Search Results

Search found 2178 results on 88 pages for 'directors cut'.

Page 64/88 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

  • Why isn't my phone charging with some micro usb cables?

    - by Jacxel
    I ordered 3 microUSB cables over ebay. My phone was at about 50% battery and I wanted to use it as a hot spot for some browsing on my laptop, so I plugged it in, a charging icon appeared on the phone, my laptop showed it as a connected usb device and so I went about my business. About 30 minutes later I checked the phone and to my dismay saw 45% battery. But ahh, I thought, I have been putting the poor little thing under too much pressure, acting as a WiFi hotspot must drain the battery quicker than it can charge via usb, perhaps even using my laptops usb port wouldn't output enough power. Unscathed I continued on and when I was going to bed I plugged the usb cable into a mains adapter and switched everything battery consuming off and content, went to sleep. The next morning I was awoken by my phones alarm which got cut off unexpectedly. I attempted to unlock my phone which showed no more signs of life. Why isn't my phone charging with these new USB cables? For clarity: They transfer data with no problems The phone appears to be charging, showing all the signs and lights it normally would, the cable that came with the phone works as you would expect, so its not a fault with the phone, I think they slow the discharging of the phone, but I could be wrong. Are these just bad quality cables? Is there a way to fix this issue?

    Read the article

  • terminal-window viewer for tab-delimited files in *nix?

    - by khedron
    I work with a lot of tab-delimited data files, with varying columns of uncertain length. Typically, the way people view these files is to bring them down from the server to their Windows or Mac machine, and then open them up in Excel. This is certainly fully-featured, allowing filtering and other nice options. But sometimes, you just want to look at something quickly on the command line. I wrote a bare-bones utility to display the first<n>lines of a file like so: --- line 1 --- 1:{header-1} 2:{header-2} 3:... --- line 2 --- 1:{data-1} 2:{data-2} 3:... This is, obviously, very lame, but it's enough to pipe through grep, or figure out which header columns to use "cut -f" on. Is there a *nix-based viewer for a terminal session which will display rows and columns of a tab-delimited file and let you move the viewing window over the file, or otherwise look at data? I don't want to write this myself; instead, I'd just make a reformatter which would replace tabs with spaces for padding so I could open the file up in emacs and see aligned columns. But if there's already a tool out there to do something like this, that'd be great! (Or, I could just live with Excel.)

    Read the article

  • Connecting a laptop to a TV via HDMI

    - by Madmartigan
    I just bought a new Dell XPS17 laptop (Win7) that only has HDMI output. My last 2 laptops had VGA, which I used to connect to my Sony Bravia 32" TV with no issues, but with the HDMI it's been quite a headache. Drivers for display adapters have been updated to the latest versions: Intel(R) HD Graphics Family NVIDIA GeForce GT 550M I went to a store and plugged in to 4 different TVs from different manufacturers. A sales rep and I spent about 30 minutes being baffled by the results (which are the same as my current TV): Extreme buggy behavior in the Nvidia and Windows display/resolution control panel Can not extend or duplicate displays, can only select one Third and fourth output devices "randomly" detected by the Windows control panel Could not get the screen to fit the output (edges cut off on all sides by about a half inch) Resolution and colors less than perfect. Artifacts around text. Display "randomly" cuts out Defaults to TV output only when plugged in Can not change resolution on either device when connected No audio from the TV Plugged in to 3 monitors from different manufacturers: Defaults to duplicated displays when plugged in Everything works perfectly So far, four people have gone through all the settings in the latop with no luck. I had similar, but not exactly matching results with a different laptop. I'm using the Sony Bravia currently at home, but in order to get it to work I have to turn on the laptop, wait until the display shows up on it, close the lid, then cycle through each output channel on the TV until I come back around to the HDMI port again, but still I have the symptoms described above. However: Once in a while, it just works. Sometimes, seemingly randomly, the output fits the screen perfectly. Sometimes the audio comes through the speakers too, but not always. Usually my screen saver "Mystify" will come up with a message that it cannot be displayed due to a limitation of the video card, but then sometimes it works fine. These 3 things seem to be independent of each other and don't always happen together. So, is there any way to get the laptop to output correctly to a TV, or is it just not meant to be?

    Read the article

  • Delete on windows vista and seven -- discovery process

    - by M'vy
    Hi SUs! I've recently encountered a problem. Using svn at work I needed to clear some space. As you may know svn directories are full of sub-directories and files. So the delete process begins with a step of discovering the items to be deleted (I guess this is for displaying the progress bar). But in my case it ended up to be still running after I watched Braveheart (Off-topic: good film in my opinion. On-topic: and it last 2h50) and counting 440 000+ files. I finally decided to cut off the process and use the good old cmd with a del <directory> to do the job. (Done in some minutes) So I'm wondering if someone know how to override the system to make it actually begins the process while scanning the other items? At the end, I just want the file to be deleted and I don't care the number of files to be deleted. On the contrary I care about the time it takes. Thanks

    Read the article

  • Is Ubuntu a viable replacement of Windows XP for small enterprise environments?

    - by Alex. S.
    Hi all, I'm a newbie systems administrator, so any advice would be great. I would like to setup ubuntu 8.04 lts in a small office of consulting in management (around 50 workstations) instead of Windows XP. I would install MS Office 2007 via WINE (*). It would be a fresh installation, so the migration would be less of a pain. The new setup would also include a small server as document repository and a backup server by now. Later, I would install another goodies like a IM server, a document management solution, and whatnot collaborative tool. What do you advice in this scenario? Do you think is viable? Should I try to convince my managers this is a good idea? I consider myself as a fair experienced user in both systems, and I'm the only guy in charge of everything. I need to cut costs down, and I think that antivirus and antimalware software are a waste of money and time. Is this good idea?, or should I resign and try to lock down the Windows systems and install AV software? Is there anything else in this setup I'm not foreseeing? (*) The only catch in my test machine until now had been that Office SmartArt doesn't work properly, the rest of Office 2007 may seem ok.

    Read the article

  • In a Shell scripts, check version of installed package, make a decision based on output

    - by DJDarkViper
    Looking to write a cross distro / cross version shell script that makes sure a forced version of PHP is installed Example: Ubuntu 12.04 has 5.3, Ubuntu 13.10 has 5.5, Debian 7 has 5.4 I need this script, when run on a distro that has an old version of PHP, to update the repo to point to a package for 5.4, and if the distro has too new of a version, can downgrade to 5.4 appropriately. Im still not entirely comprehensive of Shell/Terminals technical limit of what you can do with it, but ill be perfectly frank that im still not totally used to existing tools The best I can think at the moment is: php -v | grep "PHP 5" but that returns a bunch of potentially changeable granular characters (PHP 5.4.4-14+deb7u5 (cli) (built: Oct 3 2013 09:24:58) ). Im not sure what to pipe to after this to extract out the characters im interested in Im not sure if im being totally clear, im not sure how to ask this.. Basically, in an automated shell script for Linux distros, how do I extract the PHP version (and just the PHP version number preferably) and make a decision based on that output EDIT This line ended up doing pretty dang good php -v | grep "PHP 5" | sed 's/.*PHP \([^-]*\).*/\1/' | cut -c 1-3 Bit long in the tooth, but gives me "5.3", "5.4", and "5.5" which is exactly what I need to work with

    Read the article

  • SWATCH - what am I doing wrong?

    - by Brian Dunbar
    What I want/need/desire is to log when a user logs into my FTP server. Problem: I can't make swatch work the way I should be able to. This data is logged to a file - but of course these logs are not kept very long. I can't keep the logs around forever, but I can extract data from then, analyze it, store results elsewhere. If there is a better way to do this than the following, I'm all ears. Swatch version 3.2.3 Perl 5.12 FTP: VSFTP OS (Test): OS X 10.6.8 OS (Production): Solaris From man I see I can pass contents to a command .. so I should be able to echo those values to file, do a sed/cut/uniq thing on them for stats. $ man swatch (snip) exec command Execute command. The command may contain variables which are substituted with fields from the matched line. A $N will be replaced by the Nth field in the line. A $0 or $* will be replaced by the entire line. Swatch file .swatchrc watchfor /OK LOGIN/ echo=red pipe "echo "0: $0 1:$1 2:$2 3:$3 4:$4 5:$5" >> /Users/bdunbar/dev/ftplog/output.txt" Launch with $ swatch -c /Users/bdunbar/.swatchrc --script-dir /Users/bdunbar/dev/ftplog -t /Users/bdunbar/dev/ftplog/vsftpd.log & Test echo "Mon July 9 03:11:07 2012 [pid 14938] [aetech] OK LOGIN: Client "206.209.255.227"" >> vsftpd.log Results - it's echoing to TTY. This is not needed or desired on the server, but it does tell me things are working. ftplog *** swatch version 3.2.3 (pid:25780) started at Mon Jul 9 15:23:33 CDT 2012 Mon July 9 03:11:07 2012 [pid 14938] [aetech] OK LOGIN: Client 206.209.255.227 Results - bad! I appear to not be sending the variables to text. $ tail -f output.txt 0: /Users/bdunbar/dev/ftplog/.swatch_script.25780 1: 2: 3: 4: 5:

    Read the article

  • What is the fastest way to clone an INNODB table within the same server?

    - by Vic
    Our development server is a replication slave of our production server. We have a script that developers use if they want to run their applications/bug fixes against fresh data. That script looks like this: dbs=( analytics auth logs users ) server=localhost conn="-h ${server} -u ${username} --password=${password}" # Stop the replication client so we don't encounter weird data. echo "STOP SLAVE" | mysql ${conn} # Bunch of bulk insert optimizations echo "SET autocommit=0" | mysql ${conn} echo "SET unique_checks=0" | mysql ${conn} echo "SET foreign_key_checks=0" | mysql ${conn} # Restore all databases and tables. for sourcedb in ${dbs[*]} do destdb=${prefix}${sourcedb} echo "Dropping database ${destdb}..." echo "DROP DATABASE IF EXISTS ${destdb}" | mysql ${conn} echo "CREATE DATABASE ${destdb}" | mysql ${conn} # First, all the tables. for table in `echo "SHOW FULL TABLES WHERE Table_type <> 'VIEW'" | mysql $conn $sourcedb | tail -n +2`; do if [[ "${table}" != 'BASE' && "${table}" != 'TABLE' && "${table}" != 'VIEW' ]] ; then createTable=`echo "SHOW CREATE TABLE ${table}"|mysql -B -r $conn $sourcedb|tail -n +2|cut -f 2-` echo "Restoring ${destdb}/${table}..." echo "$createTable ;" | mysql $conn $destdb insertData="INSERT INTO ${destdb}.${table} SELECT * FROM ${sourcedb}.${table}" echo "$insertData" | mysql $conn $destdb fi fi done done echo "SET foreign_key_checks=1" | mysql ${conn} echo "SET unique_checks=1" | mysql ${conn} echo "COMMIT" | mysql ${conn} # Restart the replication client echo "START SLAVE" | mysql ${conn} All of these operations are, as I mentioned, within the same server. Is there a faster way to clone the tables I'm not seeing? They're all INNODB tables. Thanks!

    Read the article

  • Fill down in Excel, but based on multiple values

    - by Jenn D.
    I have spreadsheets (not created by me) that have blank entries in one column where they should really have data. I want to take every empty cell and fill it with the nearest value above it. I'm looking for as little manual intervention as possible, because I'll have to do it repeatedly. I thought some previous version of Excel, or maybe another spreadsheet from the distant past, would do this by default -- that is, if you selected the column with foo and bar, and chose the equivalent of "fill down", you would get what's in the WANT column. What I actually get in Excel is the GET column. HAVE: WANT: GET: foo 1 foo 1 foo 1 2 foo 2 foo 2 bar 1 bar 1 foo 1 2 bar 2 foo 2 3 bar 3 foo 3 I'm worried that this might need a macro to be done properly. I used to be a whiz with Excel macros, and then suddenly they were all in VB. My fallback position will be to dump the whole thing to CSV and write a Python script, but if there's any way to do it in Excel that would be much preferable. Even if it involves a couple of different manual steps, that's fine; just not one step per group of lines. That is, a process of "copy the column, do X to it, cut and paste it back" would work, but "do X for each occurrence of foo or bar" won't. The files are too big for that. Any thoughts are appreciated!

    Read the article

  • Configuring MySQL for Power Failure

    - by Farrukh Arshad
    I have absolutely no experience with databases and MySql. Now the problem is I have an embedded device running a MySQL database with a web based application. The problem is when I shutdown my embedded device it just cut off the power, and I can not have a controlled shutdown. Given this situation how can I configure MySql to prevent it from failures and in case of a failure, I should have maximum support to recover my database. While searching this, I came across InnoDB Engine as well as some configuration options to set like sync_binlog=1 & innodb_flush_log_at_trx_commit=1. I have noticed my default Engine is InnoDB and binary logs are also enabled. What are other configurations to make for best possible failure & recovery support. Updated: I will be using InnoDB engine which supports Transactions. My question is how best I can configure it (InnoDB + MySQL) so that it can provide best possible fail-safe as well as crash recovery mechanism. One configuration option I came across is to enable binary logging which InnoDB uses at the time of recovery. Regards, Farrukh Arshad

    Read the article

  • VBA Solution to VLOOKUP with Hyperlinks

    - by Emily2
    I am looking for some help with a VBA solution for preserving hyperlinks when using VLOOKUP on Excel (2010). I have a load of data on Sheet 1 for internal use only, and a cut-down version of this on Sheet 2. Instead of recreating Sheet 2 everytime, I am looking to have a working version which updates everytime Sheet1 is updated. Thus, I have used VLOOKUP on Sheet 2 so that only the desired info is returned on sheet 2. However, the problem was that sheet 1 contained in many cells Hyperlinks to external websites, and this would not pull through to Sheet2 using VLOOKUP. With some help, however, using the following VBA solution the hyperlinks now pull through: Function GetHyperLink(r As Range) As String If r.Hyperlinks.Count Then GetHyperLink = r.Hyperlinks(1).Address End If End Function And I am using the following formula in the relevant cell(s) in Sheet2: =HYPERLINK(GetHyperLink(INDEX('Sheet 1'!$B$1:$B$10001,MATCH(A4,'Sheet 1'!$A$1:$A$10001,0))),(VLOOKUP(A4,'Sheet 1'!$A$1:$B$10001,2,FALSE))) However, the problem is with formatting: every cell on Sheet2 is formatted blue and underlined, even although some of them do not contain a hyperlink! Is someone able to help with a VBA solution/formula to fix this last piece of the puzzle? Many thanks, in anticipation.

    Read the article

  • How to configure default text selection behavior in Windows XP, 7? (eg. mouse click selects entire word vs. mouse click inserts an active cursor)

    - by Mouse of Fury
    I find the mouse click behavior of Windows XP and Windows 7 annoying and intrusive. I don't remember Windows NT being quite this bad, or MacOS 7 - 10 which I used in the nineties. When I'm using a browser and I click on a text field - for example, the address bar, or a search box - the first thing which happens is the entire field is selected.Subsequent clicks seem to select parts of words, often deciding arbitrarily to exclude or include adjacent punctuation. The same in Excel and other apps, and when trying to rename files, so I'm assuming this behavior comes from a system-wide text handling routine. I frequently want to edit text, cut out or replace odd parts of the insides of words or chunks of sentences, and often find that to get a simple cursor to insert I have to click the mouse up to 4 times in succession. I've had to do a lot of this recently and it has been driving me insane. Is there a place at the system level where this can be configured? In a perfect world, I'd like a single click on a new text area to insert a cursor point, and a rapid double click to select the entire area. Words or text within the area could be selected by inserting a cursor, holding down the mouse button and dragging to the exact point where I want the selection to end - even if that's in the middle of a word. No, I don't need or want Windows to "smart select" a word or sentence for me. I've looked in the Mouse and Accessibility Options control panels (Windows XP). Haven't found anything even close. Thanks -

    Read the article

  • Win7 'locking' process/files/folders?

    - by Dynde
    I've had a fair bit problems with sometimes files/folders/processes being 'locked' by Windows. The weird thing is, it's not like the traditional sense, I think, where tools like UnlockIT and wholockme would work. It seems that just giving it a little often helps - making me think it could either be the HDD, the memory, or something in Windows. A scenario: I go into a folder - don't open anything at all, go back up, cut or drag-move the folder to someplace else, it says "Action can't be completed because the folder or a file in it is open in another program". Waiting sometimes 20 seconds sometimes a little longer, and I can move it. Another scenario is deleting a bunch of files in a folder, and it appears that everything is gone, but then suddenly after a few seconds an .exe file pops back up, and I can't delete it. Waiting a few minutes, then pressing refresh and it's gone. I have the strangest feeling that there's a problem with either HDD or memory. I already tried disabling Windows indexing service with no luck. Does anyone have any ideas? EDIT: I should say, that I have a very fast system, 16 GB DDR3 RAM, i7-2600k CPU, SSD main HDD, so I really should not be experiencing any sort of problems, where one might say that it's "reasonable" for the system not to respond right away. Edit2: And I updated SSD firmware a couple months ago, so it shouldn't be bad release FW either

    Read the article

  • Some of my keys are automatically being pressed along with other keys

    - by Santosh
    History The last time when my computer shutdown was a power failure. Now some keys are automatically being pressed when I type something. The last thing I did to keyboard setting was adding a keyboard layout (on Ubuntu). What is happening Whenever I press c, xc is writeen s gives me sd d gives me sd e gives me we 2 gives me 23, So when I want @ it gives me @# 3 gives me 23 Pressing CAPS Lock gives me F3 and vice-versa. All other key are either working fine or I don't use them. I have two operating system Ubuntu and Windows, I use Windows very less and found this problem on Ubuntu, but as soon as I logged in to Windows (for checking) then I found that Windows has the same problem. Effects on my life This starts form the time of login, even I have problem in typing my password. Whenever I try to save any webpage, it is bookmarked automatically. Whenever I copy, it is cut automatically. I have to spend more than half of time correcting what I have typed. Note: Typing thisd quwesdtion wasd rweally a big pain to mwe.

    Read the article

  • Wireless Access Point stopped working

    - by Alex Pritchard
    I have a simple LAN set up at home using a Linksys WRT54GSV4 as my primary router and an Encore ENHWI-2AN3 as an access point. I connect the Encore to the Linksys by running a cable from one of the Linksys LAN ports into the Encore WAN input. I originally configured this using the Encore setup wizard, setting the device up in AP Router Mode. It detected the input network and worked about as expected, creating a second network that used my primary network to connect to the internet. It worked fine for about 2 weeks, then abruptly cut out today. I checked to make sure the network was still live through the cable going into the Encore (provides internet when connected to a laptop directly) and that devices are still able to connect to the network being broadcast by the Encore. When I try to rerun the connection wizard on the Encore, I receive the message "No Services found in WAN port." The WAN Settings is no longer retrieving a dynamic ip from the line. I tried providing a static IP, assigning an IP address within the subnet range of my primary router that wasn't being used and pointing the Default Gateway to the Linksys IP, but this did not work either. When I plug the cable into the WAN port, an internet light comes on that is not lit when a live network is not connected. I've tried doing a hard reset on the Encore (held down the rest button until the lights flashed, reconfigured from scratch), but the WAN settings are still not detected. Also tried powering off and on the modem, linksys, and encore. Any suggestions would be appreciated!

    Read the article

  • Ubuntu+Win7--disk error press any key to restart

    - by Siddharth
    Apparently,none of the solutions in any other posts and forums worked for me For some reasons I decided to remove ubuntu from my hard disk drive. My partition table(presently): (/dev/sda1) (fat32) 900 MiB ---(MBR,I suppose) (/dev/sda2) (ntfs) 70 GiB -----(Windows 7) (/dev/sda3) (ntfs) 314.88 GiB --(Personal File storage) (/dev/sda4) (ext4) 80 GiB -----(Ubuntu 13.04) (unallocated) -----1.31 MiB So,after moving(cut-paste) everything(for backup) from the fat32 partition using win7..I booted into Ubuntu and copied the remaining 3 files(hidden in Win7 file explorer) --bootmgr,bootsect.bak,and one more which I do not remember.TERRIBLE MISTAKE After this I again booted into Windows and deleted ext4 partition..formatted it to ntfs..and shut down the pc.Then,I put in a Win7 bootable USB..using command prompt I entered bootrec /fixmbr,and bootrec /fixboot.. Restarting showed me the GRUB..choosing windows 7 showed me "Disk Error. Press any key to restart." I also installed a fresh Win7 installation on the 80 GiB partition expecting a Windows Legacy Bootloader with two win7 options..but did not work. Then..I used a Ubuntu LiveUSB to put it back to the present configuration(above) since all methods to restore the MBR failed.. I copied back the fat32 partitions backup files but couldn't copy those 3 files.Somehow ,they had been recreated and were non-replaceable. I do not want to format the win7 partition for a fresh one. I have used boot-repair..Restore MBR option brings back to "Disk error...." without even going through grub..so I reinstalled grub and I'm able to boot into Ubuntu. grub menu shows the win7 option as "Windows 7 (loader) (on /dev/sda1)". paste.ubuntu.com/5753710 paste.ubuntu.com/5775999

    Read the article

  • User profile service fails

    - by s.r.a
    I have Windows 7 and 3 drives on my HDD. The second drive is D:\, and there are some files in that. I decided to install 8.1 Enterprise so I installed it in dual boot manner beside 7 and in D:\ drive which as I said was not empty and when installing 8.1, I didn't format the D:. I installed 8.1 successfully in D:\ and it was working fine. One time which I came up with 7, I thought I should arrange the 8.1 folders in D: to be separated from the other non-8.1 folders, so I created a new folder named it "Windows 8.1" and cut all 8.1 folders and pasted them into that new folder. Now my D: drive was arranged. When I restart the PC, I selected the 8.1 to start with, but it didn't come up like before and instead, it shows now a blue screen (not the blue screen of death!) and the time is shown in left-down corner of it. When I click the screen this message appears: The User Profile Service service Failed the sign-in. User Profile can not be loaded. I know two things: 1- The problem is to do with that cutting and pasting the 8.1 folders to be arranged. And 2- If I reinstall the 8.1, the problem will be solved (but if I don't do that cutting and pasting again!) Is there any simpler way to solve the issue and have the two OSs with each other?

    Read the article

  • What user information is exposed via a browser?

    - by ipso
    Is there a function or website that can collect and display ALL of the user information that can be obtained via a browser? Background: This of course does not account for the significant cross-reference abilities of large corporations to collate multiple sources and signals from users across various properties, but it's a first step. Ghostery is just a great idea; to show people all of the surreptitious scripts that run on any given website. But what information is available – what is the total set of values stored – that those scripts can collect from? If you login to a search engine and stay logged in but leave their tab, is that company still collecting your webpage viewing and activity from other tabs? Can past or future inputs to pages be captured – say comments on another website? What types of activities are stored as variables in the browser app that can be collected? This is surely a highly complex question, given to countless user scenarios – but my whole point is to be able to cut through all that – and just show the total set of data available at any given point in time. Then you can A/B test and see what is available with in a fresh session with one tab open vs. the same webpage but with 12 tabs open, and a full day of history to boot. (Latest Firefox & Chrome – on Win7, Win8 or Mint13 – although I'd like to think that won't make too much of a difference. Make assumptions. Simple is better.)

    Read the article

  • Kickstarting an Ubuntu Server 10.04 installation (DHCP fails)

    - by William
    I'm trying to automate the network installation of Ubuntu 10.04 LTS with an anaconda kickstart and everything seems to running except for the initial DHCP autoconfiguration. The installer attempts to configure the install via DHCP but fails on its first attempt. This brings me to a prompt where I can retry DHCP and it seems to always work on the second attempt. My issue is that this is not really automated if I have to hit retry for DHCP. Is there something I can add to the kickstart file so that it will automatically retry or better yet not fail the first time? Thanks. Kickstart: # System language lang en_US # Language modules to install langsupport en_US # System keyboard keyboard us # System mouse mouse # System timezone timezone America/New_York # Root password rootpw --iscrypted $1$unrsWyF2$B0W.k2h1roBSSFmUDsW0r/ # Initial user user --disabled # Reboot after installation reboot # Use text mode install text # Install OS instead of upgrade install # Use Web installation url --url=http://10.16.0.1/cobbler/ks_mirror/ubuntu-10.04-x86_64/ # System bootloader configuration bootloader --location=mbr # Clear the Master Boot Record zerombr yes # Partition clearing information clearpart --all --initlabel # Disk partitioning information part swap --size 512 part / --fstype ext3 --size 1 --grow # System authorization infomation auth --useshadow --enablemd5 %include /tmp/pre_install_ubuntu_network_config # Always install the server kernel. preseed --owner d-i base-installer/kernel/override-image string linux-server # Install the Ubuntu Server seed. preseed --owner tasksel tasksel/force-tasks string server # Firewall configuration firewall --disabled # Do not configure the X Window System skipx %pre wget "http://10.16.0.1/cblr/svc/op/trig/mode/pre/system/Test-D" -O /dev/null # Network information # Start pre_install_network_config generated code # Start of code to match cobbler system interfaces to physical interfaces by their mac addresses # Start eth0 # Configuring eth0 (00:1A:64:36:B1:C8) if ip -o link show | grep -i 00:1A:64:36:B1:C8 then IFNAME=$(ip -o link show | grep -i 00:1A:64:36:B1:C8 | cut -d" " -f2 | tr -d :) echo "network --device=$IFNAME --bootproto=dhcp" >> /tmp/pre_install_ubuntu_network_config fi # End pre_install_network_config generated code %packages openssh-server

    Read the article

  • Ubuntu Server Wireless connection issue - replaced router but kept ESSID

    - by Stevo
    I have a ubuntu server 12.04 which was connected to my wireless network with no problem I replaced the wireless router but kept the ESSID and password the same. All other devices on network have connected correctly. However the Ubuntu Server will not route correctly. It will connect to the wifi router, and get a dhcp served IP address, however it will not route anything. I cannot ping the router from the server. the contents of /etc/resolve.conf are updated with the information from the router, (the host name has been served) I know there is nothing wrong with the router or the server, or the wireless card etc. I'm assuming there's some cached setting that associates the old router with the ESSID and causing the issue. I've got a lot of other devices connected to the router, so don't want to change the name of the ESSID. How do I fix this? EDIT: outputs (abbreviated as I've got no cut and paste) netstat -rn: Kernel IP Routing table Dest Gate Gen Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0. UG 0 0 0 wlan0 192.168.0.0 0.0.0.0. 255.255.255.0 U 0 0 0 wlan0

    Read the article

  • Limited bandwidth and transfer rates per user.

    - by Cx03
    I searched for a while but couldn't find anything concrete, hopefully someone can help me. I'm going to be running a Debian server on a gigabit port, and want to give each user his/her fair share of internet access. The first objective is easy - transfer rates (speed) per user. From what I've looked at, IPTables/Shorewall could do the job easy. Is this easy to setup, or could one of you point me at a config? I was hoping to limit users at 300mbit or 650mbit each. The second objective gets complicated. Due to the usage of the boxes, most of the traffic will be internal network traffic that does NOT get counted to the quota. However, I still need to limit the external traffic, and if they go over, cut off access (or throttle traffic to a very low speed (10mbit?)). Let's say the user has a 3TB external traffic limit. The IF part is: If the hostname they are exchanging the traffic with DOES NOT MATCH .ovh. or .kimsufi. (company owns multiple TLDs), count to the quota. Once said quota exceeds 3TB, choke them. Where could I find a system to count that for me? It would also need to reset or be able to be manually reset on a monthly basis. Thanks ahead of time!

    Read the article

  • Installing a new Motherboard in a HP xw6200 case

    - by thing2k
    I have a HP xw6200 Workstation, that is rather long in the tooth, and with 2 physical CPUs, it is quite inefficient. So, the plan was to upgrade the internals. Nothing special: AMD Athlon II X4 640 ASUS M4A78KT-M LE (mATX) 2x 2GB DDR3 1333MHz RAM. 3p under my £150 budget The issues: The pin connector for the front panel isn't a good fit, but I can trim it to size. The PSU has a 8-Pin Power connector, unsurprisingly, the new board has a 4 pin socket. The pins do line up, but I would have to cut it in half to fit. Finally, due to the weight of heat-sinks, they are screwed directly into the case. It turns out that these screws also lock the motherboard in place. As to remove it, you remove the heat-sinks, slide the motherboard across and lift it out. I tested the new board for fit, and while it slots in fine, it's not secure. There is nowhere to screw the board down, it is just held in place with plastic standoffs. The only idea I had, was to wedging something between the side of the motherboard and part of the case. Any suggestions?

    Read the article

  • Migrating ODBC information through a batch file

    - by DeskSide
    I am a desktop support technician currently working on a large scale migration project across multiple sites. I am looking at a way to transfer ODBC entries from Windows XP to Windows 7. If anyone knows of a program or anything prebuilt that already does this, please redirect me. I've already looked but haven't found anything, so I'm trying to build my own. I know enough basic programming to read the work of others and monkey around with something that already exists, but not much else. I have come across a custom batch file written at one site that (among other things) exports ODBC information from the old computer and stores it on a server (labelled as y: through net use at the beginning of the file), then later transfers it from the server to a new computer. The pre-existing code is for Windows XP to XP migrations. Here are the pertinate bits of code: echo Exporting ODBC Information start /wait regedit.exe /e "y:\%username%\odbc.reg" HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC.INI (and later on) echo Importing ODBC start /wait regedit /s "y:\%username%\odbc.reg" We are now migrating from Windows XP to 7, and this part of the batch file still seems to work for this particular site, where Oracle 8i and 10g are used. I'm looking to use my cut down version of this code at multiple sites, and I'm wondering if the same lines of code will still work for anything other than Oracle. Also, my research on this issue has shown that there are different locations in 64 bit operating systems for 32/64 bit entries, and I'm wondering what effect that would have on the code. Could I copy the same data to both parts of the registry, in hopes of catching everything? Any assistance would be appreciated. Thank you for your time.

    Read the article

  • Is domain-transfer inherently safe for downtime when the name servers remain the same?

    - by jlmt
    I've been reading around this topic towards understanding whether there's some or no chance of downtime during an upcoming domain transfer for 15 live and very critical domains. In our case there are three companies involved: CompanyA is the original registrar and DNS host, CompanyB is the new DNS host, and CompanyC is the new registrar. I've already changed the nameservers for all domains to those of CompanyB. We suffered some downtime because CompanyA deleted their hosted DNS for our domains directly after the change, but the changes propagated and we're now able to configure our DNS with CompanyB. From what I understand (please correct where wrong!): There exists an SOA record that points oneofourdomains.com to ns.companyb.com. That record is maintained and authoritatively hosted by the ccTLD registry for the domain (eg. Verisign for .com). CompanyA currently has the ability to change the SOA record because they're the registrar. There exist NS records for oneofourdomains.com, which are also related to the link from domain name to nameserver, are similarly hosted by the ccTLD, and which CompanyA are also able to change while acting as registrar. Neither CompanyB nor CompanyC currently have any control over the SOA or NS records. CompanyA are unable to cause us (DNS) problems during the transfer by dropping service early, because they are not the authoritative source for the SOA and NS records. When we transfer the domains, it's administrative control of the SOA and NS records that will be transferred to CompanyC. As long as we advise CompanyC that the SOA and NS records must not change (as regards pointing to CompanyB's nameservers), there's no need for any kind of DNS change, and therefore no possibility of downtime. Is my understanding of this correct? My fear is that CompanyA will somehow cut us off again, and their support dept hasn't given me much confidence in their understanding of the topic.

    Read the article

  • Euro character messed up during FTP transfer

    - by djechelon
    My customer is using a very outdated ecommerce management system on my hosting service. For that product, no support is being provided anymore by the vendor. Brief explanation: the shop website, that claims to run under LAMP stack, is built by an old Visual Basic Windows application running on MS Access. The user constructs the shop, defines the HTML template, adds products and categories, etc. Then the VB exe builds the PHP pages (one for each template page) and the SQL script to run on MySQL. It also uploads everything via FTP and runs the installation/upgrade script on its own. The problem Browsing the website, many products' descriptions are cut before the euro sign. For example, what was supposed to be "Product price €1000" becomes "Product price" The analysis MySQL contains a cutted description until the € sign, so it's not PHP fault The Access databases contain full description with € sign, so it's not fault of the webmaster writing bad description or eDisplay cutting them The SQL that will run once the site gets uploaded, stored on my local machine before upload, contains the € sign The same script, after being FTPed by eDisplay and opened with nano from SSH, shows the € sign messed up like this: ^À vsftpd log reports (obfuscated for privacy) Sat Dec 15 11:16:57 2012 22 xxx.xxx.128.13 1112727 /srv/www/domains/xxxxxx.it/htdocs/db.sql b _ i r xxxxxxx ftp 0 * c which seems to be a binary transfer (and also a huge security vulnerability because you can download the whole database from unauthenticated HTTP) The eDisplay internal FTP client provides no option for ascii/binary transfer modes [Add] Trying to manually upload the SQL file via SFTP shows messing up euro [Add2] Trying to manually upload using Xftp client with explicit ASCII mode doesn't fix too It looks like the file gets uploaded as binary. Perhaps on the customer's previous host it all worked fine because that was a Windows host. The server It's an Azure virtual machine running openSUSE 12.2 with both vsftpd and openSSH The question Without asking the customer to manually upload files using FileZilla or replacing € with &euro;, because he refuses, what can I do on server side to prevent vsftpd to screw up euro sign?

    Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >