Search Results

Search found 8371 results on 335 pages for 'inline block'.

Page 65/335 | < Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >

  • hosts.deny not blocking ip addresses

    - by Jamie
    I have the following in my /etc/hosts.deny file # # hosts.deny This file describes the names of the hosts which are # *not* allowed to use the local INET services, as decided # by the '/usr/sbin/tcpd' server. # # The portmap line is redundant, but it is left to remind you that # the new secure portmap uses hosts.deny and hosts.allow. In particular # you should know that NFS uses portmap! ALL:ALL and this in /etc/hosts.allow # # hosts.allow This file describes the names of the hosts which are # allowed to use the local INET services, as decided # by the '/usr/sbin/tcpd' server. # ALL:xx.xx.xx.xx , xx.xx.xxx.xx , xx.xx.xxx.xxx , xx.x.xxx.xxx , xx.xxx.xxx.xxx but i am still getting lots of these emails: Time: Thu Feb 10 13:39:55 2011 +0000 IP: 202.119.208.220 (CN/China/-) Failures: 5 (sshd) Interval: 300 seconds Blocked: Permanent Block Log entries: Feb 10 13:39:52 ds-103 sshd[12566]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=202.119.208.220 user=root Feb 10 13:39:52 ds-103 sshd[12567]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=202.119.208.220 user=root Feb 10 13:39:52 ds-103 sshd[12568]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=202.119.208.220 user=root Feb 10 13:39:52 ds-103 sshd[12571]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=202.119.208.220 user=root Feb 10 13:39:53 ds-103 sshd[12575]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=202.119.208.220 user=root whats worse is csf is trying to auto block these ip's when the attempt to get in but although it does put ip's in the csf.deny file they do not get blocked either So i am trying to block all ip's with /etc/hosts.deny and allow only the ip's i use with /etc/hosts.allow but so far it doesn't seem to work. right now i'm having to manually block each one with iptables, I would rather it automatically block the hackers in case I was away from a pc or asleep

    Read the article

  • Linux - real-world hardware RAID controller tuning (scsi and cciss)

    - by ewwhite
    Most of the Linux systems I manage feature hardware RAID controllers (mostly HP Smart Array). They're all running RHEL or CentOS. I'm looking for real-world tunables to help optimize performance for setups that incorporate hardware RAID controllers with SAS disks (Smart Array, Perc, LSI, etc.) and battery-backed or flash-backed cache. Assume RAID 1+0 and multiple spindles (4+ disks). I spend a considerable amount of time tuning Linux network settings for low-latency and financial trading applications. But many of those options are well-documented (changing send/receive buffers, modifying TCP window settings, etc.). What are engineers doing on the storage side? Historically, I've made changes to the I/O scheduling elevator, recently opting for the deadline and noop schedulers to improve performance within my applications. As RHEL versions have progressed, I've also noticed that the compiled-in defaults for SCSI and CCISS block devices have changed as well. This has had an impact on the recommended storage subsystem settings over time. However, it's been awhile since I've seen any clear recommendations. And I know that the OS defaults aren't optimal. For example, it seems that the default read-ahead buffer of 128kb is extremely small for a deployment on server-class hardware. The following articles explore the performance impact of changing read-ahead cache and nr_requests values on the block queues. http://zackreed.me/articles/54-hp-smart-array-p410-controller-tuning http://www.overclock.net/t/515068/tuning-a-hp-smart-array-p400-with-linux-why-tuning-really-matters http://yoshinorimatsunobu.blogspot.com/2009/04/linux-io-scheduler-queue-size-and.html For example, these are suggested changes for an HP Smart Array RAID controller: echo "noop" > /sys/block/cciss\!c0d0/queue/scheduler blockdev --setra 65536 /dev/cciss/c0d0 echo 512 > /sys/block/cciss\!c0d0/queue/nr_requests echo 2048 > /sys/block/cciss\!c0d0/queue/read_ahead_kb What else can be reliably tuned to improve storage performance? I'm specifically looking for sysctl and sysfs options in production scenarios.

    Read the article

  • Blocking ICMP outgoing requests only in eth1

    - by Raj
    I am creating a NAT with iptables: Computer A: eth0 (dhcp) + eth1 (static ip 192.168.0.1 - gateway) Computer B: eth1 (static ip 192.168.0.2, using Computer A as gateway) I know how to block ICMP outgoing requests (-A OUTPUT -p icmp --icmp-type echo-request -j DROP), but that would block ICMP requests from Computer A, but not from Computer B (in fact, only for Computer A - Computer B can keep doing those). I tried with the same command, but adding -o eth1, but that does not block at all. Any idea?

    Read the article

  • How can I combine code from an old revision when I didn't branch in TortoiseMerge?

    - by gr33d
    I need to combine (merge?) some parts of an old revision with a newer revision of a file. I'm still pretty new to subversion, so I'm not sure what I'll bomb in the process. I did not branch--these are simply different revisions of a file. How do I send the sections of code from r1 to r3 where they are needed. The keyboard shortcuts and menu options for "theirs", "mine", "left block", "right block", etc aren't very intuitive. If I need 5 blocks from r1 to be after the first 10 blocks of r3, how do I do it? Shouldn't I be able to go through r1 block by block and decide if and where it belongs in r3? Thanks in advance!

    Read the article

  • Nginx: Maintenance page and localhost access

    - by ian.evans
    As I prepare to test some changes, I thought I'd set up a maintenance page block so I could do the testing. Just realized though that the maintenance block examples for nginx take the site down for everyone. How do you serve the maintenance page to visitors will still allowing localhost access. Should I just create a new server block listening on another port and deny all, allow 127.0.0.1?

    Read the article

  • Why change net.inet.tcp.tcbhashsize in FreeBSD?

    - by sh-beta
    In virtually every FreeBSD network tuning document I can find: # /boot/loader.conf net.inet.tcp.tcbhashsize=4096 This is usually paired with some unhelpful statement like "TCP control-block hash table tuning" or "Set this to a reasonable value." man 4 tcp isn't much help either: tcbhashsize Size of the TCP control-block hash table (read-only). This may be tuned using the kernel option TCBHASHSIZE or by setting net.inet.tcp.tcbhashsize in the loader(8). The only document I can find that touches on this mysterious thing is the Protocol Control Block Lookup subsection beneath Transport Layer in Optimizing the FreeBSD IP and TCP Stack, but its description is more about potential bottlenecks in using it. It seems tied to matching new TCP segments to their listening sockets, but I'm not sure how. What exactly is the TCP Control Block used for? Why would you want to set its hash size to 4096 or any other particular number?

    Read the article

  • Looking for a new, free firewall (Sunbelt has a huge hole)

    - by Jason
    I've been using Sunbelt Personal Firewall v. 4.5 (previously Kerio). I've discovered that blocking Firefox connections in the configuration doesn't stop EXISTING Firefox connections. (See my post here yesterday http://superuser.com/questions/132625/sunbelt-firewall-4-5-wont-block-firefox) The "stop all traffic" may work on existing connections - but I'm done testing, as I need to be able to be selective, at any time. I was using the free version, so the "web filtering" option quit working after some time (mostly blocking ads and popups), but I didn't use that anyway. I used the last free version of Kerio before finally having to go to Sunbelt, because Kerio had an unfixed bug where you'd eventually get the BSOD and have to reset Kerio's configuration and start over (configure everything again). So I'm looking for a new Firewall. I don't like ZoneAlarm at all (no offense to all it's users that may be here - personal taste). I need the following: (Sunbelt has all these, except *) - 1. Be able to block in/out to localhost (trusted)/internet selectively for each application with a click (so there's 4 click boxes for each application) [*that effects everything immediately, regardless of what's already connected]. When a new application attempts a connection, you get an allow/deny/remember windows. - 2. Be able to easily set up filter rules for 'individual application'/'all applications,' by protocol, port/address (range), local, remote, in, out. [*Adding a filter rule also doesn't block existing connections in Sunbelt. That needs to work too.] - 3. Have an easy-to-get-to way to "stop all traffic" (like a right click option on the running icon in the task bar). - 4. Be able to set trusted/internet in/out block/allowed (4 things per item) for each of IGMP, ping, DNS, DHCP, VPN, and broadcasts. - 5. Define locahost as trusted/untrusted, define adapter connections as trusted/untrusted. - 6. Block incoming connetions during boot-up and shutdown. - 7. Show existing connections, including local & remote ip/port, protocol, current speed, total bytes transferred, and local ports opened for Listening. - 8. An Intrusion Prevention System which blocks (optionally select each one) known intrustions (long list). - 9. Block/allow applications from starting other applications (deny/allow/remember window). Wish list: A way of knowing what svchost.exe is doing - who is actually using it/calling it. I allowed it for localhost, and selectively allowed it for internet each time the allow/deny window came up. Thanks for any help/suggestions. (I'm using Windows XP SP3.)

    Read the article

  • Nginx Multiple If Statements Cause Memory Usage to Jump

    - by Justin Kulesza
    We need to block a large number of requests by IP address with nginx. The requests are proxied by a CDN, and so we cannot block with the actual client IP address (it would be the IP address of the CDN, not the actual client). So, we have $http_x_forwarded_for which contains the IP which we need to block for a given request. Similarly, we cannot use IP tables, as blocking the IP address of the proxied client will have no effect. We need to use nginx to block the requested based on the value of $http_x_forwarded_for. Initially, we tried multiple, simple if statements: http://pastie.org/5110910 However, this caused our nginx memory usage to jump considerably. We went from somewhere around a 40MB resident size to over a 200MB resident size. If we changed things up, and created one large regex that matched the necessary IP addresses, memory usage was fairly normal: http://pastie.org/5110923 Keep in mind that we're trying to block many more than 3 or 4 IP addresses... more like 50 to 100, which may be included in several (20+) nginx server configuration blocks. Thoughts? Suggestions? I'm interested both in why memory usage would spike so greatly using multiple if blocks, and also if there are any better ways to achieve our goal.

    Read the article

  • why vim script change inside visual area not work?

    - by avalan_che
    Say a webpage like this: ... <div class="block"> <p>...</p> <p>...</p> </div> <p>...</p> ... I tried to add class="cls" to <p>s inside <div class="block">, so I did: while search('div class="block"','W') 0 normal vat '<,'>s@<p@<p class="cls"@gec endw but this wouldn't work as expected: those <ps outside <div class="block" got changed too. In command window these lines totally work, why not putting together?

    Read the article

  • Informaton of pendriver with libudv on linux

    - by Catanzaro
    I'm doing a little app in C that read the driver information of my pendrive: Plugged it and typed dmesg: [ 7676.243994] scsi 7:0:0:0: Direct-Access Lexar USB Flash Drive 1100 PQ: 0 ANSI: 0 CCS [ 7676.248359] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 7676.256733] sd 7:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB) [ 7676.266559] sd 7:0:0:0: [sdb] Write Protect is off [ 7676.266566] sd 7:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 7676.266569] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 7676.285373] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 7676.285383] sdb: sdb1 [ 7676.298661] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 7676.298667] sd 7:0:0:0: [sdb] Attached SCSI removable disk with "udevadm info -q all -n /dev/sdb" P: /devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/1-1:1.0/host7/target7:0:0/7:0:0:0/block/sdb N: sdb W: 36 S: block/8:16 S: disk/by-id/usb-Lexar_USB_Flash_Drive_AA5OCYQII8PSQXBB-0:0 S: disk/by-path/pci-0000:02:03.0-usb-0:1:1.0-scsi-0:0:0:0 E: UDEV_LOG=3 E: DEVPATH=/devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/1-1:1.0/host7/target7:0:0/7:0:0:0/block/sdb E: MAJOR=8 E: MINOR=16 E: DEVNAME=/dev/sdb E: DEVTYPE=disk E: SUBSYSTEM=block E: ID_VENDOR=Lexar E: ID_VENDOR_ENC=Lexar\x20\x20\x20 E: ID_VENDOR_ID=05dc E: ID_MODEL=USB_Flash_Drive E: ID_MODEL_ENC=USB\x20Flash\x20Drive\x20 E: ID_MODEL_ID=a813 E: ID_REVISION=1100 E: ID_SERIAL=Lexar_USB_Flash_Drive_AA5OCYQII8PSQXBB-0:0 E: ID_SERIAL_SHORT=AA5OCYQII8PSQXBB E: ID_TYPE=disk E: ID_INSTANCE=0:0 E: ID_BUS=usb E: ID_USB_INTERFACES=:080650: E: ID_USB_INTERFACE_NUM=00 E: ID_USB_DRIVER=usb-storage E: ID_PATH=pci-0000:02:03.0-usb-0:1:1.0-scsi-0:0:0:0 E: ID_PART_TABLE_TYPE=dos E: UDISKS_PRESENTATION_NOPOLICY=0 E: UDISKS_PARTITION_TABLE=1 E: UDISKS_PARTITION_TABLE_SCHEME=mbr E: UDISKS_PARTITION_TABLE_COUNT=1 E: DEVLINKS=/dev/block/8:16 /dev/disk/by-id/usb-Lexar_USB_Flash_Drive_AA5OCYQII8PSQXBB-0:0 /dev/disk/by-path/pci-0000:02:03.0-usb-0:1:1.0-scsi-0:0:0:0 and my software is: Codice: Seleziona tutto #include <stdio.h> #include <libudev.h> #include <stdlib.h> #include <locale.h> #include <unistd.h> int main(void) { struct udev_enumerate *enumerate; struct udev_list_entry *devices, *dev_list_entry; struct udev_device *dev; /* Create the udev object */ struct udev *udev = udev_new(); if (!udev) { printf("Can't create udev\n"); exit(0); } enumerate = udev_enumerate_new(udev); udev_enumerate_add_match_subsystem(enumerate, "scsi_generic"); udev_enumerate_scan_devices(enumerate); devices = udev_enumerate_get_list_entry(enumerate); udev_list_entry_foreach(dev_list_entry, devices) { const char *path; /* Get the filename of the /sys entry for the device and create a udev_device object (dev) representing it */ path = udev_list_entry_get_name(dev_list_entry); dev = udev_device_new_from_syspath(udev, path); /* usb_device_get_devnode() returns the path to the device node itself in /dev. */ printf("Device Node Path: %s\n", udev_device_get_devnode(dev)); /* The device pointed to by dev contains information about the hidraw device. In order to get information about the USB device, get the parent device with the subsystem/devtype pair of "usb"/"usb_device". This will be several levels up the tree, but the function will find it.*/ dev = udev_device_get_parent_with_subsystem_devtype( dev, "block", "disk"); if (!dev) { printf("Errore\n"); exit(1); } /* From here, we can call get_sysattr_value() for each file in the device's /sys entry. The strings passed into these functions (idProduct, idVendor, serial, etc.) correspond directly to the files in the directory which represents the USB device. Note that USB strings are Unicode, UCS2 encoded, but the strings returned from udev_device_get_sysattr_value() are UTF-8 encoded. */ printf(" VID/PID: %s %s\n", udev_device_get_sysattr_value(dev,"idVendor"), udev_device_get_sysattr_value(dev, "idProduct")); printf(" %s\n %s\n", udev_device_get_sysattr_value(dev,"manufacturer"), udev_device_get_sysattr_value(dev,"product")); printf(" serial: %s\n", udev_device_get_sysattr_value(dev, "serial")); udev_device_unref(dev); } /* Free the enumerator object */ udev_enumerate_unref(enumerate); udev_unref(udev); return 0; } the problem is that i obtain in output: Device Node Path: /dev/sg0 Errore and dont view information. subsystem and the devtype i think that are inserted well : "block" and "disk". thanks for help. Bye

    Read the article

  • Nested/multiple brace-matching in Notepad++

    - by Melodic
    In Notepad++, is it possible to force all (or at least the 3 or 4 deepest) pairs of braces/brackets/parens/etc. that enclose the cursor to become highlighted? Preferably in different colors for each matched pair? For instance, in this example: int main(char** args) { if(blah) { ... } } If we place the cursor anywhere in the if-block, the main function's opening and closing braces should become one color, while the if-block's braces become another. The coloring for each block should stay the same as long the cursor is still in that block.

    Read the article

  • Nginx rewrites - When does one use the break flag (pattern target break)?

    - by anonymous-one
    The nginx wiki states: break - completes processing of current rewrite directives and non-rewrite processing continues within the current location block only. Is this to say that: If the rewrite pattern matches, process the rewrite (rewrite to target) but do not process any of the other rules in the location block, and process all other (cache, proxy, etc) directives in the location block? I am talking about the break flag as per: PATTERN TARGET FLAG Not the "break;" directive. Thanks.

    Read the article

  • 'undefined method init for Mysql:Class'

    - by sscirrus
    I've been having problems with a MySQL Server installation that got messed up after a power outage. Configuration Intel i5 Mac running OS X 10.6.5 Ruby 1.9.2 installed Rails 3.0.1 installed MySQL Server (finally) installed and running I completely reinstalled MySQL, which deleted the local development/test/production databases. So, I have run create database development; in MySQL to get the dev database ready for a migration. Current Goal Run rake db:migrate to get my databases back again. (I cannot currently access my databases or Mysql at all from Rails.) Error Using the gem 'mysql', '2.8.1' and run rake db:migrate, I get the error: rake aborted! undefined method 'init' for Mysql:Class Stack Trace: /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/activerecord-3.0.1/lib/active_record/connection_adapters/mysql_adapter.rb:30:in 'mysql_connection' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/activerecord-3.0.1/lib/active_record/connection_adapters/abstract/connection_pool.rb:230:in 'new_connection' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/activerecord-3.0.1/lib/active_record/connection_adapters/abstract/connection_pool.rb:238:in 'checkout_new_connection' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/activerecord-3.0.1/lib/active_record/connection_adapters/abstract/connection_pool.rb:194:in 'block (2 levels) in checkout' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/activerecord-3.0.1/lib/active_record/connection_adapters/abstract/connection_pool.rb:190:in 'loop' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/activerecord-3.0.1/lib/active_record/connection_adapters/abstract/connection_pool.rb:190:in 'block in checkout' /Users/sscirrus/.rvm/rubies/ruby-1.9.2-p0/lib/ruby/1.9.1/monitor.rb:201:in 'mon_synchronize' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/activerecord-3.0.1/lib/active_record/connection_adapters/abstract/connection_pool.rb:189:in 'checkout' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/activerecord-3.0.1/lib/active_record/connection_adapters/abstract/connection_pool.rb:96:in 'connection' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/activerecord-3.0.1/lib/active_record/connection_adapters/abstract/connection_pool.rb:318:in 'retrieve_connection' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/activerecord-3.0.1/lib/active_record/connection_adapters/abstract/connection_specification.rb:97:in 'retrieve_connection' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/activerecord-3.0.1/lib/active_record/connection_adapters/abstract/connection_specification.rb:89:in 'connection' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/activerecord-3.0.1/lib/active_record/migration.rb:486:in 'initialize' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/activerecord-3.0.1/lib/active_record/migration.rb:433:in 'new' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/activerecord-3.0.1/lib/active_record/migration.rb:433:in 'up' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/activerecord-3.0.1/lib/active_record/migration.rb:415:in 'migrate' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/activerecord-3.0.1/lib/active_record/railties/databases.rake:142:in 'block (2 levels) in <top (required)>' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/rake-0.8.7/lib/rake.rb:636:in 'call' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/rake-0.8.7/lib/rake.rb:636:in 'block in execute' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/rake-0.8.7/lib/rake.rb:631:in 'each' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/rake-0.8.7/lib/rake.rb:631:in 'execute' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/rake-0.8.7/lib/rake.rb:597:in 'block in invoke_with_call_chain' /Users/sscirrus/.rvm/rubies/ruby-1.9.2-p0/lib/ruby/1.9.1/monitor.rb:201:in 'mon_synchronize' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/rake-0.8.7/lib/rake.rb:590:in 'invoke_with_call_chain' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/rake-0.8.7/lib/rake.rb:583:in 'invoke' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/rake-0.8.7/lib/rake.rb:2051:in 'invoke_task' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/rake-0.8.7/lib/rake.rb:2029:in 'block (2 levels) in top_level' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/rake-0.8.7/lib/rake.rb:2029:in 'each' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/rake-0.8.7/lib/rake.rb:2029:in 'block in top_level' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/rake-0.8.7/lib/rake.rb:2068:in 'standard_exception_handling' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/rake-0.8.7/lib/rake.rb:2023:in 'top_level' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/rake-0.8.7/lib/rake.rb:2001:in 'block in run' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/rake-0.8.7/lib/rake.rb:2068:in 'standard_exception_handling' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/rake-0.8.7/lib/rake.rb:1998:in 'run' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/gems/rake-0.8.7/bin/rake:31:in '<top (required)>' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/bin/rake:19:in 'load' /Users/sscirrus/.rvm/gems/ruby-1.9.2-p0/bin/rake:19:in '<main>'

    Read the article

  • Wordpress blog with Joomla?

    - by user427902
    Hi, I had this Wordpress installation which was installed in a subfolder (not root). Like http: //server/blog/. Now, I installed Joomla on the root (http: //server/). Everything seems to be working fine with the Joomla part. However, the blog part is messed up. If I try to browse the homepage of my blog which is http: //server/blog/ it works like a charm. But while trying to view individual blog pages like say, http: //server/blog/some_category/some_post I get a Joomla 404 page. So, I was wondering if it was possible to use both Wordpress and Joomla in the same server in the setup I am trying to. Let me clarify that I am NOT looking to integrate user login and other such things. I just want the blog to be functional under a subfolder while I run the Joomla site in the root. So, what is the correct way to go about it. Can this be solved by any .config edits or something else? Edit: Here's the .htaccess for Joomla ... (I can't find any .htaccess for Wp though, still looking for it.) ## # @version $Id: htaccess.txt 14401 2010-01-26 14:10:00Z louis $ # @package Joomla # @copyright Copyright (C) 2005 - 2010 Open Source Matters. All rights reserved. # @license http://www.gnu.org/copyleft/gpl.html GNU/GPL # Joomla! is Free Software ## ##################################################### # READ THIS COMPLETELY IF YOU CHOOSE TO USE THIS FILE # # The line just below this section: 'Options +FollowSymLinks' may cause problems # with some server configurations. It is required for use of mod_rewrite, but may already # be set by your server administrator in a way that dissallows changing it in # your .htaccess file. If using it causes your server to error out, comment it out (add # to # beginning of line), reload your site in your browser and test your sef url's. If they work, # it has been set by your server administrator and you do not need it set here. # ##################################################### ## Can be commented out if causes errors, see notes above. Options +FollowSymLinks # # mod_rewrite in use RewriteEngine On ########## Begin - Rewrite rules to block out some common exploits ## If you experience problems on your site block out the operations listed below ## This attempts to block the most common type of exploit `attempts` to Joomla! # ## Deny access to extension xml files (uncomment out to activate) #<Files ~ "\.xml$"> #Order allow,deny #Deny from all #Satisfy all #</Files> ## End of deny access to extension xml files RewriteCond %{QUERY_STRING} mosConfig_[a-zA-Z_]{1,21}(=|\%3D) [OR] # Block out any script trying to base64_encode crap to send via URL RewriteCond %{QUERY_STRING} base64_encode.*\(.*\) [OR] # Block out any script that includes a <script> tag in URL RewriteCond %{QUERY_STRING} (\<|%3C).*script.*(\>|%3E) [NC,OR] # Block out any script trying to set a PHP GLOBALS variable via URL RewriteCond %{QUERY_STRING} GLOBALS(=|\[|\%[0-9A-Z]{0,2}) [OR] # Block out any script trying to modify a _REQUEST variable via URL RewriteCond %{QUERY_STRING} _REQUEST(=|\[|\%[0-9A-Z]{0,2}) # Send all blocked request to homepage with 403 Forbidden error! RewriteRule ^(.*)$ index.php [F,L] # ########## End - Rewrite rules to block out some common exploits # Uncomment following line if your webserver's URL # is not directly related to physical file paths. # Update Your Joomla! Directory (just / for root) # RewriteBase / ########## Begin - Joomla! core SEF Section # RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !^/index.php RewriteCond %{REQUEST_URI} (/|\.php|\.html|\.htm|\.feed|\.pdf|\.raw|/[^.]*)$ [NC] RewriteRule (.*) index.php RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization},L] # ########## End - Joomla! core SEF Section

    Read the article

  • Dual Boot issues with Windows 7 and Ubuntu

    - by Michael
    I'm finding myself in a rather unique situation. I've read through just about every resource I can find about this and while things have helped me understand some background, I haven't yet been able to find a solution. So I'm asking here. I originally had just a Windows 7 64-bit OS installation on my desktop. Learning that I couldn't do anything with Apache, PHP and MySql from within a 64-bit system, I did some research and found out that I could use Ubuntu. I've installed the latest version: 11.04. I created a CD to install Ubuntu from and the install went just fine. I installed it side-by-side with Windows 7. I can boot into Ubuntu just fine through the dual-boot option. When I reboot to load Windows though, the Grub2 list shows Windows 7 (loader) and when I select this option the Windows System Recovery loads instead of the actual OS. I haven't made it past there because I didn't know what to do. I just shut the computer down and rebooted into Ubuntu. I've been working for the last hour and a half to try to figure out how to boot into the Windows 7 OS and I haven't got a clue. While I'm somewhat proficient with Windows 7, I'm totally new to Ubuntu, so if you do know what needs to happen, please keep it simple enough that I'll be able to understand. Thanks for all your help in advance. Here's the results after using the Boot Info Script: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #5 for cbh. => Windows is installed in the MBR of /dev/sdb => Grub 2 is installed in the MBR of /dev/mapper/pdc_bdadcfbdif and looks on the same drive in partition #5 for cbh. sda1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy sda2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy sda3: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy sdb1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: /bootmgr /Boot/BCD sdb2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb3: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: /bootmgr /boot/BCD sdb4: _________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sdb5: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 11.04 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb6: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: pdc_bdadcfbdif1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: /bootmgr /Boot/BCD pdc_bdadcfbdif2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe pdc_bdadcfbdif3: _________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy mount: unknown filesystem type '' =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sda1 * 2,048 206,847 204,800 7 HPFS/NTFS /dev/sda2 206,911 1,440,372,735 1,440,165,825 7 HPFS/NTFS /dev/sda3 1,440,372,736 1,464,856,575 24,483,840 7 HPFS/NTFS Drive: sdb ___________________ _____________________________________________________ Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdb1 * 2,048 206,847 204,800 7 HPFS/NTFS /dev/sdb2 206,911 1,342,554,688 1,342,347,778 7 HPFS/NTFS /dev/sdb3 1,930,344,448 1,953,521,663 23,177,216 7 HPFS/NTFS /dev/sdb4 1,342,556,158 1,930,344,447 587,788,290 5 Extended /dev/sdb5 1,342,556,160 1,896,806,399 554,250,240 83 Linux /dev/sdb6 1,896,808,448 1,930,344,447 33,536,000 82 Linux swap / Solaris Drive: pdc_bdadcfbdif ___________________ _____________________________________________________ Disk /dev/mapper/pdc_bdadcfbdif: 750.0 GB, 749999947776 bytes 255 heads, 63 sectors/track, 91182 cylinders, total 1464843648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/mapper/pdc_bdadcfbdif1 * 2,048 206,847 204,800 7 HPFS/NTFS /dev/mapper/pdc_bdadcfbdif2 206,911 1,440,372,735 1,440,165,825 7 HPFS/NTFS /dev/mapper/pdc_bdadcfbdif3 1,440,372,736 1,464,856,575 24,483,840 7 HPFS/NTFS /dev/mapper/pdc_bdadcfbdif3 ends after the last sector of /dev/mapper/pdc_bdadcfbdif blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/mapper/pdc_bdadcfbdif1 888E54CC8E54B482 ntfs SYSTEM /dev/mapper/pdc_bdadcfbdif2 C2766BF6766BEA1D ntfs OS /dev/mapper/pdc_bdadcfbdif: PTTYPE="dos" /dev/sda1 888E54CC8E54B482 ntfs SYSTEM /dev/sda2 C2766BF6766BEA1D ntfs OS /dev/sda3 BE6CA31D6CA2CF87 ntfs HP_RECOVERY /dev/sda promise_fasttrack_raid_member /dev/sdb1 20B65685B6565B7C ntfs SYSTEM /dev/sdb2 B4467A314679F508 ntfs HP /dev/sdb3 6E10B7A410B77227 ntfs FACTORY_IMAGE /dev/sdb4: PTTYPE="dos" /dev/sdb5 266f9801-cf4f-4acc-affa-2092be035f0c ext4 /dev/sdb6 1df35749-a887-45ff-a3de-edd52239847d swap /dev/sdb: PTTYPE="dos" error: /dev/mapper/pdc_bdadcfbdif3: No such file or directory error: /dev/sdc: No medium found error: /dev/sdd: No medium found error: /dev/sde: No medium found error: /dev/sdf: No medium found error: /dev/sdg: No medium found ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sdb5 / ext4 (rw,errors=remount-ro,commit=0) =========================== sdb5/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 2.6.38-8-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c linux /boot/vmlinuz-2.6.38-8-generic-pae root=UUID=266f9801-cf4f-4acc- affa-2092be035f0c ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.38-8-generic-pae } menuentry 'Ubuntu, with Linux 2.6.38-8-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c echo 'Loading Linux 2.6.38-8-generic-pae ...' linux /boot/vmlinuz-2.6.38-8-generic-pae root=UUID=266f9801-cf4f-4acc-affa-2092be035f0c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.38-8-generic-pae } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sdb1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(/dev/sdb,msdos1)' search --no-floppy --fs-uuid --set=root 20B65685B6565B7C chainloader +1 } menuentry "Windows Recovery Environment (loader) (on /dev/sdb3)" --class windows --class os { insmod part_msdos insmod ntfs set root='(/dev/sdb,msdos3)' search --no-floppy --fs-uuid --set=root 6E10B7A410B77227 drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sdb5/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sdb5 during installation UUID=266f9801-cf4f-4acc-affa-2092be035f0c / ext4 errors=remount-ro 0 1 # swap was on /dev/sdb6 during installation UUID=1df35749-a887-45ff-a3de-edd52239847d none swap sw 0 0 =================== sdb5: Location of files loaded by Grub: =================== 900.1GB: boot/grub/core.img 825.0GB: boot/grub/grub.cfg 688.7GB: boot/initrd.img-2.6.38-8-generic-pae 688.0GB: boot/vmlinuz-2.6.38-8-generic-pae 688.7GB: initrd.img 688.0GB: vmlinuz =========================== Unknown MBRs/Boot Sectors/etc ======================= Unknown BootLoader on pdc_bdadcfbdif3 =======Devices which don't seem to have a corresponding hard drive============== sdc sdd sde sdf sdg =============================== StdErr Messages: =============================== ERROR: dos: partition address past end of RAID device hexdump: /dev/mapper/pdc_bdadcfbdif3: No such file or directory hexdump: /dev/mapper/pdc_bdadcfbdif3: No such file or directory ERROR: dos: partition address past end of RAID device

    Read the article

  • Visual Studio Shortcut: Surround With

    - by Jeff Widmer
    I learned a new Visual Studio keyboard shortcut today that is really awesome; the “Surround With” shortcut.  You can trigger the Surround With context menu by pressing the Ctrl-K, Ctrl-S key combination when on a line of code. Ctrl-K, Ctrl-S means to hold down the Control key and then press K and then while still holding down the Control key press S. Here is where this comes in handy: You type a line of code and then realize you need to put it within an if statement block. So you type “if” and hit tab twice to insert the if statement code snippet.  Then you highlight the previous line of code that you typed, and then either drag and drop it into the if-then block or cut and paste it.  That is not too bad but it is a lot of extra key clicks and mouse moves. Now try the same with the Surround With keyboard shortcut.  Just highlight that line of code that you just typed and press Ctrl-K, Ctrl-S and choose the if statement code snippet, hit tab, and POW!... you are done!  No more code moving/indenting required. Here is what the Surround With context menu looks like: Just up or down arrow inside the drop down list to the code snippet that you want to surround your currently selected text with.  Did I mention this is AWESOME! Now it is so simple to surround lines of code with an if-then block or a try-catch-finally block... things that usually took several key clicks and maybe one or two mouse moves. And this works in both Visual Studio 2008 and Visual Studio 2010 which means it has been around for a long time and I never knew about it.   Technorati Tags: Visual Studio Keyboard Shortcut

    Read the article

  • Use a Free Tool to Edit, Delete, or Restore the Default Hosts File in Windows

    - by Lori Kaufman
    The hosts file in Windows contains mappings of IP addresses to host names, like an address book for your computer. Your PC uses IP addresses to find websites, so it needs to translate the host names into IP addresses to access websites. When you enter a host name in a browser to visit a website, that host name is looked up in DNS servers to find the IP address. If you enter IP addresses and host names for websites you visit often, these websites will load faster, because the hosts file is loaded into memory when Windows start and overrides DNS server queries, creating a shortcut to the sites. Because the hosts file is checked first, you can also use it to block websites from tracking your activities on the internet, as well as block ads, banners, third-party cookies, and other intrusive elements on webpages. Your computer has its own host address, known as its “localhost” address. The IP address for localhost is 127.0.0.1. To block sites and website elements, you can enter the host name for the unwanted site in the hosts file and associate it with the localhost address. Blocking ads and other undesirable webpage elements, can also speed up the loading of websites. You don’t have to wait for all those items to load. The default hosts file that comes with Windows does not contain any host name/IP address mappings. You can add mappings manually, such as the IP address 74.125.224.72 for www.google.com. As an example of blocking an ad server website, you can enter the following line in your hosts file to block doubleclick.net from serving you ads. How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It

    Read the article

  • Menu widget - no jQuery nor Javascript required - pure CSS

    - by Renso
    Goal: Create a menu widget that does not require any javascript, extremely lightweight, very fast, soley based on CSS, compatible with FireFox and Chrome. Issues: May have some rendering issues in some versions of IE, sorry :-) Instruments: css file html with specific menu format jQuery-ui library - optional if you want to use your own images/colors Implementation Details: HTML: <div id="header">   <div id="header_Menubar">     <ul class="linkList0 ui-tabs-nav ui-helper-reset ui-helper-clearfix ui-widget-header ui-corner-all">         <li class="first more ui-state-default ui-corner-top ui-tabs-selected"><a title="Home" href="/Home">Home</a>             <ul class="linkList01 ui-tabs-nav ui-helper-reset ui-helper-clearfix ui-widget-header ui-corner-all">                 <li class="ifirst ui-state-default ui-corner-top"><abbr title="Go Home"></abbr><a title="Home" href="/Home">Home</a></li>             </ul>         </li>         <li class="more ui-state-default ui-corner-top ui-tabs-selected"><a title="Menu 2" href="/Menu2a">Menu 2</a>             <ul class="linkList01 ui-tabs-nav ui-helper-reset ui-helper-clearfix ui-widget-header ui-corner-all">                 <li class="ifirst ui-state-default ui-corner-top"><abbr title="Menu 2 a"></abbr><a title="Menu 2 a" href="/Menu2a">Menu 2 a</a></li>                 <li class="ilast ui-state-default ui-corner-top"><abbr title="Menu 2 b"></abbr><a title="Menu 2 b" href="/Menu2b">Menu 2 b</a></li>             </ul>         </li>         <li class="more red ui-state-default ui-corner-top ui-tabs-selected"><a title="Menu 3" href="/Menu3 d">Menu 3</a>             <ul class="linkList01 ui-tabs-nav ui-helper-reset ui-helper-clearfix ui-widget-header ui-corner-all">                 <li class="ifirst ui-state-default ui-corner-top"><abbr title="Menu 3 a"><a title="Menu 3 a" href="/Menu3a">Menu 3 a</a></abbr></li>                 <li class="ui-state-default ui-corner-top"><abbr title="Menu 3 b"><a title="Menu 3 b" href="/Menu3b">Menu 3 b</a></abbr></li>                 <li class="ui-state-default ui-corner-top"><abbr title="Menu 3 c"><a title="Menu 3 c" href="/Menu3c">Menu 3 c</a></abbr></li>                 <li class="ilast ui-state-default ui-corner-top"><abbr title="Menu 3 d"><a title="Menu 3 d" href="/Menu3d">Menu 3 d</a></abbr></li>             </ul>         </li>     </ul>     </div> </div> CSS: /*    =Menu     -----------------------------------------------------------------------------------------    */ #header #header_Menubar {     margin: 0;     padding: 0;     border: 0;     width: 100%;     height: 22px; } #header {     background-color: #99cccc;     background-color: #aaccee;     background-color: #5BA3E0;     background-color: #006cb1; } /* Set menu bar background color     */ #header #header_Menubar {     background-attachment: scroll;     background-position: left center;     background-repeat: repeat-x; } /*    Set main (horizontal) menu typology    */ #header .linkList0 {     padding: 0 0 1em 0;     margin-bottom: 1em;     font-family: 'Trebuchet MS', 'Lucida Grande',           Verdana, Lucida, Geneva, Helvetica,           Arial, sans-serif;     font-weight: bold;     font-size: 1.085em;     font-size: 1em; } /*    Set all ul properties    */ #header .linkList0, #header .linkList0 ul {     list-style: none;     margin: 0;     padding: 0;     list-style-position: outside; } /*    Set all li properties    */ #header .linkList0 > li {     float: left;     position: relative;     font-size: 90%;     margin: 0 0 -1px;     width: 9.7em;     padding-right: 2em;     z-index: 100;    /*IE7:    Fix for IE7 hiding drop down list behind some other page elements    */ } /*    Set all li properties    */ #header .linkList01 > li {     width: 190px; } #header .linkList0 .linkList01 li {     margin-left: 0px; } /*    Set all list background image properties    */ /*#header .linkList0 li a {     background-position: left center;     background-image: url(  '../Content/Images/VerticalButtonBarGradientFade.png' );     background-repeat: repeat-x;     background-attachment: scroll; }*/ /*    Set all A ancor properties    */ #header .linkList0 li a {     display: block;     text-decoration: none;     line-height: 22px; } /*    IE7: Fix for a bug in IE7 where the margins between list items is doubled - need to set height explicitly    */ *+html #header .linkList0 ul li {     height: auto;     margin-bottom: -.3em; } /*    Menu:    Set different borders for different nested level lists     --------------------------------------------------------------    */ #header .linkList0 > li a {     border-left: 10px solid Transparent;     border-right: none; } #header .linkList0 > li a {     border-left: 0px;     margin-left: 0px;     border-right: none; } #header .linkList0 .linkList01 > li a {     border-left: 8px solid #336699;     border-right: none;     border: 1px solid Transparent;     -moz-border-radius: 5px 5px 5px 5px;     -moz-box-shadow: 3px 3px 4px #696969; } #header .linkList0 .linkList01 .linkList001 > li a {     border-left: 6px solid #336699;     border-right: none;     border: 1px solid Transparent;     -moz-border-radius: 5px 5px 5px 5px;     -moz-box-shadow: 3px 3px 4px #696969; } #header .linkList0 .linkList01 .linkList001 .linkList0001 > li a {     border-left: 4px solid #336699;     border-right: none;     border: 1px solid Transparent;     -moz-border-radius: 5px 5px 5px 5px;     -moz-box-shadow: 3px 3px 4px #696969; }     /*    Link and Visited pseudo-class settings for all lists (ul)    */ #header .linkList0 a:link, #header .linkList0 a:visited {     display: block;     text-decoration: none;     padding-left: 1em; } /*    Hide all the nested/sub menu items    */ #header .linkList0 ul {     display: none;     padding: 0;     position: absolute;    /*Important: must not impede on other page elements when drop down opens up    */ } /*    Hide all detail popups    */ #header .detailPopup {     display: none; } /*    Set the typology of all sub-menu list items li    */ /*#header .linkList0 ul li {     background-color: #AACCEE;     background-position: left center;     background-image: url(  '../Content/Images/VerticalButtonBarGradientFade.png' );     background-repeat: repeat-x;     background-attachment: scroll; }*/ #header .linkList0 ul li.more {     background: Transparent url('../Content/Images/ArrowRight.gif') no-repeat right center; } /*    Header list's margin and padding for all list items    */ #header .linkList0 ul li {     margin: 0 0 0 1em;     padding: 0; } #header .linkList01 ul li {     margin: 0;     padding: 0;     width: 189px; } /*    Set margins for the third li sibling (Plan a Call) to display to the right of the parent menu     to avoid the sub-menu overlaying the menu items below    */ #header .linkList0 li.more .linkList01 li.more > ul.linkList001 {     margin: -1.7em 0 0 13.2em;    /*Important, must be careful, if tbe EM since gap increases too much bewteen nested lists the gap will make the nested-list collapse prematurely    */ } /*    Set right hand arrow for list items with sub-menus (class-more)    */ #header li.more {     background: Transparent url('../Content/Images/ArrowRight.gif') no-repeat right center;     padding-right: 48px; } /*    Menu:    Dynamic Behavior of menu items (hover, visted, etc)     -----------------------------------------------------------    */ #header .linkList0 li a:link, #header .linkList01 li a:link {     display: block; } #header .linkList0 li a:visited, #header .linkList01 li a:visited {     display: block; } #header .linkList0 > li:hover { } #header .linkList01 > li:hover a ,#header .linkList001 > li:hover a {     text-decoration: underline; } #header .linkList0 > li abbr:hover span.detailPopup {     display: block;     position: absolute;     top: 1em;     left: 17em;     border: double 1px #696969;     border-style: outset;     width: 120%;     height: auto;     padding: 5px;     font-weight: 100; } #header .linkList0 > li:hover ,#header .linkList0 .linkList01 > li:hover { } #header .linkList0 .linkList01 .linkList001 > li:hover { } #header .linkList0 .linkList01 .linkList001 .linkList0001 > li:hover { } /*    Display the hidden sub menu when hovering over the parent ul's li    */ #header .linkList0 li:hover > ul {     display: block; } /*    Display the hidden sub menu when hovering over the parent ul's li    */ #header .linkList0 .linkList01 li:hover > ul {     display: block;         background: -moz-linear-gradient(top, #1E83CC, #619FCD);     /* Chrome, Safari:*/     background: -webkit-gradient(linear,                 center top, center bottom, from(#1E83CC), to(#619FCD)); } /*    Display the hidden sub menu when hovering over the parent ul's li    */ #header .linkList0 .linkList01 .linkList001 li:hover > ul {     display: block; } /*    Set right hand arrow for list items with sub-menus (class-more) on hover    */ #header li.more:hover { } Also some CSS for global settings that will affect this menu, you of course will have some other styling, but included it here so you can see how/why some css properties were set here: /* Neutralize styling:    Elements we want to clean out entirely: */ html, body {     margin: 0;     padding: 0;     font: 62.5%/120% Verdana, Arial, Helvetica, sans-serif; } /* Neutralize styling:    Elements with a vertical margin: */ h1, h2, h3, h4, h5, h6, p, pre, blockquote, ul, ol, dl, address {     margin: 0;    /*    most browsers set some default value that is not shared by all browsers    */     padding: 0;        /*    some borowsers default padding, set to 0 for all    */ } /* Apply left margin:    Only to the few elements that need it: */ li, dd, blockquote {     margin-left: 1em; }

    Read the article

  • Google-Chrome 10 stable crash on every page

    - by Achu
    I installed google-chrome today, when i open any page including askubuntu i got this error message. i see my memory usage is normal(Memory 56% and swap 4.8%) also I reload and i go to another page same problem What is the problem? the last dmesg output [26612.341865] lo: Disabled Privacy Extensions [29651.852476] chrome[15472] general protection ip:1528e26 sp:7fff514a9dc0 error:0 in chrome[400000+3082000] [31447.190586] [UFW BLOCK] IN=eth1 OUT= MAC=00:1c:25:a1:e7:67:00:16:3e:28:5a:b7:08:00 SRC=172.23.100.6 DST=172.23.20.128 LEN=69 TOS=0x00 PREC=0x00 TTL=128 ID=15939 PROTO=UDP SPT=4243 DPT=161 LEN=49 [31451.250190] [UFW BLOCK] IN=eth1 OUT= MAC=00:1c:25:a1:e7:67:00:16:3e:28:5a:b7:08:00 SRC=172.23.100.6 DST=172.23.20.128 LEN=69 TOS=0x00 PREC=0x00 TTL=128 ID=16180 PROTO=UDP SPT=4243 DPT=161 LEN=49 [31454.260150] [UFW BLOCK] IN=eth1 OUT= MAC=00:1c:25:a1:e7:67:00:16:3e:28:5a:b7:08:00 SRC=172.23.100.6 DST=172.23.20.128 LEN=69 TOS=0x00 PREC=0x00 TTL=128 ID=16322 PROTO=UDP SPT=4243 DPT=161 LEN=49 [31458.648164] [UFW BLOCK] IN=eth1 OUT= MAC=00:1c:25:a1:e7:67:00:16:3e:28:5a:b7:08:00 SRC=172.23.100.6 DST=172.23.20.128 LEN=69 TOS=0x00 PREC=0x00 TTL=128 ID=16513 PROTO=UDP SPT=4243 DPT=161 LEN=49 [33124.300112] lo: Disabled Privacy Extensions [33601.021406] Skipping EDID probe due to cached edid [34594.043501] chrome[15746]: segfault at 0 ip 0000000000d5cdd0 sp 00007fff5149ec20 error 6 in chrome[400000+3082000] [34597.395334] chrome[18112] general protection ip:17c85bf sp:7fff514aa4f0 error:0 in chrome[400000+3082000] [34616.786643] chrome[18124]: segfault at 1007 ip 00000000017c849f sp 00007fff514aabd0 error 4 in chrome[400000+3082000] [37277.436207] lo: Disabled Privacy Extensions [38549.501390] e1000e: eth1 NIC Link is Down [38551.122253] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [38551.122263] e1000e 0000:00:19.0: eth1: 10/100 speed: disabling TSO

    Read the article

  • Numbered list with subclauses

    - by Barry Clearwater
    I'm trying to create a legal document with decimal numbered subclauses, then alpha and roman subsub and subsubsub clauses. (whew!) `1. MAIN HEADING 1.1 This is an example of a sub-clause and you can see that even though the words continue on to the right, it would be best if it wrapped around and formed a block to the right of the decimal number 1.2 In doing so the normal second clause should also wrap around but the second subsequent clause should hang in from the left and be in a block. See below for the remaining clauses (a) this list is completely for demonstration and should not be construed as legal language in any way, nor should make sense in that (b) should the indentation take more than: i) this many lines it would be overly big 11) legal numbering continues in the sub-sub clauses with the use of lower roman lettering and should flow below in a block iii) and continue the formatting on to the next line but be underneath the body of the the text and not begin directly below the number itself. In this example the text carries out to the right but I need it to wrap around underneath. Sorry its so wordy, need this to show the example. 2. Second Clause Heading 2.1 and so it continues thus I've found the examples for decimal numbering but they do not create a block out to the right of the number, and they carry on with multiple decimals rather than alpha and roman sub clauses.

    Read the article

  • Introducing the New Boot Framework in CE 7

    - by Kate Moss' Open Space
    CE 7 introduces a new boot loader framework, BLDR (platform\common\src\common\bldr\). Some people like its powerful and flexbility, others may feel its too complicate as a boot loader framework. Despite to the favor, it is already there; so let's take a look at its features. Unlike the previous BL framwork (CE7 still provides it in platform\common\src\common\boot\) is a monolithic library, the new framework has more architecture structure. It not only defines main body but also provides rich components, such as filesystem (BinFS/FAT), download transportations, display, logging and block devices: bios INT13, FAL, IDE, Flash ( and etc. Note that in the block device category, the FAL is for legacy FMD/FAL, Flash is for latest MSFlash. Some of you may have encountered MSFlash MDD/PDD compatible partition is hard to created in bootloader and now it provides a clean solution! (Since this is a big topic, I will introduce it in future post) Today, I am going to show you some basic helper components - Image Loading functions. When OS image stored in the block device, it can be a file format, says your NK.BIN in the FAT volume or a RAW format, says the image is programmed to a BINFS partition. For the first one you can use BootFileSystemReadBinFile (platform\common\src\common\bldr\fileSystem\utils\fileSystemReadBinFile.c) and use BootBlockLoadBinFsImage (platform\common\src\common\bldr\block\utils\loadBinFs.c) to load from a partition. Need a sample code? No problem, the BootLoaderLoadOs in platform\cepc\src\boot\bldr\loados.c just provide a perfect example.

    Read the article

  • How to determine if a 3D voxel-based room is sealed, efficiently

    - by NigelMan1010
    I've been having some issues with efficiently determining if large rooms are sealed in a voxel-based 3D rooms. I'm at a point where I have tried my hardest to solve the problem without asking for help, but not tried enough to give up, so I'm asking for help. To clarify, sealed being that there are no holes in the room. There are oxygen sealers, which check if the room is sealed, and seal depending on the oxygen input level. Right now, this is how I'm doing it: Starting at the block above the sealer tile (the vent is on the sealer's top face), recursively loop through in all 6 adjacent directions If the adjacent tile is a full, non-vacuum tile, continue through the loop If the adjacent tile is not full, or is a vacuum tile, check if it's adjacent blocks are, recursively. Each time a tile is checked, decrement a counter If the count hits zero, if the last block is adjacent to a vacuum tile, return that the area is unsealed If the count hits zero and the last block is not a vacuum tile, or the recursive loop ends (no vacuum tiles left) before the counter is zero, the area is sealed If the area is not sealed, run the loop again with some changes: Checking adjacent blocks for "breathable air" tile instead of a vacuum tile Instead of using a decrementing counter, continue until no adjacent "breathable air" tiles are found. Once loop is finished, set each checked block to a vacuum tile. Here's the code I'm using: http://pastebin.com/NimyKncC The problem: I'm running this check every 3 seconds, sometimes a sealer will have to loop through hundreds of blocks, and a large world with many oxygen sealers, these multiple recursive loops every few seconds can be very hard on the CPU. I was wondering if anyone with more experience with optimization can give me a hand, or at least point me in the right direction. Thanks a bunch.

    Read the article

  • Wireless switch on Dell XT2 - strange behaviour of rfkill

    - by DyP
    I have an Dell Latitude XT2 using an Intel WLAN card (lspci lists it as "Intel Corporation Ultimate N WiFi Link 5300") running Lubuntu 12.04 with recent updates. The laptop has a hardware WLAN switch. I have problems activating the WLAN when booting with the hardware switch set to "off". The situation is a bit confusing, unfortunately. rfkill lists two WLAN devices (though lspci only shows the Intel one). This is the situation when booting with the hardware switch set to "Off": 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes From some tests, I conclude WLAN is only activated when both, the dell-wifi and phy0, are unblocked by soft- and hardware. But I can only unblock dell-wifi after the hardware switch is set to "on". Procedure right from boot with hardware switch set to "Off": Soft-unblocking phy0 works as expected. Could be done by start-up script. sudo rfkill unblock 0: nothing happens. Soft block of dell-wifi not removed. Set the hardware switch to "on": phy0 gets its hard block removed. Still no WLAN. sudo rfkill unblock 0: both the soft and hard lock of dell-wifi are removed. WLAN is now active and works. sudo rfkill block 0: only adds the soft block as expected. WLAN goes off again. So, in order to activate WLAN, I have to use the hardware switch and afterwards (manually) run a script - that's a bit inconvenient. Does someone know a better solution? Maybe a daemon could help that listens to rfkill events to unblock dell-wifi after I have set the hardware switch to "on"? (sounds like another workaround) When booting with the hardware switch set to "On", nothing is blocked neither hard nor soft.

    Read the article

  • TileEntitySpecialRenderer only renders from certain angle

    - by Hullu2000
    I'm developing a Minecraft mod with Forge. I've added a tileentity and a custom renderer for it. The problem is: The block is only visible from sertain angles. I've compaed my code to other peoples code and it looks pretty much like them. The block is opaque and not to be rendered and the renderer is registered normally so the fault must be in the renderer. Here's the renderer code: public class TERender extends TileEntitySpecialRenderer { public void renderTileEntityAt(TileEntity tileEntity, double d, double d1, double d2, float f) { GL11.glPushMatrix(); GL11.glTranslatef((float)d, (float)d1, (float)d2); HeatConductTileEntity TE = (HeatConductTileEntity)tileEntity; renderBlock(TE, tileEntity.getWorldObj(), tileEntity.xCoord, tileEntity.yCoord, tileEntity.zCoord, mod.EMHeatConductor); GL11.glPopMatrix(); } public void renderBlock(HeatConductTileEntity tl, World world, int i, int j, int k, Block block) { Tessellator tessellator = Tessellator.instance; GL11.glColor3f(1, 1, 1); tessellator.startDrawingQuads(); tessellator.addVertex(0, 0, 0); tessellator.addVertex(1, 0, 0); tessellator.addVertex(1, 1, 0); tessellator.addVertex(0, 1, 0); tessellator.draw(); } }

    Read the article

  • ??OPEN CURSOR?BULK COLLECT

    - by Liu Maclean(???)
    ????T.askmaclean.com?????bulk collect?open cursor???, ?????????  ??????: ???? OPEN_CURSOR ????SQL?? ???????. ?????? ????? ???????????????? ????? test_soruce create table zengfankun_temp01 as select * from dba_objects;select count(*) from zengfankun_temp01;–12,6826analyze table zengfankun_temp01 compute statistics; create or replace procedure test_open_cursor istype type_owner is table of zengfankun_temp01.owner%type index by binary_integer;type type_object_name is table of zengfankun_temp01.object_name%type index by binary_integer;type type_object_id is table of zengfankun_temp01.object_id%type index by binary_integer;type type_object_type is table of zengfankun_temp01.object_type%type index by binary_integer;type type_last_ddl_time is table of zengfankun_temp01.last_ddl_time%type index by binary_integer; l_ary_owner type_owner;l_ary_object_name type_object_name;l_ary_object_id type_object_id;l_ary_object_type type_object_type;l_ary_last_ddl_time type_last_ddl_time; cursor cur_object isselect owner,object_name,object_id,object_type,last_ddl_timefrom zengfankun_temp01order by owner,object_name,object_type,last_ddl_time;OPEN_START number;OPEN_END number;FETCH_START number;FETCH_END number;beginDBMS_OUTPUT.ENABLE (buffer_size=>null) ;OPEN_START:=dbms_utility.get_time();open cur_object;OPEN_END :=dbms_utility.get_time();dbms_output.put_line(‘OPEN_TIME:’||TO_CHAR(OPEN_END-OPEN_START));loopFETCH_START:=dbms_utility.get_time();fetch cur_object bulk collect intol_ary_owner,l_ary_object_name,l_ary_object_id,l_ary_object_type,l_ary_last_ddl_timelimit 10000;FETCH_END:=dbms_utility.get_time();dbms_output.put_line(‘FETCH_TIME:’||TO_CHAR(FETCH_END-FETCH_START)||’ ROWCOUNT:’||cur_object%rowCount); exit when cur_object%notfound or cur_object%notfound is null;end loop;end test_open_cursor; OPEN_TIME:12FETCH_TIME:21 ROWCOUNT:10000FETCH_TIME:3 ROWCOUNT:20000FETCH_TIME:3 ROWCOUNT:30000FETCH_TIME:3 ROWCOUNT:40000FETCH_TIME:3 ROWCOUNT:50000FETCH_TIME:3 ROWCOUNT:60000FETCH_TIME:3 ROWCOUNT:70000FETCH_TIME:3 ROWCOUNT:80000FETCH_TIME:3 ROWCOUNT:90000FETCH_TIME:3 ROWCOUNT:100000FETCH_TIME:3 ROWCOUNT:110000FETCH_TIME:3 ROWCOUNT:120000FETCH_TIME:1 ROWCOUNT:126826 ???? OPEN_TIME:0FETCH_TIME:18 ROWCOUNT:10000FETCH_TIME:3 ROWCOUNT:20000FETCH_TIME:3 ROWCOUNT:30000FETCH_TIME:3 ROWCOUNT:40000FETCH_TIME:3 ROWCOUNT:50000FETCH_TIME:3 ROWCOUNT:60000FETCH_TIME:3 ROWCOUNT:70000FETCH_TIME:3 ROWCOUNT:80000FETCH_TIME:3 ROWCOUNT:90000FETCH_TIME:3 ROWCOUNT:100000FETCH_TIME:3 ROWCOUNT:110000FETCH_TIME:3 ROWCOUNT:120000FETCH_TIME:2 ROWCOUNT:126826 SQL?????????, ????????????.??OPEN CURSOR ????0???????????3??.??N? ??????. ???? ?N? ?????????? ??????. ??????????????? ??????????. ?????????10000??? ???????????????????clear???, ???????????: ?OPEN CURSOR ?????, PL/SQL????SQL????PARSE SQL????????, ??????OPEN CURSOR????SNAPSHOT SCN ??SCN, ??Oracle?????FETCH?????,???????????????? ????FETCH ??????????????,???????Current Block, The most recent version of block , ?????SCN >> Snapshot scn, ????UNDO???? ???SCN ???Best Block ,???Read Consistentcy;???? ???UNDO SNAPSHOT???????????????Best Block??,???????ORA-1555??? ????????, ??????????,???????????????char(2000)????, ???????????????,????bulk collect fetch??fetch 10 ???,????????OPEN CURSOR?????PARSE??SQL????????, ??????????fetch bulk collect??????????10????,??”_trace_pin_time”????Server Process?pin CR block???,??????????Fetch Bulk Collect limit 10??10?buffer?pin? [oracle@nas ~]$ sqlplus / as sysdba SQL*Plus: Release 11.2.0.3.0 Production on Wed Aug 1 11:36:52 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, OLAP, Data Mining and Real Application Testing options SQL> select * from global_name; GLOBAL_NAME -------------------------------------------------------------------------------- http://www.askmaclean.com SQL> create table maclean (t1 char(2000)) tablespace users pctfree 99; Table created. SQL> begin 2 for i in 1..200 loop 3 insert into maclean values('MACLEAN'); 4 commit ; 5 end loop; 6 end; 7 / PL/SQL procedure successfully completed. SQL> exec dbms_stats.gather_table_stats('','MACLEAN'); PL/SQL procedure successfully completed. SQL> select count(*) from maclean; COUNT(*) ---------- 200 SQL> select blocks,num_rows from dba_tables where table_name='MACLEAN'; BLOCKS NUM_ROWS ---------- ---------- 244 200 SQL> alter system set "_trace_pin_time"=1 scope=spfile; System altered. SQL> startup force; ORACLE instance started. Total System Global Area 3140026368 bytes Fixed Size 2232472 bytes Variable Size 1795166056 bytes Database Buffers 1325400064 bytes Redo Buffers 17227776 bytes Database mounted. Database opened. SQL> alter session set events '10046 trace name context forever,level 12'; Session altered. SQL> SQL> SQL> declare 2 cursor v_cursor is 3 select * from sys.maclean; 4 type v_type is table of sys.maclean%rowtype index by binary_integer; 5 rec_tab v_type; 6 begin 7 open v_cursor; 8 dbms_lock.sleep(30); 9 loop 10 fetch v_cursor bulk collect 11 into rec_tab limit 10; 12 dbms_lock.sleep(10); 13 exit when v_cursor%notfound; 14 end loop; 15 end; 16 / ?????10046 trace+ pin trace: PARSING IN CURSOR #47499559136872 len=337 dep=0 uid=0 oct=47 lid=0 tim=1343836146412056 hv=496860239 ad='11a11dbb0' sqlid='4zh7954ftuz2g' declare cursor v_cursor is select * from sys.maclean; type v_type is table of sys.maclean%rowtype index by binary_integer; rec_tab v_type; begin open v_cursor; dbms_lock.sleep(30); loop fetch v_cursor bulk collect into rec_tab limit 10; dbms_lock.sleep(10); exit when v_cursor%notfound; end loop; end; END OF STMT PARSE #47499559136872:c=0,e=346,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=0,tim=1343836146412051 ===================== PARSING IN CURSOR #47499559126280 len=25 dep=1 uid=0 oct=3 lid=0 tim=1343836146414939 hv=3296884535 ad='11a11d250' sqlid='2mb1493284xtr' SELECT * FROM SYS.MACLEAN END OF STMT PARSE #47499559126280:c=1999,e=2427,p=0,cr=0,cu=0,mis=1,r=0,dep=1,og=1,plh=2568761675,tim=1343836146414937 EXEC #47499559126280:c=0,e=55,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=1,plh=2568761675,tim=1343836146415104 ????? ? SELECT * FROM SYS.MACLEAN? PARSE ????? , ????FETCH???????pin ????????, ????OPEN CURSOR????? *** 2012-08-01 11:49:36.424 WAIT #47499559136872: nam='PL/SQL lock timer' ela= 30009361 duration=0 p2=0 p3=0 obj#=-1 tim=1343836176424782 ???30s pin ktewh26: kteinpscan dba 0x10a6202:4 time 1039048805 pin ktewh27: kteinmap dba 0x10a6202:4 time 1039048847 pin kdswh11: kdst_fetch dba 0x10a6203:1 time 1039048898 pin kdswh11: kdst_fetch dba 0x10a6204:1 time 1039048961 pin kdswh11: kdst_fetch dba 0x10a6205:1 time 1039049004 pin kdswh11: kdst_fetch dba 0x10a6206:1 time 1039049042 pin kdswh11: kdst_fetch dba 0x10a6207:1 time 1039049089 pin kdswh11: kdst_fetch dba 0x10a6208:1 time 1039049123 pin kdswh11: kdst_fetch dba 0x10a6209:1 time 1039049159 pin kdswh11: kdst_fetch dba 0x10a620a:1 time 1039049191 pin kdswh11: kdst_fetch dba 0x10a620b:1 time 1039049225 pin kdswh11: kdst_fetch dba 0x10a620c:1 time 1039049260 kdst_fetch???fetch??????? , ??fetch?10?? ???????FETCH FETCH #47499559126280:c=0,e=536,p=0,cr=12,cu=0,mis=0,r=10,dep=1,og=1,plh=2568761675,tim=1343836176425542 *** 2012-08-01 11:49:46.428 WAIT #47499559136872: nam='PL/SQL lock timer' ela= 10002694 duration=0 p2=0 p3=0 obj#=-1 tim=134383618642829 ????10s pin kdswh11: kdst_fetch dba 0x10a620d:1 time 1049052211 pin kdswh11: kdst_fetch dba 0x10a620e:1 time 1049052264 pin kdswh11: kdst_fetch dba 0x10a620f:1 time 1049052299 pin kdswh11: kdst_fetch dba 0x10a6211:1 time 1049052332 pin kdswh11: kdst_fetch dba 0x10a6212:1 time 1049052364 pin kdswh11: kdst_fetch dba 0x10a6213:1 time 1049052398 pin kdswh11: kdst_fetch dba 0x10a6214:1 time 1049052430 pin kdswh11: kdst_fetch dba 0x10a6215:1 time 1049052462 pin kdswh11: kdst_fetch dba 0x10a6216:1 time 1049052494 pin kdswh11: kdst_fetch dba 0x10a6217:1 time 1049052525 FETCH #47499559126280:c=0,e=371,p=0,cr=10,cu=0,mis=0,r=10,dep=1,og=1,plh=2568761675,tim=1343836186428807 ??pin 10????, ???fetch ?? WAIT #47499559136872: nam='PL/SQL lock timer' ela= 10002864 duration=0 p2=0 p3=0 obj#=-1 tim=1343836196431754 pin kdswh11: kdst_fetch dba 0x10a6218:1 time 1059055662 pin kdswh11: kdst_fetch dba 0x10a6219:1 time 1059055714 pin kdswh11: kdst_fetch dba 0x10a621a:1 time 1059055748 pin kdswh11: kdst_fetch dba 0x10a621b:1 time 1059055781 pin kdswh11: kdst_fetch dba 0x10a621c:1 time 1059055815 pin kdswh11: kdst_fetch dba 0x10a621d:1 time 1059055848 pin kdswh11: kdst_fetch dba 0x10a621e:1 time 1059055883 pin kdswh11: kdst_fetch dba 0x10a621f:1 time 1059055915 pin kdswh11: kdst_fetch dba 0x10a6221:1 time 1059055953 pin kdswh11: kdst_fetch dba 0x10a6222:1 time 1059055992 FETCH #47499559126280:c=0,e=385,p=0,cr=10,cu=0,mis=0,r=10,dep=1,og=1,plh=2568761675,tim=1343836196432274 ???? ??????? DBA????? ............................ ???? WAIT #47499559136872: nam='PL/SQL lock timer' ela= 10002933 duration=0 p2=0 p3=0 obj#=-1 tim=1343836366495589 pin kdswh11: kdst_fetch dba 0x10a62f6:1 time 1229119497 pin kdswh11: kdst_fetch dba 0x10a62f7:1 time 1229119545 pin kdswh11: kdst_fetch dba 0x10a62f8:1 time 1229119576 pin kdswh11: kdst_fetch dba 0x10a62f9:1 time 1229119610 pin kdswh11: kdst_fetch dba 0x10a62fa:1 time 1229119644 pin kdswh11: kdst_fetch dba 0x10a62fb:1 time 1229119671 pin kdswh11: kdst_fetch dba 0x10a62fc:1 time 1229119703 pin kdswh11: kdst_fetch dba 0x10a62fd:1 time 1229119730 pin kdswh11: kdst_fetch dba 0x10a62fe:1 time 1229119760 pin kdswh11: kdst_fetch dba 0x10a62ff:1 time 1229119787 FETCH #47499559126280:c=0,e=340,p=0,cr=10,cu=0,mis=0,r=10,dep=1,og=1,plh=2568761675,tim=1343836366496067 ??????DBA? 0x10a6203 , ??DBA ? 0x10a62ff ???????DBA??MACLEAN????????,???DBA???Maclean????? getbfno?????dba??????????? CREATE OR REPLACE FUNCTION getbfno (p_dba IN VARCHAR2) RETURN VARCHAR2 IS l_str VARCHAR2 (255) DEFAULT NULL; l_fno VARCHAR2 (15); l_bno VARCHAR2 (15); BEGIN l_fno := DBMS_UTILITY.data_block_address_file (TO_NUMBER (LTRIM (p_dba, '0x'), 'xxxxxxxx' ) ); l_bno := DBMS_UTILITY.data_block_address_block (TO_NUMBER (LTRIM (p_dba, '0x'), 'xxxxxxxx' ) ); l_str := 'datafile# is:' || l_fno || CHR (10) || 'datablock is:' || l_bno || CHR (10) || 'dump command:alter system dump datafile ' || l_fno || ' block ' || l_bno || ';'; RETURN l_str; END; / Function created. SQL> select getbfno('0x10a6203') from dual; GETBFNO('0X10A6203') -------------------------------------------------------------------------------- datafile# is:4 datablock is:680451 dump command:alter system dump datafile 4 block 680451; SQL> select getbfno('0x10a62ff') from dual; GETBFNO('0X10A62FF') -------------------------------------------------------------------------------- datafile# is:4 datablock is:680703 dump command:alter system dump datafile 4 block 680703; SQL> select dbms_rowid.rowid_block_number(min(rowid)),dbms_rowid.rowid_relative_fno(min(rowid)) from maclean; DBMS_ROWID.ROWID_BLOCK_NUMBER(MIN(ROWID)) ----------------------------------------- DBMS_ROWID.ROWID_RELATIVE_FNO(MIN(ROWID)) ----------------------------------------- 680451 4 SQL> select dbms_rowid.rowid_block_number(max(rowid)),dbms_rowid.rowid_relative_fno(max(rowid)) from maclean; DBMS_ROWID.ROWID_BLOCK_NUMBER(MAX(ROWID)) ----------------------------------------- DBMS_ROWID.ROWID_RELATIVE_FNO(MAX(ROWID)) ----------------------------------------- 680703 4 ???????3???: 1.?OPEN CURSOR ?????, PL/SQL????SQL????PARSE SQL????????, ??????OPEN CURSOR????SNAPSHOT SCN ??SCN, ??Oracle?????FETCH?????,???????????????? 2.????FETCH ?????????????? 3. ???open cursor+ fetch bulk collect???”?????????”

    Read the article

< Previous Page | 61 62 63 64 65 66 67 68 69 70 71 72  | Next Page >