Search Results

Search found 8193 results on 328 pages for 'dev ray'.

Page 65/328 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• Dual booting windows 8/ubuntu 12.04.2, Grub doesn't appear and machine never boot in ubuntu

  - by black sensei

  i got a new ACER predator AG3620-UR308 which came with windows 8, so i wanted to run ubuntu 12.04.2 on it as a dual booting. To be honest, i've been doing dual booting for a while now so, i did the right thing. the box came with 2TB HDD. so i made 4 partitions with a raw partition just after the windows installation partition I always do manual installation so even if ubuntu didn't detect windows 8, it was ok for me. So i created swap area and finished the installation etc....Grub was install on the only drive there which is sda. After reboot, grub doesn't even come up.So it always boot in windows 8. I did repeat the installation process twice and yield same result. which is weird because this method always works for me so far.Even the laptop am using to write this post is a dual booting windows 7/ mint nadia installed the same way. Is there anything new in windows 8 that i didn't make provision for? Before starting the installation, all i read about was that , windows 8 should be installed first and ubuntu after. I went ahead and disable secure boot from the BIOS and enabled CSM (don't even know what it means) according to Acer custhelp site . I boot from USB and did fdisk -l bellow is the result: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x8c361cb5 Device Boot Start End Blocks Id System /dev/sda1 1 3907029167 1953514583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sdb: 8178 MB, 8178892800 bytes 255 heads, 63 sectors/track, 994 cylinders, total 15974400 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006a87e Device Boot Start End Blocks Id System /dev/sdb1 * 2048 15972351 7985152 b W95 FAT32 ubuntu@ubuntu:~$ Can anybody shed some light? thank you in advance EDIT Hey, i just did another trial with 13.04 this time and still no luck. bios: secure-boot: disabled enable CSM : always 1-delete previous ubuntu partition and swap area partition.now having free space 2- used usb installer to prepare usb with ubuntu-13.04-desktop-amd64.iso 3- rebooted : liveusb didnt detect windows 8, used something else 4-created partition ext4 for / 5-created partition for swap-area 6- default grub path is /dev/sda and clicked install Acer always boots into windows.

  Read the article

• Keep cube spinning after fling

  - by Zero

  So I've been trying to get started with game development for Android using Unity3D. For my first project I've made a simple cube that you can spin using touch. For that I have the following code: using UnityEngine; using System.Collections; public class TouchScript : MonoBehaviour { float speed = 0.4f; bool canRotate = false; Transform cachedTransform; public bool CanRotate { get { return canRotate; } private set { canRotate = value; } } void Start () { // Make reference to transform cachedTransform = transform; } // Update is called once per frame void Update () { if (Input.touchCount > 0) { Touch touch = Input.GetTouch (0); // Switch through touch events switch (Input.GetTouch (0).phase) { case TouchPhase.Began: if (VerifyTouch (touch)) CanRotate = true; break; case TouchPhase.Moved: if (CanRotate) RotateObject (touch); break; case TouchPhase.Ended: CanRotate = false; break; } } } bool VerifyTouch (Touch touch) { Ray ray = Camera.main.ScreenPointToRay (touch.position); RaycastHit hit; // Check if there is a collider attached already, otherwise add one on the fly if (collider == null) gameObject.AddComponent (typeof(BoxCollider)); if (Physics.Raycast (ray, out hit)) { if (hit.collider.gameObject == this.gameObject) return true; } return false; } void RotateObject (Touch touch) { cachedTransform.Rotate (new Vector3 (touch.deltaPosition.y, -touch.deltaPosition.x, 0) * speed, Space.World); } } The above code works fine. However, I'm wondering how I can keep the cube spinning after the user lifts his finger. The user should be able to "fling" the cube, which would keep spinning and after a while would slowly come to a stop due to drag. Should I do this using AddForce or something? I'm really new to this stuff so I'd like it if you guys could point me in the right direction here :) .

  Read the article

• "The volume filesystem root has only..."

  - by jcslzr

  I am having this problem in ubuntu 12.04, but I fin strange that when I go to /tmp it wont allow me to delete some files, with message "Operation not permitted" or "this file could not be handled because you dont have permissions to read it". It is only a PC and I have the root password. I was trying to get at least 2000 MB of free space on the root file system to upgrade to 12.10 and see if that resolved the problem. Currently free space on root file system is 190 MB. This is my output: root@jcsalazar-Vostro-3550:~# df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda6 7688360 7112824 184984 98% / udev 2009288 4 2009284 1% /dev tmpfs 806636 1024 805612 1% /run none 5120 0 5120 0% /run/lock none 2016584 5316 2011268 1% /run/shm /dev/sda5 472036 255920 191745 58% /boot /dev/sda7 30758848 7085480 22110900 25% /home root@jcsalazar-Vostro-3550:~# sudo parted -l Model: ATA TOSHIBA MK3261GS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 106MB 105MB primary fat16 2 106MB 15.8GB 15.7GB primary ntfs boot 3 15.8GB 278GB 262GB primary ntfs 4 278GB 320GB 41.9GB extended 5 278GB 279GB 499MB logical ext4 6 279GB 287GB 7999MB logical ext4 7 287GB 319GB 32.0GB logical ext4 8 319GB 320GB 1443MB logical linux-swap(v1) I apprecciate any new ideas that can help me. Thnx Carlos

  Read the article

• Setting up group disk quotas

  - by Ray

  I am hoping to get some advice in setting up disk quotas. So, I know about: Adding usrquota and grpquota on to /etc/fstab for the file systems that need to be managed. Using edquota to assign disk quotas to users. However, I need to do the last step for multiple users and edquota seems to be a bit troublesome. One solution that I have found is that I can do: sudo edquota -u foo -p bar. This will copy the disk quota of bar to user foo. I was wondering if this is the best solution? I tried setting up group disk quotas but they don't seem to be working. Are group quotas meant to help in the assignment of the same quota to multiple users? Or are they suppose to give a total limit to a set of users? For example, if users A, B, C are in group X then assigning a quota of 20 GB gives each user 20 GB or does it give 20 GB to the entire group X to divide up? I'm interested in doing the former, but not the latter. Right now, I've assigned group disk quotas and they aren't working. So, I guess it is due to my misunderstanding of group disk quotas... My problem is I want to easily give the same quota to multiple users; any suggestions on the best way to do this out of what I've tried above or anything else I may not have thought of? Thank you!

  Read the article

• root and home are on seperate partitions, but home still uses up space on root?

  - by Void

  When installing Ubuntu 12.10 for the first time, I made sure /home had it's own partition, gave it about 185GB, and gave root ~10GB. Now root is almost full after a few days and I've noticed that root is as big as /home and some additional MB from some actual root files. Note that I deleted some unused files in /home to make sure it really affects how much space is used in root, and it clearly does. (checked in gparted) I've also made sure the files I am talking about are actually in /home/myname/ and not just in root's home. df -h spits out this information: df: `/root/.gvfs': Permission denied Filesystem Size Used Avail Use% Mounted on /dev/sdb2 9.2G 7.9G 908M 90% / udev 3.9G 12K 3.9G 1% /dev tmpfs 1.6G 932K 1.6G 1% /run none 5.0M 0 5.0M 0% /run/lock none 3.9G 6.4M 3.9G 1% /run/shm none 100M 112K 100M 1% /run/user /dev/sdb3 184G 4.9G 170G 3% /home /dev/sdb4 729G 87G 642G 12% /media/mave/Storage I cut out my windows partitions as I don't see any relevance. I hope this is enough information for someone to tell me what I did wrong

  Read the article

• Can I ping via an arbitrary interface of a DD-WRT system? [migrated]

  - by bytebuster

  There's a Linksys WRT54GL router with DD-WRT firmware (v23SP2). The network has a simple dual-WAN configuration (standby mode, switching by a script): ~ # ip route 192.168.3.0/24 dev br0 proto kernel scope link src 192.168.3.1 192.168.2.0/24 dev vlan2 proto kernel scope link src 192.168.2.2 192.168.1.0/24 dev vlan1 proto kernel scope link src 192.168.1.67 127.0.0.0/8 dev lo scope link default via 192.168.2.1 dev vlan2 I'm trying to ping a certain server arbitrary via vlan1 or vlan2. What I tried, as suggested here: ping -I vlan2 <address> ping 192.168.2.1 <address> In both cases ping simply exits with no error messages. Also, ping ignores many other parameters, again, by exiting silently. I failed to find any references that DD-WRT has a limited version of ping whatsoever. I also don't think it can be a permissions issue as mentioned here since the only user with DD-WRT is root. What's wrong?

  Read the article

• MySQL Workbench 5.2.39 GA Released

  - by user13164789

  The MySQL Developer Tools team is announcing the next maintenance release of its flagship product, MySQL Workbench, version 5.2.39. This version contains MySQL Utilities 1.0.5, a set of command line Python utilities for helping to perform and script various administration tasks for MySQL. A complete list of changes in this release of the Utilities can be found at:http://dev.mysql.com/doc/workbench/en/wb-utils-news-1-0-5.html MySQL Workbench 5.2 GA • Data Modeling • Query (replaces the old MySQL Query Browser) • Administration (replaces the old MySQL Administrator) Please get your copy from our Download site. Sources and binary packages are available for several platforms, including Windows, Mac OS X and Linux. http://dev.mysql.com/downloads/workbench/ Workbench Documentation can be found here. http://dev.mysql.com/doc/workbench/en/index.html Utilities Documentation can be found here.http://dev.mysql.com/doc/workbench/en/mysql-utilities.html In addition to the new Query/SQL Development and Administration modules, version 5.2 features improved stability and performance – especially in Windows, where OpenGL support has been enhanced and the UI was optimized to offer better responsiveness. This release also includes improvements to the scripting capabilities of the SQL Editor. You can read more about it in http://wb.mysql.com/workbench/doc/ For a detailed list of resolved issues, see the change log. http://dev.mysql.com/doc/workbench/en/wb-change-history.html If you need any additional info or help please get in touch with us. Post in our forums or leave comments on our blog pages. - The MySQL Workbench Team

  Read the article

• Unable to boot 12.04 server: no LVM activated and impossible to mount /

  - by baronKarza

  I'm stuck in the Busy Box shell after upgrading from Ubuntu server 11.10 to Ubuntu server 12.04 64 bit. During the booting phase the system hangs while mounting root filesystem. My system is so configured: /dev/sda1 -- /boot /dev/mapper/vg-lv_root /dev/mapper/vg-lv_var /dev/mapper/vg-lv_tmp When the boot process fails and I'm forwarded to the busybox shell, if I type vgchange -ay I can mount my volumes and all it's OK. But it does not enable LVM automatically so that it is impossible to mount root, var, and tmp. I tried to start with a Knoppix, chroot, reinstall (aptitude) both kernel and lvm2 as suggested by this tread "Fixing unbootable installation on LVM root from Desktop LiveCD": nothing changed. I can't figure out what is the problem. Any suggestion is welcome. Thanks in advance.

  Read the article

• How to auto mount partition on startup xubuntu?

  - by Bas

  I want to auto mount all my partitions on startup. But i can't get it to work as i'm new to xubuntu. This is how my fstab file looks like: proc /proc proc nodev,noexec,nosuid 0 0 #Entry for /dev/sda1 : UUID=3bf842ea-923b-43fe-b5f9-066fc920aaec / ext4 errors=remount-$ #Entry for /dev/sdb1 : UUID=F0C859BDC8598330 /media/Bas ntfs-3g defaults,locale=en_US.UTF-8 $ #Entry for /dev/sda3 : UUID=146213A76D02F7AD /media/sda3 ntfs-3g defaults,locale=en_US.UTF-8 $ UUID=1C33A98704D941F1 /media/sda3 ntfs-3g defaults,locale=en_US.UTF-8 $ #Entry for /dev/sda5 : UUID=ba48c631-5652-4ce7-85a3-bda96b353ca7 none swap sw 0 $ The last line I added myself but it's not working. I spend the whole day trying to figure this out without success. So can anyone help me with this? Thanks in advance

  Read the article

• How to determine which cells in a grid intersect with a given triangle?

  - by Ray Dey

  I'm currently writing a 2D AI simulation, but I'm not completely certain how to check whether the position of an agent is within the field of view of another. Currently, my world partitioning is simple cell-space partitioning (a grid). I want to use a triangle to represent the field of view, but how can I calculate the cells that intersect with the triangle? Similar to this picture: The red areas are the cells I want to calculate, by checking whether the triangle intersects those cells. Thanks in advance. EDIT: Just to add to the confusion (or perhaps even make it easier). Each cell has a min and max vector where the min is the bottom left corner and the max is the top right corner.

  Read the article

• How do I fix the Gparted message : Error while reading block at sector xxx ?

  - by Agmenor

  When I tried to move one of my partitions, I got some error messages. Here are some extracts: Move /dev/sda7 to the left 00:05:09 ( ERROR ) (...) check file system on /dev/sda7 for errors and (if possible) fix them 00:00:10 ( SUCCESS ) e2fsck -f -y -v /dev/sda7 (...) move file system to the left 00:04:52 ( ERROR ) perform read-only test 00:04:52 ( ERROR ) using internal algorithm read 114013242 sectors finding optimal blocksize (...) read 113357882 sectors using a blocksize of 1024 sectors 00:04:36 ( ERROR ) 22527034 of 113357882 read Error while reading block at sector 385849832 23182394 sectors read ( ERROR ) (...) libparted messages ( INFO ) Input/output error during read on /dev/sda What should I do to effectively move my partition?

  Read the article

• Install Windows7 on drive with Ubuntu 12.04 already on. Is my plan good?

  - by John F

  I have Ubuntu 12.04 working fine, but need W7 occasionally. I just wanted to check that my plan for installing would work? Any help appreciated. Current partitions are: Partition....@ File System @ Mount Point @ Size.....@ Used.....@ Flags /dev/sda1....@ ext4........@ /ext4a......@ 37 GiB...@ 776 MiB..@ boot /dev/sda2....@ extended....@.............@ 122 GiB..@ -........@ ./dev/sda5...@ ext4........@ / ..........@ 37 GiB...@ 6 GiB....@ .unallocated @ unallocated @.............@ 7 GiB....@ - ...... @ ./dev/sda6 ..@ ext4........@ /home.......@ 77 GiB...@ 32 GiB...@ .unallocated @ unallocated @.............@ 65 GiB...@ - .......@ /dev/sda3...@ linux-swap..@.............@ 7 GiB....@ - .......@ My plan is to: - boot to ubuntu from USB ISO - change sda1 to NTFS - install W7 to sda1 - use the "Master Boot Record repair" utility to configure dual boot so I can see my original ubuntu installation as well as W7. Have I missed something? I'm concerned as to what the 776MB is that will be overwritten by the change to NTFS. It seems large for just the MBR? Would also appreciate it if anyone can explain what sda5 and 6 are being used for? Is sda5 Ubuntu and sda6 my data? Thanks in advance.

  Read the article

• Cannot resolve a single A Record from client machine

  - by Alex

  I set up a simple Bind server on my VPS and it is working properly. The problem occurs with my local windows machines, which are connected to internet through the home router. I created an A-record named 'dev' and it is invisible from my local network for some reason, though people from other locations can resolve dev.mydomain.com. Ironically, dev.mydomain.com cannot be resolved for myself only. If I add another A-record, say, 'gamma' then it becomes visible from my local windows machines instantly. So this is just for that particular 'dev' name. The only difference is that I had dev.mydomain.com server on another IP but that was a month ago; all nameservers have been changed since then. I tried to reboot my router and flushed dns cache on windows machines: no result. Thank you in advance.

  Read the article

• Getting started with object detection - Image segmentation algorithm

  - by Dev Kanchen

  Just getting started on a hobby object-detection project. My aim is to understand the underlying algorithms and to this end the overall accuracy of the results is (currently) more important than actual run-time. I'm starting with trying to find a good image segmentation algorithm that provide a good jump-off point for the object detection phase. The target images would be "real-world" scenes. I found two techniques which mirrored my thoughts on how to go about this: Graph-based Image Segmentation: http://www.cs.cornell.edu/~dph/papers/seg-ijcv.pdf Contour and Texture Analysis for Image Segmentation: http://www.eng.utah.edu/~bresee/compvision/files/MalikBLS.pdf The first one was really intuitive to understand and seems simple enough to implement, while the second was closer to my initial thoughts on how to go about this (combine color/intensity and texture information to find regions). But it's an order of magnitude more complex (at least for me). My question is - are there any other algorithms I should be looking at that provide the kind of results that these two, specific papers have arrived at. Are there updated versions of these techniques already floating around. Like I mentioned earlier, the goal is relative accuracy of image segmentation (with an eventual aim to achieve a degree of accuracy of object detection) over runtime, with the algorithm being able to segment an image into "naturally" or perceptually important components, as these two algorithms do (each to varying extents). Thanks! P.S.1: I found these two papers after a couple of days of refining my search terms and learning new ones relevant to the exact kind of techniques I was looking for. :) I have just about reached the end of my personal Google creativity, which is why I am finally here! Thanks for the help. P.S.2: I couldn't find good tags for this question. If some relevant ones exist, @mods please add them. P.S.3: I do not know if this is a better fit for cstheory.stackexchange (or even cs.stackexchange). I looked but cstheory seems more appropriate for intricate algorithmic discussions than a broad question like this. Also, I couldn't find any relevant tags there either! But please do move if appropriate.

  Read the article

• Is it wrong to use a boolean parameter to determine behavior?

  - by Ray

  I have seen a practice from time to time that "feels" wrong, but I can't quite articulate what is wrong about it. Or maybe it's just my prejudice. Here goes: A developer defines a method with a boolean as one of its parameters, and that method calls another, and so on, and eventually that boolean is used, solely to determine whether or not to take a certain action. This might be used, for example, to allow the action only if the user has certain rights, or perhaps if we are (or aren't) in test mode or batch mode or live mode, or perhaps only when the system is in a certain state. Well there is always another way to do it, whether by querying when it is time to take the action (rather than passing the parameter), or by having multiple versions of the method, or multiple implementations of the class, etc. My question isn't so much how to improve this, but rather whether or not it really is wrong (as I suspect), and if it is, what is wrong about it.

  Read the article

• Dual boot UEFI Windows 7 and Ubuntu 12.04 (both 64 bits). W7 entry doesn't appear in GRUB

  - by Joe

  After trying to install both OS during 2 days, I'm confused and getting mad... I have SSD 128 GB and HDD 500 GB both empty. My laptop is Asus K55VM. BIOS support UEFI. What I have done: Install new SSD (Samsung 830 128GB) Use GParted on liveCD to create new table of partitions (GPT) and create 3 partitions (in the SSD) for different purposes: Partition 1: 80 GB (w7); Partition 2: 30 GB (Ubuntu 12.04 -Just / -); Partition 3: 10 GB unused (for future extesion of the other partitions) Install Windows 7 (with UEFI) in Partition 1. This create: /dev/sda1 - 100 MB for System (UEFI boot I guess) - FAT32 /dev/sda2 - 100 MB aprox. for MSR /dev/sda3 - 79.800 MB aprox. for Windows7 data In this point everything works fine. I have W7. Now I install Ubuntu 12.04 amd64 (with UEFI) as follows: Install / in Partition 2 - /dev/sda4 30 GB ext4, and in the hdd I install /home and swap. I select bootloader in /dev/sda1 (where it's supposed to be the UEFI boot). I install updates and reboot. Problem: Now just appears grub menu with Ubuntu entries and not Windows 7. Alternative solution found: When I turn on laptop, before loading GRUB I press ESC key and appear BIOS boot, so I can select to boot the Windows partition, Ubuntu partition, DVD, USB, etc... but I think is not the best way to boot different OS. I've tried: sudo update-grub2 with no success. What can I do??

  Read the article

• Is using SVN for development and CM a bad practice?

  - by GatorGuy

  I have a bit of experience with SVN as a pure programmer/developer. Within my company, however, we use SVN as our configuration management tool. I thought using SVN for development at the same time was OK since we could use branches and the trunk for dev, and tags for releases. To me, the tags were the CM part, and the branches/trunk were the dev part. Recently a person, who develops high level code (but outside of the "pure SW" group) mentioned that the existing philosophy (mixing SVN for dev and CM) was wrong... in his opinion. His reasoning is that he thinks the company's CM tool should always link to run-able SW (so branches would break this rule). He also mentioned that a CM tool shouldn't be a backup utility for daily or incremental commits. Finally, he doesn't like the idea of having to jump from revision 143 to 89 in order to get a working copy... and further that CM tools shouldn't allow reversion to a broken state. In general he wants to separate the CM and back-up/dev utilties that SVN offers. Honestly, I am new and the person with this perspective is one of seniority, experience, and success, so I want to field this dilemma with the stackoverflow userbase to see if his approach has merit. My question: Should SVN be purely used for development, and another tool for CM (or vice versa)? Why? If so, what tools would you suggest for this combo? Or do you think that integrating both CM and dev into SVN is the best approach? Why? Thanks.

  Read the article

• Nginx proxy SOAP request

  - by user2606078

  looking for a right way to accomplish the following: there is an app that have URL(1) hardcoded and no way/time to change it in the source http://dev.server.com/example.com/admin/soap/action/index?pr=1 and it should use (and get response from) URL(2) http://example.com/admin/soap/action/index?pr=1 what should I configure in Nginx (apache as backup used) conf on dev.server.com in order to give that app when it asks URL(1) answer from URL(2)? On dev.server.com Apache has virtual host: dev.server.com enabled. Also I've tried to proxy in apache instead of nginx by using ProxyPass: <Directory /var/www/dev> Options Indexes FollowSymLinks MultiViews AllowOverride all Order allow,deny allow from all </Directory> <Location /example.com/admin/soap> ProxyPass http://example.com/admin/soap </Location>

  Read the article

• Computer won't wake from hibernate

  - by Icoo

  So I have a pretty dumb problem...I accidentaly pressed Hibernate while trying to Restart...since then my computer wont boot into Ubuntu anymore (through normal mode or single user mode - rescue mode that is)...all I get is: mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys/ on root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or dirctory Target filesystem doesn't have requested /sbin/init. No init found. Try passing init= boot arg. BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) Obviously I tried to fire up the Live CD and run fsck (or e2fsck) from there (or just try to do a Check of /dev/sdb1 my partition via gparted - which is basically the same thing). But it doesn't allow me...both gparted and fsck say that the device is busy (I can't even mount it in the LiveCD to rescue data)...umount /dev/sdb1 says its not mounted...any ideas?

  Read the article

• Unable to install Emerald theme manager in Ubuntu 12.04?

  - by kernel_panic

  I learnt how to install ETM from here But when i try to install i get `ubu@sanjay-pc:~$ sudo apt-get install git autoconf libtool libwnck1.0-cil-dev libwnck-dev intltool libdecoration0-dev gawk Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.code The following information may help to resolve the situation: The following packages have unmet dependencies: libdecoration0-dev : Depends: libdecoration0 (= 1:0.9.7.6-0ubuntu1) but 1:0.9.7.8-0ubuntu1 is to be installed E: Unable to correct problems, you have held broken packages. ` Help Needed

  Read the article

• Resize the /var directory in redhat enterprise edition 4

  - by Sri

  I am running NDB mysql. the log files fills up the /var directory. therefore i cant start the ndbd service now. as a temporary fix, i have deleted the log files and again working fine. but again the log files fill up the /var directory. i got plenty of space in other partition. therefore i would like to swap the partition from one directory to /var. here if my input from df -h Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 ext3 54G 2.9G 49G 6% / /dev/cciss/c0d0p1 ext3 99M 14M 81M 14% /boot none tmpfs 1013M 0 1013M 0% /dev/shm /dev/cciss/c0d0p2 ext3 9.7G 9.7G 0 100% /var there are plenty of space in /dev/mapper/VolGroup00-LogVol00. Therefore i will like to swap 10 G space from this directory to /var. could you please help me out to solve this problem?

  Read the article

• Database Development and Source Control

  - by Enrique Lima

  I have been working with Database Development and the aspects that come with it, the pain and the joy of moving from Dev to QA and then on to Production.  Source Control has a place in Dev, and that is where the baselines should be established. Where am I going with this? I have been working with Redgate’s Source Control 3.0, and I am seeing some features that are great for the process of moving from Dev to … well something that allows for quite a level of control.  We are not only talking about scripting the structure of a database, but creating a baseline, working with migration scripts, and integrated with Redgate’s Schema Compare.  There is a detailed paper that will be posted here in the next day or so to provide step by step information of the process to define your baseline in Dev and then take it to the desired destination. In the meantime, check the Webinars Redgate has regarding this process and products.

  Read the article

• No operating system found even when grub2 was reinstalled

  - by Cruzer

  I know there have been many variations on this question and have certainly tried to do my research. I don't really know what I'm doing so I would rather not take risks. I am trying to dual boot xubuntu and windows 7. I started out with xubuntu and just installed windows. Of course, the mbr got overwritten and windows didn't seem to recognize linux. So I booted to the live cd and rewrote the mbr. And of course, now I get the error "No Operating System Found" on startup. I have been following these tutorials to help me out. community.linuxmint.com/tutorial/view/245 unix.stackexchange.com/questions/96977/grub-wont-install ubuntuforums.org/showthread.php?t=2036730 Specifically, I ran these commands: # sdb2 is the partition with xubuntu sudo mount /dev/sdb2 /mnt # sdb1 is my boot partition sudo mount /dev/sdb1 /mnt/boot # not sure what this does, but ran it anyway... for i in /dev /dev/pts /proc /sys /run; do sudo mount -B $i /mnt$i; done sudo chroot /mnt #once chrooted grub-install /dev/sdb update-grub here's a link to my gparted https://www.dropbox.com/s/zpbbzh9z7k1l3pj/gparted.png EDIT--- didn't realize that the drive letters are different in the picture than in my code (its sda in the pic instead of sdb). I have been restarting a lot and sometimes the drive letters change and make my usb into sda.

  Read the article

• Volume expanded in Volume Group, old disk reduced but still in use in system

  - by Yurij73

  Tryed to add a new hard sdb (not formated) to my virtualbox Centos. Successfully extended an existing vg_localhost to /dev/sdb/ # lvdisplay --- Logical volume --- LV Path /dev/vg_localhost/lv_root LV Name lv_root VG Name vg_localhost LV UUID DkYX7D-DMud-vLaI-tfnz-xIJJ-VzHz-bRp3tO LV Write Access read/write LV Creation host, time localhost.centos, 2012-12-17 LV Status available # open 1 LV Size 18,03 GiB Current LE 4615 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 20G 0 disk +-vg_localhost-lv_root (dm-0) 253:0 0 18G 0 lvm / +-vg_localhost-lv_swap (dm-1) 253:1 0 2G 0 lvm [SWAP] sda 8:0 0 9G 0 disk +-sda1 8:1 0 500M 0 part /boot +-sda2 8:2 0 8,5G 0 part sr0 11:0 1 1024M 0 rom df -h /dev/mapper/vg_localhost-lv_root 6,5G 6,2G 256M 97% / tmpfs 499M 200K 499M 1% /dev/shm /dev/sda1 485M 78M 382M 17% /boot it still old sda in use, what i have to do further?

  Read the article

• In a team practicing Domain Driven Design, should the whole team participate in Stakeholder meetings?

  - by thirdy

  In my experience, a Software Development Team that comprises: 1 Project Manager 1 Tech Lead 1 - 2 Senior Dev 2 - 3 Junior Dev (Fresh grad) Only the Tech Lead & PM (and/or Senor Dev/s) will participate in a meeting with Clients, Domain Experts, Client's technical resource. I can think of the ff potential pitfalls: Important info gets lost Human error (TL/PM might forgot to disseminate info due to pressure or plain human error) Non-verbal info (maybe a presentation using a diagram presented by Domain Expert) Maintaining Ubiquitous language is harder to build since not all team members get to hear the non-dev persons Potential of creative minds are not fully realized (Personally, I am more motivated to think/explore when I am involved with these important meetings) Advantages of this approach: Only one point of contact Less time spent on meetings? Honestly, I am biased & against this approach. I would like to hear your opinions. Is this how you do it in your team? Thanks in advance!

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >