Search Results

Search found 65101 results on 2605 pages for 'big data'.

Page 641/2605 | < Previous Page | 637 638 639 640 641 642 643 644 645 646 647 648  | Next Page >

• Sony VAIO is booting directly into Windows without showing grub

  - by Rohan Dhruva

  I bought a new Sony Vaio S series laptop. It uses Insyde H2O BIOS EFI, and trying to install Linux on it is driving me crazy. root@kubuntu:~# parted /dev/sda print Model: ATA Hitachi HTS72756 (scsi) Disk /dev/sda: 640GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 274MB 273MB fat32 EFI system partition hidden 2 274MB 20.8GB 20.6GB ntfs Basic data partition hidden, diag 3 20.8GB 21.1GB 273MB fat32 EFI system partition boot 4 21.1GB 21.3GB 134MB Microsoft reserved partition msftres 5 21.3GB 342GB 320GB ntfs Basic data partition 6 342GB 358GB 16.1GB ext4 Basic data partition 7 358GB 374GB 16.1GB ntfs Basic data partition 8 374GB 640GB 266GB ntfs Basic data partition What is surprising is that there are 2 EFI system partitions on the disk. The sda2 partition is a 20gb recovery partition which loads windows with a basic recovery interface. This is accessible by pressing the "ASSIST" button as opposed to the normal power button. I presume that the sda1 EFI System Partition (ESP) loads into this recovery. The sda3 ESP has more fleshed out entries for Microsoft Windows, which actually goes into Windows 7 (as confirmed by bcdedit.exe on Windows). Ubuntu is installed on sda6, and while installation I chose sda3 as my boot partition. The installer correctly created a sda3/EFI/ubuntu/grubx64.efi application. The real problem: for the life of me, I can't set it to be the default! I tried creating a sda3/startup.nsh which called grubx64.efi, but it didn't help -- on rebooting, the system still boots into windows. I tried using efibootmgr, and that shows as it it worked: root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager root@kubuntu:~# efibootmgr --create --gpt --disk /dev/sda --part 3 --write-signature --label "GRUB2" --loader "\\EFI\\ubuntu\\grubx64.efi" BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 root@kubuntu:~# efibootmgr BootCurrent: 0000 BootOrder: 0002,0000,0001 Boot0000* EFI USB Device Boot0001* Windows Boot Manager Boot0002* GRUB2 However, on rebooting, as you guessed, the machine rebooted directly back into Windows. The only things I can think of are: The sda1 partition is somehow being used Overwrite /EFI/Boot/bootx64.efi and /EFI/Microsoft/Boot/bootmgfw.efi with grubx64.efi [but this seems really radical]. Can anyone please help me out? Thanks -- any help is greatly appreciated, as this issue is driving me crazy!

  Read the article

• Commandline Purge in AS11

  - by Dheeraj Kumar

  AS11 - B2B offering consists of numerous features that have been made available via commandline approach. Most of these are supplement to the already available User Interface based approach. One such is purging of runtime data. The commandline purge option enables the users to purge the runtime data, based on various criteria. This is an ANT based command, provides the flexibility to selectively set the criteria to purge the runtime data. Providing the command line option also enables the administrator to purge in bulk, without visiting the B2B UI, which can also be used for automation purpose By default archival is turned on for purge activity. As a pre-requisite, the respective folder needs to be configured in database with the proper permission. When no filename is provided for archived data, the sysdate will be considered for filename. Below are the various options to purge the runtime data Normal 0 Option ANT option   Message state -Dmsgstate   Date range -Dfromdate,  -Dtodate Format : dd/mm/yyyy hh:mm AM/PM Trading partner -Dtp   Direction -Ddirection   Message Type -Dmsgtype   Agreement Name -Dagreement   IdType/ value -Didtype,  -Didvalue   Archive -Darchive True/false By default true Archive file name -Darchivename File name (optional), will be used when archive is set to true. Normal 0 Note: When using -Darchivename the value must be a unique file name. An existing file name used with -Darchivename throws an exception v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 Below are the few of ant commands and various options.   Purge based on date range and message state: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Dfromdate="19/12/2009 1:04 AM" -Dtodate="19/12/2009 1:05 AM" -Dmsgstate=MSG_COMPLETE -Darchivename="filename.dmp"  Purge based on direction: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Ddirection="OUTBOUND" Normal 0 Purge based on agreement Name: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Dagreement="agreement_name" Normal 0 Purge based on Trading partner Name: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Dtp=GlobalChips Normal 0 Purge based on Message State: Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Dmsgstate="MSG_COMPLETE" Normal 0 ant -f ant-b2b-util.xml b2bpurge -Dmode=RT -Ddirection="OUTBOUND" -Dmsgstate="MSG_COMPLETE"

  Read the article

• SSIS and StreamInsight Working Together.

  I have been thinking a lot recently about what it would be like to have StreamInsight and SSIS working together.  Well the CAT team have produced a paper on some of our options here. Here are some of my thoughts. There is of course a slight mismatch in their types of usage.  StreamInsight is an Event Stream processing engine capable of operating on new data in the sub second timeframe.  The engine allows you to do real time analytics and take decisions on events that have potentially only just happened.  SSIS on the other hand is a batch processing engine.  In general I do not like having to invoke the same package more than once every 90 seconds or so as it can start to get expensive.  Usually when doing batch processing we have an hour or longer of grace before we have to move data from A –> B. StreamInsight operates on streams of data.  Before anyone mentions it yes I know StreamInsight is equally adept at using the IEnumerable interface, but I would argue live streaming and real-time analytics is a primary goal of the product.  SSIS does not have an “Always On” button I do not like the idea of embedding StreamInsight inside SSIS using a transform particularly.  It means StreamInsight becomes a batch processing engine because it can only operate when the SSIS package is running and SSIS is in charge of when that happens. If I am to have StreamInsight within SSIS then I prefer to have StreamInsight on the adapters.  This way you can force the adapters to stay open and introduce events into your Pipeline.   SSIS has a much richer set of transforms out of the box than StreamInsight.  Although “Always On” was not a design goal of SSIS I have used it like this and it works just fine. SSIS being called from within StreamInsight, now that excites me.  see below   For a while now I have been thinking what it would be like to decouple the Data Flow task from the SSIS package and expose it as something with which you can interact.  Anything can instantiate this version of a DFT as it would expose one or more  input interfaces and one or more output interfaces.  I can imagine that this would be a big hit when moving to “The Cloud” as well.  I could see the Data Flow task maybe being hosted in Azure Appfabric or some such layer. StreamInsight would be able to take advantage of this as well.   I am interested to see where this goes and will be pressing for more meat around the subject when I visit Redmond soon.

  Read the article

• Recipient address rejected: User unknown in local recipient table;

  - by Thufir

  I've gone through the guide for mailman with some difficulty, but seem to be nearly there. I'm able to navigate to the mailman web GUI, create lists and subscribe. I just subscribe my local FQDN, so [email protected] for testing purposes. This FQDN only works on localhost. However, e-mails to the list address, in this case [email protected], are rejected: root@dur:~# root@dur:~# tail /var/log/mail.log Aug 28 08:28:43 dur postfix/master[12208]: terminating on signal 15 Aug 28 08:28:44 dur postfix/postfix-script[12322]: starting the Postfix mail system Aug 28 08:28:44 dur postfix/master[12323]: daemon started -- version 2.9.1, configuration /etc/postfix Aug 28 08:28:46 dur postfix/postfix-script[12332]: stopping the Postfix mail system Aug 28 08:28:46 dur postfix/master[12323]: terminating on signal 15 Aug 28 08:28:47 dur postfix/postfix-script[12437]: starting the Postfix mail system Aug 28 08:28:47 dur postfix/master[12438]: daemon started -- version 2.9.1, configuration /etc/postfix Aug 28 08:29:29 dur postfix/smtpd[12460]: connect from localhost[127.0.0.1] Aug 28 08:29:30 dur postfix/smtpd[12460]: NOQUEUE: reject: RCPT from localhost[127.0.0.1]: 550 5.1.1 <[email protected]>: Recipient address rejected: User unknown in local recipient table; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<dur.bounceme.net> Aug 28 08:29:33 dur postfix/smtpd[12460]: disconnect from localhost[127.0.0.1] root@dur:~# root@dur:~# ll /var/lib/mailman/data/ total 56 drwxrwsr-x 2 root list 4096 Aug 28 08:28 ./ drwxrwsr-x 8 root list 4096 Aug 27 19:58 ../ -rw-r--r-- 1 root list 0 Aug 28 04:36 aliases -rw-r--r-- 1 root list 12288 Aug 28 04:36 aliases.db -rw-r--r-- 1 root list 12288 Aug 28 08:28 aliases.db.db -rw-r----- 1 root list 41 Aug 27 21:04 creator.pw -rw-rw-r-- 1 root list 10 Aug 27 19:58 last_mailman_version -rw-r--r-- 1 root list 14100 Oct 19 2011 sitelist.cfg root@dur:~# root@dur:~# grep alias /etc/postfix/main.cf alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases alias_database = hash:/var/lib/mailman/data/aliases.db #alias_database = hash:/etc/aliases root@dur:~# root@dur:~# postconf -n alias_database = hash:/var/lib/mailman/data/aliases.db alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix default_transport = smtp home_mailbox = Maildir/ inet_interfaces = loopback-only mailbox_command = /usr/lib/dovecot/deliver -c /etc/dovecot/conf.d/01-mail-stack-delivery.conf -m "${EXTENSION}" mailbox_size_limit = 0 mailman_destination_recipient_limit = 1 mydestination = $myhostname localhost.$mydomain localhost $mydomain myhostname = dur.bounceme.net mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 readme_directory = no recipient_delimiter = + relay_domains = lists.example.com relay_transport = relay relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/dovecot-auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/ssl/certs/ssl-mail.pem smtpd_tls_key_file = /etc/ssl/private/ssl-mail.key smtpd_tls_mandatory_ciphers = medium smtpd_tls_mandatory_protocols = SSLv3, TLSv1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes tls_random_source = dev:/dev/urandom transport_maps = hash:/etc/postfix/transport root@dur:~# Why is this e-mail rejected? It seems to, maybe be related to the alias_maps and alias_database settings in postfix.

  Read the article

• links for 2011-02-08

  - by Bob Rhubart

  When It Comes to Data Integration, Oracle Is the Right Choice (tags: ping.fm) When It Comes to Data Integration, Oracle Is the Right Choice (tags: ping.fm) Webcast: Webcast: Deploy Oracle VM Templates for Oracle E-Business Suite and Oracle PeopleSoft Enterprise Applications. Feb 15. Event Date: 02/15/2011 9:00am PT / Noon ET. Featured Speakers: Adam Hawley (Oracle Senior Director, Product Management, Virtualization), Ivo Dujmovic (Oracle Director, Technology Integration), Greg Kelly (Oracle Product Strategy Manager - PeopleTools). (tags: oracle virtualization peoplesoft) Webcast: Managing Oracle Exadata with Oracle Enterprise Manager 11g Thursday, February 10, 2011 - 10 a.m. PT/1 p.m. ET. Ask Oracle experts questions and learn firsthand how to efficiently manage all stages of Oracle Exadata’s lifecycle, from testing to deployment. (tags: oracle exalogic enterprisemanager) Arthur Cole: Winning the Consolidated Data Center Future | ITBusinessEdge.com "According to InformationWeek, the amount of data under management is increasing by about 20 percent per year, with some organizations having to deal with 50 percent or more. That means capacity needs to double every two or three years." - Arthur Cole (tags: dataconsolidation enterprisearchitecture) Transformation of Product Management in Telecommunications for Rapid Launch of Next Generation Products (Telecommunications Architecture Corner) Raul Goycoolea's post examines "how enterprise product management enabled by PLM-based product catalogue solutions helps to launch next generation products rapidly in the context of the Telecommunication Industry." (tags: oracle otn enterprisearchitecture) Richard Veryard on Architecture: What is an EA vendor? "Even some people who insist that enterprise architecture shouldn't be thought of as merely software architecture seem to think that 'tools' only means 'software tools.'" - Richard Veryard (tags: enterprisearchitecture) MDM for Tax Authorities (Oracle Master Data Management) "Tax Authorities face a multitude of IT challenges," says David Butler. "Compounding these issues is the fact that the IT architectures in operation at most revenue and collections agencies are very complex." (tags: oracle otn MDM ITarchitecture) Bernard Golden: How Cloud Computing Changes IT Staffs | CIO.com | CIO.com "Enterprise architects become more important" tops Bernard's list of changes. (tags: cloudcomputing staffing cio enterprisearchitecture) Martijn Linssen: Social Enterprise Magic Quadrant "Revolutions usually go wrong, where evolutions usually go right." - Martijn Linssen (tags: socialcomputing enterprise2.0) Why Do IT Roles Fail? | CIO "The roles that come up most often are the ones that are not directly building or maintaining systems. These include architecture, planning, vendor management, relationship management, PMO, and security." - Marc Cecere (tags: softwarearchitecture technologyroles) We're Hiring! - Server and Desktop Virtualization Product Management (Oracle's Virtualization Blog) Adam Hawley with information on an opportunity for qualified job seekers. (tags: oracle otn employment virtualization)

  Read the article

• Happy New Year! Upcoming Events in January 2011

  - by mandy.ho

  Oracle Database kicks off the New Year at the following events during the month of January. Hope to see you there and please send in your pictures and feedback! Jan 20, 2011 - San Francisco, CA LinkShare Symposium West 2011 Oracle is a proud Gold Sponsor at the LinkShare Symposium West 2011 January 20 in San Francisco, California. Year after year LinkShare has been bringing their network the opportunity to come to life. At the LinkShare Symposium online performance marketing leaders meet to optimize face-to-face during a full day of networking. Learn more by attending Oracle Breakout Session, "Omni - Channel Retailing, What is possible now?" on Thursday, January 20, 11:15 a.m. - 12:00 noon, Grand Ballroom. http://eventreg.oracle.com/webapps/events/ns/EventsDetail.jsp?p_eventId=128306&src=6954634&src=6954634&Act=397 Jan 24, 2011 - Cincinnati, OH Greater Cincinnati Oracle User Group Meeting "Tom Kyte Day" - Featuring a day of sessions presented by Senior Technical Architect, Tom Kyte. Sessions include "Top 10, no 11, new features of Oracle Database 11g Release 2" and "What do I really need to know when upgrading", plus more. http://www.gcoug.org/ Jan 25, 2011 - Vancouver, British Columbia Oracle Security Solutions Forum Featuring a Special Keynote Presentation from Tom Kyte - Complete Database Security Join us at this half-day event; Oracle Database Security Solutions: Complete Information Security. Learn how Oracle Database Security solutions help you: • Prevent external threats like SQL injection attacks from reaching your databases • Transparently encrypt application data without application changes • Prevent privileged database users and administrators from accessing data • Use native database auditing to monitor and report on database activity • Mask production data for safe use in nonproduction environments http://eventreg.oracle.com/webapps/events/ns/EventsDetail.jsp?p_eventId=126974&src=6958351&src=6958351&Act=97 Jan 26, 2011 - Halifax, Nova Scotia Oracle Database Security Technology Day Exclusive Seminar on Complete Information Security with Oracle Database 11g The amount of digital data within organizations is growing at unprecedented rates, as is the value of that data and the challenges of safeguarding it. Yet most IT security programs fail to address database security--specifically, insecure applications and privileged users. So how can you protect your mission-critical information? Avoid risky third-party solutions? Defend against security breaches and compliance violations? And resist costly new infrastructure investments? Join us at this half-day seminar, Oracle Database Security Solutions: Complete Information Security, to find out http://eventreg.oracle.com/webapps/events/ns/EventsDetail.jsp?p_eventId=126269&src=6958351&src=6958351&Act=93

  Read the article

• Suggestions for connecting .NET WPF GUI with Java SE Server

  - by Sam Goldberg

  BACKGROUND We are building a Java (SE) trading application which will be monitoring market data and sending trade messages based on the market data, and also on user defined configuration parameters. We are planning to provide the user with a thin client, built in .NET (WPF) for managing the parameters, controlling the server behavior, and viewing the current state of the trading. The client doesn't need real-time updates; it will instead update the view once every few seconds (or whatever interval is configured by the user). The client has about 6 different operations it needs to perform with the server, for example: CRUD with configuration parameters query subset of the data receive updates of current positions from server It is possible that most of the different operations (except for receiving data) are just different flavors of managing the configuration parameters, but it's too early in our analysis for us to be sure. To connect the client with the server, we have been considering using: SOAP Web Service RESTful service building a custom TCP/IP based API (text or xml) (least preferred - but we use this approach with other applications we have) As best as I understand, pros and cons of the different web service flavors are: SOAP pro: totally automated in .NET (and Java), modifying server side interface require no code changes in communication layer, just running refresh on Web Service reference to regenerate the classes. con: more overhead in the communication layer sending more text, etc. We're not using J2EE container so maybe doesn't work so well with J2SE REST pro: lighter weight, less data. Has good .NET and Java support. (I don't have any real experience with this, so don't know what other benefits it has.) con: client will not be automatically aware if there are any new operations or properties added (?), so communication layer needs to be updated by developer if server interface changes. con: (both approaches) Server cannot really push updates to the client at regular intervals (?) (However, we won't mind if client polls the server to get updates.) QUESTION What are your opinions on the above options or suggestions for other ways to connect the 2 parts? (Ideally, we don't want to put much work into the communication layer, because it's not the significant part of the application so the more off-the-shelf and automated the better.)

  Read the article

• Suggestions for connecting .NET WPF GUI with Java SE Server aoo

  - by Sam Goldberg

  BACKGROUND We are building a Java (SE) trading application which will be monitoring market data and sending trade messages based on the market data, and also on user defined configuration parameters. We are planning to provide the user with a thin client, built in .NET (WPF) for managing the parameters, controlling the server behavior, and viewing the current state of the trading. The client doesn't need real-time updates; it will instead update the view once every few seconds (or whatever interval is configured by the user). The client has about 6 different operations it needs to perform with the server, for example: CRUD with configuration parameters query subset of the data receive updates of current positions from server It is possible that most of the different operations (except for receiving data) are just different flavors of managing the configuration parameters, but it's too early in our analysis for us to be sure. To connect the client with the server, we have been considering using: SOAP Web Service RESTful service building a custom TCP/IP based API (text or xml) (least preferred - but we use this approach with other applications we have) As best as I understand, pros and cons of the different web service flavors are: SOAP pro: totally automated in .NET (and Java), modifying server side interface require no code changes in communication layer, just running refresh on Web Service reference to regenerate the classes. con: more overhead in the communication layer sending more text, etc. We're not using J2EE container so maybe doesn't work so well with J2SE REST pro: lighter weight, less data. Has good .NET and Java support. (I don't have any real experience with this, so don't know what other benefits it has.) con: client will not be automatically aware if there are any new operations or properties added (?), so communication layer needs to be updated by developer if server interface changes. con: (both approaches) Server cannot really push updates to the client at regular intervals (?) (However, we won't mind if client polls the server to get updates.) QUESTION What are your opinions on the above options or suggestions for other ways to connect the 2 parts? (Ideally, we don't want to put much work into the communication layer, because it's not the significant part of the application so the more off-the-shelf and automated the better.)

  Read the article

• How to build a 4x game?

  - by Marco

  I'm trying to study how succefully implement a 4x game. Area of interest: 1) map data: how to store stellars systems (graphs?), how to generate them and so on.. 2) multiplayer: how to organize code in a non graphical server and a client to display it 3) command system: what are patters to catch user and ai decisions and handle them, adding at first "explore" and "colonize" then "combat", "research", "spy" and so on (commands can affect ships, planets, research, etc..) 4) ai system: ai can use commands to expand, upgrade planets and ship I know is a big questions, so help is appreciated :D 1) Map data Best choice is have a graph to model a galaxy. A node is a stellar system and every system have a list of planets. Ship cannot travel outside of predefined paths, like in Ascendancy: http://www.abandonia.com/files/games/221/Ascendancy_2.png Every connection between two stellar systems have a cost, in turns. Generate a galaxy is only a matter of: - dimension: number of stellar systems, - variety: randomize number of planets and types (desertic, earth, etc..), - positions of each stellar system on game space - connections: assure that exist a path between every node, so graph is "connected" (not sure if this a matematically correct term) 2) Multiplayer Game is organized in turns: player 1, player 2, ai1, ai2. Server take care of all data and clients just diplay it and collect data change. Because is a turn game, latency is not a problem :D 3) Command system I would like to design a hierarchy of commands to take care of this aspect: abstract Genericcommand (target) ExploreCommand (Ship) extends genericcommand colonizeCommand (Ship) buildcommand(planet, object) and so on. In my head all this commands are stored in a queue for every planets, ships or reasearch center or spy, and each turn a command is sent to a server to apply command and change data state 4) ai system I don't have any idea about this. Is a big topic and what I want is a simple ai. Something like "expand and fight against everyone". I think about a behaviour tree to control ai moves, so I can develop an ai that try to build ships to expand and then colonize planets, upgrade them throught science and combat enemies. Could be done with a finite state machine too ? any ideas, resources, article are welcome!

  Read the article

• How to get tens of millions of pages indexed by Google bot?

  - by Chris Adragna

  We are currently developing a site that currently has 8 million unique pages that will grow to about 20 million right away, and eventually to about 50 million or more. Before you criticize... Yes, it provides unique, useful content. We continually process raw data from public records and by doing some data scrubbing, entity rollups, and relationship mapping, we've been able to generate quality content, developing a site that's quite useful and also unique, in part due to the breadth of the data. It's PR is 0 (new domain, no links), and we're getting spidered at a rate of about 500 pages per day, putting us at about 30,000 pages indexed thus far. At this rate, it would take over 400 years to index all of our data. I have two questions: Is the rate of the indexing directly correlated to PR, and by that I mean is it correlated enough that by purchasing an old domain with good PR will get us to a workable indexing rate (in the neighborhood of 100,000 pages per day). Are there any SEO consultants who specialize in aiding the indexing process itself. We're otherwise doing very well with SEO, on-page especially, besides, the competition for our "long-tail" keyword phrases is pretty low, so our success hinges mostly on the number of pages indexed. Our main competitor has achieved approx 20MM pages indexed in just over one year's time, along with an Alexa 2000-ish ranking. Noteworthy qualities we have in place: page download speed is pretty good (250-500 ms) no errors (no 404 or 500 errors when getting spidered) we use Google webmaster tools and login daily friendly URLs in place I'm afraid to submit sitemaps. Some SEO community postings suggest a new site with millions of pages and no PR is suspicious. There is a Google video of Matt Cutts speaking of a staged on-boarding of large sites, too, in order to avoid increased scrutiny (at approx 2:30 in the video). Clickable site links deliver all pages, no more than four pages deep and typically no more than 250(-ish) internal links on a page. Anchor text for internal links is logical and adds relevance hierarchically to the data on the detail pages. We had previously set the crawl rate to the highest on webmaster tools (only about a page every two seconds, max). I recently turned it back to "let Google decide" which is what is advised.

  Read the article

• Need help fixing DPKG errors after update from 12.04 to 12.10

  - by James Wulfe

  So I was doing fine then i upgraded my system to 12.10 and now i cant get my system to update all of its packages properly. no matter what i do, what is happening here and how do i fix this. if i would have thought 12.10 would be this much of a hassle i would have never upgraded..... here is a sampling of the code that returns from "apt-get -f install" It should also be noted that it is just these 6 packages only. no other packages have given me this kind of trouble. well i should say as of now. It was just 5, but them i got an update for unity, and now unity-common is added to the trouble makers. which prevents me from further upgrading the actual unity package as this package is a dependancy. Preparing to replace usb-modeswitch-data 20120120-0ubuntu1 (using .../usb-modeswitch-data_20120815-1_all.deb) ... /var/lib/dpkg/info/usb-modeswitch-data.prerm: 4: /var/lib/dpkg/info/usb-modeswitch-data.prerm: dpkg-maintscript-helper: Input/output error dpkg: warning: subprocess old pre-removal script returned error exit status 2 dpkg: trying script from the new package instead ... /var/lib/dpkg/tmp.ci/prerm: 4: /var/lib/dpkg/tmp.ci/prerm: dpkg-maintscript-helper: Input/output error dpkg: error processing /var/cache/apt/archives/usb-modeswitch-data_20120815-1_all.deb (--unpack): subprocess new pre-removal script returned error exit status 2 /var/lib/dpkg/info/usb-modeswitch-data.postinst: 7: /var/lib/dpkg/info/usb-modeswitch-data.postinst: dpkg-maintscript-helper: Input/output error dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/network-manager_0.9.6.0-0ubuntu7_i386.deb /var/cache/apt/archives/pcmciautils_018-8_i386.deb /var/cache/apt/archives/unity-common_6.10.0-0ubuntu2_all.deb /var/cache/apt/archives/whoopsie_0.2.7_i386.deb /var/cache/apt/archives/usb-modeswitch_1.2.3+repack0-1ubuntu3_i386.deb /var/cache/apt/archives/usb-modeswitch-data_20120815-1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I would also like to note i have cleaned apt cashe both through the terminal and manualy, i have tried installing them manually through dpkg from both the /var/cache/apt/archives/ location and from my own manually downloaded .deb files. i have tried using dpkg-reconfigure and i have used bleachbit to clean my system. I have also tested both my HDD and memory and found no significant errors to lead to the input/output errors. Quite frankly i am just out of options and have grown tired of trying to google a solution to this mess but still do not wish to pursue backing up settings and reinstalling the system. Any help would be appreciated. I am only interested in answers, please leave your feeling towards grammar, punctuation, and bias towards how a "post should look" at the door. If you dont have something to contribute towards solving my problem then you are just doing nothing but contributing to it. Thank you.

  Read the article

• Updating My Online Boggle Solver Using jQuery Templates and WCF

  With WebForms, each ASP.NET page's rendered output includes a <form> element that performs a postback to the same page whenever a Button control within the form is clicked, or whenever the user modifies a control whose AutoPostBack property is set to True. This model simplifies web page development, but carries with it some costs - namely, the large amount of data exchanged between the client and the server during a postback. On postback the browser sends the values of all of its form fields (including hidden ones, like view state, which may be quite large) to the server; the server then sends back the entire contents of the web page. While there are some scenarios where this amount of information needs to be exchanged, in many cases the user has performed some action that requires far less information to be exchanged. With a little bit of forethought and code we can have the browser and server exchange much less data, which leads to more responsive web pages and an improved user experience. Over the past several weeks I've been writing an article series on accessing server-side data from client script. Rather than rely solely on forms and postbacks, many websites use JavaScript code to asynchronously communicate with the server in response to the page loading or some other user action. The server, upon receiving the JavaScript-initiated request, returns just the data needed by the browser, which the browser then seamlessly integrates into the web page. There are a variety of technologies and techniques that can be employed to provide both the needed server- and client-side functionality. Last week's article, Using WCF Services with jQuery and the ASP.NET Ajax Library, explored using the Windows Communication Foundation, or WCF, to serve data from the web server and showed how to consume such a service using both the ASP.NET Ajax Library and jQuery. In a previous 4Guys article, Creating an Online Boggle Solver, I built an application to find all solutions in a game of Boggle. (Boggle is a word game trademarked by Parker Brothers and Hasbro that involves several players trying to find as many words as they can in a 4x4 grid of letters.) This article takes the lessons learned in Using WCF Services with jQuery and the ASP.NET Ajax Library and uses them to update the user interface for my online Boggle solver, replacing the existing WebForms-based user interface with a more modern and responsive interface. I also used jQuery Templates, a JavaScript-based templating library that is useful for displaying the results from a server-side service. Read on to learn more! Read More >

  Read the article

• Questions about identifying the components in MVC

  - by luiscubal

  I'm currently developing an client-server application in node.js, Express, mustache and MySQL. However, I believe this question should be mostly language and framework agnostic. This is the first time I'm doing a real MVC application and I'm having trouble deciding exactly what means each component. (I've done web applications that could perhaps be called MVC before, but I wouldn't confidently refer to them as such) I have a server.js that ties the whole application together. It does initialization of all other components (including the database connection, and what I think are the "models" and the "views"), receiving HTTP requests and deciding which "views" to use. Does this mean that my server.js file is the controller? Or am I mixing code that doesn't belong there? What components should I break the server.js file into? Some examples of code that's in the server.js file: var connection = mysql.createConnection({ host : 'localhost', user : 'root', password : 'sqlrevenge', database : 'blog' }); //... app.get("/login", function (req, res) { //Function handles a GET request for login forms if (process.env.NODE_ENV == 'DEVELOPMENT') { mu.clearCache(); } session.session_from_request(connection, req, function (err, session) { if (err) { console.log('index.js session error', err); session = null; } login_view.html(res, user_model, post_model, session, mu); //I named my view functions "html" for the case I might want to add other output types (such as a JSON API), or should I opt for completely separate views then? }); }); I have another file that belongs named session.js. It receives a cookies object, reads the stored data to decide if it's a valid user session or not. It also includes a function named login that does change the value of cookies. First, I thought it would be part of the controller, since it kind of dealt with user input and supplied data to the models. Then, I thought that maybe it was a model since it dealt with the application data/database and the data it supplies is used by views. Now, I'm even wondering if it could be considered a View, since it outputs data (cookies are part of HTTP headers, which are output)

  Read the article

• Are there any concerns with using a static read-only unit of work so that it behaves like a cache?

  - by Rowan Freeman

  Related question: How do I cache data that rarely changes? I'm making an ASP.NET MVC4 application. On every request the security details about the user will need to be checked with the area/controller/action that they are accessing to see if they are allowed to view it. The security information is stored in the database. For example: User Permission UserPermission Action ActionPermission A "Permission" is a token that is applied to an MVC action to indicate that the token is required in order to access the action. Once a user is given the permission (via the UserPermission table) then they have the token and can therefore access the action. I've been looking in to how to cache this data (since it rarely changes) so that I'm only querying in-memory data and not hitting a database (which is a considerable performance hit at the moment). I've tried storing things in lists, using a caching provider but I either run in to problems or performance doesn't improve. One problem that I constantly run in to is that I'm using lazy loading and dynamic proxies with EntityFramework. This means that even if I ToList() everything and store them somewhere static, the relationships are never populated. For example, User.Permissions is an ICollection but it's always null. I don't want to Include() everything because I'm trying to keep things simple and generic (and easy to modify). One thing I know is that an EntityFramework DbContext is a unit of work that acts with 1st-level caching. That is, for the duration of the unit of work, everything that is accessed is cached in memory. I want to create a read-only DbContext that will exist indefinitely and will only be used to read about permission data. Upon testing this it worked perfectly; my page load times went from 200ms+ to 20ms. I can easily force the data to refresh at certain intervals or simply leave it to refresh when the application pool is recycled. Basically it will behave like a cache. Note that the rest of the application will interact with other contexts that exist per request as normal. Is there any disadvantage to this approach? Could I be doing something different?

  Read the article

• Will you share your SQL Server configuration?

  - by Bill Graziano

  I regularly visit client sites and review their SQL Server configurations.  I come across all kinds of strange settings.  I’ve been thinking about a way to aggregate people’s configurations and see what’s common and what’s unique.  I used to do that with polls on SQLTeam.com.  I think we can find out more interesting things if we look at combinations of settings in relation to size and volume. I’ve been working on an application for another project that is similar.  It will be fairly easy to use that code for this.  I can have something up and running in a few days – if people are interested in it.  I admit that I often come up with ideas that just don’t make sense.  This may be one of them.  One of your biggest concerns has be how secure your data is.  My solution is not to store anything identifying.  The instance name and database names can both be “anonymized” and I don’t store the machine name or IP address or anything to do with logins. Some of the questions I’m curious about are: At what size database does the Enterprise Edition become prevalent? Given the total size of the databases how much RAM is common? How many people have multiple data files?  At what size does that become prevalent? How common is database mirroring?  Replication?  Log shipping? How common is full recovery mode?  At what data size does it become prevalent? I think those are all questions that are easy to answer -- with the right data.  The big question is whether or not people will share their SQL Server configurations.  I understand that organizations in regulated or high security environments can’t participate.  But I think that leaves many, many people that can.  Are you willing to share your configuration and learn about others?  I have a simple sign up form here.  It’s actually a mailing list signup that also captures your edition, number of servers and largest database.  The list will only be used for this project.  Is your SQL Server is configured correctly?  Do you wonder what the next step is as your data grows?  Take a second and sign up.

  Read the article

• A starting point for Use Cases and User Stories

  - by Mike Benkovich

  Originally posted on: http://geekswithblogs.net/benko/archive/2013/07/23/a-starting-point-for-use-cases-and-user-stories.aspxSoftware is a challenging business and is rife with opportunities to go wrong. Over the years a number of methodologies have evolved to help make sure that things go right. In an effort to contribute to this I’ve created a list of user stories that I think should be included and sometimes are just assumed. Note this is a work in progress, so I’m looking for your feedback. I’m curious what you would add or change in my list. · As a DBA I am working with a Normalized data model that reflects an agreed upon logical model for the system · As a DBA I am using consistent names for my fields which match the naming standards of my organization · As a DBA my model supports simple CRUD operations against all the entities · As an Application Architect the UI has been validated against the Business requirements and a complete set of user story’s have been created · As an Application Architect the database model has been validated against the UI · As an Application Architect we have a logical business model that describes all the known and/or expected usage of the system during the software’s expected lifecycle · As an Application Architect we have a Deployment diagram that describes how the application components will be deployed · As an Application Architect we have a navigation diagram that describes the typical application flow · As an Application Architect we have identified points of interaction which describes how the UI interacts with the services and the data storage · As an Application Architect we have identified external systems which may now or in the future use the data of this application and have adapted the logical model to include these interactions · As an Application Architect we have identified existing systems and tools that can be extended and/or reused to help this application achieve it’s business goals · As a Project Manager all team members understand the goals of each release and iteration as they are planned · As a Project Manager all team members understand their role and the roles of others · As a Project Manager we have support of the business to do the right thing even if it is not the expedient thing · As a Test/QA Analyst we have created a simulation environment for testing the system which does not use sensitive data and accurately reflects the scenarios of all the data that will be supported by the system · As a Test/QA Analyst we have identified the matrix of supported clients used to access the system including the likely browsers, mobile devices and other interfaces to work with the application · As a Test/QA Analyst we have created exit criteria for each user story that match the requirements of the business story that was used to create them · As a Test/QA Analyst we have access to a Test environment that is isolated from production and staging environments · As a Test/QA Analyst there we have a way to reset the environment so we can rerun tests when a new version of the software becomes available · As a Test/QA Analyst I am able to automate portions of the test process Thoughts? -mike

  Read the article

• Enterprise Manager 12c: New DSS Demos Available

  - by Javier Puerta

  Enterprise Manager Cloud Control 12c Application Replay Demo Now Available! User Experience Monitoring with Enterprise Manager Cloud Control 12c and Real User Experience Insight 12R1 Now Available! Oracle Enterprise Manager Cloud Control 12c: Database Management Packs demo upgrade     Enterprise Manager Cloud Control 12c Application Replay Demo Now Available! We are pleased to announce the availability of the Oracle Application Replay demo that showcases some of the key capabilities of performing realistic, production scale testing of your web and packaged Oracle applications. This demo specifically focuses on capturing production web traffic from an E-Business Suite application and replaying the captured workload on a test E-Business Suite application to assess the impact of an application infrastructure change on the workload. The target audiences are application developers, quality assurance teams, IT managers and production control staff that deal in day-to-day change management activities and trouble shooting of production environments. Demo Highlights: Enterprise Manager 12c workflows for capturing application workload Seamless integration of Application Replay with Real User Experience Insight for application workload capture Enterprise Manager 12c centralized workflows for replaying captured application workloads in a test environment Demonstrates how to minimize risk when deploying a complex EBusiness Suite application infrastructure change. Rich reporting capability for performance analysis and problem detection User Experience Monitoring with Enterprise Manager Cloud Control 12c and Real User Experience Insight 12R1 Now Available! We are pleased to announce the availability of the Oracle Real User Experience Insight demo that showcases some of the key capabilities of user experience monitoring. This demo specifically focuses on business reporting, integrated performance diagnostics, tracking of customer journey’s through RUEI’s userflow tracking capabilities and it’s Key Performance Indicators tracking and configuration. Demo Highlights: Application-centric dashboard Integration with Oracle Enterprise Manager 12c – JVMD, ADP and BTM Session diagnostics and user session replay Monitoring through “Key Performance Indicators” (KPI) --- create alerts/incidents FUSION Application centric dashboards & integrated BI Oracle Enterprise Manager Cloud Control 12c: Database Management Packs demo upgrade DSS is pleased to announce an upgrade to the Oracle Enterprise Manager Cloud Control 12c: Database Management Packs demo. While retaining the content from the initial release of the demo—Diagnostic and Tuning Packs, Test Data Management and Data Masking, and Real Application Testing—the demo now includes a new Data Masking for Real Application Testing scenario. Demo Features: Diagnostic and Tuning Packs SQL Performance Analyzer Database Replay Data Masking Masking Real Application Testing workloads Testing pending Optimizer statistics Test Data Management

  Read the article

• New ZFS Encryption features in Solaris 11.1

  - by darrenm

  Solaris 11.1 brings a few small but significant improvements to ZFS dataset encryption.  There is a new readonly property 'keychangedate' that shows that date and time of the last wrapping key change (basically the last time 'zfs key -c' was run on the dataset), this is similar to the 'rekeydate' property that shows the last time we added a new data encryption key. $ zfs get creation,keychangedate,rekeydate rpool/export/home/bob NAME PROPERTY VALUE SOURCE rpool/export/home/bob creation Mon Mar 21 11:05 2011 - rpool/export/home/bob keychangedate Fri Oct 26 11:50 2012 local rpool/export/home/bob rekeydate Tue Oct 30 9:53 2012 local The above example shows that we have changed both the wrapping key and added new data encryption keys since the filesystem was initially created.  If we haven't changed a wrapping key then it will be the same as the creation date.  It should be obvious but for filesystems that were created prior to Solaris 11.1 we don't have this data so it will be displayed as '-' instead. Another change that I made was to relax the restriction that the size of the wrapping key needed to match the size of the data encryption key (ie the size given in the encryption property).  In Solaris 11 Express and Solaris 11 if you set encryption=aes-256-ccm we required that the wrapping key be 256 bits in length.  This restriction was unnecessary and made it impossible to select encryption property values with key lengths 128 and 192 when the wrapping key was stored in the Oracle Key Manager.  This is because currently the Oracle Key Manager stores AES 256 bit keys only.  Now with Solaris 11.1 this restriciton has been removed. There is still one case were the wrapping key size and data encryption key size will always match and that is where they keysource property sets the format to be 'passphrase', since this is a key generated internally to libzfs and to preseve compatibility on upgrade from older releases the code will always generate a wrapping key (using PKCS#5 PBKDF2 as before) that matches the key length size of the encryption property. The pam_zfs_key module has been updated so that it allows you to specify encryption=off. There were also some bugs fixed including not attempting to load keys for datasets that are delegated to zones and some other fixes to error paths to ensure that we could support Zones On Shared Storage where all the datasets in the ZFS pool were encrypted that I discussed in my previous blog entry. If there are features you would like to see for ZFS encryption please let me know (direct email or comments on this blog are fine, or if you have a support contract having your support rep log an enhancement request).

  Read the article

• Defining a service layer: the text-based adventure

  - by Stacy Vicknair

  Applications these days have more options than ever for a user interface, and it’s only going to grow. A successful product might require native applications for mobile devices, a regular web implementation, or even a gaming console. These systems often will be centralized and data driven. The solution is one that’s fairly solitary, a service layer! Simply put, take what’s shared and put it behind a physical or abstract layer that defines the boundary between the specific user interface and the shared content.   I know, I know, none of this is complicated. But some times it can be difficult to discern what belongs on which side of the line. For instance, say we’re creating a service that will provide content for both an ASP.NET MVC application and a WP7 application. Although the content served to each application is the same, there are different paradigms and patterns for displaying that data in the different environments. In ASP.NET MVC, you may create a model specific to a page that combines necessary information. In the WP7 application you might require different sets of data that you will connect via MVVM with the view. The general rule of thumb is that any shared content, business rules, or data should exist separately. Any element that is specific to the current UI implementation should be included in a separate library or with the UI implementation itself. The WP7 application doesn’t need my MVC specific model classes. My MVC application doesn’t require those INotifyPropertyChanged viewmodels that the WP7 application depends on. In both cases, there should be additional processing done above the service layer to massage the data to the application’s specific needs.   Service-ocalypse: the text based adventure What helps me the most about deciding whether or not something belongs coupled to the UI implementation or in the shared implementation is thinking of the simplest implementation you could have: a console application. You might have played a game like Peasant’s Quest: The console app is the text based adventure game version of your application. If you’re service was consumed in its simplest form, you would simply have a console based API for it that issues requests. Maybe those requests aren’t SWIM TO BOAT, but they might be CREATE USER JOHN. If I issue a request, I expect that request to be issued to the service. If the service has any exceptions or issues with my input, that business logic should be encapsulated in that service, not implemented in the UI. The service layer should be your functional application in its entirety, and anything above that layer should only assist with the display of that information.

  Read the article

• Silverlight and WCF caching

  - by subodhnpushpak

  There are scenarios where Silverlight client calls WCF (or REST) service for data. Now, if the data is cached on the WCF layer, the calls can take considerable resources at the server if NOT cached. Keeping that in mind along with the fact that cache is an cross-cutting aspect, and therefore it should be as easy as possible to put Cache wherever required. The good thing about the solution is that it caches based on the inputs. The input can be basic type of any complex type. If input changes the data is fetched and then cached for further used. If same input is provided again, data id fetched from the cache. The cache logic itself is implemented as PostSharp aspect, and it is as easy as putting an attribute over service call to switch on cache. Notice how clean the code is:        [OperationContract]       [CacheOnArgs(typeof(int))] // based on actual value of cache        public string DoWork(int value)        {            return string.Format("You entered: {0} @ cached time {1}", value, System.DateTime.Now);        } The cache is implemented as POST Sharp as below 1: public override void OnInvocation(MethodInvocationEventArgs eventArgs) 2: { 3: try 4: { 5: object value = new object(); 6: object[] args = eventArgs.GetArgumentArray(); 7: if (args != null || args.Count() > 0) 8: { 9:   10: string key = string.Format("{0}_{1}", eventArgs.Method.Name, XMLUtility<object>.GetDataContractXml(args[0], null));// Compute the cache key (details omitted). 11:   12: 13: value = GetFromCache(key); 14: if (value == null) 15: { 16: eventArgs.Proceed(); 17: value = XMLUtility<object>.GetDataContractXml(eventArgs.ReturnValue, null); 18: value = eventArgs.ReturnValue; 19: AddToCache(key, value); 20: return; 21: } 22:   23:   24: Log(string.Format("Data returned from Cache {0}",value)); 25: eventArgs.ReturnValue = value; 26: } 27: } 28: catch (Exception ex) 29: { 30: //ApplicationLogger.LogException(ex.Message, Source.UtilityService); 31: } 32: } 33:   34: private object GetFromCache(string inputKey) { if (ServerConfig.CachingEnabled) { return WCFCache.Current[inputKey]; } return null; }private void AddToCache(string inputKey,object outputValue) 35: { 36: if (ServerConfig.CachingEnabled) 37: { 38: if (WCFCache.Current.CachedItemsNumber < ServerConfig.NumberOfCachedItems) 39: { 40: if (ServerConfig.SlidingExpirationTime <= 0 || ServerConfig.SlidingExpirationTime == int.MaxValue) 41: { 42: WCFCache.Current[inputKey] = outputValue; 43: } 44: else 45: { 46: WCFCache.Current.Insert(inputKey, outputValue, new TimeSpan(0, 0, ServerConfig.SlidingExpirationTime), true); 47:   48: // _bw.DoWork += bw_DoWork; 49: //string arg = string.Format("{0}|{1}", inputKey,outputValue); 50: //_bw.RunWorkerAsync(inputKey ); 51: } 52: } 53: } 54: }     The cache class can be extended to support Velocity / memcahe / Nache. the attribute can be used over REST services as well. Hope the above helps. Here is the code base for the same.   Please do provide your inputs / comments.

  Read the article

• PHP, javascript, single quote problems with IE when passing variable from ajax post to javascript fu

  - by Mattis

  Hi! I have been trying to get this to work for a while, and I suspect there's an easy solution that I just can't find. My head feels like jelly and I would really appreciate any help. My main page.php makes a .post() to backend.php and fetches a list of cities which it echoes in the form of: <li onclick="script('$data');">$data</li> The list is fetched and put onto the page via .html(). My problem occurs when $data has a single quote in it. backend.php passes the variable just fine to page.php but when i run html() it throws a javascript error (in IE, not FF obviously); ')' is expected IE parses the single quote and messes up the script()-call. I've been trying to rebuild the echoed string in different ways, escaping the 's on the php side and/or on the javascript side - but in vain. Do I have to review the script in total? page.php $.post("backend.php", {q: ""+str+""}, function(data) { if(data.length >0) { $('#results').html(data); } backend.php while ($row = $q->fetch()) { $city = $row['City']; // $city = addslashes($row['City']); // $city = str_replace("'","&#39;",$row['City']); echo "<li onclick=\"script('$city');\">".$city."</li>"; }

  Read the article

• SignalR - No connection could be made because the target machine actively refused it?

  - by user2151460

  Trying to create a Console application that is going to send data to a website. The website is built with Codeiginter framework, if that matters. When i'm running my Console application, i get the error that a connection could not be made, and that the machine refused it. Been watching some tutorials, but most of them are using Hubs etc, which imo i do not need for this simple task?. All i want to do is to send data to the website, one way. Here is my Console application using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Threading.Tasks; using Microsoft.AspNet.SignalR; using Microsoft.AspNet.SignalR.Client; namespace signalrDemo { class Program { static void Main(string[] args) { var connection = new Connection("http://localhost:3000/servers/2"); connection.Received += data => Console.WriteLine(data); connection.Start().ContinueWith(task => { if (task.IsFaulted) { Console.WriteLine("Failed to start: {0}", task.Exception.GetBaseException()); } else { Console.WriteLine("Success! Connected with client connection id {0}", connection.ConnectionId); } }); Console.ReadLine(); } } } And at my website, i have this code $(function () { var connection = $.connection('http://localhost/servers/2'); connection.received(function (data) { $("message").append(data + '<br />'); }); connection.start().done(); }); Thank you.

  Read the article

• How to do server-side validation using Jqgrid?

  - by Eoghan

  Hi, I'm using jqgrid to display a list of sites and I want to do some server side validation when a site is added or edited. (Form editing rather than inline. Validation needs to be server side for various reasons I won't go into.) I thought the best way would be to check the data via an ajax request when the beforeSubmit event is triggered. However this only seems to work when I'm editing an existing row in the grid - the function isn't called when I add a new row. Have I got my beforeSubmit in the wrong place? Thanks for your help. $("#sites-grid").jqGrid({ url:'/json/sites', datatype: "json", mtype: 'GET', colNames:['Code', 'Name', 'Area', 'Cluster', 'Date Live', 'Status', 'Lat', 'Lng'], colModel :[ {name:'code', index:'code', width:80, align:'left', editable:true}, {name:'name', index:'name', width:250, align:'left', editrules:{required:true}, editable:true}, {name:'area', index:'area', width:60, align:'left', editable:true}, {name:'cluster_id', index:'cluster_id', width:80, align:'right', editrules:{required:true, integer:true}, editable:true, edittype:"select", editoptions:{value:"<?php echo $cluster_options; ?>"}}, {name:'estimated_live_date', index:'estimated_live_date', width:120, align:'left', editable:true, editrules:{required:true}, edittype:"select", editoptions:{value:"<?php echo $this->month_options; ?>"}}, {name:'status', index:'status', width:80, align:'left', editable:true, edittype:"select", editoptions:{value:"Live:Live;Plan:Plan;"}}, {name:'lat', index:'lat', width:140, align:'right', editrules:{required:true}, editable:true}, {name:'lng', index:'lng', width:140, align:'right', editrules:{required:true}, editable:true}, ], height: '300', pager: '#pager-sites', rowNum:30, rowList:[10,30,90], sortname: 'cluster_id', sortorder: 'desc', viewrecords: true, multiselect: false, caption: 'Sites', editurl: '/json/sites' }); $("#sites-grid").jqGrid('navGrid','#pager-sites',{edit:true,add:true,del:true, beforeSubmit : function(postdata, formid) { $.ajax({ url : 'json/validate-site/', data : postdata, dataType : 'json', type : 'post', success : function(data) { alert(data.message); return[data.result, data.message]; } }); }});

  Read the article

• Silverlight DatePicker in DataGrid: Enter does not submit

  - by queen3

  I have DataGrid with DataGridTemplateColumn which has DatePicker as editing element: <data:DataGridTemplateColumn Header="Due date" CanUserSort="False" > <data:DataGridTemplateColumn.CellTemplate> <DataTemplate> <TextBlock Text="{Binding EndDateFormatted}" /> </DataTemplate> </data:DataGridTemplateColumn.CellTemplate> <data:DataGridTemplateColumn.CellEditingTemplate> <DataTemplate> <controls:DatePicker SelectedDate="{Binding EndDate, Mode=TwoWay}" /> </DataTemplate> </data:DataGridTemplateColumn.CellEditingTemplate> </data:DataGridTemplateColumn> The problem is that Enter key does not work at all when in textbox editing mode - just does nothing. Selecting date from dropdown panel works. Also, Tab does not keep value (reset to previous one), but with help of this I can fix it. But I don't know how to make Enter to accept value and preferably move to next cell. I also tried third-party date picker, no changes - same issues with Tab and Enter. Seems like a DataGrid issue. I use Silverlight 3.

  Read the article

• Upgrading EntLib 4.1 to 5 with Oracle.DataAccess.Client

  - by mlk

  Hello, I am upgrading a project from EntLib 4.1 to EntLib 5. I've skimmed through the Migration Guide, changed all the references and updated all the config files to point to EntLib 5. All worked fine accept Oracle database access. With the config file: <configuration> <configSections> <section name="dataConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Data.Configuration.DatabaseSettings, Microsoft.Practices.EnterpriseLibrary.Data, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="true" /> </configSections> <dataConfiguration defaultDatabase="prod"> <providerMappings> <add databaseType="Microsoft.Practices.EnterpriseLibrary.Data.Oracle.OracleDatabase, Microsoft.Practices.EnterpriseLibrary.Data" name="Oracle.DataAccess.Client" /> </providerMappings> </dataConfiguration> <connectionStrings> <add name="prod" connectionString="Data Source=dev;User Id=dev;Password=dev;" providerName="Oracle.DataAccess.Client" /> </connectionStrings> </configuration> which worked with 4.1 all calls to DatabaseFactory.CreateDatabase() fails with: System.InvalidOperationException: The type Database cannot be constructed. You must configure the container to supply this value. If I replace Oracle.DataAccess.Client with the Microsoft System.Data.Oracleclient it all works again, but is not full of ODP.net lovelyness. Does anyone know how to get this to work with EntLib 5? Cheers, Mlk

  Read the article

< Previous Page | 637 638 639 640 641 642 643 644 645 646 647 648  | Next Page >