Search Results

Search found 21331 results on 854 pages for 'require once'.

Page 636/854 | < Previous Page | 632 633 634 635 636 637 638 639 640 641 642 643  | Next Page >

  • I receive email not addressed to me - virus?

    - by Anne
    Every once in a while I receive email (on Gmail) that isn't addressed to me. Gmail puts it in the spam box, because it 'can't verify that it has been sent by [sender]'. The emails, when opened, contain confidential information about deliveries and paid bills (it does look an awful lot like 'real' mail from well-known companies, and it doesn't look like a scam, since the mail is informative - they give information instead of asking for credit card numbers ;-)), and I even got an email from "Facebook" that I requested a password change and that I have to 'click here' to change the password for [email address that isn't mine]. I am not the only addressee, there seems to be a whole list of Gmail addresses beginning with 'a'. The original addressee obviously has some sort of virus, and now I wonder if this could be a risk for me too. Is my email being sent around without my knowing too? I am not the kind of person who randomly clicks on shady links - I am very careful on the internet - but maybe there are other ways of catching viruses? Is there something I should do/check? Thank you for your help!

    Read the article

  • Seagate 3TB ST3000DM001 hard drive not recognized by Linux, causes fdisk to hang

    - by MountainX
    I'm running Kubuntu 12.04. I have a brand new, never used Seagate 3TB ST3000DM001 hard drive. It's an internal drive. I installed it in a USB enclosure. When I connect it to my PC, nothing happens automatically. When I run sudo fdisk -l, fdisk hangs (without reporting this drive) until I disconnect this drive from the USB port. blkid won't report it either. I tried connecting it to both USB 2.0 and USB 3.0 ports on my PC. I got the same result either way. I tried two different USB enclosures with the same result. If I take the same drive, same enclosure and connect it to a Windows 7 laptop, it is recognized automatically as a USB mass storage device. I want to format the drive (probably ext4) and copy files to it. I have another drive, also in a USB enclosure, that is connected via USB 3.0 to this PC and it works fine. It's a 2.0 TB Samsung HDD. I plan to copy files from the 2TB to the 3TB drive, once I get this issue resolved. My motherboard is an Asus Asus P8B WS LGA1155/ Intel C206/ Quad CrossFireX/ SATA3&USB3.0/ A&2GbE/ ATX. What is the resolution?

    Read the article

  • pfSense router on a LAN with two gateways

    - by JohnCC
    I have a LAN with an ADSL modem/router on it. We have just gained an alternative high-speed internet connection at our location, and I want to connect the LAN to it, eventually dropping the ADSL. I've chosen to use a small PFSense box to connect the LAN to the new WAN connection. Two servers on the LAN run services accessible to the outside via NAT using the single ADSL WAN IP. We have DNS records which point to this IP. I want to do the same via the new connection, using the WAN IP there. That connection permits multiple IPs, so I have configured pfSense using virtual IP's, 1:1 NAT and appropriate firewall rules. When I change the servers' default gateway settings to the pfSense box, I can access the services via the new WAN IPs without a problem. However, I can no longer access them via the old WAN IP. If I set the servers' default gateway back to the ADSL router, then the opposite is true - I can access the services via the ADSL IP, but not via the new one. In the first case, I believe this is because an incoming SYN packet arrives at the ADSL WAN IP, and is NAT'd and sent to the internal IP of the server. The server responds with a SYN/ACK which it sends via its default gateway, the pfSense box. The pfSense box sees a SYN/ACK that it saw no SYN for and drops the packet. Is there any sensible way around this? I would like the services to be accessible via both IPs for a short period at least, since once I change the DNS it will take a while before everyone picks up the new address.

    Read the article

  • Ubuntu NBR karmic boot freezes at fsck from util-linux-ng 2.16

    - by Bluebill
    I have a netbook (emachine e250 - equivalent to an acer aspire one) and I have Ubunutu NBR 9.10 installed on it. Every other cold boot freezes at the following error message: fsck from util-linux-ng 2.16 There is no disk activity, no activity what so ever. I have left the machine sit for over an hour and nothing. It takes a couple of hard resets to be able to boot properly. Once it boots everything works great (wireless, suspend/resume, etc.)! I have spent the last couple of weeks researching the problem and the only thing that seems to work is setting nolapic in the boot string in grub - it boots every time. Unfortunately, nolapic disables the second core and causes problems with suspend resume. At first I thought it was an fsck problem with the first partition on the hard disk as it is a hidden ntfs partition containing the windows xp recover information. So in /etc/fstab I set the partition so that it would be ignored by fsck. This didn't seem to do anything. I have these partitions: /dev/sda1 - an ntfs recovery partition /dev/sda2 - /boot /dev/sda3 - swap /dev/sda5 - / /dev/sda6 - /home I am running kernel version 2.6.31-19-generic and have all the patches (as indicated by update manager). I also have no splash screen so I can see the boot progress. I have only been using NBR since January, I have been using Ubuntu on my desktop since last June (2009-06). What logs should I be looking at? Is there a log for failed boots?

    Read the article

  • Dell XPS 15 L502X hard drive Partition

    - by Mohan Gajula
    I have a situation here. I got my new Dell XPS 15 Laptop. The configuration of hard drive is as below : Volume 1: (OEM Partition): 133MB Volume 2: OS (C:): 685.25 GB Volume 3: Recovery : 13.25 GB Now, I am trying to re-partition my C Drive to have a C: drive with 100 GB and a new drive with 585 GB. Earlier, I tried using the Windows 7 Disk Management to shrink and extend the volume. That lead to the OS and hard drive not working. Dell Tech support tried to fix the issue, but they were not able to fix the issue online. Later a Dell Technician arrived my place, and replaced the hard drive with a new hard drive. Please help me re-partition the C: Drive with 100 GB, and new D drive with 585 GB. I don't want to lose my Recovery Partition. SOLUTION As Suggested by KCotreau below , I have done exactly. I have resized the C drive to 100 GB. And then applied the changes. Windows got restarted. On the boot screen, the partition was taking place. It took around 30 mins ( approx. ). Once after restart, I can see my C drive is 100 GB. Now opened the Easeus again. And created a new partition for the free space ( 585 GB ) this took 10 seconds to create. Here goes the screenshot after partitioning. Thanks to KCotreau. You are amazing.

    Read the article

  • Can I still restore partition table?

    - by Johannes Lund
    Once I was going to resize partitions on my Mac HD from Bootcamp. I changed my mind and was going to quit, but apparently I hit a button, which made every single mac partion dissapear, and windows 7 refused to restart and be reinstalled. The 1 TB large HD consists of 3 partions, I believe. Since I can't see their actual size (except bootcamp), this is how I recall it. Macintosh HD about 500GB (Somewhere around 700GB according to disk utillity, but 500 according to Finder, and 500GB was all I could access.) Lion Recovery disk Bootcamp 293.36 GB To fix this I connected my mac via target disk mode to a pc and ran TestDisk. However this is the results: Since I Don't have 10 reputation I cant post the image showing the testdisk results, so I post a link instead hoping it is ok. The two mac partitions' sizes are completely wrong, and BOOTCAMP isn't showing. I tested using disk utilities from the snow leopard dvd. There there is one 293.36 GB Mac OS Extended partition. Before I had the firewire cable for target disk mode I tried reinstalling windows. Without success I tried again formating BOOTCAMP. Was that a bad thing to do? Could it have overwritten data from Macintosh HD? Unfortunately I have no backup. I could bring it to some kind of computer repair firm though.

    Read the article

  • Failing Windows Updates with Error Code 800719e4

    - by Kev
    On a number of Vista machines I have now come across the same error - when installing updates everything works fine, until it after it reboots and the rolls back during step 3. On all occasions (where a simple retry hasn't worked) the error code has been 800719e4. On my own laptop I have so far tried the following:- Installed the updates one by one manually - I started on the smallest and one by one have worked towards the largest one which has left me with "Security Update for Windows (KB2286198)" that refuses to install. Renamed all the files in "C:\Windows\Logs\CBS" to "xxx.old" where xxx was the original name with windows update turned off - no change Renamed all the folders in "C:\Windows\SoftwareDistribution" in the same manner - no change Attempted to install it manually "Windows6.0-KB2286198-x86.msu" - no change Tried to un-install IE8 - doesn't work, rolls back at the end (Installing the IE9 Beta when it launched was what alerted me to the issue on this laptop) Ran a "Fix It" thing from the Microsoft Website - no help (Can't find the link now). Tried to recover from the disk - but alas my laptop only has a recovery partition (and was unservice packed original). Ran with nothing running on startup, and only MS services - again no change. Google is being useless with a load of posts trying to get me to call a telephone number with letters in (presumably an American number) The error code appears to mean error log full but no one has any idea which log! The WinUpdate log does indicate the following is the error point though :- 2010-10-23 13:54:48:230 1240 738 Handler WARNING: Got extended error: "POQ Operation SetKeyValue OperationData \Registry\machine\Schema\wcm://Microsoft-Windows-shell32?version=6.0.6002.18287&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers\metadata\elements\HKEY_CLASSES_ROOT_lnkfile_shellex_DropHandler_defaultValue, @default, , ewAwADAAMAAyADEANAAwADEALQAwADAAMAAwAC0AMAAwADAAMAAtAEMAMAAwADAALQAwADAAMAAwADAAMAAwADAAMAAwADQANgB9AAAA" Has anyone any idea how to fix this once and for all - reinstalling laptop after laptop from scratch is mildly annoying at work where Office and Firefox are the only extras, but even more annoying at home - I don't fancy going through the palaver of reinstalling everything yet again.

    Read the article

  • append $myorigin to localpart of 'from', append different domain to localpart of incomplete recipient address

    - by PJ P
    We have been having some trouble getting Postfix to behave in a very specific fashion in which sender and recipient addresses with only a localpart (i.e. no @domain) are handled differently. We have a number of applications that use mailx to send messages. We would like to know the username and hostname of the sending party. For example, if root sends an email from db001.company.local, we would like the email to be addressed from [email protected]. This is accomplished by ensuring $myorigin is set to $myhostname. We also want unqualified recipients to have a different domain appended. For example, if a message is sent to 'dbadmin' it should qualify to '[email protected]'. However, by the nature of Postfix and $myorigin, an unqualified recipient would instead qualify to [email protected]. We do not want to adjust the aliases on all servers to forward appropriately. (in fact, every possible recipient doesn't have an entry in /etc/passwd) All company employees have mailboxes on Exchange, which Postfix eventually routes to, and no local Linux/Unix mailboxes are used or access. We would love to tell our application owners to ensure they use a fully qualified email address for all recipients, but the powers that be dictate that any negligence must be accommodated. If we were to keep $myorigin equal to $myhostname, we could resolve this issue by having an entry such as the following in 'recipient_canonical_maps': @$myorigin @company.com However, unfortunately, we cannot use variables in these map files. We also want to avoid having to manually enter and maintain the actual hostname in 'recipient_canonical_maps' for each server. Perhaps once our servers are 'puppetized' we can dynamically adjust this file, but we're not there yet. After an afternoon of fiddling I've decided to reach out. Any thoughts? Thanks in advance.

    Read the article

  • Can't get past bootcamp Windows logo, freezes immediately after picking boot partition -- Windows 7

    - by cksubs
    Hi, I had a fine install of Windows 7 alongside Snow Leopard. I had a power outage, and Windows restarted. When I booted via the "Hold Option" sceen, it started hanging at the grayscale "Windows logo" (squares) that comes up after picking the Windows drive from the bootcamp loader (the Windows version of the grayscale Apple logo when OS X loads). I think this happened once before, and installing rEFIt helped. I did that, but it continued to hang at the same point. I finally got fed up with it and erased the Windows partition via Disk Utility. I then reinstalled Windows 7 x64 from DVD to the fresh partition. Seemed fine. Ran Windows Update then restarted. FFFFFFFFF. Hangs in the same place. What can I do? Like I said, I already have rEFIt installed. Booting the Windows 7 install CD results in the same infinite loading error. I don't have a spare Snow Leopard disk handy.

    Read the article

  • Is my laptop battery dead?

    - by Josh
    Recently my laptop battery will get extremely hot (definitely hotter than it should get) when I charge it. After that I usually end up removing it once it's fully charged to let it cool down, which takes a couple hours... Question is, is my battery dead? My last battery I had that died just ended up lasting 2 - 3 minutes on battery, no weird heat issues. And is there any way to possibly fix this? Probably not but I won't be able to get a replacement anytime soon. UPDATE: A few days ago when this happened and it cooled down, assuming it was fully charged, I ran my laptop on battery, and the battery life lasted about 10 minutes and then the laptop shutdown. I then plugged it in later and charged it back up, and for a while I had a orange light blinking on my laptop - which I assumed meant the battery was dead, especially since I got 10 minutes battery life. Then today, I turned my laptop on and was surprised to see that the battery was at 20% and charging (it's been plugged in since the incident above, so it should have been fully charged when I shut it off) I let it charge up, and as usual it got pretty hot around the time it was fully charged. So I turned my laptop off and pulled the battery out to let it cool down Now the thing is, just now I tried running it on battery, and it's been going for an hour now... so maybe its not dead? (also the orange light is no longer blinking...) Thanks in advance if anyone knows whats going on, and how to fix it, if its fixable =] EDIT: Some info if it helps... my laptop is about 2 years ago, and it's an Asus K50ID. I know laptop batteries usually don't last more than a year but I'm trying to keep this one going for as long as I can.

    Read the article

  • Truncated content with Apache on Vagrant VM

    - by Nev Stokes
    I'm using Vagrant to run a CentOS VM in order to try and achieve local development parity with our live servers. I've symlinked /var/www/html with the /vagrant shared directory and am forwarding port 80 for viewing at http://localhost:4567. I'm developing using SublimeText 2 on OS X Mountain Lion. Once I figured that iptables was tripping me up, all was well and good. Until I noticed something strange. I have a sample HTML page consisting of several paragraphs of lorem copy. I can view this fine in a browser on OS X. But when I make an edit, for example removing a paragraph, and refresh the content is truncated with the paragraph I deleted still visible. When I cat the files on the server I can see the changes I made but these aren't even reflected when I curl localhost. I strongly suspect that it's a problem with my Apache settings — with which I didn't really tinker — as the issue doesn't arise when I stop Apache and run sudo python -m SimpleHTTPServer 80 in the directory to view pages instead. What gives?

    Read the article

  • Notebook Operating System with extreme support cycles/security updates

    - by leto
    Hello there, after reading the announcements about Mac OS X "Lion" and Apples political decision, I've had enough. I'm a longtime Apple User since 1992, have always felt at home there, but am trying to switch to alternative Operating System since a year. I've also been working with Unix machines since 2001, so I'm looking in one of the free Unices or a Linux. Since I last looked at the desktop in 2002 choke much has changed, it seems. So I'm lost once more in the war between desktop environments and software. To be honest: I don't care what it's name is, I want to get my job done. Here's what I set me as landmark for an operating system/software to be considered: Has to be atleast four years old Has to supply security updates for current release for atleast a year Production quality stability for the whole desktop environment (!) No f****g commercial stuff that tends to supply me with privacy invading App Store or Cloud space So far I'm running a MacBook from 2007, 4 Gig memory, 250 Gig disk and I need: IMAPs for Mail since 1995 Webbrowser sic Shell Keeping current with Updates/Upgrades with no more than 5 Minutes spent in entering commands (makes it hard for OpenBSD ;-) ) A desktop filemanger would be nice, but is a bonus. What can you suggest as operating system? The one with the longest support cycles and best chance to survive the next 10 years will win a new user, even sending patches when needed :-) Greets

    Read the article

  • Time Drift on VM servers, need a reliable solution

    - by zeroasterisk
    We have some windows server 2008 VMware instances on multiple physical servers (hosted) and an application which requires the time to be synced across the server instances. Obviously, VMware has problems with this and we really have never gotten it working any better, we have setup the servers to poll for an NTP update every minute which mitigates the problem (in a fairly crude way). Except that every once in a while, the update will fail (because there's already too much drift) and then windows never does an NTP update afterwards which eventually allows the servers to drift far enough apart that our application breaks, and we notice. We are thinking about changing hosts to Xen servers on approximately the same setup, and I anticipate similar problems. can anyone tell me if Xen has the same time-drift issues VMware does, for guests? can anyone tell me what the best windows server settings are for syncing with an external NTP server to keep things in sync: how frequently do you recommend syncing? (assuming every minute) do you recommend running our own NTP server - even if it has to be on a virtual instance? (assuming not) is there any way to tell windows to sync with the NTP server no matter what the time difference is? any other suggestions for keeping windows servers time in sync? I have become familiar with [ http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1318 ] and it's helped, but it's not been totally effective (see above). thanks much!

    Read the article

  • What is a long-term strategy to deal with CPU fan dust in my home office?

    - by PaulG
    There are numerous discussions of CPU overheating and how sometimes this can be corrected by removing the dust from the CPU fan. I have read many of these, but I can't find anyone expressing a long-term strategy to deal with this problem. There are some suggestions here, for example, about how often the inside of the computer should be dusted. But I find this generally unsatisfactory. As it stands, in my rather dusty house (heated by a wood stove, with no central air circulation), I need to vacuum out the CPU fan every 3 to 4 months. At high CPU load, this can make a difference between 65C and 100C. I'm tired of hauling out the vacuum every time I anticipate high CPU load. What steps can I take to deal with this systematically in the long-term? Moving my high CPU load computing to the cloud is not a realistic option. Neither is vacuuming my home office more than once a week! (Details: my computer is on the floor in a Cooler Master HAF922 case, and uses an Intel CPU fan on an i7 chip) EDIT: While this would definitely solve the problem (submerging motherboard in mineral oil), it is a bit of an expensive solution.

    Read the article

  • smtpd_helo_restrictions = ..., reject_unknown_helo_hostname occasionally rejects mail I care about, how to handle?

    - by lkraav
    I have configured my postfix as follows: smtpd_helo_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unknown_helo_hostname This is working well because most spambots don't seem to have correct reverse lookups. But every once in a while I run into mail I care about getting reject, because the mail source server admin doesn't care about configuring his server correctly. For example here the server introduces itself as "srv1.xbmc.org" which has no DNS record and fails my basic check. Jan 6 04:42:36 mail postfix/smtpd[660]: connect from xbmc.org[205.251.128.242] Jan 6 04:42:37 mail postfix/smtpd[660]: NOQUEUE: reject: RCPT from xbmc.org[205.251.128.242]: 450 4.7.1 <srv1.xbmc.org>: Helo command rejected: Host not found; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<srv1.xbmc.org> I have tried to contact the server admin several times, but there is no response. What is the optimal way to handle this from my side? Is adding these "special" hosts to mynetworks = my only option? Is perhaps my whole smtpd_helo_restrictions setup wrong in some significant way?

    Read the article

  • Concatenating ogg video files from the command line

    - by Noufal Ibrahim
    Okay. I've got a few ogg files I've created using a desktop recording tool. I've transcoded them using ffmpeg once (mainly to clip out the beginnings and the ends). Now, I have 3 such files which I want to concatenate into a single .ogv file. I tried using oggCat, it crashed with some kind of error (I tried concatenating a file to itself using oggCat and that failed too leading me to believe that my distro is shipping a broken version of the package). Simply cating the files works but I can't seek which is not cool. mencoder run like this mencoder -ovc lavc -oac lavc file1.ogv file2.ogv file3.ogv -o complete.ogv. It transcodes the files into an avi and clips off a little of the 3 videos. So, how do I do this? Update 1: My current workaround is to transcode the 3 files into .mpg using ffmpeg, then cating them together and then transcoding them back into ogv. Update 2: PiTiVi works for this kind of thing but I need something from the command line that I can automate and script.

    Read the article

  • Setting up a Network Bridge on Linux VM (Windows 7 Host)

    - by GrandAdmiral
    I would like to use NetEm to simulate a low bandwidth environment while testing an Internet-connected device. My plan is to setup a bridge in a Linux VM (Linux Mint 13) on a Windows 7 host. Unfortunately I'm having trouble setting up the bridge. Then I can use NetEm in the Linux VM to limit the bandwidth to an external device. I went with the following script: ifconfig eth0 0.0.0.0 promisc up ifconfig eth1 0.0.0.0 promisc up Then create the bridge and bring it up: brctl addbr br0 brctl setfd br0 0 brctl addif br0 eth0 brctl addif br0 eth1 dhclient br0 ifconfig br0 up When I run that script, I see the following warning: Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service smbd reload Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the reload(8) utility, e.g. reload smbd The device connecting to the bridge is able to obtain an IP Address, but it can only ping the IP Address of the bridge (both are 10.2.32.xx). Then after a few minutes, other parts of our network go down. I'm not sure why, but once I kill the bridge the network is fine. Is it possible to setup a network bridge in a Linux VM? Do I need to do something else with the dhclient br0 part of the script? By the way, I'm using VirtualBox. The wired connection is eth0 and the wireless connection is eth1. The wired connection is connecting to the device and the wireless connection is going to the network. Both adapters are set up as bridged adapters with promiscuous mode set to "allow all".

    Read the article

  • TCP Handshake and port numbers

    - by Guido
    (I have a question about the TCP handshake and how port numbers are assigned, if this does not belong here, let me know.) Hi, I'm studying TCP/IP from the book "Internetworking with TCP/IP" by Douglas Comer. In the TCP chapter it mentions that TCP defines an "endpoint" as a pair (IP address, port number), and a connection is defined by two endpoints. This has a few implications, such as, a local TCP port could be in several connections at once, as long as there are no two from the same IP and the same remote port. This also means that the amount of established connections is almost limitless (2^16 for every IPv4 address. 2^48 in total). Now, in class, I was told that when one connects to a listening port, both sides agree on a different port to use, so the communication can happen and the listener socket remains free. This was also my belief before reading the book. Now I feel like I should obviously trust the book (It's Comer!), but is there any truth to the other explanation? Thanks

    Read the article

  • Bridging my laptop's wireless and wired adaptors

    - by stacey.richards
    I would like to be able to connect a desktop computer that does not have a wireless adapter to my wireless network. I could just run a network cable from my ADSL/wireless router to the desktop computer but sometimes this is not practical. What I would really like to do is bridge my laptop's wireless and wired adapters in such a way that I can run a network cable from my laptop to a switch and another network cable from the switch to a desktop computer so that the desktop computer can access the Internet through my ADSL/wireless router via my latop: +--------------------+ |ADSL/wireless router| +--------------------+ | +-------------------------+ |laptop's wireless adaptor| | | |laptop's wired adaptor | +-------------------------+ | +------+ |switch| +------+ | +-----------------------+ |desktop's wired adapter| +-----------------------+ A bit of Googling suggests that I can do this by bridging my laptop's wireless and wired adapters. In Windows XP's Network Connections I select both the Local Area Connection and the Wireless Network Connection, right click and select Bridge Connections. From what I gather, this (layer 2?) bridge will examine the MAC address of traffic coming from the wireless network and pass it through to the wired network if it suspects that a network adapter with that MAC address may be on the wired side, and vice-versa. If this is the case, I would assume that when the desktop computer attempts to get an IP address from a DHCP server (which is running on the ADSL/wireless router), it would send a DHCP broadcast packet which would pass through the laptop's bridge to the router and the reply would return through the laptop's bridge back to the desktop. This doesn't happen. With some more Googling I find some instruction how this can be done with Linux. I reboot to Ubuntu 9.10 and type the following: sudo apt-get install bridge-utils sudo brctl addbr br0 sudo brctl addif br0 wlan0 sudo brctl addif br0 eth0 sudo ipconfig wlan0 0.0.0.0 sudo ipconfig eth0 0.0.0.0 Once again, the desktop cannot reach the ADSL/wireless router. I suspect that I'm missing some simple important step. Can anyone shed some light on this for me?

    Read the article

  • Write permissions on uploaded files - PHP & Linux

    - by letseatfood
    I am working on a PHP script that transfers files using FTP functions. It has always worked on my production server (which is a hosting service). The development server I have just setup (I am a novice to servers) is Debian Lenny with Apache2, PHP5, and MySQL5. The file transfer works correctly, but once the file has been written to the server, it has permissions of 600. This makes it impossible for me to view the file (JPEG) in the web browser, as permission is denied. I have scoured the internet and even broken my server installation and reinstalled it trying to figure this out (which has been fun, nonetheless!). I know it is unwise to set 777 permissions on public accessible files, but even that will not solve the problem. The only thing that works is if I chmod 777 thefile.jpg after it has been transferred, which is not a working solution. I tried changing the owner of my site files to www-data per this post, but that also does not work. My user is mike, and it still does not work whether the owner of the files is mike or root. Would somebody point me in the right direction? Thanks! And, of course, let me know if I can clarify anything.

    Read the article

  • VMWare steals IP addresses

    - by Ishan Amin
    I'm having a peculiar problem, that I think I have narrowed down to VMware. For the past one year, every once in a while we lose internet connection and not all users (about 10 users) go down at the same time, its usually one-by-one. First someone will call me and say "Internet is down" and then we would go reset the router and modem and switch and it would be working again for a while, then go down again without any pattern or replicatable sequence. We'd go repeat the steps again to get everyone in the office running again. We called our Internet Service Provider and they constantly say, We see your modem and we see your router and from thier end everything is OK. we replaced our router and switch and modem, twice! Last friday, it dawned upon me, that everytime we turn on a VMware machine, this sequence of taking everyone down starts, which also explains the message that my users get for "IP Conflict Found" So we do alot of VMware testing and lo and behold, it takes my Internet down. My Yahoo and Gtalk would continue working but www is down when the VMware machines are started. I do use bridged networking to all the VMware machines, but I dont know what else to set it at. now, sorry for this long rambling but anyone have any clue on how to stop this? thanks IA

    Read the article

  • stdout, stderr, and what else? (going insane parsing slapadd output)

    - by user64204
    I am using slapadd to restore a backup. That backup contains 45k entries which takes a while to restore so I need to get some progress update from slapadd. Luckily for me there is the -v switch which gives an output similar to this one: added: "[email protected],ou=People,dc=example,dc=org" (00003d53) added: "[email protected],ou=People,dc=example,dc=org" (00003d54) added: "[email protected],ou=People,dc=example,dc=org" (00003d55) .######## 44.22% eta 05m05s elapsed 04m spd 29.2 k/s added: "[email protected],ou=People,dc=example,dc=org" (00003d56) added: "[email protected],ou=People,dc=example,dc=org" (00003d57) added: "[email protected],ou=People,dc=example,dc=org" (00003d58) added: "[email protected],ou=People,dc=example,dc=org" (00003d59) Every N entries added, slapadd writes a progress update output line (.######## 44.22% eta 05m05s elapsed ...) which I want to keep and an output line for every entry created which I want to hide because it exposes people's email address but still want to count them to know how many users were imported The way I thought about hiding emails and showing the progress update is this: $ slapadd -v ... 2>&1 | tee log.txt | grep '########' # => would give me real-time progress update $ grep "added" log.txt | wc -l # => once backup has been restored I would know how many users were added I tried different variations of the above, and whatever I try I can't grep the progress update output line. I traced slapadd as follows: sudo strace slapadd -v ... And here is what I get: write(2, "added: \"[email protected]"..., 78added: "[email protected],ou=People,dc=example,dc=org" (00000009) ) = 78 gettimeofday({1322645227, 253338}, NULL) = 0 _######## 44.22% eta 05m05s elapsed 04m spd 29.2 k/s ) = 80 write(2, "\n", 1 ) As you can see, the percentage line isn't sent to either stdout or stderr (FYI I have validated with known working and failing commands that 2 is stderr and 1 is stdout) Q1: Where is the progress update output line going? Q2: How can I grep on it while sending stderr to a file? Additional info: I'm running Openldap 2.4.21 on ubuntu server 10.04

    Read the article

  • Win7 VM @ ESXi Server @ VMWorkstation (Win7) - ping works only from VM -> HostOS, not vice versa

    - by DK2000
    right now I'm toying around with VM Ware stuff and not having any pcs then my laptop I decided to run an ESXi Server inside of VWmware Workstation. I was just curios to see if the server would allow to setup and run a VM. And after some tweaking there it was, working like a charm. Okay not that fast but startin' the VM from vSphere and "opening a console" gave my direct access to that VM. Now I wanted to see if I could ping the host from the VM (VM Workstation Network is set to "host only"). And it worked, at least from the VM I could ping the ESXi server and the host. From the host I am able to ping the ESXi Server but I can't ping the VM! I asked myself anyway where the VM got its ip adress from. At the DCHPs IP there is at no machine after all. I even tried to use that DHCP adress for my Host and it didn't work out. You can see my settings from the screenshot here (it's pretty wide so just a link): http://yfrog.com/n4desktopfeop The only thing that got me thinking was when I once changed the ESXi's IP from 192.168.92.137 to 192.168.0.137. I still was able to connect to the ESXi server via its new IP but when I tried to run the VM console from vSphere I got an error after a while that said "couldnt connect to 192.168.92.137:903". So vSphere connects just through a port of the ESXi server to the VM?!? Could I setup a Linux VM to use it as a DHCP that I'd at least have control over the IPs that are given. Which lowest end linux could be used for this purpose?!? Thank you for your time! :)

    Read the article

  • Setting Up My Home Network

    - by Skizz
    I currently have five PCs at home, three running WinXP and two running Ubuntu. They are set up like this: ISP ----- Modem ---- Switch ---- Ubuntu1 -- B&W Printer | |--WinXP1 | |--WinXP2 Wireless |--Colour Printer | |---------Ubuntu2 |---------WinXP3 (laptop) The Ubuntu1 machine is set up as a PDC using Samba and runs fetchmail, procmail, dovecot to get my e-mail and allow me to access the e-mail via imap so I can read the e-mail on any PC. I'd like to set up the network like this: ISP ----- Modem ---- Ubuntu1 ---- Switch ------WinXP1 | | |--WinXP2 B&W Printer Wireless |--Colour Printer | |---------Ubuntu2 |---------WinXP3 (laptop) My questions are: How to configure Ubuntu1 to act as a firewall. How to configure Ubuntu1 to provide a consistant user authentication across the network, at the moment Samba provides roaming profiles for the XP machines but the Ubuntu2 machine has it's own user lists. I'd like to have a single authentication for both XP machines and linux machines so that users added to the server list will propagate to all PCs (i.e. new users can log on using any PC without modifying any of the client PCs). How to configure a linux client (Ubuntu2 above) to access files on the server (Ubuntu1), some of which are in user specific folders, effectively sharing /home/{user} per user (read and write access) and stuff like /home/media/photos with read access for everyone and limited write access. How to configure the XP machines (if it is different from a the Samba method). How to set up e-mail filtering. I'd like to have a whitelist/blacklist system for incoming e-mails for some of the e-mail accounts (mainly, my kids' accounts) with filtered e-mails being put into quaranteen until a sysadmin either adds the sender to a blacklist or whitelist. OK, that's a lot of stuff. For now, I don't want config files*, rather, what services / applications to use and how they interact. For example, LDAP could be used for authentication but what else would be useful to make the administration of the LDAP easier. Once I have a general idea for the overall configuration, I can ask other questions about the specifics. Skizz I have looked around for information, but most answers are usually in the form of abstract config files and lists of packages to install.

    Read the article

  • Cutting Ubuntu to the bone for Virtualbox VM

    - by user32853
    I've been looking around for a Linux variant which will install only the software I need rather than everything Ubuntu (for example) puts in by default. This is to create a virtual machine in Virtualbox which has bash, apache, python, perl, SQLite, openssh and a few other programs but nothing else. I'd prefer to go with Ubuntu if possible but another modern distro would do as well (I like using apt-get and yum rather than downloading/compiling etc). So far, I've tried: SuseStudio.com, which is probably the best so far. Pressing F4 to get the boot options on Ubuntu 9.10, but there is no minimal installation (I think there was once). Arch Linux, slightly confusing install procedure but I might go back and try again. Gentoo, started well but fairly soon the HD on the virtual machine went to 2Gb, even before the installation had started in earnest (I'd partitioned the disks is all). I realise there are various "small" Linuxes around like Puppy, Feather, DSL, etc, but they seem to be aimed at desktop users or as a techie's toolkit, and I want a small-as-possible server distro which can be managed with tools like apt or yum or similar. TIA for any advice you can offer! -- Monty

    Read the article

< Previous Page | 632 633 634 635 636 637 638 639 640 641 642 643  | Next Page >