Search Results

Search found 15487 results on 620 pages for 'android wireless'.

Page 64/620 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

• Wireless card on HP laptop not working

  - by D. Strout

  I just bought an HP Envy m6-1125dx online from Best Buy. When I got it home and started it up, the wireless card did not work well - at all. I could connect, but any real usage would cause the connection to start dropping every 30 seconds or so, and it would be really slow. Taking another look at the reviews on the Best Buy site, it seems only a few others had this problem, so I took it to my local Best Buy and exchanged it for another unit. Got it home again and the card had the same issues. Which leads to my dilemma. First: does this model have several different cards that it could come with? Mine is a Ralink RT5390R (on both units I received). If it does, then I can keep exchanging until I get a unit with a different card. I wouldn't ask this, except it seems weird that only a few people mentioned this issue, so I thought that might be one possibility. I looked in to replacing the card with a different one myself, but it seems that HP blocks certain wireless cards. However, some people reported success in replacing the card, and this site said it was only an issue on "older HP computer[s]". Can anyone confirm this? Finally, if that fails/will not work, does anyone know what I can get through Best Buy? I am concerned that they will not put any different card than the Ralink, and after two of those, I don't want that. Can I ask Best Buy support to use a different card? Can they even get another card from HP? I guess the base question is: should I attempt to replace the card myself (two days via Amazon to get a new card), should I try to get the laptop repaired through Best Buy (two - four weeks), should I go for a different model laptop from Best Buy, or should I try a different unit of the same model (three's the charm?).

  Read the article

• How to connect Android phone to a Wifi network using PPPoE?

  - by Slavo

  I have an ISP at home, which provides me with a PPPoE connection. My router supports that and I've configured it to autoconnect periodically, so I don't have to type my username and password each time. When I connect to the Wireless router from the PC, I have internet and everything works fine. However, when I do so using my Android phone, there's no internet connection on the phone. It connects to the router, but I cannot open any web page. How can I enable internet access from such an ISP on my phone? Is it something in the router setup? The router is Linksys WRT54GL.

  Read the article

• Extending a home wireless network using two routers running tomato

  - by jalperin

  I have two Asus RT-N16 routers each flashed with Tomato (actually Tomato USB). UPSTAIRS: Router 'A' (located upstairs) is connected to the internet via the WAN port and connected via a LAN port to a 10/100/1000 switch (Switch A). Several desktops are also attached to Switch A. Router A uses IP 192.168.1.1. DOWNSTAIRS: I've just acquired Router 'B' and set it to IP 192.168.1.2. I have a cable running from Switch A downstairs to another switch (Switch B). Tivo, a blu-ray player and a Mac are connected to Switch B. My plan was to connect Router B to Switch B so that I have improved wireless access downstairs. (The wireless signal from Router A gets weak downstairs in a number of locations.) How should I configure Router B so that all devices in the house can see and talk to one another? I know that I need to change DHCP on Router B so that it doesn't cover the same range as DHCP on Router A. Should I be using WDS on the two routers, or is that unnecessary since I already have a wired connection between the two routers? Any other thoughts or suggestions? Thanks! --Jeff

  Read the article

• Wireless card overheating?

  - by Sidney

  Ok, so I've had my laptop for several years (I wanna say 4, but possibly more), it's a Toshiba Satellite. I'm running Linux mint 15, and am having a strange new issue, after several hours of running my wireless stops. It can SEE wireless networks, but refuses to connect to any of them. (On a sidenote, connecting to a router with a cable at this point works fine) The fact that it can SEE the networks make me think the card is in good condition, and it's software related The fact that it works for several hours before booting me makes me think perhaps the transmitter is getting too hot. I don't use my laptop in dusty environments, and keep it on an elevated surface (alternatively, I actively try not to let it sit on soft surfaces where the vents get covered). I spray out the cpu fan about once a year with compressed air about once a year, so I really don't think the insides should be too dirty. Finally, unfortunately, sensors only gives me CPU temps, but they run about 40-50 degrees C, which from my understanding is perfectly normal for an I3. Does anyone have any suggestions on what I can do to determine the root cause of this?

  Read the article

• How to turn a DSL wireless modem to a wifi hub

  - by my_question

  I used to use DSL for my home internet and used Qwest Q1000 wireless modem. Now I switched to cable and use wireless router to cover the home. One problem is I just bought a desktop and I like to put it in a place far away from the router. The desktop only has cable interface, it does not receive wifi. The obvious solution is I go buy that little USB dongle which can receive wifi and plug it to the desktop. But before doig that, I am wondering if somehow I can re-use the Q1000 modem. The modem has 4 LAN ports and it has wifi antenna. I tried connecting the desktop to Q1000's LAN port, the system shows wire connection is in place, but I cannot access internet. It seems to me Q1000's wifi function is to broadcast the wifi signal out instead of receiving signal. I went to the Q1000 configuration page by going to web page of "192.168.0.1", it is not clear how to set it up. I also wonder one thing, my home wifi is encrypted, so if I want to let Q1000 to join the wifi, I need to somehow type in the password, I am not sure how to do that either. Anyway, maybe this thing cannot be used in this fashion. If you have any suggestion, please shed some light. Thanks.

  Read the article

• Can't connect to WCF service on Android

  - by illvm

  I am trying to connect to a .NET WCF service in Android using kSOAP2 (v 2.1.2), but I keep getting a fatal exception whenever I try to make the service call. I'm having a bit of difficulty tracking down the error and can't seem to figure out why it's happening. The code I am using is below: package org.example.android; import org.ksoap2.SoapEnvelope; import org.ksoap2.serialization.PropertyInfo; import org.ksoap2.serialization.SoapObject; import org.ksoap2.serialization.SoapSerializationEnvelope; import org.ksoap2.transport.HttpTransport; import android.app.Activity; import android.app.AlertDialog; import android.content.DialogInterface; import android.content.Intent; import android.os.Bundle; public class ValidateUser extends Activity { private static final String SOAP_ACTION = "http://tempuri.org/mobile/ValidateUser"; private static final String METHOD_NAME = "ValidateUser"; private static final String NAMESPACE = "http://tempuri.org/mobile/"; private static final String URL = "http://192.168.1.2:8002/WebService.Mobile.svc"; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.validate_user); Intent intent = getIntent(); Bundle extras = intent.getExtras(); if (extras == null) { this.finish(); } String username = extras.getString("username"); String password = extras.getString("password"); Boolean validUser = false; try { SoapObject request = new SoapObject(NAMESPACE, METHOD_NAME); PropertyInfo uName = new PropertyInfo(); uName.name = "userName"; PropertyInfo pWord = new PropertyInfo(); pWord.name = "passWord"; request.addProperty(uName, username); request.addProperty(pWord, password); SoapSerializationEnvelope envelope = new SoapSerializationEnvelope(SoapEnvelope.VER11); envelope.dotNet = true; envelope.setOutputSoapObject(request); HttpTransport androidHttpTransport = new HttpTransport(URL); androidHttpTransport.call(SOAP_ACTION, envelope); // error occurs here Integer userId = (Integer)envelope.getResponse(); validUser = (userId != 0); } catch (Exception ex) { } } private void exit () { this.finish(); } } EDIT: Remove the old stack traces. In summary, the first problem was the program being unable to open a connection due to missing methods or libraries due to using vanilla kSOAP2 rather than a modified library for Android (kSOAP2-Android). The second issue was a settings issue. In the Manifest I did not add the following setting: <uses-permission android:name="android.permission.INTERNET" /> I am now having an issue with the XMLPullParser which I need to figure out. 12-23 10:58:06.480: ERROR/SOCKETLOG(210): add_recv_stats recv 0 12-23 10:58:06.710: WARN/System.err(210): org.xmlpull.v1.XmlPullParserException: unexpected type (position:END_DOCUMENT null@1:0 in java.io.InputStreamReader@433fb070) 12-23 10:58:06.710: WARN/System.err(210): at org.kxml2.io.KXmlParser.exception(KXmlParser.java:243) 12-23 10:58:06.720: WARN/System.err(210): at org.kxml2.io.KXmlParser.nextTag(KXmlParser.java:1363) 12-23 10:58:06.720: WARN/System.err(210): at org.ksoap2.SoapEnvelope.parse(SoapEnvelope.java:126) 12-23 10:58:06.720: WARN/System.err(210): at org.ksoap2.transport.Transport.parseResponse(Transport.java:63) 12-23 10:58:06.720: WARN/System.err(210): at org.ksoap2.transport.HttpTransportSE.call(HttpTransportSE.java:100) 12-23 10:58:06.730: WARN/System.err(210): at org.example.android.ValidateUser.onCreate(ValidateUser.java:68) 12-23 10:58:06.730: WARN/System.err(210): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1122) 12-23 10:58:06.730: WARN/System.err(210): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2104) 12-23 10:58:06.730: WARN/System.err(210): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2157) 12-23 10:58:06.730: WARN/System.err(210): at android.app.ActivityThread.access$1800(ActivityThread.java:112) 12-23 10:58:06.730: WARN/System.err(210): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1581) 12-23 10:58:06.730: WARN/System.err(210): at android.os.Handler.dispatchMessage(Handler.java:88) 12-23 10:58:06.730: WARN/System.err(210): at android.os.Looper.loop(Looper.java:123) 12-23 10:58:06.730: WARN/System.err(210): at android.app.ActivityThread.main(ActivityThread.java:3739) 12-23 10:58:06.730: WARN/System.err(210): at java.lang.reflect.Method.invokeNative(Native Method) 12-23 10:58:06.730: WARN/System.err(210): at java.lang.reflect.Method.invoke(Method.java:515) 12-23 10:58:06.730: WARN/System.err(210): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:739) 12-23 10:58:06.730: WARN/System.err(210): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:497) 12-23 10:58:06.730: WARN/System.err(210): at dalvik.system.NativeStart.main(Native Method)

  Read the article

• Android "application stopped unexpectedly" - google Hello MapView Tutoria

  - by Cookie

  Hi, I'm trying the Hello MapView Tutorial at the moment. Whe I launch the program in the emulator, I get a huge number of errors (none of the exceptions seems to be related with lines in my code). The emulator window tells the program "stopped unexpectedly". Can anybody tell me which is the key line in the error output? What do I have to change? 05-02 15:04:57.195: ERROR/vold(26): Error opening switch name path '/sys/class/switch/test2' (No such file or directory) 05-02 15:04:57.195: ERROR/vold(26): Error bootstrapping switch '/sys/class/switch/test2' (No such file or directory) 05-02 15:04:57.195: ERROR/vold(26): Error opening switch name path '/sys/class/switch/test' (No such file or directory) 05-02 15:04:57.195: ERROR/vold(26): Error bootstrapping switch '/sys/class/switch/test' (No such file or directory) 05-02 15:05:10.659: ERROR/MemoryHeapBase(51): error opening /dev/pmem: No such file or directory 05-02 15:05:10.659: ERROR/SurfaceFlinger(51): Couldn't open /sys/power/wait_for_fb_sleep or /sys/power/wait_for_fb_wake 05-02 15:05:10.699: ERROR/libEGL(51): couldn't load <libhgl.so> library (Cannot load library: load_library[984]: Library 'libhgl.so' not found) 05-02 15:05:11.403: ERROR/libEGL(62): couldn't load <libhgl.so> library (Cannot load library: load_library[984]: Library 'libhgl.so' not found) 05-02 15:05:14.775: ERROR/BatteryService(51): Could not open '/sys/class/power_supply/usb/online' 05-02 15:05:14.775: ERROR/BatteryService(51): Could not open '/sys/class/power_supply/battery/batt_vol' 05-02 15:05:14.775: ERROR/BatteryService(51): Could not open '/sys/class/power_supply/battery/batt_temp' 05-02 15:05:15.148: ERROR/EventHub(51): could not get driver version for /dev/input/mouse0, Not a typewriter 05-02 15:05:15.148: ERROR/EventHub(51): could not get driver version for /dev/input/mice, Not a typewriter 05-02 15:05:15.282: ERROR/System(51): Failure starting core service 05-02 15:05:15.282: ERROR/System(51): java.lang.SecurityException 05-02 15:05:15.282: ERROR/System(51): at android.os.BinderProxy.transact(Native Method) 05-02 15:05:15.282: ERROR/System(51): at android.os.ServiceManagerProxy.addService(ServiceManagerNative.java:146) 05-02 15:05:15.282: ERROR/System(51): at android.os.ServiceManager.addService(ServiceManager.java:72) 05-02 15:05:15.282: ERROR/System(51): at com.android.server.ServerThread.run(SystemServer.java:162) 05-02 15:05:15.302: ERROR/AndroidRuntime(51): Crash logging skipped, no checkin service 05-02 15:05:17.012: ERROR/LockPatternKeyguardView(51): Failed to bind to GLS while checking for account 05-02 15:05:21.795: ERROR/ActivityThread(100): Failed to find provider info for com.google.settings 05-02 15:05:21.819: ERROR/ActivityThread(100): Failed to find provider info for com.google.settings 05-02 15:05:25.872: ERROR/ApplicationContext(51): Couldn't create directory for SharedPreferences file shared_prefs/wallpaper-hints.xml 05-02 15:05:28.923: ERROR/vold(26): Cannot start volume '/sdcard' (volume is not bound) 05-02 15:05:26.879: ERROR/ActivityThread(97): Failed to find provider info for android.server.checkin 05-02 15:05:30.211: ERROR/ActivityThread(97): Failed to find provider info for android.server.checkin 05-02 15:05:30.430: ERROR/ActivityThread(97): Failed to find provider info for android.server.checkin 05-02 15:05:32.463: ERROR/MediaPlayerService(30): Couldn't open fd for content://settings/system/notification_sound 05-02 15:05:32.489: ERROR/MediaPlayer(51): Unable to to create media player 05-02 15:05:34.783: ERROR/ActivityThread(51): Failed to find provider info for com.google.settings 05-02 15:05:34.783: ERROR/ActivityThread(51): Failed to find provider info for com.google.settings 05-02 15:05:35.359: ERROR/AndroidRuntime(201): Uncaught handler: thread main exiting due to uncaught exception 05-02 15:05:35.395: ERROR/AndroidRuntime(201): java.lang.RuntimeException: Unable to instantiate activity ComponentInfo{org.diretto.client.smartphone.android/org.diretto.client.smartphone.android.ShowMap}: java.lang.ClassNotFoundException: org.diretto.client.smartphone.android.ShowMap in loader dalvik.system.PathClassLoader@4376af90 05-02 15:05:35.395: ERROR/AndroidRuntime(201): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2324) 05-02 15:05:35.395: ERROR/AndroidRuntime(201): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2417) 05-02 15:05:35.395: ERROR/AndroidRuntime(201): at android.app.ActivityThread.access$2100(ActivityThread.java:116) 05-02 15:05:35.395: ERROR/AndroidRuntime(201): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1794) 05-02 15:05:35.395: ERROR/AndroidRuntime(201): at android.os.Handler.dispatchMessage(Handler.java:99) 05-02 15:05:35.395: ERROR/AndroidRuntime(201): at android.os.Looper.loop(Looper.java:123) 05-02 15:05:35.395: ERROR/AndroidRuntime(201): at android.app.ActivityThread.main(ActivityThread.java:4203) 05-02 15:05:35.395: ERROR/AndroidRuntime(201): at java.lang.reflect.Method.invokeNative(Native Method) 05-02 15:05:35.395: ERROR/AndroidRuntime(201): at java.lang.reflect.Method.invoke(Method.java:521) 05-02 15:05:35.395: ERROR/AndroidRuntime(201): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:791) 05-02 15:05:35.395: ERROR/AndroidRuntime(201): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:549) 05-02 15:05:35.395: ERROR/AndroidRuntime(201): at dalvik.system.NativeStart.main(Native Method) 05-02 15:05:35.395: ERROR/AndroidRuntime(201): Caused by: java.lang.ClassNotFoundException: org.diretto.client.smartphone.android.ShowMap in loader dalvik.system.PathClassLoader@4376af90 05-02 15:05:35.395: ERROR/AndroidRuntime(201): at dalvik.system.PathClassLoader.findClass(PathClassLoader.java:243) 05-02 15:05:35.395: ERROR/AndroidRuntime(201): at java.lang.ClassLoader.loadClass(ClassLoader.java:573) 05-02 15:05:35.395: ERROR/AndroidRuntime(201): at java.lang.ClassLoader.loadClass(ClassLoader.java:532) 05-02 15:05:35.395: ERROR/AndroidRuntime(201): at android.app.Instrumentation.newActivity(Instrumentation.java:1097) 05-02 15:05:35.395: ERROR/AndroidRuntime(201): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2316) 05-02 15:05:35.395: ERROR/AndroidRuntime(201): ... 11 more 05-02 15:05:35.527: ERROR/dalvikvm(201): Unable to open stack trace file '/data/anr/traces.txt': Permission denied

  Read the article

• Android TableRow RelativeLayout Issue

  - by phogel

  I have the following <TableRow xmlns:android="http://schemas.android.com/apk/res/android" android:id="@+id/admin_row" android:layout_width="fill_parent" android:layout_height="wrap_content" android:gravity="center_horizontal"> <RelativeLayout android:layout_width="fill_parent" android:layout_height="fill_parent" android:orientation="horizontal" android:background="@color/silver"> I dynamically populate the table but with the relative layout colored silver it only spans about 3/4 of the table row. If I put a LinearLayout with horizontal orientation it spans completely but if I change it to vertical the same problem occurs. I need a relative layout in the table row because I need to something like this: Value Detail MoreDetail. Any ideas on getting the relative layout to span the table row?

  Read the article

• Which Android phone to use for development...?

  - by Nikos

  Hi, I'm planning to port a couple of games from iPhone/Windows Mobile to the Android platform. The games are written in C++ so I plan to use the NDK with a thin java wrapper. I'm new to the Android platform and need some advice on which phone to buy for development. I suspect like Windows Mobile there is a level of fragmentation with different phones supporting different features (keyboard/ rotation/ screen size/ capacitive touch screen/ etc). What are the best device(s) for development on the Android platform...? They also have to be available in the UK/Europe. Thank you in advance. Nikos.

  Read the article

• Configuring WPA WiFi in Ubuntu 10.10

  - by sma

  I am trying to configure my wireless network on my laptop running Ubuntu 10.10 and am having a bit of difficulty. I am a complete Linux newb, but want to learn it, hence the reason I'm trying to set this up. Here's the vitals: It is a Gateway 600 YG2 laptop. It was previously running Windows XP, but I installed Ubuntu 10.10 in place of it (not a dual boot, I removed XP altogether). I have an old wireless card that I'm trying to resurrect. I haven't really used the card in a couple years, but it seems to still work, I just can't connect to my home's wireless network. The card is a Linksys WPC11 v2.5. When I plug it in, Ubuntu recognizes the network, but won't connect to it. My home network uses WPA encryption and the only connection type that Ubuntu's network manager is giving me is WEP and then it asks for a key -- I have no idea what that key should be. So, basically, I'm asking, is there a way I can instead connect through WPA? I've tried creating a new connection in network manager, but that won't work, it keeps falling back to the WEP connection and asking me for a key. I have tried to install the XP driver using ndiswrapper but I don't know if that's working or not. Is there a way to tell if: A) the card is working as it should B) the correct drivers are installed (again, I installed the XP one using ndiswrapper NET8180.INF, but I'm not sure what to do next) Any help would be appreciated. Thank you.

  Read the article

• wsimport and Android or any other ProxyGenerator for android?

  - by Shoaib Shaikh

  I am currently developing an Android app i previously developed for IPhone. My Backend is built using WCF service with basichttpEndpoint, i also enabled RESTful methods for better support with other Mobile platforms as well. Now i want to access my existing WCF service(SOAP/REST endpoint) on Android but i need some good ProxyGenerator to consume my services. I just google around for some solution and i found wsimport and wsdl2java(Axis) are two options in java domain. But i am still unable to find any solution related to Android. Can anyone suggest me the best practice in such scenario?

  Read the article

• Android NDK Question

  - by Kyle

  The NDK does not contain very many shared libraries for you to access. As a result, I must build many sources myself and link them into my shared library via static/shared libraries. I want to compile libpng as a Static Library. Trouble is, I have absolutely no idea how, nor does google instruct you how to do so in their NDK. I'm no expert on the NDK even after reading everything I can find, so I would really appreciate someone who actually knows how this is done. I do have the Android.mk file for libpng, as google's Android OS source contains it. Infact, I got the entire directory on the android OS source for libpng and it's dependent libraries. It was somewhat of a shortcut instead of making one myself. I don't know how to make a particular directory which contains this file, though. Thanks for reading!

  Read the article

• Problem setting up HP PhotoSmart C4783

  - by ProfKaos

  I am trying to get several PC's on a network to connect to my client's new wireless printer, the C4783. I initially installed the whole HP 'tsumami of software' the comes with the printer onto my laptop, connected to the printer over USB, and corrected it's networking config. My laptop now also can connect to and print on the printer over the wireless network, as is intended for all PC's. However, when I try and install the HP software on my client's netbook, the HP software cannot find the printer. Firewall was turned off during this time, so doesn't play a role. I tried re-installing all software, but I initially only got a "Repair" or "Uninstall". Choosing Uninstall triggers a lengthy process that ends with a sudden and forceful restart, after which the same "Repair" or "Uninstall" choices are present. Looks like uninstall doesn't. Any suggestions as to how I can begin diagnosing why my laptop has no problem connecting to the printer, but two others do? Wireless is unsecured, and no, nobody has to know where I am right now. :-)

  Read the article

• is it good to have or difference between ADSL Modem+WiFi Router and Separate ADSL Modem & Wi-Fi Router?

  - by vikas devde

  I have ADSL2 Modem which I got from my service provider, now I want to setup wireless(Wi-Fi) in my home. I went to shop, where I came to know that there are routers which come up with modem also but they are priced lil higher than the only wi-fi routers. Now it is obvious that I should go for only wi-fi one, as I already have modem. My question is, is there any difference between ADSL+router and only router? I think if I use ADSL+router, the speed will increase lilbit, as modem does modulate and demodulate signals, and router also generates wireless signal, that is time to take conversions is doubled, and if I use ADSL+modem, it will directly convert the signals to wireless, and time will be saved, so the overall speed will increase lilbit. This is what my concept is(Which might be wrong). What do you guys would suggest me? should I take my current modem away and buy an ADSL+router or I should keep my modem and buy only wi-fi one. Please tell me the difference and suggest me which one I should go with, and also suggest me which company router I should go for.

  Read the article

• Android: Content goes off screen

  - by James

  He is an example of my TextView, which goes off the right side of the screen. I tried setting paddings and stuff, but nothing seemed to work. Any ideas? Here is my hierarchy, ScrollView,TableLayout <TableRow> <TextView android:layout_column="1" android:id="@+id/text_price" android:layout_width="fill_parent" android:layout_height="wrap_content" android:inputType="textCapCharacters" android:padding="2dip" android:text="@string/game_price" /> <EditText android:id="@+id/gameprice" android:inputType="textCapCharacters" android:gravity="right" android:minWidth="120dip" /> </TableRow>

  Read the article

• Android Stream Data Over Wifi?

  - by Neb

  Im trying to make an app for android that will stream the data of the accelerometer to be used as a game controller on my pc over a local wifi connection. Is it possible to make some kind of wifi stream of the accelerometer values in the android app and then make the pc somehow 'read' this stream? Or would it just be better for the pc to make endless calls to the phone getting the newest accelerometer values from a local android server? It would also have to send commands from the phone such as 'button1 pressed', 'button1 released'.

  Read the article

• "Safe" personal router use on apartment-wide network

  - by noisetank

  I recently moved into an apartment with internet included in my rent. This was a boon at first, but now I'm feeling limited. To get devices connected (wired or wireless), I have to whitelist the MAC addresses on mycampusnet.com. This is annoying (considering I'm well over the 10 device limit including my roommate's stuff), but what's really driving me mad is that I don't seem to have any semblance of a "local" network. I've relied heavily on static IPs and port forwarding in the past (accessing NAS and remote desktop) and (as far as I can understand), that functionality is nonexistent without my router set up. Also, as my wired and wireless devices don't always seem to make it onto the same subnet, I'm unable to use any of my iDevices with my Apple TV (I can, however, mirror to no less than four strangers' Apple TVs at any moment, which is a whole other level of discomforting). I've talked to the head of the apartment complex and she told me that they personally don't have any issue with my using a router, but the provider (CampusConnect) does not currently allow it. Apparently, enough people have put in complaints/requests about the restriction (the apartments are for graduate students and University staff, many of which need to set up things like VPNs for work reasons) to open up some sort of ticket to get the functionality in place, but all the calls I've made to get status updates have been a waste of time. My question is: If I plugged my router into the apartment network, what would happen? I've been told already that personal routers would "interfere with the wireless" and that they would shut my port down if I used one, but is that a legitimate thing or just something made up that sounds real to keep the average Joe from pushing it further? I'm guessing there's some way of configuring my router to keep it from disrupting the rest of the network, but it's not something they want to tell me for obvious reasons. Am I right? And if so, what are the chances that they'd notice the difference in traffic or whatever and shut off my port?

  Read the article

• google map in android emulator problem

  - by Hiren Dabhi

  Hi, instead of it displaying google map it only display grid view. - i followed all the steps that are in following sites examples http://mobiforge.com/developing/story/using-google-maps-android or http://www.androidpeople.com/android-google-map-application-example/ - i also set the proxy server run -- run configuration.. -- myapplication--target tab-- additional command line -http-proxy http://192.68.100.101:8080/ Still i am not getting the google map. NOTE: i tried this in my mobile it works fine but not display in android emulator. where i made mistake plz help me. thank in advance

  Read the article

• Will a mulitouch touch screen equipped PC allow me to simulate real Android UI's without an Android device ?

  - by Scott Davies

  Hi, I have recently purchased a Samsung Galaxy Tab as an Android 2.x testbed (I am aware that 2.3 might not run on it, but it appears to be a good 1.x - 2.x device with a large enough screen to approximate the variety of screens on different phones). I would wait for Honeycomb equipped devices (such as the Motorola XOOM mentioned at CES 2011), but these are slated for some time in Q1 (likely end of Q1 for the Canadian market). If I get a multitouch capable PC and install the Android SDK and simulator, will I be able to use the multitouch functionality of the PC with the simulator to approximate a real device ? Does anyone use a multitouch touch screen PC for Android development ? I assume that this would work as the PC would recognize my fingers like the mouse, but I'd like to find out before purchasing the PC. Thanks for your help, Scott

  Read the article

• Android x86 porting, unable to make it work

  - by Mr G

  I'm kind of new to the whole porting issue and I got to it because of the slowness in the emulator provided with the Android SDK. I downloaded the android-x86-3.2-RC2-eeepc and android-x86-3.2-RC2-tegav2 ISO-es (from this site) and tried them on the VirtualBox but have no internet connection on the eeepc version and the tegev2 wont event start. I tried the VirtualBoxHowTo but got nothing, on both Windows and Linux platforms. the only thing I managed to understand is that to use this on a VM you need to build it for VM. Can anyone help me on this? P.S.: I need the HoneyComb version (3.2) and the pc I have is a AMD 6 core on and Asus Crosshair Extreme motherboard, Windows 7 or Ubunutu 11.10. (both OS are 64bit)

  Read the article

• Phonegap/Cordova orientation change Android 4

  - by user1477576

  I have a problem changing the orientation of the device (Android 4). In other versions it works fine. Versión of Cordova: cordova-1.8.0.js / cordova-1.8.1.js In Android 4 the app crash or show: "A network error occurred. (file:///android_asset/www/index.html)" I searched a lot about this and no answer solves the problem. In most cases users suggest adding: android:configChanges="orientation|keyboardHidden|screenSize" In other cases: super.setIntegerProperty("loadUrlTimeoutValue",60000); That not work for me :( My manifest activity: <activity android:name=".AppNameActivity" android:label="@string/app_name" android:configChanges="orientation|keyboardHidden|screenSize"> <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> The application should run on Android 2.2 to 4. Thank you very much for the help.

  Read the article

• how can i get proper Uri of a particular contact in android 2.1

  - by Rishabh

  I have written an application and added 2 contacts on emulator, but i am not able to update their names on android 2.1, code is working on android 1.6 platform with the following code. ContentValues contactValues = new ContentValues(); contactValues.put(Contacts.People.NAME, firstName+" "+lastName); getContentResolver().update(UpdateContactUri, contactValues, null, null); In android 1.6 i am getting Uri for those two contacts are "content:// contacts/people/1" and "content://contacts/people/2". but in 2.1 I am getting these values are "content://contacts/people/8" and "content://contacts/people/9" and while updating its giving "java.IllegalArgumentException, Empty values" exception. When i tried to put a static Uri like "content://contacts/people/1", code was debugged sucessfully but contact was not updated. How can i resolve it, why i am not getting uri like 1.6 platform ? Thanks in advance...

  Read the article

• Android Jar libraries

  - by Jeremy Edwards

  How do you setup a project that can result in a jar library file that can be used for android? I want to create a custom library across all projects. Few other questions: Does it need to be compiled against a specific version of android sdk? When an android package is compiled against a jar library does the classes necessary to work with the code get compiled with main code into the apk or does the entire jar get included? Any notable optimizations or pitfalls I need to know about with using a jar instead of integrating the code directly? Does the jar have to be signed like the apk needs to?

  Read the article

• Facebook implementation in android

  - by Sanat Pandey

  I am implementing Facebook in my app through FbRocket jar, but it gives some error as ClassNotFound, but I don't know why bcoz i have alredy added that jar in libraries........ Please help me out. 05-09 19:04:28.933: ERROR/AndroidRuntime(759): FATAL EXCEPTION: main 05-09 19:04:28.933: ERROR/AndroidRuntime(759): java.lang.NoClassDefFoundError: net.xeomax.FBRocket.FBRocket 05-09 19:04:28.933: ERROR/AndroidRuntime(759): at org.shopzilla.android.moretab.SettingActivity.shareFacebook(SettingActivity.java:73) 05-09 19:04:28.933: ERROR/AndroidRuntime(759): at org.shopzilla.android.moretab.SettingActivity$2.onClick(SettingActivity.java:63) 05-09 19:04:28.933: ERROR/AndroidRuntime(759): at android.view.View.performClick(View.java:2485) 05-09 19:04:28.933: ERROR/AndroidRuntime(759): at android.view.View$PerformClick.run(View.java:9080) 05-09 19:04:28.933: ERROR/AndroidRuntime(759): at android.os.Handler.handleCallback(Handler.java:587) 05-09 19:04:28.933: ERROR/AndroidRuntime(759): at android.os.Handler.dispatchMessage(Handler.java:92) 05-09 19:04:28.933: ERROR/AndroidRuntime(759): at android.os.Looper.loop(Looper.java:123) 05-09 19:04:28.933: ERROR/AndroidRuntime(759): at android.app.ActivityThread.main(ActivityThread.java:3683) 05-09 19:04:28.933: ERROR/AndroidRuntime(759): at java.lang.reflect.Method.invokeNative(Native Method) 05-09 19:04:28.933: ERROR/AndroidRuntime(759): at java.lang.reflect.Method.invoke(Method.java:507) 05-09 19:04:28.933: ERROR/AndroidRuntime(759): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:839) 05-09 19:04:28.933: ERROR/AndroidRuntime(759): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:597) 05-09 19:04:28.933: ERROR/AndroidRuntime(759): at dalvik.system.NativeStart.main(Native Method) Code: package org.shopzilla.android.moretab; import java.util.List; import net.xeomax.FBRocket.FBRocket; import net.xeomax.FBRocket.Facebook; import net.xeomax.FBRocket.ServerErrorException; import org.apache.http.NameValuePair; import org.apache.http.client.HttpClient; import org.shopzilla.android.common.R; import org.shopzilla.android.facebook.FacebookActivity; import org.shopzilla.android.facebook.FacebookWebOAuthActivity; import org.shopzilla.android.twitter.TwitterActivity; import org.shopzilla.android.twitter.TwitterWebOAuthActivity; import twitter4j.http.RequestToken; import android.app.Activity; import android.content.Intent; import android.os.Bundle; import android.view.View; import android.widget.Button; import android.widget.TextView; public class SettingActivity extends Activity{ String bytesSent; HttpClient httpclient; int count1; // List with parameters and their values List<NameValuePair> nameValuePairs; TextView mText; Button btn_facebook; Button btn_twitter; FBRocket fbRocket; RequestToken rToken; String oauthVerifier; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.more_setting); Button btn_twitter = (Button)findViewById(R.id.btn_more_setting_twitter); Button btn_facebook = (Button)findViewById(R.id.btn_More_setting_facebook); btn_twitter.setOnClickListener(new View.OnClickListener() { public void onClick(View arg0) { // TODO Auto-generated method stub Intent intent = new Intent(SettingActivity.this,TwitterActivity.class); startActivity(intent); //displayTwitterAuthorization(); } }); btn_facebook.setOnClickListener(new View.OnClickListener() { public void onClick(View v) { // TODO Auto-generated method stub /*Intent intent = new Intent(SettingActivity.this,FacebookActivity.class); startActivity(intent);*/ shareFacebook(); //displayFacebookAuthorization(); //shareFacebook(); } }); } public void shareFacebook() { fbRocket = new FBRocket(SettingActivity.this, "ShopZilla", "172619129456913"); if (fbRocket.existsSavedFacebook()) { fbRocket.loadFacebook(); } else { fbRocket.login(R.layout.facebook); } } public void onLoginFail() { fbRocket.displayToast("Login failed!"); fbRocket.login(R.layout.facebook); } public void onLoginSuccess(Facebook facebook) { // TODO Auto-generated method stub fbRocket.displayToast("Login success!"); try { facebook.setStatus("This is your status"); fbRocket.displayDialog("Status Posted Successfully!! " + facebook.getStatus()); } catch (ServerErrorException e) { if (e.notLoggedIn()) { fbRocket.login(R.layout.facebook); } else { System.out.println(e); } } } }

  Read the article

• Why does the android emulator camera stop unexpectedly?

  - by user490074

  I am using Android 2.2 (API Level 8). The camera is enabled in the manifest. When I try the camera icon provided by the emulator model, it runs for a few seconds showing a gray box moving around a black and white checkerboard, then dies with the error message: Sorry! The application Camera (process com.android.camera) has stopped unexpectedly. Please try again. Trying again, of course, doesn't help. I am using the provided emulator camera to compare behavior with a camera application I am working on. Why does the android emulator camera stop unexpectedly?

  Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >