Search Results

Search found 2177 results on 88 pages for 'wifi'.

Page 64/88 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

• Dual WAN port on a WRT54GL

  - by pufferfish

  Is it possible to reconfigure one of the LAN ports on a WRT54GL (running Tomato firmware) to act as a second WAN port? I have the following networks: PPOE connection to ADSL modem (works fine on the normal WAN port) WiFi neighbourhood network (in 178.X.X.X range), via a Mikrotik routerboard which I'd like to put on the WAN side of the router. I'd then like to set up routing so than some traffic (172.X.X.X) is routed to the Mikrotik and the rest to the ADSL modem. p.s. for practical reasons, I can't use the Mikrotik as the firewall/router. Edit: It seems this can be done by editing iptables, can someone tell me exactly how?

  Read the article

• wi-fi connection drops periodically for a few seconds

  - by sergiom

  I've read the similar question on wireless connections dropping, but no answer seems to apply to my case I have configured the wi-fi lan of my router to broadcast sid and use WPA-PSK. Every few minutes my wi-fi connection drops for a few seconds and then restores. When I use two computers and run a ping -n 50000 on both computers, I see that the connection drops at different times but with almost the same rate. the router is a zyxel, one pc runs windws vista and uses a USB wi-fi device from Belkin: F6D4050 the other one runs windows 7 is a Dell PC with an Intel(R) WiFi Link 5100 AGN there are no other wi-fi lans around

  Read the article

• Metro Apps on Win 8 aren't working with static ip behind auth proxy

  - by Kamal

  In Windows 8 Professional, Metro Apps and Windows Update do not work on static IP settings behind authenticated proxy server. They work on DHCP on the same proxy settings. (We have DHCP for wifi and static IP for LAN, both using the same proxy server). IE, Chrome and other desktop apps work nicely on both. Metro apps worked on an auth proxy (DHCP only), when I changed their proxy settings from the 'edit group policy' option. (StartSettingsEdit Group PolicyComputer ConfigurationAdministrative TemplatesNetwork IsolationInternet Proxy for Apps) Can this be fixed?

  Read the article

• Why is my ipad's wireless so flakey?

  - by Mark

  I'm the proud owner of a new IPad here in the UK. All is good, except for the wifi, which is a bit flakey. It connects fine to my Draytek router which is set for WPA/WPA2 and 56g only, displaying full signal strength. Then, after a few minutes, it goes down to minimum strength... And sometimes it goes back up again. A few times, it seems to loose connection completely, and needs to be turned off and on again. I've looked at the Apple support site, and have tried their recommendations (which are not really very relevant), but still nothing. I've tried setting the router to wpa2 only, and setting long-preamble. Right now, I guess I want to know if it's a hardware problem with my device and should be returned, or if it's a problem with all ipads which will be resolved. Guess I could take it back to the Mac genius bar, but I find those guys so incredibly pretentious and, frankly, rather useless, that i'd rather wait until I've exercised other options!

  Read the article

• Wireless Network Connection gets dropped at times under Windows 7

  - by n179911

  I have running Windows 7 on my hp laptop with 802.11n wifi adapter. Some times, I lost wireless internet connection. Under the 'Wireless Connection' when I click the notification area, it said 'my home network is 'connected'... But in the header 'currently Connected to' it said 'no internet access' instead of 'internet access' I can 'fix' my problem by going to the 'wireless connection' my home network, click 'disconnect' and then click 'connect'. And when it comes back up, it gets connected again. any idea how can i fix this problem? Thank you.

  Read the article

• Good, secure video chat program

  - by wag2639

  I'm looking for something similar to skype but basically just for me to video chat with my girlfriend. Skype has been kind of buggy lately with its recent iterations and doesn't seem to be progressing as much as when it was with its previous backers. Are there any good, secure video chat programs? Something that customizable and lets you choose framerate vs pixelation and is generally secure (I don't care if the NSA can tap it but no one else, especially over unencrypted wifi's). Open source is preferred but not required. Free or really really cheap is practically required. Also, since this is point to point, an i am a power user (and my gf as well), it can involve some manual setup to establish a point-to-point link. Any suggestions, Thanks.

  Read the article

• IP Camera working on lan but not on internet

  - by Kevin Boyd

  My IP cam model is Genius 350TR, I tested the cam at home on lan and internet and it worked. Then I shifted it to an office. It works on the office lan setup but I cannot connect to the ip cam from home. The IP cam is configured for port 192.168.0.30:7070 and it has a port forwarded to publicIP:7071 When I telnet to that public IP it connects to that port. However when I try to access the ip cam from a web browser it only shows me the configuration page and settings and the video is blank and it says connecting for some time and then says disconnected. The cam is configured for HTTP on internet and UDP on Lan. The office setup is ISP --- WifiRouter --- PC With Wifi card --- Switch --- IP CAM Is there a way to debug this problem?

  Read the article

• MAC address stealing?

  - by Arnis L.

  Recently my i-connection started to get laggy. Sometimes it disappears completely. ISP told me that someone steals my internet. Someone has managed to sniff my MAC address, kick me out and surf web in my place. So... I'm curious - how it's possible to steal MAC address and what makes that mystical thief to be more privileged that when he uses i-net I lose mine? Or my ISP just lies to me? P.s. It's not wifi.

  Read the article

• Spoof user agent for GoGo Inflight Internet?

  - by AndyL

  Is it possible to trick the GoGo Inflight WiFi on airlines into thinking that you have a mobile device instead of a laptop? It seems like most airlines that offer in flight wireless these days use GoGo. They offer different pricing for mobile and laptops. It seems like they are checking the browser's user agent. Out of curiosity, is it possible to use a Firefox extension like this one to spoof the user-agent and allow a laptop to access the internet under a GoGo mobile plan? How would GoGo handle something like an IMAP email client, like Thunderbird. Do IMAP clients have a user-agent field as well that would normally identify whether the mail client is running on a laptop or mobile device?

  Read the article

• Resolve Wrong IP from Domain Name only on certain networks

  - by Godric Seer

  I host a personal website on an old desktop that is LAMP based. There are several strange things about this problem so I will break it down into steps. Since I have a dynamic IP, I use no-ip to make sure I have a working domain name at all times. I use the automatic update client, but logged in and checked and my no-ip domain has the proper IP tied to it. Here is a link to the homepage through the no-ip domain for reference. Also, I do a ping and a traceroute on the no-ip domain and get: [eckertzs@localhost ~]$ ping -c 1 endradil.noip.me PING endradil.noip.me (65.24.215.99) 56(84) bytes of data. 64 bytes from endradil.noip.me (65.24.215.99): icmp_seq=1 ttl=64 time=2.23 ms --- endradil.noip.me ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 104ms rtt min/avg/max/mdev = 2.233/2.233/2.233/0.000 ms [eckertzs@localhost ~]$ traceroute endradil.noip.me traceroute to endradil.noip.me (65.24.215.99), 30 hops max, 60 byte packets 1 . (192.168.2.1) 1.755 ms 5.409 ms 5.380 ms 2 endradil.noip.me (65.24.215.99) 6.297 ms 9.543 ms 10.324 ms Using this domain, I can connect to my webserver without issue or interruption(the https is required to avoid a redirect serverside, but it works). I also have a domain I have bought on GoDaddy where I have a CNAME record forwarding the www subdomain to my no-ip domain. CNAME Record Host: www Points to: endradil.noip.me TTL: 1 hour For the past several weeks, I never had an issue using the GoDaddy domain to connect (ssh or https). As of the past few days, however, the GoDaddy domain has only worked intermittently, for a few minutes at a time and then will go down for hours at a time. I get server not found errors most of the time. Also, if I happen to be using the GoDaddy domain for an ssh connection, the connection will freeze. I have run online tests of the DNS and have seen that the website is visible by external servers and resolved to the correct IP. I also contacted GoDaddy support but they had no issues connecting to the website, and therefore did not see any issues. My personal computers (Windows desktop, linux laptop, android phone) all fail to connect when on my personal wifi. If I disconnect my phone from the wifi and use my AT&T wireless data, it can connect with both domains without issue. When I attempt to use Google webmaster tools to crawl the site using the GoDaddy domain, Google can not find the site. From my linux laptop, I have found some interesting results when I ping or traceroute the domain. The results from these: [eckertzs@localhost ~]$ ping -c 1 www.endradil.com PING www.endradil.com.Belkin (198.105.244.228) 56(84) bytes of data. --- www.endradil.com.Belkin ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 10000ms [eckertzs@localhost ~]$ traceroute www.endradil.com traceroute to www.endradil.com (198.105.244.228), 30 hops max, 60 byte packets 1 . (192.168.2.1) 1.918 ms 2.806 ms 2.772 ms 2 cpe-65-24-208-1.insight.res.rr.com (65.24.208.1) 29.247 ms 29.654 ms 30.094 ms 3 cpe-69-23-24-117.new.res.rr.com (69.23.24.117) 15.597 ms 23.218 ms 23.581 ms 4 agg24.clmcohib01r.midwest.rr.com (65.29.1.52) 30.581 ms 30.556 ms 31.192 ms 5 be27.clevohek01r.midwest.rr.com (65.29.1.38) 30.580 ms 31.062 ms 31.038 ms 6 bu-ether25.atlngamq47w-bcr01.tbone.rr.com (107.14.19.38) 37.863 ms 68.844 ms 43.773 ms 7 107.14.17.178 (107.14.17.178) 51.866 ms 51.019 ms 50.989 ms 8 ae0.pr1.dca10.tbone.rr.com (107.14.17.200) 48.467 ms ae-4-0.a0.lax91.tbone.rr.com (66.109.1.113) 49.912 ms * 9 v413.core1.ash1.he.net (209.51.175.33) 60.270 ms 50.842 ms 50.819 ms 10 100ge5-1.core1.nyc4.he.net (184.105.223.166) 55.597 ms 56.045 ms 56.020 ms 11 xerocole-inc.10gigabitethernet12-4.core1.nyc4.he.net (216.66.41.242) 56.001 ms 55.969 ms 55.992 ms 12 * * * both show the incorrect IP. Also, the traceroute timesout on hops 12 through 255 (output truncated above). The traceroute using site24x7 works and shows reasonable results when run from their california server. From another linux box on a different network but in the same city as me (10 miles away), I still get timeout for traceroute, however the IP resolves correctly for the domain. From this I believe that the DNS result is incorrectly cached in either my router/modem or perhaps even at my ISP level. My question is, first, how do I find out exactly what is wrong, and second, how do I resolve it.

  Read the article

• CheckPoint VPN-1 SecureClient inability to navigate behind a Linksys WAG300N

  - by user46819

  I have a Linksys WAG300N, I'm accessing my LAN with Wifi and everything works fine on my Windows 7 Enterprise laptop. When I try to connect to my company's VPN the connection succeeds, but I cannot access any internet site either within my work network or public site like Yahoo or Google. In my Linksys control panel I already verified all types of VPNs are enable to passthrough. Normal IPSec and Windows VPN worked in the past without any problems. CheckPoint seems to have a solution, but I do not have the ability to change the IP in my client and of course using another NAT device in between is not a solution for me. Edit: adding link to the Checkpoint solution, https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk26189

  Read the article

• OSX Parallels 5 - can't share internet connection when using host-only networking...

  - by Steve Kirtley

  I've just upgraded from Parallels 3 to Parallels 5, but am having a problem matching my previous configuration. I am a web developer so run a local web server on my mac. I used to allow access to this from the virtual machines in Parallels by using 'Host-Only Networking' and then in OSX enabling internet sharing from my wifi/ethernet to the virtual ethernet ports that Parallels created. The setup was based on: http://www.craigfrancis.co.uk/features/setup/parallels/ The new version of Parallels doesn't create any network adaptors that are available for internet sharing in OSX - just VNIC's which only show under an ifconfig... Can anyone suggest how to make this all play nice? Thanks in advance! Steve

  Read the article

• MBP Bluetooth PAN connection with iPhone 4

  - by Chetan Sachdev

  I am trying to share MBP(OSX 10.8.3) internet connection with iPhone 4 (iOS 6) using Bluetooth PAN(Personal Area Network). Problem is Bluetooth PAN is not getting an ip address. I have tried to renew DHCP lease but nothing works. When I give a Manual IP address, the Bluetooth PAN goes green but doesn't shows the connection in iPhone. Is it possible to share the internet connection via Bluetooth. Note: I don't want to create an Ad-hoc connection over wifi.

  Read the article

• OpenWrt Backfire 10.03 Frequently Becoming Unresponsive (Bridged Client)

  - by Christopher Parker

  I have a Linksys WRT54G version 2 that I've flashed with OpenWrt Backfire 10.03. It's acting as a bridged client using the wl.o driver to give me network access in my home office, which is in a far corner of my house in a position that would make it exceedingly difficult to fish network cabling in through the walls. I have three network-ready devices attached to the device that don't currently support WiFi, including a networked printer. Ever since I migrated from WhiteRussian, which was also set up as a bridged client, to Backfire, the device has been becoming unresponsive, as though the OS itself has crashed or frozen. The WLAN light becomes completely solid and the LAN lights stay mostly solid, blipping off and then back on again maybe once a second or so. They all blink more or less in unison. Is there some way I can diagnose why this is happening so I can fix it? Right now, the only way to fix it is to unplug the device and plug it back in.

  Read the article

• Running rsync on network connect

  - by user40495

  I have one mac which is always on and is my main computer. I also have a MacBook and I'm trying to Sync my iphoto library. So I can successfully use rsync to sync files. I'm using a cron to have it run once a day. In reality the macbook isn't always on, so I'm looking for a way to run rsync when ever the two computers are connected on the same wifi network. So I'm guessing the best place is to somehow run rsync when the airport is connected. Whats the best way

  Read the article

• Running rsync on network connect

  I have one mac which is always on and is my main computer. I also have a MacBook and I'm trying to Sync my iphoto library. So I can successfully use rsync to sync files. I'm using a cron to have it run once a day. In reality the macbook isn't always on, so I'm looking for a way to run rsync when ever the two computers are connected on the same wifi network. So I'm guessing the best place is to somehow run rsync when the airport is connected. Whats the best way

  Read the article

• setting up an access point from laptop to provide internet

  - by Avo

  i am trying to connect my wireless router as an access point from my laptop. the scenario is as follows: i have a wireless broadband connection at home, which i connect to using a username and a password. this username and password is unique, and can be used by one computer at a time!.. my sister and i can't have internet both at the same time! so im trying to connect my wireless router to my laptop with a physical cable so that i can provide internet via WiFi... first off, is this possible?!.. if not, what are my options? if it is possible, how do i set it up? a link to the appropriate steps would do as well, but i need it :(... thank you in advance, /av

  Read the article

• Using a MiFi via WDS

  - by Joril

  I have a Huawei R201 MiFi connected to the internet, and I'd like to use its internet connection even from devices that don't have WiFi, so I grabbed a wireless router I had lying around and configured WDS so that it'd connect to the MiFi, and this is working nicely (I can ping the MiFi from the router web interface). The next step was connecting my PC to the router via ethernet cable, but now I'm stuck... The PC can ping the router, but not the MiFi (they're all on the same subnet). Since the router can ping the MiFi, I guess this is some kind of routing issue? Should I get a more "flexible" router, such as one with DD-WRT maybe? Is what I'm trying to do even possible? (For the record the PC is running Lubuntu 11.10)

  Read the article

• Windows 7 Utlimate x64 - No Internet access

  - by rafek

  I've just installed Windows 7 Ultimate x64. As all of my computers at home I've connected to my router via wifi (open/wep). And what has happened is that Wireless Connection is Connected but with No Internet access -- my ipconfig says: Autoconfiguration IPv4 Address : 169.254.33.161 Subnet Mask : 255.255.0.0 Default Gatewawy : (empty) After ipconfig /renew I get: An error occurred while renewing interface Wireless Network Connection : unable to contact your DHCP server. Request has timed out. [..] I'm looking for a solution for 2 hours now...

  Read the article

• A list of 'best practices' for extending the life between charges of a notebook battery.

  - by Tim Visher

  Hello Everyone, I'd like to compile a list of best practices for getting the most out of a single charge of a typical notebook battery (be it Li-Ion or Li-Poly). Sources would be great as well. I've heard, for instance, that the best things to do to improve battery performance (not the total lifetime of the battery, just single charge performance) are, in descending order of effectiveness: Turn your display all the way down. Turn off WiFi Turn off Bluetooth Spin down disks when they're not in use. etc… I'd like to get sources together for these and other tips for extending life-between-charge for any battery on any notebook (as these really are all about Demand Management rather than Life lime extension. Thanks!

  Read the article

• D-Link DWA-125 constantly disconnecting in winXP, but works fine on ubuntu..

  - by sil3nt

  Hey there, I'm dual booting winXp and ubuntu 10.10. I'm using a DWA-125 usb adapter to connect to my home wifi connection and I'm having this odd issue. First off, in ubuntu the adapter works fine and I have no trouble at all, but when I boot back in XP I get a dlink connetion wizard and the connection times out after every 2 minutes. It's odd because I can actually load up web pages and use the internet for 2 minutes, and then it would disconnect and the whole thing would repeat. I did a system restore on xp and this stopped the whole connect-disconnect thing but once I booted into ubuntu and came back to xp it started all over again!(?). Any ideas as to how I would go about fixing this?

  Read the article

• Create access point (uap0) on debian 7(arm) - not found?

  - by ethrbunny

  I'm working with a fanless PC that has an ARM chipset, 2 eth plugs and a wifi card (among other things). If I install debian 6 on it all three network interfaces are available at boot time. Today I tried to install debian 7 and had numerous errors indicating that the wireless card isn't supported. uap0: error fetching interface information: Device not found SIOCSIFADDR: No such device uap0: ERROR while getting interface flags: No such device uap0: ERROR while getting interface flags: No such device No such device ERR:UAPHOSTCMD is not supported by uap0 ERR:Command sending failed! No such device ERR:UAPHOSTCMD is not supported by uap0 ERR:Command sending failed! I've tried comparing the kernel module list to the working system but there are too many other differences to make something obvious enough (to me) stand out. How would I get started debugging this problem?

  Read the article

• Can't connect Alienware M11x wireless to internet thru families router

  - by Jim Kron

  Morning All, Have an Alienware M11x loaded with Win 7 Premium with the Dell half card wifi. Also have a Netgear and Belkin USB external adapters (b/g and N to include dual radios. No joy either. Families Internet is served thru Charter and they use a Motorola Router. No matter if we reset the router, I cannot connect to the Net but can talk to the router. BTW... my brother only uses WEP as a number of connected items are old and my folks are not in a high threat area for attacks. Frustrated, as I know what I'm doing but this really has me stumped. Any thoughts? Much appreciated, Jim

  Read the article

• Cannot delete podcast from iPod Touch

  - by rybl

  I am having a problem with my iPod/iTunes where an episode of a single podcast cannot be deleted. The episode in question does not show up in iTunes or as being on the iPod when I drill down and look at the podcasts on the iPod in iTunes. It also does not play if I try to play it on the iPod; it just waits a second and skips to the next podcast. I have iTunes 9.2.0.61, my iPod has OS version 4 (although I was having this problem before I upgraded), and Windows 7 64bit. I would really prefer a solution that does not require me to completely wipe the iPod because I have a bunch of WiFi keys stored that I don't want to have to dig up again.

  Read the article

• Facebook doesn't work on computer, but work on mobile device, both use the same router

  - by sasa

  I have a very strange problem and I'm thinking that can be problem with dns or something similar, but not sure and don't know how to solve. My computer is connected to router and every site works fine except facebook (Chrome and Firefox). Chrome shows "Error 101 (net::ERR_CONNECTION_RESET): The connection was reset." But, on mobile device witch is connected to the same router facebook works fine (Fb application and Delphin browser). Pinging facebook works fine. Clearing cookies and cache didn't help. Also, I performed antivirus and antimalware scan and there is nothing. What can be a problem? Update: I'm also connect notebook on that wifi router, and on it works fine. nslookup facebook.com Server: UnKnown Address: 192.168.1.1 Non-authoritative answer: Name: facebook.com Addresses: 2a03:2880:2110:3f01:face:b00c:: 2a03:2880:10:1f02:face:b00c:0:25 2a03:2880:10:8f01:face:b00c:0:25 69.171.224.37 69.171.229.11 69.171.242.11 66.220.149.11 66.220.158.11

  Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >