Search Results

Search found 5176 results on 208 pages for 'max fraser'.

Page 64/208 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

• The ping response time doesn't reflect the real network response time

  - by yangchenyun

  I encountered a weird problem that the response time returned by ping is almost fixed at 98ms. Either I ping the gateway, or I ping a local host or a internet host. The response time is always around 98ms although the actual delay is obvious. However, the reverse ping (from a local machine to this host) works properly. The following is my route table and the result: route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 100 0 0 eth1 60.194.136.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 # ping the gateway ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_req=1 ttl=64 time=98.7 ms 64 bytes from 192.168.1.1: icmp_req=2 ttl=64 time=97.0 ms 64 bytes from 192.168.1.1: icmp_req=3 ttl=64 time=96.0 ms 64 bytes from 192.168.1.1: icmp_req=4 ttl=64 time=94.9 ms 64 bytes from 192.168.1.1: icmp_req=5 ttl=64 time=94.0 ms ^C --- 192.168.1.1 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 94.030/96.149/98.744/1.673 ms #ping a local machine ping 192.168.1.88 PING 192.168.1.88 (192.168.1.88) 56(84) bytes of data. 64 bytes from 192.168.1.88: icmp_req=1 ttl=64 time=98.7 ms 64 bytes from 192.168.1.88: icmp_req=2 ttl=64 time=96.9 ms 64 bytes from 192.168.1.88: icmp_req=3 ttl=64 time=96.0 ms 64 bytes from 192.168.1.88: icmp_req=4 ttl=64 time=95.0 ms ^C --- 192.168.1.88 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 95.003/96.696/98.786/1.428 ms #ping a internet host ping google.com PING google.com (74.125.128.139) 56(84) bytes of data. 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=1 ttl=42 time=99.8 ms 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=2 ttl=42 time=99.9 ms 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=3 ttl=42 time=99.9 ms 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=4 ttl=42 time=99.9 ms ^C64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=5 ttl=42 time=99.9 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 32799ms rtt min/avg/max/mdev = 99.862/99.925/99.944/0.284 ms I am running iperf to test the bandwidth, the rate is quite low for a LAN connection. iperf -c 192.168.1.87 -t 50 -i 10 -f M ------------------------------------------------------------ Client connecting to 192.168.1.87, TCP port 5001 TCP window size: 0.06 MByte (default) ------------------------------------------------------------ [ 4] local 192.168.1.139 port 54697 connected with 192.168.1.87 port 5001 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.0 sec 6.12 MBytes 0.61 MBytes/sec [ 4] 10.0-20.0 sec 6.38 MBytes 0.64 MBytes/sec [ 4] 20.0-30.0 sec 6.38 MBytes 0.64 MBytes/sec [ 4] 30.0-40.0 sec 6.25 MBytes 0.62 MBytes/sec [ 4] 40.0-50.0 sec 6.38 MBytes 0.64 MBytes/sec [ 4] 0.0-50.1 sec 31.6 MBytes 0.63 MBytes/sec

  Read the article

• .htaccess template, suggestions needed

  - by purpler

  DefaultLanguage en-US FileETag None Header unset ETag ServerSignature Off SetEnv TZ Europe/Belgrade # Rewrites Options +FollowSymLinks RewriteEngine On RewriteBase / # Redirect to WWW RewriteCond %{HTTP_HOST} ^serpentineseo.com RewriteRule (.*) http://www.serpentineseo.com/$1 [R=301,L] # Redirect index to root RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /.*index\.html\ HTTP/ RewriteRule ^(.*)index\.html$ /$1 [R=301,L] # Cache media files: ExpiresActive On ExpiresDefault A0 # Month <filesMatch "\.(gif|jpg|jpeg|png|ico|swf|js)$"> Header set Cache-Control "max-age=2592000, public" </filesMatch> # Week <FilesMatch "\.(css|pdf)$"> Header set Cache-Control "max-age=604800" </FilesMatch> # 10 Min <FilesMatch "\.(html|htm|txt)$"> Header set Cache-Control "max-age=600" </FilesMatch> # Do not cache <FilesMatch "\.(pl|php|cgi|spl|scgi|fcgi)$"> Header unset Cache-Control </FilesMatch> # Compress output <IfModule mod_deflate.c> <FilesMatch "\.(html|js|css)$"> SetOutputFilter DEFLATE </FilesMatch> </IfModule> # Error Documents ErrorDocument 206 /error/206.html ErrorDocument 401 /error/401.html ErrorDocument 403 /error/403.html ErrorDocument 404 /error/404.html ErrorDocument 500 /error/500.html # Prevent hotlinking RewriteCond %{HTTP_REFERER} !^$ RewriteCond %{HTTP_REFERER} !^http://(www\.)?serpentineseo.com/.*$ [NC] RewriteRule \.(gif|jpg|png)$ http://www.serpentineseo.com/images/angryman.png [R,L] # Prevent offline browsers RewriteCond %{HTTP_USER_AGENT} ^BlackWidow [OR] RewriteCond %{HTTP_USER_AGENT} ^Bot\ mailto:[email protected] [OR] RewriteCond %{HTTP_USER_AGENT} ^ChinaClaw [OR] RewriteCond %{HTTP_USER_AGENT} ^Custo [OR] RewriteCond %{HTTP_USER_AGENT} ^DISCo [OR] RewriteCond %{HTTP_USER_AGENT} ^Download\ Demon [OR] RewriteCond %{HTTP_USER_AGENT} ^eCatch [OR] RewriteCond %{HTTP_USER_AGENT} ^EirGrabber [OR] RewriteCond %{HTTP_USER_AGENT} ^EmailSiphon [OR] RewriteCond %{HTTP_USER_AGENT} ^EmailWolf [OR] RewriteCond %{HTTP_USER_AGENT} ^Express\ WebPictures [OR] RewriteCond %{HTTP_USER_AGENT} ^ExtractorPro [OR] RewriteCond %{HTTP_USER_AGENT} ^EyeNetIE [OR] RewriteCond %{HTTP_USER_AGENT} ^FlashGet [OR] RewriteCond %{HTTP_USER_AGENT} ^GetRight [OR] RewriteCond %{HTTP_USER_AGENT} ^GetWeb! [OR] RewriteCond %{HTTP_USER_AGENT} ^Go!Zilla [OR] RewriteCond %{HTTP_USER_AGENT} ^Go-Ahead-Got-It [OR] RewriteCond %{HTTP_USER_AGENT} ^GrabNet [OR] RewriteCond %{HTTP_USER_AGENT} ^Grafula [OR] RewriteCond %{HTTP_USER_AGENT} ^HMView [OR] RewriteCond %{HTTP_USER_AGENT} HTTrack [NC,OR] RewriteCond %{HTTP_USER_AGENT} ^Image\ Stripper [OR] RewriteCond %{HTTP_USER_AGENT} ^Image\ Sucker [OR] RewriteCond %{HTTP_USER_AGENT} Indy\ Library [NC,OR] RewriteCond %{HTTP_USER_AGENT} ^InterGET [OR] RewriteCond %{HTTP_USER_AGENT} ^Internet\ Ninja [OR] RewriteCond %{HTTP_USER_AGENT} ^JetCar [OR] RewriteCond %{HTTP_USER_AGENT} ^JOC\ Web\ Spider [OR] RewriteCond %{HTTP_USER_AGENT} ^larbin [OR] RewriteCond %{HTTP_USER_AGENT} ^LeechFTP [OR] RewriteCond %{HTTP_USER_AGENT} ^Mass\ Downloader [OR] RewriteCond %{HTTP_USER_AGENT} ^MIDown\ tool [OR] RewriteCond %{HTTP_USER_AGENT} ^Mister\ PiX [OR] RewriteCond %{HTTP_USER_AGENT} ^Navroad [OR] RewriteCond %{HTTP_USER_AGENT} ^NearSite [OR] RewriteCond %{HTTP_USER_AGENT} ^NetAnts [OR] RewriteCond %{HTTP_USER_AGENT} ^NetSpider [OR] RewriteCond %{HTTP_USER_AGENT} ^Net\ Vampire [OR] RewriteCond %{HTTP_USER_AGENT} ^NetZIP [OR] RewriteCond %{HTTP_USER_AGENT} ^Octopus [OR] RewriteCond %{HTTP_USER_AGENT} ^Offline\ Explorer [OR] RewriteCond %{HTTP_USER_AGENT} ^Offline\ Navigator [OR] RewriteCond %{HTTP_USER_AGENT} ^PageGrabber [OR] RewriteCond %{HTTP_USER_AGENT} ^Papa\ Foto [OR] RewriteCond %{HTTP_USER_AGENT} ^pavuk [OR] RewriteCond %{HTTP_USER_AGENT} ^pcBrowser [OR] RewriteCond %{HTTP_USER_AGENT} ^RealDownload [OR] RewriteCond %{HTTP_USER_AGENT} ^ReGet [OR] RewriteCond %{HTTP_USER_AGENT} ^SiteSnagger [OR] RewriteCond %{HTTP_USER_AGENT} ^SmartDownload [OR] RewriteCond %{HTTP_USER_AGENT} ^SuperBot [OR] RewriteCond %{HTTP_USER_AGENT} ^SuperHTTP [OR] RewriteCond %{HTTP_USER_AGENT} ^Surfbot [OR] RewriteCond %{HTTP_USER_AGENT} ^tAkeOut [OR] RewriteCond %{HTTP_USER_AGENT} ^Teleport\ Pro [OR] RewriteCond %{HTTP_USER_AGENT} ^VoidEYE [OR] RewriteCond %{HTTP_USER_AGENT} ^Web\ Image\ Collector [OR] RewriteCond %{HTTP_USER_AGENT} ^Web\ Sucker [OR] RewriteCond %{HTTP_USER_AGENT} ^WebAuto [OR] RewriteCond %{HTTP_USER_AGENT} ^WebCopier [OR] RewriteCond %{HTTP_USER_AGENT} ^WebFetch [OR] RewriteCond %{HTTP_USER_AGENT} ^WebGo\ IS [OR] RewriteCond %{HTTP_USER_AGENT} ^WebLeacher [OR] RewriteCond %{HTTP_USER_AGENT} ^WebReaper [OR] RewriteCond %{HTTP_USER_AGENT} ^WebSauger [OR] RewriteCond %{HTTP_USER_AGENT} ^Website\ eXtractor [OR] RewriteCond %{HTTP_USER_AGENT} ^Website\ Quester [OR] RewriteCond %{HTTP_USER_AGENT} ^WebStripper [OR] RewriteCond %{HTTP_USER_AGENT} ^WebWhacker [OR] RewriteCond %{HTTP_USER_AGENT} ^WebZIP [OR] RewriteCond %{HTTP_USER_AGENT} ^Wget [OR] RewriteCond %{HTTP_USER_AGENT} ^Widow [OR] RewriteCond %{HTTP_USER_AGENT} ^WWWOFFLE [OR] RewriteCond %{HTTP_USER_AGENT} ^Xaldon\ WebSpider [OR] RewriteCond %{HTTP_USER_AGENT} ^Zeus RewriteRule ^.*$ http://www.google.com [R,L] # Protect against DOS attacks by limiting file upload size LimitRequestBody 10240000 # Deny access to sensitive files <FilesMatch "\.(htaccess|psd|log)$"> Order Allow,Deny Deny from all </FilesMatch>

  Read the article

• Conflicting answers from du with different units

  - by dpitch40

  My question is quite simple. I get this output when checking the total amount of space I'm using on my Walkman. david@Milton:/media$ du -b --max-depth=0 WALKMAN/ 14823290693 WALKMAN/ david@Milton:/media$ du -k --max-depth=0 WALKMAN/ 14523776 WALKMAN/ Last I checked, 14,523,776 KB * 1024 = 14,872,646,624 B, not 14,823,290,693. Dividing the two, their "K" unit seems to be equal to about 1020.62 rather than 1024 as advertised. This is causing some errors in the program I wrote to sync my Walkman, so it fills up faster than it claims to. Can anyone explain this discrepency?

  Read the article

• Why isn't my algorithm for find the biggest and smallest inputs working?

  - by Matt Ellen

  I have started a new job, and with it comes a new language: Ironpython. Thankfully a good language :D Before starting I got to grips with Python on the whole, but that was only a week's worth of learning. Now I'm writing actual code. I've been charged with writing an algorithm that finds the best input parameter to collect data with. The basic algorithm is (as I've been instructed): Set the input parameter to a good guess Start collecting data When data is available stop collecting find the highest point If the point before this (i.e. for the previous parameter value) was higher and the point before that was lower then we've found the max otherwise the input parameter is increased by the initial guess. goto 2 If the max is found then the min needs to be found. To do this the algorithm carries on increasing the input, but by 1/10 of the max, until the current point is greater than the previous point and the point before that is also greater. Once the min is found then the algorithm stops. Currently I have a simplified data generator outputting the sin of the input, so that I know that the min value should be PI and the max value should be PI/2 The main Python code looks like this (don't worry, this is just for my edification, I don't write real code like this): import sys sys.path.append(r"F:\Programming Source\C#\PythonHelp\PythonHelp\bin\Debug") import clr clr.AddReferenceToFile("PythonHelpClasses.dll") import PythonHelpClasses from PHCStruct import Helper from System import Math helper = Helper() def run(): b = PythonHelpClasses.Executor() a = PythonHelpClasses.HasAnEvent() b.Input = 0.0 helper.__init__() def AnEventHandler(e): b.Stop() h = helper h.lastLastVal, h.lastVal, h.currentVal = h.lastVal, h.currentVal, e.Number if h.lastLastVal < h.lastVal and h.currentVal < h.lastVal and h.NotPast90: h.NotPast90 = False h.bestInput = h.lastInput inputInc = 0.0 if h.NotPast90: inputInc = Math.PI/10.0 else: inputInc = h.bestInput/10.0 if h.lastLastVal > h.lastVal and h.currentVal > h.lastVal and h.NotPast180: h.NotPast180 = False if h.NotPast180: h.lastInput, b.Input = b.Input, b.Input + inputInc b.Start(a) else: print "Best input:", h.bestInput print "Last input:", h.lastInput b.Stop() a.AnEvent += AnEventHandler b.Start(a) PHCStruct.py: class Helper(): def __init__(self): self.currentVal = 0 self.lastVal = 0 self.lastLastVal = 0 self.NotPast90 = True self.NotPast180 = True self.bestInput = 0 self.lastInput = 0 PythonHelpClasses has two small classes I wrote in C# before I realised how to do it in Ironpython. Executor runs a delegate asynchronously while it's running member is true. The important code: public void Start(HasAnEvent hae) { running = true; RunDelegate r = new RunDelegate(hae.UpdateNumber); AsyncCallback ac = new AsyncCallback(UpdateDone); IAsyncResult ar = r.BeginInvoke(Input, ac, null); } public void Stop() { running = false; } public void UpdateDone(IAsyncResult ar) { RunDelegate r = (RunDelegate)((AsyncResult)ar).AsyncDelegate; r.EndInvoke(ar); if (running) { AsyncCallback ac = new AsyncCallback(UpdateDone); IAsyncResult ar2 = r.BeginInvoke(Input, ac, null); } } HasAnEvent has a function that generates the sin of its input and fires an event with that result as its argument. i.e.: public void UpdateNumber(double val) { AnEventArgs e = new AnEventArgs(Math.Sin(val)); System.Threading.Thread.Sleep(1000); if (null != AnEvent) { AnEvent(e); } } The sleep is in there just to slow things down a bit. The problem I am getting is that the algorithm is not coming up with the best input being PI/2 and the final input being PI, but I can't see why. Also the best and final inputs are different each time I run the programme. Can anyone see why? Also when the algorithm terminates the best and final inputs are printed to the screen multiple times, not just once. Can someone explain why?

  Read the article

• Achieving/maxing out 1GBPS connectivity on a nginx server

  - by Ansell Cruz

  This page (http://www.remsys.com/nginx-on-1gbps) claims that it can max out a 1gbps line using JBOD setup and no raid. Currently I'm on a 1gbps dedicated port and I'm on raid 10 (4x2TB - the disks that comes with 100tb.com servers). Currently I'm only peaking at 500-550mbps. wa% would show something around 20% everytime. I'm looking into maxing out this 1gbps port because I have an unmetered service from them. Do you guys think that the page that I referenced would be better than my current raid setup? Do you guys have any other suggestions on how to max out the performance of this server? TYI.

  Read the article

• How to test KVM guest CPU maximum allocation limit?

  - by Ace

  Running Ubuntu 13.04 Host and vm Guest. Using virtio for hdd, nic. Max-allocaion CPU cores is 6, minimum is 2. Ive made a vm with virt-manager just to play with, and to test out kvm. Alright, I have a decent understand how the memory balloon driver works, but I still dont know how to test if the guest OS can utilize the max setting for cpu cores. From what i gather, the host will start one thread of qemu for each core allocated per vm. When i run htop inside the guest, it only shows two cores. (also here is the output of cat /proc/cpuinfo: https://gist.github.com/anonymous/93a361545130923537da ) How can I "force" the guest to allocate the other 4 cores so that it can show 6 cores in htop? Is there a way to do this?

  Read the article

• Overwrite SOA expiry in a bind9 slave name server.

  - by Joachim Breitner

  I run a slave name server of a domain that I do not have full control over (i.e. changing the SOA is not possibly). The SOA specifies an expiry time of one week. For various reasons, I’d like to override that value on my specific slave server to something larger. Is there a way to do that? N.B: I know that for the refresh and retry fields, bind9 provides the options min-refresh-time, max-refresh-time, min-retry-time and max-retry-time to overrule the SOA, as mentioned in the documentation. For some reason this just does not inclucde expiry.

  Read the article

• How can I set up OpenVPN to accept more than 60 connections?

  - by Robin

  Greetings! We're using OpenVPN and today hit an unexpected connection limit of 60 - even though max-clients is set to the source code default 1024. Server log: Tue Dec 21 13:49:41 2010 MULTI: new incoming connection would exceed maximum number of clients (60) We're slowly adding new clients to the VPN and expect to hit 200 some time next year, if we can get it working. We're running the server on a Win2003 R2. OpenVPN 2.0.9 Server config as follows: local 192.168.10.211 port 1195 proto tcp dev tun dev-node OpenVPN_Vision ca vision_ca.crt cert vision_server.crt key vision_server.key # This file should be kept secret dh vision_dh1024.pem server 192.168.211.0 255.255.255.0 ifconfig-pool-persist vision_ipp.txt ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 ;client-to-client keepalive 10 120 comp-lzo ;max-clients 100 # Default in source code is 1024 persist-key persist-tun status openvpn-status-vision.log log vision.log verb 3 I would greatly appreciate any help or input on this one. Thanks! Best regards, Robin

  Read the article

• Delphi7 - How can i copy a file that is being written to

  - by Simon

  I have an application that logs information to a daily text file every second on a master PC. A Slave PC on the network using the same application would like to copy this text file to its local drive. I can see there is going to be file access issues. These files should be no larger than 30-40MB each. the network will be 100MB ethernet. I can see there is potential for the copying process to take longer than 1 second meaning the logging PC will need to open the file for writing while it is being read. What is the best method for the file writing(logging) and file copying procedures? I know there is the standard Windows CopyFile() procedure, however this has given me file access problems. There is also TFileStream using the fmShareDenyNone flag, but this also very occasionally gives me an access problem too (like 1 per week). What is this the best way of accomplishing this task? My current File Logging: procedure FSWriteline(Filename,Header,s : String); var LogFile : TFileStream; line : String; begin if not FileExists(filename) then begin LogFile := TFileStream.Create(FileName, fmCreate or fmShareDenyNone); try LogFile.Seek(0,soFromEnd); line := Header + #13#10; LogFile.Write(line[1],Length(line)); line := s + #13#10; LogFile.Write(line[1],Length(line)); finally logfile.Free; end; end else begin line := s + #13#10; Logfile:=tfilestream.Create(Filename,fmOpenWrite or fmShareDenyNone); try logfile.Seek(0,soFromEnd); Logfile.Write(line[1], length(line)); finally Logfile.free; end; end; end; My file copy procedure: procedure DoCopy(infile, Outfile : String); begin ForceDirectories(ExtractFilePath(outfile)); //ensure folder exists if FileAge(inFile) = FileAge(OutFile) then Exit; //they are the same modified time try { Open existing destination } fo := TFileStream.Create(Outfile, fmOpenReadWrite or fmShareDenyNone); fo.Position := 0; except { otherwise Create destination } fo := TFileStream.Create(OutFile, fmCreate or fmShareDenyNone); end; try { open source } fi := TFileStream.Create(InFile, fmOpenRead or fmShareDenyNone); try cnt:= 0; fi.Position := cnt; max := fi.Size; {start copying } Repeat dod := BLOCKSIZE; // Block size if cnt+dod>max then dod := max-cnt; if dod>0 then did := fo.CopyFrom(fi, dod); cnt:=cnt+did; Percent := Round(Cnt/Max*100); until (dod=0) finally fi.free; end; finally fo.free; end; end;

  Read the article

• How to keep group-writeable shares on Samba with OSX clients?

  - by Oliver Salzburg

  I have a FreeNAS server on a network with OSX and Windows clients. When the OSX clients interact with SMB/CIFS shares on the server, they are causing permission problems for all other clients. Update: I can no longer verify any answers because we abandoned the project, but feel free to post any help for future visitors. The details of this behavior seem to also be dependent on the version of OSX the client is running. For this question, let's assume a client running 10.8.2. When I mount the CIFS share on an OSX client and create a new directory on it, the directory will be created with drwxr-x-rx permissions. This is undesirable because it will not allow anyone but me to write to the directory. There are other users in my group which should have write permissions as well. This behavior happens even though the following settings are present in smb.conf on the server: [global] create mask= 0666 directory mask= 0777 [share] force directory mode= 0775 force create mode= 0660 I was under the impression that these settings should make sure that directories are at least created with rwxrwxr-x permissions. But, I guess, that doesn't stop the client from changing the permissions after creating the directory. When I create a folder on the same share from a Windows client, the new folder will have the desired access permissions (rwxrwxrwx), so I'm currently assuming that the problem lies with the OSX client. I guess this wouldn't be such an issue if you could easily change the permissions of the directories you've created, but you can't. When opening the directory info in Finder, I get the old "You have custom access" notice with no ability to make any changes. I'm assuming that this is caused because we're using Windows ACLs on the share, but that's just a wild guess. Changing the write permissions for the group through the terminal works fine, but this is unpractical for the deployment and unreasonable to expect from anyone to do. This is the complete smb.conf: [global] encrypt passwords = yes dns proxy = no strict locking = no read raw = yes write raw = yes oplocks = yes max xmit = 65535 deadtime = 15 display charset = LOCALE max log size = 10 syslog only = yes syslog = 1 load printers = no printing = bsd printcap name = /dev/null disable spoolss = yes smb passwd file = /var/etc/private/smbpasswd private dir = /var/etc/private getwd cache = yes guest account = nobody map to guest = Bad Password obey pam restrictions = Yes # NOTE: read smb.conf. directory name cache size = 0 max protocol = SMB2 netbios name = freenas workgroup = COMPANY server string = FreeNAS Server store dos attributes = yes hostname lookups = yes security = user passdb backend = ldapsam:ldap://ldap.company.local ldap admin dn = cn=admin,dc=company,dc=local ldap suffix = dc=company,dc=local ldap user suffix = ou=Users ldap group suffix = ou=Groups ldap machine suffix = ou=Computers ldap ssl = off ldap replication sleep = 1000 ldap passwd sync = yes #ldap debug level = 1 #ldap debug threshold = 1 ldapsam:trusted = yes idmap uid = 10000-39999 idmap gid = 10000-39999 create mask = 0666 directory mask = 0777 client ntlmv2 auth = yes dos charset = CP437 unix charset = UTF-8 log level = 1 [share] path = /mnt/zfs0 printable = no veto files = /.snap/.windows/.zfs/ writeable = yes browseable = yes inherit owner = no inherit permissions = no vfs objects = zfsacl guest ok = no inherit acls = Yes map archive = No map readonly = no nfs4:mode = special nfs4:acedup = merge nfs4:chown = yes hide dot files force directory mode = 0775 force create mode = 0660

  Read the article

• ffmpeg volume parameter format

  - by tanon

  ffmpeg's -vol parameter is confusing me. 256 => normal (i guess meaning same as input volume, no change) 512 => (double the volume - read this somewhere). So what to do for 3 times the volume? 1.5 times the volume? Basically, lets say I have the max sound amplitudes (audacity levels) in 3 files as: 0.8 0.6 0.9 I want to amplify in the first two files, so that max=0.9 in all files. What parameters of -vol I would use?

  Read the article

• Multiple columns in a single index versus multiple indexes

  - by Tim Coker

  The short version of my question is what's the difference between three indexes each indexing a single column and one index indexing three columns. Background follows. I'm primarily a programmer but have to do DBA work because we don't have a DBA. I'm evaluating our indexes versus the queries run against a particular table. The table as 3 columns that I'm often filtering against or getting the max value of. Most of the time the queries look like select max(col_a) from table where col_b = 'avalue' or select col_c from table where col_b = 'avalue' and col_a = 'anothervalue' All columns are independently indexed. My question is would I see any difference if I had an index that indexed col_b and col_a together since they can appear in a where clause together?

  Read the article

• Nginx, proxy passing to Apache, and SSL

  - by Vic

  I have Nginx and Apache set up with Nginx proxy-passing everything to Apache except static resources. I have a server set up for port 80 like so: server { listen 80; server_name *.example1.com *.example2.com; [...] location ~* \.(?:ico|css|js|gif|jpe?g|png|pdf|te?xt)$ { access_log off; expires max; add_header Pragma public; add_header Cache-Control "public, must-revalidate, proxy-revalidate"; add_header Vary: Accept-Encoding; } location / { proxy_pass http://127.0.0.1:8080; include /etc/nginx/conf.d/proxy.conf; } } And since we have multiple ssl sites (with different ssl certificates) I have a server{} block for each of them like so: server { listen 443 ssl; server_name *.example1.com; [...] location ~* \.(?:ico|css|js|gif|jpe?g|png|pdf|te?xt)$ { access_log off; expires max; add_header Pragma public; add_header Cache-Control "public, must-revalidate, proxy-revalidate"; add_header Vary: Accept-Encoding; } location / { proxy_pass https://127.0.0.1:8443; include /etc/nginx/conf.d/proxy.conf; proxy_set_header X-Forwarded-Port 443; proxy_set_header X-Forwarded-Proto https; } } server { listen 443 ssl; server_name *.example2.com; [...] location ~* \.(?:ico|css|js|gif|jpe?g|png|pdf|te?xt)$ { access_log off; expires max; add_header Pragma public; add_header Cache-Control "public, must-revalidate, proxy-revalidate"; add_header Vary: Accept-Encoding; } location / { proxy_pass https://127.0.0.1:8445; include /etc/nginx/conf.d/proxy.conf; proxy_set_header X-Forwarded-Port 443; proxy_set_header X-Forwarded-Proto https; } } First of all, I think there is a very obvious problem here, which is that I'm double-encrypting everything, first at the nginx level and then again by Apache. To make everything worse, I just started using Amazon's Elastic Load Balancer, so I added the certificate to the ELB and now SSL encryption is happening three times. That's gotta be horrible for performance. What is the sane way to handle this? Should I be forwarding https on the ELB - http on nginx - http on apache? Secondly, there is so much duplication above. Is the best method to not repeat myself to put all of the static asset handling in an include file and just include it in the server?

  Read the article

• I'm looking for a reliable way to verify T-SQL stored procedures. Anybody got one?

  - by Cory Larson

  Hi all-- We're upgrading from SQL Server 2005 to 2008. Almost every database in the 2005 instance is set to 2000 compatibility mode, but we're jumping to 2008. Our testing is complete, but what we've learned is that we need to get faster at it. I've discovered some stored procedures that either SELECT data from missing tables or try to ORDER BY columns that don't exist. Wrapping the SQL to create the procedures in SET PARSEONLY ON and trapping errors in a try/catch only catches the invalid columns in the ORDER BYs. It does not find the error with the procedure selecting data from the missing table. SSMS 2008's intellisense, however, DOES find the issue, but I can still go ahead and successfully run the ALTER script for the procedure without it complaining. So, why can I even get away with creating a procedure that fails when it runs? Are there any tools out there that can do better than what I've tried? The first tool I found wasn't very useful: DbValidator from CodeProject, but it finds fewer problems than this script I found on SqlServerCentral, which found the invalid column references. ------------------------------------------------------------------------- -- Check Syntax of Database Objects -- Copyrighted work. Free to use as a tool to check your own code or in -- any software not sold. All other uses require written permission. ------------------------------------------------------------------------- -- Turn on ParseOnly so that we don't actually execute anything. SET PARSEONLY ON GO -- Create a table to iterate through declare @ObjectList table (ID_NUM int NOT NULL IDENTITY (1, 1), OBJ_NAME varchar(255), OBJ_TYPE char(2)) -- Get a list of most of the scriptable objects in the DB. insert into @ObjectList (OBJ_NAME, OBJ_TYPE) SELECT name, type FROM sysobjects WHERE type in ('P', 'FN', 'IF', 'TF', 'TR', 'V') order by type, name -- Var to hold the SQL that we will be syntax checking declare @SQLToCheckSyntaxFor varchar(max) -- Var to hold the name of the object we are currently checking declare @ObjectName varchar(255) -- Var to hold the type of the object we are currently checking declare @ObjectType char(2) -- Var to indicate our current location in iterating through the list of objects declare @IDNum int -- Var to indicate the max number of objects we need to iterate through declare @MaxIDNum int -- Set the inital value and max value select @IDNum = Min(ID_NUM), @MaxIDNum = Max(ID_NUM) from @ObjectList -- Begin iteration while @IDNum <= @MaxIDNum begin -- Load per iteration values here select @ObjectName = OBJ_NAME, @ObjectType = OBJ_TYPE from @ObjectList where ID_NUM = @IDNum -- Get the text of the db Object (ie create script for the sproc) SELECT @SQLToCheckSyntaxFor = OBJECT_DEFINITION(OBJECT_ID(@ObjectName, @ObjectType)) begin try -- Run the create script (remember that PARSEONLY has been turned on) EXECUTE(@SQLToCheckSyntaxFor) end try begin catch -- See if the object name is the same in the script and the catalog (kind of a special error) if (ERROR_PROCEDURE() <> @ObjectName) begin print 'Error in ' + @ObjectName print ' The Name in the script is ' + ERROR_PROCEDURE()+ '. (They don''t match)' end -- If the error is just that this already exists then we don't want to report that. else if (ERROR_MESSAGE() <> 'There is already an object named ''' + ERROR_PROCEDURE() + ''' in the database.') begin -- Report the error that we got. print 'Error in ' + ERROR_PROCEDURE() print ' ERROR TEXT: ' + ERROR_MESSAGE() end end catch -- Setup to iterate to the next item in the table select @IDNum = case when Min(ID_NUM) is NULL then @IDNum + 1 else Min(ID_NUM) end from @ObjectList where ID_NUM > @IDNum end -- Turn the ParseOnly back off. SET PARSEONLY OFF GO Any suggestions?

  Read the article

• APC PHP cache size does not exceed 32MB, even though settings allow for more

  - by hardy101

  I am setting up APC (v 3.1.9) on a high-traffic WordPress installation on CentOS 6.0 64 bit. I have figured out many of the quirks with APC, but something is still not quite right. No matter what settings I change, APC never actually caches more than 32MB. I'm trying to bump it up to 256 MB. 32MB is a default amount for apc.shm_size, so I am wondering if it's stuck there somehow. I have run the following echo '2147483648' > /proc/sys/kernel/shmmax to increase my system's shared memory to 2G (half of my 4G box). Then ran ipcs -lm which returns ------ Shared Memory Limits -------- max number of segments = 4096 max seg size (kbytes) = 2097152 max total shared memory (kbytes) = 8388608 min seg size (bytes) = 1 Also made a change in /etc/sysctl.conf then ran sysctl -p to make the settings stick on the server. Rebooted, too, for good measure. In my APC settings, I have mmap enabled (which happens by default in recent versions of APC). php.ini looks like: apc.stat=0 apc.shm_size="256M" apc.max_file_size="10M" apc.mmap_file_mask="/tmp/apc.XXXXXX" apc.ttl="7200" I am aware that mmap mode will ignore references to apc.shm_segments, so I have left it out with default 1. phpinfo() indicates the following about APC: Version 3.1.9 APC Debugging Disabled MMAP Support Enabled MMAP File Mask /tmp/apc.bPS7rB Locking type pthread mutex Locks Serialization Support php Revision $Revision: 308812 $ Build Date Oct 11 2011 22:55:02 Directive Local Value apc.cache_by_default On apc.canonicalize O apc.coredump_unmap Off apc.enable_cli Off apc.enabled On On apc.file_md5 Off apc.file_update_protection 2 apc.filters no value apc.gc_ttl 3600 apc.include_once_override Off apc.lazy_classes Off apc.lazy_functions Off apc.max_file_size 10M apc.mmap_file_mask /tmp/apc.bPS7rB apc.num_files_hint 1000 apc.preload_path no value apc.report_autofilter Off apc.rfc1867 Off apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.serializer default apc.shm_segments 1 apc.shm_size 256M apc.slam_defense On apc.stat Off apc.stat_ctime Off apc.ttl 7200 apc.use_request_time On apc.user_entries_hint 4096 apc.user_ttl 0 apc.write_lock On apc.php reveals the following graph, no matter how long the server runs (cache size fluctuates and hovers at just under 32MB. See image http://i.stack.imgur.com/2bwMa.png You can see that the cache is trying to allocate 256MB, but the brown piece of the pie keeps getting recycled at 32MB. This is confirmed as refreshing the apc.php page shows cached file counts that move up and down (implying that the cache is not holding onto all of its files). Does anyone have an idea of how to get APC to use more than 32 MB for its cache size?? **Note that the identical behavior occurs for eaccelerator, xcache, and APC. I read here: http://www.litespeedtech.com/support/forum/archive/index.php/t-5072.html that suEXEC could cause this problem.

  Read the article

• Which kind of memory do I need for this laptop?

  - by Joshua

  I'm trying to upgrade the RAM in my laptop. It has two slots, but only 1 is filled with a 4gb stick, so I am looking for another 4gb to stick in the other slot. It is a HP g6-1d38dx. I found this RAM, 9-9-9-24, but it is 1333mhz. Looks like it says my max bandwith on the stock stick is 800MhZ. Would that still be cool to use since it is more than the max? http://www.newegg.com/Product/Product.aspx?Item=N82E16820576005 Also will mixing and matching brands have much of an effect? Can someone link a proper module for my machine?

  Read the article

• How do I make subsonic (media server) work with SSL?

  - by John Baber

  The roughly out-of-the-box setup as a regular user works fine (meaning the site appears at http://myserver.com:4040). From ps aux java -Xmx100m -Dsubsonic.home=/var/subsonic -Dsubsonic.host=0.0.0.0 -Dsubsonic.port=4040 -Dsubsonic.httpsPort=0 -Dsubsonic.contextPath=/ -Dsubsonic.defaultMusicFolder=/var/music -Dsubsonic.defaultPodcastFolder=/var/music/Podcast -Dsubsonic.defaultPlaylistFolder=/var/playlists -Djava.awt.headless=true -verbose:gc -jar subsonic-booter-jar-with-dependencies.jar but just giving an https port java -Xmx100m -Dsubsonic.home=/var/subsonic -Dsubsonic.host=0.0.0.0 -Dsubsonic.port=4040 -Dsubsonic.httpsPort=6060 -Dsubsonic.contextPath=/ -Dsubsonic.defaultMusicFolder=/var/music -Dsubsonic.defaultPodcastFolder=/var/music/Podcast -Dsubsonic.defaultPlaylistFolder=/var/playlists -Djava.awt.headless=true -verbose:gc -jar subsonic-booter-jar-with-dependencies.jar makes http://myserver.com:4040 say HTTP ERROR: 404 NOT_FOUND RequestURI=/index.view Powered by jetty:// and https://myserver.com:6060 say Unable to connect I'm only making the change by doing # SUBSONIC_ARGS="--port=80 --https-port=443 --max-memory=120" SUBSONIC_ARGS="--max-memory=100 --https-port=6060" in /etc/default/subsonic and issuing a sudo service subsonic restart (this is Ubuntu Oneiric)

  Read the article

• High Load average threshold in linux

  - by user2481010

  My one of friend said that his server load average sometime goes above 500-1000, for me it is strange value because I never saw load average more than 10. I asked him give me some snapshot of top and memory usages, he gave following details: TOP USAGES top - 06:06:03 up 117 days, 23:02, 2 users, load average: 147.37, 44.57, 15.95 Tasks: 116 total, 2 running, 113 sleeping, 0 stopped, 1 zombie Cpu(s): 16.6%us, 6.9%sy, 0.0%ni, 9.2%id, 66.5%wa, 0.0%hi, 0.8%si, 0.0%st Mem: 8161648k total, 7779528k used, 382120k free, 3296k buffers Swap: 5242872k total, 1293072k used, 3949800k free, 168660k cached Free $ free -gt total used free shared buffers cached Mem: 7 6 1 0 0 4 -/+ buffers/cache: 1 5 Swap: 4 0 4 Total: 12 6 6 Total cpu $ nproc 8 my question is it possible load average more than 100 on 8 core,12 GB mem Server? because I read many tutorial,article on load average, it said that thumb rule is "number of cores = max load" according to thumb rule here is max load average 16 then how his server running with 147.37 load server? he said that it is least value (147.37) some time goes more than 500.

  Read the article

• EXEC() syntax error using ODBC

  - by Mike Trader

  I have written a little ETL application that I wish to run a few lines of TSQL from. If i enter a simple query like "SELECT * FROM MyTable" everything is fine. All single line commands run as expected. A multiline query like this is also fine: DECLARE @TableName NVARCHAR(MAX) set @TableName = 'MyTable' EXECute ( 'DROP TABLE '+ @TableName ) Howevery when I try and run: DECLARE @TableName NVARCHAR(MAX) OPEN Tables FETCH NEXT FROM Tables INTO @TableName WHILE @@FETCH_STATUS = 0 BEGIN EXEC( 'DROP TABLE ' + @TableName ) FETCH NEXT FROM Tables INTO @TableName END I get a syntax error after TABLE in the EXEC() call. I have spent 6 hours trying to figure this out thinking perhaps I need to escape the single quote or something. I just cannot see the problem. A set of fresh eyes would be appreciated.

  Read the article

• Program is not displaying output correctly

  - by Dave Lee

  My program is suppose to display information from a text file. The text file is here http://pastebin.com/qB6nX2x4 I cant find the problem in my program. I think it has to deal with the looping but im not sure. My program runs correctly but only displays the first line of text. Any help would be appreciated. #include <iostream> #include <string> #include <cstdlib> #include <fstream> using namespace std; int buildArrays(int A[],int B[],int C[]) { int i=0,num; ifstream inFile; inFile.open("candycrush.txt"); if(inFile.fail()) { cout<<"The candycrush.txt input file did not open"<<endl; exit(-1); } while(inFile) { inFile>>num; A[i]=num; inFile>>num; B[i]=num; inFile>>num; C[i]=num; i++; } inFile.close(); return i; } void printArrays( string reportTitle, int levelsArray[], int scoresArray[], int starsArray[], int numberOfLevels ) { cout<<endl; cout<<reportTitle<<endl; cout<<"Levels\tScores\tStars"<<endl; cout<<"---------------------"<<endl; for(int i=0;i<numberOfLevels;i++) { cout<<levelsArray[i]<<"\t"<<scoresArray[i]<<"\t"; for(int j=0;j<starsArray[j];j++) { cout<<"*"; } cout<<endl; } } void sortArrays( int levelsArray[], int scoresArray[], int starsArray[], int numberOfLevels ) { for(int i=0;i<numberOfLevels;i++) { for(int j=0;j<numberOfLevels;j++) { if(levelsArray[i]<levelsArray[j]) { int temp1=levelsArray[i]; int temp2=scoresArray[i]; int temp3=starsArray[i]; levelsArray[i]=levelsArray[j]; scoresArray[i]=scoresArray[j]; starsArray[i]=starsArray[j]; levelsArray[j]=temp1; scoresArray[j]=temp2; starsArray[j]=temp3; } } } } int main() { const int MAX=400; int levelsArray[MAX]; int scoresArray[MAX]; int starsArray[MAX]; int numberOfLevels=buildArrays(levelsArray,scoresArray,starsArray); printArrays( "Candy Crush UNSORTED Report", levelsArray, scoresArray, starsArray, numberOfLevels ); sortArrays( levelsArray, scoresArray, starsArray, numberOfLevels); printArrays( "Candy Crush SORTED Report", levelsArray, scoresArray, starsArray, numberOfLevels ); system("pause"); }

  Read the article

• htaccess filesMatch exclusion

  - by Hikari

  I have the following directive in my htaccess <filesMatch "\.(gif|jpe?g|png|js|css|swf|php|ico|txt|pdf|xml|html?)$"> FileETag None <ifModule mod_headers.c> Header unset ETag Header set Cache-Control "max-age=0, no-cache, no-store, must-revalidate" Header set Pragma "no-cache" Header set Expires "Wed, 11 Jan 1984 05:00:00 GMT" </ifModule> </filesMatch> I copied that regex from someplace in Web months ago. It should add those headers to any HTTP Response that does NOT have those extensions. But it's not working, it's adding them to any Response. I also need to create another directive to add Header set Cache-Control "max-age=3600, public" to Responses of files that DOES have them. Could anybody help me make proper fileMatch regexes?

  Read the article

• If I double my ram on a x86 processor, does that double the ram I can use for each individual process?

  - by Derek Reitz

  I don't understand how 32-Bit OS's use RAM on a per process basis. I've read the max RAM my x86 processor running a 32-bit OS can use is 2^32 = 4gb; but that's just for one process, right? 3DS Max keeps crashing, but it typically can never use more than 2GB of RAM before it crashes, if I increase my RAM from 4-8GB, would that double how much RAM I can use for each individual process or actually cause no change in my performance? Also would increasing my VRAM and getting a better graphics card increase the extent to which individual programs can preform? Lastly, is there any way to upgrade a 86-bit processor to be able to run a 64-bit OS? I feel like it would be ridiculous to sell modern processors that are capped at 4GB of RAM? Thanks. Quad-Core Intel i7 Q 720 @ 1.6GHz

  Read the article

• Summing up spreadsheet data when a column contains “#N/A”

  - by Doris

  I am using Goggle Spreadsheet to work up some historical stock data and I use a Google function (=googlefinance=…) to import the historical closing prices for a stock, then I work with that data further. But, in that list of data generated from the =googlefinance=… function, one of the amounts comes up as #N/A. I don’t know why, but it happens for various symbols that I have tried. When I use a max function on the array, which includes the N/A line, the max function does not come up with anything but an N/A, so the N/A throws off any further functions. I thought I’d create a second column to the right of the imported data in which I can give it an IF function, something like, If ((A1 <0), "0", A1), with the expectation that it would return 0 if cell A1 is the N/A, and the cell value if it is not N/A. However, this still returns N/A. I also tried an IS BLANK function but that resulted in the same NA. Does anyone have any suggestions for a workaround to eliminate the N/A from an array of numbers that I am trying to work with?

  Read the article

• HDMI resolution limited to 1920 x 1080?

  - by Jay Bazuzi

  Monitor is a Dell 3008wfp. Very nice. Max resolution 2560 x 1600. Video card is an ATI Radeon HD 4350. I like it because it was cheap and is fanless. (Noise bugs me.) I would like to switch from DVI to HDMI, but when I use HDMI, the resolution drops to 1920 x 1080. Do I need to change out my video card to get the full resolution? How can I pick one that will do the max resolution?

  Read the article

• How to make sure clients update their browser cache when my website is updated?

  - by user64204

  I am using the HTTP 1.1 Cache-Control header to implement client-side caching. Since I update my website only once a month I would like the CSS and JS files to be cached for 30 days with Cache-Control: max-age=2592000. The problem is that the 30-day period defined by Cache-Control doesn't coincide with the website update cycle, it starts from the moment the users visit the site and ends 30 days later, which means an update could occur in the meantime and users would be running with outdated content for a while, which could break the rendering of the website if for instance the HTML and CSS no longer match. How can I perform client-side caching of content for periods of several days but somehow get users to refresh their CSS/JS files after the website has been updated? One solution I could think of is that if website updates can be schedule, the max-age returned by the server could be decreased every day accordingly so that no matter when people visit the website, the end of caching period would coincide with the update of the website, but changing the server configuration every day goes against one of my sysadmin principles (once it's running, don't touch it).

  Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >