Search Results

Search found 40212 results on 1609 pages for 'hardware id'.

Page 645/1609 | < Previous Page | 641 642 643 644 645 646 647 648 649 650 651 652  | Next Page >

• wifi not working hp dv4

  - by Blaze

  i get this output for sudo lshw -C network : *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 06 serial: 3c:4a:92:cd:63:98 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:3000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network DISABLED description: Wireless interface product: RT5390 [802.11 b/g/n 1T1R G-band PCI Express Single Chip] vendor: Ralink corp. physical id: 0 bus info: pci@0000:0a:00.0 logical name: wlan0 version: 00 serial: 90:00:4e:82:3c:5b width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=3.0.0-17-generic-pae firmware=0.34 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:c2500000-c250ffff i cant enable the wifi using the fn+f12 key.. its just stuck. In windows 7 it gets enabled when i press the same keys. but this happens after it gets booted up... i just want to use the wifi in anyway possible. can anybody help?

  Read the article

• What to Return with Async CRUD methods

  - by RualStorge

  While there is a similar question focused on Java, I've been in debates with utilizing Task objects. What's the best way to handle returns on CRUD methods (and similar)? Common returns we've seen over the years are: Void (no return unless there is an exception) Boolean (True on Success, False on Failure, exception on unhandled failure) Int or GUID (Return the newly created objects Id, 0 or null on failure, exception on unhandled failure) The updated Object (exception on failure) Result Object (Object that houses the manipulated object's ID, Boolean or status field to with success or failure indicated, Exception information if there was one, etc) The concern comes into play as we've started moving over to utilizing C# 5's Async functionality, and this brought the question up of how we should handle CRUD returns large-scale. In our systems we have a little of everything in regards to what we return, we want to make these returns standardized... Now the question is what is the recommended standard? Is there even a recommended standard yet? (I realize we need to decide our standard, but typically we do so by looking at best practices, see if it makes sense for us and go from there, but here we're not finding much to work with)

  Read the article

• Oracle Flashback Technology - Webcast 9th June 2010

  - by Alex Blyth

  Hi All Here are the details for webcast on Oracle Flashback Technologies on Wednesday (9th June 2010) beginning at 1.30pm (Sydney, Australia Time). The Oracle Database architecture leverages the unique technological advances in the area of database recovery due to human errors. Oracle Flashback Technology provides a set of new features to view and rewind data back and forth in time. The Flashback features offer the capability to query historical data, perform change analysis, and perform self-service repair to recover from logical corruptions while the database is online. With Oracle Flashback Technology, you can indeed undo the past! Oracle9i introduced Flashback Query to provide a simple, powerful and completely non-disruptive mechanism for recovering from human errors. It allows users to view the state of data at a point in time in the past without requiring any structural changes to the database. Oracle Database 10g extended the Flashback Technology to provide fast and easy recovery at the database, table, row, and transaction level. Flashback Technology revolutionizes recovery by operating just on the changed data. The time it takes to recover the error is now equal to the same amount of time it took to make the mistake. Oracle 10g Flashback Technologies includes Flashback Database, Flashback Table, Flashback Drop, Flashback Versions Query, and Flashback Transaction Query. Flashback technology can just as easily be utilized for non-repair purposes, such as historical auditing with Flashback Query and undoing test changes with Flashback Database. Oracle Database 11g introduces an innovative method to manage and query long-term historical data with Flashback Data Archive. This release also provides an easy, one-step transaction backout operation, with the new Flashback Transaction capability. Webcast is at http://strtc.oracle.com (IE6, 7 & 8 supported only)Conference ID for the webcast is 6690835Conference Key: flashbackEnrollment is required. Please click here to enroll.Please use your real name in the name field (just makes it easier for us to help you out if we can't answer your questions on the call) Audio details: NZ Toll Free - 0800 888 157 orAU Toll Free - 1800420354 (or +61 2 8064 0613)Meeting ID: 7914841Meeting Passcode: 09062010 Talk to you all Wednesday 9th June Alex

  Read the article

• Get Proactive with Fusion Middleware

  - by Daniel Mortimer

  Prevent, Resolve, Upgrade ! If you have not seen or bookmarked it already, check out:Get Proactive with Fusion Middleware [ID 1388293.1]This is a one stop shop for navigating to proactive support material, tools, and communication channels related to Oracle Fusion Middleware e.g. Lifecycle Advisors Information Centers Diagnostic and Health Check Tools like RDA and OCM Support Communities Newsletters Furthermore, once in this support document, a click on the "Proactive Home" option in the menu will take you to the main Get Proactive support document. From this document you can access other product family "Get Proactive" documents such as the ones belonging to the Database and Enterprise Manager.Oracle Premier Support: Get Proactive! [ID 432.1]432.1 .. nice easy number to remember :-) The "Get Proactive" support documents will be updated on a monthly basis. If you have any comments or feedback feel free to post against this blog entry. Or alternatively click the "Rate this Document" icon when viewing the support document in My Oracle Support.

  Read the article

• RESTFul: state changing actions

  - by Miro Svrtan

  I'am planning to build RESTfull API but there are some architectural questions that are creating some problems in my head. Adding backend bussiness logic to clients is option that I would like to avoid since updating multiple client platforms is hard to maintain in real time when bussiness logic can rapidly change. Lets say we have article as a resource ( api/article ), how should we implement actions like publish, unpublish,activate or deactivate and so on but to try to keep it as simple as possible? 1) Should we use api/article/{id}/{action} since a lot of backend logic can happen there like pushing to remote locations or change of multiple properties. Probably the hardest thing here is that we need to send all article data back to API for updating and multiuser work could not be implemented. For instance editor could send 5 seconds older data and overwrite fix that some other journalist just did 2 seconds ago and there is no way that I could explain to clients this since those publishing an article is really not in any way connected to updating the content. 2) Creating new resource can also be an option, api/article-{action}/id , but then returned resource would not be article-{action} but article which I'am not sure if this is proper. Also in server side code article class is handling actuall work on both resource and I'm not sure if this goes against RESTfull thinking Any suggestions are welcomed..

  Read the article

• Passing javascript array of objects to WebService

  - by Yousef_Jadallah

  Hi folks. In the topic I will illustrate how to pass array of objects to WebService and how to deal with it in your WebService.   Suppose we have this javascript code :   <script language="javascript" type="text/javascript"> var people = new Array(); function person(playerID, playerName, playerPPD) { this.PlayerID = playerID; this.PlayerName = playerName; this.PlayerPPD = parseFloat(playerPPD); } function saveSignup() { addSomeSampleInfo(); WebService.SaveSignups(people, SucceededCallback); } function SucceededCallback(result, eventArgs) { var RsltElem = document.getElementById("divStatusMessage"); RsltElem.innerHTML = result; } function OnError(error) { alert("Service Error: " + error.get_message()); } function addSomeSampleInfo() { people = new Array(); people[people.length++] = new person(123, "Person 1 Name", 10); people[people.length++] = new person(234, "Person 2 Name", 20); people[people.length++] = new person(345, "Person 3 Name", 10.5); } </script> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } poeple :is the array that we want to send to the WebService. person :The function –constructor- that we are using to create object to our array. SucceededCallback : This is the callback function invoked if the Web service succeeded. OnError : this is the Error callback function so any errors that occur when the Web Service is called will trigger this function. saveSignup : This function used to call the WebSercie Method (SaveSignups), the first parameter that we pass to the WebService and the second is the name of the callback function.   Here is the body of the Page : <body> <form id="form1" runat="server"> <asp:ScriptManager ID="ScriptManager1" runat="server"> <Services> <asp:ServiceReference Path="WebService.asmx" /> </Services> </asp:ScriptManager> <input type="button" id="btn1" onclick="saveSignup()" value="Click" /> <div id="divStatusMessage"> </div> </form> </body> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }     Then main thing is the ServiceReference and it’s path "WebService.asmx” , this is the Web Service that we are using in this example.     A web service will be used to receive the javascript array and handle it in our code : using System; using System.Web; using System.Web.Services; using System.Xml; using System.Web.Services.Protocols; using System.Web.Script.Services; using System.Data.SqlClient; using System.Collections.Generic; [WebService(Namespace = "http://tempuri.org/")] [WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)] [ScriptService] public class WebService : System.Web.Services.WebService { [WebMethod] public string SaveSignups(object [] values) { string strOutput=""; string PlayerID="", PlayerName="", PlayerPPD=""; foreach (object value in values) { Dictionary<string, object> dicValues = new Dictionary<string, object>(); dicValues = (Dictionary<string, object>)value; PlayerID = dicValues["PlayerID"].ToString(); PlayerName = dicValues["PlayerName"].ToString(); PlayerPPD = dicValues["PlayerPPD"].ToString(); strOutput += "PlayerID = " + PlayerID + ", PlayerName=" + PlayerName + ",PlayerPPD= " + PlayerPPD +"<br>"; } return strOutput; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The first thing I implement System.Collections.Generic Namespace, we need it to use the Dictionary Class. you can find in this code that I pass the javascript objects to array of object called values, then we need to deal with every separate Object and explicit it to Dictionary<string, object> . The Dictionary Represents a collection of keys and values Dictionary<TKey, TValue> TKey : The type of the keys in the dictionary TValue : The type of the values in the dictionary. For more information about Dictionary check this link : http://msdn.microsoft.com/en-us/library/xfhwa508(VS.80).aspx   Now we can get the value for every element because we have mapping from a set of keys to a set of values, the keys of this example is :  PlayerID ,PlayerName,PlayerPPD, this created from the original object person.    Ultimately,this Web method return the values as string, but the main idea of this method to show you how to deal with array of object and convert it to  Dictionary<string, object> object , and get the values of this Dictionary.   Hope this helps,

  Read the article

• Initializing OpenFeint for Android outside the main Application

  - by Ef Es

  I am trying to create a generic C++ bridge to use OpenFeint with Cocos2d-x, which is supposed to be just "add and run" but I am finding problems. OpenFeint is very exquisite when initializing, it requires a Context parameter that MUST be the main Application, in the onCreate method, never the constructor. Also, the main Apps name must be edited into the manifest. I am trying to fix this. So far I have tried to create a new Application that calls my Application to test if just the type is needed, but you do really need the main Android application. I also tried using a handler for a static initialization but I found pretty much the same problem. Has anybody been able to do it? This is my working-but-not-as-intended code snippet public class DerpHurr extends Application{ @Override public void onCreate() { super.onCreate(); initializeOpenFeint("TestApp", "edthedthedthedth", "aeyaetyet", "65462"); } public void initializeOpenFeint(String appname, String key, String secret, String id){ Map<String, Object> options = new HashMap<String, Object>(); options.put(OpenFeintSettings.SettingCloudStorageCompressionStrategy, OpenFeintSettings.CloudStorageCompressionStrategyDefault); OpenFeintSettings settings = new OpenFeintSettings(appname, key, secret, id, options); //RIGHT HERE OpenFeint.initialize(***this***, settings, new OpenFeintDelegate() { }); System.out.println("OpenFeint Started"); } } Manifest <application android:debuggable="true" android:label="@string/app_name" android:name=".DerpHurr">

  Read the article

• redirect an old URL using web.config

  - by Dog

  i'm still very new to using URL rewrites and redirects and i'm having some problems on something i thought was quite simple... i've just rebuilt a website and want to redirect the old URLs to the new ones... for example : http://www.mydomain.com/about.asp?lang=1 should now be http://www.mydomain.com/content.asp?id=100230&title=about&langid=1 unfortunately, everything i've tried is giving me errors or simply does nothing. here is one rule i tried : <rule name="redirectoldabout" enabled="true" stopProcessing="true"> <match url="( .*)" negate="true" /> <conditions> <add input="{HTTP_HOST}" pattern="^mydomain\.com/about\.asp\?lang=1$" /> </conditions> <action type="Redirect" url="http://www.mydomain.com/content.asp?id=100230&title=about&langid=1" redirectType="Permanent" /> but i get an error back : HTTP Error 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid. any suggestions as to what i'm doing wrong? thanks dog

  Read the article

• Problem with APTonCD application

  - by Harikrishnan

  I created a iso image using aptoncd & burned it to a dvd. Now when i tried to restore, the program does not detect the dvd in the drive. It shows "Please insert a disc in the drive." and if we click "ok" it shows E: Failed to mount the cdrom. The dvd is in the drive itself. I tried sudo lshw -C disk and the output is: *-cdrom description: DVD-RAM writer product: DVDRAM GH22NS50 vendor: HL-DT-ST physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 logical name: /media/APTonCD logical name: /media/apt version: TN02 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 mount.fstype=iso9660 mount.options=ro,relatime,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500 state=mounted status=ready *-medium physical id: 0 logical name: /dev/cdrom logical name: /media/APTonCD logical name: /media/apt configuration: mount.fstype=iso9660 mount.options=ro,relatime,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500 state=mounted Then i checked in disk utility application. in that dvd rom is shown as /dvd/sr0 My ubuntu version is 10.10. Please help me to solve the problem.

  Read the article

• Gnome shell not starting at login, but can start from terminal (Ubuntu 12.04)

  - by Mat Leonard

  I upgraded to Ubuntu 12.04 recently and for some reason it broke Gnome 3. The shell doesn't start up at login. My .xsession-errors looks like this right after I log in: gnome-session[1689]: WARNING: Session 'gnome' runnable check failed: Timed out (gnome-settings-daemon:1744): color-plugin-WARNING **: failed to get edid: unable to get EDID for output (gnome-settings-daemon:1744): color-plugin-WARNING **: unable to get EDID for xrandr-default: unable to get EDID for output (gnome-settings-daemon:1744): color-plugin-WARNING **: failed to reset xrandr-default gamma tables: gamma size is zero ** Message: applet now removed from the notification area ** Message: using fallback from indicator to GtkStatusIcon ** Message: moving back from GtkStatusIcon to indicator Then I can run gnome-shell --replace, the shell starts up and everything works. This is what I get immediately after: Window manager warning: Log level 16: Unable to register authentication agent: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: An authentication agent already exists for the given subject Window manager warning: Log level 16: Error registering polkit authentication agent: GDBus.Error:org.freedesktop.PolicyKit1.Error.Failed: An authentication agent already exists for the given subject (polkit-error-quark 0) (gnome-shell:2442): folks-WARNING **: Failed to find primary PersonaStore with type ID 'eds' and ID 'system'. Individuals will not be linked properly and creating new links between Personas will not work. The configured primary PersonaStore's backend may not be installed. If you are unsure, check with your distribution Also, if I run /usr/lib/nux/unity_support_test -p, everything comes back as Yes and this checks out: OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce 8300 GS/PCIe/SSE2 OpenGL version string: 3.3.0 NVIDIA 295.40 It isn't a huge problem since I can get gnome shell to work, but it is a little annoying. So, I'd like to fix this. Thanks for your help.

  Read the article

• Can't access external hard drives or thumb drives

  - by calden

  I am not a complete linux noob but I don't know a lot either and would greatly appreciate some help with this. I just installed Ubuntu 10.10 onto my laptop. Everything is working great however USB devices such as thumb drives and external hard drives wont show up. I have been looking around a bit and when I run sudo fdisk -l it displays this: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00065684 Device Boot Start End Blocks Id System /dev/sda1 * 1 29255 234983424 83 Linux /dev/sda2 29255 30402 9212929 5 Extended /dev/sda5 29255 30402 9212928 82 Linux swap / Solaris Disk /dev/sdb: 16.0 GB, 16026435072 bytes 64 heads, 32 sectors/track, 15283 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000df90d Device Boot Start End Blocks Id System /dev/sdb1 * 1 15283 15649776 7 HPFS/NTFS It does seem to display my 16 gig thumb drive but other then seeing it here I cant access it to read and write files to it. It does the same with my external hard drive. I know those devices work as I have tried them on my other computer and they are working fine. Also this is what is in fstab if this will help anybody help me: proc /proc proc nodev,noexec,nosuid 0 0 /dev/sdb1 / ext4 errors=remount-ro 0 1 /dev/sdb5 none swap sw 0 0 Thank you very much for the help everyone.

  Read the article

• Class hierarchy problem in this social network model

  - by Gerenuk

  I'm trying to design a class system for a social network data model - basically a link/object system. Now I have roughly the following structure (simplified and only relevant methods shown) class Data: "used to handle the data with mongodb" "can link, unlink data and also return other linked data" "is basically a proxy object that only stores _id and accesses mongodb on requests" "it looks like {_id: ..., _out: [id1, id2,...], _inc: [id3, id4, ...]}" def get_node(self, id) "create a new Data object from the underlying mongodb" "each data object can potentially create a reference object to new mongo data" "this is needed when the data returns the linked objects" class Node: """ this class proxies linking calls to .data it includes additional network logic operations whereas Data only contains a basic database solution """ def __init__(self, data): "the infrastructure realization is stored as composition by an included object data" "Node bascially proxies most calls to the infrastructure object data" def get_node(self, data): "creates a new object of class Object or Link depending on data" class Object(Node): "can have multiple connections to Link" class Link(Node): "has one 'in' and one 'out' connection to an Object" This system is working, however maybe wouldn't work outside Python. Note that after reading links Now I have two questions here: 1) I want to infrastructure of the data storage to be replacable. Earlier I had Data as a superclass of Node so that it provided the neccessary calls. But (without dirty Python tricks) you cannot replace the superclass dynamically. Is using composition therefore recommended? The drawback is that I have to proxy most calls (link, unlink etc). Any thoughts? 2) The class Node contains the common method .get_node which is used to built new Object or Link instances after reading out the data. Some attribute of data decided whether the object which is only stored by id should be instantiated as an Object or Link class. The problem here is that Node needs to know about Object and Link in advance, which seems dodgy. Do you see a different solution? Both Object and Link need to instantiate one of all possible types depending on what the find in their linked data. Are there any other ideas how to implement a flexible Object/Link structure where the underlying database storage is isolated?

  Read the article

• how to stop the array of sprite in cocos2d?

  - by prakash s

  I am devoloping the bubble shooter game in cocos2d how to stop the sprite movement at the center of the game scene in my game bec i want to shoot the bubble after stopping the movenent at certain position here is my code -(void)addTarget { CGSize winSize = [[CCDirector sharedDirector] winSize]; NSMutableArray * movableSprites = [[NSMutableArray alloc] init]; NSArray *images = [NSArray arrayWithObjects:@"1.png", @"2.png", @"3.png", @"4.png",@"5.png", @"6.png", @"7.png",@"8.png" ,nil]; for(int i = 0; i < images.count; ++i) { int index = (arc4random() % 8)+1; NSString *image = [NSString stringWithFormat:@"%d.png", index]; CCSprite*target = [CCSprite spriteWithFile:image]; // generate random number based on size of array (array size is larger than 10) float offsetFraction = ((float)(i+1))/(images.count+1); //target.position = ccp(winSize.width*offsetFraction, winSize.height/2); target.position = ccp(350*offsetFraction, 460); [self addChild:target]; [movableSprites addObject:target]; id actionMove = [CCMoveTo actionWithDuration:10 position:ccp(350*offsetFraction, 100)]; id actionMoveDone = [CCCallFuncN actionWithTarget:self selector:@selector(spriteMoveFinished:)]; [target runAction:[CCSequence actions:actionMove, actionMoveDone, nil]]; } here bubbles are moving from top to bottom but after 5 rows my bubble movement should be stop so please help me to get that logic

  Read the article

• how to give action to the CCArray which contain bubbles(sprites)

  - by prakash s

  I am making bubbles shooter game in cocos2d I have taken one array in that i have inserted number of different color bubbles and i showing on my game scene also , but if give some move action to that array ,it moving down but it displaying all the bubbles at one position and automatically destroying , what is the main reason behind this please help me here is my code: -(void)addTarget { CGSize winSize = [[CCDirector sharedDirector] winSize]; //CCSprite *target = [CCSprite spriteWithFile:@"3.png" rect:CGRectMake(0, 0, 256, 256)]; NSMutableArray * movableSprites = [[NSMutableArray alloc] init]; NSArray *images = [NSArray arrayWithObjects:@"1.png", @"2.png", @"3.png", @"4.png",@"5.png",@"1.png",@"5.png", @"3.png", nil]; for(int i = 0; i < images.count; ++i) { NSString *image = [images objectAtIndex:i]; // generate random number based on size of array (array size is larger than 10) CCSprite*target = [CCSprite spriteWithFile:image]; float offsetFraction = ((float)(i+1))/(images.count+1); //target.position = ccp(winSize.width*offsetFraction, winSize.height/2); target.position = ccp(350*offsetFraction, 460); // [[CCActionManager sharedManager ] pauseAllActionsForTarget:target ] ; [self addChild:target]; [movableSprites addObject:target]; //[target runAction:[CCMoveTo actionWithDuration:20.0 position:ccp(0,0)]]; id actionMove = [CCMoveTo actionWithDuration:10 position:ccp(winSize.width/2,winSize. height/2)]; id actionMoveDone = [CCCallFuncN actionWithTarget:self selector:@selector(spriteMoveFinished:)]; [target runAction:[CCSequence actions:actionMove, actionMoveDone, nil]]; } } after the move at certain position i want to display all the bubbles in centre of my window

  Read the article

• How do I get Graphics drivers / bluetooth / card reader working on an Acer Aspire V3-571G?

  - by Adam

  A couple of days ago I bought an Acer Aspire V3-571G laptop without a system installed on it. The only thing that was there was Linux Linpus. I created a bootable CD with Ubuntu 12.04 64-bit - I read that my processor was 64 bit and that it might be a good configuration for my gear (I'm not especially fluent with all the computer stuff, still trying to learn) and replaced Linpus with Ubuntu. Everything seemed to work fine, but there're few exceptions to that which came pass my way. My bluetooth doesn't work. It seems to be switched on, but when I check my system settings the button is actually off, and I can't drag it 'perminently' to the 'on' position. Tried a couple of commands I found on the net, none of them helped and there was no word whatsoever in my BIOS settings about enabling bluetooth. My card reader has some serious problems with copying more than one file at a time. I tried to put some music on my phone through a MicroSD card adapter (because my bluetooth doesn't work) and it got stuck every single time I copied an album on it. I'm not sure if all my drivers were properly installed, so I checked in the terminal if it could tell me sth about my graphics. typed: sudo lshw -c display and what i got was: *-display UNCLAIMED description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller cap_list configuration: latency=0 resources: memory:b2000000-b2ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:2000(size=128) *-display description: VGA compatible controller product: Ivy Bridge Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:44 memory:b3000000-b33fffff memory:c0000000-cfffffff ioport:3000(size=64) As I said I'm no expert and not english-speaking generally, but it doesn't seem to be right. I've got a NVIDIA GeForce GT 640M.

  Read the article

• What causes player box/world geometry glitches in old games?

  - by Alexander

  I'm looking to understand and find the terminology for what causes - or allows - players to interfere with geometry in old games. Famously, ID's Quake3 gave birth to a whole community of people breaking the physics by jumping, sliding, getting stuck and launching themselves off points in geometry. Some months ago (though I'd be darned if I can find it again!) I saw a conference held by Bungie's Vic DeLeon and a colleague in which Vic briefly discussed the issues he ran into while attempting to wrap 'collision' objects (please correct my terminology) around environment objects so that players could appear as though they were walking on organic surfaces, while not clipping through them or appear to be walking on air at certain points, due to complexities in the modeling. My aim is to compose a case study essay for University in which I can tackle this issue in games, drawing on early exploits and how techniques have changed to address such exploits and to aid in the gameplay itself. I have 3 current day example of where exploits still exist, however specifically targeting ID Software clearly shows they've massively improved their techniques between Q3 and Q4. So in summary, with your help please, I'd like to gain a slightly better understanding of this issue as a whole (its terminology mainly) so I can use terms and ask the right questions within the right contexts. In practical application, I know what it is, I know how to do it, but I don't have the benefit of level design knowledge yet and its technical widgety knick-knack terms =) Many thanks in advance AJ

  Read the article

• EPM Patch Set Updates - May 2014

  - by Paul Anderson -Oracle

  .PSU_DocID { font-family: Arial, Helvetica, sans-serif; font-size: 9px; font-style: normal; } .PSU_PatchID { font-family: Arial, Helvetica, sans-serif; font-size: 11px; font-style: normal; } The following is Enterprise Performance Management (EPM) Patch Set Updates (PSU) released last month (May 2014).  The "Patch" ID links will access the patch directly for download from "My Oracle Support" (login required). Oracle Hyperion 11.1.2.3.x Hyperion Essbase Studio Server 11.1.2.3.501 - Patch 18505506 Hyperion Essbase Studio Console MSI 11.1.2.3.501 - Patch 18505503 Oracle Hyperion Profitability and Cost Management 11.1.2.3.501 - Patch 18685108 Hyperion Strategic Finance 11.1.2.3.501 - Patch 18400594 Hyperion Essbase Admin Services Server 11.1.2.3.501 - Patch 18505475 Hyperion Essbase Admin Services Console MSI 11.1.2.3.501 - Patch 18505468 Hyperion Essbase RTC 11.1.2.3.501 - Patch 18505499 Hyperion Essbase Server 11.1.2.3.501 - Patch 18505489 Hyperion Essbase Client 11.1.2.3.501 - Patch 18505494 Hyperion Essbase Client MSI 11.1.2.3.501 - Patch 18505483 Hyperion Analytic Provider Services 11.1.2.3.501 - Patch 18505515 Oracle Hyperion 11.1.2.2.x Hyperion Financial Management 11.1.2.2.307 - Patch 18490422 NOTE: Some patches listed may have been released a few days outside of the stated month. To view the patches released over previous months visit the earlier Blog posts: April 2014 EPM PSU Released March 2014 EPM PSU Released February 2014 EPM PSU Released January 2014 EPM PSU Released For the latest Enterprise Performance Management Patch Set Updates visit: Oracle Hyperion EPM Products [Doc ID 1400559.1] Be sure to review the related Readme files available per Patch Set Update.

  Read the article

• Google reverse an analytic

  - by Dan

  I am confused about what code must be executed to reverse a google analytic. I have the following code pasted within a test page: <body onLoad=”function()”> <script type="text/javascript"> var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-25305776-3']); _gaq.push(['_trackPageview']); _gaq.push(['_addTrans', '11455', // order ID - required '-42.38', // total - required '-2.38', // tax '-15.00' // shipping ]); _gaq.push(['_addItem', '11455', // order ID - necessary to associate item with transaction 'Evan Turner Turningpoint™ Basketball Pants', // product name '25.00', // unit price - required '-1' // quantity - required ]); _gaq.push(['_trackTrans']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); </script> Is this correct? Thanks!

  Read the article

• Ubuntu installer does not show drives

  - by Tanweer Rashid

  I am trying to install Ubuntu 12.04 LTS on my Inspiron laptio, but the installer does not show any drives. My system has a 1TB SATA drive and a 32GB SSD. As far as I can figure, the boot files are kept on the SSD for fast startup (for Windows). During Win7 installation, I had to manually load drivers for RAID controller to see all available drives. Running fdisk -l from the live CD shows the following: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x234b4782 Device Boot Start End Blocks Id System /dev/sda1 63 80324 40131 de Dell Utility /dev/sda2 * 81920 41627647 20772864 7 HPFS/NTFS/exFAT /dev/sda3 41627648 357019647 157696000 7 HPFS/NTFS/exFAT /dev/sda4 357019648 1953517567 798248960 f W95 Ext'd (LBA) /dev/sda5 672415744 1312966655 320275456 7 HPFS/NTFS/exFAT /dev/sda6 1312968704 1953517567 320274432 7 HPFS/NTFS/exFAT Disk /dev/sdb: 32.0 GB, 32017047552 bytes 255 heads, 63 sectors/track, 3892 cylinders, total 62533296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x234b474b Device Boot Start End Blocks Id System /dev/sdb1 2048 16775167 8386560 84 OS/2 hidden C: drive ubuntu@ubuntu:~$ In the Ubuntu installer, I can only choose /dev/sdb for "Device for boot loader installation", and sdb doesn't show any drives. I cannot select /dev/sda. Any ideas anyone? Thanks.

  Read the article

• Discs in DVD Drive not being read

  - by I Heart Ubuntu

  Does anyone have an experience with Ubuntu that is no longer reading discs in the DVD drive? This is my first time Ubuntu does not see the disc :| The disc is fine and works on my other Ubuntu computers. The drive is there and powered. I can even type in eject in a terminal and the drive will open. Using the command: sudo lshw -C disk I am able to see info about my drive too. Actually BOTH of my internal DVD drives cannot read discs anymore. If the output is not readable below, here is the info in pastebin. http://pastebin.com/GqqSCTPw *-cdrom:0 description: DVD writer product: DVD_RW ND-3500AG vendor: _NEC physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/cdrom1 logical name: /dev/cdrw1 logical name: /dev/dvd1 logical name: /dev/dvdrw1 logical name: /dev/scd0 logical name: /dev/sr0 version: 2.1B serial: [_NEC DVD_RW ND-3500AG2.1B06022300BT-LIGGY capabilities: removable audio cd-r cd-rw dvd dvd-r configuration: ansiversion=5 status=nodisc *-cdrom:1 description: DVD-RAM writer product: CDDVDW SH-S222A vendor: TSSTcorp physical id: 0.1.0 bus info: scsi@0:0.1.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd1 logical name: /dev/sr1 version: SB01 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc

  Read the article

• how to generate random bubbles from array of sprites in cocos2d?

  - by prakash s

  I am devoloping the bubble shooter game in cocos2d how to generate random bubbles from array of sprites here is my code (void)addTarget { CGSize winSize = [[CCDirector sharedDirector] winSize]; //CCSprite *target = [CCSprite spriteWithFile:@"3.png" rect:CGRectMake(0, 0, 256, 256)]; NSMutableArray * movableSprites = [[NSMutableArray alloc] init]; NSArray *images = [NSArray arrayWithObjects:@"1.png", @"2.png", @"3.png", @"4.png",@"5.png",@"1.png",@"5.png", @"3.png", nil]; for(int i = 0; i < images.count; ++i) { NSString *image = [images objectAtIndex:i]; // generate random number based on size of array (array size is larger than 10) CCSprite*target = [CCSprite spriteWithFile:image]; float offsetFraction = ((float)(i+1))/(images.count+1); target.position = ccp(winSize.width*offsetFraction, winSize.height/2); target.position = ccp(350*offsetFraction, 460); [self addChild:target]; [movableSprites addObject:target]; //[target runAction:]; id actionMove = [CCMoveTo actionWithDuration:10 position:ccp(winSize.width/2,winSize. height/2)]; This code generating bubbles with *.png colour bubbles but i want to generate randomly because for shooting the bubbles by shooter class help me please id actionMoveDone = [CCCallFuncN actionWithTarget:self selector:@selector(spriteMoveFinished:)]; [target runAction:[CCSequence actions:actionMove, actionMoveDone, nil]]; } }

  Read the article

• Extending AutoVue Through the API

  - by GrahamOracle

  The AutoVue API (previously called the “VueBean” API) is a great way to extend AutoVue Client/Server Deployment – specifically the client component – beyond the out-of-the-box capabilities and into new use-cases. In addition to having a solid grasp of J2SE programming, make sure to leverage the following resources if you’re developing or interested in developing customizations/extensions to AutoVue Client/Server Deployment: Programmer’s Guide: Before all else, read through the AutoVue API Programmer’s Guide to get an understanding of the architecture of the API. The Programmer’s Guide is included with the installation of AutoVue, and is posted on the Oracle Technology Network (OTN) website for the recent versions of AutoVue: http://www.oracle.com/technetwork/documentation/autovue-091442.html Javadocs: The AutoVue API Javadocs document the many packages, classes, and methods available to you. The Javadocs are included in the product installation under the \docs\JavaDocs\VueBean folder (easiest starting point is through the file index.html). Integrations Forum: If you have development questions that aren’t answered through the documentation, feel free to register and post in the public AutoVue Integrations Forum. For more information refer to the following blog post from October 2010: https://blogs.oracle.com/enterprisevisualization/entry/exciting_news_autovue_integrat Code Samples: Although the Oracle Support team’s scope of Support for API/customization topics is to answer questions regarding information already provided in the documentation (i.e. not to design or develop custom solutions), there are cases where Support comes across interesting samples or code snippets that may benefit various customers. In those cases, our Support team posts the samples into the Oracle knowledge base, and tracks them through a single reference note. The link to the KM Note depends on how you currently access the My Oracle Support portal: Flash interface: https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=REFERENCE&id=1325990.1 (New) HTML interface: https://supporthtml.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?type=DOCUMENT&id=1325990.1 Happy coding!

  Read the article

• Making LISPs manageable

  - by Andrea

  I am trying to learn Clojure, which seems a good candidate for a successful LISP. I have no problem with the concepts, but now I would like to start actually doing something. Here it comes my problem. As I mainly do web stuff, I have been looking into existing frameworks, database libraries, templating libraries and so on. Often these libraries are heavily based on macros. Now, I like very much the possibility of writing macros to get a simpler syntax than it would be possible otherwise. But it definitely adds another layer of complexity. Let me take an example of a migration in Lobos from a blog post: (defmigration add-posts-table (up [] (create clogdb (table :posts (integer :id :primary-key ) (varchar :title 250) (text :content ) (boolean :status (default false)) (timestamp :created (default (now))) (timestamp :published ) (integer :author [:refer :authors :id] :not-null)))) (down [] (drop (table :posts )))) It is very readable indeed. But it is hard to recognize what the structure is. What does the function timestamp return? Or is it a macro? Having all this freedom of writing my own syntax means that I have to learn other people's syntax for every library I want to use. How can I learn to use these components effectively? Am I supposed to learn each small DSL as a black box?

  Read the article

• What is the aim of this email? Is this a ping/sping? [closed]

  - by mplungjan

  Hi, I received this spam in my catch-all. As a webmaster of the domain it was sent to, I am really curious what the reason for this mail is. It was sent to a non-existent user "tania" on my domain - here I used mydomain.zzz - what do the sender want to achieve? Since many mail servers have stopped backscattering, not getting a bounce would not mean anything, would it? And if this is off topic, where inb the StackExchange WOULD it be on topic? Delivered-To: [email protected] Received: (qmail 8015 invoked from network); 27 Jan 2011 02:32:47 -0000 Received: from unknown (HELO p3pismtp01-021.prod.phx3.secureserver.net) ([10.6.12.26]) (envelope-sender <[email protected]>) by smtp35.prod.mesa1.secureserver.net (qmail-1.03) with SMTP for <[email protected]>; 27 Jan 2011 02:32:47 -0000 X-IronPort-Anti-Spam-Result: At4FAAlnQE1GVjtCVGdsb2JhbACWXo4gCwEWCA0YJLwyhU8EhRc Received: from mx.dt3ls.com ([70.86.59.66]) by p3pismtp01-021.prod.phx3.secureserver.net with ESMTP; 26 Jan 2011 19:32:47 -0700 Received: from 70.86.59.66 by mx.dt3ls.com (Merak 8.9.1) with ASMTP id JXF39710 for <[email protected]>; Wed, 26 Jan 2011 17:31:10 -0500 Return-Path: [email protected] Status: Message-ID: <20110126173109.4d9d6c3f2b@1c3c> From: "Tech Support" <[email protected]> To: <[email protected]> Subject: Information, as instructed. Date: Wed, 26 Jan 2011 17:31:09 -0500 X-Priority: 3 X-Mailer: General-Mailer v.3 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Quote: I give it to you not that you may remember time, but that you might forget it now and then for a moment and not spend all your breath trying to conquer it. Because no battle is ever won he said. They are not even fought. The field reveals to a man his own folly and despair, and victory is an illusion of philosophers and fools. William Faulkner The Sound and the Fury

  Read the article

• How to parse JSON data from web more faster [closed]

  - by Kaidul Islam Sazal

  I have json inventory inventory.json on the server like this: [ { "body" : "SUV", "color" : { "ext" : "White diamond pearl", "int" : "Taupe" }, "id" : "276181", "make" : "Acura", "miles" : 35949, "model" : "RDX", "pic" : [ { "full" : "http://images1.dealercp.com/90961/000JNBD/001_0292.jpg" } ], "power" : { "drive" : "Front wheel drive", "eng" : "2.3L DOHC PGM-FI 16-VALVE", "trans" : "Automatic" }, "price" : { "net" : 29488 }, "stock" : "6942", "trim" : "AWD 4dr Tech Pkg SUV", "vin" : "5J8TB2H53BA000334", "year" : 2011 }, { "body" : "Sedan", "color" : { "ext" : "Premium white pearl", "int" : "Taupe" }, "id" : "275622", "make" : "Acura", "miles" : 40923, "model" : "TSX", "pic" : [ { "full" : "http://images1.dealercp.com/90961/000JMC6/001_1765.jpg" } ], "power" : { "drive" : "Front wheel drive", "eng" : "2.4L L4 MPI DOHC 16V", "trans" : "Automatic" }, "price" : { "net" : 22288 }, "stock" : "6945", "trim" : "4dr Sdn I4 Auto Sedan", "vin" : "JH4CU2F66AC011933", "year" : 2010 } ] here are two index, There are almost 5000 index like this. I parsed this json like this: var url = "inventory/inventory.json"; $.getJSON(url, function(data){ $.each(data, function(index, item){ //straight-forward loop if(item.year == 2012) { $('#desc').append(item.make + ' ' + item.model + ' ' + '<br/>' + item.price.net + '<br/>' + item.pic[0].full); } }); }); This is working fine.But the problem is that, this searching and fetching process is little bit slow as there are 5000 indexes already and it's increasing day by day. It seems that, it is a straight-forward loop to parse the data and a normal brute-force method. Now I want to know if there any time efiicient way to parse more faster.Any faster method to parse instead of straight-forward loop ?

  Read the article

< Previous Page | 641 642 643 644 645 646 647 648 649 650 651 652  | Next Page >