Search Results

Search found 21644 results on 866 pages for 'connection speed'.

Page 637/866 | < Previous Page | 633 634 635 636 637 638 639 640 641 642 643 644  | Next Page >

  • iptables redirect single website traffic to port 8080

    - by Luke John Southard
    My goal is to be able to make a connection to one, and only one, website through a proxy. Everything else should be dropped. I have been able to do this successfully without a proxy with this code: ./iptables -I INPUT 1 -i lo -j ACCEPT ./iptabels -A OUTPUT -p udp --dport 53 -j ACCEPT ./iptables -A OUTPUT -p tcp -d www.website.com --dport 80 -j ACCEPT ./iptables -A INPUT -m conntrack --cstate ESTABLISHED,RELATED -j ACCEPT ./iptables -P INPUT DROP ./iptables -P OUTPUT DROP How could I do the same thing except redirect the traffic to port 8080 somewhere? I've been trying to redirect in the PREROUTING chain in the nat table. I'm unsure if this is the proper place to do that tho. Thanks for your help!

    Read the article

  • Power outage during disk wipe. What do I do now?

    - by Mark Trexler
    I was using Roadkil Diskwipe on an external hard drive and the power went out. I had removed it from any outlet connection by the time power was restored to prevent power-spike damage (it's on a surge protector, but I didn't want to rely on that). My question is, where do I go from here? Obviously I don't care about preserving any data currently on it, I just want to make sure the drive itself is not terminally damaged. I'm running chkdsk (full), but I don't know if that's the correct step to assessing any damage. If it makes any difference, the hard drive was unallocated at the time of the outage, as Diskwipe requires that for it to run. Also, could something like this cause latent problems with the drive itself (i.e. serious issues that I won't be aware of when testing it now). I'd appreciate any program recommendations if chkdsk is not the most appropriate diagnostic route. Thank you.

    Read the article

  • IPP Printing from Windows 7 Ultimate

    - by Casey
    I have network IPP working on Ubuntu and Windows XP. On my Windows 7 instance, it refuses to acknowledge the remote server connection. Can anyone suggest how to configure this correctly? My install steps are: Add Printer Add a Local Printer Create a New Port and "Standard TCP/IP Port" Enter hostname http://host:631/printers/Printer_Name After that it says the printer is not detected, asks me to pick a driver, and finish up. Trying to use the device does not produce any output? If anyone has got this work, I would really appreciate a fix.

    Read the article

  • Reliance on Outlook (been a looong time, I know)

    - by AndyScott
    Do you feel that your development group too reliant on Outlook? Have you reached a point that you have to search your email for pertinent information when asked? What are you using? I realized things had gotten out of hand a couple weeks ago over a weekend. I was at my in-laws house (in the country, no PC/laptop, no internet connection; and I get an email on my phone that I needed to reply to, but I couldn't send without deleting items from my inbox/sent items/etc. Now mind you, I have rules set up to move stuff into folders, and files more than a month old are automatically moved to the PST; but generally don't manually move items to a PST until I have had a chance to 'work' the item. Please don't bother mocking my process, it's just the way I work. That being said, it was a frustrating process of 'I need all this information, what can I afford to lose'. I work on an International project (think lots of customers), and conversations in 9 or 10 different directions about 10-20 different things are not abnormal for a given day. I have found myself looking data up in Outlook because that's where it is. I think that I have reached the point now, where I don't feel that Outlook is up to the task of organizing the data that it contains.   When you have that many emails (200 or so a day), information seems to get lost at times, and I find that Outlook's search capabilities are lacking. Additionally, I find that any sort of organizational 'system' of sorting emails that can cover multiple topics is a lost cause. But at the same time, the old process of taking the information that I got from emails and moving it into another 'notes' type of program has proved to be too time consuming. Anyone out there have some better type of system? (Comments about the capacity of my brain, and it's ability to recall information not needed.)

    Read the article

  • Network tries to reindentify itself now and then

    - by Don Young
    When the computer starts up it connects itself to the router (ZTE 4G router) automatically, but after I have surfed the web for a while, it tries to identify itself, meaning you get that little blue circle next to the little screen at the corner. When browsing it does not cause any problems, but if I'm streaming a video the video will then stop, I'll have to refresh the page to make the video start again. And if I'm playing a game, LoL for example, the game will freeze for about 2 seconds then continue again (due to lost connection to the internet). I have no virus on my computer, although I had before. I have reset my router, restarted my computer, updated my ethernet driver, checked so that the IPv4 is set on automatic and tried different router channels. I have had this router for a few months and the problem just started recently. Here is the ipconfig screen:

    Read the article

  • Securing internal data accessed by a website on the big, bad internet

    - by aehiilrs
    A close relative of this question on Stack Overflow: When you have a web site in your DMZ that needs to access production data stored on an internal DB, what strategies do you recommend using to lower the risks that come from accessing live data? Is it even considered acceptable to have a connection initiated from the DMZ come inside of your network? An extra detail about the nature of the site that kind of throws a monkey wrench into the machinery is that people using the web site will be competing for "spots" on a first-come, first-serve basis with others using the internal software. Because of this, as close to zero lag time between the two applications as possible is ideal.

    Read the article

  • Is it possible to boot from internet?

    - by Calmarius
    Let's assume the following situation: you have a computer with empty hard disk, and you don't have a CD, floppy, pen drive nearby to boot the computer from. But you have connection to the Internet. Modern computers support network booting using PXE, but I haven't found anything regarding booting via the internet. So, is it possible to use PXE to load an image from the internet and boot it? By having a running system (even a minimal Linux) in RAM, it should be possible to install it on the hard disk, and build up a working system from here.

    Read the article

  • CentOS Can't connect to FTP

    - by Steven
    I'm having troubles connecting to my ftp server. Here's what it says, Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/home/sxxxn" Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Error: Connection timed out Error: Failed to retrieve directory listing My vsftpd.conf file: local_enable=YES write_enable=YES local_umask=022 dirmessage_enable=YES xferlog_enable=YES connect_from_port_20=YES ftpd_banner=Welcome to xxxx.com xferlog_std_format=NO chroot_local_user=NO chroot_list_enable=NO chroot_list_file=/etc/vsftpd/chroot_list listen=YES pasv_enable=YES pasv_min_port=3000 pasv_max_port=3050 pasv_address=64.xx.xx.xxx pam_service_name=vsftpd userlist_enable=YES userlist_deny=NO userlist_file=/etc/vsftpd/vsftpd.userlist And I've got these 2 in my iptables -A INPUT -p tcp -m tcp --dport 21 -j ACCEPT -A INPUT -p tcp -m tcp --dport 3000:3050 -j ACCEPT I've also disabled selinux.

    Read the article

  • BumbleBee / getting Nvidia 310.19 Drivers to Work | 12.10

    - by Charles Mynard
    Asus U31JG - A1 Laptop: -Intel Core i3 -Nvidia 415m / Intel HD Graphics ( Optimus Technology ) Hello, I have been trying for about 3 weeks now to get any kind of Nvidia driver to work, and now am determined to get the 310.19 driver to work. I have tried numerous times of which either nothing happened or my interface ( menu bars, the top and left bar on desktop, and the ability to close a window) would disappear. Apparently I'm not making the connection on how to get these to install properly. I have tried numerous other posts and websites and attempted "bumblebee" to no avail. I am wondering if anyone can write a step by step guide of commands that I need to run in terminal to get this to work. I've had to reinstall 12.10, so if you could walk me through the process of getting the drivers downloaded and installed, I would greatly appreciate it. I barely know what I'm doing, and this is quite a turn off for someone new to Ubuntu, I really want to enjoy it but this is preventing me from committing. Thank you in advance, and I apologize for being so flustered / helpless with this but I have ran out of patience with this.

    Read the article

  • Combine VPN bandwith over two or more WAN connections? Load balancing?

    - by mistrfu
    Imagine you only have DSL with 5mbps Down and 2mbps Up. Is it possible to have 10 of these for example and combine them in a way that would increase the upstrean bandwidth to one server? In my head it works like this: intranet with one gateway/router router connected to multi wan load ballancer on each ballancer wan port router with vpn clinet set up, tunneling to a server ?some? software on the server in cloud joining all these connection into one interface again I would need this mostly for big uploads to a server, downlink to the office is not that important at all. Does it even make sense? I drew an image to clarify.

    Read the article

  • Exceptions from automongobackup, yet script completes

    - by chakram88
    I am using automongobackup to, well, automate the backups of mongodb. output from the script (to STDERR) has the following exceptions (but the backup completes, and the dump files are created) ###### WARNING ###### STDERR written to during mongodump execution. The backup probably succeeded, as mongodump sometimes writes to STDERR, but you may wish to scan the error log below: exception: connect failed exception: connect failed exception: connect failed exception: connect failed exception: HostAndPort: bad port # exception: connect failed exception: connect failed exception: connect failed exception: connect failed exception: connect failed exception: connect failed I know that the Host & Port are correct. If I run mongodump --host=127.0.0.1:27017 --journal (which is the effective command from automongobackup based on the options set and my reading of the src code) everything runs clean without any error reporting and the dump files are created as expected. Why would automongobackup report connection errors, even tho it does create the dump files, yet a straight call to mongodump does not? Debian 6.0 Lenny (from Linode image: Latest 3.2 (3.2.1-x86_64-linode23)) AutoMongoBackup VER 0.9 mongodb v 2.0.2

    Read the article

  • Cannot run gnome-session

    - by Brian
    I'm having issues running an X Windows session on a RHEL5 64-bit server - whenever I execute the command "gnome-session &", the process goes into the background but nothing happens. I have Exceed installed on my Windows machine which is running when I try to start the gnome-session. I've tried just starting firefox by itself instead of the whole gnome session, but it doesn't work either. Any suggestions? BTW, here's the error message I get when I try to start firefox: firefox: Fatal IO error 104 (Connection reset by peer) on X server localhost:10.0.

    Read the article

  • Prevent runaway threads and ultimately physical overheating and battery drain on Android [migrated]

    - by foampile
    I was wondering if there is a system monitor app that will raise (audible) alerts and offer app closure if it detects runaway threads on Android that cause physical overheating and battery drain. E.g., I just had to turn my phone off because there was a runaway thread that I think was constantly trying to refresh FB where there was very poor connection, so it was going in a virtually endless loop. But I get that with other apps too and not just Facebook. I'd like to actually shut apps down when they're detected. I am not kidding, I nearly burned my fingertips when I touched my phone -- it was on for only 2 hrs and the battery was almost dead. It is because 4G is very poor inside my office building and I checked Facebook walking between my vehicle and the building this AM. After that, the app kept trying to refresh continuously without success and overheating the phone.

    Read the article

  • Hylafax with serial over IP modem

    - by zero_r
    I'm looking into virtualizing a Hylafax server which currently runs on a dedicated hardware running CentOS with a Divalogic card. The main issue obviously is, how to connect the modem to the VM. There are serial over IP devices available at digi.com. Maybe there are others? Regarding digi.com devices, as far as I understood one can install the RealPort software and then have a /dev/ttySx device presented to the Linux server. This device then can be used as serial connection to the modem. Does someone have such a configuration in place? Or does someone have another idea to virtualize a Hylafax server (outbound faxes only). Thank you in advance

    Read the article

  • WiFi problems on several Ubuntu installations

    - by Rickyfresh
    Okay this is the first time I have ever had to ask a question as usually the Ubuntu community have answered everything already but on this occasion there are many people asking for the answer but not one good solution has become available so far so someone please help or I will have to install Windows on my sons and my girlfriends PCs and that would be a disaster as I am trying to help convince people to move from Windows. I installed 12.04 on three computers on the same day. Dell Inspiron (Works Perfect) Toshiba Satellite Home built Desktop The Dell works perfect but the other two either keep losing connection to the wireless Internet and even when they are connected they stop connecting to web sites, for some reason it searches Google fine but will not connect to web sites when a link is clicked. So far people have recommended in other forums: Removing network manager and installing wicd (didn't solve it) Changing the MTU in the wireless settings (didn't solve it) All sorts of messing about with Firefox settings (this doesn't solve it and even if it did this would leave most average PC users scratching their heads and wishing they had stuck to windows) The problem exists on two very different machines and different wireless cards so I doubt its a driver or hardware issue, also many other Ubuntu users are having the same problem with a vast array of different machines and wireless cards. Can someone please give a good solution to this as its going to turn a lot of people away from Ubuntu if they cannot get this sorted. I would give some PC specs but the two machines are vastly different and the other people complaining of this problem also have very different systems all showing the same problem.

    Read the article

  • Solaris 11 VNC Server is "blurry" or "smeared"

    - by user12620111
    I've been annoyed by quality of the image that is displayed by my VNC viewer when I visit a Solaris 11 VNC server. How should I describe the image? Blurry? Grainy? Smeared? Low resolution? Compressed? Badly encoded? This is what I have gotten used to seeing on Solaris 11: This is not a problem for me when I view Solaris 10 VNC servers. I've finally taken the time to investigate, and the solution is simple. On the VNC client, don't allow "Tight" encoding. My VNC Viewer will negotiate to Tight encoding if it is available. When negotiating with the Solaris 10 VNC server, Tight is not a supported option, so the Solaris 10 server and my client will agree on ZRLE.  Now that I have disabled Tight encoding on my VNC client, the Solaris 11 VNC Servers looks much better: How should I describe the display when my VNC client is forced to negotiate to ZRLE encoding with the Solaris 11 VNC Server? Crisp? Clear? Higher resolution? Using a lossless compression algorithm? When I'm on a low bandwidth connection, I may re-enable Tight compression on my laptop. In the mean time, the ZRLE compression is sufficient for a coast-to-coast desktop, through the corporate firewall, encoded with VPN, through my ISP and onto my laptop. YMMV.

    Read the article

  • Network share not always available

    - by CapSoft
    Hello everybody, we have a windows 2003 server with a shared directory. I've seen this thread but this wasn't any help: http://superuser.com/questions/58890/the-specified-network-name-is-no-longer-available I have a ping -t running from 3 pc's (vista and two windows 7) they all work. the things appear when two users enter the network share then this 'network share is no longer available' appears and the explorer windows turn white. after f5 or refresh the shared directory is back. this is really strange. there is no anti virus or kasparsky running on either end. this is all in a LAN. the internet connection is really stable, so it's really strange can it be a router issue? I have checked the eventlog on the server for diskfailure related messages, but there are none.

    Read the article

  • SFTP not working, but SSH is

    - by Dan
    I've had a server running CentOS for a few months now. A few days ago, I stopped being able to connect to it over SFTP. I've tried from multiple computers, OSes, clients, and internet connections. I can SSH in just fine, though. For example, Nautilus gives me this: Error: DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. Please select another viewer and try again. I was under the impression that SFTP was just pure SSH, and if one worked, the other would, and vice-versa. Clearly that's not the case, though. What could I have done wrong?

    Read the article

  • Keeping the wireless connected.

    - by casr
    I’m running OpenBSD on a computer which is connected via wireless to the network. It is a well supported NIC and I’ve had no problems with it from a hardware perspective. Unfortunately my wireless access point occasionally loves to forget it’s settings. I then have to help it remember. However, in this intervening time my OpenBSD box drops the connection and then does not automatically reconnect. I have alleviated my problems by running this simple script in the background: #!/bin/sh while [ 1 ] do ping -c1 192.168.1.254 > /dev/null if [ $? = 1 ] then sh /etc/netstart ral0 > /dev/null fi sleep 30 done [Ping the access point. If there is no response attempt to reconnect.] It seems to me to be a very suboptimal solution. Has anyone else come across a better way?

    Read the article

  • SSL on Apache seems to significantly affect WebDAV performace

    - by takesides
    I'm using Apache 2.2 running on Windows Server 2008 R2 as a WebDAV server for clients to upload large media files (roughly 100-2000MB). I am finding that when I have SSL enabled (openSSL 0.9.8o) and use HTTPS for the uploads the throughput is around 13Mbps but when I disable it and just use HTTP I get around 80Mbps. I can't understand why this is happening as my understanding was that the heavy SSL work was done at the beginning of the connection. Does anyone have any idea why the performance is so drastically affected by enabling SSL? Cheers.

    Read the article

  • apache dont send me mp3 header even when use direct address to the file

    - by user1728307
    apache dont send me mp3 header even when use direct address to the file, it means i can play it with flash audio players on my web pages, but when i tried to download from direct address on my server i got "Error 101 (net::ERR_CONNECTION_RESET): The connection was reset" or sometimes gives me a file with mp3 extension that has just 13B files-size, and when i open that file in gedit/notepad there is just: <html></html> i dont have any problem with php files and images, but mp3 files never be send to browser for download or play. i added this code to httpd.conf: AddType audio/mpeg .mp3 but there is not any difference!! thanks in advance

    Read the article

  • Test JPQL with NetBeans IDE 7.3 Tools

    - by Geertjan
    Since I pretty much messed up this part of the "Unlocking Java EE 6 Platform" demo, which I did together with PrimeFaces lead Çagatay Çivici during JavaOne 2012, I feel obliged to blog about it to clarify what should have happened! In my own defense, I only learned about this feature 15 minutes before the session started. In 7.3 Beta, it works for Java SE projects, while for Maven-based web projects, you need a post 7.3 Beta build, which is what I set up for my demo right before it started. Then I saw that the feature was there, without actually trying it out, which resulted in that part of the demo being a bit messy. And thanks to whoever it was in the audience who shouted out how to use it correctly! Screenshots below show everything related to this new feature, available from 7.3 onwards, which means you can try out your JPQL queries right within the IDE, without deploying the application (you only need to build it since the queries are run on the compiled classes): SQL view: Result view for the above: Here, you see the result of a more specific query, i.e., check that a record with a specific name value is present in the database: Also note that there is code completion within the editor part of the dialog above. I.e., as you press Ctrl-Space, you'll see context-sensitive suggestions for filling out the query. All this is pretty cool stuff! Saves time because now there's no need to deploy the app to check the database connection.

    Read the article

  • netgear GS108TV2 RSTP configuration

    - by jhowland
    I have a large set of GS108TV2 units--my goal is to set up a network which is comprised of several loops for redundancy/fault tolerance. I have a minimal 3 switch loop configured, with RSTP enabled on two ports on each switch. I have my bridge max age set to 6, and my bridge forward delay set to 4, which are the minimum values allowed. Hello time is fixed at 2 seconds. The switches respond to a cable being removed from a socket, but it takes too long. I cannot get the switch to respond to a loss of connection on one of the redundant ports in less than 20 seconds. Is there any way to configure these switches to respond faster than 20 seconds? That is unacceptable for my application. thanks in advance for any help

    Read the article

  • Spare PC with XP to be used as Torrent Downloader and local Web Server HOWTO?

    - by gslide
    Hi I'm a bit in a pickle in trying to setup my old laptop using Windows XP to be able to serve as two devices in one, I want to make it a downloader for torrents and a local web server as well and how to do this? I have a wireless NIC and LAN, and I have two internet connections and i would like to be able to download torrent only on LAN and be a webserver on the Wireless, also the webserver can be accessed through the internet. The reason for trying to separate the connection is I can't have torrent downloads using all my bandwidth as my web pages cant be access as it times out or too slow. I have two broadband connections, is this even possible or would i need a different OS or program that I can download? please

    Read the article

  • Software Error Basics

    Software Error Basics Who Causes Errors?   Software errors are caused by: ·    End-users ·    Programmers ·    Computer Systems   What Causes Errors?   Software errors are caused by: ·    Programmer Mistakes and Assumptions ·    Invalid data ·    Unexpected User Interactions ·    Missing Resources o  Files o  Databases o  Network Connectivity ·    Poor network connection ·    Insufficient Permissions   Where Do Errors Occur?   Software errors can occur anywhere code is executed:   ·    Desktop PC ·    Laptop PC ·    Server ·    Tablet PC ·    Mobile Phone ·    Any Device that can execute software   When Do Errors Occur?   Software errors occur when source code is being compiled (Compile-Time) or executed (Run-Time).  

    Read the article

< Previous Page | 633 634 635 636 637 638 639 640 641 642 643 644  | Next Page >