Search Results

Search found 19480 results on 780 pages for 'do your own homework'.

Page 643/780 | < Previous Page | 639 640 641 642 643 644 645 646 647 648 649 650  | Next Page >

• How can I run an app's source code that I got from the Android source code?

  - by Wesley

  For all of you android devs out there that have the Android simulator running on your comp, you know that there are a few built in apps that are already 'installed' on your phone. I had an idea for an app that would utilize a function that is already being done in the spare parts app. I went on to the android developer site, dug through the source code files, and found the spare parts app, and am now trying to set it up so that running it from eclipse on my machine actually runs the app in the simulator. In other words, I want to be able to make changes to and adjust some of the things in that app for my own needs. But it won't compile, because of a number of different errors. How do I get that source code running on my local machine? Is there some special trick that I just dont know about? I thought that if I could get the source code than the rest would be easy, but it isn't being too easy. Any help here would be appreciated!!

  Read the article

• What .NET reporting tools are best for dynamic report generation?

  - by bvanderw

  Perhaps I need to define "dynamic generation". By this I mean using graphics primitives to draw on the page (such as DrawText or DrawLine, etc) This is what System.Drawing.Printing provides. I often need to create forms and reports for Windows applications that either require dynamic generation or where I need control over the formatting that stretches or goes beyond the capabilities of most report designers. Essentially, I need to ability to create my own pages using graphics primitives like you can do with System.Drawing.Printing that are part of package that also provides a report designer, exporting to PDF, etc. In my Delphi days, I used Rave Reports (along with the exporting add-ons from Gnostice) because it was the only Delphi reporting tool that gave you that kind of fine control. I've been struggling with the reporting tools provided by Developer Express and I have given up trying to make them do what I need to do. I downloaded a trial of ActiveReports and was able to completely create one of my dynamic reports (using their Page class) in a few hours one afternoon. It's likely I will buy their product, but it's a bit frustrating to have to do so after investing in the Developer Express tools. Before I do so, are there any other products that offer this functionality that I should investigate? As far as I can tell, Crystal Reports does not - is this correct? Thanks.... --Bruce

  Read the article

• Winsock WSAAsyncSelect sending without an infinite buffer

  - by Xexr

  Hi, This is more of a design question than a specific code question, I'm sure I am missing the obvious, I just need another set of eyes. I am writing a multi-client server based on WSAAsyncSelect, each connection is made into an object of a connection class I have written which contains associated settings and buffers etc. My question concerns FD_WRITE, I understand how it operates: One FD_WRITE is sent immediately after a connection is established. Thereafter, you should send until WSAEWOULDBLOCK is received at which point you store what is left to send in a buffer, and wait to be told that it is ok to send again. This is where I have a problem, how large do I make this holding buffer within each connections object? The amount of time until a new FD_WRITE is received is unknown, I could be attempting to send a lot of stuff during this period, all the time adding to my outgoing buffer. If I make the buffer dynamic, memory usage could spiral out of control if for whatever reason, I am unable to send() and reduce the buffer. So my question is how do you generally handle this situation? Note I am not talking about the network buffer itself which winsock uses, but one of my own creation used to "queue" up sends. Hope I explained that well enough, thanks all!

  Read the article

• Flex 4 front end connecting to Java Jersey Web Service

  - by user305801

  I created a Java REST service using Jersey. I use three of the HTTP "verbs" GET, POST and DELETE. I want to create several prototype front ends for the service. After much research, a lot dating to 2008 and 2009, I have been unable to find anything remotely simple. My three options are: 1) resthttpservice. This project hasn't been updated in a year. The only activity are one off suggestions that individual users have implemented. http://code.google.com/p/resthttpservice/ 2) Create an AIR application. This isn't unfeasible. 3) Writing my own socket level code but there is a security restriction with flash players and I need to implement a policy server. I have already read the question posted about asking whether using Flex for REST services were worth it. That information is old as well. I want to introduce REST services to my company but Flex's limited support for HTTP PUT and DELETE are discouraging. My service also uses the Accept header to determine if JSON or XML will be returned to the client. I can't seem to change HTTP headers without doing socket programming. I'm fine with that but the security policy thing is annoying. Is there an easy way to use Flex 4 with RESTful services that uses PUT/DELETE and the Accept HTTP header? Please help. I'm very frustrated.

  Read the article

• Windows Azure - access webrole local storage from separate workerrole

  - by Brett Smith

  I'm running an application on windows azure, the MVC views need to be dynamic, I started by storing them as records in the database, but am quite keen to move them to a physical location. My concept was to create the physical file via code... which worked great and speeds up the page load dramatically. This was of course before I realised that the files were only available for the duration of the role Next I looked at a start up task to create the files when the role was started - however I then realised that any separate instances weren't going to sync up unless I monitored the database for changes. So I moved from a start up task to a function in the run method of the role that checks the database every 10 minutes to see if changes have occurred. The problem is that this seems to choke up the application (at least in the warm up stage). Ideally I would like to move the run function to it's own worker role that can sit there and push files out to web role instances, but I'm unsure on how I would go about accessing the web roles local storage from the worker role. Can anybody tell me whether this is actually possible? and hopefully point me in the right direction to achieve this? Just to clarify what I'm trying to achieve -View is created in user interface running on web role and stored in database -Separate web role (front end) has clientside application with virtualpath provider pointing Views requests to local storage (localresource) -separate worker role to create View structure and load this into clientside web role local storage

  Read the article

• General String Encryption in .NET

  - by cryptospin

  I am looking for a general string encryption class in .NET. (Not to be confused with the 'SecureString' class.) I have started to come up with my own class, but thought there must be a .NET class that already allows you to encrypt/decrypt strings of any encoding with any Cryptographic Service Provider. Public Class SecureString Private key() As Byte Private iv() As Byte Private m_SecureString As String Public ReadOnly Property Encrypted() As String Get Return m_SecureString End Get End Property Public ReadOnly Property Decrypted() As String Get Return Decrypt(m_SecureString) End Get End Property Public Sub New(ByVal StringToSecure As String) If StringToSecure Is Nothing Then StringToSecure = "" m_SecureString = Encrypt(StringToSecure) End Sub Private Function Encrypt(ByVal StringToEncrypt As String) As String Dim result As String = "" Dim bytes() As Byte = Text.Encoding.UTF8.GetBytes(StringToEncrypt) Using provider As New AesCryptoServiceProvider() With provider .Mode = CipherMode.CBC .GenerateKey() .GenerateIV() key = .Key iv = .IV End With Using ms As New IO.MemoryStream Using cs As New CryptoStream(ms, provider.CreateEncryptor(), CryptoStreamMode.Write) cs.Write(bytes, 0, bytes.Length) cs.FlushFinalBlock() End Using result = Convert.ToBase64String(ms.ToArray()) End Using End Using Return result End Function Private Function Decrypt(ByVal StringToDecrypt As String) As String Dim result As String = "" Dim bytes() As Byte = Convert.FromBase64String(StringToDecrypt) Using provider As New AesCryptoServiceProvider() Using ms As New IO.MemoryStream Using cs As New CryptoStream(ms, provider.CreateDecryptor(key, iv), CryptoStreamMode.Write) cs.Write(bytes, 0, bytes.Length) cs.FlushFinalBlock() End Using result = Text.Encoding.UTF8.GetString(ms.ToArray()) End Using End Using Return result End Function End Class

  Read the article

• Importing data from third party datasource (open architecture design )

  - by mare

  How would you design an application (classes, interfaces in class library) in .NET when we have a fixed database design on our side and we need to support imports of data from third party data sources, which will most likely be in XML? For instance, let us say we have a Products table in our DB which has columns Id Title Description TaxLevel Price and on the other side we have for instance Products: ProductId ProdTitle Text BasicPrice Quantity. Currently I do it like this: Have the third party XML convert to classes and XSD's and then deserialize its contents into strong typed objects (what we get as a result of this process is classes like ThirdPartyProduct, ThirdPartyClassification, etc.). Then I have methods like this: InsertProduct(ThirdPartyProduct newproduct) I do not use interfaces at the moment but I would like them to. What I would like is implement something like public class Contoso_ProductSynchronization : ProductSynchronization InsertProduct(ContosoProduct p) where ProductSynchronization will be an interface or abstract class. There will most likely be many implementations of ProductSynchronization. I cannot hardcode the types - classes like ContosoProduct, NorthwindProduct might be created from the third party XML's (so preferably I would continue to use deserialization). Hopefully someone will understand what I'm trying to explain here. Just imagine you are the seller and you have numerous providers and each one uses their own proprietary XML format. I don't mind the development, which will of course be needed everytime new format appears, because it will only require 10-20 methods to be implemented, I just want the architecture to be open and support that.

  Read the article

• WM_NOTIFY and superclass chaining issue in Win32

  - by DasMonkeyman

  For reference I'm using the window superclass method outlined in this article. The specific issue occurs if I want to handle WM_NOTIFY messages (i.e. for custom drawing) from the base control in the superclass I either need to reflect them back from the parent window or set my own window as the parent (passed inside CREATESTRUCT for WM_(NC)CREATE to the base class). This method works fine if I have a single superclass. If I superclass my superclass then I run into a problem. Now 3 WindowProcs are operating in the same HWND, and when I reflect WM_NOTIFY messages (or have them sent to myself from the parent trick above) they always go to the outermost (most derived) WindowProc. I have no way to tell if they're messages intended for the inner superclass (base messages are supposed to go to the first superclass) or messages intended for the outer superclass (messages from the inner superclass are intended for the outer superclass). These messages are indistinguishable because they all come from the same HWND with the same control ID. Is there any way to resolve this without creating a new window to encapsulate each level of inheritance? Sorry about the wall of text. It's a difficult concept to explain. Here's a diagram. single superclass: SuperA::WindowProc() - Base::WindowProc()---\ ^--------WM_NOTIFY(Base)--------/ superclass of a superclass: SuperB::WindowProc() - SuperA::WindowProc() - Base::WindowProc()---\ ^--------WM_NOTIFY(Base)--------+-----------------------/ ^--------WM_NOTIFY(A)-----------/ The WM_NOTIFY messages in the second case all come from the same HWND and control ID, so I cannot distinguish between the messages intended for SuperA (from Base) and messages intended for SuperB (from SuperA). Any ideas?

  Read the article

• Django Development Environment Setup Questions

  - by Ross Peoples

  Hello, I'm trying to set up a good development environment for a Django project that I will be working on from two different physical locations. I have two Mac machines, one at home and one at work that I do most of my development on. I currently host a Ubuntu virtual machine on one of the machines to host the Django environemnt, install DropBox on it, and edit source code from my Mac. When I save the code file, the changes get synced over DropBox to the Ubuntu VM and the Django development server automatically restarts because of the change. This method has worked well in the past, but I am starting to use DropBox for a lot of other things now and don't want all of that to be downloaded on every virtual machine I use. Plus, I want to start using Eclipse + PyDev to be able to debug code and have code completion. Currently, I use TextEdit which is great, but doesn't support debugging or completion. So what are my options? I thought about setting up a Parallels VM on a thumb drive that has my entire environment on it (Eclipse included), but that has its own problems. Any other thoughts?

  Read the article

• Hudson Maven build fails using workspace POM, works when pointing to development copy

  - by Deejay

  I'm developing a series of web applications using Eclipse IDE, Maven, SVN, and Hudson for CI. When I specify the "Root POM" option in my Hudson job to be the copy of pom.xml in its workspace directory, the build fails citing compilation failure due to missing classpath entries. [ERROR] BUILD FAILURE [INFO] ------------------------------------------------------------------------ [INFO] Compilation failure C:\Users\djones\.hudson\jobs\Store\workspace\trunk\src\main\java\com\app\store\model\User.java:[24,42] package org.hibernate.validator.constraints does not exist C:\Users\djones\.hudson\jobs\Store\workspace\trunk\src\main\java\com\app\store\dao\UserGroupHibernateSupportDao.java:[8,20] package org.hibernate does not exist C:\Users\djones\.hudson\jobs\Store\workspace\trunk\src\main\java\com\app\store\dao\UserGroupHibernateSupportDao.java:[10,49] package org.springframework.orm.hibernate3.support does not exist When I specify the "Root POM" to be the copy of pom.xml in my Eclipse workspace, it builds just fine. It builds fine from Eclipse too. I want to move Hudson over to a separate machine so several developers can use it, so I can't very well point to my own development workspace to give it a POM. If I try putting an SVN URL in the "root pom.xml" option, it says file not found. What should I be entering here for a project worked on by several developers, and hosted in an SVN repository?

  Read the article

• How did your team customize Stylecop (and perhaps other tools) for .Net for a good result?

  - by Hamish Grubijan

  Our team is still in a love / hate relationship with it. I am hoping to put an end to the debate by having an internal vote on what rules should be excluded and which rules should be added. Before doing so, I wanted to ask others SO users. To standardize (but not limit) the responses: What is your current StyleCop version? What .Net version do you currently target? Which default rules did you turn off? Which non-default rules have you turned on? Have you coded your own rules? Please describe. Do you have any other StyleCop tricks worth sharing? Do you use Resharper? What version? Is it a good bang for the buck? Do you use any other tools for .Net / C++ which integrate with Visual Studio and aid development? Did you get your money's worth? Anything else you like to add? ... Thank you!

  Read the article

• rename an html page according to an image within it

  - by Jake

  Hi, firstly I'll give some background regarding the situation. I have a website containing approximately 56k pages each page contain a mapped sketch of a machine part. this machine part is made out of smaller parts which are outlined in the image and hold a certain number. when you hover over the numbers a box with the part item code shows up. I order parts according to this item codes but recently a lot of the items codes have changed, therefore I am looking for a solution. now I own a database with data on all the 56k parts and I want to link the relevant webpage to each record according to the name of the part(a column in my database), the problem is that the webpages names has no logic name that could connect with the part name in any way but the image that is displayed in the page has the exact name of the part. I want to rename all the html files I has according to the Images displayed within them. how can I achieve that without renaming all the 56k pages manually? additionally how can I add the links to all the 56k pages automatically to my database after all the above is done? Thank you for your patience I know it was long.

  Read the article

• What is the best way to store site configuration data?

  - by DaveDev

  I have a question about storing site configuration data. We have a platform for web applications. The idea is that different clients can have their data hosted and displayed on their own site which sits on top of this platform. Each site has a configuration which determines which panels relevant to the client appear on which pages. The system was originally designed to keep all the configuration data for each site in a database. When the site is loaded all the configuration data is loaded into a SiteConfiguration object, and the clients panels are generated based on the content of this object. This works, but I find it very difficult to work with to apply change requests or add new sites because there is so much data to sift through and it's difficult maintain a mental model of the site and its configuration. Recently I've been tasked with developing a subset of some of the sites to be generated as PDF documents for printing. I decided to take a different approach to how I would define the configuration in that instead of storing configuration data in the database, I wrote XML files to contain the data. I find it much easier to work with because instead of reading meaningless rows of data which are related to other meaningless rows of data, I have meaningful documents with semantic, readable information with the relationships defined by visually understandable element nesting. So now with these 2 approaches to storing site configuration data, I'd like to get the opinions of people more experienced in dealing with this issue on dealing with these two approaches. What is the best way of storing site configuration data? Is there a better way than the two ways I outlined here? note: StackOverflow is telling me the question appears to be subjective and is likely to be closed. I'm not trying to be subjective. I'd like to know how best to approach this issue next time and if people with industry experience on this could provide some input.

  Read the article

• Need to calculate rotation-vector from Sensor.TYPE_ORIENTATION data

  - by Sponge

  I need to calculate a rotation vector out of the data i get from Sensor.TYPE_ORIENTATION. The sensor data is defined like this: the values have to be recalculated to become a correct 3d position: values[0]: Azimuth, angle between the magnetic north direction and the Y axis, around the Z axis (0 to 359). 0=North, 90=East, 180=South, 270=West values[1]: Pitch, rotation around X axis (-180 to 180), with positive values when the z-axis moves toward the y-axis. values[2]: Roll, rotation around Y axis (-90 to 90), with positive values when the x-axis moves away from the z-axis I need all three values like the Z axis value (from 0 to 360 degree). I tried a lot but cant figure out how to do this :/ i also tried to use Sensor.TYPE_ACCELEROMETER and Sensor.TYPE_MAGNETIC_FIELD to calculate this 3d vector on my own. here is the code: final float[] inR = new float[16]; // load inR matrix from current sensor data: SensorManager.getRotationMatrix(inR, null, gravityValues, geomagneticValues); float[] orientation = new float[3]; SensorManager.getOrientation(inR, orientation); mapMagAndAcclDataToVector(orientation); //here i do some *360 stuff orientetionChanged(orientation); //then the correct values are passed (in theorie) But this didn't work and i think it is much to complicated. So i bet there is a simple solution how to recalc the values of ensor.TYPE_ORIENTATION to make them a 3d rotation vector, but i just dont know how to do it. If you know the answer please tell me.

  Read the article

• How to jQuery plugin effects to items created later in the DOM

  - by Dan Denney

  How do I apply jQuery plugin effects to items that are created by an event? So, what I am attempting to do is have all uls throughout a site use the jquery.scroll.js plugin for styling. I currently have it working on all active uls. However, there are some category/subcategory sections. I am still new to writing any jQuery on my own and there is a leap in logic that I don't understand on applying plugins to items when they are loaded later. In the real example, users click a category from a ul and a sub category is loaded via Rails and JSON. For a light sample, I made a jsfiddle that simulates the issue that I run into. The category ul is styled correctly, but the subcategory ul doesn't pick up the styling. I'm hoping for some assistance not just in whipping up some code to fix it, but in pointing me in the direction of what I need to learn for this functionality. http://jsfiddle.net/dandenney/25R8F/1/ Thank you in advance!

  Read the article

• Cannot clear the form after Submit using the Validation plugin in jQuery

  - by novellino

  Hello, I an quite new to jQuery and I have a problem while trying to create a form. I am using the Validation plugin for validate the email (one the form's field). When I click the Submit button I want to call my own function because I want to save the data in an XML file. This is my button: (as I understood the plugin uses "submit" for understand the button) <input type="submit" name="submit" class="submit" id="submit_btn" value="Send"/> and here is the script for the validation: <script type="text/javascript"> $(document).ready(function() { //this is my form $("#contactForm").validate(); /*save the valid data in the xml*/ $(".submit").click(function() { var email = $("input#email").val(); var subject = $("input#subject").val(); var message = $("textarea#message").val(); if (email == "" || !$("#contactForm").valid()) { return false; } var dataString = 'email='+ email + '&subject=' + subject + '&message=' + message; //alert("DATA: " +dataString); $.ajax({ type: "POST", url: "SaveData.jsp", data: dataString, success: function(data){} }); return false; }); }); </script> In general it works ok but I have two basic problems. When I click the button in the beginning having all the form empty, I get no message for the field required. Also when the data are valid and I am doing the submit, the form does not become clear after the submit. If I deleted this script code, these actions are working properly but I can not save the data! Does anyone know what is wrong? Thanks a lot!

  Read the article

• UIScrollView loading an image

  - by treasure

  i must say i m not very good at this. and you probably know that (cause noone bothers to answer my questions) but i will keep on trying!!! lol here it goes! i wanted to find an "easy" way to use the pinch/zoom function on my app! so i decided to use a UIScrollView. so far so good. i load my image from an sqlite db like so: - (void)loadView { self.title = @"ScrollView"; imageView = [[UIImageView alloc] initWithFrame:[UIScreen mainScreen].applicationFrame]; imageView.autoresizingMask = UIViewAutoresizingFlexibleHeight | UIViewAutoresizingFlexibleWidth; imageView.contentMode = UIViewContentModeScaleAspectFit; imageView.backgroundColor = [UIColor blackColor]; self.view = imageView;} and - (void)viewWillAppear:(BOOL)animated {imageView.image = entity.imageA} I followed a tutorial but i cnnot seem to be able to load my image at all: - (void)vieDidLoad { imageView = [[UIImageView alloc] initWithFrame:[UIScreen mainScreen].applicationFrame]; imageView.autoresizingMask = UIViewAutoresizingFlexibleHeight | UIViewAutoresizingFlexibleWidth; imageView.contentMode = UIViewContentModeScaleAspectFit; imageView.backgroundColor = [UIColor blackColor]; //when i have this it does load the image but when i cant load my own data!! /*UIImageView *tempImageView = [[UIImageView alloc] initWithImage:[UIImage imageWithData:[NSData dataWithContentsOfURL:[NSURL URLWithString:@"http://www.austinbull.com/clonemines.png"]]]]; [self setMyImage:tempImageView]; [tempImageView release];*/ myScrollView.contentSize = CGSizeMake(imageView.frame.size.width, imageView.frame.size.height); myScrollView.maximumZoomScale = 4.0; myScrollView.minimumZoomScale = 0.75; myScrollView.clipsToBounds = YES; myScrollView.delegate = self; [myScrollView addSubview:imageView]; self.view = scrollView; [window makeKeyAndVisible]; } (UIView *)viewForZoomingInScrollView:(UIScrollView *)scrollView { return myImage; } any help would be appreciated! thank you for your time!

  Read the article

• Best practice way to handle variable content margin?

  - by Aithne

  Ok, so a quick site that I am throwing together for a friend has about 20 static pages. Each one with a small amount of content. the div Container contains, well, the div Content, and the div Content contains, obviously, the content that changes on each page. Now, depending on the length of the content, I want a different margin at the top. The less content, then the larger the margin. Simply an aesthetic choice. For example, if the content almost fills the static sized container, there is less padding, but a 1 line page of content might be 1/3 of the way down the static container. Centering the content in the div wont do, as that creates too large of a margin. Whats the best way to handle this? A new class for each content with a different margin? A new Id, so that it is in its own special div positioned or margined differently? Inline css on each page to override the standard css for div Content? A differnt spacer div inside Container before Content on each page? Some sort of scripting along the lines of margin of Content = (ContainerHeight - ContentHeight) / 3? Whats the acceptable way of doing this? I don't want to get into bad habits.

  Read the article

• Thread-safe data structure design

  - by Inso Reiges

  Hello, I have to design a data structure that is to be used in a multi-threaded environment. The basic API is simple: insert element, remove element, retrieve element, check that element exists. The structure's implementation uses implicit locking to guarantee the atomicity of a single API call. After i implemented this it became apparent, that what i really need is atomicity across several API calls. For example if a caller needs to check the existence of an element before trying to insert it he can't do that atomically even if each single API call is atomic: if(!data_structure.exists(element)) { data_structure.insert(element); } The example is somewhat awkward, but the basic point is that we can't trust the result of "exists" call anymore after we return from atomic context (the generated assembly clearly shows a minor chance of context switch between the two calls). What i currently have in mind to solve this is exposing the lock through the data structure's public API. This way clients will have to explicitly lock things, but at least they won't have to create their own locks. Is there a better commonly-known solution to these kinds of problems? And as long as we're at it, can you advise some good literature on thread-safe design? EDIT: I have a better example. Suppose that element retrieval returns either a reference or a pointer to the stored element and not it's copy. How can a caller be protected to safely use this pointer\reference after the call returns? If you think that not returning copies is a problem, then think about deep copies, i.e. objects that should also copy another objects they point to internally. Thank you.

  Read the article

• What's the boost way to create a functor that binds out an argument

  - by Mordachai

  I have need for a function pointer that takes two arguments and returns a string. I would like to pass an adapter that wraps a function that takes one argument, and returns the string (i.e. discard one of the arguments). I can trivially build my own adapter, that takes the 2 arguments, calls the wrapped function passing just the one argument through. But I'd much rather have a simple way to create an adapter on the fly, if there is an easy way to do so in C++/boost? Here's some details to make this a bit more concrete: typedef boost::function<CString (int,int)> TooltipTextFn; class MyCtrl { public: MyCtrl(TooltipTextFn callback = boost::bind(&MyCtrl::GetCellText, this, _1, _2)) : m_callback(callback) { } // QUESTION: how to trivially wrapper GetRowText to conform to TooltipTextFn by just discarding _2 ?! void UseRowText() { m_callback = boost::bind(&MyCtrl::GetRowText, this, _1, ??); } private: CString GetCellText(int row, int column); CString GetRowText(int row); TooltipTextFn m_callback; } Obviously, I can supply a member that adapts GetRowText to take two arguments and only passes the first to GetRowText() itself. But is there already a boost binder / adapter that lets me do that?

  Read the article

• The OpenID Provider issued an assertion for an Identifier whose discovery information did not match

  - by Sohail

  I used sample code from DotNetOpenAuth.net to become my own OpenID Provider (OpenIDProviderWebForm) everything worked fine and I was able to test my OP against NerdDinner. now I want to customize the identifier like --- http://www.mydomain.com/user.aspx/Hash(Username+PrivateKey)~Username. everything works on OP side but on the NerdDinner application when the app tries to do HttpRequestInfo clientResponseInfo = new HttpRequestInfo("GET", auth, auth.PathAndQuery, headers, null); response = RelyingParty.GetResponse(clientResponseInfo); (you find these two lines of codes in AuthController.cs from NerdDinner) the response contains below error: The OpenID Provider issued an assertion for an Identifier whose discovery information did not match. Assertion endpoint info: ClaimedIdentifier: http://localhost:57571/user.aspx/76208371132EC7F7A37472C8B4CC2CC37A05B707~sohail ProviderLocalIdentifier: http://localhost:57571/user.aspx/76208371132EC7F7A37472C8B4CC2CC37A05B707~sohail ProviderEndpoint: http://localhost:57571/server.aspx OpenID version: 2.0 Service Type URIs: Discovered endpoint info: [ { ClaimedIdentifier: http://localhost:57571/user.aspx/EA467E35736AC22EB60C04C2E9D9594263B60ECB~sohail ProviderLocalIdentifier: http://localhost:57571/user.aspx/EA467E35736AC22EB60C04C2E9D9594263B60ECB~sohail ProviderEndpoint: http://localhost:57571/server.aspx OpenID version: 2.0 Service Type URIs: http://specs.openid.net/auth/2.0/signon http://openid.net/extensions/sreg/1.1 }, { ClaimedIdentifier: http://localhost:57571/user.aspx/EA467E35736AC22EB60C04C2E9D9594263B60ECB~sohail ProviderLocalIdentifier: http://localhost:57571/user.aspx/EA467E35736AC22EB60C04C2E9D9594263B60ECB~sohail ProviderEndpoint: http://localhost:57571/server.aspx OpenID version: 1.0 Service Type URIs: http://openid.net/signon/1.0 http://openid.net/extensions/sreg/1.1 }, ] anybody can help me please?

  Read the article

• c++ Mixing printf with wprintf (or cout with wcout)

  - by Bo Jensen

  I know you should not mix printing with printf,cout and wprintf,wcout, but have a hard time finding a good answer why and if it is possible to get round it. The problem is I use a external library that prints with printf and my own uses wcout. If I do a simple example it works fine, but from my full application it simply does not print the printf statements. If this is really a limitation, then there would be many libraries out there which can not work together with wide printing applications. Any insight on this is more than welcome. Update : I boiled it down to : #include <stdio.h> #include <stdlib.h> #include <iostream> #include <readline/readline.h> #include <readline/history.h> int main() { char *buf; std::wcout << std::endl; /* ADDING THIS LINE MAKES PRINTF VANISH!!! */ rl_bind_key('\t',rl_abort);//disable auto-complete while((buf = readline("my-command : "))!=NULL) { if (strcmp(buf,"quit")==0) break; std::wcout<<buf<< std::endl; if (buf[0]!=0) add_history(buf); } free(buf); return 0; } So I guess it might be a flushing problem, but it still looks strange to me, I have to check up on it.

  Read the article

• need help fixing unique key in rails. rails is adding id causing duplicate key

  - by railsnew

  I need some help in fixing the below issue. I had transaction blocks in my rails code like below: @sqlcontact = "INSERT INTO contacts (id,\"cid\", \"hphone\", mphone, provider, cemail, email, sms , mail, phone) VALUES ('"+@id1+"','" + @id1 + "', '"+ params[:hphone] + "', '"+params[:mphone]+ "', '" + params[:provider] + "', '" + params[:cemail]+ "', '" + @varemail+ "', '"+@varsms+ "', '"+ @varmail+"', '"+@varphone+"')" my app was deployed to heroku so I was advised by them to remove transaction blocks. So I changed the above to: @cont = Contact.new(:id => @id1, :cid => @id1, :hphone => params[:hphone], :mphone => params[:mphone], :provider => params[:provider], :cemail => params[:cemail], :email => @varemail, :sms => @varsms, :mail => @varmail, :phone => @varphone) @cont.save My app also already had data stored. Now the problem is that when I try to save a record ...I keep getting the error: duplicate key value violates unique constraint "contacts_pkey" The error also shows the sql query trying to insert data ...however, in that sql query i Do not see id value. As you can see from my code that I am passing the id. then why is rails not accepting it? does it always include its own sequential id? can I not overwrite the default rails magic? and if it does that...does it not look at data that is already in the DB?? I am really stuck here. What should I do? should I just go back to my transaction block

  Read the article

• How can I create/update an XML node that may or may not exist?

  - by ScottBai

  Is there a method available (i.e. without me creating my own recursive method), for a given xpath (or other method of identifying the hierarchical position) to create/update an XML node, where the node would be created if it does not exist? This would need to create the parent node if it does not exist as well. I do have an XSD which includes all possible nodes. i.e. Before: <employee> <name>John Smith</name> </employee> Would like to call something like this: CoolXmlUpdateMethod("/employee/address/city", "Los Angeles"); After: <employee> <name>John Smith</name> <address> <city>Los Angeles</city> </address> </employee> Or even a method to create a node, given an xpath, wherein it will recursively create the parent node(s) if they do not exist? As far as the application (if it matters), this is taking an existing XML doc that contains only populated nodes, and adding data to it from another system. The new data may or may not already have values populated in the source XML. Surely this is not an uncommon scenario?

  Read the article

• Good tools for keeping the content in test/staging/live environments synchronized

  - by David Stratton

  I'm looking for recommendations on automated folder synchronization tools to keep the content in our three environments synchronized automatically. Specifically, we have several applications where a user can upload content (via a File Upload page or a similar mechanism), such as images, pdf files, word documents, etc. In the past, we had the user doing this to our live server, and as a result, our test and staging servers had to be manually synchronized. Going forward, we will have them upload content to the staging server, and we would like some software to automatically copy the files off to the test and live servers EITHER on a scheduled basis OR as the files get uploaded. I was planning on writing my own component, and either set it up as a scheduled task, or use a FileSystemWatcher, but it occurred to me that this has probably already been done, and I might be better off with some sort of synchronization tool that already exists. On our web site, there are a limited number of folders that we want to keep synchronized. In these folders, it is an all or nothing - we want to make sure the folders are EXACT duplicates. This should make it fairly straightforward, and I would think that any software that can synchronize folders would be OK, except that we also would like the software to log changes. (This rules out simple BATCH files.) So I'm curious, if you have a similar environment, how did you solve the challenge of keeping everything synchronized. Are you aware of a tool that is reliable, and will meet our needs? If not, do you have a recommendation for something that will come close, or better yet, an open source solution where we can get the code and modify it as needed? (preferably .NET). Added Also, I DID google this first, but there are so many options, I am interested mostly in knowing what actually works well vs what they SAY works, which is why I'm asking here.

  Read the article

< Previous Page | 639 640 641 642 643 644 645 646 647 648 649 650  | Next Page >