Search Results

Search found 1994 results on 80 pages for 'compiling'.

Page 65/80 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• Cutting Ubuntu to the bone for Virtualbox VM

  - by Monty

  I've been looking around for a Linux variant which will install only the software I need rather than everything Ubuntu (for example) puts in by default. This is to create a virtual machine in Virtualbox which has bash, apache, python, perl, SQLite, openssh and a few other programs but nothing else. I'd prefer to go with Ubuntu if possible but another modern distro would do as well (I like using apt-get and yum rather than downloading/compiling etc). So far, I've tried: SuseStudio.com, which is probably the best so far. Pressing F4 to get the boot options on Ubuntu 9.10, but there is no minimal installation (I think there was once). Arch Linux, slightly confusing install procedure but I might go back and try again. Gentoo, started well but fairly soon the HD on the virtual machine went to 2Gb, even before the installation had started in earnest (I'd partitioned the disks is all). I realise there are various "small" Linuxes around like Puppy, Feather, DSL, etc, but they seem to be aimed at desktop users or as a techie's toolkit, and I want a small-as-possible server distro which can be managed with tools like apt or yum or similar. TIA for any advice you can offer! -- Monty

  Read the article

• How should a programmer go about getting started with Flash/Flex/ActionScript?

  - by Graphics Noob

  What is the shortest path between zero (ie no flash related development software on my computer or information about where to obtain it or get started) to running a "hello world" ActionScript? I'm hoping for an answer that gives step by step instructions about exactly what software is needed to get started, an example of some "hello world" code, and instructions for compiling and running the code. I've spent more time than I think should be necessary researching this question and not found much information. Hopefully this question will be found by programmers like me who want to get started with Flash/Flex/ActionScript (After my morning of researching I still don't even know what terminology to use so I'll just throw it all out there). ActionScript tutorials I've found are focused on programming concepts, ie logic, branching, OOP, etc, and some even have code examples to download, but not a single one I've found explains how to compile and run the code. They all seem to assume you have an IDE standing by but no knowledge of programming, exactly the opposite of the position I'm in. Here are the most related SO questions I've found: http://stackoverflow.com/questions/59083/what-is-adobe-flex-is-it-just-flash-ii http://stackoverflow.com/questions/554899/getting-started-with-flex-3-ui-actionscript-programming http://stackoverflow.com/questions/2123105/how-to-learn-flex

  Read the article

• Compile subversion on CentOs

  - by peter

  I have downloaded, compiled and installed so far: apr-1.3.9 apr-util-1.3.9 sqlite-3.6.23 zlib-1.2.4 libtool-2.2.6b Now after downloading subversion-1.6.9, the config works fine but compiling it will end with the following error: cd subversion/svn && /bin/sh /root/subversion-1.6.9/libtool --tag=CC --silent --mode=link gcc -g -O2 -g -O2 -pthread -rpath /usr/local/lib -o svn add-cmd.o blame-cmd.o cat-cmd.o changelist-cmd.o checkout-cmd.o cleanup-cmd.o commit-cmd.o conflict-callbacks.o copy-cmd.o delete-cmd.o diff-cmd.o export-cmd.o help-cmd.o import-cmd.o info-cmd.o list-cmd.o lock-cmd.o log-cmd.o main.o merge-cmd.o mergeinfo-cmd.o mkdir-cmd.o move-cmd.o notify.o propdel-cmd.o propedit-cmd.o propget-cmd.o proplist-cmd.o props.o propset-cmd.o resolve-cmd.o resolved-cmd.o revert-cmd.o status-cmd.o status.o switch-cmd.o tree-conflicts.o unlock-cmd.o update-cmd.o util.o ../../subversion/libsvn_client/libsvn_client-1.la ../../subversion/libsvn_wc/libsvn_wc-1.la ../../subversion/libsvn_ra/libsvn_ra-1.la ../../subversion/libsvn_delta/libsvn_delta-1.la ../../subversion/libsvn_diff/libsvn_diff-1.la ../../subversion/libsvn_subr/libsvn_subr-1.la /usr/local/apr/lib/libaprutil-1.la -lexpat /usr/local/apr/lib/libapr-1.la -lrt -lcrypt -lpthread -ldl /usr/bin/ld: cannot find -lexpat collect2: ld returned 1 exit status make: * [subversion/svn/svn] Error 1 The file at /usr/local/apr/lib/libapr-1.la exists and seems to be OK (from permission perspective What could be the problem here? Thanks Peter

  Read the article

• PDCurses TUI with C++ Win32 console application

  - by Bach

  I have downloaded pdcurses source and was able to successfully include curses.h in my project, linked the pre-compiled library and all good. After few hours of trying out the library, I saw the tuidemo.c in the demos folder, compiled it into an executable and brilliant! exactly what I needed for my project. Now the problem is that it's a C code, and I am working on a C++ project in VS c++ 2008. The files I need are tui.c and tui.h How can I include that C file in my C++ code? I saw few suggestions here but the compiler was not too happy with 100's of warnings and errors. How can I go on including/using that TUI pdcurses includes!? Thanks EDIT: I added extern "C" statement, so my test looks like this now, but I'm getting some other type of error #include <stdio.h> #include <stdlib.h> using namespace std; extern "C" { #include <tui.h> } void sub0(void) { //do nothing } void sub1(void) { //do nothing } int main (int argc, char * const argv[]) { menu MainMenu[] = { { "Asub", sub0, "Go inside first submenu" }, { "Bsub", sub1, "Go inside second submenu" }, { "", (FUNC)0, "" } /* always add this as the last item! */ }; startmenu(MainMenu, "TUI - 'textual user interface' demonstration program"); return 0; } Although it is compiling successfully, it is throwing an Error at runtime: 0xC0000005: Access violation reading location 0x021c52f9 at line startmenu(MainMenu, "TUI - 'textual user interface' demonstration program"); Not sure where to go from here. thanks again.

  Read the article

• Java: easiest way to package both Java 1.5 and 1.6 code

  - by WizardOfOdds

  I want to package a piece of code that absolutely must run on Java 1.5. There's one part of the code where the program can be "enhanced" if the VM is an 1.6 VM. Basically it's this method: private long[] findDeadlockedThreads() { // JDK 1.5 only supports the findMonitorDeadlockedThreads() // method, so you need to comment out the following three lines if (mbean.isSynchronizerUsageSupported()) return mbean.findDeadlockedThreads(); else return mbean.findMonitorDeadlockedThreads(); } What would be easiest way to have this compile on 1.5 and yet do the 1.6 method calls when on 1.6 ? In the past I've done something similar by compiling a unique 1.6 class that I would package with my app and instantiate using a ClassLoader when on 1.6 (because an 1.6 JVM is perfectly fine mixing 0x32 and 0x31 classes), but I think it's a bit overkill (and a bit painful because during the build process you have to build both 0x31 and 0x32 .class files). How should I go if I wanted to compile the above method on 1.5? Maybe using reflection but then how (I'm not familiar at all with reflection) Note: if you're curious, the above method comes from this article: http://www.javaspecialists.eu/archive/Issue130.html (but I don't want to "comment the three lines" like in the article, I want this to compile and run on both 1.5 and 1.6)

  Read the article

• why doesn't winmain set the errorlevel?

  - by Brian R. Bondy

  int APIENTRY _tWinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPTSTR lpCmdLine, int nCmdShow) { MessageBox(NULL, _T("This should return 90 no?"), _T("OK"), MB_OK); return 90; } Why does the above program correctly display the message box, but does not set the error level? I compile this program to the name a.exe. Then from command prompt I type: c:\> a.exe (message box is displayed, I press ok) c:\> echo %ERRORLEVEL% 0 I get the same results if I do exit(90); right before the return. It still says 0. I also tried to start the program via CreateProcess and obtain the result with GetExitCodeProcess but it also returns 0 to me. I did error checking to ensure it was all started correctly. I originally seen this problem in a more complex program. But made this simple program to verify the problem. Results are the same, both programs that have WinMain return 0 always. I tried both x64, x86 and unicode and MBCS compiling options. All give 0 as an error level/status code.

  Read the article

• C++ Numerical truncation error

  - by Andrew

  Hello everyone, sorry if dumb but could not find an answer. #include <iostream> using namespace std; int main() { double a(0); double b(0.001); cout << a - 0.0 << endl; for (;a<1.0;a+=b); cout << a - 1.0 << endl; for (;a<10.0;a+=b); cout << a - 10.0 << endl; cout << a - 10.0-b << endl; return 0; } Output: 0 6.66134e-16 0.001 -1.03583e-13 Tried compiling it with MSVC9, MSVC10, Borland C++ 2010. All of them arrive in the end to the error of about 1e-13. Is it normal to have such a significant error accumulation over only a 1000, 10000 increments?

  Read the article

• How do I create a python module from a fortran program with f2py?

  - by Lars Hellemo

  I am trying to read some smps files with python, and found a fortran implementation, so I thought I would give f2py a shot. The problem is that I have no experience with fortran. I have successfully installed gfortran and f2py on my Linux box and ran the example on thew f2py page, but I have some trouble compiling and running the large program. There are two files, one with a file reader wrapper and one with all the logic. They seem to call each other, but when I compile and link or try f2py, I get errors that they somehow can't find each other: f95 -c FILEWR~1.F f95 -c SMPSREAD.F90 f95 -o smpsread SMPSREAD.o FILEWR~1.o FILEWR~1.o In function `file_wrapper_' FILEWR~1.F(.text+0x3d) undefined reference to `chopen_' usrlibgcci486-linux-gnu4.4.1libgfortranbegin.a(fmain.o) In function `main' (.text+0x27) undefined reference to `MAIN__' collect2 ld returned 1 exit status I also tried changing the name to FILE_WRAPPER.F but that did not help. With f2py I found out I had to include a comment to get it to accept free format, and saved this as a new file and tried: f2py -c -m smpsread smpsread.f90 I get a lot of output and warnings, but the error seems to be this one: getctype: No C-type found in "{'typespec': 'type', 'attrspec': ['allocatable'], 'typename': 'node', 'dimension': [':']}", assuming void. The fortran 90 spms reader can be found here. Any help or suggestions appreciated.

  Read the article

• Why this Either-monad code does not type check?

  - by pf_miles

  instance Monad (Either a) where return = Left fail = Right Left x >>= f = f x Right x >>= _ = Right x this code frag in 'baby.hs' caused the horrible compilation error: Prelude> :l baby [1 of 1] Compiling Main ( baby.hs, interpreted ) baby.hs:2:18: Couldn't match expected type `a1' against inferred type `a' `a1' is a rigid type variable bound by the type signature for `return' at <no location info> `a' is a rigid type variable bound by the instance declaration at baby.hs:1:23 In the expression: Left In the definition of `return': return = Left In the instance declaration for `Monad (Either a)' baby.hs:3:16: Couldn't match expected type `[Char]' against inferred type `a1' `a1' is a rigid type variable bound by the type signature for `fail' at <no location info> Expected type: String Inferred type: a1 In the expression: Right In the definition of `fail': fail = Right baby.hs:4:26: Couldn't match expected type `a1' against inferred type `a' `a1' is a rigid type variable bound by the type signature for `>>=' at <no location info> `a' is a rigid type variable bound by the instance declaration at baby.hs:1:23 In the first argument of `f', namely `x' In the expression: f x In the definition of `>>=': Left x >>= f = f x baby.hs:5:31: Couldn't match expected type `b' against inferred type `a' `b' is a rigid type variable bound by the type signature for `>>=' at <no location info> `a' is a rigid type variable bound by the instance declaration at baby.hs:1:23 In the first argument of `Right', namely `x' In the expression: Right x In the definition of `>>=': Right x >>= _ = Right x Failed, modules loaded: none. why this happen? and how could I make this code compile ? thanks for any help~

  Read the article

• A monkey could do this better - Access to and availability of private member functions in C++

  - by David

  I am wandering the desert of my brain. I'm trying to write something like the following: class MyClass { // Peripherally Related Stuff public: void TakeAnAction(int oneThing, int anotherThing) { switch(oneThing){ case THING_A: TakeThisActionWith(anotherThing); break; //cases THINGS_NOT_A: }; private: void TakeThisActionWith(int thing) { string outcome = new string; outcome = LookUpOutcome(thing); // Do some stuff based on outcome return; } string LookUpOutcome(int key) { string oc = new string; oc = MyPrivateMap[key]; return oc; } map<int, string> MyPrivateMap; Then in the .cc file where I am actually using these things, while compiling the TakeAnAction section, it [CC, the solaris compiler] throws an an error: 'The function LookUpOutcome must have a prototype' and bombs out. In my header file, I have declared 'string LookUpOutcome(int key);' in the private section of the class. I have tried all sorts of variations. I tried to use 'this' for a little while, and it gave me 'Can only use this in non-static member function.' Sadly, I haven't declared anything static and these are all, putatively, member functions. I tried it [on TakeAnAction and LookUp] when I got the error, but I got something like, 'Can't access MyPrivateMap from LookUp'. MyPrivateMap could be made public and I could refer to it directly, I guess, but my sensibility says that is not the right way to go about this [that means that namespace scoped helper functions are out, I think]. I also guess I could just inline the lookup and subsequent other stuff, but my line-o-meter goes on tilt. I'm trying desperately not to kludge it.

  Read the article

• How can I create an executable to run on a certain processor architecture (instead of certain OS)?

  - by CrazyJugglerDrummer

  So I take my C++ program in Visual studio, compile, and it'll spit out a nice little EXE file. But EXEs will only run on windows, and I hear a lot about how C/C++ compiles into assembly language, which is runs directly on a processor. The EXE runs with the help of windows, or I could have a program that makes an executable that runs on a mac. But aren't I compiling C++ code into assembly language, which is processor specific? My Insights: I'm guessing I'm probably not. I know there's an Intel C++ compiler, so would it make processor-specific assembly code? EXEs run on windows, so they advantage of tons of things already set up, from graphics packages to the massive .NET framework. A processor-specific executable would be literally starting from scratch, with just the instruction set of the processor. Would this executable be a file-type? We could be running windows and open it, but then would control switch to processor only? I assume this executable would be something like an operating system, in that it would have to be run before anything else was booted up, and have only the processor instruction set to "use".

  Read the article

• Should a new language compiler target the JVM?

  - by Pindatjuh

  I'm developing a new language. My initial target was to compile to native x86 for the Windows platform, but now I am in doubt. I've seen some new languages target the JVM (most notable Scala and Clojure). Ofcourse it's not possible to port every language easily to the JVM; to do so, it may lead to small changes to the language and it's design. So that's the reason behind this doubt, and thus this question: Is targetting the JVM a good idea, when creating a compiler for a new language? Or should I stick with x86? I have experience in generating JVM bytecode. Are there any workarounds to JVM's GC? The language has deterministic implicit memory management. How to produce JIT-compatible bytecode, such that it will get the highest speedup? Is it similar to compiling for IA-32, such as the 4-1-1 muops pattern on Pentium? I can imagine some advantages (please correct me if I'm wrong): JVM bytecode is easier than x86. Like x86 communicates with Windows, JVM communicates with the Java Foundation Classes. To provide I/O, Threading, GUI, etc. Implementing "lightweight"-threads.I've seen a very clever implementation of this at http://www.malhar.net/sriram/kilim/. Most advantages of the Java Runtime (portability, etc.) The disadvantages, as I imagined, are: Less freedom? On x86 it'll be more easy to create low-level constructs, while JVM has a higher level (more abstract) processor. Most disadvantages of the Java Runtime (no native dynamic typing, etc.)

  Read the article

• TypeScript - separating code output

  - by Andrea Baccega

  i'm trying typescript and I find it very useful. I've a quite large project and i was considering rewriting it using typescript. The main problem here is the following: file A.ts: class A extends B { // A stuff } file B.ts: class B { // B stuff } If I compile A.ts with this command: tsc --out compiledA.js A.ts I'll get error from the compiler cause he doesn't know how to threat the "B" after extends. So, a "solution" would be including in A.ts (as first line of code): /// <reference path="./B.ts" /> Compiling again A.ts with the same command tsc --out compiledA.js A.ts Will result in compiledA.js containing both B.ts and A.ts code. ( which could be very nice ) In my case, I only need to compile the A.ts code in the compiledA.js file and I don't want the B.ts stuff to be in there. Indeed, what I want is: tsc --out A.js A.ts = compile only the A.ts stuff tsc --out B.js B.ts = compile only the B.ts stuff I can do it by removing the "extends" keyword but doing that I'll loose most of the typescript goodness. Can someone telll me if there's a way to do this ?

  Read the article

• how do I get eclipse to use a different compiler version for Java?

  - by codeman73

  It seems like this should be a simple task, with the options in the Preferences menu for different JREs and the ability to set different compiler and build paths per project. However, it also seems to simply not work. For example, I have my JAVA_HOME set to a jre for Java 1.6. It's still not clear to me how Eclipse uses this, but it appears to be defaulting to this and not taking the project overrides. I have also installed Java 1.5, and added a JRE for this in eclipse in the Java-Installed JREs section. In my project, I've set the compiler compliance level to 1.5. In the build path for the project, I've added the System Library for the Java 1.5 JRE. However, I'm getting compile errors for a class that implements PreparedStatement for not implementing abstract methods that only exist in Java 1.6 PreparedStatement. Specifically, the methods setAsciiStream(int, InputStream, long) and setAsciiStream(int, InputStream) Strangely enough, it worked when we were compiling it against Java 1.4, which it was originally written for. We added the JREs for Java 1.4 and referenced that system library in the project, and set the project's compiler level to 1.4, and it works fine. But when I do the same changes to try to point to Java 1.5, it instead uses 1.6. Any ideas why?

  Read the article

• How do tools like Hiphop for PHP deal with heterogenous arrays?

  - by Derek Thurn

  I think HipHop for PHP is an interesting tool. It essentially converts PHP code into C++ code. Cross compiling in this manner seems like a great idea, but I have to wonder, how do they overcome the fundamental differences between the two type systems? One specific example of my general question is heterogeneous data structures. Statically typed languages don't tend to let you put arbitrary types into an array or other container because they need to be able to figure out the types on the other end. If I have a PHP array like this: $mixedBag = array("cat", 42, 8.5, false); How can this be represented in C++ code? One option would be to use void pointers (or the superior version, boost::any), but then you need to cast when you take stuff back out of the array... and I'm not at all convinced that the type inferencer can always figure out what to cast to at the other end. A better option, perhaps, would be something more like a union (or boost::variant), but then you need to enumerate all possible types at compile time... maybe possible, but certainly messy since arrays can contain arbitrarily complex entities. Does anyone know how HipHop and similar tools which go from a dynamic typing discipline to a static discipline handle these types of problems?

  Read the article

• If Then Else Statement Condition Being Ignored?

  - by Matma

  I think im going mad but can some show me what im missing, it must be some stupidly simple i just cant see the wood for the trees. BOTH side of this if then else statement are being executed? Ive tried commenting out the true side and moving the condition to a seperate variable with the same result. However if i explicitly set the condition to 1=0 or 1=1 then the if then statement is operating as i would expect. i.e. only executing one side of the equation... The only time ive seen this sort of thing is when the compiler has crashed and is no longer compiling (without visible indication that its not) but ive restarted studio with the same results, ive cleaned the solution, built and rebuilt with no change? please show me the stupid mistake im making using vs2005 if it matters. Dim dset As DataSet = New DataSet If (CboCustomers.SelectedValue IsNot Nothing) AndAlso (CboCustomers.SelectedValue <> "") Then Dim Sql As String = "Select sal.SalesOrderNo As SalesOrder,cus.CustomerName,has.SerialNo, convert(varchar,sal.Dateofpurchase,103) as Date from [dbo].[Customer_Table] as cus " & _ " inner join [dbo].[Hasp_table] as has on has.CustomerID=cus.CustomerTag " & _ " inner join [dbo].[salesorder_table] as sal On sal.Hasp_ID =has.Hasp_ID Where cus.CustomerTag = '" & CboCustomers.SelectedValue.ToString & "'" Dim dap As SqlDataAdapter = New SqlDataAdapter(Sql, FormConnection) dap.Fill(dset, "dbo.Customer_Table") DGCustomer.DataSource = dset.Tables("dbo.Customer_Table") Else Dim erm As String = "wtf" End If

  Read the article

• SQL: Join multiple tables and get a grouped sum

  - by Scienceprodigy

  I have a database with 3 tables that have related data. One table has transactions, and the other two relate to transaction categories. Basically it's financial data, so each transaction has a category (i.e. "gasoline" for a gas purchase transaction). A short version of my Transactions table looks like this- Transactions Table: ________________________________ | ID | Type | Amount | Category | --------------------------------- I also have two more tables relating a category to a categories parent. So basically, every Category entry in the Transactions Table belongs to a parent category (i.e. "gasoline" would belong to say "Automotive Expenses"). For categories, and their parent, I have two tables - Category Children: ____________________________________________ | ID | Parent Category ID | Child Category | -------------------------------------------- Category Parent: ________________________ | ID | Parent Category | ------------------------ What I'm trying to do is query the database and have it return a total spending by parent category. To get "spending" the Type of transactions must be "Debit". I tried the following statement: SELECT category_parents.parent_category, SUM(amount) AS totals FROM (transactions INNER JOIN category_children ON transactions.category = 'category_children.child_category') INNER JOIN category_parents ON category_children.parent_category_id = category_parents._id WHERE trans_type = 'Debit' GROUP BY parent_category ORDER BY totals DESC but it gives me the following exception: 12-31 13:51:21.515: ERROR/Exception on query(4403): android.database.sqlite.SQLiteException: no such column: category_children.parent_category_id: , while compiling: SELECT category_parents.parent_category, SUM(amount) AS totals FROM (transactions INNER JOIN category_children ON transactions.category='category_children.child_category') INNER JOIN category_parents ON category_children.parent_category_id=category_parents._id where trans_type='Debit' group by parent_category order by totals desc Any help is appreciated. (EXTRA CREDIT: I also need to make another statement to do spending by child category, given the parent category)

  Read the article

• LINQ Join on Dictionary<K,T> where only K is changed.

  - by Stacey

  Assuming type TModel, TKey, and TValue. In a dictionary where KeyValuePair is declared, I need to merge TKey into a separate model of KeyValuePair where TKey in the original dictionary refers to an identifier in a list of TModel that will replace the item in the Dictionary. public TModel { public Guid Id { get; set; } // ... } public Dictionary<Guid, TValue> contains the elements. TValue relates to the TModel. The serialized/stored object is like this.. public SerializedModel { public Dictionary<Guid,TValue> Items { get; set; } } So I need to construct a new model... KeyValueModel { public Dictionary<TModel, TValue> { get; set; } } KeyValueModel kvm = = (from tModels in controller.ModelRepository.List<Models.Models>() join matchingModels in storedInformation.Items on tModels.Id equals matchingModels select tModels).ToDictionary( c => c.Id, storedInformation.Items.Values ) This linq query isn't doing what I'm wanting, but I think I'm at least headed in the right direction. Can anyone assist with the query? The original object is stored as a KeyValuePair. I need to merge the Guid Keys in the Dictionary to their actual related objects in another object (List) so that the final result is KeyValuePair. And as for what the query is not doing for me... it isn't compiling or running. It just says that "Join is not valid".

  Read the article

• When to use certain optimizations such as -fwhole-program and -fprofile-generate with several shared libraries

  - by James

  Probably a simple answer; I get quite confused with the language used in the GCC documentation for some of these flags! Anyway, I have three libraries and a programme which uses all these three. I compile each of my libraries seperately with individual (potentially) different sets of warning flags. However, I compile all three libraries with the same set of optimisation flags. I then compile my main programme linking in these three libraries with its own set of warning flags and the same optimisation flags used during the libraries' compilation. 1) Do I have to compile the libraries with optimisation flags present or can I just use these flags when compiling the final programme and linking to the libraries? If the latter, will it then optimise all or just some (presumably that which is called) of the code in these libraries? 2) I would like to use -fwhole-program -flto -fuse-linker-plugin and the linker plugin gold. At which stage do I compile with these on ... just the final compilation or do these flags need to be present during the compilation of the libraries? 3) Pretty much the same as 2) however with, -fprofile-generate -fprofile-arcs and -fprofile-use. I understand one first runs a programme with generate, and then with use. However, do I have to compile each of the libraries with generate/use etc. or just the final programme? And if it is just the last programme, when I then compeil with -fprofile-use will it also optimise the libraries functionality? Many thanks, James

  Read the article

• Help with Assembly/SSE Multiplication

  - by Brett

  I've been trying to figure out how to gain some improvement in my code at a very crucial couple lines: float x = a*b; float y = c*d; float z = e*f; float w = g*h; all a, b, c... are floats. I decided to look into using SSE, but can't seem to find any improvement, in fact it turns out to be twice as slow. My SSE code is: Vector4 abcd, efgh, result; abcd = [float a, float b, float c, float d]; efgh = [float e, float f, float g, float h]; _asm { movups xmm1, abcd movups xmm2, efgh mulps xmm1, xmm2 movups result, xmm1 } I also attempted using standard inline assembly, but it doesn't appear that I can pack the register with the four floating points like I can with SSE. Any comments, or help would be greatly appreciated, I mainly need to understand why my calculations using SSE are slower than the serial C++ code? I'm compiling in Visual Studio 2005, on a Windows XP, using a Pentium 4 with HT if that provides any additional information to assit. Thanks in advance!

  Read the article

• How to include external classes in a GAE deployment?

  - by kodra

  I am using the Google plug-in for Eclipse and have the following problem: The project consists of a GWT based GUI talking to a server running on GAE and using JPA. Additionally there is a project to migrate the legacy data to the new datastore. Since these both project use common data model, I have extracted a set of interfaces and enums into a separate project and set the other two projects dependencies on it. The Java App project seems to work, but the GWT/GAE only works if I manually copy the classes into the WEB-INF/classes directory. Obviously this is only working when using the housted mode. Anybody knows how to configure such a multi project setup in Eclipse? Also, I am not sure if the multi project layout is the best solution. The set of common model objects is used in all 3 areas: user client (GWT project compiling standard folders client and shared) server side (providing services for GWT-RPC, uploading and different feeds) migration application (posting the legacy data to the upload servlet) What are the architectural options to keep the amount of duplicated classes on minimum?

  Read the article

• VS 2008 C++ build output?

  - by STingRaySC

  Why when I watch the build output from a VC++ project in VS do I see: 1Compiling... 1a.cpp 1b.cpp 1c.cpp 1d.cpp 1e.cpp [etc...] 1Generating code... 1x.cpp 1y.cpp [etc...] The output looks as though several compilation units are being handled before any code is generated. Is this really going on? I'm trying to improve build times, and by using pre-compiled headers, I've gotten great speedups for each ".cpp" file, but there is a relatively long pause during the "Generating Code..." message. I do not have "Whole Program Optimization" nor "Link Time Code Generation" turned on. If this is the case, then why? Why doesn't VC++ compile each ".cpp" individually (which would include the code generation phase)? If this isn't just an illusion of the output, is there cross-compilation-unit optimization potentially going on here? There don't appear to be any compiler options to control that behavior (I know about WPO and LTCG, as mentioned above). EDIT: The build log just shows the ".obj" files in the output directory, one per line. There is no indication of "Compiling..." vs. "Generating code..." steps. EDIT: I have confirmed that this behavior has nothing to do with the "maximum number of parallel project builds" setting in Tools - Options - Projects and Solutions - Build and Run. Nor is it related to the MSBuild project build output verbosity setting. Indeed if I cancel the build before the "Generating code..." step, the ".obj" files will not exist for the most recent set of "compiled" files. E.g., if I cancel the build during "c.cpp" above, I will see only "a.obj" and "b.obj".

  Read the article

• How to include all objects of an archive in a shared object?

  - by Didier Trosset

  When compiling our project, we create several archives (static libraries), say liby.a and libz.a that each contains an object file defining a function y_function() and z_function(). Then, these archives are joined in a shared object, say libyz.so, that is one of our main distributable target. g++ -fPIC -c -o y.o y.cpp ar cr liby.a y.o g++ -fPIC -c -o z.o z.cpp ar cr libz.a z.o g++ -shared -L. -ly -lz -o libyz.so When using this shared object into the example program, say x.c, the link fails because of an undefined references to functions y_function() and z_function(). g++ x.o -L. -lyz -o xyz It works however when I link the final executable directly with the archives (static libraries). g++ x.o -L. -ly -lz -o xyz My guess is that the object files contained in the archives are not linked into the shared library because they are not used in it. How to force inclusion? Edit: Inclusion can be forced using --whole-archive ld option. But if results in compilation errors: g++ -shared '-Wl,--whole-archive' -L. -ly -lz -o libyz.so /usr/lib/libc_nonshared.a(elf-init.oS): In function `__libc_csu_init': (.text+0x1d): undefined reference to `__init_array_end' /usr/bin/ld: /usr/lib/libc_nonshared.a(elf-init.oS): relocation R_X86_64_PC32 against undefined hidden symbol `__init_array_end' can not be used when making a shared object /usr/bin/ld: final link failed: Bad value Any idea where this comes from?

  Read the article

• steps to fix a project that won't compile

  - by eco_bach

  Hi Pulling my hair out in trying to get a simple window based project to compile. I am running both 3.2.2 and 3.2.3 versions of Xcode. The latter is set up in a separate folder. Originally I used the latter to create and compile my project against the new 4.0 sdk. It compiled fine. Then I made the mistake of deleting some sdks I thought I no longer needed. Ever since I can no longer compile. Right now I get a dozen or so errors similar to the following "_OBJC_CLASS_$_CATransition", referenced from: objc-class-ref-to-CATransition in ViewTransitionsAppDelegate.o My active executable is the iphone simulator 4 and Base SDK is iPhone device 3.0. I tried reinstalling the xcode3.2.3 installer, no difference. I'm totally stymied, as my project WAS working and compiling fine, both to the simulator and external device. Are there any best practices or recommended steps in fixing or rebuilding a project when it won't compile? Any help welcome!

  Read the article

• Accessing Members of Containing Objects from Contained Objects.

  - by Bunkai.Satori

  If I have several levels of object containment (one object defines and instantiates another object which define and instantiate another object..), is it possible to get access to upper, containing - object variables and functions, please? Example: class CObjectOne { public: CObjectOne::CObjectOne() { Create(); }; void Create(); std::vector<ObjectTwo>vObejctsTwo; int nVariableOne; } bool CObjectOne::Create() { CObjectTwo ObjectTwo(this); vObjectsTwo.push_back(ObjectTwo); } class CObjectTwo { public: CObjectTwo::CObjectTwo(CObjectOne* pObject) { pObjectOne = pObject; Create(); }; void Create(); CObjectOne* GetObjectOne(){return pObjectOne;}; std::vector<CObjectTrhee>vObjectsTrhee; CObjectOne* pObjectOne; int nVariableTwo; } bool CObjectTwo::Create() { CObjectThree ObjectThree(this); vObjectsThree.push_back(ObjectThree); } class CObjectThree { public: CObjectThree::CObjectThree(CObjectTwo* pObject) { pObjectTwo = pObject; Create(); }; void Create(); CObjectTwo* GetObjectTwo(){return pObjectTwo;}; std::vector<CObjectsFour>vObjectsFour; CObjectTwo* pObjectTwo; int nVariableThree; } bool CObjectThree::Create() { CObjectFour ObjectFour(this); vObjectsFour.push_back(ObjectFour); } main() { CObjectOne myObject1; } Say, that from within CObjectThree I need to access nVariableOne in CObjectOne. I would like to do it as follows: int nValue = vObjectThree[index].GetObjectTwo()->GetObjectOne()->nVariable1; However, after compiling and running my application, I get Memory Access Violation error. What is wrong with the code above(it is example, and might contain spelling mistakes)? Do I have to create the objects dynamically instead of statically? Is there any other way how to achieve variables stored in containing objects from withing contained objects?

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >