Search Results

Search found 25284 results on 1012 pages for 'test driven'.

Page 641/1012 | < Previous Page | 637 638 639 640 641 642 643 644 645 646 647 648  | Next Page >

  • Ubuntu 11.10 Random reboots how to find root cause?

    - by Indigo42
    All, This issue started with 11.04, I upgraded to 11.10 this week in hopes it would correct it, but after a few days it happened again.. A few times a day, randomly, my monitors will go black and the machine will come back in the post screen and boot up again. Sometimes it boots up properly, sometimes it boots to disk scan (I understand why...the machine just died with a bunch of stuff open) and sometimes it takes several cycles of this to come up. I connected to the system with my laptop and tailed dmesg, syslog, kern.log, and Xorg.0.log. I also ran a cat /proc/kmesg. Nothing is showing up in any of these log files when it happens..it's just like someone has pulled the plug. I just got through running 4 hours of the memory test with no errors. I have a AMD Phenom 9850 Quad-Core Processor and Nvida 9500GT graphics card. This system has been stable for like 4 years. I'm thinking it might be a hardware problem, but how do I find out? Thanks,

    Read the article

  • ipv6 ssh tunnel service for testing?

    - by Geuis
    I need to do some testing on a service that I run to make sure that it can handle ipv6 addresses. Basically, I need to connect to it from an ipv6 address. I've created a tunnel via tunnelbroker.net, but I'm finding the steps required to get a tunnel configured on my machine and router to be a lot of trouble. Given that I'm not a networking specialist and that I haven't had to dig into routing configuration in years, I'd like to know if there's an existing service that I can just ssh into and use it as my ipv6 endpoint. Simply being able to curl or wget from such an endpoint to my service would be more than enough to test what I need. Thanks!

    Read the article

  • Password format not liked by installer

    - by Box293
    I'm installing Chargeback and I get to the database-related information page (step 5 on page 17 of the users guide). Using a Windows account (it is an administrator of the server and I am logged on as that user) Username: DOMAIN\ServiceVMware-CB Password: #$%UuuU2u (this isn't the password but it does start with #$% and is the same length and case) I click the Test Connected and it returns back OK. I click Next and then I am given a warning telling me that the account does not have the right permissions. Check that it has log on as a service etc etc etc. I quit the installer. I change the password in the domain to Uuuuuu3 I reboot the server I restart the server The installer has no problems with the newer password. I'm not fussed either way, I'm just trying to save someone else the pain and perhaps the allowed password format could be added to the documentation. BTW I am using Server 2008 SP2 x64 with SQL Express 2005 x64.

    Read the article

  • Why are Google search results not working for me? Does it have to do with otnggrneohai? [closed]

    - by shaahin
    Possible Duplicate: What to do if my computer is infected by a virus or a malware? I can't use Google search results right now. The actual searches return results that look valid, but whenever I click on a link, I'm redirected to strange sites. I believe I'm being affected by a virus that has something to do with the string "otnggrneohai." I was running Windows 7 Home with Microsoft Security Essentials, but Microsoft Security Essentials has been deleted. I did not delete it myself. Here is the screen shot, I did a search test in google videos:

    Read the article

  • Working hours for a newbie

    - by martani_net
    This is not a very related software / hardware question, but it's too related to the Tech world. I started a work 3 months before, and I am about to finish this week, and my boss asked me to do a planning of what I've done so far, I think this is totally ok, but he is asking for what I did each day with the hours I spent in these days. This is a sample of what I sent him M T W T F week 29/06 to 03/07 compréhension et analyse du problématique * * architecture de l'application * * * which translates to first task, I spent Monday + Tuesday on, and the last W, T, and Friday. What he is asking for, is what I've done in each day, with the timing I spent on (obviously, I don't think I remember, and because for a programmer, there are no sequence tasks, I mean I change code in a class, then change it in another to fit with the new one and so far) So my question is: is what he asking normal? and if so how can I detail the planning for the 3 months. [update] I used the email account we use to test our software with the extern servers, and I got a good view of what I was doing in every day :), a generic view but it helped too much (PS: The boss doesn't know anything about programming, for him, it's like writing lines and get results back nothing more )

    Read the article

  • Best way to simulate virtual networks

    - by user179529
    I'm wanting to have a vitual test network on either hyper-v or ESXI ( I Don't care which one) I want to have a multi network virtual environment. Lets say three networks: 192.168.1.0, 192.168.2.0 and 192.168.3.0. I want to use the networks to simulate a multi domain or multi site domain. Whats the best way of doing this. I have VMware workstation but it won't create more then one NAT virtual network. So how would I go about doing this in either Hyper-v 2012 or ESXI?

    Read the article

  • Apache mod_rewrite not working properly on Mac OS X 10.6 (Snow Leopard)

    - by DashRantic
    Hello all, I'm trying to create a PHP website with clean URLs with Apache's mod_rewrite, using a .htaccess file. mod_rewrite seems to be working, however, it claims it cannot find files on my server that do exist. Just as a basic test, this is what my .htaccess file looks like at the moment--going to [mysite]/page should redirect to the index.php file: Options +FollowSymLinks RewriteEngine on RewriteRule ^page$ index.php Afaik, I have setup the .conf file appropriately as well: <Directory "/Users/myuser/Sites/"> Options Indexes MultiViews AllowOverride All Order allow,deny Allow from all </Directory> However, when I try accessing the URL setup via mod_rewrite ( localhost/~myuser/mysite/page ), I get this: Not Found The requested URL /Users/myuser/Sites/mysite/index.php was not found on this server. However, that file does exist, and that is the proper location! The site works fine otherwise, if I go to localhost/~myuser/mysite/index.php, everything works fine--minus any sort of clean URLs, of course. Has anyone seen this before/have any ideas as to what I'm doing wrong?

    Read the article

  • Citrix on ESX 4 U1 - Slow login times

    - by thomps01
    I'm sure they'd be just as slow if not slower using ESX 3 but I'm looking for some assistance. On a physical Citrix server, logins are 1 - 4 seconds. The virtual - 16 - 23 seconds. I'm looking for performance enhancements that I can make to me VMs to try and reduce the login wait times. The hardware is fine (HP BL685 (24 cores, 64GB RAM). And there's nothing pushing it yet. Network 10Gb I'm planning to test the configuration with VMXNET3 tomorrow, but does anyone have a list a best practices I can use when testing?

    Read the article

  • Forward external traffic to 127.0.0.1

    - by user2939415
    I have an HTTP server running on 127.0.0.1:8000. How can I use iptables or something to route external traffic to it? I want to be able to access my.ip.addr:8000 from my browser. iptables -A PREROUTING -i eth0 -p tcp --dport 8000 -j REDIRECT --to-ports 8000 does not help EDIT: To test whether or not this works I am using the following node.js script: // Load the http module to create an http server. var http = require('http'); // Configure our HTTP server to respond with Hello World to all requests. var server = http.createServer(function (request, response) { response.writeHead(200, {"Content-Type": "text/plain"}); response.end("Hello World\n"); }); // Listen on port 8000, IP defaults to 127.0.0.1 server.listen(8000, "127.0.0.1"); // Put a friendly message on the terminal console.log("Server running at http://127.0.0.1:8000/");

    Read the article

  • 1TB HDD making strange noise (not a common one)

    - by Darkkurama
    I built a new PC some days ago, and everything seems perfect, except that the 1 TB HDD I cloned from my old 500 GB HDD is making a deep weird sound. First of all, every time I access the disk, I hear a deep sound, and when the PC is turning on, I hear some clicking (the rapid clicking is my mouse, I'm opening and closing folders to trigger the vibrating deep weird sound I'm describing). I'm using this 1TB disk for data mainly (I use a SSD as the OS). As background information, the disk is a seagate barracuda 7200 rpm which was RMAd and replaced with a refurbished one. Maybe the refurbished disks make these noises? should I worry about my data? (although the disk is working normal and passed a seagatetools short generic test? Thanks! PS: I recorded the sounds, just click on the links. Thanks

    Read the article

  • Cluster for game servers [closed]

    - by Boby
    We want to make a cluster for game servers, but we don't know which cluster system to choose. We need load balancing cluster. Now we have 2 server for test (First - 2 x Xeon E5320, 8 GB RAM and second i5 2500, 16 GB RAM), this servers will work as nodes. After we will add more. We use Linux. We need some help with cluster. We don't know which cluster system to use for this reason. And maybe some help (instructions). And please don't say that we need to forget it. Thank you for answers!

    Read the article

  • ??Oracle ???????

    - by Steve He(???)
    ?????? ??????Oracle Configuration Manager (OCM)????, ????????,?????2?????????????????,?????????????????????????,?????????My Oracle Support?Oracle??????????,???????????????????,??????????? Oracle?????????,?????????????????????????????????????,OCM??????Oracle??????????? ?????????,Oracle????????????????????????My Oracle Support????? ??????,Oracle??????????????????,?????????????????????My Oracle Support?????OCM???,????????????????Oracle?????????????,???????????????????????????,??????????????????,????????????????,???????????,????????????????????Oracle???????,??????????,???????????????????????????,?????????????? ???????? ???????????????,????????????????????????My Oracle Support,??“Collector” ??????????????????“Collector”????,??“More”???????“Collector”????,???????????????????????????????????????????????????????????,??FTP????(ZIP)???PC??Oracle??????????????????????,??$ORACLE_HOME??,???????????????,???????????????????????? My Oracle Support ???(?????,??????) Proxy??(??IP??,???,??????) ???? ?My Oracle Support?????zip????? $Oracle_Home  ????My Oracle Support ???zip?? – ?????CCR???????????? ?????? “$ORACLE_HOME/CCR/bin” ,?????? “setupCCR” ???? My Oracle Support ??(?????,??????) ??????????????                                      ???? ?????  ??,???????,????????????Oracle home????????????????????Oracle??????,EBS,?Enterprise Manager?????,???? Installation and Administration Guide ?????My Oracle Support????????? ?My Oracle Support????? Oracle Configuration Manager Installation and Administration Guide [ID 728989.5] Oracle Configuration Manager Prerequisites [ID 728473.5] Oracle Configuration Manager Network Connectivity Test [ID 728970.5] Oracle Configuration Manager Collection Overview [ID 728985.5] Oracle Configuration Manager Security Overview [ID 728982.5] Oracle Software Configuration Manager: Disconnected Mode Collection [ID 453412.1]  

    Read the article

  • Uncompiled WCF on IIS7: The type could not be found

    - by Jimmy
    Hello, I've been trying to follow this tutorial for deploying a WCF sample to IIS . I can't get it to work. This is a hosted site, but I do have IIS Manager access to the server. However, in step 2 of the tutorial, I can't "create a new IIS application that is physically located in this application directory". I can't seem to find a menu item, context menu item, or what not to create a new application. I've been right-clicking everywhere like crazy and still can't figure out how to create a new app. I suppose that's probably the root issue, but I tried a few other things (described below) just in case that actually is not the issue. This is "deployed" at http://test.com.cws1.my-hosting-panel.com/IISHostedCalcService/Service.svc . The error says: The type 'Microsoft.ServiceModel.Samples.CalculatorService', provided as the Service attribute value in the ServiceHost directive, or provided in the configuration element system.serviceModel/serviceHostingEnvironment/serviceActivations could not be found. I also tried to create a virtual dir (IISHostedCalc) in dotnetpanel that points to IISHostedCalcService . When I navigate to http://test.com.cws1.my-hosting-panel.com/IISHostedCalc/Service.svc , then there is a different error: This collection already contains an address with scheme http. There can be at most one address per scheme in this collection. As per the tutorial, there was no compiling involved; I just dropped the files on the server as follow inside the folder IISHostedCalcService: service.svc Web.config Service.cs service.svc contains: <%@ServiceHost language=c# Debug="true" Service="Microsoft.ServiceModel.Samples.CalculatorService"%> (I tried with quotes around the c# attribute, as this looks a little strange without quotes, but it made no difference) Web.config contains: <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.serviceModel> <services> <service name="Microsoft.ServiceModel.Samples.CalculatorService"> <!-- This endpoint is exposed at the base address provided by host: http://localhost/servicemodelsamples/service.svc --> <endpoint address="" binding="wsHttpBinding" contract="Microsoft.ServiceModel.Samples.ICalculator" /> <!-- The mex endpoint is explosed at http://localhost/servicemodelsamples/service.svc/mex --> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> </service> </services> </system.serviceModel> <system.web> <customErrors mode="Off"/> </system.web> </configuration> Service.cs contains: using System; using System.ServiceModel; namespace Microsoft.ServiceModel.Samples { [ServiceContract] public interface ICalculator { [OperationContract] double Add(double n1, double n2); [OperationContract] double Subtract(double n1, double n2); [OperationContract] double Multiply(double n1, double n2); [OperationContract] double Divide(double n1, double n2); } public class CalculatorService : ICalculator { public double Add(double n1, double n2) { return n1 + n2; } public double Subtract(double n1, double n2) { return n1 - n2; } public double Multiply(double n1, double n2) { return n1 * n2; } public double Divide(double n1, double n2) { return n1 / n2; } } }

    Read the article

  • WPF Templates error - "Provide value on 'System.Windows.Baml2006.TypeConverterMarkupExtension' threw

    - by jasonk
    I've just started experimenting with WPF templates vs. styles and I'm not sure what I'm doing wrong. The goal below is to alternate the colors of the options in the menu. The code works fine with just the , but when I copy and paste/rename it for the second segment of "MenuChoiceOdd" I get the following error: Provide value on 'System.Windows.Baml2006.TypeConverterMarkupExtension' threw an exception. Sample of the code: <Window x:Class="WpfApplication1.Template_Testing" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Template_Testing" Height="300" Width="300"> <Grid> <Grid.Resources> <ControlTemplate x:Key="MenuChoiceEven"> <Border BorderThickness="1" BorderBrush="#FF4A5D80"> <TextBlock Height="Auto" HorizontalAlignment="Stretch" Margin="0" Width="Auto" FontSize="14" Foreground="SlateGray" TextAlignment="Left" AllowDrop="True" Text="{Binding Path=Content, RelativeSource={RelativeSource TemplatedParent}}"> <TextBlock.Background> <LinearGradientBrush EndPoint="0.5,1" StartPoint="0.5,0"> <GradientStop Color="White" Offset="0" /> <GradientStop Color="#FFC2CCDB" Offset="1" /> </LinearGradientBrush> </TextBlock.Background> </TextBlock> </Border> </ControlTemplate> <ControlTemplate x:Key="MenuChoiceOdd"> <Border BorderThickness="1" BorderBrush="#FF4A5D80"> <TextBlock Height="Auto" HorizontalAlignment="Stretch" Margin="0" Width="Auto" FontSize="14" Foreground="SlateGray" TextAlignment="Left" AllowDrop="True" Text="{Binding Path=Content, RelativeSource={RelativeSource TemplatedParent}}"> <TextBlock.Background> <LinearGradientBrush EndPoint="0.5,1" StartPoint="0.5,0"> <GradientStop Color="White" Offset="0" /> <GradientStop Color="##FFCBCBCB" Offset="1" /> </LinearGradientBrush> </TextBlock.Background> </TextBlock> </Border> </ControlTemplate> </Grid.Resources> <Border BorderBrush="SlateGray" BorderThickness="2" Margin="10" CornerRadius="10" Background="LightSteelBlue" Width="200"> <StackPanel Margin="4"> <TextBlock Height="Auto" HorizontalAlignment="Stretch" Margin="2,2,2,0" Name="MenuHeaderTextBlock" Text="TextBlock" Width="Auto" FontSize="16" Foreground="PaleGoldenrod" TextAlignment="Left" Padding="10" FontWeight="Bold"><TextBlock.Background><LinearGradientBrush EndPoint="0.5,1" StartPoint="0.5,0"><GradientStop Color="LightSlateGray" Offset="0" /><GradientStop Color="DarkSlateGray" Offset="1" /></LinearGradientBrush></TextBlock.Background></TextBlock> <StackPanel Height="Auto" HorizontalAlignment="Stretch" Margin="2,0,2,0" Name="MenuChoicesStackPanel" VerticalAlignment="Top" Width="Auto"> <Button Template="{StaticResource MenuChoiceEven}" Content="Test Even menu element" /> <Button Template="{StaticResource MenuChoiceOdd}" Content="Test odd menu element" /> </StackPanel> </StackPanel> </Border> </Grid> </Window> What am I doing wrong?

    Read the article

  • Implements EAN13 and UPC-A barcode in PDF using fpdf in classic ASP

    - by Jeremy N
    /* FPDF library for ASP can be downloaded from: http://www.aspxnet.it/public/default.asp INFORMATIONS: Translated by: Jeremy Author: Olivier License: Freeware DESCRIPTION: This script implements EAN13 and UPC-A barcodes (the second being a particular case of the first one). Bars are drawn directly in the PDF (no image is generated) function EAN13(x,y,barcode,h,w) -x = x coordinate to start drawing the barcode -y = y coordinate to start drawing the barcode -barcode = code to write (must be all numeric) -h = height of the bar -w = the minimum width of individual bar function UPC_A(x,y,barcode,h,w) Same parameters An EAN13 barcode is made up of 13 digits, UPC-A of 12 (leading zeroes are added if necessary). The last digit is a check digit; if it's not supplied or if it is incorrect, it will be automatically computed. USAGE: Copy all of this text and save it in a file called barcode.ext file under fpdf/extends folder EXAMPLE: Set pdf=CreateJsObject("FPDF") pdf.CreatePDF "P","mm","letter" pdf.SetPath("fpdf/") pdf.LoadExtension("barcode") pdf.Open() pdf.AddPage() 'set the fill color to black pdf.setfillcolor 0,0,0 pdf.UPC_A 80,40,"123456789012",16,0.35 pdf.Close() pdf.NewOutput "" , true, "test.pdf" */ this.EAN13=function (x,y,barcode,h,w) { return this.Barcode(x,y,barcode,h,w,13); }; this.UPC_A=function (x,y,barcode,h,w) { return this.Barcode(x,y,barcode,h,w,12); }; function GetCheckDigit(barCode) { bc = barCode.replace(/[^0-9]+/g,''); total = 0; //Get Odd Numbers for (i=bc.length-1; i=0; i=i-2) { total = total + parseInt(bc.substr(i,1)); } //Get Even Numbers for (i=bc.length-2; i=0; i=i-2) { temp = parseInt(bc.substr(i,1)) * 2; if (temp 9) { tens = Math.floor(temp/10); ones = temp - (tens*10); temp = tens + ones; } total = total + temp; } //Determine the checksum modDigit = (10 - total % 10) % 10; return modDigit.toString(); } //Test validity of check digit function TestCheckDigit(barcode) { var cd=GetCheckDigit(barcode.substring(0,barcode.length-1)); return cd==parseInt(barcode.substring(barcode.length-1,1)); } this.Barcode=function Barcode(x,y,barcode,h,w,len) { //Padding while(barcode.length < len-1) { barcode = '0' + barcode; } if(len==12) {barcode='0' + barcode;} //Add or control the check digit if(barcode.length==12) { barcode += GetCheckDigit(barcode); } else { //if the check digit is incorrect, fix the check digit. if(!TestCheckDigit(barcode)) { barcode = barcode.substring(0,barcode.length-1) + GetCheckDigit(barcode.substring(0,barcode.length-1)); } } //Convert digits to bars var codes=[['0001101','0011001','0010011','0111101','0100011','0110001','0101111','0111011','0110111','0001011'], ['0100111','0110011','0011011','0100001','0011101','0111001','0000101','0010001','0001001','0010111'], ['1110010','1100110','1101100','1000010','1011100','1001110','1010000','1000100','1001000','1110100'] ]; var parities=[[0,0,0,0,0,0], [0,0,1,0,1,1], [0,0,1,1,0,1], [0,0,1,1,1,0], [0,1,0,0,1,1], [0,1,1,0,0,1], [0,1,1,1,0,0], [0,1,0,1,0,1], [0,1,0,1,1,0], [0,1,1,0,1,0] ]; var code='101'; var p=parities[parseInt(barcode.substr(0,1))]; var i; for(i=1;i<=6;i++) { code+= codes[p[i-1]][parseInt(barcode.substr(i,1))]; } code+='01010'; for(i=7;i<=12;i++) { code+= codes[2][parseInt(barcode.substr(i,1))]; } code+='101'; //Draw bars for(i=0;i<code.length;i++) { if(code.substr(i,1)=='1') { this.Rect(x+i*w,y,w,h,'F'); } } //Print text uder barcode. this.SetFont('Arial','',12); //Set the x so that the font is centered under the barcode this.Text(x+parseInt(0.5*barcode.length)*w,y+h+11/this.k,barcode.substr(barcode.length-len,len)); }

    Read the article

  • Using xsl:variable in a xsl:foreach select statment

    - by Nefariousity
    I'm trying to iterate through an xml document using xsl:foreach but I need the select=" " to be dynamic so I'm using a variable as the source. Here's what I've tried: ... <xsl:template name="SetDataPath"> <xsl:param name="Type" /> <xsl:variable name="Path_1">/Rating/Path1/*</xsl:variable> <xsl:variable name="Path_2">/Rating/Path2/*</xsl:variable> <xsl:if test="$Type='1'"> <xsl:value-of select="$Path_1"/> </xsl:if> <xsl:if test="$Type='2'"> <xsl:value-of select="$Path_2"/> </xsl:if> <xsl:template> ... <!-- Set Data Path according to Type --> <xsl:variable name="DataPath"> <xsl:call-template name="SetDataPath"> <xsl:with-param name="Type" select="/Rating/Type" /> </xsl:call-template> </xsl:variable> ... <xsl:for-each select="$DataPath"> ... The foreach threw an error stating: "XslTransformException - To use a result tree fragment in a path expression, first convert it to a node-set using the msxsl:node-set() function." When I use the msxsl:node-set() function though, my results are blank. I'm aware that I'm setting $DataPath to a string, but shouldn't the node-set() function be creating a node set from it? Am I missing something? When I don't use a variable: <xsl:for-each select="/Rating/Path1/*"> I get the proper results. Here's the XML data file I'm using: <Rating> <Type>1</Type> <Path1> <sarah> <dob>1-3-86</dob> <user>Sarah</user> </sarah> <joe> <dob>11-12-85</dob> <user>Joe</user> </joe> </Path1> <Path2> <jeff> <dob>11-3-84</dob> <user>Jeff</user> </jeff> <shawn> <dob>3-5-81</dob> <user>Shawn</user> </shawn> </Path2> </Rating> My question is simple, how do you run a foreach on 2 different paths?

    Read the article

  • SSRS ReportViewer 2010 Iframe IE Problem

    - by Phil
    Hello all, My problem relates to trying to include an SSRS (SQL Server) Report inside my MVC application. I've settled on the hybrid solution of having a WebForm with the ReportViewer Control in and then on my MVC View pages having an iframe reference this WebForm page. The tricky part is that the iframe needs to be dynamically populated with the report rather than using src due to posting parameters to the WebForm. It works perfectly in Firefox and Chrome, however IE throws a "Sys is Undefined" javascript error. Using src on the iframe works in IE, but I can't find a way to post parameters (don't want to use something like /Report.aspx?param1=test due to the possible length). Its a ASP.NET MVC 2 project, .NET 4, Visual Studio 2010 on Windows 7 x74 if its any help. So here is the code (I could provide the VS2010 project files if anyone wants them) In my webform: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Report.aspx.cs" Inherits="SSRSMVC.Views.Home.Report" %> <%@ Register Assembly="Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" Namespace="Microsoft.Reporting.WebForms" TagPrefix="rsweb" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <body> <form id="RSForm" runat="server"> <asp:ScriptManager ID="ScriptManager" runat="server" EnablePartialRendering="true" ScriptMode="Release"> </asp:ScriptManager> <asp:UpdatePanel ID="ReportViewerUP" runat="server"> <ContentTemplate> <rsweb:ReportViewer ID="ReportViewer" runat="server" Width="100%" Height="380px" ProcessingMode="Local" InteractivityPostBackMode="AlwaysAsynchronous" AsyncRendering="true"> <LocalReport ReportPath="Models\\TestReport.rdlc"> </LocalReport> </rsweb:ReportViewer> </ContentTemplate> </asp:UpdatePanel> </form> </body> </html> And Codebehind: using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; using Microsoft.Reporting.WebForms; namespace SSRSMVC.Views.Home { public partial class Report : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { if (!Page.IsPostBack) { string test = Request.Params["val1"]; ReportViewer.LocalReport.DataSources.Add(new ReportDataSource("DataSet1", new SSRSMVC.Models.DataProvider().GetData())); } } } } And lastly my View page, <script type="text/javascript"> $(window).load(function () { $.post('/Report.aspx', { val1: "Hello World" }, function (data) { var rv_frame = document.getElementById('Frame1'); rv_frame = (rv_frame.contentWindow) ? rv_frame.contentWindow : (rv_frame.contentDocument.document) ? rv_frame.contentDocument.document : rv_frame.contentDocument; rv_frame.document.open(); rv_frame.document.write(data); rv_frame.document.close(); }); }); </script>

    Read the article

  • SMO ConnectionContext.StatementTimeout setting is ignored

    - by Woody
    I am successfully using Powershell with SMO to backup most databases. However, I have several large databases in which I receive a "timeout" error "System.Data.SqlClient.SqlException: Timeout expired". The timout consistently occurs at 10 minutes. I have tried setting ConnectionContext.StatementTimeout to 0, 6000, and to [System.Int32]::MaxValue. The setting made no difference. I have found a number of Google references which indicate setting it to 0 makes it unlimited. No matter what I try, the timeouts consistently occur at 10 minutes. I even set Remote Query Timeout on the server to 0 (via Studio Manager) to no avail. Below is my SMO connection where I set the time out and the actual backup function. Further below is the output from my script. UPDATE Interestingly enough, I wrote the backup function in C# using VS 2008 and the timeout override does work within that environment. I am in the process of incorporating that C# process into my Powershell Script until I can find out why the timeout override does not work with just Powershell. This is extremely annoying! function New-SMOconnection { Param ($server, $ApplicationName= "PowerShell SMO", [int]$StatementTimeout = 0 ) # Write-Debug "Function: New-SMOconnection $server $connectionname $commandtimeout" if (test-path variable:\conn) { $conn.connectioncontext.disconnect() } else { $conn = New-Object('Microsoft.SqlServer.Management.Smo.Server') $server } $conn.connectioncontext.applicationName = $applicationName $conn.ConnectionContext.StatementTimeout = $StatementTimeout $conn.connectioncontext.Connect() $conn } $smo = New-SMOConnection -server $server if ($smo.connectioncontext.isopen -eq $false) { Throw "Could not connect to server $($server)." } Function Backup-Database { Param([string]$dbname) $db = $smo.Databases.get_Item($dbname) if (!$db) {"Database $dbname was not found"; Return} $sqldir = $smo.Settings.BackupDirectory + "\$($smo.name -replace ("\\", "$"))" $s = ($server.Split('\'))[0] $basedir = "\\$s\" + $($sqldir -replace (":", "$")) $dt = get-date -format yyyyMMdd-HHmmss $dbbk = new-object ('Microsoft.SqlServer.Management.Smo.Backup') $dbbk.Action = 'Database' $dbbk.BackupSetDescription = "Full backup of " + $dbname $dbbk.BackupSetName = $dbname + " Backup" $dbbk.Database = $dbname $dbbk.MediaDescription = "Disk" $target = "$basedir\$dbname\FULL" if (-not(Test-Path $target)) { New-Item $target -ItemType directory | Out-Null} $device = "$sqldir\$dbname\FULL\" + $($server -replace("\\", "$")) + "_" + $dbname + "_FULL_" + $dt + ".bak" $dbbk.Devices.AddDevice($device, 'File') $dbbk.Initialize = $True $dbbk.Incremental = $false $dbbk.LogTruncation = [Microsoft.SqlServer.Management.Smo.BackupTruncateLogType]::Truncate If (!$copyonly) { If ($kill) {$smo.KillAllProcesses($dbname)} $dbbk.SqlBackupAsync($server) } $dbbk } Started SQL backups for server LCFSQLxxx\SQLxxx at 05/06/2010 15:33:16 Statement TimeOut value set to 0. DatabaseName : OperationsManagerDW StartBackupTime : 5/6/2010 3:33:16 PM EndBackupTime : 5/6/2010 3:43:17 PM StartCopyTime : 1/1/0001 12:00:00 AM EndCopyTime : 1/1/0001 12:00:00 AM CopiedFiles : Status : Failed ErrorMessage : System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. The backup or restore was aborted. 10 percent processed. 20 percent processed. 30 percent processed. 40 percent processed. 50 percent processed. 60 percent processed. 70 percent processed. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.SqlServer.Management.Common.ServerConnection.ExecuteNonQuery(String sqlCommand, ExecutionTypes executionType) Ended backups at 05/06/2010 15:43:23

    Read the article

  • Android: ActivityThread.performLaunchActivity error

    - by fordays
    Hi, I'm getting an ActivityThread.performLaunchActivity(ActivityThread$ActivityRecord,Intent) error each time I boot up my program in the debugger. The program won't even start up! Any help would be greatly appreciated! I'm very new to this environment. Let me know if you need anymore information/code to help me out. Here is my logcat: 06-09 11:16:26.848: ERROR/vold(27): Error opening switch name path '/sys/class/switch/test2' (No such file or directory) 06-09 11:16:26.848: ERROR/vold(27): Error bootstrapping switch '/sys/class/switch/test2' (No such file or directory) 06-09 11:16:26.848: ERROR/vold(27): Error opening switch name path '/sys/class/switch/test' (No such file or directory) 06-09 11:16:26.848: ERROR/vold(27): Error bootstrapping switch '/sys/class/switch/test' (No such file or directory) 06-09 11:16:37.887: ERROR/MemoryHeapBase(53): error opening /dev/pmem: No such file or directory 06-09 11:16:37.887: ERROR/SurfaceFlinger(53): Couldn't open /sys/power/wait_for_fb_sleep or /sys/power/wait_for_fb_wake 06-09 11:16:37.927: ERROR/libEGL(53): couldn't load <libhgl.so> library (Cannot load library: load_library[984]: Library 'libhgl.so' not found) 06-09 11:16:38.407: ERROR/libEGL(64): couldn't load <libhgl.so> library (Cannot load library: load_library[984]: Library 'libhgl.so' not found) 06-09 11:16:41.358: ERROR/BatteryService(53): Could not open '/sys/class/power_supply/usb/online' 06-09 11:16:41.367: ERROR/BatteryService(53): Could not open '/sys/class/power_supply/battery/batt_vol' 06-09 11:16:41.367: ERROR/BatteryService(53): Could not open '/sys/class/power_supply/battery/batt_temp' 06-09 11:16:41.667: ERROR/EventHub(53): could not get driver version for /dev/input/mouse0, Not a typewriter 06-09 11:16:41.667: ERROR/EventHub(53): could not get driver version for /dev/input/mice, Not a typewriter 06-09 11:16:41.797: ERROR/System(53): Failure starting core service 06-09 11:16:41.797: ERROR/System(53): java.lang.SecurityException 06-09 11:16:41.797: ERROR/System(53): at android.os.BinderProxy.transact(Native Method) 06-09 11:16:41.797: ERROR/System(53): at android.os.ServiceManagerProxy.addService(ServiceManagerNative.java:146) 06-09 11:16:41.797: ERROR/System(53): at android.os.ServiceManager.addService(ServiceManager.java:72) 06-09 11:16:41.797: ERROR/System(53): at com.android.server.ServerThread.run(SystemServer.java:162) 06-09 11:16:41.797: ERROR/AndroidRuntime(53): Crash logging skipped, no checkin service 06-09 11:16:42.777: ERROR/LockPatternKeyguardView(53): Failed to bind to GLS while checking for account 06-09 11:16:46.557: ERROR/ActivityThread(111): Failed to find provider info for com.google.settings 06-09 11:16:46.577: ERROR/ActivityThread(111): Failed to find provider info for com.google.settings 06-09 11:16:49.087: ERROR/ApplicationContext(53): Couldn't create directory for SharedPreferences file shared_prefs/wallpaper-hints.xml 06-09 11:16:51.146: ERROR/ActivityThread(108): Failed to find provider info for android.server.checkin 06-09 11:16:54.266: ERROR/ActivityThread(108): Failed to find provider info for android.server.checkin 06-09 11:16:54.416: ERROR/ActivityThread(108): Failed to find provider info for android.server.checkin 06-09 11:16:56.336: ERROR/MediaPlayerService(31): Couldn't open fd for content://settings/system/notification_sound 06-09 11:16:56.356: ERROR/MediaPlayer(53): Unable to to create media player 06-09 11:16:56.637: ERROR/AndroidRuntime(201): Uncaught handler: thread main exiting due to uncaught exception 06-09 11:16:56.757: ERROR/AndroidRuntime(201): java.lang.RuntimeException: Unable to start activity ComponentInfo{com.svgeeks.kidneytest/com.svgeeks.kidneytest.KidneyTest}: java.lang.ClassCastException: android.widget.EditText 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2401) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2417) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.app.ActivityThread.access$2100(ActivityThread.java:116) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1794) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.os.Handler.dispatchMessage(Handler.java:99) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.os.Looper.loop(Looper.java:123) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.app.ActivityThread.main(ActivityThread.java:4203) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at java.lang.reflect.Method.invokeNative(Native Method) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at java.lang.reflect.Method.invoke(Method.java:521) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:791) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:549) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at dalvik.system.NativeStart.main(Native Method) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): Caused by: java.lang.ClassCastException: android.widget.EditText 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at com.svgeeks.kidneytest.KidneyTest.onCreate(KidneyTest.java:57) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1123) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2364) 06-09 11:16:56.757: ERROR/AndroidRuntime(201): ... 11 more 06-09 11:16:56.876: ERROR/dalvikvm(201): Unable to open stack trace file '/data/anr/traces.txt': Permission denied

    Read the article

  • XSLt.transform gives me "d»z"

    - by phenevo
    Hi, I have XML: <results> <Countries country="Albania"> <Regions region="Centralna Albania"> <Provinces province="Durres i okolice"> <Cities city="Durres" cityCode="2B66E0ACFAEF78734E3AF1194BFA6F8DEC4C5760"> <IndividualFlagsWithForObjects Status="1" /> <IndividualFlagsWithForObjects Status="0" /> <IndividualFlagsWithForObjects status="2" /> </Cities> </Provinces> </Regions> </Countries> <Countries .... Which is result of this part of query: SELECT Countries.FileSystemName as country, Regions.DefaultName as region , Provinces.DefaultName as province, cities.defaultname as city, cities.code as cityCode, IndividualFlagsWithForObjects.value as Status I have xslt: <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:output method="text" encoding="iso-8859-1"/> <xsl:param name="delim" select="string(',')" /> <xsl:param name="quote" select="string('&quot;')" /> <xsl:param name="break" select="string('&#xD;')" /> <xsl:template match="/"> <xsl:apply-templates select="results/countries" /> </xsl:template> <xsl:template match="countries"> <xsl:apply-templates /> <xsl:if test="following-sibling::*"> <xsl:value-of select="$break" /> </xsl:if> </xsl:template> <xsl:template match="*"> <!-- remove normalize-space() if you want keep white-space at it is --> <xsl:value-of select="concat($quote, normalize-space(.), $quote)" /> <xsl:if test="following-sibling::*"> <xsl:value-of select="$delim" /> </xsl:if> </xsl:template> <xsl:template match="text()" /> </xsl:stylesheet> And is part of code XmlReader reader = cmd.ExecuteXmlReader(); doc.LoadXml("<results></results>"); XmlNode newNode = doc.ReadNode(reader); while (newNode != null) { doc.DocumentElement.AppendChild(newNode); newNode = doc.ReadNode(reader); } doc.Save(@"c:\listOfCities.xml"); XslCompiledTransform XSLT = new XslCompiledTransform(); XsltSettings settings = new XsltSettings(); settings.EnableScript = true; XSLT.Load(@"c:\xsltfile1.xslt", settings, new XmlUrlResolver()); XSLT.Transform(doc.OuterXml,@"c:\myCities.csv"); Why now I have in my csv only one cell with value : d»z

    Read the article

  • AuthSub token from Google/YouTube API is always returned as invalid

    - by Miriam Raphael Roberts
    Anyone out there have experience with the YouTube/Google API? I am trying to login to Google/Youtube using clientLogin, retrieve an AuthSub token, exchange it for a multi-session token and then use it in our upload form. Just a note that we are not going to have other users logging into our (secure) website, this is for our use only (no multi-users). We just want a way to upload videos to our YT account via our own website without having to login/upload to YouTube. Ultimately, everything is dependent on the first step. My AuthSub token is always being returned as invalid (Error '403'). All the steps I used are below with username/password changed. Anyone have an insight on why my AuthSub is always invalid? I am spending an enormous amount of time trying to get this to work. STEP 1: Getting the authsub token from Youtube/Google POST /youtube/accounts/ClientLogin HTTP/1.1 User-Agent: curl/7.10.6 (i386-redhat-linux-gnu) libcurl/7.10.6 OpenSSL/0.9.7a ipv6 zlib/1.1.4 Host: www.google.com Pragma: no-cache Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, */* Content-Type:application/x-www-form-urlencoded Content-Length: 86 Email=MyGoogleUsername&Passwd=MyGooglePasswd&accountType=GOOGLE&service=youtube&source=Test RESPONSE RECEIVED: Auth=AIwbFAR99f3iACfkT-5PXCB-1tN4vlyP_1CiNZ8JOn6P-......yv4d4zeGRemNm4il1e-M6czgfDXAR0w9fQ YouTubeUser=MyYouTubeUsername CURL COMMAND USED: /usr/bin/curl -S -v --location https://www.google.com/youtube/accounts/ClientLogin --data Email=MyGoogleUsername&Passwd=MyGooglePasswd&accountType=GOOGLE&service=youtube&source=Test --header Content-Type:application/x-www-form-urlencoded STEP 2: Exchanging the AuthSub token for a multi-use token GET /accounts/AuthSubSessionToken HTTP/1.1 User-Agent: curl/7.10.6 (i386-redhat-linux-gnu) libcurl/7.10.6 OpenSSL/0.9.7a ipv6 zlib/1.1.4 Host: www.google.com Pragma: no-cache Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, */* Content-Type:application/x-www-form-urlencoded Authorization: AuthSub token="AIwbFASiRR3XDKs......p5Oy_VA_9U2yV1enxJoVGSgMlZqTcjKw9mS861vlc9GWTH9D9sQ" Response received: 403 Invalid AuthSub token. curl command used: /usr/bin/curl -S -v --location https://www.google.com/accounts/AuthSubSessionToken --header Content-Type:application/x-www-form-urlencoded -H Authorization: AuthSub token="AIwbFAQR_4xG2g.....vp3BQZW5XEMyIj_wFozHSTEQ-BQRfYuIY-1CyqLeQ" STEP 3: Checking to see if the token is good/valid GET /accounts/AuthSubTokenInfo HTTP/1.1 User-Agent: curl/7.10.6 (i386-redhat-linux-gnu) libcurl/7.10.6 OpenSSL/0.9.7a ipv6 zlib/1.1.4 Host: www.google.com Pragma: no-cache Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, */* Content-Type:application/x-www-form-urlencoded Authorization: AuthSub token="AIwbFASiRR3XDKsNkaIoPaujN5RQhKs3u.....A_9U2yV1enxJoVGSgMlZqTcjKw9mS861vlc9GWTH9D9sQ" Received response: 403 Invalid AuthSub token. curl command used: /usr/bin/curl -S -v --location https://www.google.com/accounts/AuthSubTokenInfo --header Content-Type:application/x-www-form-urlencoded -H Authorization: AuthSub token="AIwbFAQR_4xG2gHoAKDsNdFqdZdwWjGeNquOLpvp3BQZW5XEMyIj_wFozHSTEQ-BQRfYuIY-1CyqLeQ" STEP 4: Trying to get the upload token using the authsub token POST /action/GetUploadToken HTTP/1.1 User-Agent: curl/7.10.6 (i386-redhat-linux-gnu) libcurl/7.10.6 OpenSSL/0.9.7a ipv6 zlib/1.1.4 Host: gdata.youtube.com Pragma: no-cache Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, */* Content-Type:application/atom+xml Authorization: AuthSub token="AIwbFASiRR3XDKsNkaIoPaujN5RQhp5Oy_VA_9U2yV1enxJoVGSgMlZqTcjKw9mS861vlc9GWTH9D9sQ" X-Gdata-Key:key="AI39si5EQyo-TZPFAnmGjxJGFKpxd_7a6hEERh_3......R82AShoQ" Content-Length:0 GData-Version:2 Recevied Response: 401 Token invalid - Invalid AuthSub token. Curl command used: /usr/bin/curl -S -v --location http://gdata.youtube.com/action/GetUploadToken -H Content-Type:application/atom+xml -H Authorization: AuthSub token="AIwbFASiRR3XDKs....sYDp5Oy_VA_9U2yV1enxJoVGSgMlZqTcjKw9mS861vlc9GWTH9D9sQ" -H X-Gdata-Key:key="AI39si5EQyo-TZPFAnmGjxJGF......Kpxd6dN2J1oHFQYTj_7a6hEERh_3E48R82AShoQ" -H Content-Length:0 -H GData-Version:2

    Read the article

  • Stumped by "The remote server returned an error: (403) Forbidden" with WCF Service in https

    - by RJ
    I have a WCF Service that I have boiled down to next to nothing because of this error. It is driving me up the wall. Here's what I have now. A very simple WCF service with one method that returns a string with the value, "test". A very simple Web app that uses the service and puts the value of the string into a label. A web server running IIS 6 on Win 2003 with a SSL certificate. Other WCF services on the same server that work. I publish the WCF service to it's https location I run the web app in debug mode in VS and it works perfectly. I publish the web app to it's https location on the same server the WCF service resides under the same SSL certificate I get, "The remote server returned an error: (403) Forbidden" I have changed almost every setting in IIS as well as the WCF and Web apps to no avail. I have compared setting in the WCF services that work and everything is the same. Below are the setting in the web.config for the WCF Service and the WEB app: It appears the problem has to do with the Web app but I am out of ideas. Any ideas: WCF Service: <system.serviceModel> <bindings> <client /> <services> <service behaviorConfiguration="Ucf.Smtp.Wcf.SmtpServiceBehavior" name="Ucf.Smtp.Wcf.SmtpService"> <host> <baseAddresses> <add baseAddress="https://test.net.ucf.edu/webservices/Smtp/" /> </baseAddresses> </host> <endpoint address="" binding="wsHttpBinding" contract="Ucf.Smtp.Wcf.ISmtpService" bindingConfiguration="SSLBinding"> <identity> <dns value="localhost"/> </identity> </endpoint> <endpoint address="mex" binding="mexHttpsBinding" contract="IMetadataExchange"/> </service> </services> <behaviors> <serviceBehaviors> <behavior name="Ucf.Smtp.Wcf.SmtpServiceBehavior"> <serviceMetadata httpsGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="true" httpsHelpPageEnabled="True"/> </behavior> </serviceBehaviors> </behaviors> Web App: <system.serviceModel> <bindings><wsHttpBinding> <binding name="WSHttpBinding_ISmtpService" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="Transport"> <transport clientCredentialType="None" proxyCredentialType="None" realm="" /> <message clientCredentialType="Windows" negotiateServiceCredential="true" establishSecurityContext="true" /> </security> </binding> <client> <endpoint address="https://net228.net.ucf.edu/webservices/smtp/SmtpService.svc" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_ISmtpService" contract="SmtpService.ISmtpService" name="WSHttpBinding_ISmtpService"> <identity> <dns value="localhost" /> </identity> </client> </system.serviceModel>

    Read the article

  • Getting a null reference exception exporting a slightly complex rdlc report to excel

    - by George Handlin
    Have an issue in exporting a slightly complex report to excel from an rdlc. Exporting a simple tabular report works fine, but getting a null reference exception with a more complex one. As is usually the case, it works on the server in the development environment, but not in the test environment. The server in the development environment has iis, sql and sql reporting services on it and test only has iis (I didn't set them up). I'm guessing there is something that gets installed with SSRS that is not installed with just the report viewer. The report has several parameters going into it and a few generic lists going in for datasources. Some tables for display as well as a list. Working with the 2005 version. Exception follows: [NullReferenceException: Object reference not set to an instance of an object.] Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderPageLayout(PageLayout pageLayout, Int32& currentPageNumber, Stack& stack) +91 Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderPageCollection(PageCollection pageCollection, Int32& currentPageNumber, Stack& stack, PageLayout& lastPageLayout) +607 Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.GenerateWorkSheets() +150 Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.GenerateMainSheet() +358 Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.RenderExcelWorkBook(CreateAndRegisterStream createAndRegisterStream) +158 Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.ProcessReport(CreateAndRegisterStream createAndRegisterStream) +385 Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo, NameValueCollection clientCapabilities, EvaluateHeaderFooterExpressions evaluateHeaderFooterExpressions, CreateAndRegisterStream createAndRegisterStream) +230 [ReportRenderingException: An error occurred during rendering of the report.] Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo, NameValueCollection clientCapabilities, EvaluateHeaderFooterExpressions evaluateHeaderFooterExpressions, CreateAndRegisterStream createAndRegisterStream) +296 Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderSnapshot(IRenderingExtension renderer, CreateReportChunk createChunkCallback, RenderingContext rc, GetResource getResourceCallback) +1124 [WrapperReportRenderingException: An error occurred during rendering of the report.] Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderSnapshot(IRenderingExtension renderer, CreateReportChunk createChunkCallback, RenderingContext rc, GetResource getResourceCallback) +1681 Microsoft.Reporting.LocalService.RenderWithDataCache(PreviewItemContext itemContext, ParameterInfoCollection reportParameters, IEnumerable dataSources, DatasourceCredentialsCollection credentials, IRenderingExtension renderer, ReportProcessing repProc, CreateAndRegisterStream createStreamCallback, ReportRuntimeSetup runtimeSetup) +1693 Microsoft.Reporting.LocalService.Render(PreviewItemContext itemContext, Boolean allowInternalRenderers, ParameterInfoCollection reportParameters, IEnumerable dataSources, DatasourceCredentialsCollection credentials, CreateAndRegisterStream createStreamCallback, ReportRuntimeSetup runtimeSetup, ProcessingMessageList& warnings) +227 Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, CreateAndRegisterStream createStreamCallback, Warning[]& warnings) +235 [LocalProcessingException: An error occurred during local report processing.] Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, CreateAndRegisterStream createStreamCallback, Warning[]& warnings) +276 Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings) +189 Microsoft.Reporting.WebForms.LocalReport.Render(String format, String deviceInfo, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings) +28 Microsoft.Reporting.WebForms.LocalReportControlSource.RenderReport(String format, String deviceInfo, NameValueCollection additionalParams, String& mimeType, String& fileNameExtension) +52 Microsoft.Reporting.WebForms.ExportOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response) +153 Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context) +202 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +303 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64

    Read the article

  • Silverlight 3 Dynamic DataGrid RowStyle Ignored

    - by antoinne85
    I subclassed the standard DataGrid into SpecialDataGrid so I could override the KeyDown/KeyUp events. Other than that SpecialDataGrid is exactly the same as DataGrid. At run-time I dynamically create a bunch of these SpecialDataGrids. When a user clicks a row in the grid it hightlights, which is fine, but when that grid loses focus, it leaves a residual gray highlight on the last-selected row, which is not fine. I've heavily edited the RowStyle and CellStyle I'm applying to these Grids to more-or-less remove all formatting. I even added a static SpecialDataGrid to the app with test data so I could see if the RowStyle was somehow incorrect, applying the same RowStyle and CellStyle that I'm applying to the dynamically generated one (you'll see it in the code below). What I saw was that the "test grid" showed up exactly as I wanted, and the real grid is ignoring part of the RowStyle! Has anyone run into this issue or have any ideas of how to correct it? Some source and images follow. Creating the SpecialDataGrid: //Set up a datagrid. SpecialDataGrid radio_datagrid = new SpecialDataGrid(); radio_datagrid.ItemsSource = radios; radio_datagrid.AutoGenerateColumns = false; radio_datagrid.HeadersVisibility = DataGridHeadersVisibility.None; radio_datagrid.BorderThickness = new Thickness(0); radio_datagrid.HorizontalAlignment = HorizontalAlignment.Stretch; radio_datagrid.IsReadOnly = true; radio_datagrid.MouseLeftButtonUp += new MouseButtonEventHandler(option_datagrid_MouseLeftButtonUp); radio_datagrid.KeyDown += new KeyEventHandler(radio_datagrid_KeyDown); radio_datagrid.KeyUp += new KeyEventHandler(radio_datagrid_KeyUp); //Radio column. DataGridTemplateColumn temp_col = new DataGridTemplateColumn(); temp_col.CellTemplate = (DataTemplate)this.Resources["RadioColumnTemplate"]; temp_col.Width = new DataGridLength(20); radio_datagrid.Columns.Add(temp_col); //Description column. DataGridTextColumn txt_col = new DataGridTextColumn(); txt_col.Binding = new Binding("optionlabel"); txt_col.Width = new DataGridLength(350); radio_datagrid.Columns.Add(txt_col); //Product code column. txt_col = new DataGridTextColumn(); txt_col.Binding = new Binding("optioncode"); txt_col.Width = new DataGridLength(80); radio_datagrid.Columns.Add(txt_col); //Price column. txt_col = new DataGridTextColumn(); txt_col.Binding = new Binding("optionprice"); txt_col.Width = new DataGridLength(80); radio_datagrid.Columns.Add(txt_col); //View column. temp_col = new DataGridTemplateColumn(); temp_col.CellTemplate = (DataTemplate)this.Resources["HyperlinkButtonColumnTemplate"]; temp_col.Width = new DataGridLength(30); radio_datagrid.Columns.Add(temp_col); radio_datagrid.RowStyle = (Style)this.Resources["StyleDataGridRowNoAlternating"]; radio_datagrid.CellStyle = (Style)this.Resources["Style_DataGridCell_NoHighlight"]; Example Image: The lower DataGrid appears that way regardless of what you do to it. No highlighting of any sort and certainly no residual highlights. Any idea what's keeping this from being applied to the first?

    Read the article

  • .NET SerialPort DataReceived event not firing

    - by Klay
    I have a WPF test app for evaluating event-based serial port communication (vs. polling the serial port). The problem is that the DataReceived event doesn't seem to be firing at all. I have a very basic WPF form with a TextBox for user input, a TextBlock for output, and a button to write the input to the serial port. Here's the code: public partial class Window1 : Window { SerialPort port; public Window1() { InitializeComponent(); port = new SerialPort("COM2", 9600, Parity.None, 8, StopBits.One); port.DataReceived += new SerialDataReceivedEventHandler(port_DataReceived); port.Open(); } void port_DataReceived(object sender, SerialDataReceivedEventArgs e) { Debug.Print("receiving!"); string data = port.ReadExisting(); Debug.Print(data); outputText.Text = data; } private void Button_Click(object sender, RoutedEventArgs e) { Debug.Print("sending: " + inputText.Text); port.WriteLine(inputText.Text); } } Now, here are the complicating factors: The laptop I'm working on has no serial ports, so I'm using a piece of software called Virtual Serial Port Emulator to setup a COM2. VSPE has worked admirably in the past, and it's not clear why it would only malfunction with .NET's SerialPort class, but I mention it just in case. When I hit the button on my form to send the data, my Hyperterminal window (connected on COM2) shows that the data is getting through. Yes, I disconnect Hyperterminal when I want to test my form's ability to read the port. I've tried opening the port before wiring up the event. No change. I've read through another post here where someone else is having a similar problem. None of that info has helped me in this case. EDIT: Here's the console version (modified from http://mark.michaelis.net/Blog/TheBasicsOfSystemIOPortsSerialPort.aspx): class Program { static SerialPort port; static void Main(string[] args) { port = new SerialPort("COM2", 9600, Parity.None, 8, StopBits.One); port.DataReceived += new SerialDataReceivedEventHandler(port_DataReceived); port.Open(); string text; do { text = Console.ReadLine(); port.Write(text + "\r\n"); } while (text.ToLower() != "q"); } public static void port_DataReceived(object sender, SerialDataReceivedEventArgs args) { string text = port.ReadExisting(); Console.WriteLine("received: " + text); } } This should eliminate any concern that it's a Threading issue (I think). This doesn't work either. Again, Hyperterminal reports the data sent through the port, but the console app doesn't seem to fire the DataReceived event. EDIT #2: I realized that I had two separate apps that should both send and receive from the serial port, so I decided to try running them simultaneously... If I type into the console app, the WPF app DataReceived event fires, with the expected threading error (which I know how to deal with). If I type into the WPF app, the console app DataReceived event fires, and it echoes the data. I'm guessing the issue is somewhere in my use of the VSPE software, which is set up to treat one serial port as both input and output. And through some weirdness of the SerialPort class, one instance of a serial port can't be both the sender and receiver. Anyway, I think it's solved.

    Read the article

< Previous Page | 637 638 639 640 641 642 643 644 645 646 647 648  | Next Page >