Search Results

Search found 4291 results on 172 pages for 'cluster analysis'.

Page 65/172 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• Webmatrix The Site has Stopped Fix

  - by Tarun Arora

  I just got started with AzureWebSites by creating a website by choosing the Wordpress template. Next I tried to install WebMatrix so that I could run the website locally. Every time I tried to run my website from WebMatrix I hit the message “The following site has stopped ‘xxx’” Step 00 – Analysis It took a bit of time to figure out that WebMatrix makes use of IISExpress. But it was easy to figure out that IISExpress was not showing up in the system tray when I started WebMatrix. This was a good indication that IISExpress is having some trouble starting up. So, I opened CMD prompt and tried to run IISExpress.exe this resulted in the below error message So, I ran IISExpress.exe /trace:Error this gave more detailed reason for failure Step 1 – Fixing “The following site has stopped ‘xxx’” Further analysis revealed that the IIS Express config file had been corrupted. So, I navigated to C:\Users\<UserName>\Documents\IISExpress\config and deleted the files applicationhost.config, aspnet.config and redirection.config (please take a backup of these files before deleting them). Come back to CMD and run IISExpress /trace:Error IIS Express successfully started and parked itself in the system tray icon. I opened up WebMatrix and clicked Run, this time the default site successfully loaded up in the browser without any failures. Step 2 – Download WordPress Azure WebSite using WebMatrix Because the config files ‘applicationhost.config’, ‘aspnet.config’ and ‘redirection.config’ were deleted I lost the settings of my Azure based WordPress site that I had downloaded to run from WebMatrix. This was simple to sort out… Open up WebMatrix and go to the Remote tab, click on Download Export the PublishSettings file from Azure Management Portal and upload it on the pop up you get when you had clicked Download in the previous step Now you should have your Azure WordPress website all set up & running from WebMatrix. Enjoy!

  Read the article

• github team workflow - to fork or not?

  - by aporat

  We're a small team of web developers currently using subversion but soon we're making a switch to github. I'm looking at different types of github workflows, and we're not sure if the whole forking concept in github for each developer is such a good idea for us. If we use forks, I understand each developer will have his own private remote & local repositories. I'm worried it will make pushing changesets hard and too complex. Also, my biggest concern is that it will force each developer to have 2 remotes: origin (which is the remote fork) and an upstream (which is used to "sync" changes from the main repository). Not sure if it's such a easy way to do things. This is similar to the workflow explained here: https://github.com/usm-data-analysis/usm-data-analysis.github.com/wiki/Git-workflow If we don't use forks, we can probably get by fine by using a central repo creating a branch for each task we're working on, and merge them into the development branch on the same repository. It means we won't be able to restrict merging of branches and might be a little messy to have many branches on the central repository. Any suggestions from teams who tried both workflow?

  Read the article

• MySQL documentation writer wanted

  - by stefanhinz

  As MySQL is thriving and growing, we're looking for an experienced technical writer located in Europe or North America to join the MySQL documentation team.For this job, we need the best and most dedicated people around. You will be part of a geographically distributed documentation team responsible for the technical documentation of all MySQL products. Team members are expected to work independently, requiring discipline and excellent time-management skills as well as the technical facilities to communicate across the Internet.Candidates should be prepared to work intensively with our engineers and support personnel. The overall team is highly distributed across different geographies and time zones. Our source format is DocBook XML. We're not just writing documentation, but also handling publication. This means you should be familiar with DocBook, and willing to learn our publication infrastructure.Candidates should therefore be interested not just in writing but also in the technical aspects of publishing documentation. Regarding your initial areas of authoring, those would be MySQL Cluster, MySQL Enterprise Monitor and Backup, and various parts of the MySQL server documentation (also known as the MySQL Reference Manual). This means you should be familiar with MySQL in general, and preferably also with MySQL Cluster and the MySQL Enterprise offerings.Other qualifications: Native English speaker 3 or more years previous experience in writing software documentation Excellent written and oral communication skills Ability to provide (online) samples of your work, e.g. books or articles Curiosity to learn new technologies Familiarity with distributed working environments and versioning systems such as SVN Comfortable with working on multiple operating systems, particularly Windows, Mac OS X, and Linux Ability to administer own workstations and test environment If you're interested, contact me under [email protected].

  Read the article

• Smart Phones Shockingly Energy Efficient; Lead to Decreased Household Power Consumption

  - by Jason Fitzpatrick

  Given how often our smart phones and tablets spend plugged in and topping off their battery reserves, it’s easy to assume they’re sucking down a lot of power. Analysis shows the lilliputian but powerful devices are surprisingly efficient and may be decreasing our overall power consumption. Courtesy of energy-centric blog Outlier, we’re treated to a look at the power sipping habits of popular smart phones and mobile devices. The simple take away? They use shockingly little electricity over the course of the year–you can charge your new iPhone for a year of regular usage for under a buck. The more complex analysis? The proliferation of tiny and energy efficient devices is displacing heavier energy consumers (large televisions, desktop computers, etc.) and driving a more efficient gadget-to-consumption ratio is many households. Hit up the link below to read the full post. How Much Does It Take to Charge an iPhone [via Mashable] 7 Ways To Free Up Hard Disk Space On Windows HTG Explains: How System Restore Works in Windows HTG Explains: How Antivirus Software Works

  Read the article

• A Dozen USB Chargers Analyzed; Or: Beware the Knockoffs

  - by Jason Fitzpatrick

  When it comes to buying a USB charger one is just as good as another so you might as well buy the cheapest one, right? This interesting and detailed analysis of name brand, off-brand, and counterfeit chargers will have you rethinking that stance. Ken Shirriff gathered up a dozen USB chargers including official Apple chargers, counterfeit Apple chargers, as well as offerings from Monoprice, Belkin, Motorola, and other companies. After putting them all through a battery of tests he gave them overall rankings based on nine different categories including power stability, power quality, and efficiency. The take away from his research? Quality varied widely between brands but when sticking with big companies like Apple or HP the chargers were all safe. The counterfeit chargers (like the $2 Apple iPad charger knock-off he tested) proved to be outright dangerous–several actually melted or caught fire in the course of the project. Hit up the link below for his detailed analysis including power output readings for the dozen chargers. A Dozen USB Chargers in the Lab [via O'Reilly Radar] 6 Start Menu Replacements for Windows 8 What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8

  Read the article

• Spend Analytics on a Grand Scale

  - by jacqueline.coolidge(at)oracle.com

  The Wall St. Journal reports in Billions in Bloat Uncovered in Beltway that a recent study by Government Accountability Office (GAO) has released a massive study of several programs and agencies that cost U.S. taxpayers billions of dollars each year.  This report help save $100 to $200 Billion dollars by identifying duplicate spending and ineffective programs that can be consolidated or eliminated. Now, that is spend analytics on a massive scale! It remains to be seen how actionable that information will be.  Certainly, there have been studies before that identify wasteful spending.  But, it’s a great case of the power of business intelligence and spend analytics.   Many companies do find significant savings when they implement spend and procurement analytics. What makes for an excellent spend analysis? It should be: Objective and provide visibility across programs and/or divisions A cross functional analysis that links financial with performance metrics Prescriptive and actionable Spend and procurement analytics have been HOT during the economic downturn! I expect 2011 will see many more companies get serious about spend analytics and would love to hear from companies who are willing to share their experience.

  Read the article

• How to get full query string parameters not UrlDecoded

  - by developerit

  Introduction While developing Developer IT’s website, we came across a problem when the user search keywords containing special character like the plus ‘+’ char. We found it while looking for C++ in our search engine. The request parameter output in ASP.NET was “c “. I found it strange that it removed the ‘++’ and replaced it with a space… Analysis After a bit of Googling and Reflection, it turns out that ASP.NET calls UrlDecode on each parameters retreived by the Request(“item”) method. The Request.Params property is affected by this two since it mashes all QueryString, Forms and other collections into a single one. Workaround Finally, I solve the puzzle usign the Request.RawUrl property and parsing it with the same RegEx I use in my url re-writter. The RawUrl not affected by anything. As its name say it, it’s raw. Published on http://www.developerit.com/

  Read the article

• Your thoughts on Best Practices for Scientific Computing?

  - by John Smith

  A recent paper by Wilson et al (2014) pointed out 24 Best Practices for scientific programming. It's worth to have a look. I would like to hear opinions about these points from experienced programmers in scientific data analysis. Do you think these advices are helpful and practical? Or are they good only in an ideal world? Wilson G, Aruliah DA, Brown CT, Chue Hong NP, Davis M, Guy RT, Haddock SHD, Huff KD, Mitchell IM, Plumbley MD, Waugh B, White EP, Wilson P (2014) Best Practices for Scientific Computing. PLoS Biol 12:e1001745. http://www.plosbiology.org/article/info%3Adoi%2F10.1371%2Fjournal.pbio.1001745 Box 1. Summary of Best Practices Write programs for people, not computers. (a) A program should not require its readers to hold more than a handful of facts in memory at once. (b) Make names consistent, distinctive, and meaningful. (c) Make code style and formatting consistent. Let the computer do the work. (a) Make the computer repeat tasks. (b) Save recent commands in a file for re-use. (c) Use a build tool to automate workflows. Make incremental changes. (a) Work in small steps with frequent feedback and course correction. (b) Use a version control system. (c) Put everything that has been created manually in version control. Don’t repeat yourself (or others). (a) Every piece of data must have a single authoritative representation in the system. (b) Modularize code rather than copying and pasting. (c) Re-use code instead of rewriting it. Plan for mistakes. (a) Add assertions to programs to check their operation. (b) Use an off-the-shelf unit testing library. (c) Turn bugs into test cases. (d) Use a symbolic debugger. Optimize software only after it works correctly. (a) Use a profiler to identify bottlenecks. (b) Write code in the highest-level language possible. Document design and purpose, not mechanics. (a) Document interfaces and reasons, not implementations. (b) Refactor code in preference to explaining how it works. (c) Embed the documentation for a piece of software in that software. Collaborate. (a) Use pre-merge code reviews. (b) Use pair programming when bringing someone new up to speed and when tackling particularly tricky problems. (c) Use an issue tracking tool. I'm relatively new to serious programming for scientific data analysis. When I tried to write code for pilot analyses of some of my data last year, I encountered tremendous amount of bugs both in my code and data. Bugs and errors had been around me all the time, but this time it was somewhat overwhelming. I managed to crunch the numbers at last, but I thought I couldn't put up with this mess any longer. Some actions must be taken. Without a sophisticated guide like the article above, I started to adopt "defensive style" of programming since then. A book titled "The Art of Readable Code" helped me a lot. I deployed meticulous input validations or assertions for every function, renamed a lot of variables and functions for better readability, and extracted many subroutines as reusable functions. Recently, I introduced Git and SourceTree for version control. At the moment, because my co-workers are much more reluctant about these issues, the collaboration practices (8a,b,c) have not been introduced. Actually, as the authors admitted, because all of these practices take some amount of time and effort to introduce, it may be generally hard to persuade your reluctant collaborators to comply them. I think I'm asking your opinions because I still suffer from many bugs despite all my effort on many of these practices. Bug fix may be, or should be, faster than before, but I couldn't really measure the improvement. Moreover, much of my time has been invested on defence, meaning that I haven't actually done much data analysis (offence) these days. Where is the point I should stop at in terms of productivity? I've already deployed: 1a,b,c, 2a, 3a,b,c, 4b,c, 5a,d, 6a,b, 7a,7b I'm about to have a go at: 5b,c Not yet: 2b,c, 4a, 7c, 8a,b,c (I could not really see the advantage of using GNU make (2c) for my purpose. Could anyone tell me how it helps my work with MATLAB?)

  Read the article

• Introducing Microsoft SQL Server 2008 R2 - Business Intelligence Samples

  - by smisner

  On April 14, 2010, Microsoft Press (blog | twitter) released my latest book, co-authored with Ross Mistry (twitter), as a free ebook download - Introducing Microsoft SQL Server 2008 R2. As the title implies, this ebook is an introduction to the latest SQL Server release. Although you'll find a comprehensive review of the product's features in this book, you will not find the step-by-step details that are typical in my other books. For those readers who are interested in a more interactive learning experience, I have created two samples file for download: IntroSQLServer2008R2Samples project Sales Analysis workbook Here's a recap of the business intelligence chapters and the samples I used to generate the screen shots by chapter: Chapter 6: Scalable Data Warehousing covers a new edition of SQL Server, Parallel Data Warehouse. Understandably, Microsoft did not ship me the software and hardware to set up my own Parallel Data Warehouse environment for testing purposes and consequently you won't see any screenshots in this chapter. I received a lot of information and a lot of help from the product team during the development of this chapter to ensure its technical accuracy. Chapter 7: Master Data Services is a new component in SQL Server. After you install Master Data Services (MDS), which is a separate installation from SQL Server although it's found on the same media, you can install sample models to explore (which is what I did to create screenshots for the book). To do this, you deploying packages found at \Program Files\Microsoft SQL Server\Master Data Services\Samples\Packages. You will first need to use the Configuration Manager (in the Microsoft SQL Server 2008 R2\Master Data Services program group) to create a database and a Web application for MDS. Then when you launch the application, you'll see a Getting Started page which has a Deploy Sample Data link that you can use to deploy any of the sample packages. Chapter 8: Complex Event Processing is an introduction to another new component, StreamInsight. This topic was way too large to cover in-depth in a single chapter, so I focused on information such as architecture, development models, and an overview of the key sections of code you'll need to develop for your own applications. StreamInsight is an engine that operates on data in-flight and as such has no user interface that I could include in the book as screenshots. The November CTP version of SQL Server 2008 R2 included code samples as part of the installation, but these are not the official samples that will eventually be available in Codeplex. At the time of this writing, the samples are not yet published. Chapter 9: Reporting Services Enhancements provides an overview of all the changes to Reporting Services in SQL Server 2008 R2, and there are many! In previous posts, I shared more details than you'll find in the book about new functions (Lookup, MultiLookup, and LookupSet), properties for page numbering, and the new global variable RenderFormat. I will confess that I didn't use actual data in the book for my discussion on the Lookup functions, but I did create real reports for the blog posts and will upload those separately. For the other screenshots and examples in the book, I have created the IntroSQLServer2008R2Samples project for you to download. To preview these reports in Business Intelligence Development Studio, you must have the AdventureWorksDW2008R2 database installed, and you must download and install SQL Server 2008 R2. For the map report, you must execute the PopulationData.sql script that I included in the samples file to add a table to the AdventureWorksDW2008R2 database. The IntroSQLServer2008R2Samples project includes the following files: 01_AggregateOfAggregates.rdl to illustrate the use of embedded aggregate functions 02_RenderFormatAndPaging.rdl to illustrate the use of page break properties (Disabled, ResetPageNumber), the PageName property, and the RenderFormat global variable 03_DataSynchronization.rdl to illustrate the use of the DomainScope property 04_TextboxOrientation.rdl to illustrate the use of the WritingMode property 05_DataBar.rdl 06_Sparklines.rdl 07_Indicators.rdl 08_Map.rdl to illustrate a simple analytical map that uses color to show population counts by state PopulationData.sql to provide the data necessary for the map report Chapter 10: Self-Service Analysis with PowerPivot introduces two new components to the Microsoft BI stack, PowerPivot for Excel and PowerPivot for SharePoint, which you can learn more about at the PowerPivot site. To produce the screenshots for this chapter, I created the Sales Analysis workbook which you can download (although you must have Excel 2010 and the PowerPivot for Excel add-in installed to explore it fully). It's a rather simple workbook because space in the book did not permit a complete exploration of all the wonderful things you can do with PowerPivot. I used a tutorial that was available with the CTP version as a basis for the report so it might look familiar if you've already started learning about PowerPivot. In future posts, I'll continue exploring the new features in greater detail. If there's any special requests, please let me know! Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• SQL SERVER – Example of Performance Tuning for Advanced Users with DB Optimizer

  - by Pinal Dave

  Performance tuning is such a subject that everyone wants to master it. In beginning everybody is at a novice level and spend lots of time learning how to master the art of performance tuning. However, as we progress further the tuning of the system keeps on getting very difficult. I have understood in my early career there should be no need of ego in the technology field. There are always better solutions and better ideas out there and we should not resist them. Instead of resisting the change and new wave I personally adopt it. Here is a similar example, as I personally progress to the master level of performance tuning, I face that it is getting harder to come up with optimal solutions. In such scenarios I rely on various tools to teach me how I can do things better. Once I learn about tools, I am often able to come up with better solutions when I face the similar situation next time. A few days ago I had received a query where the user wanted to tune it further to get the maximum out of the performance. I have re-written the similar query with the help of AdventureWorks sample database. SELECT * FROM HumanResources.Employee e INNER JOIN HumanResources.EmployeeDepartmentHistory edh ON e.BusinessEntityID = edh.BusinessEntityID INNER JOIN HumanResources.Shift s ON edh.ShiftID = s.ShiftID; User had similar query to above query was used in very critical report and wanted to get best out of the query. When I looked at the query – here were my initial thoughts Use only column in the select statements as much as you want in the application Let us look at the query pattern and data workload and find out the optimal index for it Before I give further solutions I was told by the user that they need all the columns from all the tables and creating index was not allowed in their system. He can only re-write queries or use hints to further tune this query. Now I was in the constraint box – I believe * was not a great idea but if they wanted all the columns, I believe we can’t do much besides using *. Additionally, if I cannot create a further index, I must come up with some creative way to write this query. I personally do not like to use hints in my application but there are cases when hints work out magically and gives optimal solutions. Finally, I decided to use Embarcadero’s DB Optimizer. It is a fantastic tool and very helpful when it is about performance tuning. I have previously explained how it works over here. First open DBOptimizer and open Tuning Job from File >> New >> Tuning Job. Once you open DBOptimizer Tuning Job follow the various steps indicates in the following diagram. Essentially we will take our original script and will paste that into Step 1: New SQL Text and right after that we will enable Step 2 for Generating Various cases, Step 3 for Detailed Analysis and Step 4 for Executing each generated case. Finally we will click on Analysis in Step 5 which will generate the report detailed analysis in the result pan. The detailed pan looks like. It generates various cases of T-SQL based on the original query. It applies various hints and available hints to the query and generate various execution plans of the query and displays them in the resultant. You can clearly notice that original query had a cost of 0.0841 and logical reads about 607 pages. Whereas various options which are just following it has different execution cost as well logical read. There are few cases where we have higher logical read and there are few cases where as we have very low logical read. If we pay attention the very next row to original query have Merge_Join_Query in description and have lowest execution cost value of 0.044 and have lowest Logical Reads of 29. This row contains the query which is the most optimal re-write of the original query. Let us double click over it. Here is the query: SELECT * FROM HumanResources.Employee e INNER JOIN HumanResources.EmployeeDepartmentHistory edh ON e.BusinessEntityID = edh.BusinessEntityID INNER JOIN HumanResources.Shift s ON edh.ShiftID = s.ShiftID OPTION (MERGE JOIN) If you notice above query have additional hint of Merge Join. With the help of this Merge Join query hint this query is now performing much better than before. The entire process takes less than 60 seconds. Please note that it the join hint Merge Join was optimal for this query but it is not necessary that the same hint will be helpful in all the queries. Additionally, if the workload or data pattern changes the query hint of merge join may be no more optimal join. In that case, we will have to redo the entire exercise once again. This is the reason I do not like to use hints in my queries and I discourage all of my users to use the same. However, if you look at this example, this is a great case where hints are optimizing the performance of the query. It is humanly not possible to test out various query hints and index options with the query to figure out which is the most optimal solution. Sometimes, we need to depend on the efficiency tools like DB Optimizer to guide us the way and select the best option from the suggestion provided. Let me know what you think of this article as well your experience with DB Optimizer. Please leave a comment. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Joins, SQL Optimization, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Oracle Enterprise Manager Ops Center 12c : Enterprise Controller High Availability (EC HA)

  - by Anand Akela

  Contributed by Mahesh sharma, Oracle Enterprise Manager Ops Center team In Oracle Enterprise Manager Ops Center 12c we introduced a new feature to make the Enterprise Controllers highly available. With EC HA if the hardware crashes, or if the Enterprise Controller services and/or the remote database stop responding, then the enterprise services are immediately restarted on the other standby Enterprise Controller without administrative intervention. In today's post, I'll briefly describe EC HA, look at some of the prerequisites and then show some screen shots of how the Enterprise Controller is represented in the BUI. In my next post, I'll show you how to install the EC in a HA environment and some of the new commands. What is EC HA? Enterprise Controller High Availability (EC HA) provides an active/standby fail-over solution for two or more Ops Center Enterprise Controllers, all within an Oracle Clusterware framework. This allows EC resources to relocate to a standby if the hardware crashes, or if certain services fail. It is also possible to manually relocate the services if maintenance on the active EC is required. When the EC services are relocated to the standby, EC services are interrupted only for the period it takes for the EC services to stop on the active node and to start back up on a standby node. What are the prerequisites? To install EC in a HA framework an understanding of the prerequisites are required. There are many possibilities on how these prerequisites can be installed and configured - we will not discuss these in this post. However, best practices should be applied when installing and configuring, I would suggest that you get expert help if you are not familiar with them. Lets briefly look at each of these prerequisites in turn: Hardware : Servers are required to host the active and standby node(s). As the nodes will be in a clustered environment, they need to be the same model and configured identically. The nodes should have the same processor class, number of cores, memory, network cards, for example. Operating System : We can use Solaris 10 9/10 or higher, Solaris 11, OEL 5.5 or higher on x86 or Sparc Network : There are a number of requirements for network cards in clusterware, and cables should be networked identically on all the nodes. We must also consider IP allocation for public / private and Virtual IP's (VIP's). Storage : Shared storage will be required for the cluster voting disks, Oracle Cluster Register (OCR) and the EC's libraries. Clusterware : Oracle Clusterware version 11.2.0.3 or later is required. This can be downloaded from: http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html Remote Database : Oracle RDBMS 11.1.0.x or later is required. This can be downloaded from: http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html For detailed information on how to install EC HA , please read : http://docs.oracle.com/cd/E27363_01/doc.121/e25140/install_config-shared.htm#OPCSO242 For detailed instructions on installing Oracle Clusterware, please read : http://docs.oracle.com/cd/E11882_01/install.112/e17214/chklist.htm#BHACBGII For detailed instructions on installing the remote Oracle database have a read of: http://www.oracle.com/technetwork/database/enterprise-edition/documentation/index.html The schematic diagram below gives a visual view of how the prerequisites are connected. When a fail-over occurs the Enterprise Controller resources and the VIP are relocated to one of the standby nodes. The standby node then becomes active and all Ops Center services are resumed. Connecting to the Enterprise Controller from your favourite browser. Let's presume we have installed and configured all the prerequisites, and installed Ops Center on the active and standby nodes. We can now connect to the active node from a browser i.e. http://<active_node1>/, this will redirect us to the virtual IP address (VIP). The VIP is the IP address that moves with the Enterprise Controller resource. Once you log on and view the assets, you will see some new symbols, these represent that the nodes are cluster members, with one being an active member and the other a standby member in this case. If you connect to the standby node, the browser will redirect you to a splash page, indicating that you have connected to the standby node. Hope you find this topic interesting. Next time I will post about how to install the Enterprise Controller in the HA frame work. Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

  Read the article

• Code Metrics: Number of IL Instructions

  - by DigiMortal

  In my previous posting about code metrics I introduced how to measure LoC (Lines of Code) in .NET applications. Now let’s take a step further and let’s take a look how to measure compiled code. This way we can somehow have a picture about what compiler produces. In this posting I will introduce you code metric called number of IL instructions. NB! Number of IL instructions is not something you can use to measure productivity of your team. If you want to get better idea about the context of this metric and LoC then please read my first posting about LoC. What are IL instructions? When code written in some .NET Framework language is compiled then compiler produces assemblies that contain byte code. These assemblies are executed later by Common Language Runtime (CLR) that is code execution engine of .NET Framework. The byte code is called Intermediate Language (IL) – this is more common language than C# and VB.NET by example. You can use ILDasm tool to convert assemblies to IL assembler so you can read them. As IL instructions are building blocks of all .NET Framework binary code these instructions are smaller and highly general – we don’t want very rich low level language because it executes slower than more general language. For every method or property call in some .NET Framework language corresponds set of IL instructions. There is no 1:1 relationship between line in high level language and line in IL assembler. There are more IL instructions than lines in C# code by example. How much instructions there are? I have no common answer because it really depends on your code. Here you can see some metrics from my current community project that is developed on SharePoint Server 2007. As average I have about 7 IL instructions per line of code. This is not metric you should use, it is just illustrative example so you can see the differences between numbers of lines and IL instructions. Why should I measure the number of IL instructions? Just take a look at chart above. Compiler does something that you cannot see – it compiles your code to IL. This is not intuitive process because you usually cannot say what is exactly the end result. You know it at greater plain but you don’t know it exactly. Therefore we can expect some surprises and that’s why we should measure the number of IL instructions. By example, you may find better solution for some method in your source code. It looks nice, it works nice and everything seems to be okay. But on server under load your fix may be way slower than previous code. Although you minimized the number of lines of code it ended up with increasing the number of IL instructions. How to measure the number of IL instructions? My choice is NDepend because Visual Studio is not able to measure this metric. Steps to make are easy. Open your NDepend project or create new and add all your application assemblies to project (you can also add Visual Studio solution to project). Run project analysis and wait until it is done. You can see over-all stats form global summary window. This is the same window I used to read the LoC and the number of IL instructions metrics for my chart. Meanwhile I made some changes to my code (enabled advanced caching for events and event registrations module) and then I ran code analysis again to get results for this section of this posting. NDepend is also able to tell you exactly what parts of code have problematically much IL instructions. The code quality section of CQL Query Explorer shows you how much problems there are with members in analyzed code. If you click on the line Methods too big (NbILInstructions) you can see all the problematic members of classes in CQL Explorer shown in image on right. In my case if have 10 methods that are too big and two of them have horrible number of IL instructions – just take a look at first two methods in this TOP10. Also note the query box. NDepend has easy and SQL-like query language to query code analysis results. You can modify these queries if you like and also you can define your own ones if default set is not enough for you. What is good result? As you can see from query window then the number of IL instructions per member should have maximally 200 IL instructions. Of course, like always, the less instructions you have, the better performing code you have. I don’t mean here little differences but big ones. By example, take a look at my first method in warnings list. The number of IL instructions it has is huge. And believe me – this method looks awful. Conclusion The number of IL instructions is useful metric when optimizing your code. For analyzing code at general level to find out too long methods you can use the number of LoC metric because it is more intuitive for you and you can therefore handle the situation more easily. Also you can use NDepend as code metrics tool because it has a lot of metrics to offer.

  Read the article

• ORA-7445 Troubleshooting

  - by [email protected]

      QUICKLINK: Note 153788.1 ORA-600/ORA-7445 Lookup tool Note 1082674.1 : A Video To Demonstrate The Usage Of The ORA-600/ORA-7445 Lookup Tool [Video]   Have you observed an ORA-07445 error reported in your alert log? While the ORA-600 error is "captured" as a handled exception in the Oracle source code, the ORA-7445 is an unhandled exception error due to an OS exception which should result in the creation of a core file.  An ORA-7445 is a generic error, and can occur from anywhere in the Oracle code. The precise location of the error is identified by the core file and/or trace file it produces.  Looking for the best way to diagnose? Whenever an ORA-7445 error is raised a core file is generated.  There may be a trace file generated with the error as well.   Prior to 11g, the core files are located in the CORE_DUMP_DEST directory.   Starting with 11g, there is a new advanced fault diagnosability infrastructure to manage trace data.  Diagnostic files are written into a root directory for all diagnostic data called the ADR home.   Core files at 11g will go to the ADR HOME/cdump directory.   For more information on the Oracle 11g Diagnosability feature see Note 453125.1 11g Diagnosability Frequently Asked Questions Note 443529.1 11g Quick Steps to Package and Send Critical Error Diagnostic Information to Support[Video]   NOTE:  While the core file is captured in the Diagnosability infrastructure, the file may not be included with a diagnostic package.1.  Check the Alert LogThe alert log may indicate additional errors or other internal errors at the time of the problem.   In some cases, the ORA-7445 error will occur along with ORA-600, ORA-3113, ORA-4030 errors.  The ORA-7445 error can be side effects of the other problems and you should review the first error and associated core file or trace file and work down the list of errors.   Note 1020463.6 DIAGNOSING ORA-3113 ERRORS Note 1812.1 TECH:  Getting a Stack Trace from a CORE file Note 414966.1 RDA Documentation Index   If the ORA-7445 errors are not associated with other error conditions, ensure the trace data is not truncated. If you see a message at the end of the file   "MAX DUMP FILE SIZE EXCEEDED"   the MAX_DUMP_FILE_SIZE parameter is not setup high enough or to 'unlimited'. There could be vital diagnostic information missing in the file and discovering the root issue may be very difficult.  Set the MAX_DUMP_FILE_SIZE appropriately and regenerate the error for complete trace information. For pointers on deeper analysis of these errors see   Note 390293.1 Introduction to 600/7445 Internal Error Analysis Note 211909.1 Customer Introduction to ORA-7445 Errors 2.  Search 600/7445 Lookup Tool Visit My Oracle Support to access the ORA-00600 Lookup tool (Note 153788.1). The ORA-600/ORA-7445 Lookup tool may lead you to applicable content in My Oracle Support on the problem and can be used to investigate the problem with argument data from the error message or you can pull out key stack pointers from the associated trace file to match up against known bugs.3.  "Fine tune" searches in Knowledge Base As the ORA-7445 error indicates an unhandled exception in the Oracle source code, your search in the Oracle Knowledge Base will need to focus on the stack data from the core file or the trace file. Keep in mind that searches on generic argument data will bring back a large result set.  The more you can learn about the environment and code leading to the errors, the easier it will be to narrow the hit list to match your problem. Note 153788.1 ORA-600/ORA-7445 TroubleshooterNote 1082674.1 A Video To Demonstrate The Usage Of The ORA-600/ORA-7445 Lookup Tool [Video] NOTE:  If no trace file is captured, see Note 1812.1 TECH:  Getting a Stack Trace from a CORE file.  Core files are managed through 11g Diagnosability, but are not packaged with other diagnostic data automatically.  The core files can be quite large, but may be useful during analysis within Oracle Support.4.  If assistance is required from Oracle Should it become necessary to get assistance from Oracle Support on an ORA-7445 problem, please provide at a minimum, the Alert log  Associated tracefile(s) or incident package at 11g Patch level  information Core file(s)  Information about changes in configuration and/or application prior to  issues  If error is reproducible, a self-contained reproducible testcase: Note.232963.1 How to Build a Testcase for Oracle Data Server Support to Reproduce ORA-600 and ORA-7445 Errors RDA report or Oracle Configuration Manager information Oracle Configuration Manager Quick Start Guide Note 548815.1 My Oracle Support Configuration Management FAQ Note 414966.1 RDA Documentation Index ***For reference to the content in this blog, refer to Note.1092832.1 Master Note for Diagnosing ORA-600

  Read the article

• Oracle WebCenter at the Enterprise 2.0 Conference

  - by Brian Dirking

  We had a great week at the E20 Conference, presenting in four sessions – Andy MacMillan gave a session titled Today’s Successful Enterprises are Social Enterprises and was on a panel that Tony Byrne moderated; Christian Finn spoke on a panel on Unified Communications Unified Communications + Social Computing = Best of Both Worlds?, Mark Bennett spoke on a panel on The Evolution of Talent Management. The key areas of focus this year were sentiment analysis, adoption and community building, the benefits of failure, and social’s role in process applications. Sentiment analysis. This was focused not on external audiences but more on employee sentiment. Tim Young showed his internal "NikoNiko" project, where employees use smilies to report their current mood. The result was a dashboard that showed the company mood by department. Since the goal is to improve productivity, people can see which departments are running into issues and try and address them. A company might otherwise wait until the end of the quarter financials to find out that there was a problem and product didn’t ship. This is a way to identify issues immediately. Tim is great – he had the crowd laughing as soon as he hit the stage, with his proposed hastag for his session: by making it 138 characters long, people couldn’t say much behind his back. And as I tweeted during his session, I loved his comment that complexity diffuses energy - it sounds like something Sun Tzu would say. Another example of employee sentiment analysis was CubeVibe. Founder and CEO Aaron Aycock, in his 3 minute pitch or die session talked about how engaged employees perform better. It was too bad he got gonged, he was just picking up speed, but CubeVibe did win the vote – congratulations to them. Internal adoption, community building, and involvement. On this topic I spoke to Terri Griffith, and she said there is some good work going on at University of Indiana regarding this, and hinted that she might be blogging about it in the near future. This area holds lots of interest for me. Amongst our customers, - CPAC stands out as an organization that has successfully built a community. So, I wonder - what are the building blocks? A strong leader? A common or unifying purpose? A certain level of engagement? I imagine someone has created an equation that says “for a community to grow at 30% per month, there must be an engagement level x to the square root of y, where x equals current community size, and y equals the expected growth rate, and the result is how many engagements the average user must contribute to maintain that growth.” Does anyone have a framework like that? The net result of everyone’s experience is that there is nothing to do but start early and fail often. Kevin Jones made this the focus of his keynote. He talked about the types of failure and what they mean. And he showed his famous kids at work video: Kevin’s blog also has this post: Social Business Failure #8: Workflow Integration. This is something that we’ve been working on at Oracle. Since so much of business is based in enterprise applications such as ERP and CRM (and since Oracle offers e-Business Suite, Siebel, PeopleSoft, and JD Edwards, as well as Fusion Applications), it makes sense that the social capabilities of Oracle WebCenter is built right into these applications. There are two types of social collaboration – ad-hoc, and exception handling. When you are in a business process and encounter an exception, you immediately look for 1) the document that tells you how to handle it, or 2) the person who can tell you how to handle it. With WebCenter built into these processes, people either search their content management system, or engage in expertise location and conversation. The great thing is, THEY DON’T HAVE TO LEAVE THE APPLICATION TO DO IT. Oracle has built the social capabilities right into the applications and business processes. I don’t think enough folks were able to see that at the event, but I expect that over the next six months folks will become very aware of it. WebCenter also provides the ability to have ad-hoc collaboration, search, and expertise location that folks need when they are innovating or collaborating. We demonstrated Oracle Social Network. It’s built on our Oracle WebCenter product to provide social collaboration inside and outside of your company. When we showed it to people, there were a number of areas that they commented on that were different from the other products being shown at the conference: Screenshots from within the product Many authors working on documents simultaneously Flagging people for follow up Direct ability to call out to people Ability to see presence not just if someone is online, but which conversation they are actively in Great stuff, the conference was full of smart people that that we enjoy spending time with. We’ll keep up in the meantime, but we look forward to seeing you in Boston.

  Read the article

• WebCenter Content shared folders for clustering

  - by Kyle Hatlestad

  When configuring a WebCenter Content (WCC) cluster, one of the things which makes it unique from some other WebLogic Server applications is its requirement for a shared file system.  This is actually not any different then 10g and previous versions of UCM when it ran directly on a JVM.  And while it is simple enough to say it needs a shared file system, there are some crucial details in how those directories are configured. And if they aren't followed, you may result in some unwanted behavior. This blog post will go into the details on how exactly the file systems should be split and what options are required. Beyond documents being stored on the file system and/or database and metadata being stored in the database along with other structured data, there is other information being read and written to on the file system.  Information such as user profile preferences, workflow item state information, metadata profiles, and other details are stored in files.  In addition, for certain processes within WCC, each of the nodes needs to know what the other nodes are doing so they don’t step on each other.  WCC keeps track of this through the use of lock files on the file system.  Because of this, each node of the WCC must have access to the same file system just as they have access to the same database. WCC uses its own locking mechanism using files, so it also needs to have access to those files without file attribute caching and without locking being done by the client (node).  If one of the nodes accesses a certain status file and it happens to be cached, that node might attempt to run a process which another node is already working on.  Or if a particular file is locked by one of the node clients, this could interfere with access by another node.  Unfortunately, when disabling file attribute caching on the file share, this can impact performance.  So it is important to only disable caching and locking on the particular folders which require it.  When configuring WebCenter Content after deploying the domain, it asks for 3 different directories: Content Server Instance Folder, Native File Repository Location, and Weblayout Folder.  And starting in PS5, it now asks for the User Profile Folder. Even if you plan on storing the content in the database, you still need to establish a Native File (Vault) and Weblayout directories.  These will be used for handling temporary files, cached files, and files used to deliver the UI. For these directories, the only folder which needs to have the file attribute caching and locking disabled is the ‘Content Server Instance Folder’.  So when establishing this share through NFS or a clustered file system, be sure to specify those options. For instance, if creating the share through NFS, use the ‘noac’ and ‘nolock’ options for the mount options. For the other directories, caching and locking should be enabled to provide best performance to those locations.   These directory path configurations are contained within the <domain dir>\ucm\cs\bin\intradoc.cfg file: #Server System PropertiesIDC_Id=UCM_server1 #Server Directory Variables IdcHomeDir=/u01/fmw/Oracle_ECM1/ucm/idc/ FmwDomainConfigDir=/u01/fmw/user_projects/domains/base_domain/config/fmwconfig/ AppServerJavaHome=/u01/jdk/jdk1.6.0_22/jre/ AppServerJavaUse64Bit=true IntradocDir=/mnt/share_no_cache/base_domain/ucm/cs/ VaultDir=/mnt/share_with_cache/ucm/cs/vault/ WeblayoutDir=/mnt/share_with_cache/ucm/cs/weblayout/ #Server Classpath variables #Additional Variables #NOTE: UserProfilesDir is only available in PS5 – 11.1.1.6.0UserProfilesDir=/mnt/share_with_cache/ucm/cs/data/users/profiles/ In addition to these folder configurations, it’s also recommended to move node-specific folders to local disk to avoid unnecessary traffic to the shared directory.  So on each node, go to <domain dir>\ucm\cs\bin\intradoc.cfg and add these additional configuration entries: VaultTempDir=<domain dir>/ucm/<cs>/vault/~temp/ TraceDirectory=<domain dir>/servers/<UCM_serverN>/logs/EventDirectory=<domain dir>/servers/<UCM_serverN>/logs/event/ And of course, don’t forget the cluster-specific configuration values to add as well.  These can be added through Admin Server -> General Configuration -> Additional Configuration Variables or directly in the <IntradocDir>/config/config.cfg file: ArchiverDoLocks=true DisableSharedCacheChecking=true ServiceAllowRetry=true    (use only with Oracle RAC Database)PublishLockTimeout=300000  (time can vary depending on publishing time and number of nodes) For additional information and details on clustering configuration, I highly recommend reviewing document [1209496.1] on the support site.  In addition, there is a great step-by-step guide on setting up a WebCenter Content cluster [1359930.1].

  Read the article

• Goto for the Java Programming Language

  - by darcy

  Work on JDK 8 is well-underway, but we thought this late-breaking JEP for another language change for the platform couldn't wait another day before being published. Title: Goto for the Java Programming Language Author: Joseph D. Darcy Organization: Oracle. Created: 2012/04/01 Type: Feature State: Funded Exposure: Open Component: core/lang Scope: SE JSR: 901 MR Discussion: compiler dash dev at openjdk dot java dot net Start: 2012/Q2 Effort: XS Duration: S Template: 1.0 Reviewed-by: Duke Endorsed-by: Edsger Dijkstra Funded-by: Blue Sun Corporation Summary Provide the benefits of the time-testing goto control structure to Java programs. The Java language has a history of adding new control structures over time, the assert statement in 1.4, the enhanced for-loop in 1.5,and try-with-resources in 7. Having support for goto is long-overdue and simple to implement since the JVM already has goto instructions. Success Metrics The goto statement will allow inefficient and verbose recursive algorithms and explicit loops to be replaced with more compact code. The effort will be a success if at least twenty five percent of the JDK's explicit loops are replaced with goto's. Coordination with IDE vendors is expected to help facilitate this goal. Motivation The goto construct offers numerous benefits to the Java platform, from increased expressiveness, to more compact code, to providing new programming paradigms to appeal to a broader demographic. In JDK 8, there is a renewed focus on using the Java platform on embedded devices with more modest resources than desktop or server environments. In such contexts, static and dynamic memory footprint is a concern. One significant component of footprint is the code attribute of class files and certain classes of important algorithms can be expressed more compactly using goto than using other constructs, saving footprint. For example, to implement state machines recursively, some parties have asked for the JVM to support tail calls, that is, to perform a complex transformation with security implications to turn a method call into a goto. Such complicated machinery should not be assumed for an embedded context. A better solution is just to expose to the programmer the desired functionality, goto. The web has familiarized users with a model of traversing links among different HTML pages in a free-form fashion with some state being maintained on the side, such as login credentials, to effect behavior. This is exactly the programming model of goto and code. While in the past this has been derided as leading to "spaghetti code," spaghetti is a tasty and nutritious meal for programmers, unlike quiche. The invokedynamic instruction added by JSR 292 exposes the JVM's linkage operation to programmers. This is a low-level operation that can be leveraged by sophisticated programmers. Likewise, goto is a also a low-level operation that should not be hidden from programmers who can use more efficient idioms. Some may object that goto was consciously excluded from the original design of Java as one of the removed feature from C and C++. However, the designers of the Java programming languages have revisited these removals before. The enum construct was also left out only to be added in JDK 5 and multiple inheritance was left out, only to be added back by the virtual extension method methods of Project Lambda. As a living language, the needs of the growing Java community today should be used to judge what features are needed in the platform tomorrow; the language should not be forever bound by the decisions of the past. Description From its initial version, the JVM has had two instructions for unconditional transfer of control within a method, goto (0xa7) and goto_w (0xc8). The goto_w instruction is used for larger jumps. All versions of the Java language have supported labeled statements; however, only the break and continue statements were able to specify a particular label as a target with the onerous restriction that the label must be lexically enclosing. The grammar addition for the goto statement is: GotoStatement: goto Identifier ; The new goto statement similar to break except that the target label can be anywhere inside the method and the identifier is mandatory. The compiler simply translates the goto statement into one of the JVM goto instructions targeting the right offset in the method. Therefore, adding the goto statement to the platform is only a small effort since existing compiler and JVM functionality is reused. Other language changes to support goto include obvious updates to definite assignment analysis, reachability analysis, and exception analysis. Possible future extensions include a computed goto as found in gcc, which would replace the identifier in the goto statement with an expression having the type of a label. Testing Since goto will be implemented using largely existing facilities, only light levels of testing are needed. Impact Compatibility: Since goto is already a keyword, there are no source compatibility implications. Performance/scalability: Performance will improve with more compact code. JVMs already need to handle irreducible flow graphs since goto is a VM instruction.

  Read the article

• First Foray&ndash;About timeout

  - by SQLMonger

  It has been quite a while since I signed up for this blog site and high time that something was posted.  I have a list of topics that I will be working through and posting.  Some I am sure will have been posted by others, but I will be sticking to the technical problems and challenges that I’ve recently faced, and the solutions that worked for me.  My motto when learning something new has always been “My kingdom for an example!”, and I plan on delivering useful examples here so others can learn from my efforts, failures and successes.   A bit of background about me… My name is Clayton Groom. I am a founding partner of a consulting firm in St. Louis Missouri, Covenant Technology Partners, LLC and focus on SQL Server Data Warehouse design, Analysis Services and Enterprise Reporting solutions.  I have been working with SQL Server since the early nineties, when it still only ran on OS/2. I love solving puzzles and technical challenges.   Enough about me… On to a real problem… SSIS Connection Time outs versus Command Time outs Last week, I was working on automating the processing for a large Analysis Services cube.  I had reworked an SSIS package and script task originally posted by Vidas Matelis that automates the process of adding new and dropping old partitions to/from an Analysis Services cube.  I had the package working great, tested, and ready for deployment.  It basically performs a query against the source system to determine if there is new data in the warehouse that will require a new partition to be added to the cube, and it checks the cube to see if there are any partitions that are present that are no longer needed in a rolling 60 month window. My client uses Tivoli for running all their production jobs, and not SQL Agent, so I had to build a command line file for Tivoli to use to run the package. Everything was going great. I had tested the command file from my development workstation using an XML configuration file to pass in server-specific parameters into the package when executed using the DTExec utility. With all the pieces ready, I updated the dtsconfig file to point to the UAT environment and started working with the Tivoli developer to test the job.  On the first run, the job failed, and from what I could see in the SSIS log, it had failed because of a timeout. Other errors in the log made me think that perhaps the connection string had not been passed into the package correctly. We bumped the Connection Manager  timeout values from 20 seconds to 120 seconds and tried again. The job still failed. After changing the command line to use the /SET option instead of the /CONFIGFILE option, we tested again, and again failure. After a number more failed attempts, and getting the Teradata DBA involved to monitor and see if we were connecting and failing or just failing to connect, we determined that the job was indeed connecting to the server and then disconnecting itself after 30 seconds.  This seemed odd, as we had the timeout values for the connection manager set to 180 seconds by then.  At this point one of the DBA’s found a post on the Teradata forum that had the clues to the puzzle: There is a separate “CommandTimeout” custom property on the Data source object that may needed to be adjusted for longer running queries.  I opened up the SSIS package, opened the data flow task that generated the partition list table and right-clicked on the data source. from the context menu, I selected “Show Advanced Editor” and found the property. Sure enough, it was set to 30 seconds. The CommandTimeout property can also be edited in the SSIS Properties sheet. In order to determine how long the timeout needed to be, I ran the query from the task in the development environment and received a response in a matter of seconds.  I then tried the same query against the production database and waited several minutes for a response. This did not seem to be a reasonable response time for the query involved, and indeed it wasn’t. The Teradata DBA’s adjusted the query governor settings for the service account I was testing with, and we were able to get the response back down under a minute.  Still, I set the CommandTimeout property to a much higher value in case the job was ever started during a time of high-demand on the production server. With this change in place, the job finally completed successfully.  The lesson learned for me was two-fold: Always compare query execution times between development and production environments, and don’t assume that production will always be faster.  With higher user demands, query governors, and a whole lot more data, the execution time of even what might seem to be simple queries can vary greatly. SSIS Connection time out settings do not affect command time outs.  Connection timeouts control how long the package will wait for a response from the server before assuming the server is not available or is not responding. Command time outs control how long a task will wait for results to start being returned before deciding that the server is not responding. Both lessons seem pretty straight forward, and I felt pretty sheepish once I finally figured out what the issue was.  To be fair though, In the 5+ years that I have been working with SSIS, I could only recall one other time where I had to set the CommandTimeout property, and that memory only resurfaced while I was penning this post.

  Read the article

• Easy Made Easier

  - by dragonfly

      How easy is it to deploy a 2 node, fully redundant Oracle RAC cluster? Not very. Unless you use an Oracle Database Appliance. The focus of this member of Oracle's Engineered Systems family is to simplify the configuration, management and maintenance throughout the life of the system, while offering pay-as-you-grow scaling. Getting a 2-node RAC cluster up and running in under 2 hours has been made possible by the Oracle Database Appliance. Don't take my word for it, just check out these blog posts from partners and end users. The Oracle Database Appliance Experience - Zip Zoom Zoom http://www.fuadarshad.com/2012/02/oracle-database-appliance-experience.html Off-the-shelf Oracle database servers http://normanweaver.wordpress.com/2011/10/10/off-the-shelf-oracle-database-servers/ Oracle Database Appliance – Deployment Steps http://marcel.vandewaters.nl/oracle/database-appliance/oracle-database-appliance-deployment-steps     See how easy it is to deploy an Oracle Database Appliance for high availability with RAC? Now for the meat of this post, which is the first in a series of posts describing tips for making the deployment of an ODA even easier. The key to the easy deployment of an Oracle Database Appliance is the Appliance Manager software, which does the actual software deployment and configuration, based on best practices. But in order for it to do that, it needs some basic information first, including system name, IP addresses, etc. That's where the Appliance Manager GUI comes in to play, taking a wizard approach to specifying the information needed.     Using the Appliance Manager GUI is pretty straight forward, stepping through several screens of information to enter data in typical wizard style. Like most configuration tasks, it helps to gather the required information before hand. But before you rush out to a committee meeting on what to use for host names, and rely on whatever IP addresses might be hanging around, make sure you are familiar with some of the auto-fill defaults for the Appliance Manager. I'll step through the key screens below to highlight the results of the auto-fill capability of the Appliance Manager GUI.     Depending on which of the 2 Configuration Types (Config Type screen) you choose, you will get a slightly different set of screens. The Typical configuration assumes certain default configuration choices and has the fewest screens, where as the Custom configuration gives you the most flexibility in what you configure from the start. In the examples below, I have used the Custom config type.     One of the first items you are asked for is the System Name (System Info screen). This is used to identify the system, but also as the base for the default hostnames on following screens. In this screen shot, the System Name is "oda".     When you get to the next screen (Generic Network screen), you enter your domain name, DNS IP address(es), and NTP IP address(es). Next up is the Public Network screen, seen below, where you will see the host name fields are automatically filled in with default host names based on the System Name, in this case "oda". The System Name is also the basis for default host names for the extra ethernet ports available for configuration as part of a Custom configuration, as seen in the 2nd screen shot below (Other Network). There is no requirement to use these host names, as you can easily edit any of the host names. This does make filling in the configuration details easier and less prone to "fat fingers" if you are OK with these host names. Here is a full list of the automatically filled in host names. 1 2 1-vip 2-vip -scan 1-ilom 2-ilom 1-net1 2-net1 1-net2 2-net2 1-net3 2-net3     Another auto-fill feature of the Appliance Manager GUI follows a common practice of deploying IP Addresses for a RAC cluster in sequential order. In the screen shot below, I entered the first IP address (Node1-IP), then hit Tab to move to the next field. As a result, the next 5 IP address fields were automatically filled in with the next 5 IP addresses sequentially from the first one I entered. As with the host names, these are not required, and can be changed to whatever your IP address values are. One note of caution though, if the first IP Address field (Node1-IP) is filled out and you click in that field and back out, the following 5 IP addresses will be set to the sequential default. If you don't use the sequential IP addresses, pay attention to where you click that mouse. :-)     In the screen shot below, by entering the netmask value in the Netmask field, in this case 255.255.255.0, the gateway value was auto-filled into the Gateway field, based on the IP addresses and netmask previously entered. As always, you can change this value.     My last 2 screen shots illustrate that the same sequential IP address autofill and netmask to gateway autofill works when entering the IP configuration details for the Integrated Lights Out Manager (ILOM) for both nodes. The time these auto-fill capabilities save in entering data is nice, but from my perspective not as important as the opportunity to avoid data entry errors. In my next post in this series, I will touch on the benefit of using the network validation capability of the Appliance Manager GUI prior to deploying an Oracle Database Appliance.

  Read the article

• CodePlex Daily Summary for Wednesday, February 17, 2010

  CodePlex Daily Summary for Wednesday, February 17, 2010New ProjectsAcademic Success Accounting System: The system is intended to use by school teacher to set marks to students and estimate their academic success and possibilities. The client applicat...Access.PowerTools: Access PowerTools is currently a sample MS Access add-in project to try & test features of Add-in Express™ 2009 for Microsoft® Office and .net (ht...AntoonCms: AntoonCms makes it easy to maintain a simple website with it's builtin administration pages. It's developed in C# on target Framework 2.0 The CMS...ASP.NET MVC Mehr Lib: Mehr Lib makes it easier for ASP.NET MVC developers to do develop projects. It's developed in C#. This version currently include Ajax master detail...BCryptTool: Developer tool that calculates BCrypt hash codes for strings. BCrypt is an implementation of the Blowfish cipher and a computationally-expensive ha...Coronasoft Cryostasis scripting engine: A scripting engine that allows you to dynamically load plugins from just about any supported .NET language. Its written in C#. Languages supported ...Critical Point Search: Critical Point Searchcritical points: critical pointsFont Family Name Retrieval: This library helps developer to retrieve the font family name from the TTF, OTF and TTC font files, so that developer can display the font without ...jQuery Form Input Hints Plugin: Automatically display hints on input textboxes in your forms using this jQuery plugin. I wrote this code to be as simple and as easy to use as pos...Kojax: kojax projectKronRetro: KronRetro! Making a Habbo Retro just got easier! Powered by PHP & MySQL you can make a Habbo Retro site fast!MVVM Wrapper Kit: MVVM Wrapper Kit makes it easier for View Model programmers to wrap their business objects and collections while preserving change notification and...ObjectCartographer: ObjectCartographer is an object to object mapper and object factory. It's developed in C#.PE-file Reader Writer API (PERWAPI): PERWAPI is a reader writer module for .NET program executables. It has been used as back-end for progamming language compilers such as Gardens Poi...Pinger: A simple Pinger, pings an address until you press a buttonQPV: 0.1: QPV aka Que pelicula es una aplicacion que consiste crear una base de datos potente de peliculas, criticas e informacion para poder filtrar pelicul...SIMD Detector: This SIMD class helps developers to detect the types of SIMD instruction available on users' processor. It supports Intel and AMD CPUs. It is writt...StackOverflow Test Project: Following Andrew Siemer's StackOverflow Knowledge Exchange Project.WeBlog: A blogging platform built on the MVC framework The project will showcase current technologies such as MVC 2, Silverlight 4 and jQuery 1.4. Data pro...Webmedia: this is my webmedia projectWindows Azure RSS Reader: This is and online RSS reader based on the Windows Azure platformWordEditor. A Word Editor for Windows, and an extended RichTextBox control.: This is a word editor that can be used as a stand alone word processor, or added to an existing project.Домашняя Бухгалтерия: Программа для ведения домашнего бухгалтерского учета финансов. New ReleasesAccess.PowerTools: Access PowerTools Add-In Community Edition v.0.0.1: Access PowerTools Add-In Community Edition v.0.0.1 is a sample MS Access add-in project to try & test Add-in Express™ 2009 for Microsoft® Office an...Active CSS: ActiveCSS-0.1.1: revision for version 0.1ASP.NET: Microsoft Ajax Minifier 4.0: The Microsoft Ajax Minifier enables you to improve the performance of your Ajax applications by reducing the size of your Cascading Style Sheet and...ASP.NET MVC Mehr Lib: V1.0: Mehr Lib V1.0 This version currently include ajax master detail combo facilities.ASP.net Ribbon: Version 1.2: New controls : Expandable gallery Color Picker Multi color File Menu Some JS modifications. Some CSS modifications. Includes some functionna...ASP.NET Web Forms Model-View-Presenter (MVP) Contrib: WebForms MVP Contrib CTP6: This is a release of the WebForms MVP Contrib project for WebForms MVP CTP6. Release includes: WebForms MVP Contrib framework Ninject IoC containerAwesomiumDotNet: AwesomiumDotNet 1.2.1: - Added Awesomium 1.5 features: URL filtering, header rewrite rules, SetOpensExternalLinksInCallingFrame. - Numerous fixes and improvements.BCryptTool: BCryptTool v0.1: The Microsoft .NET Framework 3.5 (SP1) is needed to run this program.Buzz Dot Net: Buzz Dot Net v.1.10216: Features Parse Google Buzz feed to Objects Partial MVVM Implementation Partial OptimizationsCanvas VSDOC Intellisense: v1.0.0.0a: canvas-vsdoc.js and canvas-utils.js JavaScript intellisense for HTML5 Canvas element.CheckHeader: CheckHeader v0.8.5: The Microsoft .NET Framework 3.5 (SP1) is needed to run this program.Claymore MVP: Claymore 1.0.2.0: Changelog Added ASP.NET WebForm support via ClaymoreHttpModule class. Added xsd schema for Visual Studio Intellisense within App.config and Web....Dam Gd - URL Shortner: Dam.gd Version 1.1: This is the latest instalment in our URL shortner. It uses The Easy API http://theeasyapi.com to access data that is used for the back-end analyti...D-AMPS: D-AMPS 0.9.1: Initial version.easySMS: easySMS 1.0 Source code: easySMS 1.0 Source codeFont Family Name Retrieval: 1st Release: Version 1.0.0Free Silverlight & WPF Chart Control - Visifire: Visifire Now Supports DataBinding: Hi, Today we are releasing the much awaited DataBinding feature in Visifire 3.0.3 beta 3. Now you can Bind any DataSource at the Series level so t...GenerateTypedBamApi: Version 2.0: Changes in this release: NEW: Export functionality no longer requires Excel to be installed (uses OLE DB vs. Excel Automation; also enables usage i...Gmail Notifier 2: GmailNotifier2 1.2.1: Fixes issues #9652, #9653iTuner - The iTunes Companion: iTuner 1.1.3699: This includes the first pass of the iTuner Librarian including management of dead tracks, duplicates, and empty directories... While I promised a ...jQuery Form Input Hints Plugin: jQuery.InputHints v1.0: jQuery.InputHints v1.0 Includes Standard & minified source Demo HTML file VS2008 SolutionLibWowArmory: LibWowArmory 0.2.3 beta: LibWowArmory 0.2.3 betaThis release of the LibWowArmory source code matches the WoW Armory as of version 3.3.2. Changes since version 0.2.2:Update...Managed Extensibility Framework: MEF Preview 9: We have merged the .net 3.5 and Silverlight 3 into a single zip. The bin folder contains the binaries for .net 3.5 whereas bin\SL contains the bina...MDX Parser,Builder,DOM and OLAP visual controls with Writeback for Silverlight: Ranet.UILibrary.Olap-1.3.3.0-6571.msi: February 16, 2010 * MdxDesigner: Fix for the issue where when an element is clicked, the mouse wheel stops working until the cursor leaves and r...MEFGeneric: MEFGeneric Preview 9: MEFGeneric Preview 9 release.Mesopotamia Experiment: Mesopotamia 1.2.26: Bug Fixes - mud map - progress window - recycle app domains on robotics engine crashes( in command prompt and visual, major work) - fixed rooomba h...Microsoft Solution Framework for Business Intelligence in Media: Release 1.0: This is the public release of the Microsoft Solution Framework for Business Intelligence in Media (Release 1.0).MVVM Wrapper Kit: MVVM Wrapper Beta: A simple test project is included to get you up and running, and wrapping those business objects.nBayes - Bayesian Filtering in C#: nBayes v0.2: nBayes' indexing system is factored in such a way that you can easily replace the index with a custom implementation. This release introduces an ad...NetSqlAzMan - .NET SQL Authorization Manager: 3.6.0.5: 3.6.0.5 16-February-2010 - Fix: SqlAzManSid Class. "Equals" matches object signiture instead of IAzManSid signiture. When a real null object is pas...ObjectCartographer: ObjectCartographer Code 1.0: This is the first release and contains code to help with object to object mapping (including mapping from one object to multiple objects), object f...Office Apps: 0.8.6: Bug fix's, added Calendar.OI - Open Internet: OI HTML and .XAP files (OI offline): this is the HTML code and the XAP file. please right-click the app at http://bit.ly/openinternet and select "install openinternet application to th...PE-file Reader Writer API (PERWAPI): PERWAPI-1.1.3: Perwapi version 1.1.3 is the complete distribution package. It contains Binary files, pdb files and xml files for the PERWAPI and SymbolRW compone...Pinger: Pinger 1.0.0.0 Binary: The Latest BinaryRNA Comparative Analysis Software Tools: RNA Comparative Analysis Software Tools 2.0: RNA Comparative Analysis Software Tools Version 2.0 Note: The RNA Comparative Analysis Software Tools are provided as is, without any warranty. No...SAL- Self Artificial Learning: Artificial Learning working proof of concept: This is a working proof of concept. It includes the Dev version (in .zip format) and the consumer version (in .exe format)SharePoint Management PowerShell scripts: SharePoint 2010 PowerShell Scripts: All the SharePoint 2010 PowerShell Scripts The first file is an Excel 2010 file allowing to find quiclky and easily the new cmdlets available wi...SIMD Detector: 1st Release: Version 1.3 Supports MMX/MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, SSE4a, SSE5, 3DNow.Terminals: Terminals 1.9 Beta Release: This is a beta release so the new features being added to terminals can be tested properly. The major change in this release is that Terminals has...Text Designer Outline Text Library: 9th minor release: Added the ability to select brush, such as gradient brush or texture brush for the text body. Added CSharp library, TextDesignerCSLibrary. Manage...VivoSocial: VivoSocial 7.0.2: This release has several updated modules. See the Support Forums for more details. Since we update modules very often, we will be changing how we d...WatchersNET CKEditor™ Provider for DotNetNuke: CKEditor Provider 1.6.00: changes CKEditor Upgrade to Version 3.2 SVN 5132 File Browser: After File Upload, File will be Auto Selected File Browser: Icons are corrected ...WordEditor. A Word Editor for Windows, and an extended RichTextBox control.: WordEditor Source Code: This contains the latest solution file, with all project files included.Домашняя Бухгалтерия: Alapha Realease: Принимаются ваши предложения по дизайну и функциональности программы.Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)Image Resizer Powertoy Clone for WindowsMicrosoft SQL Server Community & SamplesASP.NETLiveUpload to FacebookMost Active ProjectsDinnerNow.netRawrBlogEngine.NETSimple SavantNB_Store - Free DotNetNuke Ecommerce Catalog Modulepatterns & practices – Enterprise LibraryPHPExcelSharpyjQuery Library for SharePoint Web ServicesFluent Validation for .NET

  Read the article

• Windows Azure Evolution &ndash; Caching (Preview)

  - by Shaun

  Caching is a popular topic when we are building a high performance and high scalable system not only on top of the cloud platform but the on-premise environment as well. On March 2011 the Windows Azure AppFabric Caching had been production launched. It provides an in-memory, distributed caching service over the cloud. And now, in this June 2012 update, the cache team announce a grand new caching solution on Windows Azure, which is called Windows Azure Caching (Preview). And the original Windows Azure AppFabric Caching was renamed to Windows Azure Shared Caching.   What’s Caching (Preview) If you had been using the Shared Caching you should know that it is constructed by a bunch of cache servers. And when you want to use you should firstly create a cache account from the developer portal and specify the size you want to use, which means how much memory you can use to store your data that wanted to be cached. Then you can add, get and remove them through your code through the cache URL. The Shared Caching is a multi-tenancy system which host all cached items across all users. So you don’t know which server your data was located. This caching mode works well and can take most of the cases. But it has some problems. The first one is the performance. Since the Shared Caching is a multi-tenancy system, which means all cache operations should go through the Shared Caching gateway and then routed to the server which have the data your are looking for. Even though there are some caches in the Shared Caching system it also takes time from your cloud services to the cache service. Secondary, the Shared Caching service works as a block box to the developer. The only thing we know is my cache endpoint, and that’s all. Someone may satisfied since they don’t want to care about anything underlying. But if you need to know more and want more control that’s impossible in the Shared Caching. The last problem would be the price and cost-efficiency. You pay the bill based on how much cache you requested per month. But when we host a web role or worker role, it seldom consumes all of the memory and CPU in the virtual machine (service instance). If using Shared Caching we have to pay for the cache service while waste of some of our memory and CPU locally. Since the issues above Microsoft offered a new caching mode over to us, which is the Caching (Preview). Instead of having a separated cache service, the Caching (Preview) leverage the memory and CPU in our cloud services (web role and worker role) as the cache clusters. Hence the Caching (Preview) runs on the virtual machines which hosted or near our cloud applications. Without any gateway and routing, since it located in the same data center and same racks, it provides really high performance than the Shared Caching. The Caching (Preview) works side-by-side to our application, initialized and worked as a Windows Service running in the virtual machines invoked by the startup tasks from our roles, we could get more information and control to them. And since the Caching (Preview) utilizes the memory and CPU from our existing cloud services, so it’s free. What we need to pay is the original computing price. And the resource on each machines could be used more efficiently.   Enable Caching (Preview) It’s very simple to enable the Caching (Preview) in a cloud service. Let’s create a new windows azure cloud project from Visual Studio and added an ASP.NET Web Role. Then open the role setting and select the Caching page. This is where we enable and configure the Caching (Preview) on a role. To enable the Caching (Preview) just open the “Enable Caching (Preview Release)” check box. And then we need to specify which mode of the caching clusters we want to use. There are two kinds of caching mode, co-located and dedicate. The co-located mode means we use the memory in the instances we run our cloud services (web role or worker role). By using this mode we must specify how many percentage of the memory will be used as the cache. The default value is 30%. So make sure it will not affect the role business execution. The dedicate mode will use all memory in the virtual machine as the cache. In fact it will reserve some for operation system, azure hosting etc.. But it will try to use as much as the available memory to be the cache. As you can see, the Caching (Preview) was defined based on roles, which means all instances of this role will apply the same setting and play as a whole cache pool, and you can consume it by specifying the name of the role, which I will demonstrate later. And in a windows azure project we can have more than one role have the Caching (Preview) enabled. Then we will have more caches. For example, let’s say I have a web role and worker role. The web role I specified 30% co-located caching and the worker role I specified dedicated caching. If I have 3 instances of my web role and 2 instances of my worker role, then I will have two caches. As the figure above, cache 1 was contributed by three web role instances while cache 2 was contributed by 2 worker role instances. Then we can add items into cache 1 and retrieve it from web role code and worker role code. But the items stored in cache 1 cannot be retrieved from cache 2 since they are isolated. Back to our Visual Studio we specify 30% of co-located cache and use the local storage emulator to store the cache cluster runtime status. Then at the bottom we can specify the named caches. Now we just use the default one. Now we had enabled the Caching (Preview) in our web role settings. Next, let’s have a look on how to consume our cache.   Consume Caching (Preview) The Caching (Preview) can only be consumed by the roles in the same cloud services. As I mentioned earlier, a cache contributed by web role can be connected from a worker role if they are in the same cloud service. But you cannot consume a Caching (Preview) from other cloud services. This is different from the Shared Caching. The Shared Caching is opened to all services if it has the connection URL and authentication token. To consume the Caching (Preview) we need to add some references into our project as well as some configuration in the Web.config. NuGet makes our life easy. Right click on our web role project and select “Manage NuGet packages”, and then search the package named “WindowsAzure.Caching”. In the package list install the “Windows Azure Caching Preview”. It will download all necessary references from the NuGet repository and update our Web.config as well. Open the Web.config of our web role and find the “dataCacheClients” node. Under this node we can specify the cache clients we are going to use. For each cache client it will use the role name to identity and find the cache. Since we only have this web role with the Caching (Preview) enabled so I pasted the current role name in the configuration. Then, in the default page I will add some code to show how to use the cache. I will have a textbox on the page where user can input his or her name, then press a button to generate the email address for him/her. And in backend code I will check if this name had been added in cache. If yes I will return the email back immediately. Otherwise, I will sleep the tread for 2 seconds to simulate the latency, then add it into cache and return back to the page. 1: protected void btnGenerate_Click(object sender, EventArgs e) 2: { 3: // check if name is specified 4: var name = txtName.Text; 5: if (string.IsNullOrWhiteSpace(name)) 6: { 7: lblResult.Text = "Error. Please specify name."; 8: return; 9: } 10:  11: bool cached; 12: var sw = new Stopwatch(); 13: sw.Start(); 14:  15: // create the cache factory and cache 16: var factory = new DataCacheFactory(); 17: var cache = factory.GetDefaultCache(); 18:  19: // check if the name specified is in cache 20: var email = cache.Get(name) as string; 21: if (email != null) 22: { 23: cached = true; 24: sw.Stop(); 25: } 26: else 27: { 28: cached = false; 29: // simulate the letancy 30: Thread.Sleep(2000); 31: email = string.Format("{0}@igt.com", name); 32: // add to cache 33: cache.Add(name, email); 34: } 35:  36: sw.Stop(); 37: lblResult.Text = string.Format( 38: "Cached = {0}. Duration: {1}s. {2} => {3}", 39: cached, sw.Elapsed.TotalSeconds.ToString("0.00"), name, email); 40: } The Caching (Preview) can be used on the local emulator so we just F5. The first time I entered my name it will take about 2 seconds to get the email back to me since it was not in the cache. But if we re-enter my name it will be back at once from the cache. Since the Caching (Preview) is distributed across all instances of the role, so we can scaling-out it by scaling-out our web role. Just use 2 instances and tweak some code to show the current instance ID in the page, and have another try. Then we can see the cache can be retrieved even though it was added by another instance.   Consume Caching (Preview) Across Roles As I mentioned, the Caching (Preview) can be consumed by all other roles within the same cloud service. For example, let’s add another web role in our cloud solution and add the same code in its default page. In the Web.config we add the cache client to one enabled in the last role, by specifying its role name here. Then we start the solution locally and go to web role 1, specify the name and let it generate the email to us. Since there’s no cache for this name so it will take about 2 seconds but will save the email into cache. And then we go to web role 2 and specify the same name. Then you can see it retrieve the email saved by the web role 1 and returned back very quickly. Finally then we can upload our application to Windows Azure and test again. Make sure you had changed the cache cluster status storage account to the real azure account.   More Awesome Features As a in-memory distributed caching solution, the Caching (Preview) has some fancy features I would like to highlight here. The first one is the high availability support. This is the first time I have heard that a distributed cache support high availability. In the distributed cache world if a cache cluster was failed, the data it stored will be lost. This behavior was introduced by Memcached and is followed by almost all distributed cache productions. But Caching (Preview) provides high availability, which means you can specify if the named cache will be backup automatically. If yes then the data belongs to this named cache will be replicated on another role instance of this role. Then if one of the instance was failed the data can be retrieved from its backup instance. To enable the backup just open the Caching page in Visual Studio. In the named cache you want to enable backup, change the Backup Copies value from 0 to 1. The value of Backup Copies only for 0 and 1. “0” means no backup and no high availability while “1” means enabled high availability with backup the data into another instance. But by using the high availability feature there are something we need to make sure. Firstly the high availability does NOT means the data in cache will never be lost for any kind of failure. For example, if we have a role with cache enabled that has 10 instances, and 9 of them was failed, then most of the cached data will be lost since the primary and backup instance may failed together. But normally is will not be happened since MS guarantees that it will use the instance in the different fault domain for backup cache. Another one is that, enabling the backup means you store two copies of your data. For example if you think 100MB memory is OK for cache, but you need at least 200MB if you enabled backup. Besides the high availability, the Caching (Preview) support more features introduced in Windows Server AppFabric Caching than the Windows Azure Shared Caching. It supports local cache with notification. It also support absolute and slide window expiration types as well. And the Caching (Preview) also support the Memcached protocol as well. This means if you have an application based on Memcached, you can use Caching (Preview) without any code changes. What you need to do is to change the configuration of how you connect to the cache. Similar as the Windows Azure Shared Caching, MS also offers the out-of-box ASP.NET session provider and output cache provide on top of the Caching (Preview).   Summary Caching is very important component when we building a cloud-based application. In the June 2012 update MS provides a new cache solution named Caching (Preview). Different from the existing Windows Azure Shared Caching, Caching (Preview) runs the cache cluster within the role instances we have deployed to the cloud. It gives more control, more performance and more cost-effect. So now we have two caching solutions in Windows Azure, the Shared Caching and Caching (Preview). If you need a central cache service which can be used by many cloud services and web sites, then you have to use the Shared Caching. But if you only need a fast, near distributed cache, then you’d better use Caching (Preview).   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• CodePlex Daily Summary for Monday, November 28, 2011

  CodePlex Daily Summary for Monday, November 28, 2011Popular ReleasesCommonLibrary.NET: CommonLibrary.NET 0.9.8 - Alpha: A collection of very reusable code and components in C# 4.0 ranging from ActiveRecord, Csv, Command Line Parsing, Configuration, Holiday Calendars, Logging, Authentication, and much more. Samples in <root>\src\Lib\CommonLibrary.NET\Samples CommonLibrary.NET 0.9.8 AlphaNew Dynamic Scripting Language : workitem : 7493 Fixes 1622 6803Widget Suite for DotNetNuke: 01.04.00: The following features/enhancements are associated with this release: Bug: Removed the empty box/white space created by some widgets New Widget: FlexSlider New Widget: Google+ Button New Widget: Klout Badge Sample Widget Script FileTools for SharePoint: Reset SharePoint Configuration Cache: This tool is used to detect the existing location of the SharePoint configuration cache files then remove them to trigger the timer service to rebuild a fresh new cache. This tool runs on any SharePoint box version 2003 and above supporting x64 bit & x32 bit OS assuming .NET framework 3.5 is installed. You must run the tool with elevated privileges if running on Win 2008 server to ensure that the tool has enough rights to restart the timer service. The tool auto-detects whether its running i...WinRT File Based Database: 0.9.1.5: Implement IsBusy property to support Save button state. See Quick Start project that is distributed as part of the download for details on how to implement Save button, use IsBusy property and how to implement SimpleCommand to use behind the Save button.Multiwfn: Multiwfn2.2_source: Multiwfn2.2_sourceBatchus-GUI: Batchus-GUI-vb 0.1.3.3: Here is v0.1.3.3. It is relatively stable. Just need some more designer layout, and tutorials, and templates.Groovy IM: Groovy IM Version 0.3: Groovy IM Version 0.3 for Windows Phone 7Internet Cache Examiner: Internet Cache Examiner 0.9.2: This is the release binary for the 0.9.2 version of Internet Cache Examiner.Composite Data Service Framework: Composite Data Service Framework 1.0: This solution contains the Composite Data Service framework solution along with a Sample Project.FxCop Integrator for Visual Studio 2010: FxCop Integrator 2.0.0 RC: Replaced the MSBuild Tasks installer to fix the bug of the targets file. FxCop Integrator is not affected by this bug. (Nov 28 2011) New FeatureSupported calculating code metrics with Code Metrics PowerTool. (Work Item #6568: 6568). Provided MSBuild tasks. #7454: 7454 Supported to filter out auto-generated code from code analysis result. #7485: 7485 Supported exporting report of code analysis result. Supported multi-project analysis. Supported file level analysis. Added the featu...Terminals: Version 2 - Beta 4 Release: Beta 4 Refresh Build Dont forget to backup your config files BEFORE upgrading! As usual, please take time to use and abuse this release. We left logging in place, and this is a debug build so be sure to submit your logs on each bug reported, and please do report all bugs! Updated the About form to include the date and time of the build. Useful for CI builds to ensure we have the correct version "Favourites" and "History" save their expanded states after app restarts Code cleanup, secu...MiniTwitter: 1.76: MiniTwitter 1.76 ???? ?? ?????????? User Streams ???????????? User Streams ???????????、??????????????? REST ?????????? ?????????????????????????????? ??????????????????????????????Media Companion: MC 3.424b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Movie Show Resolutions... Resolved issue when reverting multiselection of movies to "-none-" Added movie rename support for subtitle files '.srt' & '.sub' Finalised code for '-1' fix - radiobutton to choose either filename or title Fixed issue with Movie Batch Wizard Fanart - ...Advanced Windows Phone Enginering Tool: WPE Downloads: This version of WPE gives you basic updating, restoring, and, erasing for your Windows Phone device.Anno 2070 Assistant: Beta v1.0 (STABLE): Anno 2070 Assistant Beta v1.0 Released! Features Included: Complete Building Layouts for Ecos, Tycoons & Techs Complete Production Chains for Ecos, Tycoons & Techs Completed Credits Screen Known Issues: Not all production chains and building layouts may be on the lists because they have not yet been discovered. However, data is still 99.9% complete. Currently the Supply & Demand, including Calculator screen are disabled until version 1.1.Minemapper: Minemapper v0.1.7: Including updated Minecraft Biome Extractor and mcmap to support the new Minecraft 1.0.0 release (new block types, etc).Visual Leak Detector for Visual C++ 2008/2010: v2.2.1: Enhancements: * strdup and _wcsdup functions support added. * Preliminary support for VS 11 added. Bugs Fixed: * Low performance after upgrading from VLD v2.1. * Memory leaks with static linking fixed (disabled calloc support). * Runtime error R6002 fixed because of wrong memory dump format. * version.h fixed in installer. * Some PVS studio warning fixed.NetSqlAzMan - .NET SQL Authorization Manager: 3.6.0.10: 3.6.0.10 22-Nov-2011 Update: Removed PreEmptive Platform integration (PreEmptive analytics) Removed all PreEmptive attributes Removed PreEmptive.dll assembly references from all projects Added first support to ADAM/AD LDS Thanks to PatBea. Work Item 9775: http://netsqlazman.codeplex.com/workitem/9775VideoLan DotNet for WinForm, WPF & Silverlight 5: VideoLan DotNet for WinForm, WPF, SL5 - 2011.11.22: The new version contains Silverlight 5 library: Vlc.DotNet.Silverlight. A sample could be tested here The new version add and correct many features : Correction : Reinitialize some variables Deprecate : Logging API, since VLC 1.2 (08/20/2011) Add subitem in LocationMedia (for Youtube videos, ...) Update Wpf sample to use Youtube videos Many others correctionsSharePoint 2010 FBA Pack: SharePoint 2010 FBA Pack 1.2.0: Web parts are now fully customizable via html templates (Issue #323) FBA Pack is now completely localizable using resource files. Thank you David Chen for submitting the code as well as Chinese translations of the FBA Pack! The membership request web part now gives the option of having the user enter the password and removing the captcha (Issue # 447) The FBA Pack will now work in a zone that does not have FBA enabled (Another zone must have FBA enabled, and the zone must contain the me...New ProjectsA lightweight database access component: DataAccessor?????????????，??DataAccessor????????????： 1.??????????SQL??，?????SQL???????????； 2.?????????； 3.????????????，??MSAccess??????????????????????????????????????，?????????； 4.?????????????DBMS，??：SqlServer、Oracle??MSAccess，??????DBMS???，??????N?????????； 5.????，?????????DataAccess??????DBMS； 6.???Sql????xml??????????????dbms?SQL?????，??sql??????????????； 7.???，???DLL??????????……AdHoc.Wavesque: Wavesque provides a simple infrastructure to generate waveforms.AIRO - Interoperable Experiment Automation Package: The main goal of this project is to provide engineers and scientists flexible and extendable framework for building test, measurement and control applications. This framework is compatible with IVI-COM drivers and extends IVI Instrument Classes with custom .NET (and COM) interfaces for such devices as: step motors, different positioning devices, magnet power supplies, lock-in amplifiers etc. We maintain IVI Foundation's aim: "simplify upgrading or replacing components in complex test systems...AKBK-Schulprojekt - USB-Guard: Das Projekt USB-Überwachung wird im Rahmen des Anwendungsentwicklungs-Unterrichts des Adolf-Kolping-Berufskollegs geplant und durchgeführt. Die Software wird zur Prävention von Manipulationsversuchen während einer Informatikklausur entwickelt. Sie erkennt manipulierte und nicht erlaubte USB-Datenträger, protokolliert deren Inhalt und gibt ggf. eine Warnung aus. Sie hilft dem Lehrer dabei, Manipulationsversuche schneller und effizienter zu erkennen.Android Vision: Project to learn all things Android and some image processingAuto Fill Title of Document in Document Library in SharePoint 2010: Automatically fill title of any document in any document library in SharePoint 2010.Batchus-GUI: A graphical user interface, used to create batch files.Bazeli: Windows Phone 7 application that supports tracking of expenses.Clannad: This is a family of many things.Csv2Entity: CSV 2 Entity is a serials of tools that deal with CSV files as well as Excel files and Access files. This framework include: A VSIX file which contains VB and CS source code generate wizard for CSV Objects. Read/Write CSV files facilities. Documentation Help facilities.Cypher Bot: Encrypt secrets, messages, documents, files and more. Then decrypt them. Then repeat with the US government's encryption standard: AES 256-bit (Accepted by NIST and NSA).Cypher Bot makes it fun and easy for anyone to secure files. This is the best security solution available on the web. You are now able to encrypt/decrypt files (avi, mov, mpeg, mp3, wav, png, jpg, txt, html, vb, js) and text ALL IN ONE beautiful slick interface. Cypher Bot is developed in visual basic.EmailWebLinker: A very simple text to html converter designed to deal with those email messages that contain a list of links to images. Any http links it finds to pictures are converted inline. eps files are downloaded and rendered. Can be easily extended.FileHasher: This project provides a simple tool for generating and verifying file hashes. I created this to help the QA team I work with. The project is all C# using .NET 3.5 SP1.Financial Controls: WPF/Silverlight Controls for Financial ApplicationsGroovy IM: Groovy IM makes it easy for Windows Phone 7 consumers to chat while on there Windows Phone 7 device(s). Groovy IM is developed in C# under the GPL V2 license.IBlog: Project created to learn things ASP.NETInjectivity (Dependency Injection): Injectivity is a dependency injection framework (written in C#) with a strong focus on the ease of configuration and performance. Having been written over 5 years and at version 2.8 with unit tests & intellisense comments it is a mature framework.Lizard Chess: Chess openings preparation tool using F#. WinForms C# used for UI.MCPD: I am doing a self study course for MCPD in .NET 4 (web track), so I am committing any custom source code as a result of my study in this open source location which I can later show the work for. * MCTS Exam 70-515 Web Applications Development with Microsoft .NET Framework 4MVC TreeView Helper: This fluent MVC TreeView helper makes it easy to build and customize an HTML unordered-list tree from a recursive model.Onion Architecture with ASP.NET MVC: Onion Architecture with ASP.NET MVCOpenBank: OpenBank est une application client/serveur destinée à la gestion de compte banquaire.Philosophy Widget: This Widget for the Mac OS X Dashboard aids in memorizing the association between known works of philosophy and their authors.Physic Engine: Physic EnginePUL Programming Utility Language: PUL is a programming utility language that allows people to do tasks automatically without having to manually do them, which that process would take longer. Using PUL, you can make programs that automatically do the work for you.QuakeMeApp: QuakeMeApp is a Windows Phone 7 Earthquake Alert AppSense/Net SourceCode Field Control: This is a Field Control for Sense/Net ECMS, it provides syntax highlighting.Silverlight Video CoverFlow: This a Silverlight Sample Application including a Coverflow of Video (streaming)SpaceConquest: Incorporated standard design patterns to build a peer to peer game in Java. The game rules were similar in complexity to games like Civilization and StarcraftSPGE - An XNA 2D graphics engine for Windows and Windows Phone 7.: SPGE is an open-source graphics engine build over XNA that allows the creation of simple 2D games that target Windows and Windows Phone 7. The aim of this graphic engine is to allow for an easy creation of simle 2D games, game prototyping, and teaching of game development.SQL CRUD Expression Builder: A library to build sql crud commands that is based on expressions so every part of the sql statement could be an expression like ColumnSetExpression, FilterExpression, JoinExpression, etc, is intended to be agnostic but right now is being tested only with SqlServer and MySql.TDD-Katas: *TDD-Katas* simply defines the Test Driven Development Katas. In this, I tried to create most famous katas to understand what is exactly Kata. So, get into the code and let us know for any improvementTFS Team Project Manager: TFS Team Project Manager automates various tasks across Team Projects in Team Foundation Server. If you find yourself managing multiple Team Projects for an organization and have recurring tasks and questions that repeat themselves over and over again, Team Project Manager probably has some answers for you. Team Project Manager can help you... * Manage build process templates (understanding which build templates are used by which build definitions, uploading new build process templates,...USB Camera Driver for Windows Embedded Compact 7: This project helps people to get the USB camera working on the Windows Embedded Compact 7.This is modified source of the WinCE 6.0 USB Camera Shared source available from the following link http://www.microsoft.com/download/en/details.aspx?id=19512 User Profile with RecordID replicator: <User Profile with RecordID replicator> will let SharePoint 2010 administrators create a new Profile database maintaining the RecordId of the profile to make sure the social features (I like it, tags, notes) are not gone.VS Tool for WSS 3.0: Visual Studio (2005 and 2008) add-ons for WSS. Included: - schema.xml explorerWhs2Smugmug: Windows Home Server Add-In for uploading files to Smugmug. Written in C# using .Net 3.5 and WCF. Also using the Smugmug API Project. ??UBBCODE: PHP????UBBCODE????，??????： 1.??????（10px ? 24px）； 2.????； 3.?????； 4.??????； 5.??????； 6.??????（????????????）； 7.??????； 8.?????； 9.?????； 10.???QQ??，??????； 11.???????（?????，??????????）； 12.?????????； 13.????????； 14.?????????； 15.?????????； 16.?????????。

  Read the article

• CodePlex Daily Summary for Tuesday, November 29, 2011

  CodePlex Daily Summary for Tuesday, November 29, 2011Popular ReleasesMFCMAPI: November 2011 Release: Build: 15.0.0.1029 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeWCF Community Site: WCF Web API Preview 6: Welcome to the sixth preview release of WCF Web API on Codeplex! Install WCF Web API Preview 6 using NuGet New Features/EnhancementsURL form encoding - Http request bodies sent as application/x-www-form-urlencoded can now deserialize into objects and participate in content negotiation. Custom OData entity keys - The ODataFormatter now supports custom conventions for determining which properties identify an entity key. [ServiceContract] is no longer required on the Web API class definiti...Devpad: 4.11: Whats new for Devpad 4.11: New Import Archive Improved Save Dialog Improved Replace Dialog Improved Go To Dialog Minor Bug Fix's, improvements and speed upsSubExtractor: Release 1021: Feature: Allow OcrMap.bin file to be placed in same directory as EXE Feature: Choose Subtitle dialog directory remembered while app is up Feature: Allow Save As when creating Subtitle files (initial directory is remembered) Feature: Allow resizing of all main window dialogs Fix: Issue Id #682 (Dynamically generating the expected baseline and top offsets for characters. This fixes the problem of manually entered characters not in character selector incorrectly being put on a different line or...Home Access Plus+: v7.7: v7.7.1128.2200Added: ShowTo Option on Resources Added: Basic Authentication Logon Method Added: Button on the Live Tracker page to clear logons in the database but not do a remote logoff Updated: jquery from v1.6.2 to v1.7.1 Fixed: Another attempt at fixing the SIMS import in the booking system Fixed: JSON Issues with the Setup Added: More DEBUG Events to the Event Log (note DEBUG not RELEASE) Added: Support for Week A Week B instead of Week 1 and Week 2 Updated: The My Files ...Diagnostics Tool for Microsoft Dynamics CRM 2011: CrmDiagTool2011 (5.1.27.82): NEW FEATURE: DevErrors flag is now accessible for remote server (need to be local admin to access web.config file through administrative share)CommonLibrary.NET: CommonLibrary.NET 0.9.8 - Alpha: A collection of very reusable code and components in C# 4.0 ranging from ActiveRecord, Csv, Command Line Parsing, Configuration, Holiday Calendars, Logging, Authentication, and much more. Samples in <root>\src\Lib\CommonLibrary.NET\Samples CommonLibrary.NET 0.9.8 AlphaNew Dynamic Scripting Language : workitem : 7493 Fixes 1622 6803Widget Suite for DotNetNuke: 01.04.00: The following features/enhancements are associated with this release: Bug: Removed the empty box/white space created by some widgets New Widget: FlexSlider New Widget: Google+ Button New Widget: Klout Badge Sample Widget Script FileFxCop Integrator for Visual Studio 2010: FxCop Integrator 2.0.0 RC: Replaced the MSBuild Tasks installer to fix the bug of the targets file. FxCop Integrator is not affected by this bug. (Nov 28 2011) New FeatureSupported calculating code metrics with Code Metrics PowerTool. (Work Item #6568: 6568). Provided MSBuild tasks. #7454: 7454 Supported to filter out auto-generated code from code analysis result. #7485: 7485 Supported exporting report of code analysis result. Supported multi-project analysis. Supported file level analysis. Added the featu...Terminals: Version 2 - Beta 4 Release: Beta 4 Refresh Build Dont forget to backup your config files BEFORE upgrading! As usual, please take time to use and abuse this release. We left logging in place, and this is a debug build so be sure to submit your logs on each bug reported, and please do report all bugs! Updated the About form to include the date and time of the build. Useful for CI builds to ensure we have the correct version "Favourites" and "History" save their expanded states after app restarts Code cleanup, secu...MiniTwitter: 1.76: MiniTwitter 1.76 ???? ?? ?????????? User Streams ???????????? User Streams ???????????、??????????????? REST ?????????? ?????????????????????????????? ??????????????????????????????Media Companion: MC 3.424b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Movie Show Resolutions... Resolved issue when reverting multiselection of movies to "-none-" Added movie rename support for subtitle files '.srt' & '.sub' Finalised code for '-1' fix - radiobutton to choose either filename or title Fixed issue with Movie Batch Wizard Fanart - ...Advanced Windows Phone Enginering Tool: WPE Downloads: This version of WPE gives you basic updating, restoring, and, erasing for your Windows Phone device.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.37: Fix for issue #16936 - CSS strings containing ASP.NET replacement blocks that contain the same delimiter character(s) as the CSS string cause the CSS parser to barf. Need to use the -aspnet:1 flag to treat the ASP.NET blocks as single entities. Added support for CSS3 @keyframes syntax. Added NuGet package support to the DLL project. Expand the -line switch to also optionally specify the multiline/single line mode, and the spaces-per-tab for multiline mode. Tweak the -pretty switch to be more ...Anno 2070 Assistant: Beta v1.0 (STABLE): Anno 2070 Assistant Beta v1.0 Released! Features Included: Complete Building Layouts for Ecos, Tycoons & Techs Complete Production Chains for Ecos, Tycoons & Techs Completed Credits Screen Known Issues: Not all production chains and building layouts may be on the lists because they have not yet been discovered. However, data is still 99.9% complete. Currently the Supply & Demand, including Calculator screen are disabled until version 1.1.Oil Prices: Oil Prices V1.1: Oil Prices V1.1 Fix Bangchak price listTAXILISM: TAXILISM V1.0: TAXILISMExamine: v1.4 - Beta: A fairly mega release which borrows some behaviors from the currently under development v2.0 version, this means there are some breaking changes which are listed below, though I don't think these breaking changes will affect many. FeaturesUpgraded DLLs to .Net 4.0 runtime Azure support No more file queue, all asynchronous operations are handled by .Net 4.0's async Task scheduling system, this not only increases performance but better handles async operations. Running in async mode will...Minemapper: Minemapper v0.1.7: Including updated Minecraft Biome Extractor and mcmap to support the new Minecraft 1.0.0 release (new block types, etc).Visual Leak Detector for Visual C++ 2008/2010: v2.2.1: Enhancements: * strdup and _wcsdup functions support added. * Preliminary support for VS 11 added. Bugs Fixed: * Low performance after upgrading from VLD v2.1. * Memory leaks with static linking fixed (disabled calloc support). * Runtime error R6002 fixed because of wrong memory dump format. * version.h fixed in installer. * Some PVS studio warning fixed.New Projects.NET WindowsCe MVP Framework: .NET WindowsCe MVP Framework for .NET Compact Framework 2 or higherAndaman Alumini: AluminiSite for andaman studentsAudio Macro Recorder Plugin for Notepad++: kkkkCassandra .Net Provider: Cassandra .Net Provider is a project created to help .Net developers to start to work with Apache Cassandra. Under Cassandra .Net Provider project developers will find a client fully configurable, working with polled connection, where CQL commands can be executed.Code samples for deepcode.co.uk: Code samples to support articles posted on www.deepcode.co.ukContador de Caracteres: Contador de caracteres para Windows Phone 7Data Ductus Utilities: Simple utilities that other may find useful like mongo DataContract mapping etc.dIRC: dIRC is a cutting-edge .Net IRC client library written in C#.Distributed Blackboard: Distributed virtual drawing canvasFileSplit: FileSplit lets you split large files into smaller files for easier sharing and backup. After splitting the files, FileSplit also creates a .bat (batch) file that when clicked, automatically joins the split files into the original file. This is especially useful for those recipients who are not computer saavy.FlagSync: FlagSync is a synchronization and backup tool, which allows you to synchronize or backup your files with local folders (or an extern harddrive or flashdrive) and FTP-Servers, as well as synchronize your non-iPod MP3-Player with iTunes.Fodda: A small utility for downloading pictures and movies from Canon cameras to your computer. The transferred pictures and movies are placed in a directory structure based on the date of creation. E.g. My Pictures\2011\11\27_11_2011. It will probably work equally well with Cameras from other manufacturers.Google Authenticator TOTP C#: An implementation of Google's Authenticator in C# and WPF. It's a Time-based One-time Password (TOTP) described in RFC 6238. You could use it to implement two-factor authentication in your own .Net application.gppfree: gpp freeiOSApps: A collection of iOS appsLineSeriesDemo: LineSeriesDemolospacos23: klk NHash: This is a simple project that integrates with Explorer and Computes MD5 and SHA1.OpenGL Engine: Projekt pisany na projekt zespolowy.PolarConverter: Adjust the measured distance of HRM files created by Polar Heart Rate monitorsRASSUS - Sustav za dijeljenje fotografija: Sustav za dijeljenje fotografija - projekt studenata na fakultetu elektrotehnike i racunarstva.Space Monopoly: Space monopoly is the freeware game of buying and selling shares.StarCraft 2 ladder tiles for Windows Phone 7: StarCraft 2 ladder tiles for Windows Phone 7Validador de CPF/CNPJ: Validador Lógico de CPF ou CNPJ para Windows Phonever2web: Ver2web is an online Club management software developed for the course Webprogramming at Technikum Wien. It is programmed in C# using ASP.net MVC 3, Entity Framework 4.x and Unity 2.2. WPF Wizard Control: WPF user control (not a custom control) for generically hosting multiple-step wizards. Uses MVVM, you create the model and view for each step and optionally configure steps that guide the wizard along a different workflow.yankee-private-project: ??????????，????！

  Read the article

• CodePlex Daily Summary for Wednesday, November 30, 2011

  CodePlex Daily Summary for Wednesday, November 30, 2011Popular ReleasesLINQ to Twitter: LINQ to Twitter Beta v2.0.22: New support for Windows Phone 7.1, 100% Twitter API coverage.Anno 2070 Assistant: Anno 2070 Assistant v1.1: Anno 2070 Assistant v1.1 Released! Features Included: Building Layouts for Ecos, Tycoons & Techs Production Chains for Ecos, Tycoons & Techs Supply Calculator New Features: The new supply calculator will tell you how many of each production chain you need to sustain the current population. Simply plot in your total inhabitants of each type and calculate! Coming in v2.0: Population Calculator Port from hard coded data to XML data Calculate by Residence Feature and some more secret ...Rawr: Rawr 4.3.0: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...BugNET Issue Tracker: BugNET 0.9.131: This is a bug fix release for 0.9 that fixes a number of pressing issues. FixesBGN-1989 - User verification is not working on the latest release BGN-1988 - Send password notification does not include the actual password and throws an error BGN-1987 - Issues revisions stop being updated BGN-1985 - Search by issue id no longer works Fixed issue when user is not authenticated and clicks on the Vote link the user is redirected to page not found (wrong location for the Login.aspx page) N...QuickStart Engine (3D Game Engine for XNA): QuickStart Engine v0.23: Main FeaturesXNA 4.0 compatible Clean engine architecture Makes it easy to make your own game using the engine. Messaging system allows you to communicate between systems and other entities without coupling your code in ways you wouldn't want to. Entity/Component system allows you to make your own objects and customize them very easily. Terrain engine Quad-tree culling Multi-texture splatting Multi-texture normal mapping Smoothing and scaling Physics engine integration Uses Ji...Windows Azure Toolkit for Windows Phone: Windows Azure Toolkit for Windows Phone v1.3.2: Upgraded Windows Azure projects to Windows Azure SDK for .NET – November 2011. Updated BabelCam, CRUDSqlAzure, WPCloud.ACS, and WPCloud.SQL.ACS samples to include default ACS configuration to allow developers running the samples without owning an ACS namespace.VideoLan DotNet for WinForm, WPF & Silverlight 5: VideoLan DotNet for WinForm, WPF, SL5 - 2011.11.29: The new version add and correct many features : Add Medias list property to VlcControl Correction to implement Medias list property Add PlaybackMode property to VlcControl (Loop/Repeat/Default) Remove "--play-and-pause" option in WPF sample Add MediaList Interops Add MediaListPlayer Interops Correction on Interops (error) Add MediaSubItemAdded event on MediaBaseMFCMAPI: November 2011 Release: Build: 15.0.0.1029 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeWCF Community Site: WCF Web API Preview 6: Welcome to the sixth preview release of WCF Web API on Codeplex! Install WCF Web API Preview 6 using NuGet New Features/EnhancementsURL form encoding - Http request bodies sent as application/x-www-form-urlencoded can now deserialize into objects and participate in content negotiation. Custom OData entity keys - The ODataFormatter now supports custom conventions for determining which properties identify an entity key. [ServiceContract] is no longer required on the Web API class definiti...Devpad: 4.11: Whats new for Devpad 4.11: New Import Archive Improved Save Dialog Improved Replace Dialog Improved Go To Dialog Minor Bug Fix's, improvements and speed upsHome Access Plus+: v7.7: v7.7.1128.2200Added: ShowTo Option on Resources Added: Basic Authentication Logon Method Added: Button on the Live Tracker page to clear logons in the database but not do a remote logoff Updated: jquery from v1.6.2 to v1.7.1 Fixed: Another attempt at fixing the SIMS import in the booking system Fixed: JSON Issues with the Setup Added: More DEBUG Events to the Event Log (note DEBUG not RELEASE) Added: Support for Week A Week B instead of Week 1 and Week 2 Updated: The My Files ...CommonLibrary.NET: CommonLibrary.NET 0.9.8 - Alpha: A collection of very reusable code and components in C# 4.0 ranging from ActiveRecord, Csv, Command Line Parsing, Configuration, Holiday Calendars, Logging, Authentication, and much more. Samples in <root>\src\Lib\CommonLibrary.NET\Samples CommonLibrary.NET 0.9.8 AlphaNew Dynamic Scripting Language : workitem : 7493 Fixes 1622 6803Widget Suite for DotNetNuke: 01.04.00: The following features/enhancements are associated with this release: Bug: Removed the empty box/white space created by some widgets New Widget: FlexSlider New Widget: Google+ Button New Widget: Klout Badge Sample Widget Script FileFxCop Integrator for Visual Studio 2010: FxCop Integrator 2.0.0 RC: Replaced the MSBuild Tasks installer to fix the bug of the targets file. FxCop Integrator is not affected by this bug. (Nov 28 2011) New FeatureSupported calculating code metrics with Code Metrics PowerTool. (Work Item #6568: 6568). Provided MSBuild tasks. #7454: 7454 Supported to filter out auto-generated code from code analysis result. #7485: 7485 Supported exporting report of code analysis result. Supported multi-project analysis. Supported file level analysis. Added the featu...Terminals: Version 2 - Beta 4 Release: Beta 4 Refresh Build Dont forget to backup your config files BEFORE upgrading! As usual, please take time to use and abuse this release. We left logging in place, and this is a debug build so be sure to submit your logs on each bug reported, and please do report all bugs! Updated the About form to include the date and time of the build. Useful for CI builds to ensure we have the correct version "Favourites" and "History" save their expanded states after app restarts Code cleanup, secu...MiniTwitter: 1.76: MiniTwitter 1.76 ???? ?? ?????????? User Streams ???????????? User Streams ???????????、??????????????? REST ?????????? ?????????????????????????????? ??????????????????????????????Media Companion: MC 3.424b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Movie Show Resolutions... Resolved issue when reverting multiselection of movies to "-none-" Added movie rename support for subtitle files '.srt' & '.sub' Finalised code for '-1' fix - radiobutton to choose either filename or title Fixed issue with Movie Batch Wizard Fanart - ...Advanced Windows Phone Enginering Tool: WPE Downloads: This version of WPE gives you basic updating, restoring, and, erasing for your Windows Phone device.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.37: Fix for issue #16936 - CSS strings containing ASP.NET replacement blocks that contain the same delimiter character(s) as the CSS string cause the CSS parser to barf. Need to use the -aspnet:1 flag to treat the ASP.NET blocks as single entities. Added support for CSS3 @keyframes syntax. Added NuGet package support to the DLL project. Expand the -line switch to also optionally specify the multiline/single line mode, and the spaces-per-tab for multiline mode. Tweak the -pretty switch to be more ...Get simpler, simpler, and simpler: UI 0.1 Binary: Inklude: you can use it with lib, header and dlls. Uzing: you can use it by adding it to your project.New ProjectsArchiveBytes: ArchiveBytes is an archiving solution with rolling archive capabilities. Arduino Controller: Arduino Controller is a GUI to control and arduino wirelessly using: - XBEES - WIFI - Bluetooth All that is required is: - Arduino Controller - Your wireless technology - And an Arduino If you would like info I'm trying to put together sets that include: - Software - Arduino - And a wireless technology (your choice)Artesis - Studiegids MVC: Artesis StudiegidsAzureHost: AzureHost is a synchronization framework that makes it easy to deploy web application files to Windows Azure and keep them synchronized between Web Roles and Blob Storage. AzureHost is a fork of the Windows Azure Accelerator for Umbraco made more simple and generic.Codes Of My ACE Study: Activity-based Center ExpansionCoreGallery.NET: An extensible .NET-based photo gallery. Project has been inactive for some time and currently in very early planning/prototyping stages. Help is definitely welcome!Custom SharePoint Designer Activities for SharePoint 2010: This project adds to the power of SharePoint Designer workflows by adding additional activities that previously were not available including sending emails with attachments, custom from addresses, and much more. Created with visual studio 2010 for SharePoint 2010.Declarative command line parser: A powerful, declarative command-line parsing system in a single .cs file. This file is available as a nuget package (package id: declcmdparser) and can be easily included or excluded in your project.DevCow: This is a location for all of the community projects that help support DevCow.comejg: ejgFibo.Authority: a authority system based on nhibernate,autofac,asp.net MVC,jquery easyui and so on.Georgia Southern House Control: This is a semester project for a group of students at Georgia Southern university.JSAnalyse - Javascript Analyser and Dependency Checker: JSAnalyse - Javascript Analyser and Dependency CheckerLogger - logging for your .NET project using file, mail, debug output: A light weight yet competent logger for .NET with configurable output modules, such as log file, e-mail and debug log. Easy to add your own output module if needed.MetaEdit+ extension for Visual Studio: Visual Studio extension for integrating MetaEdit+ and Visual Studio. This extension allows you to browse MetaEdit+ models and use the main MetaEdit+ functions from Visual Studio. It can also automatically import into Visual Studio the source code generated from MetaEdit+. MonopolyPatrones: Proyecto de patrones de software universidad Javeriana ColombiaMulti-threaded simple Reversi game: XNA Reversi game supporting multi-core processors. NDuplicate: Finds duplicate code (methods) across a C# solution.Netduino-compatible embedded webserver: Embedded Webserver is a small footprint, multi-platform webserver implementation exposing IIS-like API to web enable your hobby project in four easy steps.Orchard UserReviewedItems: An Orchard module extension of the Contrib.Reviews module. Includes a orchard content part for showing the reviews that are written by the user of the current context.PivotViewer Extensions: PivotViewer Extensions is a collection of add-ons to the Silverlight 5 PivotViewer. PowerShell TFS Build Server CmdLets: A set of CmdLets for managing a Team Foundation Server (TFS) Build server through PowerShell. SABON: Simple Access Business Object Network. This is a JavaScript Library that provides quickest way on accessing HTML elements, and DOM this includes Object/Class Creator, Table Effects, Message Box, Object Pop-up, Email Notification, and caseed: Seed creates complete ASP.NET website from object oriented business model definitions. Programers serves programs? No... Programs serves programers, Yep! "Firstly, I think I will build a system with 90% solid functions, and 10% dynamiic functions, the dynamic functions is the flower blossoming from top of it."Sharpshooter: ????OOP??????，??????。Silverlight Front end calling WCF Service in Azure Web Role: I recently written a sample which has Windows Azure Web Role with Silverlight front end, calling to WCF service which is hosted in the same Windows Azure Web Role. SPWikiDialogFix: For SharePoint 2010: Fix to prevent users from receiving ‘The Ribbon Tab with id: "Ribbon.Read" has not been made available for this page or does not exist. Use Ribbon.MakeTabAvailable()’ when viewing wiki pages in dialog mode. For explanation and details, read the blog post at http://blog.furuknap.net/solving-the-ribbon-tab-with-id-ribbon-read-has-not-been-made-available-for-this-page-or-does-not-exist-use-ribbon-maketabavailable Written in C#, because you deserve it.Trinity Christian School Lunches: This is a semester project for a group of students at Georgia Southern University creating a software packages that allows a school to keep track of the lunch orders of students.wp7project: We`re just training...Zavida: C# learning curve.??: fff

  Read the article

• Best way to integrate StyleCop with TFS CI

  - by Slavo

  I've been doing research on how to enable source analysis for the project I'm working on and plan to use StyleCop. The setup I have is a TFS Server for source control, using TFS Continuous Integration. I want to enable source analysis for CI builds and daily builds run on the build machine, and not only for those run on developers' machines. Here's an article from the documentation of StyleCop that I read on the subject: http://blog.newagesolution.net/2008/07/how-to-use-stylecop-and-msbuild-and.html. It basically modifies the csproj file for the purpose. I've also read other opinions about how StyleCop should be integrated with build automation, which advise doing the same thing using build tasks: http://blog.newagesolution.net/2008/07/how-to-use-stylecop-and-msbuild-and.html http://freetodev.spaces.live.com/blog/cns!EC3C8F2028D842D5!400.entry. What are you opinions? Have you had similar projects and done something like this?

  Read the article

• Comparison of the multiprocessing module and pyro?

  - by fivebells

  I use pyro for basic management of parallel jobs on a compute cluster. I just moved to a cluster where I will be responsible for using all the cores on each compute node. (On previous clusters, each core has been a separate node.) The python multiprocessing module seems like a good fit for this. I notice it can also be used for remote-process communication. If anyone has used both frameworks for remote-process communication, I'd be grateful to hear how they stack up against each other. The obvious benefit of the multiprocessing module is that it's built-in from 2.6. Apart from that, it's hard for me to tell which is better.

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >