Search Results

Search found 6288 results on 252 pages for 'credit card'.

Page 65/252 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

  • How can I troubleshoot a "Hardware Malfunction" blue screen?

    - by AaronSieb
    My computer has suddenly started crashing to a blue screen with the following text: hardware malfunction call your hardware vendor for support *the system has halted* The crash occurs randomly during normal use. I have thus far always been able to reproduce it by transferring the contents of a large folder... But I'm not sure if this is caused by the file transfer, or simply because the transfer takes long enough for something else to trigger it. A bit about my hardware I have an dual core Intel CPU, and Asus motherboard. Video card is by nVidia, and connects via PCIe. My hard drives are in pairs, and connect via SATA to a RAID controller on the motherboard. They are configured to use a RAID0 configuration. What I've tried so far There is nothing in the Windows Event Log. WhoCrashed was unable to find any crash records. ScanDisk runs to completion (it launches prior to Windows load) and reports no errors. MemTest reports no errors (to 200% coverage). System temperatures are in the range of 40 to 50 degrees Celsius, with video card temperatures in the range of 60 to eighty degrees Celsius. I have stripped the system down to a minimal configuration (hard drive, video card, one memory module, motherboard, CPU, power supply). The problem still occurrs. However, this has allowed me to rule out a few components: It is not the video card because the problem still occurred after replacing the video card another one I had on hand. It is not the hard drive or anything software related because the problem occurred after a fresh installation of Windows on a replacement hard drive. It is not the hard drive cables because I replaced those with new ones and still had the problem. It is not the power supply because the problem still occurred after replacing the power supply with another one I had on hand. It is probably not the memory because I've tried three different memory modules in three different memory slots and was still able to replicate the issue. Is there anything I can do to confirm what's causing the issue? At the moment it seems as though it must be either the motherboard or CPU, but those are both difficult components to replace... In addition, both components are relatively new (two to three years old). I will gladly edit in any additional information I can get my hands on, and/or focus the question as I can find more details...

    Read the article

  • Windows 7 boot problem (with colorful blinking smilies)

    - by Ishmael Smyrnow
    I put my computer (Windows 7) to sleep, and a couple hours later, tried to wake it back up, but the monitor wouldn't come back on. I did a hard reset (held power button), but I still couldn't get the monitor to show anything. I plugged it into my laptop, and the monitor works fine. I then swapped out the video card with an older one I have. The monitor came on and started showing the boot process. However, shortly after the Windows 7 animated logo came up, the screen went blank, it made this weird beeping noise, and I seen the strangest thing ever. Small, colorful blocks started to fill my screen, and flash, as if something was loading. Inside of those blocks, were smilies (like the ASCII character kind). This continued for about a minute, then the computer rebooted. It scared the sh!t out of me. I've never had a virus before, and I'm savvy enough to keep myself from one, but I'm wondering if that's what it was. I've been using computers for ages, and never seen anything quite like this. Has anyone ever seen something like this? I'm doing hardware diagnostics before trying to boot into Windows again. Hopefully I can figure this out, but I thought I would consult the SU community while I wait on these results. -- UPDATE -- I did a Memory Diagnostic, which turned up nothing. I also booted into Safe Mode no problem, and scheduled a disk check on both of my drives (I dual boot XP & 7). I was feeling good, and tried putting my regular video card back in, and the monitor won't display anything with it. Also, even though the monitor displays nothing, the system sounds like it's booting up. However, I hear a clicking in one of my hard drives that isn't there with the older video card. Could this be a problem with my hard drive, video card, or PSU? PSU makes sense, except for the fact I've been using the same setup for over a year, and the video card doesn't require it's own power plug thing.

    Read the article

  • iTunes and Hulu Playback Choppy and Slow?

    - by Bart Silverstrim
    Specs: Windows XP, latest updates 1.7 ghz Pentium 4 1 gig ram DirectX 9.0c NVIDIA GeForce FX 5200 with 256 meg RAM OpenGL 2.1 The story: Okay, I had an older system laying around that I figured I would try turning into a mini-media system to connect to our TV. I put together a lot of older parts, got it into working order, etc. and hooked it up and voila'...slower, but usable system that displayed to the TV. It could run some things decently. I put in iTunes, it played video okay. Not great, but okay. Played Hulu and since we have a 1Mb download rate, the minimum for their site, there were some choppy moments when watching their shows, but I found that (sadly) changing resolution to 800x600 seemed to help with the issue when running full screen. I downloaded the application called Boxee and installed it. It wouldn't run; apparently the video card in the system supported OpenGL 1.2, and needed at least 1.4. I bought a cheap card, the 5200, with four times the memory in it and support for OpenGL 2.1. Installed, everything seemed fine. iTunes seemed to run fine, the video driver (PNY video card) came with OpenGL 2.1, and Boxee finally ran. I then upgraded to the latest drivers for the video card and ran the DirectX updater from MS. After that, the OpenGL Extension Viewer wouldn't run. It just stayed as an icon in the task bar. Also, any and all videos in iTunes stuttered and went out of sync horribly. Unwatchable. I tried watching Hulu video in Boxee, and it displayed video like it was a series of stills in a very bad powerpoint. Playing straightforward audio-only came through fine, no stutters no hiccups. I tried system restore to roll back updates to pre-directX updates (I thought that seemed to be the time that triggered the weird behavior), no joy. I tried uninstalling and reinstalling the video drivers. I installed updated audio drivers (ensoniq audiopci), nothing helped. I finally wiped the drive last night and tried reinstalling everything and restoring my iTunes content via an import from a backup. Fresh install, no updater on the video card or directx. the problem was still there although I haven't tested Hulu, the iTunes player is still stuttering like crazy if I play video, fine if I play audio. I know the processor isn't high in heft, but with one gig of RAM and the fact that it seemed to do okay before I thought that the problem must be software related. Has anyone else run into this sort of issue and have a solution other than "buy a new computer"? What specs seem to work with video at the low end for you? Right now the system is of little use other than keeping my music library and iTunes apps synced with my iPod.

    Read the article

  • ¿Como puedo instalar Age of Mythology en Ubuntu? - How I can install Age of Mythology on Ubuntu?

    - by edgarsalguero93
    Spanish: Tengo un problema al tratar de instalar Age of Mythology Gold Edition (v 1.03). Al iniciarle con el Wine (1.3.28) en mi Ubuntu 11.10, y después de ingresar el serial y pulsar Siguiente, me sale un error "No se puede cargar PidGen.dll", y se regresa a la ventana anterior. En Configurar Wine, y en la pestaña Librerías le añadí el archivo DLL que me pide pero todo sigue igual. He intentado todo para que se instale pero no funciona. También he intentado instalarlo en una maquina virtual de VMware Workstation 8.0.1 con Microsoft Windows XP SP3 y me sale un error de compatibilidad con la tarjeta de vídeo: "Tarjeta de vídeo 0: vmx_fb.dll VMware SVGA II Vendor(0x15AD) Device(0x405)" y se cierra el Age of Mythology. Me parece que la solución en este caso seria aumentar la cantidad de vídeo que pone a disposición el VMware a la maquina virtual o un driver para esta tarjeta, pero no se como hacer eso. O tal vez alguien sabe la manera de que mi tarjeta de vídeo que tiene mi computadora se use también para VMware o destinar parte de la memoria del vídeo a la maquina virtual. He buscado en varios sitios, pero ninguno soluciona mi problema. Por favor, si alguien ya encontró la respuesta, que responda a esta pregunta, y de antemano gracias. English: I have a problem trying to install Age of Mythology Gold Edition (v 1.03). At the beginning of the Wine (1.3.28) on my Ubuntu 11.10, and after entering the serial and click Next, I get an error "Unable to load pidgen.dll" and return to the previous window. In Configure Wine and in the Libraries tab I added the DLL that calls me but nothing has changed. I tried everything to be installed but not working. I have also tried to install in a virtual machine with VMware Workstation 8.0.1 Microsoft Windows XP SP3 and I get a compatibility error with video card: "Video Card 0: VMware SVGA II vmx_fb.dll Vendor (0x15AD) Device (0x405) "and closes the Age of Mythology. I think the solution in this case would increase the amount of video available to the VMware virtual machine or a driver for this card, but not how to do that. Or maybe someone knows the way that my video card that has my computer is also used for VMware or earmark part of the video memory to the virtual machine. I searched several sites, but none solved my problem. Please, if someone already found the answer, to answer this question. I also apologize if the translation is not well understood. I used the Google translator. Thanks and greetings from Latin America

    Read the article

  • Cannot boot from LiveUSB: “aufs mount failed”

    - by Keyslinger
    I used Universal USB Installer to install an Ubuntu 10.04 Netbook LiveCD image on an SD Card. During this installation, I indicated that I wanted a persistent install with 4GB dedicated to customization/settings. The installation seems to finish without incident. However, when I try to boot from the SD card using my EeePC 901, Ubuntu fails to start I get the following message: (initramfs) mount: mounting aufs on /root failed: No such device. Aufs mount failed What can I do to make my installation successfully boot?

    Read the article

  • How can I troubleshoot flash player/hardware conflict?

    - by sparthikas
    OBJECTIVE: Have a web browser on my Ubuntu install that can play youtube and hulu videos. Also would like to understand problem so that I can fix it again if I change software. Workarounds welcome, technical understanding and solution preferable. SYMPTOMS: Flash does not run - cannot make the right-click menu appear, an empty box is where video should be, changes to black box when hovering over other links. The "The Adobe Flash plugin has crashed" message does not appear with its sad lego face. cannot activate proprietary graphics driver - causes system to reboot to a prompt. SOLUTIONS TRIED: Replaced OS (tried slackware 13.37, fedora 17, linuxmint 13 maya, gentoo, lubuntu, and even winXP. lubuntu confirmed to work, don't remember how much tweaking, if any, this required. Slack, fedora, mint, and gentoo all failed to run flash just like ubuntu) many reinstalls of flash player via different methods, including cleaning up old installs first, also tried gnash and lightspark. replaced graphics card (replaced HIS IceQ Radeon HD 4670 AGP with older GeForce 5700 LE no change in problem) flash does successfully work on winXP installation with Catalyst AGP hotfix driver applied, however I consider windows wholly unacceptable for web browsing due to lack of security. Lubuntu install also works, however I do not want to be tied down to just using Lubuntu on this computer. SYSINFO: Have latest versions of Ubuntu, Firefox, and Flash on fresh Ubuntu install. Using Gigabyte 7s748 motherboard with Athlon XP 2800+ and 3 GB of RAM with Radeon HD 4670 AGP card, also a Dell soundblaster live series sound card (due to malfunction of onboard sound on motherboard) Wired internet connection, Maxtor 6Y120L3 HDD, Sony DVD RW AW-Q170A, Dell M993s monitor. NOTES: I do not know if the graphics driver issue and the flash troubles are linked. Substitution of older graphics card having same flash troubles seems to suggest they aren't. My troubleshooting method is rather reductionist, consisting mainly of "replace things until you find out what was causing the error by process of elimination" only it seems that this must be a conflict which arises when software decides how to configure itself on my hardware. That is, I know the hardware can run Flash, and I know that on other systems the same software can too, but somehow the combination fails. Consequently I feel out of my depth. I will keep trying things off and on, but I have spent probably about 30 man-hours in the last 4 months working on this problem with no joy other than the lubuntu workaround. Any help will be appreciated, I will be checking back and posting updates. Any pertinent questions regarding me or my computer will be answered, outputs from config files can be accessed and posted (IDK which ones or what parts to post).

    Read the article

  • Auto-select external soundcard?

    - by dandelion
    Just got an external usb sound card because my internal speakers broke. The new sound card works just fine after plugging it in and going to System Settings Sound, and then selecting the device. However, I was curious as to whether there was a way to make ubuntu auto-select the device without having to go through System Settings. Can it just be selected upon plugging it in? Any and all help appreciated :)) (ps its running 12.04)

    Read the article

  • What are the GPU requirements for XNA 4.0?

    - by Nate Koppenhaver
    I tried to build a sample application using XNA, but I got an error saying that Pixel Shader 1.1 was required, so I got a used Radeon X300 GPU that supports Pixel Shader. I tried to build it again, but I got another error saying that "Your current graphics card does not support the XNA HiDef profile" and would not build. Since that card seems to not be compatible, I guess I need to buy another one. What features should I look for to make sure that it's compatible with XNA?

    Read the article

  • Accidentally deleted /etc/X11/xorg.conf.original, and now log in no longer works

    - by Cester Nilap
    I accidentally deleted xorg.conf.original-0; xorg.conf.fglrx xorg.conf.fglrx-0-1, after I tried to install fglrx drivers on the graphics card, which in fact worked on 13.04 and now as I went to 13.10 has not worked. Now I can just switch to a new TTY with: Ctrl + Alt + F2 I found this which is for nVidia cards TO install the fglrx drivers for graphic card I used this tutorial Is there any possibility that I can recover, replace, rebuilb that xorg.conf.original-0, and if exists any possibility where I could start from.

    Read the article

  • asus n550jv audio problem: no sound from notebook' speakers

    - by skywalker
    Ubuntu 13.10. The problem is: the internal speakers don't work. I have no problem when I'm using the headphones. There is no hardware issue since in windows 8 everything works perfectly(external subwoofer included). I'm trying to modify /etc/modprobe.d/alsa-base.conf but I can't find the correct model to put into: options snd-hda-intel model= The file HD-Audio-Models.txt doesn't contain the model for ALC668. Some info: :~sudo aplay -l **** List of PLAYBACK Hardware Devices **** card 0: MID [HDA Intel MID], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: MID [HDA Intel MID], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: MID [HDA Intel MID], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: PCH [HDA Intel PCH], device 0: ALC668 Analog [ALC668 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 :~$ sudo lspci -v | grep -A7 -i "audio" 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) Subsystem: Intel Corporation Device 2010 Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at f7a14000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Kernel driver in use: snd_hda_intel -- 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04) Subsystem: ASUSTeK Computer Inc. Device 11cd Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at f7a10000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel PS info :~$ amixer -c 0 Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',1 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',2 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] :~$ pacmd dump-volumes Welcome to PulseAudio! Use "help" for usage information. Sink 0: reference = 0: 76% 1: 76%, real = 0: 76% 1: 76%, soft = 0: 100% 1: 100%, current_hw = 0: 76% 1: 76%, save = yes Input 8: volume = 0: 100% 1: 100%, reference_ratio = 0: 100% 1: 100%, real_ratio = 0: 100% 1: 100%, soft = 0: 100% 1: 100%, volume_factor = 0: 100% 1: 100%, volume_factor_sink = 0: 100% 1: 100%, save = no Source 0: reference = 0: 100% 1: 100%, real = 0: 100% 1: 100%, soft = 0: 100% 1: 100%, current_hw = 0: 100% 1: 100%, save = no Source 1: reference = 0: 16% 1: 16%, real = 0: 16% 1: 16%, soft = 0: 100% 1: 100%, current_hw = 0: 16% 1: 16%, save = yes

    Read the article

  • How to get D-Link DWA-547 working on Ubuntu 13.10?

    - by Tan Kah Ping
    I got a D-Link DWA-547 Wifi card which is supposed to work out-of-the-box with Linux. Says so here: http://wireless.kernel.org/en/users/Drivers/ath9k/products/external While lspci does list the device, NetworkManager doesn't seem to allow me to configure Wifi. lsmod also shows that ath9k isn't loaded. Manually loading with 'modprobe ath9k' doesn't help. How do I get this card working on Ubuntu 13.10 64-bit?

    Read the article

  • Screen corruption with 946G / 82945G/GZ [closed]

    - by Ferdinandhi
    Since version 10.04 I have problems with Ubuntu (I think) my graphics card. This problem arises especially when working with graphics or CPU usage much. The problem is that it breaks the GUI as you see in the image and the entire computer is very slow. I'm running Ubuntu 11.04 and have a Intel graphics card 945G x86/MMX/SSE2. I used Unity and Gnome 3 with the same results. lspci returns 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)

    Read the article

  • blacklist VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE

    - by Thomas Labensi
    I have an hp a310n pavillion I have installed an nvidia pci geforce card I want to blacklist the VGA compa[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03)integrated graphics what do I need to do?? tom@tom-DM167A-ABA-a310n:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03) 02:09.0 VGA compatible controller: NVIDIA Corporation NV11 [GeForce2 MX/MX 400] (rev b2) tom@tom-DM167A-ABA-a310n:~$ I'm using the nvidia via neuvoux and I want to really make sure I'm using the nvidia card

    Read the article

  • Screen corruption with 946G / 82945G/GZ

    - by Ferdinandhi
    Since version 10.04 I have problems with Ubuntu (I think) my graphics card. This problem arises especially when working with graphics or CPU usage much. The problem is that it breaks1 the GUI as you see in the ![image and the entire computer is very slow: I'm running Ubuntu 11.04 and Intel graphics card 945G x86/MMX/SSE2 I used Unity and Gnome 3 with the same results. lspci--- 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)

    Read the article

  • Wireless is disabled by hardware switch on Dell Inspiron 1750

    - by lowerkey
    I have a problem where Ubuntu (12.04) says there is a wireless network card, but it is disabled by a hardware switch. How do I turn it on? I checked the BIOS, and the wireless card is enabled there. Fn + F2 was also no success. The results of rfkill list: 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes 1: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes sudo rfkill unblock wifi did nothing to the Wireless Status.

    Read the article

  • OS8- AK8- The bad news...

    - by Steve Tunstall
    Ok I told you I would give you the bad news of AK8 to go along with all the cool new stuff, so here it is. It's not that bad, really, just things you need to be aware of. First, the 2013.1 code is being called OS8, AK8 and 2013.1 by different people. I mean different people INSIDE Oracle!! It was supposed to be easy, but it never is. So for the rest of this blog entry, I'm calling it AK8. AK8 is not compatible with the 7x10 series. Ever. The 7x10 series is not supported with AK8, and if you try to upgrade one, it will fail at the healthcheck. All 7x20 series, all of them regardless of age, are supported with AK8. Drive trays. Let's talk about drive trays and SAS cards. The older drive trays for the 7x20 series were called the "Riverwalk 2" or "DS2" trays. They were technically the "J4410" series JBODs that Sun used to sell a la carte before we stopped selling JBODs. Don't get me started on that, it still makes me mad. We used these for many years, and you can still buy them right now until December 15th, 2013, when they will no longer be sold. The DS2 tray only came as a 4u, 24 drive shelf. It held 3.5" drives, and you had a choice of 2TB, 3TB, 300GB or 600GB drives. The SAS HBA in the 7x20 series was called a "Thebe" card, with a part # of 7105394. The 7420, for example, came standard with two of these "Thebe" cards for connecting to the disk trays. Two Thebe cards could handle up to 12 trays, so one would add two more cards to go to 24 trays, or have up to six Thebe cards to handle 36 trays. This card was for external SAS only. It did not connect to the internal OS drives or the Readzillas, both of which used the internal SCSI controller of the server. These Riverwalk 2 trays ARE supported with AK8. You can upgrade your older 7420 or 7320, no problem, as-is. The much older Riverwalk 1 trays or J4400 trays are NOT supported by AK8. However, they were only used by the 7x10 series, and we already said that the 7x10 series was not supported. Here's where it gets tricky. Since last January, we have been selling the new style disk trays. We call them the "DE2-24P" and the "DE2-24C" trays. The "C" tray is for capacity drives, which are 3.5" 3TB or 4TB drives. The "P" trays are for performance drives, which are 2.5" 300GB and 900GB drives. These trays are NOT Riverwalk 2 trays, even though the "C" series may kind of look like it. Different manufacturer and different firmware. They are not new. Like I said, we've been selling them with the 7x20 series since last January. They are the only disk trays we will be selling going forward. Of course, AK8 supports them. So what's the problem? The problem is going to be for people who have to mix drive trays. Remember, your older 7x20 series has Thebe SAS2 HBAs. These have 2 SAS ports per card.  The new ZS3-2 and ZS3-4 systems, however, have the new "Thebe2" SAS2 HBAs. These Thebe2 cards have 4 ports per card. This is very cool, as we can now do more SAS channels with less cards. Instead of needing 4 SAS cards to grow to 24 trays like we did with the old Thebe cards, I can now do 24 trays with only 2 Thebe2 cards. This means more IO slots for fun things like Infiniband and 10G. So far, so good, right? These Thebe2 cards work with any disk tray. You can even mix older DS2 trays with the newer DE2 trays in the same system, as long as you have Thebe2 cards. Ah, there's your problem. You don't have Thebe2 cards in your old 7420, do you? Well, I told you the bad news wasn't that bad, right? We can take out your Thebe cards and replace them with Thebe2. You can then plug your older DS2 trays right back in, and also now get newer DE2 trays going forward. However, it's important that the trays are on different SAS channels. You can mix them in the same system, but not on the same channel. Ask your local SC if you need help with the new cable layout. By the way, the new ZS3-2 and ZS3-4 systems also include a new IO card called "Erie" cards. These are for INTERNAL SAS to the OS drives and the Readzillas. So those are now SAS2 instead of SATA like the older models. Yes, the Erie card uses an IO slot, but that's OK, because the Thebe2 cards allow us to use less SAS HBAs to grow the system, right? That's it. Not too much bad news and really not that bad. AK8 does not support the 7x10 series, and you may need new Thebe2 cards in your older systems if you want to add on newer DE2 trays. I think we can all agree that there are worse things out there. Like our Congress.   Next up.... More good news and cool AK8 tricks. Such as virtual NICS. 

    Read the article

  • Upgrade to 11.10 caused rt2800usb module to be blacklisted

    - by Shevek
    I just upgraded from Kubuntu 11.04 to 11.10, and I noticed that after the upgrade my USB wireless card was no longer recognized. It turns out that the rt2800usb module had been added (automatically, I assume, unless previously the module had been loading despite being blacklisted) to /etc/modprobe.d/blacklist.conf. I re-enabled the wireless card by commenting out the blacklist line and adding rt2800usb to /etc/modules, but I was wondering if there was a reason for rt2800usb being added to the blacklist.

    Read the article

  • Screen blink twice every 10 seconds on ubuntu 12.04

    - by Erik
    On 12.04 64-bit, about every 5 seconds my screen blinks twice. Even during installation of Ubuntu from CD, this happens during the complete process. I had no problems with earlier Ubuntu versions (earlier version was 10.04LTS 64-bit) System specs: I7-2600K MSI 7681 Motherboard 16 GB RAM 2 x Nvidia 560 card SLI (only 1 screen on 1 card active during install process) This flickering is driving me crazy, please help.

    Read the article

  • Drivers for Sony Ericsson Phones

    - by user93671
    I'm trying to locate a driver to access my memory card inside my Sony Ericsson Walkman phone. I have 12.04 and it doesn't seem to recognize it. Ideally I would like to install the entire PC Suite that came with the phone, but I'll just settle to access the memory card so I can add music when I need too. I tried using mass storage mode, media transfer, phone mode, even print mode and still nothing.

    Read the article

  • Accidentally deleted /etc/X11/xorg.conf.original, and now login no longer works

    - by Cester Nilap
    I accidentally deleted xorg.conf.original-0; xorg.conf.fglrx xorg.conf.fglrx-0-1, after I tried to install fglrx drivers on the graphics card, which in fact worked on 13.04 and now as I went to 13.10 has not worked. Now I can just switch to a new TTY with: Ctrl + Alt + F2 I found this which is for nVidia cards TO install the fglrx drivers for graphic card I used this tutorial Is there any possibility that I can recover, replace, rebuilb that xorg.conf.original-0, and if exists any possibility where I could start from.

    Read the article

  • How to make Google SketchUp work with Intel graphics in Wine?

    - by haltman
    Hi, everybody! My pc has an Intel DH57JG mainboard, I've installed wine, launching sketchup I receive error that I don't have OpenGL installed, is there a way to configure/install it? On my previous pc with an NVidia video card installing official NVidia driver resolved it. Is there is a way to do the same with the Intel card? Running locate libgl on a terminal returns no results. thanks in advance.

    Read the article

  • Which driver should I use with a 9600 GT Mobile?

    - by lisalisa
    I checked the Additional Drivers offered for my card and I saw four options: NVIDIA accelerated graphics drivers (version 173) NVIDIA accelerated graphics drivers (post-release updates) (version 173-updates) NVIDIA accelerated graphics drivers (version current) (Recommended) NVIDIA accelerated graphics drivers (post-release updates)(version current-updates) I'm not sure which one to pick. I want a driver that's stable but also takes advantage of my card's hardware.

    Read the article

  • Nvidia problem after inappropriate shut down

    - by bhappy
    Hi, After by battery died on my laptop I started my computer after plugging it to the ac adapter, for no reason that I know I cant use the visual effects any more as if my graphic card is not installed (my graphic card is GeForce 300m and nvidia x-settings is working) I tried generating a new xorg.conf file but nothing happened I marked all the installed nvidia driver in synaptic for re installation and didn't really help I googled the problem appears to be popular but couldn't find a solid solution Any Ideas ?

    Read the article

  • How can I improve the battery life under 12.04 on my Inspiron 14z? [duplicate]

    - by cfogelberg
    This question already has an answer here: Tips to extend battery life for laptops and notebooks 24 answers How do I improve the battery life of my Inspiron 14z under Ubuntu 12.04? This laptop gets 4-5 hours of battery life using Windows (e.g. here). I've removed Windows, installed Ubuntu 12.04 and the initial battery life was only 2 hours. With some tweaks (described below) it's still only ~2.5 hours. For reference, the laptop is the latest model of the 14z: i5-3337U processor 32GB MSATA, 500GB HDD (5400rpm) AMD Radeon HD7570M graphics card I have put ext4 partitions on both the SSD and the HDD, and have mounted / to the SSD and /home to the HDD. I also put a 24gb linux swap partition at the start of the HDD, though I figure this won't be used all that much (the laptop has 8gb of RAM). After googling around and reading Ask Ubuntu and other sites extensively, I have done the following steps, and they have improved the battery life ~30 minutes (exact improvement not clear, but battery life is still nowhere near 4-5 hours). Installed Jupiter (and set Performance to "Power Saving") Installed laptop-mode-tools cat /proc/sys/vm/laptop_mode now outputs 5 (previously it output 0) But it's not clear that this will help: AskUbuntu question Turned down the brightness of my screen from full to 1/3 Other things I have heard about but have not tried for fear of frying the laptop or my linux install: Add "pcie_aspm=force" at the end of the line with "quiet splash" in /boot/grub/grub.cfg Enable ALPM, but it may already be enabled in 12.04? Enable i915 framebuffer compression Use a propietary driver for the graphics card? Turn off the graphics card? (what would happen if I relied on the internal Intel bridge?) Use TLP? Spin down the HDD more aggressively (howto, but I think laptop-mode-tools does this already) The only other thing I've noticed is that plastic just above the F5, F6 and F7 keys gets really hot. According to Jupiter my CPU temperature is only 69 celsius and the System Monitor shows CPU load at 7% so I don't think it's the CPU. Maybe it's the graphics card? Also, I've set up MongoDB and LAMP on the machine as well. When I run powertop MongoDB is high in the list, but I'm not sure if that's relevant to battery life because I'm not actually doing anything with MongoDB most of the time. Edit - Additional info as requested $ lspci -nnk | grep -iEA3 "(graphics|vga)" 00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) Subsystem: Dell Device [1028:057f] Kernel driver in use: i915 Kernel modules: i915 -- 02:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] [1002:6841] Subsystem: Dell Device [1028:057f] Kernel driver in use: radeon Kernel modules: radeon

    Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >