Search Results

Search found 1923 results on 77 pages for 'overview'.

Page 64/77 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

  • Help Prevent Carpal Tunnel Problems with Workrave

    - by Matthew Guay
    Whether for work or leisure, many of us spend entirely too much time on the computer everyday.  This puts us at risk of having or aggravating Carpal Tunnel problems, but thanks to Workrave you can help to divert these problems. Workrave helps Carpal Tunnel problems by reminding you to get away from your computer periodically.  Breaking up your computer time with movement can help alleviate many computer and office related health problems.  Workrave helps by reminding you to take short pauses after several minutes of computer use, and longer breaks after continued use.  You can also use it to keep from using the computer for too much You time in a day.  Since you can change the settings to suit you, this can be a great way to make sure you’re getting the breaks you need. Install Workrave on Windows If you’re using Workrave on Windows, download (link below) and install it with the default settings. One installation setting you may wish to change is the startup.  By default Workrave will run automatically when you start your computer; if you don’t want this, you can simply uncheck the box and proceed with the installation. Once setup is finished, you can run Workrave directly from the installer. Or you can open it from your start menu by entering “workrave” in the search box. Install Workrave in Ubuntu If you wish to use it in Ubuntu, you can install it directly from the Ubuntu Software Center.  Click the Applications menu, and select Ubuntu Software Center. Enter “workrave” into the search box in the top right corner of the Software Center, and it will automatically find it.  Click the arrow to proceed to Workrave’s page. This will give you information about Workrave; simply click Install to install Workrave on your system. Enter your password when prompted. Workrave will automatically download and install.   When finished, you can find Workrave in your Applications menu under Universal Access. Using Workrave Workrave by default shows a small counter on your desktop, showing the length of time until your next Micro break (30 second break), Rest break (10 minute break), and max amount of computer usage for the day. When it’s time for a micro break, Workrave will popup a reminder on your desktop. If you continue working, it will disappear at the end of the timer.  If you stop, it will start a micro-break which will freeze most on-screen activities until the timer is over.  You can click Skip or Postpone if you do not want to take a break right then. After an hour of work, Workrave will give you a 10 minute rest break.  During this it will show you some exercises that can help eliminate eyestrain, muscle tension, and other problems from prolonged computer usage.  You can click through the exercises, or can skip or postpone the break if you wish.   Preferences You can change your Workrave preferences by right-clicking on its icon in your system tray and selecting Preferences. Here you can customize the time between your breaks, and the length of your breaks.  You can also change your daily computer usage limit, and can even turn off the postpone and skip buttons on notifications if you want to make sure you follow Workrave and take your rests! From the context menu, you can also choose Statistics.  This gives you an overview of how many breaks, prompts, and more were shown on a given day.  It also shows a total Overdue time, which is the total length of the breaks you skipped or postponed.  You can view your Workrave history as well by simply selecting a date on the calendar.   Additionally, the Activity tab in the Statics pane shows more info about your computer usage, including total mouse movement, mouse button clicks, and keystrokes. Conclusion Whether you’re suffering with Carpal Tunnel or trying to prevent it, Workrave is a great solution to help remind you to get away from your computer periodically and rest.  Of course, since you can simply postpone or skip the prompts, you’ve still got to make an effort to help your own health.  But it does give you a great way to remind yourself to get away from the computer, and especially for geeks, this may be something that we really need! Download Workrave Similar Articles Productive Geek Tips Switch to the Dvorak Keyboard Layout in XPAccess Your MySQL Server Remotely Over SSHHow to Secure Gaim Instant Messenger traffic at Work with SecureCRT and SSHConnect to VMware Server Console Over SSHDisclaimers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader

    Read the article

  • SQL Saturday 43 in Redmond

    - by AjarnMark
    I attended my first SQLSaturday a couple of days ago, SQLSaturday #43 in Redmond (at Microsoft).  I got there really early, primarily because I forgot how fast I can get there from my home when nobody else is on the road.  On a weekday in rush hour traffic, that would have taken two hours to get there.  I gave myself 90 minutes, and actually got there in about 45.  Crazy! I made the mistake of going to the main Microsoft campus, but that’s not where the event was being held.  Instead it was in a big Microsoft conference center on the other side of the highway.  Fortunately, I had the address with me and quickly realized my mistake.  When I got back on track, I noticed that there were bright yellow signs out on the street corner that looked like they said they were for SOL Saturday, which actually was appropriate since it was the sunniest day around here in a long time. Since I was there so early, the registration was just getting setup, so I found Greg Larsen who was coordinating things and offered to help.  He put me to work with a group of people organizing the pre-printed raffle tickets and stuffing swag bags. I had never been to a SQLSaturday before this one, so I wasn’t exactly sure what to expect even though I have read about a few on some blogs.  It makes sense that each one will be a little bit different since they are almost completely volunteer driven, and the whole concept is still in its early stages.  I have been to the PASS Summit for the last several years, and was hoping for a smaller version of that.  Now, it’s not really fair to compare one free day of training run entirely by volunteers with a multi-day, $1,000+ event put on under the direction of a professional event management company.  But there are some parallels. At this SQLSaturday, there was no opening general session, just coffee and pastries in the common area / expo hallway and straight into the first group of sessions.  I don’t know if that was because there was no single room large enough to hold everyone, or for other reasons.  This worked out okay, but the organization guy in me would have preferred to have even a 15 minute welcome message from the organizers with a little overview of the day.  Even something as simple as, “Thanks to persons X, Y, and Z for helping put this together…Sessions will start in 20 minutes and are all in rooms down this hallway…the bathrooms are on the other side of the conference center…lunch today is pizza and we would like to thank sponsor Q for providing it.”  It doesn’t need to be much, certainly not a full-blown Keynote like at the PASS Summit, but something to use as a rallying point to pull everyone together and get the day off to an official start would be nice.  Again, there may have been logistical reasons why that was not feasible here.  I’m just putting out my thoughts for other SQLSaturday coordinators to consider. The event overall was great.  I believe that there were over 300 in attendance, and everything seemed to run smoothly.  At least from an attendee’s point of view where there was plenty of muffins in the morning and pizza in the afternoon, with plenty of pop to drink.  And hey, if you’ve got the food and drink covered, a lot of other stuff could go wrong and people will be very forgiving.  But as I said, everything appeared to run pretty smoothly, at least until Buck Woody showed up in his Oracle shirt.  Other than that, the volunteers did a great job! I was a little surprised by how few people in my own backyard that I know.  It makes sense if you really think about it, given how many companies must be using SQL Server around here.  I guess I just got spoiled coming into the PASS Summit with a few contacts that I already knew would be there.  Perhaps I have been spending too much time with too few people at the Summits and I need to step out and meet more folks.  Of course, it also is different since the Summit is the big national event and a number of the folks I know are spread out across the country, so the Summit is the only time we’re all in the same place at the same time.  I did make a few new contacts at SQLSaturday, and bumped into a couple of people that I knew (and a couple others that I only knew from Twitter, and didn’t even realize that they were here in the area). Other than the sheer entertainment value of Buck Woody’s session, the one that was probably the greatest value for me was a quick introduction to PowerShell.  I have not done anything with it yet, but I think it will be a good tool to use to implement my plans for automated database recovery testing.  I saw just enough at the session to take away some of the intimidation factor, and I am getting ready to jump in and see what I can put together in the next few weeks.  And that right there made the investment worthwhile.  So I encourage you, if you have the opportunity to go to a SQLSaturday event near you, go for it!

    Read the article

  • WebLogic 12.1.2 launch webcast on-demand & WebLogic Community feedback

    - by JuergenKress
    You missed the WebLogic & Coherence & JDeveloper 12.1.2 launch Webcast? Watch it on-demand: View On-Demand Version Read the Q&A from this Webcast Special thanks for Frank Munz and Simon Haslams our WebLogic Community experts on the phone!Thanks for the community for the great twitter feedback send us your tweets @wlscommunity #WebLogicCommunity WebLogic Community Join the #WebLogic Partner Community for the latest WebLogic 12.1.2 details and upcoming trainings http://www.WeblogicCommunity.com #OracleCAF Oracle WebLogic ?Unified update, patch, install process is a key component in reducing Ops cost in #WebLogic 12c #OracleCAF WebLogic Community Demo time #WebLogic cluster creation in seconds #OracleCAF by @mike_lehmann & Will Lyons #WebLogicCommunity pic.twitter.com/gyb8YqnKco Oracle WebLogic ?Dynamic server clusters to scale apps - coming up in #WebLogic 12c launch. #OracleCAF http://pub.vitrue.com/lBmE Oracle WebLogic ?Key feature of #WebLogic 12.1.2 release: @Oracle Database 12c integration. #OracleCAF #OracleDB OTNArchBeat ?Many tech posts on #weblogic available on #oracleace Rene van Wijk's blog. #OracleCAF http://pub.vitrue.com/O9Cn Frank Munz ?Correct me if I am wrong, but this could be the first WebLogic 12.1.2 training ever: http://www.ausoug.org.au/insync13/insync13-frank-munz.html … Cloud Foundation ?.#WebLogic 12.1.2 deep dive starts NOW during #OracleCAF launch. #Coherence up next in a few minutes. http://pub.vitrue.com/HPHM Maciej Gruszka ?Watch http://www.youtube.com/watch?v=KiCoO_QGBsU&feature=c4-overview&list=UUrEIV9YO17leE9aJWamKEPw … at #WebLogic channel with @dave_cabelus about Elastic JMS Oracle WebLogic ?Pick up the new book by @frankmunz on WLS 12c http://amzn.to/1ceppgZ #WebLogic #OracleCAF OTNArchBeat ?@OTNArchBeat 31 Jul @frankmunz 's #WebLogic YouTube channel >> watch and learn #OracleCAF http://pub.vitrue.com/B4IM WebLogic Community ?@frankmunz WebLogic expert build elastic clouds with #WebLogic http://www.munzandmore.com/blog #OracleCAF #WebLogicCommunity pic.twitter.com/UK5UKjXUVl OTNArchBeat @frankmunz 's blog, covering #weblog #cloud and more #OracleCAF http://pub.vitrue.com/N8ST OTNArchBeat ?oracladmin: @simon_haslam 's Oracle Fusion Middleware blog #OracleCAF #oracleace http://pub.vitrue.com/cwGx Yuri Grinshteyn ?Coherence uses WLS tooling, including deployment, and can be part of the WLS cluster. Well done there. #OracleCAF Maciej Gruszka ?#Coherence 12.1.2 auto updates data grid on changes inside DB thru #GoldenGate HotCache - another cool feature of #OracleCAF Oracle WebLogic ?From #OracleCAF launch: Tight integration tween WLS, #Coherence and #OracleDB. Dynamic clusters, OSS support & more http://pub.vitrue.com/3NL9 OTNArchBeat ?25 recent no-fluff technical articles on Oracle WebLogic #OracleCAF http://pub.vitrue.com/FEG5 Maciej Gruszka ?@dave_cabelus Elastic JMS is my favourite capability of #WebLogic 12.1.2 WebLogic Community ?Dynamic WebLogic Clustering COOL - what is Wour favorite 12.1.2 feature? #OracleCAF #WebLogicCommunity pic.twitter.com/T8lvDMJ1U0 WebLogic Community ?What is the coolest #WebLogic 12.1.2 feature? Let us know @wlscommunity http://weblogiccommunity.com/2013/07/30/launch-webcast-weblogic-coherence-jdeveloper-adf-12-1-2-00-july-31st-2013/ … #WebLogicCommunity Simon Haslam ?I'm speaking(!) on the panel session with @frankmunz & Matt Rosen on the CAF/WebLogic 12.1.2 launch: 6pm UK today https://event.on24.com/eventRegistration/EventLobbyServlet?target=registration.jsp&eventid=651242&partnerref=CAF_Launch_OCOM_07312013&sourcepage=register … Markus Eisele ?#WebLogic 12.1.2 - an Important New Release for Middleware Admins http://bit.ly/1cmtqhX by @simon_haslam OracleEnterpriseMgr ?The JVM diagnostics features of #EM12c are now shown in a demo by @hawkinsg1 at the #OracleCAF launch http://bit.ly/caflaunch Shaun Smith ?Curious about the new #Coherence 12.1.2 GoldenGate HotCache feature? I explain all on youtube: http://www.youtube.com/watch?v=O0TIG3hgbg0&feature=share&list=PLxqhEJ4CA3JtQwuPS8Qmd88lGX-gsIbHV … #OracleCAF Maciej Gruszka ?Try for Yourself -- Download the products Oracle WebLogic 12.1.2: http://www.oracle.com/technetwork/middleware/fusion-middleware/downloads/index.html … Oracle Coherence 12c: http://www.oracle.com/technetwork/middleware/coherence/downloads/index.htm … WebLogic Community ?What is Your favorite feature in #WebLogic 12.1.2 ? cool stuff! #OracleCAF #WebLogicCommunity http://WeblogicCommunity.com pic.twitter.com/xjR05tiaQj We encourage you to learn more about all the products by reviewing the following resources: Try for Yourself -- Download the products Oracle WebLogic 12.1.2 Oracle Coherence 12c Enterprise Manager Developer Tools WebLogic Community blog Learn more Read the Oracle WebLogic Business Whitepaper Read the Oracle Coherence Business Whitepaper Read the Oracle WebLogic and Oracle Database Integration Whitepaper Get Training from Oracle University Check out the Oracle WebLogic YouTube Channel Check out the Oracle Coherence YouTube Channel WebLogic Partner Community Registration The Webcast is available on-demand Watch Webcast Now WebLogic Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Weblogic 12.1.2,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • Profit's COLLABORATE 10 Session Selections

    - by Aaron Lazenby
    COLLABORATE 2010 is a mere 11 days away (thanks for the reminder @ocp_advisor). Every year I publish my a list of the sessions I think reflect some of the more interesting people/trends in enterprise IT. I should be at all of these sessions, so drop by for a chat--I'll be the guy tapping out emails on my iPad... Monday, April 19 9:15 a.m. - Keynote: Transforming Customer Value, Delivering Highest Customer Service Location: Keynote Hall I never miss Charles Phillips when he speaks--it's one of the best opportunities to get an update on Oracle product developments and strategy. And there's certainly occasion for an update: this will be Phillips' first big presentation since the Oracle + Sun Strategy Update in late January. Phillips is appearing with Oracle Executive Vice President of Development Thomas Kurian which means there should be some excellent information about how customers are using Oracle's complete software and hardware stack to address enterprise IT challenges. The session should provide some excellent context for the rest of the week's session...don't miss it. 10:45 a.m. - Oracle Fusion Applications: Functional Overview Location: South Seas FI met Basheer Khan at COLLABORATE 08 in Denver and have followed his work ever since. He's a former member of the OAUG Board of Directors, an Oracle ACE, and a charismatic enterprise IT expert. Having worked with the Oracle Usability Advisory Board, Basheer should have some fascinating insights to share about the features and interface of Oracle's Fusine Applications. This session, along with Nadia Bendjedou's "10 Things You Can Do Today to Prepare for the Next Generation Applications" (on Tuesday, April 20 8:00 a.m. in room 3662) should give attendees the update they need about Oracle's next-generation applications.   1:15p.m. - E-Business Suite in the Amazon Cloud Location: South Seas HI did my first full-fledged cloud computing coverage at last year's COLLABORATE show (check out my interview with Oracle's Bill Hodak), where I first learned about Amazon's EC2 offering. I've since talked with several people who have provisioned server space on Amazon's cloud with great results. So I'm looking forward to watching the audience configure an instance of the Oracle E-Business Suite release 12 on the cloud while Chuck Edwards from Blue Gecko drives. This session should take some of the mist and vapor out of the cloud conversation.2:30 p.m. - "Zero Sign-on" to EBS - Enabling 96000 Users to Login to EBS Without User Maintenance Location: South Seas HI'll be sitting tight in South Seas H for the next session on Monday where Doug Pepka, a ten-year veteran of communications giant Comcast, will be walking attendees through a massive single sign-on (SSO) project across the enterprise. I'm working on a story about SSO for the August issue of Profit, so this session has real practical value to me. Plus the proliferation of user account logins--both personal and professional--makes this a critical usability/change management issue for IT leaders planning for successful long-term IT implementations.   Tuesday 8:00 am  - Information Architecture for Men in Kilts Location: SURF AGetting to a 8:00 a.m. presentation is a tall order in Las Vegas, but presenter Billy Cripe will make it worth your effort. Not only is the title of this session great, but the content should appeal to any IT strategist looking to push the limits of Web 2.0 technologies in the enterprise. Cripe is a product management director of Enterprise 2.0 and Enterprise Content Management at Oracle, author of Reshaping Your Business with Web 2.0, and a prolific blogger--he knows how information architecture is critical to and enterprise 2.0 implementation.    10:30a.m. - Oracle Virtualization: From Desktop to Data Center Location: REEF FData center virtualization is still one of the best ways to reduce the cost of running enterprise IT. With the addition of Sun products, Oracle has the industry's most comprehensive virtualization portfolio. I must admit, I'm no expert in this subject. So I'm looking forward to Monica Kumar's presentation so I can get up to speed.   Wednesday 8:00 a.m. - The Art of the Steal Location: Mandalay Bay Ballroom JMany will know Frank Abagnale from Steven Spielberg's 2002 film "Catch Me if You Can." The one-time con man and international fugitive who swindled $2.5 million in forged checks went on to help U.S. federal officials investigate fraud cases. Now the CEO of Abagnale and Associates, he has become an invaluable source to the business world on the subject of fraud and fraud protection. With identity theft and digital fraud still on the rise, this session should be an entertaining, and sobering, education on the threats facing businesses and customers around the world. A great way to start Wednesday.1:00 p.m. - Google Wave: Will it replace e-mail as we know it today? Location: SURF EBy many assessments (my own included), Google Wave is a bit of an open collaboration failure. It may seem like an odd reason for me to be excited about this session, but I'm looking forward to the chance to revisit the technology. Also, this is a great case study in connecting free, available Internet tools to existing enterprise computing environments--an issue that IT strategists must contend with as workers spreads out and choose their own productivity tools.  

    Read the article

  • concurrency::accelerator

    - by Daniel Moth
    Overview An accelerator represents a "target" on which C++ AMP code can execute and where data can reside. Typically (but not necessarily) an accelerator is a GPU device. Accelerators are represented in C++ AMP as objects of the accelerator class. For many scenarios, you do not need to obtain an accelerator object, since the runtime has a notion of a default accelerator, which is what it thinks is the best one in the system. Examples where you need to deal with accelerator objects are if you need to pick your own accelerator (based on your specific criteria), or if you need to use more than one accelerators from your app. Construction and operator usage You can query and obtain a std::vector of all the accelerators on your system, which the runtime discovers on startup. Beyond enumerating accelerators, you can also create one directly by passing to the constructor a system-wide unique path to a device if you know it (i.e. the “Device Instance Path” property for the device in Device Manager), e.g. accelerator acc(L"PCI\\VEN_1002&DEV_6898&SUBSYS_0B001002etc"); There are some predefined strings (for predefined accelerators) that you can pass to the accelerator constructor (and there are corresponding constants for those on the accelerator class itself, so you don’t have to hardcode them every time). Examples are the following: accelerator::default_accelerator represents the default accelerator that the C++ AMP runtime picks for you if you don’t pick one (the heuristics of how it picks one will be covered in a future post). Example: accelerator acc; accelerator::direct3d_ref represents the reference rasterizer emulator that simulates a direct3d device on the CPU (in a very slow manner). This emulator is available on systems with Visual Studio installed and is useful for debugging. More on debugging in general in future posts. Example: accelerator acc(accelerator::direct3d_ref); accelerator::direct3d_warp represents a target that I will cover in future blog posts. Example: accelerator acc(accelerator::direct3d_warp); accelerator::cpu_accelerator represents the CPU. In this first release the only use of this accelerator is for using the staging arrays technique that I'll cover separately. Example: accelerator acc(accelerator::cpu_accelerator); You can also create an accelerator by shallow copying another accelerator instance (via the corresponding constructor) or simply assigning it to another accelerator instance (via the operator overloading of =). Speaking of operator overloading, you can also compare (for equality and inequality) two accelerator objects between them to determine if they refer to the same underlying device. Querying accelerator characteristics Given an accelerator object, you can access its description, version, device path, size of dedicated memory in KB, whether it is some kind of emulator, whether it has a display attached, whether it supports double precision, and whether it was created with the debugging layer enabled for extensive error reporting. Below is example code that accesses some of the properties; in your real code you'd probably be checking one or more of them in order to pick an accelerator (or check that the default one is good enough for your specific workload): void inspect_accelerator(concurrency::accelerator acc) { std::wcout << "New accelerator: " << acc.description << std::endl; std::wcout << "is_debug = " << acc.is_debug << std::endl; std::wcout << "is_emulated = " << acc.is_emulated << std::endl; std::wcout << "dedicated_memory = " << acc.dedicated_memory << std::endl; std::wcout << "device_path = " << acc.device_path << std::endl; std::wcout << "has_display = " << acc.has_display << std::endl; std::wcout << "version = " << (acc.version >> 16) << '.' << (acc.version & 0xFFFF) << std::endl; } accelerator_view In my next blog post I'll cover a related class: accelerator_view. Suffice to say here that each accelerator may have from 1..n related accelerator_view objects. You can get the accelerator_view from an accelerator via the default_view property, or create new ones by invoking the create_view method that creates an accelerator_view object for you (by also accepting a queuing_mode enum value of deferred or immediate that we'll also explore in the next blog post). Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • Converting Creole to HTML, PDF, DOCX, ..

    - by Marko Apfel
    Challenge We documented a project on Github with the Wiki there. For most articles we used Creole as markup language. Now we have to deliver a lot of the content to our client in an usual format like PDF or DOCX. So we need a automatism to extract all relevant content, merge it together and convert the stuff to a new format. Problem One of the most popular toolsets to convert between several formats is Pandoc. But unfortunally Pandoc does not support Creole (see the converting matrix). Approach So we need an intermediate step: Converting from Creole to a supported Pandoc format. Creolo/c is a Creole to Html converter and does exactly what we need. After converting our Creole content to Html we could use Pandoc for all the subsequent tasks. Solution Getting the Creole stuff First at all we need the Creole content on our locale machines. This is easy. Because the Github Wiki themselves is a Git repository we could clone it to our machine. In the working copy we see now all the files and the suffix gives us the hint for the markup language. Converting and Merging Creole content to Html Because we would like all content from several Creole files in one HTML file, we have to convert and merge all the input files to one output file. Creole/c has an option (-b) to generate only the Html-stuff below a Html <Body>-tag. And this is hook for us to start. We have to create manually the additional preluding Html-tags (<html>, <head>, ..), then we merge all needed Creole content to our output file and last we add the closing tags. This could be done straightforward with a little bit old DOS magic: REM === Generate the intro tags === ECHO ^<html^> > %TMP%\output.html ECHO ^<head^> >> %TMP%\output.html ECHO ^<meta name="generator" content="creole/c"^> >> %TMP%\output.html ECHO ^</head^> >> %TMP%\output.html ECHO ^<body^> >> %TMP%\output.html REM === Mix in all interesting Creole stuff with creole/c === .\Creole-C\bin\creole.exe -b .\..\datamodel+overview.creole >> %TMP%\output.html .\Creole-C\bin\creole.exe -b .\..\datamodel+domain+CvdCaptureMode.creole >> %TMP%\output.html .\Creole-C\bin\creole.exe -b .\..\datamodel+domain+CvdDamageReducingActivity.creole >> %TMP%\output.html .\Creole-C\bin\creole.exe -b .\..\datamodel+lookup+IncidentDamageCodes.creole >> %TMP%\output.html .\Creole-C\bin\creole.exe -b .\..\datamodel+table+Attachments.creole >> %TMP%\output.html .\Creole-C\bin\creole.exe -b .\..\datamodel+table+TrafficLights.creole >> %TMP%\output.html REM === Generate the outro tags === ECHO ^</body^> >> %TMP%\output.html ECHO ^</html^> >> %TMP%\output.html REM === Convert the Html file to Docx with Pandoc === .\Pandoc\bin\pandoc.exe -o .\Database-Schema.docx %TMP%\output.html Some explanation for this The first ECHO call creates the file. Therefore the beginning <html> tag is send via > to a temporary working file. All following calls add content to the existing file via >>. The tag-characters < and > must be escaped. This is done by the caret sign (^). We use a file in the default temporary folder (%TMP%) to avoid writing in our current folders. (better for continuous integration) Both toolsets (Creole/c and Pandoc) are copied to a versioned tools folder in the Wiki. This is committable and no problem after pushing – Github does not do anything with it. In this folder is also the batch (Export-Docx.bat) for all the steps. Pandoc recognizes the conversion by the suffixes of the file names. So it is enough to specify only the input and output files.

    Read the article

  • DVD not detected?

    - by Benjamin
    As i insert a DVD in my drive (on a laptop) using Kubuntu 12.04, the DVD is not detected. The drive takes the DVD, I can hear it munching on it for a while, and then nothing. Even ejecting the DVD becomes a hassle, I need to do that at boot time otherwise the OS won't allow me to eject. Kubuntu 12.04 used to read and mount the same DVDs just fine a week ago. Edit: since I am able to boot from CD, can I safely assume the issue is not a hardware issue? How can I fix this? wodim --devices returns: wodim: Overview of accessible drives (1 found) : ------------------------------------------------------------------------- 0 dev='/dev/sg1' rwrw-- : 'Optiarc' 'DVD+-RW AD-7640A' ------------------------------------------------------------------------- sudo lshw -class disk returns: *-cdrom description: DVD-RAM writer product: DVD+-RW AD-7640A vendor: Optiarc physical id: 0.0.0 bus info: scsi@3:0.0.0 logical name: /dev/cdrom2 logical name: /dev/cdrw2 logical name: /dev/dvd2 logical name: /dev/dvdrw2 logical name: /dev/sr0 version: JD06 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=open lspci returns: 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c) 00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) 06:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:05.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 08:05.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02) 08:05.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) and lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0c45:63e0 Microdia Sonix Integrated Webcam Bus 003 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader The /etc/modprobe.d/blacklist.conf contains: # This file lists those modules which we don't want to be loaded by # alias expansion, usually so some other driver will be loaded for the # device instead. # evbug is a debug tool that should be loaded explicitly blacklist evbug # these drivers are very simple, the HID drivers are usually preferred blacklist usbmouse blacklist usbkbd # replaced by e100 blacklist eepro100 # replaced by tulip blacklist de4x5 # causes no end of confusion by creating unexpected network interfaces blacklist eth1394 # snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much # hardware on its own (Ubuntu bug #2011, #6810) blacklist snd_intel8x0m # Conflicts with dvb driver (which is better for handling this device) blacklist snd_aw2 # causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306) blacklist i2c_i801 # replaced by p54pci blacklist prism54 # replaced by b43 and ssb. blacklist bcm43xx # most apps now use garmin usb driver directly (Ubuntu: #114565) blacklist garmin_gps # replaced by asus-laptop (Ubuntu: #184721) blacklist asus_acpi # low-quality, just noise when being used for sound playback, causes # hangs at desktop session start (Ubuntu: #246969) blacklist snd_pcsp # ugly and loud noise, getting on everyone's nerves; this should be done by a # nice pulseaudio bing (Ubuntu: #77010) blacklist pcspkr # EDAC driver for amd76x clashes with the agp driver preventing the aperture # from being initialised (Ubuntu: #297750). Blacklist so that the driver # continues to build and is installable for the few cases where its # really needed. blacklist amd76x_edac

    Read the article

  • Five Reasons to Attend PLM Summit 2013: The Conference Formerly Known as AGILITY

    - by Terri Hiskey
    As we approach the end of 2012, we are also closing in on the last couple of weeks that Agile customers and prospects can register for the upcoming PLM Summit 2013 for the bargain early bird rate of $195. Register now to secure your spot! The Conference Formerly Known as AGILITY... Long-time Agile customers may remember AGILITY, which was Agile's PLM customer conference that was held on an annual basis prior to Oracle's acquisiton of Agile in 2007. In February 2012, due to feedback we received from our Agile PLM community, we successfully resurrected the AGILITY conference and renamed it the PLM Summit. The PLM Summit was so well received and well-attended, that we are doing it again in 2013. This upcoming PLM Summit is being co-located in San Francisco under the overarching banner of the Oracle Value Chain Summit, and will be held alongside several other Oracle customer conferences that cover a range of value chain solutions, including Value Chain Planning, Value Chain Execution, Procurement, Maintenance and Manufacturing. This setup offers PLM attendees the best of all worlds--the opportunity to participate and learn about PLM in smaller, focused sessions by product and by industry, while also giving attendees the chance to see how PLM works together with other critical enterprise applications that address other important aspects of the value chain. Top Five Reasons to Attend the PLM Summit 2013 In the spirit of all of the end-of-the-year lists that are currently popping up, here is a list of the top five reasons to attend the PLM Summit for anyone out there needs a little extra encouragement to register: 1. The Best Opportunities for Customer Networking   The PLM Summit offers attendees numerous opportunities to learn and network with fellow Agile users. Customer stories are featured in keynote and breakout presentations and the schedule allows for plenty of networking time during breakfasts, lunches, breaks and dinners. Customer networking is the number one reason that Agile users attend the PLM Summit. Read what attendees thought of the most recent PLM Summit: "Hearing about the implementation of Agile products from a customers’ perspective is invaluable." - Director of Quality Assurance & Regulatory Affairs, leading medical device manufacturer "Understanding the scope of other companies’ projects and the lessons learned made attending this event well worth my time." - Director of Test Engineering, global industrial manufacturer "The most beneficial thing about attending this event is the opportunity to network with other customers with similar experiences." - Director of Business Process Improvement, leading high technology company Come to the PLM Summit and play an active role within the PLM community: swap war stories and business cards, connect on LinkedIn and Facebook, share your stories and discuss the sessions from each day. Register now! 2. It's Educational! The PLM Summit is the premier educational event for anyone in the Agile PLM community. There are nearly 40 PLM-focused in-depth educational sessions led by Agile PLM experts, customers and partners that will cover a range of specific product and industry-focused topics. Keynotes will give attendees a broad overview of the entire Agile PLM footprint, while sessions will delve deeply into specific product functionality and customer case studies. There is truly something for everyone. Check out the latest agenda for view of all the sessions. 3. Visit with the PLM Partner Community Our partners play a significant and important role within the Agile PLM community. At the PLM Summit, attendees will be able to meet and mingle with several of the top Oracle Agile PLM partners including: Deloitte, Domain, GoEngineer, Hitachi Consulting, IBM, Kalypso, KPIT Cummins (CPG Solutions), Perception Software, Verdant, Xavor and ZeroWaitState. Go here for a complete list of all the Value Chain Summit sponsors. 4. See Agile PLM in Action at our Dedicated PLM Demo Pods At the PLM Summit, attendees will have the chance to see Agile PLM in action at dedicated PLM demo pods, manned by expert members of our Agile PLM team. If you would like to see up close specific Agile PLM functionality, or if you have a question on how to extend the scope of your current implemention or if you want a better understanding of how to leverage Agile PLM to address specific use-cases, stop by one of the Agile PLM demo pods and engage the Agile PLM experts on hand at the PLM Summit. 5. Spend Some Time in Lovely San Francisco Still on the fence about the upcoming PLM Summit? Remember that it is being held in San Francisco, which is a fantastic city for a getaway. After spending time learning and networking about PLM, take an extra day or two to escape the dreary winter and enjoy the beautiful scenery and the unique actitivies offered only by the City by the Bay. You will walk away from the conference not only with renewed excitement about Agile PLM, but feeling rejuvenated in general.

    Read the article

  • List of Commonly Used Value Types in XNA Games

    - by Michael B. McLaughlin
    Most XNA programmers are concerned about generating garbage. More specifically about allocating GC-managed memory (GC stands for “garbage collector” and is both the name of the class that provides access to the garbage collector and an acronym for the garbage collector (as a concept) itself). Two of the major target platforms for XNA (Windows Phone 7 and Xbox 360) use variants of the .NET Compact Framework. On both variants, the GC runs under various circumstances (Windows Phone 7 and Xbox 360). Of concern to XNA programmers is the fact that it runs automatically after a fixed amount of GC-managed memory has been allocated (currently 1MB on both systems). Many beginning XNA programmers are unaware of what constitutes GC-managed memory, though. So here’s a quick overview. In .NET, there are two different “types” of types: value types and reference types. Only reference types are managed by the garbage collector. Value types are not managed by the garbage collector and are instead managed in other ways that are implementation dependent. For purposes of XNA programming, the important point is that they are not managed by the GC and thus do not, by themselves, increment that internal 1 MB allocation counter. (n.b. Structs are value types. If you have a struct that has a reference type as a member, then that reference type, when instantiated, will still be allocated in the GC-managed memory and will thus count against the 1 MB allocation counter. Putting it in a struct doesn’t change the fact that it gets allocated on the GC heap, but the struct itself is created outside of the GC’s purview). Both value types and reference types use the keyword ‘new’ to allocate a new instance of them. Sometimes this keyword is hidden by a method which creates new instances for you, e.g. XmlReader.Create. But the important thing to determine is whether or not you are dealing with a value types or a reference type. If it’s a value type, you can use the ‘new’ keyword to allocate new instances of that type without incrementing the GC allocation counter (except as above where it’s a struct with a reference type in it that is allocated by the constructor, but there are no .NET Framework or XNA Framework value types that do this so it would have to be a struct you created or that was in some third-party library you were using for that to even become an issue). The following is a list of most all of value types you are likely to use in a generic XNA game: AudioCategory (used with XACT; not available on WP7) AvatarExpression (Xbox 360 only, but exposed on Windows to ease Xbox development) bool BoundingBox BoundingSphere byte char Color DateTime decimal double any enum (System.Enum itself is a class, but all enums are value types such that there are no GC allocations for enums) float GamePadButtons GamePadCapabilities GamePadDPad GamePadState GamePadThumbSticks GamePadTriggers GestureSample int IntPtr (rarely but occasionally used in XNA) KeyboardState long Matrix MouseState nullable structs (anytime you see, e.g. int? something, that ‘?’ denotes a nullable struct, also called a nullable type) Plane Point Quaternion Ray Rectangle RenderTargetBinding sbyte (though I’ve never seen it used since most people would just use a short) short TimeSpan TouchCollection TouchLocation TouchPanelCapabilities uint ulong ushort Vector2 Vector3 Vector4 VertexBufferBinding VertexElement VertexPositionColor VertexPositionColorTexture VertexPositionNormalTexture VertexPositionTexture Viewport So there you have it. That’s not quite a complete list, mind you. For example: There are various structs in the .NET framework you might make use of. I left out everything from the Microsoft.Xna.Framework.Graphics.PackedVector namespace, since everything in there ventures into the realm of advanced XNA programming anyway (n.b. every single instantiable thing in that namespace is a struct and thus a value type; there are also two interfaces but interfaces cannot be instantiated at all and thus don’t figure in to this discussion). There are so many enums you’re likely to use (PlayerIndex, SpriteSortMode, SpriteEffects, SurfaceFormat, etc.) that including them would’ve flooded the list and reduced its utility. So I went with “any enum” and trust that you can figure out what the enums are (and it’s rare to use ‘new’ with an enum anyway). That list also doesn’t include any of the pre-defined static instances of some of the classes (e.g. BlendState.AlphaBlend, BlendState.Opaque, etc.) which are already allocated such that using them doesn’t cause any new allocations and therefore doesn’t increase that 1 MB counter. That list also has a few misleading things. VertexElement, VertexPositionColor, and all the other vertex types are structs. But you’re only likely to ever use them as an array (for use with VertexBuffer or DynamicVertexBuffer), and all arrays are reference types (even arrays of value types such as VertexPositionColor[ ] or int[ ]). * So that’s it for now. The note below may be a bit confusing (it deals with how the GC works and how arrays are managed in .NET). If so, you can probably safely ignore it for now but feel free to ask any questions regardless. * Arrays of value types (where the value type doesn’t contain any reference type members) are much faster for the GC to examine than arrays of reference types, so there is a definite benefit to using arrays of value types where it makes sense. But creating arrays of value types does cause the GC’s allocation counter to increase. Indeed, allocating a large array of a value type is one of the quickest ways to increment the allocation counter since a .NET array is a sequential block of memory. An array of reference types is just a sequential block of references (typically 4 bytes each) while an array of value types is a sequential block of instances of that type. So for an array of Vector3s it would be 12 bytes each since each float is 4 bytes and there are 3 in a Vector3; for an array of VertexPositionNormalTexture structs it would typically be 32 bytes each since it has two Vector3s and a Vector2. (Note that there are a few additional bytes taken up in the creation of an array, typically 12 but sometimes 16 or possibly even more, which depend on the implementation details of the array type on the particular platform the code is running on).

    Read the article

  • Demystified - BI in SharePoint 2010

    - by Sahil Malik
    Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). Frequently, my clients ask me if there is a good guide on deciphering the seemingly daunting choice of products from Microsoft when it comes to business intelligence offerings in a SharePoint 2010 world. These are all described in detail in my book, but here is a one (well maybe two) page executive overview. Microsoft Excel: Yes, Microsoft Excel! Your favorite and most commonly used in the world database. No it isn’t a database in technical pure definitions, but this is the most commonly used ‘database’ in the world. You will find many business users craft up very compelling excel sheets with tonnes of logic inside them. Good for: Quick Ad-Hoc reports. Excel 64 bit allows the possibility of very large datasheets (Also see 32 bit vs 64 bit Office, and PowerPivot Add-In below). Audience: End business user can build such solutions. Related technologies: PowerPivot, Excel Services Microsoft Excel with PowerPivot Add-In: The powerpivot add-in is an extension to Excel that adds support for large-scale data. Think of this as Excel with the ability to deal with very large amounts of data. It has an in-memory data store as an option for Analysis services. Good for: Ad-hoc reporting and logic with very large amounts of data. Audience: End business user can build such solutions. Related technologies: Excel, and Excel Services Excel Services: Excel Services is a Microsoft SharePoint Server 2010 shared service that brings the power of Excel to SharePoint Server by providing server-side calculation and browser-based rendering of Excel workbooks. Thus, excel sheets can be created by end users, and published to SharePoint server – which are then rendered right through the browser in read-only or parameterized-read-only modes. They can also be accessed by other software via SOAP or REST based APIs. Good for: Sharing excel sheets with a larger number of people, while maintaining control/version control etc. Sharing logic embedded in excel sheets with other software across the organization via REST/SOAP interfaces Audience: End business users can build such solutions once your tech staff has setup excel services on a SharePoint server instance. Programmers can write software consuming functionality/complex formulae contained in your sheets. Related technologies: PerformancePoint Services, Excel, and PowerPivot. Visio Services: Visio Services is a shared service on the Microsoft SharePoint Server 2010 platform that allows users to share and view Visio diagrams that may or may not have data connected to them. Connected data can update these diagrams allowing a visual/graphical view into the data. The diagrams are viewable through the browser. They are rendered in silverlight, but will automatically down-convert to .png formats. Good for: Showing data as diagrams, live updating. Comes with a developer story. Audience: End business users can build such solutions once your tech staff has setup visio services on a SharePoint server instance. Developers can enhance the visualizations Related Technologies: Visio Services can be used to render workflow visualizations in SP2010 Reporting Services: SQL Server reporting services can integrate with SharePoint, allowing you to store reports and data sources in SharePoint document libraries, and render these reports and associated functionality such as subscriptions through a SharePoint site. In SharePoint 2010, you can also write reports against SharePoint lists (access services uses this technique). Good for: Showing complex reports running in a industry standard data store, such as SQL server. Audience: This is definitely developer land. Don’t expect end users to craft up reports, unless a report model has previously been published. Related Technologies: PerformancePoint Services PerformancePoint Services: PerformancePoint Services in SharePoint 2010 is now fully integrated with SharePoint, and comes with features that can either be used in the BI center site definition, or on their own as activated features in existing site collections. PerformancePoint services allows you to build reports and dashboards that target a variety of back-end datasources including: SQL Server reporting services, SQL Server analysis services, SharePoint lists, excel services, simple tables, etc. Using these you have the ability to create dashboards, scorecards/kpis, and simple reports. You can also create reports targeting hierarchical multidimensional data sources. The visual decomposition tree is a new report type that lets you quickly breakdown multi-dimensional data. Good for: Mostly everything :), except your wallet – it’s not free! But this is the most comprehensive offering. If you have SharePoint server, forget everything and go with performance point. Audience: Developers need to setup the back-end sources, manageability story. DBAs need to setup datawarehouses with cubes. Moderately sophisticated business users, or developers can craft up reports using dashboard designer which is a click-once App that deploys with PerformancePoint Related Technologies: Excel services, reporting services, etc.   Other relevant technologies to know about: Business Connectivity Services: Allows for consumption of external data in SharePoint as columns or external lists. This can be paired with one or more of the above BI offerings allowing insight into such data. Access Services: Allows the representation/publishing of an access database as a SharePoint 2010 site, leveraging many SharePoint features. Reporting services is used by Access services. Secure Store Service: The SP2010 Secure store service is a replacement for the SP2007 single sign on feature. This acts as a credential policeman providing credentials to various applications running with SharePoint. BCS, PerformancePoint Services, Excel Services, and many other apps use the SSS (Secure Store Service) for credential control. Comment on the article ....

    Read the article

  • Find the best OpenWorld sessions for learning about UX highlights

    - by mvaughan
    By Kathy Miedema, Oracle Applications User Experience  Have you clicked through the Oracle OpenWorld 2012 catalog? It’s amazingly dense, as usual. But one thing we noticed this year is that nearly half of the sessions mention some component of user experience, which is a sea change in our world. It means that more people understand, appreciate, and desire an effective user experience, and it also means that Oracle’s investment in its next-generation applications user experience, such as Oracle Fusion Applications, is increasingly apparent and interesting to its customers. So how do you choose the user experience sessions that make the most sense for you and your organization? Read our list to find out which sessions we think offer the most value for those interested in finding out more about the Oracle Applications user experience. If you’re interested in Oracle’s strategy for its user experience: CON9438: Oracle Fusion Applications: Transforming Insight into Action10:15 - 11:15 a.m. Tuesday, Oct. 2; Moscone West – 2007 CON9467: Oracle’s Roadmap to a Simple, Modern User Experience3:30 - 4:30 p.m. Wednesday, Oct. 3; Moscone West - 3002/3004 CON8718: Oracle Fusion Applications: Customizing and Extending with Oracle Composers11:15 a.m. - 12:15 p.m. Thursday, Oct. 4; Moscone West – 2008 GEN9663: General Session: A Panel of Masterminds—Where Are Oracle Applications Headed?1:45 - 2:45 p.m. Monday, Oct. 1; Moscone North - Hall D If you’re interested in PeopleSoft/PeopleTools: GEN8928: General Session: PeopleSoft Update and Product Roadmap3:15 - 4:15 p.m. Monday, Oct. 1; Moscone West - 3002/3004 CON9183: PeopleSoft PeopleTools Technology Roadmap4:45 - 5:45 p.m. Monday, Oct. 1; Moscone West - 3002/3004 CON8932: New Functional PeopleSoft PeopleTools Capabilities for the Line-of-Business User5:00 - 6:00 p.m. Tuesday, Oct. 2; Moscone West – 3007 If you’re interested in E-Business Suite: GEN8474: General Session: Oracle E-Business Suite—Strategy, Update, and Roadmap12:15 - 1:15 p.m. Monday, Oct. 1; Moscone West - 2002/2004 CON9026: Latest Oracle E-Business Suite 12.1 User Interface and Usability Enhancements1:15 - 2:15 p.m. Tuesday, Oct. 2; Moscone West – 2016 If you’re interested in Siebel: CON9700: Siebel CRM Overview, Strategy, and Roadmap12:15 - 1:15 p.m. Monday, Oct. 1; Moscone West – 2009 CON9703: User Interface Innovations with the New Siebel “Open UI”10:15 - 11:15 a.m. Tuesday, Oct. 2; Moscone West – 2009 If you’re interested in JD Edwards EnterpriseOne: HOL10452: JD Edwards EnterpriseOne 9.1 User Interface Changes10:15 - 11:15 a.m. Wednesday, Oct. 3; Marriott Marquis - Nob Hill AB CON9160: Showcase of the JD Edwards EnterpriseOne User Experience1:15 - 2:15 p.m. Wednesday, Oct. 3; InterContinental - Grand Ballroom B CON9159: Euphoria with the JD Edwards EnterpriseOne User Experience11:45 a.m. - 12:45 p.m. Wednesday, Oct. 3; InterContinental - Grand Ballroom B If you’re interested in Oracle Fusion Applications user experience design patterns: Functional design patterns that helped create the Oracle Fusion Applications user experience are now available. Learn more about these new, reusable usability solutions and best-practices at the Oracle JDeveloper and Oracle ADF demopods during Oracle OpenWorld 2012. Or visit the OTN Lounge between 4:30 p.m. and 6 p.m. on Wednesday, Oct. 3, to talk to Ultan O'Broin from the Oracle Applications User Experience team.    Demopod location: Moscone Center, South Exhibition Hall Level 1, S-207 OTN (Oracle Technology Network) Lounge: Howard Street tent On the demogrounds: Head to the demogrounds to see new demos from the Applications User Experience team, including the new look for Fusion Applications and what we’re building for mobile platforms. Take a spin on our eye tracker, a very cool tool that we use to research the usability of a particular design. Visit the Usable Apps OpenWorld page to find out where our demopods will be located.Photo by Martin Taylor, Oracle Applications User ExperienceA tour takes place in one of the usability labs at Oracle’s headquarters in Redwood Shores, Calif. At our labs, on-site and at HQ: We are also recruiting participants for our on-site lab, in which we gather feedback on new user experience designs, and taking reservations for a charter bus that will bring you to Oracle headquarters for a lab tour Thursday, Oct. 4, or Friday, Oct. 5. Tours leave at 10 a.m. and 1:45 p.m. from the Moscone Center in San Francisco. You’ll see more of our newest designs at the lab tour, and some of our research tools in action. For more information on any OpenWorld sessions, check the content catalog, also available at www.oracle.com/openworld. For information on Applications User Experience (Apps UX) sessions and activities, go to the Usable Apps OpenWorld page.

    Read the article

  • JQuery and the multiple date selector

    - by David Carter
    Overview I recently needed to build a web page that would allow a user to capture some information and most importantly select multiple dates. This functionality was core to the application and hence had to be easy and quick to do. This is a public facing website so it had to be intuitive and very responsive. On the face of it it didn't seem too hard, I know enough juery to know what it is capable of and I was pretty sure that there would be some plugins that would help speed things along the way. I'm using ASP.Net MVC for this project as I really like the control that it gives you over the generated html and javascript. After years of Web Forms development it makes me feel like a web developer again and puts a smile on my face, that can only be a good thing!   The Calendar The first item that I needed on this page was a calender and I wanted the ability to: have the calendar be always visible select/deselect multiple dates at the same time bind to the select/deselect event so that I could update a seperate listing of the selected dates allow the user to move to another month and still have the calender remember any dates in the previous month I was hoping that there was a jQuery plugin that would meet my requirements and luckily there was! The jQuery datepicker does everything I want and there is quite a bit of documentation on how to use it. It makes use of a javascript date library date.js which I had not come across before but has a number of very useful date utilities that I have used elsewhere in the project. As you can see from the image there still needs to be some styling done! But there will be plenty of time for that later. The calendar clearly shows which dates the user has selected in red and i also make use of an unordered list to show the the selected dates so the user can always clearly see what has been selected even if they move to another month on the calendar. The javascript code that is responsible for listening to events on the calendar and synchronising the list look as follows: <script type="text/javascript">     $(function () {         $('.datepicker').datePicker({ inline: true, selectMultiple: true })         .bind(             'dateSelected',             function (e, selectedDate, $td, state) {                                 var dateInMillisecs = selectedDate.valueOf();                 if (state) { //adding a date                     var newDate = new Date(selectedDate);                     //insert the new item into the correct place in the list                     var listitems = $('#dateList').children('li').get();                     var liToAdd = "<li id='" + dateInMillisecs + "' >" + newDate.toString('ddd dd MMM yyyy') + "</li>";                     var targetIndex = -1;                     for (var i = 0; i < listitems.length; i++) {                         if (dateInMillisecs <= listitems[i].id) {                             targetIndex = i;                             break;                         }                     }                     if (targetIndex < 0) {                         $('#dateList').append(liToAdd);                     }                     else {                         $($('#dateList').children("li")[targetIndex]).before(liToAdd);                     }                 }                 else {//removing a date                     $('ul #' + dateInMillisecs).remove();                 }             }         )     }); When a date is selected on the calendar a function is called with a number of parameters passed to it. The ones I am particularly interested in are selectedDate and state. State tells me whether the user has selected or deselected the date passed in the selectedDate parameter. The <ul> that I am using to show the date has an id of dateList and this is what I will be adding and removing <li> items from. To make things a little more logical for the user I decided that the date should be sorted in chronological order, this means that each time a new date is selected it need to be placed in the correct position in the list. One way to do this would be just to append a new <li> to the list and then sort the whole list. However the approach I took was to get an array of all the items in the list var listitems = ('#dateList').children('li').get(); and then check the value of each item in the array against my new date and as soon as I found the case where the new date was less than the current item remember that position in the list as this is where I would insert it later. To make this work easily I decided to store a numeric representation of each date in the list in the id attribute of each <li> element. Fortunately javascript natively stores dates as the number of milliseconds since 1 Jan 1970. var dateInMillisecs = selectedDate.valueOf(); Please note that this is the value of the date in UTC! I always like to store dates in UTC as I learnt a long time ago that it saves a lot of refactoring at a later date... When I convert the dates back to their original back on the server I will need the UTC offset that was used when calculating the dates, this and how to actually serialise the dates and get them posted back will be the subject of another post.

    Read the article

  • Token based Authentication for WCF HTTP/REST Services: Authentication

    - by Your DisplayName here!
    This post shows some of the implementation techniques for adding token and claims based security to HTTP/REST services written with WCF. For the theoretical background, see my previous post. Disclaimer The framework I am using/building here is not the only possible approach to tackle the problem. Based on customer feedback and requirements the code has gone through several iterations to a point where we think it is ready to handle most of the situations. Goals and requirements The framework should be able to handle typical scenarios like username/password based authentication, as well as token based authentication The framework should allow adding new supported token types Should work with WCF web programming model either self-host or IIS hosted Service code can rely on an IClaimsPrincipal on Thread.CurrentPrincipal that describes the client using claims-based identity Implementation overview In WCF the main extensibility point for this kind of security work is the ServiceAuthorizationManager. It gets invoked early enough in the pipeline, has access to the HTTP protocol details of the incoming request and can set Thread.CurrentPrincipal. The job of the SAM is simple: Check the Authorization header of the incoming HTTP request Check if a “registered” token (more on that later) is present If yes, validate the token using a security token handler, create the claims principal (including claims transformation) and set Thread.CurrentPrincipal If no, set an anonymous principal on Thread.CurrentPrincipal. By default, anonymous principals are denied access – so the request ends here with a 401 (more on that later). To wire up the custom authorization manager you need a custom service host – which in turn needs a custom service host factory. The full object model looks like this: Token handling A nice piece of existing WIF infrastructure are security token handlers. Their job is to serialize a received security token into a CLR representation, validate the token and turn the token into claims. The way this works with WS-Security based services is that WIF passes the name/namespace of the incoming token to WIF’s security token handler collection. This in turn finds out which token handler can deal with the token and returns the right instances. For HTTP based services we can do something very similar. The scheme on the Authorization header gives the service a hint how to deal with an incoming token. So the only missing link is a way to associate a token handler (or multiple token handlers) with a scheme and we are (almost) done. WIF already includes token handler for a variety of tokens like username/password or SAML 1.1/2.0. The accompanying sample has a implementation for a Simple Web Token (SWT) token handler, and as soon as JSON Web Token are ready, simply adding a corresponding token handler will add support for this token type, too. All supported schemes/token types are organized in a WebSecurityTokenHandlerCollectionManager and passed into the host factory/host/authorization manager. Adding support for basic authentication against a membership provider would e.g. look like this (in global.asax): var manager = new WebSecurityTokenHandlerCollectionManager(); manager.AddBasicAuthenticationHandler((username, password) => Membership.ValidateUser(username, password));   Adding support for Simple Web Tokens with a scheme of Bearer (the current OAuth2 scheme) requires passing in a issuer, audience and signature verification key: manager.AddSimpleWebTokenHandler(     "Bearer",     "http://identityserver.thinktecture.com/trust/initial",     "https://roadie/webservicesecurity/rest/",     "WFD7i8XRHsrUPEdwSisdHoHy08W3lM16Bk6SCT8ht6A="); In some situations, SAML token may be used as well. The following configures SAML support for a token coming from ADFS2: var registry = new ConfigurationBasedIssuerNameRegistry(); registry.AddTrustedIssuer( "d1 c5 b1 25 97 d0 36 94 65 1c e2 64 fe 48 06 01 35 f7 bd db", "ADFS"); var adfsConfig = new SecurityTokenHandlerConfiguration(); adfsConfig.AudienceRestriction.AllowedAudienceUris.Add( new Uri("https://roadie/webservicesecurity/rest/")); adfsConfig.IssuerNameRegistry = registry; adfsConfig.CertificateValidator = X509CertificateValidator.None; // token decryption (read from config) adfsConfig.ServiceTokenResolver = IdentityModelConfiguration.ServiceConfiguration.CreateAggregateTokenResolver();             manager.AddSaml11SecurityTokenHandler("SAML", adfsConfig);   Transformation The custom authorization manager will also try to invoke a configured claims authentication manager. This means that the standard WIF claims transformation logic can be used here as well. And even better, can be also shared with e.g. a “surrounding” web application. Error handling A WCF error handler takes care of turning “access denied” faults into 401 status codes and a message inspector adds the registered authentication schemes to the outgoing WWW-Authenticate header when a 401 occurs. The next post will conclude with authorization as well as the source code download.   (Wanna learn more about federation, WIF, claims, tokens etc.? Click here.)

    Read the article

  • Oracle Social Network Developer Challenge Winners

    - by kellsey.ruppel
    Originally posted by Jake Kuramoto on The Apps Lab blog. Now that OpenWorld 2012 has wrapped, I have time to tell you all about what happened. Maybe you recall that Noel (@noelportugal) and I were running a modified hackathon during the show, the Oracle Social Network Developer Challenge. Without further ado, congratulations to Dimitri Gielis (@dgielis) and Martin Giffy D’Souza (@martindsouza) on their winning entry, an integration between Oracle APEX and Oracle Social Network that integrates feedback and bug submission with Oracle Social Network Conversations, allowing developers, end-users and project leaders to view and discuss the feedback on their APEX applications from within Oracle Social Network. Update: Bob Rhubart of OTN (@brhubart) interviewed Dimitri and Martin right after their big win. Money quote from Dimitri when asked what he’d buy with the $500 in Amazon gift cards, “Oracle Social Network.” Nice one. In their own words: In the developers perspective it’s important to get feedback soon, so after a first iteration and end-users start to test, they can give feedback of the application. Previously it stopped there, and it was up to the developer to communicate further with email, phone etc. With OSN every feedback and communication gets logged and other people can see the discussion immediately as well. For the end users perspective he can now communicate in a more efficient way to not only the developers, but also between themselves. Maybe many end-users (in different locations) would like to change some behaviour, by using OSN they can see the entry somebody put in with a screenshot and they can just start to chat about it. Some key technical end users can have lighten the tasks of the development team by looking at the feedback first and start to communicate with their peers. For the project manager he has now the ability to really see what communication has taken place in certain areas and can make decisions on that. Later, if things come up again, he can always go back in OSN and see what was said at that moment in time. Integrating OSN in the APEX applications enhances the user experience, makes the lives of the developers easier and gives a better overview to project managers. Incidentally, you may already know Dimitri and Martin, since both are Oracle Ace Directors. I ran into Martin at the Ace Director briefings Friday before the conference started, and at that point, he wasn’t sure he’d have time to enter the Challenge. After some coaxing, he and Dimitri agreed to give it a go and banged out their entry on Tuesday night, or more accurately, very early Wednesday morning, the day of the Challenge judging. I think they said it took them about four hours of hardcore coding to get it done, very much like a traditional hackathon, which is essentially a code sprint from idea to finished product. Here are some screenshots of the workflow they built. #gallery-1 { margin: auto; } #gallery-1 .gallery-item { float: left; margin-top: 10px; text-align: center; width: 33%; } #gallery-1 img { border: 2px solid #cfcfcf; } #gallery-1 .gallery-caption { margin-left: 0; } I love this idea, i.e. closing the loop between web developers and users, a very common pain point, and so did our judges. Speaking of, special thanks to our panel of three judges: Reggie Bradford (@reggiebradford), serial entrepreneur, founder of Vitrue and SVP of Cloud Product Development at Oracle Robert Hipps (@roberthipps), VP of Development for Oracle Social Network and my former boss Roland Smart (@rsmartx), VP of Social Marketing and the brains behind the Oracle Social Developer Community Finally, thanks to everyone who made this possible, including: The three other teams from HarQen (@harqen), TEAM Informatics (@teaminformatics) and Fishbowl Solutions (@fishbowle20) featuring Friend of the ‘Lab John Sim (@jrsim_uix), who finished and presented entries. I’ll be posting the details of their work this week. The one guy who finished an entry, but couldn’t make the judging, Bex Huff (@bex). Bex rallied from a hospitalization due to an allergic reaction during the show; he’s fine, don’t worry. I’ll post details of his work next week, too. The 40-plus people who registered to compete in the Challenge. Noel for all his hard work, sample code, and flying monkey target, more on that to come. The Oracle Social Network development team for supporting this event. Everyone in legal and the beta program office for their help. And finally, the Oracle Technology Network (@oracletechnet) for hosting the event and providing countless hours of operational and moral support. Sorry if I’ve missed some people, since this was a huge team effort. This event was a big success, and we plan to do similar events in the future. Stay tuned to this channel for more. 

    Read the article

  • Driver error when using multiple shaders

    - by Jinxi
    I'm using 3 different shaders: a tessellation shader to use the tessellation feature of DirectX11 :) a regular shader to show how it would look without tessellation and a text shader to display debug-info such as FPS, model count etc. All of these shaders are initialized at the beginning. Using the keyboard, I can switch between the tessellation shader and regular shader to render the scene. Additionally, I also want to be able toggle the display of debug-info using the text shader. Since implementing the tessellation shader the text shader doesn't work anymore. When I activate the DebugText (rendered using the text-shader) my screens go black for a while, and Windows displays the following message: Display Driver stopped responding and has recovered This happens with either of the two shaders used to render the scene. Additionally: I can start the application using the regular shader to render the scene and then switch to the tessellation shader. If I try to switch back to the regular shader I get the same error as with the text shader. What am I doing wrong when switching between shaders? What am I doing wrong when displaying text at the same time? What file can I post to help you help me? :) thx P.S. I already checked if my keyinputs interrupt at the wrong time (during render or so..), but that seems to be ok Testing Procedure Regular Shader without text shader Add text shader to Regular Shader by keyinput (works now, I built the text shader back to only vertex and pixel shader) (somthing with the z buffer is stil wrong...) Remove text shader, then change shader to Tessellation Shader by key input Then if I add the Text Shader or switch back to the Regular Shader Switching/Render Shader Here the code snipet from the Renderer.cpp where I choose the Shader according to the boolean "m_useTessellationShader": if(m_useTessellationShader) { // Render the model using the tesselation shader ecResult = m_ShaderManager->renderTessellationShader(m_D3D->getDeviceContext(), meshes[lod_level]->getIndexCount(), worldMatrix, viewMatrix, projectionMatrix, textures, texturecount, m_Light->getDirection(), m_Light->getAmbientColor(), m_Light->getDiffuseColor(), (D3DXVECTOR3)m_Camera->getPosition(), TESSELLATION_AMOUNT); } else { // todo: loaded model depends on distance to camera // Render the model using the light shader. ecResult = m_ShaderManager->renderShader(m_D3D->getDeviceContext(), meshes[lod_level]->getIndexCount(), lod_level, textures, texturecount, m_Light->getDirection(), m_Light->getAmbientColor(), m_Light->getDiffuseColor(), worldMatrix, viewMatrix, projectionMatrix); } And here the code snipet from the Mesh.cpp where I choose the Typology according to the boolean "useTessellationShader": // RenderBuffers is called from the Render function. The purpose of this function is to set the vertex buffer and index buffer as active on the input assembler in the GPU. Once the GPU has an active vertex buffer it can then use the shader to render that buffer. void Mesh::renderBuffers(ID3D11DeviceContext* deviceContext, bool useTessellationShader) { unsigned int stride; unsigned int offset; // Set vertex buffer stride and offset. stride = sizeof(VertexType); offset = 0; // Set the vertex buffer to active in the input assembler so it can be rendered. deviceContext->IASetVertexBuffers(0, 1, &m_vertexBuffer, &stride, &offset); // Set the index buffer to active in the input assembler so it can be rendered. deviceContext->IASetIndexBuffer(m_indexBuffer, DXGI_FORMAT_R32_UINT, 0); // Check which Shader is used to set the appropriate Topology // Set the type of primitive that should be rendered from this vertex buffer, in this case triangles. if(useTessellationShader) { deviceContext->IASetPrimitiveTopology(D3D11_PRIMITIVE_TOPOLOGY_3_CONTROL_POINT_PATCHLIST); }else{ deviceContext->IASetPrimitiveTopology(D3D11_PRIMITIVE_TOPOLOGY_TRIANGLELIST); } return; } RenderShader Could there be a problem using sometimes only vertex and pixel shader and after switching using vertex, hull, domain and pixel shader? Here a little overview of my architecture: TextClass: uses font.vs and font.ps deviceContext-VSSetShader(m_vertexShader, NULL, 0); deviceContext-PSSetShader(m_pixelShader, NULL, 0); deviceContext-PSSetSamplers(0, 1, &m_sampleState); RegularShader: uses vertex.vs and pixel.ps deviceContext-VSSetShader(m_vertexShader, NULL, 0); deviceContext-PSSetShader(m_pixelShader, NULL, 0); deviceContext-PSSetSamplers(0, 1, &m_sampleState); TessellationShader: uses tessellation.vs, tessellation.hs, tessellation.ds, tessellation.ps deviceContext-VSSetShader(m_vertexShader, NULL, 0); deviceContext-HSSetShader(m_hullShader, NULL, 0); deviceContext-DSSetShader(m_domainShader, NULL, 0); deviceContext-PSSetShader(m_pixelShader, NULL, 0); deviceContext-PSSetSamplers(0, 1, &m_sampleState); ClearState I'd like to switch between 2 shaders and it seems they have different context parameters, right? In clearstate methode it says it resets following params to NULL: I found following in my Direct3D Class: depth-stencil state - m_deviceContext-OMSetDepthStencilState rasterizer state - m_deviceContext-RSSetState(m_rasterState); blend state - m_device-CreateBlendState viewports - m_deviceContext-RSSetViewports(1, &viewport); I found following in every Shader Class: input/output resource slots - deviceContext-PSSetShaderResources shaders - deviceContext-VSSetShader to - deviceContext-PSSetShader input layouts - device-CreateInputLayout sampler state - device-CreateSamplerState These two I didn't understand, where can I find them? predications - ? scissor rectangles - ? Do I need to store them all localy so I can switch between them, because it doesn't feel right to reinitialize the Direct3d and the Shaders by every switch (key input)?!

    Read the article

  • How to Secure a Data Role by Multiple Business Units

    - by Elie Wazen
    In this post we will see how a Role can be data secured by multiple Business Units (BUs).  Separate Data Roles are generally created for each BU if a corresponding data template generates roles on the basis of the BU dimension. The advantage of creating a policy with a rule that includes multiple BUs is that while mapping these roles in HCM Role Provisioning Rules, fewer number of entires need to be made. This could facilitate maintenance for enterprises with a large number of Business Units. Note: The example below applies as well if the securing entity is Inventory Organization. Let us take for example the case of a user provisioned with the "Accounts Payable Manager - Vision Operations" Data Role in Fusion Applications. This user will be able to access Invoices in Vision Operations but will not be able to see Invoices in Vision Germany. Figure 1. A User with a Data Role restricting them to Data from BU: Vision Operations With the role granted above, this is what the user will see when they attempt to select Business Units while searching for AP Invoices. Figure 2.The List Of Values of Business Units is limited to single one. This is the effect of the Data Role granted to that user as can be seen in Figure 1 In order to create a data role that secures by multiple BUs,  we need to start by creating a condition that groups those Business Units we want to include in that data role. This is accomplished by creating a new condition against the BU View .  That Condition will later be used to create a data policy for our newly created Role.  The BU View is a Database resource and  is accessed from APM as seen in the search below Figure 3.Viewing a Database Resource in APM The next step is create a new condition,  in which we define a sql predicate that includes 2 BUs ( The ids below refer to Vision Operations and Vision Germany).  At this point we have simply created a standalone condition.  We have not used this condition yet, and security is therefore not affected. Figure 4. Custom Role that inherits the Purchase Order Overview Duty We are now ready to create our Data Policy.  in APM, we search for our newly Created Role and Navigate to “Find Global Policies”.  we query the Role we want to secure and navigate to view its global policies. Figure 5. The Job Role we plan on securing We can see that the role was not defined with a Data Policy . So will create one that uses the condition we created earlier.   Figure 6. Creating a New Data Policy In the General Information tab, we have to specify the DB Resource that the Security Policy applies to:  In our case this is the BU View Figure 7. Data Policy Definition - Selection of the DB Resource we will secure by In the Rules Tab, we  make the rule applicable to multiple values of the DB Resource we selected in the previous tab.  This is where we associate the condition we created against the BU view to this data policy by entering the Condition name in the Condition field Figure 8. Data Policy Rule The last step of Defining the Data Policy, consists of  explicitly selecting  the Actions that are goverened by this Data Policy.  In this case for example we select the Actions displayed below in the right pane. Once the record is saved , we are ready to use our newly secured Data Role. Figure 9. Data Policy Actions We can now see a new Data Policy associated with our Role.  Figure 10. Role is now secured by a Data Policy We now Assign that new Role to the User.  Of course this does not have to be done in OIM and can be done using a Provisioning Rule in HCM. Figure 11. Role assigned to the User who previously was granted the Vision Ops secured role. Once that user accesses the Invoices Workarea this is what they see: In the image below the LOV of Business Unit returns the two values defined in our data policy namely: Vision Operations and Vision Germany Figure 12. The List Of Values of Business Units now includes the two we included in our data policy. This is the effect of the data role granted to that user as can be seen in Figure 11

    Read the article

  • Backup Your Windows Home Server Off-Site with Asus Webstorage

    - by Mysticgeek
    Windows Home Server lets you backup machines on your network easily. But what about backing up the server data? Today we take a look at ASUS WebStorage for Windows Home Server, which provides you with secure off-site backup for WHS. To use the ASUS WebStorage service you’ll need to sign up for a free account. It offers 1GB of free storage, then you can purchase an unlimited backup package for $39.99 for a year subscription. Note: They also offer online storage for individual PCs as well. Install ASUS WebStorage for WHS Browse to your shared folders on the server and open the Add-Ins folder and copy over the WHSConnectorSetup2.2.4.088.msi file (link below) then close out of the folder. Now launch Windows Home Server Console from one of the computers on your network, click Settings, then Add-ins. Under Available Add-ins click the Available tab and you’ll see the Asus WebStorage installer file we just copied over. Click the Install button. Installation kicks off and when it’s complete, you’ll need to close out of the console and reconnect. Using ASUS WebStorage WHS Connector  When you reconnect to WHS Console, scroll over to the ASUS WebStorage icon and click on Settings. Now log into your ASUS account… Now select the folders you want to backup to the WebStorage service. Select the radio button next to Enable to initialize the backup process… The backup process begins. You can change which folders are backed up simply by disabling the backup process, uncheck the folder(s), then enable the backup again. ASUS WebStorage Site After you have files backed up to the ASUS site, log into your account, and your presented with an overview of the amount of storage you’re using. It also shows what type of files are taking certain amounts of space.   You can browse through your backed up files and folders. It allows you to share and sync backed up data as well. Navigate to the file you want and you can easily download it by clicking on it, or share it out by clicking the share link below it. If you choose to share it, you’re provided with a link to the file to send out to other users.   Conclusion Users of Windows Home Server have been looking for an inexpensive cloud backup solution for quite some time. There are services such as JungleDisk, KeepVault, Wuala…etc. These services probably do a better job, but can start getting expensive once you start uploading a GBs of data. Another disappointment of ASUS WebStorage is you can only backup your WHS shares (from what we’ve been able to determine), it’s an “all or nothing” type of thing. You cannot go in and select individual files and folders. The initial upload speeds can be a bit slow as well, although that might have something to do with limited upload speeds on the DSL connection we used to test it. Retrieving your data from the ASUS site is a breeze though, and all the data files are organized quite well. The WHS Addin is very easy to install and use. If you’re looking for an off-site solution to backup your WHS data, you can test out ASUS WebStorage for free with a 1GB limit. This is good for testing the service and it might be exactly what you’re looking for. Other users may want a more advanced solution like KeepVault or CloudBerry…which is a front end for Amazon S3 storage. Download ASUS WebStorage WHS Addin Other WHS Offsite Backup Solutions CloudBerry, JungleDisk, KeepVault, Wuala Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerGMedia Blog: Setting Up a Windows Home ServerCreate A Windows Home Server Home Computer Restore DiscRemove a Network Computer from Windows Home ServerShare Ubuntu Home Directories using Samba TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow

    Read the article

  • A Semantic Model For Html: TagBuilder and HtmlTags

    - by Ryan Ohs
    In this post I look into the code smell that is HTML literals and show how we can refactor these pesky strings into a friendlier and more maintainable model.   The Problem When I started writing MVC applications, I quickly realized that I built a lot of my HTML inside HtmlHelpers. As I did this, I ended up moving quite a bit of HTML into string literals inside my helper classes. As I wanted to add more attributes (such as classes) to my tags, I needed to keep adding overloads to my helpers. A good example of this end result is the default html helpers that come with the MVC framework. Too many overloads make me crazy! The problem with all these overloads is that they quickly muck up the API and nobody can remember exactly what order the parameters go in. I've seen many presenters (including members of the ASP.NET MVC team!) stumble before realizing that their view wasn't compiling because they needed one more null parameter in the call to Html.ActionLink(). What if instead of writing Html.ActionLink("Edit", "Edit", null, new { @class = "navigation" }) we could do Html.LinkToAction("Edit").Text("Edit").AddClass("navigation") ? Wouldn't that be much easier to remember and understand?  We can do this if we introduce a semantic model for building our HTML.   What is a Semantic Model? According to Martin Folwer, "a semantic model is an in-memory representation, usually an object model, of the same subject that the domain specific language describes." In our case, the model would be a set of classes that know how to render HTML. By using a semantic model we can free ourselves from dealing with strings and instead output the HTML (typically via ToString()) once we've added all the elements and attributes we desire to the model. There are two primary semantic models available in ASP.NET MVC: MVC 2.0's TagBuilder and FubuMVC's HtmlTags.   TagBuilder TagBuilder is the html builder that is available in ASP.NET MVC 2.0. I'm not a huge fan but it gets the job done -- for simple jobs.  Here's an overview of how to use TagBuilder. See my Tips section below for a few comments on that example. The disadvantage of TagBuilder is that unless you wrap it up with our own classes, you still have to write the actual tag name over and over in your code. eg. new TagBuilder("div") instead of new DivTag(). I also think it's method names are a little too long. Why not have AddClass() instead of AddCssClass() or Text() instead of SetInnerText()? What those methods are doing should be pretty obvious even in the short form. I also don't like that it wants to generate an id attribute from your input instead of letting you set it yourself using external conventions. (See GenerateId() and IdAttributeDotReplacement)). Obviously these come from Microsoft's default approach to MVC but may not be optimal for all programmers.   HtmlTags HtmlTags is in my opinion the much better option for generating html in ASP.NET MVC. It was actually written as a part of FubuMVC but is available as a stand alone library. HtmlTags provides a much cleaner syntax for writing HTML. There are classes for most of the major tags and it's trivial to create additional ones by inheriting from HtmlTag. There are also methods on each tag for the common attributes. For instance, FormTag has an Action() method. The SelectTag class allows you to set the default option or first option independent from adding other options. With TagBuilder there isn't even an abstraction for building selects! The project is open source and always improving. I'll hopefully find time to submit some of my own enhancements soon.   Tips 1) It's best not to have insanely overloaded html helpers. Use fluent builders. 2) In html helpers, return the TagBuilder/tag itself (not a string!) so that you can continue to add attributes outside the helper; see my first sample above. 3) Create a static entry point into your builders. I created a static Tags class that gives me access all the HtmlTag classes I need. This way I don't clutter my code with "new" keywords. eg. Tags.Div returns a new DivTag instance. 4) If you find yourself doing something a lot, create an extension method for it. I created a Nest() extension method that reads much more fluently than the AddChildren() method. It also accepts a params array of tags so I can very easily nest many children.   I hope you have found this post helpful. Join me in my war against HTML literals! I’ll have some more samples of how I use HtmlTags in future posts.

    Read the article

  • SUPINFO International University in Mauritius

    Since a while I'm considering to pick up my activities as a student and I'd like to get a degree in Computer Science. Personal motivation I mean after all this years as a professional software (and database) developer I have the personal urge to complete this part of my education. Having various certifications by Microsoft and being awarded as an Microsoft Most Valuable Professional (MVP) twice looks pretty awesome on a resume but having a "proper" degree would just complete my package. During the last couple of years I already got in touch with C-SAC (local business school with degree courses), the University of Mauritius and BCS, the Chartered Institute for IT to check the options to enroll as an experienced software developer. Quite frankly, it was kind of alienating to receive that feedback: Start from scratch! No seriously? Spending x amount of years to sit for courses that might be outdated and form part of your daily routine? Probably being in an awkward situation in which your professional expertise might exceed the lecturers knowledge? I don't know... but if that's path to walk... Well, then I might have to go for it. SUPINFO International University Some weeks ago I was contacted by the General Manager, Education Recruitment and Development of Medine Education Village, Yamal Matabudul, to have a chat on how the local IT scene, namely the Mauritius Software Craftsmanship Community (MSCC), could assist in their plans to promote their upcoming campus. Medine went into partnership with the French-based SUPINFO International University and Mauritius will be the 36th location world-wide for SUPINFO. Actually, the concept of SUPINFO is very likely to the common understanding of an apprenticeship in Germany. Not only does a student enroll into the programme but will also be placed into various internships as part of the curriculum. It's a big advantage in my opinion as the person stays in touch with the daily procedures and workflows in the real world of IT. Statements like "We just received a 'crash course' of information and learned new technology which is equivalent to 1.5 months of lectures at the university" wouldn't form part of the experience of such an education. Open Day at the Medine Education Village Last Saturday, Medine organised their Open Day and it was the official inauguration of the SUPINFO campus in Mauritius. It's now listed on their website, too - but be warned, the site is mainly in French language although the courses are all done in English. Not only was it a big opportunity to "hang out" on the campus of Medine but it was great to see the first professional partners for their internship programme, too. Oh, just for the records, IOS Indian Ocean Software Ltd. will also be among the future employers for SUPINFO students. More about that in an upcoming blog entry. Open Day at Medine Education Village - SUPINFO International University in Mauritius Mr Alick Mouriesse, President of SUPINFO, arrived the previous day and he gave all attendees a great overview of the roots of SUPINFO, the general development of the educational syllabus and their high emphasis on their partnerships with local IT companies in order to assist their students to get future jobs but also feel the heartbeat of technology live. Something which is completely missing in classic institutions of tertiary education in Computer Science. And since I was on tour with my children, as usual during weekends, he also talked about the outlook of having a SUPINFO campus in Mauritius. Apart from the close connection to IT companies and providing internships to students, SUPINFO clearly works on an international level. Meaning students of SUPINFO can move around the globe and can continue their studies seamlessly. For example, you might enroll for your first year in France, then continue to do 2nd and 3rd year in Canada or any other country with a SUPINFO campus to earn your bachelor degree, and then live and study in Mauritius for the next 2 years to achieve a Master degree. Having a chat with Dale Smith, Expand Technologies, after his interesting session on Technological Entrepreneurship - TechPreneur More questions by other craftsmen of the Mauritius Software Craftsmanship Community And of course, this concept works in any direction, giving Mauritian students a huge (!) opportunity to live, study and work abroad. And thanks to this, Medine already announced that there will be new facilities near Cascavelle to provide dormitories and other facilities to international students coming to our island. Awesome! Okay, but why SUPINFO? Well, coming back to my original statement - I'd like to get a degree in Computer Science - SUPINFO has a process called Validation of Acquired Experience (VAE) which is tailor-made for employees in the field of IT, and allows you to enroll in their course programme. I already got in touch with their online support chat but was only redirected to some FAQs on their website, unfortunately. So, during the Open Day I seized the opportunity to have an one-on-one conversation with Alick Mouriesse, and he clearly encouraged me to gather my certifications and working experience. SUPINFO does an individual evaluation prior to their assignment regarding course level, and hopefully my chances of getting some modules ahead of studies are looking better than compared to the other institutes. Don't get me wrong, I don't want to go down the easy route but why should someone sit for "Database 101" or "Principles of OOP" when applying and preaching database normalisation and practicing Clean Code Developer are like flesh and blood? Anyway, I'll be off to get my transcripts of certificates together with my course assignments from the old days at the university. Yes, I studied Applied Chemistry for a couple of years before intersecting into IT and software development particularly... ;-)

    Read the article

  • Great event : Microsoft Visual Studio 2010 Launch @ Microsoft TechEd Blore

    - by sathya
    Great event : Microsoft Visual Studio 2010 Launch @ Microsoft TechEd Blore   I was really excited on attending the day 1 of Microsoft TechEd 2010 in Bangalore. This is the first Teched that am attending. The event was really fun filled with lot of knowledge sharing sessions and lots of goodies and gifts by the partners Initially the Event Started by Murthy's Session. He explained about the Developers relating to the 5 elements of nature (Pancha Boothaas) 1. Fire - Passion 2. Wave (Water) - Catch the right wave which we need to apply. 3. Earth - Connections and lots of opportunities around the world 4. Air -  Its whatever we breathe. Developers.. Without them nothing is possible. they are like the air 5. Sky - Cloud based applications   Next the Keynote and the announcement of Visual Studio by SomaSegar. List of things that he delivered his speech on : 1. Announcement of Visual Studio 2010 2. Announcement of .NET 4.0 3. Announcement of Silverlight later this week 4. What is the current Trend? Microsoft has done a research with many developers across the globe and have got the following feedback from the users. Get Lost (interrupted) - When we do some work and somebody is calling or interrepting by someother way we lose track of what we were doing and we need to do from the start Falling Behind- Technology gets updated  phenomenally over a period of time and developers always have a scenario like they are not in the state of the art technology and they always have a doubt whether they are staying updated. Lack of Collobaration - When a Manager asks a person what the team members have done and some might be done and some might not be and finally all are into a state like we dont know where we are. So they have addressed these 3 points in the VS 2010 by the following features : Get Lost - Some cool features which could overcome this. We have some Graphical interface. which could show what we have done and where we are. Some Zoom features in the code level. Falling Behind - Everything is based on .NET language base. 2010 has been built in such a way that if developers know the native language that's enough for building good applications. Lack of Collobaration - Some Dashboard Features which would show where exactly the project is. And a graphical user interface is shown on clicking which it directly drills down even to the code level. 5. An overview on all new features in VS 2010. 6. Some good demos of new features in VS 2010 by Polita and one more girl. Some of the new features included : 1. Team Explorer 2. Zoom in Code 3. Ribbon Development 4. Development in Single Platform for Windows Phone, XBox, Zune, Azure, Web Based and Windows based applications 5. Sequence Diagram Generation directly from code 6. Dashboards to show project status 7. Javascript and JQuery intellisense 8. Native support for JQuery 9. Packaging feature while deploying. 10. Generation of different versions of web.config like Web.Config.Production, Web.Config.Staging, etc. 11. IntelliTrace - Eliminating the "Not Reproducible" statement. 12. Automated User Interface Testing. At last in the closing of the day we had a great event called Demo Extravaganza, where lot of cool projects that were launched by Microsoft and also the projects that are under research were also shown. I got a lot of info about Bing today. BING really rocks!!! It has the following : 1. Visual Search 2. Product based search. For each product different menu filters were provided to make an advanced search 3. BING Maps was awesome!! It zoomed in to the street level and we can assume that we are the persons who are walking or running on the road and we can see the real objects like buildings moving by our side. 4. PhotoSynth was used in BING to show up all the images taken around the globe in a 3D format. 5. Formula - If we give some formula it automatically gives the value for the variable or derivation of expression Also some info about some kool touch apps which does an authentication and computation of Teched Attendee's Points that they have scored and the sessions attended. One guy won an XBOX in lucky draw as a gift. There were lot of Partner Stalls like Accenture,Intel,Citrix,MicroFocus,Telerik,infragistics,Sapient etc. Some Offers were provided for us like 50% off on Certifications, 1 free Elearning Course, etc. Stay tuned!! Wil update you on other events too..

    Read the article

  • How to create a PeopleCode Application Package/Application Class using PeopleTools Tables

    - by Andreea Vaduva
    This article describes how - in PeopleCode (Release PeopleTools 8.50) - to enable a grid without enabling each static column, using a dynamic Application Class. The goal is to disable the following grid with three columns “Effort Date”, ”Effort Amount” and “Charge Back” , when the Check Box “Finished with task” is selected , without referencing each static column; this PeopleCode could be used dynamically with any grid. If the check box “Finished with task” is cleared, the content of the grid columns is editable (and the buttons “+” and “-“ are available): So, you create an Application Package “CLASS_EXTENSIONS” that contains an Application Class “EWK_ROWSET”. This Application Class is defined with Class extends “ Rowset” and you add two news properties “Enabled” and “Visible”: After creating this Application Class, you use it in two PeopleCode Events : Rowinit and FieldChange : This code is very ‘simple’, you write only one command : ” &ERS2.Enabled = False” → and the entire grid is “Enabled”… and you can use this code with any Grid! So, the complete PeopleCode to create the Application Package is (with explanation in [….]) : ******Package CLASS_EXTENSIONS : [Name of the Package: CLASS_EXTENSIONS] --Beginning of the declaration part------------------------------------------------------------------------------ class EWK_ROWSET extends Rowset; [Definition Class EWK_ROWSET as a subclass of Class Rowset] method EWK_ROWSET(&RS As Rowset); [Constructor is the Method with the same name of the Class] property boolean Visible get set; property boolean Enabled get set; [Definition of the property “Enabled” in read/write] private [Before the word “private”, all the declarations are publics] method SetDisplay(&DisplaySW As boolean, &PropName As string, &ChildSW As boolean); instance boolean &EnSW; instance boolean &VisSW; instance Rowset &NextChildRS; instance Row &NextRow; instance Record &NextRec; instance Field &NextFld; instance integer &RowCnt, &RecCnt, &FldCnt, &ChildRSCnt; instance integer &i, &j, &k; instance CLASS_EXTENSIONS:EWK_ROWSET &ERSChild; [For recursion] Constant &VisibleProperty = "VISIBLE"; Constant &EnabledProperty = "ENABLED"; end-class; --End of the declaration part------------------------------------------------------------------------------ method EWK_ROWSET [The Constructor] /+ &RS as Rowset +/ %Super = &RS; end-method; get Enabled /+ Returns Boolean +/; Return &EnSW; end-get; set Enabled /+ &NewValue as Boolean +/; &EnSW = &NewValue; %This.InsertEnabled=&EnSW; %This.DeleteEnabled=&EnSW; %This.SetDisplay(&EnSW, &EnabledProperty, False); [This method is called when you set this property] end-set; get Visible /+ Returns Boolean +/; Return &VisSW; end-get; set Visible /+ &NewValue as Boolean +/; &VisSW = &NewValue; %This.SetDisplay(&VisSW, &VisibleProperty, False); end-set; method SetDisplay [The most important PeopleCode Method] /+ &DisplaySW as Boolean, +/ /+ &PropName as String, +/ /+ &ChildSW as Boolean +/ [Not used in our example] &RowCnt = %This.ActiveRowCount; &NextRow = %This.GetRow(1); [To know the structure of a line ] &RecCnt = &NextRow.RecordCount; For &i = 1 To &RowCnt [Loop for each Line] &NextRow = %This.GetRow(&i); For &j = 1 To &RecCnt [Loop for each Record] &NextRec = &NextRow.GetRecord(&j); &FldCnt = &NextRec.FieldCount; For &k = 1 To &FldCnt [Loop for each Field/Record] &NextFld = &NextRec.GetField(&k); Evaluate Upper(&PropName) When = &VisibleProperty &NextFld.Visible = &DisplaySW; Break; When = &EnabledProperty; &NextFld.Enabled = &DisplaySW; [Enable each Field/Record] Break; When-Other Error "Invalid display property; Must be either VISIBLE or ENABLED" End-Evaluate; End-For; End-For; If &ChildSW = True Then [If recursion] &ChildRSCnt = &NextRow.ChildCount; For &j = 1 To &ChildRSCnt [Loop for each Rowset child] &NextChildRS = &NextRow.GetRowset(&j); &ERSChild = create CLASS_EXTENSIONS:EWK_ROWSET(&NextChildRS); &ERSChild.SetDisplay(&DisplaySW, &PropName, &ChildSW); [For each Rowset child, call Method SetDisplay with the same parameters used with the Rowset parent] End-For; End-If; End-For; end-method; ******End of the Package CLASS_EXTENSIONS:[Name of the Package: CLASS_EXTENSIONS] About the Author: Pascal Thaler joined Oracle University in 2005 where he is a Senior Instructor. His area of expertise is Oracle Peoplesoft Technology and he delivers the following courses: For Developers: PeopleTools Overview, PeopleTools I &II, Batch Application Engine, Language Oriented Object PeopleCode, Administration Security For Administrators : Server Administration & Installation, Database Upgrade & Data Management Tools For Interface Users: Integration Broker (Web Service)

    Read the article

  • SOA Suite 11g Dynamic Payload Testing with soapUI Free Edition

    - by Greg Mally
    Overview Many web service developers use soapUI for various tests like: smoke test, unit test, and load testing because you can get a free edition that is fairly robust. However, if you need to venture into more complex testing that requires a dynamic payload, then the free edition doesn't necessarily make it easy. This feature does exist in soapUI, but for obvious reasons it is in the Pro version. In this blog I will show you how to use soapUI free edition for dynamic payloads in a simplified example. Hopefully this will open the doors for you to expand into more complex scenarios. The following assumes that you have a working knowledge of soapUI and will not go into concepts like setting up a project etc. For the basics, please review the documentation for soapUI: http://www.soapui.org/Getting-Started/. Additionally, we will be using asynchronous web services and you can review the setup for this in my blog: SOA Suite 11g Asynchronous Testing with soapUI. Features in soapUI Free Edition Relating to this Topic The soapUI test tool provides a very feature rich environment that can do many things provided you are willing to go beyond point and click. For this example, we will be leveraging just a couple features for our dynamic payload example: Test Case Properties Scripting with Groovy Basically, we will be using a property as a global variable and we will manipulate that property using a Groovy script. Setting Up Our Property Properties are available throughout soapUI and here is a snippet from the soapUI website defining the locations: Projects : for handling Project scope values, for example a subscription ID TestSuite : for handling TestSuite scoped values, can be seen as "arguments" to a TestSuite TestCases : for handling TestCase scoped values, can be seen as "arguments" to a TestCase Properties TestStep : for providing local values/state within a TestCase Local TestStep properties : several TestStep types maintain their own list of properties specific to their functionality : DataSource, DataSink, Run TestCase MockServices : for handling MockService scoped values/arguments MockResponses : for handling MockResponse scoped values Global Properties : for handling Global properties, optionally from an external source For our example, we will be defining a custom property in a TestCase called SimpleAsyncPayload. The property can be created in either the Custom Properties tab located at the bottom of the Navigator panel when the TestCase is selected in the Navigator or the Properties label in the TestCase editor: Navigator Panel TestCase Editor You will notice that I set a value of “0” for the custom property. For this simplified example, we will need to retrieve that value and manipulate it prior to making the web service request invocation. In order to accomplish this, we will need to get Groovy ;) Let's Get Groovy We will now add a new Groovy Script step to the TestCase called Manipulate Payload: TestCase Editor > Append Step > Groovy Script Once we have added the Groovy Script step to our TestCase, we can open the Groovy Script editor to add the code to: Get the current value of the property we created called SimpleAsyncPayload. Convert the value of the property to an integer. Increment the value. Store the incremented value back into the TestCase property called SimpleAsyncPayload. The script should look something like the following: Groovy Script Editor – Manipulate Payload At this point we can test the script to see if it is working by simply running the TestCase (left-click on the green triangle in the upper left-hand corner of the TestCase editor). To verify if it ran correctly, we can look at the value of the SimpleAsyncPayload property which should now be 1: TestCase Editor – Run Results All that is left to complete the TestCase is to append another step of type Test Request. The information required to append the request is a name and an operation to invoke. In this example we will use the default name and select the SimpleAsyncBPELProcessBingd -> process as the operation (any other information being requested, simply use the defaults unless you are calling an asynchronous operation then do not add any assertions). We are now in familiar ground with the Test Request editor. Depending upon the type of operation you are invoking (synchronous or asynchronous), please update the request with the necessary information (e.g., callback information for asynchronous operations). We will now tweak the Test Request payload to retrieve the value of the SimpleAsyncPayload property. The soapUI editor makes this very simple: right-click in the payload and navigate to the property (e.g., right-click > Get Data.. > TestCase: [Groovy TestCase] > Property [SimpleAsyncPayload]): Test Request Editor – Insert Property Value Your payload should now look something like the following: Test Request Editor – Inserted Property Value Just like before, we are now ready to run the TestCase. If everything goes as expected we should see a response like the following: Message Viewer – Results of TestCase Run We are now setup to be able to run a stress test where the payload will change for each request. This simple example can be expanded to include multiple payload values, complex calculations in the scripts, or whatever can be done via the soapUI scripting. Hopefully you have found this useful and happy testing to you :)

    Read the article

  • Java2Days 2012 Trip Report

    - by reza_rahman
    Java2Days 2012 was held in beautiful Sofia, Bulgaria on October 25-26. For those of you not familiar with it, this is the third installment of the premier Java conference for the Balkan region. It is an excellent effort by admirable husband and wife team Emo Abadjiev and Iva Abadjieva as well as the rest of the Java2Days team including Yoana Ivanova and Nadia Kostova. Thanks to their hard work, the conference continues to grow vigorously with almost a thousand enthusiastic, bright young people attending this year and no less than three tracks on Java, the Cloud and Mobile. The conference is a true gem in this region of the world and I am very proud to have been a part of it again, along with the other world class speakers the event rightfully attracts. It was my honor to present the first talk of the conference. It was a full-house session on Java EE 7 and 8 titled "JavaEE.Next(): Java EE 7, 8, and Beyond". The talk was primarily along the same lines as Arun Gupta's JavaOne 2012 technical keynote. I covered the changes in JMS 2, the Java API for WebSocket (JSR 356), the Java API for JSON Processing (JSON-P), JAX-RS 2, JCache, JPA 2.1, JTA 1.2, JSF 2.2, Java Batch, Bean Validation 1.1 and the rest of the APIs in Java EE 7. I also briefly talked about the possible contents of Java EE 8. My stretch goal was to gather some feedback on some open issues in the Java EE EG (more on that soon) but I ran out of time in the short format forty-five minute session. The talk was received well and I had some pretty good discussions afterwards. The slides for the talk are here: JavaEE.Next(): Java EE 7, 8, and Beyond from reza_rahman To my delight, the Java2Days folks were very interested in my domain-driven design/Java EE 6 talk (titled "Domain Driven Design with Java EE 6"). I've had this talk in my inventory for a long time now but it always gets overridden by less theoretical talks on APIs, tools, etc. The talk has three parts -- a brief overview of DDD theory, mapping DDD to Java EE and actual running DDD code in Java EE 6/GlassFish. For the demo, I converted the well-known DDD sample application (http://dddsample.sourceforge.net/) written mostly in Spring 2 and Hibernate 2 to Java EE 6. My eventual plan is to make the code available via a top level java.net project. Even despite the broad topic and time constraints, the talk went very well. It was a full house, the Q & A was excellent and one of the other speakers even told me they thought this was the best talk of the conference! The slides for the talk are here: Domain Driven Design with Java EE 6 from Reza Rahman The code examples are available here: https://blogs.oracle.com/reza/resource/dddsample.zip for now, as a simple zip file. Give me a shout if you would like to get it up and running. It was also a great honor to present the last session of the conference. It was a talk on the Java API for WebSocket/JSR 356 titled "Building HTML5/WebSocket Applications with JSR 356 and GlassFish". The talk is based on Danny Coward's JavaOne 2012 talk. The talk covers the basic of WebSocket, the JSR 356 API and a simple demo using Tyrus/GlassFish. The talk went very well and there were some very good questions afterwards. The slides for the talk are here: Building HTML5/WebSocket Applications with GlassFish and JSR 356 from Reza Rahman The code samples are available here: https://blogs.oracle.com/arungupta/resource/totd183-HelloWebSocket.zip. You'll need the latest promoted GlassFish 4 build to run the code. Give me a shout if you need help. Besides presenting my talks, I got to attend some great sessions on OSGi, HTML5, cloud, agile and Java 8. I got an invite to speak at the Macedonia JUG when possible. Victor Grazi of InfoQ wrote about my sessions and Java2Days here: http://www.infoq.com/news/2012/11/Java2DaysConference. Stoyan Rachev was very kind to blog about my sessions here: http://www.stoyanr.com/2012/11/java2days-2012-java-ee.html. I definitely enjoyed Java2Days 2012 and hope to be part of the conference next year!

    Read the article

  • Interview with Geoff Bones, developer on SQL Storage Compress

    - by red(at)work
    How did you come to be working at Red Gate? I've been working at Red Gate for nine months; before that I had been at a multinational engineering company. A number of my colleagues had left to work at Red Gate and spoke very highly of it, but I was happy in my role and thought, 'It can't be that great there, surely? They'll be back!' Then one day I visited to catch up them over lunch in the Red Gate canteen. I was so impressed with what I found there, that, three days later, I'd applied for a role as a developer. And how did you get into software development? My first job out of university was working as a systems programmer on IBM mainframes. This was quite a while ago: there was a lot of assembler and loading programs from tape drives and that kind of stuff. I learned a lot about how computers work, and this stood me in good stead when I moved over the development in the 90s. What's the best thing about working as a developer at Red Gate? Where should I start? One of the great things as a developer at Red Gate is the useful feedback and close contact we have with the people who use our products, either directly at trade shows and other events or through information coming through the product managers. The company's whole ethos is built around assisting the user, and this is in big contrast to my previous development roles. We aim to produce tools that people really want to use, that they enjoy using, and, as a developer, this is a great thing to aim for and a great feeling when we get it right. At Red Gate we also try to cut out the things that distract and stop us doing our jobs. As a developer, this means that I can focus on the code and the product I'm working on, knowing that others are doing a first-class job of making sure that the builds are running smoothly and that I'm getting great feedback from the testers. We keep our process light and effective, as we want to produce great software more than we want to produce great audit trails. Tell us a bit about the products you are currently working on. You mean HyperBac? First let me explain a bit about what HyperBac is. At heart it's a compression and encryption technology, but with a few added features that open up a wealth of really exciting possibilities. Right now we have the HyperBac technology in just three products: SQL HyperBac, SQL Virtual Restore and SQL Storage Compress, but we're only starting to develop what it can do. My personal favourite is SQL Virtual Restore; for example, I love the way you can use it to run independent test databases that are all backed by a single compressed backup. I don't think the market yet realises the kind of things you do once you are using these products. On the other hand, the benefits of SQL Storage Compress are straightforward: run your databases but use only 20% of the disk space. Databases are getting larger and larger, and, as they do, so does your ROI. What's a typical day for you? My days are pretty varied. We have our daily team stand-up meeting and then sometimes I will work alone on a current issue, or I'll be pair programming with one of my colleagues. From time to time we give half a day up to future planning with the team, when we look at the long and short term aims for the product and working out the development priorities. I also get to go to conferences and events, which is unusual for a development role and gives me the chance to meet and talk to our customers directly. Have you noticed anything different about developing tools for DBAs rather than other IT kinds of user? It seems to me that DBAs are quite independent minded; they know exactly what the problem they are facing is, and often have a solution in mind before they begin to look for what's on the market. This means that they're likely to cherry-pick tools from a range of vendors, picking the ones that are the best fit for them and that disrupt their environments the least. When I've met with DBAs, I've often been very impressed at their ability to summarise their set up, the issues, the obstacles they face when implementing a tool and their plans for their environment. It's easier to develop products for this audience as they give such a detailed overview of their needs, and I feel I understand their problems.

    Read the article

  • The Oracle Graduate Experience...A Graduates Perspective by Angelie Tierney

    - by david.talamelli
    [Note: Angelie has just recently joined Oracle in Australia in our 2011 Graduate Program. Last week I shared my thoughts on our 2011 Graduate Program, this week Angelie took some time to share her thoughts of our Graduate Program. The notes below are Angelie's overview from her experience with us starting with our first contact last year - David Talamelli] How does the 1 year program work? It consists of 3 weeks of training, followed by 2 rotations in 2 different Lines of Business (LoB's). The first rotation goes for 4 months, while your 2nd rotation goes for 7, when you are placed into your final LoB for the program. The interview process: After sorting through the many advertised graduate jobs, submitting so many resumes and studying at the same time, it can all be pretty stressful. Then there is the interview process. David called me on a Sunday afternoon and I spoke to him for about 30 minutes in a mini sort of phone interview. I was worried that working at Oracle would require extensive technical experience, but David stressed that even the less technical, and more business-minded person could, and did, work at Oracle. I was then asked if I would like to attend a group interview in the next weeks, to which I said of course! The first interview was a day long, consisting of a brief introduction, a group interview where we worked on a business plan with a group of other potential graduates and were marked by 3 Oracle employees, on our ability to work together and presentation. After lunch, we then had a short individual interview each, and that was the end of the first round. I received a call a few weeks later, and was asked to come into a second interview, at which I also jumped at the opportunity. This was an interview based purely on your individual abilities and would help to determine which Line of Business you would go to, should you land a graduate position. So how did I cope throughout the interview stages? I believe the best tool to prepare for the interview, was to research Oracle and its culture and to see if I thought I could fit into that. I personally found out about Oracle, its partners as well as competitors and along the way, even found out about their part (or Larry Ellison's specifically) in the Iron Man 2 movie. Armed with some Oracle information and lots of enthusiasm, I approached the Oracle Graduate Interview process. Why did I apply for an Oracle graduate position? I studied a Bachelor of Business/Bachelor of Science in IT, and wanted to be able to use both my degrees, while have the ability to work internationally in the future. Coming straight from university, I wasn't sure exactly what I wanted to do in terms of my career. With the program, you are rotated across various lines of business, to not only expose you to different parts of the business, but to also help you to figure out what you want to achieve out of your career. As a result, I thought Oracle was the perfect fit. So what can an Oracle ANZ Graduate expect? First things first, you can expect to line up for your visitor pass. Really. Next you enter a room full of unknown faces, graduates just like you, and then you realise you're in this with 18 other people, going through the same thing as you. 3 weeks later you leave with many memories, colleagues you can call your friends, and a video of your presentation. Vanessa, the Graduate Manager, will also take lots of photos and keep you (well) fed. Well that's not all you leave with, you are also equipped with a wealth of knowledge and contacts within Oracle, both that will help you throughout your career there. What training is involved? We started our Oracle experience with 3 weeks of training, consisting of employee orientation, extensive product training, presentations on the various lines of business (LoB's), followed by sales and presentation training. While there was potential for an information overload, maybe even death by Powerpoint, we were able to have access to the presentations for future reference, which was very helpful. This period also allowed us to start networking, not only with the graduates, but with the managers who presented to us, as well as through the monthly chinwag, HR celebrations and even with the sharing of tea facilities. We also had a team bonding day when we recorded a "commercial" within groups, and learned how to play an Irish drum. Overall, the training period helped us to learn about Oracle, as well as ourselves, and to prepare us for our transition into our rotations. Where to now? I'm now into my 2nd week of my first graduate rotation. It has been exciting to finally get out into the work environment and utilise that knowledge we gained from training. My manager has been a great mentor, extremely knowledgeable, and it has been good being able to participate in meetings, conference calls and make a contribution towards the business. And while we aren't necessarily working directly with the other graduates, they are still reachable via email, Pidgin and lunch and they are important as a resource and support, after all, they are going through a similar experience to you. While it is only the beginning, there is a lot more to learn and a lot more to experience along the way, especially because, as we learned during training, at Oracle, the only constant is change.

    Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >