Search Results

Search found 93619 results on 3745 pages for 'one liner'.

Page 64/3745 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

• Only One GPU Detected in the Nvidia Quadro NVS 450

  - by Kyle Brandt

  I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

  Read the article

• Multiple Ruby versions on one webserver?

  - by Legion

  The Ideal Using rvm, it would be awesome to be able to have multiple Rubies on one webserver, and through some sort of server configuration, be able to assign Ruby versions to different Rails/Sinatra/etc apps on a per-project basis. I am aware, from rvm's documentation, that Passenger only works with one Ruby at a time. :( The Compromise Failing that, it would be nice to at least be able to concoct a way to be able to assign projects to a Ruby 1.8 or a Ruby 1.9 interpreter. I've read that using Nginx as a reverse proxy allows running Apache and Nginx on the same box. Would it then be possible to have Apache+Passenger using one Ruby, and Nginx+Passenger using a different one? Maybe use something other than Passenger with Nginx? Am I Barking Up the Wrong Tree? Am I missing a good solution to this issue? Am I walking into a nightmare configuration situation? Is what I want even viable, or is it necessary to run another box to run a separate Ruby version?

  Read the article

• WPF : Multiple views, one DataContext

  - by zapho

  Hi, I'm working on a WPF application which must handle multiple screens (two at this this time). One view can be opened on several screens and user actions must be reflected consistently on all screens. To achieve this, for a given type of view, a single DataContext is instantiated. Then, when a view is displayed on a screen, the unique DataContext is attached to it. So, one DataContext, several views (same type of view/xaml). So far so good. It works quite well in most cases. I do have a problem with a specific view which relies on ItemsControl. These ItemsControl are used to display UIElements dynamically build in the ViewModel/DataContext (C# code). These UIElements are mostly Path objects. Example : <ItemsControl ItemsSource="{Binding WindVectors}"> <ItemsControl.Template> <ControlTemplate TargetType="{x:Type ItemsControl}"> <Canvas IsItemsHost="True" /> </ControlTemplate> </ItemsControl.Template> </ItemsControl> Here, WindVectors is a ObservableCollection<UIElement>. When the view is opened the first time, everything is fine. The problem is that when the view is opened one another screen, all ItemsControl are removed from the first screen and displayed one the second screen. Other WPF components (TextBlock for instance) on this view react normally and are displayed on both screens. Any help would be greatly appreciated. Thanks. Fabrice

  Read the article

• Copy SQL Server data from one server to another on a schedule

  - by rwmnau

  I have a pair of SQL Servers at different webhosts, and I'm looking for a way to periodically update the one server using the other. Here's what I'm looking for: As automated as possible - ideally, without any involvement on my part once it's set up. Pushes a number of databases, in their entirely (including any schema changes) from one server to the other Freely allows changes on the source server without breaking my process. For this reason, I don't want to use replication, as I'd have to break it every time there's an update on the source, and then recreate the publication and subscription One database is about 4GB in size and contains binary data. I'm not sure if there's a way to export this to a script, but it would be a mammoth file if I did. Originally, I was thinking of writing something that takes a scheduled full backup of each database, FTPs the backups from one server to the other once they're done, and then the new server picks it up and restores it. The only downside I can see to this is that there's no way to know that the backups are done before starting to transfer them - can these backups be done synchronously? Also, the server being refreshes is our test server, so if there's some downtime involved in moving the data, that's fine. Does anybody out there have a better idea, or is what I'm currently considering the best non-replication way to go? Thanks for your help, everybody. UPDATE: I ended up designing a custom solution to get this done using BAT files, 7Zip,command line FTP, and OSQL, so it runs in a completely automatic way and aggregates the data from a dozen servers across the country. I've detailed the steps in a blog entry. Thanks for all your input!

  Read the article

• Authentification-None for one folder(page) when the project is under FormsAuthentifications

  - by Sirius Lampochkin

  I have a WebApplication on asp.net 2.0 with namespace Admin. I have Form Authentification mode for the project. <authentication mode="Forms"> <forms name="ASP_XML_Form" loginUrl="Login.aspx" protection="All" timeout="30" path="/" requireSSL="false" slidingExpiration="true" cookieless="AutoDetect"> </forms> </authentication> Now, I try to share one folder (one inside page) for not Authentificatied users: <location path="Recovery"> <system.web> <roleManager enabled="false" > </roleManager> <authentication mode="None"> </authentication> <authorization> <allow users="*" /> </authorization> <httpHandlers> <remove verb="GET" path="image.aspx" /> <remove verb="GET" path="css.aspx" /> </httpHandlers> </system.web> </location> But when I create the page inside the shared folder, it can't get access to the assembly. And I see the error like this: Could not load file or assembly 'Admin' or one of its dependencies. The system cannot find the file specified. It also shows me the error: ASP.NET runtime error: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS. Does anybody know how to share (Authentification None) one folder(page) when the project is under FormsAuthentifications?

  Read the article

• How can I remove HTML span tags with a Perl one liner?

  - by yaya3

  I want to perform the following vim substitution as a one-liner in the terminal with Perl. I would prefer to allow for any occurences of whitespace or newlines, rather than explicitly catering for them as I am below. %s/blockDontForget">\n*\s*<p><span><a\(.*\)<\/span>/blockDontForget"><p><a\1/g I've tried this: perl -pi -e 's/blockDontForget"><p><span><a(.*)<\/span>/blockDontForget"><p><a$1/msg' I presume I am misinterpreting the flags. Where am I going wrong? Thanks. EDIT: The above example is to strip the spans out of the following html: <div class="block blockDontForget"> <p><span><a href="../../../foo/bar/x/x.html">Lorem Ipsum</a></span></p> EDIT: It's just the <span>'s and </span>'s that are inbetween <p> and <a> from the "blockDontForget" class </div> that I want to remove (there are lots or these blockDontForget divs with spans inside anchors that I want to keep).

  Read the article

• jquery - problem with executing annimation of two separate objects, one after another

  - by MoreThanChaos

  Hello I have problem to put together animations of two separate objects to second one start when first one ends. I tried to use callback but it seems that i make some syntax misteakes which crash jQuery or cause some unexpected behaviour. It seems that i'm stuck so I'd like to ask You for best way to put these animations together to act the way I want. in mouseenter 1st .pp grows, 2nd .tt fade in in mouseleave 1st .tt fade out, 2nd .pp shrink It's alsp relevant that animations doesn't pile up, i mean here animation called by one event doesnt wait until other animation in progress will end. In generall exactly what is below but yo be animated one after another, not simultanously. $('.pp').bind({ mouseenter: function() { $(this).animate({ width: $(this).children(".tt").outerWidth(), height: $(this).children(".tt").outerHeight() },{duration:1000,queue:false} ); $(this).children(".tt").animate({ opacity: 1.0 }, {duration:1000,queue:false}); }, mouseleave: function() { $(this).children(".tt").animate({ opacity: 0 }, {duration:1000,queue:false}); $(this).animate({ width: 17, height: 17 }, {duration:1000,queue:false}); } });

  Read the article

• [Database] How to model this one-to-one relation?

  - by pbean

  I have several entities which respresent different types of users who need to be able to log in to a particular system. Additionally, they have different types of information associated with them. For example: a "general user", which has an e-mail address and "admin user", which has a workstation number (note that this a hypothetical case). Both entities also share common properties like first name, surname, address and telephone number. Finally, they naturally need to have a (unique) user name and a password to log in. In the application, the user just has to fill in his user name and password, and the functionality of the application changes slightly according to the type of the user. You can imagine that the username needs to be unique for this work. How should I model this effectively? I can't just create two tables, because then I can't force a unique constaint on the user name. I also can't put them all in just one table, because they have different types of specific information associated to them. I think I might need 3 seperate tables, one for "users" (with user name and password), one for the "general users" and another one for the "admin users", but how would the relations between these work? Or is there another solution? (By the way, the target DBMS is MySQL, so I don't think generalization is supported in the database system itself).

  Read the article

• ColdFusion Session issue - multiple users behind one proxy IP -- cftoken and cfid seems to be shared

  - by smoothoperator

  Hi Everyone, I have an application that uses coldfusion's session management (instead of the J2EE) session management. We have one client, who has recently switched their company's traffic to us to come viaa proxy server in their network. So, to our Coldfusion server, it appears that all traffic is coming from this one IP Address, for all of the accounts of this one company.. Of the session variables, Part 1 is kept in a cflock, and Part 2 is kept in editable session variables. I may be misundestanding, but we have done it this way as we modify some values as needed throughout the application's usage. We are now running into an issue of this client having their session variables mixed up (?). We have one case where we set a timestamp.. and when it comes time to look it up, it's empty. From the looks of it this is happening because of another user on the same token. My initial thoughts are to look into modifying our existing session management to somehow generate a unique cftoken/cfid, or to start using jsession_ID, if this solves the problem at all. I have done some basic research on this issue and couldn't find anything similar, so I thought I'd ask here. Thanks!

  Read the article

• In an Android application, should I have one content provider per table or only one for the entire a

  - by Andrew Dyer

  I have years of experience with Microsoft .NET development (primarily C#) and have been working to come up to speed on Android and Java. So far, I've built a small application with a couple screens and a working content provider. All of the examples I've seen for developing content providers typically work with a single table, so I got the impression that this was the convention. I built a couple more content providers for other tables and ran into the "Unknown URI" IllegalArgumentException when I tried to test them. The exception is being thrown by one of my content providers, but not the one I was intending to call. It appears that my application is using the first content provider in the AndroidManifest.xml file, which now has me wondering if I should only have a single content provider for the entire application. Are there any best practices and/or examples for working with multiple tables in an Android application? Should I have one content provider per table or only one for the entire application? If the former, how do I resolve URIs to the proper provider? If the latter, how do I keep my content provider code from being polluted with switch statements?

  Read the article

• Dictionaries with more than one key per value in Python

  - by nickname

  I am attempting to create a nice interface to access a data set where each value has several possible keys. For example, suppose that I have both a number and a name for each value in the data set. I want to be able to access each value using either the number OR the name. I have considered several possible implementations: Using two separate dictionaries, one for the data values organized by number, and one for the data values organized by name. Simply assigning two keys to the same value in a dictionary. Creating dictionaries mapping each name to the corresponding number, and vice versa Attempting to create a hash function that maps each name to a number, etc. (related to the above) Creating an object to encapsulate all three pieces of data, then using one key to map dictionary keys to the objects and simply searching the dictionary to map the other key to the object. None of these seem ideal. The first seems ugly and unmaintainable. The second also seems fragile. The third/fourth seem plausible, but seem to require either much manual specification or an overly complex implementation. Finally, the fifth loses constant-time performance for one of the lookups. In C/C++, I believe that I would use pointers to reference the same piece of data from different keys. I know that the problem is rather similar to a database lookup problem by a non-key column, however, I would like (if possible), to maintain the approximate O(1) performance of Python dictionaries. What is the most Pythonic way to achieve this data structure?

  Read the article

• Populate JOIN into a list in one database query

  - by axio

  I am trying to get the records from the 'many' table of a one-to-many relationship and add them as a list to the relevant record from the 'one' table. I am also trying to do this in a single database request. Code derived from http://stackoverflow.com/questions/1580199/linq-to-sql-populate-join-result-into-a-list almost achieves the intended result, but makes one database request per entry in the 'one' table which is unacceptable. That failing code is here: var res = from variable in _dc.GetTable<VARIABLE>() select new { x = variable, y = variable.VARIABLE_VALUEs }; However if I do a similar query but loop through all the results, then only a single database request is made. This code achieves all goals: var res = from variable in _dc.GetTable<VARIABLE>() select variable; List<GDO.Variable> output = new List<GDO.Variable>(); foreach (var v2 in res) { List<GDO.VariableValue> values = new List<GDO.VariableValue>(); foreach (var vv in v2.VARIABLE_VALUEs) { values.Add(VariableValue.EntityToGDO(vv)); } output.Add(EntityToGDO(v2)); output[output.Count - 1].VariableValues = values; } However the latter code is ugly as hell, and it really feels like something that should be do-able in a single linq query. So, how can this be done in a single linq query that makes only a single database query? In both cases the table is set to preload using the following code: _dc = _db.CreateLinqDataContext(); var loadOptions = new DataLoadOptions(); loadOptions.LoadWith<VARIABLE>(v => v.VARIABLE_VALUEs); _dc.LoadOptions = loadOptions; I am using .NET 3.5, and the database back-end was generated using SqlMetal.

  Read the article

• JDO architecture: One to many relationship and cascading deleting

  - by user361897

  I’m new to object oriented database designs and I’m trying to understand how I should be structuring my classes in JDO for google app engine, particularly one to many relationships. Let’s say I’m building a structure for a department store where there are many departments, and each department has many products. So I’d want to have a class called Department, with a variable that is a list of a Product class. @PersistenceCapable public class Department { @PrimaryKey @Persistent(valueStrategy = IdGeneratorStrategy.IDENTITY) private String deptID; @Persistent private String departmentName; @Persistent private List<Product>; } @PersistenceCapable public class Product { @PrimaryKey @Persistent(valueStrategy = IdGeneratorStrategy.IDENTITY) private String productID; @Persistent private String productName; } But one Product can be in more than one Department (like a battery could be in electronics and household supplies). So the next question is, how do I not duplicate data in the OOD world and have only one copy of product data in numerous departments? And the next question is, let’s say I delete out a particular product, how do each of the departments know it was deleted?

  Read the article

• Git + SoA, one repo or many?

  - by parsenome

  Normally, when I start up a new application, I'd create a new git repository for it. That's well accepted and plays nice with Github when I want to share my code. At work, I'm working in a service oriented architecture. One very common pattern is to add some code to two different applications at the same time - perhaps adding a model with a RESTful interface to one and a web frontend for managing it on another. Using separate git repositories has some warts in this case. Here are what I see as the downsides of doing separate repositories: I have to commit twice I can't correllate related commits very well No single place to go back and trace history - I'd love to be able to bring up all my commits for the day in a single place Forgetting to pull one repo or another is a gotcha On the other hand, I've used perforce a lot and its one giant repository model has lots of warts too. Perforce has features designed to let help you with those, git doesn't. Has anyone else run into this situation? How did you handle it? What worked well, and what didn't?

  Read the article

• Multiple collections tied to one base collection with filters and eventing

  - by damienc88

  I have a complex model served from my back end, which has a bunch of regular attributes, some nested models, and a couple of collections. My page has two tables, one for invalid items, and one for valid items. The items in question are from one of the nested collections. Let's call it baseModel.documentCollection, implementing DocumentsCollection. I don't want any filtration code in my Marionette.CompositeViews, so what I've done is the following (note, duplicated for the 'valid' case): var invalidDocsCollection = new DocumentsCollection( baseModel.documentCollection.filter(function(item) { return !item.isValidItem(); }) ); var invalidTableView = new BookIn.PendingBookInRequestItemsCollectionView({ collection: app.collections.invalidDocsCollection }); layout.invalidDocsRegion.show(invalidTableView); This is fine for actually populating two tables independently, from one base collection. But I'm not getting the whole event pipeline down to the base collection, obviously. This means when a document's validity is changed, there's no neat way of it shifting to the other collection, therefore the other view. What I'm after is a nice way of having a base collection that I can have filter collections sit on top of. Any suggestions?

  Read the article

• Which MAC address is the right one?

  - by Paul Dinh

  Result by 'getmac': C:\>getmac Physical Address Transport Name =================== ========================================================== 72-03-C6-48-59-34 \Device\Tcpip_{8AEB3263-18C4-449E-A80F-BC2541DDC2A9} 00-21-9B-D5-6F-EE \Device\Tcpip_{C2F9CE19-D68F-4105-9766-45CBE6D82331} 00-22-68-D2-9B-F7 \Device\Tcpip_{A2701130-9221-43FE-8F14-7B1114F84DC3} Result by 'ipconfig /all': C:\>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : xps-m1530 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Mixed IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Dell Wireless 1395 WLAN Mini-Card Physical Address. . . . . . . . . : 00-22-68-D2-9B-F7 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Autoconfiguration IP Address. . . : 169.254.246.4 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Marvell Yukon 88E8040 PCI-E Fast Eth ernet Controller Physical Address. . . . . . . . . : 00-21-9B-D5-6F-EE Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.112 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 8.8.8.8 8.8.4.4 Lease Obtained. . . . . . . . . . : 01 November 2012 9:00:36 AM Lease Expires . . . . . . . . . . : 04 November 2012 9:00:36 AM There is a MAC address on the back of my laptop, but the sticker is no longer there. So I use the 'getmac' command to get the MAC addresses. But which address shown by 'getmac' above is the one matching the MAC in the sticker on the back of my laptop? Or am I mistaken something? 00-21-... is the ethernet adapter, 00-22-... is the wireless adapter, and 72-03-... is what?

  Read the article

• CakePHP: 2-level JOIN with one Query

  - by Daniel Magliola

  I have the following models in CakePHP: A Deposit belongs to an Account An Account belongs to a Customer I want to have a list of Deposits, and I need to show the name of the customer (so I have to join through the Customer). I also need to paginate this list. If I set Deposit->recursive = 2, I can get the Customer, however, CakePHP runs one query joining Deposit and Account, and then runs one query per each Deposit, to get the Customer. How can I make it get both models with only one query? I tried this, but it didn't work: $this->paginate = array('joins' => array( array( 'table' => 'customers', 'alias' => 'AccountCustomer', 'type' => 'inner', 'foreignKey' => false, 'conditions' => array('Account.customer_id = AccountCustomer.id') ) )); Any ideas? Thanks! Daniel

  Read the article

• copy or move a file from one ftp server to another

  - by Oleg Pavliv

  I have a java application, which copies or moves a bunch of giga files from one ftp server to another. Currently it copies a file from the first fpt server to the local computer (where it runs) using ftp get and then copies it to the second ftp server using ftp put. I use net library from apache. Is it possible to copy it directly from one ftp server to another bypassing the local computer? One idea is to create a java telnet session and and send a couple of ftp commands. Will it work? Any other suggestions?

  Read the article

• Should strongly typed partial views on one page in asp.net mvc-2 have one combined view model?

  - by Kai

  Hi guys, I have a question about asp.net mvc-2 strongly typed partial views, and view models. I was just wondering if I can (or should) have two strongly typed partial views on one page, without implementing a whole new view model for that page. For example, I have a page that displays profiles, but also has an inline form to add a quick contact. Each of these entities already has it's own view model, i.e I have a ProfileViewModel and a ContactViewModel. So my view needs two strongly typed partial views, one using an IEnumerable List of ProfileViewModels, and one using a ContactViewModel. Is it possible or desirable to avoid making a third view model, an 'IndexViewModel' for this page, which holds a list of ProfileViewModels and a ContactViewModel? Is not implementing this view model bad practice, or tidier as it results in less view models? Thanks!

  Read the article

• One check constraint or multiple check constraints?

  - by RenderIn

  Any suggestions on whether fewer check constraints are better, or more? How should they be grouped if at all? Suppose I have 3 columns which are VARCHAR2(1 BYTE), each of which is a 'T'/'F' flag. I want to add a check constraint to each column specifying that only characters IN ('T', 'F') are allowed. Should I have 3 separate check constraints, one for each column: COL_1 IN ('T', 'F') COL_2 IN ('T', 'F') COL_3 IN ('T', 'F') Or a single check constraint: COL_1 IN ('T', 'F') AND COL_2 IN ('T', 'F') AND COL_3 IN ('T', 'F') My thoughts are it is best to keep these three separate, as the columns are logically unrelated to each other. The only case I would have a check constraint that examines more than one column is if there was some relationship between the value in one and the value in another, e.g.: (PARENT_CNT > 0 AND PRIMARY_PARENT IS NOT NULL) OR (PARENT_CNT = 0 AND PRIMARY_PARENT IS NULL)

  Read the article

• I need to calculate the date / time difference between one date time column

  - by Stringz

  Details. I have the notes table having the following columns. ID - INT(3) Date - DateTime Note - VARCHAR(100) Tile - Varchar(100) UserName - Varchar(100) Now this table will be having NOTES along with the Titles entered by UserName on the specified date / time. I need to calculate the DateTimeDifference between the TWO ROWS in the SAME COLUMN For example the above table has this peice of information in the table. 64, '2010-03-26 18:16:13', 'Action History', 'sending to Level 2.', 'Salman Khwaja' 65, '2010-03-26 18:19:48', 'Assigned By', 'This is note one for the assignment of RF.', 'Salman Khwaja' 66, '2010-03-27 19:19:48', 'Assigned By', 'This is note one for the assignment of CRF.', 'Salman Khwaja' Now I need to have the following resultset in query reports using MYSQL. TASK - TIME Taken ACTION History - 2010-03-26 18:16:13 Assigned By - 00:03:35 Assigned By - 25:00:00 More smarter approach would be TASK - TIME Taken ACTION History - 2010-03-26 18:16:13 Assigned By - 3 minutes 35 seconds Assigned By - 1 day, 1 hour. I would appreciate if one could give me the PLAIN QUERY along with PHP code to embed it too.

  Read the article

• Using one LINQ statement with different parameters

  - by Brettski

  I have a pretty complex linq statement I need to access for different methods. Each of these methods may need to see the resulting data with different parameters. For one method it may be a project code, for another it may be language. The statement is pretty much the same it's just the where part which changes. I have not been able to figure out how to use different where statements without duplicating the entire linq statement, and that just isn't dry enough for me. For example (greatly simplified): var r = from c in customer where c.name == "some name" // or it may be var r = from c in customer where c.customerId == 8 Is there a way to have both of these in the same statement so I can use one or the other based on what I am doing? I tried an if statement to use one of the where statements or the other, and that didn't go over very well.

  Read the article

• Using one sqlconnection/sqlcommand through 2 DB-bound methods

  - by dotnetdev

  I have a class with a method which gets data from a database through a SELECT stored proc. This method uses a SqlDbReader by returning ExecuteReader() on a SqlCommand. The connection and everything is made in this method, with fields (such as connection string) set as class level fields. I now need to populate an array based on the results of this query (so the columns of each row will go into the array with its own index). However, this query will not select all of the data from one table which is involved. I can write the queries to get what I need, but how can I use one connection throughout the class? If I instantiate the connection object and call Open() in the constructor, I get an exception @ runtime. I'm hoping for something like this: // At class level: sqlconn.Open(); // sqlcommand set up Method() { // Fire stored proc // Insert results in a collection } Method2() { // Pass same collection in (use same one), // Add new row columns into same collection } How can I do this with strict performance in mind? Thanks

  Read the article

• Define a regex, which matches one digit twice and all others once

  - by Amin

  As part of a larger regex I would like to match the following restrictions: The string has 11 digits All digits are numbers Within the first 10 digits one number [0-9] (and one only!) must be listed twice This means the following should match: 12345678914 12235879600 Whereas these should not: 12345678903 -> none of the numbers at digits 1 to 10 appears twice 14427823482 -> one number appears more than twice 72349121762 -> two numbers appear twice I have tried to use a lookahead, but all I'm managing is that the regex counts a certain digit, i.e.: (?!.*0\1{2}) That does not do what I need. Is my query even possible with regex?

  Read the article

• Referencing a x86 assembly in a 64bit one

  - by Jörg Battermann

  In one project we have a dependency on a legacy system and its .Net assembly which is delivered as a 'x86' and they do not provide a 'Any CPU' and/or 64bit one. Now the project itself juggles with lots of data and we hit the limitations we have with a forced x86 on the whole project due to that one assembly (if we used 64bit/any cpu it would raise a BadImageFormatException once that x86 is loaded on a 64bit machine). Now is there a (workaround)way to use a x86 assembly in a 64bit .net host app? That tiny dependency on that x86 assembly makes and keeps 99% of the project heavily limited.

  Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >