Search Results

Search found 2615 results on 105 pages for 'dell inspiron 1525'.

Page 65/105 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

  • windows server 2012 wont boot after instlling on iscsi device

    - by Nandan
    Windows server 2012 installed on a ISCI LUN. Problem noticed after first reboot. Windows boots only if setup DVD is present(i have to ignore "press any key to boot from DVD" prompt). to present the login Screen and everything looks great from here. But the server wont boot without the help of setup DVD. Can any one help me understand what would be the problem? Dell Workstation T3600 Intel Pro NIC (Capable of ISCI Boot and also enabled)

    Read the article

  • Why is the screen resolution different between Windows 7 Ultimate and Enterprise editions?

    - by IDispose
    I installed Windows 7 Enterprise 64 bit edition on my Dell Precision M6400 with an nVidia Quadro Fx 2700M card and I see that even though the screen resolution is set to 1920 X 1200, its not the same as the Windows 7 Ultimate 64 bit installed on a second hard drive. Both OSes show that the screen resolution is set at 1920 X 1200 but Ultimate shows more pixels than Enterprise. I also reinstalled the display driver but in vain. Any ideas? TIA

    Read the article

  • Windows update on netbook requires CD (hint, there's no CD drive)

    - by bwooceli
    An "Important" update for Microsoft Works (via Windows Update) on a Dell netbook gets about halfway through and then pops up with the super-awesome "Please insert Microsoft Works 9.0 disc" message. Of course, the netbook has no CD rom drive, there is no handy folder (that i can find) containing "Works9.msi", and I have no Works9 disc. It wouldn't be so bad, except the update keeps coming up everytime WU runs. Any suggestions?

    Read the article

  • SQL-Server 2008 on a windows vista doesn't start.

    - by Ice
    Hi, i have installed a SQL2008 Server developer-Edition on my Dell Precision M90 Notebook with windows Vista, but the service dosen't start. SQL Server Configuration Manager shows MSSQLSERVER as stopped and an attempt to start this service fails. No entry in eventviewer... where to look? What might be the reason?

    Read the article

  • Explorer freeze opening some local folder

    - by esaurito
    Hi all, Often (not always) when I open some folder (most of the times "Downloads" folder) Explorer freeze. The only thing I'm able to do is open the task manager ad kill the application that suddenly restart. I tried to: delete all files in folder (via cmd prompt) delete the folder an create a new folder with the same name This issue is driving me crazy, please help. OS: Windows XP, Laptop: Dell Latitude D620

    Read the article

  • Uuntu 9.10 will not boot

    - by Jim
    After an update yesterday my Dell X300 will only boot to a screen with an option to perform 2 memory tests. If I perform these tests, it will only go back to this same screen, offering a choice of memory test again, 86+ or 86+ serial console 115200. This screen is headed - GNU Grub version 1.97 beta 4. This is a full install on my hard drive. How can I get back to booting normally?

    Read the article

  • Is it possible to dedicate a monitor for virtualbox use?

    - by bubu
    Configuration Windows 7 Intel i7-based platform ATI Raedon HD 5850 Display card Virtualbox with ubuntu 10.10 as guest Problem I wanted to connect another monitor to my current setup (Which is a single monitor, dell U2711 monitor) so that it would be dedicated to one (or more if possible) virtual machine and for virtual machine use only. Ideally, I do not want the windows desktop to extend to that particular monitor. Thanks for any help.

    Read the article

  • Super slow Western Digial External hard drive

    - by shinokada
    I have 2TB of WD external hard drive. I use windows Vista 32x. on DELL laptop Latitude D630 and connect through USB cable. When I transfer from my C drive to external hard drive it transfer only 3KB/sec. It take 30min to transfer 6MB. It is useless at the moment. Can anyone help me how to speed up please. Thanks in advance.

    Read the article

  • Why is my mouse lagging?

    - by Boris_yo
    Don't remember this from earlier, but my mouse is lagging when I refresh specific websites in Chrome and Firefox. I can't observe such lags with Internet Explorer. Here's a video i made I tested with AIDA64 and sometimes noticed very little and short lags. Here's a second video Any thoughts? Hardware And Software Information: DELL Latitude E6420 Windows 7 64-Bit Enterprise 8GB of RAM Razer DeathAdder Black Edition mouse Firmware: 1.00 Driver version: 1.02

    Read the article

  • How do I use the webcam on my laptop?

    - by iOsBoy
    I have a Core i3 model of the dell laptop.There is a webcam placed on top of the laptop.It becomes usable automatically when I am trying to place a pic on some social media site or something.How do I use it to take pictures when I want? How do I start this camera? There is no option in my system that allows me to use this.I could'nt find any software for using this.Please help me.I have a windows 7 installed on my system.

    Read the article

  • Are there any PCI graphics cards with Windows 7 drivers?

    - by dbruning
    I have a Dell D830 laptop and am trying to add a second graphics card (to the laptop dock) to drive more monitors. It needs to be PCI (not PCI-e), and would ideally itself have dual DVI outputs (although I'll settle for DVI + VGA or even just DVI at this stage...) Needs to have real Windows 7 drivers, not just Vista drivers. Thanks!

    Read the article

  • How can I access my external hard drive wirelessly from my laptop?

    - by leora
    My desktop crashed so I am migrated over to a laptop. I have wireless in my home so i am trying to be able to use to laptop in any room without any other connections (wireless printer, wireless mouse, etc) The one issue i have is that my desktop had 2 external hard drives (USB) connected to them and i am trying to figure out the best way to treat these as external drives without having to plug them into the laptop directly. My external hard drive is the Western Digital WDH1U5000N 500GB and my laptop is a Dell D620.

    Read the article

  • ubtuntu studio 9.10 wireless does'nt work

    - by eric
    hi everyone! i just bought a brand new laptop. at first i was with windows 7 and decided to switch to ubuntu studio 9.10 on my studio dell. my ethernet card is a netlink. i do not have any connection at all to the internet, only when i plug the wire to my computer. i've tried a lot of stuff nothing work. can you help me please someone.

    Read the article

  • ABNORMAL LAPTOP RESTART

    - by KIUFELIX
    My dell vostro laptop keeps on restarting when I'm busy using it without commanding it to do so.I'm using windows 7 for O.S.What might be the problem?How can I solve it?Please someone help!

    Read the article

  • ABNORMAL LAPTOP RESTART

    - by KIUFELIX
    My dell vostro laptop keeps on restarting when I'm busy using it without commanding it to do so.I'm using windows 7 for O.S.What might be the problem?How can I solve it?Please someone help!

    Read the article

  • determining server config

    - by tristan625
    I have recently set up a Linux server for my college which also hosts the college website and other downloadables. This server is linked to outside world using a leased line connection of 1mbps capacity. My problem is that the users complain that the downloads from the server are very slow, how can I imporve this? What things should I be looking at. My current server config: Dell vostro260s with 4Gb of ram and i3 processor.

    Read the article

  • SQLAuthority News – SQL Server 2008 R2 Hosted Trial

    - by pinaldave
    This is a bit old news but for me but it will new for many of you know. SQLPASS, Dell, Microsoft and MaximumASP has come together and build hosted environment for free to all of us to use and experiment with. Register now to try out up to seven labs: SQL Server 2008 R2 – Multi Server Management SQL Server 2008 R2 – PowerPivot SQL Server 2008 R2 – Reporting Services SQL Server 2008 R2 – Master Data Services SQL Server 2008 R2 – StreamInsight SQL Server Integration Services – Introduction SQL Server Integration Services – Intermediate to Advanced Now this is indeed wonderful opportunity as you do not need to buy anything and get world class experience with this products. Register here. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology Tagged: SQL PASS

    Read the article

  • Best Practices around Oracle VM with RAC: RAC SIG webcast - Thursday, March 18th -

    - by adam.hawley
    The RAC SIG will be hosting an interesting webcast this Thursday, March 18th at 9am pacific time (5pm GMT) on: Best Practices around Oracle VM with RAC The adaptation of virtualization technology has risen tremendously and continues to grow due to the rapid change and growth rate of IT infrastructures. With this in mind, this seminar focuses on configuration best practices, examining how Oracle RAC scales & performs in a virtualized environment, and evaluating Oracle VM Server's ease of use. Roger Lopez from Dell IT will be presenting. This Week's Webcast Connection Info: ==================================== Webcast URL (use Internet Explorer): https://ouweb.webex.com/ouweb/k2/j.php?ED=134103137&UID=1106345812&RT=MiM0 Voice can either be heard via the webconference or via the following dial in: Participant Dial-In 877-671-0452 International Dial-In 706-634-9644 International Dial-In No Link http://www.intercall.com/national/oracleuniversity/gdnam.html Intercall Password 86336

    Read the article

  • Ubuntu 12.04 installation never finishes

    - by Eric Carlsson
    I am trying to install Ubuntu 12.04 on an old Dell Latitude C400 laptop previously running windows XP using an Ubuntu install CD. The OS runs fine off the CD if a bit slow, and the installation starts off fine. However once the progress bar is filled I get put back to the desktop and nothing happens, first I assumed that the installation was completed but when I restarted the computer and booted from the hard drive nothing happened. I tried to install a few more times but the same thing happens. Am I doing something wrong? I do not get a error message or a installation complete notification. Is there any way I could get some kind of debug screen or log to see if something went wrong or at least follow the installation progress in more detail. Thanks for the help.

    Read the article

  • unexplainable packet drops with 5 ethernet NICs and low traffic on Ubuntu

    - by jon
    I'm stuck on problem where my machine started to drops packets with no sign of ANY system load or high interrupt usage after an upgrade to Ubuntu 12.04. My server is a network monitoring sensor, running Ubuntu LTS 12.04, it passively collects packets from 5 interfaces doing network intrusion type stuff. Before the upgrade I managed to collect 200+GB of packets a day while writing them to disk with around 0% packet loss depending on the day with the help of CPU affinity and NIC IRQ to CPU bindings. Now I lose a great deal of packets with none of my applications running and at very low PPS rate which a modern workstation NIC would have no trouble with. Specs: x64 Xeon 4 cores 3.2 Ghz 16 GB RAM NICs: 5 Intel Pro NICs using the e1000 driver (NAPI). [1] eth0 and eth1 are integrated NICs (in the motherboard) There are 2 other PCI-X network cards, each with 2 Ethernet ports. 3 of the interfaces are running at Gigabit Ethernet, the others are not because they're attached to hubs. Specs: [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm uptime 17:36:00 up 1:43, 2 users, load average: 0.00, 0.01, 0.05 # uname -a Linux nms 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I also have the CPU governor set to performance mode and irqbalance off. The problem still occurs with them on. # lspci -t -vv -[0000:00]-+-00.0 Intel Corporation E7520 Memory Controller Hub +-02.0-[01-03]--+-00.0-[02]----0e.0 Dell PowerEdge Expandable RAID controller 4 | \-00.2-[03]-- +-04.0-[04]-- +-05.0-[05-07]--+-00.0-[06]----07.0 Intel Corporation 82541GI Gigabit Ethernet Controller | \-00.2-[07]----08.0 Intel Corporation 82541GI Gigabit Ethernet Controller +-06.0-[08-0a]--+-00.0-[09]--+-04.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | | \-04.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-00.2-[0a]--+-02.0 Digium, Inc. Wildcard TE210P/TE212P dual-span T1/E1/J1 card 3.3V | +-03.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-03.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) +-1d.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 +-1d.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 +-1d.2 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 +-1d.7 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller +-1e.0-[0b]----0d.0 Advanced Micro Devices [AMD] nee ATI RV100 QY [Radeon 7000/VE] +-1f.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge \-1f.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller I believe the NIC nor the NIC drivers are dropping the packets because ethtool reports 0 under rx_missed_errors and rx_no_buffer_count for each interface. On the old system, if it couldn't keep up this is where the drops would be. I drop packets on multiple interfaces just about every second, usually in small increments of 2-4. I tried all these sysctl values, I'm currently using the uncommented ones. # cat /etc/sysctl.conf # high net.core.netdev_max_backlog = 3000000 net.core.rmem_max = 16000000 net.core.rmem_default = 8000000 # defaults #net.core.netdev_max_backlog = 1000 #net.core.rmem_max = 131071 #net.core.rmem_default = 163480 # moderate #net.core.netdev_max_backlog = 10000 #net.core.rmem_max = 33554432 #net.core.rmem_default = 33554432 Here's an example of an interface stats report with ethtool. They are all the same, nothing is out of the ordinary ( I think ), so I'm only going to show one: ethtool -S eth2 NIC statistics: rx_packets: 7498 tx_packets: 0 rx_bytes: 2722585 tx_bytes: 0 rx_broadcast: 327 tx_broadcast: 0 rx_multicast: 1504 tx_multicast: 0 rx_errors: 0 tx_errors: 0 tx_dropped: 0 multicast: 1504 collisions: 0 rx_length_errors: 0 rx_over_errors: 0 rx_crc_errors: 0 rx_frame_errors: 0 rx_no_buffer_count: 0 rx_missed_errors: 0 tx_aborted_errors: 0 tx_carrier_errors: 0 tx_fifo_errors: 0 tx_heartbeat_errors: 0 tx_window_errors: 0 tx_abort_late_coll: 0 tx_deferred_ok: 0 tx_single_coll_ok: 0 tx_multi_coll_ok: 0 tx_timeout_count: 0 tx_restart_queue: 0 rx_long_length_errors: 0 rx_short_length_errors: 0 rx_align_errors: 0 tx_tcp_seg_good: 0 tx_tcp_seg_failed: 0 rx_flow_control_xon: 0 rx_flow_control_xoff: 0 tx_flow_control_xon: 0 tx_flow_control_xoff: 0 rx_long_byte_count: 2722585 rx_csum_offload_good: 0 rx_csum_offload_errors: 0 alloc_rx_buff_failed: 0 tx_smbus: 0 rx_smbus: 0 dropped_smbus: 01 # ifconfig eth0 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:373348 errors:16 dropped:95 overruns:0 frame:16 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:356830572 (356.8 MB) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8d UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:13616 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8690528 (8.6 MB) TX bytes:0 (0.0 B) eth2 Link encap:Ethernet HWaddr 00:04:23:e1:77:6a UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:7750 errors:0 dropped:471 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2780935 (2.7 MB) TX bytes:0 (0.0 B) eth3 Link encap:Ethernet HWaddr 00:04:23:e1:77:6b UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:5112 errors:0 dropped:206 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:639472 (639.4 KB) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:04:23:b6:35:6c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:961467 errors:0 dropped:935 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:958561305 (958.5 MB) TX bytes:0 (0.0 B) eth5 Link encap:Ethernet HWaddr 00:04:23:b6:35:6d inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4264 errors:0 dropped:16 overruns:0 frame:0 TX packets:699 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:572228 (572.2 KB) TX bytes:124456 (124.4 KB) I tried the defaults, then started to play around with settings. I wasn't using any flow control and I increased the RxDescriptor count to 4096 before the upgrade as well without any problems. # cat /etc/modprobe.d/e1000.conf options e1000 XsumRX=0,0,0,0,0 RxDescriptors=4096,4096,4096,4096,4096 FlowControl=0,0,0,0,0 debug=16 Here's my network configuration file, I turned off checksumming and various offloading mechanisms along with setting CPU affinity with heavy use interfaces getting an entire CPU and light use interfaces sharing a CPU. I used these settings prior to the upgrade without problems. # cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual pre-up /sbin/ethtool -G eth0 rx 4096 tx 0 pre-up /sbin/ethtool -K eth0 gro off gso off rx off pre-up /sbin/ethtool -A eth0 rx off autoneg off up ifconfig eth0 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/48/smp_affinity down ifconfig eth0 down post-down /sbin/ethtool -G eth0 rx 256 tx 256 post-down /sbin/ethtool -K eth0 gro on gso on rx on post-down /sbin/ethtool -A eth0 rx on autoneg on auto eth1 iface eth1 inet manual pre-up /sbin/ethtool -G eth1 rx 4096 tx 0 pre-up /sbin/ethtool -K eth1 gro off gso off rx off pre-up /sbin/ethtool -A eth1 rx off autoneg off up ifconfig eth1 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/49/smp_affinity down ifconfig eth1 down post-down /sbin/ethtool -G eth1 rx 256 tx 256 post-down /sbin/ethtool -K eth1 gro on gso on rx on post-down /sbin/ethtool -A eth1 rx on autoneg on auto eth2 iface eth2 inet manual pre-up /sbin/ethtool -G eth2 rx 4096 tx 0 pre-up /sbin/ethtool -K eth2 gro off gso off rx off pre-up /sbin/ethtool -A eth2 rx off autoneg off up ifconfig eth2 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "1" > /proc/irq/82/smp_affinity down ifconfig eth2 down post-down /sbin/ethtool -G eth2 rx 256 tx 256 post-down /sbin/ethtool -K eth2 gro on gso on rx on post-down /sbin/ethtool -A eth2 rx on autoneg on auto eth3 iface eth3 inet manual pre-up /sbin/ethtool -G eth3 rx 4096 tx 0 pre-up /sbin/ethtool -K eth3 gro off gso off rx off pre-up /sbin/ethtool -A eth3 rx off autoneg off up ifconfig eth3 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "2" > /proc/irq/83/smp_affinity down ifconfig eth3 down post-down /sbin/ethtool -G eth3 rx 256 tx 256 post-down /sbin/ethtool -K eth3 gro on gso on rx on post-down /sbin/ethtool -A eth3 rx on autoneg on auto eth4 iface eth4 inet manual pre-up /sbin/ethtool -G eth4 rx 4096 tx 0 pre-up /sbin/ethtool -K eth4 gro off gso off rx off pre-up /sbin/ethtool -A eth4 rx off autoneg off up ifconfig eth4 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/77/smp_affinity down ifconfig eth4 down post-down /sbin/ethtool -G eth4 rx 256 tx 256 post-down /sbin/ethtool -K eth4 gro on gso on rx on post-down /sbin/ethtool -A eth4 rx on autoneg on auto eth5 iface eth5 inet static pre-up /etc/fw.conf address 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 192.168.1.2 192.168.1.3 up ifconfig eth5 up post-up echo "8" > /proc/irq/77/smp_affinity down ifconfig eth5 down Here's a few examples of packet drops, i ran one after another, probabling totaling 3 or 4 seconds. You can see increases in the drops from the 1st and 3rd. This was a non-busy time, very little traffic. # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 505 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 507 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 227 lo: 0 eth2: 512 eth1: 0 eth5: 17 eth0: 105 eth4: 1039 I tried the pci=noacpi options. With and without, it's the same. This is what my interrupt stats looked like before the upgrade, after, with ACPI on PCI it showed multiple NICs bound to an interrupt and shared with other devices such as USB drives which I didn't like so I think i'm going to keep it with ACPI off as it's easier to designate sole purpose interrupts. Is there any advantage I would have using the default i.e. ACPI w/ PCI. ? # cat /etc/default/grub | grep CMD_LINE GRUB_CMDLINE_LINUX_DEFAULT="ipv6.disable=1 noacpi pci=noacpi" GRUB_CMDLINE_LINUX="" # cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0: 45 0 0 16 IO-APIC-edge timer 1: 1 0 0 7936 IO-APIC-edge i8042 2: 0 0 0 0 XT-PIC-XT-PIC cascade 6: 0 0 0 3 IO-APIC-edge floppy 8: 0 0 0 1 IO-APIC-edge rtc0 9: 0 0 0 0 IO-APIC-edge acpi 12: 0 0 0 1809 IO-APIC-edge i8042 14: 1 0 0 4498 IO-APIC-edge ata_piix 15: 0 0 0 0 IO-APIC-edge ata_piix 16: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb2 18: 0 0 0 1350 IO-APIC-fasteoi uhci_hcd:usb4, radeon 19: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb3 23: 0 0 0 4099 IO-APIC-fasteoi ehci_hcd:usb1 38: 0 0 0 61963 IO-APIC-fasteoi megaraid 48: 0 0 1002319 4 IO-APIC-fasteoi eth0 49: 0 0 38772 3 IO-APIC-fasteoi eth1 77: 0 0 130076 432159 IO-APIC-fasteoi eth4 78: 0 0 0 23917 IO-APIC-fasteoi eth5 82: 1329033 0 0 4 IO-APIC-fasteoi eth2 83: 0 4886525 0 6 IO-APIC-fasteoi eth3 NMI: 5 6 4 5 Non-maskable interrupts LOC: 61409 57076 64257 114764 Local timer interrupts SPU: 0 0 0 0 Spurious interrupts IWI: 0 0 0 0 IRQ work interrupts RES: 17956 25333 13436 14789 Rescheduling interrupts CAL: 22436 607 539 478 Function call interrupts TLB: 1525 1458 4600 4151 TLB shootdowns TRM: 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 Machine check exceptions MCP: 16 16 16 16 Machine check polls ERR: 0 MIS: 0 Here's sample output of vmstat, showing the system. Barebones system right now. root@nms:~# vmstat -S m 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 14992 192 1029 0 0 56 2 419 29 1 0 99 0 0 0 0 14992 192 1029 0 0 0 0 922 27 0 0 100 0 0 0 0 14991 192 1029 0 0 0 36 763 50 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 646 35 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 722 54 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 793 27 0 0 100 0 ^C Here's dmesg output. I can't figure out why my PCI-X slots are negotiated as PCI. The network cards are all PCI-X with the exception of the integrated NICs that came with the server. In the output below it looks as if eth3 and eth2 negotiated at PCI-X speeds rather than PCI:66Mhz. Wouldn't they all drop to PCI:66Mhz? If your integrated NICs are PCI, as labeled below (eth0,eth1), then wouldn't all devices on your bus speed drop down to that slower bus speed? If not, I still don't know why only one of my NICs ( each has two ethernet ports) is labeled as PCI-X in the output below. Does that mean it is running at PCI-X speeds are is it showing that it's capable? # dmesg | grep e1000 [ 3678.349337] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3678.349342] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3678.349394] e1000 0000:06:07.0: PCI->APIC IRQ transform: INT A -> IRQ 48 [ 3678.409725] e1000 0000:06:07.0: Receive Descriptors set to 4096 [ 3678.409730] e1000 0000:06:07.0: Checksum Offload Disabled [ 3678.409734] e1000 0000:06:07.0: Flow Control Disabled [ 3678.586409] e1000 0000:06:07.0: eth0: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8c [ 3678.586419] e1000 0000:06:07.0: eth0: Intel(R) PRO/1000 Network Connection [ 3678.586642] e1000 0000:07:08.0: PCI->APIC IRQ transform: INT A -> IRQ 49 [ 3678.649854] e1000 0000:07:08.0: Receive Descriptors set to 4096 [ 3678.649859] e1000 0000:07:08.0: Checksum Offload Disabled [ 3678.649863] e1000 0000:07:08.0: Flow Control Disabled [ 3678.826436] e1000 0000:07:08.0: eth1: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8d [ 3678.826444] e1000 0000:07:08.0: eth1: Intel(R) PRO/1000 Network Connection [ 3678.826627] e1000 0000:09:04.0: PCI->APIC IRQ transform: INT A -> IRQ 82 [ 3679.093266] e1000 0000:09:04.0: Receive Descriptors set to 4096 [ 3679.093271] e1000 0000:09:04.0: Checksum Offload Disabled [ 3679.093275] e1000 0000:09:04.0: Flow Control Disabled [ 3679.130239] e1000 0000:09:04.0: eth2: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6a [ 3679.130246] e1000 0000:09:04.0: eth2: Intel(R) PRO/1000 Network Connection [ 3679.130449] e1000 0000:09:04.1: PCI->APIC IRQ transform: INT B -> IRQ 83 [ 3679.397312] e1000 0000:09:04.1: Receive Descriptors set to 4096 [ 3679.397318] e1000 0000:09:04.1: Checksum Offload Disabled [ 3679.397321] e1000 0000:09:04.1: Flow Control Disabled [ 3679.434350] e1000 0000:09:04.1: eth3: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6b [ 3679.434360] e1000 0000:09:04.1: eth3: Intel(R) PRO/1000 Network Connection [ 3679.434553] e1000 0000:0a:03.0: PCI->APIC IRQ transform: INT A -> IRQ 77 [ 3679.704072] e1000 0000:0a:03.0: Receive Descriptors set to 4096 [ 3679.704077] e1000 0000:0a:03.0: Checksum Offload Disabled [ 3679.704081] e1000 0000:0a:03.0: Flow Control Disabled [ 3679.738364] e1000 0000:0a:03.0: eth4: (PCI:33MHz:64-bit) 00:04:23:b6:35:6c [ 3679.738371] e1000 0000:0a:03.0: eth4: Intel(R) PRO/1000 Network Connection [ 3679.738538] e1000 0000:0a:03.1: PCI->APIC IRQ transform: INT B -> IRQ 78 [ 3680.046060] e1000 0000:0a:03.1: eth5: (PCI:33MHz:64-bit) 00:04:23:b6:35:6d [ 3680.046067] e1000 0000:0a:03.1: eth5: Intel(R) PRO/1000 Network Connection [ 3682.132415] e1000: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.224423] e1000: eth1 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.316385] e1000: eth2 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.408391] e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.500396] e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.708401] e1000: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX At first I thought it was the NIC drivers but I'm not so sure. I really have no idea where else to look at the moment. Any help is greatly appreciated as I'm struggling with this. If you need more information just ask. Thanks! [1]http://www.cs.fsu.edu/~baker/devices/lxr/http/source/linux/Documentation/networking/e1000.txt?v=2.6.11.8 [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm

    Read the article

  • Review of Samsung Focus Windows Phone 7

    - by mbcrump
    I recently acquired a Samsung Focus Windows Phone 7 device from AT&T and wanted to share what I thought of it as an end-user. Before I get started, here are several of my write-ups for the Windows Phone 7. You may want to check out the second article titled: Hands-on WP7 Review of Prototype Hardware. From start to finish with the final version of Visual Studio Tools for Windows Phone 7 Hands-on : Windows Phone 7 Review on Prototype Hardware. Deploying your Windows Phone 7 Application to the actual hardware. Profile your Windows Phone 7 Application for Free Submitting a Windows Phone 7 Application to the Market. Samsung Focus i917 Phone Size: Perfect! I have been carrying around a Dell Streak (Android) and it is about half the size. It is really nice to have a phone that fits in your pocket without a lot of extra bulk. I bought a case for the Focus and it is still a perfect size.  The phone just feels right. Screen: It has a beautiful Super AMOLED 480x800 screen. I only wish it supported a higher resolution. The colors are beautiful especially in an Xbox Live Game.   3G: I use AT&T and I've had spotty reception. This really can't be blamed on the phone as much as the actual carrier. Battery: I've had excellent battery life compared to my iPhone and Android devices. I usually use my phone throughout the day on and off and still have a charge at the end of the day.  Camera/Video: I'm still looking for the option to send the video to YouTube or the Image to Twitter. The images look good, but the phone needs a forward facing camera. I like the iPhone/Android (Dell Streak) camera better. Built-in Speaker: Sounds great. It’s not a wimpy speaker that you cannot hear.  CPU: Very smooth transitioning from one screen to another. The prototype Windows Phone 7 that I had, was no where near as smooth. (It was also running a slower processor though). OS: I actually like the OS but a few things could be better. CONS: Copy and Paste (Supposed to come in the next update) We need more apps (Pandora missing was a big one for me and Slacker’s advertisement sucks!). As time passes, and more developers get on board then this will be fixed. The browser needs some major work. I have tried to make cross-platform (WP7, Android, iPhone and iPad) web apps and the browser that ships with WP7 just can’t handle it.  Apps need to be organized better. Instead of throw them all on one screen, it would help to allow the user to create categories. PROS: Hands down the best gaming experience on a phone. I have all three major phones (iphone, android and wp7). Nothing compares to the gaming experience on the WP7. The phone just works. I’ve had a LOT of glitches with my Android device. I’ve had maybe 2 with my WP7 device. Exchange and Office support are great. Nice integration with Twitter/Facebook and social media. Easy to navigate and find the information you need on one screen. Let’s look at a few pictures and we will wrap up with my final thoughts on the phone. WP7 Home Screen. Back of the phone is as stylish. It is hard to see due to the shadow but it is a very thin phone. What’s included? Manuals Ear buds Data Cable plus Power Adapter Phone Click a picture to enlarge So, what are my final thoughts on the Phone/OS? I love the Samsung Focus and would recommend it to anyone looking for a WP7 device. Like any first generation product, you need to give it a little while to mature. Right now the phone is missing several features that we are all used to using. That doesn’t mean a year from now it will be in the same situation. (I sure hope we won’t). If you are looking to get into mobile development, I believe WP7 is the easiest platform to develop from. This is especially true if you have a background in Silverlight or WPF.    Subscribe to my feed

    Read the article

  • Information Indepth Newsletter - Linux Edition

    - by Paulo Folgado
    INFORMATION INDEPTH NEWSLETTERLinux Edition February 2011 Stay Connected:  NEWS Now Available: Oracle Linux 6 Get the latest release of Oracle Linux 6, which includes Unbreakable Enterprise Kernel.Download Oracle Linux 6 Read More Customers Succeed by Using Oracle Exadata with Oracle Linux Watch IT executives from Bank of America, Linkshare, and Johns Hopkins as they talk about the business challenges they faced and why they chose to use Oracle Linux along with Oracle Exadata as the solution. Watch Now Video Interview: Oracle Senior Vice President Wim Coekaerts Watch Wim Coekaerts, senior vice president, Linux and Virtualization Engineering, as he talks about use cases for Oracle VM Templates as well as the Unbreakable Enterprise Kernel for Linux.Watch Now Hot Off the Press: Migrate Your IBM AIX Environment to Oracle Linux This new white paper provides recommendations for planning and implementing the migration of applications from an IBM Power System running AIX to Oracle's Sun Fire X4800 Server with Intel Xeon 7560 Processor running Oracle Linux 5.5.Read More  Back to Top BLOGOSPHERE Just Launched: The Oracle Linux Blog Follow our new Oracle Linux blog  to hear the latest updates, product news, upcoming events, and all the latest happenings, directly from the Linux team at Oracle. Back to Top TECH DIVE NEW: Linux/Oracle Solaris CommandComparo Site from Oracle Technology NetworkThis site gives equivalent command syntax in Oracle Solaris 10 and Oracle Enterprise Linux 5 for common administrative tasks--focusing particularly on tasks that have tricky syntax or that you frequently need to double check. It acts as a quick reference for administrators who operate in these two OS environments. Free Download: Oracle Linux Release 5.6Did you know that by using Oracle Linux 5.5 or 5.6 along with the Unbreakable Enterprise Kernel, you can get all the benefits of Linux mainline kernel 2.6.32 and more, right now, without the need to reinstall or migrate to a new operating system such as RHEL6?Read Release NotesDownload Oracle Linux 5.6 LSB 4.0 Certification Completed for Oracle Linux 5.5Oracle Linux 5.5 with Unbreakable Enterprise Kernel successfully completed the LSB 4.0 certification.  Back to Top WEBCASTS Boost Your Linux Performance with Oracle's Enhancements in Infiniband and RDSRegister to hear Director of Kernel Engineering Chris Mason cover scalability and performance improvements in Linux environment. Get the Facts Oracle's Unbreakable Enterprise KernelSVP Wim Coekaerts and Senior Director Monica Kumar cover the facts about and benefits of using Unbreakable Enterprise Kernel.  View Other Webcasts on Demand   Back to Top EVENTS Collaborate 2011April 10-14 Orlando, Florida Cloud Summit Events, WorldwideVarious dates (check the city for date/time of event) Datacenter Efficiency Events WorldwideThese events include Linux and Oracle VM sessions.Various dates (check the city for date/time of event) Virtualization Events in North America Find an Oracle Event  Back to Top EDUCATION Get Oracle Linux Certified from Oracle University Oracle University offers courses in both Oracle Linux and the administration of Oracle Database on Linux.  Back to Top CUSTOMER SPOTLIGHT Pella Corporation Improves IT Performance and Efficiency with Oracle Linux and Oracle VM To improve IT performance and efficiency and lower operational costs, Pella Corporation, has standardized on Oracle VM and Oracle Linux. Read More Disney Store Deploys POS in 330 Stores and 7 Countries on Oracle Linux Disney Store is running 1,500 registers worldwide on a broad Oracle technology software stack including Oracle Database 11g, Oracle Fusion Middleware, and Oracle Linux. Read More Back to Top PARTNER SPOTLIGHT Emulex and Oracle Announce Data Integrity Features The Unbreakable Enterprise Kernel provides data integrity checking between Oracle Database applications and Emulex 8Gb/s LightPulse Fibre Channel Host Bus Adapters. Read More Dell Inc. Dell Inc. tested and validated configurations support Oracle Linux. Back to Top STAY IN TOUCH Follow @ORCL_Linux on Twitter for the latest penguin tweets Bookmark Oracle.com/Linux Read the Oracle Linux blog Back to Top  Oracle Information InDepth newsletters bring targeted news, articles, customer stories, and special offers to business people who want to find out how to streamline enterprise information management, measure results, improve business processes, and communicate a single truth to their constituents. Please send questions or comments to [email protected]. For answers to questions about subscribing, unsubscribing, and managing your Oracle e-mail communications preferences, please see the Oracle E-Mail Communications page. Copyright © 2011, Oracle Corporation and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. This document is provided for information purposes only, and the contents hereof are subject to change without notice. This document is not warranted to be error-free, nor is it subject to any other warranties or conditions, whether expressed orally or implied in law, including implied warranties and conditions of merchantability or fitness for a particular purpose. We specifically disclaim any liability with respect to this document, and no contractual obligations are formed either directly or indirectly by this document. This document may not be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without our prior written permission. 

    Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >