Search Results

Search found 25182 results on 1008 pages for 'ask'.

Page 65/1008 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• Bluetooth not working on an Alienware m14x r2

  - by S. L.

  on my alienware m14x r2 laptop with ubuntu 12.04.1 x64, the bluetooth interface is not working. WLAN works fine. I have a dualboot install with ubuntu & win 7 on this laptop. In win 7, the bluetooth interface works fine, because its all activated in BIOS. I have the killer wireless-n 1202 a/g/n interface with integrated bluetooth 4.0 in this laptop. Here is some code : sudo rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 064e:8128 Suyin Corp. Bus 002 Device 003: ID 0cf3:3004 Atheros Communications, Inc. Bus 002 Device 004: ID 187c:0521 Alienware Corporation dmesg | grep "Bluetooth" [ 2.590377] Bluetooth: Core ver 2.16 [ 2.590395] Bluetooth: HCI device and connection manager initialized [ 2.590397] Bluetooth: HCI socket layer initialized [ 2.590399] Bluetooth: L2CAP socket layer initialized [ 2.590403] Bluetooth: SCO socket layer initialized [ 2.591518] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.591519] Bluetooth: BNEP filters: protocol multicast [ 2.599411] Bluetooth: RFCOMM TTY layer initialized [ 2.599415] Bluetooth: RFCOMM socket layer initialized [ 2.599416] Bluetooth: RFCOMM ver 1.11 [ 2.696552] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 2.696751] Bluetooth: Atheros AR30xx firmware driver ver 1.0 [ 2.702607] Bluetooth: Configuration file not found ar3k/ramps_0x11020000_40.dfu [ 2.702609] Bluetooth: Loading sysconfig file failed Any ideas to fix that problem ?

  Read the article

• How to install an alternative display manager?

  - by Mnementh

  I want to replace gdm with another display manager. I did 'aptitude install slim' (tried also xdm) and got a possibility to configure which display manager should be used. But after the reboot the display manager didn't got started. The Ubuntu-logo with the points simulating a progress goes on and on. If I press ESC, I can see, that slim (or xdm) was started, but I cannot see any login-screen. How can I use these alternative display managers? I use Ubuntu 10.10.

  Read the article

• How to get 32 bit version of libraries on Ubuntu 64 bit?

  - by Olivier Lalonde

  I'm trying to compile a program which uses Google's V8 library (which is 32 bit). Therefore any library I use within my program also has to be 32 bit. Where can I download the 32 bit version of libraries on Ubuntu 64 bit? More specifically, I'm looking for the libnotify 32 bit version. This is the errors I am getting right now: g++ -o shell -m32 shell.o -L../v8 -lv8 -lpthread `pkg-config --libs libnotify glib-2.0` /usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-linux-gnu/4.4.3/../../../libnotify.so when searching for -lnotify /usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-linux-gnu/4.4.3/../../../libnotify.a when searching for -lnotify /usr/bin/ld: skipping incompatible /usr/lib/libnotify.so when searching for -lnotify /usr/bin/ld: skipping incompatible /usr/lib/libnotify.a when searching for -lnotify /usr/bin/ld: cannot find -lnotify collect2: ld returned 1 exit status Thanks!

  Read the article

• How do install graphics drivers for radeon HD 6380g on a HP pavilion g6?

  - by Ryan

  I installed ubuntu from wubi using a live cd but when i booted i just got a black screen so i followed the instructions from this forum http://ubuntuforums.org/showpost.php?p=10089820&postcount=8 which successfully completed the ubuntu installation but now when i boot ubuntu i just get a command prompt. when i type in startx it comes up with an error. I am told i need to install graphics drivers, how do i do this? Thanks in advance Ryan

  Read the article

• How can I create a 4TB partition on my software RAID5 device?

  - by Kris Harper

  I have set up a RAID5 device with three 2TB hard drives using mdadm. The device was successfully created, but I cannot seem to create a partition on the device. When I try to make an ext3 or ext4 partition via Disk Utility, I get the following error Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/md0, start=0, size=4000526106624, type= Entering MS-DOS parser (offset=0, size=4000526106624) MSDOS_MAGIC found found partition type 0xee => protective MBR for GPT Exiting MS-DOS parser Entering EFI GPT parser GPT magic found partition_entry_lba=2 num_entries=128 size_of_entry=128 Leaving EFI GPT parser EFI GPT partition table detected containing partition table scheme = 3 got it got disk new partition guid '' is not valid type '' for GPT appear to be malformed I have seen this question, but that seems to suggest using gparted to do the partitioning. I'm fine with doing that, but my RAID device doesn't show up in the list of gparted devices. I suspect because this is a RAID and not a regular disk. I have already created a GPT partition table on the device. How can I add a partition to my device?

  Read the article

• LightDM will not start after stopping it

  - by Sweeters

  I am running Ubuntu 11.10 "Oneiric Ocelot", and in trying to install the nvidia CUDA developer drivers I switched to a virtual terminal (Ctrl-Alt-F5) and stopped lightdm (installation required that no X server instance be running) through sudo service lightdm stop. Re-starting lightdm with sudo service lightdm start did not work: A couple of * Starting [...] lines where displayed, but the process hanged. (I do not remember at which point, but I think it was * Starting System V runlevel compatibility. I manually rebooted my laptop, and ever since booting seems to hang, usually around the * Starting anac(h)ronistic cron [OK] log line (not consistently at that point, though). From that point on, I seem to be able to interact with my system only through a tty session (Ctrl-Alt-F1). I've tried purging and reinstalling both lightdm and gdm, as well as selecting both as the default display managers (through sudo dpkg-reconfigure [lightdm / gdm] or by manually editing /etc/X11/default-display-manager) through both apt-get and aptitude (that shouldn't make a difference anyway) after updating the packages, but the problem persists. Some of the responses I'm getting are the following: After running sudo dpkg-reconfigure lightdm (but not ... gdm) I get the following message: dpkg-maintscript-helper:warning: environment variable DPKG_MATINSCRIPT_NAME missing dpkg-maintscript-helper:warning: environment variable DPKG_MATINSCRIPT_PACKAGE missing After trying sudo service lightdm start or sudo start lightdm I get to see the boot loading screen again but nothing changes. If I go back to the tty shell I see lightdm start/running, process <num> but ps -e | grep lightdm gives no output. After trying sudo service gdm start or sudo starg gdm I get the gdm start/running, process <num> message, and gdm-binary is supposedly an active process, but all that happens is that the screen blinks a couple of times and nothing else. Other candidate solutions that I'd found on the web included running startx but when I try that I get an error output [...] Fatal server error: no screens found [...]. Moreover, I made sure that lightdm-gtk-greeter is installed but that did not help either. Please excuse my not including complete outputs/logs; I am writing this post from another computer and it's hard to manually copy the complete logs. Also, I've seen several posts that had to do with similar problems, but either there was no fix, or the one suggested did not work for me. In closing: Please help! I very much hope to avoid re-installing Ubuntu from scratch! :) Alex @mosi I did not manage to fix the NVIDIA kernel driver as per your instructions. I should perhaps mention that I'm on a Dell XPS15 laptop with an NVIDIA Optimus graphics card, and that I have bumblebee installed (which installs nvidia drivers during its installation, I believe). Issuing the mentioned commands I get the following: ~$uname -r 3.0.0-12-generic ~$lsmod | grep -i nvidia nvidia 11713772 0 ~$dmesg | grep -i nvidia [ 8.980041] nvidia: module license 'NVIDIA' taints kernel. [ 9.354860] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.354864] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.354868] nvidia 0000:01:00.0: enabling device (0006 -> 0007) [ 9.354873] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.354879] nvidia 0000:01:00.0: setting latency timer to 64 [ 9.355052] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011 Also, running aptitude search nvidia gives me the following: p nvidia-173 - NVIDIA binary Xorg driver, kernel module a p nvidia-173-dev - NVIDIA binary Xorg driver development file p nvidia-173-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-173-updates-dev - NVIDIA binary Xorg driver development file p nvidia-96 - NVIDIA binary Xorg driver, kernel module a p nvidia-96-dev - NVIDIA binary Xorg driver development file p nvidia-96-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-96-updates-dev - NVIDIA binary Xorg driver development file p nvidia-cg-toolkit - Cg Toolkit - GPU Shader Authoring Language p nvidia-common - Find obsolete NVIDIA drivers i nvidia-current - NVIDIA binary Xorg driver, kernel module a p nvidia-current-dev - NVIDIA binary Xorg driver development file c nvidia-current-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-current-updates-dev - NVIDIA binary Xorg driver development file i nvidia-settings - Tool of configuring the NVIDIA graphics dr p nvidia-settings-updates - Tool of configuring the NVIDIA graphics dr v nvidia-va-driver - v nvidia-va-driver - I've tried manually installing (sudo aptitude install <package>) packages nvidia-common and nvidia-settings-updates but to no avail. For example, sudo aptitude install nvidia-settings-updates returns the following log: Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 83 not upgraded. Need to get 0 B of archives. After unpacking 0 B will be used. Writing extended state information... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... The same happens with the Linux headers (i.e. I cannot seem to be able to install linux-headers-3.0.0-12-generic). The output of aptitude search linux-headers is as follows: v linux-headers - v linux-headers - v linux-headers-2.6 - i linux-headers-2.6.38-11 - Header files related to Linux kernel versi i linux-headers-2.6.38-11-generic - Linux kernel headers for version 2.6.38 on i A linux-headers-2.6.38-8 - Header files related to Linux kernel versi i A linux-headers-2.6.38-8-generic - Linux kernel headers for version 2.6.38 on v linux-headers-3 - v linux-headers-3.0 - v linux-headers-3.0 - i A linux-headers-3.0.0-12 - Header files related to Linux kernel versi p linux-headers-3.0.0-12-generic - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-generic- - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-server - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-virtual - Linux kernel headers for version 3.0.0 on p linux-headers-generic - Generic Linux kernel headers p linux-headers-generic-pae - Generic Linux kernel headers v linux-headers-lbm - v linux-headers-lbm - v linux-headers-lbm-2.6 - v linux-headers-lbm-2.6 - p linux-headers-lbm-3.0.0-12-gene - Header files related to linux-backports-mo p linux-headers-lbm-3.0.0-12-gene - Header files related to linux-backports-mo p linux-headers-lbm-3.0.0-12-serv - Header files related to linux-backports-mo p linux-headers-server - Linux kernel headers on Server Equipment. p linux-headers-virtual - Linux kernel headers for virtual machines @heartsmagic I did try purging and reinstalling any nvidia driver packages, but it did not seem to make a difference, My xorg.conf file contains the following: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 280.13 ([email protected]) Wed Jul 27 17:15:58 PDT 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Getting an error when using 'make' command (installing aircrack-ng on Ubuntu 12.04)

  - by Mohd Arafat Hossain

  I followed instructions from here http://securit.se/en/2012/03/kompilera-reaver-ubuntu-12-04/. I edited the 'common.mak' file successfully and when I type in make I get this error mohd-arafat-hossain@TUD:~/aircrack-ng-1.1$ make make -C src all make[1]: Entering directory `/home/mohd-arafat-hossain/aircrack-ng-1.1/src' make -C osdep make[2]: Entering directory `/home/mohd-arafat-hossain/aircrack-ng-1.1/src/osdep' Building for Linux make[3]: Entering directory `/home/mohd-arafat-hossain/aircrack-ng-1.1/src/osdep' make[3]: `.os.Linux' is up to date. make[3]: Leaving directory `/home/mohd-arafat-hossain/aircrack-ng-1.1/src/osdep' make[2]: Leaving directory `/home/mohd-arafat-hossain/aircrack-ng-1.1/src/osdep' gcc -g -W -Wall -O3 -D_FILE_OFFSET_BITS=64 -D_REVISION=0 -Iinclude -c -o aircrack-ng.o aircrack-ng.c In file included from aircrack-ng.c:65:0: crypto.h:12:26: fatal error: openssl/hmac.h: No such file or directory compilation terminated. make[1]: *** [aircrack-ng.o] Error 1 make[1]: Leaving directory `/home/mohd-arafat-hossain/aircrack-ng-1.1/src' make: *** [all] Error 2 What am I supposed to do now?

  Read the article

• Display date/time in Ubuntu lock screen (cinnamon-like)

  - by 3l4ng

  I was using Ubuntu 13.04 till a few days ago. I had installed Nemo and I guess cinnamon got installed too (I was still using Unity nonetheless). One of the good things about that was the lock screen somehow changed to mimick cinnamon's (with the background as a darkened version of desktop background and date/time displayed), something like this: I have no idea how this happened, but it looked great. It does not seem to work on Ubuntu 13.10. Anyone has any ideas to get a similar lock screen? I just need to display the date/time on one side with the bg as a darkened version of my desktop wallpaper

  Read the article

• How to boot with Intel GMA500 Poulsbo graphics

  - by Seyed Mohammad

  I have a Sony VAIO netbook with Intel GMA-500 Poulsbo Graphics and I'm trying to boot the latest Ubuntu-12.04 Beta-2 using a bootable USB. According to this Ubuntu-Wiki, support for Intel GMA-500 Poulsbo graphics is promising in Precise-Beta2 and should work out of the box. Of course the wiki talks about a problem when booting from USB and states that restarting X using: sudo service lightdm restart will bring a functional graphical desktop, but nothing happens for me! Any help is highly appreciated.

  Read the article

• Get more information about the crash

  - by Tito

  when i issue the command last in my terminal i see the following entries i.e. "crash" How can i find out more information about the crash: Is there any system dump file generated or a backtrace file that i can see or analyze. reboot system boot 3.2.0-32-generic Mon Nov 12 23:58 - 09:13 (09:14) tito pts/1 192.168.26.5 Mon Nov 12 23:56 - crash (00:01) tito pts/4 192.168.26.5 Mon Nov 12 22:46 - crash (01:12)

  Read the article

• xubuntu 12.04 totally refuses to boot after install with wubi on old computer. any tips or suggestions on things i can do to fix this problem?

  - by WizardinBlack

  so, i downloaded xubuntu 12.04 32-bit (not alt version) from the xubuntu.org website and placed the .zip into a folder named XUBUNTU on my desktop. i then extracted the files to that folder and ran wubi. i selected xubuntu from the drop down and clicked install. i let it do its thing and then chose the option to reboot when prompted. this is when i went to my girlfriends house for the day and left my laptop (dell latitude 120L) to finish the install. i came back home (about 8 hours later) to find my computer on the windows 7 log in screen when i rebooted my computer once more. i booted xubuntu just fine and things seemed to work perfectly. i turned off the pc and went to bed. next morning i booted xubuntu again without problems. i rebooted and went to windows, then next time i tried booting xubuntu in the middle of the splash screen it went black and the cpu light stopped blinking. i force shut down the computer and tried booting again when the same thing happened (instead of going black the splash just froze). i went back to windows and uninstalled and reintalled the os and havent beej able to boot it since. i even tried booting lubuntu with the same problem. please help!

  Read the article

• Al abrir archivo desde navegador se abre el directorio

  - by user67662

  al descargar un archivo a través de cualquier navegador (chrome, firefox, etc) e intentar abrirlo directamente, en vez de abrirse el archivo se abre el directorio en que se descargó. lo mismo me sucedió al intentar abrir un archivo desde el dash de gnome-shell. Esto sólo me sucede con los accesos directos a los archivos, cuando estoy dentro de nautilus se abre el archivo sin problemas. he intentado en distintos entornos de escritorio, el que uso más constantemente es Gnome-Shell, bajo Ubuntu 12.04 ¿cómo lo puedo solucionar? Gracias!

  Read the article

• flickr, other account types not appearing in online-accounts

  - by Fen

  Using Shotwell, I discovered that to publish to Flickr I need to set up an online account. But the online-accounts system settings only has support for Google, Facebook, Windows Live, Microsoft Exchange and Enterprise Login (Kerberos). How do I add account types? These appear to be properly installed (dpkg-reconfigure returns silently): gnome-control-center-signon is already the newest version. account-plugin-yahoo is already the newest version. account-plugin-flickr is already the newest version. Here's the config file (I think): > cat /usr/share/applications/gnome-online-accounts-panel.desktop [Desktop Entry] Name=Online Accounts Comment=Manage online accounts Exec=gnome-control-center online-accounts Icon=goa-panel Terminal=false Type=Application StartupNotify=true Categories=GNOME;GTK;Settings;DesktopSettings;X-GNOME-Settings-Panel;X-GNOME-PersonalSettings; OnlyShowIn=GNOME;XFCE X-GNOME-Bugzilla-Bugzilla=GNOME X-GNOME-Bugzilla-Product=gnome-control-center X-GNOME-Bugzilla-Component=Online Accounts X-GNOME-Bugzilla-Version=3.4.2 X-GNOME-Settings-Panel=online-accounts # Translators: those are keywords for the online-accounts control-center panel Keywords=Google;Facebook;Flickr;Twitter;Yahoo;Web;Online;Chat;Calendar;Mail;Contact; X-Ubuntu-Gettext-Domain=gnome-control-center-2.0 History: Started out with Ubuntu (64-bit), then in 12.04 installed xubuntu-desktop and have been using that. Upgraded to 12.10.

  Read the article

• No more internet connection after update in 14.04 with Intel Dual Band Wireless AC 7260

  - by luis

  My Dell XPS 15 (haswell) was working fine until I stupidly accepted recently to apply Ubuntu updates. Since then, my wifi does not work (it shows "device not managed" when clicking wifi icon in toolbar). Even USB to Ethernet adapter does not seem to work. Bluetooth at least "sees" other bluetooth devices around... See below output from dmesg (dmesg |grep iwl) : [ 886.462459] iwlwifi 0000:06:00.0: irq 51 for MSI/MSI-X [ 886.462561] iwlwifi 0000:06:00.0: Direct firmware load failed with error -2 [ 886.462562] iwlwifi 0000:06:00.0: Falling back to user helper [ 886.463284] iwlwifi 0000:06:00.0: loaded firmware version 22.1.7.0 op_mode iwlmvm [ 886.475345] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 886.475433] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 886.475684] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 886.689214] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' Below the output from modinfo iwlwifi: filename: /lib/modules/3.13.0-29- generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko license: GPL author: Copyright(c) 2003-2013 Intel Corporation <[email protected]> version: in-tree: description: Intel(R) Wireless WiFi driver for Linux firmware: iwlwifi-100-5.ucode firmware: iwlwifi-1000-5.ucode firmware: iwlwifi-135-6.ucode firmware: iwlwifi-105-6.ucode firmware: iwlwifi-2030-6.ucode firmware: iwlwifi-2000-6.ucode firmware: iwlwifi-5150-2.ucode firmware: iwlwifi-5000-5.ucode firmware: iwlwifi-6000g2b-6.ucode firmware: iwlwifi-6000g2a-5.ucode firmware: iwlwifi-6050-5.ucode firmware: iwlwifi-6000-4.ucode firmware: iwlwifi-3160-7.ucode firmware: iwlwifi-7260-7.ucode srcversion: 1E6912E109D5A43B310FB34 alias: pci:v00008086d0000095Asv*sd00005490bc*sc*i* (a pack of lines of kind "alias: pci:xxxxx...." that I guess are not helpful) alias: pci:v00008086d0000095Bsv*sd00005290bc*sc*i* depends: cfg80211 intree: Y vermagic: 3.13.0-29-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: 66:02:CB:36:F1:31:3B:EA:01:C4:BD:A9:65:67:CF:A7:23:C9:70:D8 sig_hashalgo: sha512 parm: swcrypto:using crypto in software (default 0 [hardware]) (int) parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint) parm: amsdu_size_8K:enable 8K amsdu size (default 0) (int) parm: fw_restart:restart firmware in case of error (default true) (bool) parm: antenna_coupling:specify antenna coupling in dB (defualt: 0 dB) (int) parm: wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable, 2=enable (default: 0) (int) parm: nvm_file:NVM file name (charp) parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool) parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int) parm: power_save:enable WiFi power management (default: disable) (bool) parm: power_level:default power save level (range from 1 - 5, default: 1) (int) I downloaded the latest versions of iwlwifi firmware from git (git clone git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git; copy iwlwifi-3160-9.ucode iwlwifi-7260-9.ucode iwlwifi-7265-9.ucode to /lib/firmware and reboot) but as you can imagine it did not help. Update #1: Downloaded from http://wireless.kernel.org/en/users/Drivers/iwlwifi?action=AttachFile&do=get&target=iwlwifi-7260-ucode-22.15.8.0.tgz and copied the file into /lib/firmware. After reloading it with modprobe, it seems to be OK: [ 14.761283] iwlwifi 0000:06:00.0: enabling device (0000 -> 0002) [ 14.761472] iwlwifi 0000:06:00.0: irq 51 for MSI/MSI-X [ 14.772478] iwlwifi 0000:06:00.0: loaded firmware version 22.15.8.0 op_mode iwlmvm [ 14.800274] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 14.800349] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 14.800657] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 15.007048] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' However, clicking in wifi in the toolbar still shows "device not managed". Any clues? Many thanks! Luis

  Read the article

• How to Disable Touchpad tap in Toshiba Tecra R850 in Oneiric

  - by Kibi

  I know there's a lot of similar questions, but nothing I have tried here works yet - perhaps I was doing it wrong. New Laptop - Toshiba Tecra R850 with an install of Oneiric. Mostly things are working well, but I have a problem with the touchpad (or whatever it's called) - whenever I use it for moving the mouse pointer I accidentally tap on it - basically I am clicking all over the place by accident. So I want to disable the tap-as-click (after all, I have buttons for clicks too). I open up "Mouse and Touchpad" and on the Touchpad tab I check "Disable touchpad when typing" and UNcheck "Enable mouse clicks with touchpad". This does not achieve anything. The only piece of code I had which worked at all was to completely disable the touchpad by removing the driver - but that is no use since I WANT the mousing ability, just not the tap. In fact, even that would be good if I could still use the little blue stick thing and the other buttons - but it disabled them too. Tried installing touchpad indicator but it didn't seem to want to install. There were suggestions to put stuff into /usr/share/X11/xorg.conf.d so I edited 50-synaptics.conf and added the line Option "TapButton1" "0" But it didn't work and I'm not surprised since the place, syntax and values were all a guess really... Any ideas? This is really annoying. Thanks Kibi

  Read the article

• libreoffice-base not configured yet

  - by Wicky

  I have the LibreOffice ppa installed (ppa:libreoffice/ppa) and today I had a problem after updating. I got the following error. Reading package lists ... Done Building dependency tree Reading state information ... Ready You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: libreoffice-base: Depends: libreoffice-base-core (= 1: 4.3.0-0ubuntu1 ~ precise1) but 4.3.0-3ubuntu1 ~ precise1 is installed Depends: libreoffice-base-drivers (= 1: 4.3.0-0ubuntu1 ~ precise1) but 4.3.0-3ubuntu1 ~ precise1 is installed Depends: libreoffice-core (= 1: 4.3.0-0ubuntu1 ~ precise1) but 4.3.0-3ubuntu1 ~ precise1 is installed libreoffice-core: Breaks: libreoffice-base (<1: ~ 4.3.0-3ubuntu1 precise1) but 4.3.0-0ubuntu1 ~ precise1 is installed E: Unmet dependencies. Try to use -f. After trying sudo apt-get install -f I got the following output Pakketlijsten worden ingelezen... Klaar Boom van vereisten wordt opgebouwd De status informatie wordt gelezen... Klaar Vereisten worden gecorrigeerd... Klaar De volgende extra pakketten zullen geïnstalleerd worden: libreoffice-base Voorgestelde pakketten: libreoffice-gcj libreoffice-report-builder unixodbc De volgende pakketten zullen opgewaardeerd worden: libreoffice-base 1 pakketten opgewaardeerd, 0 pakketten nieuw geïnstalleerd, 0 te verwijderen en 0 niet opgewaardeerd. 3 pakketten niet volledig geïnstalleerd of verwijderd. Er moeten 0 B/2170 kB aan archieven opgehaald worden. Door deze operatie zal er 2841 kB extra schijfruimte gebruikt worden. Wilt u doorgaan [J/n]? dpkg: vereistenproblemen verhinderen de configuratie van libreoffice-base: libreoffice-base is afhankelijk van libreoffice-base-core (= 1:4.3.0-0ubuntu1~precise1); maar: Versie van libreoffice-base-core op dit systeem is 1:4.3.0-3ubuntu1~precise1. libreoffice-base is afhankelijk van libreoffice-base-drivers (= 1:4.3.0-0ubuntu1~precise1); maar: Versie van libreoffice-base-drivers op dit systeem is 1:4.3.0-3ubuntu1~precise1. libreoffice-base is afhankelijk van libreoffice-core (= 1:4.3.0-0ubuntu1~precise1); maar: Versie van libreoffice-core op dit systeem is 1:4.3.0-3ubuntu1~precise1. libreoffice-core (1:4.3.0-3ubuntu1~precise1) breaks libreoffice-base (<< 1:4.3.0-3ubuntu1~precise1) and is geïnstalleerd. Version of libreoffice-base to be configured is 1:4.3.0-0ubuntu1~precise1. dpkg: fout bij afhandelen van libreoffice-base (--configure): vereistenproblemen - blijft ongeconfigureerd dpkg: vereistenproblemen verhinderen de configuratie van libreoffice-report-builder-bin: libreoffice-report-builder-bin is afhankelijk van libreoffice-base; maar:Er is geen apport-verslag weggeschreven omdat de foutmelding volgt op een eerdere mislukking. Pakket libreoffice-base is nog niet geconfigureerd. dpkg: fout bij afhandelen van libreoffice-report-builder-bin (--configure): vereistenproblemen - blijft ongeconfigureerd dpkg: vereistenproblemen verhinderen de configuratie van libreoffice: libreoffice is afhankelijk van libreoffice-base; maar: Pakket libreoffice-base is nog niet geconfigureerd. libreoffice is afhankelijk van libreoffice-report-builder-bin; maar: Pakket libreoffice-report-builder-bin is nog niet geconfigureerd. dpkg: fout bij afhandelen van libreoffice (--configure): vereistenproblemen - blijft ongeconfigureerd Er is geen apport-verslag weggeschreven omdat de foutmelding volgt op een eerdere mislukking. Er is geen apport-verslag weggeschreven omdat de foutmelding volgt op een eerdere mislukking. Fouten gevonden tijdens behandelen van: libreoffice-base libreoffice-report-builder-bin libreoffice E: Sub-process /usr/bin/dpkg returned an error code (1) How can I solve this problem so the dependencies are solved? Do I have to configure libreoffice-base manually?

  Read the article

• No Wi-Fi after system reboot

  - by ILya

  Something strange is happening... I've installed a Wi-Fi card into my Ubuntu Server 11.04 machine. To configure it I do the following: sudo vi /etc/network/interfaces add: iface wlan0 inet dhcp wpa-driver wext wpa-ssid "Sweet Home" wpa-ap-scan 1 wpa-proto WPA wpa-pairwise TKIP wpa-group TKIP wpa-key-mgmt WPA-PSK wpa-psk <A KEY> auto wlan0 then: $ sudo /etc/init.d/networking restart * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... ssh stop/waiting ssh start/running, process 1522 ssh stop/waiting ssh start/running, process 1590 And my machine successfully gets an ip to my wireless adapter. But after reboot it doesn't get any ip in wireless network. To fix it I run /etc/init.d/networking restart again and all is fine again - it gets an ip. I understand that I simply should add it to my startup scripts to make it work properly, but maybe there is a better way to configure it?

  Read the article

• How do I configure postfix starttls

  - by Michael Temeschinko

  I need to install postfix on my webserver couse I need to use sendmail for my website. I only need to send mail not recieve or relay. send with starttls (port 587) via relay smtp.strato.de here is what happens Jul 15 00:02:38 negrita postfix/smtp[7120]: Host offered STARTTLS: [smtp.strato.de] Jul 15 00:02:38 negrita postfix/smtp[7120]: C717A181252: to=<[email protected]>, relay=smtp.strato.de[81.169.145.133]:587, delay=0.31, delays=0.09/0/0.16/0.04, dsn=5.7.0, status=bounced (host smtp.strato.de[81.169.145.133] said: 530 5.7.0 Bitte konfigurieren Sie ihr E-Mailprogramm fuer Authentifizierung am SMTP Server, wie auf www.strato.de/email-hilfe beschrieben. - Please configure your mail client for using SMTP Server Authentication (in reply to MAIL FROM command)) Jul 15 00:02:38 negrita postfix/cleanup[7118]: 29F5F181254: message-id=<20120714220238.29F5F181254@negrita> Jul 15 00:02:38 negrita postfix/qmgr[7102]: 29F5F181254: from=<>, size=2548, nrcpt=1 (queue active) Jul 15 00:02:38 negrita postfix/bounce[7121]: C717A181252: sender non-delivery notification: 29F5F181254 Jul 15 00:02:38 negrita postfix/qmgr[7102]: C717A181252: removed Jul 15 00:02:39 negrita postfix/local[7122]: 29F5F181254: to=<michael@negrita>, relay=local, delay=1.1, delays=0.04/0/0/1.1, dsn=2.0.0, status=sent (delivered to command: procmail -a "$EXTENSION") Jul 15 00:02:39 negrita postfix/qmgr[7102]: 29F5F181254: removed Jul 15 08:05:18 negrita postfix/master[1083]: daemon started -- version 2.9.1, configuration /etc/postfix Jul 15 08:05:29 negrita postfix/master[1083]: reload -- version 2.9.1, configuration /etc/postfix and my config michael@negrita:~$ postconf -n biff = no config_directory = /etc/postfix delay_warning_time = 4h home_mailbox = /home/michael/Maildir/ html_directory = /usr/share/doc/postfix/html inet_interfaces = localhost mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 mydomain = example.com myhostname = negrita mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 notify_classes = resource, software, protocol readme_directory = /usr/share/doc/postfix recipient_delimiter = + relayhost = [smtp.strato.de]:587 smtp_sasl_password_maps = hash:/etc/postfix/sasl/passwd smtp_tls_enforce_peername = no smtp_tls_note_starttls_offer = yes smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes soft_bounce = yes the user and password is ok couse I can send mail with my thunderbird thanks in advance mike

  Read the article

• Cannot access localhost without internet connection

  - by Pavel K.

  for some reason i cannot access localhost without internet connection in ubuntu, as soon as i disconnect from internet (with gui networkmanager), both "ping localhost" and "ping 127.0.0.1" return: ping: sendmsg: Operation not permitted i switched off iptables, "iptables -L" gives: Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination what could be the problem?

  Read the article

• VMware Player 4.04 on Ubuntu 12.04 will not compile

  - by stephen mew

  I installed VMware-Player-4.0.4-744019.i386.bundle onto Ubuntu 11.10. This worked fine. I then upgraded to Ubuntu 12.04 The upgrade appeared to be successful. I then tried to start VMware Player and I got a popup "VMware Kernel Module Updater" I accept the process (click Install) The updater process runs, the output of which is; Stopping VMWare Services [green tick] Virtual Machine Monitor [RED exclamation mark] Virtual Network Device [green tick] VMware Blocking Filesystem [green tick] Virtual Machine Communication Interface [green tick] VMCI Sockets Error popup; Unable to start services See log file /tmp/vmware-root/modconfig-11912.log" Looking in the log file It seems that these are the complaints. 2012-07-11T15:35:19.829Z| vthread-3| I120: Failed to find /lib/modules/preferred/build/include/linux/version.h 2012-07-11T15:35:19.829Z| vthread-3| I120: Failed version test: /lib/modules/preferred/build/include/linux/version.h 2012-07-11T15:35:49.683Z| vthread-3| I120: Failed to compile module vmnet! I tried the patch for 4.0.3 and it did not work. Can anyone point me in the right direction here ? log file; 2012-07-11T15:35:18.618Z| vthread-3| I120: Log for VMware Workstation pid=11912 version=8.0.4 build=build-744019 option=Release 2012-07-11T15:35:18.618Z| vthread-3| I120: The process is 32-bit. 2012-07-11T15:35:18.618Z| vthread-3| I120: Host codepage=UTF-8 encoding=UTF-8 2012-07-11T15:35:18.618Z| vthread-3| I120: Host is Linux 3.2.0-26-generic Ubuntu 12.04 LTS 2012-07-11T15:35:18.616Z| vthread-3| I120: Msg_Reset: 2012-07-11T15:35:18.616Z| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": No such file or directory. 2012-07-11T15:35:18.616Z| vthread-3| I120: ---------------------------------------- 2012-07-11T15:35:18.616Z| vthread-3| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values. 2012-07-11T15:35:18.617Z| vthread-3| I120: Msg_Reset: 2012-07-11T15:35:18.617Z| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/config": No such file or directory. 2012-07-11T15:35:18.617Z| vthread-3| I120: ---------------------------------------- 2012-07-11T15:35:18.617Z| vthread-3| I120: PREF Optional preferences file not found at /root/.vmware/config. Using default values. 2012-07-11T15:35:18.617Z| vthread-3| I120: Msg_Reset: 2012-07-11T15:35:18.617Z| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/preferences": No such file or directory. 2012-07-11T15:35:18.617Z| vthread-3| I120: ---------------------------------------- 2012-07-11T15:35:18.617Z| vthread-3| I120: PREF Failed to load user preferences. 2012-07-11T15:35:18.618Z| vthread-3| W110: Logging to /tmp/vmware-root/modconfig-11912.log 2012-07-11T15:35:19.054Z| vthread-3| I120: modconf query interface initialized 2012-07-11T15:35:19.056Z| vthread-3| I120: modconf library initialized 2012-07-11T15:35:19.158Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:19.168Z| vthread-3| I120: Validating path /lib/modules/preferred/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:35:19.168Z| vthread-3| I120: Failed to find /lib/modules/preferred/build/include/linux/version.h 2012-07-11T15:35:19.168Z| vthread-3| I120: Failed version test: /lib/modules/preferred/build/include/linux/version.h not found. 2012-07-11T15:35:19.168Z| vthread-3| I120: Validating path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:35:19.175Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:19.201Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:19.291Z| vthread-3| I120: Header path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic is valid. 2012-07-11T15:35:19.292Z| vthread-3| I120: Validating path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:35:19.296Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:19.326Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:19.417Z| vthread-3| I120: Header path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic is valid. 2012-07-11T15:35:19.480Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.489Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.498Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.507Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.517Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.566Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.575Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.584Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.593Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.602Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.606Z| vthread-3| I120: Validating path /lib/modules/preferred/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:35:19.606Z| vthread-3| I120: Failed to find /lib/modules/preferred/build/include/linux/version.h 2012-07-11T15:35:19.606Z| vthread-3| I120: Failed version test: /lib/modules/preferred/build/include/linux/version.h not found. 2012-07-11T15:35:19.606Z| vthread-3| I120: Validating path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:35:19.611Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:19.635Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:19.741Z| vthread-3| I120: Header path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic is valid. 2012-07-11T15:35:19.787Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.796Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.805Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.814Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.824Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.829Z| vthread-3| I120: Validating path /lib/modules/preferred/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:35:19.829Z| vthread-3| I120: Failed to find /lib/modules/preferred/build/include/linux/version.h 2012-07-11T15:35:19.829Z| vthread-3| I120: Failed version test: /lib/modules/preferred/build/include/linux/version.h not found. 2012-07-11T15:35:19.829Z| vthread-3| I120: Validating path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:35:19.834Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:19.857Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:19.945Z| vthread-3| I120: Header path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic is valid. 2012-07-11T15:35:25.503Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:25.514Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:25.523Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:25.533Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:25.542Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:26.338Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:26.338Z| vthread-3| I120: Validating path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:35:26.343Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:26.368Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:26.455Z| vthread-3| I120: Header path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic is valid. 2012-07-11T15:35:26.455Z| vthread-3| I120: Building module vmmon. 2012-07-11T15:35:26.455Z| vthread-3| I120: Extracting the sources of the vmmon module. 2012-07-11T15:35:26.484Z| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmmon-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-26-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-07-11T15:35:35.469Z| vthread-3| I120: Installing module vmmon from /tmp/vmware-root/modules/vmmon.o to /lib/modules/3.2.0-26-generic/misc. 2012-07-11T15:35:35.470Z| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-26-generic/misc/vmmon.ko 2012-07-11T15:35:39.713Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:39.713Z| vthread-3| I120: Validating path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:35:39.719Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:39.753Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:39.845Z| vthread-3| I120: Header path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic is valid. 2012-07-11T15:35:39.845Z| vthread-3| I120: Building module vmnet. 2012-07-11T15:35:39.846Z| vthread-3| I120: Extracting the sources of the vmnet module. 2012-07-11T15:35:39.913Z| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmnet-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-26-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-07-11T15:35:49.683Z| vthread-3| I120: Failed to compile module vmnet! 2012-07-11T15:35:49.704Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:49.705Z| vthread-3| I120: Validating path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:35:49.729Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:49.874Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:49.961Z| vthread-3| I120: Header path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic is valid. 2012-07-11T15:35:49.961Z| vthread-3| I120: Building module vmblock. 2012-07-11T15:35:49.961Z| vthread-3| I120: Extracting the sources of the vmblock module. 2012-07-11T15:35:50.159Z| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmblock-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-26-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-07-11T15:35:59.283Z| vthread-3| I120: Installing module vmblock from /tmp/vmware-root/modules/vmblock.o to /lib/modules/3.2.0-26-generic/misc. 2012-07-11T15:35:59.284Z| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-26-generic/misc/vmblock.ko 2012-07-11T15:36:04.318Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:36:04.319Z| vthread-3| I120: Validating path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:36:04.324Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:36:04.344Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:36:04.427Z| vthread-3| I120: Header path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic is valid. 2012-07-11T15:36:04.427Z| vthread-3| I120: Building module vmci. 2012-07-11T15:36:04.428Z| vthread-3| I120: Extracting the sources of the vmci module. 2012-07-11T15:36:04.456Z| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmci-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-26-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-07-11T15:36:15.728Z| vthread-3| I120: Installing module vmci from /tmp/vmware-root/modules/vmci.o to /lib/modules/3.2.0-26-generic/misc. 2012-07-11T15:36:15.730Z| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-26-generic/misc/vmci.ko 2012-07-11T15:36:20.349Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:36:20.350Z| vthread-3| I120: Validating path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:36:20.355Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:36:20.378Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:36:20.464Z| vthread-3| I120: Header path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic is valid. 2012-07-11T15:36:20.464Z| vthread-3| I120: Building module vmci. 2012-07-11T15:36:20.464Z| vthread-3| I120: Extracting the sources of the vmci module. 2012-07-11T15:36:20.514Z| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmci-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-26-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-07-11T15:36:22.732Z| vthread-3| I120: Building module vsock. 2012-07-11T15:36:22.732Z| vthread-3| I120: Extracting the sources of the vsock module. 2012-07-11T15:36:22.783Z| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vsock-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-26-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-07-11T15:36:33.825Z| vthread-3| I120: Installing module vsock from /tmp/vmware-root/modules/vsock.o to /lib/modules/3.2.0-26-generic/misc. 2012-07-11T15:36:33.826Z| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-26-generic/misc/vsock.ko

  Read the article

• How to run 'apt-get install' to install all dependencies?

  - by michael

  I am running this in ubuntu server installation: sudo apt-get install git-core gnupg flex bison gperf build-essential \ zip curl libc6-dev libncurses5-dev:i386 x11proto-core-dev \ libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386 \ libgl1-mesa-dev g++-multilib mingw32 openjdk-6-jdk tofrodos \ python-markdown libxml2-utils xsltproc zlib1g-dev:i386 but I am getting this: Reading package lists... Building dependency tree... Reading state information... curl is already the newest version. gnupg is already the newest version. Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: build-essential : Depends: gcc (>= 4:4.4.3) but it is not going to be installed Depends: g++ (>= 4:4.4.3) but it is not going to be installed g++-multilib : Depends: cpp (>= 4:4.7.2-1ubuntu2) but it is not going to be installed Depends: gcc-multilib (>= 4:4.7.2-1ubuntu2) but it is not going to be installed Depends: g++ (>= 4:4.7.2-1ubuntu2) but it is not going to be installed Depends: g++-4.7-multilib (>= 4.7.2-1~) but it is not going to be installed How can I fix this?

  Read the article

• Issues installing synapse launcher

  - by George Morton

  I am trying to install synapse launcher on my desktop . I am using these two commands: sudo add-apt-repository ppa:synapse-core/ppa sudo apt-get update && sudo apt-get install synapse However I am getting an error with the second command saying E: Some index files failed to download, they have been ignored, or old ones used instead. I presume this has something to do with my connection to the hosting servers. But what I don't understand is the fact that synaptic is working it just seems to be something about that ppa. I don't know what I am doing wrong as the commands are widely suggested around the web, But they don't seem to work for me! I would greatly appreciate some advice on this as it is proving to be very frustrating. Many thanks, George

  Read the article

• Opening a file opens the folder the file is in, not the file itself

  - by Pepe Lebuntu

  Whenever I try to open a file (such as an .odt, or .doc) from say, the Dash or the Firefox Downloads, Ubuntu 11.10 opens Nautilus to the the folder where the file is, rather than just going to the application and loading the file straight away. In previous releases, when I clicked on a downloaded file, it just went straight to LibreOffice, and it was fine. This is adding a superfluous step in the process. How do I associate the correct extensions?

  Read the article

• Node remains in commissioning status

  - by Vinitha

  I have been trying to set up ubuntu cloud 12.04. I'm kind of new to MAAS and ubuntu. Here is what I followed. Have installed MAAS server using the steps provided in https://wiki.ubuntu.com/ServerTeam/MAAS For the node, I installed the Ubuntu 12.04 Server Image on a USB Stick. Then restarted the node and opted to enlist the node via boot media, with PXE. once the process was done, the node was powered off as expected. I manually powered on the node, as my node is not PXE enabled. Result - No node was visible on MAAS UI Since step 2 didn't work, I added the node via maas-cli. command. After the execution of this command I got the node reflected on to my MAAS UI. But the status continues to be in "Commissioning" for a long time. Then I executed "maas-cli maas nodes check-commissioning " and i got "Unrecognised signature: POST check_commissioning". I'm not sure where is the error. Could some one please help me solve this issue. I checked the following log file but found no error related to commissioning (pserv.log / maas.log / celery.log/celery-region.log). I found this entry in my auth.log "Nov 16 18:20:34 ubuntuCloud sshd[4222]: Did not receive identification string from xxx.xx.xx.x" not sure if it indicates anything as the ip that is mentioned is not of the node nor of the MAAS server. I also verified the time on the server and node using date cmd - (at one instance the times are : Server: Fri Nov 16 18:15:51 IST 2012 and Node Fri Nov 16 18:15:43 IST 2012). Not sure if 'date' the right cmd to set the time. I have also check maas_local_settings.py for the MAAS url. I'm not sure what are the logs that need to be verified. Is there any log that can be checked on the Node. Thanks Vinitha

  Read the article

• 'Photo editor' and 'RAW editor' in Shotwell

  - by Chris Wilson

  The preference menu in Shotwell allows the user to specify both an 'External photo editor' and an 'External RAW editor', but I'm confused as to why two external editors would be required. I'm not a photographer, so this confusion may simply be a result of my ignorance, but I thought RAW images were unprocessed photographs, in which case two editors would be kinda redundant. Am I simply missing one of the finer details of photograph processing?

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >