Search Results

Search found 1839 results on 74 pages for 'comma separated'.

Page 64/74 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

  • Reading a text file, and performing actions based on strings read

    - by user1691766
    Let me start off by saying that I really am quite new to C. So basically I have a text file (contains around 30 assembly instructions, separated by new lines), and I am successfully reading them into my program. From here I need to perform certain actions based off each instruction. I would assume the best way to do this would be via a switch-case statement. However I am encountering a lot of problems due to me trying to compare strings that are 33 characters long. Can anyone please offer me advice on what I am doing wrong, or offer an alternative? Thanks in advance. Here is what I have so far: char instruction[29][ 33 ]; int i,run; i = 0; run = 1; FILE *instPtr; /* LOADING INSTRUCTIONS FROM FILE INTO "instruction" ARRAY*/ if ( ( instPtr = fopen("MIPSinstructions.txt", "r") ) == NULL ) { printf("File could not be opened\n"); } // end if else { fscanf( instPtr, "%s", instruction[0]); printf("%s\n", instruction[0]); while (!feof( instPtr ) ){ i++; fscanf( instPtr, "%s", instruction[i]); printf("%s\n", instruction[i]); } fclose( instPtr ); i = 0; // Reset the counter } //end else return 0; }

    Read the article

  • Globe SSL with NGINX SSL certificate problem, please help

    - by PartySoft
    I have a big problem with installing a certificat for nginx (same happends with apache though) I have 3 files __domain_com.crt __domain_com.ca-bundle and ssl.key. I tried to append cat __domain_com.crt __leechpack_com.ca-bundle bundle.crt but if I do it like this i get an error: [emerg]: SSL_CTX_use_certificate_chain_file("/etc/nginx/__leechpack_com.crt") failed (SSL: error:0906D066:PEM routines:PEM_read_bio:bad end line error:140DC009:SSL routines:SSL_CTX_use_certificate_chain_file:PEM lib) And that's because the delimiters of the certificates arren't separated. ZqTjb+WBJQ== -----END CERTIFICATE----------BEGIN CERTIFICATE----- MIIE6DCCA9CgAwIBAgIQdIYhlpUQySkmKUvMi/gpLDANBgkqhkiG9w0BAQUFADBv If i separate them with an enter between certificated it will at least start but i will get the same warning from Firefox: This Connection is Untrusted You have asked Firefox to connect securely to domain.com, but we can't confirm that your connection is secure. The concatenate solution it is given by Globe SSL and the NGINX site but it doesn't work. I think the bundle is ignored though. http://customer.globessl.com/knowledgebase/55/Certificate-Installation--Nginx.html http://nginx.org/en/docs/http/configuring_https_servers.html#chains%20http://wiki.nginx.org/NginxHttpSslModule if i do openssl s_client -connect down.leechpack.com:443 CONNECTED(00000003) depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=20:unable to get local issuer certificate verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=27:certificate not trusted verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=21:unable to verify the first certificate verify return:1 --- Certificate chain 0 s:/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com i:/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA 1 s:/C=US/O=Globe Hosting, Inc./OU=GlobeSSL DV Certification Authority/CN=GlobeSSL CA i:/C=SE/O=AddTrust AB/OU=AddTrust External TTP Network/CN=AddTrust External CA Root --- Server certificate -----BEGIN CERTIFICATE----- MIIFQzCCBCugAwIBAgIQRnpCmtwX7z7GTla0QktE6DANBgkqhkiG9w0BAQUFADBl MQswCQYDVQQGEwJSTzEuMCwGA1UEChMlR0xPQkUgSE9TVElORyBDRVJUSUZJQ0FU SU9OIEFVVEhPUklUWTEmMCQGA1UEAxMdR0xPQkUgU1NMIERvbWFpbiBWYWxpZGF0 ZWQgQ0EwHhcNMTAwMjExMDAwMDAwWhcNMTEwMjExMjM1OTU5WjCBjTEhMB8GA1UE CxMYRG9tYWluIENvbnRyb2wgVmFsaWRhdGVkMSgwJgYDVQQLEx9Qcm92aWRlZCBi eSBHbG9iZSBIb3N0aW5nLCBJbmMuMSQwIgYDVQQLExtHbG9iZSBTdGFuZGFyZCBX aWxkY2FyZCBTU0wxGDAWBgNVBAMUDyoubGVlY2hwYWNrLmNvbTCCASIwDQYJKoZI hvcNAQEBBQADggEPADCCAQoCggEBAKX7jECMlYEtcvqVWQVUpXNxO/VaHELghqy/ Ml8dOfOXG29ZMZsKUMqS0jXEwd+Bdpm31lBxOALkj8o79hX0tspLMjgtCnreaker 49y62BcjfguXRFAaiseXTNbMer5lDWiHlf1E7uCoTTiczGqBNfl6qSJlpe4rYBtq XxBAiygaNba6Owghuh19+Uj8EICb2pxbJNFfNzU1D9InFdZSVqKHYBem4Cdrtxua W4+YONsfLnnfkRQ6LOLeYExHziTQhSavSv9XaCl9Zqzm5/eWbQqLGRpSJoEPY/0T GqnmeMIq5M35SWZgOVV10j3pOCS8o0zpp7hMJd2R/HwVaPCLjukCAwEAAaOCAcQw ggHAMB8GA1UdIwQYMBaAFB9UlnKtPUDnlln3STFTCWb5DWtyMB0GA1UdDgQWBBT0 8rPIMr7JDa2Xs5he5VXAvMWArjAOBgNVHQ8BAf8EBAMCBaAwDAYDVR0TAQH/BAIw ADAdBgNVHSUEFjAUBggrBgEFBQcDAQYIKwYBBQUHAwIwVQYDVR0gBE4wTDBKBgsr BgEEAbIxAQICGzA7MDkGCCsGAQUFBwIBFi1odHRwOi8vd3d3Lmdsb2Jlc3NsLmNv bS9kb2NzL0dsb2JlU1NMX0NQUy5wZGYwRgYDVR0fBD8wPTA7oDmgN4Y1aHR0cDov L2NybC5nbG9iZXNzbC5jb20vR0xPQkVTU0xEb21haW5WYWxpZGF0ZWRDQS5jcmww dwYIKwYBBQUHAQEEazBpMEEGCCsGAQUFBzAChjVodHRwOi8vY3J0Lmdsb2Jlc3Ns LmNvbS9HTE9CRVNTTERvbWFpblZhbGlkYXRlZENBLmNydDAkBggrBgEFBQcwAYYY aHR0cDovL29jc3AuZ2xvYmVzc2wuY29tMCkGA1UdEQQiMCCCDyoubGVlY2hwYWNr LmNvbYINbGVlY2hwYWNrLmNvbTANBgkqhkiG9w0BAQUFAAOCAQEAB2Y7vQsq065K s+/n6nJ8ZjOKbRSPEiSuFO+P7ovlfq9OLaWRHUtJX0sLntnWY1T9hVPvS5xz/Ffl w9B8g/EVvvfMyOw/5vIyvHq722fAAC1lWU1rV3ww0ng5bgvD20AgOlIaYBvRq8EI 5Dxo2og2T1UjDN44GOSWsw5jetvVQ+SPeNPQLWZJS9pNCzFQ/3QDWNPOvHqEeRcz WkOTCqbOSZYvoSPvZ3APh+1W6nqiyoku/FCv9otSCtXPKtyVa23hBQ+iuxqIM4/R gncnUKASi6KQrWMQiAI5UDCtq1c09uzjw+JaEzAznxEgqftTOmXAJSQGqZGd6HpD ZqTjb+WBJQ== -----END CERTIFICATE----- subject=/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com issuer=/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA --- No client certificate CA names sent --- SSL handshake has read 3313 bytes and written 343 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 5F9C8DC277A372E28A4684BAE5B311533AD30E251369D144A13DECA3078E067F Session-ID-ctx: Master-Key: 9B531A75347E6E7D19D95365C1208F2ED37E4004AA8F71FC614A18937BEE2ED9F82D58925E0B3931492AD3D2AA6EFD3B Key-Arg : None Start Time: 1288618211 Timeout : 300 (sec) Verify return code: 21 (unable to verify the first certificate) ---

    Read the article

  • Multi-Role Domain Controllers for Small Offices (< 50 clients)

    - by kce
    Warning: I'm a Linux/*NIX admin so this is all new to me. I understand that it's not considered a good idea to have only a single domain controller, and that it is also probably a good idea for a domain controller to only do AD/DHCP/DNS (Here). We have two offices, location A with 30 users and location B with 10 users. Our two offices are separated by a WAN that is not particularly robust so I have be instructed that we need to have standalone services in each office. This means that according to "best practices" we will need to build a domain controller and a separate file server in each office. Again, I am not knowledgeable in the ways of Windows but this seems a little unnecessary for an organization of 40 users. People have commented that I could "get away with" running file services on the domain controller as long as the "load is light". That just seems to generate more questions than it answers. What constitutes light load? What are the potential consequences of mixing these roles? Ideally I would prefer to only have one physical machine at each location. The one in location A (the location with IT staff) can act as the primary domain controller and the one in the smaller office can act as the backup domain controller. If either domain controller fails we can still use the other one for authentication (albeit with some latency) and if the WAN connection fails each office still has access to their respective "local" domain controller. If the file services are ALSO run on each server (and synchronized with something like DFS), a similar arrangement in terms of redundancy can be had without having to purchase, build and install two additional separate servers. It's not that I'm adverse to that (well, any more adverse than I am to whole thing to begin with) but to my simple mind it just seems, well a bit overkill. I can definitely see the benefits of functional separation when we're talking larger organizations, but I need to consider the additional overhead too. None of this excludes having a DRP setup for the domain controller/s. I assume you can lose two domain controllers just as easily as one.

    Read the article

  • Globe SSL with NGINX SSL certificate problem, please help

    - by PartySoft
    Hello, I have a big problem with installing a certificat for nginx (same happends with apache though) I have 3 files __domain_com.crt __domain_com.ca-bundle and ssl.key. I tried to append cat __domain_com.crt __leechpack_com.ca-bundle bundle.crt but if I do it like this i get an error: [emerg]: SSL_CTX_use_certificate_chain_file("/etc/nginx/__leechpack_com.crt") failed (SSL: error:0906D066:PEM routines:PEM_read_bio:bad end line error:140DC009:SSL routines:SSL_CTX_use_certificate_chain_file:PEM lib) And that's because the delimiters of the certificates arren't separated. ZqTjb+WBJQ== -----END CERTIFICATE----------BEGIN CERTIFICATE----- MIIE6DCCA9CgAwIBAgIQdIYhlpUQySkmKUvMi/gpLDANBgkqhkiG9w0BAQUFADBv If i separate them with an enter between certificated it will at least start but i will get the same warning from Firefox: This Connection is Untrusted You have asked Firefox to connect securely to domain.com, but we can't confirm that your connection is secure. The concatenate solution it is given by Globe SSL and the NGINX site but it doesn't work. I think the bundle is ignored though. http://customer.globessl.com/knowledgebase/55/Certificate-Installation--Nginx.html http://nginx.org/en/docs/http/configuring_https_servers.html#chains%20http://wiki.nginx.org/NginxHttpSslModule if i do openssl s_client -connect down.leechpack.com:443 CONNECTED(00000003) depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=20:unable to get local issuer certificate verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=27:certificate not trusted verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=21:unable to verify the first certificate verify return:1 --- Certificate chain 0 s:/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com i:/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA 1 s:/C=US/O=Globe Hosting, Inc./OU=GlobeSSL DV Certification Authority/CN=GlobeSSL CA i:/C=SE/O=AddTrust AB/OU=AddTrust External TTP Network/CN=AddTrust External CA Root --- Server certificate -----BEGIN CERTIFICATE----- MIIFQzCCBCugAwIBAgIQRnpCmtwX7z7GTla0QktE6DANBgkqhkiG9w0BAQUFADBl MQswCQYDVQQGEwJSTzEuMCwGA1UEChMlR0xPQkUgSE9TVElORyBDRVJUSUZJQ0FU SU9OIEFVVEhPUklUWTEmMCQGA1UEAxMdR0xPQkUgU1NMIERvbWFpbiBWYWxpZGF0 ZWQgQ0EwHhcNMTAwMjExMDAwMDAwWhcNMTEwMjExMjM1OTU5WjCBjTEhMB8GA1UE CxMYRG9tYWluIENvbnRyb2wgVmFsaWRhdGVkMSgwJgYDVQQLEx9Qcm92aWRlZCBi eSBHbG9iZSBIb3N0aW5nLCBJbmMuMSQwIgYDVQQLExtHbG9iZSBTdGFuZGFyZCBX aWxkY2FyZCBTU0wxGDAWBgNVBAMUDyoubGVlY2hwYWNrLmNvbTCCASIwDQYJKoZI hvcNAQEBBQADggEPADCCAQoCggEBAKX7jECMlYEtcvqVWQVUpXNxO/VaHELghqy/ Ml8dOfOXG29ZMZsKUMqS0jXEwd+Bdpm31lBxOALkj8o79hX0tspLMjgtCnreaker 49y62BcjfguXRFAaiseXTNbMer5lDWiHlf1E7uCoTTiczGqBNfl6qSJlpe4rYBtq XxBAiygaNba6Owghuh19+Uj8EICb2pxbJNFfNzU1D9InFdZSVqKHYBem4Cdrtxua W4+YONsfLnnfkRQ6LOLeYExHziTQhSavSv9XaCl9Zqzm5/eWbQqLGRpSJoEPY/0T GqnmeMIq5M35SWZgOVV10j3pOCS8o0zpp7hMJd2R/HwVaPCLjukCAwEAAaOCAcQw ggHAMB8GA1UdIwQYMBaAFB9UlnKtPUDnlln3STFTCWb5DWtyMB0GA1UdDgQWBBT0 8rPIMr7JDa2Xs5he5VXAvMWArjAOBgNVHQ8BAf8EBAMCBaAwDAYDVR0TAQH/BAIw ADAdBgNVHSUEFjAUBggrBgEFBQcDAQYIKwYBBQUHAwIwVQYDVR0gBE4wTDBKBgsr BgEEAbIxAQICGzA7MDkGCCsGAQUFBwIBFi1odHRwOi8vd3d3Lmdsb2Jlc3NsLmNv bS9kb2NzL0dsb2JlU1NMX0NQUy5wZGYwRgYDVR0fBD8wPTA7oDmgN4Y1aHR0cDov L2NybC5nbG9iZXNzbC5jb20vR0xPQkVTU0xEb21haW5WYWxpZGF0ZWRDQS5jcmww dwYIKwYBBQUHAQEEazBpMEEGCCsGAQUFBzAChjVodHRwOi8vY3J0Lmdsb2Jlc3Ns LmNvbS9HTE9CRVNTTERvbWFpblZhbGlkYXRlZENBLmNydDAkBggrBgEFBQcwAYYY aHR0cDovL29jc3AuZ2xvYmVzc2wuY29tMCkGA1UdEQQiMCCCDyoubGVlY2hwYWNr LmNvbYINbGVlY2hwYWNrLmNvbTANBgkqhkiG9w0BAQUFAAOCAQEAB2Y7vQsq065K s+/n6nJ8ZjOKbRSPEiSuFO+P7ovlfq9OLaWRHUtJX0sLntnWY1T9hVPvS5xz/Ffl w9B8g/EVvvfMyOw/5vIyvHq722fAAC1lWU1rV3ww0ng5bgvD20AgOlIaYBvRq8EI 5Dxo2og2T1UjDN44GOSWsw5jetvVQ+SPeNPQLWZJS9pNCzFQ/3QDWNPOvHqEeRcz WkOTCqbOSZYvoSPvZ3APh+1W6nqiyoku/FCv9otSCtXPKtyVa23hBQ+iuxqIM4/R gncnUKASi6KQrWMQiAI5UDCtq1c09uzjw+JaEzAznxEgqftTOmXAJSQGqZGd6HpD ZqTjb+WBJQ== -----END CERTIFICATE----- subject=/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com issuer=/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA --- No client certificate CA names sent --- SSL handshake has read 3313 bytes and written 343 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 5F9C8DC277A372E28A4684BAE5B311533AD30E251369D144A13DECA3078E067F Session-ID-ctx: Master-Key: 9B531A75347E6E7D19D95365C1208F2ED37E4004AA8F71FC614A18937BEE2ED9F82D58925E0B3931492AD3D2AA6EFD3B Key-Arg : None Start Time: 1288618211 Timeout : 300 (sec) Verify return code: 21 (unable to verify the first certificate) ---

    Read the article

  • How can I connect DLNA devices through NAT?

    - by Bob
    I have a Windows 7 PC running Serviio as a DLNA server. I have a Samsung I9100G running Skifta as a DLNA renderer (client). My network topology: At the moment, I can connect and watch my videos fine if the phone is on router #2. The server is on a wired network with #2. Router #1 is 192.168.1.1, router #2 is 192.168.2.1 (192.168.1.2) and router #3 is 192.168.3.1 (192.168.1.3). In other words, each router has its own subnet, using NAT - their "modem" port is connected with a "LAN" port on the modem/router 1. What I want to do is be able to connect to the DLNA server if the renderer is connected to router #1/#3 - #1 is on the WAN side of #2, while #3 is even further separated. I'll settle for just #1 working, though. Normally, I would just forward the appropriate ports, and everything would work fine. However, (apparently) DLNA uses UPnP, which I am unfamiliar with. I tried enabling UPnP on router #2, but that did not seem not change anything. It's a Belkin F5D7230-4 6000 - there's reported issues with UPnP on F5D7230-4 7000. UPnP is already enabled on router #1 - a Billion BiPAC 7700N. I've also tried the built in DLNA renderer/server/controller on my phone, Samsung AllShare. It can see the server on router #2 and browse files, but has issues playing or downloading them. It also can't see the server on the other two networks. I'm currently using Skifta/s "local" mode. "Remote" mode requires an account, which I don't really want to create if not necessary. Is it possible too do what I'm trying to do? If no, are there workarounds? If yes, how do I do it? Is my server the issue? The renderer (client)? The router(s)? My method? I can change just about anything except the routers.

    Read the article

  • PHP-FPM Pool, Child Processes and Memory Consumption

    - by Jhilke Dai
    In my PHP-FPM configuration I have 3 Pools, the eg: Config is: ;;;;;;;;;;;;;;;;;;;;;;; ; Pool 1 ; ;;;;;;;;;;;;;;;;;;;;;;; [www1] user = www group = www listen = /tmp/php-fpm1.sock; listen.backlog = -1 listen.owner = www listen.group = www listen.mode = 0666 pm = dynamic pm.max_children = 40 pm.start_servers = 6 pm.min_spare_servers = 6 pm.max_spare_servers = 12 pm.max_requests = 250 slowlog = /var/log/php/$pool.log.slow request_slowlog_timeout = 5s request_terminate_timeout = 120s rlimit_files = 131072 ;;;;;;;;;;;;;;;;;;;;;;; ; Pool 2 ; ;;;;;;;;;;;;;;;;;;;;;;; [www2] user = www group = www listen = /tmp/php-fpm2.sock; listen.backlog = -1 listen.owner = www listen.group = www listen.mode = 0666 pm = dynamic pm.max_children = 40 pm.start_servers = 6 pm.min_spare_servers = 6 pm.max_spare_servers = 12 pm.max_requests = 250 slowlog = /var/log/php/$pool.log.slow request_slowlog_timeout = 5s request_terminate_timeout = 120s rlimit_files = 131072 ;;;;;;;;;;;;;;;;;;;;;;; ; Pool 3 ; ;;;;;;;;;;;;;;;;;;;;;;; [www3] user = www group = www listen = /tmp/php-fpm3.sock; listen.backlog = -1 listen.owner = www listen.group = www listen.mode = 0666 pm = dynamic pm.max_children = 40 pm.start_servers = 6 pm.min_spare_servers = 6 pm.max_spare_servers = 12 pm.max_requests = 250 slowlog = /var/log/php/$pool.log.slow request_slowlog_timeout = 5s request_terminate_timeout = 120s rlimit_files = 131072 I calculated the pm.max_children processes according to some example calculations on the web like 40 x 40 Mb = 1600 Mb. I have separated 4 GB of RAM for PHP, now according to the calculations 40 Child Processes via one socket, and I have total of 3 sockets in my Nginx and FPM configuration. My doubt is about the amount of memory consumption by those child processes. I tried to create high load in the server via httperf hog and siege but I could not calculate the accurate memory usage by all the PHP processes (other processes like MySQL and Nginx were also running). And all the sockets were in use, So, I seek guidance from anyone who have done this before or know how exactly the pm.max_children in PHP Works. Since I have 3 Pools/sockets with 40 child processes does that count to 3 x 40 x 40 Mb of Memory usage ? or it is just like 40 Max. Child processes sharing 3 sockets (and the total memory usage is just 40 x 40 Mb) ?

    Read the article

  • Looking for personal scheduling software / todo list with rather particular requirements

    - by Cthulhu
    I've been scouring the web for a couple of (my boss') hours, looking for a piece of software that can organize my tasks in two ways. First, I have a list of bullet points / todo items I can do at any given time. Think of stuff like solve issue X, ask X about Y, write documentation about Z, etcetera. Second, I have a number of running projects I'd like to organize better, as in schedule for a certain part of a day of the week. Ideally (I think), my day would be organized as 50% spent on projects and 50% on the other small things. Now, I don't like most calendar applications (such as Outlook & friends), their UI is too 'official', not really easy to move stuff around (in my experience). I don't like most todo lists either, too static and things. I like new, fast and hip software. I've looked at GTD versions of Tiddlywiki, and I like mGSD for one particular feature. You can make lists of tasks and basically give them one of three statusses - Now (nothing required, you can do it right away), Waiting (you need someone or something before you can work on this), or the most gratifying of all, Done. I like that feature because it's a simple todo list, but indicates more accurately the things you can do right now and the things you depend on someone else for to do. Anyways, that's just a small aspect of that program - most of the other things in there I can't find a particularly good use for. If there's something like that (maybe something that works even snappier, cleaner UI), combined with an easy to use bit of scheduling software (optionally separated into two applications, but preferrably not), I think I'd like that. (Besides something like that, I also use several instances of Trac to monitor tasks and bugs and things for the various clients and projects I have to serve, and TaskCoach to monitor the amount of time I spend on each task / each client. An easy / low-maintenance time tracking software would be neat too) Of course, the software has to be free to use. I don't like shareware, trials, limited software and the like. I could develop my own too, but I'm lazy like that and there's a dozen other projects I'd like to do in my free time (neither of which I actually do). Edit: I like David Seah's printable CEO stuff, if something like that (with some video game / instant achievement / gratification) exists in software, it'd be awesome.

    Read the article

  • MySQL performance over a (local) network much slower than I would expect

    - by user15241
    MySQL queries in my production environment are taking much longer than I would expect them too. The site in question is a fairly large Drupal site, with many modules installed. The webserver (Nginx) and database server (mysql) are hosted on separated machines, connected by a 100mbps LAN connection (hosted by Rackspace). I have the exact same site running on my laptop for development. Obviously, on my laptop, the webserver and database server are on the same box. Here are the results of my database query times: Production: Executed 291 queries in 320.33 milliseconds. (homepage) Executed 517 queries in 999.81 milliseconds. (content page) Development: Executed 316 queries in 46.28 milliseconds. (homepage) Executed 586 queries in 79.09 milliseconds. (content page) As can clearly be seen from these results, the time involved with querying the MySQL database is much shorter on my laptop, where the MySQL server is running on the same database as the web server. Why is this?! One factor must be the network latency. On average, a round trip from from the webserver to the database server takes 0.16ms (shown by ping). That must be added to every singe MySQL query. So, taking the content page example above, where there are 517 queries executed. Network latency alone will add 82ms to the total query time. However, that doesn't account for the difference I am seeing (79ms on my laptop vs 999ms on the production boxes). What other factors should I be looking at? I had thought about upgrading the NIC to a gigabit connection, but clearly there is something else involved. I have run the MySQL performance tuning script from http://www.day32.com/MySQL/ and it tells me that my database server is configured well (better than my laptop apparently). The only problem reported is "Of 4394 temp tables, 48% were created on disk". This is true in both environments and in the production environment I have even tried increasing max_heap_table_size and Current tmp_table_size to 1GB, with no change (I think this is because I have some BLOB and TEXT columns).

    Read the article

  • VLAN issues between linux kernels 2.6 / 3.3 in an ESX / Cisco environment

    - by David Griffith
    I shall attempt to explain an issue I have encountered - I have a VM running on esx 4.1 with an interface connected to VLAN800 via an access port on a cisco 3750. It runs linux - kernel 2.6.24, and has about 5 to 10 Mbit of chatter on 10.10.0.0/16 and various multicast addresses to look after. I needed to isolate certain devices from certain other devices on the network, with all of them having to talk to that one VM. No, the address space can't be separated, nor can the networks be easily vlan'd apart. The software on the VM listens to one interface only. Private vlans appear to be the way to go. So as a test, I built a bridge on the VM that globs together the vlans as needed. All good, everything works as expected. But occasionally (sigh) there's some latency that trips up a couple of profinet devices on the network because, you know, you're not really supposed to trunk real-time protocols around the place willy-nilly. I shift it to our test/backup server - works nicely, but I don't want it to be running on the test server as we muck around with that a lot. So I says to myself, "I'll put it on a new VM for testing and tweaking." I download a small linux distro with kernel 3.3, and install as a new VM with a the vlans as separate interfaces for testing. I power up the testing VM - ok. I bring up all the separate interfaces - ok. I can ping the production VM, see all sorts of traffic going past with tshark, etc. I build a bridge and put the primary vlan on it - the production VM running 2.6 immediately loses its multicast traffic - Unicast is fine. (?) I shut down the bridge - still no multicast traffic (!?) I power-cycle the production VM(!?!?) - multicast traffic returns. I trunk everything into the testing VM and create vlan interfaces under linux instead - same result, as soon as I start the bridge.... no multicast on the production VM. Ok, so I take a break and leave things alone. I decide to play with a couple of ubiquiti bullet radios - I'm testing various firmware as a side project. I flash a radio with Open-wrt-12.09. I enable a trunk on a port on a cisco on our network so I can muck around with multiple vlans and SSIDs I power up the radio and connect - ok. I create a vlan interface from the trunk.... the same vlan as the production VM wayyyyy over there, three cisco routers away. Ok. I bridge the vlan interface to the wifi interface and immediately get a phone call. The production VM has (suprise!) lost its multicast traffic. Again, nothing comes back until I power-cycle the VM. What the hell is going on?

    Read the article

  • jqGrid multi-checkbox custom edittype solution

    - by gsiler
    For those of you trying to understand jqGrid custom edit types ... I created a multi-checkbox form element, and thought I'd share. This was built using version 3.6.4. If anyone has a more efficient solution, please pass it on. Within the colModel, the appropriate edit fields look like this: edittype:'custom' editoptions:{ custom_element:MultiCheckElem, custom_value:MultiCheckVal, list:'Check1,Check2,Check3,Check4' } Here are the javascript functions (BTW, It also works – with some modifications – when the list of checkboxes is in a DIV block): //———————————————————— // Description: // MultiCheckElem is the "custom_element" function that builds the custom multiple check box input // element. From what I have gathered, jqGrid calls this the first time the form is launched. After // that, only the "custom_value" function is called. // // The full list of checkboxes is in the jqGrid "editoptions" section "list" tag (in the options // parameter). //———————————————————— function MultiCheckElem( value, options ) { //———- // for each checkbox in the list // build the input element // set the initial "checked" status // endfor //———- var ctl = ''; var ckboxAry = options.list.split(','); for ( var i in ckboxAry ) { var item = ckboxAry[i]; ctl += '<input type="checkbox" '; if ( value.indexOf(item + '|') != -1 ) ctl += 'checked="checked" '; ctl += 'value="' + item + '"> ' + item + '</input><br />&nbsp;'; } ctl = ctl.replace( /<br />&nbsp;$/, '' ); return ctl; } //———————————————————— // Description: // MultiCheckVal is the "custom_value" function for the custom multiple check box input element. It // appears that jqGrid invokes this function the first time the form is submitted and, the rest of // the time, when the form is launched (action = set) and when it is submitted (action = 'get'). //———————————————————— function MultiCheckVal(elem, action, val) { var items = ''; if (action == 'get') // the form has been submitted { //———- // for each input element // if it's checked, add it to the list of items // endfor //———- for (var i in elem) { if (elem[i].tagName == 'INPUT' && elem[i].checked ) items += elem[i].value + ','; } // items contains a comma delimited list that is returned as the result of the element items = items.replace(/,$/, ''); } else // the form is launched { //———- // for each input element // based on the input value, set the checked status // endfor //———- for (var i in elem) { if (elem[i].tagName == 'INPUT') { if (val.indexOf(elem[i].value + '|') == -1) elem[i].checked = false; else elem[i].checked = true; } } // endfor } return items; }

    Read the article

  • jQuery load Google Visualization API with AJAX

    - by Curro
    Hello. There is an issue that I cannot solve, I've been looking a lot in the internet but found nothing. I have this JavaScript that is used to do an Ajax request by PHP. When the request is done, it calls a function that uses the Google Visualization API to draw an annotatedtimeline to present the data. The script works great without AJAX, if I do everything inline it works great, but when I try to do it with AJAX it doesn't work!!! The error that I get is in the declaration of the "data" DataTable, in the Google Chrome Developer Tools I get a Uncaught TypeError: Cannot read property 'DataTable' of undefined. When the script gets to the error, everything on the page is cleared, it just shows a blank page. So I don't know how to make it work. Please help Thanks in advance $(document).ready(function(){ // Get TIER1Tickets $("#divTendency").addClass("loading"); $.ajax({ type: "POST", url: "getTIER1Tickets.php", data: "", success: function(html){ // Succesful, load visualization API and send data google.load('visualization', '1', {'packages': ['annotatedtimeline']}); google.setOnLoadCallback(drawData(html)); } }); }); function drawData(response){ $("#divTendency").removeClass("loading"); // Data comes from PHP like: <CSV ticket count for each day>*<CSV dates for ticket counts>*<total number of days counted> // So it has to be split first by * then by , var dataArray = response.split("*"); var dataTickets = dataArray[0]; var dataDates = dataArray[1]; var dataCount = dataArray[2]; // The comma separation now splits the ticket counts and the dates var dataTicketArray = dataTickets.split(","); var dataDatesArray = dataDates.split(","); // Visualization data var data = new google.visualization.DataTable(); data.addColumn('date', 'Date'); data.addColumn('number', 'Tickets'); data.addRows(dataCount); var dateSplit = new Array(); for(var i = 0 ; i < dataCount ; i++){ // Separating the data because must be entered as "new Date(YYYY,M,D)" dateSplit = dataDatesArray[i].split("-"); data.setValue(i, 0, new Date(dateSplit[2],dateSplit[1],dateSplit[0])); data.setValue(i, 1, parseInt(dataTicketArray[i])); } var annotatedtimeline = new google.visualization.AnnotatedTimeLine(document.getElementById('divTendency')); annotatedtimeline.draw(data, {displayAnnotations: true}); }

    Read the article

  • Python: How to read huge text file into memory

    - by asmaier
    I'm using Python 2.6 on a Mac Mini with 1GB RAM. I want to read in a huge text file $ ls -l links.csv; file links.csv; tail links.csv -rw-r--r-- 1 user user 469904280 30 Nov 22:42 links.csv links.csv: ASCII text, with CRLF line terminators 4757187,59883 4757187,99822 4757187,66546 4757187,638452 4757187,4627959 4757187,312826 4757187,6143 4757187,6141 4757187,3081726 4757187,58197 So each line in the file consists of a tuple of two comma separated integer values. I want to read in the whole file and sort it according to the second column. I know, that I could do the sorting without reading the whole file into memory. But I thought for a file of 500MB I should still be able to do it in memory since I have 1GB available. However when I try to read in the file, Python seems to allocate a lot more memory than is needed by the file on disk. So even with 1GB of RAM I'm not able to read in the 500MB file into memory. My Python code for reading the file and printing some information about the memory consumption is: #!/usr/bin/python # -*- coding: utf-8 -*- import sys infile=open("links.csv", "r") edges=[] count=0 #count the total number of lines in the file for line in infile: count=count+1 total=count print "Total number of lines: ",total infile.seek(0) count=0 for line in infile: edge=tuple(map(int,line.strip().split(","))) edges.append(edge) count=count+1 # for every million lines print memory consumption if count%1000000==0: print "Position: ", edge print "Read ",float(count)/float(total)*100,"%." mem=sys.getsizeof(edges) for edge in edges: mem=mem+sys.getsizeof(edge) for node in edge: mem=mem+sys.getsizeof(node) print "Memory (Bytes): ", mem The output I got was: Total number of lines: 30609720 Position: (9745, 2994) Read 3.26693612356 %. Memory (Bytes): 64348736 Position: (38857, 103574) Read 6.53387224712 %. Memory (Bytes): 128816320 Position: (83609, 63498) Read 9.80080837067 %. Memory (Bytes): 192553000 Position: (139692, 1078610) Read 13.0677444942 %. Memory (Bytes): 257873392 Position: (205067, 153705) Read 16.3346806178 %. Memory (Bytes): 320107588 Position: (283371, 253064) Read 19.6016167413 %. Memory (Bytes): 385448716 Position: (354601, 377328) Read 22.8685528649 %. Memory (Bytes): 448629828 Position: (441109, 3024112) Read 26.1354889885 %. Memory (Bytes): 512208580 Already after reading only 25% of the 500MB file, Python consumes 500MB. So it seem that storing the content of the file as a list of tuples of ints is not very memory efficient. Is there a better way to do it, so that I can read in my 500MB file into my 1GB of memory?

    Read the article

  • SQL Server to PostgreSQL - Migration and design concerns

    - by youwhut
    Currently migrating from SQL Server to PostgreSQL and attempting to improve a couple of key areas on the way: I have an Articles table: CREATE TABLE [dbo].[Articles]( [server_ref] [int] NOT NULL, [article_ref] [int] NOT NULL, [article_title] [varchar](400) NOT NULL, [category_ref] [int] NOT NULL, [size] [bigint] NOT NULL ) Data (comma delimited text files) is dumped on the import server by ~500 (out of ~1000) servers on a daily basis. Importing: Indexes are disabled on the Articles table. For each dumped text file Data is BULK copied to a temporary table. Temporary table is updated. Old data for the server is dropped from the Articles table. Temporary table data is copied to Articles table. Temporary table dropped. Once this process is complete for all servers the indexes are built and the new database is copied to a web server. I am reasonably happy with this process but there is always room for improvement as I strive for a real-time (haha!) system. Is what I am doing correct? The Articles table contains ~500 million records and is expected to grow. Searching across this table is okay but could be better. i.e. SELECT * FROM Articles WHERE server_ref=33 AND article_title LIKE '%criteria%' has been satisfactory but I want to improve the speed of searching. Obviously the "LIKE" is my problem here. Suggestions? SELECT * FROM Articles WHERE article_title LIKE '%criteria%' is horrendous. Partitioning is a feature of SQL Server Enterprise but $$$ which is one of the many exciting prospects of PostgreSQL. What performance hit will be incurred for the import process (drop data, insert data) and building indexes? Will the database grow by a huge amount? The database currently stands at 200 GB and will grow. Copying this across the network is not ideal but it works. I am putting thought into changing the hardware structure of the system. The thought process of having an import server and a web server is so that the import server can do the dirty work (WITHOUT indexes) while the web server (WITH indexes) can present reports. Maybe reducing the system down to one server would work to skip the copying across the network stage. This one server would have two versions of the database: one with the indexes for delivering reports and the other without for importing new data. The databases would swap daily. Thoughts? This is a fantastic system, and believe it or not there is some method to my madness by giving it a big shake up. UPDATE: I am not looking for help with relational databases, but hoping to bounce ideas around with data warehouse experts.

    Read the article

  • gem install of mongrel

    - by atlantis
    I initiated myself into rails development yesterday. I installed ruby 1.9.1 , rubygems and rails. Running 'gem install mongrel' worked fine and ostensibly installed mongrel too. I am slightly puzzled because script/server starts webrick by default 'which mongrel' returns nothing 'locate mongrel' returns lots of entries like . /Developer/SDKs/MacOSX10.5.sdk/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/gems/mongrel-1.0.1 /Developer/SDKs/MacOSX10.5.sdk/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/gems/mongrel-1.0.1/lib /Developer/SDKs/MacOSX10.5.sdk/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/gems/mongrel-1.0.1/lib/mongrel . . . /usr/local/bin/mongrel_rails /usr/local/lib/ruby/gems/1.9.1/cache/mongrel-1.1.5.gem /usr/local/lib/ruby/gems/1.9.1/doc/actionpack-2.3.2/rdoc/files/lib/action_controller/vendor/rack-1_0/rack/handler/evented_mongrel_rb.html /usr/local/lib/ruby/gems/1.9.1/doc/actionpack-2.3.2/rdoc/files/lib/action_controller/vendor/rack-1_0/rack/handler/mongrel_rb.html /usr/local/lib/ruby/gems/1.9.1/doc/actionpack-2.3.2/rdoc/files/lib/action_controller/vendor/rack-1_0/rack/handler/swiftiplied_mongrel_rb.html /usr/local/lib/ruby/gems/1.9.1/gems/actionpack-2.3.2/lib/action_controller/vendor/rack-1.0/rack/handler/evented_mongrel.rb /usr/local/lib/ruby/gems/1.9.1/gems/actionpack-2.3.2/lib/action_controller/vendor/rack-1.0/rack/handler/mongrel.rb /usr/local/lib/ruby/gems/1.9.1/gems/actionpack-2.3.2/lib/action_controller/vendor/rack-1.0/rack/handler/swiftiplied_mongrel.rb /usr/local/lib/ruby/gems/1.9.1/gems/mongrel-1.1.5 . . . Does look like I have mongrel installed (both the default installation and my custom install). So why doesn't which mongrel return something. Also trying to reinstall mongrel using 'gem install mongrel' returns throws its own set of exceptions : Building native extensions. This could take a while... ERROR: Error installing mongrel: ERROR: Failed to build gem native extension. /usr/local/bin/ruby extconf.rb install mongrel checking for main() in -lc... yes creating Makefile make gcc -I. -I/usr/local/include/ruby-1.9.1/i386-darwin9.7.0 -I/usr/local/include/ruby-1.9.1/ruby/backward -I/usr/local/include/ruby-1.9.1 -I. -D_XOPEN_SOURCE -D_DARWIN_C_SOURCE -fno-common -D_XOPEN_SOURCE=1 -O2 -g -Wall -Wno-parentheses -fno-common -pipe -fno-common -o http11.o -c http11.c http11.c: In function 'http_field': http11.c:77: error: 'struct RString' has no member named 'ptr' http11.c:77: error: 'struct RString' has no member named 'len' http11.c:77: warning: left-hand operand of comma expression has no effect http11.c:77: warning: statement with no effect http11.c: In function 'header_done': http11.c:172: error: 'struct RString' has no member named 'ptr' http11.c:174: error: 'struct RString' has no member named 'ptr' http11.c:176: error: 'struct RString' has no member named 'ptr' http11.c:177: error: 'struct RString' has no member named 'len' http11.c: In function 'HttpParser_execute': http11.c:298: error: 'struct RString' has no member named 'ptr' http11.c:299: error: 'struct RString' has no member named 'len' make: *** [http11.o] Error 1

    Read the article

  • `gem install mongrel` fails with ruby 1.9.1

    - by atlantis
    I initiated myself into rails development yesterday. I installed ruby 1.9.1, rubygems and rails. Running gem install mongrel worked fine and ostensibly installed mongrel too. I am slightly puzzled because: script/server starts webrick by default which mongrel returns nothing locate mongrel returns lots of entries like /Developer/SDKs/MacOSX10.5.sdk/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/gems/mongrel-1.0.1 /Developer/SDKs/MacOSX10.5.sdk/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/gems/mongrel-1.0.1/lib /Developer/SDKs/MacOSX10.5.sdk/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/gems/mongrel-1.0.1/lib/mongrel . . . /usr/local/bin/mongrel_rails /usr/local/lib/ruby/gems/1.9.1/cache/mongrel-1.1.5.gem /usr/local/lib/ruby/gems/1.9.1/doc/actionpack-2.3.2/rdoc/files/lib/action_controller/vendor/rack-1_0/rack/handler/evented_mongrel_rb.html /usr/local/lib/ruby/gems/1.9.1/doc/actionpack-2.3.2/rdoc/files/lib/action_controller/vendor/rack-1_0/rack/handler/mongrel_rb.html /usr/local/lib/ruby/gems/1.9.1/doc/actionpack-2.3.2/rdoc/files/lib/action_controller/vendor/rack-1_0/rack/handler/swiftiplied_mongrel_rb.html /usr/local/lib/ruby/gems/1.9.1/gems/actionpack-2.3.2/lib/action_controller/vendor/rack-1.0/rack/handler/evented_mongrel.rb /usr/local/lib/ruby/gems/1.9.1/gems/actionpack-2.3.2/lib/action_controller/vendor/rack-1.0/rack/handler/mongrel.rb /usr/local/lib/ruby/gems/1.9.1/gems/actionpack-2.3.2/lib/action_controller/vendor/rack-1.0/rack/handler/swiftiplied_mongrel.rb /usr/local/lib/ruby/gems/1.9.1/gems/mongrel-1.1.5 . . . Does look like I have mongrel installed (both the default installation and my custom install). So why doesn't which mongrel return something. Also trying to reinstall mongrel using gem install mongrel returns throws its own set of exceptions: Building native extensions. This could take a while... ERROR: Error installing mongrel: ERROR: Failed to build gem native extension. /usr/local/bin/ruby extconf.rb install mongrel checking for main() in -lc... yes creating Makefile make gcc -I. -I/usr/local/include/ruby-1.9.1/i386-darwin9.7.0 -I/usr/local/include/ruby-1.9.1/ruby/backward -I/usr/local/include/ruby-1.9.1 -I. -D_XOPEN_SOURCE -D_DARWIN_C_SOURCE -fno-common -D_XOPEN_SOURCE=1 -O2 -g -Wall -Wno-parentheses -fno-common -pipe -fno-common -o http11.o -c http11.c http11.c: In function 'http_field': http11.c:77: error: 'struct RString' has no member named 'ptr' http11.c:77: error: 'struct RString' has no member named 'len' http11.c:77: warning: left-hand operand of comma expression has no effect http11.c:77: warning: statement with no effect http11.c: In function 'header_done': http11.c:172: error: 'struct RString' has no member named 'ptr' http11.c:174: error: 'struct RString' has no member named 'ptr' http11.c:176: error: 'struct RString' has no member named 'ptr' http11.c:177: error: 'struct RString' has no member named 'len' http11.c: In function 'HttpParser_execute': http11.c:298: error: 'struct RString' has no member named 'ptr' http11.c:299: error: 'struct RString' has no member named 'len' make: *** [http11.o] Error 1

    Read the article

  • Oracle Coding Standards Feature Implementation

    - by Mike Hofer
    Okay, I have reached a sort of an impasse. In my open source project, a .NET-based Oracle database browser, I've implemented a bunch of refactoring tools. So far, so good. The one feature I was really hoping to implement was a big "Global Reformat" that would make the code (scripts, functions, procedures, packages, views, etc.) standards compliant. (I've always been saddened by the lack of decent SQL refactoring tools, and wanted to do something about it.) Unfortunatey, I am discovering, much to my chagrin, that there doesn't seem to be any one widely-used or even "generally accepted" standard for PL-SQL. That kind of puts a crimp on my implementation plans. My search has been fairly exhaustive. I've found lots of conflicting documents, threads and articles and the opinions are fairly diverse. (Comma placement, of all things, seems to generate quite a bit of debate.) So I'm faced with a couple of options: Add a feature that lets the user customize the standard and then reformat the code according to that standard. —OR— Add a feature that lets the user customize the standard and simply generate a violations list like StyleCop does, leaving the SQL untouched. In my mind, the first option saves the end-users a lot of work, but runs the risk of modifying SQL in potentially unwanted ways. The second option runs the risk of generating lots of warnings and doing no work whatsoever. (It'd just be generally annoying.) In either scenario, I still have no standard to go by. What I'd need to know from you guys is kind of poll-ish, but kind of not. If you were going to use a tool of this nature, what parts of your SQL code would you want it to warn you about or fix? Again, I'm just at a loss due to a lack of a cohesive standard. And given that there isn't anything out there that's officially published by Oracle, I think this is something the community could weigh in on. Also, given the way that voting works on SO, the votes would help to establish the popularity of a given "refactoring." P.S. The engine parses SQL into an expression tree so it can robustly analyze the SQL and reformat it. There should be quite a bit that we can do to correct the format of the SQL. But I am thinking that for the first release of the thing, layout is the primary concern. Though it is worth noting that the thing already has refactorings for converting keywords to upper case, and identifiers to lower case.

    Read the article

  • Richfaces modal panel and a4j:keepAlive

    - by mykola
    Hello! I've got unexpected problems with richfaces (3.3.2) modal panel. When i try to open it, browser opens two panels instead of one: one is in the center, another is in the upper left corner. Besides, no fading happens. Also i have three modes: view, edit, new - and when i open my panel it should show either "Create new..." or "Edit..." in the header and actually it shows but not in the header as the latter isn't rendered at all though it should, because i set proper mode in action before opening this modal panel. Besides it works fine on all other pages i've made and there are tens of such pages in my application. I can't understand what's wrong here. The only way to fix it is to remove <a4j:keepAlive/> from the page that is very strange, imho. I'm not sure if code will be usefull here as it works fine everywhere in my application but this only case. So if you put it on your page it will probably work without problems. My only question is: are there any hidden or rare problems in interaction of these two elements (<rich:modalPanel> and <a4j:keepAlive>)? Or shall i spent another two or three days searching for some wrong comma, parenthesis or whatever in my code? :) For most curious. Panel itself: <!-- there's no outer form --> <rich:modalPanel id="panel" autosized="true" minWidth="300" minHeight="200"> <f:facet name="header"> <h:panelGroup id="panelHeader"> <h:outputText value="#{msg.new_smth}" rendered="#{MbSmth.newMode}"/> <h:outputText value="#{msg.edit_smth}" rendered="#{MbSmth.editMode}"/> </h:panelGroup> </f:facet> <h:panelGroup id="panelDiv"> <h:form > <!-- fields and buttons --> </h:form> </h:panelGroup> </rich:modalPanel> One of the buttons that open panel: <a4j:commandButton id="addBtn" reRender="panelHeader, panelDiv" value="#{form.add}" oncomplete="#{rich:component('panel')}.show()" action="#{MbSmth.add}" image="create.gif"/> Action invoked on button click: public void add() { curMode = NEW_MODE; // initial mode is VIEW_MODE newSmth = new Smth(); } Mode check: public boolean isNewMode() { return curMode == NEW_MODE; } public boolean isEditMode() { return curMode == EDIT_MODE; }

    Read the article

  • regex to break a string into "key" / "value" pairs when # of pairs is variable?

    - by user141146
    Hi, I'm using Ruby 1.9 and I'm wondering if there's a simple regex way to do this. I have many strings that look like some variation of this: str = "Allocation: Random, Control: Active Control, Endpoint Classification: Safety Study, Intervention Model: Parallel Assignment, Masking: Double Blind (Subject, Caregiver, Investigator, Outcomes Assessor), Primary Purpose: Treatment" The idea is that I'd like to break this string into its functional components Allocation: Random Control: Active Control Endpoint Classification: Safety Study Intervention Model: Parallel Assignment Masking: Double Blind (Subject, Caregiver, Investigator, Outcomes, Assessor) Primary Purpose: Treatment The "syntax" of the string is that there is a "key" which consists of one or more "words or other characters" (e.g. Intervention Model) followed by a colon (:). Each key has a corresponding "value" (e.g., Parallel Assignment) that immediately follows the colon (:)…The "value" consists of words, commas (whatever), but the end of the "value" is signaled by a comma. The # of key/value pairs is variable. I'm also assuming that colons (:) aren't allowed to be part of the "value" and that commas (,) aren't allowed to be part of the "key". One would think that there is a "regexy" way to break this into its component pieces, but my attempt at making an appropriate matching regex only picks up the first key/value pair and I'm not sure how to capture the others. Any thoughts on how to capture the other matches? regex = /(([^,]+?): ([^:]+?,))+?/ => /(([^,]+?): ([^:]+?,))+?/ irb(main):139:0> str = "Allocation: Random, Control: Active Control, Endpoint Classification: Safety Study, Intervention Model: Parallel Assignment, Masking: Double Blind (Subject, Caregiver, Investigator, Outcomes Assessor), Primary Purpose: Treatment" => "Allocation: Random, Control: Active Control, Endpoint Classification: Safety Study, Intervention Model: Parallel Assignment, Masking: Double Blind (Subject, Caregiver, Investigator, Outcomes Assessor), Primary Purpose: Treatment" irb(main):140:0> str.match regex => #<MatchData "Allocation: Random," 1:"Allocation: Random," 2:"Allocation" 3:" Random,"> irb(main):141:0> $1 => "Allocation: Random," irb(main):142:0> $2 => "Allocation" irb(main):143:0> $3 => " Random," irb(main):144:0> $4 => nil

    Read the article

  • .Net Entity Framework SaveChanges is adding without add method

    - by tmfkmoney
    I'm new to the entity framework and I'm really confused about how savechanges works. There's probably a lot of code in my example which could be improved, but here's the problem I'm having. The user enters a bunch of picks. I make sure the user hasn't already entered those picks. Then I add the picks to the database. var db = new myModel() var predictionArray = ticker.Substring(1).Split(','); // Get rid of the initial comma. var user = Membership.GetUser(); var userId = Convert.ToInt32(user.ProviderUserKey); // Get the member with all his predictions for today. var memberQuery = (from member in db.Members where member.user_id == userId select new { member, predictions = from p in member.Predictions where p.start_date == null select p }).First(); // Load all the company ids. foreach (var prediction in memberQuery.predictions) { prediction.CompanyReference.Load(); } var picks = from prediction in predictionArray let data = prediction.Split(':') let companyTicker = data[0] where !(from i in memberQuery.predictions select i.Company.ticker).Contains(companyTicker) select new Prediction { Member = memberQuery.member, Company = db.Companies.Where(c => c.ticker == companyTicker).First(), is_up = data[1] == "up", // This turns up and down into true and false. }; // Save the records to the database. // HERE'S THE PART I DON'T UNDERSTAND. // This saves the records, even though I don't have db.AddToPredictions(pick) foreach (var pick in picks) { db.SaveChanges(); } // This does not save records when the db.SaveChanges outside of a loop of picks. db.SaveChanges(); foreach (var pick in picks) { } // This saves records, but it will insert all the picks exactly once no matter how many picks you have. //The fact you're skipping a pick makes no difference in what gets inserted. var counter = 1; foreach (var pick in picks) { if (counter == 2) { db.SaveChanges(); } counter++; } There's obviously something going on with the context I don't understand. I'm guessing I've somehow loaded my new picks as pending changes, but even if that's true I don't understand I have to loop over them to save changes. Can someone explain this to me?

    Read the article

  • jQuery: modify hidden form field value before submit

    - by Jason Miesionczek
    I have the following code in a partial view (using Spark): <span id="selectCount">0</span> video(s) selected. <for each="var video in Model"> <div style="padding: 3px; margin:2px" class="video_choice" id="${video.YouTubeID}"> <span id="video_name">${video.Name}</span><br/> <for each="var thumb in video.Thumbnails"> <img src="${thumb}" /> </for> </div> </for> # using(Html.BeginForm("YouTubeVideos","Profile", FormMethod.Post, new { id = "youTubeForm" })) # { <input type="hidden" id="video_names" name="video_names" /> <input type="submit" value="add selected"/> # } <ScriptBlock> $(".video_choice").click(function() { $(this).toggleClass('selected'); var count = $(".selected").length; $("#selectCount").html(count); }); var options = { target: '#videos', beforeSubmit: function(arr, form, opts) { var names = []; $(".selected").each(function() { names[names.length] = $(this).attr('id'); }); var namestring = names.join(","); $("#video_names").attr('value',namestring); //alert(namestring); //arr["video_names"] = namestring; //alert($.param(arr)); //alert($("#video_names").attr('value')); return true; } }; $("#youTubeForm").ajaxForm(options); </ScriptBlock> Essentially i display a series of divs that contain information pulled from the YouTube API. I use jQuery to allow the the user to select which videos they would like to add to their profile. When i submit the form i would like to populate the hidden field with a comma separated list of video ids. Everything works except that when i try to set the value of the field, in the controller on post, the field comes back empty. I am using the jQuery ajax form plugin. What am i doing wrong that is not allowing the value i set in the field to be sent to the server?

    Read the article

  • How to implement a tagging plugin for jQuery

    - by anxiety
    Goal: To implement a jQuery plugin for my rails app (or write one myself, if necessary) that creates a "box" around text after a delimiter is typed. Example: With tagging on SO, the user begins typing a tag, then selects one from the drop-down list provided. The input field recognizes that a tag has been selected, puts a space and then is ready for the next tag. Similarly, I am attempting to use this plugin to put a box around the previously entered tag before moving to to accept the next tag/input. The instructions in the README.txt seem simple enough, however I have been receiving a $(".tagbox").tagbox is not a function error when debugging my app with firebug. Here is what I have in my application.js: $(document).ready( function(){ $('.tagbox').tagbox({ separator: /\[,]/, // specifying comma separation for <code>tags</code> }); }); And here is my _form.html.erb: <% form_for @tag do |f| %> <%= f.error_messages %> <p> <%= f.label :name %><br /> <%= text_field :tag, :name, { :method => :get, :class => "tagbox" } %> </p> <p><%= f.submit "Submit" %></p> <% end %> I have omitted some other code (namely the implementation of an autocomplete plugin) existing within my _form.html.erb and application.js for sake of readability. The inclusion or exclusion of this omitted code does not affect the performance of this plugin. I have included all of the necessary files for the tagbox plugin (as well as application.js after all other included JS files) within the javascript_include_tag in my application.html.erb file. I'm pretty much confused as to why I'd be getting this "not a function" error when jquery.tagbox.js clearly defines the function and is included in the head of my html page in question. I've been struggling with this plugin for longer than I'd like to admit, so any help would really be appreciated. And, of course, I'm open to any other plugins or from-scratch suggestions you may have in mind.. This tagbox plugin does not seem to have a wealth of documentation or any currently working examples. Also to note, I'm trying to avoid using jrails. Thanks for your time

    Read the article

  • Google Chart Number formatting

    - by MizAkita
    I need to format my pie and column charts to show the $ and comma in currency format ($###,###) when you hover over the charts. Right now, it is displaying the number and percentage but the number as #####.## here is my code. Any help would be appreciated. // Load the Visualization API and the piechart package. google.load('visualization', '1.0', {'packages':['corechart']}); // Set a callback to run when the Google Visualization API is loaded. google.setOnLoadCallback(drawChart); var formatter = new google.visualization.NumberFormat({ prefix: '$' }); formatter.format(data, 1); var options = { pieSliceText: 'value' }; // Callback that creates and populates a data table, // instantiates the pie chart, passes in the data and // draws it. function drawChart() { // REVENUE CHART - Create the data table. var data4 = new google.visualization.DataTable(); data4.addColumn('string', 'Status'); data4.addColumn('number', 'In Thousands'); data4.addRows([ ['Net tution & Fees', 213.818], ['Auxiliaries', 30.577], ['Government grants/contracts', 39.436], ['Private grants/gifts', 39.436], ['Investments', 10.083], ['Clinics', 14.353], ['Other', 5.337] ]); // EXPENSES CHART - Create the data table. var data5 = new google.visualization.DataTable(); data5.addColumn('string', 'Status'); data5.addColumn('number', 'Amount'); data5.addRows([ ['Instruction', 133.868], ['Sponsored Progams', 34.940], ['Auxiliaries', 30.064], ['Academic Support', 25.529], ['Depreciation & amortization', 18.548], ['Student Services', 22.626], ['Plant operations & maintenance', 18.105], ['Fundraising', 13.258], ['Geneal Administration', 11.628], ['Interest', 6.846], ['Student Aid', 1.886], ]); // ENDOWMENT CHART - Create the data table. var data6 = new google.visualization.DataTable(); data6.addColumn('string', 'Status'); data6.addColumn('number', 'In Millions'); data6.addRows([ ['2010', 178.7], ['2011', 211.693], ['2012', 199.3] ]); // Set REVENUE chart options var options4 = { is3D: true, fontName: 'Arial', colors:['#AFD8F8', '#F6BD0F', '#8BBA00', '#FF8E46', '#008E8E', '#CCCCCC', '#D64646', '#8E468E'], 'title':'', 'width':550, 'height':250}; // Set EXPENSES chart options var options5 = { is3D: true, fontName: 'Arial', colors:['#AFD8F8', '#F6BD0F', '#8BBA00', '#FF8E46', '#008E8E', '#CCCCCC', '#D64646', '#8E468E'], 'title':'', 'width':550, 'height':250}; // Set ENDOWMENT chart options var options6 = { is3D: true, fontName: 'Arial', colors:['#AFD8F8', '#F6BD0F', '#8BBA00', '#FF8E46', '#008E8E', '#CCCCCC', '#D64646', '#8E468E'], 'title':'', 'width':450, 'height':250}; // Instantiate and draw our chart, passing in some options. var chart4 = new google.visualization.PieChart(document.getElementById('chart_div4')); chart4.draw(data4, options4); var chart5 = new google.visualization.PieChart(document.getElementById('chart_div5')); chart5.draw(data5, options5); var chart6 = new google.visualization.ColumnChart(document.getElementById('chart_div6')); chart6.draw(data6, options6);}

    Read the article

  • Modify a php limit text function adding some kind of offset to it

    - by webmasters
    Maybe you guys can help: I have a variable called $bio with bio data. $bio = "Hello, I am John, I'm 25, I like fast cars and boats. I work as a blogger and I'm way cooler then the author of the question"; I search the $bio using a set of functions to search for a certain word, lets say "author" which adds a span class around that word, and I get: $bio = "Hello, I am John, I'm 25, I like fast cars and boats. I work as a blogger and I'm way cooler then the <span class=\"highlight\">author</span> of the question"; I use a function to limit the text to 85 chars: $bio = limit_text($bio,85); The problem is when there are more then 80 chars before the word "author" in $bio. When the limit_text() is applied, I won't see the highlighted word author. What I need is for the limit_text() function to work as normal, adding all the words that contain the span class highlight at the end. Something like this: *"This is the limited text to 85 chars, but there are no words with the span class highlight so I am putting to be continued ... **author**, **author2** (and all the other words that have a span class highlight around them separate by comma "* Hope you understood what I mean, if not, please comment and I'll try to explain better. Here is my limit_text() function: function limit_text($text, $length){ // Limit Text if(strlen($text) > $length) { $stringCut = substr($text, 0, $length); $text = substr($stringCut, 0, strrpos($stringCut, ' ')); } return $text; } UPDATE: $xturnons = str_replace(",", ", ", $xturnons); $xbio = str_replace(",", ", ", $xbio); $xbio = customHighlights($xbio,$toHighlight); $xturnons = customHighlights($xturnons,$toHighlight); $xbio = limit_text($xbio,85); $xturnons = limit_text($xturnons,85); The customHighlights function which adds the span class highlighted: function addRegEx($word){ // Highlight Words return "/" . $word . '[^ ,\,,.,?,\.]*/i'; } function highlight($word){ return "<span class='highlighted'>".$word[0]."</span>"; } function customHighlights($searchString,$toHighlight){ $searchFor = array_map('addRegEx',$toHighlight); $result = preg_replace_callback($searchFor,'highlight',$searchString); return $result; }

    Read the article

  • .live event doesnt work till second click

    - by ChampionChris
    I have 2 list on a page that are linked. When I drag a li element from list 1 to list 2 the live events on list 1 don't work on the first click only second click. Below is the code that adds the li (obj) to list 2. function AddToDropBox(obj) { $(obj).children(".handle").animate({ width: "20px" }).children("strong").fadeOut(); $(obj).children("span:not(.track,.play,.handle,:has(.btn-edit))").fadeOut('fast'); $(obj).children(".play").css("margin-right", "8px"); $(obj).css({ "opacity": "0.0", "width": "284px" }).animate({ opacity: "1.0" }); if ($(".sidebar-drop-box ul").children(".admin-song").length > 0) { $(".dropTitle").fadeOut("fast"); $(".sidebar-drop-box ul.admin-song-list").css("min-height", "0"); } if (typeof SetLinks == 'function') { SetLinks(); } //CBG Changes adds media ID to hidden field //checks id there is a value in field then adds comma if(document.getElementById("ctl00_cphBody_hfRemoveMedia").value==""||document.getElementById("ctl00_cphBody_hfRemoveMedia").value==null) { document.getElementById("ctl00_cphBody_hfRemoveMedia").value=(obj).attr("mediaid"); } else { var localMediaIDs=document.getElementById("ctl00_cphBody_hfRemoveMedia").value; document.getElementById("ctl00_cphBody_hfRemoveMedia").value=localMediaIDs+", "+(obj).attr("mediaid"); } // alert("hfid: "+document.getElementById("ctl00_cphBody_hfRemoveMedia").value); //END CBG Modifications } this is one of the live() events that dont fire until the second click after the drag. This live() event is in a document.ready function(). // Live for deleting. $(".btn-del").live("click", function(e) { DeleteItem(this); $(this).removeClass("btn-del").addClass("btn-add").parents("li").removeClass("alt").addClass("removed"); var oldTxt = $(this).parents("li").find(".status").text(); $(this).parents("li").find(".status").text("Removed").attr("oldstat", oldTxt); $("#timeHolder input[type=hidden]").val(($("#timeHolder input[type=hidden]").val() * 1) - ($(this).parents("li").find(".time").attr("length") * 1)); CalculateAggregates(); isDirty = false; }); EDIT @dreaton.. Im new to jquery and javascript so thanks for the last tip... Im not sure what you mean about cache the query's. ... the delegete feature is giving me this Microsoft JScript runtime error: Object doesn't support this property or method this is the way I have the code $('#ulPlaylist').delegate('.btn-del', 'click', function (e) { DeleteItem(this); $(this).removeClass("btn-del").addClass("btn-add").parents("li").removeClass("alt").addClass("removed"); var oldTxt = $(this).parents("li").find(".status").text(); $(this).parents("li").find(".status").text("Removed").attr("oldstat", oldTxt); $("#timeHolder input[type=hidden]").val(($("#timeHolder input[type=hidden]").val() * 1) - ($(this).parents("li").find(".time").attr("length") * 1)); CalculateAggregates(); isDirty = false; });

    Read the article

  • Parsing XML file using a for loop

    - by Johnny Spintel
    I have been working on this program which inserts an XML file into a MYSQL database. I'm new to the whole .jar idea by inserting packages. Im having an issue with parse(), select(), and children(). Can someone inform me how I could fix this issue? Here is my stack trace and my program below: Exception in thread "main" java.lang.Error: Unresolved compilation problems: The method select(String) is undefined for the type Document The method children() is undefined for the type Element The method children() is undefined for the type Element The method children() is undefined for the type Element The method children() is undefined for the type Element at jdbc.parseXML.main(parseXML.java:28) import java.io.*; import java.sql.*; import org.jsoup.Jsoup; import org.w3c.dom.*; import javax.xml.parsers.*; public class parseXML{ public static void main(String xml) { try{ BufferedReader br = new BufferedReader(new FileReader(new File("C:\\staff.xml"))); String line; StringBuilder sb = new StringBuilder(); while((line=br.readLine())!= null){ sb.append(line.trim()); } Document doc = Jsoup.parse(line); StringBuilder queryBuilder; StringBuilder columnNames; StringBuilder values; for (Element row : doc.select("row")) { // Start the query queryBuilder = new StringBuilder("insert into customer("); columnNames = new StringBuilder(); values = new StringBuilder(); for (int x = 0; x < row.children().size(); x++) { // Append the column name and it's value columnNames.append(row.children().get(x).tagName()); values.append(row.children().get(x).text()); if (x != row.children().size() - 1) { // If this is not the last item, append a comma columnNames.append(","); values.append(","); } else { // Otherwise, add the closing paranthesis columnNames.append(")"); values.append(")"); } } // Add the column names and values to the query queryBuilder.append(columnNames); queryBuilder.append(" values("); queryBuilder.append(values); // Print the query System.out.println(queryBuilder); } }catch (Exception err) { System.out.println(" " + err.getMessage ()); } } }

    Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >