Search Results

Search found 18842 results on 754 pages for 'the machine'.

Page 639/754 | < Previous Page | 635 636 637 638 639 640 641 642 643 644 645 646  | Next Page >

• Loads of memory in "standby" on Windows Server 2008 R2

  - by Jaap

  In our SharePoint farm, our Web Front End servers all have loads of memory in "standby" mode, meaning very little is available for our IIS worker process. We have 32 GB of RAM in each of the boxes, and standby memory will creep up to about 28 GB, whereas the IIS worker process only seems to be using about 2 GB. Also, we've seen the machine use the swap file extensively while this memory was in standby, so I am starting to think that this memory in standby mode is stopping IIS from using it, forcing it to swap to disk, causing more performance problems. I used SysInternals RamMap to indentify what is being kept in memory, and it was able to tell me that almost everything in standby memory is of type "Mapped File". When I sort the files listed under the file summary tab in RamMap by file size, the largest files (around a few hundred meg each) are IIS log files and SharePoint log files. I would like to understand which process is loading these files into standby memory and why they are not being released. When I do an iisreset, it does not release the memory. Any ideas? Thanks!

  Read the article

• server 2008 r2 stuck on installing updates

  - by volody

  I have 2008 r2 64bit server that is stuck on installing updates. It shows message "Please do not power off or unplug your machine. Installing 57 of 61.." This message is shown for 3 hours now. I was trying to connect to this server using mmc. runas /user:AdministratorAccountName@ComputerName "mmc %windir%\system32\compmgmt.msc" RUNAS ERROR: Unable to run - mmc C:\Windows\system32\compmgmt.msc 1311: There are currently no logon servers available to service the logon request. What else can I do? Update: Remote Desktop does not work. It just disappear after entering username and password from Win7-64 computer Update: I have disconected server. Now Server Manager in Roles Summary shows message "Unexpected error refreshing Server Manager: The remote procedure call failed." Event log shows Could not discover the state of the system. An unexpected exception was found: System.Runtime.InteropServices.COMException (0x800706BE): The remote procedure call failed. (Exception from HRESULT: 0x800706BE) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at Microsoft.Windows.ServerManager.ComponentInstaller.ThrowHResult(Int32 hr) at Microsoft.Windows.ServerManager.ComponentInstaller.CreateSessionAndPackage(IntPtr& session, IntPtr& package) at Microsoft.Windows.ServerManager.ComponentInstaller.InitializeUpdateInfo() at Microsoft.Windows.ServerManager.ComponentInstaller.Initialize() at Microsoft.Windows.ServerManager.Common.Provider.RefreshDiscovery() at Microsoft.Windows.ServerManager.LocalResult.PerformDiscovery() at Microsoft.Windows.ServerManager.ServerManagerModel.CreateLocalResult(RefreshType refreshType) at Microsoft.Windows.ServerManager.ServerManagerModel.InternalRefreshModelResult(Object state) Update: Manual update hangs on (Installing update 58 of 62...) Seurity Update for Windows Server 2008 R2 x64 Edition (KB979309) Update: It could be an issue with that admin user was renamed

  Read the article

• Deleting "undeletable" files in Vista

  - by Nik Reiman

  I recently upgraded my workstation from XP SP3 to Vista Business, and during the upgrade Windows moved my old C:\Windows directory to C:\Windows.old. I got all of the stuff I needed out of that folder, but there are six "undeletable" files there so I cannot remove it. They are: Windows.old\Program1\Adobe\Reader 9.0\Resource\CMap\Identity-H Windows.old\Program1\Adobe\Reader 9.0\Resource\CMap\Identity-V Windows.old\Program1\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelper.dll Windows.old\Program1\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelperShim.dll Windows.old\Program1\Common Files\Adobe\Acrobat\ActiveX\AcroPDF.dll Windows.old\Program1\Common Files\Adobe\Acrobat\ActiveX\pdfshell.dll Whenever I try to delete the files either through explorer or a command line, I get a permission denied error. I have tried to grant myself full permission on the files, but again, permission denied. I don't even have acrobat installed on my Vista machine, and I uninstalled Adobe updater. However, I still can't manage to get rid of these files. How do I nuke them for good? Edit: I was able to take ownership of the files, but I still can't delete them. Renaming them did not work, as I was denied permission to do that as well. I'll try booting up in safe mode and getting rid of them there. Edit II: Booting up into safe mode did not allow me to delete the files. Bummer.

  Read the article

• Ubuntu 12.04 open port 80 inside WLAN

  - by Eduard

  I have an nginx server running on ubuntu 12.04 that serves http through port 80 and https through port 443. Everything works fine if I access it from the same computer via localhost, 127.0.0.1 or the local IP 192.168.0.11. If I try to access the server from another computer in the same VLAN it does not work for http; it works for https. I have changed my nginx configuration to also listen to port 8000 for http; I can then access http from the other computer in the same VLAN via "http://192.168.0.11:8000". I also have a web server running on port 80 on a windows machine and can access it from another device in the same VLAN, therefore the router is not blocking incoming http traffic. The nginx process is run by root. I have used tcpdump and I see that packets are arriving to Ubuntu: 192.168.0.16.49735 192.168.0.11.80 and that some response is being given 192.168.0.11.80 192.168.0.16.49735 (I do not know what the response is though). There is no request arriving at the nginx web server (I have checked the access log). I have iptables empty. I have unsuccessfully tried to find a solution for a long time to this, it has now become a matter of happiness or bitterness :).

  Read the article

• Ubuntu networking issue: two specific machines cannot browse web while connected to network at the same time.

  - by jensendarren

  I have setup a secure wireless network which works very well except for two laptops running Ubuntu 10.10 that can't access the Internet via a browser at the same time. They can both ping sites, wget sites, use skype but when using a browser the page never loads (in Firefox the status bar just sits there saying "Connecting" until it times out.) Here is what we have tried so far (nothing has fixed this issue): OpenDNS Restart networking services Using wired connection rather than wireless Removing all other nodes from the network except the two machines that have this issue Swapped out the router Factory reset the router Reformatted one of the machines and re-installed Ubuntu 10.10 Other things that we have checked: The two machines can connect simultaneously without any issues to other wireless networks in different locations (say in an Internet Cafe or another office) The two machines have unique IP addresses The two machines have unique MAC addresses The two machines can communicate on the network using Skype, wget, ping etc We are not using a proxy on either machine FYI: I have attached output from wireshark. For the test we turned both machines on and pointed them both to the same website. The content loaded on one and not the other. Here is the output from wireshark- (speedyshare.com/files/26228631/machine_output_1 && speedyshare.com/files/26228649/machine2). As you can see the first one worked, the second one didn't. I don't fully understand the output and would appreciate if someone could shed some light on what might be causing this and how we can fix it! Many thanks! Darren

  Read the article

• Oracle Error ORA-12560 TNS:Protocol Adapter error?

  - by David Basarab

  I am using Oracle Database 10g. Both Servers are Windows 2003. I have an Orcale Database set up on one server. Here is the TNSNames.ora from the server with the database. # tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora # Generated by Oracle configuration tools. ORCL.VIRTUALHOLD.COM = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = databaseServer)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl) ) ) The Environmental Variables on the Server are ORACLE_HOME = C:\oracle\product\10.2.0\db_1 ORACLE_SID = orcl I am trying to connect to it from another box that has Oracle Client installed. Here is the tnsnames.ora installed on the other client server. # tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\client_1\network\admin\tnsnames.ora # Generated by Oracle configuration tools. ORCL = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = databaseServer)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = orcl) ) ) ORACLE_HOME = C:\oracle\product\10.2.0\client_1 ORACLE_SID = orcl Locally on the database server I can connect to through sqlplus with no issues. On the client machine I keep getting the error: ORA-12560: TNS:protocol adapter error What am I missing? Does the client TNSNames.ora need to be different?

  Read the article

• XCOPY access denied error on My Documents folder

  - by Ryan M.

  Here's the situation. We have a file server set up at \fileserver\ that has a folder for every user at \fileserver\users\first.last I'm running an xcopy command to backup the My Documents folder from their computer to their personal folder. The command I'm running is: xcopy "C:\Users\%username%\My Documents\*" "\\fileserver\users\%username%\My Documents" /D /E /O /Y /I I've been silently running this script at login without the users knowing, just so I can get it to work before telling them what it does. After I discovered it wasn't working, I manually ran the batch script that executes the xcopy command on one of their computers and get an access denied error. I then logged into a test account on my own computer and got the same error. I checked all the permissions for the share and security and they're set to how I want them. I can manually browse to that folder and create new files. I can drag and drop items into the \fileserver\users\first.last location and it works great. So I try something else to try and find the source of the access denied problem. I ran an xcopy command to copy the My Documents folder to a different location on the same machine and I still got the access denied error! So xcopy seems to be denied access when it tries to copy the My Documents folder. Any suggestions on how I can get this working? Anyone know the reason behind the access denied error?

  Read the article

• Ubuntu 10.04->10.10 in failed state - how to recover?

  - by Harvey

  I was running Ubuntu 10.04 and attempted to upgrade to 10.10. I have a really slow connection (DSL 128kbits/sec) and copying the upgrade files took about 26 hours. I of course let it run unattended. When I came back, I notice the following 3 dlgs: (1) "Could not install the upgrades The upgrade has aborted. Your system could be in an unusable state. A recovery will run now (dpkg -- configure -a)." (2) "gpk-update-icon Distribution upgrades available maverick 10.10 (stable) [more information] [Do no show this again] [Cancel] [Ok]" (3) "gpk-update-icon Security updates available The following important updates are available for your computer: libwebkit-1.0-2-dbg - Web content engine library for Gtk+ - Debugging symbols libcupsimage2 - Common UNIX Printing System(tm) - Raster image library ..." What is the best response to all of this? I went through something similar in an attempted network upgrade from 8.04 to 10.04 and had to reload the unbootable machine fresh from distribution media (all data was lost). I'd like to avoid that here. I have not yet responded to the dialogs, and want to make sure the system is still bootable and not lose my data this time.

  Read the article

• Bad Mumble control channel performance in KVM guest

  - by aef

  I'm running a Mumble server (Murmur) on a Debian Wheezy Beta 4 KVM guest which runs on a Debian Wheezy Beta 4 KVM hypervisor. The guest machines are attached to a bridge device on the hypervisor system through Virtio network interfaces. The Hypervisor is attached to a 100Mbit/s uplink and does IP-routing between the guest machines and the remaining Internet. In this setup we're experiencing a clearly recognizable lag between double-clicking a channel in the client and the channel joining action happening. This happens with a lot of different clients between 1.2.3 and 1.2.4 on Linux and Windows systems. Voice quality and latency seems to be completely unaffected by this. Most of the times the client's information dialog states a 16ms latency for both the voice and control channel. The deviation for the control channels mostly is a lot higher than the one of the voice channels. In some situations the control channel is displayed with a 100ms ping and about 1000 deviation. It seems the TCP performance is a problem here. We had no problems on an earlier setup which was in principle quite like the new one. We used Debian Lenny based Xen hypervisor and a soft-virtualised guest machine instead and an earlier version of the Mumble 1.2.3 series. The current murmurd --version says: 1.2.3-349-g315b5f5-2.1

  Read the article

• Can't install xclip on Ubuntu 10.10

  - by wildster

  I'm trying to load an SSH key to Github from a new machine and this command is not working: sudo apt-get install xclip Reading package lists... Done Building dependency tree Reading state information... Done Package xclip is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package xclip has no installation candidate when I try: sudo aptitude install xclip Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done No candidate version found for xclip No candidate version found for xclip The following partially installed packages will be configured: synaptics-dkms 0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 0B will be used. Writing extended state information... Done Setting up synaptics-dkms (1.1.1) ... Loading new synaptics-1.1.1 DKMS files... Error! Cannot locate /usr/src/synaptics-1.1.1.dkms.tar.gz. File does not exist. dpkg: error processing synaptics-dkms (--configure): subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: synaptics-dkms E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up synaptics-dkms (1.1.1) ... Loading new synaptics-1.1.1 DKMS files... Error! Cannot locate /usr/src/synaptics-1.1.1.dkms.tar.gz. File does not exist. dpkg: error processing synaptics-dkms (--configure): subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: synaptics-dkms Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done Any idea how I can install this? Mucho thanks in advance

  Read the article

• How to get Synergy working on Ubuntu 11.10 and Windows 7?

  - by Linda

  I'm using Ubuntu 11.10 32-bit and Windows 7 64-bit, however, Synergy only works when a window (application or folder) is open and touching the edge of the screen where the mouse should "jump". In other words, if a window is open and maximized, Synergy works normally. Without any windows, the mouse does not jump to the other screen. My steps: (Ubuntu) apt-get install -y quicksynergy (Windows) Install Synergy (I've tried both 1.3.8 and 1.4.8 and both 32 and 64-bit) On Ubuntu 11.10 32-bit (Synergy Server config): ~/.quicksynergy/synergy.conf section: screens myubuntu: mywin7: end section: links myubuntu: right = mywin7 mywin7: left = myubuntu end On Ubuntu 11.10 32-bit: $ /usr/bin/synergys -f --config .quicksynergy/synergy.conf ... 2012-04-25T14:04:12 NOTE: client "mywin7" has connected /build/buildd/synergy-1.3.6/lib/server/CServer.cpp,287 (output hangs here) On Windows 7 64-bit: Synergy 1.3.8 Client on Microsoft Windows 7 x86 (WOW64) started client connecting to 'myubuntu': ###.###.###.###:24800 connected to server (output hangs here) At this point, things should work, but my mouse still can't change screens unless a window is maximized on my Ubuntu machine. Everything is running on port 24800. No firewall on Ubuntu. Firewall port 24800 open on Windows 7. This was previously working on Ubuntu 10.10 and Windows 7 (so only Ubuntu has been upgraded). I'm open to using either 32 or 64-bit on either server or client side, but I just want to get it working on Ubuntu 11.10 and Windows 7! I'm also using Ubuntu Classic (no effects), and not Unity.

  Read the article

• Why does a document in Word 2007 stop recognizing the mouse after the document loses focus?

  - by alt234

  When I open a document in Word 2007, everything works fine, I can edit, highlight text, etc. However, the instant Word loses focus, when I focus back the document doesn't recognize anything the mouse does. The tabbed menu at the top seems to recognize the mouse but the document itself does not. I can scroll through via the scroll-wheel and I can type. However, typing just shows up where the mouse cursor last was before focus was taken away. I've tried clearing some word data registry keys. I've also found that some Word Add-ins can cause problems. LaserFiche is one I see mentioned a lot. As far as I can tell I have no add-ons though. Any ideas? It's crazy-annoying. UPDATE- - Word is the only program that has this problem - Typically I have Toad (Oracle DB management app), an XP virtual machine with various apps running on it, Skype, Google Talk, and maybe a handful of other programs at any given time open... Windows Media player, Outlook. - Yes, this happens even if nothing else is running. From a fresh restart as well. - I'm running Vista 64 with SP1 - According to Windows Update, I have the latest of everything. This has been happening for a couple of months now. Just never took the time to look into because I usually never have to use word.

  Read the article

• How to have a shell script available everywhere I SSH to

  - by aib

  I have a shell script which I simply cannot do without: bar from Theiling Online I use SSH a lot and on a variety of *nix servers. However, I am not a system administrator and usually don't have the time or privileges to install it on every server I connect to. It is apparently a very portable sh script and has command line options to export itself as a shell function, which got me thinking: Could I use one of OpenSSH's subjectively obscure features to export it everywhere I go? My first thought was to assign the source to an environment variable like BAR = "cat -v" and then execute it on the other side as `$BAR`, but 1) I can't even get the cat example to to work locally, 2) I don't know how to put the script's actual multiline source into an environment variable and 3) I have yet to see a machine with PermitUserEnvironment enabled. I guess I could even do with an ssh option to write a file called ~/bar at logon, but a more volatile solution would be better. Calling wget http://.../bar at logon would be unacceptable. Any ideas? P.S. Putty-specific solutions, though I doubt any would exist, are also fine.

  Read the article

• VMM 2012 Adding Hosts in Trusted Forest

  - by Steve Evans

  I have two forests with a two way trust between them. VMM 2012 sits in ForestA and I can discover hosts in ForestA with no issue. When I try to discover hosts in ForestB I hit one of two issues: If I go through the GUI or use Powershell just like I normally do I get the following error on the job: Error (10407) Virtual Machine Manager could not query Active Directory Domain Services. Recommended Action Verify that the domain name and the credentials, if provided, are correct and then try the operation again. It doesn't matter which account I use. I've tried accounts from both forests, with Admin/Domain Admin permissions all over the place, etc Going through the GUI (can't find the switch in Powershell to duplicate this), I check the box "Skip AD Verification" and it causes the GUI to crash during discovery. I found an article (http://technet.microsoft.com/en-us/library/gg610641.aspx) that describes how to add a host in a disjoint namespace (even though that doesn't apply to me) and it says that VMM creates an SPN if one does not exist. So I verified that the correct SPN's exist in ForestB, that did not help the issue. I have a case open with PSS but they are stuck. I have VMM traces if anyone would like to see them. Any suggestions or ideas?

  Read the article

• Webcam becomes "Unknown Device" after Windows Messenger 2011 is installed

  - by Boris

  I have Sony VAIO VGN-NS290J laptop. I installed Windows 7 Ultimate 64-bit. I was able to find drivers for all hardware without any problems. Recently, I installed Microsoft Windows Live Essentials 2011, i.e. Windows Live Messenger 2011. Ever since that application is running on my computer, my webcam is not recognized by the OS any more. It is listed as the "Unknown Device" and placed in the Universal Serial Bus controllers group in the Device Manager. There don't seem to be any drivers for this webcam. It's a standard Sony Motion Eye web camera and Sony does not offer any drivers for it. There is one application to download that utilizes the camera, but there are no drivers (and the system is showing the same behavior regardless of the presence of the application). It happens from time to time that the webcam becomes recognized by the OS again, after a couple of restarts; but not always. Then it becomes unknown again. I am absolutely positive that this issue is caused by the Windows Live Messenger 2011, because same symptoms caused the same effects before. I wish to be able to continue to use this software, but also to use my webcam. I was wondering if anyone had a similar issue and if there is a way to fix it. Thanks for all the help, I appreciate it. Update: I have discovered a pattern - if the camera goes astray, restarting the machine does not bring it back; but switching the computer off and turning it back on does. Every time! This is getting super complicated :)

  Read the article

• How do I remove encryption from a VMware Workstation 7 image?

  - by Chad

  I successfully encrypted a VM image and confirmed it still runs. I then closed the VM and reopened it and confirmed the encryption password was valid and worked. However, now I want to un-encrypt the VM. When I choose that option, it asks for "your password". I assume this means the password I created when I encrypted it. It doesn't work. I can still open the VM with the password and run it. But, it refuses to remove the encryption using that password. Am I missing something? Is there a password that I don't know about? Some details: I created this image (using standalone converter; physical machine source) I converted it to ACE Converted back to a normal VM (un-ACE'd it) Encrypted it Cannot remove the encryption but can open it and run it As you can see... I am exploring the VMware features. Thanks for any guidance you can give.

  Read the article

• Delayed internet access

  - by Joel Coel

  When I (and presumably my users) first start up or log in to my computer I can't get internet access until several minutes after logging in. Internet pages like serverfault.com will time out. During this time I can access internal web servers. Sometimes pinging the gateway seems to fix the problem. I'm using Windows 7 on this machine with wifi, and the problem seems limited to the wifi network, which is on a separate vlan. The wired network does not share the problem, but I know it's not the wifi connection itself because the internal sites work. The wifi access point is attached to a 3Com 4200 switch, with the port set for vlan 2 untagged, vlan 1 tagged. The 4200 has a fiber connection to a 3Com 4900SX fiber switch that acts almost as a router here. The fiber connection is vlan 1 untagged vlan 2 tagged at both ends. The gateway is then attached to a different 4200 (vlan 1 untagged, vlan 2 tagged) that has a similar fiber connection to the 4900SX. vlan 2 has 192.168.8.0/22 IPs, vlan 1 has 10.1.0.0/16 IPs. The 4900SX has an interface for both vlans (10.1.1.1/192.168.8.1), as does the gateway (10.1.1.5/192.168.8.5). There is one dchp server for both vlans on the same switch as the gateway. It chooses a dhcp scope based on the interface used by the 4900sx to forward the dhcp request. There is also a network access list on the 4900sx set to deny all vlan2 traffic to any 10.1.x.x host, with exceptions made for a few servers, including dhcp, 4900sx, and the gateway. I think that about covers it. Any ideas on why internet access would be delayed like this?

  Read the article

• Installing a .deb file manually?

  - by stef

  apt-get install gitosis --fix-missing on my Linode still leads to a 404 (Failed to fetch http://ftp.debian.org/debian/pool/main/g/gitosis/gitosis_0.2+20080825-2_all.deb 404 Not Found [IP: 130.89.148.12 80] ) . The correct file location seems to be http://ftp.debian.org/debian/pool/main/g/gitosis/gitosis_0.2+20090917-11_all.deb Is there any way I can install this without apt-get, or point apt-get in the right direction somehow? Several other packages on my Debian Linode also point to 404, both from command line and virtualmin. EDIT: Machine details Debian 5.0 64bit (Latest 2.6 (2.6.39.1-x86_64-linode19)) EDIT2 My sources list # main repo deb http://ftp.debian.org/debian/ lenny main contrib non-free deb-src http://ftp.debian.org/debian/ lenny main contrib non-free deb http://security.debian.org/ lenny/updates main contrib non-free deb-src http://security.debian.org/ lenny/updates main contrib non-free deb http://volatile.debian.org/debian-volatile lenny/volatile main contrib non-free deb-src http://volatile.debian.org/debian-volatile lenny/volatile main contrib non-free # contrib & non-free repos #deb http://ftp.debian.org/debian/ lenny contrib non-free #deb-src http://ftp.debian.org/debian/ lenny contrib non-free #deb http://security.debian.org/debian/ lenny/updates contrib non-free #deb-src http://security.debian.org/debian/ lenny/updates contrib non-free deb http://software.virtualmin.com/gpl/debian/ virtualmin-lenny main deb http://software.virtualmin.com/gpl/debian/ virtualmin-universal main

  Read the article

• Installing and running two postgresql versions on different ports (or two instances of same server)

  - by Andrius

  I have postgresql 9.1 installed on my machine (Ubuntu). I need another postgresql server that would run next to the old one. Exact version does not matter, but I'm thinking of using 9.2 version. How could I properly install and run another postgresql version without screwing old one (like upgrading). So those versions would run independently on different ports. Old one on 5432 and new one on 5433 for example. The reason I need this is for two OpenERP versions databases. If I run two OpenERP servers (with different versions) on single postgresql port, it crashes because new OpenERP version detects old versions database and tries to run it, but it crashes because it uses another schemes. P.S or maybe I could just run same postgresql server on two ports? Update So far I tried this: /usr/lib/postgresql/9.1/bin/pg_ctl initdb -D main2 It created new cluster. I changed port to 5433 in new clusters directory postgresql.conf file. Then ran this: /usr/lib/postgresql/9.1/bin/pg_ctl -D main2 -l logfile start I got response server starting. But when I tried to enter new cluster's template database with: psql template1 -p 5433 I got this error: psql: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5433"? Also now when I try to stop server with: /usr/lib/postgresql/9.1/bin/pg_ctl -D main2 -l logfile start I get this error: pg_ctl: PID file "main2/postmaster.pid" does not exist Is server running? So I don't understand if server is running and what I'm missing here? Update Found what was wrong. Stupid me. I didn't notice that when I changed port in .conf file, that line was commented already. So actually I didn't change anything first time, but thought I did and it used default 5432 port.

  Read the article

• Outlook 2010 on WinXP runs once then refuses to run again until reboot

  - by msorens

  Since I installed Outlook 2010 on a new machine (WinXP Pro SP3) a couple months back I have had an issue that is quite annoying: If I close Outlook then attempt to restart it I get a small pop-up saying only: "Cannot start Microsoft Outlook". I found one workaround, but not a terribly practical one: reboot. If I reboot then launch Outlook, it opens fine. Here is what I know: Since I can run Outlook just fine after a reboot, I do not see that a system restore, an OS reinstall, or the like would help. I tried "outlook.exe /resetnavpane" and "outlook.exe /safe" but those give the same error. There are no entries in the event log. There is no instance of Outlook appearing in the process list once I close the program, so it does not seem to be an alias for "outlook is already running". As far as I have found, my situation is unique among reports of similar incidents: I have uncovered no other reports saying Outlook would run fine the first launch or that a reboot would again allow it to run. Suggestions?

  Read the article

• Wake on LAN Problem

  - by Caley Woods

  I'm working to get wake on lan (wol) working so that we can do some power management at my workplace. I've enabled WOL on a test laptop running Win 7 x64 and put it to sleep and hibernate both with no luck. I'm using a 3rd party utility and I've ran wireshark on the test laptop with it booted up and I can see the WOL packets coming in and the machine refuses to wake from sleep or hibernate. I thought maybe it was the computer I was using so I had another Win 7 x64 laptop nearby and I tried it, same scenario. We're in a cisco environment and I believe I gotten all the pieces in place since I'm seeing the WOL packets come through. I've tested two machines on the same subnet to eliminate the possibility of a misconfiguration on the switch, this also has the same behavior. The laptop models are a Compaq 6510b and 6730b. Is there something I'm missing? I'm trying this across UDP port 50200 since that's the port the actual management system will use after I get it working.

  Read the article

• SVN hangs on commit - any suggestions for troubleshooting?

  - by Richard Beier

  We're having a problem with SVN... Subversion clients such as TortoiseSVN hang when we commit any more than a few files at a time to our server. Everything appears to actually be committed successfully to the repository; but the client hangs after all the data has been transmitted. We're using version 1.4.4 of the SVN server. We use the svn:// protocol rather than http to connect. We've reproduced this problem with several clients: TortoiseSVN (1.6.10), AnkhSVN (2.1), and the Silk command-line client (1.6.12). This is happening for everyone on the team, though some people seem to be more affected than others. If someone commits only a few files, it often works; but with more than half a dozen files, it usually hangs. Does anyone have troubleshooting suggestions? This has been happening sporadically for a while, but it's become pretty consistent lately. We've been working around the issue by killing the hung SVN client, doing "svn cleanup", and then doing "svn up"; but sometimes that causes tree conflicts. Another workaround is to blow away the workspace and check it out again after every commit; but of course that's pretty annoying. Are there any diagnostics that could help us troubleshoot this? We're considering upgrading to SVN 1.6 server, and installing the server on a new machine; but we're wondering if there's an easier solution. Thanks for your help, Richard

  Read the article

• NTBackup (on WS2k3) fails to backup remote server (WS2k8R2) with " Error: is not a valid drive, or you do not have access."

  - by Mark A

  We run an NTBackup job on a Windows Server 2003 R2 SP2 with all updates (as of Q4-2011). It works well backing up two WS2k3 servers as well as the backup server itself. However, we have been unable to successfully back up our Windows Server 2008 R2 machine ("G5-01"). It often runs for about 2GB worth of backup and then dies out with one of the below error messages. It should be more like 20GB for the full server. We have tried using the admin share (C$), an explicitly shared drive share, UNC and mapped drives. The result is the same each time, the only thing that varies is the amount of stuff backed up before it chokes. We've also run NTBbackup from the UI interface, from the command line and as a scheduled task. We are backing up to 400/800GB tapes and they have plenty of space available on them (blank media). Error: \\G5-01\c is not a valid drive, or you do not have access. Error: \\G5-01\c$ is not a valid drive, or you do not have access. Error: Y: is not a valid drive, or you do not have access. Error: Could not access or create backup catalog files. Verify that you have full access to the working folder and there is disk space available. The job is run as Administrator and we have no problems logging onto the server and transferring files. The Event Log on the WS2k8 is not much help, as it has success audits for each login. All of the hardware involved (HP DL360 G3, HP LTO Ultrium 3, Adaptec 39320A) has the latest supported drivers. We've seemingly tried a bunch of different options but are wondering where to look next to resolve the backup issue. We've been super happy with our reliable schedule task for years but this one is stumping us!

  Read the article

• Certificates required for WHQL-certified drivers

  - by Kasius

  The 64-bit Windows 7 image that we deploy to machines at our site does not contain all of the certificates included on a default Windows image. Automatic root certificate installation is also disabled per policy from higher in the organization. We have had a lot of trouble installing many WHQL-certified drivers from reputable companies (ex. HP, Lexmark, Dell, etc.), and I hypothesize that a required certificate is missing from one of the certificate stores on the machine. The error we typically get is: The driver cannot be installed because it is either not digitally signed or not signed in the appropriate manner. I know that it is signed. A .CAT file is included, and it has the following tree from top to bottom: Microsoft Root Authority (thumbprint a4 34 89 15 9a 52 0f 0d 93 d0 32 cc af 37 e7 fe 20 a8 b4 19) Microsoft Windows Hardware Compatibility PCA (thumbprint 93 b8 d8 82 0a 32 db 20 a5 ea b6 8d 86 ad 67 8e fa 14 ea 41) Microsoft Windows Hardware Compatibility Publisher (thumprint b0 50 45 45 42 4e be 2c 16 2f 62 5b bf 5a e6 9b 96 bf 0b 0b) What certificates are required to install WHQL-certified drivers? Is it possibly something other than certificates? Thanks! NOTE: I have posted this question on Technet as well, but honestly, I've never had a lot of luck posting questions on the Technet forums.

  Read the article

• Metacity/Compiz not staring upon Login Ubuntu 10.10

  - by Ryan Lanciaux

  TLDR: As of this afternoon, I do not have a window manager when I login to Ubuntu 10.10. I would like to have window manager on login without needing to add to startup. Just started using linux again as my home OS. (Used it for a long time years ago but been on windows up until this past weekend) so this may be kind of n00b-ish :) Anyways, up until today, everything on my machine was running okay. I did not have compiz running as the default wm because I'm running NVidia Drivers and Xinerama (and as I understand Xinerama & Compiz don't work well together). I made no changes to my xorg / etc but today when I logged in, I had to manually start metacity from command line to get any window manager. Really not sure what would be causing this or what I can do to get it working again. My xorg.conf is available here: https://gist.github.com/845618. My default Window Manager is set to /usr/bin/metacity in Configuration Editor under /desktop/gnome/applications/window_manager. p.s. Any tips on how to run 3 monitors where I can move windows between screens without Xinerama would be appreciated but that's prolly for another thread :)

  Read the article

< Previous Page | 635 636 637 638 639 640 641 642 643 644 645 646  | Next Page >