Search Results

Search found 52528 results on 2102 pages for 'error'.

Page 65/2102 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

• How to fix AVI index error

  - by Tim

  I try to open an AVI file. The first software I tried is VLC media player. It reports some error about AVI index: This AVI file is broken. Seeking will not work correctly. Do you want to try to fix it? This might take a long time. I chose yes, and it began fixing AVI index and existed when the repair progress bar reaches 20% or so. Then the video started playing and stopped much earlier than when it is supposed to finish. Next I tried to open it in Totem Movie Player, which also stopped earlier at the same place as in VLC player. I tried to play it in GMplayer. Now the entire AVI file can be played from start to finish, but it is impossible to drag playing progress bar while it was possible in VLC player and Totem player. I heard that Avidemux can fix AVI index error, but later discovered it even failed to open the AVI file before it could try to fix the error. So I was wondering how I can fix the AVI index error, or at least drag the playing progress bar in GMplayer? Thanks and regards!

  Read the article

• BizTalk 2009 - Error when Testing Map with Flat File Source Schema

  - by StuartBrierley

  I have recently been creating some flat file schemas using the BizTalk Server 2009 Flat File Schema Wizard.  I have then been mapping these flat file schemas to a "normal" xml schema format. I have not previsouly had any cause to map flat files and ran into some trouble when testing the first of these flat file maps; with an instance of the flat file as the source it threw an XSL transform error: Test Map.btm: error btm1050: XSL transform error: Unable to write output instance to the following <file:///C:\Documents and Settings\sbrierley\Local Settings\Temp\_MapData\Test Mapping\Test Map_output.xml>. Data at the root level is invalid. Line 1, position 1. Due to the complexity of the map in question I decided to created a small test map using the same source and destination schemas to see if I could pinpoint the problem.  Although the source message instance vaildated correctly against the flat file schema, when I then tested this simplified map I got the same error. After a time of fruitless head scratching and some serious google time I figured out what the problem was. Looking at the map properties I noticed that I had the test map input set to "XML" - for a flat file instance this should be set to "native".

  Read the article

• Input/output error, when trying to install on netbook [closed]

  - by Ben

  Been trying to install ubuntu on my Samsung NB30 netbook, but I have been running into the same error over and over again. [Errno 5] Input/output error This particular error is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment. I'm installing from the USB bootable version, I get the exact same error at the exact same point when trying to install both ubuntu desktop and ubuntu desktop remix. I've tried redownloading both ISOs twice and I've tried two different USB sticks (one being completely new). I've tried installing from with in an ubuntu live session and I get the exact same problem. I've ran a bootable memtest and everything passes with no errors, I've also ran a dmesg in terminal after the installer fails here's what it reported - http://bit.ly/exAQRR Thanks in advance! EDIT: I know this was ages ago, but to anyone out there with the same issue, the problem turned out to be the downloaded image, my internet is poor at the best of times and the ISO failed the MD5sum check, if this happens to you I recommend you download the ISO image by torrent, it'll check the integrity of the file is maintained.

  Read the article

• Methodology To Determine Cause Of User Specific Error

  - by user3163629

  We have software that for certain clients fails to download a file. The software is developed in Python and compiled into an Windows Executable. The cause of the error is still unknown but we have established that the client has an active internet connection. We suspect that the cause is due to the clients network setup. This error cannot be replicated in house. What technique or methodology should be applied to this kind of specific error that cannot be replicated in house. The end goal is to determine the cause of this error so we can move onto the solution. For example; Remote Debugging: Produce a debug version of the software and ask the client to send back a debug output file. This involves alot of time (back and forth communication) and requires the client to work and act in a timely manor to be successful. In-house debugging: Visit the client and determine their network setup, etc. Possibly develop a series of script tests before hand to run on the clients computer under the same network. Other methodologies and techniques I am not aware of?

  Read the article

• when I type apt-get -f install, I get the error message

  - by gene

  xserver-xorg-core (2:1.11.4-0ubuntu10.8) breaks xserver-xorg-video-5 and is installed. Also I can not upgrade my software, It said that the package system is broken, with detail information: The following packages have unmet dependencies: xserver-xorg-core: Depends: xserver-common (>= 2:1.11.4-0ubuntu10.8) but 2:1.11.4-0ubuntu10.8 is installed when I issue sudo apt-get update, the output seems fine the source is(sorry the output has too many links that I can not post in);http://archive.ubuntu.com Reading package lists... Done ====================== when I issue sudo apt-get dist-upgrade, the output is: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these. The following packages have unmet dependencies: xserver-xorg-core : Breaks: xserver-xorg-video-5 E: Unmet dependencies. Try using -f. ================== when I issue 'sudo apt-get -f install', the output is: dpkg: dependency problems prevent configuration of xserver-xorg-video-radeon: xserver-xorg-core (2:1.11.4-0ubuntu10.8) breaks xserver-xorg-video-5 and is installed. xserver-xorg-video-radeon (1:6.12.1-0ubuntu2) provides xserver-xorg-video-5. dpkg: error processing xserver-xorg-video-radeon (--configure):dependency problems leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: xserver-xorg-video-radeon E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• "Programming error" exceptions - Is my approach sound?

  - by Medo42

  I am currently trying to improve my use of exceptions, and found the important distinction between exceptions that signify programming errors (e.g. someone passed null as argument, or called a method on an object after it was disposed) and those that signify a failure in the operation that is not the caller's fault (e.g. an I/O exception). As far as I understand, it makes little sense for an immediate caller to actually handle programming error exceptions, he should instead assure that the preconditions are met. Only "outer" exception handlers at task boundaries should catch them, so they can keep the system running if a task fails. In order to ensure that client code can cleanly catch "failure" exceptions without catching error exceptions by mistake, I create my own exception classes for all failure exceptions now, and document them in the methods that throw them. I would make them checked exceptions in Java. Now I have a few questions: Before, I tried to document all exceptions that a method could throw, but that sometimes creates an unwiedly list that needs to be documented in every method up the call chain until you can show that the error won't happen. Instead, I document the preconditions in the summary / parameter descriptions and don't even mention what happens if they are not met. The idea is that people should not try to catch these exceptions explicitly anyway, so there is no need to document their types. Would you agree that this is enough? Going further, do you think all preconditions even need to be documented for every method? For example, calling methods in IDisposable objects after calling Dispose is an error, but since IDisposable is such a widely used interface, can I just assume a programmer will know this? A similar case is with reference type parameters where passing null makes no conceivable sense: Should I document "non-null" anyway? IMO, documentation should only cover things that are not obvious, but I am not sure where "obvious" ends.

  Read the article

• receiving "command not found" error messages after fresh reinstall of Lubuntu 14.04

  - by user236378

  Lubuntu 14.04 was working really great. . .until I messed up and had to do a complete fresh reinstall. Now I receive error messages when I input commands into the Terminal, even after immediately completing the fresh install. For example I type: sudo leafpad ?/etc/default/ or sudo leafpad ?/etc/default/grub I get: sudo: leafpad: command not found I type: sudo update-initramfs ?-u or sudo update-grub I get: sudo: update-initramfs: command not found or sudo: update-grub: command not found If I use the command mkdir I get: mkdir: command not found I also get this same exact error message, command not found, with sudo apt-get and wget In other words I can't do anything that I was able to do when inputting commands into the terminal. So I cannot add any repositories or update anything at all. I am not really sure what is causing the problem(s). It appeared to me that Lubuntu installed and booted up OK. However just as soon as I enter anything into the Terminal I immediately get the above error messages. I have tried to do the reinstall three times, same error messages. If anyone can suggest any fixes I would really appreciate it very much. Thank you!

  Read the article

• Kubuntu apt-get -f install error

  - by ShaggyInjun

  I am seeing an error while running apt-get -f install. Can somebody help me out .. venkat@ubuntu:~/Downloads$ sudo apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: libjack-jackd2-0 Suggested packages: jackd2 The following packages will be upgraded: libjack-jackd2-0 1 upgraded, 0 newly installed, 0 to remove and 256 not upgraded. 109 not fully installed or removed. Need to get 0 B/197 kB of archives. After this operation, 3,072 B of additional disk space will be used. Do you want to continue [Y/n]? Y (Reading database ... 274641 files and directories currently installed.) Preparing to replace libjack-jackd2-0 1.9.8~dfsg.1-1ubuntu1 (using .../libjack-jackd2- 0_1.9.8~dfsg.2-1precise1_amd64.deb) ... Unpacking replacement libjack-jackd2-0 ... dpkg: error processing /var/cache/apt/archives/libjack-jackd2-0_1.9.8~dfsg.2- 1precise1_amd64.deb (--unpack): './usr/share/doc/libjack-jackd2-0/buildinfo.gz' is different from the same file on the system dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/libjack-jackd2-0_1.9.8~dfsg.2-1precise1_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Zend_Validate_Abstract custom validator not displaying correct error messages.

  - by Jeremy Dowell

  I have two text fields in a form that I need to make sure neither have empty values nor contain the same string. The custom validator that I wrote extends Zend_Validate_Abstract and works correctly in that it passes back the correct error messages. In this case either: isEmpty or isMatch. However, the documentation says to use addErrorMessages to define the correct error messages to be displayed. in this case, i have attached ->addErrorMessages(array("isEmpty"=>"foo", "isMatch"=>"bar")); to the form field. According to everything I've read, if I return "isEmpty" from isValid(), my error message should read "foo" and if i return "isMatch" then it should read "bar". This is not the case I'm running into though. If I return false from is valid, no matter what i set $this-_error() to be, my error message displays "foo", or whatever I have at index[0] of the error messages array. If I don't define errorMessages, then I just get the error code I passed back for the display and I get the proper one, depending on what I passed back. How do I catch the error code and display the correct error message in my form? The fix I have implemented, until I figure it out properly, is to pass back the full message as the errorcode from the custom validator. This will work in this instance, but the error message is specific to this page and doesn't really allow for re-use of code. Things I have already tried: I have already tried validator chaining so that my custom validator only checks for matches: ->setRequired("true") ->addValidator("NotEmpty") ->addErrorMessage("URL May Not Be Empty") ->addValidator([*customValidator]*) ->addErrorMessage("X and Y urls may not be the same") But again, if either throws an error, the last error message to be set displays, regardless of what the error truly is. I'm not entirely sure where to go from here. Any suggestions?

  Read the article

• Getting bizarre "expected primary-expression" error.

  - by Fecal Brunch

  Hi, I'm getting a really strange error when making a method call: /* input.cpp */ #include <ncurses/ncurses.h> #include "input.h" #include "command.h" Input::Input () { raw (); noecho (); } Command Input::next () { char input = getch (); Command nextCommand; switch (input) { case 'h': nextCommand.setAction (ACTION_MOVELEFT); break; case 'j': nextCommand.setAction (ACTION_MOVEDOWN); break; case 'k': nextCommand.setAction (ACTION_MOVEUP); break; case 'l': nextCommand.setAction (ACTION_MOVERIGHT); break; case 'y': nextCommand.setAction (ACTION_MOVEUPLEFT); break; case 'u': nextCommand.setAction (ACTION_MOVEUPRIGHT); break; case 'n': nextCommand.setAction (ACTION_MOVEDOWNLEFT); break; case 'm': nextCommand.setAction (ACTION_MOVEDOWNRIGHT); break; case '.': nextCommand.setAction (ACTION_WAIT); break; } return nextCommand; } and the error: Administrator@RHYS ~/code/rogue2 $ make g++ -c -Wall -pedantic -g3 -O0 input.cpp input.cpp: In member function `Command Input::next()': input.cpp:21: error: expected primary-expression before '=' token input.cpp:24: error: expected primary-expression before '=' token input.cpp:27: error: expected primary-expression before '=' token input.cpp:30: error: expected primary-expression before '=' token input.cpp:33: error: expected primary-expression before '=' token input.cpp:36: error: expected primary-expression before '=' token input.cpp:39: error: expected primary-expression before '=' token input.cpp:42: error: expected primary-expression before '=' token input.cpp:45: error: expected primary-expression before '=' token make: *** [input.o] Error 1 Sorry about the lack of linenumbers, the errors occur on the lines "nextCommand.setAction(...)", which is totally bizarre considering that they don't contain a '='. Any ideas? Thanks, Rhys

  Read the article

• Inserting an element within jQuery Validation plugin's error template

  - by simshaun

  I'm utilizing the jQuery Validation plugin for my form. It lets you change the errorElement and wrap the errorElement using with the wrapper option. But, I want to insert an element within errorElement like this: <label class="error"><em></em>Error message goes here</label> Is there an easy way to accomplish inserting the em tag? I've tried prepending the em tag using the errorPlacement option (see below), but it seems the plugin is replacing the contents of errorElement afterwards. $.validator.setDefaults({ errorPlacement: function(error, element) { error.prepend('<em/>'); error.insertBefore(element); } }); I've also tried prepending the em tag using the showErrors option (see below). Again, it seems the plugin is replacing the contents of errorElement afterwards. $.validator.setDefaults({ showErrors: function(errorMap, errorList) { for (var i = 0; i < errorList.length; i++) { var error = errorList[i], $label = this.errorsFor(error.element), $element = $(error.element); if ($label.length && $label.find('em').length == 0) { $label.prepend('<em/>'); } } this.defaultShowErrors(); } }); I've also tried modifying the plugin so that when the error element is generated, the <em> tag is prepended. That works until I focus on a form element that has an error, after which the em tag is removed. (It's doing this because jQuery validation is constantly updating the contents of the error element as I focus and/or type in the field, therefore erasing my em tag added at error-element creation.)

  Read the article

• Windows Recovery from Grub messed up my computer?

  - by Hudson Worden

  Ok so I'm a noob when it comes to Operating Systems and I think I really messed up this time. So I have a laptop that dual boots Windows 7 and Linux Mint 11. I was trying to boot into Windows 7 but it would just have a black screen with a blinking cursor. So I turned off my computer and tried again. Still a black screen with a cursor. So I thought "well it must be broken somehow and I remembered seeing something like 'Windows Recovery' from the boot menu so I should try it." So when I turned on my computer a third time I selected 'Windows Recovery' (Something like that I can't remember exactly what it was called). After I had selected that I got a white Windows window that said in big red letters "ERROR". I turned off my computer again a turned it back on expecting the Grub menu to reappear. I was wrong. Instead I am greeted with error: no such partition grub rescue. Then I put in a live CD for ubuntu 11.04 and tried looking at my partitions using the disk manager. Looking at my partitions I notice that there isn't a Linux partition anymore and in its place is a unallocated space partition yet the Linux Swap partition is still there. My windows partition is still fine and I can access the files in it. If you understand what has happened, is there anyway I can get my files back? I don't care about reinstalling the OS again. I just want those files that are in the Linux Mint partition.

  Read the article

• Failed upgrade of PHP on Ubunutu 12.04, error: Sub-process /usr/bin/dpkg returned an error code (1)

  - by DanielAttard

  I just tried to upgrade my version of PHP on Ubuntu 12.04 and now I have messed it up. First I did this: sudo add-apt-repository ppa:ondrej/php5-oldstable Then I did this: sudo apt-get update Then finally I did this: sudo apt-get install php5 And now I am getting an error message about Sub-process /usr/bin/dpkg returned an error code (1) What have I done wrong? How can I fix this problem? Thanks. Here are the errors received: Do you want to continue [Y/n]? Y debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Resource temporarily unavailable Setting up libapache2-mod-php5 (5.4.28-1+deb.sury.org~precise+1) ... debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Resource temporarily unavailable dpkg: error processing libapache2-mod-php5 (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Setting up php5-cli (5.4.28-1+deb.sury.org~precise+1) ... debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Resource temporarily unavailable dpkg: error processing php5-cli (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of php5-curl: php5-curl depends on phpapi-20100525+lfs; however: Package phpapi-20100525+lfs is not installed. Package libapache2-mod-php5 which provides phpapi-20100525+lfs is not configured yet. Package php5-cli which provides phpapi-20100525+lfs is not configured yet. dpkg: error processing php5-curl (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of php5-gd: php5-gd depends on phpapi-20100525+lfs; however: Package phpapi-20100525+lfs is not installed. Package libapache2-mod-php5 which provides phpapi-20100525+lfs is not configured yet. Package php5-cli which provides phpapi-20100525+lfs is not configured yet. dpkg: error processing php5-gd (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of php5-mcrypt: php5-mcrypt depends on phpapi-20100525+lfs; however: Package phpapi-20100525+lfs is not installed. Package libapache2-mod-php5 which provides phpapi-20100525+lfs is not configured yet. Package php5-cli which provides phpapi-20100525+lfs is not configured yet. dpkg: error processing php5-mcrypt (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of php5-mysql: php5-mysql depends on phpapi-20100525+lfs; however: Package phpapi-20100525+lfs is not installed. Package libapache2-mod-php5 which provides phpapi-20100525+lfs is not configured yet. Package php5-cli which provides phpapi-20100525+lfs is not configured yet. dpkg: error processing php5-mysql (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of php5: php5 depends on libapache2-mod-php5 (>= 5.4.28-1+deb.sury.org~precise+1) | libapache2-mod-php5filter (>= 5.4.28-1+deb.sury.org~precise+1) | php5-cgi (>= 5.4.28-1+deb.sury.org~precise+1) | php5-fpm (>= 5.4.28-1+deb.sury.org~precise+1); however: Package libapache2-mod-php5 is not configured yet. Package libapache2-mod-php5filter is not installed. Package php5-cgi is not installed. Package php5-fpm is not installed. dpkg: error processing php5 (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: libapache2-mod-php5 php5-cli php5-curl php5-gd php5-mcrypt php5-mysql php5 E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Php code not executing - dies out when trying to create an object of class - no error displayed

  - by Ali

  I'm having some problems with this piece of code. I've included a class declaration and trying to create an object of that class but my code dies out. It doesn't seem to be an include issue as all the files are being included even the files called for inclusion within the class file itself. However the object is not created - I tried to put an echo statement in the __construct function but nothing it just doesn't run infact doesn't create the object and the code won't continue from there - plus no error is reported or displayed and I have error reporting set to E_ALL and display errors set to true WHats happening here :(

  Read the article

• Uploading image file from website on yahoo server causes 410 gone error message when trying to acces

  - by creocare

  I have a form that lets users upload a photo of themselves. This seems to work. The photo does exist on the server once uploaded. When I try to access the file I get a "403 forbidden - you don't have permission to access this url on this sever" and also I get "Additionally, a 410 Gone error was encountered while trying to use an ErrorDocument to handle the request." This is the code I have for uploading the image. $target_path = "images/"; $target_path = $target_path . basename( $_FILES['uploadpic']['name']); if(move_uploaded_file($_FILES['uploadpic']['tmp_name'], $target_path)) { echo "The file ". basename( $_FILES['uploadpic']['name']). " has been uploaded"; } else { echo "There was an error uploading the file, please try again!"; }

  Read the article

• What is Error 324? Is it related to Google Chrome? Or Verizon Webmail?

  - by Jason Rhodes

  My in-laws are having trouble with signing into their Verizon Webmail account at webmail.verizon.net, only when they are on their wireless network. When they try to log in from wireless they get "Error 324" in the browser, in both Google Chrome AND IE8. But they can access any other site, and they can get on their Verizon email when they plug in directly to the browser. Does anyone know why this is?

  Read the article

• Python: saving objects and using pickle. Error using pickle.dump

  - by Peterstone

  Hello I have an Error and I don´t the reason: >>> class Fruits:pass ... >>> banana = Fruits() >>> banana.color = 'yellow' >>> banana.value = 30 >>> import pickle >>> filehandler = open("Fruits.obj",'w') >>> pickle.dump(banana,filehandler) Traceback (most recent call last): File "<stdin>", line 1, in <module> File "C:\Python31\lib\pickle.py", line 1354, in dump Pickler(file, protocol, fix_imports=fix_imports).dump(obj) TypeError: must be str, not bytes >>> I don´t know how to solve this error because I don´t understand it. Thank you so much.

  Read the article

• PHP Error, is it resolvable, or a language bug?

  - by rls

  Given the following code $c= new SoapClient('http://www.webservicex.net/CurrencyConvertor.asmx?WSDL'); $usa = "USD"; $eng = "GBP"; doing a __getTypes on the client gives me Array ( [0] => struct ConversionRate { Currency FromCurrency; Currency ToCurrency; } [1] => string Currency [2] => struct ConversionRateResponse { double ConversionRateResult; } ) if i then do $calculation = $c->ConversionRate($usa, $eng); and print calculation i get an error about Catchable fatal error: Object of class stdClass could not be converted to string Is there a specific way i should be printing this out, or i it a bug, from researching / googling many people seem to have a problem but i cant find a suitbale solution, other than downgrading php, which isnt a solution for me as i am doing this as homework and its running off of a college server

  Read the article

• Deleting a database row with mysql - getting an error!?

  - by Nike

  Here's the code: mysql_query("DELETE " . $_GET['id'] . " FROM forum_favorites WHERE thread_id='" . $_GET['id'] . "' AND user='" . $userinfo['username'] . "'") or die(mysql_error()); And the error message: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '77 FROM forum_favorites WHERE thread_id='77' AND user='nike1'' at line 1 Anyone knows what's up here? I've been stuck here for hours now and i just can't figure out what the heck's wrong? The database name and the column names are correct. Thanks. -Nike

  Read the article

• jQuery ajax is throwing an error code 302... what is this?

  - by AndreMiranda

  Hi everyone! I'm working with ASP.NET MVC and jQuery and I have a UserControl that is repeated in every page. And in every page request, a ajax callback occurs... so far so good. But this is when I'm in localhost. When I publish the site, I notice that this ajax is throwing an error 302, but this only occus in HTTPS pages and in FF and Chrome... on IE this ajax request works fine. What is this error 302? Why it only occurs on https pages and only in FF or chrome? thank you all!!

  Read the article

• IIS6 + PHP + FastCGI 500 Errors - Where do I start looking?

  - by Bertvan

  I've set up IIS6 with FastCGI to use php-cgi.exe. I have some php websites by external parties, that I'm trying to run in a test environment. One of the websites just plain gives me a FastCGI Error Page. Is there some way to enable logging somewhere so that I can get a bit more information on this problem? I have looked in - Eventlog - IIS Website log (c:\windows\system32\Logfiles) - PHP log But no results, except the IIS Website log mentions a return of a 500 page. Is there any other way to debug/check where things might be going wrong? Here is what the page looks like: FastCGI Error The FastCGI Handler was unable to process the request. Error Details: The FastCGI process exited unexpectedly Error Number: -1073741571 (0xc00000fd). Error Description: Unknown Error HTTP Error 500 - Server Error. Internet Information Services (IIS)

  Read the article

• VS 2010 Entity Repository Error Class member EntityBase.id is unmapped.

  - by Steve

  In my project I have it set up so that all the tables in the DB has the property "id" and then I have the entity objects inherit from the EntityBase class using a repository pattern. I then set the inheritance modifier for "id" property in the dbml file o/r designer to "overrides" Public MustInherit Class EntityBase MustOverride Property id() As Integer End Class Public MustInherit Class RepositoryBase(Of T As EntityBase) Protected _Db As New DataClasses1DataContext Public Function GetById(ByVal Id As Integer) As T Return (From a In _Db.GetTable(Of T)() Where a.id = Id).SingleOrDefault End Function End Class Partial Public Class Entity1 Inherits EntityBase End Class Public Class TestRepository Inherits RepositoryBase(Of Entity1) End Class the line Return (From a In _Db.GetTable(Of T)() Where a.id = Id).SingleOrDefault however produces the error "Class member EntityBase.id is unmapped" when i use VS 2010 using the 4.0 framework but I never received that error with the old one. Any help would be greatly appreciated. Thanks in advance.

  Read the article

• Does SQL Server 2005 error message numbers back to the asp.net application?

  - by Duke

  I'd like to get the message number and severity level information from SQL Server upon execution of an erroneous query. For example, when a user attempts to delete a row being referenced by another record, and the cascade relationship is "no action", I'd like the application to be able to check for error message 547 ("The DELETE statement conflicted with the REFERENCE constraint...") and return a user friendly and localized message to the user. When running such a query directly on SQL Server, the following message is printed: Msg 547, Level 16, State 0, Line 1 <Error message...> In an Asp.Net app is this information available in an event handler parameter or elsewhere? Also, I don't suppose anyone knows where I can find a definitive reference of SQL Server message numbers?

  Read the article

• How to append to an XML response an error attribute using Ruby on Rails 3?

  - by user502052

  I am trying to implement REST APIs, so in my RoR3 application I have XML responses. Before to pass to a consumer the XML, I wuold like to check if there are errors and, if so, send back a response with error messages. I read "Active Record Validations and Callbacks" guides on the RoR website, but it seems not work in my case. I extract from the database a resource doing @response = User.find_by_id(1) and I wuold like, if possible, to add error to it. Seeing some examples I have seen how to report errors in an XML file format.xml { render :xml => @response.errors } but how I can add append new errors to the @response? Maybe something like this: errors.add(:password, "is invalid")

  Read the article

• How to run BoundsChecker suite for Error Detection for VC projects from command line?

  - by Bhanu

  How to run BoundsChecker suite for Error Detection for VC projects from command line?

  Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >