Search Results

Search found 4238 results on 170 pages for 'lost soul'.

Page 64/170 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

• Using VLANs that are routed together?

  - by dannymcc

  I have a quick question that's bugging me the more I read about VLANs. So far I understand that they are useful for dividing the network into sub-sections, but if you route them together does that not remove any security benefit? As an example, if I created a VLAN on my home network which was simply one computer, one server and one router.if I wanted to divide the network between computers and servers I could put the computer on VLAN 10 and the server on VLAN 20. Then the computer would no longer be able to communicate with the server - unless I added a static route to the router that connected the two together, basically telling VLAN 10 that VLAN 20 exists and how to communicate with it. The VLANs would then be connected in a similar way to a 'flat' network that has no VLANs. Therefore, surely, all security benefits are lost. Am I missing something?

  Read the article

• windows 7 crash during hibernation

  - by Andrew Fforts

  At times, when I hibernate my Dell Latitude e6400 with Windows 7 (64 bit), the laptop screen goes black as it should, but then it takes several minutes before it powers down. Then, when I attempt to "resume," Windows boots up from a fresh startup, with all my work lost, and tells me that it's recovered from a serious error. What can I do to resolve this problem? Other background info: -I got a new hard drive with plenty of space about a year ago; I only use a small fraction of that space. This sometimes happens when I don't have any programs running at all. If it's relevant, I do have Dropbox and OneDrive running in the background, though. -The problem usually occurs when I hibernate just after I unplug from an external monitor to bring my laptop home, but I believe it happens at other times, too. Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.4 Locale ID: 1033 Additional information about the problem: BCCode: 1000009f BCP1: 0000000000000004 BCP2: 0000000000000258 BCP3: FFFFFA80036DEB50 BCP4: FFFFF80000B9C510 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1

  Read the article

• Mac OSX Server 10.6 DNS Issues

  - by dallasclark

  Hi, The server was upgraded from 10.5 from 10.6, during the upgrade the Reverse Zones were lost so I tried to recreate these but found that it's best to delete all zones, definitions and start again. So I've started again and Reverse Zones are appearing but I'm still having issues. I receive the following errors (if they help) 01-Nov-2010 12:52:01.254 client 192.168.1.52#57051: view com.apple.ServerAdmin.DNS.public: query (cache) 'server.dev.home.gateway/A/IN' denied 01-Nov-2010 12:59:24.487 client 192.168.1.52#52858: view com.apple.ServerAdmin.DNS.public: query (cache) 'earth.server.dev.home.gateway/A/IN' denied At the moment I have the following setup in the DNS 1.168.192.in-addr.arpa. Reverse Zone 192.168.1.100 Reverse Mapping MacPro-Server.local. server.dev. Primary Zone server.dev. Machine 192.168.1.100 earth.server.dev. Alias server.dev.

  Read the article

• Amazon EC2 EBS volume scheduled backup/snapshots using puppet / similar tools

  - by Ehrann Mehdan

  I am not a Linux admin, although I wish I was, and I have seen these questions Amazon EC2 Backup Strategy Amazon EC2 + EBS:: Regular backup plan? Simple Backup Strategy for Amazon EC2 instances / volumes? And this suggestion http://alestic.com/2009/09/ec2-consistent-snapshot I tried using command line + crontab (the command line works, but crontab for some reason, doesn't) But I'm still pretty lost, all I want is an automated, rolling backup of my amazon EC2 (EBS) data (by rolling I mean keep 3-4 weeks back, but delete old snapshots as new ones come for cost control) And as things usually go, if there is something that is hard and painful, someone creates a solution for it. My question is simple, is there a way using a tool like Puppet to do it without a painful learning curve? (or via other tools like http://ylastic.com) If yes, how?

  Read the article

• Is putting the swapfile & temp folder to ramdisk a good idea in Windows 7 64 bit with lots of RAM?

  - by Tony_Henrich

  I want my Windows to run as fast as possible. If I have 12GB RAM in Windows 7 64bit, quad core CPU, and all apps fit in memory, will the swap file ever be used for anything? The question is about if it's a good idea to put the swap file in a RAM disk. Would a RAM disk help in any way or will Windows intelligently use all the available memory for all its work? I am also thinking of putting the temp folder on a RAM disk. I know the RAM disk is volatile memory and I don't care about its content if it gets lost.

  Read the article

• How can I see logs in a server after a kernel panic hang ?

  - by Low Kian Seong

  I am running a production gentoo Linux machine, and recently there was a situation where the server hung in my co-located premises and when I got there I noticed that the server was hung on what appeared to be a kernel panic hang. I rebooted the machine with a hard reboot and was disappointed to find out that I could not find a shred of evidence anywhere on why the machine hung. Is it true that when I do a hard reboot the messages itself will get lost or is there a setting I can do somewhere say in syslog-ng or maybe in sysctl to at least preserve the error log so that I can prevent such mishaps from happening in the future ? I am running a 2.6.x kernel by the way. Thanks in advance.

  Read the article

• Windows 7 loses access to network drives

  - by dubRun

  Ok this is an odd one, but is happening often enough its getting quite annoying. I recently installed Windows 7 on my work computer (about 2 months ago) and every so often I lose access to network shares on our work network. Its one server in particular - other shares are still working fine. I have a number of folders mapped as a drive, and all of the ones on a particular file server have lost access. If I try to access the machine directly (\fileserver\d$) it doesn't work either with this message: Windows cannot access \fileserver\d$. You do not have permission to access \fileserver\d$. Contact your network administrator to request access Once I reboot the computer, access is restored like it should be. The computers are all on a domain and my user has administrator level access to the server in question.

  Read the article

• Is it possible to disable the retry mechanism in Exim

  - by Tony Meyer

  I have a very simple Exim configuration that's just forwarding all mail to a set of destination addresses. When immediate delivery to an address fails, the message is added to the queue (and then processed by the retry rules). I want to change this so that if immediately delivery fails, the message is :blackhole:d. (It's ok if a bounce is generated instead, as I'll just redirect the bounce to the :blackhole:). This needs to occur for temporary failures (i.e. 4xx) as well as permanent (i.e. 5xx) ones. I understand that this means that if delivery can't be done immediately the message will be permanently and irretrievably lost. In this particular context, that isn't a problem. Reading over this, it sounds suspiciously like "how can I improve my spamming Exim server". That really isn't what this is for, and if you can figure out a way I can prove that, I'm happy to do so!

  Read the article

• Extract cert and private key from JKS keystore to use it in Apache2 httpd

  - by momo

  I tried to find this but no luck. I created a JKS keystore and generated a CSR, then imported the signed cert and intermediate and root CA certs. Used this keystore on Tomcat without problems. Now I want to use the same cert for Apache2 http server on the same machine. I actually want to set up mod_jk to redirect /*.jsp and servlets paths to Tomcat and serve the static content and PHP from Apache2. I tried to convert JKS to PKCS12 with keytool to afterwards handle it with openssl with a command like this: keytool -importkeystore -srckeystore foo.jks \ -destkeystore foo.p12 \ -srcstoretype jks \ -deststoretype pkcs12 The problem is only the cert is exported but not the rest of the chain. I actually used this keystore on Apache and it complained about key and cert don't matching (not sure if it's related to the chain or not). Can anyone point me on the right direction? I am not a server guy and I am kinda lost with all this things :-(

  Read the article

• What's the entry path towards a database administrator job?

  - by FarmBoy

  I've recently lost my job, and I'm working towards changing vocations. My degrees are in Mathematics, but I'm interested in IT, particularly working as a DBA or a programmer. I don't have IT experience, but I have the resourses to be patient with the transition, and I'm currently learning SQL and Java. Obviously, I need some job experience. My question is this: What entry-level jobs might allow me to gain useful experience towards obtaining a DBA job? It seems to me that programmers often start as testers, and system administrators could start at a help-desk position, but it is unclear how one begins to work with a company's database.

  Read the article

• Running bridged-networking vmware player on a Linux machine with 2 interfaces

  - by Roman D

  I have got a laptop running Arch Linux with 2 interfaces: wireless (wlan0) and ethernet (eth0). I use wlan0 to access internet (static IP, networking is configured using netcfg), and I connect a second PC to the eth0. Now, whenever I start vmware player (v. 4.0.4), it chooses wlan0 to connect its bridged virtual NIC to, but I need it to connect to eth0 (I want my guest machine to be able to talk to the second physical PC on eth0). So, I disable the wlan0 interface (netcfg -d wireless) and restart vmware. Now, it connects to eth0, and everything works fine; I can ping the host PC from the virtual one, and I can ping the virtual PC from the second physical PC connected to eth0. Then, if I try to reenable the wlan0 interface (netcfg -u wireless), all of the connectivity between the host and the guest (and between the second physical PC and the guest) gets lost, until I disable wlan0 again. Can someone please give me a hint on what's going on?

  Read the article

• Windows 2008R2 two node failover cluster creation fails

  - by Francois Wolmarans

  We have just installed two Windows 2008R2 Enterprise machines with identical hardware. When running the cluster validation everything is ok. When creating the cluster it fails with the following error: An error occurred while creating the cluster. An error occurred creating cluster 'CLUSTER04'. The parameter is incorrect The logfile on the first node where we are running our config from, does not show any errors. On the second node we get: The Cluster service is shutting down because quorum was lost. This could be due to the loss of network connectivity between some or all nodes in the cluster, or a failover of the witness disk. I've double checked and all communication between the servers are fine. Even when creating a one node cluster it gives the error. There are other failover clusters we have setup without any issues.

  Read the article

• Share the DVB card on windows 7

  - by Bashar Kernel

  I have 2 computers connected to a router and I have a DVB card in one of them. I want to use the one DVB card to feed both of them. I read about it and I know that I want to share the DVB adapter with the Internet Connection Sharing on the LAN network. But when I use the connection sharing, I lose my internet access I tried to use "Bridge Connection", but then I also lost my internet access too. Can any one tell me how to fix this problem? And how to view the channels (for example how to use the VLC)?

  Read the article

• Stress test speed on a gateway?

  - by TheLQ

  I'm interested in stress testing my gateway server but am lost on how. Most of the stress testing applications I've seen only see how much load an app like Apache can handle, but not this. Essentially I want to send as many packets I can into this box with one computer on one card and see how many come out the other in another computer just to get an idea of what kind of load this can handle. I'm also interested how Snort will perform. I'm not really sure how to do this though. What tools could you recommend that could do this?

  Read the article

• Round robin DNS for dynamic website

  - by Uwe

  We want to setup multiple servers hosting the same site. Each server (iis6 or iis7) is on its own. Meaning it does not sjare any information with the others. They are not even in the same country. The problem we encounter is that if we setup a round-robin DNS (multiple IDs under one Domainname) is that the client (browser) switches the servers so that the asp.net session gets lost. The question is how do we set this up, so the clients are randomly send to one of the servers and if one fails the users go to the next one. But if a user is using one of the it should stay there. Thank you!

  Read the article

• How can I delete virtual networks from command line?

  - by David Cobb

  I have Hyper-V Server 2008 R2 (without GUI) running at my colo for a week. I was connected via RDP and could use the menu interface and command line. I figured out how to connect Hyper-V Manager from my Win7 laptop (THANK YOU HVREMOTE!), and created and installed my VM. I created a virtual network that didn't work (no connectivity from my VM) so I created another using different settings, and now have lost access to the Hyper-V host. No ping, no RDP. Since I don't have console access, I cannot troubleshoot. I believe if I deleted the Virtual Networks I'd regain access, but I need a command line instruction for this, that the staff onsite could enter to accomplish this. I find no help anywhere obvious (MSDN, etc), the keywords are too general. Can anyone refer me to simple steps how to do this over command line or with the menu based interface on the console?

  Read the article

• Windows Storage Server 2003 R2 RDP Disconnection

  - by Antitribu

  I am unable to remote desktop to our Windows Storage Server 2003 R2 machine. There are a few people about with similar issues but no answers around. Symantec End Point is installed but no network protection. Using rdesktop in Linux I receive: ERROR: send: Connection reset by peer NOT IMPLEMENTED: PDU 12 ERROR: Connection closed Where the "PDU XX" number changes on each connection. In windows using the latest mstsc I receive: The connection was lost due to a network error. Try connecting again. If the problem persists, contact your network Administrator. Any ideas?

  Read the article

• Map /dev/bus/usb node to /sys node on Linux

  - by Cody Brocious

  I'm using libusb to find and access a USB device, but once I get the information I need from there, I need to map it to a /sys node. This could be to the actual USB bus it's on, the /sys/bus/usb-serial node (which is where I'm going to get eventually), or effectively anywhere else since I can walk the tree from there. I can get to a /dev/bus/usb node easily enough, but I'm a bit lost from there. What would be the best route to perform this mapping? Alternatively, a way to get the /dev/ttyUSB device node for a /dev/bus/usb node would work as well, since it gets me the same result.

  Read the article

• How to relink user folders in Windows 7

  - by Jonathan

  The short story: Win7 lost track of my user folders location (desktop, my documents, my pictures etc...). They now reside on a different partition. How can I relink these folders? The long story: The way I partition my drives is: C: - SSD drive for Windows and Program Files D: - A large regular hard drive for all my user data The first thing I do after a fresh Win7 install is move my user folders to D:, by right clicking on these folders under C:\users\username\, choosing the Location tab and clicking on Move. I've just completed encryption of D: using TrueCrypt. It shows a lot of warnings before the encryption process, but (hrrmm...) it does not mention the fact that after encryption the data is located on a new drive letter, say E: This broke Win7's links to my special user folders. How can I relink these folders?

  Read the article

• [Windows Live Messenger] Beta sounds

  - by sinni800

  Hello, in a beta version of the Windows Live Messenger they had different sounds once. They weren't like the current ones, they sounded brighter. The normal "dling" when logging in was replaced by a more direct "DIING!". It was only like that in one beta version thought. I was already searching for it when it was replaced back again, but I lost the exe file back then. Anyone know of this? Anyone else? Please!

  Read the article

• Recovered all previous data of partition in Windows

  - by Komal Sorathiya

  My whole drive data is lost because I installed ubuntu. After that, I formatted my Laptop and make new drives. in which, one partition is cant accessible because its a raw partition. I recovered some data from that partition using iCare Recovery Software. Then, I fully format that partition, and I put data in that place. I remove all files from that. My problem is that I want to recover my data which is deleted because of ubuntu.. I can recover the most recent data from iCare Recovery, but i cannot recover previous data.. Please, help me for that. I am trying this from many days. Thanks

  Read the article

• HowTo access Samba Share over VPN Tunnel?

  - by Jeff

  I don't know how to access a Samba share running on a Ubuntu 10.04 server through OpenVPN 2.1.0. I've installed & configured OpenVPN and everything works. The server end of the tunnel has the IP of 10.8.0.1. When I connect from XP (over our local network) I'm given the IP of 10.8.0.6. I can ping and trace route from both ends of the tunnel. Now, I'm lost...how to access the Samba share from XP and from OS X?

  Read the article

• MOSS 2007 links issue

  - by r0ca

  I have a user that for some reason lost her "My Site" & "My Links" link on her local computer. When she logs into a Citrix server she can see them. I have had her dump temp Internet files and put the site in her trusted sites but nothing is working. I think thins started after some Windows updates but not sure. Any ideas on this one? BTW, it's not turned off kin Central Admin and none of her group memberships have changed.

  Read the article

• MOSS 2007 links issue

  - by r0ca

  I have a user that for some reason lost her "My Site" & "My Links" link on her local computer. When she logs into a Citrix server she can see them. I have had her dump temp Internet files and put the site in her trusted sites but nothing is working. I think thins started after some Windows updates but not sure. Any ideas on this one? BTW, it's not turned off kin Central Admin and none of her group memberships have changed.

  Read the article

• Windows Scheduled Tasks losing password configuration

  - by E Brown

  I have a couple of jobs scheduled to run daily on a customer server running Windows Server 2003 Standard Edition, SP1 using Windows Scheduled Tasks. The tasks are set to run as a user that is in the Administrators group, and were scheduled as that same user. The password of that user is set to never expire. These tasks fail to run pretty much every day. Going into Scheduled Tasks and attempting to run the tasks manually indicates that the password is incorrect. I go into the task properties, retype the password into the appropriate fields, click OK, and attempt to run the task manually again. Now it works fine. What might be the cause of the password being lost like this? These same tasks are running on other customers servers with no problems. Thanks in advance for any thoughts.

  Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >