Search Results

Search found 17437 results on 698 pages for 'nick long'.

Page 640/698 | < Previous Page | 636 637 638 639 640 641 642 643 644 645 646 647  | Next Page >

  • Is there a scheduling algorithm that optimizes for "maker's schedules"?

    - by John Feminella
    You may be familiar with Paul Graham's essay, "Maker's Schedule, Manager's Schedule". The crux of the essay is that for creative and technical professionals, meetings are anathema to productivity, because they tend to lead to "schedule fragmentation", breaking up free time into chunks that are too small to acquire the focus needed to solve difficult problems. In my firm we've seen significant benefits by minimizing the amount of disruption caused, but the brute-force algorithm we use to decide schedules is not sophisticated enough to handle scheduling large groups of people well. (*) What I'm looking for is if there's are any well-known algorithms which minimize this productivity disruption, among a group of N makers and managers. In our model, There are N people. Each person pi is either a maker (Mk) or a manager (Mg). Each person has a schedule si. Everyone's schedule is H hours long. A schedule consists of a series of non-overlapping intervals si = [h1, ..., hj]. An interval is either free or busy. Two adjacent free intervals are equivalent to a single free interval that spans both. A maker's productivity is maximized when the number of free intervals is minimized. A manager's productivity is maximized when the total length of free intervals is maximized. Notice that if there are no meetings, both the makers and the managers experience optimum productivity. If meetings must be scheduled, then makers prefer that meetings happen back-to-back, while managers don't care where the meeting goes. Note that because all disruptions are treated as equally harmful to makers, there's no difference between a meeting that lasts 1 second and a meeting that lasts 3 hours if it segments the available free time. The problem is to decide how to schedule M different meetings involving arbitrary numbers of the N people, where each person in a given meeting must place a busy interval into their schedule such that it doesn't overlap with any other busy interval. For each meeting Mt the start time for the busy interval must be the same for all parties. Does an algorithm exist to solve this problem or one similar to it? My first thought was that this looks really similar to defragmentation (minimize number of distinct chunks), and there are a lot of algorithms about that. But defragmentation doesn't have much to do with scheduling. Thoughts? (*) Practically speaking this is not really a problem, because it's rare that we have meetings with more than ~5 people at once, so the space of possibilities is small.

    Read the article

  • Alternative to Page_Load in ASP.NET (and a good WTF story)

    - by Jason
    Woo, I have a doozy of a problem (might even be one for the Daily WTF) and I'm hoping there's a solution. (My apologies for the long post...) I have been working on a website that I inherited about a month ago. One of the parts I have been working on is fixing one of the controls (essentially a dynamic header bar) so that it displays additional information as requested by my users. As part of doing this project, I created a Site.master file so that I wouldn't have to recode the header bar into every single page. When I first started doing this, it seemingly worked very well. All the pages I had developed looked great and the bar updated as it should displaying the information as it should. Well, when I dropped the Site.master (and this control) into older site pages (ones I did not specifically develop) I noticed that it looked bad on some of them, but not all of them. When I say it looked bad, basically, the control would left-align itself to the page rather than center as it should. I spent a couple hours debugging to no avail - CSS looked correct, the HTML appeared to be okay, I didn't see anything in the Javascript (although, I did miss something as I'll point out in a second), and even the old code looked correct (to the best that it could - it's not very well written). Another coworker took a look at the site and couldn't find anything at first, either. It wasn't until I just thought to look at the rendered source code of the page (I had been working in the developer view up to this point in IE8) that it became clear what was wrong. The original developer performs searches on many of the pages. To accomplish this, he queries the database for ALL the data and then loads them into Javascript arrays within the page so he can get access to them. This in itself is a huge problem because we're talking about thousands of items, and it obviously isn't scalable (and, yes, the site is slow). However, it finally clicked what was screwing up the Site.master - when he loads the data into the Javascript arrays, he writes out the data to the HTML upon Page_Load using numerous Response.Write(string) calls. The WTF (and what was messing me up) is that he inserts the Javascript before the DOCTYPE causing IE to go into quirks mode! So, because I need to at least get this release out (I'll fix the real problem later), I was wondering: is there a way I can force this Javascript to be inserted elsewhere into the HTML—after the DOCTYPE at the very least? Right now, all the Response.Write() calls are being done in the Page_Load method. I just need them to be inserted later.

    Read the article

  • Increase efficiency for an R simulator of the Monty Hall Puzzle

    - by jahan_m
    The Monty Hall Problem is a simple puzzle involving probability that even stumps professionals in careers dealing with some heavy-duty math. Here's the basic problem: Suppose you're on a game show, and you're given the choice of three doors: Behind one door is a car; behind the others, goats. You pick a door, say No. 1, and the host, who knows what's behind the doors, opens another door, say No. 3, which has a goat. He then says to you, "Do you want to pick door No. 2?" Is it to your advantage to switch your choice? You can find numerous explanations of the solution here: http://en.wikipedia.org/wiki/Monty_Hall_problem Goal of my simulation: Prove that a switching strategy will win you the car 2/3 of the time. I got curious and wanted to write a little function that simulates the problem many times and returns the proportion of wins if you switched and the proportion of wins if you stayed with your first choice. The function then plots the cumulative wins. First and foremost, I'm interested in hearing if my simulation is indeed replicating the Monty Problem, or if some aspect of the code got it wrong. Secondly, this function takes a long time to run once I get to about 10,000 simulations. I know I don't need this many simulations to prove this but I'd love to hear some ideas on how to make it more efficient. Thanks for your feedback! Monty_Hall=function(repetitions){ doors=c('A','B','C') stay_wins=0 switch_wins=0 series=data.frame(sim_num=seq(repetitions),cum_sum_stay=replicate(repetitions,0),cum_sum_switch=replicate(repetitions,0)) for(i in seq(repetitions)){ winning_door=sample(doors,1) contestant_chooses=sample(doors,1) if(contestant_chooses==winning_door) stay_wins=stay_wins+1 else switch_wins=switch_wins+1 series[i,'cum_sum_stay']=stay_wins series[i,'cum_sum_switch']=switch_wins } plot(series$sim_num,series$cum_sum_switch,col=2,ylab='Cumulative # of wins', xlab='Simulation #',main=sprintf('%d Simulations of the Monty Hall Paradox',repetitions),type='l') lines(series$sim_num,series$cum_sum_stay,col=4) legend('topleft',legend=c('Cumulative wins from switching', 'Cumulative wins from staying'),col=c(2,4),lty=1) result=list(series=series,stay_wins=stay_wins,switch_wins=switch_wins, proportion_stay_wins=stay_wins/repetitions, proportion_switch_wins=switch_wins/repetitions) return(result) } #Theory predicts that it is to the contestant's advantage if he #switches his choice to the other door. This function simulates the game #many times, and shows you the proportion of games in which staying or #switching would win the car. It also plots the cumulative wins for each strategy. Monty_Hall(100)

    Read the article

  • Parallel For Loop - Problems when adding to a List

    - by Kevin Crowell
    I am having some issues involving Parallel for loops and adding to a List. The problem is, the same code may generate different output at different times. I have set up some test code below. In this code, I create a List of 10,000 int values. 1/10th of the values will be 0, 1/10th of the values will be 1, all the way up to 1/10th of the values being 9. After setting up this List, I setup a Parallel for loop that iterates through the list. If the current number is 0, I add a value to a new List. After the Parallel for loop completes, I output the size of the list. The size should always be 1,000. Most of the time, the correct answer is given. However, I have seen 3 possible incorrect outcomes occur: The size of the list is less than 1,000 An IndexOutOfRangeException occurs @ doubleList.Add(0.0); An ArgumentException occurs @ doubleList.Add(0.0); The message for the ArgumentException given was: Destination array was not long enough. Check destIndex and length, and the array's lower bounds. What could be causing the errors? Is this a .Net bug? Is there something I can do to prevent this from happening? Please try the code for yourself. If you do not get an error, try it a few times. Please also note that you probably will not see any errors using a single-core machine. using System; using System.Collections.Generic; using System.Threading.Tasks; namespace ParallelTest { class Program { static void Main(string[] args) { List<int> intList = new List<int>(); List<double> doubleList = new List<double>(); for (int i = 0; i < 250; i++) { intList.Clear(); doubleList.Clear(); for (int j = 0; j < 10000; j++) { intList.Add(j % 10); } Parallel.For(0, intList.Count, j => { if (intList[j] == 0) { doubleList.Add(0.0); } }); if (doubleList.Count != 1000) { Console.WriteLine("On iteration " + i + ": List size = " + doubleList.Count); } } Console.WriteLine("\nPress any key to exit."); Console.ReadKey(); } } }

    Read the article

  • many-to-many performance concerns with fluent nhibernate.

    - by Ciel
    I have a situation where I have several many-to-many associations. In the upwards of 12 to 15. Reading around I've seen that it's generally believed that many-to-many associations are not 'typical', yet they are the only way I have been able to create the associations appropriate for my case, so I'm not sure how to optimize any further. Here is my basic scenario. class Page { IList<Tag> Tags { get; set; } IList<Modification> Modifications { get; set; } IList<Aspect> Aspects { get; set; } } This is one of my 'core' classes, and coincidentally one of my core tables. Virtually half of the objects in my code can have an IList<Page>, and some of them have IList<T> where T has its own IList<Page>. As you can see, from an object oriented standpoint, this is not really a problem. But from a database standpoint this begins to introduce a lot of junction tables. So far it has worked fine for me, but I am wondering if anyone has any ideas on how I could improve on this structure. I've spent a long time thinking and in order to achieve the appropriate level of association required, I cannot think of any way to improve it. The only thing I have come up with is to make intermediate classes for each object that has an IList<Page>, but that doesn't really do anything that the HasManyToMany does not already do except introduce another class. It does not extend the functionality and, from what I can tell, it does not improve performance. Any thoughts? I am also concerned about Primary Key limits in this scenario. Most everything needs to be able to have these properties, but the Pages cannot be unique to each object, because they are going to be frequently shared and joined between multiple objects. All relationships are one-sided. (That is, a Page has no knowledge of what owns it). Because of this, I also have no Inverse() mapped HasManyToMany collections. Also, I have read the similar question : Usage of ORMs like NHibernate when there are many associations - performance concerns But it really did not answer my concerns.

    Read the article

  • How do I display a jquery dialog box before the entire page is loaded?

    - by obarshay
    On my site a number of operations can take a long time to complete. When I know a page will take a while to load, I would like to display a progress indicator while the page is loading. Ideally I would like to say something along the lines of: $("#dialog").show("progress.php"); and have that overlay on top of the page that is being loaded (disappearing after the operation is completed). Coding the progress bar and displaying progress is not an issue, the issue is getting a progress indicator to pop up WHILE the page is being loaded. I have been trying to use JQuery's dialogs for this but they only appear after the page is already loaded. This has to be a common problem but I am not familiar enough with JavaScript to know the best way to do this. Here's simple example to illustrate the problem. The code below fails to display the dialog box before the 20 second pause is up. I have tried in Chrome and Firefox. In fact I don't even see the "Please Wait..." text. Here's the code I am using: <html> <head> <link type="text/css" href="http://jqueryui.com/latest/themes/base/ui.all.css" rel="stylesheet" /> <script type="text/javascript" src="http://jqueryui.com/latest/jquery-1.3.2.js"></script> <script type="text/javascript" src="http://jqueryui.com/latest/ui/ui.core.js"></script> <script type="text/javascript" src="http://jqueryui.com/latest/ui/ui.dialog.js"></script> </head> <body> <div id="please-wait">My Dialog</div> <script type="text/javascript"> $("#please-wait").dialog(); </script> <?php flush(); echo "Waiting..."; sleep(20); ?> </body> </html>

    Read the article

  • How to maxmise the largest contiguous block of memory in the Large Object Heap

    - by Unsliced
    The situation is that I am making a WCF call to a remote server which is returns an XML document as a string. Most of the time this return value is a few K, sometimes a few dozen K, very occasionally a few hundred K, but very rarely it could be several megabytes (first problem is that there is no way for me to know). It's these rare occasions that are causing grief. I get a stack trace that starts: System.OutOfMemoryException: Exception of type 'System.OutOfMemoryException' was thrown. at System.Xml.BufferBuilder.AddBuffer() at System.Xml.BufferBuilder.AppendHelper(Char* pSource, Int32 count) at System.Xml.BufferBuilder.Append(Char[] value, Int32 start, Int32 count) at System.Xml.XmlTextReaderImpl.ParseText() at System.Xml.XmlTextReaderImpl.ParseElementContent() at System.Xml.XmlTextReaderImpl.Read() at System.Xml.XmlTextReader.Read() at System.Xml.XmlReader.ReadElementString() at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationReaderMDRQuery.Read2_getMarketDataResponse() at Microsoft.Xml.Serialization.GeneratedAssembly.ArrayOfObjectSerializer2.Deserialize(XmlSerializationReader reader) at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events) at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle) at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) I've read around and it is because the Large Object Heap is just getting too fragmented, so even preceding the call with a quick check to StringBuilder.EnsureCapacity just causes the OutOfMemoryException to be thrown earlier (and because I'm guessing at what's needed, it might not actually need that much so my check is causing more problems than it is solving). Some opinions are that there's not much I can do about it. Some of the questions I've asked myself: Use less memory - have you checked for leaks? Yes. The memory usage goes up and down, but there's no fundamental growth that guarantees this to happen. Some of the times it fails, it succeeded at that stage previously. Transfer smaller amounts Not an option, this is a third party web service over which I have no control (or at least it would take a long time to resolve, in the meantime I still have a problem) Can you do something to the LOH to make it less likely to fail? ... now this is most fruitful course. It's a 32-bit process (it has to be for various political, technical and boring reasons) but there's normally hundreds of meg free (multiples of the largest amount for which we've seen failures). Can we monitor the LOH? Using perfmon I can track the size of the heaps, but I don't think there's a way to monitor the largest available contiguous block of memory. Question is: any advice or suggestions for things to try?

    Read the article

  • Memory management with Objective-C Distributed Objects: my temporary instances live forever!

    - by jkp
    I'm playing with Objective-C Distributed Objects and I'm having some problems understanding how memory management works under the system. The example given below illustrates my problem: Protocol.h #import <Foundation/Foundation.h> @protocol DOServer - (byref id)createTarget; @end Server.m #import <Foundation/Foundation.h> #import "Protocol.h" @interface DOTarget : NSObject @end @interface DOServer : NSObject < DOServer > @end @implementation DOTarget - (id)init { if ((self = [super init])) { NSLog(@"Target created"); } return self; } - (void)dealloc { NSLog(@"Target destroyed"); [super dealloc]; } @end @implementation DOServer - (byref id)createTarget { return [[[DOTarget alloc] init] autorelease]; } @end int main() { NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; DOServer *server = [[DOServer alloc] init]; NSConnection *connection = [[NSConnection new] autorelease]; [connection setRootObject:server]; if ([connection registerName:@"test-server"] == NO) { NSLog(@"Failed to vend server object"); } else [[NSRunLoop currentRunLoop] run]; [pool drain]; return 0; } Client.m #import <Foundation/Foundation.h> #import "Protocol.h" int main() { unsigned i = 0; for (; i < 3; i ++) { NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; id server = [NSConnection rootProxyForConnectionWithRegisteredName:@"test-server" host:nil]; [server setProtocolForProxy:@protocol(DOServer)]; NSLog(@"Created target: %@", [server createTarget]); [[NSRunLoop currentRunLoop] runUntilDate:[NSDate dateWithTimeIntervalSinceNow:1.0]]; [pool drain]; } return 0; } The issue is that any remote objects created by the root proxy are not released when their proxy counterparts in the client go out of scope. According to the documentation: When an object’s remote proxy is deallocated, a message is sent back to the receiver to notify it that the local object is no longer shared over the connection. I would therefore expect that as each DOTarget goes out of scope (each time around the loop) it's remote counterpart would be dellocated, since there is no other reference to it being held on the remote side of the connection. In reality this does not happen: the temporary objects are only deallocate when the client application quits, or more accurately, when the connection is invalidated. I can force the temporary objects on the remote side to be deallocated by explicitly invalidating the NSConnection object I'm using each time around the loop and creating a new one but somehow this just feels wrong. Is this the correct behaviour from DO? Should all temporary objects live as long as the connection that created them? Are connections therefore to be treated as temporary objects which should be opened and closed with each series of requests against the server? Any insights would be appreciated.

    Read the article

  • WLI domain with 3 servers - issues on JPD process startup

    - by XpiritO
    Hi there. I'm currently working on a clustered WLI environment which comprehends 3 servers: 1 admin server ("AdminServer") and 2 managed servers ("mn1" and "mn2") grouped as a cluster, as follows: Architecture diagram: http://img72.imageshack.us/img72/4112/clusterdiagram.jpg I've developed a JPD process to execute some scheduled tasks, invoked using a Message Broker. I've deployed this project into a single-server WLI domain (with AdminServer only) and it works as expected: the JPD process is invoked (I've configured a Timer Event Generator instance to start it up). Message broker: http://img532.imageshack.us/img532/1443/wlimessagebroker.jpg Timer event generator: http://img408.imageshack.us/img408/7358/wlitimereventgenerator.jpg In order to achieve fail-over and load-balancing capabilities, I'm currently trying to deploy this JPD process into this clustered WLI environment. Although, I'm having some issues with this, as I cannot get it to work properly, even if it still works. Here is a screenshot of the "WLI Process Instance Monitor" (with AdminServer and mn1 instances up and running): http://img710.imageshack.us/img710/8477/wliprocessinstancemonit.jpg According to this screen the process seems to be running, as it shows in this instance monitor screen. However, I don't see any output coming out neither at AdminServer console or mn1 console. In single-server domain it was visible output from JPD process "timeout" callback method, wich implementation is shown below: @com.bea.wli.control.broker.MessageBroker.StaticSubscription(xquery = "", filterValueMatch = "", channelName = "/SamplePrefix/Samples/SampleStringChannel", messageBody = "{x0}") public void subscription(java.lang.String x0) { String toReturn=""; try { Context myCtx = new InitialContext(); MBeanHome mbeanHome = (MBeanHome)myCtx.lookup("weblogic.management.home.localhome"); toReturn=mbeanHome.getMBeanServer().getServerName(); System.out.println("**** executed at **** " + System.currentTimeMillis() + " by: " + toReturn); } catch (Exception e) { System.out.println("Exception!"); e.printStackTrace(); } } (...) @org.apache.beehive.controls.api.events.EventHandler(field = "myT", eventSet = com.bea.control.WliTimerControl.Callback.class, eventName = "onTimeout") public void myT_onTimeout(long time, java.io.Serializable data) { // #START: CODE GENERATED - PROTECTED SECTION - you can safely add code above this comment in this method. #// // input transform System.out.println("**** published at **** " + System.currentTimeMillis()); publishControl.publish("aaaa"); // parameter assignment // #END : CODE GENERATED - PROTECTED SECTION - you can safely add code below this comment in this method. #// } and here is the output visible at "AdminServer" console in single-server domain testing: **** published at **** 1273238090713 **** executed at **** 1273238132123 by: AdminServer **** published at **** 1273238152462 **** executed at **** 1273238152562 by: AdminServer (...) What may be wrong with my clustered configuration? Am I missing something to accomplish clustered deployment? Thanks in advance for your help.

    Read the article

  • How to retain canvas state and use it in onDraw() method

    - by marqss
    I want to make a measure tape component for my app. It should look something like this with values from 0cm to 1000cm: Initially I created long bitmap image with repeated tape background. I drew that image to canvas in onDraw() method of my TapeView (extended ImageView). Then I drew a set of numbers with drawText() on top of the canvas. public TapeView(Context context, AttributeSet attrs){ ImageView imageView = new ImageView(mContext); LayoutParams params = new LayoutParams(LayoutParams.WRAP_CONTENT, LayoutParams.FILL_PARENT); imageView.setLayoutParams(params); mBitmap = createTapeBitmap(); imageView.setImageBitmap(mBitmap); this.addView(imageView); } private Bitmap createTapeBitmap(){ Bitmap mBitmap = Bitmap.createBitmap(5000, 100, Config.ARGB_8888); //size of the tape Bitmap tape = BitmapFactory.decodeResource(getResources(),R.drawable.tape);//the image size is 100x100px Bitmap scaledTape = Bitmap.createScaledBitmap(tape, 100, 100, false); Canvas c = new Canvas(mBitmap); Paint paint = new Paint(); paint.setColor(Color.WHITE); paint.setFakeBoldText(true); paint.setAntiAlias(true); paint.setTextSize(30); for(int i=0; i<=500; i++){ //draw background image c.drawBitmap(scaledTape,(i * 200), 0, null); //draw number in the middle of that background String text = String.valueOf(i); int textWidth = (int) paint.measureText(text); int position = (i * 100) + 100 - (textWidth / 2); c.drawText(text, position, 20, paint); } return mBitmap; } Finally I added this view to HorizontalScrollView. At the beginning everything worked beautifully but I realised that the app uses a Lot of memory and sometimes crashed with OutOfMemory exception. It was obvious because a size of the bitmap image was ~4mb! In order to increase the performance, instead of creating the bitmap I use Drawable (with the yellow tape strip) and set the tile mode to REPEAT: setTileModeX(TileMode.REPEAT); The view now is very light but I cannot figure out how to add numbers. There are too many of them to redraw them each time the onDraw method is called. Is there any way that I can draw these numbers on canvas and then save that canvas so it can be reused in onDraw() method?

    Read the article

  • ColdFusion's cfquery failing silently

    - by johnthexiii
    I have a query that retrieves a large amount of data. <cfsetting requesttimeout="9999999" > <cfquery name="randomething" datasource="ds" timeout="9999999" > SELECT col1, col2 FROM table </cfquery> <cfdump var="#randomething.recordCount#" /> <!---should be about 5 million rows ---> I can successfully retrieve the data with python's cx_Oracle and using sys.getsizeof on the python list returns 22621060, so about 21 megabytes. ColdFusion does not return an error on the page, and I can't find anything in any of the logs. Why is cfdump not showing the number of rows? Additional Information The reason for doing it this way is because I have about 8000 smaller queries to run against the randomthing query. In other words when I run those 8000 queries against the database it takes hours for that process to complete. I suspect this is because I am competing with several other database users, and the database is getting bogged down. The 8000 smaller queries are getting counts of col1 over a period of col2. SELECT count(col1) as count WHERE col2 < 20121109 AND col2 > 20121108 According to Adam Cameron's suggestions. cflog is suggesting that the query isn't finishing. I tried changing the queries timeout both in the code and in the CFIDE/administrator, apparently CF9 no long respects the timeout attribute, regardless of what I tried I couldn't get the query to timeout. I also started playing around with the maxrows attribute to see if I could discern any information that way. when maxrows is set to 1300000 everything works fine when maxrows is 1400000 or greater I get this error when maxrows is 2000000 I observe my original problem Update So this isn't a limit of cfquery. By using QueryNew then looping over it to add data and I can get well past the 2 million mark without any problems. I also created a ThinClient datasource using the information in this question, I didn't observe any change in behavior. The messages on the database end are SQL*Net message from client and SQL*Net more data to client I just discovered that by using the thin client along with blockfactor1="100" I can retrieve more rows (appx. 3000000).

    Read the article

  • Symfony : ajax call cause server to queue next queries

    - by Remiz
    Hello, I've a problem with my application when an ajax call on the server takes too much time : it queue all the others queries from the user until it's done server side (I realized that canceling the call client side has no effect and the user still have to wait). Here is my test case : <script type="text/javascript" src="jquery-1.4.1.min.js"></script> <a href="another-page.php">Go to another page on the same server</a> <script type="text/javascript"> url = 'http://localserver/some-very-long-complex-query'; $.get(url); </script> So when the get is fired and then after I click on the link, the server finish serving the first call before bringing me to the other page. My problem is that I want to avoid this behavior. I'm on a LAMP server and I'm looking in a way to inform the server that the user aborted the query with function like connection_aborted(), do you think that's the way to go ? Also, I know that the longest part of this PHP script is a MySQL query, so even if I know that connection_aborted() can detect that the user cancel the call, I still need to check this during the MySQL query... I'm not really sure that PHP can handle this kind of "event". So if you have any better idea, I can't wait to hear it. Thank you. Update : After further investigation, I found that the problem happen only with the Symfony framework (that I omitted to precise, my bad). It seems that an Ajax call lock any other future call. It maybe related to the controller or the routing system, I'm looking into it. Also for those interested by the problem here is my new test case : -new project with Symfony 1.4.3, default configuration, I just created an app and a default module. -jquery 1.4 for the ajax query. Here is my actions.class.php (in my unique module) : class defaultActions extends sfActions { public function executeIndex(sfWebRequest $request) { //Do nothing } public function executeNewpage() { //Do also nothing } public function executeWaitingaction(){ // Wait sleep(30); return false; } } Here is my indexSuccess.php template file : <script type="text/javascript" src="jquery-1.4.1.min.js"></script> <a href="<?php echo url_for('default/newpage');?>">Go to another symfony action</a> <script type="text/javascript"> url = '<?php echo url_for('default/waitingaction');?>'; $.get(url); </script> For the new page template, it's not very relevant... But with this, I'm able to reproduce the lock problem I've on my real application. Is somebody else having the same issue ? Thanks.

    Read the article

  • JSONArray does not work when I am getting the JSON string from the server

    - by Taehoon A Kim
    I've looked up some answers but am not sure why mine is failing exactly... The code looks something like this HttpResponse httpResponse = httpClient.execute(httpPost); HttpEntity httpEntity = httpResponse.getEntity(); String json = EntityUtils.toString(httpEntity); //Convert to JsonArray JSONArray jsonArray = new JSONArray(json); Log.i(DEBUG_TAG, Integer.toString(jsonArray.length())); for (int i = 0; i < jsonArray.length(); i++) { JSONObject jsonObject = jsonArray.getJSONObject(i); Log.i(DEBUG_TAG, jsonObject.getString(KEY_ID)); // creating new HashMap HashMap<String, String> map = new HashMap<String, String>(); // adding each child node to HashMap key => value map.put(KEY_ID, jsonObject.getString(KEY_ID)); map.put(KEY_TITLE, jsonObject.getString(KEY_TITLE)); map.put(KEY_ARTIST, jsonObject.getString(KEY_ARTIST)); map.put(KEY_DURATION, jsonObject.getString(KEY_DURATION)); map.put(KEY_VOTECOUNT, jsonObject.getString(KEY_VOTECOUNT)); map.put(KEY_THUMB_URL, jsonObject.getString(KEY_THUMB_URL)); map.put(KEY_GENRE, jsonObject.getString(KEY_GENRE)); //Adding map to ArrayList if (Integer.parseInt(jsonObject.getString(KEY_VOTECOUNT)) == -1){ //If VoteCount is -1 then add to header headerList.add(map); }else { songsList.add(map); } } } catch (UnsupportedEncodingException e) { e.printStackTrace(); } catch (ClientProtocolException e) { e.printStackTrace(); } catch (IOException e) { e.printStackTrace(); } When I run logcat on String json, it seems to show correct info which is kind of like this... { "userdata": [ { "id": "8", "title": "Baby One More Time", "artist": "Britney Spears", "duration": "03:24:00", "votes": "0", "thumb_url": "http://api.androidhive.info/music/images/dido.png", "genre": null }, { "id": "2", "title": "As Long As You Love Me", "artist": "Justin Bieber", "duration": "05:26:00", "votes": "0", "thumb_url": "http://api.androidhive.info/music/images/enrique.png", "genre": "Rock" } ] } and the logcat on JSONArray jsonArray = new JSONArray(json); tells me that jsonArray.length() 10-31 22:57:28.433: W/CustomizedListView(26945): error! Invalid index 0, size is 0 Please let me know Thank you,

    Read the article

  • ASP.NET MVC CRUD PartialView Popup Issue

    - by Smiley Face
    I am creating an MVC website which makes use of Partial Views on Popups to handle all my CRUD transactions. Please note that my application can already handle these CRUD operations perfectly (LINQ-To-Entity). However, I have a problem with my popup forms. Below is the code from my _Add.cshtml: @model MyStore.Models.MyModels.ProductsModel @{ Layout = null; } @using (Ajax.BeginForm("_Add", "Products", new AjaxOptions { InsertionMode = InsertionMode.Replace, HttpMethod = "POST", OnSuccess = "addSuccess" }, new { @id = "addForm" })) { @Html.ValidationSummary(true) <div id="add-message" class="error invisible"></div> <fieldset> <legend>Products</legend> @Html.HiddenFor(m => Model.ProductCode) <div class="editor-label"> @Html.LabelFor(model => model.ProductName) </div> <div class="editor-field"> @Html.EditorFor(model => model.ProductName) @Html.ValidationMessageFor(model => model.ProductName) </div> <div class="editor-label"> @Html.LabelFor(model => model.Price) </div> <div class="editor-field"> @Html.TextBoxFor(model => model.Price) @Html.ValidationMessageFor(model => model.Price) </div> </fieldset> } Below is the code from my Controller: [HttpGet] public ActionResult _Add(string productCode) { ProductsModel model = newProductsModel(); model.ProductCode = ProductCode ; return PartialView(model); } [HttpPost] public JsonResult _Add(ProductsModel model) { if (ModelState.IsValid) { ProductsManager prod = new ProductsManager(); Products pa = new Products(); pa.ProductCode = model.ProductCode; pa.ProductName = model.ProductName; pa.Price = model.Price; prod.AddProduct(pa); return Json(HelperClass.SuccessResponse(pa), JsonRequestBehavior.AllowGet); } else { return Json(HelperClass.ErrorResponse("Please review your form"), JsonRequestBehavior.DenyGet); } } Please note that the _Add.cshtml is a partial view which is being rendered through a Popup.js which I found on the internet. It is rendered through this code: @Html.ActionLink("[Add Product]", "_Add", new { ProductCode = @ViewData["ProductCode"] }, new { @class = "editLink" }) This works okay. I mean it adds product to my database. But my problem is upon clicking the Proceed button, I get this pop-up download dialog from the page: Can somebody please help me with this? I have a hunch it's because of the HttpMethod i'm using (POST, PUT, GET, DELETE) but i'm not really sure which one is right to use or if it really is the problem in the first place. Any help would be greatly appreciated! PS. Sorry for the long post.

    Read the article

  • Python File Search Line And Return Specific Number of Lines after Match

    - by Simos Anderson
    I have a text file that has lines representing some data sets. The file itself is fairly long but it contains certain sections of the following format: Series_Name INFO Number of teams : n1 | Team | # | wins | | TeamName1 | x | y | . . . | TeamNamen1 | numn | numn | Some Irrelevant lines Series_Name2 INFO Number of teams : n1 | Team | # | wins | | TeamName1 | num1 | num2 | . where each section has a header that begins with the Series_Name. Each Series_Name is different. The line with the header also includes the number of teams in that series, n1. Following the header line is a set of lines that represents a table of data. For each series there are n1+1 rows in the table, where each row shows an individual team name and associated stats. I have been trying to implement a function that will allow the user to search for a Team name and then print out the line in the table associated with that team. However, certain team names show up under multiple series. To resolve this, I am currently trying to write my code so that the user can search for the header line with series name first and then print out just the following n1+1 lines that represent the data associated with the series. Here's what I have come up with so far: import re print fname = raw_input("Enter filename: ") seriesname = raw_input("Enter series: ") def findcounter(fname, seriesname): logfile = open(fname, "r") pat = 'INFO Number of teams :' for line in logfile: if seriesname in line: if pat in line: s=line pattern = re.compile(r"""(?P<name>.*?) #starting name \s*INFO #whitespace and success \s*Number\s*of\s*teams #whitespace and strings \s*\:\s*(?P<n1>.*)""",re.VERBOSE) match = pattern.match(s) name = match.group("name") n1 = int(match.group("n1")) print name + " has " + str(n1) + " teams" lcount = 0 for line in logfile: if line.startswith(name): if pat in line: while lcount <= n1: s.append(line) lcount += 1 return result The first part of my code works; it matches the header line that the person searches for, parses the line, and then prints out how many teams are in that series. Since the header line basically tells me how many lines are in the table, I thought that I could use that information to construct a loop that would continue printing each line until a set counter reached n1. But I've tried running it, and I realize that the way I've set it up so far isn't correct. So here's my question: How do you return a number of lines after a matched line when given the number of desired lines that follow the match? I'm new to programming, and I apologize if this question seems silly. I have been working on this quite diligently with no luck and would appreciate any help.

    Read the article

  • Large File Download - Connection With Server Reset

    - by daveywc
    I have an asp.net website that allows the user to download largish files - 30mb to about 60mb. Sometimes the download works fine but often it fails at some varying point before the download finishes with the message saying that the connection with the server was reset. Originally I was simply using Server.TransmitFile but after reading up a bit I am now using the code posted below. I am also setting the Server.ScriptTimeout value to 3600 in the Page_Init event. private void DownloadFile(string fname, bool forceDownload) { string path = MapPath(fname); string name = Path.GetFileName(path); string ext = Path.GetExtension(path); string type = ""; // set known types based on file extension if (ext != null) { switch (ext.ToLower()) { case ".mp3": type = "audio/mpeg"; break; case ".htm": case ".html": type = "text/HTML"; break; case ".txt": type = "text/plain"; break; case ".doc": case ".rtf": type = "Application/msword"; break; } } if (forceDownload) { Response.AppendHeader("content-disposition", "attachment; filename=" + name.Replace(" ", "_")); } if (type != "") { Response.ContentType = type; } else { Response.ContentType = "application/x-msdownload"; } System.IO.Stream iStream = null; // Buffer to read 10K bytes in chunk: byte[] buffer = new Byte[10000]; // Length of the file: int length; // Total bytes to read: long dataToRead; try { // Open the file. iStream = new System.IO.FileStream(path, System.IO.FileMode.Open, System.IO.FileAccess.Read, System.IO.FileShare.Read); // Total bytes to read: dataToRead = iStream.Length; //Response.ContentType = "application/octet-stream"; //Response.AddHeader("Content-Disposition", "attachment; filename=" + filename); // Read the bytes. while (dataToRead > 0) { // Verify that the client is connected. if (Response.IsClientConnected) { // Read the data in buffer. length = iStream.Read(buffer, 0, 10000); // Write the data to the current output stream. Response.OutputStream.Write(buffer, 0, length); // Flush the data to the HTML output. Response.Flush(); buffer = new Byte[10000]; dataToRead = dataToRead - length; } else { //prevent infinite loop if user disconnects dataToRead = -1; } } } catch (Exception ex) { // Trap the error, if any. Response.Write("Error : " + ex.Message); } finally { if (iStream != null) { //Close the file. iStream.Close(); } Response.Close(); } }

    Read the article

  • union marshalling issue in C#

    - by senthil
    I have union inside structure and the structure looks like struct tDeviceProperty { DWORD Tag; DWORD Size; union _DP value; }; typedef union _DP { short int i; LONG l; ULONG ul; float flt; double dbl; BOOL b; double at; FILETIME ft; LPSTR lpszA; LPWSTR lpszW; LARGE_INTEGER li; struct tBinary bin; BYTE reserved[40]; } __UDP; struct tBinary { ULONG size; BYTE * bin; }; from the tBinary structure bin has to be converted to tImage (structure is given below) struct tImage { DWORD x; DWORD y; DWORD z; DWORD Resolution; DWORD type; DWORD ID; diccid_t SourceID; const void *buffer; const char *Info; const char *UserImageID; }; to use the same in c# I have done marshaling but not giving proper values when converting the pointer to structure. The C# code is follows, tBinary tBin = new tBinary(); IntPtr tBinbuffer = Marshal.AllocCoTaskMem(Marshal.SizeOf(tBin)); Marshal.StructureToPtr(tBin.bin, tBinbuffer, false); tDeviceProperty tDevice = new tDeviceProperty(); tDevice.bin = tBinbuffer; IntPtr tDevicebuffer = Marshal.AllocCoTaskMem(Marshal.SizeOf(tDevice)); Marshal.StructureToPtr(tDevice.bin, tDevicebuffer, false); Battary tbatt = new Battary(); tbatt.value = tDevicebuffer; IntPtr tbattbuffer = Marshal.AllocCoTaskMem(Marshal.SizeOf(tbatt)); Marshal.StructureToPtr(tbatt.value, tbattbuffer, false); result = GetDeviceProperty(ref tbattbuffer); Battary v = (Battary)Marshal.PtrToStructure(tbattbuffer, typeof(Battary)); tDeviceProperty v2 = (tDeviceProperty)Marshal.PtrToStructure(tDevicebuffer, typeof(tDeviceProperty)); tBinary v3 = (tBinary)Marshal.PtrToStructure(tBinbuffer, typeof(tBinary));

    Read the article

  • JSON or YAML encoding in GWT/Java on both client and server

    - by KennethJ
    I'm looking for a super simple JSON or YAML library (not particularly bothered which one) written in Java, and can be used in both GWT on the client, and in its original Java form on the server. What I'm trying to do is this: I have my models, which are shared between the client and the server, and these are the primary source of data interchange. I want to design the web service in between to be as simple as possible, and decided to take the RESTful approach. My problem is that I know our application will grow substantially in the future, and writing all the getters, setters, serialization, factories, etc. by hand fills me with absolute dread. So in order to avoid it, I decided to implement annotations to keep track of attributes on the models. The reason I can't just serialize everything directly, using GWT's own one, or one which works through reflection, is because we need a certain amount of logic going on in the serialization process. I.e. whether references to other models get serialized during the serialization of the original model, or whether an ID is just passed, and general simple things like that. I've then written an annotation processor to preprocess my shared models and generate an implementing class with all the getters, setters, serialization, lazy-loading, etc. To make a long story short, I need some type of simple YAML or JSON library, which allows me to encode and decode manually, so I can generate this code through my annotation processor. I have had a look around the interwebs, but every single one I ran into supported some reflection which, while all fine and dandy, make it pretty much useless for GWT. And in the case of GWT's own JSON library, it uses JSNI for speed purposes, making it useless server side. One solution I did think about involved writing writing two sets of serialization methods on the models, one for the client and one for the server, but I'd rather not do that. Also, I'm pretty new to GWT, and even though I have done a lot of Java, it was back in the 1.2 days, so it's a bit rusty. So if you think I'm going about this problem completely the wrong way, I'm open to suggestions.

    Read the article

  • How to define an extern, C struct returning function in C++ using MSVC?

    - by DK
    The following source file will not compile with the MSVC compiler (v15.00.30729.01): /* stest.c */ #ifdef __cplusplus extern "C" { #endif struct Test; extern struct Test make_Test(int x); struct Test { int x; }; extern struct Test make_Test(int x) { struct Test r; r.x = x; return r; } #ifdef __cplusplus } #endif Compiling with cl /c /Tpstest.c produces the following error: stest.c(8) : error C2526: 'make_Test' : C linkage function cannot return C++ class 'Test' stest.c(6) : see declaration of 'Test' Compiling without /Tp (which tells cl to treat the file as C++) works fine. The file also compiles fine in DigitalMars C and GCC (from mingw) in both C and C++ modes. I also used -ansi -pedantic -Wall with GCC and it had no complaints. For reasons I will go into below, we need to compile this file as C++ for MSVC (not for the others), but with functions being compiled as C. In essence, we want a normal C compiler... except for about six lines. Is there a switch or attribute or something I can add that will allow this to work? The code in question (though not the above; that's just a reduced example) is being produced by a code generator. As part of this, we need to be able to generate floating point nans and infinities as constants (long story), meaning we have to compile with MSVC in C++ mode in order to actually do this. We only found one solution that works, and it only works in C++ mode. We're wrapping the code in extern "C" {...} because we want to control the mangling and calling convention so that we can interface with existing C code. ... also because I trust C++ compilers about as far as I could throw a smallish department store. I also tried wrapping just the reinterpret_cast line in extern "C++" {...}, but of course that doesn't work. Pity. There is a potential solution I found which requires reordering the declarations such that the full struct definition comes before the function foward decl., but this is very inconvenient due to the way the codegen is performed, so I'd really like to avoid having to go down that road if I can.

    Read the article

  • Working with hibernate/DAO problems

    - by Gandalf StormCrow
    Hello everyone here is my DAO class : public class UsersDAO extends HibernateDaoSupport { private static final Log log = LogFactory.getLog(UsersDAO.class); protected void initDao() { //do nothing } public void save(User transientInstance) { log.debug("saving Users instance"); try { getHibernateTemplate().saveOrUpdate(transientInstance); log.debug("save successful"); } catch (RuntimeException re) { log.error("save failed", re); throw re; } } public void update(User transientInstance) { log.debug("updating User instance"); try { getHibernateTemplate().update(transientInstance); log.debug("update successful"); } catch (RuntimeException re) { log.error("update failed", re); throw re; } } public void delete(User persistentInstance) { log.debug("deleting Users instance"); try { getHibernateTemplate().delete(persistentInstance); log.debug("delete successful"); } catch (RuntimeException re) { log.error("delete failed", re); throw re; } } public User findById( java.lang.Integer id) { log.debug("getting Users instance with id: " + id); try { User instance = (User) getHibernateTemplate() .get("project.hibernate.Users", id); return instance; } catch (RuntimeException re) { log.error("get failed", re); throw re; } } } Now I wrote a test class(not a junit test) to test is everything working, my user has these fields in the database : userID which is 5characters long string and unique/primary key, and fields such as address, dob etc(total 15 columns in database table). Now in my test class I intanciated User added the values like : User user = new User; user.setAddress("some address"); and so I did for all 15 fields, than at the end of assigning data to User object I called in DAO to save that to database UsersDao.save(user); and save works just perfectly. My question is how do I update/delete users using the same logic? Fox example I tried this(to delete user from table users): User user = new User; user.setUserID("1s54f"); // which is unique key for users no two keys are the same UsersDao.delete(user); I wanted to delete user with this key but its obviously different can someone explain please how to do these. thank you

    Read the article

  • Jquery $.post and PHP - Prevent the ability to use script outside of main website.

    - by Tim
    I have a PHP script setup using Jquery $.post which would return a response or do an action within the targeted .php file within $.post. Eg. My page has a form where you type in your Name. Once you hit the submit form button, $.post is called and sends the entered Name field value into "mywebsite.xyz/folder/ajaxscript.php" If a user was to visit "mywebsite.xyz/folder/ajaxscript.php" directly and somehow POST the data to the script, the script would return a response / do an action, based on the submitted POST data. The problem is, I don't want others to be able to periodically "call" an action or request a response from my website without using the website directly. Theoretically, right now you could determine what Name values my website allows without even visiting it, or you could call an action without going through the website, by simply visiting "mywebsite.xyz/folder/ajaxscript.php" So, what measures can I take to prevent this from happening? So far my idea is to ensure that it is a $_POST and not a $_GET - so they cannot manually enter it into the browser, but they could still post data to the script... Another measure is to apply a session key that expires, and is only valid for X amount of visits until they revisit the website. ~ Or, just have a daily "code" that changes and they'd need to grab this code from the website each day to keep their direct access to the script working (eg. I pass the daily "code" into each post request. I then check that code matches in the ajax php script.) However, even with these meaures, they will STILL have access to the scripts so long as they know how to POST the data, and also get the new code each day. Also, having a daily code requirement will cause issues when visiting the site at midnight (12:00am) as the code will change and the script will break for someone who is on the website trying to call the script, with the invalid code being passed still. I have attempted using .htaccess however using: order allow,deny deny from all Prevents legitimate access, and I'd have to add an exception so the website's IP is allowed to access it.. which is a hassle to update I think. Although, if it's the only legitimate solution I guess I'll have to. If I need to be more clear please let me know.

    Read the article

  • What are the weaknesses of this user authentication method?

    - by byronh
    I'm developing my own PHP framework. It seems all the security articles I have read use vastly different methods for user authentication than I do so I could use some help in finding security holes. Some information that might be useful before I start. I use mod_rewrite for my MVC url's. Passwords are sha1 and md5 encrypted with 24 character salt unique to each user. mysql_real_escape_string and/or variable typecasting on everything going in, and htmlspecialchars on everything coming out. Step-by step process: Top of every page: session_start(); session_regenerate_id(); If user logs in via login form, generate new random token to put in user's MySQL row. Hash is generated based on user's salt (from when they first registered) and the new token. Store the hash and plaintext username in session variables, and duplicate in cookies if 'Remember me' is checked. On every page, check for cookies. If cookies set, copy their values into session variables. Then compare $_SESSION['name'] and $_SESSION['hash'] against MySQL database. Destroy all cookies and session variables if they don't match so they have to log in again. If login is valid, some of the user's information from the MySQL database is stored in an array for easy access. So far, I've assumed that this array is clean so when limiting user access I refer to user.rank and deny access if it's below what's required for that page. I've tried to test all the common attacks like XSS and CSRF, but maybe I'm just not good enough at hacking my own site! My system seems way too simple for it to actually be secure (the security code is only 100 lines long). What am I missing? I've also spent alot of time searching for the vulnerabilities with mysql_real_escape string but I haven't found any information that is up-to-date (everything is from several years ago at least and has apparently been fixed). All I know is that the problem was something to do with encoding. If that problem still exists today, how can I avoid it? Any help will be much appreciated.

    Read the article

  • iPhone Image Resources, ICO vs PNG, app bundle filesize

    - by Jasarien
    My application has a collection of around 1940 icons that are used throughout. They're currently in ICO and new images provided to me come in ICO format too. I have noticed that they contain a 16x16 and 32x32 representation of each icon in one file. Each file is roughly 4KB in filesize (as reported by finder, but ls reports that they vary from being ~1000 bytes to 5000 bytes) A very small number of these icons only contain the 32x32 representation, and as a result are only around 700 bytes in size. Currently I am bundling these icons with my application and they are inflating the size of the app a bit more than I would like. Altogether, the images total just about 25.5MB. Xcode must do some kind of compression because the resulting app bundle is about 12.4MB. Compressing this further into a ZIP (as it would be when submitted to the App Store), results in a final file of 5.8MB. I'm aware that the maximum limit for over the air App Store downloads has been raised to 20MB since the introduction of the iPad (I'm not sure if that extends to iPhone apps as well as iPad apps though, if not the limit would be 10MB). My worry is that new icons are going to be added (sometimes up to 10 icons per week), and will continue to inflate the app bundle over time. What is the best way to distribute these icons with my app? Things I've tried and not had much success with: Converting the icons from ICO to PNG: I tried this in the hopes that the pngcrush utility would help out with the filesize. But it appears that it doesn't make much of a difference between a normal PNG and a crushed png (I believe it just optimises the image for display on the iPhone's GPU rather than compress it's size). Also in going from ICO to PNG actually increased the size of the icon file... Zipping the images, and then uncompressing them on first run. While this did reduce the overall image sizes, I found that the effort needed to unzip them, copy them to the documents folder and ensure that duplication doesn't happen on upgrades was too much hassle to be worth the benefit. Also, on original and 3G iPhones unzipping and copying around 25MB of images takes too long and creates a bad experience... Things I've considered but not yet tried: Instead of distributing the icons within the app bundle, host them online, and download each icon on demand (it depends on the user's data as to which icons will actually be displayed and when). Issues with this is that bandwidth costs money, and image downloads will be bandwidth intensive. However, my app currently has a small userbase of around 5,500 users (of which I estimate around 1500 to be active based on Flurry stats), and I have a huge unused bandwidth allowance with my current hosting package. So I'm open to thoughts on how to solve this tricky issue.

    Read the article

  • Smoke testing a .NET web application

    - by pdr
    I cannot believe I'm the first person to go through this thought process, so I'm wondering if anyone can help me out with it. Current situation: developers write a web site, operations deploy it. Once deployed, a developer Smoke Tests it, to make sure the deployment went smoothly. To me this feels wrong, it essentially means it takes two people to deploy an application; in our case those two people are on opposite sides of the planet and timezones come into play, causing havoc. But the fact remains that developers know what the minimum set of tests is and that may change over time (particularly for the web service portion of our app). Operations, with all due respect to them (and they would say this themselves), are button-pushers who need a set of instructions to follow. The manual solution is that we document the test cases and operations follow that document each time they deploy. That sounds painful, plus they may be deploying different versions to different environments (specifically UAT and Production) and may need a different set of instructions for each. On top of this, one of our near-future plans is to have an automated daily deploy environment, so then we'll have to instruct a computer as to how to deploy a given version of our app. I would dearly like to add to that instructions for how to smoke test the app. Now developers are better at documenting instructions for computers than they are for people, so the obvious solution seems to be to use a combination of nUnit (I know these aren't unit tests per se, but it is a built-for-purpose test runner) and either the Watin or Selenium APIs to run through the obvious browser steps and call to the web service and explain to the Operations guys how to run those unit tests. I can do that; I have mostly done it already. But wouldn't it be nice if I could make that process simpler still? At this point, the Operations guys and the computer are going to have to know which set of tests relate to which version of the app and tell the nUnit runner which base URL it should point to (say, www.example.com = v3.2 or test.example.com = v3.3). Wouldn't it be nicer if the test runner itself had a way of giving it a base URL and letting it download say a zip file, unpack it and edit a configuration file automatically before running any test fixtures it found in there? Is there an open source app that would do that? Is there a need for one? Is there a solution using something other than nUnit, maybe Fitnesse? For the record, I'm looking at .NET-based tools first because most of the developers are primarily .NET developers, but we're not married to it. If such a tool exists using other languages to write the tests, we'll happily adapt, as long as there is a test runner that works on Windows.

    Read the article

  • Reading and writing C++ vector to a file

    - by JB
    For some graphics work I need to read in a large amount of data as quickly as possible and would ideally like to directly read and write the data structures to disk. Basically I have a load of 3d models in various file formats which take too long to load so I want to write them out in their "prepared" format as a cache that will load much faster on subsequent runs of the program. Is it safe to do it like this? My worries are around directly reading into the data of the vector? I've removed error checking, hard coded 4 as the size of the int and so on so that i can give a short working example, I know it's bad code, my question really is if it is safe in c++ to read a whole array of structures directly into a vector like this? I believe it to be so, but c++ has so many traps and undefined behavour when you start going low level and dealing directly with raw memory like this. I realise that number formats and sizes may change across platforms and compilers but this will only even be read and written by the same compiler program to cache data that may be needed on a later run of the same program. #include <fstream> #include <vector> using namespace std; struct Vertex { float x, y, z; }; typedef vector<Vertex> VertexList; int main() { // Create a list for testing VertexList list; Vertex v1 = {1.0f, 2.0f, 3.0f}; list.push_back(v1); Vertex v2 = {2.0f, 100.0f, 3.0f}; list.push_back(v2); Vertex v3 = {3.0f, 200.0f, 3.0f}; list.push_back(v3); Vertex v4 = {4.0f, 300.0f, 3.0f}; list.push_back(v4); // Write out a list to a disk file ofstream os ("data.dat", ios::binary); int size1 = list.size(); os.write((const char*)&size1, 4); os.write((const char*)&list[0], size1 * sizeof(Vertex)); os.close(); // Read it back in VertexList list2; ifstream is("data.dat", ios::binary); int size2; is.read((char*)&size2, 4); list2.resize(size2); // Is it safe to read a whole array of structures directly into the vector? is.read((char*)&list2[0], size2 * sizeof(Vertex)); }

    Read the article

< Previous Page | 636 637 638 639 640 641 642 643 644 645 646 647  | Next Page >