:01 alfonso-laptop init: mysql post-start process (15192) terminated with status Feb 15 15:08:01 alfonso-laptop init: mysql main process (15263) terminated with status Feb 15 15:08:01 alfonso-laptop init: mysql main process ended, Feb 15 15:08:31 alfonso-laptop init: mysql post-start process (15264) terminated with status Feb 15 15:08:31 alfonso-laptop init: mysql main process (15358) terminated with status Feb 15 15:08:31 alfonso-laptop init: mysql main process ended, Feb 15 15:09:01 alfonso-laptop init: mysql post-start process (15359) terminated with status Feb 15 15:09:01 alfonso-laptop init: mysql main process (15447) terminated with status Feb 15 15:09:01 alfonso-laptop init: mysql main process ended, Feb 15 15:09:32 alfonso-laptop init: mysql post-start process (15448) terminated with status 1 This is the content of error.log-old 110128 13:17:20 [Note] /usr/sbin/mysqld: Normal shutdown 110128 13:17:20 [Note] Event Scheduler: Purging the queue. 0 events 110128 13:17:20 InnoDB: Starting shutdown... 110128 13:17:22 InnoDB: Shutdown completed; log sequence number 0 590872 110128 13:17:22 [Note] /usr/sbin/mysqld: Shutdown complete 110214 2:08:18 [Note] Plugin 'FEDERATED' is disabled. 110214 2:08:19 InnoDB: Started; log sequence number 0 590872 110214 2:08:19 [Note] Event Scheduler: Loaded 0 events 110214 2:08:19 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.41-3ubuntu12.8' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) -- Some links of similar problems https://bugs.launchpad.net/ubuntu/+source/mysql-dfsg-5.1/+bug/573318 http://www.linuxquestions.org/questions/linux-newbie-8/lamp-install-on-lucid-mysqld-sock-missing-mysql-terminating-status%3D1-853152/ It seems it's a permissions problem... But I don't know which permissions I should change... SOLVED -- mysql error 2002 "cannot connect to socket"

    Read the article

  • What is some good lossless video codec for recording gameplay?

    - by Don Salva
    I'm an avid gamer and I like to record my gameplay. Usually I've been using Fraps to do it, however I'm thinking of switching to Dxtory as it allows to write on multiple HDDs at once. Say I have 3 HDDs with the following write speeds: HDD1 with 50 mb/s, HDD2 with 22 mb/s and HDD3 with 45 mb/s. Combined write speed would be: 117 mb/s. Dxtory allows you to utilize all 3 HDD's at once while recording your gameplay. Using this formula: RGB24 YUV24: Width x Height x 3 x fps = bitrate (byte/sec) YUV420: Width x Height x 3 / 2 x fps = bitrate (byte/sec) YUV410: Width x Height x 9 / 8 x fps = bitrate (byte/sec) And recording in YUV420 colorspace at 1920x1080 with 30 fps I'd need about 95 mb/s write speed. Dxtory is good because it allows me to play with constant 60 fps while recording in 30 fps. Fraps does not (even though they say it does), once you start recording with Fraps, the game's fps drops. So I'm looking for a codec that doesn't need a very high write speed (bitrate) yet records in good (lossless) quality. Dxtory comes with its own codec, the Dxtory codec. Which allows me some experimentation. Fraps has it's own codec which I can use in Dxtory to expirement around. I also came across http://lags.leetcode.net/codec.html . Are there more lossless codecs out there (besides Fraps' and Dxtory's) which are good for what I want to do? Edit: To clarify, yes, I'm aware a lossless codec always has "good" quality. But that's not what I'm looking for. Let me take the Fraps codec and Dxtory codec to clarify what I'm looking for. When I record with the Dxtory codec in RGB colorspace at 1920x1080 with targeted 30 fps, I can play the game at 60 fps, BUT I'm recording with 10-15 fps, that's because RGB with Dxtory needs much, much more write speed than my hdd can handle. When recording with Dxtory codec in YUV410 colorspace at 1920x1080 with targeted 30 fps, I can play at 60 fps and record at 30 fps, again, that's because YUV410 in Dxtory's codec takes much, much less write speed than RGB When recording with Fraps codec in ??? (I dunno the color space Fraps records in, I guess YUV420), I can play with 60 fps and record with 30 fps. What I'm looking for is a lossless codec that can record in YUV420 (or even RGB??) which does not exceed a write speed (or bitrate if you will) of 100 mb/s in 1920x1080 or in other words, which will allow me to record in constant 30fps. Obviously the best solution would be to buy an SDD, but that's not what I'm after.

    Read the article

< Previous Page | 632 633 634 635 636 637 638 639 640 641 642 643  | Next Page >