Search Results

Search found 2064 results on 83 pages for '802 11g'.

Page 65/83 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• RAID1 rebuild fails due to disk errors

  - by overlord_tm

  Quick info: Dell R410 with 2x500GB drives in RAID1 on H700 Adapter Recently one of drives in RAID1 array on server failed, lets call it Drive 0. RAID controller marked it as fault and put it offline. I replaced faulty disk with new one (same series and manufacturer, just bigger) and configured new disk as hot spare. Rebuild from Drive1 started immediately and after 1.5 hour I got message that Drive 1 failed. Server was unresponsive (kernel panic) and required reboot. Given that half hour before this error rebuild was at about 40%, I estimated that new drive is not in sync yet and tried to reboot just with Drive 1. RAID controller complained a bit about missing RAID arrays, but it found foreign RAID array on Drive 1 and I imported it. Server booted and it runs (from degraded RAID). Here is SMART data for disks. Drive 0 (the one that failed first) ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1 3 Spin_Up_Time POS--K 142 142 021 - 3866 4 Start_Stop_Count -O--CK 100 100 000 - 12 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 086 086 000 - 10432 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 11 192 Power-Off_Retract_Count -O--CK 200 200 000 - 10 193 Load_Cycle_Count -O--CK 200 200 000 - 1 194 Temperature_Celsius -O---K 112 106 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 198 000 - 3 And Drive 1 (the drive which was reported healthy from controller until rebuild was attempted) ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 35 3 Spin_Up_Time POS--K 143 143 021 - 3841 4 Start_Stop_Count -O--CK 100 100 000 - 12 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 086 086 000 - 10455 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 11 192 Power-Off_Retract_Count -O--CK 200 200 000 - 10 193 Load_Cycle_Count -O--CK 200 200 000 - 1 194 Temperature_Celsius -O---K 114 105 000 - 29 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 3 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 In extended error logs from SMART I found: Drive 0 has only one error Error 1 [0] occurred at disk power-on lifetime: 10282 hours (428 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 18 00 00 00 6a 24 20 40 00 Error: IDNF at LBA = 0x006a2420 = 6956064 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 60 00 f8 00 00 00 6a 24 20 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 18 00 60 00 00 00 6a 24 00 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 80 00 58 00 00 00 6a 23 80 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 68 00 50 00 00 00 6a 23 18 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 10 00 10 00 00 00 6a 23 00 40 00 17d+20:25:18.104 WRITE FPDMA QUEUED But Drive 1 has 883 errors. I see only few last ones and all errors I can see look like this: Error 883 [18] occurred at disk power-on lifetime: 10454 hours (435 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 51 00 80 00 00 39 97 19 c2 40 00 Error: AMNF at LBA = 0x399719c2 = 966203842 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:57.802 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:25:57.779 READ LOG EXT 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:55.704 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:25:55.681 READ LOG EXT 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:53.606 READ FPDMA QUEUED Given those errors, is there any way I can rebuild RAID back, or should I make backup, shutdown server, replace disks with new ones and restore it? What about if I dd faulty disk to new one from linux running on USB/CD? Also, if anyone have more experiences, what could be causes for those errors? Crappy controller or disks? Disks are about 1 year old, but it is pretty unbelievable to me that both would die within so short timespan.

  Read the article

• WPA2 authentication fails on Ubuntu 12.04 using Rosewill RNX-N1

  - by user94156

  Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. RNX-X1 works on other systems (including TV); also have 2 of 'em and tried each. Worth noting that I recently switched from Comcast to CenturyLink and so switched routers. The system connected successfully to previous router (Linksys EA4500) using WPA2. Would think it is the router (Actiontec C1000A) but all other devices (TV, iPad, Windows, Blackberry, and Squeezebox) connect ok. Would appreciate some diagnostic guidance and insight (phrased for a newbie!) Tests to date: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 00:e0:4d:30:40:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:ac00(size=256) memory:fdcff000-fdcfffff memory:fdb00000-fdb1ffff *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan1 serial: 00:02:6f:bd:30:a0 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-31-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn sudo lspci -v 00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Flags: 66MHz, fast devsel 00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1) Subsystem: Biostar Microtech Int'l Corp Device 820c Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd000000-fd0fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Capabilities: [8c] SATA HBA v1.0 Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci 00:0b.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0f.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:10.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fd100000-00000000fd1fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1406 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: Biostar Microtech Int'l Corp Device 2305 Flags: bus master, fast devsel, latency 0, IRQ 47 I/O ports at ac00 [size=256] Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdb00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 32-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 sudo rfkill list all 2: phy2: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• Windows 7 Machine Makes Router Drop -All- Wireless Connections [closed]

  - by Hammer Bro.

  Note: I accidentally originally posted this question over at SuperUser, and I still think the issue is caused by some low-level networking practice of Windows 7, but I think the expertise here would be more apt to figuring it out. Apologies for the cross-post. Some background: My home network consists of my Desktop, a two-month old Windows 7 (x64) machine which is online most frequently (N-spec), as well as three other Windows XP laptops (all G) that only connect every now and then (one for work, one for Netflix, and the other for infrequent regular laptop uses). I used to have a Belkin F5D8236-4 wireless router, and everything worked great. A week ago, however, I found out that the Belkin absolutely in no way would establish a VPN connection, something that has become important for work. So I bought a Netgear WNR3500v2/U/L. The wireless was acting a little sketchy at first for just the Windows 7 machine, but I thought it had something to do with 802.11N and I was in a hurry so I just fished up an ethernet cable and disabled the computer's wireless. It has now become apparent, though, that whenever the Windows 7 machine is connected to the router, all wireless connections become unstable. I was using my work laptop for a solid six hours today with no trouble, having multiple SSH connections open over VPN and streaming internet radio in the background. Then, within two minutes of turning on this Windows 7 box, I had lost all connectivity over the wireless. And I was two feet away from the router. The same sort of thing happens on all of the other laptops -- Netflix can be playing stuff all weekend, but if I come up here and do things on this (W7) computer, the streaming will be dead within ten minutes. So here are my basic observations: If the Windows 7 machine is off, then all connections will have a Signal Strength of Very Good or Excellent and a Speed of 48-54 Mbps for an indefinite amount of time. Shortly after the Windows 7 machine is turned on, all wireless connections will experience a consistent decline in Speed down to 1.0 Mbps, eventually losing their connection entirely. These machines will continue to maintain 70% signal strength, as observed by themselves and router. Once dropped, a wireless connection will have difficulty reconnecting. And, if a connection manages to become established, it will quickly drop off again. The Windows 7 machine itself will continue to function just fine if it's using a wired connection, although it will experience these same issues over the wireless. All of the drivers and firmwares are up to date, and this happened both with the stock Netgear firmware as well as the (current) DD-WRT. What I've tried: Making sure each computer is being assigned a distinct IP. (They are.) Disabling UPnP and Stateful Packet Inspection on the router. Disabling Network Sharing, SSDP Discovery, TCP/IP NetBios Helper and Computer Browser services on the Windows 7 machine. Disabling QoS Packet Scheduler, IPv6, and Link Layer Topology Discovery options on my ethernet controller (leaving only Client for Microsoft Networks, File and Printer Sharing, and IPv4 enabled). What I think: It seems awfully similar to the problems discussed in detail at http://social.msdn.microsoft.com/Forums/en/wsk/thread/1064e397-9d9b-4ae2-bc8e-c8798e591915 (which was both the most relevant and concrete information I could dig up on the internet). I still think that something the Windows 7 IP stack (or just Operating System itself) is doing is giving the router fits. However, I could be wrong, because I have two key differences. One is that most instances of this problem are reported as the entire router dying or restarting, and mine still works just fine over the wired connection. The other is that it's a new router, tested with both the factory firmware and the (I assume) well-maintained DD-WRT project. Even if Windows 7 is still secretly sending IPv6 packets or the TCP Window Scaling implementation that I hear Vista caused some trouble with (even though I've tried my best to disable anything fancy), this router should support those functions. I don't want to get a new or a replacement router unless someone can convince me that this is a defective unit. But the problem seems too specific and predictable by my instincts to be a hardware hiccup. And I don't want to deal with the inevitable problems that always seem to take half a day to resolve when getting a new router, since I'm frantically working (including tomorrow) to complete a project by next week's deadline. Plus, I think in the worst case scenario, I could keep this router connected directly to the modem, disable its wireless entirely, and connect the old Belkin to it directly. That should allow me to still use VPN (although I'll have to plug my work laptop directly into that router), and then maintain wireless connections for all of the other computers. But that feels so wrong to me. Anyone have any ideas what the cause and possible solution could be? Clarifications: The Windows 7 machine is directly connected via an ethernet cable to the router for everything above. But while it is online, all other computers' wireless connections become unusable. It is not an issue of signal strength or interference -- no other devices within scanning range are using Channel 1, and the problem will affect computers that are literally feet away from the router with 95% signal strength.

  Read the article

• Gateway setting is empty

  - by Dodi Jones

  This laptop hasn't been used in almost a year. It connected to the internet just fine last time used. Now it can't get on line. ipconfig:The Gateway setting for this computer is empty. Make sure your access point is working properly. Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Dodi>IPCONFIG /ALL Windows IP Configuration Host Name . . . . . . . . . . . . : 8A287A4ADEF0487 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : LAN-Express AS IEEE 802.11g miniPCI Adapter Physical Address. . . . . . . . . : 00-14-A4-72-37-E1 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.0.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.1.1 Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Intel(R) PRO/100 VE Network Connection Physical Address. . . . . . . . . : 00-01-4A-EF-A8-7D How do I fix this?

  Read the article

• WPA2 authentication fails using USB network devices (Linksys and Rosewill)

  - by Greg Youtz

  Decided to reduce the clutter in the house and replace a wired connection with a wireless one on my wife's system using USB network device Rosewill RNX-X1. I can see and connect to unprotected network, but WPA2 authentication repeatedly fails. Tried the same with a Linksys USB network adapter. Both failed to authenticate. Worth noting that I recently switched from Comcast to CenturyLink and so switched routers. The system connected successfully to previous router (Linksys EA4500) using WPA2. Would think it is the router (Actiontec C1000A) but all other devices (TV, iPad, Windows, Blackberry, and Squeezebox) connect ok. Would appreciate some diagnostic guidance and insight (phrased for a newbie!) Tests to date: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 01 serial: 00:e0:4d:30:40:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:47 ioport:ac00(size=256) memory:fdcff000-fdcfffff memory:fdb00000-fdb1ffff *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan1 serial: 00:02:6f:bd:30:a0 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-31-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn sudo lspci -v 00:00.0 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 Capabilities: [44] HyperTransport: Slave or Primary Interface Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed- 00:01.0 ISA bridge: NVIDIA Corporation MCP67 ISA Bridge (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 00:01.1 SMBus: NVIDIA Corporation MCP67 SMBus (rev a2) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: 66MHz, fast devsel, IRQ 11 I/O ports at fc00 [size=64] I/O ports at 1c00 [size=64] I/O ports at 1c40 [size=64] Capabilities: [44] Power Management version 2 Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:01.2 RAM memory: NVIDIA Corporation MCP67 Memory Controller (rev a2) Flags: 66MHz, fast devsel 00:02.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at fe02f000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:02.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe02e000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 USB controller: NVIDIA Corporation MCP67 OHCI USB 1.1 Controller (rev a2) (prog-if 10 [OHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fe02d000 (32-bit, non-prefetchable) [size=4K] Capabilities: [44] Power Management version 2 Kernel driver in use: ohci_hcd 00:04.1 USB controller: NVIDIA Corporation MCP67 EHCI USB 2.0 Controller (rev a2) (prog-if 20 [EHCI]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 Memory at fe02c000 (32-bit, non-prefetchable) [size=256] Capabilities: [44] Debug port: BAR=1 offset=0098 Capabilities: [80] Power Management version 2 Kernel driver in use: ehci_hcd 00:06.0 IDE interface: NVIDIA Corporation MCP67 IDE Controller (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: Biostar Microtech Int'l Corp Device 3409 Flags: bus master, 66MHz, fast devsel, latency 0 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] I/O ports at f000 [size=16] Capabilities: [44] Power Management version 2 Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 Audio device: NVIDIA Corporation MCP67 High Definition Audio (rev a1) Subsystem: Biostar Microtech Int'l Corp Device 820c Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 Memory at fe024000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:08.0 PCI bridge: NVIDIA Corporation MCP67 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: fd000000-fd0fffff Capabilities: [b8] Subsystem: NVIDIA Corporation Device cb84 Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- 00:09.0 IDE interface: NVIDIA Corporation MCP67 AHCI Controller (rev a2) (prog-if 85 [Master SecO PriO]) Subsystem: Biostar Microtech Int'l Corp Device 5407 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 I/O ports at 09f0 [size=8] I/O ports at 0bf0 [size=4] I/O ports at 0970 [size=8] I/O ports at 0b70 [size=4] I/O ports at dc00 [size=16] Memory at fe02a000 (32-bit, non-prefetchable) [size=8K] Capabilities: [44] Power Management version 2 Capabilities: [8c] SATA HBA v1.0 Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+ Kernel driver in use: ahci 00:0b.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fda00000-fdafffff Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd800000-fd8fffff Prefetchable memory behind bridge: 00000000fd700000-00000000fd7fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:0f.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00007000-00007fff Memory behind bridge: fd600000-fd6fffff Prefetchable memory behind bridge: 00000000fd500000-00000000fd5fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:10.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: fd400000-fd4fffff Prefetchable memory behind bridge: 00000000fd300000-00000000fd3fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:11.0 PCI bridge: NVIDIA Corporation MCP67 PCI Express Bridge (rev a2) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fd200000-fd2fffff Prefetchable memory behind bridge: 00000000fd100000-00000000fd1fffff Capabilities: [40] Subsystem: NVIDIA Corporation Device 0000 Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- Capabilities: [80] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Kernel driver in use: pcieport Kernel modules: shpchp 00:12.0 VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Biostar Microtech Int'l Corp Device 1406 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at fc000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at 80000000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: [80] HyperTransport: Host or Secondary Interface 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: [f0] Secure device <?> Kernel driver in use: k8temp Kernel modules: k8temp 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Subsystem: Biostar Microtech Int'l Corp Device 2305 Flags: bus master, fast devsel, latency 0, IRQ 47 I/O ports at ac00 [size=256] Memory at fdcff000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at fdb00000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Capabilities: [48] Vital Product Data Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+ Capabilities: [60] Express Endpoint, MSI 00 Capabilities: [84] Vendor Specific Information: Len=4c <?> Capabilities: [100] Advanced Error Reporting Capabilities: [12c] Virtual Channel Capabilities: [148] Device Serial Number 32-00-00-00-10-ec-81-68 Capabilities: [154] Power Budgeting <?> Kernel driver in use: r8169 Kernel modules: r8169 sudo rfkill list all 2: phy2: Wireless LAN Soft blocked: no Hard blocked: no Would appreciate insight on how to chase this down.

  Read the article

• Oracle Flashback Technologies - Overview

  - by Sridhar_R-Oracle

  Oracle Flashback Technologies - IntroductionIn his May 29th 2014 blog, my colleague Joe Meeks introduced Oracle Maximum Availability Architecture (MAA) and discussed both planned and unplanned outages. Let’s take a closer look at unplanned outages. These can be caused by physical failures (e.g., server, storage, network, file deletion, physical corruption, site failures) or by logical failures – cases where all components and files are physically available, but data is incorrect or corrupt. These logical failures are usually caused by human errors or application logic errors. This blog series focuses on these logical errors – what causes them and how to address and recover from them using Oracle Database Flashback. In this introductory blog post, I’ll provide an overview of the Oracle Database Flashback technologies and will discuss the features in detail in future blog posts. Let’s get started. We are all human beings (unless a machine is reading this), and making mistakes is a part of what we do…often what we do best!  We “fat finger”, we spill drinks on keyboards, unplug the wrong cables, etc.  In addition, many of us, in our lives as DBAs or developers, must have observed, caused, or corrected one or more of the following unpleasant events: Accidentally updated a table with wrong values !! Performed a batch update that went wrong - due to logical errors in the code !! Dropped a table !! How do DBAs typically recover from these types of errors? First, data needs to be restored and recovered to the point-in-time when the error occurred (incomplete or point-in-time recovery).  Moreover, depending on the type of fault, it’s possible that some services – or even the entire database – would have to be taken down during the recovery process.Apart from error conditions, there are other questions that need to be addressed as part of the investigation. For example, what did the data look like in the morning, prior to the error? What were the various changes to the row(s) between two timestamps? Who performed the transaction and how can it be reversed?  Oracle Database includes built-in Flashback technologies, with features that address these challenges and questions, and enable you to perform faster, easier, and convenient recovery from logical corruptions. HistoryFlashback Query, the first Flashback Technology, was introduced in Oracle 9i. It provides a simple, powerful and completely non-disruptive mechanism for data verification and recovery from logical errors, and enables users to view the state of data at a previous point in time.Flashback Technologies were further enhanced in Oracle 10g, to provide fast, easy recovery at the database, table, row, and even at a transaction level.Oracle Database 11g introduced an innovative method to manage and query long-term historical data with Flashback Data Archive. The 11g release also introduced Flashback Transaction, which provides an easy, one-step operation to back out a transaction. Oracle Database versions 11.2.0.2 and beyond further enhanced the performance of these features. Note that all the features listed here work without requiring any kind of restore operation.In addition, Flashback features are fully supported with the new multi-tenant capabilities introduced with Oracle Database 12c, Flashback Features Oracle Flashback Database enables point-in-time-recovery of the entire database without requiring a traditional restore and recovery operation. It rewinds the entire database to a specified point in time in the past by undoing all the changes that were made since that time.Oracle Flashback Table enables an entire table or a set of tables to be recovered to a point in time in the past.Oracle Flashback Drop enables accidentally dropped tables and all dependent objects to be restored.Oracle Flashback Query enables data to be viewed at a point-in-time in the past. This feature can be used to view and reconstruct data that was lost due to unintentional change(s) or deletion(s). This feature can also be used to build self-service error correction into applications, empowering end-users to undo and correct their errors.Oracle Flashback Version Query offers the ability to query the historical changes to data between two points in time or system change numbers (SCN) Oracle Flashback Transaction Query enables changes to be examined at the transaction level. This capability can be used to diagnose problems, perform analysis, audit transactions, and even revert the transaction by undoing SQLOracle Flashback Transaction is a procedure used to back-out a transaction and its dependent transactions.Flashback technologies eliminate the need for a traditional restore and recovery process to fix logical corruptions or make enquiries. Using these technologies, you can recover from the error in the same amount of time it took to generate the error. All the Flashback features can be accessed either via SQL command line (or) via Enterprise Manager.  Most of the Flashback technologies depend on the available UNDO to retrieve older data. The following table describes the various Flashback technologies: their purpose, dependencies and situations where each individual technology can be used.   Example Syntax Error investigation related:The purpose is to investigate what went wrong and what the values were at certain points in timeFlashback Queries  ( select .. as of SCN | Timestamp )   - Helps to see the value of a row/set of rows at a point in timeFlashback Version Queries  ( select .. versions between SCN | Timestamp and SCN | Timestamp)  - Helps determine how the value evolved between certain SCNs or between timestamps Flashback Transaction Queries (select .. XID=)   - Helps to understand how the transaction caused the changes.Error correction related:The purpose is to fix the error and correct the problems,Flashback Table  (flashback table .. to SCN | Timestamp)  - To rewind the table to a particular timestamp or SCN to reverse unwanted updates Flashback Drop (flashback table ..  to before drop )  - To undrop or undelete a table Flashback Database (flashback database to SCN  | Restore Point )  - This is the rewind button for Oracle databases. You can revert the entire database to a particular point in time. It is a fast way to perform a PITR (point-in-time recovery). Flashback Transaction (DBMS_FLASHBACK.TRANSACTION_BACKOUT(XID..))  - To reverse a transaction and its related transactions Advanced use cases Flashback technology is integrated into Oracle Recovery Manager (RMAN) and Oracle Data Guard. So, apart from the basic use cases mentioned above, the following use cases are addressed using Oracle Flashback. Block Media recovery by RMAN - to perform block level recovery Snapshot Standby - where the standby is temporarily converted to a read/write environment for testing, backup, or migration purposes Re-instate old primary in a Data Guard environment – this avoids the need to restore an old backup and perform a recovery to make it a new standby. Guaranteed Restore Points - to bring back the entire database to an older point-in-time in a guaranteed way. and so on..I hope this introductory overview helps you understand how Flashback features can be used to investigate and recover from logical errors.  As mentioned earlier, I will take a deeper-dive into to some of the critical Flashback features in my upcoming blogs and address common use cases.

  Read the article

• Oracle Database 12 c New Partition Maintenance Features by Gwen Lazenby

  - by hamsun

  One of my favourite new features in Oracle Database 12c is the ability to perform partition maintenance operations on multiple partitions. This means we can now add, drop, truncate and merge multiple partitions in one operation, and can split a single partition into more than two partitions also in just one command. This would certainly have made my life slightly easier had it been available when I administered a data warehouse at Oracle 9i. To demonstrate this new functionality and syntax, I am going to create two tables, ORDERS and ORDERS_ITEMS which have a parent-child relationship. ORDERS is to be partitioned using range partitioning on the ORDER_DATE column, and ORDER_ITEMS is going to partitioned using reference partitioning and its foreign key relationship with the ORDERS table. This form of partitioning was a new feature in 11g and means that any partition maintenance operations performed on the ORDERS table will also take place on the ORDER_ITEMS table as well. First create the ORDERS table - SQL CREATE TABLE orders ( order_id NUMBER(12), order_date TIMESTAMP, order_mode VARCHAR2(8), customer_id NUMBER(6), order_status NUMBER(2), order_total NUMBER(8,2), sales_rep_id NUMBER(6), promotion_id NUMBER(6), CONSTRAINT orders_pk PRIMARY KEY(order_id) ) PARTITION BY RANGE(order_date) (PARTITION Q1_2007 VALUES LESS THAN (TO_DATE('01-APR-2007','DD-MON-YYYY')), PARTITION Q2_2007 VALUES LESS THAN (TO_DATE('01-JUL-2007','DD-MON-YYYY')), PARTITION Q3_2007 VALUES LESS THAN (TO_DATE('01-OCT-2007','DD-MON-YYYY')), PARTITION Q4_2007 VALUES LESS THAN (TO_DATE('01-JAN-2008','DD-MON-YYYY')) ); Table created. Now the ORDER_ITEMS table SQL CREATE TABLE order_items ( order_id NUMBER(12) NOT NULL, line_item_id NUMBER(3) NOT NULL, product_id NUMBER(6) NOT NULL, unit_price NUMBER(8,2), quantity NUMBER(8), CONSTRAINT order_items_fk FOREIGN KEY(order_id) REFERENCES orders(order_id) on delete cascade) PARTITION BY REFERENCE(order_items_fk) tablespace example; Table created. Now look at DBA_TAB_PARTITIONS to get details of what partitions we have in the two tables – SQL select table_name,partition_name, partition_position position, high_value from dba_tab_partitions where table_owner='SH' and table_name like 'ORDER_%' order by partition_position, table_name; TABLE_NAME PARTITION_NAME POSITION HIGH_VALUE -------------- --------------- -------- ------------------------- ORDERS Q1_2007 1 TIMESTAMP' 2007-04-01 00:00:00' ORDER_ITEMS Q1_2007 1 ORDERS Q2_2007 2 TIMESTAMP' 2007-07-01 00:00:00' ORDER_ITEMS Q2_2007 2 ORDERS Q3_2007 3 TIMESTAMP' 2007-10-01 00:00:00' ORDER_ITEMS Q3_2007 3 ORDERS Q4_2007 4 TIMESTAMP' 2008-01-01 00:00:00' ORDER_ITEMS Q4_2007 4 Just as an aside it is also now possible in 12c to use interval partitioning on reference partitioned tables. In 11g it was not possible to combine these two new partitioning features. For our first example of the new 12cfunctionality, let us add all the partitions necessary for 2008 to the tables using one command. Notice that the partition specification part of the add command is identical in format to the partition specification part of the create command as shown above - SQL alter table orders add PARTITION Q1_2008 VALUES LESS THAN (TO_DATE('01-APR-2008','DD-MON-YYYY')), PARTITION Q2_2008 VALUES LESS THAN (TO_DATE('01-JUL-2008','DD-MON-YYYY')), PARTITION Q3_2008 VALUES LESS THAN (TO_DATE('01-OCT-2008','DD-MON-YYYY')), PARTITION Q4_2008 VALUES LESS THAN (TO_DATE('01-JAN-2009','DD-MON-YYYY')); Table altered. Now look at DBA_TAB_PARTITIONS and we can see that the 4 new partitions have been added to both tables – SQL select table_name,partition_name, partition_position position, high_value from dba_tab_partitions where table_owner='SH' and table_name like 'ORDER_%' order by partition_position, table_name; TABLE_NAME PARTITION_NAME POSITION HIGH_VALUE -------------- --------------- -------- ------------------------- ORDERS Q1_2007 1 TIMESTAMP' 2007-04-01 00:00:00' ORDER_ITEMS Q1_2007 1 ORDERS Q2_2007 2 TIMESTAMP' 2007-07-01 00:00:00' ORDER_ITEMS Q2_2007 2 ORDERS Q3_2007 3 TIMESTAMP' 2007-10-01 00:00:00' ORDER_ITEMS Q3_2007 3 ORDERS Q4_2007 4 TIMESTAMP' 2008-01-01 00:00:00' ORDER_ITEMS Q4_2007 4 ORDERS Q1_2008 5 TIMESTAMP' 2008-04-01 00:00:00' ORDER_ITEMS Q1_2008 5 ORDERS Q2_2008 6 TIMESTAMP' 2008-07-01 00:00:00' ORDER_ITEM Q2_2008 6 ORDERS Q3_2008 7 TIMESTAMP' 2008-10-01 00:00:00' ORDER_ITEMS Q3_2008 7 ORDERS Q4_2008 8 TIMESTAMP' 2009-01-01 00:00:00' ORDER_ITEMS Q4_2008 8 Next, we can drop or truncate multiple partitions by giving a comma separated list in the alter table command. Note the use of the plural ‘partitions’ in the command as opposed to the singular ‘partition’ prior to 12c– SQL alter table orders drop partitions Q3_2008,Q2_2008,Q1_2008; Table altered. Now look at DBA_TAB_PARTITIONS and we can see that the 3 partitions have been dropped in both the two tables – TABLE_NAME PARTITION_NAME POSITION HIGH_VALUE -------------- --------------- -------- ------------------------- ORDERS Q1_2007 1 TIMESTAMP' 2007-04-01 00:00:00' ORDER_ITEMS Q1_2007 1 ORDERS Q2_2007 2 TIMESTAMP' 2007-07-01 00:00:00' ORDER_ITEMS Q2_2007 2 ORDERS Q3_2007 3 TIMESTAMP' 2007-10-01 00:00:00' ORDER_ITEMS Q3_2007 3 ORDERS Q4_2007 4 TIMESTAMP' 2008-01-01 00:00:00' ORDER_ITEMS Q4_2007 4 ORDERS Q4_2008 5 TIMESTAMP' 2009-01-01 00:00:00' ORDER_ITEMS Q4_2008 5 Now let us merge all the 2007 partitions together to form one single partition – SQL alter table orders merge partitions Q1_2005, Q2_2005, Q3_2005, Q4_2005 into partition Y_2007; Table altered. TABLE_NAME PARTITION_NAME POSITION HIGH_VALUE -------------- --------------- -------- ------------------------- ORDERS Y_2007 1 TIMESTAMP' 2008-01-01 00:00:00' ORDER_ITEMS Y_2007 1 ORDERS Q4_2008 2 TIMESTAMP' 2009-01-01 00:00:00' ORDER_ITEMS Q4_2008 2 Splitting partitions is a slightly more involved. In the case of range partitioning one of the new partitions must have no high value defined, and in list partitioning one of the new partitions must have no list of values defined. I call these partitions the ‘everything else’ partitions, and will contain any rows contained in the original partition that are not contained in the any of the other new partitions. For example, let us split the Y_2007 partition back into 4 quarterly partitions – SQL alter table orders split partition Y_2007 into (PARTITION Q1_2007 VALUES LESS THAN (TO_DATE('01-APR-2007','DD-MON-YYYY')), PARTITION Q2_2007 VALUES LESS THAN (TO_DATE('01-JUL-2007','DD-MON-YYYY')), PARTITION Q3_2007 VALUES LESS THAN (TO_DATE('01-OCT-2007','DD-MON-YYYY')), PARTITION Q4_2007); Now look at DBA_TAB_PARTITIONS to get details of the new partitions – TABLE_NAME PARTITION_NAME POSITION HIGH_VALUE -------------- --------------- -------- ------------------------- ORDERS Q1_2007 1 TIMESTAMP' 2007-04-01 00:00:00' ORDER_ITEMS Q1_2007 1 ORDERS Q2_2007 2 TIMESTAMP' 2007-07-01 00:00:00' ORDER_ITEMS Q2_2007 2 ORDERS Q3_2007 3 TIMESTAMP' 2007-10-01 00:00:00' ORDER_ITEMS Q3_2007 3 ORDERS Q4_2007 4 TIMESTAMP' 2008-01-01 00:00:00' ORDER_ITEMS Q4_2007 4 ORDERS Q4_2008 5 TIMESTAMP' 2009-01-01 00:00:00' ORDER_ITEMS Q4_2008 5 Partition Q4_2007 has a high value equal to the high value of the original Y_2007 partition, and so has inherited its upper boundary from the partition that was split. As for a list partitioning example let look at the following another table, SALES_PAR_LIST, which has 2 partitions, Americas and Europe and a partitioning key of country_name. SQL select table_name,partition_name, high_value from dba_tab_partitions where table_owner='SH' and table_name = 'SALES_PAR_LIST'; TABLE_NAME PARTITION_NAME HIGH_VALUE -------------- --------------- ----------------------------- SALES_PAR_LIST AMERICAS 'Argentina', 'Canada', 'Peru', 'USA', 'Honduras', 'Brazil', 'Nicaragua' SALES_PAR_LIST EUROPE 'France', 'Spain', 'Ireland', 'Germany', 'Belgium', 'Portugal', 'Denmark' Now split the Americas partition into 3 partitions – SQL alter table sales_par_list split partition americas into (partition south_america values ('Argentina','Peru','Brazil'), partition north_america values('Canada','USA'), partition central_america); Table altered. Note that no list of values was given for the ‘Central America’ partition. However it should have inherited any values in the original ‘Americas’ partition that were not assigned to either the ‘North America’ or ‘South America’ partitions. We can confirm this by looking at the DBA_TAB_PARTITIONS view. SQL select table_name,partition_name, high_value from dba_tab_partitions where table_owner='SH' and table_name = 'SALES_PAR_LIST'; TABLE_NAME PARTITION_NAME HIGH_VALUE --------------- --------------- -------------------------------- SALES_PAR_LIST SOUTH_AMERICA 'Argentina', 'Peru', 'Brazil' SALES_PAR_LIST NORTH_AMERICA 'Canada', 'USA' SALES_PAR_LIST CENTRAL_AMERICA 'Honduras', 'Nicaragua' SALES_PAR_LIST EUROPE 'France', 'Spain', 'Ireland', 'Germany', 'Belgium', 'Portugal', 'Denmark' In conclusion, I hope that DBA’s whose work involves maintaining partitions will find the operations a bit more straight forward to carry out once they have upgraded to Oracle Database 12c. Gwen Lazenby is a Principal Training Consultant at Oracle. She is part of Oracle University's Core Technology delivery team based in the UK, teaching Database Administration and Linux courses. Her specialist topics include using Oracle Partitioning and Parallelism in Data Warehouse environments, as well as Oracle Spatial and RMAN.

  Read the article

• Wireless internet connection connects but internet does not work (no packets received). Wired does.

  - by Rodney

  When I connect my PC via ethernet cable to my ADSL router it works fine. When I connect via Wireless it connects and the internet will work for a random amount of time and then stop working. It stays connected with a strong signal but no packets are received. My laptop/iphone are right next to it and wireless works fine. If I open the Wireless USB status, it says it is connected to my SSID with full strength (54 mps - I am 3 meteres away from my router) and the activty shows as Packets 594 SENT and 105 RECEIVED (this goes up VERY slowly) I have tried the following: Turned off anitvirus and firewall completely. Tested the wifi signal- I am writing this on my laptop which is next to my PC and also has full wifi strength. Tried a different wireless adapter - I dug out an old PCI wireless card - it does the exact same thing. Compared all wireless settings to my laptop. I can ping google.com and it replies (sometimes with packet loss) When I reboot the PC it will connect for a minute or two (random time) and then just stops again. I tried Firefox, IE etc. no joy I have updated all latest versions (Netgear WG111v2) and drivers Checked Event Log - nothing unusual Ping the router (and even connect as admin for the few minutes when the internet does work) Changed the MTU down to 1200 using DrTCP Checked Device Manager for conflicts - none. I ping the router from the PC (192.168.0.10 - 192.168.0.1) and it replies with 4 packets. BUT, on my router admin page (which I access via http on my laptop wirelessly) - if I ping 192.168.0.10 all packets timeout (pinging my laptop 192.168.0.12 works fine) My router admin page shows the leased IP address for 192.168.0.10 (ie it is definitely talking to the router initially) Now I am out of ideas - please help. I think it is an OS/Software issue as I have tried 2 different wireless adapaters (PCI and USB) with the same result but all other wireless devices work fine around mine). It's not the firewall. It is getting assigned an IP address correctly (my PC gets 192.168.0.10, my laptop is .12) It is assigned by DHCP. As soon as I plug in the ethernet cable it all works fine. Repairing the adapter sometimes helps but it will always stop working after a random time. The wireless adapter always shows as connected with Excellent signal but the internet does not work. I am running Windows XP SP3 and have tried a Netgear WG111v2 USB adapter. Thanks in advance! UPDATE: The internet seems to be working, it is just either sending packets too small or slow to work (some small pages load bits of them very slowly but then hang). XP seems to have a networking diagnostic app - here is the output: Last diagnostic run time: 08/30/10 08:16:38 IP Configuration Diagnostic Invalid IP address info Valid IP address detected: 192.168.0.10 IP Layer Diagnostic Corrupted IP routing table info The default route is valid info The loopback route is valid info The local host route is valid info The local subnet route is valid Invalid ARP cache entries action The ARP cache has been flushed Gateway Diagnostic Gateway info The following proxy configuration is being used by IE: Automatically Detect Settings:Disabled Automatic Configuration Script: Proxy Server: Proxy Bypass list: info This computer has the following default gateway entry(ies): 192.168.0.1 info This computer has the following IP address(es): 192.168.0.10 info The default gateway is in the same subnet as this computer info The default gateway entry is a valid unicast address info The default gateway address was resolved via ARP in 1 try(ies) info The default gateway was reached via ICMP Ping in 1 try(ies) info TCP port 80 on host 65.55.12.249 was successfully reached info The Internet host www.microsoft.com was successfully reached info The default gateway is OK DNS Client Diagnostic DNS - Not a home user scenario info Using Web Proxy: no info Resolving name ok for (www.microsoft.com): yes No DNS servers DNS failure HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Passive): Successfully connected to ftp.microsoft.com. info HTTP: Successfully connected to www.microsoft.com. warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out error Could not make an HTTPS connection. info Redirecting user to support call WinSock Diagnostic WinSock status info All base service provider entries are present in the Winsock catalog. info The Winsock Service provider chains are valid. info Provider entry MSAFD Tcpip [TCP/IP] passed the loopback communication test. info Provider entry MSAFD Tcpip [UDP/IP] passed the loopback communication test. info Provider entry RSVP UDP Service Provider passed the loopback communication test. info Provider entry RSVP TCP Service Provider passed the loopback communication test. info Connectivity is valid for all Winsock service providers. Wireless Diagnostic Wireless - Service disabled Wireless - User SSID action User input required: Specify network name or SSID Wireless - First time setup info The Wireless Network name (SSID) to which the user would like to connect = RodSof Wifi. Wireless - Radio off info Valid IP address detected: 192.168.0.10 Wireless - Out of range Wireless - Hardware issue Wireless - Novice user Wireless - Ad-hoc network Wireless - Less preferred Wireless - 802.1x enabled Wireless - Configuration mismatch Wireless - Low SNR Network Adapter Diagnostic Network location detection info Using home Internet connection Network adapter identification info Network connection: Name=Local Area Connection 2, Device=Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC, MediaType=LAN, SubMediaType=LAN info Network connection: Name=Wireless USB, Device=NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter, MediaType=LAN, SubMediaType=WIRELESS info Both Ethernet and Wireless connections available, prompting user for selection action User input required: Select network connection info Wireless connection selected Network adapter status info Network connection status: Connected HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Active): Successfully connected to ftp.microsoft.com. warn HTTP: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved warn HTTP: Error 12002 connecting to www.hotmail.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out error Could not make an HTTP connection. error Could not make an HTTPS connection.

  Read the article

• How do I get a rt2800usb wireless device working?

  - by Jii

  My brand new desktop running 13.04 has endless problems with wireless. Dozens of others are flooding forums with reports of the same problems. It worked fine for a few days, then there were a few days where it started having problems sometimes and working sometimes. Now it never works at all. I have 5+ devices all able to connect without any trouble at all, including iPhone, Android phone, 3DS, multiple game consoles, a laptop running windows 7, and even a second desktop machine running Ubuntu 12.04 sitting right behind the 13.04 machine. All other devices have full wireless bars displayed (strong signals). At any moment, one of the following is happening, and it changes randomly: Trying to connect forever, but never establishing a connection. Wireless icon constantly animating. Finds no wireless networks at all. (There are 12+ in range according to other devices.) Will not try to connect to the network. If I use the icon to connect, it will display "Disconnected" within a few seconds. Will continuously ask for the network password. Typing it in correctly does not help. Wireless is working fine. This happens sometimes. It can work for days at a time, or only 10 mins at a time. Various things that usually do nothing but sometimes fix the problem: Reboot. This has the best chance of helping, but it usually takes 5+ times. Disable/re-enable Wi-Fi using the wireless icon. Disable/re-enable Networking using the wireless icon. Use the icon to try and connect to a network (if found). Use the icon to open Edit Connections and delete my connection info, causing it to be recreated (once it's actually found again). Various things that seem to make no difference: Changing between using Linux headers in grub at bootup, between 3.10.0, 3.9.0, or 3.8.0. Move the wireless router very close to the desktop. Running sudo rfkill unblock all (I dunno what this is supposed to do.) I've used Ubuntu for 6 years and I've never had a problem with networking. Now I'm spending all my time reading through endless problem reports and trying all the answers. None of them have helped. I am doing this instead of getting work done, which is defeating the whole purpose of using Ubuntu. It's heartbreaking to be honest. In the current state of "no networks are showing up", here are outputs from the random things that other people are usually asked to run: lspic 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06) 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04) 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #1 (rev d4) 00:1c.2 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4) 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] (rev a1) 01:00.1 Audio device: NVIDIA Corporation GF119 HDMI Audio Controller (rev a1) 03:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03) lsmod Module Size Used by e100 41119 0 nls_iso8859_1 12713 1 parport_pc 28284 0 ppdev 17106 0 bnep 18258 2 rfcomm 47863 12 binfmt_misc 17540 1 arc4 12573 2 rt2800usb 27201 0 rt2x00usb 20857 1 rt2800usb rt2800lib 68029 1 rt2800usb rt2x00lib 55764 3 rt2x00usb,rt2800lib,rt2800usb coretemp 13596 0 mac80211 656164 3 rt2x00lib,rt2x00usb,rt2800lib kvm_intel 138733 0 kvm 452835 1 kvm_intel cfg80211 547224 2 mac80211,rt2x00lib crc_ccitt 12707 1 rt2800lib ghash_clmulni_intel 13259 0 aesni_intel 55449 0 usb_storage 61749 1 aes_x86_64 17131 1 aesni_intel joydev 17613 0 xts 12922 1 aesni_intel nouveau 1001310 3 snd_hda_codec_hdmi 37407 1 lrw 13294 1 aesni_intel gf128mul 14951 2 lrw,xts mxm_wmi 13021 1 nouveau snd_hda_codec_realtek 46511 1 ablk_helper 13597 1 aesni_intel wmi 19256 2 mxm_wmi,nouveau snd_hda_intel 44397 5 ttm 88251 1 nouveau drm_kms_helper 49082 1 nouveau drm 295908 5 ttm,drm_kms_helper,nouveau snd_hda_codec 190010 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel cryptd 20501 3 ghash_clmulni_intel,aesni_intel,ablk_helper snd_hwdep 13613 1 snd_hda_codec snd_pcm 102477 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel btusb 18291 0 snd_page_alloc 18798 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 i2c_algo_bit 13564 1 nouveau snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30417 1 snd_seq_midi snd_seq 61930 2 snd_seq_midi_event,snd_seq_midi bluetooth 251354 22 bnep,btusb,rfcomm snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi lpc_ich 17060 0 snd_timer 29989 2 snd_pcm,snd_seq mei 46588 0 snd 69533 20 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device psmouse 97838 0 microcode 22923 0 soundcore 12680 1 snd video 19467 1 nouveau mac_hid 13253 0 serio_raw 13215 0 lp 17799 0 parport 46562 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 47346 0 hid 101248 2 hid_generic,usbhid ahci 30063 3 libahci 32088 1 ahci e1000e 207005 0 ptp 18668 1 e1000e pps_core 14080 1 ptp sudo lshw -c network 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06) 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04) 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #1 (rev d4) 00:1c.2 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4) 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] (rev a1) 01:00.1 Audio device: NVIDIA Corporation GF119 HDMI Audio Controller (rev a1) 03:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03) sudo iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on sudo iwlist scan eth0 Interface doesn't support scanning. lo Interface doesn't support scanning. wlan0 No scan results NOTE: This dmesg was done after a reboot where the network manager was continuously displaying the "disconnected" message over and over. So it must have been trying to connect at this time. My network was displayed in the list of options, as the only option despite other devices picking up 12+ access points. The router channel is set to auto. dmesg | tail -30 [ 187.418446] wlan0: associated [ 190.405601] wlan0: disassociated from 00:14:d1:a8:c3:44 (Reason: 15) [ 190.443312] cfg80211: Calling CRDA to update world regulatory domain [ 190.443431] wlan0: deauthenticating from 00:14:d1:a8:c3:44 by local choice (reason=3) [ 190.451635] cfg80211: World regulatory domain updated: [ 190.451643] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 190.451648] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 190.451652] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 190.451656] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 190.451659] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 190.451662] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 191.824451] wlan0: authenticate with 00:14:d1:a8:c3:44 [ 191.850608] wlan0: send auth to 00:14:d1:a8:c3:44 (try 1/3) [ 191.884604] wlan0: send auth to 00:14:d1:a8:c3:44 (try 2/3) [ 191.886309] wlan0: authenticated [ 191.886579] rt2800usb 3-5.3:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 191.886588] rt2800usb 3-5.3:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 191.889556] wlan0: associate with 00:14:d1:a8:c3:44 (try 1/3) [ 192.001493] wlan0: associate with 00:14:d1:a8:c3:44 (try 2/3) [ 192.040274] wlan0: RX AssocResp from 00:14:d1:a8:c3:44 (capab=0x431 status=0 aid=3) [ 192.044235] wlan0: associated [ 193.948188] wlan0: deauthenticating from 00:14:d1:a8:c3:44 by local choice (reason=3) [ 193.981501] cfg80211: Calling CRDA to update world regulatory domain [ 193.984080] cfg80211: World regulatory domain updated: [ 193.984082] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 193.984084] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 193.984085] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 193.984085] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 193.984086] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 193.984087] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) The router uses MAC filtering, and security is WPA PSK with cipher as auto. So, any ideas? Or is the solution just to not use 13.04 unless you have a wired connection? (I don't have this option.) If so, please just tell me straight. I survived 9.04 Jaunty, and I can survive 13.04 Raring. Update #1 Results from trying Wild Man's first answer: jii@conan:~$ echo "options rt2800usb nohwcrypt=y" | sudo tee /etc/modprobe.d/rt2800usb.conf options rt2800usb nohwcrypt=y jii@conan:~$ sudo modprobe -rfv rt2800usb rmmod rt2800usb rmmod rt2800lib rmmod crc_ccitt rmmod rt2x00usb rmmod rt2x00lib rmmod mac80211 rmmod cfg80211 jii@conan:~$ sudo modprobe -v rt2800usb insmod /lib/modules/3.10.0-031000-generic/kernel/lib/crc-ccitt.ko insmod /lib/modules/3.10.0-031000-generic/kernel/net/wireless/cfg80211.ko insmod /lib/modules/3.10.0-031000-generic/kernel/net/mac80211/mac80211.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2800lib.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2x00usb.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2800usb.ko nohwcrypt=y I tried: gksudo gedit /etc/pm/power.d/wireless but I didn't have the package. It said to install gksu. I tried that, but of course, not having Internet, I didn't get the package. So instead I did: sudo gedit /etc/pm/power.d/wireless Which created the file. Here is the body: #!/bin/sh /sbin/iwconfig wlan0 power off I then rebooted. No change. I tried adding exit 0 to the bottom of the wireless file, and rebooted. No change. Please note that this is a desktop machine. I'm assuming power management is primarily for laptops, but the iwconfig does state that power management is on, so who knows. The recommended router changes I did not do, since the current router settings are (I think) required for some of the older devices I have, and because the current settings work on all my modern devices including Ubuntu 12.04 and Windows 7. I do appreciate the advice though, and I'll look into it when I have time. Anything else to try? Update #2 I booted into Ubuntu 12.04.3 from a dvd, and the same problems exist. I have a separate old desktop machine with 12.04 installed that has no wireless problems at all. So obviously the problem is wireless hardware compatibility in both 12.04.03 LTS and 13.04. Update #3 The same problems exist even when using a wired connection. I plugged an ethernet cable directly to the router and the network manager added an "Auto Ethernet" entry, but it cannot establish a connection to it. So the problem is not specific to wireless. Meanwhile, I purchased a Trendnet N300 wireless USB adapter, TEW-664UB. I plugged it in, but I have no idea how to get Ubuntu to try and use it. Can anyone tell me how? Can I download a package on another computer and copy the .deb over to do an install, etc? I'm installing windows 7 to double check that the internet connection works there and it's not just some magically faulty hardware. Thanks for your help.

  Read the article

• Oracle OpenWorld 2013 – Wrap up by Sven Bernhardt

  - by JuergenKress

  OOW 2013 is over and we’re heading home, so it is time to lean back and reflecting about the impressions we have from the conference. First of all: OOW was great! It was a pleasure to be a part of it. As already mentioned in our last blog article: It was the biggest OOW ever. Parallel to the conference the America’s Cup took place in San Francisco and the Oracle Team America won. Amazing job by the team and again congratulations from our side Back to the conference. The main topics for us are: Oracle SOA / BPM Suite 12c Adaptive Case management (ACM) Big Data Fast Data Cloud Mobile Below we will go a little more into detail, what are the key takeaways regarding the mentioned points: Oracle SOA / BPM Suite 12c During the five days at OOW, first details of the upcoming major release of Oracle SOA Suite 12c and Oracle BPM Suite 12c have been introduced. Some new key features are: Managed File Transfer (MFT) for transferring big files from a source to a target location Enhanced REST support by introducing a new REST binding Introduction of a generic cloud adapter, which can be used to connect to different cloud providers, like Salesforce Enhanced analytics with BAM, which has been totally reengineered (BAM Console now also runs in Firefox!) Introduction of templates (OSB pipelines, component templates, BPEL activities templates) EM as a single monitoring console OSB design-time integration into JDeveloper (Really great!) Enterprise modeling capabilities in BPM Composer These are only a few points from what is coming with 12c. We are really looking forward for the new realese to come out, because this seems to be really great stuff. The suite becomes more and more integrated. From 10g to 11g it was an evolution in terms of developing SOA-based applications. With 12c, Oracle continues it’s way – very impressive. Adaptive Case Management Another fantastic topic was Adaptive Case Management (ACM). The Oracle PMs did a great job especially at the demo grounds in showing the upcoming Case Management UI (will be available in 11g with the next BPM Suite MLR Patch), the roadmap and the differences between traditional business process modeling. They have been very busy during the conference because a lot of partners and customers have been interested Big Data Big Data is one of the current hype themes. Because of huge data amounts from different internal or external sources, the handling of these data becomes more and more challenging. Companies have a need for analyzing the data to optimize their business. The challenge is here: the amount of data is growing daily! To store and analyze the data efficiently, it is necessary to have a scalable and flexible infrastructure. Here it is important that hardware and software are engineered to work together. Therefore several new features of the Oracle Database 12c, like the new in-memory option, have been presented by Larry Ellison himself. From a hardware side new server machines like Fujitsu M10 or new processors, such as Oracle’s new M6-32 have been announced. The performance improvements, when using one of these hardware components in connection with the improved software solutions were really impressive. For more details about this, please take look at our previous blog post. Regarding Big Data, Oracle also introduced their Big Data architecture, which consists of: Oracle Big Data Appliance that is preconfigured with Hadoop Oracle Exdata which stores a huge amount of data efficently, to achieve optimal query performance Oracle Exalytics as a fast and scalable Business analytics system Analysis of the stored data can be performed using SQL, by streaming the data directly from Hadoop to an Oracle Database 12c. Alternatively the analysis can be directly implemented in Hadoop using “R”. In addition Oracle BI Tools can be used to analyze the data. Fast Data Fast Data is a complementary approach to Big Data. A huge amount of mostly unstructured data comes in via different channels with a high frequency. The analysis of these data streams is also important for companies, because the incoming data has to be analyzed regarding business-relevant patterns in real-time. Therefore these patterns must be identified efficiently and performant. To do so, in-memory grid solutions in combination with Oracle Coherence and Oracle Event Processing demonstrated very impressive how efficient real-time data processing can be. One example for Fast Data solutions that was shown during the OOW was the analysis of twitter streams regarding customer satisfaction. The feeds with negative words like “bad” or “worse” have been filtered and after a defined treshold has been reached in a certain timeframe, a business event was triggered. Cloud Another key trend in the IT market is of course Cloud Computing and what it means for companies and their businesses. Oracle announced their Cloud strategy and vision – companies can focus on their real business while all of the applications are available via Cloud. This also includes Oracle Database or Oracle Weblogic, so that companies can also build, deploy and run their own applications within the cloud. Three different approaches have been introduced: Infrastructure as a Service (IaaS) Platform as a Service (PaaS) Software as a Service (SaaS) Using the IaaS approach only the infrastructure components will be managed in the Cloud. Customers will be very flexible regarding memory, storage or number of CPUs because those parameters can be adjusted elastically. The PaaS approach means that besides the infrastructure also the platforms (such as databases or application servers) necessary for running applications will be provided within the Cloud. Here customers can also decide, if installation and management of these infrastructure components should be done by Oracle. The SaaS approach describes the most complete one, hence all applications a company uses are managed in the Cloud. Oracle is planning to provide all of their applications, like ERP systems or HR applications, as Cloud services. In conclusion this seems to be a very forward-thinking strategy, which opens up new possibilities for customers to manage their infrastructure and applications in a flexible, scalable and future-oriented manner. As you can see, our OOW days have been very very interresting. We collected many helpful informations for our projects. The new innovations presented at the confernce are great and being part of this was even greater! We are looking forward to next years’ conference! Links: http://www.oracle.com/openworld/index.html http://thecattlecrew.wordpress.com/2013/09/23/first-impressions-from-oracle-open-world-2013 SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: cattleCrew,Sven Bernhard,OOW2013,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• CodePlex Daily Summary for Saturday, June 07, 2014

  CodePlex Daily Summary for Saturday, June 07, 2014Popular ReleasesSFDL.NET: SFDL.NET (2.2.9.3): Changelog: Retry Bugfix (Error Counter wurde nicht korrekt zurückgesetzt) Neue Einstellung: Retry Wartezeit ist nun EinstellbarLoad Runner - HTTP Pressure Test Tool: Load Runner 1.2: 1. added support for distributed load test (read documentation for details) 2. added detail documentationAspose for Apache POI: Aspose.Words vs Apache POI WP - v 1.1: Release contain the Code Comparison for Features in Apache POI WP SDK and Aspose.Words What's New ?Following Examples: Working with Headers Working with Footers Access Ranges in Document Delete Ranges in Document Insert Before and After Ranges Feedback and Suggestions Many more examples are yet to come here. Keep visiting us. Raise your queries and suggest more examples via Aspose Forums or via this social coding site.babelua: 1.5.7.0: V1.5.7.0 - 2014.6.6Stability improvement: use "lua scripts folder" as lua search path when debugging;SEToolbox: SEToolbox 01.033.007 Release 1: Fixed breaking changes in Space Engineers in latest update. Installation of this version will replace older version.Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.10: Virto Commerce Community Edition version 1.10. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes bug fixes and improvements (including Commerce Manager localization and https support). More details about this release can be found on our blog at http://blog.virtocommerce.com.NPOI: NPOI 2.1: Assembly Version: 2.1.0 New Features a. XSSFSheet.CopySheet b. Excel2Html for XSSF c. insert picture in word 2007 d. Implement IfError function in formula engine Bug Fixes a. fix conditional formatting issue b. fix ctFont order issue c. fix vertical alignment issue in XSSF d. add IndexedColors to NPOI.SS.UserModel e. fix decimal point issue in non-English culture f. fix SetMargin issue in XSSF g.fix multiple images insert issue in XSSF h.fix rich text style missing issue in XSSF i. fix cell...51Degrees - Device Detection and Redirection: 3.1.2.3: Version 3.1 HighlightsDevice detection algorithm is over 100 times faster. Regular expressions and levenshtein distance calculations are no longer used. The device detection algorithm performance is no longer limited by the number of device combinations contained in the dataset. Two modes of operation are available: Memory – the detection data set is loaded into memory and there is no continuous connection to the source data file. Slower initialisation time but faster detection performanc...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.27.0: CodeMap now indicates the type name for all members Implemented running scripts 'as administrator'. Just add '//css_npp asadmin' to the script and run it as usual. 'Prepare script for distribution' now aggregates script dependency assemblies. Various improvements in CodeSnipptet, Autcompletion and MethodInfo interactions with each other. Added printing line number for the entries in CodeMap (subject of configuration value) Improved debugging step indication for classless scripts ...Kartris E-commerce: Kartris v2.6003: Bug fixes: Fixed issue where category could not be saved if parent categories not altered Updated split string function to 500 chars otherwise problems with attribute filtering in PowerPack Improvements: If a user has group pricing below that available through qty discounts, that will show in place of the qty discountClosedXML - The easy way to OpenXML: ClosedXML 0.72.3: 70426e13c415 ClosedXML for .Net 4.0 now uses Open XML SDK 2.5 b9ef53a6654f Merge branch 'master' of https://git01.codeplex.com/forks/vbjay/closedxml 727714e86416 Fix range.Merge(Boolean) for .Net 3.5 eb1ed478e50e Make public range.Merge(Boolean checkIntersects) 6284cf3c3991 More performance improvements when saving.DNN Blog: 06.00.07: Highlights: Enhancement: Option to show management panel on child modules Fix: Changed SPROC and code to ensure the right people are notified of pending comments. (CP-24018) Fix: Fix to have notification actions authentication assume the right module id so these will work from the messaging center (CP-24019) Fix: Fix to issue in categories in a post that will not save when no categories and no tags selectedcsv2xlsx: Source code: Source code of applicationFamily Tree Analyzer: Version 4.0.0.0-beta5: This major release introduces a significant new feature the ability to search the UK Ordnance Survey 50k Gazetteer for small placenames that often don't appear on a modern Google Map. This means significant numbers of locations that were previously not found by Google Geocoding will now be found by using OS Geocoding. In addition I've added support for loading the Scottish 1930 Parish boundary maps, whilst slightly different from the parish boundaries in use in the 1800s that are familiar to...TEncoder: 4.0.0: --4.0.0 -Added: Video downloader -Added: Total progress will be updated more smoothly -Added: MP4Box progress will be shown -Added: A tool to create gif image from video -Added: An option to disable trimming -Added: Audio track option won't be used for mpeg sources as default -Fixed: Subtitle position wasn't used -Fixed: Duration info in the file list wasn't updated after trimming -Updated: FFMpegVeraCrypt: VeraCrypt version 1.0d: Changes between 1.0c and 1.0d (03 June 2014) : Correct issue while creating hidden operating system. Minor fixes (look at git history for more details).Microsoft Web Protection Library: AntiXss Library 4.3.0: Download from nuget or the Microsoft Download Center This issue finally addresses the over zealous behaviour of the HTML Sanitizer which should now function as expected once again. HTML encoding has been changed to safelist a few more characters for webforms compatibility. This will be the last version of AntiXSS that contains a sanitizer. Any new releases will be encoding libraries only. We recommend you explore other sanitizer options, for example AntiSamy https://www.owasp.org/index....ConEmu - Windows console with tabs: ConEmu 140602 [Alpha]: ConEmu - developer build x86 and x64 versions. Written in C++, no additional packages required. Run "ConEmu.exe" or "ConEmu64.exe". Some useful information you may found: http://superuser.com/questions/tagged/conemu http://code.google.com/p/conemu-maximus5/wiki/ConEmuFAQ http://code.google.com/p/conemu-maximus5/wiki/TableOfContents If you want to use ConEmu in portable mode, just create empty "ConEmu.xml" file near to "ConEmu.exe" Tweetinvi a friendly Twitter C# API: Tweetinvi 0.9.3.x: Timelines- Added all the parameters available from the Timeline Endpoints in Tweetinvi. - This is available for HomeTimeline, UserTimeline, MentionsTimeline // Simple query var tweets = Timeline.GetHomeTimeline(); // Create a parameter for queries with specific parameters var timelineParameter = Timeline.CreateHomeTimelineRequestParameter(); timelineParameter.ExcludeReplies = true; timelineParameter.TrimUser = true; var tweets = Timeline.GetHomeTimeline(timelineParameter); Tweetinvi 0.9.3.1...Sandcastle Help File Builder: Help File Builder and Tools v2014.5.31.0: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release completes removal of the branding transformations and implements the new VS2013 presentation style that utilizes the new lightweight website format. Several breaking cha...New Projects.NET Extended Framework: .NET Extended FrameworkActivity Diagram: This is an attempt to parse C# Operation source and convert them into UML Activity Diagrams. The development of a suitable diagram editor is the next priorityBango Payment Flow in-app payments: Bango Payment Flow in-app paymentsDeckEditor: ?????????????????????????????????。 ?????????、CSV????、???????????。demodjango: just a demo project to record how to using djangoExport Bugs: This application will export all the bugs in a current project from TFS. It also has the option to export all attachments in the current projectFantom - Expression Based Dynamic Language Manager: Easy Dynamic Language (over MSSQL) Management for Asp.Net Web Forms. Very easy create dynamic multi language Asp.Net web site.JIRAShell: Provides PowerShell cmdlets for working with JIRA.PipeUtil: PipeUtil is a library that simplifies use the feature PIPE windows. Has the capability of client and server with threads support.Post Deployment Smoke Tester: This tool enables you to easily carry out post deployment smoke tests against your installed deployments to determine if your environment is in a good state.Quan Ly Dang Ki Internet: quan ly dang ki internetToolKD: ToolKD console application designed to change the binary code for directories that are used KitchenDraw program. Wiki Parsing Service: A web service to Parse wiki mark-up to HTML and vice versaXBee-API for .NET: This is .NET library for communication with XBee/XBee-Pro series 1 (IEEE 802.15.4) and series 2 (ZB/ZigBee Pro) OEM RF Modules. XPinterest: XPinterestZSoft-CMS: the project is going to use a new approach other than regular modular cms es.

  Read the article

• ODEE Green Field (Windows) Part 4 - Documaker

  - by AndyL-Oracle

  Welcome back! We're about nearing completion of our installation of Oracle Documaker Enterprise Edition ("ODEE") in a green field. In my previous post, I covered the installation of SOA Suite for WebLogic. Before that, I covered the installation of WebLogic, and Oracle 11g database - all of which constitute the prerequisites for installing ODEE. Naturally, if your environment already has a WebLogic server and Oracle database, then you can skip all those components and go straight for the heart of the installation of ODEE. The ODEE installation is comprised of two procedures, the first covers the installation, which is running the installer and answering some questions. This will lay down the files necessary to install into the tiers (e.g. database schemas, WebLogic domains, etcetera). The second procedure is to deploy the configuration files into the various components (e.g. deploy the database schemas, WebLogic domains, SOA composites, etcetera). I will segment my posts accordingly! Let's get started, shall we? Unpack the installation files into a temporary directory location. This should extract a zip file. Extract that zip file into the temporary directory location. Navigate to and execute the installer in Disk1/setup.exe. You may have to allow the program to run if User Account Control is enabled. Once the dialog below is displayed, click Next. Select your ODEE Home - inside this directory is where all the files will be deployed. For ease of support, I recommend using the default, however you can put this wherever you want. Click Next. Select the database type, database connection type – note that the database name should match the value used for the connection type (e.g. if using SID, then the name should be IDMAKER; if using ServiceName, the name should be “idmaker.us.oracle.com”). Verify whether or not you want to enable advanced compression. Note: if you are not licensed for Oracle 11g Advanced Compression option do not use this option! Terrible, terrible calamities will befall you if you do! Click Next. Enter the Documaker Admin user name (default "dmkr_admin" is recommended for support purposes) and set the password. Update the System name and ID (must be unique) if you want/need to - since this is a green field install you should be able to use the default System ID. The only time you'd change this is if you were, for some reason, installing a new ODEE system into an existing schema that already had a system. Click Next. Enter the Assembly Line user name (default "dmkr_asline" is recommended) and set the password. Update the Assembly Line name and ID (must be unique) if you want/need to - it's quite possible that at some point you will create another assembly line, in which case you have several methods of doing so. One is to re-run the installer, and in this case you would pick a different assembly line ID and name. Click Next. Note: you can set the DB folder if needed (typically you don’t – see ODEE Installation Guide for specifics. Select the appropriate Application Server type - in this case, our green field install is going to use WebLogic - set the username to weblogic (this is required) and specify your chosen password. This credential will be used to access the application server console/control panel. Keep in mind that there are specific criteria on password choices that are required by WebLogic, but are not enforced by the installer (e.g. must contain a number, must be of a certain length, etcetera). Choose a strong password. Set the connection information for the JMS server. Note that for the 12.3.x version, the installer creates a separate JVM (WebLogic managed server) that hosts the JMS server, whereas prior editions place the JMS server on the AdminServer.  You may also specify a separate URL to the JMS server in case you intend to move the JMS resources to a separate/different server (e.g. back to AdminServer). You'll need to provide a login principal and credentials - for simplicity I usually make this the same as the WebLogic domain user, however this is not a secure practice! Make your JMS principal different from the WebLogic principal and choose a strong password, then click Next. Specify the Hot Folder(s) (comma-delimited if more than one) - this is the directory/directories that is/are monitored by ODEE for jobs to process. Click Next. If you will be setting up an SMTP server for ODEE to send emails, you may configure the connection details here. The details required are simple: hostname, port, user/password, and the sender's address (e.g. emails will appear to be sent by the address shown here so if the recipient clicks "reply", this is where it will go). Click Next. If you will be using Oracle WebCenter:Content (formerly known as Oracle UCM) you can enable this option and set the endpoints/credentials here. If you aren't sure, select False - you can always go back and enable this later. I'm almost 76% certain there will be a post sometime in the future that details how to configure ODEE + WCC:C! Click Next. If you will be using Oracle UMS for sending MMS/text messages, you can enable and set the endpoints/credentials here. As with UCM, if you're not sure, don't enable it - you can always set it later. Click Next. On this screen you can change the endpoints for the Documaker Web Service (DWS), and the endpoints for approval processing in Documaker Interactive. The deployment process for ODEE will create 3 managed WebLogic servers for hosting various Documaker components (JMS, Interactive, DWS, Dashboard, Documaker Administrator, etcetera) and it will set the ports used for each of these services. In this screen you can change these values if you know how you want to deploy these managed servers - but for now we'll just accept the defaults. Click Next. Verify the installation details and click Install. You can save the installation into a response file if you need to (which might be useful if you want to rerun this installation in an unattended fashion). Allow the installation to progress... Click Next. You can save the response file if needed (e.g. in case you forgot to save it earlier!) Click Finish. That's it, you're done with the initial installation. Have a look around the ODEE_HOME that you just installed (remember we selected c:\oracle\odee_1?) and look at the files that are laid down. Don't change anything just yet! Stay tuned for the next segment where we complete and verify the installation. 

  Read the article

• Wireless card power management

  - by penner

  I have noticed that when my computer in plugged in, the wireless strength increases. I'm assuming this is to do with power management. Is there a way to disable Wireless Power Management? I have found a few blog posts that show hacks to disable this but what is best practice here? Should there not be an option via the power menu that lets you toggle this? EDIT -- FILES AND LOGS AS REQUESTED /var/log/kern.log Jul 11 11:45:27 CoolBreeze kernel: [ 6.528052] postgres (1308): /proc/1308/oom_adj is deprecated, please use /proc/1308/oom_score_adj instead. Jul 11 11:45:27 CoolBreeze kernel: [ 6.532080] [fglrx] Gart USWC size:1280 M. Jul 11 11:45:27 CoolBreeze kernel: [ 6.532084] [fglrx] Gart cacheable size:508 M. Jul 11 11:45:27 CoolBreeze kernel: [ 6.532091] [fglrx] Reserved FB block: Shared offset:0, size:1000000 Jul 11 11:45:27 CoolBreeze kernel: [ 6.532094] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000 Jul 11 11:45:27 CoolBreeze kernel: [ 6.532098] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 Jul 11 11:45:38 CoolBreeze kernel: [ 17.423743] eth1: no IPv6 routers present Jul 11 11:46:37 CoolBreeze kernel: [ 75.836426] warning: `proftpd' uses 32-bit capabilities (legacy support in use) Jul 11 11:46:37 CoolBreeze kernel: [ 75.884215] init: plymouth-stop pre-start process (2922) terminated with status 1 Jul 11 11:54:25 CoolBreeze kernel: [ 543.679614] eth1: no IPv6 routers present dmesg [ 1.411959] ACPI: Power Button [PWRB] [ 1.412046] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 1.412054] ACPI: Sleep Button [SLPB] [ 1.412150] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 1.412765] ACPI: Lid Switch [LID0] [ 1.412866] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.412874] ACPI: Power Button [PWRF] [ 1.412996] ACPI: Fan [FAN0] (off) [ 1.413068] ACPI: Fan [FAN1] (off) [ 1.419493] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.419498] ACPI: Thermal Zone [TZ00] (27 C) [ 1.421913] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.421918] ACPI: Thermal Zone [TZ01] (61 C) [ 1.421971] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.421986] ACPI: Battery Slot [BAT0] (battery present) [ 1.422062] ERST: Table is not found! [ 1.422067] GHES: HEST is not enabled! [ 1.422158] isapnp: Scanning for PnP cards... [ 1.422242] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.434620] ACPI: Battery Slot [BAT0] (battery present) [ 1.736355] Freeing initrd memory: 14352k freed [ 1.777846] isapnp: No Plug & Play device found [ 1.963650] Linux agpgart interface v0.103 [ 1.967148] brd: module loaded [ 1.968866] loop: module loaded [ 1.969134] ahci 0000:00:1f.2: version 3.0 [ 1.969154] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.969226] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 1.969277] ahci: SSS flag set, parallel bus scan disabled [ 1.969320] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x23 impl SATA mode [ 1.969329] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 1.969338] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.983340] scsi0 : ahci [ 1.983515] scsi1 : ahci [ 1.983670] scsi2 : ahci [ 1.983829] scsi3 : ahci [ 1.983985] scsi4 : ahci [ 1.984145] scsi5 : ahci [ 1.984270] ata1: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005100 irq 45 [ 1.984277] ata2: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005180 irq 45 [ 1.984282] ata3: DUMMY [ 1.984285] ata4: DUMMY [ 1.984288] ata5: DUMMY [ 1.984292] ata6: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005380 irq 45 [ 1.985150] Fixed MDIO Bus: probed [ 1.985192] tun: Universal TUN/TAP device driver, 1.6 [ 1.985196] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 1.985285] PPP generic driver version 2.4.2 [ 1.985472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.985507] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.985534] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.985541] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.985626] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.985666] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.989663] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.989690] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1005800 [ 2.002183] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.002447] hub 1-0:1.0: USB hub found [ 2.002455] hub 1-0:1.0: 3 ports detected [ 2.002607] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.002633] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.002639] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 2.002737] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.002775] ehci_hcd 0000:00:1d.0: debug port 2 [ 2.006780] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 2.006806] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1005c00 [ 2.022161] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.022401] hub 2-0:1.0: USB hub found [ 2.022409] hub 2-0:1.0: 3 ports detected [ 2.022567] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.022599] uhci_hcd: USB Universal Host Controller Interface driver [ 2.022720] usbcore: registered new interface driver libusual [ 2.022813] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.035831] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.035844] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.036096] mousedev: PS/2 mouse device common for all mice [ 2.036710] rtc_cmos 00:07: RTC can wake from S4 [ 2.036881] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 2.037143] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.037503] device-mapper: uevent: version 1.0.3 [ 2.037656] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected] [ 2.037725] EISA: Probing bus 0 at eisa.0 [ 2.037729] EISA: Cannot allocate resource for mainboard [ 2.037734] Cannot allocate resource for EISA slot 1 [ 2.037738] Cannot allocate resource for EISA slot 2 [ 2.037741] Cannot allocate resource for EISA slot 3 [ 2.037745] Cannot allocate resource for EISA slot 4 [ 2.037749] Cannot allocate resource for EISA slot 5 [ 2.037753] Cannot allocate resource for EISA slot 6 [ 2.037756] Cannot allocate resource for EISA slot 7 [ 2.037760] Cannot allocate resource for EISA slot 8 [ 2.037764] EISA: Detected 0 cards. [ 2.037782] cpufreq-nforce2: No nForce2 chipset. [ 2.038264] cpuidle: using governor ladder [ 2.039015] cpuidle: using governor menu [ 2.039019] EFI Variables Facility v0.08 2004-May-17 [ 2.040061] TCP cubic registered [ 2.041438] NET: Registered protocol family 10 [ 2.043814] NET: Registered protocol family 17 [ 2.043823] Registering the dns_resolver key type [ 2.044290] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.044336] Using IPI No-Shortcut mode [ 2.045620] PM: Hibernation image not present or could not be loaded. [ 2.045644] registered taskstats version 1 [ 2.073070] Magic number: 4:976:796 [ 2.073415] rtc_cmos 00:07: setting system clock to 2012-07-11 18:45:23 UTC (1342032323) [ 2.076654] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.076658] EDD information not available. [ 2.302111] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.302587] ata1.00: ATA-9: M4-CT128M4SSD2, 000F, max UDMA/100 [ 2.302595] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.303143] ata1.00: configured for UDMA/100 [ 2.303453] scsi 0:0:0:0: Direct-Access ATA M4-CT128M4SSD2 000F PQ: 0 ANSI: 5 [ 2.303746] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.303920] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 2.304213] sd 0:0:0:0: [sda] Write Protect is off [ 2.304225] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.304471] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.306818] sda: sda1 sda2 < sda5 > [ 2.308780] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.318162] Refined TSC clocksource calibration: 1595.999 MHz. [ 2.318169] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 2.318178] Switching to clocksource tsc [ 2.450939] hub 1-1:1.0: USB hub found [ 2.451121] hub 1-1:1.0: 6 ports detected [ 2.561786] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 2.621757] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.636143] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-T633C, D800, max UDMA/100 [ 2.636152] ata2.00: applying bridge limits [ 2.649711] ata2.00: configured for UDMA/100 [ 2.653762] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-T633C D800 PQ: 0 ANSI: 5 [ 2.661486] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.661494] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.661890] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.662156] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.694649] hub 2-1:1.0: USB hub found [ 2.694840] hub 2-1:1.0: 8 ports detected [ 2.765823] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd [ 2.981454] ata6: SATA link down (SStatus 0 SControl 300) [ 2.982597] Freeing unused kernel memory: 740k freed [ 2.983523] Write protecting the kernel text: 5816k [ 2.983808] Write protecting the kernel read-only data: 2376k [ 2.983811] NX-protecting the kernel data: 4424k [ 3.014594] udevd[127]: starting version 175 [ 3.068925] sdhci: Secure Digital Host Controller Interface driver [ 3.068932] sdhci: Copyright(c) Pierre Ossman [ 3.069714] sdhci-pci 0000:09:00.0: SDHCI controller found [1180:e822] (rev 1) [ 3.069742] sdhci-pci 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.069786] sdhci-pci 0000:09:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 3.069798] sdhci-pci 0000:09:00.0: setting latency timer to 64 [ 3.069816] mmc0: no vmmc regulator found [ 3.069877] Registered led device: mmc0:: [ 3.070946] mmc0: SDHCI controller on PCI [0000:09:00.0] using DMA [ 3.071078] tg3.c:v3.121 (November 2, 2011) [ 3.071252] tg3 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.071269] tg3 0000:0b:00.0: setting latency timer to 64 [ 3.071403] firewire_ohci 0000:09:00.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 3.071417] firewire_ohci 0000:09:00.3: setting latency timer to 64 [ 3.078509] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 3.078517] EXT4-fs (sda1): write access will be enabled during recovery [ 3.110417] tg3 0000:0b:00.0: eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address b8:ac:6f:71:02:a6 [ 3.110425] tg3 0000:0b:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 3.110431] tg3 0000:0b:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 3.110436] tg3 0000:0b:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 3.125492] firewire_ohci: Added fw-ohci device 0000:09:00.3, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11 [ 3.390124] EXT4-fs (sda1): orphan cleanup on readonly fs [ 3.390135] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078710 [ 3.390232] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2363071 [ 3.390327] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078711 [ 3.390350] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078709 [ 3.390367] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078708 [ 3.390384] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078707 [ 3.390401] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078706 [ 3.390417] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078705 [ 3.390435] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078551 [ 3.390452] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078523 [ 3.390470] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078520 [ 3.390487] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7077901 [ 3.390551] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063272 [ 3.390562] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063266 [ 3.390572] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063261 [ 3.390582] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063256 [ 3.390592] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063255 [ 3.390602] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2363072 [ 3.390620] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2360050 [ 3.390698] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5250064 [ 3.390710] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2365394 [ 3.390728] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2365390 [ 3.390745] EXT4-fs (sda1): 22 orphan inodes deleted [ 3.390748] EXT4-fs (sda1): recovery complete [ 3.397636] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.624910] firewire_core: created device fw0: GUID 464fc000110e2661, S400 [ 3.927467] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.929965] udevd[400]: starting version 175 [ 3.933581] Adding 6278140k swap on /dev/sda5. Priority:-1 extents:1 across:6278140k SS [ 3.945183] lp: driver loaded but no devices found [ 3.999389] wmi: Mapper loaded [ 4.016696] ite_cir: Auto-detected model: ITE8708 CIR transceiver [ 4.016702] ite_cir: Using model: ITE8708 CIR transceiver [ 4.016706] ite_cir: TX-capable: 1 [ 4.016710] ite_cir: Sample period (ns): 8680 [ 4.016713] ite_cir: TX carrier frequency (Hz): 38000 [ 4.016716] ite_cir: TX duty cycle (%): 33 [ 4.016719] ite_cir: RX low carrier frequency (Hz): 0 [ 4.016722] ite_cir: RX high carrier frequency (Hz): 0 [ 4.025684] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 4.025691] Disabling lock debugging due to kernel taint [ 4.027410] IR NEC protocol handler initialized [ 4.030250] lib80211: common routines for IEEE802.11 drivers [ 4.030257] lib80211_crypt: registered algorithm 'NULL' [ 4.036024] IR RC5(x) protocol handler initialized [ 4.036092] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4.036188] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 4.036307] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 4.036361] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 4.039006] acpi device:03: registered as cooling_device10 [ 4.039164] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5 [ 4.039261] ACPI: Video Device [M86] (multi-head: yes rom: no post: no) [ 4.049753] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 4.050201] wl 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.050215] wl 0000:05:00.0: setting latency timer to 64 [ 4.052252] Registered IR keymap rc-rc6-mce [ 4.052432] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input6 [ 4.054614] IR RC6 protocol handler initialized [ 4.054787] rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0 [ 4.054839] ite_cir: driver has been successfully loaded [ 4.057338] IR JVC protocol handler initialized [ 4.061553] IR Sony protocol handler initialized [ 4.066578] input: MCE IR Keyboard/Mouse (ite-cir) as /devices/virtual/input/input7 [ 4.066724] IR MCE Keyboard/mouse protocol handler initialized [ 4.072580] lirc_dev: IR Remote Control driver registered, major 250 [ 4.073280] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0 [ 4.073286] IR LIRC bridge handler initialized [ 4.077849] Linux video capture interface: v2.00 [ 4.079402] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:640f) [ 4.085492] EDAC MC: Ver: 2.1.0 [ 4.087138] lib80211_crypt: registered algorithm 'TKIP' [ 4.091027] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 4.091733] snd_hda_intel 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.091826] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X [ 4.091861] snd_hda_intel 0000:02:00.1: setting latency timer to 64 [ 4.093115] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50 [ 4.112448] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 4.112612] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input9 [ 4.113311] type=1400 audit(1342032325.540:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=658 comm="apparmor_parser" [ 4.114501] type=1400 audit(1342032325.540:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=658 comm="apparmor_parser" [ 4.115253] type=1400 audit(1342032325.540:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=658 comm="apparmor_parser" [ 4.121870] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10 [ 4.122096] usbcore: registered new interface driver uvcvideo [ 4.122100] USB Video Class driver (1.1.1) [ 4.128729] [fglrx] Maximum main memory to use for locked dma buffers: 5840 MBytes. [ 4.129678] [fglrx] vendor: 1002 device: 68c0 count: 1 [ 4.131991] [fglrx] ioport: bar 4, base 0x2000, size: 0x100 [ 4.132015] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.132024] pci 0000:02:00.0: setting latency timer to 64 [ 4.133712] [fglrx] Kernel PAT support is enabled [ 4.133747] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [ 4.162666] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.38 [ 4.184133] device-mapper: multipath: version 1.3.0 loaded [ 4.196660] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 4.279897] input: Dell WMI hotkeys as /devices/virtual/input/input11 [ 4.292402] Bluetooth: Core ver 2.16 [ 4.292449] NET: Registered protocol family 31 [ 4.292454] Bluetooth: HCI device and connection manager initialized [ 4.292459] Bluetooth: HCI socket layer initialized [ 4.292463] Bluetooth: L2CAP socket layer initialized [ 4.292473] Bluetooth: SCO socket layer initialized [ 4.296333] Bluetooth: RFCOMM TTY layer initialized [ 4.296342] Bluetooth: RFCOMM socket layer initialized [ 4.296345] Bluetooth: RFCOMM ver 1.11 [ 4.313586] ppdev: user-space parallel port driver [ 4.316619] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.316625] Bluetooth: BNEP filters: protocol multicast [ 4.383980] type=1400 audit(1342032325.812:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=938 comm="apparmor_parser" [ 4.385173] type=1400 audit(1342032325.812:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=938 comm="apparmor_parser" [ 4.425757] init: failsafe main process (898) killed by TERM signal [ 4.477052] type=1400 audit(1342032325.904:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1011 comm="apparmor_parser" [ 4.477592] type=1400 audit(1342032325.904:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1010 comm="apparmor_parser" [ 4.478099] type=1400 audit(1342032325.904:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1017 comm="apparmor_parser" [ 4.479233] type=1400 audit(1342032325.904:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1014 comm="apparmor_parser" [ 4.510060] vesafb: mode is 1152x864x32, linelength=4608, pages=0 [ 4.510065] vesafb: scrolling: redraw [ 4.510071] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 4.510084] mtrr: no more MTRRs available [ 4.513081] vesafb: framebuffer at 0xd0000000, mapped to 0xf9400000, using 3904k, total 3904k [ 4.515203] Console: switching to colour frame buffer device 144x54 [ 4.515278] fb0: VESA VGA frame buffer device [ 4.590743] tg3 0000:0b:00.0: irq 48 for MSI/MSI-X [ 4.702009] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.704409] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.978379] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 5.030104] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12 [ 5.045782] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 5.519573] [fglrx] ATIF platform detected with notification ID: 0x81 [ 6.391466] fglrx_pci 0000:02:00.0: irq 49 for MSI/MSI-X [ 6.393137] [fglrx] Firegl kernel thread PID: 1305 [ 6.393306] [fglrx] Firegl kernel thread PID: 1306 [ 6.393472] [fglrx] Firegl kernel thread PID: 1307 [ 6.393726] [fglrx] IRQ 49 Enabled [ 6.528052] postgres (1308): /proc/1308/oom_adj is deprecated, please use /proc/1308/oom_score_adj instead. [ 6.532080] [fglrx] Gart USWC size:1280 M. [ 6.532084] [fglrx] Gart cacheable size:508 M. [ 6.532091] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 6.532094] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000 [ 6.532098] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 [ 17.423743] eth1: no IPv6 routers present [ 75.836426] warning: `proftpd' uses 32-bit capabilities (legacy support in use) [ 75.884215] init: plymouth-stop pre-start process (2922) terminated with status 1 [ 543.679614] eth1: no IPv6 routers present lsmod Module Size Used by kvm_intel 127560 0 kvm 359456 1 kvm_intel joydev 17393 0 vesafb 13516 1 parport_pc 32114 0 bnep 17830 2 ppdev 12849 0 rfcomm 38139 0 bluetooth 158438 10 bnep,rfcomm dell_wmi 12601 0 sparse_keymap 13658 1 dell_wmi binfmt_misc 17292 1 dell_laptop 17767 0 dcdbas 14098 1 dell_laptop dm_multipath 22710 0 fglrx 2909855 143 snd_hda_codec_hdmi 31775 1 psmouse 72919 0 serio_raw 13027 0 i7core_edac 23382 0 lib80211_crypt_tkip 17275 0 edac_core 46858 1 i7core_edac uvcvideo 67203 0 snd_hda_codec_idt 60251 1 videodev 86588 1 uvcvideo ir_lirc_codec 12739 0 lirc_dev 18700 1 ir_lirc_codec ir_mce_kbd_decoder 12681 0 snd_seq_midi 13132 0 ir_sony_decoder 12462 0 ir_jvc_decoder 12459 0 snd_rawmidi 25424 1 snd_seq_midi ir_rc6_decoder 12459 0 wl 2646601 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event ir_rc5_decoder 12459 0 video 19068 0 snd_hda_intel 32765 5 snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq snd_hda_codec 109562 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel rc_rc6_mce 12454 0 lib80211 14040 2 lib80211_crypt_tkip,wl snd_hwdep 13276 1 snd_hda_codec ir_nec_decoder 12459 0 snd_pcm 80845 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec ite_cir 24743 0 rc_core 21263 10 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_rc6_mce,ir_nec_decoder,ite_cir snd_timer 28931 2 snd_seq,snd_pcm wmi 18744 1 dell_wmi snd 62064 20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_rawmidi,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer mac_hid 13077 0 soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm coretemp 13269 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp tg3 141369 0 firewire_ohci 40172 0 sdhci_pci 18324 0 firewire_core 56906 1 firewire_ohci sdhci 28241 1 sdhci_pci crc_itu_t 12627 1 firewire_core lshw *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 70:f1:a1:a9:54:31 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.0.117 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0900000-f0903fff *-network description: Ethernet interface product: NetLink BCM5784M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0b:00.0 logical name: eth0 version: 10 serial: b8:ac:6f:71:02:a6 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 firmware=sb v2.19 latency=0 link=no multicast=yes port=twisted pair resources: irq:48 memory:f0d00000-f0d0ffff

  Read the article

• SOLVED Install MythTV & 11.10 on Lenovo S12 (Intel atom) with wireless

  - by keepitsimpleengineer

  This is how I installed Ubuntu 11.10 and MythTV client on my Lenovo S12 (Intel Atom) laptop and use it using WiFi (see additional notes at end). I did this because the upgrade from 11.04 bricked the laptop. Note that the partitions on the Lenovo standard disk were already in place for this installation. Also note that my LAN is setup for fixed IP addresses. Downloaded and burned 11.10 x86 Desktop Ubuntu CD Connected the power supply cord, LAN wire and the external DVD USB drive. Ran Windows XP and made sure performance level "Performance" was set and "Wireless" was enabled. Booted S12 from CD Disabled Networking from icon on upper left panel icon Edited Connections… "Wired connection 1" ? Set IP address, accepted default netmask and set gateway. Also set DNS server. Good idea to check "Connection Information" here to verify everything's O.K. Selected Install Ubuntu from the initial "Install" window Verified the three items were checked (required disk space available, plugged into a power source, & connected to the Internet) Selected Download updates while installing and third party software. Hit Continue… At wireless selected don't want to connect…WiFi…now. Continue… At Installation type, selected Something else. Continue… At partition tale, selected the ext4 Linux partition, set the mount point as "/", and marked for formatting. Here I selected the main disk (/sda) for installing the boot manager. Continue… Selected or verified my Time zone. Continue… Selected my keyboard layout. Continue… Filled in the who are you fields. Make sure password is required to sign in is checked. Continue… Chose a picture. Continue… I selected import no accounts. Continue… Wait as the Install creeps along. If your screen goes blank, tap the space bar ? apparently the screen saver/power plan does this. There are several progress bars. The longest was "Installing system", and it was the next to the last one. Installation Complete window appears, Restart Now… Wait as it stops, The screen blanks then the message "…remove…media…close tray…press enter" I just unplugged the USB DVD and hit enter… It was disheartening but the screen turned Ubuntu Purple-beige and nothing happened, so I help down the power key until it shut down, the pressed it again and the Grub Boot screen appeared. Select Ubuntu… 25.The screen went blank with the little flashing underscore cursor on it and the disk light would occasionally flash. I hit the enter key and eventuality Ubuntu started. After a somewhat long time the unity desktop appeared. 11.10, unlike earlier versions, retains the connection information. Check this by checking the network icon on the upper left applet panel. Here the touch-pad·mouse quit working and I had to reboot. It takes and extremely long time to boot, sometimes requiring several power off/ power on (cold boot). You can try to get the default network manager to work, but it might not, it didn't on mine for WiFi. Thanks to: Chris at URL here's what to do… disconnect your wired Internet connection. input your wireless information into network manager open a terminal (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "terminal". Might be a good idea to drag and drop the terminal icon to the terminal, it's easy to get rid of later. click to open a terminal, and type in: sudo rmmod acer_wmi && echo "blacklist acer_wmi" >> /etc/modprobe.d/blacklist.conf and hit enter. type in your password as asked. if you have correctly entered your WiFi information and you are near your AP, you should connect immediately if not, see the URL above ? you might need to replace "network manager" with "wicd" ? I did with 11.04. Update the new 11.10, in the upper left panel applet weird·gear icon is menu with a line about updating. It's the new way to invoke Update Manager. Your lenovo S12 (intel atom) should now run the new unity Ubuntu. Point your elbow at the ceiling and pat yourself on the back. Installing Mythbuntu Client 24.1 Open mythbuntu.org/repos (I urge you not to directly use Ubuntu Software Center for this) Install Mythbuntu Repos Save the file (in ~/Downloads, the default) Run the file ? it will update your repositories so that you will get the proper installation sources ? it will start Ubuntu Software Center to do this ? Click Install… You will need your password. Debconf window will open, select by making sure check mark is in the little box "Would you like to activate…". Forward… Which version? At the time of writing the current "Stable" version was 24.1, select 0.24.x… Forward… Read the message, then forward… Delete the downloaded file. Install synaptic (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "synaptic". Click on the synaptic icon. Ubuntu Software Center will open and allow you to install synaptic package manager. Open Synaptic (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "Synaptic". Might be a good idea to drag and drop the terminal icon to the terminal, it's easy to get rid of later. Run synaptic, read the intro, and close the intro window. Type in mythbuntu-control-centre in the Quick filter text box, and then select it "Mark for installation" by clicking on the box next to it's name. Marvel at the additional to be installed items, then select "?Mark"… At the top of the synaptic window click on the "? Apply" button. Marvel at the amount of stuff to be installed, the click on "Apply". When finished, close finished window and synaptic. Open mythbuntu-control-centre (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "mythbuntu". Might be a good idea to drag and drop the mythbuntu-control-centre icon to the terminal, it's easy to get rid of later. You can now configure and install the frontend. Go down the icon totem on the right side of the window and click as needed… System roles. ? No Backend, Desktop Frontend, and Ubuntu Desktop. Apply… & Apply changes… & Password… MySQL Configuration ? from backend ? Setup General Alt-N(ext) Alt-N(ext) Stetting Access Setup PIN code: ~~~~ Input Security key and click "Test Connection", if ?, then Apply… & Apply… {note: for some inexplicable reason, control centre hung on this, but when I restarted it, it was set properly} Graphics drivers, When I did this, only the Broadcom wireless driver showed up. I closed without doing anything. Services. I enabled SSH & Samba. Apply… & Apply… Repositories. Asked & Answered. MythExport. Pass, I believe it requires backend on the same system. Proprietary Codec Support. Check to enable, Apply… & Apply… System Updates. No action necessary, will be a part of the Ubuntu update mechanism. Themes and Artwork. For themes, I selected Enable/Update all. Apply… & Apply… Infrared & Startup behavior and Plugins. Defer until you know more. Close software centre. Open mythTV (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "mythTV". Might be a good idea to drag and drop the mythTV icon to the terminal, it's easy to get rid of later. Incorrect Group Membership. Fix this by clicking "Yes"… Log out/end. Do this by clicking "Yes"… For my Lenovo S12, I had to manually restart Ubuntu - and still with the very long restart…/no start/cold boot/reboot/pressing the shift key required Open mythTV (unity dash, top of icon totem, open, and make sure the ruler&pen icon on the bottom is selected, 2nd from left) type in "mythTV". Might be a good idea to drag and drop the mythTV icon to the terminal, it's easy to get rid of later. Will open with Select country & language. Do so. then get message with "No", hit "Ok" and arrive at the data base Configuration 1/2 screen. You will need your brackend password, from backend ? Setup General Database Configuration 1/2 Password:~? Enter this Hit Alt-n to go to the next page. Select "Use custom id…", then enter a custom ID, I use the machine's name. Hit finish, and MythTV should start up with all default settings. For the lenovo S12, the first thing you want to do is to set Playback profiles to "Normal". From Setup TV Settings Playback Alt-N(ext) Alt-N(ext) Playback Profiles (3/8) : Change Current Video Playback Profile to "Normal". You can fiddle with this setting later. For the lenovo S12, the second thing is to get the sound going. From Setup General Alt-N(ext) Alt-N(ext) Alt-N(ext) Audio System: The top of the screen is a button title "Scan for audio devices", move the highlight there and press the Space bar. Then Tab down to Audio Output Device: and left-right arrow until "ALSA:hw:Card=Intel,DEV=0" is selected. Then Alt-N(ext) until "Finish". Now you should have sound. You should now have MythTV working nicely on the Lenovo S12 Notes about wireless: Running Lenovo S12 on wireless is demanding on both power and WiFi connection. Best results will be obtained when running on power and wired connection. I run my S12 on wireless, actually two serial connections with two access points, something that is not easy to achieve. Here Mythbuntu client-server (in den) <? wireless link 1 <?office LAN? wireless link 2 <? Lenovo S12 Ubuntu 11.10 The office LAN is fixed IP behind an Untangle firewall router. There is another MythTV client on Ubuntu 10.10 computer in the office (which has always worked well). ProblemMythbuntu\Win7 client hangs with frozen frames, short segment of audio repeating. Hardware Rosewill RNX-G300EX IEEE 802.11b/g PCI Wireless Card on client-server 2 Linksys WRT54GL wireless broadband routers on LAN for link1 and link 2 WRT54GL FirmwareDD-WRT v24-sp2(07/22/09) voip set up to act as an access point. Note? many people advised this was an unworkable scheme, and in probably most cases it will be. Solution? Set up DD-WRT with the following Wireless settings… Basic Channel: Different fixed channels at least 4 difference, I use 6 & 11 Basic Sensitivity Range (ACK timing): 50 MAC filter use filter: Enable, Selected Permit only clients listed to access… Requires adding MAC addresses in "Edit MAC Filter List" This causes the 54GL's to ignore any but the listed MAC address, down side, no "guest" capability. Advanced Basic rate: All Advanced CTS Protection Mode: Off Advanced Frame Burst: Enable Advanced Max associate clients: 4 for client link 2, 1 for client-server link 1 Advanced AP isolation: Enable Advanced Preamble: Short Advanced Afterburner: On Advanced Wireless GUI access: Off Advanced WMM support: Off Other settings: default for supplied firmware. Why I suspect this worked? The 54GL Access Points's with the firmware's setting are set to handle a multiple client, wide area situation. With these mods I reconfigured them for a small area, few client situation, disabling Advanced WMM probably the most important. In addition, the client mythtv when used all other users of its access point are turned off except for a Skype phone. Also, the client-server is set up to allow other connections though it's LAN connection, and these are used to connect the TV and disc players, not used when client is being used.

  Read the article

• ?11gR2 RAC???ASM DISK Path????

  - by Liu Maclean(???)

  ????T.askmaclean.com???????11gR2?ASM DISK?????,??????: aix 6.1,grid 11.2.0.3+asm11.2.0.3+rac ???????????aix????????mpio,??diskgroup ?????veritas dmp???,?????asm?disk_strings=/dev/vx/rdmp/*,crs/asm??????????????/dev/vx/rdmp/?????,?????????diskgroup??? crs???????:2012-07-13 15:07:29.748: [ GPNP][1286]clsgpnp_profileCallUrlInt: [at clsgpnp.c:2108 clsgpnp_profileCallUrlInt] get-profile call to url “ipc://GPNPD_ggtest1? disco “” [f=0 claimed- host: cname: seq: auth:]2012-07-13 15:07:29.762: [ GPNP][1286]clsgpnp_profileCallUrlInt: [at clsgpnp.c:2236 clsgpnp_profileCallUrlInt] Result: (0) CLSGPNP_OK. Successful get-profile CALL to remote “ipc://GPNPD_ggtest1? disco “”2012-07-13 15:07:29.762: [ CSSD][1286]clssnmReadDiscoveryProfile: voting file discovery string(/dev/vx/rdmp/*)2012-07-13 15:07:29.762: [ CSSD][1286]clssnmvDDiscThread: using discovery string /dev/vx/rdmp/* for initial discovery2012-07-13 15:07:29.762: [ SKGFD][1286]Discovery with str:/dev/vx/rdmp/*: 2012-07-13 15:07:29.762: [ SKGFD][1286]UFS discovery with :/dev/vx/rdmp/*: 2012-07-13 15:07:29.769: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_919: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_212: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_211: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_210: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_209: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_181: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_180: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_3: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_2: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_1: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_0: 2012-07-13 15:07:29.771: [ SKGFD][1286]OSS discovery with :/dev/vx/rdmp/*: 2012-07-13 15:07:29.771: [ SKGFD][1286]Handle 1115e7510 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_916: 2012-07-13 15:07:29.772: [ SKGFD][1286]Handle 1118758b0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_912: 2012-07-13 15:07:29.773: [ SKGFD][1286]Handle 1118d9cf0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_908: 2012-07-13 15:07:29.773: [ SKGFD][1286]Handle 1118da450 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_904: 2012-07-13 15:07:29.773: [ SKGFD][1286]Handle 1118dad70 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_903: 2012-07-13 15:07:29.802: [ CLSF][1286]checksum failed for disk:/dev/vx/rdmp/v_df8000_916:2012-07-13 15:07:29.803: [ SKGFD][1286]Lib :UFS:: closing handle 1115e7510 for disk :/dev/vx/rdmp/v_df8000_916: 2012-07-13 15:07:29.803: [ SKGFD][1286]Lib :UFS:: closing handle 1118758b0 for disk :/dev/vx/rdmp/v_df8000_912: 2012-07-13 15:07:29.804: [ SKGFD][1286]Handle 1115e6710 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_202: 2012-07-13 15:07:29.808: [ SKGFD][1286]Handle 1115e7030 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_201: 2012-07-13 15:07:29.809: [ SKGFD][1286]Handle 1115e7ad0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_200: 2012-07-13 15:07:29.809: [ SKGFD][1286]Handle 1118733f0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_199: 2012-07-13 15:07:29.816: [ CLSF][1286]checksum failed for disk:/dev/vx/rdmp/v_df8000_186:2012-07-13 15:07:29.816: [ SKGFD][1286]Lib :UFS:: closing handle 1118de5d0 for disk :/dev/vx/rdmp/v_df8000_186: 2012-07-13 15:07:29.816: [ CSSD][1286]clssnmvDiskVerify: Successful discovery of 0 disks2012-07-13 15:07:29.816: [ CSSD][1286]clssnmCompleteInitVFDiscovery: Completing initial voting file discovery2012-07-13 15:07:29.816: [ CSSD][1286]clssnmvFindInitialConfigs: No voting files found2012-07-13 15:07:29.816: [ CSSD][1286](:CSSNM00070:)clssnmCompleteInitVFDiscovery: Voting file not found. Retrying discovery in 15 seconds2012-07-13 15:07:30.169: [ CSSD][1029]clssgmExecuteClientRequest(): type(37) size(80) only connect and exit messages are allowed before lease acquisition proc(1115e4870) client(0) ??????ASM DISK PATH???????,????11gR2 RAC+ASM????,??CRS??????,????crsctl start crs -excl -nocrs???????CSS???ASM??, ???????(clssnmCompleteInitVFDiscovery: Voting file not found),????Voteing file????????????????? ?????????,???????11gR2 RAC+ASM??ASM DISK??: 1.?????????ASM DISK?????,??????UDEV????????,???UDEV????ASM DISK?/dev/asm-disk* ??? /dev/rasm-disk*???, ??????udev rule??????: [grid@maclean1 ~]$ export ORACLE_HOME=/g01/grid/app/11.2.0/grid [grid@maclean1 ~]$ /g01/grid/app/11.2.0/grid/bin/sqlplus / as sysasm SQL*Plus: Release 11.2.0.3.0 Production on Sun Jul 15 04:09:28 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options SQL> show parameter diskstri NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ asm_diskstring string /dev/asm* ??????ASM?????asm_diskstring ?/dev/asm*, ???root????UDEV RULE?? : [root@maclean1 rules.d]# cp 99-oracle-asmdevices.rules 99-oracle-asmdevices.rules.bak [root@maclean1 rules.d]# vi 99-oracle-asmdevices.rules [root@maclean1 rules.d]# cat 99-oracle-asmdevices.rules KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB09cadb31-cfbea255_", NAME="rasm-diskb", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB5f097069-59efb82f_", NAME="rasm-diskc", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB4e1a81c0-20478bc4_", NAME="rasm-diskd", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VBdcce9285-b13c5a27_", NAME="rasm-diske", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB82effe1a-dbca7dff_", NAME="rasm-diskf", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB950d279f-c581cb51_", NAME="rasm-diskg", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB14400d81-651672d7_", NAME="rasm-diskh", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB31b1237b-78aa22bb_", NAME="rasm-diski", OWNER="grid", GROUP="asmadmin", MODE="0660" ???????99-oracle-asmdevices.rules?UDEV RULE????,??????????/dev/rasm-disk*???,??????ASM DISK???, ????????????????RAC CRS??????? ??????votedisk?ocr ????: [root@maclean1 rules.d]# /g01/grid/app/11.2.0/grid/bin/crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE 6896bfc3d1464f9fbf0ea9df87e023ad (/dev/asm-diskb) [SYSTEMDG] 2. ONLINE 58eb81b656084ff2bfd315d9badd08b7 (/dev/asm-diskc) [SYSTEMDG] 3. ONLINE 6bf7324625c54f3abf2c942b1e7f70d9 (/dev/asm-diskd) [SYSTEMDG] 4. ONLINE 43ad8ae20c354f5ebf7083bc30bf94cc (/dev/asm-diske) [SYSTEMDG] 5. ONLINE 4c225359d51b4f93bfba01080664b3d7 (/dev/asm-diskf) [SYSTEMDG] Located 5 voting disk(s). [root@maclean1 rules.d]# /g01/grid/app/11.2.0/grid/bin/ocrcheck Status of Oracle Cluster Registry is as follows : Version : 3 Total space (kbytes) : 262120 Used space (kbytes) : 2844 Available space (kbytes) : 259276 ID : 879001605 Device/File Name : +SYSTEMDG Device/File integrity check succeeded Device/File not configured Device/File not configured Device/File not configured Device/File not configured Cluster registry integrity check succeeded Logical corruption check succeeded ??votedisk file?????????ASM DISK,?????????crsctl replace votedisk, ??????LINUX OS: [root@maclean1 rules.d]# init 6 rebooting ............ [root@maclean1 dev]# ls -l *asm* brw-rw---- 1 grid asmadmin 8, 16 Jul 15 04:15 rasm-diskb brw-rw---- 1 grid asmadmin 8, 32 Jul 15 04:15 rasm-diskc brw-rw---- 1 grid asmadmin 8, 48 Jul 15 04:15 rasm-diskd brw-rw---- 1 grid asmadmin 8, 64 Jul 15 04:15 rasm-diske brw-rw---- 1 grid asmadmin 8, 80 Jul 15 04:15 rasm-diskf brw-rw---- 1 grid asmadmin 8, 96 Jul 15 04:15 rasm-diskg brw-rw---- 1 grid asmadmin 8, 112 Jul 15 04:15 rasm-diskh brw-rw---- 1 grid asmadmin 8, 128 Jul 15 04:15 rasm-diski ??????????/dev/rasm-disk*?ASM DISK,??ASM??????css?????/dev/asm*?????ASM DISK,??????????????ASM DISK: more /g01/grid/app/11.2.0/grid/log/maclean1/cssd/ocssd.log 2012-07-15 04:17:45.208: [ SKGFD][1099548992]Discovery with str:/dev/asm*: 2012-07-15 04:17:45.208: [ SKGFD][1099548992]UFS discovery with :/dev/asm*: 2012-07-15 04:17:45.208: [ SKGFD][1099548992]OSS discovery with :/dev/asm*: 2012-07-15 04:17:45.208: [ CSSD][1099548992]clssnmvDiskVerify: Successful discovery of 0 disks 2012-07-15 04:17:45.208: [ CSSD][1099548992]clssnmCompleteInitVFDiscovery: Completing initial voting file discovery 2012-07-15 04:17:45.208: [ CSSD][1099548992]clssnmvFindInitialConfigs: No voting files found 2012-07-15 04:17:45.208: [ CSSD][1099548992](:CSSNM00070:)clssnmCompleteInitVFDiscovery: Voting file not found. Retrying discovery in 15 seconds 2012-07-15 04:17:45.251: [ CSSD][1096661312]clssgmExecuteClientRequest(): type(37) size(80) only connect and exit messages are allowed before lease acquisition proc(0x26a8ba0) client((nil)) 2012-07-15 04:17:45.251: [ CSSD][1096661312]clssgmDeadProc: proc 0x26a8ba0 2012-07-15 04:17:45.251: [ CSSD][1096661312]clssgmDestroyProc: cleaning up proc(0x26a8ba0) con(0xfe6) skgpid ospid 3751 with 0 clients, refcount 0 2012-07-15 04:17:45.252: [ CSSD][1096661312]clssgmDiscEndpcl: gipcDestroy 0xfe6 2012-07-15 04:17:45.829: [ CSSD][1096661312]clssscSelect: cookie accept request 0x2318ea0 2012-07-15 04:17:45.829: [ CSSD][1096661312]clssgmAllocProc: (0x2659480) allocated 2012-07-15 04:17:45.830: [ CSSD][1096661312]clssgmClientConnectMsg: properties of cmProc 0x2659480 - 1,2,3,4,5 2012-07-15 04:17:45.830: [ CSSD][1096661312]clssgmClientConnectMsg: Connect from con(0x114e) proc(0x2659480) pid(3751) version 11:2:1:4, properties: 1,2,3,4,5 2012-07-15 04:17:45.830: [ CSSD][1096661312]clssgmClientConnectMsg: msg flags 0x0000 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssscSelect: cookie accept request 0x253ddd0 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssscevtypSHRCON: getting client with cmproc 0x253ddd0 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssgmRegisterClient: proc(3/0x253ddd0), client(61/0x26877b0) 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssgmExecuteClientRequest(): type(6) size(684) only connect and exit messages are  allowed before lease acquisition proc(0x253ddd0) client(0x26877b0) 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssgmDiscEndpcl: gipcDestroy 0x1174 2012-07-15 04:17:46.070: [ CSSD][1096661312]clssscSelect: cookie accept request 0x26368a0 2012-07-15 04:17:46.070: [ CSSD][1096661312]clssscevtypSHRCON: getting client with cmproc 0x26368a0 2012-07-15 04:17:46.070: [ CSSD][1096661312]clssgmRegisterClient: proc(5/0x26368a0), client(50/0x26877b0) ??11gR2?CRS?????ASM,??ocr???ASM?,??ASM???????,???CRS?????????: [root@maclean1 ~]# crsctl check has CRS-4638: Oracle High Availability Services is online [root@maclean1 ~]# crsctl check crs CRS-4638: Oracle High Availability Services is online CRS-4535: Cannot communicate with Cluster Ready Services CRS-4530: Communications failure contacting Cluster Synchronization Services daemon CRS-4534: Cannot communicate with Event Manager 2. ?????ASM DISK PATH???????,?????????????CRS: ??????OHASD??: [root@maclean1 ~]# crsctl stop has -f CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'maclean1' CRS-2673: Attempting to stop 'ora.mdnsd' on 'maclean1' CRS-2673: Attempting to stop 'ora.crf' on 'maclean1' CRS-2677: Stop of 'ora.mdnsd' on 'maclean1' succeeded CRS-2677: Stop of 'ora.crf' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gipcd' on 'maclean1' CRS-2677: Stop of 'ora.gipcd' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gpnpd' on 'maclean1' CRS-2677: Stop of 'ora.gpnpd' on 'maclean1' succeeded CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'maclean1' has completed CRS-4133: Oracle High Availability Services has been stopped. 3. ?-excl -nocrs????CRS,?????ASM ???????CRS??: [root@maclean1 ~]# crsctl start crs -excl -nocrs  CRS-4123: Oracle High Availability Services has been started. CRS-2672: Attempting to start 'ora.mdnsd' on 'maclean1' CRS-2676: Start of 'ora.mdnsd' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.gpnpd' on 'maclean1' CRS-2676: Start of 'ora.gpnpd' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.cssdmonitor' on 'maclean1' CRS-2672: Attempting to start 'ora.gipcd' on 'maclean1' CRS-2676: Start of 'ora.cssdmonitor' on 'maclean1' succeeded CRS-2676: Start of 'ora.gipcd' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.cssd' on 'maclean1' CRS-2672: Attempting to start 'ora.diskmon' on 'maclean1' CRS-2676: Start of 'ora.diskmon' on 'maclean1' succeeded CRS-2676: Start of 'ora.cssd' on 'maclean1' succeeded CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'maclean1' CRS-2672: Attempting to start 'ora.ctssd' on 'maclean1' CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'maclean1' CRS-2676: Start of 'ora.ctssd' on 'maclean1' succeeded CRS-2676: Start of 'ora.cluster_interconnect.haip' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.asm' on 'maclean1' CRS-2676: Start of 'ora.asm' on 'maclean1' succeeded #??????CRS_HOME???ORACLE_BASE?777??,??????? [root@maclean1 ~]# chmod 777 /g01 4.??ASM???disk_strings????ASM DISK PATH??: [root@maclean1 ~]# su - grid [grid@maclean1 ~]$ sqlplus / as sysasm SQL*Plus: Release 11.2.0.3.0 Production on Sun Jul 15 04:40:40 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options SQL> alter system set asm_diskstring='/dev/rasm*'; System altered. SQL> alter diskgroup systemdg mount; Diskgroup altered. SQL> create spfile from memory; File created. SQL> startup force mount; ORA-32004: obsolete or deprecated parameter(s) specified for ASM instance ASM instance started Total System Global Area 283930624 bytes Fixed Size 2227664 bytes Variable Size 256537136 bytes ASM Cache 25165824 bytes ASM diskgroups mounted SQL> show parameter spfile NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ spfile string /g01/grid/app/11.2.0/grid/dbs/ spfile+ASM1.ora SQL> show parameter disk NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ asm_diskgroups string SYSTEMDG asm_diskstring string /dev/rasm* SQL> create pfile from spfile; File created. SQL> create spfile='+SYSTEMDG' from pfile; File created. SQL> startup force; ORA-32004: obsolete or deprecated parameter(s) specified for ASM instance ASM instance started Total System Global Area 283930624 bytes Fixed Size 2227664 bytes Variable Size 256537136 bytes ASM Cache 25165824 bytes ASM diskgroups mounted SQL> show parameter spfile NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ spfile string +SYSTEMDG/maclean-cluster/asmp arameterfile/registry.253.7886 82933 ???????asm_diskstring ,????ASM DISKGROUP??SPFILE , ??ASM?????SPFILE?????????????????? 5. crsctl replace votedisk ???votedisk????: [root@maclean1 ~]# crsctl replace votedisk +systemdg Successful addition of voting disk 864a00efcfbe4f42bfd0f4f6b60472a0. Successful addition of voting disk ab14d6e727614f29bf53b9870052a5c8. Successful addition of voting disk 754c03c168854f46bf2daee7287bf260. Successful addition of voting disk 9ed58f37f3e84f28bfcd9b101f2af9f3. Successful addition of voting disk 4ce7b7c682364f12bf4df5ce1fb7814e. Successfully replaced voting disk group with +systemdg. CRS-4266: Voting file(s) successfully replaced [root@maclean1 ~]# crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE 864a00efcfbe4f42bfd0f4f6b60472a0 (/dev/rasm-diskb) [SYSTEMDG] 2. ONLINE ab14d6e727614f29bf53b9870052a5c8 (/dev/rasm-diskc) [SYSTEMDG] 3. ONLINE 754c03c168854f46bf2daee7287bf260 (/dev/rasm-diskd) [SYSTEMDG] 4. ONLINE 9ed58f37f3e84f28bfcd9b101f2af9f3 (/dev/rasm-diske) [SYSTEMDG] 5. ONLINE 4ce7b7c682364f12bf4df5ce1fb7814e (/dev/rasm-diskf) [SYSTEMDG] Located 5 voting disk(s). [root@maclean1 ~]# ocrcheck Status of Oracle Cluster Registry is as follows : Version : 3 Total space (kbytes) : 262120 Used space (kbytes) : 2844 Available space (kbytes) : 259276 ID : 879001605 Device/File Name : +SYSTEMDG Device/File integrity check succeeded Device/File not configured Device/File not configured Device/File not configured Device/File not configured Cluster registry integrity check succeeded Logical corruption check succeeded ??replace?votedisk??? ASM DISK?,???votedisk?OCR??????? 6.??CRS??: [root@maclean1 ~]# crsctl stop crs CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'maclean1' CRS-2673: Attempting to stop 'ora.mdnsd' on 'maclean1' CRS-2673: Attempting to stop 'ora.ctssd' on 'maclean1' CRS-2673: Attempting to stop 'ora.asm' on 'maclean1' CRS-2677: Stop of 'ora.mdnsd' on 'maclean1' succeeded CRS-2677: Stop of 'ora.asm' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.cluster_interconnect.haip' on 'maclean1' CRS-2677: Stop of 'ora.ctssd' on 'maclean1' succeeded CRS-2677: Stop of 'ora.cluster_interconnect.haip' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.cssd' on 'maclean1' CRS-2677: Stop of 'ora.cssd' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gipcd' on 'maclean1' CRS-2677: Stop of 'ora.gipcd' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gpnpd' on 'maclean1' CRS-2677: Stop of 'ora.gpnpd' on 'maclean1' succeeded CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'maclean1' has completed CRS-4133: Oracle High Availability Services has been stopped. [root@maclean1 ~]# crsctl stat res -t -------------------------------------------------------------------------------- NAME TARGET STATE SERVER STATE_DETAILS -------------------------------------------------------------------------------- Local Resources -------------------------------------------------------------------------------- ora.BACKUPDG.dg ONLINE ONLINE maclean1 ora.DATA.dg ONLINE ONLINE maclean1 ora.LISTENER.lsnr ONLINE ONLINE maclean1 ora.SYSTEMDG.dg ONLINE ONLINE maclean1 ora.asm ONLINE ONLINE maclean1 Started ora.gsd OFFLINE OFFLINE maclean1 ora.net1.network ONLINE ONLINE maclean1 ora.ons ONLINE ONLINE maclean1 -------------------------------------------------------------------------------- Cluster Resources -------------------------------------------------------------------------------- ora.LISTENER_SCAN1.lsnr 1 ONLINE ONLINE maclean1 ora.cvu 1 ONLINE ONLINE maclean1 ora.maclean1.vip 1 ONLINE ONLINE maclean1 ora.maclean2.vip 1 ONLINE INTERMEDIATE maclean1 FAILED OVER ora.oc4j 1 ONLINE OFFLINE STARTING ora.prod.db 1 ONLINE OFFLINE Instance Shutdown,S TARTING 2 ONLINE OFFLINE ora.scan1.vip 1 ONLINE ONLINE maclean1 ???????ASM?????SPFILE,???????????????,?????CRS??????? ??11gR2 RAC+ASM?????????,????????????????ASM DISK PATH?????????, ???????????????,????!

  Read the article

• ?11gR2 RAC???ASM DISK Path????

  - by Liu Maclean(???)

  ????T.askmaclean.com???????11gR2?ASM DISK?????,??????: aix 6.1,grid 11.2.0.3+asm11.2.0.3+rac ???????????aix????????mpio,??diskgroup ?????veritas dmp???,?????asm?disk_strings=/dev/vx/rdmp/*,crs/asm??????????????/dev/vx/rdmp/?????,?????????diskgroup??? crs???????:2012-07-13 15:07:29.748: [ GPNP][1286]clsgpnp_profileCallUrlInt: [at clsgpnp.c:2108 clsgpnp_profileCallUrlInt] get-profile call to url “ipc://GPNPD_ggtest1? disco “” [f=0 claimed- host: cname: seq: auth:]2012-07-13 15:07:29.762: [ GPNP][1286]clsgpnp_profileCallUrlInt: [at clsgpnp.c:2236 clsgpnp_profileCallUrlInt] Result: (0) CLSGPNP_OK. Successful get-profile CALL to remote “ipc://GPNPD_ggtest1? disco “”2012-07-13 15:07:29.762: [ CSSD][1286]clssnmReadDiscoveryProfile: voting file discovery string(/dev/vx/rdmp/*)2012-07-13 15:07:29.762: [ CSSD][1286]clssnmvDDiscThread: using discovery string /dev/vx/rdmp/* for initial discovery2012-07-13 15:07:29.762: [ SKGFD][1286]Discovery with str:/dev/vx/rdmp/*: 2012-07-13 15:07:29.762: [ SKGFD][1286]UFS discovery with :/dev/vx/rdmp/*: 2012-07-13 15:07:29.769: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_919: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_212: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_211: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_210: 2012-07-13 15:07:29.770: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_209: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_181: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/v_df8000_180: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_3: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_2: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_1: 2012-07-13 15:07:29.771: [ SKGFD][1286]Fetching UFS disk :/dev/vx/rdmp/disk_0: 2012-07-13 15:07:29.771: [ SKGFD][1286]OSS discovery with :/dev/vx/rdmp/*: 2012-07-13 15:07:29.771: [ SKGFD][1286]Handle 1115e7510 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_916: 2012-07-13 15:07:29.772: [ SKGFD][1286]Handle 1118758b0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_912: 2012-07-13 15:07:29.773: [ SKGFD][1286]Handle 1118d9cf0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_908: 2012-07-13 15:07:29.773: [ SKGFD][1286]Handle 1118da450 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_904: 2012-07-13 15:07:29.773: [ SKGFD][1286]Handle 1118dad70 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_903: 2012-07-13 15:07:29.802: [ CLSF][1286]checksum failed for disk:/dev/vx/rdmp/v_df8000_916:2012-07-13 15:07:29.803: [ SKGFD][1286]Lib :UFS:: closing handle 1115e7510 for disk :/dev/vx/rdmp/v_df8000_916: 2012-07-13 15:07:29.803: [ SKGFD][1286]Lib :UFS:: closing handle 1118758b0 for disk :/dev/vx/rdmp/v_df8000_912: 2012-07-13 15:07:29.804: [ SKGFD][1286]Handle 1115e6710 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_202: 2012-07-13 15:07:29.808: [ SKGFD][1286]Handle 1115e7030 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_201: 2012-07-13 15:07:29.809: [ SKGFD][1286]Handle 1115e7ad0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_200: 2012-07-13 15:07:29.809: [ SKGFD][1286]Handle 1118733f0 from lib :UFS:: for disk :/dev/vx/rdmp/v_df8000_199: 2012-07-13 15:07:29.816: [ CLSF][1286]checksum failed for disk:/dev/vx/rdmp/v_df8000_186:2012-07-13 15:07:29.816: [ SKGFD][1286]Lib :UFS:: closing handle 1118de5d0 for disk :/dev/vx/rdmp/v_df8000_186: 2012-07-13 15:07:29.816: [ CSSD][1286]clssnmvDiskVerify: Successful discovery of 0 disks2012-07-13 15:07:29.816: [ CSSD][1286]clssnmCompleteInitVFDiscovery: Completing initial voting file discovery2012-07-13 15:07:29.816: [ CSSD][1286]clssnmvFindInitialConfigs: No voting files found2012-07-13 15:07:29.816: [ CSSD][1286](:CSSNM00070:)clssnmCompleteInitVFDiscovery: Voting file not found. Retrying discovery in 15 seconds2012-07-13 15:07:30.169: [ CSSD][1029]clssgmExecuteClientRequest(): type(37) size(80) only connect and exit messages are allowed before lease acquisition proc(1115e4870) client(0) ??????ASM DISK PATH???????,????11gR2 RAC+ASM????,??CRS??????,????crsctl start crs -excl -nocrs???????CSS???ASM??, ???????(clssnmCompleteInitVFDiscovery: Voting file not found),????Voteing file????????????????? ?????????,???????11gR2 RAC+ASM??ASM DISK??: 1.?????????ASM DISK?????,??????UDEV????????,???UDEV????ASM DISK?/dev/asm-disk* ??? /dev/rasm-disk*???, ??????udev rule??????: [grid@maclean1 ~]$ export ORACLE_HOME=/g01/grid/app/11.2.0/grid [grid@maclean1 ~]$ /g01/grid/app/11.2.0/grid/bin/sqlplus / as sysasm SQL*Plus: Release 11.2.0.3.0 Production on Sun Jul 15 04:09:28 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options SQL> show parameter diskstri NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ asm_diskstring string /dev/asm* ??????ASM?????asm_diskstring ?/dev/asm*, ???root????UDEV RULE?? : [root@maclean1 rules.d]# cp 99-oracle-asmdevices.rules 99-oracle-asmdevices.rules.bak [root@maclean1 rules.d]# vi 99-oracle-asmdevices.rules [root@maclean1 rules.d]# cat 99-oracle-asmdevices.rules KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB09cadb31-cfbea255_", NAME="rasm-diskb", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB5f097069-59efb82f_", NAME="rasm-diskc", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB4e1a81c0-20478bc4_", NAME="rasm-diskd", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VBdcce9285-b13c5a27_", NAME="rasm-diske", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB82effe1a-dbca7dff_", NAME="rasm-diskf", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB950d279f-c581cb51_", NAME="rasm-diskg", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB14400d81-651672d7_", NAME="rasm-diskh", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p", RESULT=="SATA_VBOX_HARDDISK_VB31b1237b-78aa22bb_", NAME="rasm-diski", OWNER="grid", GROUP="asmadmin", MODE="0660" ???????99-oracle-asmdevices.rules?UDEV RULE????,??????????/dev/rasm-disk*???,??????ASM DISK???, ????????????????RAC CRS??????? ??????votedisk?ocr ????: [root@maclean1 rules.d]# /g01/grid/app/11.2.0/grid/bin/crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE 6896bfc3d1464f9fbf0ea9df87e023ad (/dev/asm-diskb) [SYSTEMDG] 2. ONLINE 58eb81b656084ff2bfd315d9badd08b7 (/dev/asm-diskc) [SYSTEMDG] 3. ONLINE 6bf7324625c54f3abf2c942b1e7f70d9 (/dev/asm-diskd) [SYSTEMDG] 4. ONLINE 43ad8ae20c354f5ebf7083bc30bf94cc (/dev/asm-diske) [SYSTEMDG] 5. ONLINE 4c225359d51b4f93bfba01080664b3d7 (/dev/asm-diskf) [SYSTEMDG] Located 5 voting disk(s). [root@maclean1 rules.d]# /g01/grid/app/11.2.0/grid/bin/ocrcheck Status of Oracle Cluster Registry is as follows : Version : 3 Total space (kbytes) : 262120 Used space (kbytes) : 2844 Available space (kbytes) : 259276 ID : 879001605 Device/File Name : +SYSTEMDG Device/File integrity check succeeded Device/File not configured Device/File not configured Device/File not configured Device/File not configured Cluster registry integrity check succeeded Logical corruption check succeeded ??votedisk file?????????ASM DISK,?????????crsctl replace votedisk, ??????LINUX OS: [root@maclean1 rules.d]# init 6 rebooting ............ [root@maclean1 dev]# ls -l *asm* brw-rw---- 1 grid asmadmin 8, 16 Jul 15 04:15 rasm-diskb brw-rw---- 1 grid asmadmin 8, 32 Jul 15 04:15 rasm-diskc brw-rw---- 1 grid asmadmin 8, 48 Jul 15 04:15 rasm-diskd brw-rw---- 1 grid asmadmin 8, 64 Jul 15 04:15 rasm-diske brw-rw---- 1 grid asmadmin 8, 80 Jul 15 04:15 rasm-diskf brw-rw---- 1 grid asmadmin 8, 96 Jul 15 04:15 rasm-diskg brw-rw---- 1 grid asmadmin 8, 112 Jul 15 04:15 rasm-diskh brw-rw---- 1 grid asmadmin 8, 128 Jul 15 04:15 rasm-diski ??????????/dev/rasm-disk*?ASM DISK,??ASM??????css?????/dev/asm*?????ASM DISK,??????????????ASM DISK: more /g01/grid/app/11.2.0/grid/log/maclean1/cssd/ocssd.log 2012-07-15 04:17:45.208: [ SKGFD][1099548992]Discovery with str:/dev/asm*: 2012-07-15 04:17:45.208: [ SKGFD][1099548992]UFS discovery with :/dev/asm*: 2012-07-15 04:17:45.208: [ SKGFD][1099548992]OSS discovery with :/dev/asm*: 2012-07-15 04:17:45.208: [ CSSD][1099548992]clssnmvDiskVerify: Successful discovery of 0 disks 2012-07-15 04:17:45.208: [ CSSD][1099548992]clssnmCompleteInitVFDiscovery: Completing initial voting file discovery 2012-07-15 04:17:45.208: [ CSSD][1099548992]clssnmvFindInitialConfigs: No voting files found 2012-07-15 04:17:45.208: [ CSSD][1099548992](:CSSNM00070:)clssnmCompleteInitVFDiscovery: Voting file not found. Retrying discovery in 15 seconds 2012-07-15 04:17:45.251: [ CSSD][1096661312]clssgmExecuteClientRequest(): type(37) size(80) only connect and exit messages are allowed before lease acquisition proc(0x26a8ba0) client((nil)) 2012-07-15 04:17:45.251: [ CSSD][1096661312]clssgmDeadProc: proc 0x26a8ba0 2012-07-15 04:17:45.251: [ CSSD][1096661312]clssgmDestroyProc: cleaning up proc(0x26a8ba0) con(0xfe6) skgpid ospid 3751 with 0 clients, refcount 0 2012-07-15 04:17:45.252: [ CSSD][1096661312]clssgmDiscEndpcl: gipcDestroy 0xfe6 2012-07-15 04:17:45.829: [ CSSD][1096661312]clssscSelect: cookie accept request 0x2318ea0 2012-07-15 04:17:45.829: [ CSSD][1096661312]clssgmAllocProc: (0x2659480) allocated 2012-07-15 04:17:45.830: [ CSSD][1096661312]clssgmClientConnectMsg: properties of cmProc 0x2659480 - 1,2,3,4,5 2012-07-15 04:17:45.830: [ CSSD][1096661312]clssgmClientConnectMsg: Connect from con(0x114e) proc(0x2659480) pid(3751) version 11:2:1:4, properties: 1,2,3,4,5 2012-07-15 04:17:45.830: [ CSSD][1096661312]clssgmClientConnectMsg: msg flags 0x0000 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssscSelect: cookie accept request 0x253ddd0 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssscevtypSHRCON: getting client with cmproc 0x253ddd0 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssgmRegisterClient: proc(3/0x253ddd0), client(61/0x26877b0) 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssgmExecuteClientRequest(): type(6) size(684) only connect and exit messages are  allowed before lease acquisition proc(0x253ddd0) client(0x26877b0) 2012-07-15 04:17:45.939: [ CSSD][1096661312]clssgmDiscEndpcl: gipcDestroy 0x1174 2012-07-15 04:17:46.070: [ CSSD][1096661312]clssscSelect: cookie accept request 0x26368a0 2012-07-15 04:17:46.070: [ CSSD][1096661312]clssscevtypSHRCON: getting client with cmproc 0x26368a0 2012-07-15 04:17:46.070: [ CSSD][1096661312]clssgmRegisterClient: proc(5/0x26368a0), client(50/0x26877b0) ??11gR2?CRS?????ASM,??ocr???ASM?,??ASM???????,???CRS?????????: [root@maclean1 ~]# crsctl check has CRS-4638: Oracle High Availability Services is online [root@maclean1 ~]# crsctl check crs CRS-4638: Oracle High Availability Services is online CRS-4535: Cannot communicate with Cluster Ready Services CRS-4530: Communications failure contacting Cluster Synchronization Services daemon CRS-4534: Cannot communicate with Event Manager 2. ?????ASM DISK PATH???????,?????????????CRS: ??????OHASD??: [root@maclean1 ~]# crsctl stop has -f CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'maclean1' CRS-2673: Attempting to stop 'ora.mdnsd' on 'maclean1' CRS-2673: Attempting to stop 'ora.crf' on 'maclean1' CRS-2677: Stop of 'ora.mdnsd' on 'maclean1' succeeded CRS-2677: Stop of 'ora.crf' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gipcd' on 'maclean1' CRS-2677: Stop of 'ora.gipcd' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gpnpd' on 'maclean1' CRS-2677: Stop of 'ora.gpnpd' on 'maclean1' succeeded CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'maclean1' has completed CRS-4133: Oracle High Availability Services has been stopped. 3. ?-excl -nocrs????CRS,?????ASM ???????CRS??: [root@maclean1 ~]# crsctl start crs -excl -nocrs  CRS-4123: Oracle High Availability Services has been started. CRS-2672: Attempting to start 'ora.mdnsd' on 'maclean1' CRS-2676: Start of 'ora.mdnsd' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.gpnpd' on 'maclean1' CRS-2676: Start of 'ora.gpnpd' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.cssdmonitor' on 'maclean1' CRS-2672: Attempting to start 'ora.gipcd' on 'maclean1' CRS-2676: Start of 'ora.cssdmonitor' on 'maclean1' succeeded CRS-2676: Start of 'ora.gipcd' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.cssd' on 'maclean1' CRS-2672: Attempting to start 'ora.diskmon' on 'maclean1' CRS-2676: Start of 'ora.diskmon' on 'maclean1' succeeded CRS-2676: Start of 'ora.cssd' on 'maclean1' succeeded CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'maclean1' CRS-2672: Attempting to start 'ora.ctssd' on 'maclean1' CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'maclean1' CRS-2676: Start of 'ora.ctssd' on 'maclean1' succeeded CRS-2676: Start of 'ora.cluster_interconnect.haip' on 'maclean1' succeeded CRS-2672: Attempting to start 'ora.asm' on 'maclean1' CRS-2676: Start of 'ora.asm' on 'maclean1' succeeded #??????CRS_HOME???ORACLE_BASE?777??,??????? [root@maclean1 ~]# chmod 777 /g01 4.??ASM???disk_strings????ASM DISK PATH??: [root@maclean1 ~]# su - grid [grid@maclean1 ~]$ sqlplus / as sysasm SQL*Plus: Release 11.2.0.3.0 Production on Sun Jul 15 04:40:40 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options SQL> alter system set asm_diskstring='/dev/rasm*'; System altered. SQL> alter diskgroup systemdg mount; Diskgroup altered. SQL> create spfile from memory; File created. SQL> startup force mount; ORA-32004: obsolete or deprecated parameter(s) specified for ASM instance ASM instance started Total System Global Area 283930624 bytes Fixed Size 2227664 bytes Variable Size 256537136 bytes ASM Cache 25165824 bytes ASM diskgroups mounted SQL> show parameter spfile NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ spfile string /g01/grid/app/11.2.0/grid/dbs/ spfile+ASM1.ora SQL> show parameter disk NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ asm_diskgroups string SYSTEMDG asm_diskstring string /dev/rasm* SQL> create pfile from spfile; File created. SQL> create spfile='+SYSTEMDG' from pfile; File created. SQL> startup force; ORA-32004: obsolete or deprecated parameter(s) specified for ASM instance ASM instance started Total System Global Area 283930624 bytes Fixed Size 2227664 bytes Variable Size 256537136 bytes ASM Cache 25165824 bytes ASM diskgroups mounted SQL> show parameter spfile NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ spfile string +SYSTEMDG/maclean-cluster/asmp arameterfile/registry.253.7886 82933 ???????asm_diskstring ,????ASM DISKGROUP??SPFILE , ??ASM?????SPFILE?????????????????? 5. crsctl replace votedisk ???votedisk????: [root@maclean1 ~]# crsctl replace votedisk +systemdg Successful addition of voting disk 864a00efcfbe4f42bfd0f4f6b60472a0. Successful addition of voting disk ab14d6e727614f29bf53b9870052a5c8. Successful addition of voting disk 754c03c168854f46bf2daee7287bf260. Successful addition of voting disk 9ed58f37f3e84f28bfcd9b101f2af9f3. Successful addition of voting disk 4ce7b7c682364f12bf4df5ce1fb7814e. Successfully replaced voting disk group with +systemdg. CRS-4266: Voting file(s) successfully replaced [root@maclean1 ~]# crsctl query css votedisk ## STATE File Universal Id File Name Disk group -- ----- ----------------- --------- --------- 1. ONLINE 864a00efcfbe4f42bfd0f4f6b60472a0 (/dev/rasm-diskb) [SYSTEMDG] 2. ONLINE ab14d6e727614f29bf53b9870052a5c8 (/dev/rasm-diskc) [SYSTEMDG] 3. ONLINE 754c03c168854f46bf2daee7287bf260 (/dev/rasm-diskd) [SYSTEMDG] 4. ONLINE 9ed58f37f3e84f28bfcd9b101f2af9f3 (/dev/rasm-diske) [SYSTEMDG] 5. ONLINE 4ce7b7c682364f12bf4df5ce1fb7814e (/dev/rasm-diskf) [SYSTEMDG] Located 5 voting disk(s). [root@maclean1 ~]# ocrcheck Status of Oracle Cluster Registry is as follows : Version : 3 Total space (kbytes) : 262120 Used space (kbytes) : 2844 Available space (kbytes) : 259276 ID : 879001605 Device/File Name : +SYSTEMDG Device/File integrity check succeeded Device/File not configured Device/File not configured Device/File not configured Device/File not configured Cluster registry integrity check succeeded Logical corruption check succeeded ??replace?votedisk??? ASM DISK?,???votedisk?OCR??????? 6.??CRS??: [root@maclean1 ~]# crsctl stop crs CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'maclean1' CRS-2673: Attempting to stop 'ora.mdnsd' on 'maclean1' CRS-2673: Attempting to stop 'ora.ctssd' on 'maclean1' CRS-2673: Attempting to stop 'ora.asm' on 'maclean1' CRS-2677: Stop of 'ora.mdnsd' on 'maclean1' succeeded CRS-2677: Stop of 'ora.asm' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.cluster_interconnect.haip' on 'maclean1' CRS-2677: Stop of 'ora.ctssd' on 'maclean1' succeeded CRS-2677: Stop of 'ora.cluster_interconnect.haip' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.cssd' on 'maclean1' CRS-2677: Stop of 'ora.cssd' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gipcd' on 'maclean1' CRS-2677: Stop of 'ora.gipcd' on 'maclean1' succeeded CRS-2673: Attempting to stop 'ora.gpnpd' on 'maclean1' CRS-2677: Stop of 'ora.gpnpd' on 'maclean1' succeeded CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'maclean1' has completed CRS-4133: Oracle High Availability Services has been stopped. [root@maclean1 ~]# crsctl stat res -t -------------------------------------------------------------------------------- NAME TARGET STATE SERVER STATE_DETAILS -------------------------------------------------------------------------------- Local Resources -------------------------------------------------------------------------------- ora.BACKUPDG.dg ONLINE ONLINE maclean1 ora.DATA.dg ONLINE ONLINE maclean1 ora.LISTENER.lsnr ONLINE ONLINE maclean1 ora.SYSTEMDG.dg ONLINE ONLINE maclean1 ora.asm ONLINE ONLINE maclean1 Started ora.gsd OFFLINE OFFLINE maclean1 ora.net1.network ONLINE ONLINE maclean1 ora.ons ONLINE ONLINE maclean1 -------------------------------------------------------------------------------- Cluster Resources -------------------------------------------------------------------------------- ora.LISTENER_SCAN1.lsnr 1 ONLINE ONLINE maclean1 ora.cvu 1 ONLINE ONLINE maclean1 ora.maclean1.vip 1 ONLINE ONLINE maclean1 ora.maclean2.vip 1 ONLINE INTERMEDIATE maclean1 FAILED OVER ora.oc4j 1 ONLINE OFFLINE STARTING ora.prod.db 1 ONLINE OFFLINE Instance Shutdown,S TARTING 2 ONLINE OFFLINE ora.scan1.vip 1 ONLINE ONLINE maclean1 ???????ASM?????SPFILE,???????????????,?????CRS??????? ??11gR2 RAC+ASM?????????,????????????????ASM DISK PATH??????????

  Read the article

• INS-40719 error when Install Oracle RAC?

  - by Data-Base

  I'm tying to (learn how to) install Oracle RAC 11g on CentOS 6 all went OK so far but I get INS-40719 Error message regarding SCAN Name I do not have DNS server and I'm not going to try to use it on this setup I add this line to /etc/hosts 192.168.244.100 rac-cluster then used "rac-cluster" as the SCAN name and it's still not working with the same error message! any one can guide me on how to make it work? 1- do I have to add "192.168.244.100 rac-cluster" to /etc/hosts on both nodes? 2- do I need to edit/add any thing else on the nodes? cheers

  Read the article

• Oracle 11gR2 exp does not export some tables

  - by Tilo Prütz

  I have an Oracle 11g (11.2.0.1) Database running on Linux (x64). Within the database I have a schema and 33 tables for it. When I log in via sqlplus I can list all the tables via SELECT OBJECT_NAME FROM USER_OBJECTS WHERE OBJECT_TYPE = 'TABLE'; But when I export the Tablespace using exp ... BUFFER=65536 FULL=N COMPRESS=N CONSISTENT=Y TABLESPACES=... FILE=... Then it only exports 24 of the 33 tables. I have tried to export the missing tables via exp ... TABLES=<missing_table> ... But then I get an error: EXP-00011: NPSMIGRO2_CM.DEFAULT_USR_ATTR_VALUES does not exist How can I find out what's wrong here? How can I export all the tables?

  Read the article

• Cognos 8.3 and Oracle11g

  - by hiddenkirby

  When i place ojdbc5.jar in the c8\webapps\p2pd\WEB-INF\lib directory... i receive the error below. And yes the content store is on an oracle 11g RAC database. I am running Oracle11g Client. Cognos version is 8.3 SP4. [Content Manager database connection] 1. [ ERROR ] The database connection failed. 2. [ ERROR ] Content Manager failed to start because it could not load driver "oracle.jdbc.driver.OracleDriver". Any help would be greatly appreciated.

  Read the article

• Oracle Internet Directory - Required Schemas already loaded

  - by Brandon Kreisel

  After a successful installation of Oracle Internet Directories (OID) I attemped to remove and re-install it with a different configuration. First I ran ./runInstaller.sh -deinstall from the OID middleware directory to uninstall. Then i ran the installer again but it complained on the Specify Schema Database step. Upon connecting to the database, the installer threw: INST-5174: Required schemas are already loaded in the specified database. I connected to the target database and removed the OID schemas I knew of SQL> drop user ODS cascade; SQL> drop user ODSSM cascade; That didn't not work and the error still appears. What steps am I missing? Note: The Database is 11g and it was brand new before installing OID so there is no other data select * from all_users doesn't show any other schemas related to OID from what I can tell, the latest user creation date is OCT 2010

  Read the article

• How to set _optimizer_search_limit and _optimizer_max_permutations in Oracle10g.

  - by user52856

  I am working on a product that must support both MSSQL and Oracle (10g and 11g). I have some very complex queries that seem to run without issue on MSSQL 2005/2008, but very, very slow with Oracle. The CPU on the oracle server skyrockets for long periods of time, and it seems like the optimizer may be trying to find the best execution plan for the very complex query. I did some Googling to figure out how to limit the amount of time the optimizer spends on this, and came up with _optimizer_search_limit and _optimizer_max_permutations. Both of these parameters are hidden in Oracle 10g, and setting them in init.ora doesn't seem to make any difference. How do I set these parameters in Oracle. Or am I just totally barking up the wrong tree with the assumption that the optimizer is spending several minutes finding an execution plan? Thanks.

  Read the article

• Oracle LogMiner (Unsupported Operation)

  - by Sarith

  Hi all, I'm currently using Oracle 11g on RHEL5. I'm digging to see what are in the archived log files. After I query from v$logmnr_contents, I see many transactions of UNSUPPORTED operation. What do these unsupported transactions mean? I think that it's the cause that make my database generates lots of archived logs. Moreover, I'm using global temporary table for generating reports. I discover that when I insert and delete from those temporary table, it also records in the archived log file. How to do to reduce those recorded transactions? Regards, Sarith

  Read the article

• Cognos 8.3 and Oracle11g

  - by hiddenkirby

  When i place ojdbc5.jar in the c8\webapps\p2pd\WEB-INF\lib directory... i receive the error below. And yes the content store is on an oracle 11g RAC database. I am running Oracle11g Client. Cognos version is 8.3 SP4. [Content Manager database connection] 1. [ ERROR ] The database connection failed. 2. [ ERROR ] Content Manager failed to start because it could not load driver "oracle.jdbc.driver.OracleDriver". Any help would be greatly appreciated.

  Read the article

• Quickly revert an Oracle Database to a known state

  - by Anthony

  I would like to use Selenium to test a web application but in order to do that successfully the tests must be run against a database at a known state. The recording and running of the Selenium tests is not within the scope of this website so I'm only looking for recommendations on how best to revert the database after each test execution. Some details: current database size is 30GB however only about 4GB needs to be reverted database is Oracle 11g Standard Edition running on Windows Server 2003 the data in 6 different schemas needs to be reverted Ideally the process should be scripted so that it can be re-executed frequently and automatically via a scheduled task.

  Read the article

• Oracle Installation issue on Oracle Linux 6.4

  - by Pradhyoth

  I am trying to install Oracle 11g(11.2.0.1.0) on Oracle Linux 6.4(Remote Server). I get the following error(s) when Database Configuration Assistant is running ORA-01092: ORACLE instance terminated Disconnection forced ORA-48210: Relation Not Found Can someone help me regarding this errors, I cant seem to find what exactly that I have to do to solve this issue. I have done the same install on Oracle Linux 5.7 but never faced this issue before. The only problem while installing(which happens on 5.7 too) is that the required packages fail, but upon checking, it seems much higher versions are already installed. Also I cant do a yum update because the system seems to have connectivity issues with public-yum.oracle.com as I cant ping it(even though the IP Address gets resolved)

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >