Search Results

Search found 2570 results on 103 pages for 'alek sys'.

Page 64/103 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

• How to find the /dev name of my USB device

  - by mustafa

  I am running Ubuntu 11 on VmWare on Windows XP. I want to format an SD card in Ubuntu. But, I can't figure out which /dev/xxx device the SD card is. I plug the card into the built-in socket of my laptop. I "safely remove" the device in Windows. Then, I "connect" the PCMCIA reader in VmWare. Now, I was supposing to see a new device like /dev/sdx. But, it doesn't appear :( How can I find what the name of my USB device's name and mount it? /var/log/message is empty. Here is the output of dmesg: [ 5268.927308] usb 2-1: new full speed USB device number 12 using uhci_hcd And, here is the last lines of /var/log/syslog: Oct 31 18:51:21 ubuntu kernel: [ 5268.927308] usb 2-1: new full speed USB device number 12 using uhci_hcd Oct 31 18:51:21 ubuntu mtp-probe: checking bus 2, device 12: "/sys/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1" Oct 31 18:51:21 ubuntu mtp-probe: bus: 2, device: 12 was not an MTP device

  Read the article

• SQL server peformance, virtual memory usage

  - by user45641

  Hello, I have a very large DB used mostly for analytics. The performance overall is very sluggish. I just noticed that when running the query below, the amount of virtual memory used greatly exceeds the amount of physical memory available. Currently, physical memory is 10GB (10238 MB) whereas the virtual memory returns significantly more - 8388607 MB. That seems really wrong, but I'm at a bit of a loss on how to proceed. USE [master]; GO select cpu_count , hyperthread_ratio , physical_memory_in_bytes / 1048576 as 'mem_MB' , virtual_memory_in_bytes / 1048576 as 'virtual_mem_MB' , max_workers_count , os_error_mode , os_priority_class from sys.dm_os_sys_info

  Read the article

• Debian date jumping, causing complete lockup

  - by artfulrobot

  I have a Debian Squeeze VM that has suddenly chosen to jump it's date forwards just over a month, which seems to confuse it no end and cause it to require a hard reset (yikes!). There is nothing unusual in the logs, except that the datestamp suddenly jumps (today back to 2005). It's happened three times, so I don't think it's to do with the leap second issue as the last one of those was in July. When it happened once I spent ages checking stuff but could not find anything, decided to forget it. But three times is becoming an issue on a production server. Edits providing information requested in comments (thanks!): I do not have control over the hypervisor, it is a hired VM. # cat /sys/devices/system/clocksource/clocksource0/current_clocksource kvm-clock # ntpq -p remote refid st t when poll reach delay offset jitter ============================================================================== +grendel.exizten 130.149.17.8 2 u 29 64 77 14.811 1.778 1.744 *panoramix.linoc 193.67.79.202 2 u 32 64 77 19.729 -0.419 1.691 +robert.elnounch 213.251.128.249 2 u 27 64 77 17.762 0.600 1.722 -janetzki.eu 83.169.43.165 3 u 31 64 77 27.214 3.575 1.638

  Read the article

• Difference between tcp recv buffer and tcp receive window size?

  - by pradeepchhetri

  The command shows the tcp receive buffer size in bytes. $ cat /proc/sys/net/ipv4/tcp_rmem 4096 87380 4001344 where the three values signifies the min, default and max values respectively. Then I tried to find the tcp window size using tcpdump command. $ sudo tcpdump -n -i eth0 'tcp[tcpflags] & (tcp-syn|tcp-ack) == tcp-syn and port 80 and host google.com' tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 16:15:41.465037 IP 172.16.31.141.51614 > 74.125.236.73.80: Flags [S], seq 3661804272, win 14600, options [mss 1460,sackOK,TS val 4452053 ecr 0,nop,wscale 6], length 0 I got the window size to be 14600 which is 10 times the size of MSS. Can anyone please tell me the relationship between the two.

  Read the article

• OpenVPN to connect remote networks, peer to peer instead of client/server possible?

  - by John Robertson

  I would like to connect two remote networks using OpenVPN. I am very new to this we are very small and don't have a sys/network admin. What are the possible setups to have both networks both live on a common LAN via OpenVPN? I would prefer to use the UDP peer model rather than client/server. Is there a way to set that up instead? I can't see how because no computer on existing network A has a routable address to any computer on existing network B and vice versa.

  Read the article

• VMware Workstation on Linux: Dropping core files in a shared folder...

  - by kclittle

  I'm using VMware 6.0.2 on a RHEL 4.6 host. The VMs are MontaVista CGE 5.0 (2.6.21 kernel). I'm trying to get applications running in the VMs to drop any core files on a HGFS volume, i.e. in a "shared folder". The core files get created as per the path and format given in /proc/sys/kernel/core_pattern, but they are always zero length. If I change the path to a local path (on a virtual disk in the VM), all is well. Any ideas what I have to do get the core files written into a shared folder? Thanks for your help!

  Read the article

• Robocopy hiding folders on backup drives

  - by Neil Barnwell

  I have a backup batch file that uses Robocopy to backup my files: robocopy "C:\" "G:\Default\RoboCopyBackup\C" /XF Pagefile.sys /XD "System Volume Information" "Recycler" "Temporary Internet Files" "Installer Cache" "Temp" /E /R:1 /W:0 /TEE /XJ This should create a folder structure on the external backup drive like so: G:\Default\RoboCopyBackup\C\... However, G: appears totally empty. What is weird, is that the folders and files are there! If I type the above path into the address bar, I see all the files and folders! Can anyone help me work out why? I think it might be some NTFS-based ownership/permissions thing but I'm not sure.

  Read the article

• Issues with FTP on my server

  - by homestead

  I installed FTP on my windows 2003 box I created a FTP site on a ipaddress, I am not allowing anonymous access. I created a user that has access to the folder c:\ftptest connecting to my server using filezilla shows: connectiong to -0.0.0.0 connection established, waiting for welcome message could not connect to server I tried both active and passive modes. The port on the server is open i.e. TCP 21 I can connect to other FTP sites so my locla firewall isnt' the issue. (now I know why sys admin work is so fun!)

  Read the article

• How do I add color syntax highlighting to GNU emacs?

  - by Alex Reynolds

  I have two versions of emacs available to me on a locked workstation: $ /usr/local/bin/emacs --version GNU Emacs 22.3.1 $ /usr/bin/emacs --version GNU Emacs 21.4.1 In both cases, my terminal type is xterm when I run either version of emacs. When I run the v21 version of emacs, I get syntax coloring for Perl, HTML, and other modes. When I run the v22 version, I do not get syntax coloring. I would like to migrate from the v21 version because the combination of v21 emacs, GNOME Terminal and GNU Screen is eating Ctrl-arrow key chords, which prevents me from moving quickly between words. (OS X Terminal and GNU Screen do not have this issue.) The v22 version allows use of Ctrl-arrow key combinations with GNOME Terminal and GNU Screen. How do I fix the v22 version (or ask my sys admin to fix) so that it once again highlights syntax and allows me to use Ctrl-arrow key combinations?

  Read the article

• Listing the routing table takes long time to complete

  - by Rafal Rawicki

  When I print routes defined on my computer using route, it takes about 5 to 20 seconds to complete. Why does it take so much time? With VPN enabled: $ time sudo route Kernel IP routing table (...) real 0m21.423s user 0m0.000s sys 0m0.012s With no VPN, this is about 5 seconds - still, computer can do a lot in this time. I've repeated my measurements few times, getting very similar results each try. My machine is Ubuntu with 3.0.0 kernel, but as far as I know, route on the other computers works the same way.

  Read the article

• Fortigate 200A firewall CPU high resource usage

  - by user119720

  This morning I'm receiving complaints from several end users that saying their whole department network are slow and have intermittent. Therefore I've checked our firewall to see whether if something goes wrong with the device.From my observation in the FortiGate dashboard status, the CPU resources is very high (99 percent). My first assumption is to clear the log since in the alert log the Fortigate log mention that it is already 90% full.Based on my understanding,the log can be cleared by restarting the firewall. After restarting the firewall the network seems okay again but then after several minutes it went up again.The condition still persist until now. Can someone show me where else I can check to fix this issue? I've really appreciate any help that I can get here.Thanks. Edit: diag sys top command

  Read the article

• Munin "Available entropy" when using address space layout randomization

  - by clawspoon

  Having just configured munin for statistics logging on my gentoo server (hardened profile), I am noticing that my "Available entropy" is consitently in the 200-300 range. This seems way to low, so I checked it manually using the command $ cat /proc/sys/kernel/random/entropy_avail 3544 Odd. Consistently very low values in Munin and practically filled up when checking manually. After thinking about the problem for a while I came to the conclusion that the problem is probably that I'm using Adress Space Layout Randomization which is using the entropy when running commands/programs. Since Munin runs a whole slew of programs all the entropy is used up, and Munin then measures how much entropy there is, resulting in the low values. Does anyone have any experience with this? How can this be avoided?

  Read the article

• Colored blocks on boot

  - by stackzerad

  When my laptop tries to boot right after POST I see colored blocks with flashing symbols in them. I am able to boot from windows PE cd. Tried fixboot and fixmbr with no success. I have also tried replacing boot files (ntldr, io.sys etc..) and removing video card drivers from windows\system32\drivers. The drive is seagate 2.5 ATA 160GB and has one NTFS partition on it. I have already fixed this issue by reformating the drive and reinstalling everything but after couple of weeks I get the same issue again. The diagnostics software shows no bad sectors on it and virus scan didn't find anything. Does anybody have an idea what this might be? UPDATE: tried defragmenting the hard drive just in case, but still no luck

  Read the article

• IIS 6 on x64 and long URLs

  - by mausch

  I have a very long URL on a site hosted on Windows 2003 x64 that looks like this: http://myhost/a_very_very_long_url_around_300_chars_long (i.e. a single, very long segment around 300 chars long) Problem is, I'm getting a 400 Bad Request response from HTTP.SYS (it doesn't even reach IIS). I can tell because these requests show up in system32\LogFiles\HTTPERR, e.g: 2009-09-17 19:51:29 200.123.179.9 3636 192.168.129.50 80 HTTP/1.1 GET /a_very_very_long_url_around_300_chars_long 400 - URL - I tried setting UrlSegmentMaxLength in the registry and this fixes the issue on my Windows 2003 x86 box but not on the x64 production server. I tried this on another Win2k3 x64 server and it also failed. Any hints?

  Read the article

• Clear / Flush cached memory

  - by TheDave

  I have a small VPS with 6GB RAM hosting a couple of websites. Recently I have noticed that my cached memory size is quite high - see below: Cpu(s): 0.1%us, 0.1%sy, 0.0%ni, 99.1%id, 0.0%wa, 0.2%hi, 0.4%si, 0.0%st Mem: 6113256k total, 5949620k used, 163636k free, 398584k buffers Swap: 1048564k total, 104k used, 1048460k free, 3586468k cached After investigating if there is some method to have this flushed or cleared I stumbled upon a command which is: sync; echo 3 > /proc/sys/vm/drop_caches I read it could be useful to add this to a chron-task/job. Is this method recommended or could this lead to potential problems? The only concern I have is that I use one Magento installation on Memcached - could this have any negative effects on it? I am certainly not a pro therefore I would very much appreciate some expert advise. PS: My VPS runs on CentOS 5 x64 and I have WHM + NGINX installed.

  Read the article

• update ocz vertex le capacity via firmware update

  - by Ben Voigt

  I have an OCZ Vertex LE 100GB drive. It's actually 128GiB of NAND flash, with a whopping 28%+ reserved for write combining. Most 128GiB drives are actually ~ 115GB usable (and marketed as 120GB or 128GB). There were rumors that the reserved fraction could be decreased on OCZ 100GB drives. Can anyone provide a link to firmware that does that, or an official statement that no such firmware exists? (NB: I recently installed the 1.24 firmware from the OCZ site, it didn't affect the capacity. Possibly because the rumors say the capacity change is destructive to existing content.) Of possible interest: flashing firmware was more of a pain than it should have been -- the tool didn't detect the disk until I booted an older Windows install off a secondary hard disk, I suspect the Intel SATA driver is the issue and tool only works with the msachi.sys driver.

  Read the article

• Laptop windows 7 power settings - screen display goes black after 1 minute

  - by Puneet Dudeja

  My laptop windows 7 power settings are not working since last week, i have tried using "Dim display after 5 hours" and "Dim Never" also, but my screen goes black after 1 minute. Any resolutions ? My laptop model is : Compaq Pressario CQ62 Graphics Card Information: Name Intel(R) HD Graphics PNP Device ID PCI\VEN_8086&DEV_0046&SUBSYS_1425103C&REV_02\3&11583659&0&10 Adapter Type Intel(R) HD Graphics (Core i3), Intel Corporation compatible Adapter Description Intel(R) HD Graphics Adapter RAM 1.21 GB (1,303,306,240 bytes) Installed Drivers igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32 Driver Version 8.15.10.2119 INF File oem17.inf (iILKM0 section) Color Planes Not Available Color Table Entries 4294967296 Resolution 1366 x 768 x 59 hertz Bits/Pixel 32 Memory Address 0xD0000000-0xD03FFFFF Memory Address 0xC0000000-0xCFFFFFFF I/O Port 0x00004050-0x00004057 IRQ Channel IRQ 4294967294 I/O Port 0x000003B0-0x000003BB I/O Port 0x000003C0-0x000003DF Memory Address 0xA0000-0xBFFFF Driver c:\windows\system32\drivers\igdkmd64.sys (8.15.10.2119, 9.85 MB (10,326,784 bytes), 4/21/2010 6:18 PM) I am not able to solve my problem from any of the answers till now. The screen still goes dark and password screen appears after 1 minute of idle time.

  Read the article

• No command window.

  - by Segref

  Using 7 build 7600. Wen I try to open a command window, I just get returned to my previous folder/desktop. If I try to open an extended window I get to the UAC, answer yes and again am returned. A check in Sys info reveals the command prompt is running but I can't see the window. I can have multiple instances of cmd.exe running but still no window. My video adapter is GeForce 7600 and I have no other known problems at this time. Thanks in advance.

  Read the article

• How to stop OS X from switching input method (keyboard layout) automatically?

  - by adolf garlic

  After using the wireless keyboard that comes with the iMac, I have switched to a MS Ergo Natural 4000 one. Surprisingly I had to install extra software as OS X could not work out which keyboard I had. After which I went into sys prefs and set the main input method to be "British - Microsoft" first and "Swiss German" second (what the wireless keyboard is), on the "input sources" tab: However... OS X keeps resetting my input method back to Swiss German which is driving me bananas. I have the flag thingy top right so I can see when this changes. N.B. I have "input source options" set to "use the same one in all documents" which I am assuming means keep the language the same for anything running. It also flips back on the login page. Does anyone know how to fix this?

  Read the article

• Windows 2008 Domain Controller - Backup (BDC) to Primary (PDC)

  - by Klaptrap

  I have created a new domain controller with my single domain forest. I have also made it DHCP and DNS ready - all 3 services have synchronised with the existing W2K8 domain controller. I even migrated the FSMO roles and thought everything was fine. Indeed all machines on network appear to obtain DHCP and DNS from new server and the AD is working on the new server as my internal website uses it for login authentication. I have just noticed, via BgInfo - Sys Internals - that the new server is showing as "backup" and the old as "primary" - I thought I had already achieved this. Have the FSMO roles swapped back - as I have yet to have removed the old server from AD (dcpromo). Do I need to do anything before I run dcpromo on the old server? Any thoughts appreciated....

  Read the article

• set tap0 using virt-manager for bridged wireless

  - by DaveO

  After 3 days I finally have kvm guests working on the network via wireless (link below - thanks!): My network is 192.168.1.0/24 on the host: sudo sh -c "echo 1 > /proc/sys/net/ipv4/ip_forward" sudo tunctl -t tap0 sudo ip link set tap0 up sudo ip addr add 192.168.1.25/24 dev tap0 sudo route add -host 192.168.1.30 dev tap0 sudo parprouted wlan0 tap0 on the guest: auto eth0 iface eth0 inet static address 192.168.1.30 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.25 and start the guest: sudo kvm /path/to/guest.img -net nic,macaddr=DE:AD:BE:EF:90:26 -net tap,ifname=tap0,script=no This works great and I can ping the local network and the internet back and forth between the guest. But how do I add these settings to the guest's xml config so I can start the guest via virt-manager with the same nic settings? ref: http://www.linuxquestions.org/questions/debian-26/kvm-wireless-bridge-network-691953/

  Read the article

• Security when, ssh Private keys are lost

  - by Shree Mandadi

  Cant explain my problem enough with words, Let me take an example.. and please multiple the complexity by a 100 for the Solution. User-A has two ssh private keys, and over time has used this public key on a number of servers He lost one of them, and has created a new pair. How does User-A, inform me (Sys Admin), that he has lost his key, and How do I manage all the servers to which he had access to (I do not have a list, of all Servers that User-A has access to). In other words, How do I recall, the public key associated with this Private key. REF: In the LDAP based Authentication, All Servers would communicate with a single Server repository for Authentication, and If I remove acess or modify the password on the Server, all Systems that use this LDAP for Authentication are secured, when User-A loses his password..

  Read the article

• Robocopy hiding folders on backup drives

  - by Neil Barnwell

  I have a backup batch file that uses Robocopy to backup my files: robocopy "C:\" "G:\Default\RoboCopyBackup\C" /XF Pagefile.sys /XD "System Volume Information" "Recycler" "Temporary Internet Files" "Installer Cache" "Temp" /E /R:1 /W:0 /TEE /XJ This should create a folder structure on the external backup drive like so: G:\Default\RoboCopyBackup\C\... However, G: appears totally empty. What is weird, is that the folders and files are there! If I type the above path into the address bar, I see all the files and folders! Can anyone help me work out why? I think it might be some NTFS-based ownership/permissions thing but I'm not sure.

  Read the article

• Killing CLOSE_WAIT sockets without killing parent process on Linux

  - by Alex Neth

  Tomcat is leaving me with CLOSE_WAIT sockets which ultimately saturate the maximum number of connections. I've tried many methods in my client and server code to get rid of these to no avail, including closing connections, calling System.gc(), etc. Now I'm trying to find a way to simply time these out quickly in the OS. I've got conntrack working, but am not sure how to use that to kill these connections. I've also set /proc/sys/net/ipv4/netfilter/ip_conntrack_tcp_timeout_close_wait to 1, which of course is too low but the connections persist. Is there a way to kill these zombie sockets? Running Ubuntu.

  Read the article

• ata error: UnrecovData Handshk

  - by Aaron Digulla

  I just saw this message in my log (openSUSE 11.3, Linux 2.6.36.2): ata6.00: exception Emask 0x10 SAct 0x1 SErr 0x400100 action 0x6 frozen ata6.00: irq_stat 0x08000000, interface fatal error ata6: SError: { UnrecovData Handshk } ata6.00: failed command: WRITE FPDMA QUEUED ata6.00: cmd 61/58:00:9f:69:00/00:00:00:00:00/40 tag 0 ncq 45056 out res 40/00:04:9f:69:00/00:00:00:00:00/40 Emask 0x10 (ATA bus error) ata6.00: status: { DRDY } ata6: hard resetting link ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata6.00: configured for UDMA/133 ata6: EH complete Two questions: Which disk caused the error? I search /sys and /proc but couldn't find a way to map ata6 to a device (/dev/sdaXY) When such an error happens, does Linux retry the disk operation? Or do I have a corrupt filesystem?

  Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >