Search Results

Search found 26263 results on 1051 pages for 'linux guest'.

Page 647/1051 | < Previous Page | 643 644 645 646 647 648 649 650 651 652 653 654  | Next Page >

  • Recover data from a Thecus N4100 NAS jbod partition

    - by TimothyP
    I have a Thecus N4100 NAS wich had a 2TB drive in it configured as jbod partition. Later I tried adding a second drive to expand the available space. I added it to the jbod configuration but I did not get any extra space. Then I tried removing the second drive but then the NAS system indicated the jbod configuration was damaged. After a reboot it told me there is no configuration and I need to create a new RAID/jbod configuration and that I would lose all data on the drive. Of course I did not do this, I took the 2TB drive and checked with Linux if the partition was still there and it is... completely intact. I found that linux recognizes it as a /dev/mdX device and that I should be able to mount it but I don't know the file system type. Anyway.... is there a way to recover the data? Since everything has always been on a single drive it should all be there right? I can connect the drive to Windows , Linux or MacOS so whatever gets the job done.

    Read the article

  • Installing Numpy locally

    - by Néstor
    I posted this question originally on StackOverflow, but a user suggested I moved it here so here I go! I have an account in a remote computer without root permissions and I needed to install a local version of Python (the remote computer has a version of Python that is incompatible with some codes I have), Numpy and Scipy there. I've been trying to install numpy locally since yesterday, with no success. I successfully installed a local version of Python (2.7.3) in /home/myusername/.local/, so I access to this version of Python by doing /home/myusername/.local/bin/python. I tried two ways of installing Numpy: I downloaded the lastest stable version of Numpy from the official webpage, unpacked it, got into the unpacked folder and did: /home/myusername/.local/bin/python setup.py install --prefix=/home/myusername/.local. However, I get the following error, which is followed by a series of other errors (deriving from this one): gcc -pthread -shared build/temp.linux-x86_64-2.7/numpy/core/blasdot/_dotblas.o -L/usr/local/lib -Lbuild/temp.linux-x86_64-2.7 -lptf77blas -lptcblas -latlas -o build/lib.linux-x86_64-2.7/numpy/core/_dotblas.so /usr/bin/ld: /usr/local/lib/libptcblas.a(cblas_dptgemm.o): relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC Not really knowing what this meant (except that the error apparently has to do with the LAPACK library), I just did the same command as above, but now putting LDFLAGS='-fPIC', as suggested by the error i.e., I did LDFLAGS="-fPIC" /home/myusername/.local/bin/python setup.py install --prefix=/home/myusername/.local. However, I got the same error (except that the prefix -fPIC was addeded after the gcc command above). I tried installing it using pip, i.e., doing /home/myusername/.local/bin/pip install numpy /after successfully instaling pip in my local path). However, I get the exact same error. I searched on the web, but none of the errors seemed to be similar to mine. My first guess is that this has to do with some piece of code that needs root permissions to be executed, or maybe with some problem with the version of the LAPACK libraries or with gcc (gcc version 4.1.2 is installed on the remote computer). Help, anyone?

    Read the article

  • apt-mirror does not mirror the i18n directory

    - by Fred
    I need to setup a local Ubuntu mirror so the whole network doesn't need to hit remote servers in order to update and install new packages. Following a brief tutorial found here, I managed to get a server up and running that correctly mirrors packages from the main and restricted categories. However, when I call apt-get update on a client, I get a couple of errors such as : Ign http://192.168.1.18 karmic/main Translation-fr Ign http://192.168.1.18 karmic/restricted Translation-fr Checking back on the server, I see that apt-mirror only took the binary-amd64 directory of the mirror, and didn't take i18n that would provide Translation-fr. The manpage for apt-mirror doesn't say anything about i18n, and Google is of no help either. How do I properly mirror i18n? My current mirror.list file is as follows : ############# config ################## # # set base_path /var/spool/apt-mirror # # if you change the base path you must create the directories below with write privileges # # set mirror_path $base_path/mirror # set skel_path $base_path/skel # set var_path $base_path/var # set cleanscript $var_path/clean.sh # set defaultarch <running host architecture> # set postmirror_script $var_path/postmirror.sh set run_postmirror 0 set nthreads 20 set _tilde 0 # ############# end config ############## deb http://mirror.cc.columbia.edu/pub/linux/ubuntu/archive karmic main restricted deb http://mirror.cc.columbia.edu/pub/linux/ubuntu/archive karmic-updates main restricted clean http://mirror.cc.columbia.edu/pub/linux/ubuntu/archive

    Read the article

  • MySql server answer #2002

    - by LOIC
    Since this morning, phpmyadmin is giving me the error message #2002 the server doesn't answer (or the connection to local Mysql is not well configured) and a message about control-use. I'm disappointed it used to work until 2am last night and now the MySQL engine doesn't want to start (told me sometimes about sockets ..) LAMPP is installed on a ubuntu 12.04 lm@Famou:~$ sudo service mysqld status mysqld: unrecognized service    & lm@Famou:~$ sudo service mysqld start mysqld: unrecognized service  : It never works with 'service' !!! and root@Famou:/opt/lampp# /opt/lampp/lampp restart Stopping XAMPP for Linux 1.7.7... XAMPP: Stopping Apache with SSL... XAMPP: XAMPP-MySQL is not running. XAMPP: Stopping ProFTPD... XAMPP stopped. Starting XAMPP for Linux 1.7.7... XAMPP: Starting Apache with SSL (and PHP5)... XAMPP: Starting MySQL... XAMPP: Couldn't start MySQL! XAMPP: Starting ProFTPD... XAMPP for Linux started. is the result of restart lampp

    Read the article

  • How to download Vim script on the command-line?

    - by HaiYuan Zhang
    Whenever I want to install a new Vim script on the Linux server I'm working on, my typical workflow is as the following: surf the plugin's homepage in Vim online using FireXXXX download a right version of the plugin to my laptop by click some highlighted link upload the downloaded plugin from my laptop to Linux server using WinSCP which is really inconvenient. I don't know what is the magic behind this: I mean for the same hyperlink I click it in web browser. I can let you download it but use Wget plus the hyperlink in Linux command-line will end up with nothing but an error indication. Hyperlink in the web browser. Otherwise I can get the link in web browser and then use Wget or some similar tool to actually do the downloding. I try new cool Vim scripts quite ofte , so you can imagine my dismay when I have to repeat the tedious action all the time. What are some tips which can let me download the Vim scripts in a more "professional" way? Post edit: My problem is not find a tool like Wget or cURL. The problem I met is quite specific; to use these tools to download a Vim script. Let's take http://www.vim.org/scripts/script.php?script_id=30 as an example. It's the normal place where one can get the script, at least for me. But I can't find an working URL from this page that can feed to Wget.

    Read the article

  • why does the partition start on sector 2048 instead of 63

    - by gcb
    I had two drives partitioned the same and running 2 raid partitions on each. One died and I replaced it under warranty for the same model. While trying to partition it, the first partition can only start on sector 2048, instead of 63 that was before. Driver have different geometry as previous and remaining ones. (Fewer heads/more cylinders) old drive: $ sudo fdisk -c -u -l /dev/sdb Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000aa189 Device Boot Start End Blocks Id System /dev/sdb1 * 63 174080339 87040138+ 83 Linux /dev/sdb2 174080340 182482334 4200997+ 82 Linux swap / Solaris /dev/sdb3 182482335 3907024064 1862270865 fd Linux raid autodetect remanufactured drive received from warranty: $ sudo fdisk -c -u -l /dev/sda Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 81 heads, 63 sectors/track, 765633 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d0b5d Device Boot Start End Blocks Id System /dev/sda1 2048 ... why is that?

    Read the article

  • Moving Microsoft Exchange server to the private network.

    - by Alexey Shatygin
    In one of the offices, we have a 50-computers network, which had only one server machine: Windows 2003 Server Microsoft ISA Server Microsoft Exchange 2003 This server worked as a gateway (proxy server), mail server, file server, firewall and domain controller. It had two network interfaces, one for WAN (let's say 222.222.222.222) and one for LAN (192.168.1.1). I set up a Linux box to be the gateway (without a proxy), so the Linux box now has the following interfaces: 222.222.222.222 (our external IP, we removed it from the Windows machine) and 192.168.1.100 (internal IP), but we need to keep the old Windows server as a mail server and a proxy for some of our users, until we prepare another Linux machine for that, so I need the mail server on that machine to be available from the Internet. I set up iptables rules to redirect all the incoming connections on the 25th and 110th ports of our external IP to 192.168.1.1:25 and 192.168.1.1:110 and when I try to telnet our SMTP service telnet 222.222.222.222 25 I get the greetings from our windows server's (192.168.1.1) SMTP service, and that's works fine. But when I telnet POP3 service telnet 222.222.222.222 110 I only get the blank black screen and the connection seem to disappear if I press any button. I've checked the ISA rules - everything seems to be the same for 110th and 25th ports. When I telnet on 110th ports of our Windows server from our new gateway machine like this: telnet 192.168.1.1 110 I get the acces to it's POP3 service: +OK Microsoft Exchange Server 2003 POP3 server version 6.5.7638.1 (...) ready. What sould I do, to make the POP3 service available through our new gateway?

    Read the article

  • HTTP cache for my virtual machines

    - by MathematicalOrchid
    I have several Linux virtual machines running on my home PC. One of the quirks of Linux is that every time you run a package manager, it wants to "refresh" the configured software repositories - which basically means it wants to download a file from the Internet. If I revert to an earlier snapshot of the VM, then next time I run the package manager it will re-download the exact same data again [since it no longer exists in the VM]. It seems a shame to waste bandwidth endlessly downloading the same data over and over again, so I was wondering if there's some way I can set up some kind of HTTP proxy server that caches downloaded files. I have no idea how you would do such a thing though. In particular, it needs to be set up so that the VMs don't need to "know" that the cache is there; it needs to be transparent. But I don't know how to do that. Any suggestions on what software I'd need to use? It would be nice if I could run it under the Windows host OS, but running a small VM with a Linux guest is also possible...

    Read the article

  • Can I use iptables on my Varnish server to forward HTTPS traffic to a specific server?

    - by Dylan Beattie
    We use Varnish as our front-end web cache and load balancer, so we have a Linux server in our development environment, running Varnish with some basic caching and load-balancing rules across a pair of Windows 2008 IIS web servers. We have a wildcard DNS rule that points *.development at this Varnish box, so we can browse http://www.mysite.com.development, http://www.othersite.com.development, etc. The problem is that since Varnish can't handle HTTPS traffic, we can't access https://www.mysite.com.development/ For dev/testing, we don't need any acceleration or load-balancing - all I need is to tell this box to act as a dumb proxy and forward any incoming requests on port 443 to a specific IIS server. I suspect iptables may offer a solution but it's been a long while since I wrote an iptables rule. Some initial hacking has got me as far as iptables -F iptables -A INPUT -p tcp -m tcp --sport 443 -j ACCEPT iptables -A OUTPUT -p tcp -m tcp --dport 443 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 443 -j DNAT --to 10.0.0.241:443 iptables -t nat -A POSTROUTING -p tcp -d 10.0.0.241 --dport 443 -j MASQUERADE iptables -A INPUT -j LOG --log-level 4 --log-prefix 'PreRouting ' iptables -A OUTPUT -j LOG --log-level 4 --log-prefix 'PostRouting ' iptables-save > /etc/iptables.rules (where 10.0.0.241 is the IIS box hosting the HTTPS website), but this doesn't appear to be working. To clarify - I realize there's security implications about HTTPS proxying/caching - all I'm looking for is completely transparent IP traffic forwarding. I don't need to decrypt, cache or inspect any of the packets; I just want anything on port 443 to flow through the Linux box to the IIS box behind it as though the Linux box wasn't even there. Any help gratefully received... EDIT: Included full iptables config script.

    Read the article

  • Stepmania + KDE4 = sound problem

    - by picca
    I cannot manage to get KDE4 + stepmania working. If I run StepMania I always get: StepMania 3.9 Log starting 2010-12-24 14:52:48 Loading window: gtk OS: Linux ver 020636 Crash backtrace component: x86 custom backtrace Crash lookup component: dladdr Crash demangle component: cxa_demangle Runtime library: glibc 2.11.2 Threads library: NPTL 2.11.2 TLS is available ALSA: Advanced Linux Sound Architecture Driver Version 1.0.23. ALSA Driver: 0: HDA ATI SB [SB], device 0: STAC92xx Analog [STAC92xx Analog], 0/1 subdevices avail ALSA Driver: 0: HDA ATI SB [SB], device 1: STAC92xx Digital [STAC92xx Digital], 1/1 subdevices avail Couldn't load driver ALSA: dsnd_pcm_open(hw:0): Device or resource busy Mixing 0.000000 ahead in 0 Mix() calls Couldn't load driver ALSA-sw: dsnd_pcm_open(hw:0): Device or resource busy Mixing 0.000000 ahead in 0 Mix() calls Couldn't load driver OSS: RageSound_OSS: Couldn't open /dev/dsp: Device or resource busy Language: english Theme: default Error: Couldn't find a sound driver that works I found that in StepMania/Data/StepMania.ini I should add following line: SoundDevice=default That enables me to run StepMania, but I don't have any sound. Which is pretty bad for an application like this one. I'm quite sure that the problem is in phonon that is blocking the audio device to which StepMania needs to access directly. I think that I can fix this if I run other (lighter) window-manager than KDE4. But that is not a solution occasional linux user. Do I have any chance to get StepMania under KDE4 completely working?

    Read the article

  • DNS lookup fails when with all the MAC workstations

    - by user39564
    Hi, I am having this insane problem. We are mac-heavy users. Around 10 workstations, one Xserve server, two windows workstation and one Linux (me). Last year I added an A record to our domain's DNS. However we had to change that a few months ago to a new IP. But all the Mac workstations fail to resolve the proper DNS and they still resolve to the old IP, even after 2 months. On both the windows workstation and my linux box a simple nslookup resolves to proper IP. However, on ALL the mac workstation, dig and nslookup report the old IP address. From my linux workstation: jp@lo:~$ nslookup - 208.67.222.222 client.xyz.com Server: 208.67.222.222 Address: 208.67.222.222#53 Non-authoritative answer: Name: client.xyz.com Address: 68.71.40.xx But when I am trying the exact same command from any Mac workstation, I get the old IP: $ nslookup - 208.67.222.222 client.xyz.com Server: 208.67.222.222 Address: 208.67.222.222#53 Non-authoritative answer: Name: client.xyz.com Address: 98.143.155.xx The strange thing is that this only happens in our internal network. No problem from home nor from another server. I did try to flush the DNS, don't worry. It did not help. I am starting to wonder if my router (OpenWRT) or Mac OS X Server is not in some way spoofing the DNS request and thus acting as a cache. Any suggestions/comments would be grateful. Thank you, JP

    Read the article

  • Configure samba server for Unix group

    - by Bird Jaguar IV
    I'm trying to set up a samba server with access for users in the Linux (RHEL 6) "wheel" group. I am basing smb.conf off of the example here where it goes through the [accounting] example. In my smb.conf I have [tmp] comment = temporary files path = /var/share valid users = @wheel read only = No create mask = 0664 directory mask = 02777 max connections = 0 (rest of the output from $ testparm /etc/samba/smb.conf is here). And groups `whoami` returns user01 : wheel. When I use the following command from another machine (Mac OS) as the Linux user (user01): $ smbclient -L NETBIOSNAME/tmp it asks for a password, I hit return without a password, and get: Enter user01's password: Anonymous login successful Domain=[DOMAIN] OS=[Unix] Server=[Samba 3.6.9-151.el6_4.1] Sharename Type Comment --------- ---- ------- tmp Disk temporary files IPC$ IPC IPC Service (Samba Server Version 3.6.9-151.el6_4.1) But when I try $ smbclient //NETBIOSNAME/tmp I try entering the password I use for the Linux login, and get a bunch of stuff logged, including check_sam_security: Couldn't find user 'user01' in passdb. ... session setup failed: NT_STATUS_LOGON_FAILURE (I can give more logging information if it would be helpful.) I can't find a reference to more steps I need to add group users in the resource. Should I be manually adding samba users from the group somehow? Thank you

    Read the article

  • How do I copy files between harddrives on Ubuntu CLI?

    - by ed209
    I have a dedicated server with a 120gb main ssd. The server happens to come with a couple of 3000GB hard drives. I'd like to use them to back up my main drive. Preferably, I'd like one as an exact copy of the main SSD and the other with incremental backups of the mysql database and a user uploads file. These are the drives I have Disk /dev/sda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000f2e18 Device Boot Start End Blocks Id System /dev/sda1 2048 4196352 2097152+ 83 Linux /dev/sda2 4198400 5246976 524288+ 83 Linux /dev/sda3 5249024 234441647 114596312 83 Linux Disk /dev/sdb: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/sdb doesn't contain a valid partition table Disk /dev/sdc: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/sdc doesn't contain a valid partition table The first problem I have, is that I have no idea how to copy from one drive to another. Kind of embarrassing I know, but I don't know where to start. I'm thinking of this in terms of Mac OS cli where I'm able to copy between /Volumes - is there an equivalent? (there is nothing under /mnt or /media)

    Read the article

  • Puzzling TCP performance over 3G / UMTS

    - by lemonsqueeze
    I'm using 3G as my primary internet connection, and TCP over this thing is getting more puzzling every day. For example: Downloading from kernel.org is crazy fast: $wget http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.6.8.tar.bz2 increases to ~500kB/s after a few secs ! Some servers are incredibly slow, for instance www.graphic-pc.com:Same thing, downloading a big file with wget it starts at ~30kB/s for a split second, then collapses to 5-10k or even worse. Web browsing is decent but somewhat unreliable. Randomly, a page will take really long to load or even fail to load, but a reload can succeed almost immediately. Now, by chance i started playing with OpenVPN over UDP on top of the 3G connection, and OMG suddenly everything's extremely fast !Same www.graphic-pc.com now shoots at 100-200kB/s ! What's going on here ??? How come it is so much better with the VPN than without ?? And why does graphic-pc.com crawl when kernel.org flies ?Something to do with my tcp stack (or the server), or some buggy router in between ?? Notes: Setup is laptop running Ubuntu Lucid and a Huawei 3G dongle (So direct pppd connection). I can reproduce this pretty much any time during the day and I'm not moving, so it's clearly not cell environment or internet congestion. (although kernel.org without VPN sometimes does worse in the evening, 60kB or so - but still 500kB with VPN !) For 2) wireshark shows retransmitted packets, dup ack's, even out of order sometimes. I've tried playing with different /proc/sys/net/ipv4 parameters (tcp_rmem, window_scaling, tcp_congestion...) doesn't seem to make a difference. Update: Tried under windows 7 (no VPN) with some interesting results: tcp settings : default tcp_optimizer kernel.org : 10 kB/s 20 kB/s graphic-pc.com: 8 kB/s 70 kB/s ! tcp_optimizer turned on ctcp among other things. Have to check what os graphic-pc.com is running, my bet is linux's tcp_westwood and ms ctcp don't mix well here...

    Read the article

  • Why is my rsync so slow compared to pure cp or even scp?

    - by nfm
    I'm transfering the files from Linux to Windows 7 via a mounted share (the share is mounted from Windows on Linux).. I'm copying lots of data (i.e. nearly a TB) from the old to the new machine within my LAN. I'm unfortunate enough already that I only have 100MBit. Naturally I blindly used rsync but already wondered after a day why it feels so slow. Enabling the progress meter showed my a transfer rate of about 2MBit/s . So I took a reasonable big file (800MB) and tracked the transfer timing: cp : 05:33 scp (*): 06:33 rsync : 21:51 *) scp via localhost to the same Linux machine directly onto the share; completely useless but provided a progress meter The tests were as simple as (cp|scp|rsync) <source> <destination> No special arguments except host/port for scp. I even tried the -W switch for rsync but cancelled after ten minutes. rsync is 3.0.3 running on Lenny. To be able to interrupt the copy process anytime and resume lead me to rsync, but now I think I seriously need to reconsider this requirement. How's such a big difference possible?

    Read the article

  • Dealing with upgrade of libevent on Amazon AWS

    - by Dreen
    I am building an application (in Python) on Amazon EC2 that has a following dependency chain: gevent-websocket ---> gevent ---> libevent The last one (libevent) got upgraded on Sunday and my server is now generating this error: (...) File "/usr/lib/python2.6/site-packages/gevent-0.13.7-py2.6-linux-x86_64.egg/gevent/__init__.py", line 41, in <module> from gevent import core ImportError: libevent-1.4.so.2: cannot open shared object file: No such file or directory Not wanting to spend much time on the issue, I tried to mitigate it by creating a symlink to an always-recent version: $ sudo ln -s /usr/lib64/libevent.so /usr/lib64/libevent-1.4.so.2 But it didn't quite work: (...) File "/usr/lib/python2.6/site-packages/gevent-0.13.7-py2.6-linux-x86_64.egg/gevent/__init__.py", line 41, in <module> from gevent import core ImportError: /usr/lib/python2.6/site-packages/gevent-0.13.7-py2.6-linux-x86_64.egg/gevent/core.so: undefined symbol: current_base I am a bit stumped as to how to proceed. Should I create more symlinks? To what? Or is there a better way to solve this problem... PS. For the record I am using Amazon AMI.

    Read the article

  • Use old raid drive as boot device without data loss

    - by Gabriel
    There were two disks in sw-raid. There were /dev/md1 as swap, /dev/md2 as boot and a /dev/md3 with ext4. The sw-raid was disabled by stopping and removing mdadm and then zeroing the superblock on each /dev/mdX partition with: sudo mdadm --zero-superblock /dev/sda1 sudo mdadm --zero-superblock /dev/sda2 sudo mdadm --zero-superblock /dev/sda3 In the disk that is the first boot device, I don't know if it's relevant, the system type of each partition was set back from fd to 82 or 83 with fdisk, /etc/fstab was updated, changing /dev/mdX to /dev/sdaX, and grub was reinstalled on the boot partition (/dev/sda2) with grub-instal. But the system wont boot. What else should I do to use this disk as the boot device without reinstall or data loss? Current output of fdisk Device Boot Start End Blocks Id System /dev/sda1 2048 33556480 16777216+ 82 Linux swap / Solaris /dev/sda2 * 33558528 34607104 524288+ 83 Linux /dev/sda3 34609152 3907027120 1936208984+ 83 Linux With it doesn't boot I mean that it stops in the grub console (with the grub> symbol). A ls command says: (hd0) (hd0,msdos3) (hd0,msdos2) (hd0,msdos1) (hd1) (hd1,msdos1) It's weird because hd1 was formatted with ext4...

    Read the article

  • Advice on cloning disk

    - by hks
    I'm going to buy a second disk for backup, the same size as my laptops. I want to mount it in a casing via usb and backup an entire hdd every soemtime. That's because I want the posibility to just switch drives in case of something goes wrong. I'm using Linux and obviously the right tool seems to be dd. The thing is that my laptop drive has a speed of around 50-70 MB/s and usb 2.0 is 57 MB/s. So to copy my 250GB disk should take me more than 1 hour if I'm lucky. I can't wait this much. I want some differential backup. I read one of JWZ articles. In it he gives more details for using rsync on Mac. He writes that there is possibility of making rsync'ed disk bootable. So my question is: how to make rsync'ed hdd bootable under Linux or are there other 'quick backup' tools for Linux that would allow me to just swap drives? Or should I just stick to dd :( ?

    Read the article

  • How to use non-free drivers during debian install

    - by blokeley
    I'm trying to install debian stable using unetbootin. The install process fails with "network autoconfiguration failed", probably due to the ethernet driver not working. My Lenovo U350 has a Broadcom BCM57780 which does not seem to be supported out-of-the-box: there are various bug reports here, here and here, but I don't know if the fix has made it into debian (6) stable. One discussion says that you have to use an ethernet driver from the firmware-linux-nonfree package. I'm not sure that this is correct because the BCM57780 is not in the list of drivers in firmware-linux-nonfree. The specific question tree is: Is BCM57780 supported in debian stable? If so, what could be wrong? Should I install debian unstable instead? If not, do I need to use firmware-linux-nonfree during installation and, if so, how do I do this? Please note: I've used ubuntu and debian loads in the past but please post line-by-line guidance rather than some cryptic abbreviation of any instructions. Thanks in advance for any help. Updates: Debian stable with non-free drivers did not work. Debian unstable (free drivers only) did not work. Tried loading firmware-iwlwifi_0.28_all.deb from another USB stick to get wireless working rather than BCM57780. The .deb file was found but the network configuration still failed! That's it, I'm giving up. Unfortunately I'll use ubuntu even though the Unity user interface will be very unstable for the next couple of years :(

    Read the article

  • Using a degrading corrupted hard disk with a brand new one. Is this ok?

    - by EApubs
    My old 500 GB hard drive started to give bad sectors. Its slowly going down. So, I bought a new 1TB Seagate drive. I first attached the 500GB drive as the first primary drive and installed Windows. I want Windows boot loader to be placed in the old drive so it won't conflict with the Linux system. But the actual Windows system (Including the C drive) is placed on my new hard drive. After this, I attached the new drive as the primary and installed Linux. Now if I want to re install windows, I can do it without any issues by simply setting the old drive as the primary. So the Linux system will be untouched. But is it a good idea to set things like this? Will the old degrading drive have an impact on the new one? The old drive is slower than the new one. Won't I be able to get the maximum speed out of the new drive even when its used to install everything (including the OS)? PS : When I ran the Windows Experience Index, I was using the old drive as the primary. Did it got the hard drive ratings from the old drive? What if I run it now with the new drive as the primary?

    Read the article

  • Grub Installation Failed: Fatal Error ... now what I do?

    - by eklavya
    I know there are some threads that touch this but I feel I have done something uniquely stupid. hence the post and plea for help. I am a beginner @ Linux. So I have a PC with a HDD (hard disk drive) and SSD (solid state drive) It was running Linux Mint /dev/sda1 - HDD Partition 1 - 2 TB (mounted this is /home /dev/sda2 - HDD Partition 2 - 1 TB (separate back up drive, i was backing up files to this) /dev/sdb1 - SSD Partition 1 - 100 GB (OS) /dev/sdb2 - SSD Partition 2 - 20 GB (Swap) The operating system was Linux Mint and was installed on the /dev/sdb1 i.e the solid state drive. I had partitioned off the sda into 2 TB and 1TB and presented the 2 TB as the /home to the OS. Anyway last night I decided to make a return to Ubuntu via the path of Elementary OS. Everything went fine with the install until it stated that GRUB installed failed and this was a Fatal error (no kidding I said). No I am stuck. I have definitely done something wrong and don't know what it is... My biggest pain is the files on the /dev/sda2. I want to save these before I try something drastic like wiping off the /dev/sda completely. So I have the following questions... Can I use a liveCD USB to save these files ? I can see the /dev/sda2 but was unable to access the files in the liveCD last not least ... how do I fix the main issue here. Why could the OS not install GRUB 2b... why is my SSD the /dev/sdb ... and not /dev/sda. Does that have something to do with it that my master boot record sits on the HDD /dev/sda and not /dev/sdb

    Read the article

  • apt unable to install particular version of package (but gives no error)

    - by Arc2009
    I'd like to install particular version of libstd++6 with following command: # apt-get install libstdc++6=4.9.0-8 -V Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libstdc++6 (4.8.2-16) 0 upgraded, 0 newly installed, 0 to remove and 216 not upgraded. It gives no error, but apt keeps version that was already installed. And also it refers to this package as "extra". There's no apt preferences set in /etc/apt/preferences.d. And the desirable version is definetely available through our local mirror. (If I try to run "apt-get download libstdc++6=4.9.0-8" it will download exactly desirable version.) System info: # cat /etc/issue.net "Debian GNU/Linux jessie/sid" # uname -a Linux www27 3.13-1-amd64 #1 SMP Debian 3.13.7-1 (2014-03-25) x86_64 GNU/Linux. # dpkg -l |egrep -i "apt|dpkg" ii apt 0.9.16.1 amd64 commandline package manager ii dpkg 1.17.6 amd64 Debian package management system Any suggestions?

    Read the article

  • This is the End of Business as Usual...

    - by Michael Snow
    This week, we'll be hosting our last Social Business Thought Leader Series Webcast for 2012. Our featured guest this week will be Brian Solis of Altimeter Group. As we've been going through the preparations for Brian's webcast, it became very clear that an hour's time is barely scraping the surface of the depth of Brian's insights and analysis. Accordingly, in the spirit of sharing Brian's perspective for all of our readers, we'll be featuring guest posts all this week pulled from Brian's larger collection of blog postings on his own website. If you like what you've read here this week, we highly recommend digging deeper into his tome of wisdom. Guest Post by Brian Solis, Analyst, Altimeter Group as originally featured on his site with the minor change of the video addition at the beginning of the post. This is the End of Business as Usual and the Beginning of a New Era of Relevance - Brian Solis, Principal Analyst, Altimeter Group The Times They Are A-Changin’ Come gather ’round people Wherever you roam And admit that the waters Around you have grown And accept it that soon You’ll be drenched to the bone If your time to you Is worth savin’ Then you better start swimmin’ Or you’ll sink like a stone For the times they are a-changin’. - Bob Dylan I’m sure you are wondering why I chose lyrics to open this article. If you skimmed through them, stop here for a moment. Go back through the Dylan’s words and take your time. Carefully read, and feel, what it is he’s saying and savor the moment to connect the meaning of his words to the challenges you face today. His message is as important and true today as it was when they were first written in 1964. The tide is indeed once again turning. And even though the 60s now live in the history books, right here, right now, Dylan is telling us once again that this is our time to not only sink or swim, but to do something amazing. This is your time. This is our time. But, these times are different and what comes next is difficult to grasp. How people communicate. How people learn and share. How people make decisions. Everything is different now. Think about this…you’re reading this article because it was sent to you via email. Yet more people spend their online time in social networks than they do in email. Duh. According to Nielsen, of the total time spent online 22.5% are connecting and communicating in social networks. To put that in perspective, the time spent in the likes of Facebook, Twitter, and Youtube is greater than online gaming at 9.8%, email at 7.6% and search at 4%. Imagine for a moment if you and I were connected to one another in Facebook, which just so happens to be the largest social network in the world. How big? Well, Facebook is the size today of the entire Internet in 2004. There are over 1 billion people friending, Liking, commenting, sharing, and engaging in Facebook…that’s roughly 12% of the world’s population. Twitter has over 200 million users. Ever hear of tumblr? More time is spent on this popular microblogging community than Twitter. The point is that the landscape for communication and all that’s affected by human interaction is profoundly different than how you and I learned, shared or talked to one another yesterday. This transformation is only becoming more pervasive and, it’s not going back. Survival of the Fitting But social media is just one of the channels we can use to reach people. I must be honest. I’m as much a part of tomorrow as I am of yesteryear. It’s why I spend all of my time researching the evolution of media and its impact on business and culture. Because of you, I share everything I learn in newsletters, emails, blogs, Youtube videos, and also traditional books. I’m dedicated to helping everyone not only understand, but grasp the change that’s before you. Technologies such as social, mobile, virtual, augmented, et al compel us adapt our story and value proposition and extend our reach to be part of communities we don’t realize exist. The people who will keep you in business or running tomorrow are the very people you’re not reaching today. Before you continue to read on, allow me to clarify my point of view. My inspiration for writing this is to help you augment, not necessarily replace, the programs you’re running today. We must still reach those whom matter to us in the ways they prefer to be engaged. To reach what I call the connected consumer of Geneeration-C we must too reach them in the ways they wish to be engaged. And in all of my work, how they connect, talk to one another, influence others, and make decisions are not at all like the traditional consumers of the past. Nor are they merely the kids…the Millennial. Connected consumers are representative across every age group and demographic. As you can see, use of social networks, media sharing sites, microblogs, blogs, etc. equally span across Gen Y, Gen X, and Baby Boomers. The DNA of connected customers is indiscriminant of age or any other demographic for that matter. This is more about psychographics, the linkage of people through common interests (than it is their age, gender, education, nationality or level of income. Once someone is introduced to the marvels of connectedness, the sensation becomes a contagion. It touches and affects everyone. And, that’s why this isn’t going anywhere but normalcy. Social networking isn’t just about telling people what you’re doing. Nor is it just about generic, meaningless conversation. Today’s connected consumer is incredibly influential. They’re connected to hundreds and even thousands of other like-minded people. What they experiences, what they support, it’s shared throughout these networks and as information travels, it shapes and steers impressions, decisions, and experiences of others. For example, if we revisit the Nielsen research, we get an idea of just how big this is becoming. 75% spend heavily on music. How does that translate to the arts? I’d imagine the number is equally impressive. If 53% follow their favorite brand or organization, imagine what’s possible. Just like this email list that connects us, connections in social networks are powerful. The difference is however, that people spend more time in social networks than they do in email. Everything begins with an understanding of the “5 W’s and H.E.” – Who, What, When, Where, How, and to What Extent? The data that comes back tells you which networks are important to the people you’re trying to reach, how they connect, what they share, what they value, and how to connect with them. From there, your next steps are to create a community strategy that extends your mission, vision, and value and it align it with the interests, behavior, and values of those you wish to reach and galvanize. To help, I’ve prepared an action list for you, otherwise known as the 10 Steps Toward New Relevance: 1. Answer why you should engage in social networks and why anyone would want to engage with you 2. Observe what brings them together and define how you can add value to the conversation 3. Identify the influential voices that matter to your world, recognize what’s important to them, and find a way to start a dialogue that can foster a meaningful and mutually beneficial relationship 4. Study the best practices of not just organizations like yours, but also those who are successfully reaching the type of people you’re trying to reach – it’s benching marking against competitors and benchmarking against undefined opportunities 5. Translate all you’ve learned into a convincing presentation written to demonstrate tangible opportunity to your executive board, make the case through numbers, trends, data, insights – understanding they have no idea what’s going on out there and you are both the scout and the navigator (start with a recommended pilot so everyone can learn together) 6. Listen to what they’re saying and develop a process to learn from activity and adapt to interests and steer engagement based on insights 7. Recognize how they use social media and innovate based on what you observe to captivate their attention 8. Align your objectives with their objectives. If you’re unsure of what they’re looking for…ask 9. Invest in the development of content, engagement 10. Build a community, invest in values, spark meaningful dialogue, and offer tangible value…the kind of value they can’t get anywhere else. Take advantage of the medium and the opportunity! The reality is that we live and compete in a perpetual era of Digital Darwinism, the evolution of consumer behavior when society and technology evolve faster than our ability to adapt. This is why it’s our time to alter our course. We must connect with those who are defining the future of engagement, commerce, business, and how the arts are appreciated and supported. Even though it is the end of business as usual, it is the beginning of a new age of opportunity. The consumer revolution is already underway, and the question is: How do you better understand the role you play in this production as a connected or social consumer as well as business professional? Again, this is your time to define a new era of engagement and relevance. Originally written for The National Arts Marketing Project Connect with Brian via: Twitter | LinkedIn | Facebook | Google+ --- Note from Michael: If you really like this post above - check out Brian's TEDTalk and his thought process for preparing it in this post: 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} http://www.briansolis.com/2012/10/tedtalk-reinventing-consumer-capitalism-screw-business-as-usual/

    Read the article

  • SQL SERVER – Weekly Series – Memory Lane – #039

    - by Pinal Dave
    Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 FQL – Facebook Query Language Facebook list following advantages of FQL: Condensed XML reduces bandwidth and parsing costs. More complex requests can reduce the number of requests necessary. Provides a single consistent, unified interface for all of your data. It’s fun! UDF – Get the Day of the Week Function The day of the week can be retrieved in SQL Server by using the DatePart function. The value returned by the function is between 1 (Sunday) and 7 (Saturday). To convert this to a string representing the day of the week, use a CASE statement. UDF – Function to Get Previous And Next Work Day – Exclude Saturday and Sunday While reading ColdFusion blog of Ben Nadel Getting the Previous Day In ColdFusion, Excluding Saturday And Sunday, I realize that I use similar function on my SQL Server Database. This function excludes the Weekends (Saturday and Sunday), and it gets previous as well as next work day. Complete Series of SQL Server Interview Questions and Answers Data Warehousing Interview Questions and Answers – Introduction Data Warehousing Interview Questions and Answers – Part 1 Data Warehousing Interview Questions and Answers – Part 2 Data Warehousing Interview Questions and Answers – Part 3 Data Warehousing Interview Questions and Answers Complete List Download 2008 Introduction to Log Viewer In SQL Server all the windows event logs can be seen along with SQL Server logs. Interface for all the logs is same and can be launched from the same place. This log can be exported and filtered as well. DBCC SHRINKFILE Takes Long Time to Run If you are DBA who are involved with Database Maintenance and file group maintenance, you must have experience that many times DBCC SHRINKFILE operations takes a long time but any other operations with Database are relatively quicker. mssqlsystemresource – Resource Database The purpose of resource database is to facilitates upgrading to the new version of SQL Server without any hassle. In previous versions whenever version of SQL Server was upgraded all the previous version system objects needs to be dropped and new version system objects to be created. 2009 Puzzle – Write Script to Generate Primary Key and Foreign Key In SQL Server Management Studio (SSMS), there is no option to script all the keys. If one is required to script keys they will have to manually script each key one at a time. If database has many tables, generating one key at a time can be a very intricate task. I want to throw a question to all of you if any of you have scripts for the same purpose. Maximizing View of SQL Server Management Studio – Full Screen – New Screen I had explained the following two different methods: 1) Open Results in Separate Tab - This is a very interesting method as result pan shows up in a different tab instead of the splitting screen horizontally. 2) Open SSMS in Full Screen - This works always and to its best. Not many people are aware of this method; hence, very few people use it to enhance performance. 2010 Find Queries using Parallelism from Cached Plan T-SQL script gets all the queries and their execution plan where parallelism operations are kicked up. Pay attention there is TOP 10 is used, if you have lots of transactional operations, I suggest that you change TOP 10 to TOP 50 This is the list of the all the articles in the series of computed columns. SQL SERVER – Computed Column – PERSISTED and Storage This article talks about how computed columns are created and why they take more storage space than before. SQL SERVER – Computed Column – PERSISTED and Performance This article talks about how PERSISTED columns give better performance than non-persisted columns. SQL SERVER – Computed Column – PERSISTED and Performance – Part 2 This article talks about how non-persisted columns give better performance than PERSISTED columns. SQL SERVER – Computed Column and Performance – Part 3 This article talks about how Index improves the performance of Computed Columns. SQL SERVER – Computed Column – PERSISTED and Storage – Part 2 This article talks about how creating index on computed column does not grow the row length of table. SQL SERVER – Computed Columns – Index and Performance This article summarized all the articles related to computed columns. 2011 SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Data Warehousing Concepts – Day 21 of 31 What is Data Warehousing? What is Business Intelligence (BI)? What is a Dimension Table? What is Dimensional Modeling? What is a Fact Table? What are the Fundamental Stages of Data Warehousing? What are the Different Methods of Loading Dimension tables? Describes the Foreign Key Columns in Fact Table and Dimension Table? What is Data Mining? What is the Difference between a View and a Materialized View? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Data Warehousing Concepts – Day 22 of 31 What is OLTP? What is OLAP? What is the Difference between OLTP and OLAP? What is ODS? What is ER Diagram? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Data Warehousing Concepts – Day 23 of 31 What is ETL? What is VLDB? Is OLTP Database is Design Optimal for Data Warehouse? If denormalizing improves Data Warehouse Processes, then why is the Fact Table is in the Normal Form? What are Lookup Tables? What are Aggregate Tables? What is Real-Time Data-Warehousing? What are Conformed Dimensions? What is a Conformed Fact? How do you Load the Time Dimension? What is a Level of Granularity of a Fact Table? What are Non-Additive Facts? What is a Factless Facts Table? What are Slowly Changing Dimensions (SCD)? SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Data Warehousing Concepts – Day 24 of 31 What is Hybrid Slowly Changing Dimension? What is BUS Schema? What is a Star Schema? What Snow Flake Schema? Differences between the Star and Snowflake Schema? What is Difference between ER Modeling and Dimensional Modeling? What is Degenerate Dimension Table? Why is Data Modeling Important? What is a Surrogate Key? What is Junk Dimension? What is a Data Mart? What is the Difference between OLAP and Data Warehouse? What is a Cube and Linked Cube with Reference to Data Warehouse? What is Snapshot with Reference to Data Warehouse? What is Active Data Warehousing? What is the Difference between Data Warehousing and Business Intelligence? What is MDS? Explain the Paradigm of Bill Inmon and Ralph Kimball. SQL SERVER – Azure Interview Questions and Answers – Guest Post by Paras Doshi – Day 25 of 31 Paras Doshi has submitted 21 interesting question and answers for SQL Azure. 1.What is SQL Azure? 2.What is cloud computing? 3.How is SQL Azure different than SQL server? 4.How many replicas are maintained for each SQL Azure database? 5.How can we migrate from SQL server to SQL Azure? 6.Which tools are available to manage SQL Azure databases and servers? 7.Tell me something about security and SQL Azure. 8.What is SQL Azure Firewall? 9.What is the difference between web edition and business edition? 10.How do we synchronize On Premise SQL server with SQL Azure? 11.How do we Backup SQL Azure Data? 12.What is the current pricing model of SQL Azure? 13.What is the current limitation of the size of SQL Azure DB? 14.How do you handle datasets larger than 50 GB? 15.What happens when the SQL Azure database reaches Max Size? 16.How many databases can we create in a single server? 17.How many servers can we create in a single subscription? 18.How do you improve the performance of a SQL Azure Database? 19.What is code near application topology? 20.What were the latest updates to SQL Azure service? 21.When does a workload on SQL Azure get throttled? SQL SERVER – Interview Questions and Answers – Guest Post by Malathi Mahadevan – Day 26 of 31 Malachi had asked a simple question which has several answers. Each answer makes you think and ponder about the reality of the IT world. Look at the simple question – ‘What is the toughest challenge you have faced in your present job and how did you handle it’? and its various answers. Each answer has its own story. SQL SERVER – Interview Questions and Answers – Guest Post by Rick Morelan – Day 27 of 31 Rick Morelan of Joes2Pros has written an excellent blog post on the subject how to find top N values. Most people are fully aware of how the TOP keyword works with a SELECT statement. After years preparing so many students to pass the SQL Certification I noticed they were pretty well prepared for job interviews too. Yes, they would do well in the interview but not great. There seemed to be a few questions that would come up repeatedly for almost everyone. Rick addresses similar questions in his lucid writing skills. 2012 Observation of Top with Index and Order of Resultset SQL Server has lots of things to learn and share. It is amazing to see how people evaluate and understand different techniques and styles differently when implementing. The real reason may be absolutely different but we may blame something totally different for the incorrect results. Read the blog post to learn more. How do I Record Video and Webcast How to Convert Hex to Decimal or INT Earlier I asked regarding a question about how to convert Hex to Decimal. I promised that I will post an answer with Due Credit to the author but never got around to post a blog post around it. Read the original post over here SQL SERVER – Question – How to Convert Hex to Decimal. Query to Get Unique Distinct Data Based on Condition – Eliminate Duplicate Data from Resultset The natural reaction will be to suggest DISTINCT or GROUP BY. However, not all the questions can be solved by DISTINCT or GROUP BY. Let us see the following example, where a user wanted only latest records to be displayed. Let us see the example to understand further. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Should we hire someone who writes C in Perl?

    - by paxdiablo
    One of my colleagues recently interviewed some candidates for a job and one said they had very good Perl experience. Since my colleague didn't know Perl, he asked me for a critique of some code written (off-site) by that potential hire, so I had a look and told him my concerns (the main one was that it originally had no comments and it's not like we gave them enough time). However, the code works so I'm loathe to say no-go without some more input. Another concern is that this code basically looks exactly how I'd code it in C. It's been a while since I did Perl (and I didn't do a lot, I'm more a Python bod for quick scripts) but I seem to recall that it was a much more expressive language than what this guy used. I'm looking for input from real Perl coders, and suggestions for how it could be improved (and why a Perl coder should know that method of improvement). You can also wax lyrical about whether people who write one language in a totally different language should (or shouldn't be hired). I'm interested in your arguments but this question is primarily for a critique of the code. The spec was to successfully process a CSV file as follows and output the individual fields: User ID,Name , Level,Numeric ID pax, Pax Morgan ,admin,0 gt," Turner, George" rubbish,user,1 ms,"Mark \"X-Men\" Spencer","guest user",2 ab,, "user","3" The output was to be something like this (the potential hire's code actually output this): User ID,Name , Level,Numeric ID: [User ID] [Name] [Level] [Numeric ID] pax, Pax Morgan ,admin,0: [pax] [Pax Morgan] [admin] [0] gt," Turner, George " rubbish,user,1: [gt] [ Turner, George ] [user] [1] ms,"Mark \"X-Men\" Spencer","guest user",2: [ms] [Mark "X-Men" Spencer] [guest user] [2] ab,, "user","3": [ab] [] [user] [3] Here is the code they submitted: #!/usr/bin/perl # Open file. open (IN, "qq.in") || die "Cannot open qq.in"; # Process every line. while (<IN>) { chomp; $line = $_; print "$line:\n"; # Process every field in line. while ($line ne "") { # Skip spaces and start with empty field. if (substr ($line,0,1) eq " ") { $line = substr ($line,1); next; } $field = ""; $minlen = 0; # Detect quoted field or otherwise. if (substr ($line,0,1) eq "\"") { $line = substr ($line,1); $pastquote = 0; while ($line ne "") { # Special handling for quotes (\\ and \"). if (length ($line) >= 2) { if (substr ($line,0,2) eq "\\\"") { $field = $field . "\""; $line = substr ($line,2); next; } if (substr ($line,0,2) eq "\\\\") { $field = $field . "\\"; $line = substr ($line,2); next; } } # Detect closing quote. if (($pastquote == 0) && (substr ($line,0,1) eq "\"")) { $pastquote = 1; $line = substr ($line,1); $minlen = length ($field); next; } # Only worry about comma if past closing quote. if (($pastquote == 1) && (substr ($line,0,1) eq ",")) { $line = substr ($line,1); last; } $field = $field . substr ($line,0,1); $line = substr ($line,1); } } else { while ($line ne "") { if (substr ($line,0,1) eq ",") { $line = substr ($line,1); last; } if ($pastquote == 0) { $field = $field . substr ($line,0,1); } $line = substr ($line,1); } } # Strip trailing space. while ($field ne "") { if (length ($field) == $minlen) { last; } if (substr ($field,length ($field)-1,1) eq " ") { $field = substr ($field,0, length ($field)-1); next; } last; } print " [$field]\n"; } } close (IN);

    Read the article

< Previous Page | 643 644 645 646 647 648 649 650 651 652 653 654  | Next Page >