Search Results

Search found 29225 results on 1169 pages for 'microsoft powerpoint 2010'.

Page 642/1169 | < Previous Page | 638 639 640 641 642 643 644 645 646 647 648 649  | Next Page >

• Customize the Default Screensavers in Windows 7 and Vista

  - by Matthew Guay

  Windows 7 and Vista include a nice set of backgrounds, but unfortunately most of them aren’t configurable by default.  Thanks to a free app and some registry changes, however, you can make the default screensavers uniquely yours! Customize the default screensavers If you’ve ever pressed the Customize button on most of the default screensavers in Windows 7 and Vista, you were probably greeted with this message: A little digging in the registry shows that this isn’t fully correct.  The default screensavers in Vista and 7 do have options you can set, but they’re not obvious.  With the help of an app or some registry tips, you can easily customize the screensavers to be uniquely yours.  Here’s how you can do it with an app or in the registry. Customize Windows Screensavers with System Screensavers Tweaker Download the System Screensavers Tweaker (link below), and unzip the folder.  Run nt6srccfg.exe in the folder to tweak your screensavers.  This application lets you tweak the screensavers’ registry settings graphically, and it works great in all editions of Windows Vista and 7, including x64 versions. Change any of the settings you want in the screensaver tweaker, and click Apply. To preview the changes to your screensaver, open the Screen Saver settings window as normal by right-clicking on the desktop, and selecting Personalize. Click on the Screensaver button on the bottom right. Now, select your modified screensaver, and click Preview to see your changes. You can change a wide variety of settings for the Bubbles, Ribbons, and Mystify screensavers in Windows 7 and Vista, as well as the Aurora screensaver in Windows Vista.  The tweaks to the Bubbles screensaver are especially nice.  Here’s how the Bubbles look without transparency. And, by tweaking a little more, you get a screensaver that looks more like a screen full of marbles. Ribbons and Mystify each have less settings, but still can produce some unique effects.   How’s that for a brilliant screensaver? And, if you want to return your screensavers to their default settings, simply run the System Screensavers Tweaker and select Reset to defaults on any screensaver you wish to reset. Customize Windows Screensavers in the Registry If you prefer to roll up your sleeves and tweak Windows under-the-hood, then here’s how you can customize the screensavers yourself in the Registry.  Type regedit into the search box in the Start menu, browse to the key for each screensaver, and add or modify the DWORD values listed for that screensaver using the Decimal base. Please Note: Tweaking the Registry can be difficult, so if you’re unsure, just use the tweaking application above. Also, you’ll probably want to create a System Restore Point.   Bubbles To edit the Bubbles screensaver, browse to the following in regedit: HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Screensavers\Bubbles Now, add or modify the following DWORD values to tweak the screensaver: MaterialGlass – enter 0 for solid or 1 for transparent bubbles Radius – enter a number between 1090000000 and 1130000000; the larger the number, the larger the bubbles’ radius ShowBubbles – enter 0 to show a black background or 1 to show the current desktop behind the bubbles ShowShadows – enter 0 for no shadow or 1 for shadows behind the bubbles SphereDensity – enter a number from 1000000000 to 2100000000; the higher the number, the more bubbles on the screen. TurbulenceNumOctaves – enter a number from 1 to 255; the higher the number, the faster the bubble colors will change. Ribbons To edit the Ribbons screensaver, browse to the following in regedit: HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Screensavers\Ribbons Now, add or modify the following DWORD values to tweak the screensaver: Blur – enter 0 to prevent ribbons from fading, or 1 to have them fade away after a few moments. Numribbons – enter a number from 1 to 100; the higher the number, the more ribbons on the screen. RibbonWidth – enter a number from 1000000000 to 1080000000; the higher the number, the thicker the ribbons. Mystify To edit the Mystify screensaver, browse to the following in regedit: HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Screensavers\Mystify Now, add or modify the following DWORD values to tweak the screensaver: Blur – enter 0 to prevent lines from fading, or 1 to have them fade away after a few moments. LineWidth – enter a number from 1000000000 to 1080000000; the higher the number, the wider the lines. NumLines – enter a number from 1 to 100; the higher the value, the more lines on the screen. Aurora – Windows Vista only To edit the Aurora screensaver in Windows Vista, browse to the following in regedit: HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Screensavers\Aurora Now, add or modify the following DWORD values to tweak the screensaver: Amplitude – enter a value from 500000000 to 2000000000; the higher the value, the slower the motion. Brightness – enter a value from 1000000000 to 1050000000; the higher the value, the brighter the affect. NumLayers – enter a value from 1 to 15; the higher the value, the more aurora layers displayed. Speed – enter a value from 1000000000 to 2100000000; the higher the value, the faster the cycling. Conclusion Although the default screensavers are nice, they can be boring after awhile with their default settings.  But with these tweaks, you can create a variety of vibrant screensavers that should keep your desktop fresh and interesting. Link Download the System Screensavers Tweaker Similar Articles Productive Geek Tips Create Icons to Start the Screensaver on Windows 7 or VistaMake Your Windows XP Logon Screen Look Like Windows VistaSpeed up Windows Vista Start Menu Search By Limiting ResultsRoundup: 16 Tweaks to Windows Vista Look & FeelSet XP as the Default OS in a Windows Vista Dual-Boot Setup TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 NachoFoto Searches Images in Real-time Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi LocPDF is a Visual PDF Search Tool Download Free iPad Wallpapers at iPad Decor

  Read the article

• Customize the Five Windows Folder Templates

  - by Mark Virtue

  Are you’re particular about the way Windows Explorer presents each folder’s contents? Here we show you how to take advantage of Explorer’s built-in templates, which cuts down the time it takes to do customizations. Note: The techniques in this article apply to Windows XP, Vista, and Windows 7. When opening a folder for the first time in Windows Explorer, we are presented with a standard default view of the files and folders in that folder. It may be that the items are presented are perfectly fine, but on the other hand, we may want to customize the view.  The aspects of it that we can customize are the following: The display type (list view, details, tiles, thumbnails, etc) Which columns are displayed, and in which order The widths of the visible columns The order in which the files and folders are sorted Any file groupings Thankfully, Windows offers us a shortcut.  A particular folder’s settings can be used as a “template” for other, similar folders.  In fact, we can store up to five separate sets of folder presentation configurations.  Once we save the settings for a particular template, that template can then be applied to other folders. Customize Your First Folder We’ll start by setting up the first of our templates – the default one.  Once we create this template and apply it, the vast majority of the folders in our file system will change to match it, so it’s important that we set it up very carefully.  The first step in creating and applying the template is to customize one folder with the settings that all the rest will have. Choose a folder that is typical of the folders that you wish to have this default template.  Select it in Windows Explorer.  To ensure that it is a suitable candidate, right-click the folder name and select Properties, then go to the Customize tab.  Ensure that this folder is marked as General Items.  If it is not, either choose a different folder or select General Items from the list. Click OK.  Now we’re ready to customize our first folder. Changing the way one single folder is presented is straightforward.  We start with the folder’s display type.  Click the Change your view button in the top-right corner of every Explorer window. Each time you click the button, the folder’s view cycles to the next view type.  Alternatively you can click the little down-arrow next to the button to see all the display types at once, and select the one you want. Click the view you want, or drag the slider next to the one you want. If you have chosen Details, then the next thing you may wish to change is which columns are displayed, and the order of these.  To choose which columns are displayed, simply right-click on any column heading.  A list of the columns currently being display appears. Simply uncheck a column if you don’t want it displayed, and check the columns that you want displayed.  If you want some information displayed about your files that is not listed here, then click the More… button for a full list of file attributes. There’s a lot of them! To change the order of the columns that are currently being displayed, simply click on a column heading and drag it to where you think it should be.  To change the width of a column, click the line that represents the right-hand edge of the column and drag it left or right. To sort by a column, click once on that column.  To reverse the sort-order, click that same column again. To change the groupings of the files in the folder, right-click in a blank area of the folder, select Group by, and select the appropriate column. Apply This Default Template to All Similar Folders Once you have the folder exactly the way you want it, we now use this folder as our default template for most of the folders in our file system.  To do this, ensure that you are still in the folder you just customized, and then, from the Organize menu in Explorer, click on Folder and search options. Then select the View tab and click the Apply to Folders button. After you’ve clicked OK, visit some of the other folders in your file system.  You should see that most have taken on these new settings. What we’ve just done, in effect, is we have customized the General Items template.  This is one of five templates that Windows Explorer uses to display folder contents.  The five templates are called (in Windows 7): General Items Documents Pictures Music Videos When a folder is opened, Windows Explorer examines the contents to see if it can automatically determine which folder template to use to display the folder contents.  If it is not obvious that the folder contents falls into any of the last four templates, then Windows Explorer chooses the General Items template.  That’s why most of the folders in your file system are shown using the General Items template. Changing the Other Four Templates If you want to adjust the other four templates, the process is very similar to what we’ve just done.  If you wanted to change the “Music” template, for example, the steps would be as follows: Select a folder that contains music items Apply the existing Music template to the folder (even if it doesn’t look like you want it to) Customize the folder to your personal preferences Apply the new template to all “Music” folders A fifth step would be:  When you open a folder that contains music items but is not automatically displayed using the Music template, you manually select the Music template for that folder. First, select a folder that contains music items.  It will probably be displayed using the existing Music template: Next, ensure that it is using the Music template.  If it’s not, then manually select the Music template. Next, customize the folder to suit your personal preferences (here we’ve added a couple of columns, and sorted by Artist). Now we can set this view to be our Music template.  Choose Organize, then the View tab, and click the Apply to Folders button. Note: The only folders that will inherit these settings are the ones that are currently (or will soon be) using the Music template. Now, if you have any folder that contains music items, and you want it to inherit all of these settings, then right-click the folder name, choose Properties, and select that this folder should use the Music template.  You can also cehck the box entitled Also apply this template to all subfolders if you want to save yourself even more time with all the sub-folders. Conclusion It’s neat to be able to set up templates for your folder views like this.  It’s a shame that Microsoft didn’t take the concept just a little further and allow you to create as many templates as you want. Similar Articles Productive Geek Tips Fix For When Windows Explorer in Vista Stops Showing File NamesCustomize the Windows 7 or Vista Send To MenuFix for New Contact Group Button Not Displaying in VistaWhy Did Windows Vista’s Music Folder Icon Turn Yellow?Make Your Last Minute Holiday Cards with Microsoft Word TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7

  Read the article

• Now Available &ndash; Windows Azure SDK 1.6

  - by Shaun

  Microsoft has just announced the Windows Azure SDK 1.6 and the Windows Azure Tools for Visual Studio 1.6. Now people can download the latest product through the WebPI. After you downloaded and installed the SDK you will find that The SDK 1.6 can be stayed side by side with the SDK 1.5, which means you can still using the 1.5 assemblies. But the Visual Studio Tools would be upgraded to 1.6. Different from the previous SDK, in this version it includes 4 components: Windows Azure Authoring Tools, Windows Azure Emulators, Windows Azure Libraries for .NET 1.6 and the Windows Azure Tools for Microsoft Visual Studio 2010. There are some significant upgrades in this version, which are Publishing Enhancement: More easily connect to the Windows Azure when publish your application by retrieving a publish setting file. It will let you configure some settings of the deployment, without getting back to the developer portal. Multi-profiles: The publish settings, cloud configuration files, etc. will be stored in one or more MSBuild files. It will be much easier to switch the settings between vary build environments. MSBuild Command-line Build Support. In-Place Upgrade Support.   Publishing Enhancement So let’s have a look about the new features of the publishing. Just create a new Windows Azure project in Visual Studio 2010 with a MVC 3 Web Role, and right-click the Windows Azure project node in the solution explorer, then select Publish, we will find the new publish dialog. In this version the first thing we need to do is to connect to our Windows Azure subscription. Click the “Sign in to download credentials” link, we will be navigated to the login page to provide the Live ID. The Windows Azure Tool will generate a certificate file and uploaded to the subscriptions those belong to us. Then we will download a PUBLISHSETTINGS file, which contains the credentials and subscriptions information. The Visual Studio Tool will generate a certificate and deployed to the subscriptions you have as the Management Certificate. The VS Tool will use this certificate to connect to the subscription in the next step. In the next step, I would back to the Visual Studio (the publish dialog should be stilling opened) and click the Import button, select the PUBLISHSETTINGS file I had just downloaded. Then all my subscriptions will be shown in the dropdown list. Select a subscription that I want the application to be published and press the Next button, then we can select the hosted service, environment, build configuration and service configuration shown in the dialog. In this version we can create a new hosted service directly here rather than go back to the developer portal. Just select the <Create New …> item in the hosted service. What we need to do is to provide the hosted service name and the location. Once clicked the OK, after several seconds the hosted service will be established. If we went to the developer portal we will find the new hosted service in my subscription. a) Currently we cannot select the Affinity Group when create a new hosted service through the Visual Studio Publish dialog. b) Although we can specify the hosted service name and DNS prefixing through the developer portal, we cannot do so from the VS Tool, which means the DNS prefixing would be the same as what we specified for the hosted service name. For example, we specified our hosted service name as “Sdk16Demo”, so the public URL would be http://sdk16demo.cloudapp.net/. After created a new hosted service we can select the cloud environment (production or staging), the build configuration (release or debug), and the service configuration (cloud or local). And we can set the Remote Desktop by check the related checkbox as well. One thing should be note is that, in this version when we set the Remote Desktop settings we don’t need to specify a certificate by default. This is because the Visual Studio will generate a new certificate for us by default. But we can still specify an existing certificate for RDC, by clicking the “More Options” button. Visual Studio Tool will create another certificate for the Remote Desktop connection. It will NOT use the certificate that managing the subscription. We also can select the “Advanced Settings” page to specify the deployment label, storage account, IntelliTrace and .NET profiling information, etc.. Press Next button, the dialog will display all settings I had just specified and it will save them as a new profile. The last step is to click the Publish button. Since we enabled the Remote Desktop feature, the first step of publishing was uploading the certificate. And then it will verify the storage account we specified and upload the package, then finally created the website in Windows Azure.   Multi-Profiles After published, if we back to the Visual Studio we can find a AZUREPUBXML file under the Profiles folder in the Azure project. It includes all settings we specified before. If we publish this project again, we can just use the current settings (hosted service, environment, RDC, etc.) from this profile without input them again. And this is very useful when we have more than one deployment settings. For example it would be able to have one AZUREPUBXML profile for deploying to testing environment (debug building, less roles with RDC and IntelliTrace) and one for production (release building, more roles but without IntelliTrace).   In-Place Upgrade Support Let’s change some codes in the MVC pages and click the Publish menu from the azure project node. No need to specify any settings,  here we can use the pervious settings by loading the azure profile file (AZUREPUBXML). After clicked the Publish button the VS Tool brought a dialog to us to indicate that there’s a deployment available in the hosted service environment, and prompt to REPLACE it or not. Notice that in this version, the dialog tool said “replace” rather than “delete”, which means by default the VS Tool will use In-Place Upgrade when we deploy to a hosted service that has a deployment already exist. After click Yes the VS Tool will upload the package and perform the In-Place Upgrade. If we back to the developer portal we can find that the status of the hosted service was turned to “Updating…”. But in the previous SDK, it will try to delete the whole deployment and publish a new one.   Summary When the Microsoft announced the features that allows the changing VM size via In-Place Upgrade, they also mentioned that in the next few versions the user experience of publishing the azure application would be improved. The target was trying to accomplish the whole publish experience in Visual Studio, which means no need to touch developer portal any more. In the SDK 1.6 we can see from the new publish dialog, as a developer we can do the whole process, includes creating hosted service, specifying the environment, configuration, remote desktop, etc. values without going back the the developer portal.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• Blogging tips for SQL Server professionals

  - by jamiet

  For some time now I have been intending to put some material together relating my blogging experiences since I began blogging in 2004 and that led to me submitting a session for SQLBits recently where I intended to do just that. That didn’t get enough votes to allow me to present however so instead I resolved to write a blog post about it and Simon Sabin’s recent post Blogging – how do you do it? has prompted me to get around to completing it. So, here I present a compendium of tips that I’ve picked up from authoring a fair few blog posts over the past 6 years. Feedburner Feedburner.com is a service that can consume your blog’s default RSS feed and provide another, replacement, feed that has exactly the same content. You can then supply that replacement feed on your blog site for other people to consume in their RSS readers. Why would you want to do this? Well, two reasons actually: It makes your blog portable. If you ever want to move your blog to a different URL you don’t have to tell your subscribers to move to a different feed. The feedburner feed is a pointer to your blog content rather than being a copy of it. Feedburner will collect stats telling you how many people are subscribed to your feed, which RSS readers they use, stuff like that. Here’s a sample screenshot for http://sqlblog.com/blogs/jamie_thomson/: It also tells you what your most viewed posts are: Web stats like these are notoriously inaccurate but then again the method of measurement here is not important, what IS important is that it gives you a trustworthy ranking of your blog posts and (in my opinion) knowing which are your most popular posts is more important than knowing exactly how many views each post has had. This is just the tip of the iceberg of what Feedburner provides and I recommend every new blogger to try it! Monitor subscribers using Google Reader If for some reason Feedburner is not to your taste or (more likely) you already have an established RSS feed that you do not want to change then Google provide another way in which you can monitor your readership in the shape of their online RSS reader, Google Reader. It provides, for every RSS feed, a collection of stats including the number of Google Reader users that have subscribed to that RSS feed. This is really valuable information and in fact I have been recording this statistic for mine and a number of other blogs for a few years now and as such I can produce the following chart that indicates how readership is trending for those blogs over time: [Good news for my fellow SQLBlog bloggers.] As Stephen Few readily points out, its not the numbers that are important but the trend. Search Engine Optimisation (SEO) SEO (or “How do I get my blog to show up in Google”) is a massive area of expertise which I don’t want (and am unable) to cover in much detail here but there are some simple rules of thumb that will help: Tags – If your blog engine offers the ability to add tags to your blog post, use them. Invariably those tags go into the meta section of the page HTML and search engines lap that stuff up. For example, from my recent post Microsoft publish Visual Studio 2010 Database Project Guidance: Title – Search engines take notice of web page titles as well so make them specific and descriptive (e.g. “Configuring dtsConfig connection strings”) rather than esoteric and meaningless in a vain attempt to be humorous (e.g. “Last night a DJ saved my ETL batch”)! Title(2) – Make your title even more search engine friendly by mentioning high level subject areas, not dissimilar to Twitter hashtags. For example, if you look at all of my posts related to SSIS you will notice that nearly all contain the word “SSIS” in the title even if I had to shoehorn it in there by putting it in square brackets or similar. Another tip, if you ARE putting words into your titles in this artificial manner then put them at the end so that they’re not that prominent in search engine results; they’re there for the search engines to consume, not for human beings. Images – Always add titles and alternate text (ALT attribute) to images in your blog post. If you use Windows 7 or Windows Vista then you can use Live Writer (which Simon recommended) makes this easy for you. Headings – If you want to highlight section headings use heading tags (e.g. <H1>, <H2>, <H3> etc…) rather than just formatting the text appropriately – again, Live makes this easy. These tags give your blog posts structure that is understood by search engines and RSS readers alike. (I believe it makes them more amenable to CSS as well – though that’s not something I know too much about). If you check the HTML source for the blog post you’re reading right now you’ll be able to scan through and see where I have used heading tags. Microsoft provide a free tool called the SEO Toolkit that will analyse your blog site (for free) and tell you what things you should change to improve SEO. Go read more and download for free at Search Engine Optimization Toolkit. Did I mention that it was free? Miscellaneous Tips If you are including code in your blog post then ensure it is formatted correctly. Use SQL Server Central’s T-SQL prettifier for formatting T-SQL code. Use images and videos. Personally speaking there’s nothing I like less when reading a blog than paragraph after paragraph of text. Images make your blog more appealing which means people are more likely to read what you have written. Be original. Don’t plagiarise other people’s content and don’t simply rewrite the contents of Books Online. Every time you publish a blog post tweet a link to it. Include hashtags in your tweet that are more likely to grab people’s attention. That’s probably enough for now - I hope this blog post proves useful to someone out there. If you would appreciate a related session at a forthcoming SQLBits conference then please let me know. This will likely be my last blog post for 2010 so I would like to take this opportunity to thank everyone that has commented on, linked to or read any of my blog posts in that time. 2011 is shaping up to be a very interesting for SQL Server observers with the impending release of SQL Server code-named Denali and I promise I’ll have lots more content on that as the year progresses. Happy New Year. @Jamiet

  Read the article

• Getting Rails Application Running Under IronRuby Rack

  - by NotMyself

  Anyone else playing with ironruby? I have successfully got the IronRuby.Rails.Example project running on my local machine under IIS 5.1. I am now attempting to get my own demo rails site running in the same way. My web.config is slightly different from the example project. I am attempting to only use what was distributed with IronRuby 1.0 and what I have installed using gems. I am getting the following error which doesn't give me a lot to go on: D:/demo/config/boot.rb:66:in `exit': exit (SystemExit) After trying many different things, I think it is having a problem finding gems. I have attached my web config and ironrack.log. Does anyone have pointers on what I am doing wrong? Thanks! <?xml version="1.0"?> <configuration> <configSections> <!-- custom configuration section for DLR hosting --> <section name="microsoft.scripting" type="Microsoft.Scripting.Hosting.Configuration.Section, Microsoft.Scripting" requirePermission="false"/> </configSections> <system.webServer> <handlers> <!-- clear all other handlers first. Don't do this if you have other handlers you want to run --> <clear/> <!-- This hooks up the HttpHandler which will dispatch all requests to Rack --> <add name="IronRuby" path="*" verb="*" type="IronRuby.Rack.HttpHandlerFactory, IronRuby.Rack" resourceType="Unspecified" requireAccess="Read" preCondition="integratedMode"/> </handlers> </system.webServer> <system.web> <!-- make this true if you want to debug any of the DLR code, IronRuby.Rack, or your own managed code --> <compilation debug="true"/> <httpHandlers> <!-- clear all other handlers first. Don't do this if you have other handlers you want to run --> <clear/> <!-- This hooks up the HttpHandler which will dispatch all requests to Rack --> <add path="*" verb="*" type="IronRuby.Rack.HttpHandlerFactory, IronRuby.Rack" /> </httpHandlers> </system.web> <!-- DLR configuration. Set debugMode to "true" if you want to debug your dynamic language code with VS --> <microsoft.scripting debugMode="false"> <options> <!-- Library paths: make sure these paths are correct --> <!--<set option="LibraryPaths" value="..\..\..\Languages\Ruby\libs\; ..\..\..\..\External.LCA_RESTRICTED\Languages\Ruby\ruby-1.8.6p368\lib\ruby\site_ruby\1.8\; ..\..\..\..\External.LCA_RESTRICTED\Languages\Ruby\ruby-1.8.6p368\lib\ruby\1.8\"/>--> <set option="LibraryPaths" value="C:\IronRuby\lib\IronRuby;C:\IronRuby\lib\ruby\1.8;C:\IronRuby\lib\ruby\site_ruby;C:\IronRuby\lib\ruby\site_ruby\1.8"/> </options> </microsoft.scripting> <appSettings> <add key="AppRoot" value="."/> <add key="Log" value="ironrack.log"/> <!-- <add key="GemPath" value="..\..\..\..\External.LCA_RESTRICTED\Languages\Ruby\ruby-1.8.6p368\lib\ruby\gems\1.8"/> --> <add key="GemPath" value="C:\IronRuby\Lib\ironruby\gems\1.8\gems"/> <add key="RackEnv" value="production"/> </appSettings> </configuration> === Booting ironruby-rack at 4/15/2010 1:27:12 PM [DEBUG] >>> TOPLEVEL_BINDING = binding => Setting GEM_PATH: 'C:\\IronRuby\\Lib\\ironruby\\gems\\1.8\\gems' => Setting RACK_ENV: 'production' => Loading RubyGems [DEBUG] >>> require 'rubygems' => Loading Rack >=1.0.0 [DEBUG] >>> gem 'rack', '>=1.0.0';require 'rack' => Loaded rack-1.1 => Application root: 'D:\\demo' => Loading Rack application [DEBUG] >>> Rack::Builder.new { ( require "config/environment" ENV['RAILS_ENV'] = 'development' use Rails::Rack::LogTailer use Rails::Rack::Static run ActionController::Dispatcher.new ) }.to_app exit D:/demo/config/boot.rb:66:in `exit': exit (SystemExit) from D:/demo/config/boot.rb:66:in `load_rails_gem' from D:/demo/config/boot.rb:54:in `load_initializer' from D:/demo/config/boot.rb:38:in `run' from D:/demo/config/boot.rb:11:in `boot!' from D:/demo/config/boot.rb:110 from C:/IronRuby/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `require' from C:/IronRuby/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `require' from D:/demo/config/environment.rb:7 from C:/IronRuby/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `require' from C:/IronRuby/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `require' from (eval):1 from C:/IronRuby/lib/ironruby/gems/1.8/gems/rack-1.1.0/lib/rack/builder.rb:46:in `instance_eval' from C:/IronRuby/lib/ironruby/gems/1.8/gems/rack-1.1.0/lib/rack/builder.rb:46:in `initialize' from (eval):0 from D:\Dev\ironruby\ironruby-ironruby-20bc41b\Merlin\Main\Hosts\IronRuby.Rack\RubyEngine.cs:52:in `Execute' from D:\Dev\ironruby\ironruby-ironruby-20bc41b\Merlin\Main\Hosts\IronRuby.Rack\RubyEngine.cs:45:in `Execute' from D:\Dev\ironruby\ironruby-ironruby-20bc41b\Merlin\Main\Hosts\IronRuby.Rack\Application.cs:68:in `Rackup' from D:\Dev\ironruby\ironruby-ironruby-20bc41b\Merlin\Main\Hosts\IronRuby.Rack\Application.cs:32:in `.ctor' from D:\Dev\ironruby\ironruby-ironruby-20bc41b\Merlin\Main\Hosts\IronRuby.Rack\HttpHandlerFactory.cs:37:in `GetHandler' from System.Web:0:in `MapHttpHandler' from System.Web:0:in `System.Web.HttpApplication.IExecutionStep.Execute' from System.Web:0:in `ExecuteStep' from System.Web:0:in `ResumeSteps' from System.Web:0:in `System.Web.IHttpAsyncHandler.BeginProcessRequest' from System.Web:0:in `ProcessRequestInternal' from System.Web:0:in `ProcessRequestNoDemand' from System.Web:0:in `ProcessRequest'

  Read the article

• When OneTug Just Isn&rsquo;t Enough&hellip;

  - by onefloridacoder

  I stole that from the back of a T-shirt I saw at the Orlando Code Camp 2010.  This was my first code camp and my first time volunteering for an event like this as well.  It was an awesome day.  I cannot begin to count the “aaahh”, “I did-not-know I could do that”, in the crowds and for myself.  I think it was a great day of learning for everyone at all levels.  All of the presenters were different and provided great insights into the topics they were presenting.  Here’s a list of the ones that I attended. KodeFuGuru, “Pirates vs. Ninjas” He touched on many good topics to relax some of the ways we think when we are writing out code, and still looks good, readable, etc.  As he pointed out in all of his examples, we might not always realize everything that’s going on under the covers.  He exposed a bug in his own code, and verbalized the mental gymnastics he went through when he knew there was something wrong with one of his IEnumerable implementations.  For me, it was great to hear that someone else labors over these gut reactions to code quickly snapped together, to the point that we rush to the refactor stage to fix what’s bothering us – and learn.  He has some content on extension methods that was very interesting.  My “that is so cool” moment was when he swapped out AddEntity method on an entity class and used a With extension method instead.  Some of the LINQ scales fell off my eyes at that moment, and I realized my own code could be a lot more powerful (and readable) if incorporate a few of these examples at the appropriate times.  And he cautioned as well… “don’t go crazy with this stuff”, there’s a place and time for everything.  One of his examples demo’d toward the end of the talk is on his sight where he’s chaining methods together, cool stuff. Quotes I liked: “Extension Methods - Extension methods to put features back on the model type, without impacting the type.” “Favor Declarative Code” – Check out the ? and ?? operators if you’re not already using them. “Favor Fluent Code” “Avoid Pirate Ninja Zombies!  If you see one run!” I’m definitely going to be looking at “Extract Projection” when I get into VS2010. BDD 101 – Sean Chambers http://github.com/schambers This guy had a whole host of gremlins against him, final score Sean 5, Gremlins 1.  He ran the code samples from his github repo  in the code github code viewer since the PC they school gave him to use didn’t have VS installed. He did a great job of converting the grammar between BDD and TDD, and how this style of development can be used in integration tests as well as the different types of gated builds on a CI box – he didn’t go into a discussion around CI, but we could infer that it could work. Like when we use WSSF, it does cause a class explosion to happen however the amount of code per class it limit to just covering the concern at hand – no more, no less.  As in “When I as a <Role>, expect {something} to happen, because {}”  This keeps us (the developer) from gold plating our solutions and creating less waste.  He basically keeps the code that prove out the requirement to two lines of code.  Nice. He uses SpecUnit to merge this grammar into his .NET projects and gave an overview on how this ties into writing his own BDD tests.  Some folks were familiar with Given / When / Then as story acceptance criteria and here’s how he mapped it: “Given <Context>  When <Something Happens> Then <I expect...>”  There are a few base classes and overrides in the SpecUnit framework that help with setting up the context for each test which looked very handy. Successfully Running Your Own Coding Business The speaker ran through a list of items that sounded like common sense stuff LLC, banking, separating expenses, etc.  Then moved into role playing with business owners and an ISV.  That was pretty good stuff, it pays to be a good listener all of the time even if your client is sitting on the other side of the phone tearing you head off for you – but that’s all it is, and get used to it its par for the course.  Oh, yeah always answer the phone was one simple thing that you can do to move  your business forward.  But like Cory Foy tweeted this week, “If you owe me a lot of money, don’t have a message that says your away for five weeks skiing in Colorado.”  Lots of food for thought that’s on my list of “todo’s and to-don’ts”. Speaker Idol Next, I had the pleasure of helping Russ Fustino tape this part of Code Camp as my primary volunteer opportunity that day.  You remember Russ, “know the code” from the awesome Russ’ Tool Shed series.  He did a great job orchestrating and capturing the Speaker Idol finals.   So I didn’t actually miss any sessions, but was able to see three back to back in one setting.  The idol finalists gave a 10 minute talk and very deep subjects, but different styles of talks.  No one walked away empty handed for jobs very well done.  Russ has details on his site.  The pictures and  video captured is supposed to be published on Channel 9 at a later date.  It was also a valuable experience to see what makes technical speakers effective in their talks.  I picked up quite a few speaking tips from what I heard from the judges and contestants. Design For Developers – Diane Leeper If you are a great developer, you’re probably a lousy designer.  Diane didn’t come to poke holes in what we think we can do with UI layout and design, but she provided some tools we can use to figure out metaphors for visualizing data.  If you need help with that check out Silverlight Pivot – that’s what she was getting at.  I was first introduced to her at one of John Papa’s talks last year at a Lakeland User Group meeting and she’s very passionate about design.  She was able to discuss different elements of Pivot, while to a developer is just looked cool. I believe she was providing the deck from her talk to folks after her talk, so send her an email if you’re interested.   She says she can talk about design for hours and hours – we all left that session believing her.   Rinse and Repeat Orlando Code Camp 2010 was awesome, and would totally do it again.  There were lots of folks from my shop there, and some that have left my shop to go elsewhere.  So it was a reunion of sorts and a great celebration for the simple fact that its great to be a developer and there’s a community that supports and recognizes it as well.  The sponsors were generous and the organizers were very tired, namely Esteban Garcia and Will Strohl who were responsible for making a lot of this magic happen.  And if you don’t believe me, check out the chatter on Twitter.

  Read the article

• Exploring the Excel Services REST API

  - by jamiet

  Over the last few years Analysis Services guru Chris Webb and I have been on something of a crusade to enable better access to data that is locked up in countless Excel workbooks that litter the hard drives of enterprise PCs. The most prominent manifestation of that crusade up to now has been a forum thread that Chris began on Microsoft Answers entitled Excel Web App API? Chris began that thread with: I was wondering whether there was an API for the Excel Web App? Specifically, I was wondering if it was possible (or if it will be possible in the future) to expose data in a spreadsheet in the Excel Web App as an OData feed, in the way that it is possible with Excel Services? Up to recently the last 10 words of that paragraph "in the way that it is possible with Excel Services" had completely washed over me however a comment on my recent blog post Thoughts on ExcelMashup.com (and a rant) by Josh Booker in which Josh said: Excel Services is a service application built for sharepoint 2010 which exposes a REST API for excel documents. We're looking forward to pros like you giving it a try now that Office365 makes sharepoint more easily accessible.  Can't wait for your future blog about using REST API to load data from Excel on Offce 365 in SSIS. made me think that perhaps the Excel Services REST API is something I should be looking into and indeed that is what I have been doing over the past few days. And you know what? I'm rather impressed with some of what Excel Services' REST API has to offer. Unfortunately Excel Services' REST API also has one debilitating aspect that renders this blog post much less useful than it otherwise would be; namely that it is not publicly available from the Excel Web App on SkyDrive. Therefore all I can do in this blog post is show you screenshots of what the REST API provides in Sharepoint rather than linking you directly to those REST resources; that's a great shame because one of the benefits of a REST API is that it is easily and ubiquitously demonstrable from a web browser. Instead I am hosting a workbook on Sharepoint in Office 365 because that does include Excel Services' REST API but, again, all I can do is show you screenshots. N.B. If anyone out there knows how to make Office-365-hosted spreadsheets publicly-accessible (i.e. without requiring a username/password) please do let me know (because knowing which forum on which to ask the question is an exercise in futility). In order to demonstrate Excel Services' REST API I needed some decent data and for that I used the World Tourism Organization Statistics Database and Yearbook - United Nations World Tourism Organization dataset hosted on Azure Datamarket (its free, by the way); this dataset "provides comprehensive information on international tourism worldwide and offers a selection of the latest available statistics on international tourist arrivals, tourism receipts and expenditure" and you can explore the data for yourself here. If you want to play along at home by viewing the data as it exists in Excel then it can be viewed here. Let's dive in.   The root of Excel Services' REST API is the model resource which resides at: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model Note that this is true for every workbook hosted in a Sharepoint document library - each Excel workbook is a RESTful resource. (Update: Mark Stacey on Twitter tells me that "It's turned off by default in onpremise Sharepoint (1 tickbox to turn on though)". Thanks Mark!) The data is provided as an ATOM feed but I have Firefox's feed reading ability turned on so you don't see the underlying XML goo. As you can see there are four top level resources, Ranges, Charts, Tables and PivotTables; exploring one of those resources is where things get interesting. Let's take a look at the Tables Resource: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Tables Our workbook contains only one table, called ‘Table1’ (to reiterate, you can explore this table yourself here). Viewing that table via the REST API is pretty easy, we simply append the name of the table onto our previous URI: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Tables('Table1') As you can see, that quite simply gives us a representation of the data in that table. What you cannot see from this screenshot is that this is pure HTML that is being served up; that is all well and good but actually we can do more interesting things. If we specify that the data should be returned not as HTML but as: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Tables('Table1')?$format=image then that data comes back as a pure image and can be used in any web page where you would ordinarily use images. This is the thing that I really like about Excel Services’ REST API – we can embed an image in any web page but instead of being a copy of the data, that image is actually live – if the underlying data in the workbook were to change then hitting refresh will show a new image. Pretty cool, no? The same is true of any Charts or Pivot Tables in your workbook - those can be embedded as images too and if the underlying data changes, boom, the image in your web page changes too. There is a lot of data in the workbook so the image returned by that previous URI is too large to show here so instead let’s take a look at a different resource, this time a range: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Ranges('Data!A1|C15') That URI returns cells A1 to C15 from a worksheet called “Data”: And if we ask for that as an image again: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Ranges('Data!A1|C15')?$format=image Were this image resource not behind a username/password then this would be a live image of the data in the workbook as opposed to one that I had to copy and upload elsewhere. Nonetheless I hope this little wrinkle doesn't detract from the inate value of what I am trying to articulate here; that an existing image in a web page can be changed on-the-fly simply by inserting some data into an Excel workbook. I for one think that that is very cool indeed! I think that's enough in the way of demo for now as this shows what is possible using Excel Services' REST API. Of course, not all features work quite how I would like and here is a bulleted list of some of my more negative feedback: The URIs are pig-ugly. Are "_vti_bin" & "ExcelRest.aspx" really necessary as part of the URI? Would this not be better: http://server/Documents/TourismExpenditureInMillionsOfUSD.xlsx/Model/Tables(‘Table1’) That URI provides the necessary addressability and is a lot easier to remember. Discoverability of these resources is not easy, we essentially have to handcrank a URI ourselves. Take the example of embedding a chart into a blog post - would it not be better if I could browse first through the document library to an Excel workbook and THEN through the workbook to the chart/range/table that I am interested in? Call it a wizard if you like. That would be really cool and would, I am sure, promote this feature and cut down on the copy-and-paste disease that the REST API is meant to alleviate. The resources that I demonstrated can be returned as feeds as well as images or HTML simply by changing the format parameter to ?$format=atom however for some inexplicable reason they don't return OData and no-one on the Excel Services team can tell me why (believe me, I have asked). $format is an OData parameter however other useful parameters such as $top and $filter are not supported. It would be nice if they were. Although I haven't demonstrated it here Excel Services' REST API does provide a makeshift way of altering the data by changing the value of specific cells however what it does not allow you to do is add new data into the workbook. Google Docs allows this and was one of the motivating factors for Chris Webb's forum post that I linked to above. None of this works for Excel workbooks hosted on SkyDrive This blog post is as long as it needs to be for a short introduction so I'll stop now. If you want to know more than I recommend checking out a few links: Excel Services REST API documentation on MSDNSo what does REST on Excel Services look like??? by Shahar PrishExcel Services in SharePoint 2010 REST API Syntax by Christian Stich. Any thoughts? Let's hear them in the comments section below! @Jamiet 

  Read the article

• Week in Geek: IPv6 Capable Smartphones Compromise User Privacy Edition

  - by Asian Angel

  This week we learned how to “clone a disk, resize static windows, and create system function shortcuts”, use 45 different services, sites, and apps to help read favorite sites, add MP3 support to Audacity (for saving in MP3 format), install a Wii game loader for easy backups and fast load times, create a Blue Screen of Death in any color, and more. Photo by legofenris. Weekly News Links Photo by The H Security. IPv6: Smartphones compromise users’ privacy Since version 4 of the iOS operating system, Apple’s iPhones, iPads and iPods have been capable of handling IPv6, and most Android devices have been capable since version 2.1. However, the operating systems transfer an ID that discloses information about their users. Dumb phones can be attacked too Much of the discussion of security threats to mobile phones revolves around smartphones, but researchers have found that less advanced “feature phones,” still used by the majority of people around the world, also are vulnerable to attack. SCADA exploit – the dragon awakes The recent publication of an exploit for KingView, a software package for visualising industrial process control systems, appears to be having an effect. Threatpost reports that both the Chinese vendor Wellintech and Chinese CERT (CN-CERT) have now reacted. Sophos: Spam to get more malicious Spam is becoming more malicious in nature as trickery tactics change in line with current user interests, according to a new report released Tuesday by Sophos. Global spam traffic rebounds as Rustock wakes Spam is on the rise after the Rustock botnet awoke from its Christmas slumber, according to Symantec. Cracking WPA keys in the cloud At the forthcoming Black Hat conference, blogger Thomas Roth plans to demonstrate how weak WPA PSKs can be cracked quickly and easily using Amazon’s Elastic Compute Cloud (EC2) service. Microsoft Security Advisory: Vulnerability in Internet Explorer could allow remote code execution Provides a link to more details about the vulnerability and shows a work-around/fix for the problem. Adobe plans to make it easier to delete Flash cookies in web browsers The new API, NPAPI:ClearSiteData, will allow Flash cookies – also known as Local Shared Objects (LSO) – to be deleted directly in the browser’s settings. Firefox beta getting new database standard The ninth beta version of Firefox is set to get support for a standard called IndexedDB that provides a database interface useful for offline data storage and other tasks needing information on a browser’s computer. MetroPCS accused of blocking certain Net content MetroPCS is violating the FCC’s recently approved Net neutrality rules by blocking certain Internet content, say several public interest groups. Server and Tools chief Muglia to leave Microsoft in summer 2011 Microsoft veteran and Server & Tools Business (STB) President Bob Muglia is leaving Microsoft, according to an email that CEO Steve Ballmer sent to employees on January 10. Report: DOJ nearing decision on Google-ITA The U.S. Department of Justice is gearing up for a possible formal antitrust investigation into whether or not Google should be allowed to purchase travel software company ITA Software, according to a report. South Korea says Google Street View broke law Police in South Korea reportedly say Google broke the country’s law when its Street View service captured personal data from unsecure Wi-Fi networks. The backlash over Google’s HTML5 video bet Choosing strategies based on what you believe to be long-term benefits is generally a good idea when running a business, but if you manage to alienate the world in the process, the long term may become irrelevant. Google answers critics on HTML5 Web video move Google responded to critics of its decision to drop support for a popular HTML5 video codec by declaring that a royalty-supported standard for Web video will hold the Web hostage. Random TinyHacker Links A Special GiveAway: a Great Book & Great Security Software The team from 7 Tutorials has a special giveaway running during the month of January. Signed copies of their latest book, full 1-year licenses of BitDefender Internet Security 2011 and free 3-month trials for everyone willing to participate. One Click Rooting For Android Phones Here’s a nice tool that helps you root your Android phone effortlessly. New Angry Birds Free version 1.0 Available in the App Store. Google Code University Learn programming at Google Code University. Capture and Share Your Favorite Part Of a YouTube Video SnipSnip.it lets you share only the part of the video that you like. Super User Questions More great questions and answers from this past week’s popular topics at Super User. What are the Windows A: and B: drives used for? Does OS X support linux-like features? What is the easiest way to make a backup of an entire hard disk? Will shifting from Wireless to Wired network result in better performance? Is it legal to install Windows 7 Home Premium Retail inside VMware virtual machine? How-To Geek Weekly Article Recap Enjoy reading through our hottest articles from this past week. The 50 Best Ways to Disable Built-in Windows Features You Don’t Want The Best of CES (Consumer Electronics Show) in 2011 How to Upgrade Windows 7 Easily (And Understand Whether You Should) The Worst of CES (Consumer Electronics Show) in 2011 The How-To Geek Guide to Audio Editing: Basic Noise Removal One Year Ago on How-To Geek More great articles from one year ago filled with helpful geeky goodness for you to enjoy. Share Text & Images the Easy Way with JustPaste.it Start Portable Firefox in Safe Mode Firefox 3.6 Release Candidate Available, Here’s How to Fix Your Incompatible Extensions Protect Your Computer from “Little Hands” with KidSafe Lock Prying Eyes Out of Your Minimized Windows Custom Crocheted Cylon-Cthulhu Hybrid What happens when you let your Cylon Centurion figure and your crocheted Cthulhu spend too many lonely nights together? A Cylon-Cthulhu hybrid, of course! You can get your own from the Cthulhu Chick store over on Etsy. Note: This is not an ad…Ruth is a friend of ours, and this Cylon-Cthulhu hybrid makes the perfect guard for the new MVP trophy in our office. The Geek Note Whether it is a geeky indoor project or just getting outside, we hope that you and your families have a terrific fun-filled weekend! Remember to keep sending those great tips in to us at [email protected]. Photo by qwrrty. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Firefox 4.0 Beta 9 Available for Download – Get Your Copy Now The Frustrations of a Computer Literate Watching a Newbie Use a Computer [Humorous Video] Season0nPass Jailbreaks Current Gen Apple TVs IBM’s Jeopardy Playing Computer Watson Shows The Pros How It’s Done [Video] Tranquil Juice Drop Abstract Wallpaper Pulse Is a Sleek Newsreader for iOS and Android Devices

  Read the article

• User Guide to Dropbox Shared Folders

  - by Matthew Guay

  Dropbox is an incredibly useful tool for keeping all your files synced between your computers and the cloud.  Here we’re going to look at how you can keep all of your team on the same page with Dropbox shared folders. Creating a Shared Folder Setting up a shared folder in Dropbox is easy.  Add the files you want to share to a folder in Dropbox on your computer, then right-click in the folder, select Dropbox, and then choose Share This Folder.   Alternately, log into your Dropbox account online, click the drop-down menu beside the folder you want to share, and click Share this folder. Now, enter the email addresses of the people you want to share the folder with, and optionally enter a message explaining why you’re sharing the folder. The people you invite will receive an email inviting them to view and join the shared folder.  If they haven’t signed up for Dropbox, they can directly signup; otherwise, they can simply log into their Dropbox account and start adding or editing files. Shared folders have a slightly different icon in your Dropbox.  Notice the shared folder on the left has an icon with 2 people, while the folder on the right that is not shared, shows previews of its contents. See Your Shared Folder’s History Whenever your collaborators with your shared folders add or change files, you will see a tooltip notification telling you what changed. You can also view the changes online.  Log into your Dropbox account in your browser and select the Events tab.  This shows all changes to your Dropbox, but you can view only the changes in your shared folder by selecting its name on the left sidebar. Now you can see all recent changes to your folder, and can also see who added or removed each file.   On the bottom of the page, you can even add a comment that all the collaborators will see. If someone deleted a file you still need, you can restore it by clicking its link in this online history.  Or, you can view any deleted files by right-clicking in your Dropbox folder in Explorer.  Select Dropbox, and then click Show Deleted Files.   Get Notified When a Change is Made You’re not always in front of your computer; you’ve got a life beyond your projects, after all (at least hopefully).  If you really want to stay connected to what’s happening with your project, though, you can easily do that no matter where you are. Your shared Dropbox folder’s history page offers an RSS feed of all changes to the folder.  Click  the Subscribe to this feed hyperlink. Now, in the popup that opens, click “Copy to clipboard” so you can use this RSS feed. You can subscribe to RSS feeds through many web browsers, email clients, dedicated feed readers, and more.  In Firefox, Internet Explorer 7/8, or Opera, you can paste the feed address into your address bar and subscribe to the feed directly in your browser.   However, subscribing to the feed in a desktop application won’t help you much when you’re away from your computer.  One great option is to subscribe in the popular Google Reader.  Then you can check your feed from any browser, on any computer or mobile device. To add your Dropbox feed to Google Reader, log into Google Reader (link below), click Add a subscription on the top left, paste your RSS feed from Dropbox, and click Add.   Now you can see any changes to files or folders in Google Reader. You can even add your feed to your iGoogle homepage.  Click the Add it Now button on the right in the front page of Google Reader to add your feeds to iGoogle.   Now you can see updates on your files from your homepage.  If you’re using a different computer, just login to your Google account to see what’s happening. You can also access your Google Reader feeds from many programs and apps for most major Smartphones including iPhone, Windows Phone, and Blackberry. Receive a Tweet or Text When Changes are Made If you’re a hyper-connected individual, chances are you send and receive tweets on the go.  If so, this might be the best way for you to get notified when changes are made to your Dropbox shared folder.  To do this, first create a new Twitter account to publish your changes through.  If you don’t want the whole world to see your updates, click Settings and set your new Twitter account to Private. Once the new account is created, follow it with your normal Twitter account so you’ll see updates. Now, let’s publish our Dropbox RSS feed to Twitter.  Create an account with Twitterfeed (link below). Once your account is setup, add your feed to it.  Name your feed, and enter your Feed address from Dropbox.  Click Advanced Settings to make your feed work just like you want. In Advanced Settings, change the frequency to “Every 30 mins” to make sure you’re updated on changes as quick as possible.  You can also change other settings if you like. Click “Continue to Step 2”, and then click Twitter under the available services to add your account. Make sure your signed into your new Twitter account, and then click Authenticate Twitter. Allow the application. Now, finally, click Create Service. Whenever a change is made, you will receive a tweet via your new Twitter account.  And since you can receive tweets via text message or many mobile applications, you’ll never be very far away from your Dropbox changes!   Conclusion Dropbox shared folders are a great way to keep your whole team working together on the same files in a project.  And with these handy tricks, you can keep up with your shared files wherever you are! There are a lot of cool things you can do with Dropbox make sure to check out our posts on adding Dropbox to the Windows 7 Start menu, Accessing Dropbox files from Chrome, and Syncing your Pidgin Profile Across Multiple PCs. Links Signup or access your Dropbox account Google Reader Tweet your feed with Twitterfeed Similar Articles Productive Geek Tips How to Add and Manage Shared Folders on Windows Home ServerManage User Accounts in Windows Home ServerAdd "My Dropbox" to Your Windows 7 Start MenuComplete Guide to Networking Windows 7 with XP and VistaMoving Your Personal Data Folders in Windows Vista the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7

  Read the article

• Using the BAM Interceptor with Continuation

  - by Charles Young

  Originally posted on: http://geekswithblogs.net/cyoung/archive/2014/06/02/using-the-bam-interceptor-with-continuation.aspxI’ve recently been resurrecting some code written several years ago that makes extensive use of the BAM Interceptor provided as part of BizTalk Server’s BAM event observation library.  In doing this, I noticed an issue with continuations.  Essentially, whenever I tried to configure one or more continuations for an activity, the BAM Interceptor failed to complete the activity correctly.   Careful inspection of my code confirmed that I was initializing and invoking the BAM interceptor correctly, so I was mystified.  However, I eventually found the problem.  It is a logical error in the BAM Interceptor code itself. The BAM Interceptor provides a useful mechanism for implementing dynamic tracking.  It supports configurable ‘track points’.  These are grouped into named ‘locations’.  BAM uses the term ‘step’ as a synonym for ‘location’.   Each track point defines a BAM action such as starting an activity, extracting a data item, enabling a continuation, etc.  Each step defines a collection of track points. Understanding Steps The BAM Interceptor provides an abstract model for handling configuration of steps.  It doesn’t, however, define any specific configuration mechanism (e.g., config files, SSO, etc.)  It is up to the developer to decide how to store, manage and retrieve configuration data.  At run time, this configuration is used to register track points which then drive the BAM Interceptor. The full semantics of a step are not immediately clear from Microsoft’s documentation.  They represent a point in a business activity where BAM tracking occurs.  They are named locations in the code.  What is less obvious is that they always represent either the full tracking work for a given activity or a discrete fragment of that work which commences with the start of a new activity or the continuation of an existing activity.  The BAM Interceptor enforces this by throwing an error if no ‘start new’ or ‘continue’ track point is registered for a named location. This constraint implies that each step must marked with an ‘end activity’ track point.  One of the peculiarities of BAM semantics is that when an activity is continued under a correlated ID, you must first mark the current activity as ‘ended’ in order to ensure the right housekeeping is done in the database.  If you re-start an ended activity under the same ID, you will leave the BAM import tables in an inconsistent state.  A step, therefore, always represents an entire unit of work for a given activity or continuation ID.  For activities with continuation, each unit of work is termed a ‘fragment’. Instance and Fragment State Internally, the BAM Interceptor maintains state data at two levels.  First, it represents the overall state of the activity using a ‘trace instance’ token.  This token contains the name and ID of the activity together with a couple of state flags.  The second level of state represents a ‘trace fragment’.   As we have seen, a fragment of an activity corresponds directly to the notion of a ‘step’.  It is the unit of work done at a named location, and it must be bounded by start and end, or continue and end, actions. When handling continuations, the BAM Interceptor differentiates between ‘root’ fragments and other fragments.  Very simply, a root fragment represents the start of an activity.  Other fragments represent continuations.  This is where the logic breaks down.  The BAM Interceptor loses state integrity for root fragments when continuations are defined. Initialization Microsoft’s BAM Interceptor code supports the initialization of BAM Interceptors from track point configuration data.  The process starts by populating an Activity Interceptor Configuration object with an array of track points.  These can belong to different steps (aka ‘locations’) and can be registered in any order.  Once it is populated with track points, the Activity Interceptor Configuration is used to initialise the BAM Interceptor.  The BAM Interceptor sets up a hash table of array lists.  Each step is represented by an array list, and each array list contains an ordered set of track points.  The BAM Interceptor represents track points as ‘executable’ components.  When the OnStep method of the BAM Interceptor is called for a given step, the corresponding list of track points is retrieved and each track point is executed in turn.  Each track point retrieves any required data using a call back mechanism and then serializes a BAM trace fragment object representing a specific action (e.g., start, update, enable continuation, stop, etc.).  The serialised trace fragment is then handed off to a BAM event stream (buffered or direct) which takes the appropriate action. The Root of the Problem The logic breaks down in the Activity Interceptor Configuration.  Each Activity Interceptor Configuration is initialised with an instance of a ‘trace instance’ token.  This provides the basic metadata for the activity as a whole.  It contains the activity name and ID together with state flags indicating if the activity ID is a root (i.e., not a continuation fragment) and if it is completed.  This single token is then shared by all trace actions for all steps registered with the Activity Interceptor Configuration. Each trace instance token is automatically initialised to represent a root fragment.  However, if you subsequently register a ‘continuation’ step with the Activity Interceptor Configuration, the ‘root’ flag is set to false at the point the ‘continue’ track point is registered for that step.   If you use a ‘reflector’ tool to inspect the code for the ActivityInterceptorConfiguration class, you can see the flag being set in one of the overloads of the RegisterContinue method.    This makes no sense.  The trace instance token is shared across all the track points registered with the Activity Interceptor Configuration.  The Activity Interceptor Configuration is designed to hold track points for multiple steps.  The ‘root’ flag is clearly meant to be initialised to ‘true’ for the preliminary root fragment and then subsequently set to false at the point that a continuation step is processed.  Instead, if the Activity Interceptor Configuration contains a continuation step, it is changed to ‘false’ before the root fragment is processed.  This is clearly an error in logic. The problem causes havoc when the BAM Interceptor is used with continuation.  Effectively the root step is no longer processed correctly, and the ultimate effect is that the continued activity never completes!   This has nothing to do with the root and the continuation being in the same process.  It is due to a fundamental mistake of setting the ‘root’ flag to false for a continuation before the root fragment is processed. The Workaround Fortunately, it is easy to work around the bug.  The trick is to ensure that you create a new Activity Interceptor Configuration object for each individual step.  This may mean filtering your configuration data to extract the track points for a single step or grouping the configured track points into individual steps and the creating a separate Activity Interceptor Configuration for each group.  In my case, the first approach was required.  Here is what the amended code looks like: // Because of a logic error in Microsoft's code, a separate ActivityInterceptorConfiguration must be used // for each location. The following code extracts only those track points for a given step name (location). var trackPointGroup = from ResolutionService.TrackPoint tp in bamActivity.TrackPoints                       where (string)tp.Location == bamStepName                       select tp; var bamActivityInterceptorConfig =     new Microsoft.BizTalk.Bam.EventObservation.ActivityInterceptorConfiguration(activityName); foreach (var trackPoint in trackPointGroup) {     switch (trackPoint.Type)     {         case TrackPointType.Start:             bamActivityInterceptorConfig.RegisterStartNew(trackPoint.Location, trackPoint.ExtractionInfo);             break; etc… I’m using LINQ to filter a list of track points for those entries that correspond to a given step and then registering only those track points on a new instance of the ActivityInterceptorConfiguration class.   As soon as I re-wrote the code to do this, activities with continuations started to complete correctly.

  Read the article

• UppercuT &ndash; Custom Extensions Now With PowerShell and Ruby

  - by Robz / Fervent Coder

  Arguably, one of the most powerful features of UppercuT (UC) is the ability to extend any step of the build process with a pre, post, or replace hook. This customization is done in a separate location from the build so you can upgrade without wondering if you broke the build. There is a hook before each step of the build has run. There is a hook after. And back to power again, there is a replacement hook. If you don’t like what the step is doing and/or you want to replace it’s entire functionality, you just drop a custom replacement extension and UppercuT will perform the custom step instead. Up until recently all custom hooks had to be written in NAnt. Now they are a little sweeter because you no longer need to use NAnt to extend UC if you don’t want to. You can use PowerShell. Or Ruby.   Let that sink in for a moment. You don’t have to even need to interact with NAnt at all now. Extension Points On the wiki, all of the extension points are shown. The basic idea is that you would put whatever customization you are doing in a separate folder named build.custom. Each step Let’s take a look at all we can customize: The start point is default.build. It calls build.custom/default.pre.build if it exists, then it runs build/default.build (normal tasks) OR build.custom/default.replace.build if it exists, and finally build.custom/default.post.build if it exists. Every step below runs with the same extension points but changes on the file name it is looking for. NOTE: If you include default.replace.build, nothing else will run because everything is called from default.build.    * policyChecks.step    * versionBuilder.step NOTE: If you include build.custom/versionBuilder.replace.step, the items below will not run.      - svn.step, tfs.step, or git.step (the custom tasks for these need to go in build.custom/versioners)    * generateBuildInfo.step    * compile.step    * environmentBuilder.step    * analyze.step NOTE: If you include build.custom/analyze.replace.step, the items below will not run.      - test.step (the custom tasks for this need to go in build.custom/analyzers) NOTE: If you include build.custom/analyzers/test.replace.step, the items below will not run.        + mbunit2.step, gallio.step, or nunit.step (the custom tasks for these need to go in build.custom/analyzers)      - ncover.step (the custom tasks for this need to go in build.custom/analyzers)      - ndepend.step (the custom tasks for this need to go in build.custom/analyzers)      - moma.step (the custom tasks for this need to go in build.custom/analyzers)    * package.step NOTE: If you include build.custom/package.replace.step, the items below will not run.      - deploymentBuilder.step Customize UppercuT Builds With PowerShell UppercuT can now be extended with PowerShell (PS). To customize any extension point with PS, just add .ps1 to the end of the file name and write your custom tasks in PowerShell. If you are not signing your scripts you will need to change a setting in the UppercuT.config file. This does impose a security risk, because this allows PS to now run any PS script. This setting stays that way on ANY machine that runs the build until manually changed by someone. I’m not responsible if you mess up your machine or anyone else’s by doing this. You’ve been warned. Now that you are fully aware of any security holes you may open and are okay with that, let’s move on. Let’s create a file called default.replace.build.ps1 in the build.custom folder. Open that file in notepad and let’s add this to it: write-host "hello - I'm a custom task written in Powershell!" Now, let’s run build.bat. You could get some PSake action going here. I won’t dive into that in this post though. Customize UppercuT Builds With Ruby If you want to customize any extension point with Ruby, just add .rb to the end of the file name and write your custom tasks in Ruby.  Let’s write a custom ruby task for UC. If you were thinking it would be the same as the one we just wrote for PS, you’d be right! In the build.custom folder, lets create a file called default.replace.build.rb. Open that file in notepad and let’s put this in there: puts "I'm a custom ruby task!" Now, let’s run build.bat again. That’s chunky bacon. UppercuT and Albacore.NET Just for fun, I wanted to see if I could replace the compile.step with a Rake task. Not just any rake task, Albacore’s msbuild task. Albacore is a suite of rake tasks brought about by Derick Bailey to make building .NET with Rake easier. It has quite a bit of support with developers that are using Rake to build code. In my build.custom folder, I drop a compile.replace.step.rb. I also put in a separate file that will contain my Albacore rake task and I call that compile.rb. What are the contents of compile.replace.step.rb? rake = 'rake' arguments= '-f ' + Dir.pwd + '/../build.custom/compile.rb' #puts "Calling #{rake} " + arguments system("#{rake} " + arguments) Since the custom extensions call ruby, we have to shell back out and call rake. That’s what we are doing here. We also realize that ruby is called from the build folder, so we need to back out and dive into the build.custom folder to find the file that is technically next to us. What are the contents of compile.rb? require 'rubygems' require 'fileutils' require 'albacore' task :default => [:compile] puts "Using Ruby to compile UppercuT with Albacore Tasks" desc 'Compile the source' msbuild :compile do |msb| msb.properties = { :configuration => :Release, :outputpath => '../../build_output/UppercuT' } msb.targets [:clean, :build] msb.verbosity = "quiet" msb.path_to_command = 'c:/Windows/Microsoft.NET/Framework/v3.5/MSBuild.exe' msb.solution = '../uppercut.sln' end We are using the msbuild task here. We change the output path to the build_output/UppercuT folder. The output path has “../../” because this is based on every project. We could grab the current directory and then point the task specifically to a folder if we have projects that are at different levels. We want the verbosity to be quiet so we set that as well. So what kind of output do you get for this? Let’s run build.bat custom_tasks_replace:      [echo] Running custom tasks instead of normal tasks if C:\code\uppercut\build\..\build.custom\compile.replace.step exists.      [exec] (in C:/code/uppercut/build)      [exec] Using Ruby to compile UppercuT with Albacore Tasks      [exec] Microsoft (R) Build Engine Version 3.5.30729.4926      [exec] [Microsoft .NET Framework, Version 2.0.50727.4927]      [exec] Copyright (C) Microsoft Corporation 2007. All rights reserved. If you think this is awesome, you’d be right!   With this knowledge you shall build.

  Read the article

• Conversion of BizTalk Projects to Use the New WCF-SAP Adaptor

  - by Geordie

  We are in the process of upgrading our BizTalk Environment from BizTalk 2006 R2 to BizTalk 2010. The SAP adaptor in BizTalk 2010 is an all new and more powerful WCF-SAP adaptor. When my colleagues tested out the new adaptor they discovered that the format of the data extracted from SAP was not identical to the old adaptor. This is not a big deal if the structure of the messages from SAP is simple. In this case we were receiving the delivery and invoice iDocs. Both these structures are complex especially the delivery document. Over the past few years I have tweaked the delivery mapping to remove bugs from original mapping. The idea of redoing these maps did not appeal and due to the current work load was not even an option. I opted for a rather crude alternative of pulling in the iDoc in the new typed format and then adding a static map at the start of the orchestration to convert the data to the old schema.  Note WCF-SAP data formats (on the binding tab of the configuration dialog box is the ‘RecieiveIdocFormat’ field): Typed:  Returns a XML document with the hierarchy represented in XML and all fields being represented by XML tags. RFC: Returns an XML document with the hierarchy represented in XML but the iDoc lines in flat file format. String: This returns the iDoc in a format that is closest to the original flat file format but is still wrapped with some top level XML tags. The files also contained some strange characters at the end of each line. I started with the invoice document and it was quite straight forward to add the mapping but this is where my problems started. The orchestrations for these documents are dynamic and so require the identity of the partner to be able to correctly configure the orchestration. The partner identity is in the EDI_DC40 segment of the iDoc. In the old project the RECPRN node of the segment was promoted. The code to set a variable to the partner ID was now failing. After lot of head scratching I discovered the problem was due to the addition of Namespaces to the fields in the EDI_DC40 segment. To overcome this I needed to use an xPath query with a Namespace Manager. This had to be done in custom code. I now tried to repeat the process with the delivery document. Unfortunately when we tried to get sample typed data from SAP an exception was thrown. The adapter "WCF-SAP" raised an error message. Details "Microsoft.ServiceModel.Channels.Common.XmlReaderGenerationException: The segment or group definition E2EDKA1001 was not found in the IDoc metadata. The UniqueId of the IDoc type is: IDOCTYP/3/DESADV01/ZASNEXT1/640. For Receive operations, the SAP adapter does not support unreleased segments.   Our guess is that when the WCF-SAP adaptor tries to down load the data it retrieves a data schema from SAP. For some reason the schema does not match the data. This may be due to the version of SAP we are running or due to a customization. Either way resolving this problem did not look easy. When doing some research on this problem I found an article showing me how to get the data from SAP using the WCF-SAP adaptor without any XML tags. http://blogs.msdn.com/b/adapters/archive/2007/10/05/receiving-idocs-getting-the-raw-idoc-data.aspx Reproduction of Mustansir blog: Since the WCF based SAP Adapter is ... well, WCF based, all data flowing in and out of the adapter is encapsulated within a SOAP message. Which means there are those pesky xml tags all over the place. If you want to receive an Idoc from SAP, you can receive it in "Typed" format (in which case each column in each segment of the idoc appears within its own xml tag), or you can receive it in "String" format (in which case there are just 2 xml tags at the top, the raw xml data in string/flat file format, and the 2 closing xml tags). In "String" format, an incoming idoc (for ORDERS05, containing 5 data records) would look like: <ReceiveIdoc ><idocData>EDI_DC40 8000000000001064985620 E2EDK01005 800000000000106498500000100000001 E2EDK14 8000000000001064985000002000000020111000 E2EDK14 8000000000001064985000003000000020081000 E2EDK14 80000000000010649850000040000000200710 E2EDK14 80000000000010649850000050000000200600</idocData></ReceiveIdoc> (I have trimmed part of the control record so that it fits cleanly here on one line). Now, you're only interested in the IDOC data, and don't care much for the XML tags. It isn't that difficult to write your own pipeline component, or even some logic in the orchestration to remove the tags, right? Well, you don't need to write any extra code at all - the WCF Adapter can help you here! During the configuration of your one-way Receive Location using WCF-Custom, navigate to the Messages tab. Under the section "Inbound BizTalk Messge Body", select the "Path" radio button, and: (a) Enter the body path expression as: /*[local-name()='ReceiveIdoc']/*[local-name()='idocData'] (b) Choose "String" for the Node Encoding. What we've done is, used an XPATH to pull out the value of the "idocData" node from the XML. Your Receive Location will now emit text containing only the idoc data. You can at this point, for example, put the Flat File Pipeline component to convert the flat text into a different xml format based on some other schema you already have, and receive your version of the xml formatted message in your orchestration.   This was potentially a much easier solution than adding the static maps to the orchestrations and overcame the issue with ‘Typed’ delivery documents. Not quite so fast… Note: When I followed Mustansir’s blog the characters at the end of each line disappeared. After configuring the adaptor and passing the iDoc data into the original flat file receive pipelines I was receiving exceptions. There was a failure executing the receive pipeline: "PAPINETPipelines.DeliveryFlatFileReceive, CustomerIntegration2.PAPINET.Pipelines, Version=1.0.0.0, Culture=neutral, PublicKeyToken=4ca3635fbf092bbb" Source: "Pipeline " Receive Port: "recSAP_Delivery" URI: "D:\CustomerIntegration2\SAP\Delivery\*.xml" Reason: An error occurred when parsing the incoming document: "Unexpected data found while looking for: 'Z2EDPZ7' The current definition being parsed is E2EDP07GRP. The stream offset where the error occured is 8859. The line number where the error occured is 23. The column where the error occured is 0.". Although the new flat file looked the same as the old one there was a differences. In the original file all lines in the document were exactly 1064 character long. In the new file all lines were truncated to the last alphanumeric character. The final piece of the puzzle was to add a custom pipeline component to pad all the lines to 1064 characters. This component was added to the decode node of the custom delivery and invoice flat file disassembler pipelines. Execute method of the custom pipeline component: public IBaseMessage Execute(IPipelineContext pc, IBaseMessage inmsg) { //Convert Stream to a string Stream s = null; IBaseMessagePart bodyPart = inmsg.BodyPart;   // NOTE inmsg.BodyPart.Data is implemented only as a setter in the http adapter API and a //getter and setter for the file adapter. Use GetOriginalDataStream to get data instead. if (bodyPart != null) s = bodyPart.GetOriginalDataStream();   string newMsg = string.Empty; string strLine; try { StreamReader sr = new StreamReader(s); strLine = sr.ReadLine(); while (strLine != null) { //Execute padding code if (strLine != null) strLine = strLine.PadRight(1064, ' ') + "\r\n"; newMsg += strLine; strLine = sr.ReadLine(); } sr.Close(); } catch (IOException ex) { throw new Exception("Error occured trying to pad the message to 1064 charactors"); }   //Convert back to stream and set to Data property inmsg.BodyPart.Data = new MemoryStream(Encoding.UTF8.GetBytes(newMsg)); ; //reset the position of the stream to zero inmsg.BodyPart.Data.Position = 0; return inmsg; }

  Read the article

• Running TeamCity from Amazon EC2 - Cloud based scalable build and continuous Integration

  - by RoyOsherove

  I’ve been having fun playing with the amazon EC2 cloud service. I set up a server running TeamCity, and an image of a server that just runs a TeamCity agent. I also setup TeamCity  to automatically instantiate agents on EC2 and shut them down based upon availability of free agents. Here’s how I did it: The first step was setting up the teamcity server. Create an account on amazon EC2 (BTW, amazon’s sites works better in IE than it does in chrome.. who knew!?) Open the EC2 dashboard, and click “Launch Instance” . From the “Quick Start” tab I selected from the list: “Getting Started on Microsoft Windows Server 2008 (AMI Id: ami-c5e40dac)” .  it’s good enough to just run teamcity. In the instance details, I used the default (Small instance, 1.7 GB mem). You might want to choose a close availability zone based on where you are. We want to “Launch instances” so click continue. Select the default kernel, RAM disk and all. No need to enable monitoring for now (you can do that later). click continue. If you don’t have a key pair, you will be prompted to create one. Once you do, select it in the list. Now you’ll be prompted to create a security group. I named mine “TC” as in “TeamCity”. each group is a bunch of settings on which ports can be let through into and out of a hosted machine.  keep it as the default settings. We will change them later. Click continue,  review and then click “Launch”. Now you’ll be able to see the new instance in the running instances list on your site. Now, you need to install stuff on that instance (TeamCity!) . To do that, you’ll need to Remote desktop into that instance. To do that, we’ll get the admin password for that instance: Check it on the list, and click “Instance Actions” - “Get Windows Admin Password”. You might have to wait about 10 minutes or so for the password to be generated for you. Once you have the password, you will remote desktop (start-run-‘mstsc’) into the instance. It’s address is a dns address shown below the list under “Public DNS”. it looks something like: ec2-256-226-194-91.compute-1.amazonaws.com Once you’re inside the instance – you’ll need to open IE (it is in hardened mode so you’ll have to relax its security settings to download stuff). I first downloaded chrome and using chrome I downloaded TeamCity. Note that the download speed is FAST. several MBs per second. To be able to see TeamCity from the outside, you will need to open the advanced firewall settings inside the remote machine, and add incoming and outgoing rules for port 80 (HTTP). Once you do that, you should be able to see the machine from the outside. If you still can’t, see the next step. I also enabled ports 9090 since I will use this machine to create an agent image later as well. Now configure the security group (TC) to enable talking to agents: IN the EC2 dashboard click on “Security Groups” and select your group. To add a rule, click on the empty list under the ‘protocol’ header. select TCP. from and ‘to’ ports are 9090. source ip is 0.0.0.0/0 (every ip is allowed). click “Save.  Also make sure you can see “HTTP” tcp 80 in that list. if you can’t see it, add it or you won’t be able to browse to the machine’s teamcity server home page. I also set an elastic IP for the machine: so I always have the same IP for the machine instance. Allocate and set one through the”Elastic IP” link on the EC2 dashboard.   you should now have a working instance of teamcity.   Now let’s create an agent image. Repeat steps 1-9, but this time, make sure you select a machine that fits what an agent might do. I selected Instance type – Hihg-CPU medium machine,  that is much faster. On that machine, I installed what I needed (VS 2010, PostSharp etc..). downloading VS 2010 from MSDN (2 GB took less than 10 min!) Now, instead of installing teamcity, browse using the browser to the teamcity homepage (from within the remote machine). go to the Administration page, and click the upper right link “Install agents”. Install the agent on he local machine – set it to the IP or DNS of the running TeamCity server. That way you’ll be able to check their connectivity live before making this machine your official agent image to reuse. Once the agent is installed, see that the TC server can see it and use it. see steps 13-14 above if they can’t. Once it works, you can take steps to make this image your agent image to be reused. next, here is a copy-paste of several steps to take from http://confluence.jetbrains.net/display/TCD5/Setting+Up+TeamCity+for+Amazon+EC2 Configure system so that agent it is started on machine boot (and make sure TeamCity server is accessible on machine boot). Test the setup by rebooting machine and checking that the agent connects normally to the server. Prepare the Image for bundling: Remove any temporary/history information in the system. Stop the agent (under Windows stop the service but leave it in Automatic startup type) Delete content agent logs and temp directories (not necessary) Delete "<Agent Home>/conf/amazon-*" file (not necessary) Change config/buildAgent.properties to remove properties: name, serverAddress, authToken (not necessary)   Now, we need to: Make AMI from the running instance. Configure TeamCity EC2 support on TeamCity server. Making an AMI: Check the instance of the agent in the EC2 dashboard instance list, and select instance actions->Create Image (EBS AMI) you’ll see the image pending in the APIs list in the EC2 dashboard. this could take 30 minutes or more. meanwhile we can configure the could support in the teamcity server. COPY THE AMI ID to the clipboard (looks like ami-a88aa4ce) Configuring TeamCity for Cloud: In TeamCity, click on “Agents” and then on “Cloud” tab. this is where you will control your cloud agents. to configure new cloud agents based on APIs, click on the right link to the “configuration page” Create a new profile and select AMazon EC2 as cloud type. Use your AMI ID that you copied to the clipboard into the “Images” field. Select an availability zone that is the same as the one your instance is running on for best communication perf between them make sure you select the ‘TC’ security group hopefully, that should be it, and teamcity will try to instantiate new instances on demand. Note that it may take around 10 minutes for an agent to become available to teamcity from the time it’s started.

  Read the article

• Exploring the Excel Services REST API

  - by jamiet

  Over the last few years Analysis Services guru Chris Webb and I have been on something of a crusade to enable better access to data that is locked up in countless Excel workbooks that litter the hard drives of enterprise PCs. The most prominent manifestation of that crusade up to now has been a forum thread that Chris began on Microsoft Answers entitled Excel Web App API? Chris began that thread with: I was wondering whether there was an API for the Excel Web App? Specifically, I was wondering if it was possible (or if it will be possible in the future) to expose data in a spreadsheet in the Excel Web App as an OData feed, in the way that it is possible with Excel Services? Up to recently the last 10 words of that paragraph "in the way that it is possible with Excel Services" had completely washed over me however a comment on my recent blog post Thoughts on ExcelMashup.com (and a rant) by Josh Booker in which Josh said: Excel Services is a service application built for sharepoint 2010 which exposes a REST API for excel documents. We're looking forward to pros like you giving it a try now that Office365 makes sharepoint more easily accessible.  Can't wait for your future blog about using REST API to load data from Excel on Offce 365 in SSIS. made me think that perhaps the Excel Services REST API is something I should be looking into and indeed that is what I have been doing over the past few days. And you know what? I'm rather impressed with some of what Excel Services' REST API has to offer. Unfortunately Excel Services' REST API also has one debilitating aspect that renders this blog post much less useful than it otherwise would be; namely that it is not publicly available from the Excel Web App on SkyDrive. Therefore all I can do in this blog post is show you screenshots of what the REST API provides in Sharepoint rather than linking you directly to those REST resources; that's a great shame because one of the benefits of a REST API is that it is easily and ubiquitously demonstrable from a web browser. Instead I am hosting a workbook on Sharepoint in Office 365 because that does include Excel Services' REST API but, again, all I can do is show you screenshots. N.B. If anyone out there knows how to make Office-365-hosted spreadsheets publicly-accessible (i.e. without requiring a username/password) please do let me know (because knowing which forum on which to ask the question is an exercise in futility). In order to demonstrate Excel Services' REST API I needed some decent data and for that I used the World Tourism Organization Statistics Database and Yearbook - United Nations World Tourism Organization dataset hosted on Azure Datamarket (its free, by the way); this dataset "provides comprehensive information on international tourism worldwide and offers a selection of the latest available statistics on international tourist arrivals, tourism receipts and expenditure" and you can explore the data for yourself here. If you want to play along at home by viewing the data as it exists in Excel then it can be viewed here. Let's dive in.   The root of Excel Services' REST API is the model resource which resides at: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model Note that this is true for every workbook hosted in a Sharepoint document library - each Excel workbook is a RESTful resource. (Update: Mark Stacey on Twitter tells me that "It's turned off by default in onpremise Sharepoint (1 tickbox to turn on though)". Thanks Mark!) The data is provided as an ATOM feed but I have Firefox's feed reading ability turned on so you don't see the underlying XML goo. As you can see there are four top level resources, Ranges, Charts, Tables and PivotTables; exploring one of those resources is where things get interesting. Let's take a look at the Tables Resource: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Tables Our workbook contains only one table, called ‘Table1’ (to reiterate, you can explore this table yourself here). Viewing that table via the REST API is pretty easy, we simply append the name of the table onto our previous URI: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Tables('Table1') As you can see, that quite simply gives us a representation of the data in that table. What you cannot see from this screenshot is that this is pure HTML that is being served up; that is all well and good but actually we can do more interesting things. If we specify that the data should be returned not as HTML but as: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Tables('Table1')?$format=image then that data comes back as a pure image and can be used in any web page where you would ordinarily use images. This is the thing that I really like about Excel Services’ REST API – we can embed an image in any web page but instead of being a copy of the data, that image is actually live – if the underlying data in the workbook were to change then hitting refresh will show a new image. Pretty cool, no? The same is true of any Charts or Pivot Tables in your workbook - those can be embedded as images too and if the underlying data changes, boom, the image in your web page changes too. There is a lot of data in the workbook so the image returned by that previous URI is too large to show here so instead let’s take a look at a different resource, this time a range: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Ranges('Data!A1|C15') That URI returns cells A1 to C15 from a worksheet called “Data”: And if we ask for that as an image again: http://server/_vti_bin/ExcelRest.aspx/Documents/TourismExpenditureInMillionsOfUSD.xlsx/model/Ranges('Data!A1|C15')?$format=image Were this image resource not behind a username/password then this would be a live image of the data in the workbook as opposed to one that I had to copy and upload elsewhere. Nonetheless I hope this little wrinkle doesn't detract from the inate value of what I am trying to articulate here; that an existing image in a web page can be changed on-the-fly simply by inserting some data into an Excel workbook. I for one think that that is very cool indeed! I think that's enough in the way of demo for now as this shows what is possible using Excel Services' REST API. Of course, not all features work quite how I would like and here is a bulleted list of some of my more negative feedback: The URIs are pig-ugly. Are "_vti_bin" & "ExcelRest.aspx" really necessary as part of the URI? Would this not be better: http://server/Documents/TourismExpenditureInMillionsOfUSD.xlsx/Model/Tables(‘Table1’) That URI provides the necessary addressability and is a lot easier to remember. Discoverability of these resources is not easy, we essentially have to handcrank a URI ourselves. Take the example of embedding a chart into a blog post - would it not be better if I could browse first through the document library to an Excel workbook and THEN through the workbook to the chart/range/table that I am interested in? Call it a wizard if you like. That would be really cool and would, I am sure, promote this feature and cut down on the copy-and-paste disease that the REST API is meant to alleviate. The resources that I demonstrated can be returned as feeds as well as images or HTML simply by changing the format parameter to ?$format=atom however for some inexplicable reason they don't return OData and no-one on the Excel Services team can tell me why (believe me, I have asked). $format is an OData parameter however other useful parameters such as $top and $filter are not supported. It would be nice if they were. Although I haven't demonstrated it here Excel Services' REST API does provide a makeshift way of altering the data by changing the value of specific cells however what it does not allow you to do is add new data into the workbook. Google Docs allows this and was one of the motivating factors for Chris Webb's forum post that I linked to above. None of this works for Excel workbooks hosted on SkyDrive This blog post is as long as it needs to be for a short introduction so I'll stop now. If you want to know more than I recommend checking out a few links: Excel Services REST API documentation on MSDNSo what does REST on Excel Services look like??? by Shahar PrishExcel Services in SharePoint 2010 REST API Syntax by Christian Stich. Any thoughts? Let's hear them in the comments section below! @Jamiet 

  Read the article

• How to Easily Put a Windows PC into Kiosk Mode With Assigned Access

  - by Chris Hoffman

  Windows 8.1′s Assigned Access feature allows you to easily lock a Windows PC to a single application, such as a web browser. This feature makes it easy for anyone to configure Windows 8.1 devices as point-of-sale or other kiosk systems. In the past, setting up a Windows PC in kiosk mode involved much more work, requiring the use of third-party software, group policy, or Linux distributions designed around kiosk mode. Assigned Access is available on Windows 8.1 RT, Windows 8.1 Professional, and Windows 8.1 Enterprise. The standard edition of Windows 8.1 doesn’t support Assigned Access. Create a User Account for Assigned Access Rather than turn your entire computer into a locked-down kiosk system, Assigned Access allows you to create a separate user account that can only launch a single app — such as a web browser. To set this up, you must be logged into Windows as a user with administrator permissions. First, open the PC settings app — swipe in from the right or press Windows Key + C to open the charms bar, tap Settings, and tap Change PC settings. In the PC settings app, select Accounts and select Other accounts. Use the Add an account button to create a new Windows account. Select  the “Sign in without a Microsoft account” option and select Local account to create a local user account. You could also create a Microsoft account, but you may not want to do this if you just want a locked-down account with only browser access. If you need to install apps from the Windows Store to use in Assigned Access mode, you’ll have to set up a Microsoft account instead of a local account. A local account will still allow you access to the preinstalled apps, such as Internet Explorer. You may want to create a user account with a blank password. This would make it simple for anyone to access kiosk mode, even if the system becomes locked or needs to be rebooted. The account will be created as a standard user account with limited permissions. Leave it as a standard user account — don’t make it an administrator account. Set Up Assigned Access Once you’ve created an account, you’ll first need to sign into it. If you don’t, you’ll see a “This account has no apps” message when trying to enable Assigned Access. Go back to the welcome screen, log in to the new account you created, and allow Windows to go through the first-time account setup process. If you want to use a non-default app in kiosk mode, install it while logged in as that user account. Once you’re done, log out of the other account, log back in as your administrator account, and go back to the Other accounts screen. Click the Set up an account for assigned access option to continue. Select the user account you created and select the app you want to limit the account to. For a web-based kiosk, this can be a web browser such as the Modern version of Internet Explorer. Businesses can also create their own Modern apps and set them to run in kiosk mode in this way. Note that Microsoft’s documentation says “web browsers are not good choices for assigned access” because they require more permissions than average Modern (or “Windows Store”) apps. However, if you want to provide a kiosk for web-browsing, using Assigned Access is a much better option than using Guest Mode and offering up a full Windows desktop. When you’re done, restart your PC and log in as the Assigned Access account. Windows will automatically open the app you chose and won’t allow a user to leave that app. Standard Windows 8 features like the charms bar, app switcher, and Start screen won’t appear. Pressing the Windows key once will do nothing. To sign out of Assigned Access mode, press the Windows key five times — quickly — while signed in. You’ll be sent back to the standard login screen. The account will actually still be logged in and the app will remain running — this method just “locks” the screen and allows another user to log in. Automatically Log Into Assigned Access Whenever your Windows device boots, you can log into the Assigned Access account and turn it into a kiosk system. While this isn’t ideal for all kiosk systems, you may want the device to automatically launch the specific app when it boots without requiring any login process. To do so, you’ll just need to have Windows automatically log into the Assigned Access account when it boots. This option is hidden and not available in the standard Control Panel. You’ll need to use the hidden netplwiz Control Panel tool to set up automatic login on boot. If you didn’t create a password for the user account, leave the Password field empty while configuring this. Security Considerations If you’re using this feature to turn a Windows 8.1 system into a kiosk and leaving it open to the public, remember to consider security. Anyone could come up to the system, press the Windows key five times, and try to log into your standard administrator user account. Ensure the administrator user account has a strong password so people won’t be able to get past the kiosk system’s limitations and tamper with the system. Even Windows 8′s detractors have to admit that it’s an ideal system for a touch-screen kiosk device, running either a browser or another specific application. Assigned Access finally makes this easy to set up on Windows systems in the real world — no IT experience, third-party software, or Linux distributions necessary.     

  Read the article

• CI Deployment Of Azure Web Roles Using TeamCity

  - by srkirkland

  After recently migrating an important new website to use Windows Azure “Web Roles” I wanted an easier way to deploy new versions to the Azure Staging environment as well as a reliable process to rollback deployments to a certain “known good” source control commit checkpoint.  By configuring our JetBrains’ TeamCity CI server to utilize Windows Azure PowerShell cmdlets to create new automated deployments, I’ll show you how to take control of your Azure publish process. Step 0: Configuring your Azure Project in Visual Studio Before we can start looking at automating the deployment, we should make sure manual deployments from Visual Studio are working properly.  Detailed information for setting up deployments can be found at http://msdn.microsoft.com/en-us/library/windowsazure/ff683672.aspx#PublishAzure or by doing some quick Googling, but the basics are as follows: Install the prerequisite Windows Azure SDK Create an Azure project by right-clicking on your web project and choosing “Add Windows Azure Cloud Service Project” (or by manually adding that project type) Configure your Role and Service Configuration/Definition as desired Right-click on your azure project and choose “Publish,” create a publish profile, and push to your web role You don’t actually have to do step #4 and create a publish profile, but it’s a good exercise to make sure everything is working properly.  Once your Windows Azure project is setup correctly, we are ready to move on to understanding the Azure Publish process. Understanding the Azure Publish Process The actual Windows Azure project is fairly simple at its core—it builds your dependent roles (in our case, a web role) against a specific service and build configuration, and outputs two files: ServiceConfiguration.Cloud.cscfg: This is just the file containing your package configuration info, for example Instance Count, OsFamily, ConnectionString and other Setting information. ProjectName.Azure.cspkg: This is the package file that contains the guts of your deployment, including all deployable files. When you package your Azure project, these two files will be created within the directory ./[ProjectName].Azure/bin/[ConfigName]/app.publish/.  If you want to build your Azure Project from the command line, it’s as simple as calling MSBuild on the “Publish” target: msbuild.exe /target:Publish Windows Azure PowerShell Cmdlets The last pieces of the puzzle that make CI automation possible are the Azure PowerShell Cmdlets (http://msdn.microsoft.com/en-us/library/windowsazure/jj156055.aspx).  These cmdlets are what will let us create deployments without Visual Studio or other user intervention. Preparing TeamCity for Azure Deployments Now we are ready to get our TeamCity server setup so it can build and deploy Windows Azure projects, which we now know requires the Azure SDK and the Windows Azure PowerShell Cmdlets. Installing the Azure SDK is easy enough, just go to https://www.windowsazure.com/en-us/develop/net/ and click “Install” Once this SDK is installed, I recommend running a test build to make sure your project is building correctly.  You’ll want to setup your build step using MSBuild with the “Publish” target against your solution file.  Mine looks like this: Assuming the build was successful, you will now have the two *.cspkg and *cscfg files within your build directory.  If the build was red (failed), take a look at the build logs and keep an eye out for “unsupported project type” or other build errors, which will need to be addressed before the CI deployment can be completed. With a successful build we are now ready to install and configure the Windows Azure PowerShell Cmdlets: Follow the instructions at http://msdn.microsoft.com/en-us/library/windowsazure/jj554332 to install the Cmdlets and configure PowerShell After installing the Cmdlets, you’ll need to get your Azure Subscription Info using the Get-AzurePublishSettingsFile command. Store the resulting *.publishsettings file somewhere you can get to easily, like C:\TeamCity, because you will need to reference it later from your deploy script. Scripting the CI Deploy Process Now that the cmdlets are installed on our TeamCity server, we are ready to script the actual deployment using a TeamCity “PowerShell” build runner.  Before we look at any code, here’s a breakdown of our deployment algorithm: Setup your variables, including the location of the *.cspkg and *cscfg files produced in the earlier MSBuild step (remember, the folder is something like [ProjectName].Azure/bin/[ConfigName]/app.publish/ Import the Windows Azure PowerShell Cmdlets Import and set your Azure Subscription information (this is basically your authentication/authorization step, so protect your settings file Now look for a current deployment, and if you find one Upgrade it, else Create a new deployment Pretty simple and straightforward.  Now let’s look at the code (also available as a gist here: https://gist.github.com/3694398): $subscription = "[Your Subscription Name]" $service = "[Your Azure Service Name]" $slot = "staging" #staging or production $package = "[ProjectName]\bin\[BuildConfigName]\app.publish\[ProjectName].cspkg" $configuration = "[ProjectName]\bin\[BuildConfigName]\app.publish\ServiceConfiguration.Cloud.cscfg" $timeStampFormat = "g" $deploymentLabel = "ContinuousDeploy to $service v%build.number%"   Write-Output "Running Azure Imports" Import-Module "C:\Program Files (x86)\Microsoft SDKs\Windows Azure\PowerShell\Azure\*.psd1" Import-AzurePublishSettingsFile "C:\TeamCity\[PSFileName].publishsettings" Set-AzureSubscription -CurrentStorageAccount $service -SubscriptionName $subscription   function Publish(){ $deployment = Get-AzureDeployment -ServiceName $service -Slot $slot -ErrorVariable a -ErrorAction silentlycontinue   if ($a[0] -ne $null) { Write-Output "$(Get-Date -f $timeStampFormat) - No deployment is detected. Creating a new deployment. " } if ($deployment.Name -ne $null) { #Update deployment inplace (usually faster, cheaper, won't destroy VIP) Write-Output "$(Get-Date -f $timeStampFormat) - Deployment exists in $servicename. Upgrading deployment." UpgradeDeployment } else { CreateNewDeployment } }   function CreateNewDeployment() { write-progress -id 3 -activity "Creating New Deployment" -Status "In progress" Write-Output "$(Get-Date -f $timeStampFormat) - Creating New Deployment: In progress"   $opstat = New-AzureDeployment -Slot $slot -Package $package -Configuration $configuration -label $deploymentLabel -ServiceName $service   $completeDeployment = Get-AzureDeployment -ServiceName $service -Slot $slot $completeDeploymentID = $completeDeployment.deploymentid   write-progress -id 3 -activity "Creating New Deployment" -completed -Status "Complete" Write-Output "$(Get-Date -f $timeStampFormat) - Creating New Deployment: Complete, Deployment ID: $completeDeploymentID" }   function UpgradeDeployment() { write-progress -id 3 -activity "Upgrading Deployment" -Status "In progress" Write-Output "$(Get-Date -f $timeStampFormat) - Upgrading Deployment: In progress"   # perform Update-Deployment $setdeployment = Set-AzureDeployment -Upgrade -Slot $slot -Package $package -Configuration $configuration -label $deploymentLabel -ServiceName $service -Force   $completeDeployment = Get-AzureDeployment -ServiceName $service -Slot $slot $completeDeploymentID = $completeDeployment.deploymentid   write-progress -id 3 -activity "Upgrading Deployment" -completed -Status "Complete" Write-Output "$(Get-Date -f $timeStampFormat) - Upgrading Deployment: Complete, Deployment ID: $completeDeploymentID" }   Write-Output "Create Azure Deployment" Publish   Creating the TeamCity Build Step The only thing left is to create a second build step, after your MSBuild “Publish” step, with the build runner type “PowerShell”.  Then set your script to “Source Code,” the script execution mode to “Put script into PowerShell stdin with “-Command” arguments” and then copy/paste in the above script (replacing the placeholder sections with your values).  This should look like the following:   Wrap Up After combining the MSBuild /target:Publish step (which creates the necessary Windows Azure *.cspkg and *.cscfg files) and a PowerShell script step which utilizes the Azure PowerShell Cmdlets, we have a fully deployable build configuration in TeamCity.  You can configure this step to run whenever you’d like using build triggers – for example, you could even deploy whenever a new master branch deploy comes in and passes all required tests. In the script I’ve hardcoded that every deployment goes to the Staging environment on Azure, but you could deploy straight to Production if you want to, or even setup a deployment configuration variable and set it as desired. After your TeamCity Build Configuration is complete, you’ll see something that looks like this: Whenever you click the “Run” button, all of your code will be compiled, published, and deployed to Windows Azure! One additional enormous benefit of automating the process this way is that you can easily deploy any specific source control changeset by clicking the little ellipsis button next to "Run.”  This will bring up a dialog like the one below, where you can select the last change to use for your deployment.  Since Azure Web Role deployments don’t have any rollback functionality, this is a critical feature.   Enjoy!

  Read the article

• Underwriting in a New Frontier: Spurring Innovation

  - by [email protected]

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} Susan Keuer, product strategy manager for Oracle Insurance, shares her experiences and insight from the 2010 Association of Home Office Underwriters (AHOU) Annual Conference, April 11-14, in San Antonio, Texas    How can I be more innovative in underwriting?  It's a common question I hear from insurance carriers, producers and others, so it was no surprise that it was the key theme at the recent 2010 AHOU Annual Conference.  This year's event drew more than 900 insurance professionals involved in the underwriting process across life and annuities, property and casualty and reinsurance from around the globe, including the U.S., Canada, Australia, Bahamas, and more, to San Antonio - a Texas city where innovation transformed a series of downtown drainage canals into its premiere River Walk tourist destination.   CNN's Medical Correspondent Dr. Sanjay Gupta kicked off the conference with a phenomenal opening session that drove home the theme of the conference, "Underwriting in a New Frontier:  Spurring Innovation."   Drawing from his own experience as a neurosurgeon treating critically injured medical patients in the field in Iraq, Gupta inspired audience members to think outside the box during the underwriting process. He shared a compelling story of operating on a soldier who had suffered a head-related trauma in a field hospital.  With minimal supplies available Gupta used a Black and Decker saw to operate on the soldier's head and reduce pressure on his swelling brain. Drawing from this example, Gupta encouraged underwriters to think creatively, be innovative, and consider new tools and sources of information, such as social networking sites, during the underwriting process. So as you are looking at risk take into consideration all resources you have available.    Gupta also stressed the concept of IKIGAI - noting that individuals who believe that their life is worth living are less likely to die than are their counterparts without this belief.  How does one quantify this approach to life or thought process when evaluating risk?  Could this be something to consider as a "category" in the near future? How can this same belief in your own work spur innovation?   The role of technology was a hot topic of discussion throughout the conference.  Sessions delved into the latest in underwriting software to the rise of social media and how it is being increasingly integrated into underwriting process and solutions.  In one session a trio of panelists representing the carrier, producer and vendor communities stressed the importance to underwriters of leveraging new technology and the plethora of online information sources, which all could be used to accurately, honestly and consistently evaluate the risk throughout the underwriting process.   Another focused on the explosion of social media noting:  1.    Social media is growing exponentially - About eight percent of Americans used social media five years ago. Today about 46 percent of Americans do so, with 85 percent of financial services professionals using social media in their work.  2.    It will impact your business - Underwriters reconfirmed over and over that they are increasingly using "free" tools that are available in cyberspace in lieu of more costly solutions, such as inspection reports conducted by individuals in the field.  3.    Information is instantly available on the Web, anytime, anywhere - LinkedIn was mentioned as a way to connect to peers in the underwriting community and producers alike.  Many carriers and agents also are using Facebook to promote their company to customers - and as a point-of-entry to allow them to perform some functionality - such as accessing product marketing information versus directing users to go to the carrier's own proprietary website.  Other carriers have released their tight brand marketing to allow their producers to drive more business to their personal Facebook site where they offer innovative tools such as Application Capture or asking medical information in a more relaxed fashion.     Other key topics at the conference included the economy, ongoing industry consolidation, real-estate valuations as an asset and input into the underwriting process, and producer trends.  All stressed a "back to basics" approach for low cost, term products.   Finally, Connie Merritt, RN, PHN, entertained the large group of atttendees with audience-engaging insight on how to "Tame the Lions in Your Life - Dealing with Complainers, Bullies, Grump and Curmudgeon." Merritt noted "we are too busy for our own good." She shared how her overachieving personality had impacted her life.  Audience members then were asked to pick red, yellow, blue, or green shapes, without knowing that each one represented a specific personality trait.  For example, those who picked blue were the peacemakers. Those who choose yellow were social - the hint was to "Be Quiet Longer."  She then offered these "lion taming" steps:   1.    Admit It 2.    Accept It 3.    Let Go 4.    Be Present (which paralleled Gupta's IKIGAI concept)   When thinking about underwriting I encourage you to be present in the moment and think creatively, but don't be afraid to look ahead to the future and be an innovator.  I hope to see you at next year's AHOU Annual Conference, May 1-4, 2011 at The Mirage in Las Vegas, Nev.     Susan Keuer is the product strategy manager for new business underwriting.  She brings more than 20 years of insurance industry experience working with leading insurance carriers and technology companies to her role on the product strategy team for life/annuities solutions within the Oracle Insurance Global Business Unit  

  Read the article

• Why isn't pyinstaller making me an .exe file?

  - by Matt Miller

  I am attempting to follow this guide to make a simple Hello World script into an .exe file. I have Windows Vista with an AMD 64-bit processor I have installed Python 2.6.5 (Windows AMD64 version) I have set the PATH (if that's the right word) so that the command line recognizes Python I have installed UPX (there only seems to be a 32-bit version for Windows) and pasted a copy of upx.exe into the Python26 folder as instructed. I have installed Pywin (Windows AMD 64 Python 2.6 version) I have run Pyinstaller's Configure.py. It gives some error messages but seems to complete. I don't know if this is what's causing the problem, so the following is what it says when I run it: C:\Python26\Pyinstaller\branches\py26winConfigure.py I: read old config from C:\Python26\Pyinstaller\branches\py26win\config.dat I: computing EXE_dependencies I: Finding TCL/TK... I: Analyzing C:\Python26\DLLs_tkinter.pyd W: Cannot get binary dependencies for file: W: C:\Python26\DLLs_tkinter.pyd W: Traceback (most recent call last): File "C:\Python26\Pyinstaller\branches\py26win\bindepend.py", line 608, in get Imports return _getImports_pe(pth) File "C:\Python26\Pyinstaller\branches\py26win\bindepend.py", line 275, in _ge tImports_pe importva, importsz = datadirs[1] IndexError: list index out of range I: Analyzing C:\Python26\DLLs_ctypes.pyd W: Cannot get binary dependencies for file: W: C:\Python26\DLLs_ctypes.pyd W: Traceback (most recent call last): File "C:\Python26\Pyinstaller\branches\py26win\bindepend.py", line 608, in get Imports return _getImports_pe(pth) File "C:\Python26\Pyinstaller\branches\py26win\bindepend.py", line 275, in _ge tImports_pe importva, importsz = datadirs[1] IndexError: list index out of range I: Analyzing C:\Python26\DLLs\select.pyd W: Cannot get binary dependencies for file: W: C:\Python26\DLLs\select.pyd W: Traceback (most recent call last): File "C:\Python26\Pyinstaller\branches\py26win\bindepend.py", line 608, in get Imports return _getImports_pe(pth) File "C:\Python26\Pyinstaller\branches\py26win\bindepend.py", line 275, in _ge tImports_pe importva, importsz = datadirs[1] IndexError: list index out of range I: Analyzing C:\Python26\DLLs\unicodedata.pyd W: Cannot get binary dependencies for file: W: C:\Python26\DLLs\unicodedata.pyd W: Traceback (most recent call last): File "C:\Python26\Pyinstaller\branches\py26win\bindepend.py", line 608, in get Imports return _getImports_pe(pth) File "C:\Python26\Pyinstaller\branches\py26win\bindepend.py", line 275, in _ge tImports_pe importva, importsz = datadirs[1] IndexError: list index out of range I: Analyzing C:\Python26\DLLs\bz2.pyd W: Cannot get binary dependencies for file: W: C:\Python26\DLLs\bz2.pyd W: Traceback (most recent call last): File "C:\Python26\Pyinstaller\branches\py26win\bindepend.py", line 608, in get Imports return _getImports_pe(pth) File "C:\Python26\Pyinstaller\branches\py26win\bindepend.py", line 275, in _ge tImports_pe importva, importsz = datadirs[1] IndexError: list index out of range I: Analyzing C:\Python26\python.exe I: Dependent assemblies of C:\Python26\python.exe: I: amd64_Microsoft.VC90.CRT_1fc8b3b9a1e18e3b_9.0.21022.8_none I: Searching for assembly amd64_Microsoft.VC90.CRT_1fc8b3b9a1e18e3b_9.0.21022.8_ none... I: Found manifest C:\Windows\WinSxS\Manifests\amd64_microsoft.vc90.crt_1fc8b3b9a 1e18e3b_9.0.21022.8_none_750b37ff97f4f68b.manifest I: Searching for file msvcr90.dll I: Found file C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.21 022.8_none_750b37ff97f4f68b\msvcr90.dll I: Searching for file msvcp90.dll I: Found file C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.21 022.8_none_750b37ff97f4f68b\msvcp90.dll I: Searching for file msvcm90.dll I: Found file C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.21 022.8_none_750b37ff97f4f68b\msvcm90.dll I: Adding Microsoft.VC90.CRT\Microsoft.VC90.CRT.manifest I: Adding Microsoft.VC90.CRT\msvcr90.dll I: Adding Microsoft.VC90.CRT\msvcp90.dll I: Adding Microsoft.VC90.CRT\msvcm90.dll W: Cannot get binary dependencies for file: W: C:\Python26\python.exe W: Traceback (most recent call last): File "C:\Python26\Pyinstaller\branches\py26win\bindepend.py", line 608, in get Imports return _getImports_pe(pth) File "C:\Python26\Pyinstaller\branches\py26win\bindepend.py", line 275, in _ge tImports_pe importva, importsz = datadirs[1] IndexError: list index out of range I: Analyzing C:\Windows\WinSxS\Manifests\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e 3b_9.0.21022.8_none_750b37ff97f4f68b.manifest I: Analyzing C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.210 22.8_none_750b37ff97f4f68b\msvcr90.dll W: Cannot get binary dependencies for file: W: C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.21022.8_none_ 750b37ff97f4f68b\msvcr90.dll W: Traceback (most recent call last): File "C:\Python26\Pyinstaller\branches\py26win\bindepend.py", line 608, in get Imports return _getImports_pe(pth) File "C:\Python26\Pyinstaller\branches\py26win\bindepend.py", line 275, in _ge tImports_pe importva, importsz = datadirs[1] IndexError: list index out of range I: Analyzing C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.210 22.8_none_750b37ff97f4f68b\msvcp90.dll W: Cannot get binary dependencies for file: W: C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.21022.8_none_ 750b37ff97f4f68b\msvcp90.dll W: Traceback (most recent call last): File "C:\Python26\Pyinstaller\branches\py26win\bindepend.py", line 608, in get Imports return _getImports_pe(pth) File "C:\Python26\Pyinstaller\branches\py26win\bindepend.py", line 275, in _ge tImports_pe importva, importsz = datadirs[1] IndexError: list index out of range I: Analyzing C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.210 22.8_none_750b37ff97f4f68b\msvcm90.dll W: Cannot get binary dependencies for file: W: C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.21022.8_none_ 750b37ff97f4f68b\msvcm90.dll W: Traceback (most recent call last): File "C:\Python26\Pyinstaller\branches\py26win\bindepend.py", line 608, in get Imports return _getImports_pe(pth) File "C:\Python26\Pyinstaller\branches\py26win\bindepend.py", line 275, in _ge tImports_pe importva, importsz = datadirs[1] IndexError: list index out of range I: could not find TCL/TK I: testing for Zlib... I: ... Zlib available I: Testing for ability to set icons, version resources... I: ... resource update available I: Testing for Unicode support... I: ... Unicode available I: testing for UPX... I: ...UPX available I: computing PYZ dependencies... I: done generating C:\Python26\Pyinstaller\branches\py26win\config.dat My Python script (named Hello.py) is the same as the example: #!/usr/bin/env python for i in xrange(10000): print "Hello, World!" This is my BAT file, in the same directory: set PIP=C:\Python26\Pyinstaller\branches\py26win\ python %PIP%Makespec.py --onefile --console --upx --tk Hello.py python %PIP%Build.py Hello.spec When I run Hello.bat in the command prompt several files are made, none of which are an .exe file, and the following is displayed: C:\My Filesset PIP=C:\Python26\Pyinstaller\branches\py26win\ C:\My Filespython C:\Python26\Pyinstaller\branches\py26win\Makespec.py --onefil e --console --upx --tk Hello.py wrote C:\My Files\Hello.spec now run Build.py to build the executable C:\My Filespython C:\Python26\Pyinstaller\branches\py26win\Build.py Hello.spec I: Dependent assemblies of C:\Python26\python.exe: I: amd64_Microsoft.VC90.CRT_1fc8b3b9a1e18e3b_9.0.21022.8_none Traceback (most recent call last): File "C:\Python26\Pyinstaller\branches\py26win\Build.py", line 1359, in main(args[0], configfilename=opts.configfile) File "C:\Python26\Pyinstaller\branches\py26win\Build.py", line 1337, in main build(specfile) File "C:\Python26\Pyinstaller\branches\py26win\Build.py", line 1297, in build execfile(spec) File "Hello.spec", line 3, in pathex=['C:\My Files']) File "C:\Python26\Pyinstaller\branches\py26win\Build.py", line 292, in _init _ raise ValueError, "script '%s' not found" % script ValueError: script 'C:\Python26\Pyinstaller\branches\py26win\support\useTK.py' n ot found I have limited knowledge with the command prompt, so please take baby steps with me if I need to do something there.

  Read the article

• XBRL US Conference Highlights

  - by john.orourke(at)oracle.com

  Back in early November I had an opportunity to attend the XBRL US National Conference in Philadelphia.  At the event, XBRL US announced that Oracle had joined the initiative, so I had a chance to participate in a press conference and attend a number of sessions.  Oracle joined XBRL US so we can stay ahead of the standard and leverage it in our products, and to help drive awareness with customers and improve adoption of XBRL. There were roughly 250 attendees at the event, about half of which were vendors and consultants and the rest financial reporting staff from corporate filers.  Event sponsors included Ernst & Young, SWIFT and Fujitsu.  There were also a number of XBRL technology and service providers exhibiting at the conference.  On Monday Nov. 8th, the XBRL US Steering Committee meetings and Annual Members meeting and reception were held.  At the Annual Members meeting the big news was that current XBRL US President, Mark Bolgiano, is moving to a new position at Howard Hughes Medical Center.  Campbell Pryde, who had led the Taxonomy Development for XBRL US, is taking over as XBRL US President. Other items that were highlighted at the members meeting included: The US GAAP XBRL taxonomy is being used by over 1500 SEC filers and has now been handed over to the FASB to maintain and enhance 16 filer training events were held in 2010 XBRL Global Magazine was launched Corporate Actions proposal was submitted to the SEC with SWIFT in May XBRL Labs for iPhone, XBRL US Consistency Suite launched ISO 2022 Corporate Actions Alignment with XBRL achieved The XBRL Credit Rating taxonomy was accepted Tuesday Nov. 9th included Keynotes, General Sessions, Innovation Workshop for Governments and Securities Professionals, and an Opening Reception.  General sessions included: Lessons Learned from the SEC's rollout of XBRL.  More than 18,000 errors were identified in reviews of filings between June 2009 and September 2010.  Most of these related to negative values being used where they shouldn't have.  Also, the SEC feels there are too many taxonomy extensions being created - mostly in the Cash Flow Statements.  They emphasize using existing elements in the US GAAP taxonomy and advise filers not to  create extensions to improve the visual formatting of XBRL filings. Investors and XBRL - Setting the Standard for Data Quality.  In this panel discussion, the key learning was that CFA's, academics and the financial community are not using XBRL as expected.  The issues raised include the  accuracy and completeness of filings, number of taxonomy extensions, and limited number of tools available to help analyze XBRL data.  Another big issue that was raised is the lack of historic results in XBRL - most analysts need 10 quarters of historic data.  On the positive side, XBRL has the potential to eliminate re-keying of data and errors here and can improve analytic capabilities for financial analysts once more historic data is available and more companies are providing detailed tagging of their filings. A US Roadmap for XBRL Financial Reporting.  This was a panel discussion featuring Jeff Neumann(SEC), Campbell Pryde(XBRL US), and Louis Matherne(FASB).  Key points included the fact that XBRL is currently used by 1500 companies, with 8000 more companies coming in 2011.  XBRL for Mutual Fund Reporting will start in 2011 for 8000 funds, and a Credit Rating Taxonomy has now been submitted for review.  The XBRL tagging/filing process is improving each quarter - more education is helping here.  The FASB is looking at extensions to date, and potential additions to US GAAP taxonomy, while the SEC is evaluating filings for accuracy, consistency in tagging, and tools for analyzing data.  The big news is that the FASB 2011 US GAAP Taxonomy has been completed and reviewed by SEC.  The 2011 US GAAP Taxonomy supports new FASB accounting standards issued since 2009, has new taxonomy elements for certain industries (i.e airlines) and the elimination of 500 concepts.  (meaning they can't be used going forward but are still supported for historical comparison)  The 2011 US GAAP Taxonomy will be available for usage with Q2 2011 SEC filings.  More information about this can be found on the FASB web site.  http://www.fasb.org/home Accounting Firms and XBRL.  This session covered the Role of Audit Firms, which includes awareness and education, validation of XBRL filings, and in-house transition planning.  The main advice provided was that organizations should document XBRL mapping process, perform peer comparisons, and risk assessments on a regular basis. Wednesday Nov. 10th included more Keynotes, General Sessions on Corporate Actions, and XBRL Essentials Workshop Training for corporate filers.  The XBRL Essentials Training included: Getting Started Once you Have the Basics Detailed Footnote Tagging and Handling Tables Quality Control and Trust in the XBRL Process Bringing XBRL In-House:  What are the Options, What should you consider? The US GAAP Financial Reporting Taxonomy - Overview of the 2011 release The XBRL Essentials Training was well-attended with about 80 people.  This included a good overview of the SEC's XBRL mandate, limited liability issue, tagging levels, recommended planning process, internal vs. outsourced approach, and how to manage service providers.  I learned a lot from the session on detailed tagging.  This is the requirement that kicks in during a company's second year of XBRL filing with the SEC and applies to financial statements, footnotes and disclosures (it does not apply to MD&A, executive communications and other information).  The review of the Linkbase model, or dimensional table structure, was very interesting and can be complex to understand.  The key takeaway here is that using dimensional tables in XBRL filings can help limit the number of taxonomy extensions that are required.  The slides from this session are posted on the XBRL US web site. (http://xbrl.us/events/Pages/archive.aspx) For me, the main summary points and takeaways from the XBRL US conference are: XBRL for financial reporting has turned the corner and gone mainstream - with 1500 companies currently using it and 8000 more coming in 2011 The expected value is not being achieved by filers or consumers of XBRL data - this will improve when more companies are filing in XBRL, more history is available, and more software tools are available for analysis (hmm, sounds like an opportunity for Oracle) XBRL is becoming the global standard for all business communications beyond just the financials - i.e. adoption for mutual funds, corporate actions and others planned for the future If you would like to learn more about XBRL and the various training programs, services and software tools that are available check out the XBRL US web site and even better - become a member.  Here's a link:  http://xbrl.us/Pages/default.aspx

  Read the article

• CodePlex Daily Summary for Sunday, June 01, 2014

  CodePlex Daily Summary for Sunday, June 01, 2014Popular ReleasesSandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...Tooltip Web Preview: ToolTip Web Preview: Version 1.0Database Helper: Release 1.0.0.0: First Release of Database HelperCoMaSy: CoMaSy1.0.2: !Contact Management SystemImage View Slider: Image View Slider: This is a .NET component. We create this using VB.NET. Here you can use an Image Viewer with several properties to your application form. We wish somebody to improve freely. Try this out! Author : Steven Renaldo Antony Yustinus Arjuna Purnama Putra Andre Wijaya P Martin Lidau PBK GENAP 2014 - TI UKDWAspose for Apache POI: Missing Features of Apache POI WP - v 1.1: Release contain the Missing Features in Apache POI WP SDK in Comparison with Aspose.Words for dealing with Microsoft Word. What's New ?Following Examples: Insert Picture in Word Document Insert Comments Set Page Borders Mail Merge from XML Data Source Moving the Cursor Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: V1.5.6.0: V1.5.6.0 - 2014.5.30New feature: support quick-cocos2d-x project now; support text search in scripts folder now, you can use this function in Search Result Window;SEToolbox: 01.032.014 Release 1: Added fix when loading game Textures for icons causing 'Unable to read beyond the end of the stream'. Added new Resource Report, that displays all in game resources in a concise report. Added in temp directory cleaner, to keep excess files from building up. Fixed use of colors on the windows, to work better with desktop schemes. Adding base support for multilingual resources. This will allow loading of the Space Engineers resources to show localized names, and display localized date a...ClosedXML - The easy way to OpenXML: ClosedXML 0.71.2: More memory and performance improvements. Fixed an issue with pivot table field order.Fancontroller: Fancontroller: Initial releaseVi-AIO SearchBar: Vi – AIO Search Bar: Version 1.0Top Verses ( Ayat Emas ): Binary Top Verses: This one is the bin folder of the component. the .dll component is inside.Traditional Calendar Component: Traditional Calender Converter: Duta Wacana Christian University This file containing Traditional Calendar Component and Demo Aplication that using Traditional Calendar Component. This component made with .NET Framework 4 and the programming language is C# .SQLSetupHelper: 1.0.0.0: First Stable Version of SQL SetupComposite Iconote: Composite Iconote: This is a composite has been made by Microsoft Visual Studio 2013. Requirement: To develop this composite or use this component in your application, your computer must have .NET framework 4.5 or newer.Magick.NET: Magick.NET 6.8.9.101: Magick.NET linked with ImageMagick 6.8.9.1. Breaking changes: - Int/short Set methods of WritablePixelCollection are now unsigned. - The Q16 build no longer uses HDRI, switch to the new Q16-HDRI build if you need HDRI.fnr.exe - Find And Replace Tool: 1.7: Bug fixes Refactored logic for encoding text values to command line to handle common edge cases where find/replace operation works in GUI but not in command line Fix for bug where selection in Encoding drop down was different when generating command line in some cases. It was reported in: https://findandreplace.codeplex.com/workitem/34 Fix for "Backslash inserted before dot in replacement text" reported here: https://findandreplace.codeplex.com/discussions/541024 Fix for finding replacing...VG-Ripper & PG-Ripper: VG-Ripper 2.9.59: changes NEW: Added Support for 'GokoImage.com' links NEW: Added Support for 'ViperII.com' links NEW: Added Support for 'PixxxView.com' links NEW: Added Support for 'ImgRex.com' links NEW: Added Support for 'PixLiv.com' links NEW: Added Support for 'imgsee.me' links NEW: Added Support for 'ImgS.it' linksToolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2014.5.28): XrmToolbox improvement XrmToolBox updates (v1.2014.5.28)Fix connecting to a connection with custom authentication without saved password Tools improvement New tool!Solution Components Mover (v1.2014.5.22) Transfer solution components from one solution to another one Import/Export NN relationships (v1.2014.3.7) Allows you to import and export many to many relationships Tools updatesAttribute Bulk Updater (v1.2014.5.28) Audit Center (v1.2014.5.28) View Layout Replicator (v1.2014.5.28) Scrip...Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.10: Fix for Issue #20875 - echo switch doesn't work for CSS CSS should honor the SASS source-file comments JS should allow multi-line comment directivesNew ProjectsCet MicroWPF: WPF-like library for simple graphic-UI application using Netduino (Plus) 2 and the FTDI FT800 Eve board.Fakemons: Some Fakmons, powered by XML, XSLT, CSS and JavascriptFling OS: Fling OS is a C# operating system project aiming to create a new, managed operating system from the ground up.MudRoom: Experimental tool sets in mud parsing and area definitionOOP-2112110158: My name's NgocDungRoslynResearch: Roslyn ResearchTHD - Control de Usuarios: control de usuarios y permisosWPF Kinect User Controls: WPF Kinect User Control project provide simple Tilt and Skeleton Tracking Parameter Controls.

  Read the article

• Emit Knowledge - social network for knowledge sharing

  - by hajan

  Emit Knowledge, as the words refer - it's a social network for emitting / sharing knowledge from users by users. Those who can benefit the most out of this network is perhaps all of YOU who have something to share with others and contribute to the knowledge world. I've been closely communicating with the core team of this very, very interesting, brand new social network (with specific purpose!) about the concept, idea and the vision they have for their product and I can say with a lot of confidence that this network has real potential to become something from which we will all benefit. I won't speak much about that and would prefer to give you link and try it yourself - http://www.emitknowledge.com Mainly, through the past few months I've been testing this network and it is getting improved all the time. The user experience is great, you can easily find out what you need and it follows some known patterns that are common for all social networks. They have some real good ideas and plans that are already under development for the next updates of their product. You can do micro blogging or you can do regular normal blogging… it’s up to you, and the way it works, it is seamless. Here is a short Question and Answers (QA) interview I made with the lead of the team, Marijan Nikolovski: 1. Can you please explain us briefly, what is Emit Knowledge? Emit Knowledge is a brand new knowledge based social network, delivering quality content from users to users. We believe that people’s knowledge, experience and professional thoughts compose quality content, worth sharing among millions around the world. Therefore, we created the platform that matches people’s need to share and gain knowledge in the most suitable and comfortable way. Easy to work with, Emit Knowledge lets you to smoothly craft and emit knowledge around the globe. 2. How 'old' is Emit Knowledge? In hamster’s years we are almost five years old start-up :). Just kidding. We’ve released our public beta about three months ago. Our official release date is 27 of June 2012. 3. How did you come up with this idea? Everything started from a simple idea to solve a complex problem. We’ve seen that the social web has become polluted with data and is on the right track to lose its base principles – socialization and common cause. That was our start point. We’ve gathered the team, drew some sketches and started to mind map the idea. After several idea refactoring’s Emit Knowledge was born. 4. Is there any competition out there in the market? Currently we don't have any competitors that share the same cause. What makes our platform different is the ideology that our product promotes and the functionalities that our platform offers for easy socialization based on interests and knowledge sharing. 5. What are the main technologies used to build Emit Knowledge? Emit Knowledge was built on a heterogeneous pallet of technologies. Currently, we have four of separation: UI – Built on ASP.NET MVC3 and Knockout.js; Messaging infrastructure – Build on top of RabbitMQ; Background services – Our in-house solution for job distribution, orchestration and processing; Data storage – Build on top of MongoDB; What are the main reasons you've chosen ASP.NET MVC? Since all of our team members are .NET engineers, the decision was very natural. ASP.NET MVC is the only Microsoft web stack that sticks to the HTTP behavioral standards. It is easy to work with, have a tiny learning curve and everyone who is familiar with the HTTP will understand its architecture and convention without any difficulties. 6. What are the main reasons for choosing ASP.NET MVC? Since all of our team members are .NET engineers, the decision was very natural. ASP.NET MVC is the only Microsoft web stack that sticks to the HTTP behavioral standards. It is easy to work with, have a tiny learning curve and everyone who is familiar with the HTTP will understand its architecture and convention without any difficulties. 7. Did you use some of the latest Microsoft technologies? If yes, which ones? Yes, we like to rock the cutting edge tech house. Currently we are using Microsoft’s latest technologies like ASP.NET MVC, Web API (work in progress) and the best for the last; we are utilizing Windows Azure IaaS to the bone. 8. Can you please tell us shortly, what would be the benefit of regular bloggers in other blogging platforms to join Emit Knowledge? Well, unless you are some of the smoking ace gurus whose blogs are followed by a large number of users, our platform offers knowledge based segregated community equipped with tools that will enable both current and future users to expand their relations and to self-promote in the community based on their activity and knowledge sharing. 10. I see you are working very intensively and there is already integration with some third-party services to make the process of sharing and emitting knowledge easier, which services did you integrate until now and what do you plan do to next? We have “reemit” functionality for internal sharing and we also support external services like: Twitter; LinkedIn; Facebook; For the regular bloggers we have an extra cream, Windows Live Writer support for easy blog posts emitting. 11. What should we expect next? Currently, we are working on a new fancy community feature. This means that we are going to support user groups to be formed. So for all existing communities and user groups out there, wait us a little bit, we are coming for rescue :). One of the top next features they are developing is the Community Feature. It means, if you have your own User Group, Community Group or any other Group on which you and your users are mostly blogging or sharing (emitting) knowledge in various ways, Emit Knowledge as a platform will help you have everything you need to promote your group, make new followers and host all the necessary stuff that you have had need of. I would invite you to try the network and start sharing knowledge in a way that will help you gather new followers and spread your knowledge faster, easier and in a more efficient way! Let’s Emit Knowledge!

  Read the article

• WhatsApp &amp; Tasker for Android &ndash; Read &amp; Write messages

  - by Shaurya Anand

  So, I finally gave up on all my previous the Microsoft Mobile/Phone OS devices and made my switch to Android this year. I am using my Samsung Galaxy Note GT-N7000 with CyanogenMod 9.1.0 (http://get.cm/get/jenkins/7086/cm-9.1.0-n7000.zip) and ClockworkMod 6.0.1.2 (http://download2.clockworkmod.com/recoveries/recovery-clockwork-6.0.1.2-n7000.zip) since August this year and I am so happy with the performance and the flexibility it offers me. As a software developer by profession, I would expect most of my gadget to be highly customizable and programmable (one time or at intervals) to suit my needs as close as it can. I was introduced to Automation for Android – Tasker (https://play.google.com/store/apps/details?id=net.dinglisch.android.taskerm&hl=en) via reddit (http://www.reddit.com/r/tasker) and the word ‘automation’ was enough for me to dive right into this app. Only automation that I did earlier was switching profiles depending on location on there phones. And now, just imagine a complete set of possibilities that can be automate on the phone or via the phone. I did my research and found a couple of other tools that do the same/as close as what Tasker can do and few of them are even free. There’s one even by Microsoft called on{X} (https://play.google.com/store/apps/details?id=com.microsoft.onx.app&hl=en). Microsoft’s on{X} really caught my eye. You can write code for your phone on the web application by them, deploy it on your phone and even trace the flow all using your PC. Really brilliant, I love the fact that it’s all JavaScript. Here comes the but, it is still very very young and it’s policy of accessing my News Feed on Facebook is not something that I can not digest. On{X} is good, but as I said earlier, the API is not very mature and hence, I gave up on it. I bought Tasker, the best 5,00 € I spent in ages and I want to talk about it in this post. I am still a “noob” while operating this tool, but I tried my shot at automating WhatsApp (https://play.google.com/store/apps/details?id=com.whatsapp&hl=en), a popular messenger for various platform. The requirement for the automation is that, if I send a WhatsApp ‘wru’ message to the phone, it should respond back giving the location and battery level of my phone. It could be useful, if you like to locate your misplaced phone or automatically reply to your partner/friend, honestly, I don’t know what you will use it - through this post, I am just introducing automating WhatsApp using Tasker. Before we begin, the following script only works when your phone is rooted as we will be accessing the WhatsApp database and type some special characters like ‘:’. Let’s follow the code line by line: Profile:         Location request from XYZ. (12) // Name of your profile. Event:         Notification [ Owner Application:WhatsApp Title:* ] // When a new notification comes from WhatsApp, this event is fired. Read the end note, if you face problems with Chrome app after enabling Tasker accessibility. Enter:         A1: Run Shell [ Command:sqlite3 // We will access the WhatsApp database and check if the message comes from designated phone number or not. We mustn’t reply to every message.                 /data/data/com.whatsapp/databases/msgstore.db "SELECT _id, data FROM                  messages WHERE key_from_me='0' AND key_remote_jid LIKE '%XXXXXXXXXXX%' // Replace XXXXXXXXXXX with the phone number of your message sender.                 ORDER BY _id DESC LIMIT 1;" Timeout (Seconds):10 Use Root:On Store // I made a timeout for 10 seconds, if in case WhatsApp is busy accessing the database.                 Result In:%WHATSAPP_CURRREQ ] // Store the read Id and the last message on to the variable %WHATSAPP_CURRREQ         A2: If [ %WHATSAPP_CURRREQ ~R .*[wW][rR][uU].* ] // Check if the pattern of the message is correct and we are all set to send the location.                 A3: If [ %WHATSAPP_CURRREQ !~ %WHATSAPP_LASTREQ ] // Verify that the message is different from the last request. Remember every message has a unique Id.                         A4: Notify [ Title:WhatsApp location request... Text:Sending location // Just a notification that the location message is being prepared.                                 to Krati Gupta... Icon:<icon> Number:0 Permanent:On Priority:3 ] // Make a note it is a permanent notification, we will clear it later.                         A5: Secure Settings [ Configuration:Pattern Lock Disabled // I am disabling the pattern lock, that I use using the plugin Secure Settings.                                 Package:com.intangibleobject.securesettings.plugin Name:Secure // You can download the plugin from here: https://play.google.com/store/apps/details?id=com.intangibleobject.securesettings.plugin&hl=en                                 Settings ]                         A6: Secure Settings [ Configuration:Keyguard Disabled // Disable the keygaurd, it is useful, when your phone is on lock and you want to automate everything, even the typing.                                 Package:com.intangibleobject.securesettings.plugin Name:Secure                                 Settings ]                         A7: Secure Settings [ Configuration:GPS Enabled // Pretty clear, turn on the GPS and get location at A8                                 Package:com.intangibleobject.securesettings.plugin Name:Secure                                 Settings ]                         A8: AutoShortcut [ Configuration:WhatsApp: Some One // I am using AutoShortcut plugin (https://play.google.com/store/apps/details?id=com.joaomgcd.autoshortcut) to start WhatsApp with the indented recipient.                                 Package:com.joaomgcd.autoshortcut Name:AutoShortcut ] // Replace Some One, actually choose it from the plugin, the right recipient.                         A9: Get Location [ Source:Any Timeout (Seconds):30 Continue Task // I am getting the location, timeout is 30 seconds, adjust it accordingly.                                 Immediately:Off Keep Tracking:Off ]                         A10: Secure Settings [ Configuration:Screen Dim // Now, this extension of the plugin Secure Settings, wakes your device so that you can type out the string on the WhatsApp app.                                 5 Seconds Package:com.intangibleobject.securesettings.plugin                                 Name:Secure Settings ]                         A11: Run Shell [ Command:input text // Now, I am using the shell script to type the text to the window, because the ‘:’ while not be typed from the Type task in Tasker.                                 LOCATION:maps.google.com/maps?q=%LOC Timeout (Seconds):0 Use Root:On // And also, this is way faster, but remember you need root for this, not for the other way of typing.                                 Store Result In: ]                         A12: Dpad [ Button:Right Repeat Times:1 ] // Focus the Send button                         A13: Dpad [ Button:Press Repeat Times:1 ] // And press it.                         A14: Dpad [ Button:Left Repeat Times:1 ] // Get back to the typing box.                         A15: Run Shell [ Command:input text LOCATION_ACCURACY:%LOCACC Timeout                                 (Seconds):0 Use Root:On Store Result In: ]                         A16: Dpad [ Button:Right Repeat Times:1 ]                         A17: Dpad [ Button:Press Repeat Times:1 ]                         A18: Dpad [ Button:Left Repeat Times:1 ]                         A19: Run Shell [ Command:input text BATTERY_LEVEL:%BATT% Timeout // I am adding Battery level in my case as well.                                 (Seconds):0 Use Root:On Store Result In: ]                         A20: Dpad [ Button:Right Repeat Times:1 ]                         A21: Dpad [ Button:Press Repeat Times:1 ]                         A22: Variable Set [ Name:%WHATSAPP_LASTREQ To:%WHATSAPP_CURRREQ Do // And now, we say, request is done.                                 Maths:Off Append:Off ]                         A23: Button [ Button:Back ] // I am exiting the WhatsApp nicely and not killing it. If you are the murderer kind, kill it, just know, you don’t have any place in the heaven.                         A24: Button [ Button:Back ]                         A25: Notify Cancel [ Title: Warn Not Exist:Off ] // Remove the permanent notification.                         A26: Notify [ Title:WhatsApp location request Text:Location sent // Make a temporary notification, and say, location is sent.                                 successfully. Icon:<icon> Number:0 Permanent:Off Priority:3 ]                                                         A27: Secure Settings [ Configuration:GPS Disabled // Disable all the horrible things we turned on earlier.                                 Package:com.intangibleobject.securesettings.plugin Name:Secure                                 Settings ]                         A28: Secure Settings [ Configuration:Pattern Lock Enabled                                 Package:com.intangibleobject.securesettings.plugin Name:Secure                                 Settings ]                         A29: Secure Settings [ Configuration:Keyguard Enabled                                 Package:com.intangibleobject.securesettings.plugin Name:Secure                                 Settings ]                 A30: End If         A31: End If Download this Task from here: http://db.tt/9vRmbhyb That’s it in the above small example – you can read/write messages from/to WhatsApp app. I am using n7000-cm9.1-cwr6. Oh yea, and if you are having the Talkback auto enabled for Chrome browser, you need to turn Off the Web scripts to run. Tasker is amazing, I have automated a lot of tasks using this tool. I will share a few none generic ones with you in my coming post here.

  Read the article

• Pet Peeves with the Windows Phone 7 Marketplace

  - by Bil Simser

  Have you ever noticed how something things just gnaw at your very being. This is the case with the WP7 marketplace, the Zune software, and the things that drive me batshit crazy with a side of fries. To go. I wanted to share. XBox Live is Not the Centre of the Universe Okay, it’s fine that the Zune software has an XBox live tag for games so can see them clearly but do we really need to have it shoved down our throats. On every click? Click on Games in the marketplace: The first thing that it defaults to on the filters on the right is XBox Live: Okay. Fine. However if you change it (say to Paid) then click onto a title when you come back from that title is the filter still set to Paid? No. It’s back to XBox Live again. Really? Give us a break. If you change to any filter on any other genre then click on the selected title, it doesn’t revert back to anything. It stays on the selection you picked. Let’s be fair here. The Games genre should behave just like every other one. If I pick Paid then when I come back to the list please remember that. Double Dipping On the subject of XBox Live titles, Microsoft (and developers who have an agreement with Microsoft to produce Live titles, which generally rules out indie game developers) is double dipping with regards to exposure of their titles. Here’s the Puzzle and Trivia Game section on the Marketplace for XBox Live titles: And here’s the same category filtered on Paid titles: See the problem? Two indie titles while the rest are XBox Live ones. So while XBL has it’s filter, they also get to showcase their wares in the Paid and Free filters as well. If you’re going to have an XBox Live filter then use it and stop pushing down indie titles until they’re off the screen (on some genres this is already the case). Free and Paid titles should be just that and not include XBox Live ones. If you’re really stoked that people can’t find the Free XBox Live titles vs. the paid ones, then create a Free XBox Live filter and a Paid XBox Live filter. I don’t think we would mind much. Whose Trial is it Anyways? You might notice apps in the marketplace with titles like “My Fart App Professional Lite” or “Silicon Lamb Spleen Builder Free”. When you submit and app to the marketplace it can either be free or paid. If it’s a paid app you also have the option to submit it with Trial capabilities. It’s up to you to decide what you offer in the trial version but trial versions can be purchased from within the app so after someone trys out your app (for free) and wants to unlock the Super Secret Obama Spy Ring Level, they can just go to the marketplace from your app (if you built that functionality in) and upgrade to the paid version. However it creates a rift of sorts when it comes to visibility. Some developers go the route of the paid app with a trial version, others decide to submit *two* apps instead of one. One app is the “Free” or “Lite” verions and the other is the paid version. Why go to the hassle of submitting two apps when you can just create a trial version in the same app? Again, visibility. There’s no way to tell Paid apps with Trial versions and ones without (it’s an option, you don’t have to provide trial versions, although I think it’s a good idea). However there is a way to see the Free apps from the Paid ones so some submit the two apps and have the Free version have links to buy the paid one (again through the Marketplace tasks in the API). What we as developers need for visibility is a new filter. Trial. That’s it. It would simply filter on Paid apps that have trial capabilities and surface up those apps just like the free ones. If Microsoft added this filter to the marketplace, it would eliminate the need for people to submit their “Free” and “Lite” versions and make it easier for the developer not to have to maintain two systems. I mean, is it really that hard? Can’t be any more difficult than the XBox Live Filter that’s already there. Location is Everything The last thing on my bucket list is about location. When I launch Zune I’m running in my native location setting, Canada. What’s great is that I navigate to the Travel Tools section where I have one of my apps and behold the splendour that I see: There are my apps in the number 1 and number 4 slot for top selling in that category. I show it to my wife to make up for the sleepless nights writing this stuff and we dance around and celebrate. Then I change my location on my operation system to United States and re-launch Zune. WTF? My flight app has slipped to the 10th spot (I’m only showing 4 across here out of the 7 in Zune) and my border check app that was #1 is now in the 32nd spot! End of celebration. Not only is relevance being looked at here, I value the comments people make on may apps as do most developers. I want to respond to them and show them that I’m listening. The next version of my border app will provide multiple camera angles. However when I’m running in my native Canada location, I only see two reviews. Changing over to United States I see fourteen! While there are tools out there to provide with you a unified view, I shouldn’t have to rely on them. My own Zune desktop software should allow me to see everything. I realize that some developers will submit an app and only target it for some locations and that’s their choice. However I shouldn’t have to jump through hoops to see what apps are ahead of mine, or see people comments and ratings. Another proposal. Either unify the marketplace (i.e. when I’m looking at it show me everything combined) or let me choose a filter. I think the first option might be difficult as you’re trying to average out top selling apps across all markets and have to deal with some apps that have been omitted from some markets. Although I think you could come up with a set of use cases that would handle that, maybe that’s too much work. At the very least, let us developers view the markets in a drop down or something from within the Zune desktop. Having to shut down Zune, change our location, and re-launch Zune to see other perspectives is just too onerous. A Call to Action These are just one mans opinion. Do you agree? Disagree? Feel hungry for a bacon sandwich? Let everyone know via the comments below. Perhaps someone from Microsoft will be reading and take some of these ideas under advisement. Maybe not, but at least let’s get the word out that we really want to see some change. Egypt can do it, why not WP7 developers!

  Read the article

• Windows Phone Developer Spotlight: Nikolai Joukov

  - by Lori Lalonde

  Originally posted on: http://geekswithblogs.net/lorilalonde/archive/2014/06/04/windows-phone-developer-spotlight-nikolai-joukov.aspxAs part of an ongoing series, I plan to include a spotlight post on people within the community that are stars in their field and area of expertise. For my first spotlight post, I interviewed Nikolai Joukov, who is a regular attendee at my local area .NET User Group (CTTDNUG), and has also participated in many of the Mobile and Cloud workshops we have hosted over the past few years. Nikolai stood out immediately, because of his passion for developing mobile apps, his interest in continuous learning, and his drive to publish quality apps that people will find useful and entertaining. Background: Nikolai immigrated to Canada in 1995, and has been working in IT since 1997. He moved on to become an independent contractor in 2005, and has worked at various large scale organizations over the course of his career, including BMO, Enbridge, Economical Insurance, Equitable Life, Manulife and Sun Life. Nikolai is an accomplished Windows Phone and Windows Store publisher, with 11 published Windows Phone apps, and 8 published Windows Store apps. He has almost 6000 downloads and favourable reviews. Q & A with Nikolai How many years have you been developing Windows Phone apps? 2 years When did you develop your very first Windows Phone app, and what was it about? Actually, the very first app I wrote was for the Microsoft “Smart Phone” back in 2004. This phone was given to me by Microsoft during the Developers Days Conference in Toronto. It was some kind of experimental model named Smart Phone, but you had to use VB 3 to develop the applications. Needless to say, this was not very successful at that time. My app was a Stock Trades Calculator. Very primitive, but it was working for me. The phone was heavy and the battery barely lasted 4 hours. Microsoft stopped supporting it few months later and the phone stopped working shortly after, but I still have it as a souvenir. For Windows Phone, my first app was “Trip Packing Assistant”. This is a simple trip packing check list that allows you to list items by category, set required quantity of items, and mark off the item in the list when it is packed. I designed it for me and my wife Galina, since we love to travel and this program helps manage our list for us. How did you get started in Windows Phone development? I have to say thanks to our .NET User Group for introducing me to Windows Phone development. I was intrigued and decided to give it a try. In October 2012 during a 2 day training event that ObjectSharp hosted in London, I met Bruce Johnson. On his advice, I registered for Developer Movement, and it is was a good push to actually complete the apps that I started. You have a great series of travel guide apps both for Windows Phone and Windows Store. Tell us about how you came up with the idea to develop those apps and what process you went through to put it all together. Like I said earlier, my wife and I love to travel. Before I created Trip Packing Assistant, every time we were planning to travel somewhere new, Galina would spend 3-4 weeks doing research. She would create a Word document with all of the information. We didn’t want to have to carry our laptop with us all the time, so we printed out the Word document she created, and would take it with us. After we returned from the trip, we would bring back tons of pictures and materials. Then our friends started to ask us about our materials before they planned their trips to the same places we had visited. So I decided to give it a try and started making apps for Windows Phone and for Windows 8. I hope these applications will help people who are planning to travel. So, all of the pictures used in the travel apps you created were actually taken by you during these amazing trips? Yes Do you have another Windows Store/Windows Phone project in development right now? If so, can you give us a hint at what it will be about? I want to stay with travel apps for now. But this time I will try to write an app for us (Galina and I). Usually we go on the trip, then I write the apps after we have all this beautiful pictures in our hands. We are planning a trip to Rome. This app will not have the pictures, but I want to add a map with points of interest and all information that can be useful for us. Then we will go on our trip and test it on location. As well I am planning to work on my existing apps to make them better. What learning resources would you recommend for other developers that want to get started in Window Store and Windows Phone development? I would start with dev.windowsphone.com to get all tools and samples, also links to training materials. I like MVA (Microsoft Virtual Academy). Their videos are really useful and it is free. Pluralsight is good too but it is not free and I do not have a subscription anymore. Our .NET User Group meetings give good insights too. I went to all meetings and full day training events. When you start to develop your app, you need to do research for specific questions that arise during development. The Developer Portal and Nokia Developer are good resources too. Wrap Up Thanks Nikolai for participating in my first Spotlight blog post! Shown below is Nikolai’s publisher page in the Windows Phone Store and his publisher page in the Windows Store. Simply click on it to be taken to there to check out his portfolio of apps. Be sure to download his apps and try them out! They are all free! Nikolai’s Windows Phone apps   Nikolai’s Windows Store Apps

  Read the article

• Using SSIS to send a HTML E-Mail Message with built-in table of Counts.

  - by Kevin Shyr

  For the record, this can be just as easily done with a .NET class with a DLL call.  The two major reasons for this ending up as a SSIS package are: There are a lot of SQL resources for maintenance, but not as many .NET developers. There is an existing automated process that links up SQL Jobs (more on that in the next post), and this is part of that process.   To start, this is what the SSIS looks like: The first part of the control flow is just for the override scenario.   In the Execute SQL Task, it calls a stored procedure, which already formats the result into XML by using "FOR XML PATH('Row'), ROOT(N'FieldingCounts')".  The result XML string looks like this: <FieldingCounts>   <Row>     <CellId>M COD</CellId>     <Mailed>64</Mailed>     <ReMailed>210</ReMailed>     <TotalMail>274</TotalMail>     <EMailed>233</EMailed>     <TotalSent>297</TotalSent>   </Row>   <Row>     <CellId>M National</CellId>     <Mailed>11</Mailed>     <ReMailed>59</ReMailed>     <TotalMail>70</TotalMail>     <EMailed>90</EMailed>     <TotalSent>101</TotalSent>   </Row>   <Row>     <CellId>U COD</CellId>     <Mailed>91</Mailed>     <ReMailed>238</ReMailed>     <TotalMail>329</TotalMail>     <EMailed>291</EMailed>     <TotalSent>382</TotalSent>   </Row>   <Row>     <CellId>U National</CellId>     <Mailed>63</Mailed>     <ReMailed>286</ReMailed>     <TotalMail>349</TotalMail>     <EMailed>374</EMailed>     <TotalSent>437</TotalSent>   </Row> </FieldingCounts>  This result is saved into an internal SSIS variable with the following settings on the General tab and the Result Set tab:   Now comes the trickier part.  We need to use the XML Task to format the XML string result into an HTML table, and I used Direct input XSLT And here is the code of XSLT: <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:output method="html" indent="yes"/>   <xsl:template match="/ROOT">         <table border="1" cellpadding="6">           <tr>             <td></td>             <td>Mailed</td>             <td>Re-mailed</td>             <td>Total Mail (Mailed, Re-mailed)</td>             <td>E-mailed</td>             <td>Total Sent (Mailed, E-mailed)</td>           </tr>           <xsl:for-each select="FieldingCounts/Row">             <tr>               <xsl:for-each select="./*">                 <td>                   <xsl:value-of select="." />                 </td>               </xsl:for-each>             </tr>           </xsl:for-each>         </table>   </xsl:template> </xsl:stylesheet>    Then a script task is used to send out an HTML email (as we are all painfully aware that SSIS Send Mail Task only sends plain text) Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 using System; using System.Data; using Microsoft.SqlServer.Dts.Runtime; using System.Windows.Forms; using System.Net.Mail; using System.Net;   namespace ST_b829a2615e714bcfb55db0ce97be3901.csproj {     [System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]     public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase     {           #region VSTA generated code         enum ScriptResults         {             Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,             Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure         };         #endregion           public void Main()         {             String EmailMsgBody = String.Format("<HTML><BODY><P>{0}</P><P>{1}</P></BODY></HTML>"                                                 , Dts.Variables["Config_SMTP_MessageSourceText"].Value.ToString()                                                 , Dts.Variables["InternalStr_CountResultAfterXSLT"].Value.ToString());             MailMessage EmailCountMsg = new MailMessage(Dts.Variables["Config_SMTP_From"].Value.ToString().Replace(";", ",")                                                         , Dts.Variables["Config_SMTP_Success_To"].Value.ToString().Replace(";", ",")                                                         , Dts.Variables["Config_SMTP_SubjectLinePrefix"].Value.ToString() + " " + Dts.Variables["InternalStr_FieldingDate"].Value.ToString()                                                         , EmailMsgBody);             //EmailCountMsg.From.             EmailCountMsg.CC.Add(Dts.Variables["Config_SMTP_Success_CC"].Value.ToString().Replace(";", ","));             EmailCountMsg.IsBodyHtml = true;               SmtpClient SMTPForCount = new SmtpClient(Dts.Variables["Config_SMTP_ServerAddress"].Value.ToString());             SMTPForCount.Credentials = CredentialCache.DefaultNetworkCredentials;               SMTPForCount.Send(EmailCountMsg);               Dts.TaskResult = (int)ScriptResults.Success;         }     } } Note on this code: notice the email list has Replace(";", ",").  This is only here because the list is configurable in the SQL Job Step at Set Values, which does not react well with colons as email separator, but system.Net.Mail only handles comma as email separator, hence the extra replace in the string. The result is a nicely formatted email message with count information:

  Read the article

< Previous Page | 638 639 640 641 642 643 644 645 646 647 648 649  | Next Page >