Search Results

Search found 16947 results on 678 pages for 'kernel programming'.

Page 642/678 | < Previous Page | 638 639 640 641 642 643 644 645 646 647 648 649  | Next Page >

  • Permission Mystery - apt-get and other system utilities have 000 permissions

    - by emteh
    I'm trying to track down this strange behavoir for years now. Always after installing software-updates the permissions of a lot of system-tools are broken as you can see below. I am reasonable convinced that the machine is not owned by someone else. Regular security updates + grsecurity kernel + pax + daily rkhunter runs. Besides that there is no incentive for an attacker to fiddle in such obvious ways with the system. I installed bastille linux (http://bastille-linux.sourceforge.net/) und tried to deinstall it later, so the problems could be related to that. However I don't see how this can happen in a regular way after updates. System: Ubuntu 10.04, recently updated to Ubuntu 12.04 but the problem persists. Apt-Configuration in /etc/apt/ looks sane to me. But nevertheless - could here be the source of the trouble? DPkg::Pre-Install-Pkgs {"/usr/sbin/dpkg-preconfigure --apt || true";}; DPkg::Post-Invoke { "if [ -x /usr/bin/debsums ]; then /usr/bin/debsums -- generate=nocheck -sp /var/cache/apt/archives; fi"; }; // Makes sure that rkhunter file properties database is updated // after each remove or install only APT_AUTOGEN is enabled DPkg::Post-Invoke { "if [ -x /usr/bin/rkhunter ] && grep -qiE '^APT_AUTOGEN=.? (true|yes)' /etc/default/rkhunter; then /usr/share/rkhunter/scripts/rkhupd.sh; fi" } DPkg::Post-Invoke {"if [ -d /var/lib/update-notifier ]; then touch /var/lib/update- notifier/dpkg-run-stamp; fi; if [ -e /var/lib/update-notifier/updates-available ]; then echo > /var/lib/update-notifier/updates-available; fi "; }; Where do these chmod 000 come from? I'm feeling really uneasy with this problem. root@besen:~# find /usr/bin/ -perm 0 -ls 14721496 196 ---------- 1 root root 192592 Oct 15 11:58 /usr/bin/apt-get 14721144 68 ---------- 1 root root 63848 Sep 13 00:29 /usr/bin/gpasswd root@besen:~# find /usr/sbin/ -perm 0 -ls 1727732 92 ---------- 1 root root 86984 Sep 13 00:29 /usr/sbin/usermod 1727727 64 ---------- 1 root root 57640 Sep 13 00:29 /usr/sbin/userdel 1727719 64 ---------- 1 root root 57680 Sep 13 00:29 /usr/sbin/newusers 1727718 40 ---------- 1 root root 38632 Sep 13 00:29 /usr/sbin/grpunconv 1727728 48 ---------- 1 root root 47088 Sep 13 00:29 /usr/sbin/groupadd 1727724 32 ---------- 1 root root 29584 Sep 13 00:29 /usr/sbin/pwunconv 19031620 84 ---------- 1 root root 81880 Jan 3 2012 /usr/sbin/edquota 14877113 48 ---------- 1 root root 46880 Sep 13 00:29 /usr/sbin/grpck 1727722 40 ---------- 1 root root 38632 Sep 13 00:29 /usr/sbin/pwck 1727730 96 ---------- 1 root root 91464 Sep 13 00:29 /usr/sbin/useradd 19031619 16 ---------- 1 root root 14600 Jan 3 2012 /usr/sbin/quotastats 1727720 44 ---------- 1 root root 42760 Sep 13 00:29 /usr/sbin/groupdel 1727733 36 ---------- 1 root root 34504 Sep 13 00:29 /usr/sbin/pwconv 19031621 80 ---------- 1 root root 77632 Jan 3 2012 /usr/sbin/rpc.rquotad 19030041 76 ---------- 1 root root 73600 Jan 3 2012 /usr/sbin/repquota 1727731 40 ---------- 1 root root 38624 Sep 13 00:29 /usr/sbin/grpconv 1727725 56 ---------- 1 root root 49472 Sep 13 00:29 /usr/sbin/vipw 1727723 64 ---------- 1 root root 57672 Sep 13 00:29 /usr/sbin/groupmod root@besen:~# find /sbin/ -perm 0 -ls 16760927 76 ---------- 1 root root 73464 Jan 3 2012 /sbin/quotaon Any tipps? I really can't pinpoint the problem in more detail. It happens after installing updates but I can't find no hooks in the dpkg/apt system.

    Read the article

  • How to free up space on RHEL6 /boot safely?

    - by ams
    I am trying to do yum update on RHEL 6 box and I am getting this error message Transaction Check Error: installing package kernel-2.6.32-279.9.1.el6.x86_64 needs 10MB on the /boot filesystem installing package grub-1:0.97-77.el6.x86_64 needs 10MB on the /boot filesystem Error Summary ------------- Disk Requirements: At least 10MB more space needed on the /boot filesystem. My /boot has the following # ls -lah /boot total 74M dr-xr-xr-x. 5 root root 2.0K Jun 10 08:05 . drwxr-xr-x. 23 root root 4.0K Aug 27 03:08 .. -rw-r--r-- 1 root root 99K Apr 26 12:53 config-2.6.32-220.17.1.el6.x86_64 -rw-r--r-- 1 root root 99K Feb 10 2012 config-2.6.32-220.7.1.el6.x86_64 -rw-r--r--. 1 root root 99K Nov 9 2011 config-2.6.32-220.el6.x86_64 drwxr-xr-x. 3 root root 1.0K Mar 29 2012 efi drwxr-xr-x. 2 root root 1.0K Jun 10 07:53 grub -rw-r--r-- 1 root root 15M Jun 10 07:53 initramfs-2.6.32-220.17.1.el6.x86_64.img -rw-r--r-- 1 root root 15M Mar 29 2012 initramfs-2.6.32-220.7.1.el6.x86_64.img -rw-r--r--. 1 root root 15M Mar 29 2012 initramfs-2.6.32-220.el6.x86_64.img -rw------- 1 root root 3.4M Jun 10 08:06 initrd-2.6.32-220.17.1.el6.x86_64kdump.img -rw------- 1 root root 3.5M Jun 10 07:53 initrd-2.6.32-220.7.1.el6.x86_64kdump.img -rw------- 1 root root 3.4M Mar 29 2012 initrd-2.6.32-220.el6.x86_64kdump.img drwx------. 2 root root 12K Mar 29 2012 lost+found -rw-r--r-- 1 root root 168K Apr 26 12:55 symvers-2.6.32-220.17.1.el6.x86_64.gz -rw-r--r-- 1 root root 168K Feb 10 2012 symvers-2.6.32-220.7.1.el6.x86_64.gz -rw-r--r--. 1 root root 168K Nov 9 2011 symvers-2.6.32-220.el6.x86_64.gz -rw-r--r-- 1 root root 2.3M Apr 26 12:53 System.map-2.6.32-220.17.1.el6.x86_64 -rw-r--r-- 1 root root 2.3M Feb 10 2012 System.map-2.6.32-220.7.1.el6.x86_64 -rw-r--r--. 1 root root 2.3M Nov 9 2011 System.map-2.6.32-220.el6.x86_64 -rwxr-xr-x 1 root root 3.8M Apr 26 12:53 vmlinuz-2.6.32-220.17.1.el6.x86_64 -rw-r--r-- 1 root root 171 Apr 26 12:53 .vmlinuz-2.6.32-220.17.1.el6.x86_64.hmac -rwxr-xr-x 1 root root 3.8M Feb 10 2012 vmlinuz-2.6.32-220.7.1.el6.x86_64 -rw-r--r-- 1 root root 170 Feb 10 2012 .vmlinuz-2.6.32-220.7.1.el6.x86_64.hmac -rwxr-xr-x. 1 root root 3.8M Nov 9 2011 vmlinuz-2.6.32-220.el6.x86_64 -rw-r--r--. 1 root root 166 Nov 9 2011 .vmlinuz-2.6.32-220.el6.x86_64.hmac here is the disk usage on boot # du -h 13K ./lost+found 282K ./grub 247K ./efi/EFI/redhat 249K ./efi/EFI 251K ./efi 75M . Problem is that when I got this severer at my ISP I used their default image for RHEL 6 which only allocates 100MB for /boot clearly this is not enough. How can I get around this problem, is it safe to delete any of the above files some of them seem to be on the disk more than once? Is there some way of expand /boot without re-imaging the machine?

    Read the article

  • How can I recover an ext4 filesystem corrupted after a fsck?

    - by Regan
    I have an ext4 filesystem on luks over software raid5. The filesystem was operating "just fine" for several years when I was beginning to run out of space. I had a 9T volume on 6x2T drives. I began upgrading to 3T drives by doing the mdadm fail, remove, add, rebuild, repeat process until I had a larger array. I then grew the luks container, and then when I unmounted and tried to resize2fs I was given the message the filesystem was dirty and needed e2fsck. Without thinking I just did e2fsck -y /dev/mapper/candybox and it began spewing all kinds of inode being removed type messages (can't remember exactly) I killed e2fsck and tried to remount the filesystem to backup data I was concerned about. When trying to mount at this point I get: # mount /dev/mapper/candybox /candybox mount: wrong fs type, bad option, bad superblock on /dev/mapper/candybox, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Looking back at my older logs I noticed the filesystem was giving this error each time the machine booted: kernel: [79137.275531] EXT4-fs (dm-2): warning: mounting fs with errors, running e2fsck is recommended So shame on me for not paying attention :( I then tried to mount using every backup superblock (one after another) and each attempt left this in my log: EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 0 failed (26534!=65440) EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 1 failed (38021!=36729) EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 2 failed (18336!=39845) ... EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 11911 failed (28743!=44098) BUG: soft lockup - CPU#0 stuck for 23s! [mount:2939] Attempts to restart e2fsck results in: # e2fsck /dev/mapper/candybox e2fsck 1.41.14 (22-Dec-2010) e2fsck: Group descriptors look bad... trying backup blocks... candy: recovering journal e2fsck: unable to set superblock flags on candy At this point, I decided it best to order some more drives and make an image using ddrescue Now two weeks later I have an image of the luks partition in a .img file. # ls -lh total 14T -rw-r--r-- 1 root root 14T Oct 25 01:57 candybox.img -rw-r--r-- 1 root root 271 Oct 20 14:32 candybox.logfile After numerous attempts using everything I could find online I could not coerce e2fsck to do anything on the image, so I used mkfs.ext4 -L candy candybox.img -m 0 -S and I was able to mount the dirty filesystem readonly without the journal and recover 960G of data. It gave all kinds of errors of various directories not existing and so forth but I was able to get some stuff. Which gave me some hope! I then ran e2fsck again and it had to recreate the root inode and gave a massive list of correcting group counts, I accepted the root inode creation and said no to everything else, leaving a completely empty filesystem. Re-ran again and said yes to all questions with the same result but now a "clean" but empty filesystem. extundelete gives me 0 recoverable inodes found. And now I'm stuck again, I can't come up with any other methods other than dropping to something like photorec which will give me an absolute mess with how large the filesystem was. I'm willing to re-copy the image from the original array and start over, if I can get any suggestions or ideas on a way to get more of my files back. I wish I could give more detailed logs of the commands that have run, but the output is long scrolled passed except for what gets logged to syslog and my memory is not as detailed due to the timeframe this has occurred over. Any help is greatly appreciated!

    Read the article

  • Choice of an OS for a home ZFS NAS

    - by OlafM
    I am preparing a home NAS with an old Athlon 64 X2 3800+, 4 GB ECC RAM, Asus M2V MX motherboard, and a single 3 TB WDC Green (another one as mirror may be installed in the future). It's the cheapest solution I found that includes ECC memory and the higher energy consumption is offset by the lower (zero) cost of acquisition. The system will be used for: music storage and stream to other desktop computers; storage of the scanned dia slides (3-4k slides, 180 MB TIFF each one plus reduced quality JPEG version); stream of these photos to a local iPad 2 (maybe Plex App? not yet sure); (one additional) remote backup via rsync/ssh or ZFS send/receive. It will be controlled via remote ssh, maybe VNC, no monitor attached. Absolute requirement is a reliable ZFS solution, plus the ability to easily install packets/software/virtual machines and to update remotely (I will be the admin and I don't live near the NAS). I have mainly three options: NAS4free/FreeNAS OpenIndiana Solaris Express 11 (yeah yeah I know the license requirements, I will write a perl script on it to count it as development machine). Problems: NAS4free/FreeNAS (I tested only NAS4free) required embedded installation for remote upgrading, but full install for easy addition of software packets. Since I need at least AirVideo Server (linux/win) and Plex App (win/linux) to stream the photos and some videos to iPad (they both require virtualbox), but I cannot be there to install updates, NAS4free/FreeNAS are excluded. http://www.nas4free.org/general_information.html explains the issue: embedded can be remotely updated, full cannot. Solaris has also another advantage: Crashplan client supports Solaris and I'm already using it for other backups. I would like to leave the option open, even if I will be doing backups probably through zfs send/receive. NexentaStor was left out because zfs send/receive are not included in the free version. The question is now Solaris 11 Express over OpenIndiana. To ease the management, I will be using http://www.napp-it.org Which one would you suggest and why? I found lots of informations and it's difficult for me to decide. I think (from the napp-it manual) that Solaris has some additional options for SMB shares, but are they really needed at home? I think I won't even use ACLs, since normal unix-style permissions are enough. OpenIndiana has maybe more frequent updates (Solaris offers only security updates between releases), but again, do I need them? I don't think so. Moreover, this is a NAS that has to work and nothing else, I cannot risk having problems that require me to access the server. Isn't OpenIndiana a bit more... cutting edge (in the Solaris world)? I'm just asking, no need to focus on this for the answer :-) I would limit myself to these two options (SE11.1/OI) also because I will be making a NAS for me in the future (where high performances with Mac shares are also required) and Solaris has kernel support for AFP. I will use this server to gather experience as well. After this long question, thanks in advance! If you need additional info, let me know and I will update this post. UPDATES Given the first answers, I will strongly suggest the person paying the hardware to insert a second HD. Better 2x2TB than 1x3TB (3 TB is oversized anyway). I was trying to keep the initial costs down to spread them over a longer period, but better having something good from the beginning.

    Read the article

  • What are the most likely bottlenecks determining the performance of CamStudio screen recording?

    - by Steve314
    When doing screen recording, I can get a frame rate of maybe 15 frames per second for the full screen on my 1080p monitor using the XVID codec. I can increase the speed a bit by recording a region, changing screen modes, and tweaking other settings, but I'm curious what hardware upgrades might give me the biggest bang for my buck. My PC is budget, but modern... Athlon 2 X4 645 (3.1GHz, quad core, limited cache) processor. 4GB single channel DDR3 1066 RAM. ASRock motherboard with NVidia GeForce 7025/nForce 630a Chipset. ATI Radeon HD 5450 graphics card - 512MB on board, not configured to steal system RAM. I dual-boot Windows XP and Windows 7. For the moment, XP is my bigger performance concern as it's still my getting-things-done O/S as opposed to my browser-host O/S. My goal is to make a few programming-related tutorials. For a lot of that I don't need screen recording - I can make up some slides, record audio with the PC switched off, yada yada. When I do need screen recording, I'll mostly be recording Notepad++, Visual Studio or a command prompt. Occasionally, I may be recording some kind of graphics or diagram program and using my pre-Bamboo cheap Wacom tablet - I have the CS2 versions of Photoshop and Illustrator, but I'd much more likely be using Microsoft Paint. Basically, what I'll be recording won't be making huge demands on the machine - but recording a fair number of pixels (720p preferred) will be useful. What's particularly wierd - not so long ago I still had a five-year-old Pentium 4 based PC. And (with the same 1080p monitor) it could record at not far from the same frame rate. So clearly the performance issues are more subtle than just throw-money-at-it. My first guess would be that the main bottleneck is the bandwidth for transferring data to/from the graphics card. Is that likely to be correct? In support of that, see this [Radeon HD 5450 review][1] - the memory bandwidth is only 12.8 GB/s. If you can't get data out of graphics memory quickly, you can't transfer it back to the system memory quickly. Apparently, that's slower than some top-end cards in 2002.

    Read the article

  • "ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver" wheel-click is wrong

    - by sputnick
    I use this mouse under archlinux x86_64 with 3.2.8-1-ARCH kernel. I have some problems to select and then paste with the wheel-click in some applications like konversation, not in a terminal nor an editor. I don't know if it's a hardware problem or a software one. $ lsusb -v Bus 002 Device 110: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x046d Logitech, Inc. idProduct 0xc50e Cordless Mouse Receiver bcdDevice 25.10 iManufacturer 1 Logitech iProduct 2 USB RECEIVER iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 70mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 95 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) When I see what's happens in xev, the output is different compared to another mouse My buggy Logitech mouse : ButtonPress event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x4400002, time 170350700, (48,52), root:(1491,75), state 0x10, button 11, same_screen YES EnterNotify event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x0, time 170350700, (48,52), root:(1491,75), mode NotifyGrab, detail NotifyInferior, same_screen YES, focus YES, state 16 KeymapNotify event, serial 40, synthetic NO, window 0x0, keys: 90 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ButtonPress event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x4400002, time 170350716, (48,52), root:(1491,75), state 0x10, button 6, same_screen YES ButtonRelease event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x4400002, time 170350716, (48,52), root:(1491,75), state 0x10, button 6, same_screen YES ButtonRelease event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x4400002, time 170350988, (48,52), root:(1491,75), state 0x10, button 11, same_screen YES LeaveNotify event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x0, time 170350988, (48,52), root:(1491,75), mode NotifyUngrab, detail NotifyInferior, same_screen YES, focus YES, state 16 a working mouse (dell) : ButtonPress event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x4400002, time 170245131, (46,32), root:(1489,55), state 0x10, button 2, same_screen YES EnterNotify event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x0, time 170245131, (46,32), root:(1489,55), mode NotifyGrab, detail NotifyInferior, same_screen YES, focus YES, state 528 KeymapNotify event, serial 40, synthetic NO, window 0x0, keys: 90 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ButtonRelease event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x4400002, time 170245411, (46,32), root:(1489,55), state 0x210, button 2, same_screen YES LeaveNotify event, serial 40, synthetic NO, window 0x4400001, root 0x15a, subw 0x0, time 170245411, (46,32), root:(1489,55), mode NotifyUngrab, detail NotifyInferior, same_screen YES, focus YES, state 16 A demo of the problem when I use konversation (IRC) : http://www.youtube.com/watch?v=lhmr92M7NCc I tried to modify the button map with xmodmap like this with no success (one at a time) : xmodmap -e "pointer = 1 0 3" xmodmap -e "pointer = 1 1 3" xmodmap -e "pointer = 1 2 3" xmodmap -e "pointer = 1 3 3" xmodmap -e "pointer = 1 4 3" xmodmap -e "pointer = 1 5 3" xmodmap -e "pointer = 1 6 3" xmodmap -e "pointer = 1 7 3" xmodmap -e "pointer = 1 8 3" xmodmap -e "pointer = 1 9 3" xmodmap -e "pointer = 1 10 3" xmodmap -e "pointer = 1 11 3" xmodmap -e "pointer = 1 12 3" xmodmap -e "pointer = 1 13 3" xmodmap -e "pointer = 1 14 3" xmodmap -e "pointer = 1 15 3" xmodmap -e "pointer = 1 16 3" xmodmap -e "pointer = 1 17 3" xmodmap -e "pointer = 1 18 3" xmodmap -e "pointer = 1 19 3" xmodmap -e "pointer = 1 20 3" xmodmap -e "pointer = 1 21 3" xmodmap -e "pointer = 1 22 3" xmodmap -e "pointer = 1 23 3" xmodmap -e "pointer = 1 24 3" xmodmap -e "pointer = 1 25 3" Any clue ? I would like to avoid buying a new mouse just for a paste problem.

    Read the article

  • KVM with one host IP and a different subnet for machines

    - by Jguy
    I've already setup a KVM host with proper IP configurations, but my host had me create DHCP and use that to assign the IP's to the machines. I want to see if there's an easier way to do it (or better). Upon my first setting out on this, I didn't find anything that pointed me in the right direction. I'm coming off a fresh install of Debian 6.0 x64, so I have nothing installed. I've logged in, queried for the below information and changed the password from my host set one. I have a Debian 6.0 x64 system with the following initial network configuration (substituted 255 in place of my real first octave): # tail /etc/network/interfaces auto eth0 iface eth0 inet static address 255.9.24.80 broadcast 255.9.24.95 netmask 255.255.255.224 gateway 255.9.24.65 # default route to access subnet up route add -net 255.9.24.64 netmask 255.255.255.224 gw 255.9.24.65 eth0 I have a /29 subnet that I want the virtual machines to use from my host: IP: 255.46.187.152 /29 Mask: 255.255.255.248 Broadcast: 255.46.187.159 Usable IP addresses: 255.46.187.153 to 255.46.187.158 I like the interface of Cloudmin, so I want to try and use that if I can to administrate my guests. So, my questions: How do I set this up on the host system the best so that I can use the additional Subnet IP's on the guests and have them accessible from the internet? I also need to host a DNS server, which means one of these VM's has to have two IP's assigned to it and accessable from the outside world. How can I do that using Cloudmin? I had a question about this here: Multiple IP addresses assigned to one KVM VM But I just reformatted the entire server and am trying to figure out a better way of doing this. Machine information: # ip route show 255.9.24.64/27 via 255.9.24.65 dev eth0 255.9.24.64/27 dev eth0 proto kernel scope link src 255.9.24.80 default via 255.9.24.65 dev eth0 brctl is empty # ip addr list 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether c8:60:00:54:b5:d8 brd ff:ff:ff:ff:ff:ff inet 255.9.24.80/27 brd 255.9.24.95 scope global eth0 inet6 fe80::ca60:ff:fe54:b5d8/64 scope link valid_lft forever preferred_lft forever Thank you for any help you can provide me. EDIT: I've installed kvm and cloudmin: aptitude install qemu-kvm libvirt-bin wget http://cloudmin.virtualmin.com/gpl/scripts/cloudmin-kvm-debian-install.sh ./cloudmin-kvm-debian-install.sh Rebooted and now my network configuration looks like this: # device: eth0 iface eth0 inet manual # default route to access subnet iface br0 inet static address 255.9.24.80 netmask 255.255.255.224 broadcast 255.9.24.95 network 255.9.24.64 bridge_ports eth0 gateway 255.9.24.65 I setup in Cloudmin the Start IP as 255.46.187.153 and End IP as 255.46.187.158. The CIDR is 29 and the gateway is 255.46.187.152. I've installed a guest with ubuntuserver 12.04 x64, which was able to get and retrieve internet resources during installation, but now cannot reach anything nor can it be reached from anything. Its network configuration is: iface eth0 inet static address 255.46.187.153 netmask 255.255.255.224 broadcast 255.46.187.159 gateway 255.46.187.152 dns-nameservers <host provided nameservers> And is not able to ping google.com through DNS or direct IP, I can't ping the VM from the outside or the host. any ideas now?

    Read the article

  • cakephp & nginx config/rewrite rules

    - by seanl
    Hi somebody please help me out, I've asked this at stackoverflow as well but not got much of a response and was debating whether it was programming or server related. I’m trying to setup a cakephp environment on a Centos server running Nginx with Fact CGI. I already have a wordpress site running on the server and a phpmyadmin site so I have PHP configured correctly. My problem is that I cannot get the rewrite rules setup correct in my vhost so that cake renders pages correctly i.e. with styling and so on. I’ve googled as much as possible and the main consensus from the sites like the one listed below is that I need to have the following rewrite rule in place location / { root /var/www/sites/somedomain.com/current; index index.php index.html; # If the file exists as a static file serve it # directly without running all # the other rewrite tests on it if (-f $request_filename) { break; } if (!-f $request_filename) { rewrite ^/(.+)$ /index.php?url=$1 last; break; } } http://blog.getintheloop.eu/2008/4/17/nginx-engine-x-rewrite-rules-for-cakephp problem is these rewrite assume you run cake directly out of the webroot which is not what I want to do. I have a standard setup for each site i.e. one folder per site containing the following folders log, backup, private and public. Public being where nginx is looking for its files to serve but I have cake installed in private with a symlink in public linking back to /private/cake/ this is my vhost server { listen 80; server_name app.domain.com; access_log /home/public_html/app.domain.com/log/access.log; error_log /home/public_html/app.domain.com/log/error.log; #configure Cake app to run in a sub-directory #Cake install is not in root, but elsewhere and configured #in APP/webroot/index.php** location /home/public_html/app.domain.com/private/cake { index index.php; if (!-e $request_filename) { rewrite ^/(.+)$ /home/public_html/app.domain.com/private/cake/$1 last; break; } } location /home/public_html/app.domain.com/private/cake/ { index index.php; if (!-e $request_filename) { rewrite ^/(.+)$ /home/public_html/app.domain.com/public/index.php?url=$1 last; break; } } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /home/public_html/app.domain.com/private/cake$fastcgi_script_name; include /etc/nginx/fastcgi_params; } } Now like I said I can see the main index.php of cake and have connected it to my DB but this page is without styling so before I proceed any further I would like to configure it correctly. What am I doing wrong………. Thanks seanl

    Read the article

  • Making a ViewFlipper like the Home Screen using MotionEvent.ACTION_MOVE

    - by DJTripleThreat
    Ok I have a ViewFlipper with three LinearLayouts nested inside it. It defaults to showing the first one. This code: // Assumptions in my Activity class: // oldTouchValue is a float // vf is my view flipper @Override public boolean onTouchEvent(MotionEvent touchEvent) { switch (touchEvent.getAction()) { case MotionEvent.ACTION_DOWN: { oldTouchValue = touchEvent.getX(); break; } case MotionEvent.ACTION_UP: { float currentX = touchEvent.getX(); if (oldTouchValue < currentX) { vf.setInAnimation(AnimationHelper.inFromLeftAnimation()); vf.setOutAnimation(AnimationHelper.outToRightAnimation()); vf.showNext(); } if (oldTouchValue > currentX) { vf.setInAnimation(AnimationHelper.inFromRightAnimation()); vf.setOutAnimation(AnimationHelper.outToLeftAnimation()); vf.showPrevious(); } break; } case MotionEvent.ACTION_MOVE: { // TODO: Some code to make the ViewFlipper // act like the home screen. break; } } return false; } public static class AnimationHelper { public static Animation inFromRightAnimation() { Animation inFromRight = new TranslateAnimation( Animation.RELATIVE_TO_PARENT, +1.0f, Animation.RELATIVE_TO_PARENT, 0.0f, Animation.RELATIVE_TO_PARENT, 0.0f, Animation.RELATIVE_TO_PARENT, 0.0f); inFromRight.setDuration(350); inFromRight.setInterpolator(new AccelerateInterpolator()); return inFromRight; } public static Animation outToLeftAnimation() { Animation outtoLeft = new TranslateAnimation( Animation.RELATIVE_TO_PARENT, 0.0f, Animation.RELATIVE_TO_PARENT, -1.0f, Animation.RELATIVE_TO_PARENT, 0.0f, Animation.RELATIVE_TO_PARENT, 0.0f); outtoLeft.setDuration(350); outtoLeft.setInterpolator(new AccelerateInterpolator()); return outtoLeft; } // for the next movement public static Animation inFromLeftAnimation() { Animation inFromLeft = new TranslateAnimation( Animation.RELATIVE_TO_PARENT, -1.0f, Animation.RELATIVE_TO_PARENT, 0.0f, Animation.RELATIVE_TO_PARENT, 0.0f, Animation.RELATIVE_TO_PARENT, 0.0f); inFromLeft.setDuration(350); inFromLeft.setInterpolator(new AccelerateInterpolator()); return inFromLeft; } public static Animation outToRightAnimation() { Animation outtoRight = new TranslateAnimation( Animation.RELATIVE_TO_PARENT, 0.0f, Animation.RELATIVE_TO_PARENT, +1.0f, Animation.RELATIVE_TO_PARENT, 0.0f, Animation.RELATIVE_TO_PARENT, 0.0f); outtoRight.setDuration(350); outtoRight.setInterpolator(new AccelerateInterpolator()); return outtoRight; } } ... handles the view flipping but the animations are very "on/off". I'm wondering if someone can help me out with the last part. Assuming that I can access the LinearLayouts, is there a way where I can set the position of the layouts based on deltaX and deltaY? Someone gave me this link: https://android.git.kernel.org/?p=platform/frameworks/base.git;a=blob;f=core/java/android/view/animation/TranslateAnimation.java;h=d2ff754ac327dda0fe35e610752abb78904fbb66;hb=HEAD and said I should refer to the applyTransformation method for hints on how to do this but I don't know how to repeat this same behavior.

    Read the article

  • How to maximize http.sys file upload performance

    - by anelson
    I'm building a tool that transfers very large streaming data sets (possibly on the order of terabytes in a single stream; routinely in the tens of gigabytes) from one server to another. The client portion of the tool will read blocks from the source disk, and send them over the network. The server side will read these blocks off the network and write them to a file on the server disk. Right now I'm trying to decide which transport to use. Options are raw TCP, and HTTP. I really, REALLY want to be able to use HTTP. The HttpListener (or WCF if I want to go that route) make it easy to plug in to the HTTP Server API (http.sys), and I can get things like authentication and SSL for free. The problem right now is performance. I wrote a simple test harness that sends 128K blocks of NULL bytes using the BeginWrite/EndWrite async I/O idiom, with async BeginRead/EndRead on the server side. I've modified this test harness so I can do this with either HTTP PUT operations via HttpWebRequest/HttpListener, or plain old socket writes using TcpClient/TcpListener. To rule out issues with network cards or network pathways, both the client and server are on one machine and communicate over localhost. On my 12-core Windows 2008 R2 test server, the TCP version of this test harness can push bytes at 450MB/s, with minimal CPU usage. On the same box, the HTTP version of the test harness runs between 130MB/s and 200MB/s depending upon how I tweak it. In both cases CPU usage is low, and the vast majority of what CPU usage there is is kernel time, so I'm pretty sure my usage of C# and the .NET runtime is not the bottleneck. The box has two 6-core Xeon X5650 processors, 24GB of single-ranked DDR3 RAM, and is used exclusively by me for my own performance testing. I already know about HTTP client tweaks like ServicePointManager.MaxServicePointIdleTime, ServicePointManager.DefaultConnectionLimit, ServicePointManager.Expect100Continue, and HttpWebRequest.AllowWriteStreamBuffering. Does anyone have any ideas for how I can get HTTP.sys performance beyond 200MB/s? Has anyone seen it perform this well on any environment?

    Read the article

  • Stata - Multiple rotated plots on graph (including distributions on sides of axes)

    - by meerak
    I would like to produce a single graph containing both: (1) a scatter plot (2) either histograms or kernel density functions of the Y and X variables to the left of the Y axis and below the X axis. I found a graph that does this in MATLAB -- I would just like to produce something similar in Stata: That graph was produced using the following MATLAB code: n = 1000; rho = .7; Z = mvnrnd([0 0], [1 rho; rho 1], n); U = normcdf(Z); X = [gaminv(U(:,1),2,1) tinv(U(:,2),5)]; [n1,ctr1] = hist(X(:,1),20); [n2,ctr2] = hist(X(:,2),20); subplot(2,2,2); plot(X(:,1),X(:,2),'.'); axis([0 12 -8 8]); h1 = gca; title('1000 Simulated Dependent t and Gamma Values'); xlabel('X1 ~ Gamma(2,1)'); ylabel('X2 ~ t(5)'); subplot(2,2,4); bar(ctr1,-n1,1); axis([0 12 -max(n1)*1.1 0]); axis('off'); h2 = gca; subplot(2,2,1); barh(ctr2,-n2,1); axis([-max(n2)*1.1 0 -8 8]); axis('off'); h3 = gca; set(h1,'Position',[0.35 0.35 0.55 0.55]); set(h2,'Position',[.35 .1 .55 .15]); set(h3,'Position',[.1 .35 .15 .55]); colormap([.8 .8 1]); UPDATE: The Stata13 manual entry for "graph combine" has precisely this example (http://www.stata.com/manuals13/g-2graphcombine.pdf). Here is the code: use http://www.stata-press.com/data/r13/lifeexp, clear generate loggnp = log10(gnppc) label var loggnp "Log base 10 of GNP per capita" scatter lexp loggnp, ysca(alt) xsca(alt) xlabel(, grid gmax) fysize(25) saving(yx) twoway histogram lexp, fraction xsca(alt reverse) horiz fxsize(25) saving(hy) twoway histogram loggnp, fraction ysca(alt reverse) ylabel(,nogrid) xlabel(,grid gmax) saving(hx) graph combine hy.gph yx.gph hx.gph, hole(3) imargin(0 0 0 0) graphregion(margin(l=22 r=22)) title("Life expectancy at birth vs. GNP per capita") note("Source: 1998 data from The World Bank Group")

    Read the article

  • Glassfish V3 won't start

    - by Zakaria
    Hi everybody, I installed NetBeans 6.8 and tried to run the GlasshFish V3 server. I'm working under Windows Vista 32 Bits. First, it won't run. Then I modified the c:\Windows\System32\drivers\etc\hosts file and put the following line into it: 127.0.0.1 localhost And when I run the GlasshFish V3 Server, no error is showing but only "INFOs" are displayed: 3 avr. 2010 19:23:19 com.sun.enterprise.glassfish.bootstrap.ASMain main INFO: Launching GlassFish on Felix platform Welcome to Felix ================ INFO: Perform lazy SSL initialization for the listener 'http-listener-2' INFO: Starting Grizzly Framework 1.9.18-k - Sat Apr 03 19:23:24 CEST 2010 INFO: Starting Grizzly Framework 1.9.18-k - Sat Apr 03 19:23:25 CEST 2010 INFO: Grizzly Framework 1.9.18-k started in: 423ms listening on port 35127 INFO: GlassFish v3 (74.2) startup time : Felix(4456ms) startup services(1709ms) total(6165ms) INFO: Grizzly Framework 1.9.18-k started in: 459ms listening on port 35116 INFO: Grizzly Framework 1.9.18-k started in: 428ms listening on port 35155 INFO: Grizzly Framework 1.9.18-k started in: 470ms listening on port 35160 INFO: Grizzly Framework 1.9.18-k started in: 513ms listening on port 35159 INFO: javassist.util.proxy.ProxyFactory.classLoaderProvider = org.glassfish.weld.WeldActivator$GlassFishClassLoaderProvider@5be8f4 INFO: Hibernate Validator bean-validator-3.0-JBoss-4.0.2 INFO: Binding RMI port to *:35165 INFO: Instantiated an instance of org.hibernate.validator.engine.resolver.JPATraversableResolver. INFO: JMXStartupService: Started JMXConnector, JMXService URL = service:jmx:rmi://PC-de-Charlotte:35165/jndi/rmi://PC-de-Charlotte:35165/jmxrmi INFO: Using com.sun.enterprise.transaction.jts.JavaEETransactionManagerJTSDelegate as the delegate INFO: [Thread[GlassFish Kernel Main Thread,5,main]] started INFO: Grizzly Framework 1.9.18-k started in: 150ms listening on port 35159 INFO: Perform lazy SSL initialization for the listener 'http-listener-2' INFO: {felix.fileinstall.poll (ms) = 5000, felix.fileinstall.dir = C:\Program Files\sges-v3\glassfish\modules\autostart, felix.fileinstall.debug = 1, felix.fileinstall.bundles.new.start = true, felix.fileinstall.tmpdir = C:\Users\CHARLO~1\AppData\Local\Temp\fileinstall-330907148519261411, felix.fileinstall.filter = null} INFO: {felix.fileinstall.poll (ms) = 5000, felix.fileinstall.dir = C:\Users\Charlotte\.netbeans\6.8\GlassFish_v3\autodeploy\bundles, felix.fileinstall.debug = 1, felix.fileinstall.bundles.new.start = true, felix.fileinstall.tmpdir = C:\Users\CHARLO~1\AppData\Local\Temp\fileinstall-2938963288421854459, felix.fileinstall.filter = null} INFO: Grizzly Framework 1.9.18-k started in: 95ms listening on port 35160 INFO: Updating configuration from org.apache.felix.fileinstall-autodeploy-bundles.cfg INFO: Installed C:\Program Files\sges-v3\glassfish\modules\autostart\org.apache.felix.fileinstall-autodeploy-bundles.cfg INFO: {felix.fileinstall.poll (ms) = 5000, felix.fileinstall.dir = C:\Users\Charlotte\.netbeans\6.8\GlassFish_v3\autodeploy\bundles, felix.fileinstall.debug = 1, felix.fileinstall.bundles.new.start = true, felix.fileinstall.tmpdir = C:\Users\CHARLO~1\AppData\Local\Temp\fileinstall-6474085409014899009, felix.fileinstall.filter = null} And there is no message such as "Glassfish started"! So, when I try to access to the admin web interface: localhost:4848 or localhost:8080 or localhost:8181 , It doesn't work. What should I do? Thank you very much, Regards.

    Read the article

  • UNIX: Replace Newline w/ Colon, Preserving Newline Before EOF

    - by Maarx
    I have a text file ("INPUT.txt") of the format: A<LF> B<LF> C<LF> D<LF> X<LF> Y<LF> Z<LF> <EOF> which I need to reformat to: A:B:C:D:X:Y:Z<LF> <EOF> I know you can do this with 'sed'. There's a billion google hits for doing this with 'sed'. But I'm trying to emphasis readability, simplicity, and using the correct tool for the correct job. 'sed' is a line editor that consumes and hides newlines. Probably not the right tool for this job! I think the correct tool for this job would be 'tr'. I can replace all the newlines with colons with the command: cat INPUT.txt | tr '\n' ':' There's 99% of my work done. I have a problem, now, though. By replacing all the newlines with colons, I not only get an extraneous colon at the end of the sequence, but I also lose the carriage return at the end of the input. It looks like this: A:B:C:D:X:Y:Z:<EOF> Now, I need to remove the colon from the end of the input. However, if I attempt to pass this processed input through 'sed' to remove the final colon (which would now, I think, be a proper use of 'sed'), I find myself with a second problem. The input is no longer terminated by a newline at all! 'sed' fails outright, for all commands, because it never finds the end of the first line of input! It seems like appending a newline to the end of some input is a very, very common task, and considering I myself was just sorely tempted to write a program to do it in C (which would take about eight lines of code), I can't imagine there's not already a very simple way to do this with the tools already available to you in the Linux kernel.

    Read the article

  • Zero code coverage with cobertura 1.9.2 but tests are working

    - by eraonel
    I run the code coverage target: <junit fork="yes" dir="${basedir}" failureProperty="test.failed"> <!-- Note the classpath order: instrumented classes are before the original (uninstrumented) classes. This is important. --> <classpath path="${instrumented.dir}" /> <classpath path="${classes.dir}" /> <classpath refid="classpath" /> <!-- The instrumented classes reference classes used by the Cobertura runtime, so Cobertura and its dependencies must be on your classpath. --> <classpath refid="cobertura.classpath" /> <formatter type="xml" /> <!--<test name="${testcase}" todir="${reports.xml.dir}" if="testcase" />--> <batchtest fork="yes" todir="${reports.xml.dir}"> <fileset dir="${classes.dir}"> <include name="**/generated/AllTests.class" /> </fileset> </batchtest> </junit> <junitreport todir="${reports.xml.dir}"> <fileset dir="${reports.xml.dir}"> <include name="TEST-*.xml" /> </fileset> <report format="frames" todir="${reports.html.dir}" /> </junitreport> Then I get the following output ( when using fork="true"): java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at net.sourceforge.cobertura.util.FileLocker.lock(FileLocker.java:124) at net.sourceforge.cobertura.coveragedata.ProjectData.saveGlobalProjectData(ProjectData.java:331) at net.sourceforge.cobertura.coveragedata.SaveTimer.run(SaveTimer.java:31) at java.lang.Thread.run(Thread.java:595) Caused by: java.io.IOException: No locks available at sun.nio.ch.FileChannelImpl.lock0(Native Method) at sun.nio.ch.FileChannelImpl.lock(FileChannelImpl.java:784) at java.nio.channels.FileChannel.lock(FileChannel.java:865) ... 8 more --------------------------------------- Unable to get lock on /vobs/rnc/rrt/roam2/roamSs/RoamMao_swb/RoamMao_bldu/ant_build/cobertura.ser.lock: null This is known to happen on Linux kernel 2.6.20. Make sure cobertura.jar is in the root classpath of the jvm process running the instrumented code. If the instrumented code is running in a web server, this means cobertura.jar should be in the web server's lib directory. Don't put multiple copies of cobertura.jar in different WEB-INF/lib directories. Only one classloader should load cobertura. It should be the root classloader. I am using Ant 1.7.0 and cobertura 1.9.2. Any ideas why there is no coverage? Test run ok as I see in my target. I have tried to switch java versions ( 1.5.0_06 and 1.6.0_10) but no difference.

    Read the article

  • How do I classify using SVM Classifier?

    - by Gomathi
    I'm doing a project in liver tumor classification. Actually I initially used Region Growing method for liver segmentation and from that I segmented tumor using FCM. I,then, obtained the texture features using Gray Level Co-occurence Matrix. My output for that was stats = autoc: [1.857855266614132e+000 1.857955341199538e+000] contr: [5.103143332457753e-002 5.030548650257343e-002] corrm: [9.512661919561399e-001 9.519459060378332e-001] corrp: [9.512661919561385e-001 9.519459060378338e-001] cprom: [7.885631654779597e+001 7.905268525471267e+001] Now how should I give this as an input to the SVM program. function [itr] = multisvm( T,C,tst ) %MULTISVM(2.0) classifies the class of given training vector according to the % given group and gives us result that which class it belongs. % We have also to input the testing matrix %Inputs: T=Training Matrix, C=Group, tst=Testing matrix %Outputs: itr=Resultant class(Group,USE ROW VECTOR MATRIX) to which tst set belongs %----------------------------------------------------------------------% % IMPORTANT: DON'T USE THIS PROGRAM FOR CLASS LESS THAN 3, % % OTHERWISE USE svmtrain,svmclassify DIRECTLY or % % add an else condition also for that case in this program. % % Modify required data to use Kernel Functions and Plot also% %----------------------------------------------------------------------% % Date:11-08-2011(DD-MM-YYYY) % % This function for multiclass Support Vector Machine is written by % ANAND MISHRA (Machine Vision Lab. CEERI, Pilani, India) % and this is free to use. email: [email protected] % Updated version 2.0 Date:14-10-2011(DD-MM-YYYY) u=unique(C); N=length(u); c4=[]; c3=[]; j=1; k=1; if(N>2) itr=1; classes=0; cond=max(C)-min(C); while((classes~=1)&&(itr<=length(u))&& size(C,2)>1 && cond>0) %This while loop is the multiclass SVM Trick c1=(C==u(itr)); newClass=c1; svmStruct = svmtrain(T,newClass); classes = svmclassify(svmStruct,tst); % This is the loop for Reduction of Training Set for i=1:size(newClass,2) if newClass(1,i)==0; c3(k,:)=T(i,:); k=k+1; end end T=c3; c3=[]; k=1; % This is the loop for reduction of group for i=1:size(newClass,2) if newClass(1,i)==0; c4(1,j)=C(1,i); j=j+1; end end C=c4; c4=[]; j=1; cond=max(C)-min(C); % Condition for avoiding group %to contain similar type of values %and the reduce them to process % This condition can select the particular value of iteration % base on classes if classes~=1 itr=itr+1; end end end end Kindly guide me. Images:

    Read the article

  • How can I have a Makefile automatically rebuild source files that include a modified header file? (I

    - by Nicholas Flynt
    I have the following makefile that I use to build a program (a kernel, actually) that I'm working on. Its from scratch and I'm learning about the process, so its not perfect, but I think its powerful enough at this point for my level of experience writing makefiles. AS = nasm CC = gcc LD = ld TARGET = core BUILD = build SOURCES = source INCLUDE = include ASM = assembly VPATH = $(SOURCES) CFLAGS = -Wall -O -fstrength-reduce -fomit-frame-pointer -finline-functions \ -nostdinc -fno-builtin -I $(INCLUDE) ASFLAGS = -f elf #CFILES = core.c consoleio.c system.c CFILES = $(foreach dir,$(SOURCES),$(notdir $(wildcard $(dir)/*.c))) SFILES = assembly/start.asm SOBJS = $(SFILES:.asm=.o) COBJS = $(CFILES:.c=.o) OBJS = $(SOBJS) $(COBJS) build : $(TARGET).img $(TARGET).img : $(TARGET).elf c:/python26/python.exe concat.py stage1 stage2 pad.bin core.elf floppy.img $(TARGET).elf : $(OBJS) $(LD) -T link.ld -o $@ $^ $(SOBJS) : $(SFILES) $(AS) $(ASFLAGS) $< -o $@ %.o: %.c @echo Compiling $<... $(CC) $(CFLAGS) -c -o $@ $< #Clean Script - Should clear out all .o files everywhere and all that. clean: -del *.img -del *.o -del assembly\*.o -del core.elf My main issue with this makefile is that when I modify a header file that one or more C files include, the C files aren't rebuilt. I can fix this quite easily by having all of my header files be dependencies for all of my C files, but that would effectively cause a complete rebuild of the project any time I changed/added a header file, which would not be very graceful. What I want is for only the C files that include the header file I change to be rebuilt, and for the entire project to be linked again. I can do the linking by causing all header files to be dependencies of the target, but I cannot figure out how to make the C files be invalidated when their included header files are newer. I've heard that GCC has some commands to make this possible (so the makefile can somehow figure out which files need to be rebuilt) but I can't for the life of me find an actual implementation example to look at. Can someone post a solution that will enable this behavior in a makefile? EDIT: I should clarify, I'm familiar with the concept of putting the individual targets in and having each target.o require the header files. That requires me to be editing the makefile every time I include a header file somewhere, which is a bit of a pain. I'm looking for a solution that can derive the header file dependencies on its own, which I'm fairly certain I've seen in other projects.

    Read the article

  • Runtime.exec causes duplicate JVM to hang indefinitely until killed (Solaris 10)

    - by John
    All, We are running a J2EE application on WebLogic server 9.2 MP2 with a jrockit 64-bit JVM (27.3.1) on Solaris 10. We call use runtime.exec to call an executable called jfmerge to create PDF documents. We have found that in Solaris, when runtime.exec is called, a duplicate JVM is temporarily spawned to kick off the jfmerge process. While this is inefficient (our JVM is 5 GB, thus the duplicated shell JVM is also 5 GB), the major problem lies in the fact that when there is heavy load on this functionality (PDF generation) in our application, sometimes the duplicated JVM never exits. When the JVM hangs, the servers create large issues (extreme application slowness and terminated user sessions) as the entire duplicate JVM get's all of its 5 GB of process size written to disk swap. We have noted the following hung thread correlated with a hung JVM process until the process is manually killed: "[STUCK] ExecuteThread: '17' for queue: 'weblogic.kernel.Default (self-tuning)'" id=3463 idx=0x158 tid=3460 prio=1 alive, in native, daemon at jrockit/io/FileNativeIO.readBytesPinned(Ljava/io/FileDescriptor;[BII)I(Native Method) at jrockit/io/FileNativeIO.readBytes(FileNativeIO.java:30) at java/io/FileInputStream.readBytes([BII)I(FileInputStream.java) at java/io/FileInputStream.read(FileInputStream.java:194) at java/lang/UNIXProcess$DeferredCloseInputStream.read(UNIXProcess.java:227) at java/io/BufferedInputStream.fill(BufferedInputStream.java:218) at java/io/BufferedInputStream.read(BufferedInputStream.java:235) ^-- Holding lock: java/io/BufferedInputStream@0xfffffffec6510470[thin lock] at gov/v3/common/formgeneration/sessionbean/FormsBean.getProcessStatus(FormsBean.java:809) at gov/v3/common/formgeneration/sessionbean/FormsBean.createPDF(FormsBean.java:750) at gov/v3/common/formgeneration/sessionbean/FormsBean.getTemplateDetails(FormsBean.java:450) at gov/v3/common/formgeneration/sessionbean/FormsBean.generateSinglePDF(FormsBean.java:1371) at gov/v3/common/formgeneration/sessionbean/FormsBean.generatePDF(FormsBean.java:263) at gov/v3/common/formgeneration/sessionbean/FormsBean.endorseDocument(FormsBean.java:2377) at gov/v3/common/formgeneration/sessionbean/Forms_qaco28_EOImpl.endorseDocument(Forms_qaco28_EOImpl.java:214) at gov/v3/delegates/common/FormsAndNoticesDelegate.endorseDocument(FormsAndNoticesDelegate.java:128) at gov/v3/actions/common/EndorseDocumentAction.executeRequest(EndorseDocumentAction.java:68) at gov/v3/fwk/controller/struts/action/V3CommonDispatchAction.dispatchToExecuteMethod(V3CommonDispatchAction.java:532) at gov/v3/fwk/controller/struts/action/V3CommonDispatchAction.executeBaseAction(V3CommonDispatchAction.java:336) at gov/v3/fwk/controller/struts/action/V3BaseDispatchAction.execute(V3BaseDispatchAction.java:69) at org/apache/struts/action/RequestProcessor.processActionPerform(RequestProcessor.java:484) at gov/v3/fwk/controller/struts/requestprocessor/V3TilesRequestProcessor.processActionPerform(V3TilesRequestProcessor.java:384) at org/apache/struts/action/RequestProcessor.process(RequestProcessor.java:274) at org/apache/struts/action/ActionServlet.process(ActionServlet.java:1482) at org/apache/struts/action/ActionServlet.doGet(ActionServlet.java:507) at gov/v3/fwk/controller/struts/servlet/V3ControllerServlet.doGet(V3ControllerServlet.java:110) at javax/servlet/http/HttpServlet.service(HttpServlet.java:743) at javax/servlet/http/HttpServlet.service(HttpServlet.java:856) at weblogic/servlet/internal/StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic/servlet/internal/StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic/servlet/internal/ServletStubImpl.execute(ServletStubImpl.java:283) at weblogic/servlet/internal/ServletStubImpl.execute(ServletStubImpl.java:175) at weblogic/servlet/internal/WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3231) at weblogic/security/acl/internal/AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic/security/service/SecurityManager.runAs(SecurityManager.java:121) at weblogic/servlet/internal/WebAppServletContext.securedExecute(WebAppServletContext.java:2002) at weblogic/servlet/internal/WebAppServletContext.execute(WebAppServletContext.java:1908) at weblogic/servlet/internal/ServletRequestImpl.run(ServletRequestImpl.java:1362) at weblogic/work/ExecuteThread.execute(ExecuteThread.java:209) at weblogic/work/ExecuteThread.run(ExecuteThread.java:181) at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method) -- end of trace We would like to do a couple of things: 1.) Prevent the spawning of a duplicate JVM, as we do not need any of it's functions when executing the simple jfmerge executable, and it creates massive overhead. 2.) In the short term at least prevent this duplicate JVM from handing indefinitely.

    Read the article

  • Need help converting Ruby code to php code

    - by newprog
    Yesterday I posted this queston. Today I found the code which I need but written in Ruby. Some parts of code I have understood (I don't know Ruby) but there is one part that I can't. I think people who know ruby and php can help me understand this code. def do_create(image) # Clear any old info in case of a re-submit FIELDS_TO_CLEAR.each { |field| image.send(field+'=', nil) } image.save # Compose request vm_params = Hash.new # Submitting a file in ruby requires opening it and then reading the contents into the post body file = File.open(image.filename_in, "rb") # Populate the parameters and compute the signature # Normally you would do this in a subroutine - for maximum clarity all # parameters are explicitly spelled out here. vm_params["image"] = file # Contents will be read by the multipart object created below vm_params["image_checksum"] = image.image_checksum vm_params["start_job"] = 'vectorize' vm_params["image_type"] = image.image_type if image.image_type != 'none' vm_params["image_complexity"] = image.image_complexity if image.image_complexity != 'none' vm_params["image_num_colors"] = image.image_num_colors if image.image_num_colors != '' vm_params["image_colors"] = image.image_colors if image.image_colors != '' vm_params["expire_at"] = image.expire_at if image.expire_at != '' vm_params["licensee_id"] = DEVELOPER_ID #in php it's like this $vm_params["sequence_number"] = -rand(100000000);????? vm_params["sequence_number"] = Kernel.rand(1000000000) # Use a negative value to force an error when calling the test server vm_params["timestamp"] = Time.new.utc.httpdate string_to_sign = CREATE_URL + # Start out with the URL being called... #vm_params["image"].to_s + # ... don't include the file per se - use the checksum instead vm_params["image_checksum"].to_s + # ... then include all regular parameters vm_params["start_job"].to_s + vm_params["image_type"].to_s + vm_params["image_complexity"].to_s + # (nil.to_s => '', so this is fine for vm_params we don't use) vm_params["image_num_colors"].to_s + vm_params["image_colors"].to_s + vm_params["expire_at"].to_s + vm_params["licensee_id"].to_s + # ... then do all the security parameters vm_params["sequence_number"].to_s + vm_params["timestamp"].to_s vm_params["signature"] = sign(string_to_sign) #no problem # Workaround class for handling multipart posts mp = Multipart::MultipartPost.new query, headers = mp.prepare_query(vm_params) # Handles the file parameter in a special way (see /lib/multipart.rb) file.close # mp has read the contents, we can close the file now response = post_form(URI.parse(CREATE_URL), query, headers) logger.info(response.body) response_hash = ActiveSupport::JSON.decode(response.body) # Decode the JSON response string ##I have understood below def sign(string_to_sign) #logger.info("String to sign: '#{string_to_sign}'") Base64.encode64(HMAC::SHA1.digest(DEVELOPER_KEY, string_to_sign)) end # Within Multipart modul I have this: class MultipartPost BOUNDARY = 'tarsiers-rule0000' HEADER = {"Content-type" => "multipart/form-data, boundary=" + BOUNDARY + " "} def prepare_query (params) fp = [] params.each {|k,v| if v.respond_to?(:read) fp.push(FileParam.new(k, v.path, v.read)) else fp.push(Param.new(k,v)) end } query = fp.collect {|p| "--" + BOUNDARY + "\r\n" + p.to_multipart }.join("") + "--" + BOUNDARY + "--" return query, HEADER end end end Thanks for your help.

    Read the article

  • Implementing coroutines in Java

    - by JUST MY correct OPINION
    This question is related to my question on existing coroutine implementations in Java. If, as I suspect, it turns out that there is no full implementation of coroutines currently available in Java, what would be required to implement them? As I said in that question, I know about the following: You can implement "coroutines" as threads/thread pools behind the scenes. You can do tricksy things with JVM bytecode behind the scenes to make coroutines possible. The so-called "Da Vinci Machine" JVM implementation has primitives that make coroutines doable without bytecode manipulation. There are various JNI-based approaches to coroutines also possible. I'll address each one's deficiencies in turn. Thread-based coroutines This "solution" is pathological. The whole point of coroutines is to avoid the overhead of threading, locking, kernel scheduling, etc. Coroutines are supposed to be light and fast and to execute only in user space. Implementing them in terms of full-tilt threads with tight restrictions gets rid of all the advantages. JVM bytecode manipulation This solution is more practical, albeit a bit difficult to pull off. This is roughly the same as jumping down into assembly language for coroutine libraries in C (which is how many of them work) with the advantage that you have only one architecture to worry about and get right. It also ties you down to only running your code on fully-compliant JVM stacks (which means, for example, no Android) unless you can find a way to do the same thing on the non-compliant stack. If you do find a way to do this, however, you have now doubled your system complexity and testing needs. The Da Vinci Machine The Da Vinci Machine is cool for experimentation, but since it is not a standard JVM its features aren't going to be available everywhere. Indeed I suspect most production environments would specifically forbid the use of the Da Vinci Machine. Thus I could use this to make cool experiments but not for any code I expect to release to the real world. This also has the added problem similar to the JVM bytecode manipulation solution above: won't work on alternative stacks (like Android's). JNI implementation This solution renders the point of doing this in Java at all moot. Each combination of CPU and operating system requires independent testing and each is a point of potentially frustrating subtle failure. Alternatively, of course, I could tie myself down to one platform entirely but this, too, makes the point of doing things in Java entirely moot. So... Is there any way to implement coroutines in Java without using one of these four techniques? Or will I be forced to use the one of those four that smells the least (JVM manipulation) instead?

    Read the article

  • Linux configurations that would affect Java memory usage?

    - by wmacura
    Hi, Background: I have a set of java background workers I start as part of my webapp. I develop locally on Ubuntu 10.10 and deploy to an Ubuntu 10.04LTS server (a media temple (ve) instance). They're both running the same JVM: Sun JVM 1.6.0_22-b04. As part of the initialization script each worker is started with explicit Xmx, Xms, and XX:MaxPermGen settings. Yet somehow locally all 10 workers use 250MB, while on the server they use more than 2.7GB. I don't know how to begin to track this down. I thought the Ubuntu (and thus, kernel) version might make a difference, but I tried an old 10.04 VM and it behaves as expected. I've noticed that the machine does not seem to ever use memory for buffer or cache (according to htop), which seems a bit strange, but perhaps normal for a server? (edited) Some info: (server) root@devel:/app/axir/target# uname -a Linux devel 2.6.18-028stab069.5 #1 SMP Tue May 18 17:26:16 MSD 2010 x86_64 GNU/Linux (local) wiktor@beastie:~$ uname -a Linux beastie 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:44 UTC 2011 x86_64 GNU/Linux (edited) Comparing PS output: (ps -eo "ppid,pid,cmd,rss,sz,vsz") PPID PID CMD RSS SZ VSZ (local) 1588 1615 java -cp axir-distribution. 25484 234382 937528 1615 1631 java -cp /home/wiktor/Code/ 83472 163059 652236 1615 1657 java -cp /home/wiktor/Code/ 70624 89135 356540 1615 1658 java -cp /home/wiktor/Code/ 37652 77625 310500 1615 1669 java -cp /home/wiktor/Code/ 38096 77733 310932 1615 1675 java -cp /home/wiktor/Code/ 37420 61395 245580 1615 1684 java -cp /home/wiktor/Code/ 38000 77736 310944 1615 1703 java -cp /home/wiktor/Code/ 39180 78060 312240 1615 1712 java -cp /home/wiktor/Code/ 38488 93882 375528 1615 1719 java -cp /home/wiktor/Code/ 38312 77874 311496 1615 1726 java -cp /home/wiktor/Code/ 38656 77958 311832 1615 1727 java -cp /home/wiktor/Code/ 78016 89429 357716 (server) 22522 23560 java -cp axir-distribution. 24860 285196 1140784 23560 23585 java -cp /app/axir/target/a 100764 161629 646516 23560 23667 java -cp /app/axir/target/a 72408 92682 370728 23560 23670 java -cp /app/axir/target/a 39948 97671 390684 23560 23674 java -cp /app/axir/target/a 40140 81586 326344 23560 23739 java -cp /app/axir/target/a 39688 81542 326168 They look very similar. In fact, the question now is why, if I add up the virtual memory usage on the server (3.2GB) does it more closely reflect 2.4GB of memory used (according to free), yet locally the virtual memory used adds up to a much more substantial 4.7GB but only actually uses ~250MB. It seems that perhaps memory isn't being shared as aggressively. (if that's even possible) Thank you for your help, Wiktor

    Read the article

  • Determining if Memory Pointer is Valid - C++

    - by Jim Fell
    It has been my observation that if free( ptr ) is called where ptr is not a valid pointer to system-allocated memory, an access violation occurs. Let's say that I call free like this: LPVOID ptr = (LPVOID)0x12345678; free( ptr ); This will most definitely cause an access violation. Is there a way to test that the memory location pointed to by ptr is valid system-allocated memory? It seems to me that the the memory management part of the Windows OS kernel must know what memory has been allocated and what memory remains for allocation. Otherwise, how could it know if enough memory remains to satisfy a given request? (rhetorical) That said, it seems reasonable to conclude that there must be a function (or set of functions) that would allow a user to determine if a pointer is valid system-allocated memory. Perhaps Microsoft has not made these functions public. If Microsoft has not provided such an API, I can only presume that it was for an intentional and specific reason. Would providing such a hook into the system prose a significant threat to system security? Situation Report Although knowing whether a memory pointer is valid could be useful in many scenarios, this is my particular situation: I am writing a driver for a new piece of hardware that is to replace an existing piece of hardware that connects to the PC via USB. My mandate is to write the new driver such that calls to the existing API for the current driver will continue to work in the PC applications in which it is used. Thus the only required changes to existing applications is to load the appropriate driver DLL(s) at startup. The problem here is that the existing driver uses a callback to send received serial messages to the application; a pointer to allocated memory containing the message is passed from the driver to the application via the callback. It is then the responsibility of the application to call another driver API to free the memory by passing back the same pointer from the application to the driver. In this scenario the second API has no way to determine if the application has actually passed back a pointer to valid memory.

    Read the article

  • CUDA threads for inner loop

    - by Manolete
    I've got this kernel __global__ void kernel1(int keep, int include, int width, int* d_Xco, int* d_Xnum, bool* d_Xvalid, float* d_Xblas) { int i, k; i = threadIdx.x + blockIdx.x * blockDim.x; if(i < keep){ for(k = 0; k < include ; k++){ int val = (d_Xblas[i*include + k] >= 1e5); int aux = d_Xnum[i]; d_Xblas[i*include + k] *= (!val); d_Xco[i*width + aux] = k; d_Xnum[i] +=val; d_Xvalid[i*include + k] = (!val); } } } launched with int keep = 9000; int include = 23000; int width = 0.2*include; int threads = 192; int blocks = keep+threads-1/threads; kernel1 <<< blocks,threads >>>( keep, include, width, d_Xco, d_Xnum, d_Xvalid, d_Xblas ); This kernel1 works fine but it is obviously not totally optimized. I thought it would be straight forward to eliminate the inner loop k but for some reason it doesn't work fine. My first idea was: __global__ void kernel2(int keep, int include, int width, int* d_Xco, int* d_Xnum, bool* d_Xvalid, float* d_Xblas) { int i, k; i = threadIdx.x + blockIdx.x * blockDim.x; k = threadIdx.y + blockIdx.y * blockDim.y; if((i < keep) && (k < include) ) { int val = (d_Xblas[i*include + k] >= 1e5); int aux = d_Xnum[i]; d_Xblas[i*include + k] *= (float)(!val); d_Xco[i*width + aux] = k; atomicAdd(&d_Xnum[i], val); d_Xvalid[i*include + k] = (!val); } } launched with a 2D grid: int keep = 9000; int include = 23000; int width = 0.2*include; int th = 32; dim3 threads(th,th); dim3 blocks (keep+threads.x-1/threads.x, include+threads.y-1/threads.y); kernel2 <<< blocks,threads >>>( keep, include, width, d_Xco, d_Xnum, d_Xvalid, d_Xblas ); Although I believe the idea is fine, it does not work and I am running out of ideas here. Could you please help me out here? I also think the problem could be in d_Xco which stores the position k in a smaller array , so the order matters, but I can't think of any other way of doing it...

    Read the article

  • CUDA memory transfer issue

    - by Vaibhav Sundriyal
    I am trying to execute a code which first transfers data from CPU to GPU memory and vice-versa. In spite of increasing the volume of data, the data transfer time remains the same as if no data transfer is actually taking place. I am posting the code. #include <stdio.h> /* Core input/output operations */ #include <stdlib.h> /* Conversions, random numbers, memory allocation, etc. */ #include <math.h> /* Common mathematical functions */ #include <time.h> /* Converting between various date/time formats */ #include <cuda.h> /* CUDA related stuff */ #include <sys/time.h> __global__ void device_volume(float *x_d,float *y_d) { int index = blockIdx.x * blockDim.x + threadIdx.x; } int main(void) { float *x_h,*y_h,*x_d,*y_d,*z_h,*z_d; long long size=9999999; long long nbytes=size*sizeof(float); timeval t1,t2; double et; x_h=(float*)malloc(nbytes); y_h=(float*)malloc(nbytes); z_h=(float*)malloc(nbytes); cudaMalloc((void **)&x_d,size*sizeof(float)); cudaMalloc((void **)&y_d,size*sizeof(float)); cudaMalloc((void **)&z_d,size*sizeof(float)); gettimeofday(&t1,NULL); cudaMemcpy(x_d, x_h, nbytes, cudaMemcpyHostToDevice); cudaMemcpy(y_d, y_h, nbytes, cudaMemcpyHostToDevice); cudaMemcpy(z_d, z_h, nbytes, cudaMemcpyHostToDevice); gettimeofday(&t2,NULL); et = (t2.tv_sec - t1.tv_sec) * 1000.0; // sec to ms et += (t2.tv_usec - t1.tv_usec) / 1000.0; // us to ms printf("\n %ld\t\t%f\t\t",nbytes,et); et=0.0; //printf("%f %d\n",seconds,CLOCKS_PER_SEC); // launch a kernel with a single thread to greet from the device //device_volume<<<1,1>>>(x_d,y_d); gettimeofday(&t1,NULL); cudaMemcpy(x_h, x_d, nbytes, cudaMemcpyDeviceToHost); cudaMemcpy(y_h, y_d, nbytes, cudaMemcpyDeviceToHost); cudaMemcpy(z_h, z_d, nbytes, cudaMemcpyDeviceToHost); gettimeofday(&t2,NULL); et = (t2.tv_sec - t1.tv_sec) * 1000.0; // sec to ms et += (t2.tv_usec - t1.tv_usec) / 1000.0; // us to ms printf("%f\n",et); cudaFree(x_d); cudaFree(y_d); cudaFree(z_d); return 0; } Can anybody help me with this issue? Thanks

    Read the article

  • How to copy the memeory allocated in device function back to main memory

    - by xhe8
    I have a CUDA program containing a host function and a device function Execute(). In the host function, I allocate a global memory output which will then be passed to the device function and used to store the address of the global memory allocated within the device function. I want to access the in-kernel allocated memory in the host function. The following is the code: #include <stdio.h> typedef struct { int * p; int num; } Structure_A; \__global__ void Execute(Structure_A *output); int main(){ Structure_A *output; cudaMalloc((void***)&output,sizeof(Structure_A)*1); dim3 dimBlockExecute(1,1); dim3 dimGridExecute(1,1); Execute<<<dimGridExecute,dimBlockExecute>>>(output); Structure_A * output_cpu; int * p_cpu; cudaError_t err; output_cpu= (Structure_A*)malloc(1); err=cudaMemcpy(output_cpu,output,sizeof(Structure_A),cudaMemcpyDeviceToHost); if( err != cudaSuccess) { printf("CUDA error a: %s\n", cudaGetErrorString(err)); exit(-1); } p_cpu=(int *)malloc(1); err=cudaMemcpy(p_cpu,output_cpu[0].p,sizeof(int),cudaMemcpyDeviceToHost); if( err != cudaSuccess) { printf("CUDA error b: %s\n", cudaGetErrorString(err)); exit(-1); } printf("output=(%d,%d)\n",output_cpu[0].num,p_cpu[0]); return 0; } \__global__ void Execute(Structure_A *output){ int thid=threadIdx.x; output[thid].p= (int*)malloc(thid+1); output[thid].num=(thid+1); output[thid].p[0]=5; } I can compile the program. But when I run it, I got a error showing that there is a invalid argument in the following memory copy function. "err=cudaMemcpy(p_cpu,output_cpu[0].p,sizeof(int),cudaMemcpyDeviceToHost);" CUDA version is 4.2. CUDA card: Tesla C2075 OS: x86_64 GNU/Linux

    Read the article

  • TFS 2010 SDK: Connecting to TFS 2010 Programmatically&ndash;Part 1

    - by Tarun Arora
    Technorati Tags: Team Foundation Server 2010,TFS 2010 SDK,TFS API,TFS Programming,TFS ALM   Download Working Demo Great! You have reached that point where you would like to extend TFS 2010. The first step is to connect to TFS programmatically. 1. Download TFS 2010 SDK => http://visualstudiogallery.msdn.microsoft.com/25622469-19d8-4959-8e5c-4025d1c9183d?SRC=VSIDE 2. Alternatively you can also download this from the visual studio extension manager 3. Create a new Windows Forms Application project and add reference to TFS Common and client dlls Note - If Microsoft.TeamFoundation.Client and Microsoft.TeamFoundation.Common do not appear on the .NET tab of the References dialog box, use the Browse tab to add the assemblies. You can find them at %ProgramFiles%\Microsoft Visual Studio 10.0\Common7\IDE\ReferenceAssemblies\v2.0. using Microsoft.TeamFoundation.Client; using Microsoft.TeamFoundation.Framework.Client; using Microsoft.TeamFoundation.Framework.Common;   4. There are several ways to connect to TFS, the two classes of interest are, Option 1 – Class – TfsTeamProjectCollectionClass namespace Microsoft.TeamFoundation.Client { public class TfsTeamProjectCollection : TfsConnection { public TfsTeamProjectCollection(RegisteredProjectCollection projectCollection); public TfsTeamProjectCollection(Uri uri); public TfsTeamProjectCollection(RegisteredProjectCollection projectCollection, IdentityDescriptor identityToImpersonate); public TfsTeamProjectCollection(Uri uri, ICredentials credentials); public TfsTeamProjectCollection(Uri uri, ICredentialsProvider credentialsProvider); public TfsTeamProjectCollection(Uri uri, IdentityDescriptor identityToImpersonate); public TfsTeamProjectCollection(RegisteredProjectCollection projectCollection, ICredentials credentials, ICredentialsProvider credentialsProvider); public TfsTeamProjectCollection(Uri uri, ICredentials credentials, ICredentialsProvider credentialsProvider); public TfsTeamProjectCollection(RegisteredProjectCollection projectCollection, ICredentials credentials, ICredentialsProvider credentialsProvider, IdentityDescriptor identityToImpersonate); public TfsTeamProjectCollection(Uri uri, ICredentials credentials, ICredentialsProvider credentialsProvider, IdentityDescriptor identityToImpersonate); public override CatalogNode CatalogNode { get; } public TfsConfigurationServer ConfigurationServer { get; internal set; } public override string Name { get; } public static Uri GetFullyQualifiedUriForName(string name); protected override object GetServiceInstance(Type serviceType, object serviceInstance); protected override object InitializeTeamFoundationObject(string fullName, object instance); } } Option 2 – Class – TfsConfigurationServer namespace Microsoft.TeamFoundation.Client { public class TfsConfigurationServer : TfsConnection { public TfsConfigurationServer(RegisteredConfigurationServer application); public TfsConfigurationServer(Uri uri); public TfsConfigurationServer(RegisteredConfigurationServer application, IdentityDescriptor identityToImpersonate); public TfsConfigurationServer(Uri uri, ICredentials credentials); public TfsConfigurationServer(Uri uri, ICredentialsProvider credentialsProvider); public TfsConfigurationServer(Uri uri, IdentityDescriptor identityToImpersonate); public TfsConfigurationServer(RegisteredConfigurationServer application, ICredentials credentials, ICredentialsProvider credentialsProvider); public TfsConfigurationServer(Uri uri, ICredentials credentials, ICredentialsProvider credentialsProvider); public TfsConfigurationServer(RegisteredConfigurationServer application, ICredentials credentials, ICredentialsProvider credentialsProvider, IdentityDescriptor identityToImpersonate); public TfsConfigurationServer(Uri uri, ICredentials credentials, ICredentialsProvider credentialsProvider, IdentityDescriptor identityToImpersonate); public override CatalogNode CatalogNode { get; } public override string Name { get; } protected override object GetServiceInstance(Type serviceType, object serviceInstance); public TfsTeamProjectCollection GetTeamProjectCollection(Guid collectionId); protected override object InitializeTeamFoundationObject(string fullName, object instance); } }   Note – The TeamFoundationServer class is obsolete. Use the TfsTeamProjectCollection or TfsConfigurationServer classes to talk to a 2010 Team Foundation Server. In order to talk to a 2005 or 2008 Team Foundation Server use the TfsTeamProjectCollection class. 5. Sample code for programmatically connecting to TFS 2010 using the TFS 2010 API How do i know what the URI of my TFS server is, Note – You need to be have Team Project Collection view details permission in order to connect, expect to receive an authorization failure message if you do not have sufficient permissions. Case 1: Connect by Uri string _myUri = @"https://tfs.codeplex.com:443/tfs/tfs30"; TfsConfigurationServer configurationServer = TfsConfigurationServerFactory.GetConfigurationServer(new Uri(_myUri)); Case 2: Connect by Uri, prompt for credentials string _myUri = @"https://tfs.codeplex.com:443/tfs/tfs30"; TfsConfigurationServer configurationServer = TfsConfigurationServerFactory.GetConfigurationServer(new Uri(_myUri), new UICredentialsProvider()); configurationServer.EnsureAuthenticated(); Case 3: Connect by Uri, custom credentials In order to use this method of connectivity you need to implement the interface ICredentailsProvider public class ConnectByImplementingCredentialsProvider : ICredentialsProvider { public ICredentials GetCredentials(Uri uri, ICredentials iCredentials) { return new NetworkCredential("UserName", "Password", "Domain"); } public void NotifyCredentialsAuthenticated(Uri uri) { throw new ApplicationException("Unable to authenticate"); } } And now consume the implementation of the interface, string _myUri = @"https://tfs.codeplex.com:443/tfs/tfs30"; ConnectByImplementingCredentialsProvider connect = new ConnectByImplementingCredentialsProvider(); ICredentials iCred = new NetworkCredential("UserName", "Password", "Domain"); connect.GetCredentials(new Uri(_myUri), iCred); TfsConfigurationServer configurationServer = TfsConfigurationServerFactory.GetConfigurationServer(new Uri(_myUri), connect); configurationServer.EnsureAuthenticated();   6. Programmatically query TFS 2010 using the TFS SDK for all Team Project Collections and retrieve all Team Projects and output the display name and description of each team project. CatalogNode catalogNode = configurationServer.CatalogNode; ReadOnlyCollection<CatalogNode> tpcNodes = catalogNode.QueryChildren( new Guid[] { CatalogResourceTypes.ProjectCollection }, false, CatalogQueryOptions.None); // tpc = Team Project Collection foreach (CatalogNode tpcNode in tpcNodes) { Guid tpcId = new Guid(tpcNode.Resource.Properties["InstanceId"]); TfsTeamProjectCollection tpc = configurationServer.GetTeamProjectCollection(tpcId); // Get catalog of tp = 'Team Projects' for the tpc = 'Team Project Collection' var tpNodes = tpcNode.QueryChildren( new Guid[] { CatalogResourceTypes.TeamProject }, false, CatalogQueryOptions.None); foreach (var p in tpNodes) { Debug.Write(Environment.NewLine + " Team Project : " + p.Resource.DisplayName + " - " + p.Resource.Description + Environment.NewLine); } }   Output   You can download a working demo that uses TFS SDK 2010 to programmatically connect to TFS 2010. Screen Shots of the attached demo application, Share this post :

    Read the article

< Previous Page | 638 639 640 641 642 643 644 645 646 647 648 649  | Next Page >