Search Results

Search found 16598 results on 664 pages for 'device center'.

Page 64/664 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

  • Cannot mount USB 3 harddrive

    - by Thijs
    I cannot mount an USB 3 harddrive. When looking at dmesg I got the following error: [ 96.463269] usb 3-2.1: >new low-speed USB device number 10 using xhci_hcd [ 96.485777] usb 3-2.1: >New USB device found, idVendor=046d, idProduct=c025 [ 96.485787] usb 3-2.1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 96.485792] usb 3-2.1: >Product: USB-PS/2 Optical Mouse [ 96.485797] usb 3-2.1: >Manufacturer: B16_b_02 [ 96.486118] usb 3-2.1: >ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 96.490149] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.1/3-2.1:1.0/input/input12 [ 96.490500] hid-generic 0003:046D:C025.0003: >input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:14.0-2.1/input0 [ 114.088984] usb 3-2.3: >new high-speed USB device number 11 using xhci_hcd [ 114.105041] usb 3-2.3: >New USB device found, idVendor=13fd, idProduct=1618 [ 114.105051] usb 3-2.3: >New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 257.531777] usb 3-2.3: >USB disconnect, device number 11 [ 258.513912] usb 3-2.4: >new high-speed USB device number 12 using xhci_hcd [ 258.514046] usb 3-2.4: >Device not responding to set address. [ 258.717649] usb 3-2.4: >Device not responding to set address. [ 258.921203] usb 3-2.4: >device not accepting address 12, error -71 [ 258.937388] hub 3-2:1.0: >unable to enumerate USB device on port 4 I have tried to mount the drive on ubuntu-12.04 and it mounts just fine.

    Read the article

  • my LaCie 500 Gb not mounted on 11.10

    - by pooo
    My external USB drive was recognized with 10.x versions of Ubuntu but since 11.x I am getting stuck, I had tried everything I read in forums but still the same error: 4956.401052] usb 2-1.4: new high speed USB device number 14 using ehci_hcd [ 4956.539216] scsi14 : uas [ 4956.740955] scsi 14:0:0:0: Direct-Access LaCie Rugged FW USB3 1081 PQ: 0 ANSI: 4 [ 4963.256055] scsi 14:0:0:0: uas_eh_abort_handler tag 0 [ 4963.256076] scsi 14:0:0:0: uas_eh_device_reset_handler tag 0 [ 4963.256085] scsi 14:0:0:0: uas_eh_target_reset_handler tag 0 [ 4963.256091] scsi 14:0:0:0: uas_eh_bus_reset_handler tag 0 [ 4963.328122] usb 2-1.4: reset high speed USB device number 14 using ehci_hcd [ 4963.468743] scsi 14:0:0:0: Device offlined - not ready after error recovery [ 4963.468813] scsi 14:0:0:0: rejecting I/O to offline device [ 4963.468831] scsi 14:0:0:0: rejecting I/O to offline device [ 4963.469204] scsi 14:0:0:1: uas_sense_old: urb length 26 disagrees with IU sense data length 510, using 18 bytes of sense data [ 4963.512104] sd 14:0:0:0: Attached scsi generic sg3 type 0 [ 4994.253779] sd 14:0:0:0: uas_eh_abort_handler tag 0 [ 4994.253802] sd 14:0:0:0: uas_eh_device_reset_handler tag 0 [ 4994.253809] sd 14:0:0:0: uas_eh_target_reset_handler tag 0 [ 4994.253815] sd 14:0:0:0: uas_eh_bus_reset_handler tag 0 [ 4994.325880] usb 2-1.4: reset high speed USB device number 14 using ehci_hcd [ 4994.466488] sd 14:0:0:0: Device offlined - not ready after error recovery [ 4994.466555] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466573] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466582] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466588] sd 14:0:0:0: [sdc] READ CAPACITY failed [ 4994.466593] sd 14:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 4994.466600] sd 14:0:0:0: [sdc] Sense not available. [ 4994.466608] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466616] sd 14:0:0:0: [sdc] Write Protect is off [ 4994.466622] sd 14:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 4994.466629] sd 14:0:0:0: rejecting I/O to offline device [ 4994.466635] sd 14:0:0:0: [sdc] Asking for cache data failed [ 4994.466640] sd 14:0:0:0: [sdc] Assuming drive cache: write through [ 4994.467003] sd 14:0:0:0: [sdc] Attached SCSI disk if I am trying on an old ubuntu, the drive is mounted,

    Read the article

  • radeon display driver clones monitors while using Xinerama

    - by gregmuellegger
    I'm trying to get my two Radeon HD 4770 cards working with three monitors. Xinerama works so far in the way that I have two fully working monitors were I can move windows from one to the other. My problem now is that my third monitor is a clone of my second monitor (displaying the exact same thing). These monitors are connected to the same graphic card ("Screen Middle" and "Screen Right" in the xorg.conf below). Here is my xorg.conf: Section "ServerLayout" Identifier "ThreeMonitors" Screen "Screen Left" 0 0 Screen "Screen Middle" RightOf "Screen Left" Screen "Screen Right" RightOf "Screen Middle" Option "Xinerama" EndSection Section "Monitor" Identifier "Monitor Left" Option "DPMS" EndSection Section "Monitor" Identifier "Monitor Middle" Option "DPMS" EndSection Section "Monitor" Identifier "Monitor Right" Option "DPMS" EndSection Section "Device" Identifier "Device Left" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:3:0:0" Screen 0 EndSection Section "Screen" Identifier "Screen Left" Device "Device Left" Monitor "Monitor Left" SubSection "Display" Depth 24 EndSubSection EndSection Section "Device" Identifier "Device Middle" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:2:0:0" Screen 0 EndSection Section "Screen" Identifier "Screen Middle" Device "Device Middle" Monitor "Monitor Middle" SubSection "Display" Depth 24 EndSubSection EndSection Section "Device" Identifier "Device Right" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "ATI Radeon HD 4770 [RV740]" BusID "PCI:2:0:1" Screen 1 EndSection Section "Screen" Identifier "Screen Right" Device "Device Right" Monitor "Monitor Right" SubSection "Display" Depth 24 EndSubSection EndSection I'm using a fresh Kubuntu 10.10 installation with propsed-updates enabled since this repo contains a xorg fix for using multiple graphic cards. I hope someone can help me out. Very many thanks!!

    Read the article

  • problem in connecting Reliance booadband +

    - by Athira R
    I tried connceting reliance broadband in ubuntu. then an autorun prompt will come. when i click install another pop up coming saying autorun file not found. And when i checked in Internet connection to add connection. Reliance broadband option iteself is not there as connected device. This is Athira. I could not find any add comment option on my main question. So i created a new account and adding as new answer to ur question. athira@athira-laptop:~$ sudo lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 004: ID 12d1:1505 Huawei Technologies Co., Ltd. Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 0421:0508 Nokia Mobile Phones E65 (PC Suite mode) Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 064e:a103 Suyin Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub athira@athira-laptop:~$ i got this after running it in ubuntu 10.04

    Read the article

  • SharePoint 2010 Center and Fixed Width of all content on page including the ribbon

    - by Bill Daugherty
    All, I am trying to make the width of the sharepoint 2010 web site to be within a fixed width and centered across the screen. I would like for it to be 800px and centered. When i do this, it seems like it starts to work until the ribbion bar renters. Here is my attempt so far: body.v4/* _lcid="1033" _version="14.0.4536" _LocalBinding */ body,form{ margin:0px; width:800px; text-align:center; vertical-align:middle; } .ms-toolbar{ font-family:verdana; font-size:8pt; text-decoration:none; /* [ReplaceColor(themeColor:"Hyperlink")] */ color:#0072BC; } a.ms-toolbar:hover{ text-decoration:underline; /* [ReplaceColor(themeColor:"Accent1",themeShade:"0.8")] */ color:#005e9a; } .ms-toolbar-togglebutton-on{ /* [ReplaceColor(themeColor:"Accent3-Darker")] */ border:1px solid #2353b2; /* [ReplaceColor(themeColor:"Accent4-Lightest")] */ background-color:#fffacc; } table.ms-toolbar{ height:45px; border:none; /* [RecolorImage(themeColor:"Light2",includeRectangle:{x:0,y:610,width:1,height:42})] */ background:url("/_layouts/images/bgximg.png") repeat-x -0px -610px; /* [ReplaceColor(themeColor:"Light1")] */ background-color:#fff; } table.ms-toolbar{ /* [ReplaceColor(themeColor:"Light2-Lightest")] */ border:1px solid #f1f1f2; } .ms-menutoolbar{ /* [ReplaceColor(themeColor:"Light2-Lightest")] */ border-bottom:1px solid #f1f1f2; /* [ReplaceColor(themeColor:"Light1")] */ background-color:#fff; /* [RecolorImage(themeColor:"Light2",includeRectangle:{x:0,y:610,width:1,height:42})] */ background:url("/_layouts/images/bgximg.png") repeat-x -0px -610px; height:45px; } .ms-menutoolbar td{ padding:0px 0px 0px 4px; margin:0px; border:none; } .ms-menutoolbar td a{ /* [ReplaceColor(themeColor:"Hyperlink")] */ color:#0072bc; font-size:8pt; font-family:verdana; text-decoration:none; } .ms-menutoolbar td a:hover{ /* [ReplaceColor(themeColor:"Hyperlink",themeShade:"0.82")] */ color:#005e9a; text-decoration:none; } .ms-menubuttoninactivehover,.ms-buttoninactivehover{ margin:3px; padding:3px 4px 4px 4px; border:1px solid transparent; background-color:transparent; white-space:nowrap; } .ms-menubuttonactivehover,.ms-buttonactivehover{ margin:3px; padding:3px 4px 4px 4px; /* [RecolorImage(themeColor:"Light1-Darkest",includeRectangle:{x:0,y:431,width:1,height:21})] */ background:url("/_layouts/images/bgximg.png") repeat-x -0px -431px; /* [ReplaceColor(themeColor:"Light1")] */ background-color:#fff; /* [ReplaceColor(themeColor:"Light1-Lighter")] */ border:solid 1px #cccccc; cursor:pointer; } .ms-buttoninactivehover{ white-space:nowrap; } .ms-buttoninactivehover img,.ms-buttonactivehover img{ margin:0px 1px 0px 0px; } td.ms-menutoolbarheader{ font-size:10pt; font-family:verdana; /* [ReplaceColor(themeColor:"Accent3-Medium")] */ color:#204d89; font-weight:bold; line-height:16px; padding-left:7px; padding-right:7px; } .ms-listheaderlabel{ /* [ReplaceColor(themeColor:"Dark2")] */ color:#204d89; } .ms-listheaderlabel,.ms-viewselector,.ms-viewselectortext,.ms-viewselectorhover{ font-size:8pt; font-family:tahoma; } .ms-menutoolbar td td.ms-viewselector,.ms-menutoolbar td td.ms-viewselectorhover,.ms-toolbar td td.ms-viewselector,.ms-toolbar td td.ms-viewselectorhover,td.ms-viewselector{ /* [ReplaceColor(themeColor:"Light1")] */ background-color:#ffffff; /* [ReplaceColor(themeColor:"Dark2-Medium")] */ border:1px solid #D3D6DA; font-weight:bold; padding:0px; } .ms-menutoolbar td td{ border:none; } div.ms-viewselector,div.ms-viewselectorhover{ padding:2px 4px 2px 4px; cursor:pointer; } div.ms-viewselector a,div.ms-viewselectorhover a.ms-menu-a span{ /* [ReplaceColor(themeColor:"Dark1")] */ color:#000000; } .ms-viewselector-arrow{ vertical-align:middle; } .ms-menutoolbar td td.ms-viewselectorhover,.ms-toolbar td td.ms-viewselectorhover{ /* [RecolorImage(themeColor:"Accent1",method:"Tinting",includeRectangle:{x:0,y:654,width:1,height:18})] */ background:url("/_layouts/images/bgximg.png") repeat-x -0px -654px; /* [ReplaceColor(themeColor:"Accent1-Lighter")] */ border-color:#91cdf2; /* [ReplaceColor(themeColor:"Accent1",themeTint:"0.35")] */ background-color:#ccebff; } .ms-bottompaging{ /* [ReplaceColor(themeColor:"Accent3-Lightest")] */ background:#ebf3ff; } .ms-bottompagingline1{ height:3px; /* [ReplaceColor(themeColor:"Light1")] */ background-color:#ffffff; } .ms-bottompagingline2,.ms-bottompagingline3{ height:1px; /* [ReplaceColor(themeColor:"Light1")] */ background-color:#ffffff; } .ms-bottompaging .ms-vb{ /* [ReplaceColor(themeColor:"Light1")] */ background-color:#ffffff; } .ms-bottompagingline2 img,.ms-bottompagingline3 img,.ms-partline img{ display:none; } .ms-paging{ padding-left:11px; padding-right:11px; padding-bottom:4px; font-family:tahoma,sans-serif; font-size:8pt; font-weight:normal; /* [ReplaceColor(themeColor:"Accent3-Darker")] */ color:#204d89; } .ms-bottompaging .ms-paging{ /* [ReplaceColor(themeColor:"Dark1-Medium")] */ color:#4c4c4c; } .ms-menutoolbar .ms-splitbuttondropdown{ padding:3px 2px 0px 2px; } .ms-menutoolbar .ms-splitbuttontext{ padding:0px 7px 1px 7px; } .ms-splitbutton{ margin:0px 2px; } .ms-splitbuttonhover{ margin:0px 2px; /* [RecolorImage(themeColor:"Accent6-Darker",method:"Tinting",includeRectangle:{x:0,y:431,width:1,height:21})] */ background:url("/_layouts/images/bgximg.png") repeat-x -0px -431px; border-collapse:collapse; height:22px; background-color:#fff; } .ms-splitbuttonhover .ms-splitbuttondropdown{ padding:3px 1px 0px 2px; } .ms-splitbuttonhover .ms-splitbuttontext{ padding:0px 6px 0px 6px; } .ms-splitbuttonhover .ms-splitbuttondropdown,.ms-splitbuttonhover .ms-splitbuttontext{ border:solid 1px #cccccc; cursor:pointer; } .ms-propertysheet { font-size:1em; } .ms-propertysheet th.ms-gridT1 { text-align:left; /* [ReplaceColor(themeColor:"Dark1")] */ color:#000000; width:190px; } .ms-viewselect a:link{ font-size:8pt; font-family:Verdana,sans-serif; /* [ReplaceColor(themeColor:"Accent3")] */ color:#003399; } select{ font-size:8pt; font-family:Verdana,sans-serif; } hr{ /* [ReplaceColor(themeColor:"Accent3")] */ color:#003399; height:2px; } .ms-input{ font-size:8pt; font-family:Verdana,sans-serif; } .ms-treeviewouter{ margin-top:5px; } .ms-quicklaunch table td{ /* [ReplaceColor(themeColor:"Accent3-Lighter")] */ border-top:1px solid #add1ff; } .ms-quicklaunch .ms-treeviewouter table td{ border-top:none; } .ms-quicklaunch table.ms-navheader td,.ms-quicklaunch span.ms-navheader{ padding:1px 4px 4px 4px; } div.ms-treeviewouter > div > div{ border:none; } .ms-quicklaunch span.ms-navheader{ /* [ReplaceColor(themeColor:"Accent3-Lightest")] */ background-color:#d6e8ff; /* [ReplaceColor(themeColor:"Accent3-Lighter")] */ border-top:1px solid #add1ff; /* [ReplaceColor(themeColor:"Accent3-Lightest")] */ border-left:solid 1px #f2f8ff; /* [ReplaceColor(themeColor:"Accent3-Lighter")] */ border-bottom:1px solid #add1ff; padding:1px 6px 3px 6px; } .ms-quicklaunch table.ms-navsubmenu2 td{ border:none; } .ms-quicklaunch table.ms-selectednavheader td{ width:100%; /* [ReplaceColor(themeColor:"Accent6-Lightest")] */ background-color:#fff699; } .ms-quicklaunch table.ms-selectednavheader{ border:none; } .ms-quicklaunch span{ display:block; } .ms-quicklaunch div.ms-navsubmenu1 br{ display:none; } .ms-quicklaunch table.ms-selectednav{ /* [ReplaceColor(themeColor:"Accent6-Darker")] */ border:solid 1px #d2b47a; /* [RecolorImage(themeColor:"Accent1",method:"Tinting")] */ background-image:url("/_layouts/images/selectednav.gif"); background-repeat:repeat-x; /* [ReplaceColor(themeColor:"Accent6-Lightest")] */ background-color:#ffe6a0; margin:2px; margin-bottom:0; width:97%; } .ms-quicklaunch table.ms-selectednav td{ background:transparent url("/_layouts/images/selectednavbullet.gif"); background-repeat:no-repeat; background-position:left top; /* [ReplaceColor(themeColor:"Light1")] */ border:solid 1px #ffffff; padding:0px 4px 1px 12px; margin:0px; } table.ms-selectednav td a.ms-selectednav{ background:none; /* [ReplaceColor(themeColor:"Dark1")] */ color:#000000; } .ms-quicklaunch table.ms-selectednavheader td{ width:100%; /* [ReplaceColor(themeColor:"Accent6-Lighter")] */ background-color:#ffe6a0; /* [RecolorImage(themeColor:"Accent1",method:"Tinting")] */ background-image:url("/_layouts/images/selectednav.gif"); background-repeat:repeat-x; padding-top:2px; padding-bottom:2px; /* [ReplaceColor(themeColor:"Light1")] */ border-top:solid 1px #ffffff; /* [ReplaceColor(themeColor:"Light1")] */ border-left:solid 1px #ffffff; padding:1px 6px 3px 6px; } .ms-selectednavheader a{ font-weight:bold; /* [ReplaceColor(themeColor:"Dark1")] */ color:#000000; text-decoration:none; } .ms-selectednavheader a:hover{ /* [ReplaceColor(themeColor:"Dark1")] */ color:#000000; text-decoration:underline; } table.ms-navitem td,span.ms-navitem{ background-image:url("/_layouts/images/navBullet.gif"); background-repeat:no-repeat; background-position:left top; padding:3px 6px 4px 16px; font-family:tahoma; } .ms-navsubmenu1{ width:100%; border-collapse:collapse; /* [ReplaceColor(themeColor:"Light1-Lightest")] */ background-color:#f2f8ff; } .ms-navsubmenu2{ width:100%; /* [ReplaceColor(themeColor:"Light1-Lightest")] */ background-color:#f2f8ff; margin-bottom:6px; } table.ms-navselected{ padding:2px; } table.ms-navselected,span.ms-navselected{ /* [RecolorImage(themeColor:"Accent6",method:"Tinting")] */ background-image:url("/_layouts/images/SELECTEDNAV.GIF"); /* [ReplaceColor(themeColor:"Accent6-Lighter")] */ background-color:#ffe6a0; background-repeat:repeat-x; } table.ms-navselected td{ background-image:url("/_layouts/images/navBullet.gif"); background-repeat:no-repeat; background-position:top left; padding:3px 6px 4px 17px; } table.ms-navheader td{ background-image:none; } .ms-navheader a{ font-weight:bold; /* [ReplaceColor(themeColor:"Accent3")] */ color:#003399; text-decoration:none; } .ms-navheader a:hover{ /* [ReplaceColor(themeColor:"Dark1")] */ color:#000000; text-decoration:underline; } .ms-navitem a{ /* [ReplaceColor(themeColor:"Dark2")] */ color:#3b4f65 !important; text-decoration:none; display:inline-block; } .ms-navitem a:hover{ /* [ReplaceColor(themeColor:"Accent1")] */ color:#44aff6 !important; text-decoration:underline !important; } .ms-quicklaunchouter{ border:none; margin-bottom:5px; } .ms-quicklaunchouter{ margin:0px 1px 2px 1px; } .ms-treeviewouter a.ms-navitem{ padding:4px 4px 5px; margin-left:4px; border-color:transparent; border-width:1px; border-style:solid !important; } .ms-tvselected a.ms-navitem{ /* [RecolorImage(themeColor:"Light1")] */ background:url("/_layouts/images/selbg.png") repeat-x left top; /* [ReplaceColor(themeColor:"Accent1",themeTint:"0.15")] */ background-color:#ccebff; /* [ReplaceColor(themeColor:"Accent1-Lighter")] */ border-color:#91cdf2; /* [ReplaceColor(themeColor:"Accent1-Lightest")] */ border-top-color:#c6e5f8; border-width:1px; border-style:solid !important; /* [ReplaceColor(themeColor:"Dark2")] */ color:#003759 !important; display:inline-block; } .ms-tvselected a:hover{ /* [ReplaceColor(themeColor:"Dark2")] */ color:#003759 !important; } table.ms-recyclebin td{ /* [ReplaceColor(themeColor:"Light1-Lightest")] */ background-color:#f2f8ff; width:100%; /* [ReplaceColor(themeColor:"Light1")] */ border-top:solid 1px #ffffff; /* [ReplaceColor(themeColor:"Light1")] */ border-left:solid 1px #ffffff; padding:3px 5px 7px 3px; } table.ms-recyclebin td a{ font-weight:bold; /* [ReplaceColor(themeColor:"Accent5-Darker")] */ color:#008800; text-decoration:none; } table.ms-recyclebin td a:hover{ /* [ReplaceColor(themeColor:"Dark1")] */ color:#000000; text-decoration:underline; } .ms-quickLaunch{ padding-top:5px; } .ms-quickLaunch h3{ font-size:1em; font-weight:normal; /* [ReplaceColor(themeColor:"Dark2")] */ color:#929fad; margin:0px 0px 6px 10px; } .ms-quicklaunchheader{ padding:2px 6px 4px 10px; font-weight:bold; /* [ReplaceColor(themeColor:"Light1-Lighter")] */ color:#676767; background-image:url("/_layouts/images/quickLaunchHeader.gif"); background-repeat:repeat-x; /* [ReplaceColor(themeColor:"Accent3-Lightest")] */ background-color:#d6e8ff; /* [ReplaceColor(themeColor:"Light1-Lightest")] */ border-left:solid 1px #f2f8ff; margin-left:-7px; font-size:inherit; } .ms-quicklaunchheader a,.ms-unselectednav a{ /* [ReplaceColor(themeColor:"Dark1-Lighter")] */ color:#676767 !important; text-decoration:none; } .ms-quicklaunchheader a:hover{ /* [ReplaceColor(themeColor:"Dark1")] */ color:#000000 !important; text-decoration:underline; } .ms-navline{ /* [ReplaceColor(themeColor:"Light1-Darker")] */ border-bottom:1px solid #adadad; } .ms-navwatermark{ /* [ReplaceColor(themeColor:"Accent6-Lighter")] */ color:#ffdf88; } .ms-selectednav{ border:1px solid #2353b2; /* [ReplaceColor(themeColor:"Accent6-Lightest")] */ background:#fff699; padding-top:1px; padding-bottom:2px; } .ms-unselectednav{ /* [ReplaceColor(themeColor:"Accent3-Medium")] */ border:1px solid #83b0ec; padding-top:1px; padding-bottom:2px; } .ms-verticaldots{ /* [ReplaceColor(themeColor:"Accent3-Medium")] */ border-right:1px solid #83b0ec; border-left:none; } .ms-nav{ /* [ReplaceColor(themeColor:"Accent3-Medium")] */ background-color:#83b0ec; font-family:tahoma; } .ms-globalTitleArea{ text-align:right; background-image:url("/_layouts/images/siteTitleBKGD.gif"); background-position:right top; background-repeat:repeat-y; padding-left:5px; padding-right:0px; padding-top:1px; } .ms-titlearea{ /* [ReplaceColor(themeColor:"Dark1-Lighter")] */ color:#666666; font-family:tahoma; font-size:8pt; letter-spacing:.1em; } .ms-titlearea a { /* [ReplaceColor(themeColor:"Accent3-Darker")] */ color:#3966bf; text-decoration:none; } .ms-titlearea a:hover { /* [ReplaceColor(themeColor:"Dark1")] */ color:#000000; text-decoration:underline; } .ms-titlearealeft { /* [ReplaceColor(themeColor:"Accent3-Lightest")] */ background-color:#d6e8ff; } TD.ms-titleareaframe,Div.ms-titleareaframe,.ms-pagetitleareaframe{ background:url("/_layouts/images/bgximg.png") repeat-x -0px -461px; /* [ReplaceColor(themeColor:"Accent3-Lightest")] */ background-color:#d6e8ff; text-align:left; } div.ms-titleareaframe{ height:100%; } .ms-pagetitleareaframe table{ background-image:url("/_layouts/images/topshape.jpg"); background-repeat:no-repeat; background-position:332px 4px; height:54px; } .ms-titlearealine{ /* [ReplaceColor(themeColor:"Accent3-Medium")] */ background-color:#83b0ec; } .ms-titleareaframe table td.ms-titlearea,.ms-areaseparator table td.ms-titlearea,.ms-pagetitleareaframe table td.ms-titlearea{ padding:7px 0px 1px 0px; } .ms-sitemapdirectional,.ms-sitemapdirectional a{ unicode-bidi:embed; } .ms-areaseparatorcorner{ background-image:url("/_layouts/images/framecornergrad.gif"); background-position:left top; background-repeat:repeat-y; height:8px; /* [ReplaceColor(themeColor:"Accent5-Medium")] */ border-right:1px solid #6f9dd9; } td.ms-areaseparatorleft{ background:#d6e8ff url("/_layouts/images/bgximg.png") repeat-x -0px -461px; /* [ReplaceColor(themeColor:"Accent5-Medium")] */ border-right:1px solid #6f9dd9; height:100%; } div.ms-areaseparatorleft{ background-repeat:no-repeat; background-position:-143px 0px; /* [ReplaceColor(themeColor:"Accent5-Medium")] */ border-right:1px solid #6f9dd9; height:100%; } div.ms-areaseparatorright{ /* [ReplaceColor(themeColor:"Accent5-Medium")] */ border-left:1px solid #6f9dd9; padding-right:2px; height:100%; } .ms-titlearearight .ms-areaseparatorright{ background:#d6e8ff url("/_layouts/images/bgximg.png") repeat-x -0px -461px; /* [ReplaceColor(themeColor:"Accent5-Medium")] */ border-left:1px solid #6f9dd9; padding-right:2px; height:100%; } .ms-areaseparator{ /* [ReplaceColor(themeColor:"Accent4-Lightest")] */ background-color:#ffeaad; border-right:none; border-left:none; padding-left:5px; height:61px; } .ms-pagemargin{ background-color:#83b0ec; height:100%; } td.ms-rightareacell div.ms-pagemargin{ /* [ReplaceColor(themeColor:"Accent3-Medium")] */ background-color:#83b0ec; height:100%; /* [ReplaceColor(themeColor:"Accent3-Medium")] */ border-left:solid 1px #83b0ec; } .ms-bodyareacell{ vertical-align:top; } .ms-pagebottommargin,.ms-pagebottommarginleft,.ms-pagebottommarginright{ /* [ReplaceColor(themeColor:"Accent3-Medium")] */ background:#83b0ec; } .ms-bodyareapagemargin{ /* [ReplaceColor(themeColor:"Accent3-Medium")] */ background:#83b0ec; /* [ReplaceColor(themeColor:"Accent3-Lighter")] */ border-top:1px solid #6f9dd9; } .ms-bodyareaframe{ vertical-align:top; height:100%; /* [ReplaceColor(themeColor:"Light1")] */ background-color:#ffffff; /* [ReplaceColor(themeColor:"Accent3-Lighter")] */ border:1px solid #6f9dd9; } .ms-bodyareaframe{ padding:10px; } .ms-pagetitle{ /* [ReplaceColor(themeColor:"Dark1")] */ color:#000000; font-family:verdana; font-size:16pt; margin:0px 0px 4px 0px; font-weight:normal; } .ms-pagetitle a{ text-decoration:none; /* [ReplaceColor(themeColor:"Dark1")] */ color:#000000; margin:0; font-weight:normal; } .ms-pagetitle a:hover{ } .ms-vh table.ms-selectedtitle,.ms-vh2 table.ms-selectedtitle,.ms-vh-icon table.ms-selectedtitle,.ms-vh table.ms-unselectedtitle,.ms-vh2 table.ms-unselectedtitle,.ms-vh-icon table.ms-unselectedtitle{ height:21px; } .ms-vh table.ms-selectedtitle,.ms-vh2 table.ms-selectedtitle,.ms-vh-icon table.ms-selectedtitle{ /* [ReplaceColor(themeColor:"Light1-Lighter")] */ background-color:#dde1e5; border:none; } .ms-vh2 .ms-selectedtitle .ms-vb,.ms-vh2 .ms-unselectedtitle .ms-vb{ padding-left:5px; padding-right:5px; padding-top:1px; } .ms-vh-icon .ms-selectedtitle .ms-vb,.ms-vh-icon .ms-unselectedtitle .ms-vb{ padding-left:0px; vertical-align:middle; } .ms-propertysheet th.ms-vh2,.ms-propertysheet th.ms-vh2-nofilter{ font-family:tahoma; } .ms-listviewtable .ms-vh2,.ms-summarystandardbody .ms-vh2{ padding:1px 1px 0px 1px; } .ms-listviewtable .ms-vb2,.ms-summarystandardbody .ms-vb2{ padding-left:2px; padding-right:7px; } .ms-selectedtitle{ /* [ReplaceColor(themeColor:"Light1")] */ background-color:#ffffff; /* [ReplaceColor(themeColor:"Accent4-Darker")] */ border:1px solid #b09460; margin:0px; padding:0px; cursor:pointer; } .ms-selectedtitlealternative { /* [ReplaceColor(themeColor:"Light1")] */ background-color:#ffffff; /* [ReplaceColor(themeColor:"Accent4-Darker")] */ border:1px solid #b09460; margin:0px; padding:0px; cursor:pointer; } .ms-unselectedtitle{ background-color:transparent; margin:0px; padding:0px; } .ms-newgif{ display:inline-block; margin-left:5px; } .ms-menuimagecell{ /* [RecolorImage(themeColor:"Accent1",method:"Tinting")] */ background:url("/_layouts/images/selectednav.gif") repeat-x; /* [ReplaceColor(themeColor:"Accent6-Lighter")] */ background-color:#ffe6a0; cursor:pointer; /* [ReplaceColor(themeColor:"Light1")] */ border:solid 1px #ffffff; padding:0px; height:18px; } .ms-vh .ms-menuimagecell,.ms-vh2 .ms-menuimagecell,.ms-vh-icon .ms-menuimagecell{ height:20px; } .ms-vh .ms-menuimagecell img,.ms-vh2 .ms-menuimagecell img,.ms-vh-icon .ms-menuimagecell img{ margin-top:2px; margin-bottom:2px; } .ms-descriptiontext{ /* [ReplaceColor(themeColor:"Dark1-Medium")] */ color:#4c4c4c; font-family:tahoma; font-size:8pt; text-align:left; } .ms-statusdescriptiontext { color:#4c4c4c; background-color:#FFFF00; font-family:tahoma; font-size:8pt; text-align:left; } .ms-webpartpagedescription{ font-family:verdana; font-size:8pt; /* [ReplaceColor(themeColor:"Dark1-Lighter")] */ color:#5a5a5a; padding:8px 12px 0px 12px; } .ms-separator { /* [ReplaceColor(themeColor:"Light2",themeShade:"0.02")] */ color:#f1f1f2; background-repeat:repeat-x; border:none; padding-left:4px; font-size:10pt; } .ms-rtetoolbarmenu .ms-separator{ padding-left:0px !important; /* [ReplaceColor(themeColor:"Accent3-Medium")] */ color:#83b0ec; } .ms-separator img { height:12px; width:1px; margin:0px 1px 0px 1px; /* [ReplaceColor(themeColor:"Light2",themeShade:"0.02")] */ background:#f1f1f2; } .ms-propertysheet th.ms-authoringcontrols { /* [ReplaceColor(themeColor:"Accent3-Lightest")] */ background-color:#f1f1f2; text-align:left; } table.ms-authoringcontrols > tbody > tr > td{ vertical-align:middle; } td.ms-authoringcontrols > label,td.ms-authoringcontrols > span > label,td.ms-authoringcontrols > table > tbody > tr > td > label{ vertical-align:middle; } .ms-propertysheet th.ms-linksectionheader { /* [ReplaceColor(themeColor:"Dark1")] */ color:#000000; font-family:tahoma; font-size:8pt; font-weight:bold; text-align:left; } .ms-linksectionitemdescription{ padding-left:3px; padding-top:7px; } .ms-propertysheet .ms-sectionheader a,.ms-propertysheet .ms-sectionheader a:hover { /* [ReplaceColor(themeColor:"Dark1-Lighter")] */ color:#525252; text-decoration:none; } .ms-partline { height:3px; /* [ReplaceColor(themeColor:"Dark2",themeTint:"0.17")] */ border-bottom:1px solid #EBEBEB; } .ms-propertysheet{ font-family:verdana; font-size:1em; text-align:left; /* [ReplaceColor(themeColor:"Dark1-Medium")] */ color:#4c4c4c; } .ms-propertysheet th{ font-family:verdana; font-size:8pt; /* [ReplaceColor(themeColor:"Dark1-Medium")] */ color:#4c4c4c; font-weight:normal; } .ms-propertysheet a{ text-decoration:none; /* [ReplaceColor(themeColor:"Accent3-Darker")] */ color:#3966bf; } .ms-propertysheet a:hover{ text-decoration:underline; /* [ReplaceColor(themeColor:"Dark1")] */ color:#000000; } .ms-vh,.ms-vh2,.ms-vh-icon-empty,.ms-vhImage,.ms-vh2-nograd,.ms-vh3-nograd,.ms-vh2-nograd-icon,.ms-vh2-nofilter-icon,.ms-ph{ font-weight:normal; /* [ReplaceColor(themeColor:"Light1-Medium")] */ color:#b2b2b2; text-align:left; text-decoration:none; vertical-align:top; } .ms-vh-icon{ vertical-align:middle; } .ms-gb,.ms-gb2,.ms-gbload,.ms-vb-tall,.ms-vb-user,.ms-pb,.ms-pb-selected td{ /* [ReplaceColor(themeColor:"Dark1")] */ color:#000000; } .ms-gb a,.ms-gb2 a{ /* [ReplaceColor(themeColor:"Accent3")] */ color:#003399; } .ms-vh,.ms-vh2,.ms-vh-icon,.ms-vh-icon-empty,.ms-vhImage,.ms-gb,.ms-gb2,.ms-gbload,.ms-vb,.ms-vb2,.ms-vb-tall,.ms-vb-user,.ms-vh2-nograd,.ms-vh3-nograd,.ms-vh2-nograd-icon,.ms-vh2-nofilter-icon,.ms-pb,.ms-pb-selected,.ms-ph{ font-size:8pt; line-height:1.2; font-family:Verdana,Helvetica,sans-serif; } .ms-vh,.ms-vh2,.ms-vh2-nograd,.ms-vh3-nograd,.ms-vh2-nograd-icon,.ms-vh2-nofilter-icon,.ms-ph{ white-space:nowrap; } .ms-vh,.ms-vh2,.ms-vh-icon,.ms-vh2-nofilter-icon,.ms-viewheadertr .ms-vh-group,.ms-vh2-nograd,.ms-vh3-nograd,.ms-vh2-nograd-icon,.ms-ph,.ms-pickerresultheadertr{ background-repeat:repeat-x; padding-top:1px; padding-bottom:0px; } .ms-viewheadertr th{ padding-top:5px !important; } .ms-disc .ms-viewheadertr th.ms-vh2{ padding:1px 5px 0px 4px; } .ms-disc .ms-vh2 .ms-selectedtitle .ms-vb,.ms-disc .ms-vh2 .ms-unselectedtitle .ms-vb{ padding-left:4px; } th.ms-vh3-nograd{ width:12px; /* [ReplaceColor(themeColor:"Light1-Darker")] */ color:#949494; font-size:8pt; font-family:tahoma,sans-serif; } .ms-vh .ms-vh{ background-image:none; border-left:none; padding-left:1px; background-color:transparent; } .ms-vh2,.ms-ph{ padding:3px 8px 1px; } .ms-vh-div{ padding-top:5px; } .ms-vh-icon,.ms-vh2-nograd-icon,.ms-vh2-nofilter-icon{ width:12px; } .ms-vh-icon{ padding-left:6px; padding-right:4px; padding-bottom:3px; } .ms-vh-icon-empty{ width:0px; } .ms-vh a,.ms-vh a:visited,.ms-vh2 a{ /* [ReplaceColor(themeColor:"Dark1-Lightest")] */ color:#7f7f7f; text-decoration:none; } .ms-vh a:hover,.ms-vh2 a:hover{ text-decoration:underline; } .ms-imnImgTD { padding-right:2px; padding-bottom:5px; } .ms-vhltr .ms-imnImgTD { padding-right:2px; } .ms-vhrtl .ms-imnImgTD { padding-left:2px; } .ms-imnTxtTD { padding-top:0px; } .ms-vhImage{ width:18pt } .ms-standardheader{ font-size:1em; margin:0em; text-align:left; /* [ReplaceColor(themeColor:"Dark1")] */ color:#525252; } .ms-formlabel h3.ms-standardheader{ font-weight:normal; color:auto; } .ms-linksectionheader .ms-standardheader{ /* [ReplaceColor(themeColor:"Dark1")] */ color:#000000; } .ms-gb{ height:22px; /* [ReplaceColor(themeColor:"Light1")] */ background-color:#ffffff; font-weight:bold; /* [ReplaceColor(themeColor:"Accent3-Lighter")] */ border-bottom:1px solid #8ebbf5; /* [ReplaceColor(themeColor:"Light1-Lightest")] */ border-top:1px solid #f9f9f9; padding-bottom:3px; } .ms-gb .ms-vb2{ font-weight:normal; } .ms-listviewtable .ms-gb,.ms-listviewtable .ms-gb2{ padding-top:14px; } .ms-gb2{ height:22px; /* [ReplaceColor(themeColor:"Dark1-Medium")] */ color:#4c4c4c; padding-bottom:3px; /* [ReplaceColor(themeColor:"Accent3-Lightest")] */ border-bottom:1px solid #e3efff; /* [ReplaceColor(themeColor:"Light1-Lightest")] */ border-top:1px solid #f9f9f9; } .ms-gbload{ height:22px; /* [ReplaceColor(themeColor:"Dark1-Medium")] */ color:#4c4c4c; /* [ReplaceColor(themeColor:"Light1")] */ background-color:#ffffff; padding-bottom:3px; } .ms-vb,.ms-vb2,.ms-vb-user,.ms-vb-tall,.ms-pb,.ms-pb-selected { /* [ReplaceColor(themeColor:"Dark1")] */ color:#6d6f72; vertical-align:top; } .ms-vb a:link,.ms-vb2 a:link,.ms-vb-user a:link{ /* [ReplaceColor(themeColor:"Hyperlink")] */ color:#0072BC; text-decoration:none; } .ms-vb a:hover,.ms-vb2 a:hover,.ms-vb-user a:hover{ text-decoration:underline; } .ms-vb a:visited,.ms-vb2 a:visited,.ms-vb-user a:visited{ /* [ReplaceColor(themeColor:"Hyperlink")] */ color:#0072BC; text-decoration:none; } .ms-vb a:visited:hover,.ms-vb2 a:visited:hover,.ms-vb-user a:visited:hover{ /* [ReplaceColor(themeColor:"Hyperlink")] */ color:#0072BC; text-decoration:underline; } .ms-alternatingstrong .ms-vb a:link,.ms-alternatingstrong .ms-vb2 a:link,.ms-alternatingstrong .ms-vb-user a:link,.ms-alternatingstrong .ms-vb a:visited,.ms-alternatingstrong .ms-vb2 a:visited,.ms-alternatingstrong .ms-vb-user a:visited,.ms-alternatingstrong .ms-vb a:visited:hover,.ms-alternatingstrong .ms-vb2 a:visited:hover,.ms-alternatingstrong .ms-vb-user a:visited:hover{ /* [ReplaceColor(themeColor

    Read the article

  • Modify python USB device driver to only use vendor_id and product_id, excluding BCD

    - by Tony
    I'm trying to modify the Android device driver for calibre (an e-book management program) so that it identifies devices by only vendor id and product id, and excludes BCD. The driver is a fairly simply python plugin, and is currently set up to use all three numbers, but apparently, when Android devices use custom Android builds (ie CyanogenMod for the Nexus One), it changes the BCD so calibre stops recognizing it. The current code looks like this, with a simple list of vendor id's, that then have allowed product id's and BCD's with them: VENDOR_ID = { 0x0bb4 : { 0x0c02 : [0x100], 0x0c01 : [0x100]}, 0x22b8 : { 0x41d9 : [0x216]}, 0x18d1 : { 0x4e11 : [0x0100], 0x4e12: [0x0100]}, 0x04e8 : { 0x681d : [0x0222]}, } The line I'm specifically trying to change is: 0x18d1 : { 0x4e11 : [0x0100], 0x4e12: [0x0100]}, Which is, the line for identifying a Nexus One. My N1, running CyanogenMod 5.0.5, has the BCD 0x0226, and rather than just adding it to the list, I'd prefer to eliminate the BCD from the recognition process, so that any device with vendor id 0x18d1 and product id 0x4e11 or 0x4e12 would be recognized. The custom Android rom doesn't change enough for the specifics to matter. The syntax seems to require the BCD in brackets. How can I edit this so that it matches anything in that field?

    Read the article

  • Can get coordinates from iPhone simulator, but can't get coordinates from iPhone device

    - by iPhoneARguy
    Hi everyone, I've run into something of a mysterious bug (to me). I have some code to pick out the user's current location on the iPhone SDK. It works fine on the iPhone simulator, but when I try to run it on the actual device, I get a weird error. Here is the code (I am using ASIFormDataRequest to create a POST request): ASIFormDataRequest * request = [ASIFormDataRequest requestWithURL:url]; [request setPostValue:@"testauthor" forKey:@"author"]; [request setPostValue:[[NSNumber numberWithDouble:datum.location.coordinate.latitude] stringValue] forKey:@"latitude"]; NSLog(@"%f", datum.location.coordinate.latitude); NSLog(@"%f", datum.location.coordinate.longitude); [request setPostValue:[[NSNumber numberWithDouble:datum.location.coordinate.longitude] stringValue] forKey:@"longitude"]; [request setPostValue:datum.comment forKey:@"comment"]; On the simulator, NSLog does log both the latitude and longitude, but on the iPhone, it does not. Even stranger, when I go through with the debugger on the device, I try "po datum.location", I get <+###, -###> +/- 223.10m (speed 0.00 mps / course -1.00) @ 2010-05-02 22:18:37 -0400 (### replaced by my location) but when I do "(gdb) po datum.location.coordinate" I get: There is no member named coordinate. Do you guys have any idea why this might happen? Thanks in advance for your help!

    Read the article

  • AVAudioPlayer working in Simulator, but not on device

    - by cannyboy
    My mp3 playing code is: NSError *error; soundObject = [[AVAudioPlayer alloc] initWithContentsOfURL:[NSURL fileURLWithPath:audioPathString] error:&error]; if (soundObject == nil) NSLog(@"%@", [error description]); soundObject.delegate = self; soundObject.numberOfLoops = 0; soundObject.volume = 1.0; NSLog(@"about to play"); [soundObject prepareToPlay]; [soundObject play]; NSLog(@"[soundObject play];"); The mp3 used to play fine, and it still does on the simulator. But not on the device. I've recently added some sound recording code (not mine) to the software. It uses AudioQueue stuff which is slightly beyond me. Does that conflict with AVAudioPlayer? Or what could be the problem? I've noticed that as soon as the audiorecording code starts working, I can't adjust the volume on the device anymore, so maybe it blocks the audio playback?. EDIT The solution seems to be to put this in my code. I put it in applicationDidFinishLaunching: [[AVAudioSession sharedInstance] setCategory: AVAudioSessionCategoryPlayAndRecord error: nil]; UInt32 audioRouteOverride = kAudioSessionOverrideAudioRoute_Speaker; AudioSessionSetProperty (kAudioSessionProperty_OverrideAudioRoute,sizeof (audioRouteOverride),&audioRouteOverride); The first line allows both play and record, whilst the other lines apparently reroute things to make the volume louder. All audio code is voodoo to me.

    Read the article

  • Saving data - does work on Simulator, not on Device

    - by Peter Hajas
    I use NSData to persist an image in my application. I save the image like so (in my App Delegate): - (void)applicationWillTerminate:(UIApplication *)application { NSLog(@"Saving data"); NSData *data = UIImagePNGRepresentation([[viewController.myViewController myImage]image]); //Write the file out! NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES); NSString *documentsDirectory = [paths objectAtIndex:0]; NSString *path_to_file = [documentsDirectory stringByAppendingString:@"lastimage.png"]; [data writeToFile:path_to_file atomically:YES]; NSLog(@"Data saved."); } and then I load it back like so (in my view controller, under viewDidLoad): NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES); NSString *documentsDirectory = [paths objectAtIndex:0]; NSString *path_to_file = [documentsDirectory stringByAppendingString:@"lastimage.png"]; if([[NSFileManager defaultManager] fileExistsAtPath:path_to_file]) { NSLog(@"Found saved file, loading in image"); NSData *data = [NSData dataWithContentsOfFile:path_to_file]; UIImage *temp = [[UIImage alloc] initWithData:data]; myViewController.myImage.image = temp; NSLog(@"Finished loading in image"); } This code works every time on the simulator, but on the device, it can never seem to load back in the image. I'm pretty sure that it saves out, but I have no view of the filesystem. Am I doing something weird? Does the simulator have a different way to access its directories than the device? Thanks!

    Read the article

  • iPhone - UIViewController not rotating when device orientation changes

    - by Ryu
    I have got my own custom UIViewController, which contains a UIScrollView with an UIImageView as it's subview. I would like to make the image to auto rotate when device orientation changes, but it doesn't seem to be working... In the header file, I've got; @interface MyViewController : UIViewController <UIScrollViewDelegate> { IBOutlet UIScrollView *containerView; UIImageView *imageView; } These components are initialised in the loadView function as below; containerView = [[UIScrollView alloc] initWithFrame:frame]; NSData *data = [NSData dataWithContentsOfURL:[NSURL URLWithString:@"http://..."]]; UIImage *image = [[UIImage alloc] initWithData:data]; imageView = [[UIImageView alloc] initWithImage:image]; [image release]; [containerView addSubview:imageView]; And I have added the following method, assuming that's all I need to make the view auto-rotate... -(BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { return YES; } MyViewController loads fine with the image I've specified to grab from the URL, and the shouldAutorotate... function is being called, with the correct UIInterfaceOrientation, when I flip the device too. However, didRotateFromInterfaceOrientation method do not get called, and the image doesn't seem to rotate itself... Could someone please point out what I need to add, or what I have done wrong here? Thanks in advance!

    Read the article

  • iPad width in viewport settings overflowing past device width

    - by user1327771
    I am at my wit's end here, and I beseech the fine folks here at stackoverflow for help. I am working on a design for a blog for a friend of mine, and I'm working in HTML5. I am trying to get the width of the page to span the width of an iPad. So, in my document head, I have the following: <meta name="viewport" content="width=device-width, initial-scale=1.0, maximum-scale=1.0"> Now, if you go to the index page, on an iPad, it looks just fine. The width of the page spans the width of the iPad in portrait mode, as I expect it to: http://www.alanreuterart.com/femmegamers/index.html It also looks fine on any individual blog posts as well. However, on the "about" and "join" pages, the width does not do this. It's actually overflowing past the length of the iPad to the right. View the following page on an iPad to see what I mean: http://www.alanreuterart.com/femmegamers/about.html I've tried everything. I cannot, for the life of me, figure out how to get it those two pages to correctly span the device width of the iPad. One important note, though: before anyone tells me to set my viewport width to 960, I cannot do that because the pages have media queries in them to convert to a mobile layout for the iPhone and other mobile phones. (I am not making a special unique layout for the iPad.) Can ANYONE help out here? Thanks in advance! —Me.

    Read the article

  • How to Read Device Data From serial port

    - by Aamir Khurshid
    I have one device which sends data on COM port say on COM13. Now i want to read that data and display it in the RichTextBox or in any text control. I have written the application with the help of IO and IO.Ports but comport.DataRecived event does not fire, even though device is sending data on that port. I have some software on which i define the port number and it successfully display data, which insure me that data is receiving on the Port but i am unable to receive. Is there any way i can read data? comm.Parity = cboParity.Text;//None comm.StopBits = cboStop.Text;//One comm.DataBits = cboData.Text;//8 comm.BaudRate = cboBaud.Text;//9600 comm.DisplayWindow = rtbDisplay;//Null comm.PortName = "COM13"; comm.OpenPort(); cmdOpen.Enabled = false; cmdClose.Enabled = true; cmdSend.Enabled = true; public bool OpenPort() { if (comPort.IsOpen) { comPort.Close(); } comPort.DataReceived += new SerialDataReceivedEventHandler(comPort_DataReceived); comPort.PortName = _portName; comPort.Open();return true; }

    Read the article

  • Opening my application when a usb device is inserted on Windows using WMI

    - by rsteckly
    Hi, I'm trying to launch an event when someone plugs in a usb device. For now, I'm content to simply print something to the console (in the finished product, it will launch an application). This code is very loosely adapted from: http://serverfault.com/questions/115496/use-wmi-to-detect-a-usb-drive-was-connected-regardless-of-whether-it-was-mounted There's two problems: 1) I need to pass the argument to Management scope dynamically because this will be installed on computers I don't use or whose name I don't know. 2) I'm getting an invalid namespace exception when I call w.Start(); Any ideas what I'm doing wrong? static ManagementEventWatcher w=null; static void Main(string[] args) { AddInstUSBHandler(); for(;;); } public static void USBRemoved(object sneder, EventArgs e) { Console.WriteLine("A USB device inserted"); } static void AddInstUSBHandler() { WqlEventQuery q; ManagementScope scope = new ManagementScope("HQ\\DEV1"); scope.Options.EnablePrivileges=true; q=new WqlEventQuery(); q.EventClassName+="_InstanceCreationEvent"; q.WithinInterval=new TimeSpan(0,0,3); q.Condition=@"TargetInstance ISA 'Win32_USBControllerdevice'"; w=new ManagementEventWatcher(scope,q); w.EventArrived+=new EventArrivedEventHandler(USBRemoved); w.Start(); }

    Read the article

  • Flushing writes in buffer of Memory Controller to DDR device

    - by Rohit
    At some point in my code, I need to push the writes in my code all the way to the DIMM or DDR device. My requirement is to ensure the write reaches the row,ban,column of the DDR device on the DIMM. I need to read what I've written to the main memory. I do not want caching to get me the value. Instead after writing I want to fetch this value from main memory(DIMM's). So far I've been using Intel's x86 instruction wbinvd(write back and invalidate cache). However this means the caches and TLB are flushed. Write-back requests go to the main memory. However, there is a reasonable amount of time this data might reside in the write buffer of the Memory Controller( Intel calls it integrated memory controller or IMC). The Memory Controller might take some more time depending on the algorithm that runs in the Memory Controller to handle writes. Is there a way I force all existing or pending writes in the write buffer of the memory controller to the DRAM devices ?? What I am looking for is something more direct and more low-level than wbinvd. If you could point me to right documents or specs that describe this I would be grateful. Generally, the IMC has a several registers which can be written or read from. From looking at the specs for that for the chipset I could not find anything useful. Thanks for taking the time to read this.

    Read the article

  • TableLayout formatting loss after device rotation

    - by roundhill
    I'm seeing a strange issue with a TableLayout after the device is rotated from either orientation. If you load the view in either portrait or landscape mode, the table loads fine. But once you rotate the device, the columns collapse to just fit their width. I would expect that after rotation, the columns would still stretch to fit the width of the screen. Any ideas on what can be done to resolve this? Screenies and layout code below. Before Rotation: After Rotation: Table Layout: <TableLayout android:id="@+id/dataTable" android:layout_width="fill_parent" android:layout_height="fill_parent" android:layout_weight="1" android:layout_below="@id/chart" android:stretchColumns="*" android:shrinkColumns="*" android:padding="6dip" > </TableLayout> Table Row: <TableRow xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="fill_parent"> <TextView android:id="@+id/col1" android:layout_marginRight="2dip" android:textColorLink="#FF21759b" android:text="Column 1" android:padding="4dip" android:textColor="#FF464646"/> <TextView android:id="@+id/col2" android:text="Column 2" android:textColor="#FF464646" android:padding="4dip"/> </TableRow> Thanks!

    Read the article

  • SQL Compact performance on device

    - by Ben M
    My SQL Compact database is very simple, with just three tables and a single index on one of the tables (the table with 200k rows; the other two have less than a hundred each). The first time the .sdf file is used by my Compact Framework application on the target Windows Mobile device, the system hangs for well over a minute while "something" is done to the database: when deployed, the DB is 17 megabytes, and after this first usage, it balloons to 24 megs. All subsequent usage is pretty fast, so I'm assuming there's some sort of initialization / index building going on during this first usage. I'd rather not subject the user to this delay, so I'm wondering what this initialization process is and whether it can be performed before deployment. For now, I've copied the "initialized" database back to my desktop for use in the setup project, but I'd really like to have a better answer / solution. I've tried "full compact / repair" in the VS Database Properties dialog, but this made no difference. Any ideas? For the record, I should add that the database is only read from by the device application -- no modifications are made by that code.

    Read the article

  • Works on emulator but not on device

    - by Klaus
    Hello Community, I have an inner handler class that calls the method sendMessage. sendMessige is outside the handler class, but inside the conatining Android java class. On the emulator (AVD 2.2) it works fine, but on my Android 2.2 device the method sendMessage is not called at all. Inner handler class: private Handler handler2 = new Handler() { public void handleMessage(Message msg) { if (GeoSetting.equals("s") && (inNumber.equals(definedNumber))) **SendService.this.sendMessage(definedNumber, DisplayLoc)**; if (GeoSetting.equals("a")) **SendService.this.sendMessage(inNumber, DisplayLoc)**; stopService(new Intent(getApplicationContext(), GeoService.class)); }; The method that should be called: private void sendMessage(String sendNumber, String sendText){ Toast.makeText(getApplicationContext(), "done!!!", Toast.LENGTH_LONG).show(); SmsManager sms = SmsManager.getDefault(); try { sms.sendTextMessage(sendNumber, null, sendText, null, null); if (Message == true) {Toast.makeText(getApplicationContext(), "Sending SMS to "+sendNumber+": "+sendText, Toast.LENGTH_LONG).show();} } catch (Exception exeption){ Toast.makeText(getApplicationContext(), "Something is wrong, could not send SMS!", Toast.LENGTH_LONG).show(); } Toast.makeText(getApplicationContext(), "method called!", Toast.LENGTH_LONG).show(); } Does anybody have an idea why sendMessage is not called on the real device? Thank you for the help!

    Read the article

  • Running an application from an USB device...

    - by Workshop Alex
    I'm working on a proof-of-concept application, containing a WCF service with console host and client, both on a single USB device. On the same device I will also have the client application which will connect to this service. The service uses the entity framework to connect to the database, which in this POC will just return a list of names. If it works, it will be used for a larger project. Creating the client and service was easy and this works well from USB. But getting the service to connect to the database isn't. I've found this site, suggesting that I should modify machine.config but that stops the XCopy deployment. This project cannot change any setting of the PC, so this suggestion is bad. I cannot create a deployment setup either. The whole thing just needs to run from USB disk. So, how do I get it to run? (The service just selects a list of names from the database, which it returns to the client. If this POC works, it will do far more complex things!)

    Read the article

  • MidiSystem.getSequencer() returns Audio Device Unavailable

    - by ksemeks
    I've keep having an exception thrown, on and on. When i try to make a new Sequencer object, i keep getting the javax.sound.midi.MidiUnavailableException: Audio Device Unavailable exception. So, here's the code: import javax.sound.midi.*; public class MiniMusicPlayer1 { public static void main(String[] args) { try { Sequencer sequencer = MidiSystem.getSequencer(); sequencer.open(); Sequence seq = new Sequence(Sequence.PPQ, 4); Track track = seq.createTrack(); for (int i = 5; i < 61; i += 4) { track.add(makeEvent(144, 1, i, 100, i)); track.add(makeEvent(128, 1, i, 100, (i+2))); } sequencer.setSequence(seq); sequencer.setTempoInBPM(220); sequencer.start(); } catch (Exception e) { e.printStackTrace(); } } public static MidiEvent makeEvent(int comd, int chan, int one, int two, int tick) { MidiEvent event = null; try { ShortMessage a = new ShortMessage(); a.setMessage(comd, chan, one, two); event = new MidiEvent(a, tick); } catch (Exception e) { e.printStackTrace(); } return event; } } And here's the complete error (at compile): javax.sound.midi.MidiUnavailableException: Audio Device Unavailable at com.sun.media.sound.MixerSynth.implOpen(MixerSynth.java:165) at com.sun.media.sound.AbstractMidiDevice.doOpen(AbstractMidiDevice.java:144) at com.sun.media.sound.AbstractMidiDevice.openInternal(AbstractMidiDevice.java:134) at com.sun.media.sound.AbstractMidiDevice.getReceiverReferenceCounting(AbstractMidiDevice.java:339) at javax.sound.midi.MidiSystem.getReceiver(MidiSystem.java:243) at javax.sound.midi.MidiSystem.getSequencer(MidiSystem.java:442) at javax.sound.midi.MidiSystem.getSequencer(MidiSystem.java:348) at MiniMusicPlayer1.main(MiniMusicPlayer1.java:9) First i was unable to play MIDI files on my pc, but then i got it to work, so now i can play MIDI files, that's okay. I tried even to close every process which uses my sound card, but the error is still there. Anyone can help me?

    Read the article

  • Fake location for the device (custom)

    - by AtomRiot
    I know there are a few apps out there to fake a devices location but specifically what i want to do is use a location grabbed from a url. What direction should I look for setting the location on the device. The scenario i have is a jailbroken Wi-Fi iPad tethered to a nexus one. The nexus one would host a background service that when a request is recieved, it would respond with gps data of its current location. The jailbroken ipad would have a background service that either updated the location on a time interval, or on a per request basis (depending on how i have to implement it) by submitting a request to the tethered nexus one service. That data would then be set on the ipad and an application requesting location would get the service data. The goal is to recreate the location faker app's functionality with the exception of the spoofed location comes from the nexus ones gps via the service but i have not yet found out how to set the location data for the device. I can ofcourse implement this in a per app basis but it would be awesome to have any app be able to use it.

    Read the article

  • In 10.10, USB 3.0 PCI Express card recognized by lspci but not lsusb or dmesg. How to fix?

    - by Paul
    Asus N PC, runs 10.10 x86_64 The Asus N comes with 4 usb 2.0 ports, each labelled 2.0 on the case. Attempting to add two usb 3.0 ports to be provided by a generic usb 3.0 pci express card installed in the pci expres slot. The new card says usb 3.0 and has the blue ports. The card is installed into the laptop unpowered, then the laptop is powered on and boots normally. Nothing happens when a USB 3.0 flash drive is inserted into the usb 3.0 port. uname -a Linux drpaulbrewer-N90SV 2.6.35.8 #1 SMP Fri Jan 14 15:54:11 EST 2011 x86_64 GNU/Linux lspci -v 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64 Kernel modules: sis-agp 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fa000000-fdefffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Capabilities: [d0] Express Root Port (Slot+), MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [f4] Power Management version 2 Capabilities: [70] Subsystem: Silicon Integrated Systems [SiS] PCI-to-PCI bridge Kernel driver in use: pcieport 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01) Flags: bus master, medium devsel, latency 0 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 128 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at ffe0 [size=16] Capabilities: [58] Power Management version 2 Kernel driver in use: pata_sis 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 20 Memory at f9fff000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 21 Memory at f9ffe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 22 Memory at f9ffd000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter (rev 02) Subsystem: ASUSTeK Computer Inc. Device 11f5 Flags: bus master, medium devsel, latency 0, IRQ 19 Memory at f9ffcc00 (32-bit, non-prefetchable) [size=128] I/O ports at cc00 [size=128] Capabilities: [40] Power Management version 2 Kernel driver in use: sis190 Kernel modules: sis190 00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 17 I/O ports at c800 [size=8] I/O ports at c400 [size=4] I/O ports at c000 [size=8] I/O ports at bc00 [size=4] I/O ports at b800 [size=16] I/O ports at b400 [size=128] Capabilities: [58] Power Management version 2 Kernel driver in use: sata_sis Kernel modules: sata_sis 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: fdf00000-fdffffff Capabilities: [b0] Subsystem: Silicon Integrated Systems [SiS] Device 0004 Capabilities: [c0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Root Port (Slot+), MSI 00 Capabilities: [f4] Power Management version 2 Kernel driver in use: pcieport 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=06, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fe000000-febfffff Prefetchable memory behind bridge: 00000000f6000000-00000000f8ffffff Capabilities: [b0] Subsystem: Silicon Integrated Systems [SiS] Device 0004 Capabilities: [c0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Root Port (Slot+), MSI 00 Capabilities: [f4] Power Management version 2 Kernel driver in use: pcieport 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller Subsystem: ASUSTeK Computer Inc. Device 17b3 Flags: bus master, medium devsel, latency 0, IRQ 18 Memory at f9ff4000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce GT 130M] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 2021 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fc000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fa000000 (64-bit, non-prefetchable) [size=32M] I/O ports at dc00 [size=128] [virtual] Expansion ROM at fde80000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Kernel driver in use: nvidia Kernel modules: nvidia-current, nouveau, nvidiafb 02:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Device 1a3b:1067 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fdff0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Kernel driver in use: ath9k Kernel modules: ath9k 03:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at febfe000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable- Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 lsusb Bus 003 Device 002: ID 0b05:1751 ASUSTek Computer, Inc. BT-253 Bluetooth Adapter Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader Bus 001 Device 002: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub dmesg trying to post dmesg exceeded the stackexchange posting limit of 30K... but nothing there is usb 3.0

    Read the article

  • Wireless Connected But No Internet Connection (Ubuntu 12.04)

    - by Zxy
    I am using same network for 2 days and everything was normal. However, today even though it shows me as connected to the network, I do not have internet connection. If I use ethernet cable instead of wireless, I am still able to connect to the internet. Also my friends are able to connect to the wireless network and they can get internet connection. I did not update or install anything since yesterday. Therefore I do not have any idea why it is happening. Here is some information about my connection: I will be appreciate to any kind of help. root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 hid 77367 2 hid_logitech_dj,usbhid ideapad_laptop 17890 0 sparse_keymap 13658 2 acer_wmi,ideapad_laptop lib80211_crypt_tkip 17275 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event wl 2646601 0 wmi 18744 1 acer_wmi i915 414672 3 drm_kms_helper 45466 1 i915 snd_timer 28931 2 snd_pcm,snd_seq mac_hid 13077 0 snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq lib80211 14040 2 lib80211_crypt_tkip,wl drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 snd 62064 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_se q,snd_timer,snd_seq_device video 19068 1 i915 mei 36570 0 soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp atl1c 36718 0 root@ghostrider:/etc/resolvconf# nm-tool NetworkManager Tool State: connected (global) - Device: eth1 [PoliTekno] ---------------------------------------------------- Type: 802.11 WiFi Driver: wl State: connected Default: yes HW Address: AC:81:12:7F:6B:B2 Capabilities: Speed: 54 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) CnDStudios: Infra, 00:12:BF:3F:0A:8A, Freq 2412 MHz, Rate 54 Mb/s, Strength 85 WPA AIR_TIES: Infra, 00:1C:A8:6E:84:32, Freq 2462 MHz, Rate 54 Mb/s, Strength 72 WPA2 VKSS: Infra, 00:E0:4D:01:0D:47, Freq 2452 MHz, Rate 54 Mb/s, Strength 62 WPA2 PROGEDA: Infra, 00:1A:2A:60:BF:61, Freq 2462 MHz, Rate 54 Mb/s, Strength 47 WPA MobilAtolye: Infra, 72:2B:C1:65:75:3C, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 AIRTIES_WAR-141: Infra, 00:1C:A8:AB:AA:48, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 tilda_biri_yeni: Infra, 54:E6:FC:B0:3C:E9, Freq 2437 MHz, Rate 0 Mb/s, Strength 34 WEP *PoliTekno: Infra, 00:16:E3:40:C3:E4, Freq 2462 MHz, Rate 54 Mb/s, Strength 100 WPA2 AIRTIES_RJY: Infra, 00:1A:2A:BD:85:16, Freq 2462 MHz, Rate 54 Mb/s, Strength 55 WEP IPv4 Settings: Address: 0.0.0.0 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: F0:DE:F1:6C:90:65 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: off root@ghostrider:/etc/resolvconf# sudo iwlist scan lo Interface doesn't support scanning. eth1 Scan completed : Cell 01 - Address: 00:16:E3:40:C3:E4 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-48 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 02 - Address: 00:E0:4D:01:0D:47 ESSID:"VKSS" Mode:Managed Frequency:2.452 GHz (Channel 9) Quality:4/5 Signal level:-64 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Cell 03 - Address: 00:1C:A8:AB:AA:48 ESSID:"AIRTIES_WAR-141" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-77 dBm Noise level:-95 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: DDB20050F204104A0001101049001E007FC5100018DE7CF0D8B70223A62711C18926AC290E30303030303139631044000102103B0001031047001076B31BC241E953CB99C3872554425A28102100194169725469657320576972656C657373204E6574776F726B73102300074169723534343010240008312E322E302E31321042000F4154303939313131383030323832351054000800060050F20400011011000741697235343430100800020084103C000103 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 04 - Address: 72:2B:C1:65:75:3C ESSID:"MobilAtolye" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-78 dBm Noise level:-92 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK IE: Unknown: DDA20050F204104A0001101044000102103B00010310470010BC329E001DD811B28601722BC165753C1021001D48756177656920546563686E6F6C6F6769657320436F2E2C204C74642E1023001C48756177656920576972656C6573732041636365737320506F696E74102400065254323836301042000831323334353637381054000800060050F204000110110009487561776569415053100800020084103C000100 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s 18 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 12 Mb/s 24 Mb/s; 48 Mb/s Cell 05 - Address: 00:12:BF:3F:0A:8A ESSID:"CnDStudios" Mode:Managed Frequency:2.412 GHz (Channel 1) Quality:5/5 Signal level:-47 dBm Noise level:-95 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 06 - Address: 00:1C:A8:6E:84:32 ESSID:"AIR_TIES" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-56 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 07 - Address: 54:E6:FC:B0:3C:E9 ESSID:"tilda_biri_yeni" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-85 dBm Noise level:-99 dBm Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 12 Mb/s; 24 Mb/s; 36 Mb/s; 9 Mb/s; 18 Mb/s 48 Mb/s; 54 Mb/s Cell 08 - Address: 18:28:61:16:57:C3 ESSID:"obilet" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-88 dBm Noise level:-99 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 09 - Address: 00:1A:2A:60:BF:61 ESSID:"PROGEDA" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:2/5 Signal level:-75 dBm Noise level:-98 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s eth0 Interface doesn't support scanning.

    Read the article

  • Driver denied access to PCI card

    - by Corin
    We wrote a Windows device driver to access our custom PCI card. The driver uses CreateFile to get a handle to the card. We recently had trouble at one installation were the card appeared to stop working. We tried replacing the card (the replacement appeared not work either). The computer vendor replaced the motherboard and both cards still failed to work. We put the cards in a different computer and both worked fine. We now have the computer at our office for examination. The Windows Device Manager lists our card in Other Devices as usual and says it's working fine. However, our driver initialization fails when it attempts to connect to the card. We created a test version of our driver with some extra debugging and determined that CreateFile is failing. It returns INVALID_HANDLE_VALUE as it is supposed to on failure. GetLastError indicates the error is Access is Denied. Since we're logged into the system as a local administrator, what can deny access to the device?

    Read the article

  • How do I get an Enter USB TV Box TV tuner aka Gadmei UTV302 to work?

    - by Subhash
    Has anyone had any success in using the Enter USB TV Box from Enter Multimedia? It comes bundled with software that works in Windows. I have had no luck using it in Ubuntu 10.10. Update 1 Here is the output from lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 004 Device 002: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 006: ID 1f71:3301 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub I can't find the Enter USB TV Box listed in this. In the dmesg tail command, I found something that seems to be related to the card: usb 1-5: new high speed USB device using ehci_hcd and address 6 usb 1-5: config 1 interface 0 altsetting 1 bulk endpoint 0x83 has invalid maxpacket 256 Update 2 From Windows I learned that this USB TV tuner uses some chipset from Gadmei corporation. All computer stores in India sell Enter USB TV Box if you ask for an USB TV tuner. No other brand seems to be interested in this market. Update 3 I learned that this TV tuner is rebranded version of Gadmei UTV302 (USB TV Tuner Box). Update 4 I tried adding em28xx as the chipset (as suggested by user BOBBO below) for the tuner but that did not work. I went back to my Pinnacle PCTV internal card. I don't think the tuner referred by UbuntuForums (Gadmei UTV 330) and the tuner that I have (Gadmei UTV 302) are the same. My USB tuner is several times bigger. My tuner seems to be a newer device with a newer tuner chip. I will submit details of this device to the LinuxTV developers this weekend. Update 5 I opened the tuner box and found that it uses a tuner from a Chinese company - Tenas. Model is TNF 8022-DFA. Update 6 Tuner chip specs (retrived from supplier directory) for Tenas TNF 8022-DFA. Supply voltage: true 5V device(low power dissipation) Control system: I2C bus control of tuning, address selection Tuning system: PLL controlled tuning Receiving system: system PAL D/K,IF(Intermediate Frequency): 38MHz Receiving channels: full frequency range from channel DS1 (49.75MHz) to channel DS57 (863.25MHz); Use Texas Instruments SN761678 IC solution, with mini install size Update 7 Reverse side of the circuit board. Picture of the TV tuner

    Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >