knapsack problem - Page 64

Google Translate API for iPhone - UTF8 problem in Chinese Translation

- by Sky Chen

I've tested a workable translation API url by: http://translate.google.com/translate_a/t?client=t&text=%E5%BB%A3%E5%A0%B4&langpair=zh|zh-CN And it returns the correct result as the following which is in JSON format: {"sentences":[{"trans":"??","orig":"??","translit":"Guangchang"}],"src":"zh-CN"} However, when I try to use this function in XCode, I experienced this problem ... Here is my code: NSData *data; NSString *urlPath = [NSString stringWithFormat:@"/translate_a/t?client=t&text=%@&langpair=zh|zh-CN",qText]; NSURL *url = [[NSURL alloc] initWithScheme:@"http" host:@"translate.google.com" path:urlPath]; NSMutableURLRequest *request = [[[NSMutableURLRequest alloc] init] autorelease]; [request setURL:url]; [request setHTTPMethod:@"GET"]; NSURLResponse *response; NSError *error; data = [NSURLConnection sendSynchronousRequest:request returningResponse:&response error:&error]; NSString *result = [[NSString alloc] initWithData:data encoding:NSUTF8StringEncoding]; //Problem's here. It returns nil. NSLog(result); Initially I guessed it's encoding problem so I tried other encoding as well (NSISOLatin1StringEncoding) , but I got wrong answer: {"sentences":[{"trans":"ã ","orig":"ã ","translit":"Tu¨¯ "}],"src":"zh-CN"} Does anyone know how to solve this problem? Thank you very much!

Read the article

Problem writing a snippet containing Emacs Lisp code

- by user388346

Hi all, I've been trying to make use of a cool feature of YASnippet: write snippets containing embedded Emacs Lisp code. There is a snippet for rst-mode that surrounds the entered text with "=" that is as long as the text such as in ==== Text ==== Based on this snippet, I decided to slightly modify it (with Elisp) so that it comments out these three lines depending on the major mode you are in (I thought that such a snippet would be useful to organize the source code). So I wrote this: ${1:`(insert comment-start)`} ${2:$(make-string (string-width text) ?\-)} $1 ${2:Text} $1 ${2:$(make-string (string-width text) ?\-)} $0 This code works relatively well except for one problem: the indentation of these three lines gets mixed up, depending on the major mode I'm in (e.g., in emacs-lisp-mode, the second and the third lines move more to the right than the first line). I think the source of the problem might have something to do with what comes after the string ${1: on the first line. If I add a character, I have no problem (i.e., all three lines are correctly aligned at the end of the snippet expansion). If I add a single space after this string, the misalignment problem still continues though. So my question is: do you know of any way of rewriting this snippet so that this misalignment does not arise? Do you know what's the source of this behaviour? Cheers,

Read the article

HTML href with css ie Problem

- by Jordan Pagaduan

Read the article

Problem deleting .svn directories on Windows XP

- by John L

I don't seem to have this problem on my home laptop with Windows XP, but then I don't do much work there. On my work laptop, with Windows XP, I have a problem deleting directories when it has directories that contain .svn directories. When it does eventually work, I have the same issue emptying the Recycle bin. The pop-up window says "Cannot remove folder text-base: The directory is not empty" or prop-base or other folder under .svn This continued to happen after I changed config of TortoiseSVN to stop the TSVN cache process from running and after a reboot of the system. Multiple tries will eventually get it done. But it is a huge annoyance because there are other issues I'm trying to fix, so I'm hoping it is related. 'Connected Backup PC' also runs on the laptop and the real problem is that cygwin commands don't always work. So I keep thinking the dot files and dot directories have something to do with both problems and/or the backup or other process scanning the directories is doing it. But I've run out of ideas of what to try or how to identify the problem further.

Read the article

Hibernate saveOrUpdate problem on char data type

- by Yashwant Chavan

Hi I am using Hibernate 3.0 , facing issue related to the char datatype field. I am trying to save Client pojo in the database, using following method. Problem is my client_id field is char(10) in the database. when client_id is 10 characters it works fine. but when client_id is less than ten characters it gives problem at the time of update. Rather than updating data it try to insert cleint record again and gives the unquie key exeception. i drill down the problem because of char(10) client_id field. it keeps space after client_id value upto 10 characters. Is there is any confuguration to overcome this problem. rather than modifying client_id to varchar2. public boolean saveClient(Clnt client) { boolean lReturnValue = false; SessionFactory sessionFactory = null; Session session = null; Transaction transaction = null; try { HibernateTemplate hibernateTemplate = getHibernateTemplate(); sessionFactory = hibernateTemplate.getSessionFactory(); session = sessionFactory.getCurrentSession(); transaction = session.beginTransaction(); session.saveOrUpdate(client); transaction.commit(); lReturnValue = true; } catch (HibernateException e) { lReturnValue = false; // TODO Auto-generated catch block if (transaction != null) { transaction.rollback(); } e.printStackTrace(); } return lReturnValue; }

Read the article

Problem with Email Notifications in VisualSVN Server

- by emzero

Hey guys! I have a dedicated server running windows 2003 server and Visual SVN Server 2.0.8. I'm trying to configure it to send email notifications on commit. So I found this article on Visual SVN site. It says I have to edit the Post-commit hook and set it to the following: "%VISUALSVN_SERVER%\bin\VisualSVNServerHooks.exe" ^ commit-notification "%1" -r %2 ^ --from <from-email> --to <to-email> ^ --smtp-server <smtp-server> Of course I've replaced the variables there. The problem is when someone commits something, the svn client throws the following error: post-commit hook failed (exit code 1) with no output. The commit process runs with no problems, I mean it does commit the files. But it won't send any email notification. If I remove the post-commit hook, then I don't get the error (and of course I don't get any notification). Could you help me out with it? The error doesn't tell too much =S Thank you!

Read the article

Problem with squid log files

- by Gatura

I am using SARG to get a report on the squid log files, I get this result /usr/local/Sarg/bin/sarg -l /usr/local/squid/var/logs/access.log SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% SARG: Records in file: 0, reading: 0.00% sort: open failed: +6.5nr: No such file or directory SARG: (index) Cannot open file: /Applications/Sarg/reports/index.sort SARG: Records in file: 0, reading: 0.00% What could be the problem?

Read the article

Amazon Ec2: Problem In Setting up FTP Server

- by Muntasir

after setting up My vsFtp Server ON Ec2 i am facing problem , my client is Filezilla and i am getting this error Response: 230 Login successful. Command: OPTS UTF8 ON Response: 200 Always in UTF8 mode. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" Command: TYPE I Response: 200 Switching to Binary mode. Command: PASV Response: 500 OOPS: invalid pasv_address Command: PORT 10,130,8,44,240,50 Response: 500 OOPS: priv_sock_get_cmd Error: Failed to retrieve directory listing Error: Connection closed by server this is the current setting in my vsftpd.conf #nopriv_user=ftpsecure #async_abor_enable=YES # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # chroot_local_user=YES #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd/chroot_list GNU nano 2.0.6 File: /etc/vsftpd/vsftpd.conf # #ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd with two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES pasv_enable=YES pasv_min_port=2345 pasv_max_port=2355 listen_port=1024 pasv_address=ec2-xxxxxxx.compute-1.amazonaws.com pasv_promiscuous=YES Note: i have already open those port in security group i mean listen port, min max if someone shows me how to fix this i will be very greatful thanks

Read the article

CVSROOT problem because of username string

- by jatanp

Hi, I have always been SVN user but currently I have to use CVS as the source repository. I am quite new to CVS and really got confused many a times (reason being I always tried to access CVS like SVN !) However now I am really stuck in one problem wherein I am not able to do any cvs operations through cygwin. Actually I have checked out the code using WinCVS and while doing that it created the CVSROOT as following, :pserver;username=<user_name>;password=<pwd>:<serverip>:/cvs/repository However whenever I try to use cvs command in cygwin (after setting CVSROOT variable using export) it fails with following error: cvs update: Unknown option (`username') in CVSROOT. cvs update: in directory .: cvs update: ignoring CVS/Root because it does not contain a valid root. cvs update: Unknown option (`username') in CVSROOT. cvs [update aborted]: Bad CVSROOT: `:pserver;username=<user_name>;password=<pwd>:<serverip>:/cvs/repository'. However the command works fine, if invoked through dos command prompt. I got to know that on DOS prompt, cvs command is provided by CVSNT whereas in cygwin it's some different package. Please let me know where I have made a mistake and how it can be corrected ! I need cvs to work inside cygwin for some scripting purpose.

Read the article

Problem: Munin Graph

- by Pablo

I've been trying to install Munin for 15 days, I looked for information, analized logs, I even deleted and reinstalled Munin using YUM. I'm hosted at Media Temple on a VPS with CentOS. The problem is still there and It's driving me nuts. Graphics are shown as following: http://imageshack.us/photo/my-images/833/capturadepantalla201106u.png/ This is the configuration of my munin.conf file dbdir /var/lib/munin htmldir /var/www/munin logdir /var/log/munin rundir /var/run/munin [localhost] address **.**.***.*** #IP VPS This is the configuration of my munin-node.conf file log_level 4 log_file /var/log/munin/munin-node.log port 4949 pid_file /var/run/munin/munin-node.pid background 1 setseid 1 # Which port to bind to; host * user root group root setsid yes # Regexps for files to ignore ignore_file ~$ ignore_file \.bak$ ignore_file %$ ignore_file \.dpkg-(tmp|new|old|dist)$ ignore_file \.rpm(save|new)$ allow ^127\.0\.0\.1$ Thanks so much, I appreciate all the answers UPDATE munin-graph.log Jun 22 16:30:02 - Starting munin-graph Jun 22 16:30:02 - Processing domain: localhost Jun 22 16:30:02 - Graphed service : open_inodes (0.14 sec * 4) Jun 22 16:30:02 - Graphed service : sendmail_mailtraffic (0.10 sec * 4) Jun 22 16:30:02 - Graphed service : apache_processes (0.12 sec * 4) Jun 22 16:30:02 - Graphed service : entropy (0.10 sec * 4) Jun 22 16:30:02 - Graphed service : sendmail_mailstats (0.14 sec * 4) Jun 22 16:30:02 - Graphed service : processes (0.14 sec * 4) Jun 22 16:30:03 - Graphed service : apache_accesses (0.27 sec * 4) Jun 22 16:30:03 - Graphed service : apache_volume (0.15 sec * 4) Jun 22 16:30:03 - Graphed service : df (0.21 sec * 4) Jun 22 16:30:03 - Graphed service : netstat (0.19 sec * 4) Jun 22 16:30:03 - Graphed service : interrupts (0.14 sec * 4) Jun 22 16:30:03 - Graphed service : swap (0.14 sec * 4) Jun 22 16:30:04 - Graphed service : load (0.11 sec * 4) Jun 22 16:30:04 - Graphed service : sendmail_mailqueue (0.13 sec * 4) Jun 22 16:30:04 - Graphed service : cpu (0.21 sec * 4) Jun 22 16:30:04 - Graphed service : df_inode (0.16 sec * 4) Jun 22 16:30:04 - Graphed service : open_files (0.16 sec * 4) Jun 22 16:30:04 - Graphed service : forks (0.13 sec * 4) Jun 22 16:30:05 - Graphed service : memory (0.26 sec * 4) Jun 22 16:30:05 - Graphed service : nfs_client (0.36 sec * 4) Jun 22 16:30:05 - Graphed service : vmstat (0.10 sec * 4) Jun 22 16:30:05 - Processed node: localhost (3.45 sec) Jun 22 16:30:05 - Processed domain: localhost (3.45 sec) Jun 22 16:30:05 - Munin-graph finished (3.46 sec)

Read the article

TS (RD) Gateway Authentication Problem "The logon attempt failed"

- by user2059

I've been using TS Gateway to permit remote access for our staff for a few months now, and all has been well. Users either connect to a traditional terminal server desktop or hit our website and start an TS RemoteApp application- in both cases the connection is routed through a TS Gateway. However I came into work this morning to find that has stopped authenticating users through TS Gateway, each time returning "The logon attempt failed" as seen in the image even though the credentials are correct. It should be noted that everything works fine if the Gateway is taken out of the equation, it's the TS Gateway component that is causing these problems. Users experience this problem whether they connect through XP SP3, Vista or 7. On the server a total of 4 entries appear in the Windows security log at exactly the same time for each failed logon attempt: two 4624 "An account was successfully logged on" messages for the user, immediately followed by two 4634 "An account was logged off"s. This suggests that the server is accepting the credentials as correct, then booting the user off. Nothing at all is recorded in the NPS and Terminal Server logs. A reboot doesn't change things. Neither does completely removing and reinstalling the NPS and Terminal Server roles. I'm baffled as to how this can happen suddenly without warning. Any suggestions would be greatly appreciated.

Read the article

centos postfix send email problem

- by Catalin

I have a big problem with postfix. I can receive mail in webmin and outlook but I can't send (only on local I can - user to user). Dovecot is working just fine. Sendmail is disable. Please help me. postfix -n postfix: invalid option -- n postfix: fatal: usage: postfix [-c config_dir] [-Dv] command [root@xprivatecams usr]# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 home_mailbox = Maildir/ html_directory = no inet_interfaces = all mail_owner = postfix mailbox_command = mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man milter_default_action = acceptsmtpd_tls_auth_only = no milter_protocol = 2 mydestination = $myhostname, localhost.$mydomain, localhost myhostname = xprivatecams.com mynetworks = 94.177.41.0/24, 127.0.0.0/8 newaliases_path = /usr/bin/newaliases.postfix non_smtpd_milters = inet:localhost:20207 queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES sample_directory = /usr/share/doc/postfix-2.3.3/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtp_tls_note_starttls_offer = yes smtp_use_tls = yes smtpd_milters = inet:localhost:20207 smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = smtpd_sasl_security_options = noanonymous smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem smtpd_tls_auth_only = no smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes tls_random_source = dev:/dev/urandom unknown_local_recipient_reject_code = 550 Jan 18 00:46:17 xprivatecams postfix/postfix-script: starting the Postfix mail system Jan 18 00:46:17 xprivatecams postfix/master[15545]: daemon started -- version 2.3.3, configuration /etc/postfix Jan 18 00:48:00 xprivatecams postfix/pickup[15546]: EDE7EA8001B: uid=0 from=<[email protected]> Jan 18 00:48:00 xprivatecams postfix/cleanup[15817]: EDE7EA8001B: message-id=<[email protected]> Jan 18 00:48:00 xprivatecams opendkim[2776]: EDE7EA8001B: DKIM-Signature header added Jan 18 00:48:01 xprivatecams postfix/qmgr[15547]: EDE7EA8001B: from=<[email protected]>, size=615, nrcpt=1 (queue active) Jan 18 00:48:31 xprivatecams postfix/smtp[15820]: connect to mail.flabell.com[72.47.224.75]: Connection timed out (port 25) Jan 18 00:48:31 xprivatecams postfix/smtp[15820]: EDE7EA8001B: to=<[email protected]>, relay=none, delay=30, delays=0.08/0.03/30/0, dsn=4.4.1, status=deferred (connect to mail.flabell.com[72.47.224.75]: Connection timed out) telnet 94.177.41.70 25 Trying 94.177.41.70... Connected to xprivatecams.com (94.177.41.70). Escape character is '^]'. 220 xprivatecams.com ESMTP Postfix ehlo me 250-xprivatecams.com 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH LOGIN PLAIN 250-AUTH=LOGIN PLAIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN

Read the article

Debian and Multipath IO problem

- by tearman

Basically the situation is, I have a box running Debian, the box internally has an Intel SCSI RAID controller which is controlling 2 hard drives in RAID1 mode which is where the OS is installed. Further, I have a QLogic fiber channel adapter that connects the unit to a Fiber Channel SAN. My process of installation is I'll install Debian to the local drives, and leave the QLogic firmware out of it for the time being. Then once I get the unit online, I'll install the firmware drivers. This flops my internal drives from /dev/sda to /dev/sdc, which is a bit annoying, but recoverable. Probably should address these by UUID anyways. Once I get back online, I have to install multipath-tools (the framework is a multipath framework). However, once I reboot the machine again, it fails on boot after discovering multipath targets, saying my local drives are busy and cannot be mounted to /root. Any help in what may be the problem here? Or at least how to disable multipath until after the unit boots and then ignores the internal drives?

Read the article

Problem with PXE boot

- by user70523

Hi, I followed the following link for PXE boot, http://www.howtoforge.com/setting-up-a-pxe-install-server-on-ubuntu-9.10-p3 and I was able to ping the client from the server and also when I booted up the client It is getting the IP address from the server. But later,I got this error PXELinux 3.82 2009-06-09 . . . [other informations] !PXE Entry point found (we hope) at 9D3B:0109 via plan A UNDI code segment at 9D3B len 16C2 UNDI data segment at 933B len A000 Getting cached packet 01 02 03 . . . [other informations] TFTP prefix: Trying to load: pxelinux.cfg/ec5db4c0-74fe-d511-b9e7-3d9235afe5a1 Trying to load: pxelinux.cfg/01-00-17-31-b6-5e-a8 Trying to load: pxelinux.cfg/0A64491E Trying to load: pxelinux.cfg/0A64491 Trying to load: pxelinux.cfg/0A6449 Trying to load: pxelinux.cfg/0A644 Trying to load: pxelinux.cfg/0A64 Trying to load: pxelinux.cfg/0A6 Trying to load: pxelinux.cfg/0A Trying to load: pxelinux.cfg/0 Trying to load: pxelinux.cfg/default Unable to locate configuration file Boot failed: press a key to retry or wait for reset I have put all the files mentioned in the link in tftpboot. Can anyone explain what could be the problem. Thanks in advance

Read the article

socket problem with MySQL

- by Hristo

This is a recent problem... MySQL was working and a couple of days ago I must have done something. I deleted MySQL and tried reinstalling using the .dmg file. The mysql.sock file never gets created and I get the following error messages: Hristo$ mysql Enter password: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) I also tried stopping Apache and installing but Apache gave me an error... I don't know if this is good or bad: Hristo$ sudo apachectl stop launchctl: Error unloading: org.apache.httpd I tried the MacPorts installation as well but the socket file still didn't get created. I don't really know what to do and I don't want to reinstall Snow Leopard and start from scratch :/ I also tried installing the 32-bit version and same deal. No luck. Finally... I tried doing the source installation but when I get to the configuration step, I get the following error: -bash: ./configure: No such file or directory The file is "mysql-5.1.47-osx10.6-x86_64.tar.gz" so I think it is the proper file for source installation and yes I have a 64 bit system. I don't know what to do anymore. Any ideas? Thanks, Hristo

Read the article

Problem recreating BCD on Windows 7 64bit - The requested system device cannot be found

- by Domchi

NVIDIA drivers upgrade crashed my Windows 7 installation, so I'm working to undo the damage. What I can do: I can boot Windows install from the USB drive, and I can boot the Hiren's Boot CD. Although automated Windows repair fails, I can get to command prompt when I boot Windows install from USB drive, and I can see my drive and all my data. What I cannot do: I cannot boot into Windows - I get this message: Windows failed to start. A recent hardwware or software change might be the cause. To fix the problem: 1.insert windos cd and run a repair your computer option. File: /boot/bcd Status: 0xc000000f Info: an error occured while attempting to read the boot configuration data. It seems that something is wrong with my /Boot/BCD, so I'm trying to recreate it from scratch. I've tried all the methods detailed here (including Windows repair which fails), and I'm left with the last one (near the bottom of that page). When I type the following command as in the tutorial: bcdedit.exe /import c:\boot\bcd.temp ...it fails with the following error: The store import operation has failed. The requested system device cannot be found. Many Google results say that I must use diskpart to set my partition active, however it's already set as active. Also, when I try this: bcdedit /enum It fails with similar message: The boot configuration data store could not be opened. The requested system device cannot be found. Does anyone know what does that error message mean, and what is the requested system device? I'd like to avoid having to reinstall Windows since all the files on disk seem to be fine.

Read the article

problem booting crusty old windows XP

- by Carson Myers

I have an acer aspire laptop running Windows XP home. I believe I have some virus on it, I'm not sure--I mostly just run linux in a VM on it so I wasn't too worried. I'm not sure if that virus caused this problem. The laptop wasn't recognizing my USB hard drive for some reason so I decided to restart it. When it started up, it got past the memory test, past the boot screen, (but it paused right here on a blank screen for awhile) and flashed the desktop once (like it does just before the login screen) and then crashed. I got a quick BSOD and then it restarted. Then it tried to boot again, etc etc infinite loop of failure. Well, before trying safe mode, I disabled automatic restart on system crash so I could read the blue screen. There wasn't anything important on it, it said *** STOP: 0x00000000 (0xC0000000 0x,.... ) beginning physical memory dump physical memory dump complete That's not verbatim (obviously) but it didn't help me. so I booted in safe mode, and it stopped on the driver gagp30kx.sys and then restarted (and infinite loop of failure again). I burned a recovery CD and tried that. It loaded it, and I went into repair mode. I ran chkdsk and then disabled the AGP driver. Same thing on booting in safe mode except it stopped at mup.sys instead. I enabled the AGP driver again, and ran chkdsk again from the CD. It said it found problems but didn't say it fixed them. So I ran it a second time, and it said "performing additional checking or recovery" lots of times (I can't tell how many, they went above the screen top). I tried booting again and no luck. Every time I run chkdsk after trying to boot again it says it found and fixed more errors. I think it might be whatever driver is after the AGP driver, but I don't know what it is or how to find out. Can anyone help me fix this?

Read the article

phpBB configuration problem under Nginx

- by zvikico

Hi, I have a phpBB site running with Nginx (PHP via FastCGI). It works OK. However, some specific actions like moving or deleting a topic fail. Instead, I'm redirected to the forum index. I think it is a problem with the URLs redirection or rewriting. My rewrite rule looks like this: if (!-e $request_filename) { rewrite ^/(.*)$ /index.php?q=$1 last; break; } Any help would be appreciated. My full configuration file is: server { listen 80; server_name forum.xxxxx.com; access_log /xxxxx/access.log; error_log /xxxxx/error.log; location = / { root /xxxxx/phpBB3/; index index.php; } location / { root /xxxxx/phpBB3/; index index.php index.html; if (!-e $request_filename) { rewrite ^/(.*)$ /index.php?q=$1 last; break; } } error_page 404 /index.php; error_page 403 /index.php; error_page 500 502 503 504 /index.php; # serve static files directly location ~* ^.+\.(jpg|jpeg|gif|css|png|js|ico)$ { access_log off; expires 30d; root /xxxxx/phpBB3/; break; } # hide protected files location ~* \.(engine|inc|info|install|module|profile|po|sh|.*sql|theme|tpl(\.php)?|xtmpl)$|^(code-style\.pl|Entries.*|Repository|Root|Tag|Template)$ { deny all; } location ~ \.php$ { fastcgi_pass 127.0.0.1:8888; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /xxxxx/phpBB3/$fastcgi_script_name; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; } }

Read the article

DD-WRT PPTP VPN problem

- by Tobias Tromm

I try to configure a DD-WRT as a PPTP client. The VPN Server is Windows Server 2003. This is my scenario: The Windows 2003 Server has set to give to the VPN Client the 10.0.0.81 fixed IP and to add a network route to the remote home. At the remote home I have changed the PPTP Options at DD-WRT to make the connection. The VPN connection is successfully established. ...and Windows successfully add the route to the remote home 192.168.2.X. From the remote home I can successfully access any computer from the VPN server side. The problem is when I try to access the remote home from the Server side. From Server side I only can access\ping DD-WRT ( by VPN Client IP - 10.0.0.81). What's wrong? How I need to do to be a site-to-site VPN? This is what happen when I try to tracert the remote home from local home.

Read the article

Windows 2003 DNS or IIS6 Problem?

- by Mario

Weird DNS problem... We have an intranet located internally on a windows 2003 / iis6 server - DNS handled internally on another windows 2003 server. The intranet, amongst other functions, hosts a ecommerce store I wrote that sells nike apparel embroidered with our company logo. Up until recently, it would send an email to payroll and the cost would be deducted from the employees paycheck. lets say this store is located at http://mydomain.com (only available internally) Now, we've been told by the accountants that we can no longer auto deduct from payroll and the employee needs to pay with a credit card or cash. So i went to thawte.com and ordered an SSL cert to be on the safe side (even though the CC gateway is secure) and they told me i need to drop the .com from the domain name Not wanting to mess with a system thats perfectly functional, i created another DNS entry that just points to mydomain (no .com) and left the old one in there. so they would go to http://mydomain On my Mac (OS X 10.6) i can hit either one just fine On Windows XP / Windows XP Embedded or Windows 7 (the vast majority of the pc's on our network) http://mydomain - returns nothing http://mydomain.com still works https://mydomain.com works but says the cert is invalid (as it should, it was issued to mydomain - not mydomain.com) my question is: why does it work on my Mac and not on a Windows PC (i get dhcp and dns just like any other pc on the network) and will removing the .com one from the DNS server resolve this? I've done all the usual attempts - ipconfig /flushdns, ipconfig /renew and release even going so far as to stop and restart DNS client on my Windows 7 box; rebooting and shutting down - adding a regedit entry something along the lines of SecureResponses and rebooting nothing works... I think its the .com and the not conflicting in DNS but i'm not sure - and why not on OS X We're closed on sunday and i'm going to remote in and see what happens if i remove the .com from DNS but any other ideas? -Mario

Read the article

Problem configuring virtual host.

- by Zeeshan Rang

I am tring to configure apache virtual host for my computer. But i am facing problem in doing so. i have made required changes in my C:\WINDOWS\system32\drivers\etc\hosts then C:\xampp\apache\conf\extra\httpd-vhosts.conf I added the following lines in httpd-vhosts.conf ########################Virtual Hosts Config below################## NameVirtualHost 127.0.0.1 <VirtualHost localhost> ServerName localhost DocumentRoot "C:\xampp\htdocs" DirectoryIndex index.php index.html <Directory "C:\xampp\htdocs"> AllowOverride All </Directory> </VirtualHost> <VirtualHost virtual.cloudse7en.com> ServerName virtual.cloudse7en.com DocumentRoot "C:\development\virtual.cloudse7en.com\httpdocs" DirectoryIndex index.php index.html <Directory "C:\development\virtual.cloudse7en.com\httpdocs"> Options Indexes FollowSymLinks Includes ExecCGI AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> <VirtualHost virtual.app.cloudse7en.com> ServerName virtual.app.cloudse7en.com DocumentRoot "C:\development\virtual.app.cloudse7en.com\httpdocs" DirectoryIndex index.php index.html <Directory "C:\development\virtual.app.cloudse7en.com\httpdocs"> Options Indexes FollowSymLinks Includes ExecCGI AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> ######################################################################## I started my xampp and tried http://localhost in a browser. This works and open up http://localhost/xampp/ but when i try http:http://virtual.app.cloudse7en.com it again opens up http://virtual.app.cloudse7en.com/xampp/ I do not understand the reason. Also i have a windows vista 64 bit, operating system. Do i need to make some other changes too? Regards Zee

Read the article

Problem configuring Apache/Wordpress on subdomain

- by friism

I have two servers (one LAMP, one Windows) and one website with an associated blog. I'm running the main site on the Windows server, and the blog on the LAMP server, using Wordpress. The main site is accessed at http://folketsting.dk (it's in Danish -- sorry), the blog is accessed at http://blog.folketsting.dk (this link is bad, read on). The main site works fine. The blog works, except for the frontpage. Example of working post: http://blog.folketsting.dk/2009/10/09/ftlive/. The frontpage of the blog (http://blog.folketsting.dk) shows html from http://folketsting.dk however (except for the css and javascript). In fact, any other URL than the frontpage "works", and gets served by Wordpress e.g. http://blog.folketsting.dk/foo. I cannot -- for the life of me -- understand how the LAMP server running http://blog.folketsting.dk manages to serve up content generated by the Windows server running http://folketsting.dk. Looking at the response headers at http://blog.folketsting.dk, it's evident that the content originates from Apache, not IIS. I'm pretty sure it's not a DNS-issue, since the problem is evident even when accessing the raw IP, eg. http://130.226.142.141/ vs. http://130.226.142.141/foo. I'm thinking it's a bad config in Apache... any clues?

Read the article

MS SQL Server 2005 Express rebuild master DB problem

- by PaN1C_Showt1Me

Hi ! There has been a power loss on our server and i cannot start the SQL service because the master DB is corrupted (as the log states). I found many articles recommending running the setup.exe with optional parameters: This is what I did: I've downloaded SQLEXPR32.EXE from MS page and ran it The first problem was, that it extracted all the setup files and started the default installation procedure. (which was unuseful for me as I need those params). If I canceled it, all the extracted files disappeared. That's why I decided to copy the extracted files somewhere and than cancel the default installation. Now I'm trying to run the setup.exe from the extraction: setup.exe /qb INSTANCENAME=MSSQLSERVER REINSTALL=SQL_Engine REBUILDDATABASE=1 SAPWD=xxxxx it asks me if I want to rewrite the system db, which is what I need, but then while installing I get this error: *An installation package for the product Microsoft SQL Server 2005 Express Edition cannot be found. Try the installation again using a valid copy of the installation package 'SqlRun_SQL.msi'* Then it tries to install something and it states: cannot install because the same instance name already exists. But I don't want to install a new instance .. Any idea how to solve this, please? Thank you in advance !

Read the article

PHP & IIS 6 Encoding problem

- by Alexander

The server is running Windows 2003 with IIS 6.0.3790.1830 x86 (iis.dll). My database server is Microsoft SQL Server 2000. My PHP version is 5.3. The original application is hosted on appserv1 and it's database is on dbserv1. It's working fine, everything is tuned up, running great. It was needed to place the same application (different modules) on another server, for other uses, so I copied the database on dbserv2, configured appserv2 to host the application, so I achieved 2 almost identical copies. Both dbserv1 and dbserv2 use the same encoding, both appserv1 and appserv2 are on IIS6 with the same PHP configurations. I also tried my best to have the same settings in the IIS. I also made sure that I pass the encoding information both in the HTTP headers and in the meta tags with http-equiv. Both applications use utf-8. The Problem is that the copy of the application doesn't display the non-ASCII characters normally in the browser, even if the browser detects correctly the UTF-8 encoding of the page. First I thought it was a database issue, given the fact that MSSQL 2000 doesn't support UTF-8, and instead it uses UCS-2, but when I redirected the application on appserv2 to work with the database on dbserv1, it had the same encoding problems. This is why I am asking in what way I can make it work. thank you for reading.

Read the article

Problem using a public key when connecting to a SSH server running on Cygwin

- by binary255

We have installed Cygwin on a Windows Server 2008 Standard server and it working pretty well. Unfortunately we still have a big problem. We want to connect using a public key through SSH which doesn't work. It always falls back to using password login. We have appended our public key to ~/.ssh/authorized_keys on the server and we have our private and public key in ~/.ssh/id_dsa respective ~/.ssh/id_dsa.pub on the client. When debugging the SSH login session we see that the key is offered by the server apparently rejects it by some unknown reason. The SSH output when connecting from an Ubuntu 9.10 desktop with debug information enabled: $ ssh -v 192.168.10.11 OpenSSH_5.1p1 Debian-6ubuntu2, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /home/myuseraccount/.ssh/config debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for debug1: Connecting to 192.168.10.11 [192.168.10.11] port 22. debug1: Connection established. debug1: identity file /home/myuseraccount/.ssh/identity type -1 debug1: identity file /home/myuseraccount/.ssh/id_rsa type -1 debug1: identity file /home/myuseraccount/.ssh/id_dsa type 2 debug1: Checking blacklist file /usr/share/ssh/blacklist.DSA-1024 debug1: Checking blacklist file /etc/ssh/blacklist.DSA-1024 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '192.168.10.11' is known and matches the RSA host key. debug1: Found key in /home/myuseraccount/.ssh/known_hosts:12 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Offering public key: /home/myuseraccount/.ssh/id_dsa debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Trying private key: /home/myuseraccount/.ssh/identity debug1: Trying private key: /home/myuseraccount/.ssh/id_rsa debug1: Next authentication method: keyboard-interactive debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: password [email protected]'s password: The version of Cygwin: $ uname -a CYGWIN_NT-6.0 servername 1.7.1(0.218/5/3) 2009-12-07 11:48 i686 Cygwin The installed packages: $ cygcheck -c Cygwin Package Information Package Version Status _update-info-dir 00871-1 OK alternatives 1.3.30c-10 OK arj 3.10.22-1 OK aspell 0.60.5-1 OK aspell-en 6.0.0-1 OK aspell-sv 0.50.2-2 OK autossh 1.4b-1 OK base-cygwin 2.1-1 OK base-files 3.9-3 OK base-passwd 3.1-1 OK bash 3.2.49-23 OK bash-completion 1.1-2 OK bc 1.06-2 OK bzip2 1.0.5-10 OK cabextract 1.1-1 OK compface 1.5.2-1 OK coreutils 7.0-2 OK cron 4.1-59 OK crypt 1.1-1 OK csih 0.9.1-1 OK curl 7.19.6-1 OK cvs 1.12.13-10 OK cvsutils 0.2.5-1 OK cygrunsrv 1.34-1 OK cygutils 1.4.2-1 OK cygwin 1.7.1-1 OK cygwin-doc 1.5-1 OK cygwin-x-doc 1.1.0-1 OK dash 0.5.5.1-2 OK diffutils 2.8.7-2 OK doxygen 1.6.1-2 OK e2fsprogs 1.35-3 OK editrights 1.01-2 OK emacs 23.1-10 OK emacs-X11 23.1-10 OK file 5.04-1 OK findutils 4.5.5-1 OK flip 1.19-1 OK font-adobe-dpi75 1.0.1-1 OK font-alias 1.0.2-1 OK font-encodings 1.0.3-1 OK font-misc-misc 1.1.0-1 OK fontconfig 2.8.0-1 OK gamin 0.1.10-10 OK gawk 3.1.7-1 OK gettext 0.17-11 OK gnome-icon-theme 2.28.0-1 OK grep 2.5.4-2 OK groff 1.19.2-2 OK gvim 7.2.264-1 OK gzip 1.3.12-2 OK hicolor-icon-theme 0.11-1 OK inetutils 1.5-6 OK ipc-utils 1.0-1 OK keychain 2.6.8-1 OK less 429-1 OK libaspell15 0.60.5-1 OK libatk1.0_0 1.28.0-1 OK libaudio2 1.9.2-1 OK libbz2_1 1.0.5-10 OK libcairo2 1.8.8-1 OK libcurl4 7.19.6-1 OK libdb4.2 4.2.52.5-2 OK libdb4.5 4.5.20.2-2 OK libexpat1 2.0.1-1 OK libfam0 0.1.10-10 OK libfontconfig1 2.8.0-1 OK libfontenc1 1.0.5-1 OK libfreetype6 2.3.12-1 OK libgcc1 4.3.4-3 OK libgdbm4 1.8.3-20 OK libgdk_pixbuf2.0_0 2.18.6-1 OK libgif4 4.1.6-10 OK libGL1 7.6.1-1 OK libglib2.0_0 2.22.4-2 OK libglitz1 0.5.6-10 OK libgmp3 4.3.1-3 OK libgtk2.0_0 2.18.6-1 OK libICE6 1.0.6-1 OK libiconv2 1.13.1-1 OK libidn11 1.16-1 OK libintl3 0.14.5-1 OK libintl8 0.17-11 OK libjasper1 1.900.1-1 OK libjbig2 2.0-11 OK libjpeg62 6b-21 OK libjpeg7 7-10 OK liblzma1 4.999.9beta-10 OK libncurses10 5.7-18 OK libncurses8 5.5-10 OK libncurses9 5.7-16 OK libopenldap2_3_0 2.3.43-1 OK libpango1.0_0 1.26.2-1 OK libpcre0 8.00-1 OK libpixman1_0 0.16.6-1 OK libpng12 1.2.35-10 OK libpopt0 1.6.4-4 OK libpq5 8.2.11-1 OK libreadline6 5.2.14-12 OK libreadline7 6.0.3-2 OK libsasl2 2.1.19-3 OK libSM6 1.1.1-1 OK libssh2_1 1.2.2-1 OK libssp0 4.3.4-3 OK libstdc++6 4.3.4-3 OK libtiff5 3.9.2-1 OK libwrap0 7.6-20 OK libX11_6 1.3.3-1 OK libXau6 1.0.5-1 OK libXaw3d7 1.5D-8 OK libXaw7 1.0.7-1 OK libxcb-render-util0 0.3.6-1 OK libxcb-render0 1.5-1 OK libxcb1 1.5-1 OK libXcomposite1 0.4.1-1 OK libXcursor1 1.1.10-1 OK libXdamage1 1.1.2-1 OK libXdmcp6 1.0.3-1 OK libXext6 1.1.1-1 OK libXfixes3 4.0.4-1 OK libXft2 2.1.14-1 OK libXi6 1.3-1 OK libXinerama1 1.1-1 OK libxkbfile1 1.0.6-1 OK libxml2 2.7.6-1 OK libXmu6 1.0.5-1 OK libXmuu1 1.0.5-1 OK libXpm4 3.5.8-1 OK libXrandr2 1.3.0-10 OK libXrender1 0.9.5-1 OK libXt6 1.0.7-1 OK links 1.00pre20-1 OK login 1.10-10 OK luit 1.0.5-1 OK lynx 2.8.5-4 OK man 1.6e-1 OK minires 1.02-1 OK mkfontdir 1.0.5-1 OK mkfontscale 1.0.7-1 OK openssh 5.4p1-1 OK openssl 0.9.8m-1 OK patch 2.5.8-9 OK patchutils 0.3.1-1 OK perl 5.10.1-3 OK rebase 3.0.1-1 OK run 1.1.12-11 OK screen 4.0.3-5 OK sed 4.1.5-2 OK shared-mime-info 0.70-1 OK tar 1.22.90-1 OK terminfo 5.7_20091114-13 OK terminfo0 5.5_20061104-11 OK texinfo 4.13-3 OK tidy 041206-1 OK time 1.7-2 OK tzcode 2009k-1 OK unzip 6.0-10 OK util-linux 2.14.1-1 OK vim 7.2.264-2 OK wget 1.11.4-4 OK which 2.20-2 OK wput 0.6.1-2 OK xauth 1.0.4-1 OK xclipboard 1.1.0-1 OK xcursor-themes 1.0.2-1 OK xemacs 21.4.22-1 OK xemacs-emacs-common 21.4.22-1 OK xemacs-sumo 2007-04-27-1 OK xemacs-tags 21.4.22-1 OK xeyes 1.1.0-1 OK xinit 1.2.1-1 OK xinput 1.5.0-1 OK xkbcomp 1.1.1-1 OK xkeyboard-config 1.8-1 OK xkill 1.0.2-1 OK xmodmap 1.0.4-1 OK xorg-docs 1.5-1 OK xorg-server 1.7.6-2 OK xrdb 1.0.6-1 OK xset 1.1.0-1 OK xterm 255-1 OK xz 4.999.9beta-10 OK zip 3.0-11 OK zlib 1.2.3-10 OK zlib-devel 1.2.3-10 OK zlib0 1.2.3-10 OK The ssh deamon configuration file: $ cat /etc/sshd_config # $OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/bin:/usr/sbin:/sbin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. Port 22 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # Disable legacy (protocol version 1) support in the server for new # installations. In future the default will change to require explicit # activation of protocol 1 Protocol 2 # HostKey for protocol version 1 #HostKey /etc/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh_host_rsa_key #HostKey /etc/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 1024 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes StrictModes no #MaxAuthTries 6 #MaxSessions 10 RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. #UsePAM no AllowAgentForwarding yes AllowTcpForwarding yes GatewayPorts yes X11Forwarding yes X11DisplayOffset 10 X11UseLocalhost no #PrintMotd yes #PrintLastLog yes TCPKeepAlive yes #UseLogin no UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner none # override default of no subsystems Subsystem sftp /usr/sbin/sftp-server # Example of overriding settings on a per-user basis #Match User anoncvs #X11Forwarding yes #AllowTcpForwarding yes #ForceCommand cvs server I hope this information is enough to solve the problem. In case any more is needed please comment and I'll add it. Thank you for reading!

Search Results

Search found 68828 results on 2754 pages for 'knapsack problem'.

Page 64/2754 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71 | Next Page >

- by Sky Chen

- by user388346

- by Jordan Pagaduan

- by John L

- by Yashwant Chavan

- by emzero

- by Gatura

- by Muntasir

- by jatanp

- by Pablo

- by user2059

- by Catalin

- by tearman

- by user70523

- by Hristo

- by Domchi

- by Carson Myers

- by zvikico

- by Tobias Tromm

- by Mario

- by Zeeshan Rang

- by friism

- by PaN1C_Showt1Me

- by Alexander

- by binary255

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71 | Next Page >