Search Results

Search found 57301 results on 2293 pages for 'windows 7 taskbar'.

Page 64/2293 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

• Java 7 update 6 installation fails on Windows 7 when Chrome is default browser

  - by ali1234

  I am configuring a brand new Lenovo U410 system with Windows 7 Home Premium for a user. I received the system direct from the shop. As part of the configuration I installed Java using the online installer. This worked correctly. Later, due to a mistake I made, I needed to restore the system to factory default. The factory default FORMATS C:\ and puts back (supposedly) the exact factory configuration. However, after doing this, I was no longer able to install Java successfully using the same method I used before. Now, whenever I attempt to use the online Java installer, the following happens. First of all, a window always appears "Welcome to Java", "Downloading Java Installer...". After short time this window disappears and then one of three things happens: The very first time I do this after doing a factory reset, I get a Windows error report, which contains this information: Application Name: JavaSetup7u5.exe Application Version: 7.0.50.6 Application Timestamp: 4feacd84 Fault Module Name: JavaIC.dll Fault Module Version: 9.9.9.9 Fault Module Timestamp: 4f2343d6 Exception Offset: 000052cb Exception Code: c0000417 Exception Data: 00000000 OS Version: 6.1.7600.2.0.0.768.3 Locale ID: 1033 Additional Information 1: 773c Additional Information 2: 773cd78cf06816f8246f359fa270f3bb Additional Information 3: f51a Additional Information 4: f51aaea7d22f36fa9e3a626b5a5cd1c3 2. Subsequent runs produce either this error message: "Error: Java(TM) installer - Downloaded file C:\Users\\AppData\Local\Temp\fx-runtime.exe is corrupt." or Nothing happens at all. I Believe this is a red herring. Running the installer again causes a different error because the files were downloaded and the installer crashed before it could clean up. This isn't the actual problem, as when this happens the installer deletes the downloaded files, and then when you run it for the third time, it downloads everything again and does the javaic.dll crash. I suspect the downloader is appending to the existing files or something, causing the corruption. I have tried all of the above as Administrator and as a normal user. I have tried reseting the system to factory defaults several times. I have tried downloading with Chrome and Internet Explorer 9. I have tried uninstalling all anti-virus software and disabling the windows firewall entirely. The only thing which makes a difference is running the installer in Windows XP compatibility mode, which allows the installation to complete. I know I can workaround this error by using the offline installer so please don't post that as an answer. I am looking for an explanation of the root cause. Additionally, if I use the offline installer, the updater does not work. The updater also does not work if I install in XP mode. The updater fails because it works by just downloading the newest online setup and running it. Also remember that the installers are digitally signed. The signitures verify correctly so there is no way in hell that this is caused by corrupted downloads. Some theories I have: The Java setup files on java.com actually changed in between the first successful install and my later attempts. Seems unlikely as none of the version numbers have changed. However, I have seen a couple of reports of this error which showed up in the past 24 hours. This looks like the most likely explanation right now: http://www.oracle.com/us/corporate/press/1735645 - Oracle released 7 update 6 two days ago. Careful inspection of the installers reveal that they are in fact attempting to download .6, not .5 as the download page claims. Not actually correct. Only the update tool tries to install 7u6. The online installer still tries 7u5. However, 7u6 being released two days ago is too much of a coincidence to ignore. Update: The 7u6 online installer is available from Oracle technetwork. It crashes in exactly the same way. The factory reset software uses GMT-8 and I am on GMT-1. As a result, after factory reset, any software which cares to check would think that the system was restored 7 hours in the future, due to Window's awful policy of storing local time in the system clock. This could be confusing a certificate check or similar. Update: I discovered that this does cause Windows Update to fail. The workaround, setting the clock back before starting factory reset, does not enable Java to install correctly. The factory reset image isn't really the same as what is installed in the main partition when you buy the system. Naughty Lenovo. The installer appears to crash while installing or displaying something to do with the Ask.com toolbar. That seems to be what javaic.dll does. Microsoft Tuesday was the 14th. Some update in that could be causing this. However, I'm factory reseting the machine every time, so unless the patches get slipstreamed into the recovery image, or there is some mechanism by which they get silently installed even if updates are disabled, then I don't see how this can be the cause. Major breakthrough: The default browser on Lenovo systems is Google Chrome. I noticed that the JavaIC.dll "sponsor check" actually does a check on your default browser in order to decide which sponsor ad to display. Normally that would get you the Ask toolbar on IE9. But that toolbar doesn't work on Chrome, and so the installer tries to display a different ad. The different ad is what causes the crash. Changing the default browser to IE9 allows the installer to run correctly. So this looks like a genuine bug in the sponsor ad code in the installer, caused by a combination of Google Chrome default browser and not being in the US. (Installer also checks your location using IP geolocation service and displays different ads based on that.)

  Read the article

• Determining who is running with administrator rights?

  - by Alex C.

  I work at a small non-profit organization with about 55 desktop PCs running Windows XP Pro. The domain controller is running Windows Server 2003. I have a two-part question (note that I'm a bit of a newb when it comes to network administration). Part 1: Is there some simple way that I can determine which accounts are logged in with administrator rights? Part 2: Is there a way that I can remove administrator rights from users without sitting down at each individual machine? Thanks for considering my questions.

  Read the article

• Create a folder shortcut in "My Computer"

  - by Carlos Gil

  I'm trying to add shortcuts to folders in "My Computer". This .reg almost works, I can execute programs like EXPLORE.exe, but I want to open a folder in the same window. Can someone please point out how? Windows Registry Editor Version 5.00 [HKEY_CLASSES_ROOT\CLSID\{00000000-0000-0000-0000-000000000001}] @="SkyDrive" "InfoTip"="Folder Shortcuts" [HKEY_CLASSES_ROOT\CLSID\{00000000-0000-0000-0000-000000000001}\DefaultIcon] @="C:\\Users\\Carlos\\AppData\\Local\\Microsoft\\SkyDrive\\SkyDrive.exe,0" [HKEY_CLASSES_ROOT\CLSID\{00000000-0000-0000-0000-000000000001}\Shell] [HKEY_CLASSES_ROOT\CLSID\{00000000-0000-0000-0000-000000000001}\Shell\Open] @="" [HKEY_CLASSES_ROOT\CLSID\{00000000-0000-0000-0000-000000000001}\Shell\Open\Command] @="C:\\Users\\Carlos\\SkyDrive" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\MyComputer\NameSpace\{00000000-0000-0000-0000-000000000001}] @="SkyDrive"

  Read the article

• Defragment / Performance Monitor without Task Scheduler

  - by mjaggard

  My organisation has a policy of disabling Task Scheduler on all servers and workstations (don't ask, I tried once to wrestle the pig). I need to collect performance stats using Data Collector Sets in Windows 7 or Windows 2008 but the Performance Monitor interface requires Task Scheduler to be running. Is this possible because I'm not trying to schedule anything (except the collection of WMI information every 15 seconds but I doubt it hands that task off to the task scheduler)? Is there any way to trick it into thinking Task Scheduler is running? If not, is there any way to temporarily override the group policy to allow Task Scheduler to run? I've found that most group policy can be overridden in this way by an Administrator by editing the registry. On exactly the same vein, I want to defragment a hard disk on one of my workstations, but I can't get it to start because of the dependancy on Task Scheduler - is it possible to overcome this?

  Read the article

• Please help, I am losing my data?

  - by 5YrsLaterDBA

  I was trying to remove MSDN Library-January 2002 by using Revo Uninstaller. I allowed it to delelet those leftover registry entries(my fault, i should be more careful and don't do that). Now my machine is almost unaccessible, cannot open that Revo Uninstaller to recovery, cannot open Windows Explorer, cannot run CMD command from run, all executable shortcuts are not work anymore. I guess I have to reinstall everything but how can I get my data out of the machine? It is a Dell laptop with Windows XP. I am afraid if I restart my machine, my machine will not come back anymore. Please help.

  Read the article

• Need to setup a RADIUS server to authenticate a Windows client to a Windows server

  - by drosenblatt

  I have a server that I have technicians who need to be able to access using shared credentials. However, doing that violates our security policy (!). I need each user to be able to authenticate using their own credentials, but the server in question has to be logged in with a certain login (these two requirements are clearly diametrically opposed). I thought that this would be a great application for a RADIUS server. I know how to setup RADIUS to go from Windows -- Cisco, but I have no idea how to use RADIUS to authenticate Windows -- Windows. Can this be done? If so, how?

  Read the article

• Removing QWERTY Keyboard Layout Permanently

  - by Phoenix

  Following the instructions in this thread, I added the Dvorak layout to the Regional and Language Options control panel, set it as the default keyboard layout and removed the US (QWERTY) layout. However, even though I removed the QWERTY layout, it still appears in my language bar, and my system defaults to it in every new window. This persists after a log-out/log-in and even a system restart. How do I remove the QWERTY keyboard layout from my system permanently? Alternatively (if outright removing QWERTY is just impossible), can I get Windows to default to Dvorak instead of QWERTY for new windows?

  Read the article

• Can't connect to domain computers until reboot

  - by thealliedhacker

  I have a domain with about 300 Windows 7 and XP machines, with the domain controllers running Server 2003. Sometimes, I lose the ability to communicate/authenticate with some of the machines until I reboot my computer. This also happens from other computers and regardless of user account and operating system. In other words, say I'm on ComputerA, and I can't connect to ComputerX. I can go to ComputerB and connect to ComputerX, but ComputerB may not be able to connect to ComputerY. If you reboot ComputerA, then it will be able to connect to ComputerX again. Here are some messages from various utilities: sc: [SC] OpenSCManager FAILED 1722: The RPC server is unavailable. mmc (compmgmt.msc): Computer (computer name) cannot be managed. The network path was not found. explorer (\\computer): Windows cannot access \\(computer name). ping: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss) / Average = 1ms

  Read the article

• Sharing Internet Connection in Windows 7 is so much more frustrated than Windows XP

  - by Phuong Nguyen

  Back to the time of Windows XP, from Properties dialog of my Wireless Connection, I can enable sharing and then select LAN network from the Drop Down List and boom, I can share it with my friend. We just need a LAN cable (either cross or not-cross is OK) and his Laptop will get an auto IP to gain access to internet. But now with the new Windows 7, everything starts to suck. I cannot see the Drop Down List any more in the sharing panel and my friends Laptop cannot get an automatic IP anymore. Am I doing anything wrong over there? How can I gain back the peace I used to have with Windows XP?

  Read the article

• Sharing Internet Connection in Windows 7 is so much more frustrated than Windows XP

  - by Phuong Nguyen

  Back to the time of Windows XP, from Properties dialog of my Wireless Connection, I can enable sharing and then select LAN network from the Drop Down List and boom, I can share it with my friend. We just need a LAN cable (either cross or not-cross is OK) and his Laptop will get an auto IP to gain access to internet. But now with the new Windows 7, everything starts to suck. I cannot see the Drop Down List any more in the sharing panel and my friends Laptop cannot get an automatic IP anymore. Am I doing anything wrong over there? How can I gain back the peace I used to have with Windows XP?

  Read the article

• Why not install Msvcr71.dll into system32?

  - by hillu

  While looking for an authoritative source for the missing Msvcr71.dll that is needed by a few old applications, I stumbled across the MSDN article Redistribution of the shared C runtime component in Visual C++. The advice given to developers is to drop the DLL into the application's directory instead of system32 since DLLs in this directory are considered before the system paths. What can/will go wrong if I (as an administrator, not a developer) decide to take the lazy path and install Msvcr71.dll (and Msvcp71.dll while I'm at it) into the system32 directory (of 32 bit Windows XP or Windows 7 systems) instead of putting a copy in each application's directory? Is there another good solution to provide the applications with the needed DLLs that doesn't involve copying stuff to the application directories?

  Read the article

• Windows 7 setup hangs after "Starting Windows..."-screen

  - by Eirik Lillebo

  Hi! I'm having some trouble installing Windows 7. I need to install the OS from boot in order to split my C: into two different partitions, as this is not allowed when installing from inside Vista. When I boot up from the install disc, I get the usual "Windows is copying files..."-screen, shortly followed by the "Starting Windows..."-screen with the animated window-logo or whatever. Then it looks as if the installation is about to begin with a blue screen and a cursor I can move around, but here it all stops. Nothing more happens, and the setup seems to hang. Not a single key on my keyboard has any effect, and all I am left to do is to abort and reboot. I've tried to install using two different DVDs (not clones), and the same thing happens every time. What may be causing this, and how may I fix it? Thanks in advance :)

  Read the article

• Editing notepad C:\Windows\System32\drivers\etc\hosts file from within windows 7

  - by Ruvi

  I would like to add an address to C:\Windows\System32\drivers\etc\hosts. I am running Windows 7 (Hebrew edition). I am the system administrator. I have tried the command "notepad C:\Windows\System32\drivers\etc\hosts" to edit the file. I can write into the file but the system does not allow me to save into the file. What can be done to be able to make the addition? What is the correct format for this type of file? All lines in the existing file begin with "#". Does this mean anything?

  Read the article

• Error when adding to the domain : the specified server cannot perform the requested operation

  - by James

  When we add computers to the domain in Windows 7, we get the error: Changing the Primary Domain DNS name of this computer to "" failed. The name will remain "domain.com". The error was: The specified server cannot perform the requested operation. This happens on multiple computers and retrying yields the same result. Despite the error, the computer is still able to login to the domain ok. The DCs are windows 2003. Has anyone found a way to get rid of this error? Any help is appreciated.

  Read the article

• Windows XP - Repairing Corrupt System32\Config\System File

  - by SimonTewsi

  My apologies for this long post. I would like to describe the mess I'm in then ask some questions about how to fix it: Starting up my Windows XP SP1 machine I got the following message: Windows could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM Tried restarting several times with same results then Googled the problem. Tried the fix described here: http://icrontic.com/articles/repair%5Fwindows%5Fxp (since my CPU does not have XD buffer overflow protection I did not set /NOEXECUTE=OPTIN as OS Load Option). This did not work. I then found another fix for the problem on hardwareanalysis.com: Basically, boot to dos prompt (or recovery console if available) and make backups of the following files:- c:\windows\system32\config\system (to c:\windows\tmp\system.bak) c:\windows\system32\config\software (to c:\windows\tmp\software.bak) c:\windows\system32\config\sam (to c:\windows\tmp\sam.bak) c:\windows\system32\config\security (to c:\windows\tmp\security.bak) c:\windows\system32\config\default (to c:\windows\tmp\default.bak) then delete the above files (not the backups!) then copy the above files in c:\windows\repair to the c:\windows\system32\config directory restart your computer This did work (and I wish I'd done it first, since it was completely reversible, unlike the first method). However, afterwards I found that all the user accounts on the PC were gone. I resurrected them by copying the backed up security file back into the system32\config folder (I may have copied the SAM file from backup as well, I cannot remember clearly now). Now the PC boots up and I can log in. However things are still not right. I tried to alter one of the user accounts and found I could not access the User Accounts in the Control Panel. Microsoft KB 919292 had a fix for the problem. However, the fix failed with a Windows Installer error: The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if Windows Installer is not correctly installed. Contact your support personnel for assistance. Windows Installer 3.1 was already installed. I reinstalled it but continued to get the Windows Installer error whenever I tried to run the fix in KB 919292. I have since noticed another three problems: 1) Several applications on the PC no longer run, eg Microsoft Word. Shortcuts no longer seem to do anything and if I run the executables directly (eg for Word by running C:\Program Files\Microsoft Office\Office10\Winword.exe) I get a message similar to: "Microsoft Word has not been installed for the current user. Please run setup to install the application." even though the executable is clearly visible in Windows Explorer (and even though Word actually opens - the error dialog appears after Word has opened. Clicking OK to the error dialog closes Word). 2) One or the other of the two fixes I tried for the original problem caused new user profiles to be created. eg My old user profile under the Documents and Settings folder was Simon. The old one still exists but there is now a new one called Simon.DBQ2515. Obviously the new one is being used because Opera (my browser that still works) no longer sees the bookmarks file under my old profile. 3) Probably as a result of fooling around with the Security file, when I try to boot off the Windows XP CD and run the Recovery Console I am now asked for the administrator password. The only problem is there is no administrator account on the PC. There is one account, LocalAdmin, that has administrative rights but when I entered the password for that account it did not work. It is so long since I originally set up the PC that I cannot remember if the original administrator account ever had a password and, if so, what it was. So, my question is: How can I fix this mess? In particular: 1) Having tried the two fixes linked to above, have I irrepairably damaged the Windows instance, requiring a clean reinstallation of Windows + all applications, or should it be possible to get the machine working correctly again without such drastic measures? 2) Is there any way to get around the administrator password so I can use the Recovery Console again, given that there is no account called "administrator" and the password for the one account with admin privileges does not work (and that, before I started the second fix, I was not asked for an administrator password)? 3) Is there any easy way to fix the problem with the applications that think they are not installed? 4) Is there any easy way to fix the problem of the Windows Installer that does not work, even if reinstalled? Cheers Simon

  Read the article

• Install a program from the network

  - by Gomibushi

  In Windows there is a place under the Control Panel called Get Programs and Install a program from the network (in Win 7 at least), possibly a slightly different name in Vista, but it was there too. The question is basically: How do you publish programs to that so users can go there and install? Bonus follow up: Is it a good way to deploy optional programs? (Compared to using GPO's.) In Windows 7 you can go to Control Panel, Programs, Programs and Features, and on the left hand menu: Install a program from the network.

  Read the article

• Why not install Msvcr71.dll into system32?

  - by hillu

  While looking for an authoritative source for the missing Msvcr71.dll that is needed by a few old applications, I stumbled across the MSDN article Redistribution of the shared C runtime component in Visual C++. The advice given to developers is to drop the DLL into the application's directory instead of system32 since DLLs in this directory are considered before the system paths. What can/will go wrong if I (as an administrator, not a developer) decide to take the lazy path and install Msvcr71.dll (and Msvcp71.dll while I'm at it) into the system32 directory (of 32 bit Windows XP or Windows 7 systems) instead of putting a copy in each application's directory? Is there another good solution to provide the applications with the needed DLLs that doesn't involve copying stuff to the application directories? added after first answers: I understand that incompatible API changes may have been made to the mentioned DLLs, but pretty much every mention of incompatibilities I have found using Google had to do with games or video codecs. Right now, I expect that the risk of breakage is pretty small. Am I missing something?

  Read the article

• Only ONE Outlook 2010 installation "Cannot connect to Exchange server" when setting up new profile.

  - by Johnny PDEX

  Exchange 2010, one-server installation (small production, I know not best practice) OWA Connectivity has been confirmed, Autodiscover is configured and working properly for EVERY other installation. Other user accounts tested on problem Outlook, none can connect. Windows Firewall is pre-configured by Group Policy, only modifications being related to remote management. Firewall has also been disabled during diagnostic period. Network discovery and file sharing is enabled on workstation as well. Windows 7 Professional, latest updates installed. Driving me nuts. Help, serverfault?

  Read the article

• Windows sometimes minimizes game and shows the desktop?

  - by Gary

  For some reason, every once in a while when I'm playing a full-screen game in Windows 7, the game will minimize and focus will be given to the Desktop. I don't know what does this because no other problem appears to activate (nothing new in the taskbar or system tray appears). This occurs in a variety of games, from a variety of publishers, so it's definitely not the game that's having the problem. When this occurs, I can simply click on the game to go back to it, but it's obviously still quite annoying. Anyone know what's going on here? Is this a common occurrence with a simple fix? Thanks in advance!

  Read the article

• Shortcut key for "Open file location" in Windows 7

  - by richardh

  I'm new to Windows (former Mac user) and using Windows 7 for about two months now. I almost exclusively use the taskbar to navigate to files (i.e., I press the Win/meta key and start typing... my libraries and naming conventions make it pretty easy to get the correct file). Then I press enter and the file opens. Awesome. But sometimes I want to see the file in its folder (i.e., maybe I want to rename, move, copy, etc.). To do this I need to mouse/trackpad over and right click to get the "Open in file location" options. Is there another way, short of searching for the folder name instead? Is there a hotkey/shortcut for "Open file location"? Thanks!

  Read the article

• Configuring Corporate Windows Error Reporting On Windows 7

  - by Clément

  Is there any good documentation out there explaining how to setup Corporate Error Reporting (CER) on Windows 7? I found some information in Advanced Windows Debugging but the book targets Windows XP and things have changed quite a bit since then. I could not find any tutorials on the Internet/MSDN either. To give a bit of background information, I work for a company with 25 employees and I would like to send crash reports to a local server so that I can analyze what causes our tools to crash. I think I need to know two things: Setting up a Corporate Error Reporting server. Setting up computer to send error reports to our Corporate Error Reporting server.

  Read the article

• Windows: Is there something to see and remotely control single(!) windows on a remote PC?

  - by Horst Walter

  Is there something where I can see and control single(!) windows of PC1 on PC2 remotely. Basically like it is possible with X-Windows. I am not talking / asking about A software which displays the whole desktop remotely (like VNC, Windows RDP). A X-windows server for windows, to connect to Linux. The answer here ( Windows Remote Desktop Connection for just a single window (or a single program) ) requires Windows Server 2008. I need to run this on two Windows 7 machines. Example: PC1 shows three windows, and I transfer, see, and control window 2 on PC2. -- Edit -- I have checked whether there is an X-Server for Windows <- Windows. But there seems not to be one other than Unix <- Windows: http://stackoverflow.com/questions/40453/what-is-a-good-and-free-x-server-for-windows

  Read the article

• WSUS Looping 2 updates on 2003 servers

  - by Ericrobert

  Good afternoon, Hopefully I can articulate this so that people understand my problem. We have WSUS on windows server 2008. We have 8 Windows 2003 servers. There is an update ready to install KB2982792. We install it then it says there is another update to install KB2728973. Then it says there is another update to install, again KB2982792. This goes on and on. Talked to microsoft support and they confirmed that the update was infact installed and applied to the computer (Checking untrusted certifactions confirmed that for these updates) and their suggestion was to just "Hide update". This is fine except on the WSUS server it still shows failed updates which is not okay with our policy. I'm here to ask for help figuring this out and what I can do to trouble shoot it. Thank you in advanced.

  Read the article

• Windows 8.1 will not boot after upgrading from Windows 8 on my PC

  - by user266969

  I have not found a fix. After running the Windows 8.1 Update from the store my computer will not boot unless In insert my recovery USB drive and try to repair. (The repair fails.) However after I power of the PC and remove the USB drive. The PC will boot correctly once. I would leave the PC on but it shuts it self off at night. (And yes I have checked my power profile, it is set to never.) The only thing I have found online is a possibly corrupt video driver. I uninstalled the video driver reboot and it did not fix the issue. Anybody have any suggestions? The PC is a HP EliteBook 8730w laptop. I had no issues with Windows 8 or the Windows 8.1 preview.

  Read the article

• Getting a Non-Genuine windows message on a Genuin Windows 7

  - by user36257

  I have a Genuin Win7 enterprise on my Laptop. A few hours ago when I wanted to log into windows it did not accept my Password. I used the safe mode and it accepted the password I was using before this new password. It is the laptop for work and we have a changing password policy for every three months, so the pasword that I could use in SAFE MODE was the password I had for the last previous threee months. ... after that I used SYSTEM RESTORE and it reveretd it back to Yesterday ... so this time I could loging successfully with my current password. BUT It shows me a message that I am a victim of software counterfeiting and when I restarted the windows again and logged into windows, this time it is just a black desktop. weird...any ideas?

  Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >