Search Results

Search found 18132 results on 726 pages for 'connection timeout'.

Page 65/726 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• Wired connection periodically disconnects requires ipconfig /release and /renew to reconnect

  - by Sesame

  I just got back into University and after a day of using the internet I suddenly was unable to visit other webpages even though I was still able to chat. I restarted the computer and the internet could no longer visit webpages at all. I got a DNS error from the browser (chrome) and the troubleshooter. The connection comes up as "Network 3" even though It was "Network 2" when it worked. I compared ipconfig /all logs and they seemed identical when it was and was not working. I've found two ways to get internet connection (they no longer work): run ipconfig /release and ipconfig /renew several times set a random address and have the troubleshooter fix the new found dhcp problem (before it says dns cannot fix). I checked and it said DHCP was enabled. But either step one or two usually needs to be repeated several times before the network will change back to "network 2" from the defunct "network 3" and after an hour or so I have problems again. I've tried: Uninstalling windows defender and turning off firewall (windows firewall). Updating Qualcomm Ethernet driver - it is up to date. System Restore (problem resurfaces quickly...it's possible this has something to do with windows update?) Flushing dns and setting dns myself (google one and others). Booting in safe mode with networking...didn't fix anything Reinstalling Ethernet Driver Using other ethernet cable, other wall port. I'm out of ideas. Ipconfig /all: Windows IP Configuration Host Name . . . . . . . . . . . . : NGoller Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : Home Ethernet adapter UConnect: Connection-specific DNS Suffix . : Home Description . . . . . . . . . . . : Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller Physical Address. . . . . . . . . : 90-2B-34-50-33-F4 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : fd00::2086:628:f0a1:73c3(Preferred) Temporary IPv6 Address. . . . . . : fd00::c86b:370:b1d9:bd73(Preferred) Link-local IPv6 Address . . . . . : fe80::2086:628:f0a1:73c3%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.33(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Wednesday, August 28, 2013 11:58:37 PM Lease Expires . . . . . . . . . . : Thursday, August 29, 2013 11:58:37 PM Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter isatap.Home: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Home Description . . . . . . . . . . . : Microsoft ISATAP Adapter Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes I'm getting these errors commonly: The IP address lease 155.97.227.199 for the Network Card with network address 0x902B345033F4 has been denied by the DHCP server 10.0.1.1 (The DHCP Server sent a DHCPNACK message). Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. By the way, Operating System: Windows 7 - 64 Bit. Have downloaded latest windows updates. Update: And my two fixes don't work any more :( . This is now what happens when I try to Ipconfig /renew: C:\Users\Nikko\Desktop>ipconfig /renew Windows IP Configuration An error occurred while renewing interface Local Area Connection : The name spec ified in the network control block (NCB) is in use on a remote adapter. The NCB is the data. An error occurred while releasing interface Loopback Pseudo-Interface 1 : The sy stem cannot find the file specified. Update 2: So my internet is randomly working again today. The IP address I had before was a local one while the university address should start with 155... I didn't do anything to the settings...it's bizarre that it all of a sudden works. Thanks!

  Read the article

• Android GPS timeout

  - by Scott Saunders

  I'm writing an Android application that, among other things, needs to send the current GPS coordinates to a server when the user tells it to. From a context menu, I run the service below. The service is a LocationListener and requests updates from the LocationManager. When it gets a location (onLocationChanged()), it removes itself as a listener and sends the coordinates off to the server. All of this is working. However, if GPS coordinates are not quickly available, my service just keeps running until it gets some. It holds up the UI with a progress dialog, which is annoying. Worse, if the user has moved since starting the service, the first GPS coordinates might be wrong and the app will send bad data to the server. I need a timeout on the service. Is there a good way to do that? I'm not very experienced with threads. I think I can run a Runnable in the onStartCommand() method that will somehow count down 30 seconds and then, if there is no GPS result yet, call my service's stop() method. Does that sound like the best way to do this? Alternatively, is it possible to tell if the GPS cannot get a fix? How would I go about doing that? Edit: To further clarify, I'm looking for the best way to "give up" on getting a Location after some amount of time. public class AddCurrentLocation extends Service implements LocationListener { Application app; LocationManager mLocManager; ProgressDialog mDialog; @Override public int onStartCommand(Intent intent, int arg0, int arg1) { app = getApplication(); // show progress dialog if (app.getScreen() != null) { mDialog = ProgressDialog.show(app.getScreen(), "", "Adding Location. Please wait...", true); } // find GPS service and start listening Criteria criteria = new Criteria(); criteria.setAccuracy(Criteria.ACCURACY_FINE); mLocManager = (LocationManager) getSystemService(Context.LOCATION_SERVICE); String bestProvider = mLocManager.getBestProvider(criteria, true); mLocManager.requestLocationUpdates(bestProvider, 2000, 0, this); return START_NOT_STICKY; } private void stop() { mLocManager.removeUpdates(this); if (mDialog != null) { mDialog.dismiss(); } stopSelf(); } @Override public void onLocationChanged(Location location) { // done with GPS stop listening mLocManager.removeUpdates(this); sendLocation(location); // method to send info to server stop(); } // other required methods and sendLocation() ... }

  Read the article

• Ubuntu 10.10 Ad-Hoc Setup (from Wireless Router, to Ubuntu Server/Desktop to Wireless Router)

  - by user60375

  Okay, so I know there are different approaches for this, but I will explain my story briefly before getting to the technical stuff. My fiancée and I are going through some financial issues (as I assume a lot of us are). We ended up having to move from our house and stay with some friends/family for 6 months, just to get ourselves caught up. (Medical bills, among other issues,etc). So this is where it gets fun. At our friends house, we are staying in the loft setup which is not near the cable modem and wireless router. I have a "hand-crafted" media center running XBMC, an Ubuntu 10.10 Server/Desktop (multi-purpose, very powerful and tons drive space), two working laptops, a between the two of us we have multiple wireless devices/phones. Now our friends Wireless router doesn't have any options for assigning IP addresses, but my router does. My current setup is: Friends Cable Modem -- Friend's Wireless Router -- Ubuntu 10.10 Server -- My Wireless Router (local-link from Friend's wireless (incoming) to sharing connection on ETH0 (outgoing)) -- to all devices. (Wireless Modem, Ubuntu Server that share's it's wireless incoming connection to the ethernet port my Wireless router share's with the rest of the devices). I setup my router to use default settings from my friend's router, using Google's DNS on my router (disabled DNS setup on Ubuntu Server), everything is assigned nicely and runs smooth. My Ubuntu server was given the address 10.42.43.1 (assuming standard from Network-Manager). (On the Ubuntu machine that shares to my wireless router; I have some server apps installed, but mainly just use Samba/NFS/Tangerine action. My problem/goal is that every device has no problem of accessing the internet from my router, the media-center has an assigned ip address, all services from all devices (ZeroConf, Avanhi, Bonjour, GIT, SSH, FTP, Apache2, etc) all work correctly except from my Ubuntu Server (which serves the wireless connection to ETH0 to another Wireless Router). The Ubuntu 10.10 Server/Desktop is not broadcasting anything (the Zeroconf Service Discovery 0.4 Gnome Applet shows the services from the Ubuntu server but no other computers can see them). I can access it from my Media-Center (Running Xbuntu 10.04) if I direct it to 10.42.43.1, no problem. But I cannot access Tangerine (Daapd) and the Samba shares do not show up on any computers for 10.42.43.1 (not in the WORKGROUP which Samba is setup simple and default but I can direct computers to that address and the shares will add except on a damn Windows 7 parition). Is this an issue with how I have my router setup and possible the gateway? An issue with Network-Manager? And issue with my Ubuntu Server/Desktop? I know there is a lot to that, but it's simpler than I probably have explained? Any help would be appreciated. If you need more details, I can provide them. If there is a better way of my attempting this home-network, please let me know. Thanks in advance for the help.

  Read the article

• Troubleshooting occasional timeout of select() in windows

  - by JonF

  I'm having an occasional problem with select() timing out on me. I have it set for twenty seconds. The system will handle 100's of transactions correctly, but occasionally one fails with the selet timing out. It does about 1 transaction every few seconds, opening and closing the tcp conncetion with each transaction. I thought the server my app was connecting to might have to many connection attempts pending, but no 4226 events are showing up in the logs One more point thing I noticed when using wireshark that I'm getting a SYN,RST in response to the SYN I am appearently sending. This only happens a few times over the first second or two, then I don't see any more activity in Wireshark

  Read the article

• Using CURL within a loop to download a file, 1st one works, 2nd one times out

  - by kitenski

  Morning all, I am using CURL to download an image file within a loop. The first time it runs fine and I see the image appear in the directory. The second time it fails with a timeout, despite it being a valid URL. Can anyone suggest why it always fails on the 2nd time and how to fix it? The snippet of code is: // download image $extension = "gif"; $ch = curl_init(); curl_setopt($ch, CURLOPT_TIMEOUT, 90); curl_setopt($ch, CURLOPT_URL, $imgurl); curl_setopt($ch, CURLOPT_RETURNTRANSFER, true); curl_setopt($ch, CURLOPT_FOLLOWLOCATION, true); echo $imgurl . " attempting to open URL "; $i = curl_exec($ch); if ( $i==false ) { echo curl_errno($ch).' '.curl_error($ch); } $image_name=time().'.'.$extension; $f = fopen('/fulldirectorypath/' . $image_name ,'w+'); fwrite($f,$i); fclose($f); I have put an echo in there to display the $IMGURL, to check it is valid, and upped the timeout to 90 secs, but it still fails. This is what I see on screen: http://images.eu-xmedia.de/thumbnails/34555861/5676051/pt=pic,lang=2,origfile=yes/image.gif attempting to open URL 28 Operation timed out after 90 seconds with 0 bytes received an empty file is created in my directory. thanks alot, Greg

  Read the article

• Python's asyncore to periodically send data using a variable timeout. Is there a better way?

  - by Nick Sonneveld

  I wanted to write a server that a client could connect to and receive periodic updates without having to poll. The problem I have experienced with asyncore is that if you do not return true when dispatcher.writable() is called, you have to wait until after the asyncore.loop has timed out (default is 30s). The two ways I have tried to work around this is 1) reduce timeout to a low value or 2) query connections for when they will next update and generate an adequate timeout value. However if you refer to 'Select Law' in 'man 2 select_tut', it states, "You should always try to use select() without a timeout." Is there a better way to do this? Twisted maybe? I wanted to try and avoid extra threads. I'll include the variable timeout example here: #!/usr/bin/python import time import socket import asyncore # in seconds UPDATE_PERIOD = 4.0 class Channel(asyncore.dispatcher): def __init__(self, sock, sck_map): asyncore.dispatcher.__init__(self, sock=sock, map=sck_map) self.last_update = 0.0 # should update immediately self.send_buf = '' self.recv_buf = '' def writable(self): return len(self.send_buf) > 0 def handle_write(self): nbytes = self.send(self.send_buf) self.send_buf = self.send_buf[nbytes:] def handle_read(self): print 'read' print 'recv:', self.recv(4096) def handle_close(self): print 'close' self.close() # added for variable timeout def update(self): if time.time() >= self.next_update(): self.send_buf += 'hello %f\n'%(time.time()) self.last_update = time.time() def next_update(self): return self.last_update + UPDATE_PERIOD class Server(asyncore.dispatcher): def __init__(self, port, sck_map): asyncore.dispatcher.__init__(self, map=sck_map) self.port = port self.sck_map = sck_map self.create_socket(socket.AF_INET, socket.SOCK_STREAM) self.bind( ("", port)) self.listen(16) print "listening on port", self.port def handle_accept(self): (conn, addr) = self.accept() Channel(sock=conn, sck_map=self.sck_map) # added for variable timeout def update(self): pass def next_update(self): return None sck_map = {} server = Server(9090, sck_map) while True: next_update = time.time() + 30.0 for c in sck_map.values(): c.update() # <-- fill write buffers n = c.next_update() #print 'n:',n if n is not None: next_update = min(next_update, n) _timeout = max(0.1, next_update - time.time()) asyncore.loop(timeout=_timeout, count=1, map=sck_map)

  Read the article

• How to cancel a jquery.load()?

  - by Dirk Jönsson

  I'd like to cancel a .load() operation, when the load() does not return in 5 seconds. If it's so I show an error message like 'sorry, no picture loaded'. What I have is... ...the timeout handling: jQuery.fn.idle = function(time, postFunction){ var i = $(this); i.queue(function(){ setTimeout(function(){ i.dequeue(); postFunction(); }, time); }); return $(this); }; ... initializing of the error message timeout: var hasImage = false; $('#errorMessage') .idle(5000, function() { if(!hasImage) { // 1. cancel .load() // 2. show error message } }); ... the image loading: $('#myImage') .attr('src', '/url/anypath/image.png') .load(function(){ hasImage = true; // do something... }); The only thing I could not figure out is how to cancel the running load() (if it's possible). Please help. Thanks! Edit: Another way: How do I prevent the .load() method to call it's callback function when it's returning?

  Read the article

• Database.ExecuteNonQuery does not return

  - by dan-waterbly

  I have a very odd issue. When I execute a specific database stored procedure from C# using SqlCommand.ExecuteNonQuery, my stored procedure is never executed. Furthermore, SQL Profiler does not register the command at all. I do not receive a command timeout, and no exeception is thrown. The weirdest thing is that this code has worked fine over 1,200,000 times, but for this one particular file I am inserting into the database, it just hangs forever. When I kill the application, I receive this error in the event log of the database server: "A fatal error occurued while reading the input stream from the network. The session will be terminated (input error: 64, output error: 0). Which makes me think that the database server is receiving the command, though SQL Profiler says otherwise. I know that the appropiate permissions are set, and that the connection string is right as this piece of code and stored procedure works fine with other files. Below is the code that calls the stored procedure, it may be important to note that the file I am trying to insert is 33.5MB, but I have added more than 10,000 files larger than 500MB, so I do not think the size is the issue: using (SqlConnection sqlconn = new SqlConnection(ConfigurationManager.ConnectionStrings["TheDatabase"].ConnectionString)) using (SqlCommand command = sqlconn.CreateCommand()) { command.CommandText = "Add_File"; command.CommandType = CommandType.StoredProcedure; command.CommandTimeout = 30 //should timeout in 30 seconds, but doesn't... command.Parameters.AddWithValue("@ID", ID).SqlDbType = SqlDbType.BigInt; command.Parameters.AddWithValue("@BinaryData", byteArr).SqlDbType = SqlDbType.VarBinary; command.Parameters.AddWithValue("@FileName", fileName).SqlDbType = SqlDbType.VarChar; sqlconn.Open(); command.ExecuteNonQuery(); } There is no firewall between the server making the call and the database server, and the windows firewalls have been disabled to troubleshoot this issue.

  Read the article

• Sd card bigger than 2gb is not recognized in ubuntu 12.04

  - by dex1

  When I insert a card up to 2gb it is immediately seen by the system but if try it with bigger one it's not seen. I presume the issue is not due to the card reader itself as it reads all cards under windows 7 but due to linux driver. I could see some people having similar issues but no solution. Any help appreciated. GParted doesnt see cards bigger than 2gb. After insertion small card ubuntu@ubuntu:~$ dmesg [10169.384481] mmc0: new SD card at address a95c [10169.384870] mmcblk0: mmc0:a95c SD016 14.0 MiB [10169.386715] mmcblk0: p1 everything worked fine then I removed the small one and put 8gb, waited for 2min [10295.736422] mmc0: card a95c removed [10362.448383] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10372.480076] mmc0: Timeout waiting for hardware interrupt. [10382.496146] mmc0: Timeout waiting for hardware interrupt. [10392.512149] mmc0: Timeout waiting for hardware interrupt. [10402.528145] mmc0: Timeout waiting for hardware interrupt. [10402.529267] mmc0: error -110 whilst initialising SD card [10402.748807] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10412.768063] mmc0: Timeout waiting for hardware interrupt. [10422.784051] mmc0: Timeout waiting for hardware interrupt. [10432.800076] mmc0: Timeout waiting for hardware interrupt. [10442.816067] mmc0: Timeout waiting for hardware interrupt. [10442.817165] mmc0: error -110 whilst initialising SD card [10443.040805] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10453.056145] mmc0: Timeout waiting for hardware interrupt. [10463.072139] mmc0: Timeout waiting for hardware interrupt. [10473.088050] mmc0: Timeout waiting for hardware interrupt. [10483.104046] mmc0: Timeout waiting for hardware interrupt. [10483.104107] mmc0: error -110 whilst initialising SD card [10483.328960] sdhci: Switching to 1.8V signalling voltage failed, retrying with S18R set to 0 [10493.344144] mmc0: Timeout waiting for hardware interrupt. ubuntu@ubuntu:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 03) 00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) 07:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8072 PCI-E Gigabit Ethernet Controller (rev 16) 0a:01.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 0a:01.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 02) 0a:01.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) Same cards, same machine (same reader) only different OS(win7) work flawlessly. Some interesting reading I came across but is Chinese for me http://www.mail-archive.com/[email protected]/msg14598.html and another bit http://article.gmane.org/gmane.linux.kernel.mmc/11973/match=sd+card+not+recognized

  Read the article

• Windows 7 - Local Area Connection Adapter is disabled

  - by teepusink

  Hi, I just got a Windows 7. However, I'm now unable to connect to the internet. Doing the diagnosis gives me these: 1. There might be a problem with the driver for the Local Area Connection Adapter 2. The Local Area Connection 2 Adapter is disabled How do I resolve those? These are what I've tried: 1. in cmd do ipconfig /renew 2. in device manager, go to network adapter. (I don't see any red exclamation marks) Thanks, Tee

  Read the article

• AWS RDS (SQL Server): SSL Connection - The target principal name is incorrect

  - by AX1

  I have a Amazon Web Services (AWS) Relational Database Service (RDS) instance running SQL Server 2012 Express. I've installed Amazon's aws.amazon.com/rds certificate in the client machine's Trusted Root Certification Authorities store. However, when I connect to the RDS instance (using SQL Server Management Studio 2012) and check off "Encrypt Connection", I get the following error: A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The target principal name is incorrect.) (Microsoft SQL Server) What does this mean, and how can I fix it? Thanks!

  Read the article

• Wireless not working on XP (with Intel® PRO/Wireless 2200BG Network Connection card and Zyxel router

  - by JohnIdol

  Hi all, I just got a new router, cant' get my old xp laptop (Toshiba Satellite) to connect to it, no matter if it's WPA-PSK or WEP (I was kind of thinking with WEP it would've worked but it doesn't). When I go connect and put in credentials the dialog stays up for a few minutes then disappears with no message and no connection is established. Here's the spec of router and wireless card: Wilreless card: Intel® PRO/Wireless 2200BG Network Connection Router: Zyxel P-660-HW-T1 v3 Everything works fine on my Vista machine (for once). Any help appreciated!

  Read the article

• Installing gitosis and closed port?

  - by Nicolas GUILLAUME

  I'm trying to install gitosis on a Server (hosted by OVH and running Ubuntu server 11.04). I've done it a few times and never had any problems. But this time I have something very wired when I simply try to clone gitosis. [root@ovks-1:~/]#git clone git://eagain.net/gitosis.git Cloning into gitosis... eagain.net[0: 208.78.102.120]: errno=Connection refused fatal: unable to connect a socket (Connection refused) zsh: exit 128 git clone git://eagain.net/gitosis.git Based on my searches it looks like the port 9418 is closed. But I don't understand, a server by definition shouldn't have any closed port and I can't find a way to see if they are. So how can I check is a port is open and how can I open it if closed? Thank you for your help. Requested by WesleyDavid: iptables -L result [root@odeoos-vks-1:~/]#iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I have no idea what it means... Thanks :)

  Read the article

• FTP connection is aborted

  - by Conrad C

  I want to connect using FTP to my webpage hosted on ipages.com , but I always get this error on filezilla.: Status: Server does not support non-ASCII characters. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 550 PWD: Permission denied Error: Failed to retrieve directory listing Error: Disconnected from server: ECONNABORTED - Connection aborted It looks like the connection is established but then disconnects. Is it an issue with the host? I use the default port 21. The user-pass is working. And the ftp adress is ftp.mysite.com I tested the port 21 using netstat and I get 220 Ipage FTP Server Ready

  Read the article

• Ad-hoc connection between iPhone and Macbook Pro

  - by Phil Nash

  I sometimes find it useful to connect my iPhone to my Macbook Pro by creating an ad-hoc wireless network from the MBP and connecting to that from the iPhone. However, what I find is that sometimes this works and sometimes it doesn't. When it's not working the symptoms are usually that I see the ad-hoc SSID in the list of available networks on the iPhone, can connect to it from there (including entering my WEP key), and it shows up as the wifi network in use. However I don't get the wifi symbol in the taskbar (it remains as 3G) and attempting to use the connection (e.g. trying to connect to iTunes or Keynote using their respective Remote apps) fails saying that there is so wifi connection. I've tried rebooting both the iPhone and the MBP, recreating networks with different SSIDs and tried different channels - all to no avail! I'm especially puzzled that (a) sometimes it works just fine first time and (b) the Settings app seems to think its all connected fine. Is there anything else I should be trying?

  Read the article

• Automatically repair network connection when it goes down.

  - by Spines

  Every hour or so my wireless router goes down, and everyone connected loses internet for a couple minutes. If I right click on my network connection and choose repair, I usually get internet back quicker. Is there a way I can automatically have it try to repair the connection once it goes down? Can I write a program to do this if there isn't a built in windows setting? BTW I'm using Windows XP. EDIT:My router is a Linksys WRT110 with Firmware Version: 1.0.04, and I have cable internet. The signal is 100%. I live in an apartment complex and there are about 15 other wifi networks visible to me, not sure if that has any effect.

  Read the article

• VPN - Remote Desktop Connection

  - by alex

  I've set up a VPN connection to my work network on my home PC - running Windows 7 It connects fine. Once connected, I can ping machines that are on my work network using my home pc, however, if I try to RDP to them, it doesn't connect... It seems to initially connect, It asks me for the logon user / password, and when I set them, and click OK, it gets stuck on a screen saying: "Securing Remote Connection" Eventually it pops up saying "This computer can't connect to the remote computer. Try connecting again. If the problem persists, contact the owner of the remote computer or your network administrator" I know this computer is configured to allow remote connections etc... (and I've tried it with several different machines on the remote network) Any ideas what i've set wrong?

  Read the article

• How to use connectify to share files between 2 laptops, one running Windows 7?

  - by p2pnode

  I have 2 laptops one running XP and another Windows 7. Both have WiFi-card installed. I want to be able to share files between these 2 machines and then in next step also be able to share internet connection. I have heard that Connectify on Windows 7 is a very handy and easy tool to set up a hotspot and other machines even XP,Vista can connect to this host hotspot and share files and internet connection. I am able to search for the network (set on host) on my client machine. But how to share files? I don't see any such menu or anything. Also after I have installed connectify on Windows 7, I am not able to connect to internet using data card. It throws error that "Error 31:A A device attached to the system is not functioning". And on client machine, if I connect to data card, as well as connect to wireless network setup by host machine, I no longer am able to access internet, even though the data card is connected. The browser throws error: Please help. Any other utility similar to connectify etc?

  Read the article

• Forwarding MySQL connection with iptables and differents network interfaces

  - by Emilio Nicolás

  I have a PC with Ubuntu as a router. It has a 3G connection with a public IP to the Internet, and there is a private wireless subnet. So it has two active interfaces: ppp0: public IP (WAN) wlan0: private IP (LAN) With iptables I wannt to forward every MySQL connection (port 3306) to a local machine (10.42.43.10) of the subnet. I type these iptables commands: iptables -A PREROUTING -t nat -i ppp0 -p tcp --dport 3306 -j DNAT --to 10.42.43.10:3306 iptables -A FORWARD -p tcp -i ppp0 -o wlan0 -d 10.42.43.10 --dport 3306 -j ACCEPT But it doesn't work. telnet publicip 3306 fails :-( Any help will be appreciated. Thanks!

  Read the article

• Linux: Simulate Serial Connection from Arduino

  - by shanet

  I'm trying to simulate the serial connection from an Arduino into a Processing applet since I don't have an Arduino at the moment. Simply, I'm trying to just send bytes from Bash to a serial connection (on /dev/ttyS0) which the Processing applet will pick up like it would from an Arduino. I tried the answer to this question: How can I send data to the serial port from a Linux shell?, but it's simply not working and I don't know how to go about debugging something like this since I've never played with serial connections before. Any advice? Thanks much.

  Read the article

• Can't connect to Sql Server 2008 named instance

  - by eidylon

  I just installed Sql 2008 Express on a new server running Windows Server 2008. I know Sql is working properly, because I can connect to the db fine locally, on the server. I cannot connect to it from a client machine though, neither by IP address nor by machine name (iporname\instance). I know I have the correct IP address, because I am RDCing into the server to perform all this configuration and setup, and if I ping the server name, it is resolving to the correct IP address as well. On the server, I have set up an inbound firewall exception allowing all traffic on any port on any protocol to sqlservr.exe. In SSMS, in server > Properties > Connections Allow remote connections to this server is enabled. In Sql Server Configuration Manager, TCP/IP is enabled in both the Protocols for <instance> and the Client Protocols sections. I looked in the Windows logs, but don't see anything about connections being denied or dropped. As far as I can see, I have everything set right, but cannot connect from a client machine. The client CAN connect to other Sql 2008 Express servers okay, so I know the client configuration is correct. Any ideas where else I can look for info of what/where/how this connection is dropping, greatly apprecaited! The error being returned by the client is: **TITLE: Connect to Server** Cannot connect to [MY.IP.ADD.RSS]\[MYINSTNAME]. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)

  Read the article

• OS X SMB Connection to Windows Server 2008 R2

  - by Tawm

  I support many Macs that connect to an SMB share on a Windows Server 2008 R2 box. Occasionally I find that the Mac will try to connect and fail. The connection process will skip asking for credentials and there are none stored in keychain's password section. The server logs will show that the user tried to authenticate with invalid credentials. There are also no lingering connections from the server's point of view. The work around that I've found is to use an invalid username or a username that isn't the user's in the connection string for SMB so smb://domain;user@server/share instead of 'smb://server/share' this will force it to use the username I specified which the client doesn't have anything stored for. So it will then pop up the login window where the user changes the username to the correct one and user her password to connect happily. Specific computer in question: 15" MBP running Snow Leopard (10.6.7 or 10.6.8)

  Read the article

• How share internet connection between two laptops

  - by danielgratzz

  I have what appears to be a cable modem plugged into the wall with only ONE ethernet port on it. Therefore i can only connect one computer to it. Also, it has no wireless capability. I have to dialup the connection and enter a username and password on my laptop. But how can i share this internet connection between two laptops running windows 7 ultimate? I have spare ethernet cables if that would help... Please help, thank You.

  Read the article

• More than 3 seconds "Initial Connection" time (webpagetest.org)

  - by George Tasioulis

  I'm having a weird issue with a vBulletin forum, on a 2? Xeon E5645 w/ 16GB RAM, cPanel and LiteSpeed webserver; It takes too long to start loading... When I tested it with webpagetest.org I saw that for every request there's a 3 second "Initial connection" delay, which I don't know why is happening. Here's a screenshot: CPU Load is between 0.03 and 0.05, I've got several GB of free RAM, practical no I/O activity, and this delay can occur even with only one visitor on the forum. Where do you suggest I start searching? What could be the reason for this kind of delay? I don't think it's the webserver, or the forum because there's another website on the server (total 2 sites) which is WordPress based, and has exactly the same issue with the 3 second initial connection delay. I believe it's OS related, but need a clue on where to start looking. Thanks in advance :)

  Read the article

• Dial PPPoE connection on Windows startup

  - by alex

  Is there a way to automatically dial a PPPoE connection on startup? In Mac OS X, this is done automatically after login. It was also possible in Windows XP: when creating a new connection, it also created a shortcut to it on the desktop. Adding it to the startup folder and setting it to not prompt for credentials solved the problem. But in Vista and Windows 7, there are no shortcuts to the newly created connections, so I can't do the same thing here. Is there any other way to do this?

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >